YOUNG CHANG MUSIC KC10C Digital Piano User Manual kc 10 work 0812
YOUNG CHANG MUSIC (CHINA) CO., Ltd Digital Piano kc 10 work 0812
10 user manual
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
o Reorient or relocate the receiving antenna.
o Increase the separation between the equipment and receiver.
o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
o Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your
authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
The lightning flash with the arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
NO USER SERVICEABLE PARTS INSIDE.
DO NOT REMOVE THE COVER.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
IMPORTANT SAFETY & INSTALLATION INSTRUCTIONS
INSTRUCTIONS PERTAINING TO THE RISK OF FIRE ELECTRIC SHOCK , OR INJURY TO PERSONS
WARNING: When using electric products, basic precautions should
always be followed, including the following:
1. Read all the Safety and Installation Instructions and Explanation
of Graphic Symbols before using the product.
2. This product must be grounded. If it should malfunction or
break down, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This product
is equipped with a power supply cord having an equipment-
grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet which is properly installed and
grounded in accordance with all local codes and ordinances.
DANGER: Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Do not modify the
adaptor which defeats the function of the equipment-grounding
conductor. If you are in doubt as to whether the product is properly
3. Do not use this product near water Ð for example, near a bathtub,
washbowl, kitchen sink, in a wet basement, or near a swimming
pool, or the like.
4. This product should only be used with a stand or cart that is
recommended by the manufacturer.
5.
speakers or headphones, may be capable of producing sound
levels that could cause permanent hearing loss. Do not operate
for a long period of time at a high volume level or a level that is
uncomfortable. If you experience any hearing loss or ringing in
the ears, you should consult an audiologist.
6. This product should be located so that its location or position
does not interfere with its proper ventilation.
7. The product should be located away from heat sources such as
radiators, heat registers, or other products that produce heat.
8. The product should be connected to a power supply only of the
type described in the operating instructions or as marked on the
product.
9. This product may be equipped with a polarized line plug (one
blade wider than the other). This is a safety feature. If you are
unable to insert the plug into the outlet, contact an electrician to
replace your obsolete outlet. Do not defeat the safety purpose of
the plug.
10. The power supply cord of the product should be unplugged
from the outlet when left unused for a long period of time. When
unplugging the power supply cord, do not pull on the cord, but
grasp it by the plug.
11. Care should be taken so that objects do not fall and liquids are
not spilled into the enclosure through openings.
12.
when:
A. The power supply cord or the plug has been damaged;
B. Objects have fallen, or liquid has been spilled into the
product;
C. The product has been exposed to rain;
D. The product does not appear to be operating normally or
exhibits a marked change in performance;
E. The product has been dropped, or the enclosure damaged.
13. Do not attempt to service the product beyond that described in
the user maintenance instructions. All other servicing should be
14. WARNING: Do not place objects on the product’s power supply
cord, or place the product in a position where anyone could trip
over, walk on, or roll anything over cords of any type. Do not
allow the product to rest on or be installed over cords of any type.
hazard and/or personal injury.
RADIO AND TELEVISION INTERFERENCE
WARNING:
approved by Young Chang could void your authority to operate the
instrument.
IMPORTANT: When connecting this product to accessories and/or
other equipment use only high quality shielded cables.
NOTE: This instrument has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This instrument
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this instrument does cause harmful interference to radio or television
reception, which can be determined by turning the instrument off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Ŗ Reorient or relocate the receiving antenna.
Ŗ Increase the separation between the instrument and the receiver.
Ŗ Connect the instrument into an outlet on a circuit other than the
one to which the receiver is connected.
Ŗ If necessary consult your dealer or an experienced radio/television
technician for additional suggestions.
The normal function of this product may be disturbed by strong electro
magnetic interference. If so, simply reset the product to resume normal
operation by following the instruction manual. In case the function
could not resume, please use the product in another location.
NOTICE
This apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
AVIS
Le present appareil numerique n’emet pas de bruits radioelectriques
depassant les limites applicables aux appareils numeriques de la
class B prescrites dans le Reglement sur le brouillage radioelectrique
edicte par le ministere des Communications du Canada.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any of the ventilation openings. Install in accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
Allow adequate ventilation for the power adapter. Do not
hide it under a carpet or behind a curtain or place it in an enclosed space where heat buildup can
occur. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
9) Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
10)
11)
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
12) Unplug this apparatus during lightning storms or when unused for long periods of
time.
13)
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Warning:
such as vases, are placed on the equipment.
To completely disconnect this equipment from the AC Mains, disconnect the power supply cord plug
from the AC receptacle.
Congratulations on your purchase of a KC10C.
You’ll find it easy to learn, but it is equipped with sensitive components
inside of it.
Be sure to real the manual carefully as you continue to familiarize
yourself with the features and functions of the KC10C.
Thank you.
Contents
1. Power supply and Precautions
2. Getting Started
3. Basic Operations
4. Using Bluetooth
5. The Rear Panel
6. Connecting to External Sound Systems
7. Connecting to USB
8. Demo Songs
9. Troubleshooting
10. Specification
[
]
_
`
XW
XX
XX
XY
XZ
XZ
1. Power supply and Precautions
Power supply
KC10C runs on AC 100-2 0 Volts 60 Hz/DC15V 3A.
Power supply
If the power outlet is not the standard above,
it is recommended you use an appropriate adaptor.
Warning - For perfect operation and security, please read the manual carefully and keep
it for future reference.
Caution
Avoid a severe shock to reduce the risk of a trouble
Protect the keyboard and switches when they are moved
Ensure the volume to the minimum level before turn on the keyboard
Do not open inside. This product contains precision parts inside, so unnecessary
touch could cause a breakdown or an accident.
Turn off the power after use.
Unplug this apparatus when unused for long periods of time.
Do not apply excess force to the buttons and switches.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
Please connect the designated AC adaptor to an AC outlet of the correct voltage
This product should only be used with a standard voltage, if not, please use
an appropriate adaptor that is recommended by the manufacturer.
When you replace a fuse, only use a proper one.
Please open and close the keyboard cover carefully not to catch/trap hands or fingers.
4
Installation Site and Precautions
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that
produce heat.
es, and coffee cups, on the product.
into the instrument.
is needed, please contact the Young Chang
A/S center.
Do not use paint thinners, solvents, clean
ing fluids, or chemical-impregnated wiping
cloths
Power Switch, Volume, Bluetooth Pairing
Head phone
Pedal
GGG G
Thank for your purchase of a KC10C.
KC-10U is a new digital piano based on the latest technology.
Be sure to keep the manual on hand as you continue to familiarize yourself with the features
and functions of the KC10C.
Soft Pedal
Sostenuto Pedal
Sustain Pedal
Soft Pedal Sostenuto Pedal Sustain Pedal
QG
ೈ
Pedal
Power Supply
When the soft pedal is pressed, all notes played on the keyboard will have a softer effect.
When the sostenuto pedal is pressed, the notes played before you step on the pedal
would have a sustain effect.
When the sustain pedal is pressed, notes sustain longer.
Releasing the pedal immediately stops any sustained notes.
When you finish all setting up, plug the power cable into the appropriate outlet.
AC Plug is offered as a plug type suitable for a purchased location.
QGHeadphone Jack
Q
QGPower Switch
QGSelecting Functions
headphones simultaneously.
The internal speaker system is automatically shut off when the headphone is
Two sets of standard stereo headphones can be plugged in here for private prac-
tice or late-night playing. You can control the volume by using the Volume slider.
To avoid the risk of hearing loss when using headphones, please do not play the piano with
a high volume level for a long time.
Press and hold the “Soft Pedal” and “Sustain Pedal” simultaneously, then select a function key you desire.
For details on available functions, see the keyboard figure and check the information below.
QGDemo Song : There are select 50 demo songs.
QGChorus (Stereo Effect) - Piano sound can be played in three-dimensions as if it sings in chorus.
QGReverb (Resonance Effect) - This function changes the configuration of the effect to simulate
a wide array of room types.
then select a function key you desire.
The bottom left
of keyboard
Caution
Rotate the Volume slider clockwise, the volume increases and vice versa.
Headphone
KC10C runs on AC 100-240 Volts 60 Hz.
If your power outlet is not the standard above, it is recommended you use an
appropriate adaptor.
4
Pairing with Bluetooth Audio Device and Connection
Listening to music
Soft
Hard
QG :
: These keys can control the touch sensitivity of the keyboard.
To connect a smart device with KC-10U, pairing is needed.
1. Activate Bluetooth on your smart device, then press the pairing button located on the bottom
right of your keyboard. Instantly, your instrument makes a sound and the LED next to the pairing
button will start to blink.
3. If the connection is successful, the LED will stop blinking.
You can hear the music through the speaker after the connection with smart device.
Bluetooth
Pairing
KC-10U contains a function which is able listen to music by connecting smart devices wirelessly.
This function is useful when you use software instruments on your computer.
QGTouch Sensitivity
Demo songs 1~50 Touch
Sensitivity
Instrument
Controller
Power
Volume
LED
The bottom right
of the keyboard
5. The Rear Panel
GGGGGGGGGGGGGGG
5. Power Cord
instruments, computers and other related devices to connect and communicate with one another.
Connect the AC adaptor to the power supply cord.
through the speaker of your keyboard.
keyboard amplifier, audio system.
7. Connecting to USB
6. Connecting to External Sound Systems
Connecting to Your Audio System
Piano
Piano
Audio
AUX In
Audio
AUX In
You can transmit the audio signal of the piano to a keyboard amplifier, stereo sound system, mixing console or tape
You can enlarge the range of use on your instrument by connecting a PC to the USB terminal.
when you edit and record music.
There is no need to install any device driver when you connect (Plug and Play) and you can assign your device on
Be aware that additional programmes are not offered.
Demo songs 1~50
QGSelecting a Demo Song: Press and hold the “Soft Pedal” and “Sustain Pedal” simultaneously,
then select a demo song you desire.
Check if one of the following might be the issue.
Ebony and Ivory PolishExterior color
UprightAppearance
Voice Type
Keyboard
Additional
Function
Soft Pedal, Sostenuto Pedal, Sustain PedalPedal
50 Demo songs
Demo songs
Tone
Dimensions
100Kg - There can be a slight difference in weight. Weight
Speaker
100W
Power
Consumption
Capacity
KC10CStandard
9. Troubleshooting
10. Specification
Problem Cause Solution
when the keys are played.
Sometime the speaker
produce noise
1. The master volume is set in the
minimal level
2. Headphone is connected
an appropriate level
2. Disconnect the headphones
1. Use an another outlet from the
outlet used for the appliance
2. Put your instrument far from the
bulbs or the neon signs
an appropriate level
2. Replace it with the new
1. A noise neighboring electrical
appliances
2.A noise neighboring bulbs or
neon signs
1. The master volume is set in the
minimal level
2. The extension cord is faulty
-
er is connected
Please contact us If the problems continue
