Yunmai Technology M1680 Yunmai SE Smart Scale User Manual SE YUNMAI2

SHENZHEN YUNMAI TECHNOLOGY CO., LTD. Yunmai SE Smart Scale SE YUNMAI2

User Manual

YUNMAI SESmart Weight Scale InstructionsProduct Introduction and Installation 1 Install YUNMAI App on your phoneThank you for choosing YUNMAI SE Search “YUNMAI” in the Android Application Market or the iOS App Store or scan the following QR Code to download, install it and it will get connected to the scale once turned on.Concealed Display ScreenBattery Cover① Note: Remove the battery insulation to startScale FootSurfaceScan QR codeDownload <YUNMAI App>Note: To ensure the accuracy please stand on the scale barefoot with the right posture.3 Start UsingSet each foot on each side of the central point naturally as shown below: Correct Each foot on each side of the central point naturallyWrong Feet go out of the verge may affect the accuracyWrongStand in wrong direction will shield the screenWrongFeet not in a line may affect the accuracyDisplay Screen Product SpecificationsWarningBody Mass Index comparison tableMobile Device SupportMaintenanceWarranty BluetoothLow batteryindicatorWeighing figuresPoundsKilogramsBody Mass Index (BMI) = weight (kg) ÷ height ^ 2 (m)For example: BMI = 70kg ÷ (1.75m × 1.75m) = 22.86，belongs to the normal range.Note: BMI Index is a standard that is widely used to judge a person’s health condition.iOS8.0 and aboveiPhone 4S /5/5S /6/6 Plus/SE/6S/6S Plus /7/7 Plus/iPod touch /iPad Android 4.3 and above with Bluetooth 4.0Use a wet cloth to clean the scale. Do not use any detergent and don’t use water to wash it directly.YUNMAI SE guarantees a year of technical support and hardware warranty.Do not disassemble, squeeze, puncture the product or put it into water,fire, or exposes it to temperature higher than 60 ° C (140 ° F).Product Name: YUNMAI SE Smart Weight ScaleModel : M1680Measurement Unit: Kg/LbConnection : Bluetooth 4.0Size: 260 × 260 × 26 mmExecutive Standard: Q / HC 1 - 2015Net Weight: 1.2 KgWeighing Range: 3 - 180 KgAccuracy: ±50gWorking Temperature: -5 ℃ - 40 ℃Exterior Material: Eco-friendly ABSPower: 1.5V AA Battery x3For more information please visit www.iyunmai.comHotline: +86-755-8671-6230 Facebook : www.facebook.com/iyunmaiTwitter: twitter.com/YunmaiGlobalManufacturer: Shenzhen YUNMAI Technology Co., LtdAddress: Room 10D, 10F, 4C Building, Software Industry Base, Nanshan District, Shenzhen, ChinaBMI (for men and women)Age Overweight Underweight Normal Obese Grossly Overweight18.5-24.9 25-29.9 30-34.9 ≥ 35＜ 18.52 Connect to the scale via Bluetooth Open YUNMAI App and Bluetooth and it will get connected automatically, and your real-time data will sync to the App.iOS： Slide from the bottom of the screen to open the Control Center and click on the Android: Click on【Allow】to turn on Bluetooth when the system reminds you when open YUNMAI App【Bluetooth】 LogoAllowIgnoreAn application wants to open BluetoothAllowRejectAn application wants to open BluetoothEasy life, lighter! Using YUNMAI SE together with the App, you can not only record exercise consumption, food intake and other basic information, but also track your weight trends. YUNMAI helps to analyze on the Cloud and provide health reports and improvement recommendations.YUNMAI App Notice: Due to the frequent updates of YUNMAI App, this picture is for reference only. Please adhere to the real products in case of any change!FCC ID: 2ADEB-M1680This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference.(2)This device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.FCC Statement Me
2 App Installation 1 Activation 3 Get ConnectedSet each foot on each side of the central point naturally as shown below:4 Start UsingClick on【Me】3-2 Connect via WiFi1Place in the scope of WiFi in first connectionDevicePMconnect toYUNMAI minismart scaleYUNMAI Colorsmart scaleDevice Management YUNMAI 2smart scaleCancelPM“YUNMAI 2”Searching...keep close to the deviceClick on【Device】2 Click on【Device Connection】3Finish the process as indicated4Product IntroductionA ITO conductive coating x 4B Concealed Display ScreenC Reset KeyD USB Type-C charge portE SpeakerADBC EThank you for choosing YUNMAI 2 Smart Scale Place YUNMAI 2 on a flat floor and press the surface until the screen shows “YUNMAI” to activate it.Please lay the scale at a place with strong WiFi signal or near the router when it first get connected. WiFi signal will influence connecting time and stability.Under WiFi mode, as long as the scale and the phone are placed in the scope of the WiFi, then the data will be synchronized automatically to the App even without opening it. Open WiFi option on the phone and YUNMAI App and get connected as the following instructions:Search“YUNMAI” in the iOS App Store or Android Application Market or scan the following QR Code to download, install it and it will get connected to the scale once turned on.Download <YUNMAI App>Scan QR CodeWrongFeet go out of the verge may affect the accuracyCorrectEach foot on each side of the central point naturallyWrongFeet not in a line may affect the accuracyWrongStand in wrong direction will shield the screenNote: To ensure the accuracy please stand on the scale barefoot with the right posture.iOS 8.0 and aboveiPhone 4S/5/5S/6/6 Plus/SE/6S/6S Plus/7/7 PlusiPod touch /iPad Android 4.3 and above with Bluetooth 4.0Mobile Device SupportMeasurement results of YUNMAI 2 is only for reference, but professional medical advice. Measurement Range: 3-150 Kg.Important NoteDo not use low-quality plugs and cables. Refrain from long-time charging in case of short circuit. Do not charge in damp environment in case of electric leakage.Safe Power ChargingUse a wet cloth to clean the scale.Do not use any detergent and don’t use water to wash it directly.MaintenanceYUNMAI 2 Smart Scale guarantees a year of technical support and hardware warranty.WarrantyDisplay and StatusWiFi Connection Bluetooth Alarm Clock WiFi Signal ErrorLow Battery PowerFull Battery PowerBody FatUpgradingKg（Unit）lb (Unit)Weight gained Weight lost SunnyRainy SnowyTemperatureCloudy Body Statistics Table18-39Age40-5960-120＜51% Low≥51% NormalBody Fat Muscle RatioMaleBMI0-9.9% Low10-20.9% Normal21-25.9% Slightly obese26-60% Obese0-10.9% Low11-21.9% Normal22-26.9% Slightly obese27-60% Obese0-12.9% Low13-23.9% Normal24-28.9% Slightly obese29-60% Obese18-39Age40-5960-120＜46% Low≥46% NormalBody Fat Muscle RatioFemaleBMI0-9.9% Low10-33.9% Normal34-38.9% Slightly obese39-60% Obese0-20.9% Low21-34.9% Normal35-39.9% Slightly obese40-60% Obese0-21.9% Low22-35.9% Normal36-40.9% Slightly obese41-60% Obese＜ 18.5 Underweight18.5-24.9 Normal25-29.9 Overweight30-34.9 Obese≥ 35 Grossly Overweight＜ 18.5 Underweight18.5-24.9 Normal25-29.9 Overweight30-34.9 Obese≥ 35 Grossly OverweightNote: Juveniles have rapid physical developments and their body statistics, such as body fat, BMI and muscle rate may fluctuate largely, so it is difficult to get an accurate result except the weight.Product SpecificationProduct Name: YUNMAI 2 Smart ScaleModel : M1601Measurement Unit: Kg /LbConnection : Bluetooth 4.0, WiFiSize: 300 × 300 × 23 mmExecutive Standard: Q / HC 1 - 2015Net Weight: 1.9 KgWeighing Range: 3 - 180 KgAccuracy: ±50gWorking Temperature: -5 ℃ - 40 ℃Exterior Material: Eco-friendly ABS + PCBattery Type : Li-Polymer Battery For more information please visit www.iyunmai.comHotline: +86-755-8671-6230Facebook : www.facebook.com/iyunmaitwitter: twitter.com/YunmaiGlobalManufacturer: Shenzhen YUNMAI Technology Co., LtdAddress: Room 10D, 10F, 4C Building, Software Industry Base, Nanshan District, Shenzhen, ChinaSmart Scale Instructions3-1 Connect to the scale via Bluetooth Open YUNMAI App and Bluetooth and it will get connected automatically, and your real-time data will sync to the App.iOS： Slide from the bottom of the screen to open the Control Center and click on the Android: Click on【Allow】to turn on Bluetooth when the system reminds you when open YUNMAI App【Bluetooth】 LogoAllowIgnoreAn application wants to open BluetoothAllowRejectAn application wants to open BluetoothFCC ID: 2ADEB-M1601This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference.(2)This device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.FCC Statement Me

Navigation menu