Yaesu Musen 0H464X10 Bluetooth Adapter Unit User Manual BU 2 FCC EAH46U500 110524 pmd

Yaesu Musen Co., Ltd. Bluetooth Adapter Unit BU 2 FCC EAH46U500 110524 pmd

manual

Download: Yaesu Musen 0H464X10 Bluetooth Adapter Unit User Manual BU 2 FCC EAH46U500 110524 pmd
Mirror Download [FCC.gov]Yaesu Musen 0H464X10 Bluetooth Adapter Unit User Manual BU 2 FCC EAH46U500 110524 pmd
Document ID1477837
Application ID8tmb646uDC4F7S23osDvDA==
Document Descriptionmanual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize2.93kB (36635 bits)
Date Submitted2011-06-06 00:00:00
Date Available2011-06-09 00:00:00
Creation Date2011-05-24 15:22:41
Producing SoftwareAcrobat Distiller 9.4.2 (Windows)
Document Lastmod2011-05-24 15:22:41
Document TitleBU-2_FCC_EAH46U500_110524.pmd
Document CreatorPageMaker 7.0J
Document Author: ysuzuki

Bluetooth® Adapter Unit “BU-2”
The “BU-2” is a Bluetooth® Adapter Unit for Vertex Standard Transceivers*. When the
Bluetooth® headset “BH-1/A”, “BH-2/A” is used with the “BU-2” Adapter, you can enjoy comfortable hands free operation.
*: Please refer to the Vertex Standard catalog for the correct “BU-2” Adapter for the radio you are using.
This Bluetooth® radio module has to be installed and used in accordance with the technical description/installation instructions provided by the manufacture.
This Bluetooth® radio module is intended to be placed on the market in all States, where the Bluetooth®
technology and the used frequency band is released.
For detail information concerning type approval of this module (e.g. where this module is already
pre-approved) please contact the manufacturer.
The system may only be implemented in the configuration that was authorized.
Note that any changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Part 15.21: Changes or modifications to this device not expressly approved by Vertex Standard
could void the user’s authorization to operate this device.
CAUTION: This device and its antenna(s) must not be co-located or operated in conjunction with
any other antenna or transmitter. End users cannot modify this transmitter device. Any unauthorized modification could void the user’s authority to operate this device.
To comply with FCC RF exposure compliance requirements, a separation distance of at least 20
cm must be maintained between the antenna of this device and all persons.
The term “IC” before the radio certification number only signifies that Industry Canada technical
specifications were met.
This device complies with RSS 210 of industry Canada “IC”.
“Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.”
L’ utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas
produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement
du dispositif.
“The installer of this radio equipment must ensure that the antenna is located or pointed such
that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.ca/rpb”
Labeling: When the module is installed into the system, the following information shall be placed
on the outside of final host system.
Contains FCC ID: K660H464X10
IC : 511B-0H464X10

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : ysuzuki
Create Date                     : 2011:05:24 15:22:41+09:00
Modify Date                     : 2011:05:24 15:22:41+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PageMaker 7.0J
Producer                        : Acrobat Distiller 9.4.2 (Windows)
Format                          : application/pdf
Title                           : BU-2_FCC_EAH46U500_110524.pmd
Creator                         : ysuzuki
Document ID                     : uuid:050ec1e6-ff72-4fbf-a222-49e96a6b2969
Instance ID                     : uuid:2ac178a3-049b-40e2-a9ed-9b8b75e30084
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: K660H464X10

Navigation menu