Yaesu Musen 10503220 VHF FM Handheld Transceiver User Manual Revised Operating Manual page 1
Yaesu Musen Co., Ltd. VHF FM Handheld Transceiver Revised Operating Manual page 1
Contents
- 1. Operating Manual
- 2. Safety Training and License Information
- 3. Revised Operating Manual page 1
- 4. Revised Operating Manual
- 5. Manual
Revised Operating Manual page 1
FCC ID: K6610503220/IC ID: 511B-10503220 VX410/420 Series Operating Manual VX-410/420 Series Operating Manual Important Notice! FCC RF Exposure Compliance Requirements for Occupational Use Only: This Radio has been tested and complies with the Federal Communications Commission (FCC) RF exposure limits for Occupational Use/Controlled exposure environment. In addition, it complies with the following Standards and Guidelines: FCC 96-326, Guidelines for Evaluating the Environmental Effects of Radio-Frequency Radiation. FCC OET Bulletin 65 Edition 97-01 (1997) Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3kHz to 300 GHz. ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields-RF and Microwave. This radio is NOT approved for use by the general population in an uncontrolled environment. This radio is restricted to occupational use, work related operations only where the radio operator must have the knowledge to control its RF exposure conditions. When transmitting, hold the radio in a vertical position with its microphone 1 to 2 inches (2.5 to 5 cm) away from your mouth and keep the antenna at least 1 inch (2.5cm) away from your head and body. The radio must be used with a maximum operating duty cycle not exceeding 50 %, in typical Push-to-Talk (PTT) configurations. DO NOT transmit for more than 50 % of total radio use time (50 % duty cycle). Transmitting more than 50 % of the time can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the red LED on the top of the radio is illuminated. You can cause the radio to transmit by pressing the PTT button. DO NOT transmit when the radio is used in Body Worn configuration with the following accessory: belt-clip (Parts # CP7064001). It must be used ONLY for (1) there is a 4 cm distance from the body during transmitting, (2) monitoring purposes, using the speaker only and (3) for carrying purposes. Always use Vertex Standard authorized accessories. 1/9 Vertex Standard Co., Ltd.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2003:09:25 12:06:46Z Modify Date : 2004:01:22 15:26:38+09:00 Page Count : 1 Creation Date : 2003:09:25 12:06:46Z Mod Date : 2004:01:22 15:26:38+09:00 Producer : Acrobat Distiller 5.0.5 (Windows) Metadata Date : 2004:01:22 15:26:38+09:00 Has XFA : NoEXIF Metadata provided by EXIF.tools