Yaesu Musen 10854620 HANDHELD UHF TRANSCEIVER User Manual VX 230 pmd
Yaesu Musen Co., Ltd. HANDHELD UHF TRANSCEIVER VX 230 pmd
Contents
- 1. Operating Manual 1
- 2. Operating Manual 2
Operating Manual 2
KEY FUNCTIONS The VX-230 provide [Side 1] and [Side 2] keys. These Programmable keys functions can be customized (set to other functions), via programming by your VERTEX STANDARD dealer, to meet your communications/network requirements. Some features may require the purchase and installation of optional internal accessories. The possible Programmable key features are illustrated below, and their functions are explained in the next chapter. For further details, contact your VERTEX STANDARD dealer. For future reference, check the box next to each function that has been assigned to the Programmable key on your particular radio, and keep it handy. FUNCTION None Mon (Monitor) SQL Off SQL Set Low Power Scan Follw-Me Scan Scan Set DW (Dual Watch) TA Scan TA (Talk Around) TX Save Disable Reset Call Speed Dial Lock Emergency Lone Worker PROGRAMMABLE KEY (PRESS / PRESS AND HOLD) [Side 1] [Side 2] --/--- /--- /--- /-- ACCESSORIES & OPTIONS FNB-V103LI FNB-V104LI VAC-300 VAC-6300 PA-42 MH-37A4B MH-45B4B MH-360S MH-450S VC-25 VCM-2 DCM-1 ATV-8A ATV-8B ATV-8C ATV-6XL ATU-6A ATU-6B ATU-6C ATU-6D ATU-6F CLIP-18 LCC-230 CE99 FIF-10A CT-27 CT-42A CT-106 7.4 V 1150 mAh Lithium-Ion Battery 7.4 V 2000 mAh Lithium-Ion Battery Desktop Rapid Charger 6-unit Multi Charger AC Adapter (for VAC-300) Earpiece/Microphone Speaker/Microphone Speaker/Microphone Speaker/Microphone VOX Headset Vehicle Charger Mount Adapter (for VAC-300) Desktop Charger Bracket (for VAC-300) Rubber Antenna 134-151 MHz Rubber Antenna 150-163 MHz Rubber Antenna 161-174 MHz Rubber Antenna 134-174 MHz (Untuned) Rubber Antenna 400-430 MHz Rubber Antenna 420-450 MHz Rubber Antenna 440-470 MHz Rubber Antenna 450-485 MHz Rubber Antenna 485-520 MHz Belt Clip Leather Case Programming Software USB Programming Interface Radio to Radio Programming Cable PC Programming Cable PC Programming Cable (for FIF-10A) FCC ID:K6610854620 IC: 511B-10854620 DESCRIPTION OF OPERATING FUNCTIONS Mon (Monitor) Scan Set Reset Press (or Press and hold) the assigned Programmable key momentarily to disable the Tone squelch. When disables the Tone squelch, the LED indicator on the top of the radio will glow green. Press (or press and hold) the assigned Programmable key to delete the Current Memory Channel from the Scanning List. When you delete a channel from the Scanning List, a low tone beep will sound. To restore a particular channel to your Scanning List, press (or press and hold) the assigned Programmable key again; a high tone beep will sound. Press (or Press and hold) the assigned Programmable key to silence the receiver and reset for another call, when a communication is finished. SQL Off Press (or Press and hold) the assigned Programmable key to disable the Noise and Tone squelch. Again press (or Press and hold) the assigned Programmable key to resume normal (quiet) Noise and Tone squelch action. SQL Set You can manually adjust the squelch level using this function. Press the assigned Programmable key to toggle the squelch threshold level “High” and “Low”. Low Power Press (or Press and hold) the assigned Programmable key to set the radio’s transmitter to the “Low Power” mode, thus extending battery life. Press (or Press and hold) the assigned Programmable key again to return to “High Power” operation when in difficult terrain. When the radio’s transmitter is set to “Low Power” mode, the LED indicator on the top of the radio will glow green. Scan The Scanning feature is used to monitor multiple channels programmed into the transceiver. While scanning, the radio will check each channel for the presence of a signal, and will stop on a channel if a signal is present. To activate scanning: Press (or Press and hold) the assigned Programmable key. The scanner will search the channels, looking for active ones; it will pause each time it finds a channel on which someone is speaking. When the scanner is activated, the LED indicator on the top of the radio will glow green. To stop scanning: Press (or Press and hold) the assigned Programmable key. Operation will revert to the channel to which the CH knob is set. Follow-Me Scan “Follow-Me” Scan feature checks a User-assigned Priority Channel regularly as you scan the other channels. Thus, if only Channels 1, 3, and 5 (of the 8 available channels) are designated for “Scanning,” the user may nonetheless any channel as the “Userassigned” Priority Channel via the “Follow-Me” feature. Press the assigned Programmable key to activate “Follow-Me” scanning, then turn the CH selector knob to the channel which you want to designate as the “User-Assigned Priority Channel”. When the scanner stops on an “active” channel, the User-assigned Priority Channel will automatically be checked every few seconds (interval programmed by your Dealer). DW (Dual Watch) The Dual Watch feature is similar to the Scan feature, except that only two channels are monitored: the current operating channel, and the “Priority” channel. To activate Dual Watch: Press (or Press and hold) the assigned Programmable key. The scanner will search the two channels; it will pause each time it finds a channel on which someone is speaking. When the Dual Watch feature is activated, the LED indicator on the top of the radio will glow green. To stop Dual Watch: Press (or Press and hold) the assigned Programmable key. Operation will revert to the channel to which the CH knob is set. TA Scan Press the assigned programmable key to toggle the TA (Talk Around) scan feature “On” and “Off.” While TA scan is proceeding, the VX-230 will search both the transmit and receive frequencies (and the LED indicator on the top of the radio will glow green). When a signal is encountered on the receive frequency, the VX-230 will pause until the signal disappears. When a signal is encountered on the transmit frequency, the VX-230 will check for activity on the receive frequency every few seconds (interval programmed by your Dealer). TA (Talk Around) Press (or Press and hold) the assigned Programmable key to activate the Talk Around feature when you are operating on duplex channel systems (separate receive and transmit frequencies, utilizing a “repeater” station). The Talk Around feature allows you to bypass the repeater station and talk directly to a station that is nearby. This feature has no effect when you are operating on “Simplex” channels, where the receive and transmit frequencies are already the same. When the “TA” function is activated, the LED indicator on the top of the radio will glow green. TX Save Disable Call Press (or Press and hold) the assigned Programmable key to send a programmed 2-Tone sequential tone. Speed Dial Your Dealer may have a pre-programmed Auto-Dial telephone number memory into your radio. Press (or Press and hold) the assigned Programmable key to send the pre-programmed Auto-Dial telephone number. The DTMF tones sent during the dialing sequence will be heard in the speaker. Lock Press (or Press and hold) the assigned Programmable key to lock the CH knob, Programmable keys, and PTT switch. The precise lockout configuration is programmed by your VERTEX STANDARD dealer. Emergency The VX-230 series includes an “Emergency” feature, which may be useful, if you have someone monitoring on the same frequency as your transceiver’s channel. For further details contact your VERTEX STANDARD dealer. Lone Worker Press and hold the assigned Programmable key to toggle the Lone Worker feature “ON” and “OFF.” The Lone Worker feature will emit an audible alarm for 30 seconds at one second intervals when the Lone Worker Timer has expired. If the user does not reset the timer by pressing the PTT switch, the radio switches to the Emergency mode. ARTS (AUTO RANGE TRANSPOND SYSTEM) This system is designed to inform you when you and another ARTS-equipped station are within communication range. During ARTS operation, your radio automatically transmits for about 1 second every 55 seconds in an attempt to shake hands with the other station. If you are out of range for more than two minutes, your radio senses that no signal has been received, a ringing beeper will sound. If you subsequently move back into range, as soon as the other station transmits, your beeper will sound. Press (or Press and hold) the assigned Programmable key to disable the Transmit Battery Saver, if you are operating in a location where high power is almost always needed. The Transmit Battery Saver helps extend battery life by reducing transmit power when a very strong signal from an apparently nearby station is being received. Under some circumstances, though, your hand-held radio may not be heard well at the other end of the communication path, and high power may be necessary at all times. Vertex Standard Co.,Ltd.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Modify Date : 2009:01:19 09:25:02+09:00 Create Date : 2008:07:23 17:52:46+09:00 Metadata Date : 2009:01:19 09:25:02+09:00 Creator Tool : PageMaker 7.0J Format : application/pdf Title : VX-230.pmd Creator : yohtaki Document ID : uuid:288c602d-d648-4baa-9b49-9d60e7d10e16 Instance ID : uuid:fa0a154f-4b3e-47ba-815c-6f3e5224078f Producer : Acrobat Distiller 7.0.5 (Windows) Has XFA : No Page Count : 1 Author : yohtakiEXIF Metadata provided by EXIF.tools