Yaesu Musen 20581X50 HF/50 MHz Transceiver User Manual FTDX1200 Operating Manual
Yaesu Musen Co., Ltd. HF/50 MHz Transceiver FTDX1200 Operating Manual
Contents
Users Manual 3
Page 34 FT DX 1200 OPERATING MANUAL
though the actual tone that you hear is not chang-
ing.
:KHQRSHUDWLQJRQWKH)0PRGHURWDWHWKH[RF/
SQL]6TXHOFKNQREFORFNZLVHWRWKHSRLQW
where the background noise is just silenced. This
is the point of maximum sensitivity to weak sig-
QDOV([FHVVLYHDGYDQFHPHQWRIWKH[RF/SQL]
knob will decrease the ability of the receiver to
detect weak signals.
You may switch the [RF/SQL]NQREIURPWKH5)
*DLQ)XQFWLRQWRWKH6TXHOFK)XQFWLRQYLD0HQX
item ³037 RFSQL VR´.
5RWDWHWKH0DLQ7XQLQJ'LDONQREWRWXQHDURXQGWKH
EDQGDQGEHJLQQRUPDORSHUDWLRQ
ADVICE:
&ORFNZLVHURWDWLRQRIWKH0DLQ7XQLQJ'LDONQRE
LQFUHDVHVWKHRSHUDWLQJIUHTXHQF\RQH³VWHS´
RIWKH V\QWKHVL]HUDWD WLPHVLPLODUO\FRXQWHU
FORFNZLVHURWDWLRQRIWKH0DLQ7XQLQJ'LDONQRE
ZLOOGHFUHDVHWKHIUHTXHQF\7ZR VHWWLQJVRQH
³QRUPDO´ DQG RQH ³IDVW´ DUH DYDLODEOH IRU HDFK
RSHUDWLQJPRGH3UHVVLQJWKH[FAST] button
HQJDJHVWKH³)DVW´WXQLQJVHOHFWLRQVHHFKDUWEH-
low).
BASIC OPERATION: RECEIVING ON AMATEUR BANDS
7KHWXQLQJVWHSVIRU WKH0DLQ7XQLQJ'LDONQRE
DUHVHWDWWKHIDFWRU\WR+]66%&:577<
'$7$DQG+]$0)0SHUVWHS9LD
0HQXLWHPV³150 CW DIAL STEP´ WR ³154 SSB
DIAL STEP´KRZHYHU\RXPD\FKDQJHWKHVHVHW-
WLQJVIURP+]WRRU+]66%&:577<
'$7$DQG+]WR+]$0)0LQVWHDG
MAIN TUNING DIAL KNOB TUNING RATE
OPERATING
MODE
1 STEP 1 DIAL ROTATION
LSB/USB/CW/
RTTY/DATA
1 / 5 / 10 Hz
(100 Hz)
1 / 5 / 10 kHz
(100 kHz)
AM/FM
100 Hz (1 kHz)
100 kHz (1 MHz)
Numbers in parentheses indicate steps when the [FAST] button is On.
,I \RX ZDQWWRHIIHFWUDSLGIUHTXHQF\FKDQJH
WKHUHDUHVHYHUDOWHFKQLTXHVDYDLODEOH
y 'LUHFWNH\ERDUGHQWU\RIWKHIUHTXHQF\
y Use the
[CLAR/VFO-B] knob to tune in 1
0+]VWHSV
y Use the microphone’s
[UP][DWN] scanning
NH\VLI\RXUPLFURSKRQHLVVRHTXLSSHG
FCC ID: K6620581X50 / IC: 511B-20581X50
YAESU MUSEN CO., LTD.
Page 35FT DX 1200 OPERATING MANUAL
OPERATION ON 60-METER (5 MHZ) BAND (U.S. AND U.K. VERSION ONLY)
7KHUHFHQWO\UHOHDVHGPHWHUEDQGLVFRYHUHGLQWKHFTDX1200E\¿[HGPHPRU\FKDQQHOV7KHVHFKDQQHOVDUHVHWWR
86%RU&:DQGWKH\DSSHDUEHWZHHQWKH³ODVW´306FKDQQHO³P9U´DQGWKH¿UVW³UHJXODU´PHPRU\FKDQQHO&KDQQHO
3UHVVWKH[V/M]EXWWRQRQFHWRHQWHUWKH³0HPRU\´
PRGHWKH³MCH´LFRQZLOODSSHDULQWKHGLVSOD\
and a memory channel number will appear on the
display.
ADVICE:
,I\RXFDQQRWHQWHUWKH³0HPRU\´PRGHWKHWUDQV-
ceiver may be in >VFO-B)RX] VR FKHFN WR VHH LI
the green indicator is illuminated in the display. If
VR SUHVV WKH [A
X
W
B] Switch to return operation to
9)2$1RZSUHVV WKH [V/M] button to enter the
³0HPRU\´PRGH
3UHVVWKH[MCH] button located on the bottom right
of the [VFO-B/CLAR]NQRE7KH/('LPEHGGHGLQ
the button will glow orange to signify that rotation of
the [VFO-B/CLAR] knob will allow selection of the
memory channel.
0HPRU\ FKDQQHOV ³5M-01´ WKURXJK ³5M-10´ DUH
SUHSURJUDPPHG DW WKH IDFWRU\ ZLWK WKH SHUPLWWHG
IUHTXHQFLHVLQWKH0+]EDQGDQGWKH86%RU&:
mode is automatically selected on these channels.
4. To exit from 60-meter operation and return to the
9)2PRGHMXVWSUHVVWKH[V/M] button.
NOTE:
7KHIUHTXHQFLHV DQGRSHUDWLQJ PRGHIRU0+]EDQG
RSHUDWLRQDUH¿[HGDQGPD\QRWEHFKDQJHG
BASIC OPERATION: RECEIVING ON AMATEUR BANDS
[VFO-B/CLAR] Knob
[MCH] Button
[V/M] Button
Main Tuning Dial Knob
CHANNEL
NUMBER
5M-01
5M-02
5M-03
5M-04
5M-05
5M-06
5M-07
5M-08
5M-09
5M-10
U.S. VERSION
5.332000 MHz
5.348000 MHz
5.358500 MHz
5.373000 MHz
5.405000 MHz
5.332000 MHz
5.348000 MHz
5.358500 MHz
5.373000 MHz
5.405000 MHz
U.K. VERSION
5.260000 MHz
5.280000 MHz
5.290000 MHz
5.368000 MHz
5.373000 MHz
5.400000 MHz
5.405000 MHz
-
-
-
FREQUENCY
FCC ID: K6620581X50 / IC: 511B-20581X50
YAESU MUSEN CO., LTD.
Page 36 FT DX 1200 OPERATING MANUAL
BASIC OPERATION: RECEIVING ON AMATEUR BANDS
CLAR (CLARIFIER) OPERATION
The [RX CLAR][TX CLAR][CLEAR] buttons and [VFO-B/CLAR]NQREDUHXVHGWRRIIVHWWKHUHFHLYHIUHTXHQF\
WKHWUDQVPLWIUHTXHQF\RUERWKIURPWKHLUVHWWLQJVRQWKH9)2$IUHTXHQF\)RXUVPDOOQXPEHUVRQWKH0XOWL'LVSOD\
:LQGRZVKRZWKHFXUUHQW&ODUL¿HURIIVHW7KH&ODUL¿HUFRQWUROVRQWKHFTDX1200 are designed to allow you to preset
DQRIIVHWXS WR N+]ZLWKRXW DFWXDOO\UHWXQLQJ DQGWKHQ WRDFWLYDWH LWYLD WKH&ODUL¿HU [RX CLAR] and [TX
CLAR]EXWWRQV7KLVIHDWXUHLVLGHDOIRUIROORZLQJDGULIWLQJVWDWLRQRUIRUVHWWLQJWKH VPDOOIUHTXHQF\RIIVHWVVRPH-
WLPHVXWLOL]HGLQ';³6SOLW´ZRUN
+HUHLVWKHWHFKQLTXHIRUXWLOL]LQJWKH&ODUL¿HU
3UHVV WKH [RX CLAR]EXWWRQ7KH³RX´ QRWDWLRQ
ZLOODSSHDULQ WKH0XOWL'LVSOD\:LQGRZDQG WKH
programmed offset will be applied to the receive fre-
TXHQF\
5RWDWLRQRIWKH[VFO-B/CLAR] knob will allow
\RXWRPRGLI\\RXULQLWLDORIIVHWRQWKHÀ\2IIVHWVRI
XSWRN+]PD\EHVHWXVLQJWKH&ODUL¿HU
7RFDQFHO&ODUL¿HURSHUDWLRQSUHVVWKH[RX CLAR] but-
WRQ7KH³RX´QRWDWLRQZLOOGLVDSSHDUIURPWKHGLVSOD\
ADVICE:
7XUQLQJWKH&ODUL¿HURIIPHUHO\FDQFHOVWKHDSSOLFD-
WLRQRIWKHSURJUDPPHGRIIVHWIURPWKHUHFHLYHDQG
RUWKHWUDQVPLWIUHTXHQFLHV7RFOHDUWKH&ODULILHU
RIIVHWDQGUHVHWLWWR³]HUR´SUHVVWKH[CLEAR] but-
ton. The programmed offset is displayed in the small
PXOWLFKDQQHOZLQGRZRIWKHIUHTXHQF\GLVSOD\
<RXPD\DOVRDFWLYDWHWKHFODUL¿HURQWKH9)2%IUH-
TXHQF\,QWKLVFDVHWKHRIIVHWIUHTXHQF\LVVHWXVLQJ
WKH0DLQ7XQLQJ'LDONQRELQVWHDGRIWKH[VFO-B/
CLAR] knob.
7KH&ODUL¿HURSHUDWLRQLQFOXGLQJWKHRIIVHWIUHTXHQ-
F\ZLOOEH PHPRUL]HG LQGHSHQGHQWO\ RQ HDFK9)2
VWDFNRI9)2$DQG9)2%
[VFO-B/CLAR] Knob
[RX CLAR] Button
[TX CLAR] Button
[CLEAR] Button
TXCLAR
$OWHUQDWHO\ \RXPD\DSSO\WKH&ODULILHURIIVHW
WR WKH WUDQVPLW IUHTXHQF\ ZLWKRXW FKDQJLQJ WKH
UHFHLYHIUHTXHQF\W\SLFDOO\IRU³VSOLW´';SLOH
ups).
[VFO-B/CLAR] Knob
[S/T] Button
7KH7XQLQJ2IIVHW,QGLFDWRUSURYLGHVDJUDSKLFDOUHSUHVHQWDWLRQRIWKH&ODUL¿HURIIVHW
,Q &: PRGH WKH IDFWRU\ GHIDXOW VHWWLQJ RI WKH7XQLQJ 2IIVHW ,QGLFDWRU VKRZV WKH
&:&HQWHU7XQLQJLQVWHDGRI&ODUL¿HU2IIVHW,I\RXZLVKWRFKDQJHWKLVVRWKDWWKH
&ODUL¿HU2IIVHWLVDOVRGLVSOD\HGRQ&:XVHWKHIROORZLQJSURFHGXUH
[SELECT] button
3UHVVWKH[MENU]EXWWRQWRHQWHUWKH0HQX
mode.
5RWDWH WKH[VFO-B/CLAR] NQRERUSUHVVWKH
STEXWWRQWRVHOHFW0HQXLWHP³010 BAR DIS-
PLAY SELECT´
3UHVV WKH [SELECT]EXWWRQWKHQURWDWHWKH
[VFO-B/CLAR]NQRERUSUHVVWKHST button)
WRVHOHFW³CLAR&ODUL¿HU´UHSODFLQJWKHGHIDXOW
³CW TUNE&:781,1*´VHOHFWLRQ
3UHVV WKH [SELECT]EXWWRQWKHQSUHVVWKH
[MENU] button to save the new setting and exit
to normal operation.
Multi-Display Window
[MENU] button
[Plus (+) Offset]
[Zero Offset]
[Minus (–) Offset]
FCC ID: K6620581X50 / IC: 511B-20581X50
YAESU MUSEN CO., LTD.
Page 37FT DX 1200 OPERATING MANUAL
BASIC OPERATION: RECEIVING ON AMATEUR BANDS
LOCK
<RXPD\ORFNWKHVHWWLQJRIWKH0DLQ7XQLQJ'LDONQREIRU9)2$IUHTXHQF\WXQLQJDQGWKH[VFO-B/CLAR]NQREIRU
9)2%IUHTXHQF\WXQLQJWRSUHYHQWDFFLGHQWDOIUHTXHQF\FKDQJH
Main Tuning Dial Knob Lock
7RORFNWKH0DLQ7XQLQJ'LDONQRESUHVVWKH[LOCK]
EXWWRQWKDW LVORFDWHG WRWKHULJKWRIWKH 0DLQ7XQLQJ
'LDO NQRE 7R XQORFN WKH 'LDO VHWWLQJ DQG UHVWRUH QRU-
PDOWXQLQJSUHVVWKH[LOCK] button once more.
[VFO-B/CLAR] Knob Lock
To lock the [VFO-B/CLAR] NQRE SUHVV WKH [CLEAR
(LOCK)] button that is located to the top of the [VFO-
B/CLAR] knob. To unlock the [VFO-B/CLAR] NQRE
DQGUHVWRUHQRUPDOWXQLQJSUHVVWKH[CLEAR (LOCK)]
button once more.
ADVICE:
7KH ORFN IHDWXUH ZLOO EH PHPRUL]HG LQGHSHQGHQWO\ RQ
WKH0DLQ7XQLQJ'LDONQREDQGWKH[VFO-B/CLAR]
knob.
DIMMER
7KHLOOXPLQDWLRQOHYHORIWKH9)2$)UHTXHQF\GLVSOD\7)7GLVSOD\DQGVL[NH\VOHIWRIWKH7)7GLVSOD\PD\EHDG-
MXVWHGYLD0HQXLWHPVDQG
To adjust the illumination levHO
3UHVVWKH[MENU]EXWWRQWRHQWHUWKH0HQXPRGH
5RWDWH WKH [VFO-B/CLAR] NQRE RU SUHVV WKH S
TEXWWRQWR VHOHFW0HQXLWHP ³008 DIMMER LED´
/(''LVSOD\RU³009 DIMMER TFT´ 7)7 'LV-
play).
3UHVVWKH[SELECT] button then rotate the [VFO-B/
CLAR]NQRERUSUHVVWKHST button) to select the
desired illumination level.
3UHVVWKH[SELECT]EXWWRQWKHQSUHVVWKH[MENU]
button to save the new setting and exit to normal op-
eration.
[CLEAR(LOCK)] Button
[LOCK] Button
[VFO-B/CLAR] Knob
[S/T] Button
[SELECT] button
[MENU] button
FCC ID: K6620581X50 / IC: 511B-20581X50
YAESU MUSEN CO., LTD.
Page 38 FT DX 1200 OPERATING MANUAL
CONVENIENCE FEATURES
BAND STACK OPERATION
The FTDX1200XWLOL]HVDWULSOHEDQGVWDFN9)2VHOHFWLRQWHFKQLTXHWKDWSHUPLWV\RXWRVWRUHXSWRWKUHHIDYRULWHIUH-
TXHQFLHVDQGPRGHVRQWRHDFKEDQG¶V9)2UHJLVWHU)RUH[DPSOH\RXPD\VWRUHRQHIUHTXHQF\HDFKRQ0+]&:
577<DQG86%WKHQUHFDOOWKHVH9)2VE\VXFFHVVLYHPRPHQWDU\SUHVVHVRIWKH[14]0+]EDQGEXWWRQ(DFK$PDWHXU
EDQGNH\PD\VLPLODUO\KDYHXSWRWKUHHIUHTXHQF\PRGHVHWWLQJVDSSOLHG%RWKWKH9)2$DQG9)2%V\VWHPVKDYH
WKHLURZQLQGHSHQGHQWEDQGVWDFNV
$W\SLFDOVHWXSIRUWKH0+]EDQGPLJKWEHDUUDQJHGOLNHWKLV
3URJUDP0+]&:0RGHWKHQSUHVVWKH[14]
0+]EDQGEXWWRQ
3URJUDP 0+] 577< 0RGH WKHQ SUHVV WKH
[14]0+]EDQGEXWWRQ
3URJUDP0+]66%0RGHWKHQSUHVVWKH[14]
0+]EDQGEXWWRQ
:LWK WKLV FRQ¿JXUDWLRQ VXFFHVVLYH PRPHQWDU\ SUHVVHV
of the [14]0+]EDQGEXWWRQZLOODOORZ\RXWRVWHSVH-
TXHQWLDOO\WKURXJKWKHVHWKUHH9)2V
C.S (CUSTOM SWITCH)
The front panel [C.S]EXWWRQPD\EHSURJUDPPHGWRGLUHFWO\DFFHVVDQRIWHQXVHG0HQX0RGHVHOHFWLRQ
[BAND] Keys
C.S Setup
3UHVVWKH[MENU]EXWWRQWRHQJDJHWKH0HQXPRGH
WKH0HQXOLVWZLOODSSHDURQWKHGLVSOD\
5RWDWHWKH[VFO-B/CLAR]NQRERUSUHVVWKHST
EXWWRQWRVHOHFW WKH 0HQXLWHP\RX ZDQW WR DFFHVV
with the front panel [C.S] button.
3UHVVWKH[C.S] button to lock in your selection.
3UHVVWKH[MENU]EXWWRQWRVDYHWKHQHZFRQ¿JXUD-
tion and exit to normal operation.
Menu Selection Recall via [C.S] button
3UHVVWKH[C.S] button.
7KHSURJUDPPHG0HQXLWHPZLOODSSHDURQWKHGLVSOD\
3UHVVWKH[MENU] button exit to normal operation.
[C.S] Button [VFO-B/CLAR] Knob
[S/T] Button
[SELECT] button
[MENU] button
FCC ID: K6620581X50 / IC: 511B-20581X50
YAESU MUSEN CO., LTD.
Page 39FT DX 1200 OPERATING MANUAL
CONVENIENCE FEATURES
SCOPE
This function displays a convenient spectrum scope for monitoring the band conditions in real time. Both strong and
weak signals can be displayed in an easy-to-understand manner on the TFT screen. This multifunctional scope takes into
FRQVLGHUDWLRQWKHRSHUDWRU¶VSUHIHUHQFHE\VZLWFKLQJEHWZHHQWKHFRQYHQLHQW&(17(5PRGHZKHUHWKH9)2IUHTXHQF\
LV FRQVWDQWO\ LQ WKH FHQWHU RI WKH VFUHHQ IRU PRQLWRULQJ FRQGLWLRQV RQ ERWK VLGHV RI \RXU RSHUDWLQJ IUHTXHQF\ DQG
WKH),;PRGHZKHUHWKHIUHTXHQF\LV¿[HGWRWKHOHIWVLGHRIWKHVFUHHQIRUFRQYHQLHQFHLQPRQLWRULQJLQWKHEDQG
1RWHWKDWWKHUHFHLYHGVRXQGLVQRWRXWSXWGXULQJWKHVFRSHRSHUDWLRQ
3UHVV WKH [SCOPE] button momentarily to display
the scope screen.
ADVICE:
See the instructions on the right side of this page
for details on individual operating modes.
6HH ³6ZLWFKLQJ %HWZHHQ &(17(5),; 0RGHV´
below for details on changing operating modes.
6HOHFWDQ RSHUDWLQJPRGHIRU WKHVFRSHIXQFWLRQ
HLWKHU&(17(5RU),;PRGH.
ADVICE:
6ZHHSVSHHGFDQEHFKDQJHGLQ³124 SCOPE SPEED´
menu mode.
3UHVVWKH[SCOPE] button momentarily again to
GLVSOD\WKH$)))7VFUHHQRQWKHVFRSHVFUHHQZKHQ
the optional FFT unit is installed.
ADVICE:
The received sound spectrum is displayed on
WKH$)))7 VFUHHQ 3UHVV WKH [MONI] button to
display the received station’s transmission signal
spectrum.
2QWKH$)))7VFUHHQHLWKHUWKH³6SHFWUXP'LV-
SOD\´RUWKH³:DWHUIDOO'LVSOD\´FDQEHVHOHFWHG
LQWKH³184 FFT DISPLAY MODE´PHQXPRGH
3UHVV WKH [SCOPE] button again momentarily
to return to the previous scope operating screen
function.
CENTER mode
6ZLWFKRSHUDWLRQPRGHWR³&(17(5PRGH´
6HH³6ZLWFKLQJ%HWZHHQ&(17(5),;0RGHV´
below.
3UHVV WKH [SCOPE] button momentarily to display
the scope screen.
y 7KHFXUUHQWIUHTXHQF\LVGLVSOD\HGLQWKHFHQWHU
y :LGWKRIVFRSHGLVSOD\FDQEHVHWLQ³127 CENTER
SPAN FREQ´PHQXPRGH
Switching Between CENTER/FIX Modes
[SELECT] button
[MENU] button
3UHVVWKH[MENU]EXWWRQWRHQWHUWKH0HQX
mode.
5RWDWH WKH[VFO-B/CLAR] NQRERU SUHVVWKH
ST EXWWRQ WR VHOHFW 0HQX LWHP ³123 SCOPE
MODE´
3UHVV WKH [SELECT]EXWWRQWKHQURWDWHWKH
[VFO-B/CLAR]NQRERUSUHVV WKHST but-
WRQWR VHOHFWWKH³&(17(5´ RU³),;´)DFWRU\
GHIDXOWLV³&(17(5´
3UHVV WKH [SELECT]EXWWRQWKHQSUHVVWKH
[MENU] button to save the new setting and exit
to normal operation.
[VFO-B/CLAR] knob
[CLEAR] button
[S/T] button
FCC ID: K6620581X50 / IC: 511B-20581X50
YAESU MUSEN CO., LTD.
Page 40 FT DX 1200 OPERATING MANUAL
CONVENIENCE FEATURES
SCOPE
FIX mode
6ZLWFKWKHRSHUDWLRQPRGHWR³),;PRGH´
6HH ³6ZLWFKLQJ %HWZHHQ &(17(5),; 0RGHV´ RQ
the previous page.
3UHVV WKH [SCOPE] button momentarily to display
the scope.
y 7KH IUHTXHQF\ VHW LQ 0HQX 0RGH LV GLVSOD\HG DW
the leftmost start point on the screen.
y :LGWKRIVFRSHGLVSOD\FDQEHVHWLQ0HQX0RGH
E\LQGLYLGXDOEDQG6HHEHORZ
Frequency Menu Mode
1.8MHz 130 FIX 1.8MHz SPAN
3.5MHz 132 FIX 3.5MHz SPAN
5MHz 134 FIX 5.0MHz SPAN
7MHz 136 FIX 7.0MHz SPAN
10MHz 138 FIX 10MHz SPAN
14MHz 140 FIX 14MHz SPAN
18MHz 142 FIX 18MHz SPAN
21MHz 144 FIX 21MHz SPAN
24MHz 146 FIX 24MHz SPAN
28MHz 148 FIX 28MHz SPAN
50MHz 150 FIX 50MHz SPAN
FCC ID: K6620581X50 / IC: 511B-20581X50
YAESU MUSEN CO., LTD.
Page 41FT DX 1200 OPERATING MANUAL
[S/T/W/X] Button
Memorizing the Scope Screen
The FTDX1200FDQPHPRUL]HWKHVFRSHVFUHHQLQXSWRFKDQQHOVDQGUHFDOOLWODWHU
[SELECT] button
[SCOPE] button
How to memorize
3UHVV DQG KROG WKH [SELECT] button for one sec-
RQGWRPHPRUL]HWKHFXUUHQWVFRSHVFUHHQ8SWR
FKDQQHOVPD\EHPHPRUL]HG2QFHDOOPHPRULHV
KDYHGDWDLQWKHPSUHYLRXVGDWDVWDUWLQJZLWKFKDQ-
QHO ³´ ZLOO EH RYHUZULWWHQ RQ D ¿UVWLQ ¿UVWRXW
basis.
Recalling memorized screens
3UHVVWKH[SCOPE] button several times until the
³6FRSH0HPRU\´VFUHHQDSSHDUV
The last stored scope screen memory will be dis-
played.
3UHVVWKH[SCOPE] button to display the screens
in the following orGHU
[MENU] screen Æ [SCOPE] screen Æ
Æ [SCOPE+AF-FFT] screen* Æ
Æ [SCOPE MEMORY] screen Æ
:KHQWKHRSWLRQDO))7XQLWLVLQVWDOOHG
3UHVVWKH[S][T][W][X] buttons to recall the
PHPRUL]HGVFUHHQ\RXZLVK
[S][X@EXWWRQ 5HFDOOVWKHPHPRU\WRZDUGV
the new memory.
1 Æ 2 Æ 3 Æ 4 ...... 9 Æ 10 Æ 1 Æ 2 ...
[W][T@EXWWRQ5HFDOOVWKHPHPRU\WRZDUGV
the old memory.
10 Æ 9 Æ 8 Æ 7 ...... 2 Æ 1 Æ 10 Æ 9 ...
7RFORVHWKH VFRSHVFUHHQ SUHVVWKH[SCOPE]
button several times until the desired screen
appears.
Erasing the memorized screens
5HFDOOWKHVFRSHVFUHHQWKDW\RXZLVKWRHUDVHXV-
ing the [S][T][W][X] button.
3UHVVDQGKROGRQHRIWKH[S][T][W][X] but-
ton for one second to erase the scope screen.
7KHPHPRU\FKDQQHOLVGHOHWHGDQGWKHFKDQQHO
QXPEHUV IRU FKDQQHOV ZLWK KLJKHU QXPEHUV DUH
decremented.
CONVENIENCE FEATURES
SCOPE
FCC ID: K6620581X50 / IC: 511B-20581X50
YAESU MUSEN CO., LTD.
Page 42 FT DX 1200 OPERATING MANUAL
ROTATOR CONTROL FUNCTIONS
:KHQXVLQJD<$(68PRGHOG-800DXAG-1000DXAG-2800DXA$QWHQQD5RWDWRUQRWVXSSOLHGLWLVSRVVLEOHWR
control it from the front panel of the FTDX1200.
3UHVV DQG KROG LQ WKH [ENT]EXWWRQRQHRIWKH
[BAND]NH\VZLWFKHVIRURQHVHFRQG7KH9)2%
)UHTXHQF\'LVSOD\ DUHDZLOO FKDQJHWR WKH³5RWDWRU
&RQWURO´FRQ¿JXUDWLRQ
3UHVVHLWKHUWKH[3.52)] button or the [73)] button
WRURWDWHWKHDQWHQQD3UHVVLQJ WKH[3.52)] button
ZLOOFDXVHURWDWLRQWRWKHOHIWFRXQWHUFORFNZLVHE\
WZRGHJUHH VWHSVZKLOH SUHVVLQJWKH[73)] button
ZLOO FDXVH URWDWLRQ WR WKH ULJKW FORFNZLVH E\ WZR
degree steps.
3UHVVWKH[145)] button or the [186)] button to con-
WUROWKHVSHHGRIURWDWLRQ3UHVVLQJWKH[145)] button
ZLOOFDXVHVORZHUURWDWLRQZKLOHSUHVVLQJWKH[186)]
EXWWRQ ZLOO VSHHG XS URWDWLRQ 8VXDOO\ \RX ZLOO EH
XVLQJWKH³´VSHHGVHWWLQJ
:KHQ \RX DUH WKURXJK H[HUFLVLQJ URWDWRU FRQWURO SUHVV
the [ENT] EXWWRQ PRPHQWDULO\7KH 9)2% )UHTXHQF\
'LVSOD\ZLOOUHWXUQWRWKHPDLQGLVSOD\¿HOG
IMPORTANT NOTE
Set the starting point to match your rotator
FRQWUROLQGLFDWRUQHHGOHYLDWKH0HQXLWHP
³013 ROTATOR START UP´7KHGHIDXOWVHW-
WLQJLV]HURQRUWK,I\RXUFRQWUROOHUVWDUWLQJ
SRLQWLVVRXWKWKH0HQXLWHP³013 ROTATOR
START UP´ PXVWEHVHWWR³180´,IQRWVHW
properly the FTDX1200 display will not show
the correct direction.
When the rotator control indicator needle
does not indicate the precise antenna direc-
WLRQ FDOLEUDWH WKH LQGLFDWRU QHHGOH SUHFLVHO\
WRWKHDQWHQQDGLUHFWLRQYLDWKH0HQXLWHP
³014 ROTATOR OFFSET ADJ´
CONVENIENCE FEATURES
[3.5(2)], [7(3)] Button
[14(5)], [18(6)] Button
[ENT] Button
Counter-clockwise Rotation
Clockwise Rotation
Speed Up
Speed Down
5HPRYHWKHUXEEHUFDS¿UVW
and then connect the plug.
FCC ID: K6620581X50 / IC: 511B-20581X50
YAESU MUSEN CO., LTD.
Page 43FT DX 1200 OPERATING MANUAL
Using the [UP]/[DWN] buttons of the
supplied MH-31B8 Hand Microphone
The [UP][DWN] buttons on the supplied MH-31B8
+DQG 0LFURSKRQH PD\ DOVR EH XVHG WR PDQXDOO\ VFDQ
WKHIUHTXHQF\XSZDUGRUGRZQZDUG
The microphone’s [UP]
[DWN]EXWWRQVXWLOL]HWKH
WXQLQJVWHSVRIWKH0DLQ
7XQLQJ'LDONQRE
When the microphone
[FST]EXWWRQLVSUHVVHG
the tuning rate increases by
DIDFWRU RI WHQLQ D PDQQHU
similar to the transceiver
front panel [FST] button.
ADVICE:
You may independently set
the tuning steps of the [UP]
[DWN]EXWWRQVLQ WKH$0DQG )0 PRGHV7RVHW QHZ
WXQLQJ VWHSV XVH 0HQX LWHPV ³155 AM CH STEP´ DQG
³156 FM CH STEP´
Keyboard Frequency Entry
7KH 2SHUDWLQJ IUHTXHQF\ PD\ EH HQWHUHG GLUHFWO\ LQWR
WKHFXUUHQW9)2XVLQJWKHIURQWSDQHO[BAND] key but-
tons.
Example: Enter 14.250.00 MHz
3UHVV WKH [ENT] button to
EHJLQ WKHGLUHFWIUHTXHQF\
HQWU\SURFHVV1RZEHJLQ-
ning with the first digit of
WKHIUHTXHQF\ WKHOHIWPRVW
GLJLW ZH ZLOO HQWHU WKH UH-
TXLUHGGLJLWVRIWKHIUHTXHQF\
3UHVVLQRUGHUWKHGLJLWVRIWKHRSHUDWLQJIUHTXHQF\
using the [BAND]EXWWRQVWKHIUHTXHQF\HQWU\GLJLW
or decimal point is printed on the right side of the
EXWWRQV,QWKLVH[DPSOHHQWHU
[1.81)] Æ [104)] Æ [GEN.)] Æ [3.52)] Æ
[
145)] Æ [500)] Æ [500)] Æ [500)] Æ
[500)]
7KHGHFLPDOSRLQWDIWHUWKH³0+]´SRUWLRQRIWKH
IUHTXHQF\ PXVW EH HQWHUHG EXW QR GHFLPDO SRLQW LV
UHTXLUHGDIWHUWKH³N+]´SRUWLRQ
3UHVV WKH [ENT] button once more to complete the
RSHUDWLQJIUHTXHQF\HQWU\$ VKRUW³EHHS´ZLOOFRQ-
¿UPWKDWWKHHQWU\ZDVVXFFHVVIXODQGWKHQHZRSHU-
DWLQJIUHTXHQF\ZLOODSSHDURQWKHGLVSOD\
ADVICE:
,I\RXDWWHPSWWRHQWHUDIUHTXHQF\RXWVLGHWKHRSHU-
DWLQJUDQJHRIN+]a0+]WKHPLFURSURFHVVRU
ZLOOLJQRUHWKHDWWHPSWDQG\RXZLOOEHUHWXUQHGWR
WKHSUHYLRXVRSHUDWLQJIUHTXHQF\,IWKLVKDSSHQV
SOHDVHWU\DJDLQWDNLQJFDUHQRWWRUHSHDWWKHHUURULQ
WKHIUHTXHQF\HQWU\SURFHVV
Using the [VFO-B/CLAR] knob
You may change the current
9)2IUHTXHQF\LQ0+]
VWHSV 3UHVV WKH [MHz/μT]
button located at the bot-
tom and left of the [VFO-B/
CLAR] NQRE7KH 0+]
steps will be applied to the
FXUUHQW9)2IUHTXHQF\7KHLPEHGGHG/('LQWKH[MHz]
button will glow orange in the latter case.
:KHQWXQLQJLQ0+]VWHSVFORFNZLVHURWDWLRQRIWKH
[VFO-B/CLAR]NQREZLOOLQFUHDVHWKHIUHTXHQF\ZKLOH
FRXQWHUFORFNZLVHURWDWLRQZLOOGHFUHDVHWKHIUHTXHQF\
MORE FREQUENCY NAVIGATION TECHNIQUES
CONVENIENCE FEATURES
FCC ID: K6620581X50 / IC: 511B-20581X50
YAESU MUSEN CO., LTD.