Yaesu Musen 30393X20 HANDHELD VHF MARINE LAND MOBILE RADIO User Manual HX400 pmd
Yaesu Musen Co., Ltd. HANDHELD VHF MARINE LAND MOBILE RADIO HX400 pmd
Contents
- 1. Users Manual
- 2. User Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1390848 |
| Application ID | Xvjlo9zZFTAGssDWp6taYA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 119.31kB (1491410 bits) |
| Date Submitted | 2010-12-15 00:00:00 |
| Date Available | 2010-12-15 00:00:00 |
| Creation Date | 2010-11-11 12:52:44 |
| Producing Software | Acrobat Distiller 9.4.0 (Windows) |
| Document Lastmod | 2010-11-11 13:15:12 |
| Document Title | HX400.pmd |
| Document Creator | PageMaker 7.0J |
| Document Author: | yohtaki |
FCC ID:K6630393X20 / IC: 511B-30393X20 HX400 VHF FM Marine Transceiver Owner’s Manual HX400 Page 1 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 TABLE OF CONTENTS Quick Reference Guide ............................................................................................................... 3 WARNING! FCC RF EXPOSURE REQUIREMENTS ................................................................... 4 1. GENERAL INFORMATION .................................................................................................... 6 1.1 INTRODUCTION ......................................................................................................... 6 1.2 RF EXPOSURE SAFETY STATEMENT ................................................................... 6 2. ACCESSORIES ...................................................................................................................... 7 2.1 PACKING LIST ........................................................................................................... 7 2.2 OPTIONS ..................................................................................................................... 7 3. ABOUT THIS RADIO ............................................................................................................ 8 3.1 ABOUT THE VHF MARINE BAND .......................................................................... 8 3.2 ABOUT THE LMR CHANNELS ................................................................................ 8 3.3 ABOUT WATER RESISTANCE ................................................................................. 8 3.4 EMERGENCY (CHANNEL 16 USE) .......................................................................... 8 3.5 CALLING ANOTHER VESSEL (CHANNEL 16 OR 9) ............................................ 9 3.6 OPERATING ON CHANNEL 13 ............................................................................. 10 3.7 OPERATING ON CHANNEL 67 ............................................................................. 10 3.8 SIMPLEX/DUPLEX CHANNEL USE ....................................................................... 10 4. GETTING STARTED ............................................................................................................ 12 4.1 RADIO CARE ............................................................................................................ 12 4.2 BELT CLIP INSTALLATION AND REMOVAL ............................................................ 12 4.3 BATTERIES AND CHARGERS ............................................................................... 13 4.3.1 BATTERY SAFETY ....................................................................................... 13 4.3.2 BATTERY INSTALLATION AND REMOVAL ................................................. 14 4.3.3 BATTERY CHARGING ................................................................................. 15 5. CONTROLS AND INDICATORS ......................................................................................... 16 5.1 CONTROLS AND SWITCHES ................................................................................ 16 5.2 LCD INDICATORS .................................................................................................... 19 6. BASIC OPERATION ............................................................................................................ 20 6.1 INITIAL SETUP ......................................................................................................... 20 6.2 RECEPTION .............................................................................................................. 20 6.3 TRANSMISSION ....................................................................................................... 20 6.3.1 TRANSMIT TIME-OUT TIMER (TOT) ........................................................... 21 6.4 INTERNATIONAL, CANADIAN AND USA CHANNELS ........................................ 21 6.5 NOAA WEATHER CHANNELS ................................................................................. 22 6.5.1 NOAA WEATHER ALERT ............................................................................. 22 6.5.2 NOAA WEATHER ALERT TESTING ............................................................ 22 6.6 KEYPAD LOCKING .................................................................................................. 23 6.7 PRESET CHANNELS (0 ~ 9): INSTANT ACCESS ................................................ 23 6.7.1 PROGRAMMING .......................................................................................... 23 6.7.2 OPERATION ................................................................................................. 23 6.8 MEMORY SCAN ....................................................................................................... 24 6.9 PRIORITY SCAN ...................................................................................................... 25 6.10 DUAL WATCH ........................................................................................................... 26 6.11 TRI-WATCH ............................................................................................................... 26 6.12 VOICE SCRAMBLER ................................................................................................ 27 7. MENU (“SET”) MODE .......................................................................................................... 28 8. MAINTENANCE .................................................................................................................... 32 8.1 GENERAL .................................................................................................................. 32 8.2 REPLACEMENT PARTS .......................................................................................... 32 8.3 FACTORY SERVICE ................................................................................................. 33 8.4 TROUBLESHOOTING CHART ................................................................................ 33 9. VHF MARINE CHANNEL ASSIGNMENT .......................................................................... 34 10. WARRANTY .......................................................................................................................... 38 11. INSTALLATION OF OPTION .............................................................................................. 41 11.1 FBA-42 ALKALINE BATTERY TRAY ...................................................................... 41 12. SPECIFICATIONS ................................................................................................................. 42 12.1 GENERAL .................................................................................................................. 42 12.2 TRANSMITTER ......................................................................................................... 42 12.3 RECEIVER ................................................................................................................ 43 FCC AND CANADA RADIO LICENSE INFORMATION ......................................................... 44 Page 2 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 QUICK REFERENCE GUIDE This transceiver is equipped with the E2O (Easy-To-Operate) system. You can do the basic operation in numerical order of the illustration below. [PWR/VOL] KNOB Rotate this knob clockwise to turn on the radio, and adjust the audio level. [PTT] SWITCH MIC Speak into the microphone in a normal voice level while pressing this switch. When transmitting, position your mouth 1 inch (2.5 cm) away from the small mic hole. Speak slowly and clearly into the microphone. [16/9] BUTTON Press to recall channel 16. Press and hold to recall channel 9. [H/L( [SQL] BUTTON )] BUTTON Press this key first, then press the [ ] key to squelch or press the [] key to un-squelch the radio. Press to toggle the transmit power between High (5W) and Low (1W). []/[] BUTTONS Selects the operating channel. NOTE For additional details, refer to next page or section “5. CONTROLS AND INDICATORS”. HX400 Page 3 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 WARNING! FCC RF EXPOSURE REQUIREMENTS This Radio has been tested and complies with the Federal Communications Commission (FCC) RF exposure limits for Occupational Use/Controlled exposure environment. In addition, it complies with the following Standards and Guidelines: FCC 96-326, Guidelines for Evaluating the Environmental Effects of Radio-Frequency Radiation. FCC OET Bulletin 65 Edition 97-01 (2001) Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields - RF and Microwave. WARNING: This radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as Occupational Use Only, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is not intended for use by the General Population in an uncontrolled environment. CAUTION: To ensure that your expose to RF electromagnetic energy is within the FCC allowable limits for occupational use, always adhere to the following guidelines: This radio is NOT approved for use by the general population in an uncontrolled exposure environment. This radio is restricted to occupational use, work related operations only where the radio operator must have the knowledge to control his or her RF exposure conditions. When transmitting, hold the radio in a vertical position with its microphone 1 inche (2.5 cm) away from your mouth and keep the antenna at least 1 inches (2.5 cm) away from your head and body. The radio must be used with a maximum operating duty cycle not exceeding 50%, in typical Push-to-Talk configurations. DO NOT transmit for more than 50% of total radio use time (50% duty cycle). Transmitting more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. Page 4 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 SAR compliance for body-worn use was only demonstrated for the specific belt-clip (CLIP-22). Other body-worn accessories or configurations may NOT comply with the FCC RF exposure requirements and should be avoided. The CLIP-22 belt-clip must be used in order to comply with the FCC/IC RF exposure requirements. Always use Standard Horizon authorized accessories. The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to assure that this radio operates with the FCC RF exposure limits of this radio. Electromagnetic Interference/Compatibility During transmissions, this radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. Do not operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, health care facilities, aircraft, and blasting sites. HX400 Page 5 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 1. GENERAL INFORMATION 1.1 INTRODUCTION Congratulations on your purchase of the HX400! Whether this is your first portable marine VHF transceiver, or if you have other STANDARD HORIZON equipment, the STANDARD HORIZON organization is committed to ensuring your enjoyment of this high performance transceiver, which should provide you with many years of satisfying communications even in the harshest of environments. STANDARD HORIZON technical support personnel stands behind every product sold, and we invite you to contact us should you require technical advice or assistance. The HX400 is a JIS-8 / IPX8 (1.5 m (about 5Ft) for 30 minutes) Submersible 5Watt portable two way marine transceiver with the capability to be programmed with 40 LMR (Land Mobile Radio) channels with CTCSS or DCS signalling by a dealer. The transceiver has all allocated USA, Canadian, or International channels. It has emergency channel 16 which can be immediately selected from any channel by pressing the key. The HX400 includes the following features: 10 programmable Preset Channels, Memory, Priority, Dual Watch and TRI-Watch scanning, Battery Saver, easy-to-read large LCD display, EEPROM memory back-up, Battery Life displayed on the LCD, and a transmit Time-Out Timer (TOT), Noise Canceling Microphone and Voice Scrambler. The HX400 transmitter provides a full 5 Watt of transmit power and also is selectable to 1 Watt to assist the user in ensuring maximum battery life. We appreciate your purchase of the HX400, and encourage you to read this manual thoroughly, so as to learn and fully understand the capabilities of the HX400. 1.2 RF EXPOSURE SAFETY STATEMENT Your wireless handheld portable transceiver contains a low power transmitter. ) button is pushed, the transceiver sends out When the Push-To-Talk (PTT: radio frequency (RF) signals. This device is authorized to operate at a duty factor not to exceed 50% (this corresponds to 50% transmission time and 50% reception time). This transmitter and its antenna must maintain a separation distance of at least 1 inch (2.5 cm) from your face. Speak in a normal voice, with the antenna pointed up and away from the face at the required separation distance. Use only the supplied antenna. Unauthorized antennas, modifications, or attachments could damage the transmitter. Page 6 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 2. ACCESSORIES 2.1 PACKING LIST When the package containing the transceiver is first opened, please check it for the following contents: HX400 Transceiver CAT460 Antenna FNB-115LI 7.4 V, 2400 mAh Li-Ion Battery Pack CD-50 Charger Cradle for HX400 PA-45B 120VAC Wall Charger for CD-50 E-DC-30 DC Cable with 12 V Cigarette Lighter Plug CLIP-22 Belt Clip Hand Strap Owner’s Manual 2.2 OPTIONS MH-73A4B MH-57A4B VC-24 VC-27 CN-3 CD-50 FNB-115LI FBA-42 PA-45B/C/U E-DC-30 Speaker/Microphone Mini Speaker/Microphone VOX Headset Earpiece/Microphone Radio-to-Ship’s Antenna Adapter Charger Cradle 7.4 V, 2400 mAh Li-Ion Battery Pack Alkaline Battery Case AC Wall Charger for the FNB-115LI DC Cable with 12 V Cigarette Lighter Plug : “B” suffix is for use with 120 VAC (Type-A plug), “C” suffix is for use with 230 VAC (Type-C plug), and “U” suffix is for use with 230 VAC (Type-BF plug). Note: Before operating the HX400 for the first time, it is recommended that the battery be charged. Please see section “4.3.3 BATTERY CHARGING” for details. HX400 Page 7 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 3. ABOUT THIS RADIO 3.1 ABOUT THE VHF MARINE BAND The radio frequencies used in the VHF marine band lie between 156 and 162 MHz. The marine VHF band provides communications over distances that are essentially “Line of sight” Actual transmission range depends much more on antenna type, gain and height than on the power output of the transmitter. On a fixed mount 25 W radio transmission expected distances can be greater than 15 miles, for a portable 5 W radio transmission the expected distance can be greater than 5 miles in “Line of sight”. The user of a Marine VHF radio is subject to severe fines if the radio is used on land. The reasoning for this is you may be near an inland waterway, or propagation anomalies may cause your transmission to be heard in a waterway. If this occurs, depending upon the marine VHF channel on which you are transmitting, you could interfere with a search and rescue case, or contribute to a collision between passing ships. For VHF Marine channel assignments refer to page 34 section 9. 3.2 ABOUT THE LMR CHANNELS The HX400 is capable of being programmed with 40 LMR (Land Mobile Radio) channels by a dealer. The frequency range is 134 to 174MHz which may be setup for 25 kHz (wide) or 12.5 kHz (narrow) channel stepping with CTCSS and DCS signaling. Contact your dealer for further details. 3.3 ABOUT WATER RESISTANCE Water resistance of the transceiver is ensured only when the battery pack is attached to the transceiver and MIC/SP cap is installed in the MIC/SP jack. 3.4 EMERGENCY (CHANNEL 16 USE) Channel 16 is known as the Hail and Distress Channel. An emergency may be defined as a threat to life or property. In such instances, be sure the transceiver is on and set to “Channel 16”. Then use the following procedure: ) switch and say “Mayday, Mayday, May1. Press the PTT (Push-To-Talk: day. This is _____, _____, _____” (your vessel’s name). 2. Then repeat once: “Mayday, _____” (your vessel’s name). 3. Now report your position in latitude/longitude, or by giving a true or magnetic bearing (state which) to a well-known landmark such as a navigation aid or geographic feature such as an island or harbor entry. 4. Explain the nature of your distress (sinking, collision, aground, fire, heart attack, life-threatening injury, etc.). 5. State the kind of assistance your desire (pumps, medical aid, etc.). Page 8 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 6. Report the number of persons aboard and condition of any injured. 7. Estimate the present seaworthiness and condition of your vessel. 8. Give your vessel’s description: length, design (power or sail), color and other distinguishing marks. The total transmission should not exceed 1 minute. 9. End the message by saying “OVER”. Release the PTT ( ) switch and listen. 10. If there is no answer, repeat the above procedure. If there is still no response, try another channel. 3.5 CALLING ANOTHER VESSEL (CHANNEL 16 OR 9) Channel 16 may be used for initial contact (hailing) with another vessel. However, its most important use is for emergency messages. This channel must be monitored at all times except when actually using another channel. It is monitored by the U.S. and Canadian Coast Guards and by other vessels. Use of channel 16 for hailing must be limited to initial contact only. Calling should not exceed 30 seconds, but may be repeated 3 times at 2-minute intervals. In areas of heavy radio traffic, congestion on channel 16 resulting from its use as a hailing channel can be reduced significantly in U.S. waters by using Channel 9 as the initial contact (hailing) channel for non-emergency communications. Also hailing on channel 9, the calling time should not exceed 30 seconds but may be repeated 3 times at 2-minute intervals. Prior to making contact with another vessel, refer to the channel charts in this manual, and select an appropriate channel for communications after initial contact. For example, Channels 68 and 69 of the U.S. VHF Charts are some of the channels available to non-commercial (recreational) boaters. Monitor your desired channel in advance to make sure you will not be interrupting other traffic, and then go back to either channel 16 or 9 for your initial contact. When the hailing channel (16 or 9) is clear, state the name of the other vessel you wish to call and then “this is” followed by the name of your vessel and your Station License (Call Sign). When the other vessel returns your call, immediately request another channel by saying “go to”, the number of the other channel, and “over”. Then switch to the new channel. When the new channel is not busy, call the other vessel. ) switch. After a transmission, say “over”, and release the PTT (Push-To-Talk: When all communication with the other vessel is completed, end the last transmission by stating your Call Sign and the word “out”. Note that it is not necessary to state your Call Sign with each transmission, only at the beginning and end of the contact. Remember to return to Channel 16 when not using another channel. HX400 Page 9 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 3.6 OPERATING ON CHANNEL 13 Channel 13 is used at docks, bridges and for maneuvering in port. Messages on this channel must concern navigation only, such as meeting and passing in restricted waters. In emergencies and when approaching blind river bends, High power is allowed. Pressing the key will change the power output from Low Power (1 Watt) to High (5 Watts). When you change from this channel then return to it, low power will be automatically selected. 3.7 OPERATING ON CHANNEL 67 When channel 67 is used for navigational bridge-to-bridge traffic between ships, High power may be used temporarily (in the USA band) by pressing the key. When release the PTT switch, the transceiver will revert to low power. 3.8 SIMPLEX/DUPLEX CHANNEL USE Refer to the VHF MARINE CHANNEL CHART (page 35) for instructions on use of simplex and duplex channels. NOTE All channels are factory-programmed in accordance with FCC, Industry Canada, and International regulations. The mode of operation cannot be altered from simplex to duplex or vice-versa. Simplex (ship to ship) or duplex (marine operator) mode is automatically activated, depending on the channel and whether the USA, Canadian or International operating band is selected. Page 10 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 MEMO HX400 Page 11 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 4. GETTING STARTED 4.1 RADIO CARE CAUTION Before following the instructions below, insure the battery pack is in place and firmly connected. Care must be taken if the radio was dropped and a close inspection may be needed to insure the radio case and gaskets are in adequate condition. The design of the HX400 allows water to enter between the radio and the battery pack, however waterproof performance is not compromised. After using the HX400 in salt water environment is recommended to clean the radio with fresh water by rinsing the battery and radio (separately) under a sink facet or by dunking in a fresh water. After washing,use a soft cloth to thoroughly dry all parts of the radio and battery. This will keep the radio parts and the battery clean and in top operating condition. 4.2 BELT CLIP INSTALLATION AND REMOVAL To install the Belt Clip: align the Belt Clip to the groove of the Battery pack, then press the Belt Clip downward until it locks in place with a “Click.” To remove the Belt Clip: press the Belt Clip Tab away from the battery pack to unlock the Belt Clip, then slide the Belt Clip upward to remove it. Belt Clip Tab Page 12 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 4.3 BATTERIES AND CHARGERS If the radio has never been used, or its charge is depleted, it may be charged by connecting the CD-50 Charger Cradle with the PA-45B Battery Charger, as shown in the illustration. If 12V DC power is available, the supplied E-DC-30 DC Cable with 12 V Cigarette Lighter Plug may be used for charging the battery. The PA-45B and E-DC-30 will charge a completely discharged FNB-115LI battery pack in approximately 3 hours. The FNB-115LI is a high performance Li-Ion battery providing high capacity in a compact package. CAUTION To avoid risk of explosion and injury, FNB-115LI battery pack should only be removed, charged or recharged in non-hazardous environments. 4.3.1 BATTERY SAFETY Battery packs for your transceiver contain Li-Ion batteries. This type of battery stores a charge powerful enough to be dangerous if misused or abused, especially when removed from the transceiver. Please observe the following precautions: DO NOT SHORT BATTERY PACK TERMINALS: Shorting the terminals that power the transceiver can cause sparks, severe overheating, burns, and battery cell damage. If the short is of sufficient duration, it is possible to melt battery components. Do not place a loose battery pack on or near metal surfaces or objects such as paper clips, keys, tools, etc. When the battery pack is installed on the transceiver, the terminals that transfer current to the transceiver are not exposed. The terminals that are exposed on the battery pack when it is mounted on the transceiver are charging terminals only and do not constitute a hazard. DO NOT INCINERATE: Do not dispose of any battery in a fire or incinerator. The heat of fire may cause battery cells to explode and/or release dangerous gases. Battery Maintenance For safe and proper battery use, please observe the following: Battery packs should be charged only in non-hazardous environments; Use only STANDARD HORIZON-approved batteries; Use only a STANDARD HORIZON approved charger. The use of any other charger may cause permanent damage to the battery. Follow charging instructions provided with the chargers. Keep the battery contacts clean and dry. HX400 Page 13 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 Battery Storage Store the batteries in a cool place to maximize storage life. Since batteries are subject to self-discharge, avoid high storage temperatures that cause large self-discharge rates. After extended storage, a full recharge is recommended. Battery Recycling DO NOT PLACE USED BATTERIES IN YOUR REGULAR TRASH! LI-ION BATTERIES MUST BE COLLECTED, RECYCLED OR DISPOSED OF IN AN ENVIRONMENTALLY SOUND MANNER. The incineration, land filling or mixing of Li-Ion batteries with the municipal solid waste stream is PROHIBITED BY LAW in most areas. Return batteries to an approved Li-Ion battery recycler. This may be where you purchased the battery. Contact your local waste management officials for other information regarding the environmentally sound collection, recycling and disposal of Li-Ion batteries. 4.3.2 BATTERY INSTALLATION AND REMOVAL To install the battery pack, hold the transceiver with your left hand, so your palm is over the speaker. Insert the battery pack into the battery compartment on the back of the radio, then push the bottom side of the battery pack until the battery pack locks with the Battery Pack Latch. To remove the battery, turn the radio off. Slide the Battery Pack Latch on the bottom of the radio, then lift up on the bottom of the battery and remove it from the radio. HAND STRAP INSTALLATION Page 14 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 4.3.3 BATTERY CHARGING 1. Turn the transceiver off. 2. Insert the DC plug from the PA-45B into the DC jack on the CD-50 side panel, then plug the PA-45B into the AC line outlet. 3. Insert the HX400 (with the battery pack) into the CD-50; the antenna should be at the left side when viewing the charger from the front. 4. If the HX400 is inserted correctly, the Red “CHARGING” indicator will glow. A fullydischarged pack will be charged completely in approximately 3 hours. CD-50 5. When charging is completed, the red LED indicator will change to green. Remove the transceiver from the CD-50, and unplug the PA-45B from the AC line outlet. PA-45B CAUTION The CD-50 cradle is NOT designed to be waterproof. Do not attempt to charge in water hazardous locations. NOTE The CD-50 cradle is only designed for the charging of the HX400’s battery, and is not suitable for other purposes. The CD-50 may contribute noise to TV and radio reception in the immediate vicinity, so we do not recommend its use adjacent to such device. HX400 Page 15 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 5. CONTROLS AND INDICATORS 5.1 CONTROLS AND SWITCHES NOTE This section defines each control of the transceiver. For detailed operating instructions, refer to section “6. BASIC OPERATION”. Refer to illustrations for the location of the following controls, switches, and connections. ANT Jack (Top Panel) The supplied CAT460 flexible antenna is attached here. MIC/SP Jack (Top Panel) The jack accepts the optional MH73A4B Speaker/Microphone, MH57A4B Mini Speaker/Microphone, VC-24 VOX Headset, or VC-27 Earpiece/Microphone. When this jack is used, the internal speaker and microphone are disabled. POWER Switch / VOLUME Control (VOL) Turns the transceiver on and off as well as adjusts the audio volume level. Turn this knob clockwise to turn the radio on and increase the speakers audio volume. Turn fully counter-clockwise to turn the radio off. Noise Canceling Microphone The noise canceling microphone is located here. Note: To cancel background noise when transmitting, care should be taken not to cover this mic hole with your hand. PTT (PUSH-TO-TALK) Switch When pushed activates the transmitter. LCD Display This display shows current operating conditions. Refer to page 19 for details. Page 16 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 Keypad Key Pressing this key immediately recalls channel 16 from any channel location. Holding down this key recalls channel 9. Pressing this key again reverts to the previous selected working channel. Secondary use: key is held and the key is pressed, the radio will change When the the marine band between the International, Canadian, and USA channels. Advanced use: When the key is held and the key is pressed, the radio will change the priority channel between the Channel 16, Channel 9, and the Preset Channel. Key Press this key to toggle the transmitter output power between “High” (5 Watts) and “Low” (1 Watt) power. When the “Low” power is selected, the “ ” icon will appear to the right of the channel indication on the display. This key does not function on the “Transmission Inhibited” and “Low power only” channels. Secondary use: Hold down this key to lock the keypad (except the and PTT ( ) keys) so that they are not accidentally changed. The “ ” icon will appear at the right of the channel indication on the display, to indicate that the functions are locked. Hold down this key until the “ ” icon disappears to unlock the radio. Advanced use: When the key is held and the key is pressed, the radio will change the priority channel between the Channel 16, Channel 9, and the Preset Channel. Key Press this key to recall the user preset memory channels (shown as memory channel number “0” - “9” on the display). Press the or key to select the desired preset channel. Press and hold this key for two seconds to memorize the selected channel into the preset memory. Key Press the key momentarily to increase the channel one step. Hold the key down to increase the channel continuously. Secondary use: Used to adjust the squelch threshold level up after the key is pressed. HX400 Page 17 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 Key Press the key momentarily to decrease the channel one step. Hold the key down to decrease the channel continuously. Secondary use: Used to adjust the squelch threshold level down after the key is pressed. Key Press this key to activate the squelch adjusting mode. Press the or key to adjust the squelch threshold level. Secondary use: Press and hold this key for two seconds to open the squelch, allowing you to monitor the operating channel. Release the key to resume normal (quiet) monitoring. Key Starts scanning and priority scanning of programmed channels. Secondary use: Press and hold the key for two seconds to activate the Dual Watch feature. Key Press to stop the Scan, Priority Scan, or Dual Watch feature. Secondary use: Press and hold this key to immediately recall the last-used NOAA Weather Channel from any channel location. Recalls the previously- selected working channel when the key is pressed again. Advanced use: When the key is held and the key is pressed, the radio will change the marine band between the USA, International, and Canadian channels. Speaker The internal speaker is located here. Microphone The internal microphone is located here. When transmitting, position your mouth 1 inch (2.5 cm) away from the small mic hole. Speak slowly and clearly into the microphone. Battery Pack Lock (Bottom side) Slide the Battery Pack Lock to the “” position for battery removal. Page 18 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 5.2 LCD INDICATORS Alpha/numeric “Tag” display Indicates the current channel name or operating mode. “PRI” Indicator This indicator is shown when the Priority channel is selected. “ ” Indicator This indicator appears when a signal is being received or when the radio is unsquelched. “U/I/C” Indicator These indicators show the “band” of operation for the particular channel. “U” indicates the USA band; “I” indicates the International band; and “C” indicates the Canadian band. “P” Indicator This indicator shows the channel is in the “PRESET” channel memory. “ “ “ “ “ ” Battery Indicator ”: Full battery ”: Lower battery ”: Battery is very low (Blinking)”: Prepare to charge the battery Channel Display The operating channel is shown on the LCD in both the transmission and reception modes. “ ” Indicator This indicator appears during transmission. “ ” Indicators This indicator shows the Voice Scrambler function is assigned to a channel. “ ” Indicator When the “ ” icon is shown on the LCD, all keys are disabled except for the PTT , and keys. “ ” Indicators This indicator shows when the TX output power is selected to “Low” (1 Watt) power. HX400 Page 19 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 6. BASIC OPERATION 6.1 INITIAL SETUP 1. Install the battery pack on the transceiver (see section “4.3.2 BATTERY INSTALLATION AND REMOVAL”). 2. Install the antenna onto the transceiver; hold the bottom end of the antenna, then screw it onto the mating connector on the transceiver until it is snug. Do not over-tighten. 6.2 RECEPTION 1. Turn the VOL knob clockwise to turn the transceiver on. The battery voltage will appear briefly at the upper left corner on the display, then the channel name will appear. key to activate the squelch adjusting 2. Press the SQL LVL mode (The “SQL LVL” notation will appear). Press the key until the “ ” indicator appears on the display, then press the key again. 3. Turn the VOL knob clockwise until the noise or audio from the speaker is at a comfortable level. 4. Press the key, then press the key until the random noise disappears. This state is known as the “Squelch Threshold”. 5. Press the or key to select the desired channel. Refer to the channel chart on page 35 for available channels. 6. When a signal is received, adjust the VOL knob to the desired listening level. The “ ” indicator on the LCD is displayed indicating that the channel is being used. 6.3 TRANSMISSION 1. Perform “6.2 RECEPTION” discussion above. 2. Before transmitting, monitor the channel and make sure it is clear. THIS IS AN FCC REQUIREMENT! 3. For communications over short distances, press the key to select Low power (1 watt: “ ” icon appears). Note: Transmitting on Low power prolongs battery life. Low power should be selected whenever possible. Page 20 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 4. If using Low power is not effective, select High power (5 watts: “ ” icon disappears) by pressing the key. 5. When receiving a signal, wait until the incoming signal stops before transmitting. The transceiver cannot transmit and receive simultaneously. ) switch to 6. Press and hold the PTT (Push-To-Talk: transmit. During transmission, the “ ” indicator will appear on the display. 7. Position your mouth 1 inch (2.5 cm) away from the mic hole. Speak slowly and clearly into the microphone. 8. When the transmission is finished, release the PTT ( ) switch. 6.3.1 TRANSMIT TIME - OUT TIMER (TOT) While the PTT ( ) switch is held down, transmission time is limited to 5 minutes. This prevents prolonged (unintentional) transmissions. About 10 seconds before automatic transmitter shutdown, a warning beep will sound from the speaker. The transceiver automatically switches to the receiving mode, even if the PTT ( ) switch is held down. Before transmitting again, the PTT ( ) switch must first be released. This Time-Out-Timer (TOT) prevents a continuous transmission that would result from an accidentally stuck PTT ( ) switch. NOTE The PTT ( ) switch is disabled for 10 seconds after the transceiver automatically switches to the receiving mode by the TOT feature. 6.4 USA, CANADIAN, AND INTERNATIONAL CHANNELS 1. To change from US to Canadian or International Marine Channels, hold key and press the key. The band will change from USA, down the to Canadian, and to International with each press. 2. “U” appears on the LCD for the USA band, “C” appears for the Canadian band, and “I” appears for the International band. 3. Refer to the marine channel charts in section “9 VHF MARINE CHANNEL ASSIGNMENTS” for allocated channels. “USA” BAND HX400 “CANADIAN” BAND “INTERNATIONAL” BAND Page 21 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 6.5 NOAA WEATHER CHANNELS In the event of a major storm or other appreciable weather condition requiring vessels at sea (or other bodies of water) to be notified, the NOAA (National Oceanographic and Atmospheric Administration) broadcasts a 1050 Hz tone which the HX400 can detect and alert you of pending storm warnings. The 1050 Hz tone, when detected, will produce a loud beep in the speaker of the HX400, to signal that a Weather Alert Broadcast is being received. 1. To receive a NOAA (National Oceanic and Atmospheric Administration) weather broadcast, press and hold the key. The transceiver changes to the weather channel mode and recalls the last used NOAA weather channel. This mode consists of a preset memory bank containing the NOAA weather channels. or key to change to other weather channels. 2. Press the 3. To exit from the weather channel mode, press and hold the key. The transceiver will revert to the channel you were using prior to switching to the weather channel mode. 6.5.1 NOAA WEATHER ALERT In the event of extreme weather disturbances such as storms and hurricanes, NOAA sends a “weather alert” consisting of a 1050 Hz tone, followed by weather reports on the weather channels. When a “weather alert” is received on a weather channel, the transceiver emits a beep tone. Press the key to stop the beep tone and listen to the weather reports. 6.5.2 NOAA WEATHER ALERT TESTING In order to test this system, NOAA broadcasts the 1050 Hz tone every Wednesday sometime between 11 AM and 1 PM local time. You may use this opportunity to test your HX400 periodically to confirm that the Weather Alert feature is working, or for training crew members on how to configure the HX400 to receive the NOAA Weather Alerts. Page 22 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 6.6 KEYPAD LOCKING In order to prevent accidental channel change, the HX400’s keypad may be locked. 1. Hold down the key to lock the keypad (except the PTT ( ), , and keys) so that they are not accidentally changed. The “ ” icon will appear next to the channel number on the display, indicating that the functions are locked. 2. Hold down the key until the “ ” icon disappears to unlock the radio. 6.7 PRESET CHANNELS (0 ~ 9): INSTANT ACCESS Ten user assigned channels can be programmed for instant access. Pressing the key activates the user assigned channel bank. 6.7.1 PROGRAMMING 1. Select the desired channel to be saved into the Preset channel bank using the or key. 2. Press and hold the key until the channel number blinks. The “P” icon and Preset channel number blink, then release the key. 3. Press the or key to select the desired Preset 0 ” ~ “9 9 ”). If you see the “Underscore” bechannel (“0 tween the current channel number and the Preset channel number, it means that the Preset channel currently has no data written on it (i.e. the channel is “free”). 4. Press the key to program the current channel into the Preset channel bank. 5. Repeat steps 3 and 4 to program the other channel into the Preset Channels, if desired. 6. To delete a Preset Channel, select the Preset Channel Number to be deleted using the or key, then press and hold the key until the Preset Channel Number is removed from the display. 6.7.2 OPERATION 1. Press the key to change the transceiver to the Preset channel mode. The “P” icon and Preset channel number will appear on the display. 2. Press the or key to select the desired Preset 0” through “9 9”). Channels (“0 3. To exit from the Preset channel mode, press the key. The transceiver will revert to the channel you were on prior to switching to the Preset channel mode. HX400 Page 23 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 6.8 MEMORY SCAN The HX400 will automatically scan channels programmed into Preset Channel Memory and also channels store into Scan Memory. When an incoming signal is detected on one of the channels during scan, the radio will pause on that channel, allowing you to listen to the incoming transmission. The radio will automatically start scanning again after the transmission stops. 6.8.1 PROGRAMMING SCAN MEMORY 1. Turn the transceiver off by rotating the VOL knob fully counter-clockwise. 2. Hold down the key, and then turn on the transceiver while still holding down the key. MEM CH 3. Press the or key to select “MEM CH” and press the key. 4. Press the or key to select desired channel to be scanned, then press the key. The “ ” icon appears on the display, which indicates the channel has been selected to the scan channel. 6. Repeat step 5 for all the desired channels to be programmed into scan memory. 7. To DELETE a channel from the list, select the channel then press the key. The “ ” icon disappears from the display. 8. When you have completed programming the scan memory, press the key to save your changes, and then press the key to exit to normal operation. 6.7.2 OPERATION 1. Press the key to activate the squelch adjusting mode, then press the key until the background noise disappears. 2. Press the key to start scanning channels proMSCAN grammed into memory and preset channels. “MSCAN MSCAN” will be shown in the upper left corner of the display. 3. When the HX400 receives a transmission, it will stop on the channel until the incoming signal disappears, then start scanning again. 4. To stop scanning, press the key. Page 24 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 6.9 PRIORITY SCAN The Priority Scan is similar to the Memory Scan. However, the Priority Scan monitors the Preset Channels, Scan Memory Channels and the Priority Channel. The following channels can be set as the Priority channel: CH16, CH9, or one of the Preset channel (default setting is CH16). 1. To set the priority channel, hold down the key and press the key. The channel will change from 16 to 09 to Preset channels 0 through 9 with each press of the key. When the key is released the displayed channel will be set as the priority channel (the “PRI” icon will appear above of the channel number). 2. Press the key to start Scanning. PSCAN 3. Press and hold the key to start Priority Scan, “PSCAN PSCAN” will be shown on the display. 4. When the HX400 receives a transmission on a working channel, it will stop on the working channel and dual watch to the priority channel until the incoming signal disappears, then start scanning again. 5. When the HX400 receives a signal on the Priority channel it will stay on this channel until the incoming signal disappears, then start Priority scanning again. 6. To stop Priority Scanning, press the key. Preset Channel “5” Preset Channel “0” Preset Channel “5” Scan Memory Channel Preset Channel “0” Scan Memory Channel Preset Channel “4” Preset Channel “1” Preset Channel “4” Preset Channel “1” Scan Memory Channel Preset Channel “2” Scan Memory Channel Preset Channel “2” Preset Channel “3” Scan Memory Channel “MEMORY” SCAN HX400 Scan Memory Channel Preset Channel “3” Scan Memory Channel Scan Memory Channel “PRIORITY” SCAN Page 25 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 6.10 DUAL WATCH The Dual Watch feature allows the radio to scan between the Priority Channel and one other channel. 1. To set the Priority channel, hold down the key and press the key, when the channel you want is shown, release the key. 2. Select the desired channel you want to Dual watch to the priority channel using the or key. 3. Press and hold the key for two seconds to activate DW the Dual Watch feature. A “DW DW” notation will appear on the upper left corner of the display when the Dual Watch feature is activated. 4. When a transmission is received on the “Priority” channel, the radio will stay on the “Priority Channel” until the incoming signal disappears. 5. When the radio receives a transmission on the working channel, the radio will Dual Watch between the working channel and Priority channel. 6. The radio will resume Dual Watch when the incoming signal disappears at the end of the transmission. 7. To stop the Dual Watch feature and return to normal operation, press the key briefly. 6.11 TRI-WATCH You may change the Dual Watch feature to Tri-watch via the Menu (“Set”) Mode. Refer to Menu Mode Item “DUAL WATCH MODE” on page 29 for details. Tri-Watch scans Channel 16, 9, and one other channel. When enabled the TW 16 9” in the upper left corner of the display. HX400 will show “TW 16/9 1. Press and hold the key for two seconds to activate TW 16 9” will appear on the the TRI-Watch feature. “TW 16/9 upper left corner of the display when the Tri-Watch feature is activated. 2. When a transmission is received on the channel 16, Current Channel 16 radio will stay on the channel 16 until the incoming sig- Channel nal disappears. DUAL WATCH 3. When a transmission is received on the channel 9, the Current Channel radio will Dual watch between the channel 16 and channel 9. 4. When the radio receives a transmission on the work- Channel 9 Channel 16 ing channel, the radio will Tri-watch between the workTRI-WATCH ing channel, channel 16 and channel 9. 5. To stop the Tri-watch feature and return to normal operation, press the key. Page 26 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 6.12 VOICE SCRAMBLER The built-in scrambler is 4 code voice inversion type which is compatible with the optional scramblers fitted into other Standard Horizon Hand Helds (FRP31) and Fixed Mounted VHF radios (CVS2500). When the HX400 voice scrambler is enabled your voice will be scrambled to all persons listening on a specific channel and may only be decoded by another Standard Horizon VHF with scrambler capability. To activate the Voice Scrambler: 1. Select the channel you wish to activate the Voice Scrambler. 2. Turn the transceiver off by rotating the VOL knob fully counter-clockwise. 3. Hold down the key, then turn on the transceiver while still holding down the key. SCRAM4. Press the or key to select the Menu item “SCRAMBLER BLER” and press the key. 5. Press the or key to select the desired scramble SC0, SC1, SC2, or SC3). code (SC 6. After selecting the scrambler code, press the key to save the setting to memory, then press the key exit Setup mode. “ ” icon will be shown to the right of the channels when the scramber is enabled. oFF” in step 4 above. To disable the Voice Scrambler, select “oF If you want to activate the Voice Scrambler to other channel, repeat procedures above. You may select a different scramble code for each channel. HX400 Page 27 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 7. MENU (“SET”) MODE The Setup Menu allows a number of the HX400 operating parameters to be custom-configured for your operating requirements. The Menu Mode is easy to activate and set, using the following procedure: 1. Turn the transceiver off by rotating the VOL knob fully counter-clockwise. 2. Hold down the key, then turn on the transceiver while still holding down the key. 3. The Menu item will scroll on the upper left corner of the display and its current status or value will appear on the large display. 4. Press the or key to select the Menu item to be adjusted. 5. Press the key to enable adjustment of the selected Menu item. The current status or value will blink. 6. Press the or key to select the desired status or value of the Menu item. key to save the new set7. After completing your adjustment, press the ting. 8. If you wish to change another Menu item, repeat steps 4 to 7 above. 9. Press the key to exit to normal operation. BEEP LEVEL Function: Enables/Disables the Keypad beep. Available Values: HI / Lo / oFF Default: HI LAMP MODE Function: Selects the Lamp illumination method for the LCD/Keypad. Available Values: KEY / Cnt (Continuous) / oFF Default: KEY KEY: Illuminates the LCD/Keypad for 5 seconds when any key is pressed. Cnt (Continuous): Illuminates the LCD/Keypad continuously. oFF: Turns off the backlight for the LCD and keys. SCAN LAMP Function: Enables/Disables the Lamp while scanner is paused. Available Values: on / oFF Default: on Page 28 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 DUAL WATCH MODE Function: Selects dual or tri-watch as desired. Available Values: t- (Tri Watch) / d- (Dual Watch) Default: d- (Dual Watch) t- (Tri Watch): The radio watches the activity of CH16, CH9, and the current channel. d- (Dual Watch): The radio watches the the activity of the current channel and the Priority channel. DIMMER MODE Function: Selects the display brightness level. Available Values: 0 / 1 / 2 / 3 Default: 3 WX ALERT MODE Function: Enables/Disables the NOAA Weather Alert function. Available Values: on / oFF Default: on DUAL WATCH DISPLAY Function: Selects the display mode while Dual Watch scanning. Available Values: nor (Normal) / SPC (Special) Default: nor (Normal) When this menu is set to “Normal”, the channel numbers during dual watch will be shown scrolling on the display. When “Special” is selected the channel numbers on the display do not change unless a call was received. The channel shown is the last channel that was received. This is a handy feature if you cannot look at the radio the moment a transmission was received. SCAN DISPLAY Function: Selects display mode while scanning. Available Values: nor (Normal) / SPC (Special) Default: nor (Normal) When this menu is set to “Normal”, the channel numbers during dual watch will be shown scrolling on the display. When “Special” is selected the channel numbers on the display do not change unless a call was received. The channel shown is the last channel that was received. This is a handy feature if you cannot look at the radio the moment a transmission was received. HX400 Page 29 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 CH NAME Function: Changes the channel name shown on the display. To change the channel name: 1. Select the channel you wish to change the name before following the steps below. 2. Turn off the HX400 by rotating the VOL knob counter clockwise. 3. Hold down the key, then turn on the transceiver while still holding down the key. CH NAME 4. Press the or key to select “CH NAME”. 5. Press the key. The current channel name will appear on the upper left corner of the display. or key to select the first character (letter, number, or sym6. Press the bol) in the name, then press the key to move to the next character. 7. Repeat step 6 as many times as necessary to complete the name tag (up to 12 characters). 8. After completing your adjustment, press the key to save the new setting. key to exit to normal operation. 9. Press the MEM CH Function: Programming Scan Memory. See page 24 for details of the programming. SCRAMBLER Function: Enables/Disables the Voice Scrambler and selects its scramble code. Available Values: oFF / SC0 / SC1 / SC2 / SC3 Default: oFF NOISE CANCEL Function: Enables/Disables the Noise Canceling Microphone. Available Values: on / oFF Default: on Page 30 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 MEMO HX400 Page 31 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 8. MAINTENANCE 8.1 GENERAL The inherent quality of the solid-state components in STANDARD HORIZON radios will provide many years of continuous use. Take the following precautions to prevent damage to the radio. To prevent corrosion of electrical contacts and keep the water resistance, keep the microphone or the jack connected at all times. Never press the PTT switch unless an antenna or suitable dummy load is connected to the antenna receptacle. Ensure that the input voltage does not exceed the value specified in your Owner’s Manual. Use only STANDARD HORIZON-approved accessories and replacement parts. 8.2 REPLACEMENT PARTS Occasionally an owner needs a replacement part. These can be ordered from our Parts Department by writing or calling: Marine Division of Vertex Standard US Headquarters 10900 Walker Street, Cypress, CA 90630, U.S.A. Telephone (714) 827-7600 ex6800 (Parts Department) Commonly requested parts, and their part numbers are listed below. CAT460 Antenna: Q3000176 VOL Knob: RA1193900 MIC/SP Rubber Cap: RA1194200 MIC/SP Plastic Cap: RA108700B CLIP-22 Belt Clip: AAH97X001 Hand Strap: S6000418 Page 32 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 8.3 FACTORY SERVICE In the unlikely event that the radio fails to perform or needs servicing, please contact the following: Standard Horizon Attention Marine Repair Department 10900 Walker Street, Cypress, CA 90630 Telephone (800) 366-4566 An “RA” Return Authorization number is not necessary to send a product in for service. Include a brief note describing the problem along with your name, return address, phone number, and proof of purchase. 8.4 TROUBLESHOOTING CHART SYMPTOM The key does not start the scan. PROBABLE CAUSE REMEDY No channels memorized. Use the key to enter desired channels into the Preset memory. Squelch is not adjusted. Adjust the squelch to threshold or to the point where noise just disappears. Further adjustment of the squelch control may eliminate incoming signals. Cannot select between USA, INTL, or Canadian bands. Proper operation not followed. HOLD down the the key. Speaker audio is not heard when the key is pressed and held. Low battery. Charge battery. Refer to section 4.3.3 of this manual. Audio volume level is too low. Turn the VOL knob clockwise. Some keys do not operate. Key Lock is on. Turn the Key Lock off. Refer to section 6.6 of this manual. Charging indicator on CD- Defective battery FNB50 does not illumininate. 115LI. Battery contacts not making contact with the charger cradle. HX400 key and press Contact Standard Horizon Product Support at (800)767-2450. Page 33 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 9. VHF MARINE CHANNEL ASSIGNMENTS Tables on the following pages list the VHF Marine Channel assignments for U.S.A. and International use. Below are listed some data about the charts. 1. VTS. Where indicated, these channels are part of the U.S. Coast Guard’s Vessel Traffic System. 2. Alpha channel numbers, that is, channel numbers followed by the letter A (such as Channel 07A) are simplex channels on the U.S.A. or Canadian channel assignments whose counterparts in the International assignments are duplex channels. International channels do not use “alpha” numbers. If you call the Coast Guard on Channel 16, they will sometimes ask you to “go to channel 22 Alpha.” This is a channel assigned to U.S.A, and Canadian Coast Guards for handling distress and other calls. If your radio is set for International operation you will go to Channel 22 instead of 22A, and will not be able to communicate with the Coast Guard. To use Channel 22A, your radio must be set for USA or Canada operation, usually by a U/ I/C (USA/International/Canada) control or combination of controls. Channel 22 (without an “A”) is an International duplex channel for port operations. Some radios indicate an “A” adjacent to the alpha channels on the display; on others “alpha” is not indicated but the proper channel is selected based on the U/I/C setting. 3. Bridge-to-Bridge channels (for example, Channel 13) are for use by bridge operators on inter-coastal waterways and rivers. It is also used by marine vessels in the vicinity of these bridges for navigation and for communicating with the bridge operators. Note that a limit of 1 Watt is specified for these channels. 4. The S/D column on the chart indicates either S (simplex) or D (duplex). Simplex means transmitting and receiving on the same frequency. Only one party at a time can talk, unlike a telephone. Be sure to say “over” and release your microphone push-to-talk switch at the end of each transmission. Duplex operation involves the use of one frequency for transmitting and a separate frequency for receiving. On channels specified as duplex on the charts, correct mode of operation is established automatically by your radio when you select a channel; you cannot change the mode. And you still must release the push-totalk switch after each transmission in order to listen to the radio. 5. Channels normally used by recreational boaters are those that include the term “non-commercial” in the Channel Use column of the chart. Some of these are shared with other users and some are used only in certain geographic regions. 6. Marine vessels equipped with VHF radios are required to monitor Channel 16. Page 34 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 CH 01 01A 02 03 03A 04 04A 05 05A 06 07 07A 08 09 10 11 12 13 14 15 15 16 17 18 18A 19 19A 19A 20 20A 21 21A 22 22A 23 23A 24 25 26 27 28 HX400 VHF MARINE CHANNEL CHART I S/D TX RX CHANNEL USE X D 156.050 160.650 Public Correspondence (Marine Operator) 156.050 Port Operation and Commercial. VTS in selected areas X D 156.100 160.700 Public Correspondence (Marine Operator) X D 156.150 160.750 Public Correspondence (Marine Operator) 156.150 U.S. Government Only, Coast Guard X D 156.200 160.800 Public Correspondence (Marine Operator), Port operation, ship movement 156.200 Pacific coast: Coast Guard, East Coast: Commercial fishing X D 156.250 160.850 Public Correspondence (Marine Operator), Port operation, ship movement 156.250 Port operation. VTS in Seattle X S 156.300 Inter-ship Sefety X D 156.350 160.950 Public Correspondence (Marine Operator), Port operation, ship movement 156.350 Commercial X S 156.400 Commercial (Inter-ship only) X S 156.450 Boater Calling channel, Commercial & Non-commercial (Recreational) X S 156.500 Commercial X S 156.550 Commercial. VTS in selected areas. X S 156.600 Port operation. VTS in selected areas. X S 156.650 Inter-ship Navigation Safety (Bridge-to-bridge) X S 156.700 Port operation. VTS in selected areas. --156.750 Environmental (Receive only) X S 156.750 Commercial, non-commercial, ship movement (1 W) X S 156.800 International Distress, Safety and Calling X S 156.850 State Controlled (1 W) X D 156.900 161.500 Port operation, ship movement 156.900 Commercial X D 156.950 161.550 Port operation, ship movement 156.950 US: Commercial 156.950 Coast Guard X D 157.000 161.600 Canadian Coast Guard Only, International: port operations and shipment 157.000 Port operation X D 157.050 161.650 Port operation, ship movement 157.050 U.S. Government Only, Canadian Coast Guard X D 157.100 161.700 Port operation, ship movement 157.100 US and Canadian Coast Guard Liaison and Maritime Safety Information Broadcasts announced on channel 16 X D 157.150 161.750 Public Correspondence (Marine Operator) 157.150 U.S. Government Only X D 157.200 161.800 Public Correspondence (Marine Operator) X D 157.250 161.850 Public Correspondence (Marine Operator) X D 157.300 161.900 Public Correspondence (Marine Operator) X D 157.350 161.950 Public Correspondence (Marine Operator) X D 157.400 162.000 Public Correspondence (Marine Operator) Page 35 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 CH 60 61 61A 62 62A 63 63A 64 64A 65A 66 66A 67 68 69 70 71 72 73 74 75 76 77 77 78 78A 79 79A 65 Page 36 VHF MARINE CHANNEL CHART I S/D TX RX CHANNEL USE X D 156.025 160.625 Public Correspondence (Marine Operator) X D 156.075 160.675 Public Correspondence (Marine Operator), Port operation, ship movement 156.075 Public Coast: Coast Guard; East Coast: commercial fishing only X D 156.125 160.725 Public Correspondence (Marine Operator), Port operation, ship movement 156.125 Public Coast: Coast Guard; East Coast: commercial fishing only X D 156.175 160.775 Public Correspondence (Marine Operator), Port operation, ship movement 156.175 Port Operation and Commercial. VTS in selected areas. X D 156.225 160.825 Public Correspondence (Marine Operator), Port operation, ship movement 156.225 Public Correspondence (Marine Operator), Port operation, ship movement X D 156.275 160.875 Public Correspondence (Marine Operator), Port operation, ship movement 156.275 Port Opeations X D 156.325 160.925 Public Correspondence (Marine Operator), Port operation, ship movement 156.325 Port Operations X S 156.375 US: Commercial. Used for Bridge-to-bridge com muni-cations in lower Mississippi River. Inter-ship only, Canada: Commercial fishing, S&R X S 156.425 Non-commercial (Recreational) X S 156.475 US: Non-commercial (Recreational), Canada: Commercial fishing only, International: Inter-ship, Port opertions and Ship movement X S 156.525 Digital selective calling (voice communications not allowed) X S 156.575 US, Canada: Non-commercial (Recreational), International: Port opertions and Ship movement X S 156.625 Non-commercial (Inter-ship only) X S 156.675 US: Port Operations, Canada: Commercial fish ing only, International: Inter-ship, Port opertions and Ship movement X S 156.725 US: Port Operations, Canada: Commercial fishing only, International: Inter-ship, Port opertions and Ship movement X S 156.775 Port Operations (Inter-ship only) (1W) X S 156.825 Port Operations (Inter-ship only) (1W) 156.875 Port Operations (Inter-ship only) (1W) X S 156.875 Port Operations (Inter-ship only) X D 156.925 161.525 Public Correspondence (Marine Operator), Port operation, ship-movement 156.925 Non-commercial (Recreational) X D 156.975 161.575 Port operation and Ship movement 156.975 Commercial HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 CH 80 80A 81 81A 81A 82 82A 83 83 83A 84 85 86 87 87A 88 88A VHF MARINE CHANNEL CHART I S/D TX RX CHANNEL USE X D 157.025 161.625 Port operation, ship movement 157.025 Commercial X D 157.075 161.675 Port operation, ship movement 157.075 U.S. Government Only Environmental protection operations. 157.075 Canadian Coast Guard Only X D 157.125 161.725 Public Correspondence (Marine Operator), Port operation, ship movement 157.125 U.S. Government Only, Canadian Coast Guard Only D 157.175 161.775 Canadian Coast Guard Only X D 157.175 161.775 Public Correspondence (Marine Operator) 157.175 U.S. Government Only, Canadian Coast Guard Only X D 157.225 161.825 Public Correspondence (Marine Operator) X D 157.275 161.875 Public Correspondence (Marine Operator) X D 157.325 161.925 Public Correspondence (Marine Operator) X S 157.375 Port operation, ship movement 157.375 Public Correspondence (Marine Operator) X S 157.425 Port operation, ship movement 157.425 Commercial, Inter-ship Only NOTE: Simplex channels, 3A, 21A, 23A, 61A, 64A, 81A, 82A and 83A CANNOT be lawfully used by the general public in U.S.A. waters. HX400 Page 37 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 10. WARRANTY Marine Products Limited Warranty PLEASE NOTE The following “Limited Warranty” is for valid for products that have been purchased in the United States and Canada. For limited Warranty details outside the United States, contact the dealer in your country. STANDARD HORIZON (a division of Vertex Standard) warrants, to the original purchaser only, each new Marine Communications Product (“Product”) manufactured and/or supplied by STANDARD HORIZON against defects in materials and workmanship under normal use and service for a period of time from the date of purchase as follows: Fixed Mount and Portable Transceivers 1 year - if purchased before 01/01/91 3 years - if purchased between 01/01/91 and 01/01/94 3 years Waterproof - if purchased after 01/01/94 Loud hailers 1 year - if purchased before 01/01/91 3 years - if purchased after 01/01/91 Associated Chargers 1 year - if purchased before 01/01/91 3 years - if purchased after 01/01/91 Associated Batteries - 1 year. Note: Batteries will be deemed deflective only if storage capacity drops below 80% of rated capacity or if leakage develops. Associated Accessories - 1 year. Includes: Microphones/Handsets, External Speakers, Antennas, Carrying Accessories, Power Supplies, and Signaling Boards. To receive warranty service, the purchaser must deliver the Product, transportation and insurance prepaid, to STANDARD HORIZON (a division of Vertex Standard), Attention Marine repairs 10900 Walker Street, Cypress, CA 90630. Include proof of purchase indicating model. serial number, and date of purchase. STANDARD HORIZON will return the Product to the purchaser freight prepaid. Products purchased prior to January 1, 1991 will bear the STANDARD HORIZON warranty terms in effect prior to that date. In the event of a defect, malfunction or failure of the Product during the warranty period, STANDARD HORIZON’s liability for any breach of contract or any breach of express or implied warranties in connection with the sale of Products shall be limited solely to repair or replacement, at its option, of the Page 38 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 Product or part(s) therein which, upon examination by STANDARD HORIZON, appear to be defective or not up to factory specifications. STANDARD HORIZON may, at its option, repair or replace parts or subassemblies with new or reconditioned parts and subassemblies. Parts thus repaired or replaced are warranted for the balance of the original applicable warranty. STANDARD HORIZON will not warrant installation, maintenance or service of the Products. In all instances, STANDARD HORIZON’s liability for damages shall not exceed the purchase price of the defective Product. This warranty only extends to Products sold within the 50 States of the United States of America and the District of Columbia. STANDARD HORIZON will pay all labor to repair the product and replacement parts charges incurred in providing the warranty service except where purchaser abuse or other qualifying exceptions exist. The purchaser must pay any transportation expenses incurred in returning the Product to STANDARD HORIZON for service. This limited warranty does not extend to any Product which has been subjected to misuse, neglect, accident, incorrect wiring by anyone other than STANDARD HORIZON, improper installation, or subjected to use in violation of instructions furnished by STANDARD HORIZON, nor does this warranty extend to Products on which the serial number has been removed, defaced, or changed. STANDARD HORIZON cannot be responsible in any way for ancillary equipment not furnished by STANDARD HORIZON which is attached to or used in connection with STANDARD HORIZON’s Products, or for the operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. STANDARD HORIZON disclaims liability for range, coverage, or operation of the Product and ancillary equipment as a whole under this warranty. STANDARD HORIZON reserves the right to make changes or improvements in Products, during subsequent production, without incurring the obligation to install such changes or improvements on previously manufactured Products. The implied warranties which the law imposes on the sale of this Product are expressly LIMITED, in duration, to the time period specified above. STANDARD HORIZON shall not be liable under any circumstances for consequential damages resulting from the use and operation of this Product, or from the breach of this LIMITED WARRANTY, any implied warranties, or any contract with STANDARD HORIZON. IN CONNECTION WITH THE SALE OF ITS PRODUCTS, STANDARD HORIZON MAKES NO WARRANTIES, EXPRESS OR IMPLIED AS TO THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, EXCEPT AS EXPRESSLY SET FORTH HEREIN. HX400 Page 39 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above limitations or exclusions may not apply. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. ONLY PRODUCTS SOLD ON OR AFTER JANUARY 1, 1991 ARE COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY. ON-LINE WARRANTY REGISTRATION THANK YOU for purchasing a Standard Horizon products! We are confident your new radio will serve your needs for many years! Please visit www.standardhorizon.com to register the HX400 Marine VHF. It should be noted that visiting the Web site from time to time may be beneficial to you, as new products are released they will appear on the STANDARD HORIZON Web site. Also a statement regarding product support should be added to the manual. Product Support Inquiries If you have any questions or comments regarding the use of the HX400, you can visit the STANDARD HORIZON Web site to send an E-Mail or contact the Product Support team at (800) 767-2450 M-F 7:00AM to 5:00PM PST. In addition to the warranty, STANDARD HORIZON includes a lifetime “flat rate” and “customer loyalty” programs to provide service after the warranty period has expired. If you wish to obtain the flat rate price for out-of-warranty repair, you must include the information on the Owner’s Record with the unit when you return it to your Dealer or to STANDARD HORIZON. Lifetime Flat Rate Service Program: For the original Owner only, for the lifetime of the unit, STANDARD HORIZON will repair the unit to original specifications. Note: The flat rate amount is payable by the Owner only if STANDARD HORIZON or the STANDARD HORIZON Dealer determines that a repair is needed. After the repair, a 90-day warranty will be in effect from the date of return of the unit to the Owner. This service program is not available for equipment which has failed as a result of neglect, accident, breakage, misuse, improper installation or modification, or water damage (depending on the product). Page 40 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 11. INSTALLATION OF OPTION 11.1 FBA-42 ALKALINE BATTERY TRAY FBA-42 is a battery tray that holds six AA size Alkaline batteries and is used with the HX400 transceiver. When the FBA-42 is installed into the HX400 the radio can withstand immersion in water up to 1.5 m (about 5Ft) for 30 minutes. 1. On the FBA-42, remove the battery tray cover. Due to the battery tray water proof characteristics, it may be difficult to remove the battery tray cover, put a coin to the edge of the battery compartment ( ) then pry open the battery tray cover. 2. Slide the six AA size Alkaline batteries into the FBA-42 Battery Tray with the Negative (–) side of the batteries touching the spring connections inside the FBA-42 Battery Tray. 3. Attach the battery cover to the FBA-42 Battery Tray while being careful so that o-ring is not twisted. 4. Insert the FBA-42 Battery Tray into the battery compartment on the back of the HX400 transceiver, then push the bottom side of the FBA-42 Battery Tray until the Battery Tray locks with the Battery Pack Latch. HX400 Page 41 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 12. SPECIFICATIONS Performance specifications are nominal, unless otherwise indicated, and are subject to change without notice. 12.1 GENERAL Frequency Ranges: Channel Spacing: Frequency Stability: Emission Type: Antenna Impedance: Supply Voltage: Current Consumption: Operating Temperature: Battery Type and capacity: Waterproof Rating: Case Size (W x H x D): Weight (Approx.): 156.025 MHz - 163.275 MHz (Marine Band + WX Band) 134.000 MHz - 174.000 MHz (LMR Band) 25 kHz / 12.5 kHz ±2.5 ppm (–30 °C to +60 °C) 16K0G3E (Marine Band) 16K0F3E (LMR Band: Wide) 11K0F3E (LMR Band: Narrow) 50 7.4V DC, Negative Ground (Battery Terminal) 320 mA (Receive, Typical at AF MAX.) 50 mA (Standby) 1.6 A / 0.8 A (TX: 5 W / 1W) –30 °C to +60 °C Lithium-Ion, 2400 mAh JIS-8 / IPX8 (1.5 m (about 5Ft) for 30 minutes) 2.24” x 5.24” x 1.57” (57 x 133 x 40 mm) w/o knob & antenna 12.3 oz (350 g) w/FNB-115LI, Belt Clip, & Antenna 12.2 TRANSMITTER RF Power Output: Modulation Type: Maximum Deviation: Spurious Emission: Microphone Impedance: Page 42 5 W / 1 W (@7.4 V ) Variable Reactance ±5.0 kHz (Wide) / ±2.5 kHz (Narrow) –36 dBm (<1 GHz), –30 dBm (>1 GHz) 2 k HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 12.3 RECEIVER Circuit Type: Intermediate Frequencies: Adjacent Channel Selectivity: Intermodulation: Sensitivity: Selectivity (Wide): Selectivity (Narrow): AF Output (Internal SP): AF Output (External SP): Double-Conversion Superheterodyne 1st: 67.65 MHz, 2nd: 450 kHz 70 dB typical (Wide), 60 dB typical (Narrow) 68 dB typical –6 dBμV (0.25 μV) for 12 dB SINAD 12 kHz / 25 kHz (–6 dB / –60 dB) 6 kHz / 18 kHz (–6 dB / –60 dB) 700 mW @16 for 10 % THD (@7.4 V) 350 mW @8 for 10 % THD (@7.4 V) Measured in accordance with TIA/EIA-603. HX400 Page 43 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 FCC AND CANADA RADIO LICENSE INFORMATION Standard Horizon radios comply with the Federal Communication Commission (FCC) and Industry-Canada requirements that regulate the Maritime Radio Service. MARITIME STATION LICENSE An FCC ship station license is no longer required for any vessel traveling in U.S. waters which uses a VHF marine radio, RADAR or EPIRB, and which is not required to carry radio equipment. However, any vessel required to carry a marine radio on an international voyage, carrying a HF single side band radiotelephone or marine satellite terminal. FCC license forms, including applications for ship (605) and land station licenses can be downloaded via the Internet at www.fcc.gov/Forms/Form605/605.html. To obtain a form from the FCC, call (888) 225-5322. MARINE RADIO CALL SIGN Currently the FCC does not require recreational boaters to have a Ship Radio Station License. The USCG recommends the boats registration number and the state to be used. CANADIAN SHIP STATION LICENSING You may need a license when traveling in Canada. If you do need a license contact their nearest field office or regional office or write: Industry Canada Radio Regulatory Branch Attn: DOSP 300 Slater Street Ottawa, Ontario Canada, KIA 0C8 FCC/INDUSTRY CANADA INFORMATION The following data pertaining to the transceiver is necessary to fill out the license application. FCC Type Accepted: ........................................................................... Part 80 Output Power with FNB-115LI: ...................................... 1.0/5.0 W (Low/High) Emission: ................................................................. 16K0G3E (Marine Band) 16K0F3E, 11K0F3E (LMR Band) Frequency Range: ............................. 156.025 to 163.275MHz (Marine Band) 134.000 to 174.000 MHz (LMR Band) FCC Type Number: .................................................................. K6630393X20 Industry Canada Type Approval: ........................................... 511B-30393X20 Page 44 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 MEMO HX400 Page 45 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 MEMO Page 46 HX400 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference. Part 15.21: Changes or modifications to this device not expressly approved by Vertex Standard could void the User’s authorization to operate this device. HX400 Page 47 Vertex Standard Co., Ltd. FCC ID:K6630393X20 / IC: 511B-30393X20 Marine Division of VERTEX STANDARD US Headquarters 10900 Walker Street, Cypress, CA 90630, U.S.A. Page 48 Copyright 2010 VERTEX STANDARD CO., LTD. All rights reserved. No portion of this manual may be reproduced without the permission of VERTEX STANDARD CO., LTD. Printed in China HX400 Vertex Standard Co., Ltd.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 9.4.0 (Windows) Creator Tool : PageMaker 7.0J Modify Date : 2010:11:11 13:15:12+09:00 Create Date : 2010:11:11 12:52:44+09:00 Metadata Date : 2010:11:11 13:15:12+09:00 Format : application/pdf Title : HX400.pmd Creator : yohtaki Document ID : uuid:b0ffca8a-5c96-42c7-bb81-65024ac122e5 Instance ID : uuid:2934f5e7-7c19-434e-8b26-6e0ec1578087 Has XFA : No Page Count : 48 Author : yohtakiEXIF Metadata provided by EXIF.tools