Yamaha Dante Controller V4.1.0.x Release Notes AUD RNO 4.1.0.x V1.0

User Manual: Yamaha Dante Controller V4.1.0.x Release Notes

Open the PDF directly: View PDF PDF.
Page Count: 3

Dante Controller v4.1.0.5-v1.0 Release Notes _________
Dante Controller v4.1.0.5(Windows)
Release Notes
Software version: 4.1.0.5 for Windows
Document version: 1.0
17th April 2018
AUD-RNO-Dante_Controller_v4.1.0.5-v1.0
Software Licensing Notice
Audinate distributes products which are covered by
Audinate license agreements and third-party
agreements.
For further information and to access copies of each of these licenses.
Please visit our website: www.audinate.com/software-licensing-notice
Contacts
Australia: tel. +61 2 8090 1000
USA: tel. +1 503 224 2998
Enquiries: info@audinate.com
Please visit www.audinate.com for further contact information.
1. Release Information
1.1. Release Summary
Dante Controller v4.1.0.5 for Windows introduces the 'Controls' tab for supported Dante adapter
devices.
1.2. Release Contents
Item
Version
Description / Location
Dante Controller
Windows Installer
DanteController-4.1.0.5_windows.exe
Installer for Windows
This release note
AUD-RNO-Dante_Controller_4.1.0.5-v1.0.pdf
Dante Controller v4.1.0.5-v1.0 Release Notes _________
1.3. Supported Platform
Platform
Versions
Windows
Windows 7 (SP1 and above)
Windows 8.1
Windows 10
1.4. New Feature since v3.5.3.x
• Device View 'Controls' tab: For supported Dante adapter devices, the new Controls tab in Device
View allows you to configure audio settings specific to the device type (for example, input gain or
output level).
• 'Codec' is now a supported Preset parameter: For supported devices, the codec parameter
represents the settings applied in the Controls tab.
See the Dante Controller user guide for more information about new features.
1.5. Known Issues
• MIL-2928: Sometimes for enrolled DVS devices, in the Device View > Device Config tab, the sample
rate and encoding drop-down menus can erroneously show a message indicating that the selected
option is not valid. Workaround: Refresh the Device Config view.
• MIL-3936: For enrolled legacy devices, it is possible to apply sample rate pull-up using the Presets
function. Workaround: Disassociate the device, then remove the pull-up from the device using the
Device Config tab.
• MIL-3932: For enrolled devices, the Clear Config button (in Device View > Device Config) is
erroneously enabled (but will not perform the function).
• DC-637: Presets cannot be loaded from a folder with a hash character (#) in the folder name.
• DC-640: When viewing device enrolled in a Dante domain, The Ctrl+E shortcut causes all devices to
disappear from Dante Controller. Using the shortcut again restores the devices.
• MIL-4416: For Dante adapter devices that are enrolled in a domain, audio settings in the Device
View 'Controls' tab cannot be used. Workaround: Un-enroll the device before making changes to
the Controls tab.
1.6. Bug fixed since v3.5.3.x
• MIL-3114: Fixed a bug that could prevent devices appearing in Dante Controller after being
renamed.
• DC-622: Using the 'Show Hidden Devices' feature with devices that use private custom encodings
also exposed channels that cannot typically be used for audio routing in Dante Controller. This has
been fixed.
Dante Controller v4.1.0.5-v1.0 Release Notes _________
1.7. Installing or Updating Dante Controller
To install Dante Controller you will need to be logged on with administrator privileges from both
Windows and Mac Systems.
1.7.1 Windows
Note: You do not need to uninstalled previous version before v4.1.0.x
To install Dante Controller on Windows:
1. Ensure you are logged on to your computer as an administrator.
2. Navigate to and double click the downloaded ‘Dante Controller-4.1.0.5_windows.exe’ installer
file.
3. Read the license agreement. If you agree to the terms, select the ‘I agree’ check box and click
install.
4. If you do not agree to the terms, click Close.
5. Confirm / acknowledge any Windows security prompts that are displayed.

Navigation menu