Yamaha CLP 175 Owner's Manual CLP175E1
Yamaha Corporation CLP-175 Owner's Manual clp175e1 Yamaha Corporation - CLP-175 - Owner's Manual
Yamaha Corporation CLP-175 Owner's Manual clp175e1 Yamaha Corporation - CLP-175 - Owner's Manual
User Manual: Yamaha CLP-175 Owner's Manual
Open the PDF directly: View PDF
Page Count: 124 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Introduction
- Basic Operation
- Panel Controls and Terminals
- Listening to the Demonstration Tunes
- Listening to 50 Piano Preset Songs
- Selecting and Playing Voices
- Selecting Voices
- Using the pedals
- Adding variation to the sound [BRILLIANCE]/[REVERB]/[CHORUS]
- To enhance the acoustic realism of the sound ...[iAFC (Instrumental Active Field Control)]
- Combining two voices (Dual mode)
- Splitting the keyboard range and playing two different voices (Split mode)
- Using the metronome
- Recording Your Performance
- Saving Recorded Songs and Handling the Files...[FILE]
- Clavinova memory
- Basic file operation
- Saving recorded or other songs to Clavinova Storage memory...[SaveToMemory]
- Saving recorded or other songs to floppy disk...[SaveToDisk]
- Deleting songs in Clavinova Storage memory or a floppy disk...[DeleteSong]
- Renaming a song...[RenameSong]
- Copying data from one floppy disk to another...[CopyDisk]
- Formatting a floppy disk...[FormatDisk]
- Automatically open a song when the disk is inserted [FDSongAutoOpen]
- Changing the type of characters on screen...[CharacterCode]
- Playing Back Recorded Songs and Commercially-available Music Data
- Connections
- Detailed Settings
- Detailed Settings
- Detailed settings for recording and playback [SONG SETTING]
- Correcting note timing [Quantize]
- Specifying whether playback starts immediately along with the first voicing [QuickPlay]
- Auditioning the channels [ChannelListen]
- Deleting data from each channel [ChannelClear]
- Specifying the range and playing back repeatedly [FromToRepeat]
- Playing back the phrase specified by the phrase number [PhraseMark]
- Playing back a song repeatedly [SongRepeat]
- Detailed settings for the metronome METRONOME [SETTING]
- Detailed settings for the voices [VOICE SETTING]
- Setting the octave [Octave]*
- Setting the volume level [Volume]*
- Setting the position of right and left channels [Pan]*
- Make fine adjustments to the pitch (only in Dual mode) [Detune]
- Selecting the reverb type [ReverbType]
- Setting the reverb depth [ReverbSend]*
- Selecting the chorus type [Chorus Type]
- Setting the chorus depth [ChorusSend]*
- Setting the chorus on/off [ChorusOnOff]
- Selecting the DSP type* [DSP Type (DSP)]
- Setting the speed of the vibraphone vibrato effect* [VibeRotorSpeed(RotorSpeed)]
- Turning the vibraphone vibrato effect on/off* [VibeRotorOnOff (RotorOnOff)]
- Setting the rotation speed of the rotary speaker* [RotarySpeed (Rot.Speed)]
- Adjusting the depth of the DSP effect* [DSPDepth]
- Adjusting the brightness of the sound* [Brightness]
- Adjusting the resonance effect* [HarmonicContent (Harmonic)]
- Adjusting the low-range frequency of the equalizer* [EQLowFreq. (EQ L.Freq)]
- Adjusting the low-range gain (amount of boost/cut) of the equalizer* [EQLowGain]
- Adjusting the high-range frequency of the equalizer* [EQHighFreq. (EQ H.Freq)]
- Adjusting the high-range gain (amount of boost/cut) of the equalizer* [EQHighGain]
- Setting the touch sensitivity [TouchSense]*
- Setting the right pedal function [RPedal]
- Setting the center pedal function [MPedal]
- Setting the left pedal function [LPedal]
- Setting the auxiliary pedal function [AuxPedal]
- Detailed settings for iAFC [iAFC SETTING]
- MIDI [MIDI SETTING]
- About MIDI
- Setting the MIDI transmit channel [MidiOutChannel]
- Setting the MIDI receive channel [MidiInChannel]
- Setting Local control on/off [LocalControl]
- Selecting performance from the keyboard or song data for MIDI transmission [MidiOutSelect]
- Selecting a type of data received via MIDI [ReceiveParameter]
- Selecting a type of data transmitted via MIDI [TransmitParameter]
- Transmitting the initial settings on the panel [InitialSetup]
- Executing voice data bulk dump [VoiceBulkDump]
- Other settings
- Selecting a touch response [TouchResponse]
- Fine tuning the pitch [Tune]
- Selecting a tuning curve for a piano voice [PianoTuningCurve]
- Selecting a scale [Scale]
- Specifying the Split Point [SplitPoint]
- Changing the key [Transpose]
- Adjusting the depth of the Soft pedal [SoftPedalDepth]
- Depth of string resonance [StringResonanceDepth]
- Depth of sustain sampling for the damper pedal [SustainSamplingDepth]
- Specify the volume of the key- off sound [KeyOffSamplingDepth]
- Selecting a pedal function for vibraphone [VibraphonePedalMode]
- Assign the SONG [START/ STOP] function to the pedal [PedalStart/Stop]
- Selecting a type of auxiliary pedal [AuxPedalType]
- Setting the point at which the damper pedal starts to affect the sound [HalfPedalPoint]
- Pitch bend range [PitchBendRange]
- Switch the speaker on/off [Speaker]
- Selecting items saved at shutdown [MemoryBackUp]
- Restoring the normal (default) settings [FactorySet]
- Other method for restoring the normal settings
- Message List
- Message Meaning
- Message Meaning
- Message Meaning
- Message Meaning
- Message Meaning
- Message Meaning
- Questions about Operations and Functions
- The buttons do not respond.
- The sound sustains and does not decay when I press the sostenuto pedal.
- Higher or lower notes does not sound correctly when the transpose or octave setting is made.
- How can I return to the recording or song select screen during song recording or playback?
- The tempo does not change even though I recorded with tempo changes.
- Performance in Dual or Split mode is not recorded. Track data is lost unexpectedly.
- What type of data is recorded?
- I cannot change the key signature in the song after recording.
- How much data can I record?
- The on/off setting of the pedal connected to the AUX PEDAL jack is reversed.
- The song title is not correct.
- What is the difference between “TouchSense” and “TouchResponse” MIDI data?
- Appendix