Yamaha DTX V2 Version 2.0 Owner's Manual DTXv2E1
Yamaha Corporation DTX Version 2.0 Owner's Manual dtxv2e1 Yamaha Corporation - DTX Version 2.0 - Owner's Manual
Yamaha Corporation DTX Version 2.0 Owner's Manual dtxv2e1 Yamaha Corporation - DTX Version 2.0 - Owner's Manual
User Manual: Yamaha DTX Version 2.0 Owner's Manual
Open the PDF directly: View PDF 
Page Count: 174 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Controls and Functions
- Setting Up
- Getting Started
- Feature Reference
- Drum Kit Play Mode
- Drum Kit Trigger Edit Mode
- Entering the Drum Kit Trigger Edit Mode
- Drum Kit Trigger Edit Mode (Page structure and operation)
- 1 Kit Name (drum kit name)
- 2 PAD Type
- 3 Auto Set
- 4 PAD Gain
- 5 LevelRng (level range)
- 6 VelRange (velocity range)
- 7 VelCurve (velocity curve)
- 8 Self Rej (self rejection)
- 9 Reject (rejection)
- 10 Spec Rej (specific rejection)
- 11 Note= (note numbers settings)
- 12 Note= (gate time)
- 13 Note= (MIDI channel)
- 14 Key On
- 15 VelXFade (velocity cross-fade)
- 16 RIMKeyOn
- 17 RIM Vel (RIM velocity)
- 18 PAD Func (pad function)
- 19 FS Func (FS function)
- 20 FS MIDI (FS MIDI channel)
- 21 FS HHcls (FS hi-hat control)
- 22 FC Func (hi-hat control function)
- 23 FC MIDI (hi-hat control channel)
- 24 FC Sens (hi-hat control sensitivity)
- 25 HH Ctrl (hi-hat control)
- 26 In 9 to 10 (input 9 to 10)
- 27 In 11 to 12 (input 11 to 12)
- 28 Copy INP (copy input)
- 29 Copy TRG (copy trigger)
- 30 Edit (edit recall)
- 31 SetChord= (setting the note number by chord)
- Drum Kit Voice Edit Mode
- Entering Drum Kit Voice Edit mode
- Drum Kit Voice Edit Mode (Page structure and operation)
- 1 VCE (voice)
- 2 Volume
- 3 Pan
- 4 Pitch
- 5 Rev send (send reverb)
- 6 Modify
- 7 Filter
- 8 Decay
- 9 Key mode
- 10 AlterGrp (alternate group)
- 11 Key Off
- 12 Out Port
- 13 REV Rtn (reverb return)
- 14 REV Type (reverb type)
- 15 REV Time (reverb time)
- 16 PC Ch= (transmit program change)
- 17 BK Ch= (transmit bank select)
- 18 CC Ch= (transmit control change: volume)
- 19 CC Ch= (transmit control change: pan)
- 20 CC Ch= (transmit control change)
- 21 RootNote
- Chain Play Mode
- Chain Edit Mode
- Store Mode
- Pattern Play Mode
- Pattern Record Mode
- Pattern Job Mode
- Song Play Mode
- Song Record Mode
- Song Job Mode
- Utility Mode
- Entering Utility Mode
- The Utility Mode (page structure and operation)
- 1 SYSTEM
- 2 EditMode
- 3 LinkMode
- 4 Lrn Mode (learn mode)
- 5 SldrMode (slider mode)
- 6 Bypass
- 7 JumpRcnt (jump to recent page)
- 8 FCoffset
- 9 Ma to Aux (main output to auxiliary output)
- 10 Inc Func (increase function)
- 11 Dec Func (decrease function)
- 12 MIDI
- 13 DeviceNo (device number)
- 14 Receive SysX (receiving system exclusive data)
- 15 Receive PC (receiving program change data)
- 16 RecvCh10 All (receiving MIDI channel message through channel 10)
- 17 RecvCh10 PC (receive program change through channel 10)
- 18 SendHH (send hi-hat control change)
- 19 LocalCtl (local control)
- 20 DumpTime
- 21 MergeOut
- 22 Dump Out (bulk data send)
- 23 P/C->KIT (program change table)
- 24 EQ (equalizer)
- 25 Lo Mi Hi (gain)
- 26 Lo Freq (low frequency)
- 27 Mid Freq (mid frequency)
- 28 Hi Freq (high frequency)
- 29 SEQ (sequencer)
- 30 Click Hi
- 31 Click Mid
- 32 Click Lo
- 33 ClickOut
- 34 PlyClick (play click)
- 35 Tempo
- 36 Count
- 37 GrvCheck (groove check)
- 38 Break TB (break top/bottom)
- 39 MIDIctrl (MIDI control)
- 40 SyncMode (synchronization mode)
- 41 MULTI (multi-timbre)
- 42 MastTune (master tune)
- 43 Program
- 44 Volume
- 45 Pan
- 46 Pitch
- 47 Rev Send (Reverb Send)
- Appendix