Yamaha Dante MY16 AUD2 Data Sheet (Dante AUD2) Datasheet
User Manual: Yamaha Data Sheet (Dante-MY16-AUD2)
Open the PDF directly: View PDF 
.
Page Count: 4
Technical Data Sheet 1/4
Dante Interface Card Dante-MY16-AUD2
Overview
Dante-MY16-AUD2 is an optional Dante network interface card for
compatible Yamaha digital mixing consoles and signal processors.
It can give your system additional 16 Dante inputs and outputs.
Features
• Supports 44.1 and 88.2kHz sample rates, in addition to the previously-supported 48 and 96kHz sample rates.
• Sample rate pull-up/down can be used to synchronise audio with video that has undergone frame rate conversion.
• Dante-MY16-AUD2 cards can be daisy chained together via the secondary Ethernet port.
• Dante-MY16-AUD2 can be PIN-locked and unlocked using Dante Controller.
• 2 x RJ-45 connectors for Dante I/O, 1 x D-sub 9 pin connector for RS232-C.
• Latency can be selected from five preset values: 0.25 ms, 0.5 ms, 1.0 ms, 2.0 ms, or 5.0 ms.
• More than 16 audio channels can be transferred when used with multiple Dante-MY16-AUD2 cards.
• Automatic discovery and setup for network devices. Devices names can be specified as required.
• Allows direct PC or Mac audio input and output without the need for an audio interface.
• Dimensions: 120mm x 40mm x 176mm (4.7" x 1.6" x 6.9")
Technical Data Sheet 2/4
Dante Interface Card Dante-MY16-AUD2
General Specifications
Audio Channels 16IN / 16OUT
Sample Rates 44.1kHz, 48kHz, 88.2kHz and 96kHz
Sample Rate Pull-up/down +4.1667, +0.1, -0.1, and -4.0 %
Sample Bit-depth 16, 24 or 32-bit PCM
Network 2 x Gigabit (1000Mbps) Ethernet RJ45 connectors
Redundancy Glitch-free Dante audio redundancy using dual Ethernet networks (redundant mode)
Daisy Chaining Daisy chain multiple Dante-MY16-AUD2 cards together (switched mode)
HA Remote Support for HA Remote capable Yamaha products
Expandable Install up to four Dante-MY16-AUD2 cards in available MY16-compatible slots for up to 64 x 64 audio channels
Compatible Yamaha Equipments
Digital Mixers CS-R10, DSP-R10, RPio622, CL5/3/1, QL5/1, PM5D, DSP5D, M7CL, LS9, DM2000, DM1000, 02R96, 01V96, 01V96i
Interfaces RSio64-D
Processors MRX7-D, MTX5-D, DME24N, DME64N
Power Amps TX4n, TX5n, TX6n
Specifications
Technical Data Sheet 4/4
Dante Interface Card Dante-MY16-AUD2
*All information subject to change without notice.
*All trademarks and registered trademarks are property of their respective owners.
Created in March, 2017
Architectural and Engineering Specifications
The Dante-MY16-AUD2 shall be an optional Dante network interface card for compatible Yamaha digital mixing consoles and signal processors.
It shall provide 16 bidirectional audio channels (eight bidirectional channels at 96 kHz) and full Dante network audio redundancy over Gigabit
Ethernet. Two RJ45 connectors shall be provided for network connection. Dimensions shall be 120 (W) x 40 (H) x 176 (D) mm.
