Yamaha HTR 5065/HTR 4065 Easy Setup Guide 5065 Esg U

User Manual: Yamaha HTR-5065/HTR-4065 Easy Setup Guide

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

HTR-5065_4065_esg_U.fm Page 1 Monday, January 23, 2012 2:36 PM

1 Preparation
AV Receiver

Accessories
Check that the following accessories are supplied with the product.
Remote control

Easy Setup Guide

Insert the batteries the right way round.

AM antenna

English

To reduce the impact on natural resources, the Owner’s Manual for this product is
supplied on CD-ROM. For more information about this product, refer to the
Owner’s Manual on the supplied CD-ROM.
PDF versions of this guide and “Owner’s Manual” can be downloaded from the
following website.
http://download.yamaha.com/
[For U.S. customers only]
Visit the following website for additional information, FAQ’s, downloads such as
“Owner’s Manual” and product updates.
http://usa.yamaha.com/support/

Black process 45.0° 240.0 LPI

FM antenna

YPAO microphone

*The supplied FM antenna
varies depending on the
region of purchase.

CD-ROM
(Owner’s Manual)

This document explains how to set up a 5.1- or 7.1-channel system
(HTR-5065 only) and play back surround sound from a BD/DVD on the unit.

Batteries
(AAA, R03, UM-4) (x2)

Safety Brochure

Easy Setup Guide

• The illustrations of the main unit and remote control used in this guide are of the HTR-5065 (U.S.A.
model), unless otherwise specified.

Cables required for connections
The following cables (not supplied) are required to build the system described in this
document.
• Speaker cables (depending on the number of speakers)
• HDMI cable (x2)
• Audio pin cable (x1)
• Digital optical cable (x1) (not required if your TV supports ARC [Audio Return Channel])

HTR-5065_4065_esg_U.fm Page 2 Monday, January 23, 2012 2:36 PM

2 Placing speakers
Set up the speakers in the room using the following diagram as a reference.
For information on other speaker systems, refer to “Owner’s Manual”.

5.1-channel system

7.1-channel system
(HTR-5065 only)

10° to 30°

30 cm (1 ft) or more

5
10° to 30°

10° to 30°

1 Front speaker (L)
2 Front speaker (R)
3 Center speaker
4 Surround speaker (L)
5 Surround speaker (R)
6 Surround back speaker (L)
7 Surround back speaker (R)
9 Subwoofer

Black process 45.0° 240.0 LPI

HTR-5065_4065_esg_U.fm Page 3 Monday, January 23, 2012 2:36 PM

3 Connecting speakers/subwoofer
• (U.S.A. model only)
Under its default settings, the unit is configured for 8-ohm
speakers. When connecting 6-ohm speakers, set the unit’s
speaker impedance to “6 Ω MIN”. For details, see “Setting the
speaker impedance” in “Owner’s Manual”.

Connect the front speakers (1/2)
to the FRONT (//\) terminals.

Connect the center speaker (3) to the
CENTER terminal.

The unit (rear)

• (Except for U.S.A. model)
Use speakers with an impedance of at least 6 Ω.

The unit (rear)
SPEAKERS

SPEAKERS

PB
FRONT

• Use a subwoofer equipped with built-in amplifier.

CENTER

SURROUND

FRONT

• Before connecting the speakers, remove the unit’s power cable
from the AC wall outlet and turn off the subwoofer.
• Ensure that the core wires of the speaker cable do not touch
each other or come into contact with the unit’s metal areas. This
may damage the unit or the speakers. If the speaker cables
short circuit, “Check SP Wires” will appear on the front display
when the unit is turned on.

CENTER

SURROUND

OR OUT

SUBWOOFER

■ Connecting speaker cables
Speaker cables have two wires. One is for connecting the
negative (–) terminals of the unit and the speaker, and the
other is for the positive (+) terminals. If the wires are
colored to prevent confusion, connect the black wire to
the negative and the other wire to the positive terminals.
a Remove approximately 10
mm (3/8”) of insulation
from the ends of the
speaker cable and twist
the bare wires of the cable
firmly together.

+ (red)

FR
ON

a
4

– (black)

b Loosen the speaker terminal.
c Insert the bare wires of the cable into the gap on the side
(upper right or bottom left) of the terminal.
d Tighten the terminal.

Using a banana plug
(U.S.A. and China models
only)
a Tighten the speaker
terminal.

Banana plug

FR
ON
T

b Insert a banana plug into
the end of the terminal.
En

Black process 45.0° 240.0 LPI

HTR-5065_4065_esg_U.fm Page 4 Monday, January 23, 2012 2:36 PM

Connect the surround speakers
(4/5) to the SURROUND (//\)
terminals.

Connect the subwoofer (9) to the
SUBWOOFER jack.

The unit (rear)

Connect the surround back speakers
(6/7) to the SURROUND BACK (//\)
terminals.
The unit (rear)

The unit (rear)
SPEAKERS

SPEAKERS

PB
FRONT

For 7.1-channel system (HTR-5065 only)

CENTER

SURROUND

FRONT

CENTER

FRONT

SURROUND

CENTER

SURROUND

SURROUND BACK/BI AMP
/ZONE B
SINGLE

OR OUT

SUBWOOFER

Audio pin cable

Black process 45.0° 240.0 LPI

5
6

HTR-5065_4065_esg_U.fm Page 5 Monday, January 23, 2012 2:36 PM

4 Connecting external devices

a Connect a BD/DVD player to the unit with an HDMI
cable.
If the BD/DVD player is currently connected to the
TV directly with an HDMI cable, disconnect the
cable from the TV and connect it to this unit.

Audio out
(optical)

HDMI in

HDMI out

HDMI

BD/DVD player
OPTICAL

Connect external devices to the unit.

b Connect a TV to the unit with the other HDMI cable.

HDMI

c
HDMI OUT
jack

c Connect a TV to the unit with a digital optical cable.
This connection is required to play back TV audio
on the unit. This connection is not required if your
TV supports ARC (Audio Return Channel).

HDMI

d Connect the power cable to an AC wall outlet.

HDMI 1 jack
HDMI

HDMI

HDMI OUT

(BD/DVD)

• For information on how to connect radio antennas or other
external devices, see “PREPARATIONS” in “Owner’s Manual”.

HDMI 1

ARC

d
HDMI OUT

HDMI 2

HDMI 1

HDMI 3

HDMI 4

NETWORK

(BD/DVD)

To an AC wall
outlet

ARC

ANTENNA
AM

COMPONENT
VIDEO

SPEAKERS
FRONT

AV 4 (OPTICAL) jack

CENTER

SURROUND

SURROUND BACK/BI AMP
/ZONE B

VIDEO

OPTICAL
(TV)
AV 4

OPTICAL

COAXIAL

OPTICAL

AV 1

AV 2

AV 3

AV 4

Y
MONITOR OUT

( TV )

AV 5

AV 6

AV
OUT

Use the TV remote control to change the
TV input to video from the unit.

SUBWOOFER
AUDIO

• By connecting a TV to the unit with an HDMI cable, you can
configure the unit’s settings with the menu displayed on the TV. In
addition, you can select the on-screen menu language from English
(default), French, German, Spanish, Russian and Chinese. For
details, refer to “Owner’s Manual”. In this guide, illustrations of
English menu screens are used as examples.

The unit (rear)

YPAO MIC

Turn on the unit

Turn on the unit, the TV and the BD/DVD
player.

The connections are complete. Proceed to the next
page to optimize the speaker settings.

SINGLE

Y
COMPONENT
VIDEO

DIRECT

INFO

MEMORY

PRESET

TUNING

VOLUME
SCENE

BD
DVD

PHONES

INPUT

TONE CONTROL

NET

PROGRAM

RADIO

STRAIGHT

SILENT CINEMA

VIDEO AUX

AUDIO

VIDEO

USB

iPod/iPhone/iPad
5V 2.1A

The unit (front)

Black process 45.0° 240.0 LPI

HTR-5065_4065_esg_U.fm Page 6 Monday, January 23, 2012 2:36 PM

5 Optimizing the speaker settings automatically (YPAO)

Connect the YPAO microphone to the
YPAO MIC jack on the front panel.
The following screen appears.

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the
distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as
volume balance and acoustic parameters, to suit your room.

Auto Setup

• During the measuring process, test tones are output at high volume. Ensure that the test
tones do not frighten small children. Also, refrain from using this function at night when it
may be a nuisance to others.

Start

CODE SET

Exit

Press SETUP key
to Start

SOURCE RECEIVER

• During the measuring process, you cannot adjust the volume.

HDMI

• During the measuring process, keep the room as quiet as possible.

• Do not connect headphones.

AUDIO

V-AUX

USB

NET

Power Amp Assign
Basic

• Do not stand between the speakers and the YPAO microphone during the measurement
process (about 3 minutes).
• Move to the corner of the room or leave the room.

B
ZONE

VOL.

TUNER

Preparing for YPAO

PRESET

The unit (front)

INFO

MEMORY

MOVIE

MUSIC

TUNING

ENHANCER

SCENE
BD
DVD

NET

CROSSOVER/
HIGH CUT

RADIO

VOLUME

RETURN

DISPLAY

POP-UP
MENU

MUTE

MODE

MIN

MAX

R
SR

• To cancel the operation, disconnect the YPAO microphone, or
use the cursor keys to select “Exit” and press ENTER, before
starting the measurement.

YPAO microphone
Listening position

SETUP

OPTION

SETUP

TOP
MENU

MAX

SW
C

DIRECT

SLEEP

ENTER

MIN

L
SL

SUR. DECODE STRAIGHT

Turn on the subwoofer and set
the volume to half. If the
crossover frequency is
adjustable, set it to maximum.

VOLUME

[SETUP]:Start

Cursor keys
ENTER

To start the measurement, press SETUP.
The measurement will start in 10 seconds.
The following screen appears on the TV when
the measurement finishes.
Auto Setup
Start

ENT

Exit

Result
3 / 2 / 0.1 ch

TV
INPUT
TV VOL

Measurement
Finished

3.0 / 10.5 m

TV CH

-3.0 / +10.0 dB

MUTE

Ear height

Place the YPAO microphone at your
listening position (same height as your
ears). We recommend the use of a
tripod as a microphone stand. You can
use the tripod screws to fix the
microphone in place.

Black process 45.0° 240.0 LPI

VOL.

Finished

L
SL

SW
C

R
SR

HTR-5065_4065_esg_U.fm Page 7 Monday, January 23, 2012 2:36 PM

If “W-1:Out of Phase” appears
• If any error message (such as E-1) or warning message (such
as W-2) appears, see “Error messages” or “Warning
messages” in “Owner’s Manual”.
• If the warning message “W-1:Out of Phase” appears, see “If
“W-1:Out of Phase” appears”.

Use the cursor keys (e/r) to select
“SAVE” (Save) and press ENTER.

Follow the procedure below to check the speaker
connections.
Depending on the type of speakers or room
environment, this message may appear even if the
speakers are connected correctly.

Auto Setup
Start

Auto Setup

Measurement
Finished

Start
Exit

SAVE

Measurement
Finished
Result

Exit

3 / 2 / 0.1 ch

Result

3.0 / 10.5 m

3 / 2 / 0.1 ch

-3.0 / +10.0 dB

3.0 / 10.5 m

Warning
message

W-1:Out of Phase

-3.0 / +10.0 dB

a Check for the blinking of the front display’s indicator to
identify the problem speaker.
VOL.

>SaveCancel

L
SL

SW
C

Problem speaker (blinks)
R
SR

Disconnect the YPAO microphone from the
unit.

This completes optimization of the speaker settings.
• The YPAO microphone is sensitive to heat, so should not be
placed anywhere where it could be exposed to direct sunlight or
high temperatures (such as on top of AV equipment).

VOL.

W-1:PHASE

L
SL

SW
C

R
SR

b Check the cable connections (+/-) of the problem
speaker.

If the speaker is connected correctly:
You can save the current settings.
Proceed to step 3.
If the speaker is connected incorrectly:
Turn off the unit, reconnect the speaker cable, and then
try YPAO measurement again.

Black process 45.0° 240.0 LPI

HTR-5065_4065_esg_U.fm Page 8 Monday, January 23, 2012 2:36 PM

6 Playing back a BD/DVD
Now let’s play back a BD/DVD.
We recommend playing back multichannel audio
(5.1-channel or more) to feel surround sound produced
by the unit.

Many more features!
1

Press HDMI 1 to select “HDMI 1” as the
input source.
VOL.

HDMI1

CODE SET

L
SL

SW
C

R
SR

SOURCE RECEIVER

HDMI

AUDIO

V-AUX

USB

NET

HDMI 1

2
3

Press STRAIGHT repeatedly to select
“STRAIGHT”.
VOL.

MEMORY

MOVIE

MUSIC

PRESET

STRAIGHT

TUNING

L
SL

SW
C

R
SR

SUR. DECODE STRAIGHT

STRAIGHT
ENHANCER

• When “STRAIGHT” (straight decode) is enabled, each
speaker produces each channel audio signal directly (without
sound field processing).

DIRECT

SLEEP
SCENE
BD
DVD

NET

RADIO

• (HTR-5065 only)
If you play back 5.1-channel audio on the 7.1-channel system,
no sounds will be heard from the surround back speakers.

OPTION

SETUP

VOLUME

ENTER
RETURN

POP-UP
MENU

VOLUME

DISPLAY

TOP
MENU

Press VOLUME to adjust the volume.

MUTE

VOL.

MODE

Volume -30.0dB
1

R
SR

This completes the basic setup procedure.

ENT

If surround sound is not working

TV
INPUT
TV VOL

L
SL

SW
C

Connecting other playback
devices
Connect audio devices (such as CD player),
game consoles, camcorders, and many others.

Selecting the sound mode

B
ZONE

Please refer to “Owner’s Manual” on the supplied
CD-ROM to help you get the most out of the unit.

Start playback on the BD/DVD player.

TUNER

INFO

The unit has various other functions.

TV CH

MUTE

Sound is only being output from the front speakers
during multichannel audio playback
Check the digital audio output setting on the BD/DVD
player.
It may be set to 2-channel output (such as PCM).

Select the desired sound program (CINEMA
DSP) or surround decoder suitable for movies,
music, games, sports programs, and other uses.

Playing back from iPod
By using a USB cable supplied with iPod, you
can enjoy iPod music on the unit.

■ Listening to FM/AM radio
■ Playing back music stored on
a USB storage device
■ Playing back the network
contents
■ Selecting the input source and
favorite settings at once
For more information, see “What you can do
with the unit”.

Black process 45.0° 240.0 LPI

Printed in Malaysia ZA52690

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Modify Date                     : 2012:03:14 11:52:37+09:00
Create Date                     : 2012:01:23 14:42+09:00
Metadata Date                   : 2012:03:14 11:52:37+09:00
Format                          : application/pdf
Document ID                     : uuid:3066b108-098b-4d73-b8c4-ff24f3c99701
Instance ID                     : uuid:25412218-dd42-4904-a36a-984818b9821c
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 8

EXIF Metadata provided by EXIF.tools

Yamaha HTR 5065/HTR 4065 Easy Setup Guide 5065 Esg U

Navigation menu

Versions of this User Manual:

Views

Navigation