Yamaha Htr 5830 Owners Manual 01EN_00_Cau_HTR 5830_U.p65

HTR-5830 to the manual 1ef65e28-0c01-4850-a7b1-4be593c5be5f

2015-01-15

: Yamaha Htr-5830-Owners-Manual yamaha-htr-5830-owners-manual-132526 yamaha pdf

Open the PDF directly: View PDF .
Page Count: 67

Download
Open PDF In Browser	View PDF

HTR-5830
AV Receiver

ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

00_cover_HTR-5830_U.p65

OWNER’S MANUAL
Printed in China

WE59680

12/16/04, 10:38 AM

IMPORTANT SAFETY INSTRUCTIONS
10

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

•

Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
you to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert you to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.

1
2
3
4
5

6
7

Read Instructions – All the safety and operating instructions
should be read before the product is operated.
Retain Instructions – The safety and operating instructions
should be retained for future reference.
Heed Warnings – All warnings on the product and in the
operating instructions should be adhered to.
Follow Instructions – All operating and use instructions
should be followed.
Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Attachments – Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
Water and Moisture – Do not use this product near water –
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool;
and the like.
Accessories – Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
A product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.

Ventilation – Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
Power Sources – This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
products intended to operate from battery power, or other
sources, refer to the operating instructions.
Grounding or Polarization – This product may be equipped
with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be
fatal.
Overloading – Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
Object and Liquid Entry – Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on
the product.
Servicing – Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
Damage Requiring Service – Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into
the product,
c) If the product has been exposed to rain or water,

i
01EN_00_Cau_HTR-5830_U.p65

12/10/04, 0:33 PM

If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation,
e) If the product has been dropped or damaged in any
way, and
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
Replacement Parts – When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or have
the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
Safety Check – Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is in
proper operating condition.
Wall or Ceiling Mounting – The unit should be mounted
to a wall or ceiling only as recommended by the
manufacturer.
Heat – The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.

Outdoor Antenna Grounding – If an outside antenna or
cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA
70, provides information with regard to proper grounding of
the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection
to grounding electrodes, and requirements for the
grounding electrode.
EXAMPLE OF ANTENNA GROUNDING

MAST

ANTENNA
LEAD IN
WIRE

GROUND
CLAMP

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810–20)

ELECTRIC
SERVICE
EQUIPMENT

GROUNDING CONDUCTORS
(NEC SECTION 810–21)
GROUND CLAMPS

Note to CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as practical.

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)

NEC – NATIONAL ELECTRICAL CODE

FCC INFORMATION (for US customers)
1.

IMPORTANT NOTICE : DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved
by Yamaha may void your authority, granted by the
FCC, to use the product.
IMPORTANT : When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
NOTE : This product has been tested and found to
comply with the requirements listed in FCC
Regulations, Part 15 for Class “B” digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and,
if not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If
this product is found to be the source of interference,
which can be determined by turning the unit “OFF” and
“ON”, please try to eliminate the problem by using one
of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon
lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.

ii
01EN_00_Cau_HTR-5830_U.p65

12/10/04, 0:33 PM

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1 To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2 Install this sound system in a well ventilated, cool,
dry, clean place — away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold.
Allow ventilation space of at least 30 cm on the top,
20 cm on the left and right, and 20 cm on the back
of this unit.
3 Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
4 Do not expose this unit to sudden temperature
changes from cold to hot, and do not locate this unit
in a environment with high humidity (i.e. a room with
a humidifier) to prevent condensation inside this unit,
which may cause an electrical shock, fire, damage to
this unit, and/or personal injury.
5 Avoid installing this unit where foreign object may
fall onto this unit and/or this unit may be exposed
to liquid dripping or splashing. On the top of this
unit, do not place:
– Other components, as they may cause damage
and/or discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause
fire, damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall
and liquid may cause electrical shock to the
user and/or damage to this unit.
6 Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation.
If the temperature inside this unit rises, it may
cause fire, damage to this unit, and/or personal
injury.
7 Do not plug in this unit to a wall outlet until all
connections are complete.
8 Do not operate this unit upside-down. It may
overheat, possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cord from the wall
outlet, grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used.
Using this unit with a higher voltage than specified
is dangerous and may cause fire, damage to this
unit, and/or personal injury. YAMAHA will not be
held responsible for any damage resulting from use
of this unit with a voltage other than specified.

13 To prevent damage by lightning, disconnect the power
cord from the wall outlet during an electrical storm.
14 Do not attempt to modify or fix this unit. Contact
qualified YAMAHA service personnel when any
service is needed. The cabinet should never be
opened for any reasons.
15 When not planning to use this unit for long periods
of time (i.e. vacation), disconnect the AC power
plug from the wall outlet.
16 Be sure to read the “TROUBLESHOOTING” section
on common operating errors before concluding that
this unit is faulty.
17 Before moving this unit, press STANDBY/ON to set
this unit in standby mode, and disconnect the AC
power plug from the wall outlet.
18 VOLTAGE SELECTOR (Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this
unit must be set for your local main voltage
BEFORE plugging into the AC main supply.
Voltages are 110V-120V, 220V-240V AC, 50/60 Hz.

This unit is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if this unit itself is turned off. This state is called
standby mode. In this state, this unit is designed to
consume a very small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
IMPORTANT
Please record the serial number of this unit in the
space below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.

We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your equipment
by playing it at a safe level. One that lets the sound come through
loud and clear without annoying blaring or distortion – and, most
importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the
Electronic Industries Association’s Consumer
Electronics Group recommend you to avoid
prolonged exposure from excessive volume levels.

iii
01EN_00_Cau_HTR-5830_U.p65

12/10/04, 0:33 PM

CONTENTS
FEATURES ............................................................. 2
GETTING STARTED ............................................ 3
Supplied accessories .................................................. 3
Installing batteries in the remote control ................... 3

CONTROLS AND FUNCTIONS ......................... 4
Front panel ................................................................ 4
Remote control .......................................................... 6
Front panel display .................................................... 8

CONNECTIONS .................................................... 9

BASIC SYSTEM SETTINGS ............................. 21
Using the basic menu .............................................. 21
Setting the unit to match your speaker system ........ 23
SP LEVEL (Setting speaker output levels) ............. 23

Set menu list ............................................................ 40
Adjusting the items on the set menu ....................... 40
SOUND 1 SPEAKER SET
(speaker mode settings) ....................................... 41
SOUND 2 SP DISTANCE (speaker distance) ........ 43
SOUND 3 LFE LEVEL .......................................... 43
SOUND 4 D. RANGE (dynamic range) ................. 43
SOUND 5 CENTER GEQ
(center graphic equalizer) ................................... 44
SOUND 6 HP TONE CTRL
(headphone tone control) .................................... 44
INPUT 1 I/O ASSIGN
(input/output assignment) ................................... 44
INPUT 2 INPUT MODE (initial input mode) ........ 44
OPTION 1 DISPLAY SET ...................................... 45
OPTION 2 MEM. GUARD (memory guard) ......... 45
OPTION 3 AUDIO MUTE ..................................... 45

ADVANCED SETUP MENU .............................. 46
REMOTE CONTROL FEATURES ................... 47

BASIC
OPERATION

Before connecting components ................................. 9
Connecting video components ................................ 10
Connecting audio components ................................ 12
Connecting the antennas ......................................... 13
Connecting an external decoder .............................. 14
Connecting the speakers .......................................... 15
Connecting the power supply cord .......................... 18
Turning on the power .............................................. 20

SET MENU ........................................................... 40

PREPARATION

INTRODUCTION

ADVANCED OPERATION

INTRODUCTION

Control area ............................................................. 47
Setting remote control codes ................................... 48
Controlling other components ................................. 49

SETTING THE SPEAKER LEVELS ................ 50
Adjusting the speaker levels during playback ......... 50
Using the test tone ................................................... 50

BASIC OPERATION
Input modes and indications .................................... 26
Selecting a sound field program .............................. 27

DIGITAL SOUND FIELD PROCESSING
(DSP) ................................................................. 30
Understanding sound fields ..................................... 30
HiFi DSP programs ................................................. 30

CINEMA DSP ...................................................... 31

ADDITIONAL INFORMATION

ADVANCED
OPERATION

PLAYBACK .......................................................... 24

EDITING SOUND FIELD PARAMETERS ..... 51
Changing parameter settings ................................... 51
Sound field parameter descriptions ......................... 52

TROUBLESHOOTING ....................................... 53
RESETTING THE FACTORY PRESETS ........ 57
GLOSSARY .......................................................... 58
SPECIFICATIONS .............................................. 60

ADDITIONAL
INFORMATION

Sound design of CINEMA DSP .............................. 31
CINEMA DSP Programs ........................................ 31
Sound field effects ................................................... 33

TUNING ................................................................ 34
Presetting stations .................................................... 35
Selecting preset stations .......................................... 37

SLEEP TIMER ..................................................... 38
RECORDING ....................................................... 39

1
01EN_01-08_HTR-5830_U.p65

12/16/04, 10:57 AM

FEATURES
Built-in 5-channel power amplifier
◆ Minimum RMS output power
[U.S.A. and Canada models]
(0.9% THD, 1 kHz, 6 Ω/8 Ω)
Front:
110 W + 110 W
Center:
110 W
Surround:
110 W + 110 W
[Other models]
(0.9% THD, 1 kHz, 6 Ω)
Front:
100 W + 100 W
Center:
100 W
Surround:
100 W + 100 W

Sound field features
◆ Dolby Pro Logic/Dolby Pro Logic II decoder
◆ Dolby Digital/Dolby Digital + Matrix 6.1 Decoder
◆ DTS/DTS + Matrix 6.1 Decoder
◆ CINEMA DSP: Combination of YAMAHA DSP
technology and Dolby Pro Logic, Dolby Digital or
DTS
◆ Virtual CINEMA DSP
◆ SILENT CINEMA ™
Sophisticated AM/FM Tuner
◆ 40-Station random access preset tuning
◆ Automatic preset tuning
◆ Preset station shifting capability (Preset editing)
Other features
◆ 192 kHz/24-bit D/A converter
◆ Set menu for optimizing this unit for your Audio/
Video system
◆ Test tone generator for easier speaker balance
adjustment
◆ 6-channel external decoder input
◆ Optical and coaxial digital audio signal jacks
◆ Sleep timer
◆ Remote control with preset remote control codes

■ About this manual

• y indicates a tip for your operation.
• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases
when the button names differ between the main unit and the remote control, the button name on the remote control is
given in parentheses.
• This manual is printed prior to production. Design and specifications are subject to change in part for the reason of
the improvement in operativity ability, and others. In this case, the product has priority.

Manufactured under license from Dolby Laboratories.

“DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.

“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.

“SILENT CINEMA” is a trademark of YAMAHA
CORPORATION.

2
01EN_01-08_HTR-5830_U.p65

12/10/04, 0:33 PM

GETTING STARTED
INTRODUCTION

Supplied accessories
Please check that you received all of the following parts.
Remote control

Batteries (2)
(AA, R06, UM-3)

Indoor FM antenna
(U.S.A., Canada, China, Asia
and General models)

AM loop antenna

(Europe, U.K., Australia and
Korea models)

SYSTEM

POWER

STANDBY

POWER

MD/CD-R TUNER

DVD

D-TV/CBL

SLEEP

VCR

V-AUX

6CH INPUT

REC
AUDIO
DISC SKIP

CODE SET

AMP

VOLUME

–

MUTE

INPUT

VOL

MUTE
HALL
1
MUSIC
5
/DTS
9

JAZZ

ROCK

TV THTR MOVIE1

ENTERTAINMENT
4
MOVIE2

NIGHT

6.1/5.1

STEREO

+10

ENTER

LEVEL

SET MENU

TITLE

MENU
A/B/C/D/E

–

SELECT

TEST

DISPLAY

RETURN
PRESET/CH

Installing batteries in the remote
control
Insert the batteries in the correct direction by aligning the
+ and – marks on the batteries with the polarity markings
(+ and –) inside the battery compartment.

2
1

■ Notes on batteries

• Change all of the batteries if you notice a decrease in
the operating range of the remote control.
• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline
and manganese batteries) together. Read the packaging
carefully as these different types of batteries may have
the same shape and color.
• If the batteries have leaked, dispose of them
immediately. Avoid touching the leaked material or
letting it come into contact with clothing, etc. Clean the
battery compartment thoroughly before installing new
batteries.
• Do not throw away batteries with general house waste;
dispose of them correctly in accordance with your local
regulations.
If the remote control is without batteries for more than
2 minutes, or if exhausted batteries remain in the
remote control, the contents of the memory may be
cleared. When the memory is cleared, insert new
batteries, set up the remote control code and program
any acquired functions that may have been cleared.

Press the part marked with a
and slide off
the battery compartment cover.

Insert the two batteries supplied (AA, R06,
UM-3) according to the polarity markings on
the inside of the battery compartment.

Slide the cover back on so that it snaps into
place.

3
01EN_01-08_HTR-5830_U.p65

12/10/04, 0:33 PM

CONTROLS AND FUNCTIONS
Front panel
1

2 3

VOLUME

STANDBY
/ON

PRESET/TUNING

FM/AM

A/B/C/D/E

EDIT

PHONES

STEREO

SPEAKERS

PRESET/TUNING

MEMORY

TUNING MODE

SET MENU

MAN'L/AUTO FM

AUTO/MAN'L MONO

PROGRAM

A/B/OFF

INPUT
INPUT MODE

6CH INPUT

EFFECT

TONE CONTROL

BASS/TREBLE

SILENT CINEMA

e rt

1 STANDBY/ON
Turns on this unit or sets it to the standby mode. When
you turn on this unit, you will hear a click and there will
be a 4 to 5-second delay before this unit can reproduce
sound.

Note

5 A/B/C/D/E
Selects preset station groups A to E when the unit is in
tuner mode.
(NEXT)
Selects the set menu mode when the unit is not in tuner
mode.

In standby mode, this unit consumes a small amount of
power in order to receive infrared-signals from the remote
control.

6 Front panel display
Shows information about the operational status of the
unit.

2 PRESET/TUNING
Switches the function of PRESET/TUNING l / h
between selecting a preset station number and tuning (the
colon (:) turns on or off).

7 PRESET/TUNING l / h
Select preset station numbers 1 to 8 when a colon (:) is
displayed in the front panel display.
Select the tuning frequency when a colon (:) is not
displayed in tuner mode.

(EDIT)
This button is also used to exchange the assignment of
two preset stations with each other.
3 Remote control sensor
Receives signals from the remote control.
4 FM/AM
Switches the reception band between FM and AM.

(SET MENU –/+)
Adjust settings on the set menu when the unit is not in
tuner mode.
8 MEMORY (MAN’L/AUTO FM)
Stores a station in the memory.
9 TUNING MODE (AUTO/MAN’L MONO)
Switches the tuning mode between automatic and manual.

4
01EN_01-08_HTR-5830_U.p65

12/10/04, 0:33 PM

CONTROLS AND FUNCTIONS

0 VOLUME
Controls the output level of all audio channels.
This does not affect the OUT (REC) level.

INTRODUCTION

q
PHONES (SILENT CINEMA)
Allows you to enjoy DSP effects when listening with
headphones.
w SPEAKERS A/B/OFF
Selects the set of front speakers connected to the A or B
terminals. To turn off the speakers, press the button
repeatedly and select OFF.
e STEREO (EFFECT)
Switches between normal stereo and DSP effect
reproduction. When you select STEREO, the unit mixes
down all Dolby Digital and DTS signals (except the LFE
channel) as well as those 2-channel signals without effect
sounds to the front left and right speakers.
r TONE CONTROL
Switches between Bass (low-frequency response) control
mode and Treble (high-frequency response) control mode.
t PROGRAM l / h
Use to select sound field programs.
y BASS/TREBLE –/+
Increase or decrease low/high-frequency response when
the unit is in Bass/Treble control mode. The sound
changes 2dB each time you press one of these buttons.
Control range: –10 to +10dB.
u INPUT MODE
Sets the priority for the types of input signals (AUTO,
DTS, ANALOG) received when one component is
connected to two types of input jacks. You cannot set
priority for an audio sources if you have selected 6CH
INPUT as the input source.
i INPUT l / h
Selects the input source you want to listen to or watch.
o 6CH INPUT
Selects the audio source connected to the 6CH INPUT
jacks. This selection takes priority over sources selected
with INPUT (or the input selector buttons on the remote
control).

5
01EN_01-08_HTR-5830_U.p65

12/10/04, 0:33 PM

CONTROLS AND FUNCTIONS

Remote control
This section describes the controls and functions of the
remote control when it is set in AMP mode. Please make
sure to select AMP mode before beginning operation.
See “REMOTE CONTROL FEATURES” on page 47 to
operate other components with this remote control.

1 Infrared emitter
Outputs infrared control signals. Aim this emitter at the
component you want to operate.
2 Input selector buttons
Select the input source and change the control area.
3 Sound field program/Numeric buttons
Use to select sound field programs or input numbers.

SYSTEM

POWER

DVD

STANDBY

POWER

MD/CD-R TUNER

SLEEP

D-TV/CBL

V-AUX

VCR

4 LEVEL
Selects the effect speaker channel to adjust.

5 Cursor buttons u / d / j / i / SELECT
Use to select and adjust sound field program parameters
or SET MENU items.

6 TEST
Outputs the test tone to adjust the speaker levels.

6CH INPUT

REC
AUDIO
DISC SKIP

CODE SET

q
AMP

7 STANDBY
Sets this unit in standby mode.

8 SYSTEM POWER
Turns on the power of the unit.

9 SLEEP
Sets the sleep timer.

VOL

VOLUME

–

MUTE

INPUT
MUTE

HALL

JAZZ

ROCK

MUSIC
5
/DTS
9

TV THTR MOVIE1

6.1/5.1

STEREO

+10

ENTER
SET MENU

TITLE

MENU
A/B/C/D/E

–

SELECT

TEST

DISPLAY

RETURN
PRESET/CH

0 6CH INPUT
Selects the audio source connected to the 6CH INPUT
jacks.

MOVIE2

NIGHT

LEVEL

ENTERTAINMENT

t
y
i

q CODE SET
Use to set up remote control codes (see page 48).
w AMP
Switches control from a previously selected component
by using the input selector buttons to this unit.
e VOLUME +/–
Increases or decreases the volume level.

6
01EN_01-08_HTR-5830_U.p65

12/16/04, 10:57 AM

CONTROLS AND FUNCTIONS

r MUTE
Mutes the sound. Press again to restore the audio output
to the previous volume level.

■ Using the remote control

The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the main unit during operation.

INTRODUCTION

t 6.1/5.1
Switches on or off the Dolby Digital + Matrix 6.1 or DTS
+ Matrix 6.1 decoder.
VOLUME

y STEREO
Switches between normal stereo and DSP effect
reproduction. When you select STEREO the unit mixes
down all Dolby Digital and DTS signals (except the LFE
channel) as well as those 2-channel signals without effect
sounds, to the front left and right speakers.

STANDBY
/ON

PRESET/TUNING

FM/AM

A/B/C/D/E

EDIT

PHONES

SPEAKERS

STEREO

PRESET/TUNING

MEMORY

TUNING MODE

SET MENU

MAN'L/AUTO FM

AUTO/MAN'L MONO

PROGRAM

A/B/OFF

INPUT
INPUT MODE

6CH INPUT

EFFECT

TONE CONTROL

BASS/TREBLE

SILENT CINEMA

30°

Approximately 6 m (20 feet)

SYSYTEM

u NIGHT
Sets the unit in night listening mode.

POWER

STANDBY

POWER

MD/CD-R TUNER

DVD

D-TV/CBL

SLEEP

VCR

V-AUX

6CH INPUT

REC
AUDIO
DISC SKIP

CODE SET

AMP

VOL

VOLUME

–
MUTE

–

INPUT
MUTE

HALL

2
MONO MOVIE

i SET MENU
Selects the set menu mode.

JAZZ

1
TV SPORTS

ROCK
3

ENTERTAINMENT
4

1 - MOVIE THTR - 2
7

/DTS - SELECT MATRIX 6.1 STEREO
9

+10

LEVEL

ENTER
SET MENU

TITLE

MENU
A/B/C/D/E

–

SELECT

TEST

DISPLAY

RETURN
PRESET/CH

■ Handling the remote control

• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
– high humidity such as near a bath
– high temperature such as near a heater or stove
– extremely low temperature
– dusty places

7
01EN_01-08_HTR-5830_U.p65

12/10/04, 0:33 PM

CONTROLS AND FUNCTIONS

Front panel display
1

4
VCR

SILENT CINEMA
MATRIX
VIRTUAL
DIGITAL

DTV/CBL

DVD

MD/CD-R

7
TUNER

PL
PCM

AUTO TUNED STEREO MEMORY MUTE VOLUME

NIGHT
SLEEP

HiFi DSP

~~~~~~~~~~~~~~

SP
AB

V-AUX

u i

ft
dB

L C R
LFE SL SB SR

1 Decoder indicators
When any of this unit’s decoders function, the respective
indicator lights up.

w SP A B indicator
Lights up to indicate which set of front speakers is
selected.

2 SILENT CINEMA indicator
Lights up when headphones are connected and a sound
field program is selected (see page 27).

e NIGHT indicator
Lights up when the unit is set to night listening mode.

3 Headphones indicator
Lights up when headphones are connected to the
headphone jack.
4 Input source indicator
Highlights the current input source with a cursor.
5 Sound field indicator
Light to indicate the active DSP sound fields.
Presence DSP sound field
Listening position
Right surround
DSP sound field

Left surround
DSP sound field

Surround back DSP sound field

6 AUTO indicator
Shows that this unit is in the automatic tuning mode.
7 MUTE indicator
Flashes while the MUTE function is on.
8 VOLUME level indicator
Indicates the volume level.
9 PCM indicator
Lights up when this unit is reproducing PCM (pulse code
modulation) digital audio signals.

r SLEEP indicator
Lights up while the sleep timer is on.
t HiFi DSP indicator
Lights up when you select a HiFi DSP sound field
program.
y CINEMA DSP indicator
Lights up when you select a CINEMA DSP sound field
program.
u TUNED indicator
Lights up when this unit is tuned to a radio station.
i STEREO indicator
Lights up when the unit is receiving a strong signal from
a FM stereo broadcast while the “AUTO” indicator is lit.
o MEMORY indicator
Flashes to show a station can be stored.
p LFE indicator
Lights up when the input signal contains an LFE signal.
a Input channel indicator
The indicators for the appropriate sound channels light up
when a digital signal from a source is played back.

0 VIRTUAL indicator
Lights up when using Virtual CINEMA DSP.
q Multi-information display
Shows the current sound field program name and other
information when adjusting or changing settings.

8
01EN_01-08_HTR-5830_U.p65

12/10/04, 0:33 PM

CONNECTIONS
■ Connecting to digital jacks

Before connecting components

This unit has digital jacks for direct transmission of
digital signals through either a coaxial or fiber optic
cable. You can use the digital jacks to input PCM, Dolby
Digital and DTS bitstreams. Use digital connections if
you wish to enjoy the multi-channel sound track of DVD
material, etc. with DSP effects. Both digital input jacks
are acceptable for 96 kHz sampling digital signals.

CAUTION
Do not connect this unit or other components to the
mains power until all connections between the
components have been completed.

Note
• The OPTICAL jack on this unit conform to the EIA standard.
If you use a fiber optic cable that does not conform to EIA
standard, this unit may not function properly.
Signal flow inside this unit
Output
(MONITOR OUT)

Input
COMPONENT
VIDEO
VIDEO

DIGITAL INPUT jacks
(pages 9 – 12)
6CH INPUT jacks
(page 13)

6CH INPUT

COMPONENT
VIDEO jacks
(page 11)

Video component
jacks (page 10)

AUDIO

Speaker terminals
(page 16)

VIDEO

SPEAKERS

SURROUND
FRONT

TUNER

DVD

COMPONENT VIDEO
Y

DIGITAL
INPUT
CD

DTV
/CBL

SURROUND
SUB
WOOFER

DTV
/CBL

2
1

MONITOR
OUT

DVD

V-AUX

VCR
IN
(PLAY)

DVD

AM
ANT

CENTER

COAXIAL
OPTICAL

OUT

GND

FM
ANT
75Ω
UNBAL.

DTV
/CBL

A
R

FRONT

CLASS 2 WIRING

B
FRONT
R

CENTER

MD
/CD-R
SUB
WOOFER

OUT
(REC)
R

MONITOR
OUT

AUDIO

OUTPUT

Antenna input terminals
(page 13)

Audio component jacks
(page 12)
SUBWOOFER OUTPUT
jack (page 16)

This jack is reserved for factory use.
Do not connect any equipment to this jack.

9
01EN_09-20_HTR-5830_U.p65

12/10/04, 0:33 PM

PREPARATION

• Be sure to connect the left channel (L), right channel
(R), “+” (red) and “–” (black) properly. Some
components require different connection methods and
have different jack names. Refer to the operation
instructions for each component you wish to connect to
this unit.
• After you have completed all connections, check them
again to make sure they are correct.
• The jack names correspond to the names on the input
selector.

CONNECTIONS

■ Connecting another video component

Connecting video components

Connect the video signal output jack on your component
to the VIDEO jack on this unit.
Connect the audio signal output jacks on the component
to the AUDIO jacks on this unit.

■ Connecting a video monitor

Connect the video input jack on your video monitor to the
MONITOR OUT VIDEO jack.

■ Connecting a recording component

■ Connecting a DVD player/digital TV/cable
TV

Connect the audio signal input jacks on your video
component to the AUDIO OUT jacks on this unit. Then
connect the video signal input jack on the video
component to the VIDEO OUT jack on this unit for
picture recording.
Connect the audio signal output jacks on your component
to the AUDIO IN jacks on this unit. Then connect the
video signal output jack on the component to the VIDEO
IN jack on this unit to play a source from your recording
component.

Connect the optical digital audio signal output jack on
your component to the DIGITAL INPUT jack and
connect the video signal output jack on the component to
the VIDEO jack on this unit.

y
• Use the AUDIO jacks on this unit for a video component
which does not have optical digital output jack. However,
multi-channel reproduction cannot be obtained with audio
signals input from the AUDIO jacks. If you wish to enjoy the
surround sound, use q/DTS on the remote control (see page
28).
• You can also connect a video monitor, DVD player, digital TV,
and cable TV to this unit using the COMPONENT VIDEO
connections (see page 11).

DVD player

Notes
• Once you have connected a recording component to this unit,
keep its power turned on while using this unit. If the power is
off, this unit may distort the sound from other components.
• If you connect your video monitor to this unit using a VIDEO
connection, connect your video source components such as a
DVD player or digital TV to this unit using the VIDEO
connections.

TV/digital TV/
cable TV

OPTICAL
OUTPUT

Another video
component

OPTICAL
OUTPUT
L

AUDIO
OUTPUT

AUDIO

6CH INPUT
R

VIDEO
OUTPUT

AUDIO
OUTPUT

VIDEO

FRONT

DVD

SURROUND

DTV
/CBL

SUB
WOOFER

TUNER

COMP
Y

DIGITAL
INPUT

AM
ANT

CENTER
V-AUX

GND

FM
ANT

COAXIAL

OPTICAL

DTV
/CBL

DVD

VCR
IN
(PLAY)

75Ω
UNBAL.

OUT

MD
/CD-R

Video monitor
SUB
WOOFER

OUT
(REC)
R

MONITOR
OUT

V
AUDIO

VIDEO
INPUT

OUTPUT

AUDIO
OUTPUT

AUDIO
INPUT

VIDEO
INPUT

VIDEO
OUTPUT

indicates left analog cables

indicates right analog cables

indicates optical cables
indicates video cables

VCR

10
01EN_09-20_HTR-5830_U.p65

12/10/04, 0:33 PM

CONNECTIONS

■ COMPONENT VIDEO jacks

You can enjoy high-quality pictures by connecting your
video monitor and video source components to this unit
using COMPONENT VIDEO connections.

COMPONENT
VIDEO

Video monitor

Y
PB
PR
COMPONENT VIDEO
Y

MONITOR
OUT

PREPARATION

DVD

DVD player

DTV
/CBL

Digital TV/cable TV

PB
PR

Y
PB

indicates component video cables

Note
• If you connect your video monitor to this unit using a
COMPONENT VIDEO connection, connect your video
source components such as a DVD player or digital TV to this
unit using the VIDEO COMPONENT connections.

11
01EN_09-20_HTR-5830_U.p65

12/10/04, 0:33 PM

CONNECTIONS

Note

Connecting audio components

• Once you have connected a recording component to this unit,
keep its power turned on while using this unit. If the power is
off, this unit may distort the sound from other components.

■ Connecting a CD player

Connect the coaxial digital output jack on your CD player
to the DIGITAL INPUT CD jack on this unit.

y
• Use the AUDIO jacks on this unit to connect to a CD player
that does not have a COAXIAL DIGITAL OUTPUT jack, or
to record from CD players.

■ Connecting a CD recorder or MD
recorder
Connect the input jacks on your CD recorder or MD
recorder to the MD/CD-R OUT (REC) jacks.
Connect the output jacks on your CD recorder or MD
recorder to the MD/CD-R IN (PLAY) jacks to play a
source from your recording component.

AUDIO
OUTPUT

R
6CH INPUT

AUDIO
R

VIDEO
L

FRONT

COAXIAL
OUTPUT

CD player

DIGITAL
INPUT
CD

TUNER

DVD

DTV
/CBL

SURROUND
SUB
WOOFER

CENTER

AM
ANT

V-AUX

GND

FM
ANT

COAXIAL

AUDIO
OUTPUT

OPTICAL

DTV
/CBL

DVD

VCR
IN
(PLAY)

CD recorder or
MD recorder

OUT

SUB
WOOFER

OUT
(REC)
R

AUDIO
INPUT

AUDIO

OUTPUT

indicates left analog cables

indicates right analog cables

indicates coaxial cables

12
01EN_09-20_HTR-5830_U.p65

75Ω
UNBAL.

MD
/CD-R

12/10/04, 0:33 PM

MONITOR
OUT

CONNECTIONS

Connecting the antennas
Both AM and FM indoor antennas are included with this
unit. In general, these antennas should provide sufficient
signal strength.

■ Connecting the AM loop antenna

Set up the AM loop antenna, then connect it
to the terminals on this unit.

Press and hold the tab to insert the AM loop
antenna lead wires into the AM ANT and
GND terminals.

Orient the AM loop antenna for the best
reception.

Connect each antenna correctly to the designated
terminals.
AM loop antenna
(included)

Indoor FM
antenna
(included)

TUNER

AM
ANT
GND

FM
ANT
75Ω
UNBAL.

MONITOR
OUT

Ground (GND terminal)
For maximum safety and minimum
interference, connect the antenna GND
terminal to a good earth ground. A good
earth ground is a metal stake driven into
moist earth.

Notes
• The AM loop antenna should be placed away from this unit.
• The AM loop antenna should always be connected, even if an
outdoor AM antenna is connected to this unit.
• A properly installed outdoor antenna provides clearer
reception than an indoor one. If you experience poor reception
quality, an outdoor antenna may improve the quality. Consult
the nearest authorized YAMAHA dealer or service center
about the outdoor antennas.

13
01EN_09-20_HTR-5830_U.p65

12/10/04, 0:33 PM

PREPARATION

DEO

CONNECTIONS

Connecting an external decoder
This unit is equipped with 6 additional input jacks
(FRONT left and right, CENTER, SURROUND left and
right and SUBWOOFER) for discrete multi-channel input
from a component equipped with a multi-channel decoder
and 6 channel output jacks such as a DVD/Super Audio
CD player.

AUDIO

6CH INPUT
R

VIDEO
L

FRONT

DVD

SURROUND

DTV
/CBL

TUNER
Y

DIGITAL
INPUT
CD

SUB
WOOFER

AM
ANT

CENTER

GND

V-AUX

COAX AL

CENTER

SUBWOOFER

SURROUND

FRONT

DVD/Super Audio CD player

Notes
• When you select 6CH INPUT as the input source, this unit
automatically turns off the digital sound field processor, and
you cannot select sound field programs.
• When headphones are used, only front L/R channels are
output.

14
01EN_09-20_HTR-5830_U.p65

12/10/04, 0:33 PM

CONNECTIONS

Connecting the speakers
■ Speaker placement

30˚

PREPARATION

Subwoofer
The use of a subwoofer, such as the YAMAHA Active
Servo Processing Subwoofer System, is effective not only
for reinforcing bass frequencies from any or all channels,
but also for high fidelity reproduction of the LFE (low frequency effect) channel included in Dolby Digital and
DTS software. The position of the subwoofer is not so
critical, because low bass sounds are not highly
directional. But it is better to place the subwoofer near the
front speakers. Turn it slightly toward the center of the
room to reduce wall reflections.

SR
60˚

80˚

The speaker layout above shows the standard ITU-R
speaker setting. You can use it to enjoy CINEMA DSP,
multi-channel audio sources.

1.8 m (6 ft)

Front speakers (FR and FL)
The front speakers are used for the main source sound
plus effect sounds. Place these speakers an equal distance
from the ideal listening position. The distance of each
speaker from each side of the video monitor should be the
same.
Center speaker (C)
The center speaker is for the center channel sounds
(dialog, vocals, etc.). If for some reason it is not practical
to use a center speaker, you can do without it.
Best results, however, are obtained with the full system.
Align the front face of the center speaker with the front
face of your video monitor. Place the speaker centrally
between the front speakers and as close to the monitor as
possible, such as directly over or under it.
Surround speakers (SR and SL)
The surround speakers are used for effect and surround
sounds. Place these speakers behind your listening
position, facing slightly inwards, about 1.8 m (6 ft) above
the floor.

15
01EN_09-20_HTR-5830_U.p65

12/10/04, 0:33 PM

CONNECTIONS

■ Speaker connections

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are
faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound
will be unnatural and lack bass.

CAUTION
• Use speakers with the specified impedance shown on the rear panel of this unit.
• Before connecting the speakers, make sure that the power of this unit is off.
• Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could
damage this unit and/or speakers.
• Use magnetically shielded speakers. If this type of speakers still creates the interference with the monitor, place
the speakers away from the monitor.

Connecting to the FRONT A SPEAKERS terminals
A speaker cord is actually a pair of insulated cables running side by side. One cable is colored or shaped differently,
perhaps with a stripe, groove or ridges. Connect the striped (grooved, etc.) cable to the “+” (red) terminals on this unit
and your speaker. Connect the plain cable to the “–” (black) terminals.

Remove approximately 10 mm (3/8") of
insulation from the end of each of the
speaker cables.

Twist the exposed wires of the cable
together to prevent short circuits.

Loosen the head of the screw.

Insert one bare wire into the hole in the side
of each terminal.

Tighten the head of the screw to secure the
wire.

10 mm (3/8”)

1
Red: positive (+)
Black: negative (–)

3
5

Banana plug connections
(With the exception of U.K., Europe and Asia models)
First, tighten the knob and then insert the banana plug
connector into the end of the corresponding terminal.

Banana plug

(With the exception of U.K., Europe and Asia models)

Connecting to the FRONT B, CENTER and SURROUND SPEAKERS terminals

Red: positive (+)
Black: negative (–)

3
2

Press and open the tab.

Insert one bare wire into the hole of each
terminal.

Release the tab to secure the wire.

16
01EN_09-20_HTR-5830_U.p65

12/10/04, 0:33 PM

CONNECTIONS

Front A speaker
Right
Left

Surround speaker
Right
Left

5
1

6CH INPUT

AUDIO
R

VIDEO

SPEAKERS

SURROUND
DVD

SURROUND

DTV
/CBL

TUNER
Y

DIGITAL
INPUT
CD

SUB
WOOFER

DTV
/CBL

V-AUX

GND

FM
ANT

DVD

DTV
/CBL

A
R

FRONT

CLASS 2 WIRING

VCR
IN
(PLAY)

DVD

MONITOR
OUT

AM
ANT

CENTER

COAXIAL
OPTICAL

COMPONENT VIDEO

PREPARATION

FRONT

OUT

FRONT

75Ω
UNBAL.

CENTER

MD
/CD-R
SUB
WOOFER

OUT
(REC)
R

MONITOR
OUT

AUDIO

OUTPUT

4
Subwoofer with
built-in amplifier

FRONT SPEAKERS terminals
You can connect up to two speaker systems to these
terminals. When using only one speaker system, connect
it to either of the FRONT A or the FRONT B terminals.

3
Right
Left
Front B speaker

Center
speaker

1
4

SURROUND SPEAKERS terminals
A surround speaker system can be connected to these
terminals.
CENTER SPEAKER terminals
A center speaker can be connected to these terminals.

The diagram shows the speaker layout in the listening
room.
SUBWOOFER jack
When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System,
connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distributed from the
front, center and/or surround channels to this jack in accordance with your SPEAKER SET selections. The LFE (lowfrequency effect) signals generated when Dolby Digital or DTS is decoded are also directed to this jack in accordance
with your SPEAKER SET selections.

Notes
• The cut-off frequency of the SUBWOOFER jack is 90 Hz.
• If you do not use a subwoofer, allocate the signals to the front left and right speakers by changing the setting of “SOUND 1
SPEAKER SET” item “1D BASS” on the set menu to FRONT.
• Use the control on the subwoofer to adjust its volume level. You can also adjust the volume level by using this unit’s remote control
(see “SETTING THE SPEAKER LEVELS” on page 50).

17
01EN_09-20_HTR-5830_U.p65

12/10/04, 0:33 PM

CONNECTIONS

Connecting the power supply cord
VOLTAGE SELECTOR

Power cord

VOLTAGE
SELECTOR

110V-120V

URROUND)
L

220V-240V

(Asia and General models)

■ Connecting the AC power cord
Plug the power cord into an AC wall outlet.

■ VOLTAGE SELECTOR
(Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE
plugging into the AC main supply. Voltages are:
110 V - 120 V/220 V - 240 V AC, 50/60 Hz.

18
01EN_09-20_HTR-5830_U.p65

12/10/04, 0:33 PM

CONNECTIONS

■ IMPEDANCE SELECTOR switch
(U.S.A. and Canada models only)

IMPEDANCE SELECTOR
FRONT A OR B:6ΩMIN./SPEAKER
CENTER
:6ΩMIN./SPEAKER
SURROUND :6ΩMIN./SPEAKER
FRONT A OR B:8ΩMIN./SPEAKER
CENTER
:8ΩMIN./SPEAKER
SURROUND :8ΩMIN./SPEAKER

PREPARATION

CAUTION
Do not change the setting of the IMPEDANCE
SELECTOR switch when the unit power is switched on,
as doing so may damage the unit.
If this unit fails to turn on when STANDBY/ON is
pressed on either the front panel or remote control, the
IMPEDANCE SELECTOR switch may not be fully slid
to either position. If this is the case, slide the switch all
the way to either position when this unit is in standby
mode.
Select the switch position (upper or lower) according to
the impedance of the speakers in your system.

(U.S.A. model)

IMPEDANCE SELECTOR switch

Switch position

Speaker

Upper

FRONT A OR B

The impedance of each speaker must be 6 Ω or higher.

CENTER, SURROUND

The impedance of each speaker must be 6 Ω or higher.

FRONT A OR B

The impedance of each speaker must be 8 Ω or higher.

CENTER, SURROUND

The impedance of each speaker must be 8 Ω or higher.

Lower

Impedance level

19
01EN_09-20_HTR-5830_U.p65

12/16/04, 10:57 AM

CONNECTIONS

Turning on the power
When all connections are complete, turn on the power of
this unit.

1
VOLUME

STANDBY
/ON

PRESET/TUNING

FM/AM

A/B/C/D/E

EDIT

PHONES

SPEAKERS

STEREO

PRESET/TUNING

MEMORY

TUNING MODE

SET MENU

MAN'L/AUTO FM

AUTO/MAN'L MONO

PROGRAM

INPUT

A/B/OFF

INPUT MODE

6CH INPUT

EFFECT

TONE CONTROL

BASS/TREBLE

SILENT CINEMA

SYSTEM

POWER

STANDBY

POWER

MD/CD-R TUNER

DVD

D-TV/CBL

SLEEP

VCR

V-AUX

6CH INPUT

REC
AUDIO
DISC SKIP

CODE SET

AMP

Press STANDBY/ON (or SYSTEM POWER on
the remote control) to turn on the power of
this unit.
SYSTEM

POWER
STANDBY
/ON

Remote control

Front panel

The level of the volume, and then the current sound
field program name appear on the front panel
display.

20
01EN_09-20_HTR-5830_U.p65

12/16/04, 10:57 AM

BASIC SYSTEM SETTINGS
The “BASIC” menu allows you to set some of the basic “SOUND” menu parameters with a minimum of effort. If you
wish to configure the unit more precisely to suit your listening environment, use the more detailed parameters from the
“SOUND” menu instead of those under the “BASIC” menu (see page 40). Altering any parameters in the BASIC menu
will reset all parameters in the “SOUND” menu.

Using the basic menu

AMP

VOL

VOLUME

–

MUTE

INPUT

2 SP LEVEL
Adjusts the output levels of the speakers.
Refer to “SP LEVEL” on page 23 for more
information.

MUTE
HALL
1
MUSIC
5
/DTS
9

JAZZ

ROCK

TV THTR MOVIE1

ENTERTAINMENT
4
MOVIE2

NIGHT

6.1/5.1

STEREO

+10

ENTER

LEVEL

SET MENU

TITLE

MENU
A/B/C/D/E

–

SELECT

2
4,7

TEST

DISPLAY

RETURN
PRESET/CH

Press j / i to enter the desired setting mode.

Change the unit settings to suit your
listening environment.

Press u / d to exit from the set menu.
The front panel display changes in the following
order:

3,5

Press AMP.

Press SET MENU.
“BASIC MENU” appears on the front panel display.

AMP

Exit
–

SELECT

PRESET/CH

SET MENU

BASIC MENU

MENU
A/B/C/D/E

If the front panel display changes to show anything
other than “BASIC MENU”, press SET MENU until
it displays “BASIC MENU”.

Press j / i to enter into the BASIC menu.
“1 SETUP” appears on the front panel display.
–

SELECT

↑
BASIC
↓↑
SOUND
↓↑
INPUT
↓↑
OPTION
↓

Exit

1 SETUP

PRESET/CH

21
01EN_21-23_HTR-5830_U.p65

12/10/04, 0:33 PM

PREPARATION

1 SETUP
Changes the speaker and amplifier settings to suit the
size of the room you are using. Refer to “Setting the
unit to match your speaker system” on page 23 for
more information.

Use the remote control to make adjustments.
• Press SPEAKERS A/B/OFF on the front panel to select
the front speakers you want to use.
• Make sure you disconnect headphones from this unit.
TV

Press u / d to change the display to the
setting you want to alter.

BASIC SYSTEM SETTINGS

■ Basic menu operation sequence

SET MENU
BASIC

SOUND

INPUT

OPTION

1 SETUP

2 SP LEVEL

Press j / i to alter the settings for each
parameter. Use d to move to the next
setting.

Press j / i to adjust the balance
between each speaker and the front left
speaker. Use d to move to the next
setting.

1 ROOM

1 FL-R

Choose from S/M/L.

Adjust the balance between the front
left and right speakers.

2 SUBWOOFER

Choose either of YES/NONE.

Adjust the balance between the front
left and center speakers.

3 SPEAKERS

3 SL

Choose from 2/3/4/5 spk.

Adjust the balance between the front
left and surround left speakers.

CANCEL 4 SET/CANCEL

4 SR

Choose either of SET/CANCEL.

SET
YES

Adjust the balance between the front left
and surround right speakers.

5 CHECK OK:

5 SWFR

Choose either of YES/NO.

Adjust the balance between the front
left speaker and the subwoofer.

• After altering the “1 SETUP” parameters, readjust the output levels of the speakers at “2 SP LEVEL”.
• See pages 40 – 45 for a detailed explanation of the “SOUND”, “INPUT” and “OPTION” menus.

22
01EN_21-23_HTR-5830_U.p65

12/16/04, 10:57 AM

BASIC SYSTEM SETTINGS

Setting the unit to match your
speaker system
Follow the instructions below to set the amplifier output
to match the size of your room and speakers. Press u / d
to cycle through parameters 1 through 4, and j / i to alter
the parameter setting.
Factory default settings are highlighted.

[U.S.A. and Canada models]
S: 16 x 13 ft, 200 ft2 (4.8 x 4.0 m, 20 m2)
M: 20 x 16 ft, 300 ft2 (6.3 x 5.0 m, 30 m2 )
L: 26 x 19 ft, 450 ft2 (7.9 x 5.8 m, 45 m2 )
[Other models]
S: 3.6 x 2.8 m, 10 m2
M: 4.8 x 4.0 m, 20 m2
L: 6.3 x 5.0 m, 30 m2

3 SPEAKERS
Settings: 2, 3, 4, 5 (spk)
Select the number of speakers connected in your
speaker configuration. This number does not include
your subwoofer.
Speaker

Display

2spk

3spk

L C R

Front L/R,
Center

Front L/R,
Surround L/R

4spk

5spk

L C R
SL

If the test tone is output at the same volume from all
of the speakers, select “CHECK OK: YES”. Press d
to exit from the SETUP menu.
If the volume of the test tone varies between speakers,
press j / i to change the display to “NO”.

Note
• The indicator of the speaker currently outputting the test tone
flashes on the front panel display.

SP LEVEL
(Setting speaker output levels)

2 SUBWOOFER
Settings: YES, NONE
Select YES if you have a subwoofer in your system,
or NONE if you do not.

Setting

5 Use the test tone to check the speaker levels.
When you select SET in 4, the display changes to
“CHECK : Test Tone” for a few seconds, and the unit
outputs a test tone to each of the speakers in turn
twice. When the test tone begins, the display changes
to “CHECK OK?--YES”.

Front L/R

Front L/R, Center,
Surround L/R

Use this menu to compare and adjust the test tone output
from each speaker to the output from the front left (or
surround left) speaker so that the volume level for all
speakers is identical. Press u / d to select a speaker,
then adjust the balance using j / i.

Note
• The unit outputs the test tone from the selected speaker and
the front left (or surround left) speaker in turn. The indicator
of the speaker currently outputting the test tone flashes on the
front panel display.

1 L-R
Adjust the balance between the front left and right
speakers.
2 C
Adjust the balance between the front left and center
speakers.
3 SL
Adjust the balance between the front left and
surround left speakers.
4 SR
Adjust the balance between the surround left and
surround right speakers.
5 SWFR
Adjust the balance between the front left speaker and
the subwoofer.

y
• You can also balance the speaker levels using test tone by
pressing TEST on the remote control.

23
01EN_21-23_HTR-5830_U.p65

12/10/04, 0:33 PM

PREPARATION

1 ROOM
Settings: S, M, L
Select the size of the room you have installed your
speakers in. Roughly speaking, the room sizes are
defined as follows:

4 SET or CANCEL
Select SET to confirm the changes you made. Select
CANCEL to exit SETUP MENU without altering any
of the unit settings. The unit will output a test tone to
the speakers (see 5).

PLAYBACK
1

VOLUME

Press INPUT l / h repeatedly (or one of the
input selector buttons on the remote control)
to select the input you desire.
The selected input source name and input mode
appear on the front panel display for a few seconds.

STANDBY
/ON

PRESET/TUNING

FM/AM

A/B/C/D/E

EDIT

PHONES

STEREO

SPEAKERS

PRESET/TUNING

MEMORY

TUNING MODE

SET MENU

MAN'L/AUTO FM

AUTO/MAN'L MONO

PROGRAM

INPUT

A/B/OFF

INPUT MODE

INPUT

6CH INPUT

EFFECT

TONE CONTROL

MD/CD-R TUNER

SLEEP

D-TV/CBL

V-AUX

BASS/TREBLE

SILENT CINEMA

4 7

DVD

Front panel

VCR

Remote control

SYSTEM

POWER

STANDBY

POWER

MD/CD-R TUNER

DVD

D-TV/CBL

VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

CD
VOLUME

SLEEP

VCR

V-AUX

6CH INPUT

REC
AUDIO
DISC SKIP

CODE SET

DVD

AUTO

Selected input source

Input mode

AMP

VOL

VOLUME

–

MUTE

INPUT

–

Start playback or select a broadcast station
on the source component.
Refer to the operation instructions for the
component.

Adjust the volume to the desired level.

MUTE
HALL
1
MUSIC
5
/DTS
9

JAZZ

ROCK

TV THTR MOVIE1

ENTERTAINMENT
4
MOVIE2

NIGHT

6.1/5.1

STEREO

+10

ENTER

LEVEL

SET MENU

Press STANDBY/ON (or SYSTEM POWER on
the remote control) to turn on the power.

VOLUME

SYSTEM

POWER
STANDBY
/ON

Front panel

VOLUME

–

Remote control
Remote control

Front panel

Turn on the video monitor connected to this
unit.

Press SPEAKERS A/B/OFF on the front
panel to select the front speakers you want
to use.

If desired, use TONE CONTROL and
BASS/TREBLE -/+. These controls only effect the
sound from the front speakers.
TONE CONTROL

BASS/TREBLE

Front panel

SPEAKERS
A/B/OFF

Notes
• If you increase or decrease the high-frequency or the lowfrequency sound to an extreme level, the tonal quality from the
center and surround speakers may not match that of the front
left and right speakers.
• If you have connected a recording component to the VCR
OUT, or MD/CD-R OUT jacks, and you notice distortion or
low volume during playback from other components, try
turning on the recording component.

24
01EN_24-29_HTR-5830_U.p65

12/16/04, 10:57 AM

PLAYBACK

Select a sound field program if desired.
Press PROGRAM l / h (or press AMP to select the
AMP mode, then press one of the field program
buttons repeatedly on the remote control).
See pages 30 - 37 for details about sound field
programs.
PROGRAM

HALL

JAZZ

ROCK

ENTERTAINMENT

MUSIC

5
/DTS
9

Front panel

TV THTR MOVIE1

■ Playing video sources in the background

You can combine a video image from a video source with
a sound from an audio source. For example, you can
enjoy listening to classical music while having beautiful
scenery from the video source on the video monitor.
Use the input selector buttons to select a video source,
then select an audio source.

MOVIE2

NIGHT

6.1/5.1

STEREO

+10

ENTER

DVD

MD/CD-R TUNER

SLEEP

D-TV/CBL

V-AUX

VCR

Remote control

■ To mute the sound

■ Selecting the 6CH INPUT

Press MUTE on the
remote control.
“MUTE” blinks on the front
panel display.
To resume audio output, press
MUTE again.

Press 6CH INPUT until “6CH INPUT” appears on the
front panel display.
6CH INPUT

6CH INPUT

MUTE

Remote control

• You can also cancel mute by pressing VOLUME +/–, etc.
• You can adjust the muting level (see page 45).

■ Night listening mode
Note
• If “6CH INPUT” is shown on the front panel display, no other
source can be played. To select another input source, first
press 6CH INPUT so that “6CH INPUT” disappears from the
front panel display.

This mode reproduces dialogue clearly while reducing the
volume of loud sound effects for easier listening at low
volumes or at night.
Press NIGHT on the
remote control.
The NIGHT indicator in the
front panel display lights up.
Press NIGHT once more to
return to normal reproduction.

NIGHT

y
• You can use night listening mode with any of the sound field
programs.
• Night listening mode may vary in effectiveness depending on
the input source and surround sound settings you use.

■ When you have finished using this unit
Press STANDBY/ON (STANDBY on the
remote control) to set this unit in standby
mode.
STANDBY

STANDBY
/ON

Front panel

Remote control

25
01EN_24-29_HTR-5830_U.p65

12/16/04, 10:57 AM

BASIC
OPERATION

Front panel

PLAYBACK

Input modes and indications
This unit is equipped with 2 types of input jacks. Do the
following to select the type of input signals you want to
use.
Press INPUT MODE repeatedly until the
desired input mode is shown on the front
panel display.
INPUT MODE

Front panel

VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

CD
VOLUME

DVD

AUTO

Selected input source

AUTO

DTS
ANALOG

Input mode

Automatically selects input signals in the
following order:
1) Digital signals*
2) Analog signals
Selects only digital signals encoded in DTS.
If no DTS signals are input, no sound is
output.
Selects only analog signals. If no analog
signals are input, no sound is output.

* If this unit detects a Dolby Digital or DTS signal, the decoder
automatically switches to the appropriate sound field program.

y
You can adjust the default input mode on this unit (see page
44).

Notes
• When you play DTS encoded CD/LDs with the input mode set
to AUTO:
– This unit automatically switches to the DTS decoding
mode. The unit remains in DTS mode (and the “t”
indicator may flash) for up to 30 second after playback of
the DTS source is complete. To manually release the DTS
mode, press INPUT MODE to reselect AUTO.
– The DTS decoding mode may be released if search or skip
operations are performed for more than 30 seconds. To
prevent this, press INPUT MODE to select DTS.
• If the digital output data of the player has been processed in
any way, you may not be able to perform DTS decoding even
if you make a digital connection between this unit and the
player.

26
01EN_24-29_HTR-5830_U.p65

12/10/04, 0:33 PM

PLAYBACK

Selecting a sound field program
You can enhance your listening experience by selecting
sound field programs. For details about each program, see
pages 30 – 33.

After selecting the desired program, press
the same button repeatedly to cycle through
sub-programs if available.
Example:
Pressing MOVIE 2 repeatedly
switches the sub-program between
“Adventure” and “General”.

VOLUME

PROGRAM

or
FM/AM

A/B/C/D/E

EDIT

PRESET/TUNING

MEMORY

TUNING MODE

SET MENU

MAN'L/AUTO FM

AUTO/MAN'L MONO

JAZZ

ROCK

MUSIC

STANDBY
/ON

PRESET/TUNING

HALL

TV THTR MOVIE1

5
/DTS

STEREO

SPEAKERS

PROGRAM

4
MOVIE2

NIGHT

6.1/5.1

STEREO

+10

ENTER

9
PHONES

ENTERTAINMENT

INPUT

A/B/OFF

INPUT MODE

6CH INPUT

EFFECT

TONE CONTROL

BASS/TREBLE

SILENT CINEMA

Front panel

2,3

VCR

VOLUME

–

–
INPUT

DTV/CBL

DVD

MD/CD-R

General

VOL

V-AUX

TUNER

CD
VOLUME

AMP

MUTE

Remote control

–

L C R
SR
LFE SL

Notes

MUTE
HALL
1
MUSIC
5

ROCK

TV THTR MOVIE1

ENTERTAINMENT
4

2,3

MOVIE2

NIGHT

6.1/5.1

STEREO

+10

ENTER

EVE

SET MENU

Press AMP.

Press one of the sound field program
buttons on the remote control to select the
desired program.
The name of the selected program appears on the
front panel display.

AMP

PROGRAM

HALL

JAZZ

ROCK

MUSIC

Front panel

VCR

TV THTR MOVIE1

/DTS
9

ENTERTAINMENT

MOVIE2

NIGHT

6.1/5.1

STEREO

+10

ENTER

Remote control

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

CD
VOLUME

Adventure

• There are 9 programs with sub-programs available with this
unit. However, the selection depends on the input signal
format and not all sub-programs can be used with all input
signal formats.
• You cannot use the digital sound field processor with a source
connected to the 6CH INPUT jacks of this unit or when the
unit is reproducing a digital source with a sampling frequency
greater than 48 kHz.
• The acoustics of your listening room affect sound field
programs. Minimize sound reflections in your room to
maximize the effect created by the program.
• When you select an input source, this unit automatically
selects the last sound field program used with that source.
• When you set this unit in standby mode, it stores the current
source and sound field program in memory and automatically
selects them when you turn on the power again.
• If the unit receives a Dolby Digital or DTS signal when the
input mode is set to AUTO, the sound field program (No. 7–9)
automatically switches to the appropriate decoding program.
• When the unit is reproducing a monaural source with PRO
LOGIC or PRO LOGIC/Enhanced, or PRO LOGIC II Movie,
no sound is output from the front and surround speakers.
Sound can only be heard from the center speaker. (If “1A
CENTER” on the set menu is set to NONE, the center channel
sound is output from the front speakers.)

L C R
SR
LFE SL

y
• Select a program based on your listening preference. Program
names are just for reference.

27
01EN_24-29_HTR-5830_U.p65

12/10/04, 0:33 PM

BASIC
OPERATION

/DTS

JAZZ

PLAYBACK

■ Selecting PRO LOGIC or PRO LOGIC II

You can listen to 2-channel sources decoded into four
discrete channels by selecting PRO LOGIC or five
discrete channels by selecting PRO LOGIC II in program
No. 9 (refer to the list on page 32).

VOLUME

–

–
INPUT

6.1/5.1

VOL

Press 6.1/5.1 to turn on the Dolby Digital + Matrix 6.1 or
DTS + Matrix 6.1 decoder.
+10

AMP

MUTE

■ Playing Dolby Digital EX or DTS ES
material

–
MUTE

HALL
1
MUSIC
5
/DTS

JAZZ

ROCK

ENTERTAINMENT

(Example)

TV THTR MOVIE1

MOVIE2

NIGHT

6.1/5.1

STEREO

+10

ENTER

LEVEL

VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

AUTO:---

SET MENU

Select a 2-channel source and start playback
on the source component.

Press AMP.

Press q/DTS.

AMP

/DTS
9

TUNER

CD
VOLUME

MATRIX

L C R
SR
LFE SL

The display changes AUTO→Matrix 6.1→OFF each time
6.1/5.1 is pressed.
AUTO:
Automatically switches Dolby Digital +
Matrix 6.1 and DTS + Matrix 6.1 depending
on the signal. Virtual surround back speaker
does not work for 5.1- channel sources.
Matrix 6.1: Produces 6-channel playback of the input
source using the Matrix 6.1 decoder. The
virtual surround back speaker can be used
when playing a 5.1-channel source.
OFF:
Virtual surround back speaker does not
work.

Notes

VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

CD
VOLUME

PRO LOGIC

The display cycles as follows each time you press q/
DTS:
PRO LOGIC→PRO LOGIC Enhanced→PRO LOGIC II
Movie→PRO LOGIC II Music→PRO LOGIC→....

• Some 6.1-channel compatible discs do not have a signal (flag)
that this unit can automatically detect. Select “Matrix 6.1” to
play these kinds of discs with 6.1-channel sound.
• 6.1-channel playback is not possible even if you press 6.1/5.1
in the following cases:
– When effects are turned off.
– When the source connected to the 6CH INPUT jacks is
being played.
– When the unit is reproducing a Dolby Digital KARAOKE
source.
– When headphones are connected to the PHONES jack.
• The 6.1/5.1 setting resets to AUTO when you turn the unit
power off.

y
• You can select PRO LOGIC, PRO LOGIC Enhanced, PRO
LOGIC II Movie, and PRO LOGIC II Music by pressing
PROGRAM l / h on the front panel repeatedly.

28
01EN_24-29_HTR-5830_U.p65

12/17/04, 9:22 AM

PLAYBACK

■ Virtual CINEMA DSP

With Virtual CINEMA DSP, you can enjoy all sound field
programs without surround speakers. It creates virtual
speakers to reproduce a natural sound field.
You can listen to virtual CINEMA DSP by setting “1C
SURR” in the set menu to NON. Sound field processing
changes to Virtual CINEMA DSP automatically.

Note
• Virtual CINEMA DSP will not activate, even when 1C SURR
is set to “NONE” (see page 42) in the following cases:
– When the 5ch Stereo, DOLBY DIGITAL, Pro Logic, Pro
Logic II, or DTS program is selected.
– When the sound effect is turned off.
– When 6CH INPUT is selected as the input source.
– When a digital signal with a sampling frequency greater
than 48 kHz is input to this unit.
– When using the test tone.
– When connecting the headphones.

■ To listen with headphones
(SILENT CINEMA)

Notes
• This feature is not available when 6CH INPUT is selected or
the unit is receiving a digital signal with a sampling frequency
greater than 48 kHz.
• The sound from the LFE channel will be mixed and output
from the headphones.

■ Normal stereo reproduction
Press STEREO to turn off the sound effect
for normal stereo reproduction.
Press STEREO again to turn the sound effect back
on.

STEREO

ENTER

• If you turn off the sound effects, no sound is output from the
center speaker or surround speakers.
• If you turn off the sound effects while the unit is reproducing
sound from a Dolby Digital or DTS signal, the dynamic range
of the signal is automatically compressed and the unit will mix
the sounds of the center and surround speaker channels and
output them from the front speakers.
• The volume may be greatly reduced when you turn off the
sound effects or if you set “SOUND 4 D. RANGE (dynamic
range)” on the set menu to MIN. In this case turn on the sound
effect.

y
• During stereo reproduction, you can display information such
as the type, format and sampling frequency of the signal input
from the components connected to this unit.

(While playing a source)

Press AMP.

Press u / d to display the information about
the input signal.

–

SELECT

PRESET/CH

(Format): The display shows the signal format. When the
unit cannot detect a digital signal it
automatically switches to analog input.
in: The display shows the number of input signal
source channels, as follows: For multi-channel
soundtrack such as front 3 channels, surround 2
channels and LFE, the display shows “3/2/
LFE”.
fs: The display shows the sampling frequency.
When the unit is unable to detect the sampling
frequency “Unknown” shows in the front panel
display.
rate: The display shows the bit rate. When the unit is
unable to detect the bit rate “Unknown” shows
in the front panel display.
flg: The display shows the flag - data encoded in a
DTS or Dolby Digital signal that causes this
unit to automatically switch to the appropriate
decoder for playback.

EFFECT

Front panel

Remote control

29
01EN_24-29_HTR-5830_U.p65

12/10/04, 0:33 PM

BASIC
OPERATION

The SILENT CINEMA mode allows you to enjoy multichannel music or movie sound, including Dolby Digital
and DTS surround, through ordinary headphones.
SILENT CINEMA activates automatically whenever you
connect headphones to the PHONES jack while listening
to CINEMA DSP or HiFi DSP sound field programs. The
“SILENT CINEMA” indicator lights up on the front
panel display. (If the sound field programs are off, you
listen with normal stereo reproduction.)

Notes

DIGITAL SOUND FIELD PROCESSING (DSP)
Understanding sound fields
A sound field is defined as the “characteristic sound reflections of a
particular space.” In concert halls and other music venues, we hear
early reflections and reverberations as well as the direct sound
produced by the artist(s). The variations in the early reflections and
other reverberations among the different music venues is what gives
each venue its special and recognizable sound quality.
YAMAHA sent teams of sound engineers all around the world to
measure the sound reflections of famous concert halls and music
venues, and collect detailed sound field information such as the
direction, strength, range, and delay time of those reflections. Then
we stored this enormous amount of data in the ROM chips of this
unit.

■ Recreating a sound field

Recreating the sound field of a concert hall or an opera house requires localizing the virtual sound sources in your
listening room. The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound
field. YAMAHA’s DSP requires four effect speakers to recreate sound fields based on the measured sound field data.
The processor controls the strength and delay time of the signals output from the four effect speakers to localize the
virtual sound sources and fully encompass the listener.

HiFi DSP programs
The following list gives you a brief description of the sound fields produced by each of the sound field programs. Keep
in mind that most of these are precise digital recreations of actual acoustic environments.
No.
1

Features

Program
CONCERT HALL
(except China
model)

A large round concert hall with a rich surround effect. Pronounced reflections from all directions
emphasize the extension of sounds. The sound field has a great deal of presence, and your virtual
seat is near the center, close to the stage.

HALL IN CHINA
(China model only)

A large, extremely famous concert hall in China with approx. 650 seats on the first floor and
approx. 500 seats on the second floor. The clear sound field of this gorgeous and majestic hall is
suited especially for classic music. Your virtual seat is near the center on the first floor.

JAZZ CLUB

This is the sound field at stage front in “The Bottom Line”, a famous New York jazz club, that
seats up to 300 people. Its wide left to right seating arrangement offers a real and vibrant sound.

ROCK CONCERT

The ideal program for lively, dynamic rock music. The data for this program was recorded at LA’s
“hottest” rock club. The listener’s virtual seat is at the center-left of the hall.

ENTERTAINMENT/
Disco

This program recreates the acoustic environment of a lively disco in the heart of a big city. The
sound is dense and highly concentrated. It is also characterized by a high-energy, “immediate”
sound.

ENTERTAINMENT/
5ch Stereo

Using this program increases the listening position range. This is a sound field suitable for
background music at parties, etc.

30
01EN_30-33_HTR-5830_U.p65

12/10/04, 0:33 PM

CINEMA DSP
Sound design of CINEMA DSP
Filmmakers intend for the dialog to be located right on the screen, the effect sound a little farther back, the music spread
even farther back, and the surround sound around the listener. Of course, all of these sounds must be synchronized with
the images on the screen.
CINEMA DSP is an upgraded version of YAMAHA DSP specially designed for movie soundtracks. CINEMA DSP
integrates the DTS, Dolby Digital, and Dolby Pro Logic surround sound technologies with YAMAHA DSP sound field
programs to provide a surround sound field. It recreates comprehensive movie sound design in your audio room. In
CINEMA DSP sound field programs, YAMAHA’s exclusive DSP processing is added to the Front left and right, and
Center channels, so the listener can enjoy realistic dialogue, depth of sound, smooth transition between sound sources,
and a surround sound field that goes beyond the screen.
When a DTS or Dolby Digital signal is detected, the CINEMA DSP sound field processor automatically chooses the
most suitable sound field program for that signal.

L SURROUND SOUND FIELD

DIALOG

EFFECT

BASIC
OPERATION

PRESENCE SOUND FIELD

MUSIC

R SURROUND SOUND FIELD

In addition to the DSP, this unit is equipped with a variety of precise decoders; Dolby Pro Logic decoder for Dolby
Surround sources, Dolby Pro Logic II decoder for Dolby Surround and 2-channel sources, Dolby Digital/DTS decoder
for multi-channel sources and Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder for adding a surround back
channel (the surround back channel is outputted from virtual surround back speaker). You can select CINEMA DSP
programs to optimize these decoders and the DSP sound patterns depending on the input source.

CINEMA DSP Programs
The following list gives you a brief description of the sound fields produced by each of the sound field programs. Keep
in mind that most of these are precise digital recreations of actual acoustic environments. Select the sound field program
that you feel sounds best regardless of the name and description given for it below.

■ For audio-video sources: No. 4 to 6
No.

Program

Features

ENTERTAINMENT/
Game

This program adds a deep and spatial feeling to video game sounds.

MUSIC VIDEO

This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an
actual jazz or rock concert.

TV THEATER/
Mono Movie

This program is provided for reproducing monaural video sources (such as old movies). The
program produces the optimum reverberation to create sound depth using only the presence sound
field.

TV THEATER/Variety/
Sports

Though the presence sound field is relatively narrow, the surround sound field employs the sound
environment of a large concert hall. This effect enhances the experience of watching various TV
programs such as news, variety shows, music programs or sports programs.

31
01EN_30-33_HTR-5830_U.p65

12/10/04, 0:33 PM

CINEMA DSP

■ For movie programs
No.
7

Program
MOVIE
THEATER 1

MOVIE
THEATER 2

Features

Spectacle

This program creates the extremely wide sound field of a 70-mm movie theater. It
precisely reproduces the source sound in detail, making both the video and the sound field
incredibly real. This is ideal for any kind of video source encoded with Dolby Surround,
Dolby Digital or DTS (especially large-scale movie productions).

Sci-Fi

This program clearly reproduces dialog and sound effects in the latest sound form of
science fiction films, thus creating a broad and expansive cinematic space amid the
silence. You can enjoy science fiction films in a virtual-space sound field that includes
Dolby Surround, Dolby Digital and DTS-encoded software employing the most advanced
techniques.

Adventure

This program is ideal for precisely reproducing the sound design of the newest 70-mm and
multichannel soundtrack films. The sound field is made to be similar to that of the newest
movie theaters, so the reverberations of the sound field itself are restrained as much as
possible.

General

This program is for reproducing sounds from 70-mm and multichannel soundtrack films,
and is characterized by a soft and extensive sound field. The presence sound field is
relatively narrow. It spatially spreads all around and toward the screen, restraining the
echo effect of conversations without losing clarity.

Straight Decode

The built-in decoder reproduces source sounds and sound-effects precisely.
No DSP effect is applied in this program.

Enhanced Mode

This program ideally simulates the multi-surround speaker systems of the 35-mm film
theaters. Dolby Pro Logic decoding, Dolby Digital decoding or DTS decoding and digital
sound field processing create precise effects without altering the original sound orientation.
The surround effects produced by this sound field wrap around the viewer naturally from
the back to the left and right, and toward the screen.

Straight Decode
This unit is equipped with various precise decoders;
• Dolby Digital/DTS decoder for multi-channel reproduction of the original sound
• Dolby Pro Logic/Pro Logic II decoder for multi-channel reproduction of 2-channel sources
Select any of the Straight Decode modes in Program No. 9 (except for the sub-program “Enhanced”) as shown in the
above list to use any of these decoders for reproducing the original sound without any sound effects added. In this case,
no DSP effect is applied and the DSP indicator turns off.

Note
• When playing a monaural source with a CINEMA DSP program, the source signal is directed to the center channel, and the front
and surround speakers output effect sounds.

32
01EN_30-33_HTR-5830_U.p65

12/10/04, 0:33 PM

CINEMA DSP

Sound field effects
The 6-channel soundtracks found on 70-mm film produce precise sound field localization and rich, deep sound without
using matrix processing. This unit’s MOVIE THEATER programs provide the same quality of sound and sound
localization that 6-channel soundtracks do. The built-in Dolby Digital or DTS decoder brings the professional-quality
sound designed for movie theaters into your home. With this unit’s MOVIE THEATER programs, you can use Dolby
Digital or DTS technology to recreate a dynamic sound that gives you the feeling of being in a public theater.

■ Dolby Digital/DTS + DSP sound field effect
Presence DSP
sound field

These programs use YAMAHA’s tri-field DSP processing
on each of the Dolby Digital or DTS signals for the front,
left surround, and right surround channels. This
processing enables this unit to reproduce the immense
sound field and surround expression of a Dolby Digitalor DTS-equipped movie theater without sacrificing the
clear separation of all channels.

Right surround DSP
sound field

Left surround DSP
sound field

These programs provide you with the maximum experience of the spacious surround effects by adding an extra
surround back DSP sound field created from the virtual surround back speaker.

■ Dolby Pro Logic + DSP sound field effect
Presence DSP
sound field

Most movie material has 4-channel (left, center, right, and
surround) sound information encoded by Dolby Surround
matrix processing and stored on the left and right tracks.
These signals are processed by the Dolby Pro Logic
decoder. The MOVIE THEATER programs are designed
to recreate the spaciousness and delicate nuances of
sound that tend to be lost in the encoding and decoding
processes.

Surround DSP
sound field

■ Dolby Pro Logic II

Dolby Pro Logic II decodes Dolby Surround software into 5 discrete full-range channels (3 channels in front and 2
channels in surround). There are 2 modes; MOVIE for movies and MUSIC for 2-channel audio sources.

33
01EN_30-33_HTR-5830_U.p65

12/10/04, 0:33 PM

BASIC
OPERATION

■ Dolby Digital/DTS + Matrix 6.1 + DSP sound field effect

TUNING
There are 2 methods of tuning; automatic and manual.
Automatic tuning is effective when station signals are
strong and there is no interference.

■ Automatic tuning

Press PRESET/TUNING l / h once to begin
automatic tuning.
Press h to tune in to a higher frequency, or press l
to tune in to a lower frequency.
PRESET/TUNING

SET MENU

VOLUME

STANDBY
/ON

PRESET/TUNING

FM/AM

A/B/C/D/E

STEREO

SPEAKERS

PRESET/TUNING

MEMORY

TUNING MODE

SET MENU

MAN'L/AUTO FM

AUTO/MAN'L MONO

EDIT

PHONES

PROGRAM

INPUT

A/B/OFF

INPUT MODE

6CH INPUT

EFFECT

TONE CONTROL

BASS/TREBLE

VCR

SILENT CINEMA

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

AUTO TUNED

A
4
1

AM 1530 kHz

When the unit is tuned in to a station, the “TUNED”
indicator lights up and the frequency of the station
received is shown on the front panel display.

Press INPUT l / h (or TUNER on the remote
control) to select TUNER as the input source.

■ Manual tuning

If the signal from the station you are trying to select is
weak, tune in to it manually.
INPUT

TUNER

Front panel

Remote control

Select TUNER and the reception band
following steps 1 and 2 described in
“Automatic tuning” at left.

Press TUNING MODE (AUTO/MAN’L MONO)
until the “AUTO” indicator disappears from
the front panel display.

Press FM/AM to select the reception band.
“FM” or “AM” appears on the front panel display.

TUNING MODE

AUTO

FM/AM

AUTO/MAN'L MONO

If the colon (:) appears on the front panel display,
tuning is not possible. Press PRESET/TUNING
(EDIT) to turn it off.

Press TUNING MODE (AUTO/MAN’L MONO)
so that the “AUTO” indicator lights up on the
front panel display.
TUNING MODE

VCR

AUTO

EDIT

If the colon (:) appears on the front panel display,
tuning is not possible. Press PRESET/TUNING
(EDIT) to turn it off.
VCR

PRESET/TUNING

EDIT

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

AUTO TUNED

V-AUX

DTV/CBL

DVD

MD/CD-R

PRESET/TUNING

Lights up

AUTO/MAN'L MONO

Disappears

AM 1440 kHz

TUNER
TUNED

AM 1440 kHz

Press PRESET/TUNING
l / h to tune in to the
desired station manually.
Hold down the button to
continue searching.

PRESET/TUNING

SET MENU

Note
• Manually tuning in to an FM station will automatically change
the reception mode to monaural to increase the signal quality.

34
01EN_34-39_HTR-5830_U.P65

12/16/04, 10:58 AM

TUNING

Notes

Presetting stations
■ Automatically presetting FM stations

You can use the automatic preset tuning feature to store
FM stations. This function enables the unit to
automatically tune in to FM stations with strong signals,
and to store up to 40 (8 stations in 5 groups, A1 through
E8) of those stations in order. You can then recall any
preset station easily by selecting the preset number.

3 2
VOLUME

STANDBY
/ON

PRESET/TUNING

FM/AM

A/B/C/D/E

EDIT

PHONES

STEREO

SPEAKERS

PRESET/TUNING

MEMORY

TUNING MODE

SET MENU

MAN'L/AUTO FM

AUTO/MAN'L MONO

PROGRAM

INPUT

A/B/OFF

INPUT MODE

6CH INPUT

EFFECT

TONE CONTROL

BASS/TREBLE

SILENT CINEMA

Press FM/AM to select the FM band.
FM/AM

Press TUNING MODE (AUTO/MAN’L MONO)
until the “AUTO” indicator lights up on the
front panel display.
TUNING MODE

AUTO

Lights up

AUTO/MAN'L MONO

Press and hold MEMORY (MAN’L/AUTO FM)
for more than 3 seconds.
The preset number, the “MEMORY” and “AUTO”
indicators flash. After about 5 seconds, automatic
presetting starts from the frequency currently
displayed and proceeds toward the higher
frequencies.

Automatic preset tuning options
You can select the preset number from which this unit
will store FM stations and/or begin tuning toward lower
frequencies.
After pressing MEMORY in step 3:
1 Press A/B/C/D/E, then PRESET/TUNING l / h to
select the preset number under which the first station
will be stored. Automatic preset tuning will stop when
stations have all been stored up to E8.
2 Press PRESET/TUNING (EDIT) to turn off the colon
(:) and then press PRESET/TUNING l to begin
tuning toward lower frequencies.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.

MEMORY

MAN'L/AUTO FM

VCR

V-AUX

DTV/CBL

DVD

MD/CD-R
AUTO

TUNER

CD
MEMORY

A1:FM 89.9 MHz
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.

35
01EN_34-39_HTR-5830_U.P65

12/10/04, 0:33 PM

BASIC
OPERATION

• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• If the number of the received stations does not reach 40 (E8),
automatic preset tuning has automatically stopped after
searching all stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune in to it manually
in the monaural mode, and store it by following the procedure
described in “Manually presetting stations” on page 36.

TUNING

■ Manually presetting stations

You can store up to 40 stations (8 stations x 5 groups)
manually.

2,5

Press PRESET/TUNING l / h to select a
preset station number (1 to 8) while the
“MEMORY” indicator is flashing.
Press h to select a higher preset station number.
Press l to select a lower preset station number.
PRESET/TUNING

VOLUME

SET MENU
STANDBY
/ON

PRESET/TUNING

FM/AM

A/B/C/D/E

EDIT

PHONES

PRESET/TUNING

MEMORY

TUNING MODE

SET MENU

MAN'L/AUTO FM

AUTO/MAN'L MONO

STEREO

SPEAKERS

PROGRAM

INPUT

A/B/OFF

INPUT MODE

6CH INPUT

EFFECT

TONE CONTROL

BASS/TREBLE

SILENT CINEMA

VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER
TUNED

C3:AM 1440 kHz

CD
MEMORY

Preset number

Tune in to a station.
See page 34 for tuning instructions.
VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

5
TUNER
TUNED

AM 1440 kHz

Press MEMORY (MAN’L/AUTO FM) on the
front panel while the “MEMORY” indicator is
flashing.
The station band and frequency appear on the front
panel display with the preset group and number you
have selected.

When tuned in to a station, the front panel display
shows the frequency of the station received.

MEMORY

MAN'L/AUTO FM

Press MEMORY (MAN’L/AUTO FM).
The “MEMORY” indicator flashes for about
5 seconds.
MEMORY
VCR

MEMORY

A/B/C/D/E

VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER
TUNED

TUNER

Repeat steps 1 to 5 to store other stations.

Notes
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• The reception mode (stereo or monaural) is stored along with
the station frequency.

CD
MEMORY

Preset group

36
36

MD/CD-R

Shows the displayed station has been stored as C3.

C :AM 1440 kHz

01EN_34-39_HTR-5830_U.P65

DVD

C3:AM 1440 kHz

Flashes

Press A/B/C/D/E repeatedly to select a preset
station group (A to E) while the “MEMORY”
indicator is flashing.
The group letter appears. Check that the colon (:) is
showing on the front panel display.

DTV/CBL

TUNED

MAN'L/AUTO FM

V-AUX

12/10/04, 0:33 PM

TUNING

■ Exchanging preset stations

Selecting preset stations
You can tune any desired station simply by selecting the
preset station number under which it was stored.

You can exchange the assignment of two preset stations
with each other. The example below describes the
procedure for exchanging preset station “E1” with “A5”.
VOLUME

VOLUME
STANDBY
/ON

PRESET/TUNING

STANDBY
/ON

FM/AM

A/B/C/D/E

EDIT

PRESET/TUNING

FM/AM

A/B/C/D/E

PRESET/TUNING

MEMORY

SPEAKERS

PHONES

TUNING MODE

STEREO

PRESET/TUNING

MEMORY

TUNING MODE

SET MENU

MAN'L/AUTO FM

AUTO/MAN'L MONO

PROGRAM

INPUT

A/B/OFF

INPUT MODE

6CH INPUT

EFFECT

EDIT

SET MENU

MAN'L/AUTO FM

AUTO/MAN'L MONO

TONE CONTROL

PHONES

STEREO

SPEAKERS

PROGRAM

BASS/TREBLE

SILENT CINEMA

INPUT

A/B/OFF

INPUT MODE

6CH INPUT

EFFECT

TONE CONTROL

BASS/TREBLE

SILENT CINEMA

2, 4 1, 3 1, 3

MUTE

INPUT

HALL

JAZZ

ROCK

MUTE

MUSIC
5
/DTS
9

ENTERTAINMENT
4

TV THTR MOVIE1

MOVIE2

NIGHT

6.1/5.1

STEREO

+10

ENTER

LEVEL

SET MENU

TITLE

SELECT

TEST

DISPLAY

RETURN
PRESET/CH

Press and hold PRESET/TUNING (EDIT) for
more than 3 seconds.
“E1” and the “MEMORY” indicator flash on the
front panel display.

Press A/B/C/D/E (or A/B/C/D/E on the remote
control) to select the preset station group.
The preset group letter appears on the front panel
display and changes each time you press A/B/C/D/E.
A/B/C/D/E

VCR

PRESET/TUNING

SET MENU

Front panel

Remote control

Press PRESET/TUNING l / h (or PRESET u
/ d on the remote control) to select a preset
station number (1 to 8).
The preset group and number appear on the front
panel display along with the station band, frequency
and the “TUNED” indicator lights up.

–

SELECT

DVD

MD/CD-R

TUNER

CD
MEMORY

Select preset station “A5” using
A/B/C/D/E and PRESET/TUNING l / h.
“A5” and the “MEMORY” indicator flash on the
front panel display.
VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER
TUNED

CD
MEMORY

A5:FM 90.6 MHz
4

PRESET/TUNING

DTV/CBL

E1:FM 87.5 MHz

EDIT

A/B/C/D/E

V-AUX

TUNED

Select preset station “E1” using
A/B/C/D/E and PRESET/TUNING l / h.
See “Selecting preset stations” at left.

Press PRESET/TUNING (EDIT) again.
The stations stored at the two preset assignments are
exchanged.

SET MENU
PRESET/CH

PRESET/TUNING

VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

CD
MEMORY

Front panel

Remote control
EDIT

EDIT

E1-A5

Shows the exchange of stations has been
completed.
VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

TUNED

C3:AM 1440 kHz

37
01EN_34-39_HTR-5830_U.P65

12/16/04, 10:58 AM

BASIC
OPERATION

1
2

MENU
A/B/C/D/E

–

SLEEP TIMER
Use this feature to automatically set this unit in the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source.

■ Canceling the sleep timer
Press SLEEP repeatedly until “SLEEP OFF”
appears on the front panel display.
After a few seconds, “SLEEP OFF” disappears, and
the “SLEEP” indicator goes off.

The sleep timer can only be set with the remote control.

y
• By connecting a commercially available timer to this unit, you
can also set a wake-up timer. Refer to the operation
instructions of the timer.

■ Setting the sleep timer

y
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or STANDBY/ON on the
front panel) to set this unit to the standby mode.

SYSTEM

POWER

STANDBY

POWER

MD/CD-R TUNER

DVD

D-TV/CBL

SLEEP

VCR

SLEEP

V-AUX

6CH INPUT

REC
AUDIO
DISC SKIP

CODE SET

AMP

Select a source and start playback on the
source component.

Press SLEEP repeatedly
SLEEP
to set the amount of time.
Each time you press SLEEP,
the front panel display changes
as shown below. The SLEEP indicator flashes while
switching the amount of time for sleep timer.

VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

CD
VOLUME

HiFi DSP

SLEEP

SLEEP
3

120min

The “SLEEP” indicator lights up on the front
panel display after the sleep timer has been
set.
VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

CD
VOLUME

HiFi DSP

SLEEP

ROCK CONCERT

38
01EN_34-39_HTR-5830_U.P65

12/10/04, 0:33 PM

RECORDING
Recording adjustments and other operations are
performed on other recording components. Refer to the
operation instructions for these components for details on
their operation .

VOLUME

STANDBY
/ON

PRESET/TUNING

FM/AM

A/B/C/D/E

EDIT

PHONES

STEREO

SPEAKERS

PRESET/TUNING

MEMORY

TUNING MODE

SET MENU

MAN'L/AUTO FM

AUTO/MAN'L MONO

PROGRAM

INPUT

A/B/OFF

INPUT MODE

6CH INPUT

EFFECT

TONE CONTROL

BASS/TREBLE

SILENT CINEMA

2
POWER

POWER

MD/CD-R TUNER

DVD

D-TV/CBL

SLEEP

VCR

V-AUX

BASIC
OPERATION

STANDBY

• Do a test recording before you start an actual recording.
• When this unit is set in the standby mode, you cannot record
between other components connected to this unit.
• The setting of TONE CONTROL, VOLUME, “SP LEVEL”
(page 23) and programs does not affect the recorded material.
• A source connected to the 6CH INPUT jacks of this unit
cannot be recorded.
• A given input source is not output on the same REC OUT
channel. (For example, the signal input from VCR 1 IN is not
output on VCR 1 OUT.)
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording of copyrighted material
may infringe copyright laws.

If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.

SYSTEM

POWER

Notes

6CH INPUT

REC
AUDIO
DISC SKIP

CODE SET

AMP

Turn on the power of this unit and all
connected components.

Select the source component you want to
record from.

INPUT

Front panel

DVD

MD/CD-R TUNER

SLEEP

D-TV/CBL

V-AUX

VCR

Remote control

Start playback (or select a broadcast station)
on the source component.

Start recording on the recording component.

39
01EN_34-39_HTR-5830_U.P65

12/10/04, 0:33 PM

SET MENU
You can set the following parameters on the set menu to obtain a better sound from the unit. Change the settings to
reflect the needs of your listening environment.

Set menu list
The set menus are divided by use and function into the 4
categories listed here.

Adjusting the items on the set
menu
Use the remote control to make adjustments.

■ BASIC MENU

The BASIC MENU contains the basic parameters that
you must set before using this unit. It consists of the
following menus. See pages 21 – 23 for a detailed
explanation.

AMP

VOL

VOLUME

–

MUTE

INPUT

–
MUTE

HALL

1 SETUP

1
MUSIC
5

2 SP LEVEL (Speaker level)

/DTS
9

JAZZ

ROCK

ENTERTAINMENT
4

TV THTR MOVIE1
7

NIGHT

6.1/5.1

STEREO

+10

ENTER

LEVEL

SET MENU

TITLE

■ SOUND MENU

8
2
3,5,8

MOVIE2

MENU
A/B/C/D/E

–

The SOUND MENU contains parameters for altering
sound output. It consists of the following menus that you
can use to alter the quality and tone of the sound output
by the system.
1 SPEAKER SET
2 SP DISTANCE (Speaker distance)
3 LFE LEVEL (Low frequency effect level)
4 D. RANGE (Dynamic range)
5 CENTER GEQ (Center graphic equalizer)
6 HP TONE CTRL (Headphone tone control)

■ INPUT MENU

The INPUT MENU contains parameters concerned with
signal input. It consists of the following menus that you
can use to change the assignment of input jacks.

SELECT

TEST

DISPLAY

RETURN
PRESET/CH

4,6,7

y
• You can change set menu parameters while the unit is
reproducing sound.
• You can use NEXT and SET MENU +/– on the front panel to
change these settings, if the unit is not set to TUNER mode.
Press NEXT to select the category or field you wish to change,
and SET MENU +/– to change the parameters.

Note
• You cannot change some set menu parameters while the unit is
in night listening mode.

Press AMP.

AMP

Press SET MENU to enter
the set menu.

SET MENU

1 I/O ASSIGN
2 INPUT MODE

■ OPTION MENU

MENU
A/B/C/D/E

This is a supplementary set up menu provided for your
convenience. It consists of the following menus that you
can use to change display brightness, protect existing
settings, and perform other non-essential functions.

Press u / d repeatedly to select the desired
menu.

1 DISPLAY SET

Press j / i to enter the selected menu.

Press u / d repeatedly to select the item
you want to adjust.

2 MEM. GUARD
3 AUDIO MUTE
• In the descriptions for each item from the following page, the
default setting is indicated in bold.

–

SELECT

PRESET/CH

y
• By pressing SET MENU repeatedly, you can select items in
the same order as when pressing d.

40
01EN_40-46_HTR-5830_U.p65

12/10/04, 0:33 PM

SET MENU

Press j / i once to enter
the setup mode of the
selected item.
The last setting you adjusted
appears on the front panel
display.

–

SELECT

PRESET/CH

Use this feature to select suitable output modes for your
speaker configuration.

Depending on the menu item,
press u/d to select a sub
item.

Note
–

SELECT

PRESET/CH

–

SELECT

To exit, press u / d repeatedly until the
menu disappears or just press one of the
sound field program group buttons.

–

SELECT

HALL

JAZZ

ROCK

MUSIC

5
/DTS
9

PRESET/CH

• Some menu item settings have no effect when the unit is
reproducing a source with a digital signal sampling frequency
greater than 48 kHz.

■ 1A CENTER (center speaker mode)

Press j / i repeatedly to
change the menu item
setting.

PRESET/CH

SOUND 1 SPEAKER SET
(speaker mode settings)

TV THTR MOVIE1

ENTERTAINMENT
4

If you add a center speaker to your speaker configuration,
this unit can provide better dialog localization for several
listeners and superior synchronization of sound and
images.
Choices: LRG (large), SML (small), NON (none)
LRG
Select this if you have a large center speaker. The unit
directs the entire range of the center channel signal to the
center speaker.

MOVIE2

NIGHT

6.1/5.1

STEREO

+10

ENTER

NON
Select this if you do not have a center speaker. The unit
directs all of the center channel signal to the front left and
right speakers.

The BASIC and SOUND menus
The “BASIC” menu allows you to easily set the
“SOUND 1 SPEAKER SET” and “SOUND 2 SP
DISTANCE” parameters. It is not necessary to reset
any of the parameters in the “BASIC” menu, but you
can access more detailed parameters in the “SOUND”
menu if you wish.

Note
• After altering parameters in the “SOUND” menu, if you
select “BASIC 1 SETUP” and then select “SET”, the
parameters from the “SOUND” menu alter in response to
any changes you make in “BASIC 1 SETUP”. Do not enter
the “BASIC 1 SETUP” menu unless you wish to change
these settings. If you accidentally enter the “BASIC 1
SETUP” menu, select CANCEL to return to the “BASIC”
menu. (page 22)

41
01EN_40-46_HTR-5830_U.p65

12/16/04, 10:58 AM

ADVANCED
OPERATION

Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than
one week, the stored data will be lost. If this happens,
adjust the items again.

SML
Select this if you have a small center speaker. The unit
directs the low-frequency signals (90 Hz and below) of
the center channel to the speakers selected with “1D
BASS”.

SET MENU

■ 1B FRONT (front speaker mode)
Choices: LRG (large), SML (small)

LRG
Select this if you have large front speakers. The unit
directs the entire range of the front left and right channel
signals to the front left and right speakers.
SML
Select this if you have small front speakers. The unit
directs the low-frequency signals (90Hz and below) of the
front channel to the speakers selected with “1D BASS”.

■ 1D BASS (bass out mode)

LFE signals carry low-frequency effects when this unit
decodes a Dolby Digital or DTS signal. The Lowfrequency signals can be directed to both front left and
right speakers, and to the subwoofer (subwoofer can be
used for both stereo reproduction and the sound field
program).
Choices: SWFR (subwoofer), FRNT, BOTH

■ 1C SURR (surround speaker mode)

SWFR
Select SWFR if you connect a subwoofer. LFE and lowfrequency signals from other channels are directed to the
subwoofer according to the speaker settings.

LRG
Select this if you have large surround left and right
speakers. The entire range of the surround channel signal
is directed to the surround left and right speakers.

FRNT
Select FRNT if you do not use a subwoofer. LFE and
low-frequency signals from other channels are directed to
the front speakers according to the speaker settings (even
if you have previously set the front speakers to SML).

Choices: LRG (large), SML (small), NON (none)

SML
Select this if you have small surround left and right
speakers. The low-frequency signals (90Hz and below) of
the surround channel are directed to the speakers selected
with “1D BASS”.
NON
Select this if you do not have surround speakers.
This unit is set in the virtual CINEMA DSP mode when
you select NON for “1C SURR”.

BOTH
Select BOTH if you connect a subwoofer and you want to
output low-frequency signals from front channels to both
front speakers and the subwoofer. LFE and low-frequency
signals from other channels are directed to the subwoofer
according to the speaker settings.
Use this function to reinforce low-frequency signals using
the subwoofer when playing back source such as CDs.

Note
• When you select FRNT for “1D BASS”, the unit directs the
low-frequency signals (90Hz and below) of the front channel
to the front speakers even if you select SML for the front
speaker mode.

42
01EN_40-46_HTR-5830_U.p65

12/16/04, 10:58 AM

SET MENU

SOUND 2 SP DISTANCE
(speaker distance)
Use this feature to manually input the distance of each
speaker and adjust the delay applied to respective
channel. Ideally, each speaker should be the same
distance from the main listening position. However, this is
not possible in most home situations. Thus, a certain
amount of delay must be applied to the sound from each
speaker so that all sound will arrive at the listening
position at the same time.

Press u / d to select “UNIT”.

Press j / i to select the unit “meters” or
“feet” to be used in setting.

Press u / d to select a speaker.

Press j / i to set the distance.
Press i for higher values and j for lower values.

C
L

SOUND 3 LFE LEVEL
Use to adjust the output level of the LFE (low-frequency
effect) channel according to the capacity of your
subwoofer or headphones. The LFE channel carries lowfrequency special effects which are only added to certain
scenes. This setting is effective only when this unit
decodes Dolby Digital or DTS signals.
Control range:
SP LFE (Speaker) ............. –20 to 0 dB
HP LFE (Headphone) ....... –20 to 0 dB
Initial setting: 0 dB

Press u / d to select the item to be
adjusted.

Press j to adjust the LFE level.

Note
• Adjust the LFE level according to the capacity of your
subwoofer or headphones.

SOUND 4 D. RANGE
(dynamic range)
Use this feature to adjust the dynamic range. This setting
is effective only when the unit is decoding Dolby Digital
signals.

ADVANCED
OPERATION

Choices: MAX (maximum), STD (standard),
MIN (minimum)
MAX
Select MAX for feature films.

■ Setting by “meters”

STD
Select STD for general use.

Initial settings:

MIN
Select MIN for listening to sources at low volume levels.

Control range:

0.30 to 24.00 m (for front L/R, center,
surround L/R)
3.00 m (for front L/R, center,
surround L/R)

■ Setting by “feet”
Control range:

Initial settings:

1.0 to 80.0 ft (for front L/R, center,
surround L/R)
10.0 ft (for front L/R, center,
surround L/R)

Note
• No delay will be set if you set the same distance for the front
L/R and center, or the surround L/R.

43
01EN_40-46_HTR-5830_U.p65

12/10/04, 0:33 PM

SET MENU

SOUND 5 CENTER GEQ (center
graphic equalizer)
Use this feature to adjust the built-in 5-band graphic
equalizer so that the center speaker tonal quality matches
that of the left and right front speakers. You can select the
100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.
Control range (dB): –6 to +6
Initial setting: 0 dB for 5-band

Press d to select a higher frequency and u
to select a lower frequency.

Press j / i to adjust the level of that
frequency.

Note
• You can monitor the center speaker sound while adjusting this
parameter by using the test tone. Press TEST before starting
the foregoing procedure. Once you begin this procedure, the
test tone remains at the center speaker and you can hear how
the sound changes as you adjust the various frequency levels.
To stop the test tone, press TEST.

SOUND 6 HP TONE CTRL
(headphone tone control)
Use this feature to adjust the level of the bass and treble
when you are using headphones.
Control range (dB):
HP BASS .................... –6 to +3
HP TRBL (treble) ....... –6 to +3
Initial setting:
HP BASS .................... 0 dB
HP TRBL ................... 0 dB

INPUT 1 I/O ASSIGN (input/
output assignment)
You can assign jacks according to the component to be
used if this unit’s initial settings do not correspond to
your needs. Change the following parameters to reassign
the respective jacks and effectively connect more
components. Once the inputs have been reassigned, you
can select the corresponding component by using INPUT
l / h on the front panel or the input selector buttons on
the remote control.
For COMPONENT VIDEO jacks A (1A[A]) and B
(1A[B])
Choices:
[A] VCR, V-AUX, DTV/CBL, DVD
[B] VCR, V-AUX, DTV/CBL, DVD
For OPTICAL INPUT jacks 1 (1B(1)) and 2
(1B(2))
Choices:
(1) VCR, V-AUX, DTV/CBL, DVD,
MD/CD-R, CD
(2) VCR, V-AUX, DTV/CBL, DVD,
MD/CD-R, CD
For COAXIAL INPUT jack 3 (1C(3))
Choices:
VCR, V-AUX, DTV/CBL, DVD,
MD/CD-R, CD

Notes
• You cannot select a specific item more than once for the same
type of jack.
• When you connect a component to both the COAXIAL and
OPTICAL jacks, priority is given to the input signals from the
COAXIAL jack.

INPUT 2 INPUT MODE
(initial input mode)
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn
on this unit (see page 26 for details about the input
mode).
Choices: AUTO, LAST
AUTO
Select this setting to allow the unit to automatically detect
the type of input signal and select the appropriate input
mode.
LAST
Select this setting to set this unit to automatically select
the last input mode used for the respective sources.

44
01EN_40-46_HTR-5830_U.p65

12/10/04, 0:33 PM

SET MENU

OPTION 1 DISPLAY SET
■ DIMMER

Use this to adjust the brightness of the front panel display.
Control range: –4 to 0

OPTION 2 MEM. GUARD
(memory guard)
Use this feature to prevent accidental changes to sound
field program parameter values and other system settings.
Choices: ON, OFF
Select ON to protect:
• Sound field program parameters
• All SET MENU items
• All speaker levels
When MEMORY GUARD is set to ON, you cannot use
the test tone or select any other SET MENU items.

OPTION 3 AUDIO MUTE
Use to adjust how much the mute function reduces the
output volume.
Choices: MUTE, –50dB, –20dB

ADVANCED
OPERATION

MUTE
Completely halts all output of sound.
–50dB
Reduces the volume of the present sound output by 50dB.
–20dB
Reduces the volume of the present sound output by 20dB.

45
01EN_40-46_HTR-5830_U.p65

12/10/04, 0:33 PM

ADVANCED SETUP MENU
The ADVANCED SETUP menu is displayed in the front
panel display.

y
• During the advanced setup procedure, audio output is muted.
• During the advanced setup procedure, only the STANDBY/
ON, STRAIGHT (EFFECT) and PROGRAM l / h buttons
on the front panel are available for operation.

VOLUME

STANDBY
/ON

PRESET/TUNING

FM/AM

A/B/C/D/E

EDIT

PHONES

SPEAKERS

STEREO

PRESET/TUNING

MEMORY

TUNING MODE

SET MENU

MAN'L/AUTO FM

AUTO/MAN'L MONO

PROGRAM

Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening
environment.
Factory presets PRESET
Use to reset all parameters to the factory presets (see page
57).
Choices: CANCEL, RESET
• Select CANCEL if you do not want this unit’s
parameters to be initialized.
• Select RESET if you want all of this unit's parameters
to be initialized.

INPUT

A/B/OFF

INPUT MODE

6CH INPUT

Note

EFFECT

TONE CONTROL

■ ADVANCED SETUP menu items

BASS/TREBLE

SILENT CINEMA

• This setting does not affect ADVANCED SETUP menu item
parameters.

1,3
1

1,2

< Asia and General models only >
Turn off the power to this unit, and while
holding down STEREO (EFFECT), press
STANDBY/ON.
This unit turns on, and “PRESET” appears in the
front panel display.
If you are using Asia and General model, you can
select the menu by pressing PROGRAM l / h.
STEREO

EFFECT

While holding
down, press

Tuner TU
Use to switch the frequency step selection according to
the frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
• North, Central and South America:
AM10/FM100 (kHz)
• Other areas: AM9/FM50 (kHz)

STANDBY
/ON

Press STEREO (EFFECT) repeatedly to
toggle between the available parameters.
STEREO

EFFECT

Press STANDBY/ON to confirm your
selection.

STANDBY
/ON

This completes the advanced setup procedure.
The settings you made are reflected the next time this
unit's power is turned on.

46
01EN_40-46_HTR-5830_U.p65

12/16/04, 10:58 AM

REMOTE CONTROL FEATURES
In addition to controlling this unit, the remote control can also operate other A/V components made by YAMAHA and
other manufacturers. To control other components, you must set up remote control with the appropriate remote control
codes.

Control area
■ Controlling this unit

The shaded areas below can be used to control this unit
when the AMP mode is selected. Press AMP to select the
AMP mode.

SYSTEM

Input selector
buttons

POWER

DVD

STANDBY

POWER

MD/CD-R TUNER

SLEEP

D-TV/CBL

V-AUX

VCR

6CH INPUT

REC
AUDIO
DISC SKIP

CODE SET

The buttons in the
dotted lines (SYSTEM
POWER, STANDBY,
SLEEP, 6CH INPUT,
VOLUME +/– and
MUTE) function in
any mode.

■ Controlling other components

The shaded areas below can be used to control other
components. Each button has a different function
depending on the selected components. Select the
component you want to control by pressing an input
selector button.

Input selector buttons switch the
control area for each component.

SYSTEM

STANDBY
POWER
POWER

DVD

POWER

POWER
POWER

TV
AV
TV
AV
MD/CD-R TUNER

D-TV/CBL

SLEEP

VCR

V-AUX

AMP

Press AMP to control
this unit.

VOL

VOLUME

–

MUTE

INPUT

HALL

JAZZ

ROCK

6CH INPUT
REC
AUDIO
DISC SKIP

MUTE

MUSIC
5
/DTS
9

TV THTR MOVIE1

ENTERTAINMENT

NIGHT

6.1/5.1

STEREO

+10

LEVEL

ENTER

MENU
A/B/C/D/E

–

SELECT

TEST

DISPLAY

RETURN
PRESET/CH

Component control area
You can control up to 7 different
components by setting
appropriate remote control codes
(see page 48).

MUTE

HALL
1
MUSIC
5
/DTS
9

VOLUME

–

MUTE
INPUT

JAZZ

ROCK

TV THTR MOVIE1

ENTERTAINMENT
4
MOVIE2

NIGHT

6.1/5.1

STEREO

+10

ENTER

LEVEL

SET MENU

TITLE

MENU
A/B/C/D/E

–

SELECT

TEST

DISPLAY

RETURN
PRESET/CH

47
01EN_47-50_HTR-5830_U.p65

12/16/04, 10:58 AM

ADVANCED
OPERATION

TITLE

VOL

–

SET MENU

4
MOVIE2

REMOTE CONTROL FEATURES

Setting remote control codes
You can control other components by setting the
appropriate remote control codes. Codes can be set up for
each input area.
The following table shows the default component
(Library: component category) and the remote control
code for each area.
Input area

Component category
(Library)

Manufacturer

Code

199

CD player

YAMAHA

MD/CD-R

CD recorder

YAMAHA

499

TUNER*1

Tuner

YAMAHA

Fixed

DVD

DVD player

YAMAHA

699

D-TV/CBL*2

–

V-AUX

–

VCR

–

* You can control this unit and other Yamaha tuners only.
*2 You can only set TV remote control codes for the D-TV/CBL
buttons.

Press and hold CODE SET. With CODE SET
depressed, press an input selector button to
select the component you want to set up.
CD

MD/CD-R TUNER

DVD

D-TV/CBL

SLEEP

VCR

V-AUX

6CH INPUT

REC
AUDIO
DISC SKIP

CODE SET

AMP

Note
• You must press and hold CODE SET throughout this
procedure.

With CODE SET depressed, use the numeric
buttons to enter the 3 digit code of your
component’s manufacturer.
• Refer to the LIST OF REMOTE CONTROL
CODES at the end of this manual.
• To reset the code, enter the factory-set code for
each component shown in the above table.
6CH INPUT

REC
AUDIO
DISC SKIP

CODE SET

AMP

+
VOL

VOLUME

–

MUTE

INPUT

HALL

JAZZ

ROCK

–

MUTE

1
MUSIC
5
/DTS
9

TV THTR MOVIE1

ENTERTAINMENT
4
MOVIE2

NIGHT

6.1/5.1

STEREO

+10

ENTER

LEVEL

SET MENU

TITLE

Notes
• If the manufacturer of your component has more than one
code, try each of them until you find the correct one.
• You can only assign one remote control code to each input
selector button.

48
01EN_47-50_HTR-5830_U.p65

12/10/04, 0:33 PM

REMOTE CONTROL FEATURES

Controlling other components
Once you set the appropriate remote control codes,
you can use this remote to control your other
components. Note that some buttons may not correctly
operate the selected component. Use the input selector
buttons to select the component you want to operate.
The remote control automatically switches to the
appropriate control mode for that component.

1
SYSTEM

POWER

DVD

STANDBY

POWER

MD/CD-R TUNER

SLEEP

D-TV/CBL

V-AUX

VCR

6CH INPUT

REC

4
5
6
7

*1
*2

Power

VOLUME

–

MUTE

INPUT

HALL

JAZZ

ROCK

ENTERTAINMENT

VOL

CD player
*1

VCR power

9
0
q

LEVEL

SET MENU

TITLE

NIGHT

6.1/5.1

STEREO

+10

PRESET/CH

Power

TV power

Play
Search backward

Search forward

VCR search forward

TV power

Search backward

Power

VCR search backward

Search backward

Tuner

CD/MD recorder

Play

Search backward

DISPLAY

RETURN

Disc skip

Play

SELECT

TEST

VCR rec

Play

w
e

ENTER

A/B/C/D/E

–

VCR play

MOVIE2

TV power

Rec

TV THTR MOVIE1

MUTE

Power

TV power

Disc skip

ENTERTAINMENT

MUSIC

CODE SET

TV, digital/cable TV

TV power

Power

TV power

Rec (MD)

Audio
Pause

Pause

VCR pause

Skip backward

Pause

Skip backward

Skip forward

Skip forward
Stop
*2
*2

TV channel up

TV channel down

TV volume up

TV volume down

Stop
*2

TV channel up

TV channel down

TV volume up

TV volume down

TV mute

TV input

Numeric buttons

VCR stop

TV channel up
TV channel down
TV volume up
TV volume down

Stop
TV channel up

TV channel down

TV volume up

TV volume down

TV mute

TV input

Numeric buttons

TV mute

Stop

*2
*2

ADVANCED
OPERATION

1 AV POWER
2 TV POWER
3 REC/DISC SKIP
w
e
r
AUDIO
d
t
y
a
4 TV CH +
TV CH –
5 TV VOL +
TV VOL –
6 TV MUTE
7 TV INPUT
8 1-9, 0, +10
9 TITLE
0 PRESET/CH u
PRESET/CH d
PRESET/CH j
PRESET/CH i
SELECT
q RETURN
w ENTER
e MENU
r DISPLAY

ROCK

/DTS

DISC SKIP

AMP

VCR

JAZZ

AUDIO

DVD player

MUTE
HALL

*2
*2

TV channel up

TV channel down

*2
*2

TV volume up

TV volume down

TV mute

TV input

Numeric buttons

TV channel up

TV channel down

TV volume up

TV volume down

TV mute

TV input

Numeric buttons

TV mute

TV input

Preset stations (1-8)

Title
Up

VCR channel up

Preset up

Down

VCR channel down

Preset down

Left
Right
Select
Return
Title/Index

Enter

Menu
Display

Index

Menu
Display

A/B/C/D/E

Display

*1 This button functions only when the original remote control of the component has a POWER button.
*2 These buttons can operate your TV without switching the input if the remote control code is set in D-TV/CBL.
*3 These buttons can operate your VCR without switching the input to VCR if the remote control code is set in VCR.

49
01EN_47-50_HTR-5830_U.p65

12/16/04, 10:58 AM

SETTING THE SPEAKER LEVELS
Adjusting the speaker levels
during playback
You can adjust the output level of each speaker while
listening to sound playback.

Using the test tone
Use the test tone to set speaker levels so that the volume
from each speaker is identical when heard from your
listening position.
AMP

AMP

VOL

VOLUME

–

VOL

VOLUME

MUTE

INPUT

–

MUTE

INPUT

HALL

JAZZ

ROCK

ENTERTAINMENT

MUSIC

HALL

/DTS
9

TV THTR MOVIE1

/DTS

MOVIE2

NIGHT

6.1/5.1

STEREO

LEVEL

+10

ENTER

TITLE

LEVEL

SET MENU

TITLE

SELECT

–

2,5

TEST

ROCK

ENTERTAINMENT
4
MOVIE2

NIGHT

6.1/5.1

STEREO

+10

ENTER
SET MENU

SELECT

PRESET/CH

DISPLAY
PRESET/CH

Press AMP.

Press LEVEL repeatedly to select the
speaker you want to adjust.
The unit cycles through the speakers in the following
order each time you press LEVEL:
FRONT L→CENTER→FRONT R→
SUR R. (surround R)→SUR L. (surround L)→
SWFR (subwoofer)→.....

Press AMP.

Press TEST.
The unit will output a test tone.

Press u / d repeatedly to select a speaker
to adjust.
Each time you press d, the unit will cycle through
the speakers in the following order:
TEST LEFT (front L)→TEST CENTER (center)→
TEST RIGHT (front R)→TEST SUR.R (surround
R)→TEST SUR.L (surround L)→TEST
SUBWOOFER (subwoofer)→.....
(Press u to cycle the speakers in the reverse order.)

Press j / i to adjust the speaker output level.

Press TEST when you have completed your
adjustment.
The test tone halts.

• Pressing LEVEL once opens the level display. Press u / d at
this time to select a speaker.

Notes
• You cannot adjust speaker levels if the “SOUND 1 SPEAKER
SET” parameter in the set menu is set to NONE.
• You cannot adjust the subwoofer level if the “1D BASS”
parameter in “SOUND 1 SPEAKER SET” in the set menu is
set to FRNT.
• If you use LEVEL to adjust speaker levels, the speaker levels
you previously set with the test tone will also change.
• If you select “BASIC 1 SETUP” in the set menu and then
select “SET”, speaker levels change in response to any
changes you make in ”BASIC 1 SETUP”.

Press j / i to adjust the speaker output level.
• The center and surround speakers can be adjusted
by a maximum of –10dB ~ +10dB.
• The front speakers and subwoofer can be adjusted
by a maximum of –20dB ~ 0dB.

TEST

RETURN

DISPLAY

RETURN

JAZZ

TV THTR MOVIE1

A/B/C/D/E

–

–
MUTE

MUTE

MUSIC

Notes
• You cannot enter test mode if headphones are connected to the
PHONES jack. Remove the headphones from the PHONES
jack.
• You cannot adjust speaker volumes if the “SOUND 1
SPEAKER SET” parameter on the set menu is set to NONE.
• You cannot adjust the subwoofer level if the “1D BASS”
parameter in “SOUND 1 SPEAKER SET” in the set menu is
set to FRNT.
• If you select “BASIC 1 SETUP” in the set menu and then
select “SET”, speaker levels change in response to any
changes you make in “BASIC 1 SETUP”.

y
• Depending on the source the unit is reproducing, the speaker
levels set with the test tone may not be to your liking. If this is
the case, adjust the speaker levels while listening to the
source.

50
01EN_47-50_HTR-5830_U.p65

12/16/04, 10:58 AM

EDITING SOUND FIELD PARAMETERS
5

Changing parameter settings
The initial sound field program settings will provide you
with an excellent listening experience as they are. But you
can create an original listening environment by altering
some settings.

Note

Repeat steps 2 through 4 if you wish to alter
other parameters.

Note
• You cannot change parameter values when “OPTION 2 MEM.
GUARD” is set to “ON”. If you want to change the parameter
values, set “OPTION 2 MEM. GUARD” to “OFF” (see page
45).

• The editable parameters vary depending on the sound field
program you select. Refer to the explanation for the parameter.
AMP

VOL

VOLUME

–

MUTE

INPUT

HALL

JAZZ

ROCK

–

MUTE

1
MUSIC
5
/DTS

ENTERTAINMENT

TV THTR MOVIE1
7

NIGHT

6.1/5.1

STEREO

+10

ENTER

4
MOVIE2

LEVEL

SET MENU

TITLE

A/B/C/D/E

–

SELECT

TEST

DISPLAY

RETURN
PRESET/CH

Press AMP.
AMP

Select the sound field program you want to
adjust.
HALL

JAZZ

ROCK

MUSIC
5
/DTS
9

TV THTR MOVIE1

4
MOVIE2

NIGHT

6.1/5.1

STEREO

+10

ENTER

Press u / d to select the
parameters.

–

SELECT

ADDITIONAL
INFORMATION

ENTERTAINMENT

PRESET/CH

Press j / i to change the
parameter value.
–

SELECT

PRESET/CH

y
• If you press and hold to change the parameter value, the
front panel display automatically stops at the factory preset
parameter momently.

51
01EN_51-59_HTR-5830_U.p65

12/16/04, 10:58 AM

EDITING SOUND FIELD PARAMETERS

Sound field parameter descriptions
You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your
listening room. Not all of the following parameters are found in every program.

■ DSP LEVEL
Function:
Description:

This parameter adjusts the level of all the DSP effect sounds within a narrow range.
Depending on the acoustics of your listening room, you may want to increase or decrease the DSP
effect level relative to the level of the direct sound.
Control Range: –6 dB to +3 dB

■ DELAY
Function:

This parameter changes the apparent distance from the source sound by adjusting the delay between the
direct sound and the first reflection heard by the listener.
Description:
The smaller the value, the closer the sound source seems to the listener. The larger the value, the farther
it seems. For a small room, set to a small value. For a large room, set to a large value.
Control range: 1 – 99 msec

For 5ch Stereo
Function:
These parameters adjust the volume level for each channel in 5-channel stereo mode.
Control range: 0 to 100%

■ CT LEVEL (Center level)
■ SL LEVEL (Surround left level)
■ SR LEVEL (Surround right level)
For PRO LOGIC II Music
■ PANORAMA
Function:
Choices:

Extends the front stereo image to include the surround speakers for a wraparound effect.
OFF/ON, initial setting is OFF.

■ DIMENSION

Function:
Gradually adjusts the sound field either towards the front or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the front), initial setting is STD (standard).

■ CT WIDTH (Center width)
Function:

Adjusts the center image from all three front speakers to varying degrees. A larger value adjusts the
center image towards the front left and right speakers.
Control range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only
from front left and right speakers), initial setting is 3.

52
01EN_51-59_HTR-5830_U.p65

12/10/04, 0:33 PM

TROUBLESHOOTING
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed
below or if the instruction below does not help, set this unit to standby mode, disconnect the power cord, and contact the
nearest authorized YAMAHA dealer or service center.

■ General
Problem

This unit fails to turn
on when STANDBY/
ON (or SYSTEM
POWER) is pressed,
or enters in standby
mode soon after the
power has been
turned on.

Cause

Remedy

Refer to
page

The power cord is not connected or the
plug is not completely inserted.

Connect the power cord firmly.

The protection circuitry has been
activated.

Make sure all speaker wire connections on this unit
and on all speakers are secure and that the wire for
each connection is not touching anything other than
its respective connection.

16 – 17

This unit has been exposed to a strong
external electric shock (such as lightning
and strong static electricity).

Set this unit in standby mode, disconnect the power
cord, plug it back in after 30 seconds, then use it
normally.

–

Incorrect input or output cable connections.

Connect the cables properly. If the problem persists,
the cables may be defective.

9 – 17

No appropriate input source is selected.

Select an appropriate input source with INPUT l /
h or 6CH INPUT (or the input selector buttons).

The speaker connections are not secure.

Secure the connections.

The front speakers to be used have not
been selected properly.

Select the proper front speakers with SPEAKERS A/
B/OFF.

The volume is turned down.

Turn up the volume.

The sound is muted.

Press MUTE or any operation buttons of this unit to
cancel a mute and adjust the volume.

–

The signals this unit cannot reproduce are
being received from a source component
e.g.: a CD-ROM.

Play a source whose signals this unit can reproduce.

–

The protection circuitry has been
activated because of a short circuit, etc.

Check that the speaker wires are not touching each
other and then turn the unit back on.

–

The sleep timer has turned the unit off.

Turn on the power, and play the source again.

–

The sound is muted.

Press MUTE or any operation buttons on the unit to
cancel a mute and adjust the volume.

–

No sound / weak
sound from particular
speakers.

Incorrect cable connections.

Connect the cables properly. If the problem persists,
the cables may be defective.

No sound from the
effect speakers.

The sound effect is switched off.

Press STEREO to turn it on.

–

A Dolby Surround, Dolby Digital or DTS
decoding program is being used with
material not encoded with Dolby
Surround, Dolby Digital or DTS.

Select another sound field program.

No sound.

A digital signal with a sampling
frequency of greater than 48 kHz is input
to this unit.

16 – 17

ADDITIONAL
INFORMATION

The sound suddenly
goes off.

–

27 – 32

–

53
01EN_51-59_HTR-5830_U.p65

12/10/04, 0:33 PM

TROUBLESHOOTING

Problem

No sound from the
center speaker.

Cause

Remedy

The output level of the center speaker is
set to minimum.

Raise the level of the center speaker.

“SOUND 1A CENTER” on the set menu
is set to NONE.

Select the appropriate mode for your center speaker.

One of the HiFi DSP programs (1 to 4)
has been selected (except for 5ch Stereo).

Select another sound field program.

The source encoded with a Dolby Digital
or DTS signal does not have a center
channel signal.
No sound from the
surround speakers.

No sound from the
subwoofer.

27 – 32

–

The output level of the surround speakers
is set to minimum.

Raise the output level of the surround speakers.

A monaural source is being played with
program 9.

Select another sound field program.

“SOUND 1D BASS” on the set menu is
set to FRNT when a Dolby Digital or
DTS signal is being played.

Select SWFR or BOTH.

“SOUND 1D BASS” on the set menu is
set to SWFR or FRNT when a 2-channel
source is being played.

Select BOTH.

The source does not contain low bass
signals (90 Hz and below).
Poor bass
reproduction.

Refer to
page

27 – 32

–

“SOUND 1D BASS” on the set menu is
set to SWFR or BOTH and your system
does not include a subwoofer.

Select FRNT.

The speaker mode settings (front, center
or surround) on the set menu does not
match your speaker configuration.

Select the appropriate position for each speaker based
on the size of the speakers in your configuration.

A “humming” sound
can be heard.

Incorrect cable connections.

Firmly connect the audio plugs. If the problem
persists, the cables may be defective.

–

The volume level
cannot be increased,
or the sound is
distorted.

The component connected to the OUT
(REC) jacks of this unit is turned off.

Turn on the power to the component.

–

The sound effect
cannot be recorded.

It is not possible to record the sound
effect with a recording component.

The sound field
parameters and some
other settings on the
unit cannot be
changed.

“OPTION 2 MEM. GUARD” in the SET
MENU is set to ON.

Select OFF.

–

The unit does not
operate properly.

The internal microcomputer has been
frozen by an external electric shock (such
as lightning or excessive static electricity)
or by a power supply with low voltage.

Disconnect the AC power cord from the outlet and
then plug it in again after about 30 seconds.

–

“CHECK SP WIRES”
appears on the front
panel display.

The speaker cables are short circuited.

Make sure all speaker cables are connected correctly.

–

54
01EN_51-59_HTR-5830_U.p65

41 – 42

12/10/04, 0:33 PM

TROUBLESHOOTING

Problem

Cause

Remedy

Refer to
page

There is noise interference from digital or
radio frequency
equipment, or this unit.

This unit is too close to the digital or highfrequency equipment.

Move this unit further away from such
equipment.

–

The unit suddenly turns
into standby mode.

The internal temperature has become too
high and the overheat protection circuitry
has been activated.

Wait until the unit cools down and then turn it
back on.

–

■ Tuner
Problem

Cause

FM stereo reception is
noisy.

Refer to
page

Check the antenna connections.
Try using a high-quality directional FM
antenna.

Use the manual tuning method.

There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.

There is multipath interference.

Adjust the antenna position to eliminate
multipath interference.

–

The desired station
cannot be tuned in with
the automatic tuning
method.

The station is too weak.

Use a high-quality directional FM antenna.

–

Use the manual tuning method.

Previously preset
stations can no longer
be tuned in.

The unit has been disconnected for a
long period.

Preset the stations again.

The desired station
cannot be tuned in with
the automatic tuning
method.

The signal is weak or the antenna
connections are loose.

Tighten the AM loop antenna connections and
orient it for best reception.

–

Use the manual tuning method.

There are continuous
crackling and hissing
noises.

Noises result from lightning,
fluorescent lamps, motors, thermostats
and other electrical equipment.

Use an outdoor antenna and a ground wire.
This will help somewhat, but it is difficult to
eliminate all noise.

There are buzzing and
whining noises
(especially in the
evening).

A TV set is being used nearby.

Move this unit away from the TV.

–

ADDITIONAL
INFORMATION

The characteristics of FM stereo
broadcasts may cause this problem
when the transmitter is too far away or
the antenna input is poor.

Remedy

55
01EN_51-59_HTR-5830_U.p65

12/10/04, 0:33 PM

TROUBLESHOOTING

■ Remote control
Problem

Cause

The remote control does
not work nor function
properly.

Remedy

Wrong distance or angle.

The remote control will function within a
maximum range of 6 m (20 feet) and no more
than 30 degrees off-axis from the front panel.

Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.

Reposition this unit.

–

The batteries are weak.

Replace all batteries.

The remote control code has not correctly
set.

Set the remote control code correctly.

Try setting another code of the same
manufacturer.

Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.

–

56
01EN_51-59_HTR-5830_U.p65

Refer to
page

12/10/04, 0:33 PM

RESETTING THE FACTORY PRESETS
If you want to reset all of your unit's parameters for any
reason, do the following. This procedure completely
resets ALL parameters, including the SET MENU, level,
assign, and tuner presets.

Be sure this unit is in standby mode.
(U.S.A. model)
VOLUME

STANDBY
/ON

PRESET/TUNING

FM/AM

A/B/C/D/E

EDIT

PHONES

SPEAKERS

STEREO

PRESET/TUNING

MEMORY

TUNING MODE

SET MENU

MAN'L/AUTO FM

AUTO/MAN'L MONO

PROGRAM

A/B/OFF

INPUT
INPUT MODE

6CH INPUT

EFFECT

TONE CONTROL

BASS/TREBLE

SILENT CINEMA

STANDBY/ON

STEREO (EFFECT)

With the unit in standby mode, hold down
STEREO (EFFECT) on the front panel and
press STANDBY/ON.
“PRESET” appears in the front panel display.
If you are using Asia and General model, press
PROGRAM l / h to select “PRESET”.

y
• To cancel the initialization procedure without making any
changes, press STANDBY/ON.

Press STEREO (EFFECT) to select the
desired setting.
RESET
CANCEL

ADDITIONAL
INFORMATION

To reset the unit to its factory presets.
To cancel without making any changes.

Press STANDBY/ON to confirm your
selection.
If you selected "RESET", the unit is reset to its
factory presets and switches to standby mode.
If you selected "CANCEL", the unit switches to

57
01EN_51-59_HTR-5830_U.p65

12/16/04, 10:58 AM

GLOSSARY
■ CINEMA DSP

Since the Dolby Surround and DTS systems were
originally designed for use in movie theaters, their effect
is best felt in a theater having many speakers and
designed for acoustic effects. Since home conditions,
such as room size, wall material, number of speakers, and
so on, can differ so widely, it’s inevitable that there are
differences in the sound heard as well. Based on a wealth
of actually measured data, YAMAHA CINEMA DSP uses
YAMAHA original sound field technology to combine
Dolby Pro Logic, Dolby Digital and DTS systems to
provide the visual and audio experience of movie theater
in the listening room of your own home.

■ Dolby Digital

Dolby Digital is a digital surround sound system that
gives you completely independent multi-channel audio.
With 3 front channels (left, center, and right), and 2
surround stereo channels, Dolby Digital provides 5 fullrange audio channels. With an additional channel
especially for bass effects, called LFE (low frequency
effect), the system has a total of 5.1 channels (LFE is
counted as 0.1 channel).
By using 2-channel stereo for the surround speakers,
more accurate moving sound effects and surround sound
environment are possible than with Dolby Surround. The
wide dynamic range (from maximum to minimum
volume) reproduced by the 5 full-range channels and the
precise sound orientation generated using digital sound
processing provide listeners with previously unheard of
excitement and realism.
With this unit, any sound environment from monaural up
to a 5.1-channel configuration can be freely selected for
your enjoyment.

■ Dolby Pro Logic II

Dolby Pro Logic II is an improved technique used to
decode vast numbers of existing Dolby Surround
software. This new technology enables a discrete 5channel playback with 2 front left and right channels, 1
center channel, and 2 surround left and right channels
(instead of only 1 surround channel for conventional Pro
Logic technology). A music mode is also available for 2channel sources in addition to the movie mode.

■ Dolby Surround

Dolby Surround uses a 4 channel analog recording system
to reproduce realistic and dynamic sound effects: 2 front
left and right channels (stereo), a center channel for
dialog (monaural), and a surround channel for special
sound effects (monaural). The surround channel
reproduces sound within a narrow frequency range.
Dolby Surround is widely used with nearly all video tapes
and laser discs, and in many TV and cable broadcasts as
well. The Dolby Pro Logic decoder built into this unit
employs a digital signal processing system that
automatically stabilizes the volume on each channel to
enhance moving sound effects and directionality.

■ DTS (Digital Theater Systems) Digital
Surround
DTS digital surround was developed to replace the analog
soundtracks of movies with a 6-channel digital sound
track, and is now rapidly gaining popularity in movie
theaters around the world. Digital Theater Systems Inc.
has developed a home theater system so that you can
enjoy the depth of sound and natural spatial
representation of DTS digital surround in your home.
This system produces practically distortion-free 6-channel
sound (technically, a left, right and center channels, 2
surround channels, plus an LFE 0.1 channel as a
subwoofer, for a total of 5.1 channels).

■ ITU-R

ITU-R is the radio communication sector of the ITU
(International Telecommunication Union). ITU-R
recommends a standard speaker placement which is used
in many critical listening rooms, especially for mastering
purposes.

■ LFE 0.1 channel

This channel is for the reproduction of low bass signals.
The frequency range for this channel is 20 Hz to 120 Hz.
This channel is counted as 0.1 because it only enforces a
low frequency range compared to the full-range
reproduced by the other 5 channels in a Dolby Digital or
DTS 5.1 channel systems.

■ Matrix 6.1

The unit incorporates Matrix 6.1 decoder for Dolby
Digital and DTS multi-channel software that enables 6.1channel reproduction by adding the surround back
channel to existing 5.1-channel format. (The surround
back channel is created from surround left and right
channels, and outputted from virtual surround back
speaker.) With this additional channel, you can experience
more dynamic and realistic moving sound especially with
scenes with “fly-over ” and “fly-around ” effects.

■ PCM (Linear PCM)

Linear PCM is a signal format under which an analog
audio signal is digitized, recorded and transmitted without
using any compression. This is used as a method of
recording CDs and DVD audio. The PCM system uses a
technique for sampling the size of the analog signal per
very small unit of time. Standing for “pulse code
modulation”, the analog signal is encoded as pulses and
then modulated for recording.

58
01EN_51-59_HTR-5830_U.p65

12/16/04, 10:58 AM

GLOSSARY

■ Sampling frequency and number of
quantized bits
When digitizing an analog audio signal, the number of
times the signal is sampled per second is called the
sampling frequency, while the degree of fineness when
converting the sound level into a numeric value is called
the number of quantized bits.
The range of rates that can be played back is determined
based on the sampling rate, while the dynamic range
representing the sound level difference is determined by
the number of quantized bits. In principle, the higher the
sampling frequency, the wider the range of frequencies
that can be played back, and the higher the number of
quantized bits, the more finely the sound level can be
reproduced.

■ SILENT CINEMA

YAMAHA has developed a natural, realistic sound effect
DSP algorithm for headphones.
Parameters for headphones have been set for each sound
field so that accurate representations of all the sound field
programs can be enjoyed using headphones.

■ Virtual CINEMA DSP

YAMAHA has developed a virtual CINEMA DSP
algorithm that allows you to enjoy DSP sound field
surround effects even without any surround speakers by
using virtual surround speakers.
It is even possible to enjoy virtual CINEMA DSP using a
minimal 2-speaker system that does not include a center
speaker.

ADDITIONAL
INFORMATION

59
01EN_51-59_HTR-5830_U.p65

12/16/04, 10:58 AM

SPECIFICATIONS
AUDIO SECTION

FM SECTION

• Minimum RMS Output Power for Front, Center, Surround
1 kHz, 0.9% THD, 6 Ω/8 Ω ................................................ 110 W

• Tuning Range
[U.S.A. and Canada models] ............................ 87.5 to 107.9 MHz
[Other models] .............................................. 87.50 to 108.00 MHz

• DIN Standard Output Power
[Europe model]
1 kHz, 0.7% THD, 4 Ω ........................................................ 105 W
• Maximum Power
[China, Korea and General models]
1 kHz, 10% THD, 6 Ω ......................................................... 110 W
• Dynamic Power
[U.S.A. and Canada models] (Impedance Selector: 8 Ω)
(IHF, 8/6/4/2 Ω) ........................................... 120/140/160/180 W
[Other models]
(IHF, 6/4/2 Ω) ..................................................... 105/135/165 W
• Frequency Response
CD, etc. to Front L/R .............................. 10 Hz to 100 kHz, –3 dB
• Total Harmonic Distortion
1 kHz, 50 W, 6 Ω, Front L/R ................................................ 0.06%
• Signal to Noise Ratio (IHF-A Network)
CD (250 mV, shorted) to Front L/R, Effect Off ............. h100 dB
• Residual Noise (IHF-A Network)
Front L/R ................................................................ 150 µV or less
• Channel Separation (1 kHz/10 kHz)
CD, etc. (5.1 kΩ terminated) to Front L/R ........ h60 dB/h45 dB
• Tone Control (Front L/R)
BASS Boost/Cut .................................................... ±10 dB/100 Hz
TREBLE Boost/Cut ............................................... ±10 dB/20 kHz
• Phones Output ........................................................... 400 mV/470 Ω
• Input Sensitivity
CD, etc. ................................................................... 200 mV/47 kΩ
6CH INPUT ............................................................ 200 mV/47 kΩ
• Output Level
OUT (REC) ........................................................... 200 mV/1.2 kΩ
OUTPUT SUBWOOFER ............................................. 4 V/1.2 kΩ

• 50 dB Quieting Sensitivity (IHF, 100% mod.)
Mono ................................................................. 2.8 µV (20.2 dBf)
• Signal to Noise Ratio (IHF)
Mono/Stereo .............................................................. 73 dB/70 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo ................................................................. 0.5%/0.5%

AM SECTION
• Tuning Range ......................................... 530/531 to 1710/1611 kHz

GENERAL
• Power Supply
[U.S.A. and Canada models] ............................... AC 120 V/60 Hz
[Australia model] ................................................. AC 240 V/50 Hz
[U.K. and Europe models] ................................... AC 230 V/50 Hz
[Korea model] ...................................................... AC 220 V/60 Hz
[China model] ...................................................... AC 220 V/50 Hz
[Asia and General models] ... AC 110-120 V/220-240 V, 50/60 Hz
• Power Consumption
[U.S.A. and Canada models] .................................. 240 W/320 VA
[Other models] ..................................................................... 240 W
• Standby Power Consumption
[U.S.A. and Canada models] ................................................ 0.5 W
[Other models] ...................................................................... 0.7 W
• Dimensions (W x H x D) .................................. 435 x 151 x 315 mm
(17-1/8” x 5-15/16” x 12-7/16”)
• Weight ................................................................. 9 kg (19 lbs 13 oz)

*Specifications are subject to change without notice.

VIDEO SECTION
• Video Signal Type ...................................................... NTSC or PAL
• Composite Signal Level ................................................ 1 Vp-p/75 Ω
• Signal to Noise Ratio ........................................................... h50 dB
• Frequency Response (MONITOR OUT)
Video Signal ............................................. 5 Hz to 10 MHz, –3 dB
Composite Signal ..................................... 5 Hz to 60 MHz, –3 dB

60
01EN_51-59_HTR-5830_U.p65

12/16/04, 3:21 PM

LIST OF REMOTE CONTROL CODES
TV
Admiral
Aiwa
Akai
Alba
AOC
Bell&Howell
Bestar
Blaupunkt
Blue sky
Brandt
Brocsonic
Bush
Clatronic
Craig
Croslex
Curtis Mathis
Daewoo
Daytron
Dual
Emerson
Ferguson
First line
Funai
Fisher
Fraba
GE
LG/Goldstar
Goodmans
Grundig
Hitachi
ICE
Irradio
Itt/Nokia
JC Penny
JVC
Kendo
KTV
Loewe
LXI
Magnavox
Matsui
Mitsubishi
NEC
Nokia
Nokia Oceanic
Nordmende
Onwa
Panasonic
Philco
Philips
Pioneer
Portland
Quasar
Radio Shack
RCA
SABA
Samsung
Sanyo
Schneider
Scott
Sharp
Siemens
Signature
Sony
Sylvania
Telefunken

01_remocode_HTR-5830_U.p65

292
294
295
296
297
292
298
229
298
223
297
296
298
224
225
297
297
239
298
297
223
298
277
295
298
293
297
296
229
297
296
296
244
293
296
298
297
298
293
297
295
299
297
244
245
265
296
234
297
225
226
297
234
299
293
223
297
295
296
297
292
229
292
263
297
269

293
276 283 284
296

222

226
298 224 227 228
224 239 232
265 266
278
233
297
298
298
238
239

234 235 236
239 237
223
249
242 243 285

245
297 234 237
246 247 286
239
248
297 225 226 233
225 239
297 259 287
252 282
245
266
235 236 253 288 211
225 239
235
256
235
293
297
269
239
233

254 255 268
297
234
265
248
279

256 257 258
266
262 275
272 273 274 212

239 232 213
214
225
264 265 266

Thomson
Toshiba
Videch
Wards
Yamaha

223
292
297
297
299

266
226 267 215
242
239 232
292

VCR
Admiral
Aiwa
Akai
Audio Dynamic
Bell&Howell
Blaupunkt
Brocsonic
Bush
Canon
CGM
Citizen
Craig
Curtis Mathis
Daewoo
DBX
Dimensia
Emerson
Fisher
Funai
GE
LG/Goldstar
Goodmans
Grundig
Hitachi
Instant Replay
Itt/Nokia
JC Penny
JVC
Kendo
Kenwood
Loewe
Luxor
LXI
Magnavox
Marantz
Marta
Matsui
Memorex
Minolta
Mitsubishi
Multitech
NEC
Nokia
Nokia Oceanic
Okano
Olympic
Orion
Panasonic
Pentax
Philco
Philips
Phonola
Pioneer
Quasar
RCA/Proscan
Realistic
Samsung
Sansui
Sanyo
Schneider
Scott
Seleco

395
396
322
392
393
325
327
322
325
396
396
396
397
328
392
333
327
393
397
328
396
334
332
325
325
393
392
392
396
392
396
395
393
325
392
396
396
328
333
399
397
392
393
395
323
325
327
325
333
325
325
337
325
325
325
393
354
394
393
337
399
322

397 398 329
323 324
394
326
328
332
328 333
334 335
394
334
336
333 387
388
337
338
333 349 342 343
328
393 394 328 333 349
394 344 345 346 347
394 396
337
396 397 336 349
326 328
394
336
349
344 348 359 352 353
348 354
394 344 383
395
328
328 355 378 384 385 386
349
328
326 328 337 356 357
328
326 328 333 335 349 358 369
397 328 336 359 362
358 363 364 365 366
336 367
335 336 348 359 352 354 358

12/16/04, 10:58 AM

Sharp
Siemens
Signature 2000
Sony
Sylvania
Symphonic
Tandberg
Tashiro
Tatung
Teac
Technics
Telefunken
Thorn
Toshiba
Universum
W.WHouse
Wards
Yamaha

395
393
395
368
397
397
334
396
392
392
325
376
393
335
396
396
395
399

362 382
397
379 372 373 374 375
325 326 328

394
394 397
328
377
396
369 389
327 376
396 336 362
392 393 394

DVD player
Denon
Funai
Hitachi
JVC
Kenwood
Mitsubishi
Onkyo
Panasonic
Philips
Pioneer
RCA
Samsung
Sharp
Sony
Toshiba
LG/Goldstar
Thomson
Yamaha

623
625
626
627
628
629
632
623
699
636
639
642
643
644
634
645
646
699

624

633 634
635
647
637 638

622 623 647

MD Recorder
Yamaha

599

CD player
Yamaha

199

CD Recorder
Yamaha

01_remocode_HTR-5830_U.p65

499

12/16/04, 10:58 AM

HTR-5830
AV Receiver

00_cover_HTR-5830_U.p65

OWNER’S MANUAL
Printed in China

WE59680

12/16/04, 10:38 AM

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Page Count                      : 67
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:88e8affb-b734-11d9-85e3-003065b8caf8
Producer                        : Acrobat Distiller 4.0.5  for Macintosh
Create Date                     : 2004:12:10 12:36:54Z
Modify Date                     : 2005:04:27 08:53:44-07:00
Metadata Date                   : 2005:04:27 08:53:44-07:00
Creator Tool                    : PageMaker 6.5
Document ID                     : uuid:04eed7f2-b733-11d9-85e3-003065b8caf8
Format                          : application/pdf
Creator                         : H-05 Mac
Title                           : 01EN_00_Cau_HTR-5830_U.p65
Author                          : H-05 Mac

EXIF Metadata provided by EXIF.tools

Yamaha Htr 5830 Owners Manual 01EN_00_Cau_HTR 5830_U.p65

HTR-5830 to the manual 1ef65e28-0c01-4850-a7b1-4be593c5be5f

Navigation menu

Versions of this User Manual:

Views

Navigation