Yamaha NP S303 Firmware Update Installation Manual NPS303

[54KB] NPS303 Firmware Update Installation Manual Manual Library - Yamaha - United States

User Manual: Yamaha NP-S303 Firmware Update Installation Manual

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadYamaha NP-S303 Firmware Update Installation Manual NPS303
Open PDF In BrowserView PDF
Manual Development Group
© 2017 Yamaha Corporation

EN

Published 08/2017 IP-A0

AV17-0050

Update Guide
This guide explains how to update the firmware in the NP-S303 Network Player using a
USB storage device. If the unit is connected to the Internet, you can download the
latest firmware via the network and update the unit. For detailed steps, refer to the
Owner’s Manual.
For information on the improvements and additional features introduced by the
firmware update, refer to the product page for this unit on Yamaha’s website.

Requirements for updating the firmware

Updating the unit’s firmware
You can update the firmware using the front panel.
NOTICE
• Do not turn off the power to the unit during the update. Doing so may prevent the unit from starting
up.

• Use a USB storage device that satisfies the following requirements:
– Supports Mass Storage Class
– Features FAT16 or FAT32 format
– Does not feature the encryption function
– Contains no data (content is empty)

SELECT
ENTER

SOURCE

PUSH

RETURN

Wi Fi

• Use the firmware data downloaded from Yamaha’s website.

CONNECT

5V

Preparing the firmware

1

BLUETOOTH

USB

z (power)

A

USB jack

SOURCE

Jog dial

RETURN

Download the latest firmware for the unit from Yamaha’s website.
For more information, refer to the product page for this unit on Yamaha’s website.

2

Expand the downloaded compressed file, and then save the firmware
data file “Y0091-xxxx.bin” to the USB storage device.
Save the file in a folder at the highest level of the hierarchy (root folder) on the USB
storage device. Do not change the file name.

1
2
3

Press z (power) to turn the power off.
Insert the USB storage device into the USB jack.
While pressing and holding down RETURN, press z (power).
“ADVANCED SETUP” appears on the display.

4
5

Rotate the jog dial to select “UPDATE · · · · USB”.

Viewing the firmware version

Press SOURCE.

You can view the firmware version after the update is complete.

The firmware update starts. Do not turn off the power to the unit during the update.

Turn on the power to the unit, and then press SETUP on the remote control. Use the
cursor keys (///) to select “Network”, “Update (Network Update)”, and then
“Version” to display the current firmware version.

6

When “UPDATE SUCCESS” appears on the display, press z (power)
to turn off the power to the unit.

7

Remove the USB storage device from the USB jack.
The firmware update is complete.
NOTE
• Wait about five seconds after the firmware update is complete, and then turn on the power to
the unit.

In case of an error
If an error message appears on the display during the update operation, the firmware
will not be updated correctly. Determine the cause, and try to update the firmware
again.
Cause

Solution

The USB storage device may not be
properly connected to the USB jack.

Make sure that the USB storage device is connected
properly. Then try to update the firmware again.

The firmware data file may not have been
stored in the USB storage device
properly.

Make sure that the file has been stored in the folder on
the highest hierarchy (root folder) of the USB storage
device.

The USB storage device may be
protected by a password or other
methods.

Use a USB storage device that is not protected by a
password or other method.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2017:07:25 11:16:03+09:00
Modify Date                     : 2017:07:31 14:10:11+09:00
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Metadata Date                   : 2017:07:31 14:10:11+09:00
Format                          : application/pdf
Document ID                     : uuid:8a51fdc5-98f0-46e0-87a9-544b596e9cd0
Instance ID                     : uuid:e884b155-f189-48b6-aa4b-6f14bad22559
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 2
EXIF Metadata provided by EXIF.tools

Navigation menu