Yamaha NXB02A Bluetooth Speaker System User Manual En NX B02 UB
Yamaha Corporation Bluetooth Speaker System En NX B02 UB
Yamaha >
User Manual
• Explanation of Graphical Symbols
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use this apparatus near water.
6Clean only with dry cloth.
7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13 Unplug this apparatus during lightning storms or when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
distortion - and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is
often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group
recommend you to avoid prolonged exposure from excessive volume levels. Operate this unit by the following
procedure.
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party: Yamaha Electronics Corporation, U.S.A.
Address: 6660 Orangethorpe Avenue
Buena Park, CA 90620
Telephone: 714-522-9105
Fax: 714-670-0108
Type of Equipment
: BLUETOOTH WIRELESS SPEAKER SYSTEM
Model Name: NX-B02
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference, including interference that may cause undesired operation of this device.
See user manual instructions if interference to radio reception is suspected.
To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.
1 Install this unit in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or
cold. (Do not use/keep this unit in a car etc.)
2 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.
3 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity
(i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit,
and/or personal injury.
4 Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing.
On the top of this unit, do NOT place:
- Other components, as they may cause damage and/or discoloration on the surface of this unit.
- Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.
- Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.
5 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit
rises, it may cause fire, damage to this unit, and/or personal injury.
6 Do not plug this unit into an AC wall outlet until all connections are complete.
7 Do not operate this unit upside-down. They may overheat, possibly causing damage.
8 Do not use force on switches, knobs, and/or cords.
9 When disconnecting the AC adaptor from the wall outlet, grasp the AC adaptor; do not pull the cord.
10 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.
11 Only the voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause
fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with
a voltage other than that specified.
12 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should
never be opened for any reason.
13 When not planning to use this unit for long periods of time (i.e. when going on vacation), disconnect the AC adaptor from the AC wall
outlet.
14 Be sure to read the “Troubleshooting” section regarding common operating errors before concluding that the unit is faulty.
15 Before moving this unit, press power to set this unit to off, and disconnect the AC adaptor from the wall outlet.
16 Be sure to use the AC adaptor supplied with this unit. Using an AC adaptor other than the one provided may cause fire or damage to this
unit.
17 Install this unit near the wall outlet and where the AC adaptor can be reached easily.
18 For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug
it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.
19 The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
■Special Instructions for U.K. Model
Thank you for selecting this Yamaha product.
Choose one of the two ways of the power supplies and the audio inputs according to your usage circumstances.
1When using AC Adaptor
2When using batteries
BLUETOOTH WIRELESS SPEAKER SYSTEM
NX-B02 OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT
Please record the serial number of this unit in the space below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.
Caution: Read this before operating your unit.
CAUTION
RISK OF ELECTRIC SHOCK DO
NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert you to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert you to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
FCC INFORMATION (for US customers)
1IMPORTANT NOTICE : DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void
your authority, granted by the FCC, to use the product.
2IMPORTANT : When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product MUST be
used. Follow all installation instructions. Failure to follow
instructions could void your FCC authorization to use this
product in the USA.
3NOTE : This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15 for
Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance that
your use of this product in a residential environment will not
result in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found in the users
manual, may cause interference harmful to the operation of other
electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product is
found to be the source of interference, which can be determined by
turning the unit “OFF” and “ON”, please try to eliminate the
problem by using one of the following measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit breaker or
fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type of
product. If you can not locate the appropriate retailer, please
contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe
Ave, Buena Park, CA 90620.
The above statements apply ONLY to those products distributed by
Yamaha Corporation of America or its subsidiaries.
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in
your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which
is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of the three pin plug.
This equipment compiles with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency
(RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very
low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should
be installed and operated with at least 20 cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and
ankles).
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This unit features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color.
Should this happen, move this unit away from the TV set.
FOR CANADIAN CUSTOMERS
This Class B digital apparatus complies with Canadian ICES-003.
FCC WARNING
Change or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Introduction
Controls and functions
Connections
Power supplies
◆2 way power supply
You can choose one of two power supplies according to
your usage circumstances: AC adaptor or batteries.
◆The Bluetooth wireless technology
By the bluetooth technology, enjoy clear sound with
wireless easily.
◆Real stereo sound
The high quality amplifier, titanium diaphragm and
Yamaha’s unique SR-BASS technology achieve high
quality sound.
◆PowerStorage™ circuit (High 20 W power)
Yamaha’s original power technology enables an
impressive 20 W output (Max. Instantaneous Power).
■Supplied accessories
AC adaptor (DC 12 V, 1 A) .............................................. 1
The shape of the adaptor may vary depending on the area
where you purchased.
China model ................................... MU12-2120100-A2
Europe model ................................. MU12-2120100-C5
Korea model ................................... MU12-2120100-C4
U.K. model ..................................... MU12-2120100-B2
1
Status indicator (LED)
Indicates the current status of this unit. For details, refer
to “About the status indicator (LED)” on page 2.
2 (Bluetooth/Mute button)
Sets this unit to pairing mode to use Bluetooth
connection or mutes the sound. To cancel the mute,
press again or / . The status indicator flashes
during mute.
3 (Power button)
Turns this unit on. Press again to turn this unit off.
When this unit is on, the power indicator lights up in
green.
4/ (Volume buttons)
Ad
j
ust the volume level. Press to increase the volume
34
12
1 Connect the supplied AC adaptor to DC IN
12V terminal at the back of this unit.
2 Plug the AC adaptor to the AC wall outlet.
To AC wall outlet
AC adaptor
(supplied)
DC IN 12V terminal
1 Open the battery compartment cover on
the bottom of this unit.
2 Insert the 4 commercially available
batteries (AA, R6, UM-3) according to the
polarity markings (+ and –) on the inside
of the battery compartment.
3 Close the battery compartment cover.
Bottom view
English
Printed in China WM62610
UB
En_NX-B02_UB.fm Page 1 Tuesday, August 7, 2007 6:39 PM
#
©
2007 All rights reserved.
YAMAHA ELECTRONICS CORPORATION, USA
6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD.
135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H.
SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A.
RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD.
YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B.
J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD.
17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
1When using Bluetooth connection
2When using analog input
■About the status indicator (LED)
1 Press and hold , and , and then press to turn this unit on.
The status indicator (LED) flashes in blue.
2 Press .
This unit clears the pairing data.
When clearing finished, the status indicator (LED) lights up in green.
If the problem you are experiencing is not listed below, set this unit to off, disconnect the power, and contact the nearest
authorized Yamaha dealer or service centre.
General
When using the Bluetooth connection
Bluetooth®
• Bluetooth is a technology for wireless communication between devices within an area of about 10 meters (33 ft)
employing the
2.4 GHz frequency band, a band which can be used without a license.
• Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license agreement.
“Swing Radiator Bass™” is a trademark of YAMAHA CORPORATION.
PowerStorage™
“PowerStrage™” is a trademark of YAMAHA CORPORATION.
■Handling Bluetooth communications
• The 2.4 GHz band used by Bluetooth compatible devices is a radio band shared by many types of equipment.
While Bluetooth compatible devices use a technology minimizing the influence of other components using the same
radio band, such influence may reduce the speed or distance of communications and in some cases interrupt
communications.
• The speed of signal transfer and the distance at which communication is possible differs according to the distance
between the communicating devices, the presence of obstacles, radio wave conditions and the type of equipment.
Audio inputs
Using this unit
LED status The current status of this unit
Lit in green This unit is on and playbacks your portable audio player.
Lit in blue This unit is on and playbacks your Bluetooth component.
Flashing This unit is muted or in pairing mode.
Flashes once The volume of this unit is the maximum or minimum.
Off This unit is off, or power supply is not connected.
Clearing the pairing data
•
When the status indicator (LED) does not light even
though is pressed, change all batteries.
•
Do not use old batteries and a new ones together.
•
Do not use different types of batteries (such as alkaline
and manganese batteries) together. Read the packaging
carefully because some batteries may be different type
even they have the same shape and color.
•W
h
en not p
l
ann
i
ng to use t
hi
s un
i
t
f
or
l
ong per
i
o
d
s o
f
time (for more than 1 month), remove the batteries from
this unit.
• If the batteries have leaked, dispose of them immediately.
Avoid touching the leaked material or letting it come into
contact with clothing, etc. Clean the battery compartment
thoroughly before installing new batteries.
• Do not throw away batteries with general house waste;
dispose of them correctly in accordance with your local
regulations.
Notes
W
hen using Bluetooth, you need to do “pairing”. “Pairing”
r
efers to the operation of registering mobile telephones, etc.,
f
or Bluetooth communications (hereafter referred to as
“
other components”). Use the procedure described below to
p
air.
y
•
Pairing requires operations on this unit and on the other
component with which Bluetooth communications are to
be established. If necessary, refer to the other
component’s operating instructions.
•
To ensure security, a time limit of 8 minutes is set for the
pairing operation. You are recommended to read and
fully understand all the instructions before starting.
1
Turn on the power of the component you
want to pair with.
2
Press to turn this unit on.
3
Press and hold for more than 4
seconds.
This device is set to the pairing mode (the status
indicator flashes in blue) and your component detects
this unit.
4 Select “NX-B02 YAMAHA” or this unit’s
address from the list of the other
component.
The address is indicated on the rear panel of this unit (00
A0 DE 01 xx xx, where “x” is a number from 0 to 9 or a
letter from A to F).
5 If you are asked to input a passkey, input
the number “0000”.
The status indicator flashes quickly, indicating that the
pairing process on this unit has been completed. Check
that the pairing process on the other component has also
been completed. If the status indicator does not flash
quickly or if the pairing process on the other component
fails, start over from step 3.
• During Bluetooth communications between this unit and
the other component, the pairing mode is not set even
though is pressed. Likewise, Bluetooth
communications with other components are not possible
while in the pairing mode. If the pairing mode is set
accidentally, press shortly to cancel the pairing mode.
• This unit can be paired with up to eight other
components. When pairing is conducted successfully
with a ninth component and the pairing data is registered,
the pairing data for the least recently used other
component is cleared.
• If the power supply to this unit is cut off during the
pairing operation, the pairing data may be damaged. If so,
perform the procedure described at “Clearing the pairing
data” on page 2 and then perform pairing again.
Notes
Connect an audio output jack of your
portable audio player and the PORTABLE IN
jack of this unit using the commercially
available 3.5 mm stereo mini plug cable.
Before connecting, make sure that this unit is turned off.
Commercially available 3.5 mm
stereo mini plug cable
PORTABLE IN jack
Notes
1
Press to turn this unit on.
The status indicator (LED) lights up in green.
2
Start playback of your Bluetooth device
or portable audio player.
3
Adjust the volume level using / .
D
uring playback, the Bluetooth connection takes priority
o
ver the analog connection.
y
This unit is a stereo speaker. To enjoy
the fine sound balance between right
and left, face the Yamaha logo to the
listening position.
■After using this unit
1 Stop playback of your Bluetooth
component or portable audio player.
2 Press to turn this unit off.
The status indicator (LED) turns off.
Note
Troubleshooting
Problem Cause Remedy
No sound. The connection between this unit and the
other component is not correct.
Connect the cable properly.
The volume is set to the minimum. Increase the volume level.
This unit is muted. Cancel the mute.
The volume level is
unstable.
The limiter control has been activated
due to excessive input.
Decrease the volume level.
Problem Cause Remedy
Cannot make this unit
paired with the other
component.
The other component is not accepted by
this unit.
Check that your component is acceptable
with this unit.
Wrong distance. Reposition this unit within 10 m (33 ft)
range from the other component.
There is a device (microwave oven,
wireless LAN, etc.) outputs signals in the
2.4 GHz frequency band nearby.
Reposition this unit.
AC adaptor is not connected correctly. Connect or AC adaptor correctly.
The power of the connected component is
off.
Turn on the connected component.
The other component does not support
A2DP.
Perform the pairing operation with the
component which supports A2DP.
No sound is produced,
the sound stops or is
interrupted during
playback.
The other component is not connected to
this unit by Bluetooth.
If Bluetooth communications have
dropped, reconnect.
Wrong distance. Reposition this unit within 10 m (33 ft)
range from the other component.
There is a device (microwave oven,
wireless LAN, etc.) outputs signals in the
2.4 GHz frequency band nearby.
Reposition this unit.
The other component’s Bluetooth
function is not enabled.
Check that the Bluetooth function of the
other component is set properly.
This unit is not registered on the other
component’s Bluetooth device list.
Perform the pairing operation again.
The other component is not set to send
Bluetooth audio signals to this unit.
Check that the Bluetooth function of the
other component is set properly.
The output setting of the other
component is not set to this unit.
Set the output setting of the other
component to this unit.
The other component’s volume is set to
the minimum.
Increase the volume level.
Specifications
S
peaker type
.
.................... 1-box stereo, Yamaha SR-BASS Technology
D
river ........................ 45 mm Ti-cone full-range driver x 2
I
nput (Analog) ............................. 3.5 mm Stereo mini jack
B
luetooth ................. Ver. 2.0+EDR Support A2DP profile
D
ynamic power ................................. 6 W x 2 (1 kHz, 6 Ω)
M
ax. instantaneous power*
.
...................................... 10 W x 2 (1 kHz, 6 Ω, 10% THD)
I
nput sensitivity/Impedance
Analog input ........................................... 200 mV/20 kΩ
M
aximum input signal
Analog input .......................................................... 2.0 V
F
requency response .................................. 90 Hz to 20 kHz
Power supply
AC adaptor ...................................................... 12 V/1
A
Battery .............................................. AA, R6, UM-3 x
4
AC to DC adaptor specification
Input ......................................................AC 100 to 240
V
Safety standard............. PSE, C-UL, TUV-GS, CCC, E
K
Output .........................................................12 V DC/1
A
Power consumption ..................................................... 8
W
Dimensions (W x H x D) ........................ 84 x 170 x 84 m
m
(3-5/16” x 6-11/16” x 3-5/16”
)
Weight .................................................... 600 g (1 lbs. 5 oz.
)
*Refers to the power that can be output for 100 ms
continuously.
Please note that all specifications are subject to change
without notice.
Limited Guarantee for European Economic Area (EEA) and Switzerland
Thank you for having chosen a Yamaha product. In the unlikely event that your Yamaha product needs guarantee service, please contact the dealer from whom it was
purchased. If you experience any difficulty, please contact Yamaha representative office in your country. You can find full details on our website (http://
www.yamaha-hifi.com/ or http://www.yamaha-uk.com/ for U.K. resident).
The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original purchase. Yamaha undertakes,
subject to the conditions listed below, to have the faulty product or any part(s) repaired, or replaced at Yamaha’s discretion, without any charge for parts or labour.
Yamaha reserves the right to replace a product with that of a similar kind and/or value and condition, where a model has been discontinued or is considered
uneconomic to repair.
Conditions
1. The original invoice or sales receipt (showing date of purchase, product code and dealer’s name) MUST accompany the defective product, along with a
statement detailing the fault. In the absence of this clear proof of purchase, Yamaha reserves the right to refuse to provide free of charge service and the product
may be returned at the customer’s expense.
2. The product MUST have been purchased from an AUTHORISED Yamaha dealer within the European Economic Area (EEA) or Switzerland.
3. The product must not have been the subject of any modifications or alterations, unless authorised in writing by Yamaha.
4. The following are excluded from this guarantee:
a. Periodic maintenance and repair or replacement of parts due to normal wear and tear.
b. Damage resulting from:
(1) Repairs performed by the customer himself or by an unauthorised third party.
(2) Inadequate packaging or mishandling, when the product is in transit from the customer. Please note that it is the customer’s responsibility to ensure the
product is adequately packaged when returning the product for repair.
(3) Misuse, including but not limited to (a) failure to use the product for its normal purpose or in accordance with Yamaha’s instructions on the proper use,
maintenance and storage, and (b) installation or use of the product in a manner inconsistent with the technical or safety standards in force in the country
where it is used.
(4) Accidents, lightning, water, fire, improper ventilation, battery leakage or any cause beyond Yamaha’s control.
(5) Defects of the system into which this product is incorporated and/or incompatibility with third party products.
(6) Use of a product imported into the EEA and/or Switzerland, not by Yamaha, where that product does not conform to the technical or safety standards of
the country of use and/or to the standard specification of a product sold by Yamaha in the EEA and/or Switzerland.
(7) Non AV (Audio Visual) related products.
(Products subject to “Yamaha AV Guarantee Statement” are defined in our website at http://www.yamaha-hifi.com/ or
http://www.yamaha-uk.com/ for U.K. resident.)
8. Where the guarantee differs between the country of purchase and the country of use of the product, the guarantee of the country of use shall apply.
9. Yamaha may not be held responsible for any losses or damages, whether direct, consequential or otherwise, save for the repair or replacement of the product.
10. Please backup any custom settings or data, as Yamaha may not be held responsible for any alteration or loss to such settings or data.
11. This guarantee does not affect the consumer’s statutory rights under applicable national laws in force or the consumer’s rights against the dealer arising from
their sales/purchase contract.
En_NX-B02_UB.fm Page 2 Tuesday, August 7, 2007 6:39 PM