Yamaha Pad Module Compatibility Table Pad/Module 2 (la) En

User Manual: Yamaha Pad/Module Compatibility Table 2 (la)

Open the PDF directly: View PDF .
Page Count: 1

English

Pad Module Compatibility Table

Last updated:

1[VI] ●●○-●○--○ ○ ○ ○ [II] ●[II] ●[II] ○---○○-

2/3-6/7, 12/13 *j *l ○○○-○○--○ ○○○ ○○○--- *l ○-

8●●○-●○--○ ○ ○ ○ [V] ●[V] ●[II] ○---○○-

9,10 ●●○-●○--○ ○ ○ ○ [II] ●[II] ●[II] ○---○○-

11 ●●○-●○--○ ○ ○ ○ [II] ●[II] ●[II] ○--●○○-

14 ○●●○-● ○ --○○○○○●[II] ●[II] ●[II] ○---○○-

SNARE -●*g ●*g ○*g ●*g ●*g ○*g ●*g ○*g ○*g -○*g ○*g ○*g -○*g ○*g ○*g ○*g ○*g --- *n

KICK/PAD *j -○*h ○*h ○[III]*h ○*h ○*h ○*h ○*h ○*h ○*h -○*h ○*h ○*h -○*h ○*h ○*h ○*h ○*h --- *n

CRASH -○*h ○*h ○[III]*h ○*h ○*h ○*h ○*h ○*h ○*h -○*h ○*h ○*h -○[II]*h ○[II]*h ○*h ○[II]*h ○*h --- *n

HI-HAT -○*h ○*h ○[III]*h ○*h ○*h ○*h ○*h ○*h ○*h -○*h ○*h ○*h -○*h ○*h ○*h ○*h ○*h ○*h - - *n

Others -○*h ○*h ○[III]*h ○*h ○*h ○*h ○*h ○*h ○*h -○*h ○*h ○*h -○*h ○*h ○*h ○*h ○*h --- *n

1/2, 3/4 -○○○○○○○○○-○○○*k -○○○○○-*l ○*n

5, 6 -●●○●●○●○○-○○○*k -●[II] ●[II] ○ ● [II] ○-○ ○ *n

1-●[I] ● ○ ●[I] ●○●○○-○ ○ *k ○*k -●[II] ●[II] ○ ● [II] ○-○*m ○*m -

2/10-4/12, 7/8 *j -○○○○○○○○○-○ ○ *k ○*k -○○○○○-*m ○*m -

5, 6 -●●○●●○●○○-○ ○ *k ○*k -●[II] ●[II] ○ ● [II] ○-○*m ○*m -

9-●●○●●○●○○-○ ○ *k ○*k -●[II] ●[II] ○ ● [II] ○●○*m ○*m -

SNARE -●*g ●*g ○*g ●*g ●*g ○*g ●*g ○*g ○*g -○*g ○*g ○*g -○*g ○*g ○*g ○*g ○*g --- *n

KICK/PAD *j -○*h ○*h ○[III]*h ○*h ○*h ○*h ○*h ○*h ○*h -○*h ○*h ○*h -○*h ○*h ○*h ○*h ○*h --- *n

HI-HAT -○*h ○*h ○[III]*h ○*h ○*h ○*h ○*h ○*h ○*h -○*h ○*h ○*h -○*h ○*h ○*h ○*h ○*h ○*h - - *n

Others -○*h ○*h ○[III]*h ○*h ○*h ○*h ○*h ○*h ○*h -○*h ○*h ○*h -○*h ○*h ○*h ○*h ○*h --- *n

1-7, 11 -●[I] ● ○ ●[I] ●*a ○*a ●○○*a -○ ○ *a ○*k -●[II] ●[II] ○*a ●[II] ○-○*m ○*m *n

8-●[I] ● ○ ●[I] ●*a ○*a ●○○*a -○ ○ *a ○*k -●[II] ●[II] ○*a ●[II] ○●○*m ○*m *n

9/10 -○○○○ ○ *a ○*a ○○○*a -○ ○ *a ○*k -○○○*a ○○-*m ○*m *n

13 -●*a ●*a ○*a ● ● *a ○*a ●○○*a -○ ○ *k ○*k -●[II] ●[II]*a ○*a ●[II] ○●○*m ○*m -

14/15, 16/17 *j -○*a ○*a ○*a ○ ○ *a ○*a ○○○*a -○ ○ *k ○*k -○ ○ *a ○*a ○○-*m ○*m -

1-5 -●[I]*a ●*a ○*a ●[I] ●*a ○*a ●○○*a -○ ○ *a ○*k -●[II] ●[II]*a ○*a ●[II] ○-○*m ○*m *n

6-8, 12-15 -●*a ●*a ○*a ● ● *a ○*a ●○○*a -○ ○ *a ○*k -●[II] ●[II]*a ○*a ●[II] ○-○*m ○*m *n

9-●*a ●*a ○*a ● ● *a ○*a ●○○*a -○ ○ *a ○*k -●[II] ●[II]*a ○*a ●[II] ○●○*m ○*m *n

10/11 *j -○*a ○*a ○*a ○ ○ *a ○*a ○○○*a -○ ○ *a ○*k -○ ○ *a ○*a ○○-*m ○*m *n

1-●[I] ●*c ○*c ●[I] ●*i ○*i ●○○*i -○○*k ○*k -● ● *d ○*i ●○----

2/10-4/12, 8/9 *j -○ ○ *c ○*c ○ ○ *i ○*i ○○○*i -○ ○ *k ○*k -○ ○ *d ○*i ○○----

7-● ● *c ○*c ● ● *i ○*i ●○○*i -○ ○ *k ○*k -● ● *d ○*i ●○●---

5, 6 -● ● *c ○*c ● ● *i ○*i ●○○*i -○ ○ *k ○*k -● ● *d ○*i ●○----

1-○[I] ●*e ○[III] ●[I] ●*i ○*i ● ○ ○*i -○ ○ *k ○*k -●●○*i ●○----

2/10-4/12, 8/9 *j -○ ○ *e ○[III] ○ ○ *i ○*i ○○○*i -○ ○ *k ○*k -○○○*i ○○----

7-○ ● *e ○[III] ● ● *i ○*i ●○○*i -○ ○ *k ○*k -●●○*i ●○●---

5, 6 -○ ● *e ○[III] ● ● *i ○*i ●○○*i -○ ○ *k ○*k -●●○*i ●○----

1-○ ● *f ○[III] ● ● *i ○*i ●○○*i -○ ○ *k ○*k -●●○*i ●○----

2-4 -○ ○ *f ○[III] ○ ○ *i ○*i ○○○*i -○ ○ *k ○*k -○○○*i ○○----

5, 6 -○ ● *f ○[III] ● ● *i ○*i ●○○*i -○ ○ *k ○*k -●●○*i ●○----

7-○ ○ *f ○[III] ○ ○ *i ○*i ○○○*i -○ ○ *k ○*k -○○○*i ○○○*b ---

8/9 *j -○ ○ *f ○[III] ○ ○ *i ○*i ○○○*i -○ ○ *k ○*k -○○○*i ○○----

Produces a single Voice assigned to the head (or bow) section.

[I] Compatible with the Pad Control function.

Produces two Voices that are individually assigned to the head and open rim / closed rim (or bow and edge/cup) sections. [II] Supports choking and mute techniques.

Produces two Voices that are individually assigned to the head and closed rim sections (compatible with two piezo pads). [III] When the head is hit simultaneously with the rim, the sound may become softer in volume.

Produces three Voices that are individually assigned to the head, open rim, and closed rim (or bow, edge and cup) sections. [IV]

The cup does not sound when the Cup Switch is set to “OFF.”

-Not verified or guaranteed. [V]

Supports choking and mute techniques. Bow shot supports position sensing.

[VI] When the XP125SD-X is connected, head shots and open rim shots support position sensing.

*a If the Pad you have is not listed in the Trigger settings menu, upgrade the firmware of your drum module. *i

Change the settings as shown below. For more information, refer to the Owner’s Manual for your drum module.

　Visit the following web site to check the latest version and to download the necessary firmware. https://download.yamaha.com/ · In the Trigger settings page, set the Pad Type to the appropriate settings for your Pads.

- TP70S: a value that corresponds to TP65S

*b Change the settings as shown below. For more information, refer to the Owner’s Manual for your drum module. - TP70: a value that corresponds to TP65

· In the Trigger Setup Edit mode [TRIG2], set the Pad Type (Type) to “RHH.” - KU100: a value that corresponds to KP65

- PCY90AT, PCY95AT: a value that corresponds to PCY65

*c Change the settings to optimize the sensitivity. For more information, refer to the DTX500 Module Setup Guide. · Adjust the parameter value for Gain or Velocity Curve (in the Trigger settings page) according to your preferences.

*d Change the settings as shown below. For more information, refer to the Owner’s Manual for your drum module. *j When connecting a drum module with a 2- or 3-Zone Pad using a stereo cable, change the settings on the other input for the jack as shown below.

· To use the Pad as a Crash or Ride, set the Pad Type (Type) to “CY-1” or “CY-2” or “CY-3” in the Trigger mode [TRIG2]. When the KP65 is used without an external pad connected to the KP65, the settings on the other input for the jack are required.

· To use the Pad as a Hi-Hat, set the Pad Type (Type) to “HH-1” in the Trigger mode [TRIG2] (only Input 7 can be used). · DTX502 series and DTX-PRO: Set the parameter value for Pad Type (Trigger settings page) to "OFF."

· DTX500, DTXPLORER, and DTXPRESS series: Set the parameter value for Gain (Trigger Setup Edit page) to "0."

*e Change the settings as shown below. For more information, refer to the Owner’s Manual for your drum module. · Other drum modules: Set the parameter value for Minimum Level (Trigger settings page) to "99."

· In the Trigger mode [TRG2], set the Pad Type (Type) to “TP2/SnrA” or “TP2/SnrB” or “TP2/Tom.”

· When you hear little or no sound when you hit the Pad softly, increase the parameter value for Gain in TGR3 (Gain and MVI).

*k Change the settings as shown below. For more information, refer to the Owner’s Manual for the KP100 or KP90 and your drum module.

· In the Trigger settings page, set the Pad Type to "KP100." (When there is no "KP100" shown on the page, select a value

*f Change the settings as shown below. For more information, refer to the Owner’s Manual for your drum module. that corresponds to "KP65.")

· In the Trigger mode [TRIG2], set the Pad Type (Type) to “TP1/SnrA” or “TP1/SnrB” or “TP1/Tom.” · Move the level adjuster behind the Pad, or adjust the parameter value for Gain or Velocity Curve (Trigger settings page),

· When you hear little or no sound when you hit the Pad softly, increase the parameter value for Gain in TGR3 (Gain and MVI). according to your preferences.

*g Change the settings as shown below. For more information, refer to the Owner’s Manual for your drum module. *l

Change the settings as shown below. For more information, refer to the Owner’s Manual for your drum module.

· In Menu Mode [5-3], set the Snare Pad Type to the appropriate settings for your Pad. · In Trigger settings, select the appropriate Input Mode and Pad Type.

- XP series: "4:XP-series pad" or "6:XP-series pad reversed"

- TP70S: "2:TP70S" or "5:TP70S reversed"

For more information, refer to the "Drum Trigger Module Setup Manual for DT50S/DT50K."

- TP70: "2:TP70S"

- Other Pads: "3:Snare pad that comes with DTX400K or DTX402K”

*n Can be connected to the Hi-Hat Control jacks of the drum modules listed below.

· Adjust the parameter value for Gain (Menu Mode [5-5]) and Minimum Level (Menu Mode [5-6]) according to your preferences.

・DTX400、DTX402、DTX700、DTX900M、DTX900、DTXTREME III

Can be connected to the FootSw jack of the EAD10, or the HH-Kick jack of the DTX700.

*h Adjust the parameter value for Gain (Menu Mode [5-5]) and Minimum Level (Menu Mode [5-6]) according to your preferences.

*o Compatible as a trigger module for the DTX502 series Drum Kits. The following settings are necessary. For more information, refer to the Owner’s Manuals

for your drum module and the KP65.

· For the initial settings, select the DTX502 series drum kit you have in the Trigger Setup Wizard.

If the DTX502 series drum kits are not available, update the firmware of the DTX-PRO.

· When the output level of the KP65 is too high, adjust the output level with the LEVEL adjustment knob on the back of the KP65.

· The hi-hat for DTX522K or DTX542K functions as a 2-zone pad. (The bell or cup sounds are not produced.)

· If you are using the second crash cymbal, connect it to the Crash2 jack.

· When the KP65 is used without an external pad connected to the KP65, the pad type for the other input (Pad 13) should be turned OFF on the Trigger settings page.

Jul-2021

TP70S

(3 Zone)

TP70

KP90

XP120SD

XP120T

XP100SD

XP100T

(3 Zone)

INPUT

TP65

KU100

KP125W

KP125

KP65

EAD10

DTX-PRO *o

DTX-PROX *o

KP128

PCY175

(3 Zone)

DTX402

PCY65S

(2 Zone)

PCY90AT

PCY95AT

XP125SD-X

XP125T-X

XP105T-X

XP125SD-M

XP125T-M

XP105T-M

PCY100

(3 Zone)

[IV]

TP65S

(3 Zone)

DTXM12

DTXPRESS IV

DTXPLORER

DTX500

DTX502

DTX900M

DTX900

DTXTREME III

DTX400

DTX700

XP80

(3 Zone)

XP70

TP120SD

TP100

(3 Zone)

PCY155

PCY135

(3 Zone)

KP100

HH40

RHH135

(2 Zone)

DT50S

DT50K

PCY65

Published 09/2021

YJ-E0

Yamaha Pad Module Compatibility Table Pad/Module 2 (la) En

Navigation menu

Versions of this User Manual:

Views

Navigation