Yamaha R N500 Firmware Update Procedure_EN Procedure EN
User Manual: Yamaha R-N500 Firmware Update Procedure
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Firmware Update Procedure for R-N500 IMPORTANT NOTICE Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by Yamaha. Improperly updated products may cause improper operation, and any parts or service required to restore proper operation will not be covered under the Yamaha Limited Warranty. Choose from the following 2 methods to update to the latest firmware. Click here for Firmware Update Through the Internet (Connection to the Internet is required) Click here for Firmware Update by USB (A USB thumb drive is required) In case of error, see the Troubleshooting section [ 1. Firmware Update Through the Internet ] Requirements: Your R-N500 is connected to the Internet if you can receive Internet radio stations. (See owner’s manual for details) DIMMER DISPLAY RETURN POWER SELECT/ENTER STEP 1 Turn off the unit. STEP 2 While holding down RETURN on the front panel, press power. STEP 3 “ADVANCED SETUP” will be shown for seconds. STEP 4 Rotate SELECT/ENTER to select firmware update mode as shown below. Firmware Update Procedure for R-N500 STEP 5 Press SELECT/ENTER repeatedly to select “NETWORK” STEP 6 Press DISPLAY to start the update. (One screen shot during update process.) Update is completed when “UPDATE SUCCESS”, “PLEASE…”, “POWER OFF!” is displayed alternately. Then, power off the unit. note: DO NOT interrupt the power or press any buttons during the update. In case the power is accidentally cut off, the R-N500 will restore original firmware. Perform the update procedure from STEP 1 again. STEP 7 Confirm updated firmware version Retry from STEP 2 to enter “ADVANCED MODE”. Rotate SELECT/ENTER to select firmware version. Confirm that the firmware version has been updated. X.XX (X.XX shows actual firmware version.) Congratulations! You have completed the firmware update. Your R-N500 is ready for normal use. [ 2. Firmware Update by USB ] Requirements: ・ ・ USB thumb drive, with enough free space to store the firmware. （File system with FAT16 or FAT32 format） Firmware file provided by Yamaha. Firmware Update Procedure for R-N500 DIMMER DISPLAY RETURN POWER SELECT/ENTER STEP 1 Turn off the unit. STEP 2 Insert the USB thumb drive on the front panel. STEP 3 While holding down RETURN on the front panel, press power. STEP 4 “ADVANCED SETUP” will be shown for seconds. STEP 5 Rotate SELECT/ENTER to select firmware update mode as shown below. STEP 6 Press DISPLAY to start the update. (One screen shot during update process.) Update is completed when “UPDATE SUCCESS”, “PLEASE…”, “POWER OFF!” is displayed alternately. Then, power off the unit. Firmware Update Procedure for R-N500 note: DO NOT interrupt the power or press any buttons during the update. In case the power is accidentally cut off, the R-N500 will restore original firmware. Perform the update procedure from STEP 1 again. STEP 7 Confirm updated firmware version Retry from STEP 2 to enter “ADVANCED MODE”. Rotate SELECT/ENTER to select firmware version. Confirm that the firmware version has been updated. X.XX (X.XX shows actual firmware version.) Congratulations! You have completed the firmware update. Your R-N500 is ready for normal use. [ 3. Troubleshooting ] In case error message appeared during the update and unable to power on, perform following update procedure. STEP 1 Copy the update file to a USB thumb drive Unzip the downloaded file and copy to the root directory of a USB thumb drive. Be sure to delete all other files in a USB thumb. STEP 2 Insert the USB thumb drive on the front panel In this step, AC power cable needs to be disconnected and power switch on the front panel is pressed to POWER/ON in advance. STEP 3 Enter firmware update mode Connect AC power cable to AC outlet, while pressing DIMMER button. ”USB UPDATE” will be shown in the front panel display. Firmware update will be started automatically. note: DO NOT interrupt the power or press any buttons during the update. In case the power is accidentally cut off, perform the update procedure from STEP 1 again. Update is completed when “UPDATE SUCCESS”, “PLEASE…”, “POWER OFF!” is displayed alternately. Then, power off the unit. STEP 4 Confirm updated firmware version Enter “ADVANCED SETUP” mode as introduced in Firmware Update Through the Internet/by USB in previous sections. Rotate SELECT/ENTER to select firmware version. Confirm that the firmware version has been updated. Congratulations! You have completed the firmware update. Your player is ready for normal use.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Instance ID : uuid:bae984f6-519b-42c5-8f25-26817d553769 Document ID : uuid:D341DEA7-C297-F96F-FB4A-6B1E7F4AFCD0 Format : application/pdf Creator : murata Title : Microsoft Word - R-N500 Firmware Update Procedure_EN Create Date : 2014:04:10 16:17:21+09:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2016:11:25 18:47:08+09:00 Metadata Date : 2016:11:25 18:47:08+09:00 Producer : Acrobat Distiller 11.0 (Windows) History Action : linearized, encrypted History Software Agent : PDFlib PLOP 5.0 (.NET/Win64), PDFlib PLOP 5.0 (.NET/Win64) History When : 2016:11:25 18:47:08+09:00, 2016:11:25 18:47:08+09:00 Page Count : 4 Author : murataEXIF Metadata provided by EXIF.tools