Yamaha RX A1000 Owner's Manual (for Canada) Omrc En2 1
User Manual: Yamaha RX-A1000 Owner's Manual (for Canada)
Open the PDF directly: View PDF .Page Count: 148
Owner’s Manual
AV Receiver
English for Canada
BEFORE USE
MAIN
ZONE 2
CODE SET
About this manual
SOURCE RECEIVER
Language selection
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
• Some features are not available in certain regions.
• This manual is created prior to production. Design and
specifications are subject to change in part as a result
of improvements, etc. In case of differences between
the manual and product, the product has priority.
• “jON SCREEN” (example) indicates the name of
the parts on the remote control. Refer to the “Remote
control” (☞p. 12) for the information about each
position of the parts.
• J1 indicates that the reference is in the footnote.
Refer to the corresponding numbers on the bottom of
the page.
• ☞ indicates the page describing the related
information.
• Click on the “
” at the bottom of the page to
display the corresponding page in “Part names and
functions.”
Front panel
Rear panel
Front panel display
Remote control
AUDIO
4
DOCK
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
TUNING
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
j
OPTION
VOLUME
ENTER
RETURN
k
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
1
2
3
5
6
7
9
0
10
4
8
This procedure allows you to select the language of
menus and messages on the TV screen.
1
4
Press kCursor B / C to select the favorite
language from the following options.
Press jON SCREEN to display the ON
SCREEN menu.
English (English),
(Japanese),
(French),
(German),
(Spanish),
(Russian)
2
Press kCursor B / C to select “Setup” and
press kENTER.
3
Press kCursor D / E to select the
“Language” and press kENTER.
5
Press jON SCREEN to close the ON
SCREEN menu.
ENT
INPUT
Supplied accessories
MUTE
Check that you received all of the following parts.
j ON SCREEN
k Cursor B / C / D / E
k ENTER
•
•
•
•
•
•
Remote control
Batteries (AAA, R03, UM-4) x 2
Power cable
YPAO microphone
AM loop antenna
Indoor FM antenna
En
2
CONTENTS
INTRODUCTION
Features and capabilities ................................................... 5
Using the TV OSD to operate the unit ............................. 6
Basic operation of OSD menu.......................................... 6
Viewing or modifying content
for the current input source ............... 6
Configuring settings for this unit
...................................................... 6
Adjust settings for each input source
................................................................. 7
Part names and functions.................................................. 8
Front panel........................................................................ 8
Front panel with the cover opened ................................... 9
Rear panel....................................................................... 10
Front panel display ......................................................... 11
Remote control ............................................................... 12
Remote control (sequel) ................................................. 13
On-screen display ........................................................... 14
CONNECTIONS
Connecting speakers ........................................................ 15
Speaker channels and functions...................................... 15
Speaker layout ................................................................ 16
Connecting speakers and subwoofers............................. 19
Advanced speaker configuration .................................... 23
Speaker layout utilizing an external power amplifier..... 23
Connecting an external amplifier ................................... 23
Connecting external components.................................... 24
Jacks and cables.............................................................. 24
Connecting a TV monitor............................................... 25
Connecting BD/DVD players and other devices ............ 28
Connecting game consoles or video camcorders............ 33
Connecting a multi-format player
or an external decoder .................................................... 33
Connecting a SCENE link
playback-compatible device ........................................... 34
Using the Trigger function to link external component
power .............................................................................. 34
Connecting audio/video recording devices .................... 35
Connecting to the network ............................................. 35
Connecting a USB storage device .................................. 36
Connecting the FM/AM antennas .................................. 37
Setting up the speaker parameters automatically
(YPAO).............................................................................. 38
PLAYBACK
Basic playback procedure ............................................... 45
Changing input settings with a single key
(SCENE function) ............................................................ 47
Selecting the SCENE suitable
for the external component............................................. 47
Enjoying favorite sound field effect ............................... 48
Selecting sound programs and sound decoders.............. 48
Enjoying spatial sound
with the CINEMA DSP function ................................... 48
Enjoying unprocessed playback
(Straight decoding mode) ............................................... 49
Enjoying Hi-Fi Sound Quality (Pure Direct Mode) ....... 50
Enjoying stereo playback ............................................... 50
Enjoying compressed music source with better sound
quality (Compressed Music Enhancer) .......................... 50
Sound programs.............................................................. 51
Controlling this unit while viewing the TV screen ....... 53
Basic operations via the TV screen display ................... 53
FM/AM tuning ................................................................. 60
Selecting a frequency for reception (Normal tuning) .... 60
Navigating the FM/AM tuner
from the content window ............................................... 61
Playing back tunes on the PC......................................... 63
Windows Media Player setup......................................... 63
Playback of PC music contents...................................... 63
Playing back tunes on the USB storage devices............ 65
Playback of the USB storage device .............................. 65
Listening to the Internet Radio ...................................... 67
Listening to Internet Radio ............................................ 67
Using shortcut function................................................... 69
Playing back tunes from your iPod™/iPhone™ ........... 70
Connecting the Universal Dock for iPod ....................... 70
Controlling an iPod™/iPhone™ .................................... 70
Playing iPod™/iPhone™ from the menu screen
(Menu browse control)................................................... 71
Operating basic playback functions
via the remote control (Simple remote control) ............. 72
Playing iPod™/iPhone™ with wireless connection ...... 72
Playing back tunes from Bluetooth™ components ...... 74
Connecting a Yamaha Bluetooth Wireless Audio
Receiver.......................................................................... 74
Pairing Bluetooth™ components ................................... 74
Using Bluetooth™ components ..................................... 75
Controlling this unit by using the Web browser
(Web Control Center)...................................................... 76
Displaying and Operating Web Control Center ............. 76
Configuring settings specific
to an individual input source (Option menu) ................ 55
Option menu display and setup ...................................... 55
Option menu................................................................... 56
Confirming and operating input sources from the
content window ................................................................ 59
Displaying the content window on the TV screen ......... 59
Switching the display between the Now Playing view
and the Browse view ...................................................... 59
En
3
SETUP
Configuring input sources (Input menu) ....................... 78
Configuring input sources .............................................. 78
Input menu...................................................................... 79
Editing the SCENE function (Scene menu) ................... 81
Editing a scene................................................................ 81
Scene menu..................................................................... 82
Simple registering as the SCENE................................... 83
Setting sound program parameters
(Sound Program menu) ................................................... 84
Editing sound programs.................................................. 84
CINEMA DSP parameters ............................................. 85
Parameters usable in certain sound programs ................ 87
Parameters usable in surround decoder .......................... 88
Setting various functions (Setup menu) ......................... 89
Operating the Setup menu .............................................. 89
Setup menu ..................................................................... 90
Manages settings for speakers ........................................ 90
Setting the audio output function of this unit ................. 94
Setting this unit’s video output function......................... 96
Setting HDMI functions ................................................. 97
Adjusting this unit’s network parameters ....................... 99
Setting this unit’s multi-zone function ......................... 100
Making the receiver easier to use ................................. 101
Language ...................................................................... 104
Confirming information of this unit
(Information menu) ....................................................... 105
Selecting information ................................................... 105
Controlling the remote control to operate various
functions.......................................................................... 107
Keys connecting external components ......................... 107
Default remote control code settings............................ 107
Registering remote control codes
for external component operations ............................... 108
Resetting all remote control codes ............................... 109
Extended functionality that can be configured
as needed (Advanced Setup menu)............................... 110
Displaying/Setting the Advanced Setup menu............. 110
Setting the impedance of speakers ............................... 110
Remote sensor .............................................................. 111
Avoiding crossing remote control signals
when using multiple Yamaha receivers ........................ 111
Changing TV format .................................................... 112
Removing HDMI video output up-scaling limits......... 112
Recovery and backup of the system settings................ 112
Initializing various settings for this unit....................... 112
Firmware update........................................................... 113
Firmware version.......................................................... 113
Information on HDMI™............................................... 131
About trademarks ......................................................... 132
Specifications.................................................................. 133
Index ............................................................................... 135
Using the HDMI Control function ............................... 114
Enjoying the contents in another room ....................... 118
Connecting Zone2 ........................................................ 118
Controlling Zone2 ........................................................ 120
Enjoying the music in all rooms................................... 120
APPENDIX
Troubleshooting ............................................................. 121
General ......................................................................... 121
HDMI™ ....................................................................... 123
Tuner (FM/AM) ........................................................... 124
USB and Network ........................................................ 125
iPod™/iPhone™ .......................................................... 126
Bluetooth™ .................................................................. 127
Remote control ............................................................. 127
Glossary .......................................................................... 128
Audio information ........................................................ 128
Sound program information ......................................... 129
Video information ........................................................ 130
Compatibility of the input
and output video signals............................................... 130
En
4
INTRODUCTION
Features and capabilities
■ Built-in high-quality, high-power 7-channel amplifier
■ Playback of music on the USB storage devices ................................................... 65
■ Multi-channel speaker configuration capability
■ Sophisticated on-screen display (OSD) for easy operation
–
–
–
–
–
2- to 7.1-channel speaker configurations .................................................................................................16
Presence speaker connections for playback with a richer sound field effect...........................................19
Bi-amplification connections for high-quality playback .........................................................................20
External amplifier connections for high-quality playback and expansion of channels ...........................23
Speaker impedance configuration............................................................................................................20
■ HDMI compatibility
– 8 HDMI input jacks (7 on the rear, 1 on the front) supporting 3D video signal input ............................28
– 2 selectable HDMI output jacks supporting Audio Return Channel and 3D video signal ......................26
–
–
–
–
Selection of input sources, scenes, and sound programs .........................................................................53
Navigation for the current input source (content window) ......................................................................59
Setup for this unit (ON SCREEN menu) .................................................................................................78
Setup for each input source (Option menu) .............................................................................................55
Most of functions can be operated with on-screen display on the TV screen. Refer to “Using the TV
OSD to operate the unit” on the following pages for information on functions that can be controlled
using the on-screen display.
■ Automatic setup for speaker acoustic parameters
(YPAO - Yamaha Parametric Room Acoustic Optimizer) ......................................38
■ Customizable remote control
■ Extensive inputs (max. 13) for external playback components
■ Multi-room listening capability (Zone2) ............................................................... 118
–
–
–
–
–
–
– Remote control code setup for operation of external components ........................................................107
BD/DVD/CD player connection ..............................................................................................................28
Game console / video camcorder connection ..........................................................................................33
Multi-format player / external decoder connection .................................................................................33
iPod/iPhone wired connection .................................................................................................................70
iPod/iPhone wireless connection .............................................................................................................72
Bluetooth component connection ............................................................................................................74
■ 1-button input/sound program/setting switching (SCENE function) ...................47
■ Built-in sound programs and surround decoders for playback variety of sources
–
–
–
–
Spatial sound playback with sound field effects (CINEMA DSP) ..........................................................48
Playback with no sound field effects (straight decoding) ........................................................................49
High-fidelity sound playback (Pure Direct).............................................................................................50
Enhanced sound playback for compressed sources (Compressed Music Enhancer)...............................50
■ Tuner playback
– FM/AM broadcast....................................................................................................................................60
■ Playback and control via network
– Playback of music on the PC and DLNA server......................................................................................63
– Internet radio service playback ................................................................................................................67
– Control this unit via network (Web Browser Control).............................................................................76
En
5
INTRODUCTION
Using the TV OSD to operate the unit
This unit features a sophisticated on-screen display (OSD) for the TV screen. The OSD is designed to enable visual guidance that simplifies operations. The OSD mainly displays the ON SCREEN and
Option menus, as well as the content window that displays the content of current input sources.
Basic operation of OSD menu
Configuring settings for this unit
■ Select an input source, scene and sound program
■ Configure an input source
– Select an input source ..............................................................................................................................53
– Select a scene ...........................................................................................................................................53
– Select a sound program............................................................................................................................54
■ Select a language
– Change the language displayed on the TV screen ............................................................104
Viewing or modifying content for the current input source
■ Operate the FM/AM tuner
– Display preset stations for selection ........................................................................................................61
– Display information on the station currently received.............................................................................61
– Perform operations such as searching for and registering stations using the screen buttons ..................61
■ Operate the Internet radio
– Display information on the station currently received.............................................................................67
– Play back the radio contents ....................................................................................................................67
– Bookmark Internet radio stations.............................................................................................................67
■ Operate the iPod music sources
– Display the list of iPod music sources for selection ................................................................................71
– Perform operations such as play, stop and pause using the TV screen ............71
–
–
–
–
Change the input source name ...........................................................................79
Specify a format for digital audio signals ..................................................................80
Enhance the sound of compressed audio ............................................................................80
Output a video signal input from another input source
while playing a multi-channel audio signal .......................................................................80
– Charge the iPod/iPhone when this unit is in standby mode ......................................80
– Play the music sources on PC with the external control ..............................................80
■ Customize a scene
– Register or clear settings for a selected scene , , ........................................82, 83
– Turn on a Yamaha BD/DVD player or CD player connected to this unit automatically
when a scene is selected ...................................................................................................82
– Changing a scene name and icon .......................................................................83
■ Adjust a sound program (sound program)
– Adjust sound program parameters ...........................................................................................................84
■ Display settings information for this unit
–
–
–
–
–
–
Display audio signal information ................................................................................105
Display video signal information ................................................................................105
Display HDMI signal information ...........................................................................105
Display network information ..............................................................................................106
Display system information ..................................................................................................106
Display Zone information ........................................................................................................106
Continues to the
next page
En
6
INTRODUCTION
Using the TV OSD to operate the unit
■ Adjust acoustic parameters to match your speakers and listening environment
– Specify speaker acoustic parameters automatically
(Yamaha Parametric Room Acoustic Optimizer - YPAO).......................................................................38
– Set up this unit’s speaker configuration simply ..................................................91
– Specify settings for each speaker .................................................................................91
– Control volume control for each speaker ..................................................................................93
– Apply speaker distance settings ...........................................................................................93
– Control equalizer sound quality ..................................................................................93
– Adjust test tone speaker ......................................................................................................94
■ Adjust audio signals output from this unit
–
–
–
–
–
–
Correct lag between audio and video signals ........................................................................94
Select a dynamic range adjustment method .............................................................95
Specify the maximum volume .......................................................................................95
Specify the initial volume ............................................................................................95
Restrict the video signals during the Pure Direct Mode ........................................95
Adjust DSP effect and volume level ..................................................................95
■ Adjust video signals output from this unit
– Convert analog video signal to another type of signal .......................96
– Specify the resolution and aspect ratio of output video signals ........................................96
■ HDMI settings
–
–
–
–
Assign the audio input source for the TV .................................................................98
Listen to TV audio with HDMI cable connection ..............................97
Transmit HDMI audio/video to the TV during standby mode ...............................98
Change the output destination of HDMI input audio signals .......................................98
■ Specify other functions for this unit
–
–
–
–
–
Enter standby mode automatically when no operations are performed .............102
Assign the other input to the selected input source .................................................................103
Change the wall paper displayed on the TV screen ........................................................103
Specify the function of the TRIGGER OUT jack for controlling external components
......................................................................................................103
– Prohibit changes to settings .....................................................................................104
Adjust settings for each input source
–
–
–
–
–
–
–
–
–
–
Adjust bass and treble levels .........................................................................................57
Enable low-volume background music ......................................................................57
Enjoying more spatial sound fields ............................................................57
Adjust the vertical position of dialogues ......................................................................57
Select the 5.1-channel signal playback method ..................................................57
Adjust the volume of input sources ...............................................................................58
Selecting audio input jacks ............................................................................................58
Shuffle or repeat the song ...........................................................................................58
Connect / Disconnect Bluetooth component to this unit ...................................58
Pairing Bluetooth component with this unit ...........................................................................58
■ Network settings
– Set the IP address of this unit ...........................................................................................99
– Accept the commands via LAN network when this unit is in the standby mode
.................................................................................................................................99
– Set the mac address filter for this unit ...............................................................99
■ Enable listening in multiple rooms (multi-zone function)
– Adjust Zone2 volume .......................................................................................................100
– Display the Zone2 menu on the TV .................................................................100
– Rename each zone or scene ...................................................101
En
7
INTRODUCTION
Part names and functions
c Front panel display
Front panel
Displays information on this unit (☞p. 11).
d PURE DIRECT
a MAIN ZONE A (Power)
Switches this unit between on and standby mode.
e
b HDMI Through/iPod Charge indicator
Lights up in any of the following cases while the unit is in standby
mode.
• When the Standby Through function is enabled and audio/video
from an external component connected with HDMI is output to a TV
during standby mode (☞p. 98).
• When an iPod/iPhone, which is placed in the Universal Dock for
iPod, is charging while the unit is in standby mode (☞p. 80).
This indicator also lights up when the Yamaha Wireless System for
iPod is connected to this unit (☞p. 72).
a
e
b
f
Switches this unit to Pure Direct Mode (☞p. 50).
INPUT selector
Selects an input source from which to playback. Rotate this selector to
cycle through the input sources in order.
VOLUME
Adjusts the volume level.
c
■ Opening and closing the front panel door
To use controls or jacks behind the front panel door, gently press
the bottom of the door to open it. Keep the door closed when not
using controls or jacks behind the front panel door.
d
f
Continues to the
next page
En
8
INTRODUCTION
Part names and functions
Front panel with the cover opened
m MULTI ZONE
g ON SCREEN
Turns on and off the ON SCREEN menu.
h OPTION
Turns on and off the Option menu (☞p. 55).
i TONE/BALANCE
j
k
l
Adjusts high-frequency/low-frequency output of speakers/headphones
in each zone (☞p. 46, p. 120).
Adjusts the balance of the volume of the left and right channels in
Zone2 (☞p. 120).
STRAIGHT
Changes a sound program to straight decoding mode (☞p. 49).
PROGRAM l / h
Selects a sound program (☞p. 48). Press the left or right key
repeatedly to cycle through sound programs.
SCENE
Switches the input source, the sound program, and the HDMI OUT
with a single button (☞p. 47, p. 81). When this unit is in standby
mode, press this key to switch on.
r Cursor B / C / D / E, ENTER, RETURN
ZONE2
Switches to enable/disable the audio and video output to Zone2
(☞p. 100, p. 118).
n
o
p
q
ZONE CONTROLS
Switches to Zone2 operation mode. This unit, or its remote control,
can be used to select input sources or adjust volume for an external
amplifier in another room or the built-in amplifier for speakers in
another room (☞p. 120).
INFO
Changes the information displayed on the front panel display
(☞p. 11).
MEMORY
Registers FM/AM stations as preset stations (☞p. 60). J1
FM/AM
Sets the FM/AM tuner band to FM or AM (☞p. 60). J1
PRESET j / i
Selects an FM/AM preset station (☞p. 61). J1
Cursor B / C / D / E Select menu items and change settings when
menus, etc., are displayed.
ENTER
Confirms a selected item.
RETURN
Returns to the previous screen when menus are
displayed, or close the menu.
s USB port
t
u
v
w
x
g
h i jk
rs
n t uv
l
For connecting a USB memory device or USB portable audio player
(☞p. 36).
DISPLAY
Switches the display between the Now Playing view and the Browse view.
YPAO MIC jack
Connect the supplied YPAO microphone and adjust the speaker
balance automatically (☞p. 38).
PHONES jack
For plugging headphones in. Sound effects applied during playback
can also be heard through the headphones.
VIDEO AUX jacks
For connecting game consoles to this unit temporarily (☞p. 33).
TUNING/CH jj / ii
Changes FM/AM tuner frequencies (☞p. 60). J1
mn o p q
w
x
J 1 : Usable when you have selected TUNER input.
En
9
INTRODUCTION
Part names and functions
Rear panel
g HDMI input jacks
a PHONO jacks
h
b
c
d
e
f
For connecting a turntable (☞p. 32).
DOCK jack
For connecting an optional Universal Dock for iPod (such as YDS12), Wireless System for iPod (YID-W10), or Bluetooth Wireless
Audio Receiver (YBA-10) (☞p. 70, p. 72, p. 74).
NETWORK port
For connecting to the network (☞p. 35).
HDMI OUT 1-2 jacks
For connecting an HDMI - compatible TV to output audio/video
signals (☞p. 26).
MON.OUT/ZONE OUT jacks (S-VIDEO/VIDEO jacks)
For connecting a TV capable of receiving video input, and outputting
video signals to it (☞p. 26, p. 27).
COMPONENT VIDEO jacks
For connecting external components equipped component videocompatible outputs to receive video signals (☞p. 29).
a
c
b
DOCK
de
NETWORK
ARC
AV 2
AV 3
AV 4
(1 BD/DVD)
AV OUT
SELECTABLE
For connecting TV that are compatible with component video signals,
using three cables to output video signal (☞p. 26).
REMOTE IN/OUT jacks
For connecting an external component that supports the remote
control function (☞p. 34).
TRIGGER OUT 1-2 jack
For connecting an external component that supports the trigger
function to operate it linked with operation of this unit (☞p. 34).
RS-232C terminal
This is a control expansion terminal for custom installation. Consult
your dealer for details.
AV1-4 jacks
For connecting to external components equipped with audio/video
outputs to receive audio/video signals (☞p. 29).
ANTENNA jacks
For connecting AM and FM antennas (☞p. 37).
i
j
k
l
m
g
h i
j
HDMI
AV 1
AV 2
AV 3
AV 5
AV 6
AV 7
TRIGGER
OUT
COMPONENT VIDEO
Y
PB
PR
Y
AV 3
PB
C
PR
AV 1
A
PHONO
GND
1
REMOTE
MONITOR OUT/ZONE OUT
Y
PB
PR
IN
D
AV 4
AUDIO 2
AUDIO 3
s
t
2
B
(2 TV)
r
OUT
AV 2
AUDIO 1
q
Distinguishing the input and output jacks
The area around the audio/video output jacks is marked
in white to prevent connection errors. Use these jacks to
output audio/video signals to a TV or other external
component.
RS-232C
AV 4
p
For outputting audio/video signals received when analog inputs are
selected (☞p. 35).
AUDIO1-4 jacks
For connecting external components equipped with audio outputs to
receive audio signals (☞p. 32).
MULTI CH INPUT jacks
For connecting a player that supports a multi-channel output
(☞p. 33).
ZONE OUT jacks
Outputs sound of this unit to an external amplifier set in a different
room. (☞p. 118).
PRE OUT terminals
For connecting a subwoofer with built-in amplifier or an external
power amplifier (☞p. 22, p. 23).
SPEAKERS terminals
For connecting the front, center, surround and surround back speakers
(☞p. 19). Connect the presence speakers (☞p. 19) or the speakers for
Zone2 (☞p. 18) to the EXTRA SP jacks.
AC IN
For connecting the supplied power cable.
k
(1 BD/DVD)
ARC
MON.OUT/ZONE OUT
o
jacks)
f
HDMI OUT
2
1
AV 1
n AV OUT jacks
For connecting external components equipped with HDMIcompatible outputs to receive audio/video signals (☞p. 28).
MONITOR OUT/ZONE OUT jacks (COMPONENT VIDEO
AUDIO 4
MULTI CH INPUT
(3 CD)
CENTER
+12V 0.1A MAX.
ZONE OUT
PRE OUT
(SINGLE)
ARC
4
AV OUT
HDMI
HDMI OUT
2
1
1
SELECTABLE
AV 1
AV 3
AV 4
AV 5
AV 6
AV 7
COMPONENT VIDEO
MON.OUT/ZONE OUT
2
AV 2
(1 BD/DVD)
ARC
Y
PB
PR
Y
AV 3
PB
C
PR
AV 1
REMOTE
A
Y
PB
PR
IN
PRE OUT
(SINGLE)
OUT
AV 2
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
SUR. BACK
SUBWOOFER
ZONE 2
SURROUND
FRONT
SUR. BACK
SUBWOOFER
B
CENTER
AUDIO 1
SPEAKERS
SURROUND
SURROUND BACK/
BI-AMP
CENTER
D
AV 4
FRONT
ZONE2/
F.PRESENCE
(2 TV)
AC IN
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH INPUT
(3 CD)
CENTER
ZONE OUT
1
2
ANTENNA
TICAL
(4 RADIO) GND AM
75
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
SUR. BACK
SUBWOOFER
ZONE 2
SURROUND
FRONT
SUR. BACK
SUBWOOFER
CENTER
SPEAKERS
SURROUND
SURROUND BACK/
BI-AMP
CENTER
FRO
EXTRA SP
SINGLE
SINGLE
Output jacks
l
m
n o
p
q
r
s
t
En
10
INTRODUCTION
Part names and functions
h ENHANCER indicator
Front panel display
i
a Tuner indicator
Light up according to the status of a received station (☞p. 60).
b ZONE2 indicator
c
d
e
f
g
j
Lights up when the audio and video output to Zone2 is enabled
(☞p. 120).
SLEEP indicator
Blinks when the sleep timer is on (☞p. 12, p. 120).
PARTY indicator
Lights up when the party mode is active (☞p. 100).
Multi information display
Displays a range of information on menu items and settings.
VOLUME indicator
Displays the current volume level.
HDMI indicator
Lights up during normal HDMI communication.
IN indicator
Lights up when this unit detects the external component connected to
the HDMI input jack (☞p. 28).
OUT 1/OUT 2 indicators
Indicate which HDMI OUT jack outputs audio/video signals
(☞p. 26).
a
b c d
PARTY
STEREO TUNED
ENHANCER
gh
i
k
l
m
n ADAPTIVE DRC indicator
Lights up when the Compressed Music Enhancer is active (☞p. 50).
CINEMA DSP indicator
Lights up when a sound field effect that uses CINEMA DSP
technology is selected.
CINEMA DSP 3D indicator
Lights up when CINEMA DSP 3D is activated (☞p. 49).
Cursor indicators
Light up if corresponding cursors on the remote control are available
for operations.
MUTE indicator
Blinks when audio is muted.
Speaker indicators
Indicate speaker terminals from which signals are output.
Center speaker
Subwoofer 1
Front speaker L
Subwoofer 2
Front speaker R
Presence speaker L
Surround speaker L
Surround back
speaker L
Lights up when the adaptive dynamic range control feature is tuned on
(☞p. 57).
■ Switching information on the front panel display
The front panel can display sound programs and surround
decoder names as well as the active input source.
Press fINFO repeatedly to cycle through displayed
informations. J2
Input source name
AV1
Standard
VOLUME
Sound program (DSP program)
Presence speaker R
Surround speaker R
Surround back
speaker J1
Surround back
speaker R
e
f
MUTE VOLUME
ADAPTIVE DRC
SLEEP
j
k
lk
m
n
J 1 : “SB” is displayed when using a 6.1-channel configuration only.
J 2 : During FM/AM reception, the frequency is displayed instead of the input source.
En
11
INTRODUCTION
Part names and functions
a Remote control signal transmitter
Remote control
j ON SCREEN
Transmits infrared signals.
Turns on and off the ON SCREEN menu.
b MAIN/ZONE2
Switches the zone to be operated by the remote control between the
Main zone and Zone2 (☞p. 120).
a
MAIN
ZONE 2
CODE SET
b
SOURCE RECEIVER
Select an input source on this unit from which to playback.
AV
1
2
3
4
5
6
7
V-AUX
AUDIO
1
2
3
USB
NET
MULTI
4
TUNER
FM
PHONO
INFO
i
MULTI
DOCK
TUNING
MEMORY
ENHANCER SUR. DECODE
g
h
AV1-7 jacks
Front panel VIDEO AUX jacks
AUDIO1-4 jacks
A USB storage device connected to the USB port.
Internet radio, a USB connected to the USB port,
or a PC connected to the NETWORK port.
MULTI CH INPUT jacks
A Universal Dock for iPod, Wireless System for
iPod, or Bluetooth Wireless Audio Receiver
connected to the DOCK jack.
FM/AM tuner
PHONO jacks
AM
PRESET
f
AV1-7
V-AUX
AUDIO1-4
USB
NET
DOCK
HDMI OUT
e
Switches an external component on and off.
d Input selector
c
d
c SOURCE A (SOURCE Power)
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
4
BD/DVD
TV
CD
RADIO
When inserting batteries in the remote control, remove the
battery compartment cover from the reverse side of the remote
control, and insert four AAA batteries into the battery
compartment so that they match with the polarity markings (+
and -).
Battery compartment
cover
j
ON SCREEN
OPTION
VOLUME
ENTER
TOP
MENU
POP-UP
MENU
MUTE
Battery compartment
FM
AM
MEMORY
PRESET F / G
TUNING H / I
Sets the FM/AM tuner band to FM.
Sets the FM/AM tuner band to AM.
Presets radio stations.
Selects a preset stations when the FM/AM.
Changes tuning frequencies.
Cycles the information displayed on the front panel display (the name
of the currently selected input source, the sound program, the
surround decoder, the FM/AM tuner frequency, etc.).
g SLEEP
REC
1
2
3
4
5
6
7
8
9
0
10
c
Operates the FM/AM tuner. These keys are used when using the tuner
input.
f INFO
DISPLAY
a
b
e Radio control keys
STRAIGHT PURE DIRECT
SCENE
RETURN
TUNER
PHONO
■ Installing batteries in the remote control
Switches this unit to standby mode automatically after a specified
period of time has elapsed (sleep timer). Press this key repeatedly to
set the time for the sleep timer function.
120min.
Off
NOTE
If there are remote control codes for external components
registered to the remote control, removing the batteries for more
than 2 minutes, or leaving exhausted batteries in the remote
control, may clear the remote control codes. If this should occur,
replace the batteries with new ones, and set the remote control
codes.
90min.
ENT
TV
Replace the batteries with new ones if the remote control can
only be operated within a narrow range.
30min.
60min.
Continues to the
next page
INPUT
TV VOL
MUTE
TV CH
The SLEEP indicator lights up when the sleep timer is on.
h PARTY
Switches the party mode on and off (☞p. 120).
i SCENE
Switch the input source and the sound program with a single button
(☞p. 47). When this unit is in standby mode, press this key to switch on.
En
12
INTRODUCTION
Part names and functions
k Cursor B / C / D / E, ENTER, RETURN
Remote control (sequel)
MAIN
ZONE 2
CODE SET
o
p
q
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
USB
2
3
NET
MULTI
m Numeric keys
Enter numbers.
4
n TV control keys
DOCK
Operate a monitor such as a TV.
HDMI OUT
TUNER
FM
TUNING
p SOURCE/RECEIVER
MEMORY
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
4
BD/DVD
TV
CD
RADIO
STRAIGHT PURE DIRECT
s
ON SCREEN
Switches this unit between on and standby mode.
t
VOLUME
ENTER
u
POP-UP
MENU
s Sound selection keys
Switch between the sound field effect (sound program) you are using
and the surround decoder (☞p. 48).
DISPLAY
TOP
MENU
r HDMI OUT
Switches the output jack connected to an HDMI compatible TV
(☞p. 45).
OPTION
RETURN
Switches remote control key function to operate this unit or an
external component (☞p. 107). Operate an external component when
this key glows green, or this unit when this key glows orange.
q RECEIVER A (RECEIVER Power)
SCENE
k
o CODE SET
Sets remote control codes for external component operations
(☞p. 108).
AM
PRESET
INFO
r
PHONO
l External component operation keys
Operate recording, playback, and menu displays etc. for external
components (☞p. 107). J1
AUDIO
1
Cursor B / C / D / E Select menu items and change settings when
menus, etc, are displayed.
ENTER
Confirms a selected item.
RETURN
Returns to the previous screen when menus are
displayed, or close the menu.
DISPLAY
Switches the display between the Now Playing
view and the Browse view.
MUTE
v
t OPTION
Turns on and off the Option menu (☞p. 55).
REC
l
u VOLUME +/Adjust the volume level (☞p. 45).
m
1
2
3
4
5
6
7
8
9
0
10
v MUTE
Turns the mute function of the sound output on and off (☞p. 45).
ENT
TV
INPUT
n
TV VOL
TV CH
MUTE
J 1 : You can use lExternal component operation keys for each input source to operate registered components. Remote control codes must be registered for each input
in advance if you want to operate external components (☞p. 108).
En
13
INTRODUCTION
Part names and functions
On-screen display
When a TV is connected to this unit, the supplied remote control can be used to specify and verify this
unit’s settings via menus and options displayed on the TV screen.
The following displays are available in the on-screen display.
ON SCREEN menu
Option menu
Content window
Press jON SCREEN to display the ON
SCREEN menu.
Press dInput selector to display the content
window.
Detailed settings for this unit can be
configured. Use this menu to select desired
settings, change their values, or check the
current status of this unit.
Refer to “SETUP” (☞p. 78) for details.
Includes the Browse view and the Now
Playing view. The Now Playing view displays
the status of the source from which music is
currently played back. Adjust settings for
music content from the Browse view.
Refer to “Confirming and operating input
sources from the content window” (☞p. 59)
for details.
Press tOPTION to display the Option menu.
Configure the optional settings for each input
source. Settings such as “Tone Control” and
“Volume Trim” are applied to this unit
regardless of the input source.
Refer to “Configuring settings specific to an
individual input source (Option menu)”
(☞p. 55) for details.
En
14
CONNECTIONS
Connecting speakers
This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and
connections in your listening environment.
Speaker channels and functions
■ Front left and right speakers
The front speakers are used for the front channel sounds (stereo
sound) and effect sounds.
■ Surround left and right speakers
■ Surround back left and right speakers
The surround speakers are for effect and vocal sounds when
playing back a 5.1-channel source or higher. If used with no
surround back speaker when playing back a 6.1-channel source or
higher (including a surround back channel), the sound of the
surround back channel is distributed between the left and right
surround speakers.
The surround back speakers are for rear effect sounds when
playing back a 6.1-channel source or higher. If used with only one
surround back speaker when playing back a 7.1-channel source or
higher, the sound of the left and right surround back channel is
mixed and output from a single speaker.
E.g.
E.g.
Front speaker layout:
Place these speakers at an equal distance from the ideal listening
position in the front of the room. When using a projector screen,
the appropriate top positions of the speakers are about 1/4 of the
screen from the bottom.
E.g.
Surround speaker layout:
Place the speakers at the rear of the room on the left and right sides
facing the listening position. They should be placed between 60
degrees and 80 degrees from the listening position and with the
speaker tops at a height of 1.5 – 1.8 m from the floor.
■ Presence left and right speakers
■ Center speaker
The center speaker is for the center channel sounds (dialog, vocals,
etc.).
The presence speakers are used for front effect sounds. When used
in combination with the sound programs (☞p. 51), a sound with a
richer and more spatial presence is possible.
Surround back speaker layout:
When used with 7.1ch sound, arrange the left and right speakers
towards the listening position, to the rear of the listening position.
Arrange the left and right speakers at least 30 cm apart. The same
separation as with the front left and right speakers is optimum.
When used with 6.1ch sound, arrange these to the rear of the
listening position.
■ Subwoofer
The subwoofer speaker is used for bass sounds and low-frequency
effect (LFE) sounds included in Dolby Digital and DTS. Use a
subwoofer that is equipped with built-in amplifier.
E.g.
Center speaker layout:
Place it halfway between the left and right front speakers. When
using a TV, place the speaker just above or just under the center of
the TV with the front surfaces of the TV and the speaker aligned.
When using a screen, place it just under the center of the screen.
E.g.
Presence speaker layout:
Place the left and right presence speakers 0.5 – 1 m to the outside
of the left and right front speakers respectively. The tops of the
presence speakers should be 1.8 m above the floor.
E.g.
Subwoofer speaker layout:
Place it to the outside of the front left and right speakers facing
slightly inward to reduce echoes from the wall. You can use one or
two subwoofers.
En
15
CONNECTIONS
Connecting speakers
Speaker layout
■ Enjoying the 7.1 channel audio source
■ 7.1-channel speaker layout (7 speakers + subwoofer)
In addition to the 7.1-channel speaker layout, a variety of speaker configurations can be specified with
presence speaker connection, bi-amp connection or the Zone2 function.
And, this unit is equipped with “Power Amp Assign” function which can easily apply the appropriate
speaker setting to this unit according to your speaker configuration.
Front R speaker
Subwoofer
Front L speaker
Surround R speaker
■ Connection of speakers
Connect the speakers to the appropriate jacks shown in the table for each speaker layout. Refer to
“Connecting speakers and subwoofers” (☞p. 19) for details on connecting speakers.
You can also use two subwoofers by connecting them to both SUBWOOFER1 and SUBWOOFER2
jacks. In this case, monaural sound of subwoofer channel is output from both speakers.
■ Assigning a speaker configuration
Center speaker
A speaker configuration must be assigned to this unit to activate the speakers. Use the Power Amp
Assign function to apply the appropriate settings shown in the table for each speaker layout. Refer to
“Power Amp Assign” (☞p. 91) for details on setting.
30 cm or more
Surround L speaker
Surround back L speaker J1
Surround back R speaker
Audio from a 7.1-channel audio source can be played back with no degradation with this speaker
configuration.
■ Connections of speakers
FRONT jacks
Front L/R speakers
SURROUND BACK jacks
Surround back L/R speakers
CENTER jack
Center speaker
SUBWOOFER
(PRE OUT) jack
Subwoofer
SURROUND jacks
Surround L/R speakers
■ Assigning a speaker configuration
Power Amp Assign
7ch Normal (Default)
J 1 : The sound of surround back channel can also be output from a single surround back speaker. When only one surround back
speaker is used, connect it to the SURROUND BACK L (SINGLE) jack and place it directly behind the listening position.
En
16
CONNECTIONS
Connecting speakers
■ Adding the presence speakers for a richer sound field effect
■ Enjoying the audio source without surround back speakers
■ Presence speaker layout (7 speakers + subwoofer + presence speakers)
■ 5.1-channel speaker layout (5 speakers + subwoofer)
Front R speaker
Presence R speaker
Front R speaker
Front L speaker
Front L speaker
Subwoofer
Surround R speaker
Subwoofer
Surround R speaker
Presence L speaker
Center speaker
Surround L speaker
Center speaker
Surround back R speaker
30 cm or more
Surround back L speaker J1
Surround L speaker
This unit automatically selects the presence speakers or surround back speakers to output sounds
according to the selected sound program.
When the sound program is changed, the speakers that output the sound are switched between the
presence speakers and surround back speakers automatically. J2
This unit can mix 7.1-channel audio source down to 5.1-channel sound. This enables 7.1-channel
sound without surround back speakers.
■ Connections of speakers
■ Connections of speakers
FRONT jacks
Front L/R speakers
SURROUND BACK jacks
Surround back L/R speakers
CENTER jack
Center speaker
SUBWOOFER
(PRE OUT) jack
Subwoofer
SURROUND jacks
Surround L/R speakers
EXTRA SP jacks
Presence L/R speakers
■ Assigning a speaker configuration
Power Amp Assign
FRONT jacks
Front L/R speakers
SURROUND jacks
Surround L/R speakers
CENTER jack
Center speaker
SUBWOOFER
(PRE OUT) jack
Subwoofer
■ Assigning a speaker configuration
Power Amp Assign
7ch Normal (Default)
7ch Normal (Default)
J 1 : The sound of surround back channel can also be output from a single surround back speaker. When only one surround back
speaker is used, connect it to the SURROUND BACK L (SINGLE) jack and place it directly behind the listening position.
J 2 : Sound cannot be output from the surround back speakers when it is output from the speakers connected to the EXTRA SP
jacks.
En
17
CONNECTIONS
Connecting speakers
■ Using the front speakers that support bi-amp connections for a
■ Using speakers in two rooms (Zone2 function)
■ 5.1-channel speaker layout (Front speakers (Bi-amp) + 3 speakers)
■ 7.1-channel speaker layout + Zone2 (7 speakers (in main zone) + subwoofer (in
main zone) + front speakers (in secondary zone))
high quality sound
Front R speaker
(Bi-amp connection)
Front L speaker
(Bi-amp connection)
Main zone
Subwoofer
Zone2
Front R speaker
Front L speaker
Subwoofer
Surround R speaker
Center speaker
Surround R speaker
Front L speaker
Center speaker
Surround L speaker
30 cm or more
Surround L speaker
Using the front speakers that support bi-amp connections reproduces a high quality sound.
■ Connections of speakers
FRONT jacks
Front L/R speakers
(bi-amp)
SURROUND BACK jacks
Front L/R speakers (bi-amp)
CENTER jack
Center speaker
SUBWOOFER
(PRE OUT) jack
Subwoofer
SURROUND jacks
Surround L/R speakers
Surround back L speaker J1
Surround back R
speaker
In addition to the main room, speakers in another room can also be controlled.
When the built-in amplifier assigned to speakers in another room is turned on, sound output
automatically switches from the surround back speakers to the speakers in the other room. J2
■ Connections of speakers
FRONT jacks
Front L/R speakers
SURROUND BACK jacks
Surround back L/R speakers
CENTER jack
Center speaker
SUBWOOFER
(PRE OUT) jack
Subwoofer
SURROUND jacks
Surround L/R speakers
EXTRA SP jacks
Zone2 speakers
■ Assigning a speaker configuration
Power Amp Assign
Front R speaker
5ch BI-AMP
■ Assigning a speaker configuration
Power Amp Assign
7ch + 1ZONE
J 1 : The sound of surround back channel can also be output from a single surround back speaker. When only one surround back
speaker is used, connect it to the SURROUND BACK L (SINGLE) jack and place it directly behind the listening position.
J 2 : Sound cannot be output from the surround back speakers when it is output from the speakers connected to the EXTRA SP
jacks.
En
18
CONNECTIONS
Connecting speakers
Connecting speakers and subwoofers
Connect your speakers to their respective terminals on the rear panel.
CAUTION
• Remove the power cable of this unit from the power outlet before connecting the speakers.
• Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined) cable into the “+”
(positive, red) terminal on this unit and the speakers, and the other cable into the “–” (negative, black) terminal.
• Be careful that the core of the speaker cable does not touch anything or come into contact with the metal areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit, “CHECK SP
WIRES!” will appear on the front panel display when this unit is switched on.
■ Front/Center/Surround/Surround back speaker and
Subwoofer connection
When connecting only one surround back speaker, connect the
speaker to the SURROUND BACK L (SINGLE) jacks.
Subwoofer
■ Presence speaker connection
When using the presence speakers, connect the speakers to the
EXTRA SP jacks as shown in the diagram below.
The presence speakers (PL/PR) that output front effect sounds can
be connected to this unit. With the sound programs (☞p. 51),
sound with a richer and more spatial presence can be created.
Presence speaker
Front speaker
R
L
R
L
1.8 m
0.5 – 1 m
0.5 – 1 m
PL
PR
L
R
1.8 m
RS-232C
HDMI
AV 2
AV 3
AV 7
RS-232C
AV 4
AV 5
AV 6
AV 7
D/DVD)
PR
Y
AV 3
PB
C
PR
Y
MONITOR OUT/ZONE OUT
PB
PR
IN
1
1
REMOTE
OUT
2
2
D
AV 4
MULTI CH INPUT
CENTER
Connection of presence speakers is recommended to take full
advantage of the effects of CINEMA DSP sound programs.
TRIGGER
OUT
TRIGGER
OUT
COMPONENT VIDEO
+12V 0.1A MAX.
+12V 0.1A MAX.
ZONE OUT
PRE OUT
(SINGLE)
SURROUND
SUR. BACK
2
ENTER
SURROUND
SUR. BACK
SUBWOOFER
ZONE 2
FRONT
SUBWOOFER
CENTER
FRONT
SPEAKERS
SURROUND
SURROUND BACK/
BI-AMP
CENTER
FRONT
ZONE2/
F.PRESENCE
ZONE2/
F.PRESENCE
AC IN
Continues to the
next page
EXTRA SP
SINGLE
R
L
Surround
speaker
R
L
Surround back
speaker
EXTRA SP
Center speaker
En
19
CONNECTIONS
Connecting speakers
■ Bi-amp connection
This unit can be connected to speakers that support bi-amp
connections. When connecting speakers, connect the FRONT jacks
and the SURROUND BACK/BI-AMP jacks as in the diagram
below. Configure the bi-amp settings to activate connections.
■ Changing speaker impedance
■ Multi-zone audio system using the internal
amplifier of this unit
Connect the speakers in the second zone to the EXTRA SP jacks as
in the diagram below.
1
2
ZONE2/
F.PRESENCE
Zone2
SPEAKERS
EXTRA SP
DOCK
NETWORK
ARC
AV 2
AV 3
AV 4
AV OUT
HDMI
HDMI OUT
2
1
AV 1
(1 BD/DVD)
SELECTABLE
AV 2
AV 1
AV 3
RS-232C
AV 4
AV 5
AV 6
AV 7
(1 BD/DVD)
ARC
TRIGGER
OUT
COMPONENT VIDEO
MON.OUT/ZONE OUT
Y
PB
PR
Y
AV 3
PB
C
PR
AV 1
A
PHONO
Y
GND
MONITOR OUT/ZONE OUT
PB
PR
1
REMOTE
IN
OUT
AV 2
2
B
D
AV 4
AUDIO 1
(2 TV)
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH INPUT
(3 CD)
CENTER
+12V 0.1A MAX.
ZONE OUT
PRE OUT
(SINGLE)
SURROUND
SUR. BACK
Switch this unit to the standby mode.
Press MAIN ZONE A while pressing and holding
STRAIGHT on the front panel.
Release the keys when “ADVANCED SETUP” is displayed on
the front panel display.
After approximately a few seconds, the top menu item is
displayed. J1
FRONT
SURROUND BACK/
BI-AMP
This unit is configured for 8 Ω speakers at factory setting.
When connecting to 6 Ω speakers, carry out the following
procedure to switch to 6 Ω. When this unit is configured for 6 Ω
speakers, 4 Ω speakers can also be used as the front speakers.
1
2
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
SUR. BACK
SUBWOOFER
ZONE 2
FRONT
SUBWOOFER
CENTER
SPEAKERS
SURROUND
SINGLE
SURROUND BACK/
BI-AMP
CENTER
FRONT
ZONE2/
F.PRESENCE
AC IN
ANTENNA
FM (4 RADIO) GND AM
75
SINGLE
DOCK
NETWORK
ARC
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
AV OUT
HDMI
HDMI OUT
2
1
SELECTABLE
AV 2
AV 1
AV 3
AV 5
AV 6
AV 7
TRIGGER
OUT
COMPONENT VIDEO
MON.OUT/ZONE OUT
Y
PB
PR
Y
AV 3
PB
C
PR
AV 1
A
Y
GND
MONITOR OUT/ZONE OUT
PB
PR
1
REMOTE
IN
OUT
AV 2
2
B
D
AV 4
AUDIO 1
(2 TV)
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH INPUT
(3 CD)
CENTER
CAUTION
+12V 0.1A MAX.
ZONE OUT
PRE OUT
(SINGLE)
1
2
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
MAIN ZONE A
RS-232C
AV 4
(1 BD/DVD)
ARC
PHONO
EXTRA SP
FRONT
SURROUND
SUR. BACK
SUBWOOFER
ZONE
NE 2
SURROUND
FRONT
SUR. BACK
ER
SUBWOOFER
CENTER
SPEAKERS
SURROUND
SURROUND BACK/
BI-AMP
CENTER
FRONT
ZONE2/
F.PRESENCE
AC IN
ANTENNA
FM (4 RADIO) GND AM
75
SINGLE
EXTRA SP
NOTE
Before making bi-amplification connections, remove any
brackets or cables that connect a woofer with a tweeter. Refer to
the instruction manuals of speakers for details. When not
making bi-amplification connections, make sure that the
brackets or cables are connected before connecting the speaker
cables.
The EXTRA SP jacks of this unit should not be connected to a
Passive Loudspeaker Selector Box or more than one loudspeaker
per channel.
Connection to a Passive Loudspeaker Selector Box or multiple
speakers per channel could create an abnormally low impedance
load resulting in amplifier damage. See this owner’s manual for
correct usage.
Compliance with minimum speaker impedance information for all
channels must be maintained at all times. This information is found
on the back panel of this unit.
STRAIGHT
Continues to the
next page
J 1 : Refer to the “Extended functionality that can be configured as needed
(Advanced Setup menu)” (☞p. 110) for details on the Advanced Setup menu.
En
20
CONNECTIONS
Connecting speakers
3
Check that “SPEAKER IMP.” is displayed on the
front panel.
4
5
SPEAKERIMP.
8MIN
Press STRAIGHT repeatedly to select a “6ΩMIN.”
■ Connecting speakers
This type of jack can connect to the following speakers or
connection.
•
•
•
•
•
•
•
Front L/R speakers
Center speaker
Surround L/R speakers
Surround back L/R speakers
Presence L/R speakers
Zone2 speakers
Bi-amp connection (Front L/R speakers)
Connecting the banana plug
Tighten the knob, and then insert the banana plug into the end of
the terminal.
+
FR
ON
T
Banana plug
Switch this unit to the standby mode, and then
switch it on again.
The power turns on, when the settings you made has been
configured.
+
3
FR
ON
T
2
1
-
4
1
Remove approximately 10 mm of insulation from the
ends of the speaker cables, and twist the bare wires
of the cables together firmly so that they will not
cause short circuits.
2
3
4
Loosen the speaker terminals.
Insert the bare wire of the speaker cable into the gap
on the side of the terminal.
Tighten the terminal.
En
21
CONNECTIONS
Connecting speakers
■ Connecting the subwoofers
PRE
OUT
(SIN
G
2
LE)
1
Set the subwoofer volume as follows.
Volume: Set to approximately half volume (or slightly less than
half).
Crossover frequency (if available): Set to maximum.
2
SURR
UND
SUR.
BACK
CEN
VOLUME
SUBW
OOFE
R
CEN
TER
TER
FRO
1
CROSSOVER/
HIGH CUT
NT
Connect the subwoofer input jack to the
SUBWOOFER 1 and/or 2 jack on this unit with an
audio pin cable. J1
MIN
MAX
MIN
MAX
Subwoofer examples
NOTE
After connection, applying this setting to this unit is required to
activate all speaker connections. With using “Power Amp
Assign” function, you can easily apply the speaker
configuration.
Refer to “Power Amp Assign” (☞p. 91) for details on using
“Power Amp Assign” function.
J 1 : When using the only one subwoofer, connect the subwoofer to the
SUBWOOFER 1.
En
22
CONNECTIONS
Advanced speaker configuration
Speaker layout utilizing an external power
amplifier
More speakers can be used by connecting an external amplifier to
this unit’s PRE OUT jacks. The speaker layout specified using the
Power Amp Assign function varies when an external amplifier is
connected.
■ Using front speakers that support bi-amp
Connecting an external amplifier
■ 7.1-channel speaker layout
(Front speaker (Bi-amp) + 3 speakers + external
surround back speakers)
The same channel signals are output from the jacks of the PRE
OUT terminals as from their corresponding SPEAKERS terminals.
When connecting an external power amplifier (pre-main amplifier)
to enhance speaker output, connect the input terminals of the power
amplifier to the PRE OUT terminals of this unit.
connection and surround back speakers
BI-AMP
L Front L speaker
SBL Surround back L speaker
C Center speaker
SBR Surround back R speaker
SL
Speakers that output sound
SBL
■ Connections of speakers
Connect the speakers to the following jacks according to the
speaker layout. Refer to “Front/Center/Surround/Surround back
speaker and Subwoofer connection” for details on connecting
speakers (☞p. 19). Also, refer “Connecting an external amplifier”
for details on connecting an external amplifier.
You can also use two subwoofers by connecting them to both
SUBWOOFER1 and SUBWOOFER2 jacks. In this case, monaural
sound of subwoofer channel is output from both speakers.
■ Assigning a speaker configuration
A speaker configuration must be assigned to this unit to activate
speakers and an external amplifier. Use the “Power Amp Assign”
function to easily apply the appropriate speaker settings to this unit
in accordance with speaker configuration.
SBR
SR
EA
EA External amplifier
SR Surround R speaker
R
SW
R Front R speaker
SL Surround L speaker
BI-AMP
C
L
Symbols on the table
Connecting surround back speakers to an external amplifier
enables simultaneous use of front speakers that support bi-amp
connection and surround back speakers.
NOTES
• When a component is connected to the PRE OUT terminals, do
not connect speakers to the SPEAKERS terminals corresponding
to those PRE OUT terminals.
• When an external amplifier equipped with a volume adjustment
function is connected, a sufficient volume level may not be achieved.
Use of the following components is recommended.
– An amplifier with no volume adjustment function.
– An integrated amplifier equipped with a function that bypasses
volume circuitry, such as the Yamaha A-S2000 with MAIN IN
input.
V3
PB
C
PR
OUT
MONITOR OUT/ZONE OUT
Y
PB
PR
1
REMOTE
IN
OUT
2
■ Connections of speakers
D
V4
CENTER
FRONT jacks
Front L/R speakers (bi-amp)
CENTER jack
Center speaker
SURROUND jacks
Surround L/R speakers
SURROUND BACK jacks
Front L/R speakers (bi-amp)
SUR. BACK (PRE OUT) jacks
External amplifier
(for surround back L/R speakers)
SUBWOOFER (PRE OUT) jack
Subwoofer
+12V 0.1A MAX.
ZONE OUT
PRE OUT
(SINGLE)
1
2
SUBWOOFER
ZONE 2
FRONT
SURROUND
SUR. BACK
SUBWOOFER
CENTER
SPEAKERS
ROUND
SURROUND BACK/
BI-AMP
CENTER
abc
FRONT
F
d
a FRONT (PRE OUT) jacks
Front channel or front presence channel output jacks.
■ Assigning a speaker configuration
Power Amp Assign
5ch BI-AMP + SB
b SURROUND (PRE OUT) jacks
Surround channel output jacks.
c SUR. BACK (PRE OUT) jacks
d
Surround back output jacks. When you only connect one external
amplifier for the surround back channel, connect it to the SUR.
BACK (SINGLE) jack.
CENTER (PRE OUT) jack
Center channel output jack.
En
23
CONNECTIONS
Connecting external components
Jacks and cables
S-VIDEO jacks
This unit is equipped with the following input/output jacks. Use jacks and cables appropriate for
components that you are going to connect.
To transmit S-video signals that include luminance These jacks transmit conventional analog video
(Y) and chrominance (C) components.
signals.
Use S-video cables.
Use video pin cables.
VIDEO jacks
■ Audio/Video jacks
S-video cable
AV 1
Video pin cable
HDMI jacks
Digital video and digital sound are transmitted through a single jack.
Only use an HDMI cable.
AV 1
HDMI cable
• Use a 19-pin HDMI cable with the HDMI logo.
• We recommend using a cable less than 5.0 m long to prevent signal quality degradation.
• When a TV that supports HDMI functions and Audio Return Channel function is connected, audio
output from the TV can be input to this unit (☞p. 116).
• When a player and TV that support the 3D video format are connected to this unit, 3D content can be
played back.
• If you connect this unit to a component that has a DVI jack, an HDMI/DVI-D cable is required.
■ Analog video jacks
■ Audio jacks
OPTICAL jacks
COAXIAL jacks
These jacks transmit optical digital audio signals.
Use fiber-optic cables for optical digital audio
signals.
These jacks transmit coaxial digital audio signals.
Use pin cables for digital audio signals.
Digital audio fiber-optic cable
Digital audio pin cable
AUDIO jacks
COMPONENT VIDEO jacks
The signal is separated into three components:
luminance (Y), chrominance blue (PB), and chrominance red (PR).
Use component video pin cables with three plugs.
Component video pin cable
These jacks transmit conventional analog audio
signals.
Use stereo pin cables, connecting the red plug to
the red R jack, and the white plug to the white L
jack.
Stereo pin cable
EN
PON
COM
AV 1
A
En
24
CONNECTIONS
Connecting external components
Connecting a TV monitor
When connecting to a non-HDMI compatible TV
This unit is equipped with the following four types of output jack for connection to a TV.
HDMI OUT 1-2, COMPONENT VIDEO, S-VIDEO or VIDEO. Select the proper connection
according to the input signal format supported by your TV.
COMPONENT VIDEO jacks
(MONITOR OUT)
HDMI OUT 1-2 jacks
K
ARC
AV 4
AV OUT
HDMI
HDMI OUT
2
1
SELECTABLE
Connect to the TV using the same type of connection that you used to connect to the external
component, and change the inputs on your TV to match that of the external component you are using
for playback. If the external component and TV are equipped with different types of analog video
jacks, this unit will convert the component video, S-video or video signal to component video, S-video
or video signal, according to the type of video input jacks used by the TV. J2, J3
AV 1
AV 2
AV 3
AV 4
AV 5
Input
Output
COMPONENT
VIDEO
COMPONENT
VIDEO
Component
video input
AV 6
(1 BD/DVD)
ARC
TV
COMPONENT VIDEO
MON.OUT/ZONE OUT
Y
VIDEO jack
(MONITOR OUT)
PB
PR
Y
AV 3
PB
C
PR
S VIDEO
AV 1
A
Y
MONITOR OUT/ZONE OUT
PB
PR
REMOTE
IN
S VIDEO
S-video input
OUT
AV 2
B
D
AV 4
S-VIDEO jack
(MONITOR OUT)
AUDIO 1
(2 TV)
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH INPUT
(3 CD)
CENTER
ZONE OUT
PRE OUT
(SINGLE)
1
VIDEO
VIDEO
Video input
2
ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
SUR. BACK
SUBWOOFER
ZONE 2
SURROUND
FRONT
SUR. BACK
SUBWOOFER
SPEAKERS
SURROUND
SURROUND BACK/
CENTER
When connecting to an HDMI compatible TV
Video signal such as component video, S-video and video received by this unit is converted to HDMI
and output to the TV. Just select HDMI input on the TV to view video from any external source
connected to this unit. J1
Input
Output
HDMI
HDMI
Through
Converted
TV
HDMI input
COMPONENT
VIDEO
S VIDEO
VIDEO
Through
Converted
J 1 : You can change the resolution and aspect ratio when converting to HDMI to suit your requirements (☞p. 96).
J 2 : Set “Analog to Analog Conversion” to “On” (☞p. 96).
J 3 : Analog to analog conversion is available only for 480i/576i-resolution video signal.
En
25
CONNECTIONS
Connecting external components
■ Connecting an HDMI video monitor
■ Connecting a component video monitor J1
Connect the HDMI cable to one of the HDMI OUT 1-2 jacks.
Connect the component video cable to the COMPONENT VIDEO (MONITOR OUT) jacks.
HDMI input
HDMI
AV 1
HDMI
AV 2
AV 3
AV 4
AV 5
AV 6
Component video input
AV 7
(1 BD/DVD)
HDMI
TRIGGER
OUT
COMPONENT VIDEO
Y
PB
PR
Y
PB
AV 3
C
HDMI OUT
2
1
ARC
SELECTABLE
AV 1
AV 2
AV 2
AV 3
AV 4
AV OUT
(1 BD/DVD)
ARC
Y
HDMI
PB
PR
IN
OUT
2
B
COMPONENT VIDEO
MON.OUT/ZONE OUT
PR
V2
D
AV 4
AV 1
PB
Y
3
TV
COMPONENT
VIDEO
1
REMOTE
A
Y
NETWORK
(1 BD/DVD)
PR
V1
HDMI
DOCK
AUDIO 4
MULTI CH INPUT
PR
+12V 0.1A MAX.
ZONE OUT
CENTER
PRE OUT
Y
AV 1
PB
(SINGLE)
1
PB
PR
A
PHONO
2
Y
GND
AV 2
B
AUDIO 1
(2 TV)
AUDIO 2
AUDIO 3
FRONT
AUDIO 4
SURROUND
SUR. BACK
SURROUND
FRONT
ZONE 2
SUR. BACK
SUBWOOFER
CENTER
SPEAKERS
MULTI CH INPUT
(3 CD)
SUBWOOFER
SURROUND
SURROUND BACK/
BI-AMP
CENTER
FRONT
TV
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
SUR. BAC
SU
HDMI
EXT
SINGLE
ANTENNA
FM (4 RADIO) GND AM
75
HDMI
Projector
■ Connecting a S-video monitor J1
Connect the S-video cable to the S-VIDEO (MONITOR OUT) jack.
• Use a 19-pin HDMI cable with the HDMI logo.
• We recommend using a cable less than 5.0 m long to prevent signal quality degradation.
• When a TV that supports the HDMI function and Audio Return Channel function is connected, audio
output from the TV can be input to this unit (☞p. 116).
• When a player and TV that support the 3D video format are connected to this unit, 3D content can be
played back.
• This unit is equipped with HDMI OUT 1 and 2 jacks. The active HDMI OUT jack(s) can be selected
(☞p. 45). The active HDMI OUT jack(s) can be registered with the SCENE function (☞p. 81).
DOCK
NETWORK
HDMI OUT
2
1
ARC
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
AV OUT
SELECTABLE
AV 1
A
(1 BD/DVD)
ARC
COMPONENT
MON.OUT/ZONE OUT
Y
PB
PR
AV 1
A
PHONO
GND
S-video input
AV 2
B
AUDIO 1
(2 TV)
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH IN
(3 CD)
S
VIDEO
S
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
ANTENNA
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
SU
TV
FM (4 RADIO) GND AM
75
J 1 : The video signal for the COMPONENT VIDEO or S-VIDEO jacks is converted and output from HDMI OUT 1-2 jacks.
When connecting to a TV via the HDMI jack, you do not need to use these jacks.
En
26
CONNECTIONS
Connecting external components
■ Connecting a video monitor J1
When using other TVs
Connect the video pin cable to the VIDEO (MONITOR OUT) jack.
DOCK
NETWORK
HDMI OUT
2
1
ARC
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
SELECTABLE
AV 1
TV audio output
A
(1 BD/DVD)
ARC
COMPONENT
ZONE OUT
AV OUT
To transmit sound from the TV to this unit, connect the TV’s audio output to the AUDIO1-4 jacks.
Y
PB
PR
Connection
Optical digital audio output
Connect to the OPTICAL jack of the AUDIO1 with a fiber-optic cable.
Coaxial digital audio output
Connect to the COAXIAL jack of the AUDIO2 with a digital audio pin
cable.
Analog stereo output
Connect to one of the AUDIO1-4 with a stereo pin cable.
AV 1
A
PHONO
GND
Video input
AV 2
B
V
AUDIO 1
(2 TV)
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH IN
(3 CD)
VIDEO
V
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
ANTENNA
FM (4 RADIO) GND AM
75
FRONT
SURROUND
SU
TV
Select the input source connected via TV’s audio output jack to enjoy the TV sound.
If the TV supports optical digital audio output, we recommend that you connect the TV audio output
to the receiver’s AUDIO1 jack.
Connecting to AUDIO1 allows you to switch the input source to AUDIO1 with just a single key
operation using the SCENE function (☞p. 47).
Available input jacks
■ Listening to TV audio
To transmit sound from the TV to this unit, connect as followings according to the TV:
Audio output
(Optical, coaxial, or analog)
DOCK
NETWORK
HDMI OUT
2
1
ARC
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
AV OUT
SELECTABLE
AV 1
AV 2
(1 BD/DVD)
ARC
COMPONENT VIDEO
MON.OUT/ZONE OUT
Y
PB
PR
Y
A
AV 1
AUDIO
COAXIAL
OPTICAL
A
PHONO
GND
AV 2
B
A
When using a TV that supports the Audio Return Channel function and HDMI
Control function
When your TV supports both HDMI Control (e.g., Panasonic VIERA Link) and Audio Return
Channel functions, audio/video output from the unit to the TV and audio output from the TV to the
unit are possible using a single HDMI cable.
The input source is switched automatically to match operations carried out on the TV, and that
makes TV sound control easier to use.
For the connections and settings, refer to “Single HDMI cable input to TV audio with Audio Return
Channel function” (☞p. 116).
When using a TV that supports the HDMI Control functions
MULTI CH INPUT
(2 TV)
TV
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
SUR. BACK
SU
ANTENNA
FM (4 RADIO) GND AM
75
You can control your TV using the receiver’s remote control by entering the TV’s remote control
code (☞p. 108).
When using a TV that supports HDMI Control functions (e.g., Panasonic VIERA Link), if HDMI
Control functions are enabled on the unit, then input source can be switched automatically to match
operations carried out on the TV.
For the connections and settings, refer to “Switching the input source on this unit automatically
when listening to TV audio” (☞p. 115).
J 1 : The video signal for the VIDEO jacks is converted and output from HDMI OUT 1-2 jacks. When connecting to a TV via the
HDMI jack, you do not need to use these jacks.
En
27
CONNECTIONS
MAIN
Connecting external components
ZONE 2
CODE SET
Connecting BD/DVD players and other devices
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
4
USB
NET
MULTI
DOCK
This unit has the following input jacks. Connect them to the appropriate output jacks on
the playback devices such as BD/DVD players.
d
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
Input jack
Video input
Audio input
AV1 J1
HDMI/Component video/S-video/Video
HDMI/Coaxial digital/Analog (Stereo)
AV2 J1
HDMI/Component video/S-video/Video
HDMI/Coaxial digital/Analog (Stereo)
AV3 J1
HDMI/Component video/S-video/Video
HDMI/Optical digital/Analog (Stereo)
■ Receiving video signals from the HDMI jack and audio signals
from jacks other than HDMI
This unit can use the AV1-4 or AUDIO1-4 input jacks to receive audio signals from
other input jacks.
For example, if a playback device cannot produce audio signals from an HDMI jack,
use the following method to change the audio input.
DOCK
NETWORK
HDMI OUT
2
1
PRESET
TUNING
ARC
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
AV OUT
SELECTABLE
AV 1
COMPONENT VIDEO
Y
PB
MOVIE
MUSIC
SLEEP
PARTY
AV4 J1
HDMI/Component video/S-video/Video
HDMI/Optical digital/Analog (Stereo)
HDMI
HDMI
AV6
HDMI
HDMI
HDMI/Audio (Optical)
output
AV 3
P
AV 2
B
AV 4
AUDIO 1
(2 TV)
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH INPUT
(3 CD)
CEN
HDMI
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
Y
A
GND
STRAIGHT PURE DIRECT
AV5
PR
HDMI
AV 1
PHONO
ENHANCER SUR. DECODE
AV 2
(1 BD/DVD)
ARC
MON.OUT/ZONE OUT
t
HDMI
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
SUR. BACK
OPTICAL
AV7
HDMI
HDMI
AUDIO1
—
Optical digital/Analog (Stereo)
AUDIO2
—
Coaxial digital/Analog (Stereo)
AUDIO3
—
Analog (Stereo)
AUDIO4
—
Analog (Stereo)
VIDEO AUX
HDMI/S-video/Video
HDMI/Optical digital/Analog (Stereo)
PHONO
—
Analog (for turntable connection only)
SUBWO
SURROUN
O
O
ANTENNA
FM (4 RADIO) GND AM
75
OPTION
VOLUME
ENTER
RETURN
DISPLAY
k
BD/DVD player
TOP
MENU
POP-UP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
ENT
INPUT
MUTE
■ Connecting BD/DVD players and other devices with
HDMI cable
Connect the device with an HDMI cable to one of the HDMI jacks of the AV1-7. The
HDMI IN jack of the VIDEO AUX on the front panel can also be used.
Select the input source (AV1-7 or V-AUX) that the playback device is connected to for
playback.
d Input selector
k Cursor B / C / D / E
k ENTER
t OPTION
AV 1
AV 2
AV 3
AV 4
AV 5
AV 6
AV 7
(1 BD/DVD)
TRIGGER
OUT
COMPONENT VIDEO
Y
PB
PR
HDMI
Y
AV 3
PB
C
PR
Y
HDMI output
MONITOR OUT/ZONE OUT
PB
PR
1
REMOTE
IN
1
2
3
4
5
Press dInput selector to choose an input source (AV1-4, V-AUX,
AUDIO1-4, or PHONO).
Press tOPTION to enter the Option menu.
Press kCursor B / C to choose “Audio Select” and press kENTER.
Press kCursor D / E to choose an audio input jack and press
kENTER.
Once setup is complete, press tOPTION to close the Option menu.
OUT
2
D
AV 4
DIO 4
MULTI CH INPUT
HDMI
CENTER
+12V 0.1A MAX.
ZONE OUT
PRE OUT
(SINGLE)
SURROUND
SUR. BACK
1
HDMI
2
FRONT
SURROUND
SUR. BACK
SUBWOOFER
ZONE 2
FRONT
SUBWOOFER
CENTER
SPEAKERS
SURROUND
SURROUND BACK/
BI-AMP
CENTER
FRONT
J 1 : Coaxial digital and optical digital jacks function can be assigned to other AV jacks using “Input
BD/DVD player
Assignment.” Refer to “Input Assignment” for details (☞p. 102).
En
28
CONNECTIONS
Connecting external components
■ Connecting BD/DVD players and other devices with component
video cables
Using analog stereo audio output sources
Connect the playback device to the AV1, AV2, AV3 or AV4 jacks.
Connect the device with a component video cable to one of the AV1-4 input jacks.
Component video /
Audio output
Using optical digital audio output sources
DOCK
Connect the playback device to the AV3 or AV4 jacks.
NETWORK
HDMI OUT
2
1
ARC
SELECTABLE
AV 1
ARC
Y
PB
Y
PB
AV 2
AV 3
PR
(1 BD/DVD)
COMPONENT
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
AV OUT
MON.OUT/ZONE OUT
PR
Y
PB
C
PR
AV 1
PR
Component video /
Audio (Optical)
output
A
PHONO
GND
NETWORK
AV 2
HDMI OUT
2
1
ARC
SELECTABLE
AV 1
AV 2
B
PB
AV 3
PR
PB
Y
(1 BD/DVD)
ARC
(2 TV)
AV 2
AV 3
AV 4
AV OUT
Y
COMPONE
MON.OUT/ZONE OUT
Y
PB
PR
Y
AV 3
PB
C
PR
D
AV 4
AUDIO 1
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH INPUT
(3 CD)
ZONE OU
CENTER
L
AV 1
COMPONENT
A
AUDIO
AV 2
D
AV 4
AUDIO 1
(2 TV)
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH INPUT
(3 CD)
CENTER
R
L
B
PR
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
SUR. BACK
SUBWOOFER
ZONE 2
SURROUND
ZONE O
R
PB
ANTENNA
FM (4 RADIO) GND AM
Y
75
ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
FRONT
Ԝ OPTICAL ԝ COAXIAL
SURROUND
SUR. BACK
OPTICAL
SUBWOOFER
ZONE 2
SURROUND
O
O
ANTENNA
BD/DVD player
FM (4 RADIO) GND AM
BD/DVD player
Using coaxial digital audio output sources
Connect the playback device to the AV1 or AV2 jacks.
Component video /
Audio (Coaxial)
output
DOCK
NETWORK
HDMI OUT
2
1
ARC
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
AV OUT
SELECTABLE
AV 1
ARC
Y
PB
Y
PB
AV
P
(1 BD/DVD)
R
COMPONEN
NT VI
MON.OUT/ZONE OUT
PR
Y
AV 1
COMPONENT
VIDEO
A
PHONO
GND
AV 2
B
PR
AUDIO 1
(2 TV)
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH INP
(3 CD)
PB
Y
Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
SUR. B
COAXIAL
C
C
ANTENNA
FM (4 RADIO) GND AM
75
BD/DVD player
En
29
CONNECTIONS
Connecting external components
■ Connecting BD/DVD players and other devices with S-video
Using analog stereo audio output sources
Connect the playback device to the AV1, AV2, AV3 or AV4 jacks.
cables
Connect the playback device with a S-video cable to one of the AV1-4 input jacks.
DOCK
Using optical digital audio output sources
NETWORK
HDMI OUT
2
1
ARC
Connect the playback device to the AV3 or AV4 jacks.
S-video / Audio
output
DOCK
NETWORK
ARC
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
SELECTABLE
AV 1
AV 3
AV 4
(1 BD/DVD)
AV OUT
PR
GND
AV 2
B
AUDIO 2
AUDIO 3
AUDIO 4
MULTI C
(3 CD)
L
PR
AV 1
AUDIO
A
PHONO
PB
A
AUDIO 1
S
COMPONEN
PB
COMPONE
Y
AV 1
(2 TV)
Y
(1 BD/DVD)
MON.OUT/ZONE OUT
PHONO
VIDEO
(1 BD/DVD)
ARC
MON.OUT/ZONE OUT
AV OUT
AV 2
AV 1
ARC
S
HDMI OUT
2
1
AV 1
SELECTABLE
R
GND
S-video / Audio (Optical)
output
L
AV 2
S
B
AUDIO 1
(2 TV)
AUDIO 2
AUDIO 3
AUDIO 4
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
MULTI CH
(3 CD)
R
ANTENNA
VIDEO
FM (4 RADIO) GND AM
75
S
Ԙ COAXIAL ԙ COAXIAL
FRONT
Ԝ OPTICAL ԝ COAXIAL
OPTICAL
SURROUND
OPTICAL
O
O
ANTENNA
BD/DVD player
FM (4 RADIO) GND AM
75
BD/DVD player
Using coaxial digital audio output sources
Connect the playback device to the AV1 or AV2 jacks.
DOCK
NETWORK
HDMI OUT
2
1
ARC
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
AV OUT
SELECTABLE
AV 1
A
(1 BD/DVD)
ARC
COMPONENT
MON.OUT/ZONE OUT
Y
PB
PR
AV 1
A
PHONO
GND
S-video / Audio (Coaxial)
output
AV 2
S
B
AUDIO 1
(2 TV)
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH IN
(3 CD)
VIDEO
S
Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
SU
COAXIAL
C
C
ANTENNA
FM (4 RADIO) GND AM
75
BD/DVD player
En
30
CONNECTIONS
Connecting external components
■ Connecting BD/DVD players and other devices with video cables
Connect the playback device with a video pin cable to one of the AV1-4 input jacks.
Using analog stereo audio output sources
Connect the playback device to the AV1, AV2, AV3 or AV4 jacks.
Using optical digital audio output sources
DOCK
NETWORK
Connect the playback device to the AV3 or AV4 jacks.
HDMI OUT
2
1
ARC
DOCK
NETWORK
Video / Audio
output
HDMI OUT
2
1
ARC
SELECTABLE
AV OUT
(1 BD/DVD)
AV 2
PB
B
AUDIO 1
V
PR
AV 1
V
PR
GND
AV 2
COMPONEN
Y
PB
A
(1 BD/DVD)
MON.OUT/ZONE OUT
AV OUT
COMPONEN
Y
AV 1
V
AV 1
ARC
(1 BD/DVD)
MON.OUT/ZONE OUT
(2 TV)
(1 BD/DVD)
AV 1
ARC
PHONO
VIDEO
AV 1
SELECTABLE
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH
(3 CD)
L
A
PHONO
AUDIO
GND
Video / Audio (Optical)
output
AV 2
R
B
AUDIO 1
(2 TV)
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH
(3 CD)
L
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
R
ANTENNA
VIDEO
FM (4 RADIO) GND AM
75
V
SIRIUS
Ԙ COAXIAL ԙ COAXIAL
FRONT
Ԝ OPTICAL ԝ COAXIAL
SURROUND
OPTICAL
O
O
ANTENNA
75
FM
HD Radio (4 RADIO) RADIO
GND AM
BD/DVD player
BD/DVD player
Using coaxial digital audio output sources
Connect the playback device to the AV1 or AV2 jacks.
DOCK
NETWORK
HDMI OUT
2
1
ARC
AV 3
AV 4
(1 BD/DVD)
AV OUT
SELECTABLE
AV 1
COMPONEN
MON.OUT/ZONE OUT
Y
PB
PR
AV 1
V
A
PHONO
Video / Audio (Coaxial)
output
(1 BD/DVD)
ARC
GND
AV 2
B
AUDIO 1
(2 TV)
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH
(3 CD)
VIDEO
V
Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
COAXIAL
C
C
ANTENNA
FM (4 RADIO) GND AM
75
BD/DVD player
En
31
CONNECTIONS
Connecting external components
■ Connecting CD players and other audio devices
Using coaxial digital output sources
Connect the playback device to the AUDIO2 jack.
Using analog stereo output sources
Connect the playback device to the AUDIO1, AUDIO2, AUDIO3 or AUDIO4 jacks.
DOCK
NETWORK
HDMI OUT
2
1
ARC
DOCK
NETWORK
AV 1
HDMI OUT
2
1
ARC
SELECTABLE
AV 2
AV 3
AV 4
(1 BD/DVD)
AV 1
SELECTABLE
AV 1
COMPONE
MON.OUT/ZONE OUT
AV OUT
Y
AV 1
AV 2
AV 3
AV 4
PR
A
PHONO
(1 BD/DVD)
PB
AV 1
(1 BD/DVD)
ARC
(1 BD/DVD)
ARC
GND
COMPON
MON.OUT/ZONE OUT
AV OUT
Y
PB
AV 2
PR
B
AV 1
A
PHONO
AUDIO 1
(2 TV)
GND
AUDIO 2
AUDIO 3
AUDIO 4
MULTI C
(3 CD)
AV 2
B
Audio output
(2 TV)
Audio (Coaxial) output
MULTI C
(3 CD)
L
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
AUDIO
L
Ԝ OPTICAL
FRONT
COAXIAL
SURROUND
COAXIAL
R
C
C
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
FRONT
Ԝ OPTICAL ԝ COAXIAL
SURROUND
ANTENNA
FM (4 RADIO) GND AM
75
R
ANTENNA
FM (4 RADIO) GND AM
75
CD player
CD player
We recommend connecting audio devices with a coaxial digital output to the AUDIO2 coaxial digital jack on this
unit. This connection allows you to switch to the AUDIO2 just by pressing the “CD” SCENE key (☞p. 47).
Using optical digital output sources
■ Connecting a turntable
Connect the playback device to the AUDIO1 jack.
Connect the audio output of the turntable to PHONO jacks. J1
DOCK
NETWORK
HDMI OUT
2
1
ARC
SELECTABLE
AV 1
(1 BD/DVD)
ARC
DOCK
NETWORK
HDMI OUT
2
1
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
AV OUT
ARC
COMPONEN
MON.OUT/ZONE OUT
Y
PB
AV 1
AV 1
A
PHONO
AUDIO 3
AV 4
AV 1
(1 BD/DVD)
ARC
AV OUT
COMPONEN
MON.OUT/ZONE OUT
Y
PB
PR
A
PHONO
B
AUDIO 2
AV 3
AV 1
Audio output
AV 2
(2 TV)
AV 2
(1 BD/DVD)
GND
AUDIO 1
SELECTABLE
PR
GND
AUDIO 4
AV 2
MULTI CH
(3 CD)
B
GND
AUDIO 1
(2 TV)
Audio (Optical) output
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH
(3 CD)
L
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
FRONT
AUDIO
SURROUND
R
L
OPTICAL
O
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
O
R
ANTENNA
FM (4 RADIO) GND AM
75
ANTENNA
FM (4 RADIO) GND AM
75
CD player
Turntable
Connect your turntable to the GND terminal of this unit to reduce noise in the signal.
J 1 : When connecting a turntable with a low-output MC cartridge to the PHONO jacks, use an in-line boosting transformer or MC-head amplifier.
En
32
CONNECTIONS
Connecting external components
Connecting game consoles or video camcorders
Connecting a multi-format player or an external decoder
Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as a game console or
video camcorder to the receiver.
Select the V-AUX input to use these connected devices.
This unit has 8 sets of input jacks (FRONT L/R, CENTER, SURROUND L/R, SUR. BACK and
SUBWOOFER) to input multi-channel analog sound signals. If your playback component, such as a
DVD player or SACD player, has multi-channel analog output capability, you can enjoy up to 7.1channel multi-channel sound. To output multi-channel sound, connect the audio output jacks of your
playback component to the MULTI CH INPUT jacks of this unit, and set the input source of this unit to
“MULTI CH.”
■ When connecting an HDMI compatible device
Connect the HDMI output of the device to the HDMI IN jack of the VIDEO AUX.
MULTI CH INPUT
Game
Console,
Video
Camcorder,
etc.
FRONT
L
R
L
SURROUND
SUR. BACK
R
L
CENTER
SUBWOOFER
R
HDMI
HDMI output
HDMI
Center out
Subwoofer out
Surround out
Connect the video and audio outputs of the device to the VIDEO or S-VIDEO, and AUDIO or
OPTICAL jacks of the VIDEO AUX.
Front out
■ When connecting an non-HDMI compatible device
Surround back out
HDMI
Multi-format player/External decoder
(7.1-channel output)
S
VIDEO
V
L
R
O
S-video output
S
Game
Console,
Video
Camcorder,
etc.
Video output
VIDEO
V
AUDIO
L
Analog audio output
R
Audio (Optical) output
OPTICAL
• When you select “MULTI CH” as the input source, the digital sound field processor and tone control are
automatically disabled.
• As this unit does not redirect signals input through the MULTI CH INPUT jacks to compensate for
missing speakers, make appropriate settings on the multi-format player or the external decoder that suit
to the speaker configuration.
• When the input source is switched to “MULTI CH,” images input from a component connected to the
AV1-7 or VIDEO AUX jacks can be displayed on a video monitor (☞p. 80). If your DVD player does
not support multi-channel digital output, connect it to these input jacks.
O
• Be sure to turn down the volume when connecting this unit and the other devices.
• When both the HDMI connection and the analog video/audio connection are performed between the
HDMI compatible device and this unit, only the HDMI signal will be input.
En
33
CONNECTIONS
Connecting external components
Connecting a SCENE link playback-compatible device
Using the Trigger function to link external component power
When the components are the Yamaha products and have the capability of the transmission of the
remote control signals, connect the REMOTE IN and REMOTE OUT jacks to the remote control input
and output jack with the monaural analog mini cable as follows.
When this unit is connected to a Yamaha subwoofer that supports the system connection or the
component with TRIGGER IN jack, you can turn on and off the component by using this unit.
System connection input
HDMI
1
AV 2
AV 3
AV 4
AV 5
AV 6
Remote control in
AV 7
(1 BD/DVD)
TRIGGER
OUT
COMPONENT VIDEO
PR
Y
AV 3
PB
C
PR
Y
MONITOR OUT/ZONE OUT
PB
PR
1
REMOTE
IN
Yamaha component
(CD or DVD player, etc.)
OUT
2
D
AV 4
MULTI CH INPUT
CENTER
+12V 0.1A MAX.
ZONE OUT
PRE OUT
HDMI
2
AV 3
AV 5
AV 6
AV 7
DEO
AV 3
(SINGLE)
RS-232C
AV 4
PB
C
PR
OUT
1
Y
MONITOR OUT/ZONE OUT
PB
PR
1
REMOTE
IN
OUT
2
2
D
AV 4
SURROUND
SUR. BACK
SUBWOOFER
ZONE 2
SURROUND
FRONT
SUR. BACK
SUBWOOFER
UT
CENTER
CENTER
+12V 0.1A MAX.
ZONE OUT
PRE OUT
(SINGLE)
1
SPEAKERS
SURROUND
SURROUND BACK/
BI-AMP
CENTER
FRONT
Remote control out
Yamaha subwoofer
that supports the system
connection
2
ACK
SUBWOOFER
ZONE 2
SURROUND
FRONT
SUR. BACK
SUBWOOFER
CENTER
SPEAKERS
SINGLE
EX
Infrared signal receiver or
Yamaha component
SURROUND
SURROUND BACK/
BI-AMP
CENTER
FRONT
ZONE2/
F.PRESENCE
Trigger input
TRIGGER IN
SINGLE
EXTRA SP
• When a Yamaha component that supports the SCENE link playback function is connected via the
REMOTE OUT jack, playback begins automatically when the SCENE function is used (☞p. 47).
• If the component connected to the REMOTE OUT jack is not a Yamaha product, set “SCENE IR” in the
Scene menu to “Off” (☞p. 82).
Component with the
TRIGGER IN jack
(Power amplifier or
DVD player, etc.)
Functions of the TRIGGER OUT jack can be specified (☞p. 103).
En
34
CONNECTIONS
Connecting external components
Connecting audio/video recording devices
Connecting to the network
This receiver can transmit selected incoming audio/video signals to external components through the
AV OUT jacks. You can record these input audio and video signals to VCRs or similar devices, or send
them to other TVs or external components.
To connect this unit to your network, plug one end of a network cable (CAT-5 or higher straight cable)
into the NETWORK port of this unit, and plug the other end into one of the LAN ports on your router
that supports the DHCP (Dynamic Host Configuration Protocol) server function. To enjoy Internet
Radio or music files saved on PC and DLNA server such as NAS (Network Attached Storage), each
device must be connected properly in the network.
Video / Audio
input
DOCK
NETWORK
HD
HDMI OUT
2
1
ARC
SELECTABLE
AV 1
AV 2
VIDEO
AV 3
(1 BD/DVD)
ARC
V
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
AV OUT
COMPONENT VIDEO
MON.OUT/ZONE OUT
Y
PB
PR
Y
AV 3
PB
C
PR
VIDEO
AV 1
V
A
PHONO
M
Y
GND
AV 2
S
B
D
AV 4
AUDIO 1
(2 TV)
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH INPUT
(3 CD)
CENTER
AUDIO
ZONE OUT
L
L
R
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
S
Ԝ OPTICAL ԝ COAXIAL
R
FRONT
SURROUND
SUR. BACK
SUBWOOFER
NAS
(Network Attached Storage)
Internet
ZONE 2
OPTICAL
SURROUND
O
• Use an STP (shielded twisted pair) cable (commercially available) to connect a network hub or router
and this unit.
• If the DHCP server function on your router is disabled, you need to configure the network settings
manually (☞p. 99).
O
ANTENNA
FM (4 RADIO) GND AM
75
WAN
PC
LAN
VCR/Audio recorder
Modem
HDMI audio/video signals and component video signals cannot be transmitted from these jacks.
Router
Network cable
DOCK
HDMI OUT
2
1
ARC
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
AV OUT
SELECTABLE
AV 1
(1 BD/DVD)
ARC
COMPONEN
MON.OUT/ZONE OUT
Y
PB
PR
AV 1
A
PHONO
GND
AV 2
B
AUDIO 1
(2 TV)
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH
(3 CD)
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
ANTENNA
FM (4 RADIO) GND AM
75
En
35
CONNECTIONS
Connecting external components
Connecting a USB storage device
Connect a USB memory device or USB portable audio player to the USB port on the front panel of this
unit.
USB memory device or
USB portable audio player
NOTE
Be careful that the USB storage device is facing the correct way when inserted into the USB port of
this unit.
En
36
CONNECTIONS
Connecting the FM/AM antennas
An indoor FM antenna and an AM loop antenna are supplied with this receiver. Connect these antennas
properly to their respective jacks.
AM loop antenna
Position the AM antenna away from the receiver. The
wires of the AM antenna have no polarity.
You can connect either wire to the AM jack or the
GND jack.
Indoor FM antenna
DOCK
NETWORK
ARC
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
AV OUT
HD
HDMI OUT
2
1
SELECTABLE
AV 1
AV 2
AV 3
(1 BD/DVD)
ARC
COMPONENT VIDEO
MON.OUT/ZONE OUT
Y
PB
PR
Y
PB
AV 3
C
PR
■ Improving FM reception
We recommend using an outdoor antenna. For more information, consult the nearest authorized
dealer.
■ Improving AM reception
Connect this unit to an outdoor antenna with a 5 – 10 m vinyl-coated wire. Make sure the AM loop
antenna is still connected.
Connecting the GND jack can reduce noise. Connect the jack to a store-bought ground bar or copper
plate with a vinyl-covered wire and bury this new attachment in moist ground.
The GND jack is not to be connected to the ground socket of an electrical outlet.
AV 1
A
PHONO
M
Y
GND
AV 2
B
D
AV 4
AUDIO 1
(2 TV)
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH INPUT
(3 CD)
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
SUR. BACK
CENTER
SUBWOOFER
ZONE OUT
ZONE 2
SURROUND
FM (4 RADIO) GND AM
75
Connecting the AM loop antenna
Press and hold
Insert
Release
Assembling the AM loop antenna
En
37
CONNECTIONS
Setting up the speaker parameters automatically (YPAO)
This unit is equipped with a Yamaha Parametric Room Acoustic Optimizer (YPAO) that adjusts the configuration, size, and volume balance of the speakers in order to provide an optimal sound field.
Using YPAO allows you to automatically configure settings, such as adjusting speaker output and acoustic parameters to suit your listening room (the room in which this unit is placed). J1
Be aware of the following when using YPAO.
• The amount of time for measurement varies from about two to ten
minutes according to settings.
• The test tone is output at high volume. Refrain from using this
function at night when it may be a nuisance to others.
• Take care that the test tone does not frighten small children.
YPAO operations can be viewed on the front panel display or
TV screen.
1
Check the following before using YPAO.
2
Place the supplied YPAO microphone at ear height in
your listening position.
Face the head of the YPAO microphone upwards.
This unit
• The headphones are removed.
YPAO microphone
TV
• This unit is connected to the TV correctly.
• The power is turned on.
• The video input to which the video output from this unit has been
selected.
Subwoofer
• The power is turned on.
• Volume is set to approximately half, and the cross-over frequency (if
present) is set to maximum.
VOLUME
MIN
MAX
CROSSOVER/
HIGH CUT
MIN
When positioning the microphone, we recommend that you use
equipment that allows you to adjust the height (such as a tripod)
as a microphone stand. When using a tripod, use the tripod
screws to fix the microphone in place.
MAX
Subwoofer examples
Power amp assign
• “Power Amp Assign” applies the appropriate speaker settings to this
unit according to speaker configuration.
Refer to “Speaker layout” and “Speaker layout utilizing an external
power amplifier” for details (☞p. 16, p. 23).
3
Switch this unit on.
Continues to the
next page
J 1 : When you have changed the number of speakers or the locations in which they
are installed, first use YPAO to adjust the speaker balance.
En
38
CONNECTIONS
MAIN
Setting up the speaker parameters automatically (YPAO)
ZONE 2
CODE SET
SOURCE RECEIVER
4
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
Connect the YPAO microphone to the YPAO
MIC jack on the front panel.
AUDIO
TUNER
FM
5
Press kCursor B / C to select the “Multi
Position” and press kENTER to set the
number of listening positions to measure.
HDMI OUT
To measure at the multiple listening positions (up to 8),
press kCursor B / C to select “Yes” and press
kENTER.
TUNING
To measure at one listening position, press kCursor
B / C to select “No” and press kENTER.
4
DOCK
PHONO
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
6
Press kCursor B / C repeatedly to select
the “Measure” and press kENTER to start
measurement.
Auto measurement starts in 10 seconds.
• To start the measurement immediately, press
kENTER again.
• To cancel the automatic setup, press kRETURN and
then kENTER.
ENHANCER SUR. DECODE
YPAO
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
OPTION
VOLUME
ENTER
k
M L T . P o s i t i o n
>YesNo
VOLUME
“Mic On View ON SCREEN” appears on the front
panel display, and the following display appears on the
front panel display or TV screen.
Display during measurement
YPAO
M e a s u r i n g . . .
Progress0%
VOLUME
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
1
2
3
5
6
7
9
0
10
INPUT
MUTE
k Cursor B / C
k ENTER
k RETURN
YPAO
M e a s u r e m e n t
ENTERtoStart
VOLUME
4
8
ENT
“Multi Position” is set to “Yes” as the initial factory
settings. If not necessary, skip this step.
This completes preparation. To achieve more accurate
results, take note of the following when measuring
acoustics.
Continues to the
next page
• It takes a few minutes to accurately measure acoustics
for one position. Keep the room as quiet as possible
while acoustics are measured.
• Wait in a corner of the room, or leave it entirely, while
acoustics are measured to avoid creating an
obstruction between the speakers and the YPAO
microphone.
En
39
CONNECTIONS
MAIN
Setting up the speaker parameters automatically (YPAO)
ZONE 2
CODE SET
When “Multi Position” is set to “No” in step 5
The following display appears when measurement
finishes without any problems.
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
AUDIO
3
USB
NET
MULTI
TUNER
SIRIUS
PHONO
YPAO
4
DOCK
M e a s u r e . F i n i s h
Save/Exit
Auto measurement restarts in 10 seconds.
AM
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
YPAO
M e a s u r e . F i n i s h
Save/Exit
VOLUME
The following illustration shows how to place the
optimizer microphone to optimize the setup of this
unit for eight listening positions for example. Up to 8
listening positions can be measured. J1
CATEGORY
FM
The following display appears when measurement at
the last position finishes without any problems.
VOLUME
HDMI OUT
INFO
7
Replace the optimizer microphone at your
choosing position and press kENTER to
restart the automatic measurement.
TUN./CH
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
8
6
4
OPTION
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
k
Go to step 8.
When “Multi Position” is set to “Yes” in step 5
The following display appears when measurement at the
first position finishes without any problems.
YPAO
1
2
3
4
5
6
7
8
9
0
10
M L T . P o s i t i o n 2 ?
>YesNo
21 3
7
5
VOLUME
ENT
Repeat step 7 until the measurement at all listening
positions are made.
NOTE
If a problem occurs, an error message or report is
displayed either during or after acoustic measurement.
Refer to “When an error message is displayed during
measurement” (☞p. 43), or “When a warning
message is displayed after measurement” (☞p. 43) to
resolve the problem and measure acoustics with
YPAO again.
INPUT
Continues to the
next page
MUTE
k ENTER
Go to step 7.
J 1 : Measure from the most frequent listening position, such as
directly in front of the TV, first.
En
40
CONNECTIONS
MAIN
Setting up the speaker parameters automatically (YPAO)
ZONE 2
CODE SET
SOURCE RECEIVER
Result
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
4
USB
NET
MULTI
DOCK
AUDIO
Save/Exit
Displays the results of automatic
acoustics measurement. Refer to
“Reviewing automatic setup parameters”
(☞p. 42) for details.
SAVE
Applies the result to the
speaker setup and
finishes the automatic
measurement. J1
CANCEL
Returns to the previous
screen.
EXIT
Finishes the automatic
measurement without
applying the result to the
speaker setup.
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
PRESET
TUNING
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
4
BD/DVD
TV
CD
RADIO
STRAIGHT PURE DIRECT
SCENE
ON SCREEN
8
Press kCursor B / C to select “Save/Exit”
and press kENTER.
YPAO
S a v e / E x i t
Select:Save
VOLUME
10
Press kENTER.
Automatic setup is completed. Disconnect the
YPAO microphone.
The YPAO microphone is sensitive to heat. When you
have finished measuring, store the microphone out of
direct sunlight, and away from locations that may
experience high temperatures, such as on top of AV
equipment.
OPTION
VOLUME
ENTER
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
k
• When the warning message appears on this display,
refer to “When a warning message is displayed after
measurement” (☞p. 43) for details.
• Press kRETURN to return to the previous screen.
REC
1
2
3
5
6
7
9
0
10
9
Press kCursor D / E to select “SAVE” and
press kENTER.
YPAO
F I N I S H
DisconnectMic
VOLUME
4
8
ENT
INPUT
MUTE
k Cursor B / C / D / E
k ENTER
k RETURN
J 1 : The result of the measurement is assigned to the “Setting Pattern”
currently selected. Refer “Setting Pattern” (☞p. 90) for details on
“Setting Pattern.”
En
41
CONNECTIONS
MAIN
Setting up the speaker parameters automatically (YPAO)
ZONE 2
CODE SET
■ Reviewing automatic setup
SOURCE RECEIVER
parameters
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
4
USB
NET
MULTI
DOCK
The results of automatic acoustics measurement can be
reviewed once measurement is complete.
AUDIO
1
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
PRESET
MUSIC
SLEEP
PARTY
Wiring
The Result menu can be viewed only by performing
the automatic measurement.
STRAIGHT PURE DIRECT
The results of acoustics measurement are displayed.
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
Select the desired menu item (or enable a
function) using kCursor B / C / D / E and
kENTER.
TUNING
ENHANCER SUR. DECODE
MOVIE
Press kCursor B / C repeatedly to select
“Result” and press kENTER immediately
after the automatic measurement.
2
Size
OPTION
VOLUME
ENTER
k
a
c
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
b
1
2
3
4
5
6
7
8
9
0
10
a List of menu items
Menu items available in the Result menu are displayed.
INPUT
c
MUTE
Indicates the number of measurements for multiple
listening positions.
Diagram
Shows the speaker setup and sound adjustment as
diagram.
k Cursor B / C / D / E
k ENTER
k RETURN
Displays the size of the connected
speakers.
• “Large” is displayed when the
connected speaker has the ability to
reproduce the low-frequency signals
effectively.
• “Small” is displayed when the
connected speaker does not have the
ability to reproduce the low-frequency
signals effectively.
Distance
Displays the distance from the listening
position to speakers. The unit for distance
can be switched between “ft” (feet) and
“m” (meter) by pressing kCursor D / E.
Level
Displays the result of the adjustment of
each connected speaker output level.
Setup Reload J1
Clears the fine-adjustment with Manual
Setup and reloads the result of automatic
setup. For details, refer to “Reloading
automatic setup parameters.”
b Number of measurement
ENT
Displays the speakers connected to this
unit and the polarity of each connected
speaker.
• “Normal” is displayed when the
polarity of the connected speaker is
normal.
• “Reverse” is displayed when the
polarity of the connected speaker is
opposite.
3
Press kRETURN to finish the Result menu.
The result of automatic setup can be fine-tuned
manually by “Manual Setup.” Refer to “Manual
speaker setup” (☞p. 90) for details.
■ Reloading automatic setup
parameters
If you are not satisfied with the fine-adjustment of setup
parameters with Manual Setup, the result of automatic
setup saved on this unit can be reloaded. Select “Setup
Reload” in the Result menu.
NOTE
When automatic setup parameters are reloaded,
manually configured settings are cleared. To avoid
clearing manually configured settings by reloading
automatic setup parameters, see “Prohibiting setting
changes” (☞p. 104).
J 1 : This item is displayed after the fine-adjustment is performed with
“Manual Setup.” Use this item to return the settings to the result
of automatic setup.
En
42
CONNECTIONS
MAIN
Setting up the speaker parameters automatically (YPAO)
ZONE 2
CODE SET
■ When an error message is
SOURCE RECEIVER
displayed during measurement
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
AUDIO
See “Error messages” (☞p. 44) for instructions on
resolving the problem and measure acoustics again.
4
3
4
Press kCursor E to select “RETRY.”
Press kENTER to use YPAO again.
■ When a warning message is
displayed after measurement
See “Warning messages” (☞p. 44) for instructions on
resolving the problem. The speaker causing the problem
can be confirmed from the TV screen display.
DOCK
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
PRESET
When “E-5” or “E-9” is displayed:
TUNING
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
OPTION
VOLUME
ENTER
RETURN
Check the error code displayed and use YPAO to
measure acoustics again as described below.
When “E-1,” “E-2,” “E-3,” “E-4” or “E-6” is
k displayed:
1
2
3
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
ENT
INPUT
MUTE
k Cursor B / C / D / E
k ENTER
1
2
3
4
5
Press kENTER.
Press kCursor E to select “EXIT.”
Check that the environment is suitable for
accurate measurement.
Press kCursor D / E to select a option.
PROCEED:
When “E-5” is displayed, measurement can proceed.
However, the measurement in noisy environment may
reduce the accuracy.
When “E-9” is displayed, resume the aborted step.
RETRY:
Restart measurement from the beginning.
Press kENTER to execute the selected
option.
Press kENTER to terminate YPAO, and
switch the unit to standby mode.
4
Check that the speakers are properly
connected.
When “E-10” is displayed:
Turn on the unit and use YPAO again.
When “E-7” or “E-8” is displayed:
1
2
Press kENTER.
Press kENTER.
Check that the environment is suitable for
accurate measurement.
1
2
3
4
Press kENTER.
Press kCursor E to select “EXIT.”
Press kENTER to terminate YPAO, and
switch the unit to standby mode.
NOTE
Although the results of acoustics measurement can be
applied when a warning message is displayed, optimal
sound will not be achieved. Resolving the problem
and using YPAO to measure acoustics again is
recommended.
To exit YPAO with some options
1
2
Use kCursor B / C to select “Save/Exit”
and press kENTER.
Use kCursor D / E to select one of the
following options and press kENTER.
SAVE:
Exits YPAO applying the results of measurement.
CANCEL:
Returns to the previous screen (warning message
screen).
EXIT:
Exits YPAO without saving the results.
Turn on the unit and use YPAO again.
En
43
CONNECTIONS
Setting up the speaker parameters automatically (YPAO)
■ Message list
E-8:
No Signal
NOTE
The YPAO microphone could not
distinguish a test tone.
Check that each speaker has been connected and
installed correctly.
If the following messages appear, resolve the problems that have occurred and carry out the
measurement process again.
The YPAO microphone or the YPAO MIC jack
may be broken. Inquire at the retailer where you
purchased this unit, or the nearest Yamaha service
center.
■ When a warning message is displayed before measurement
Connect MIC!
The YPAO microphone is not connected.
Connect the YPAO microphone to the YPAO
MIC jack on the front panel.
Unplug HP!
The headphones are connected.
Remove the headphones.
Memory Guard!
The settings of this unit are protected.
Set “Memory Guard” in the Setup menu to “Off”
(☞p. 104).
E-9:
User Cancel
You have carried out an operation that has
cancelled the measuring process.
Carry out the measuring process again. Do not
operate this unit by, for example, adjusting the
volume.
E-10:
Internal Error
An internal error has occurred.
Carry out the measuring process again. Contact a
Yamaha service center if “E-10” is displayed
again.
■ Error messages
E-1:
No Front SP
The unit was not able to find the front
channel.
Check that the left and right front speakers are
connected correctly.
E-2:
No Sur. SP
The unit was only able to find one of side of
the surround channels.
Check that the left and right surround speakers
are connected correctly.
E-3:
No F.PRNS SP
The unit was only able to find one of side of
the presence channels.
Check that the left and right presence speakers are
connected correctly.
E-4:
SBR→SBL
Only one surround back speaker is
connected and only the right side surround
back channel sound is detected.
When only one surround back speaker is
connected, connect to the left side (SINGLE)
terminal.
The noise is too loud, preventing accurate
measurements from being taken.
Measure again in quiet surroundings. Turn off any
devices in the room that may be emitting noise, or
place them further away from the YPAO
microphone.
When this message is displayed, selecting
“PROCEED” will allow you to continue
measuring. However, we recommend resolving the
problem and measuring again, as continuing
measurement without doing so will not give
accurate results.
E-5:
Noisy
E-6:
Check Sur.
E-7:
No MIC
Even though surround left and right speakers
are not connected, only the surround back
speakers are connected.
When using surround back speakers, connection of
the surround left/right speakers is necessary.
The YPAO microphone has been removed.
While measuring, take care not to touch the
YPAO microphone.
Check that the YPAO microphone has been
installed correctly.
■ Warning messages
W-1:
Out of Phase
The speakers displayed are connected with
the opposite polarity. Depending on the type
of speakers you are using and the
environment in which you have them
installed, this message may occur even if the
speakers are connected correctly.
Depending on the type of speakers, “W-1” may
display even if the speakers are connected
correctly.
W-2:
Over 24m/80ft
The speakers displayed are separated from
the listening position by more than 24 m,
and cannot be adjusted correctly.
Install the speakers with 24 m of the listening
position.
W-3:
Level Error
Volume level varies greatly for individual
channels, and cannot be adjusted correctly.
Check that all speakers are installed in the same
surroundings.
Check that the speaker polarity + (positive), and (negative) are correct. If these are connected
correctly, you can use the speakers normally even
this message appears.
Check that the speaker polarity + (positive), and (negative) are correct.
We recommend the same speakers or speakers
with as similar specifications as possible.
Adjust the volume of the subwoofer.
If “W-2” or “W-3” appears, you can apply measurement results, but they will not give optimal
results. We recommend that you resolve the problem and carry out the measurement process again.
En
44
PLAYBACK
MAIN
ZONE 2
CODE SET
Basic playback procedure
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
AUDIO
4
DOCK
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
PRESET
d
r
1
2
ENHANCER SUR. DECODE
MUSIC
SLEEP
PARTY
1
2
3
4
BD/DVD
TV
CD
RADIO
Use the dInput selector to select the input
source.
4
Press uVOLUME +/- to adjust the volume.
To mute the output.
Press vMUTE to mute the audio output.
Press vMUTE again to unmute.
■ Selecting the active HDMI OUT jack
Use this function to select the HDMI OUT jack(s) used
to output signal.
Press rHDMI OUT repeatedly to select setting.
The HDMI output setting changes as follows.
The name of the selected input source is displayed on
the front panel display. J1
TUNING
MOVIE
Turn on external components (TV, DVD
player, etc.) connected to this unit.
When USB, NET, DOCK or TUNER is selected, the
content window is displayed (☞p. 59).
STRAIGHT PURE DIRECT
HDMIOUTSel.
OUT1+2
HDMIOUTSel.
OUT1
HDMIOUTSel.
Off
HDMIOUTSel.
OUT2
SCENE
ON SCREEN
3
OPTION
VOLUME
ENTER
RETURN
u
Refer to the instruction manuals provided with the
external component for details on playback.
DISPLAY
TOP
MENU
POP-UP
MENU
Play the external component that you have
selected as the source input, or select a
radio station on the tuner.
MUTE
v
For details on the following operations, refer to the
corresponding pages:
REC
1
2
3
5
6
7
9
0
10
INPUT
MUTE
4
8
ENT
• “FM/AM tuning” (☞p. 60)
• “Playing back tunes on the PC” (☞p. 63)
• “Playing back tunes on the USB storage devices”
(☞p. 65)
• “Listening to the Internet Radio” (☞p. 67)
• “Playing back tunes from your iPod™/iPhone™”
(☞p. 70)
• “Playing back tunes from Bluetooth™ components”
(☞p. 74)
d Input selector
r HDMI OUT
u VOLUME +/v MUTE
OUT 1+2
Outputs the signal at both the HDMI OUT 1
and HDMI OUT 2 jacks simultaneously.
OUT 1
Outputs the signals at the HDMI OUT 1 jack.
OUT 2
Outputs the signals at the HDMI OUT 2 jack.
Off
Any signals are not output at the HDMI OUT 1
and HDMI OUT 2 jacks. Select this setting
when you do not use the video monitor
connected to one of the HDMI OUT jacks.
• The HDMI OUT jack that utilizes the HDMI Control
function can be selected with “Control Select”
(☞p. 97).
• When “HDMI Control” is set to “On,” the HDMI OUT
jack selected with “Control Select” is automatically
enabled in addition to the HDMI OUT jack selected
here by commands from the external component
supporting HDMI Control connected to the jack
(☞p. 97).
• The active HDMI OUT jack(s) can be registered with
the SCENE function (☞p. 81).
J 1 : You can change the input source name displayed on the front
panel display as necessary (☞p. 79).
En
45
PLAYBACK
Basic playback procedure
■ Adjusting high/low-frequency sound
(Tone control)
You can adjust the balance of the high-frequency range (Treble)
and low-frequency range (Bass) of sounds output from the front
left and right speakers to obtain desired tone.
The tone control of the speakers or headphones can be set
separately. Set the headphone tone control with the headphones
connected.
1
Press TONE/BALANCE on the front panel repeatedly
to select “Treble” or “Bass.”
TONE/BALANCE
2
Press PROGRAM l / h to adjust the output level in
the following frequency range.
Adjustable range
-6.0 dB to +6.0 dB
Adjustment
increments
0.5 dB
The display returns to the previous display soon after you release
the key.
• The tone control settings are not effective when this unit is in the
Pure Direct Mode or “MULTI CH” is selected as an input source.
• If you set the balance extremely off, sounds may not match those
from other channels well.
• The tone control can also be adjusted in the Option menu
(☞p. 57).
PROGRAM l / h
The current setting is displayed on the front panel display.
ToneControl
Treble+0.5dB
VOLUME
En
46
PLAYBACK
Changing input settings with a single key (SCENE function)
This unit has a SCENE function that allows you switch this unit on and change input sources, the settings of Audio Select, HDMI Output, Sound Program, Pure Direct Mode, Tone Control, Adaptive
DRC, and Compressed Music Enhancer with one key.
Selecting the SCENE suitable for the external component
At initial factory settings, SCENE functions are configured for the following components. Select a
scene according to the component that you want to play back.
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
SCENE 1
Settings are configured for viewing DVD or Blu-ray Disc content. Press this key and play back content
from the DVD or Blu-ray Disc player connected to the AV1 jack on this unit.
SCENE 2
The settings are configured for viewing a TV content. Press this key and turn on the TV connected to
the AUDIO1 jack on this unit.
SCENE 3
The settings are configured for listening to CD content. Press this key and play back the CD player
connected to the AUDIO2 jack on this unit.
SCENE 4
Settings are configured for listening to a radio station. Press this key and tune into a radio station.
SCENE 5-12
The nothing is registered on the scenes at initial factory setting. The favorite settings can be registered on the
scenes and reloaded by using “Save” and “Load” in Scene menu. For details, refer to “Scene menu” (☞p. 82).
• When switching scenes, also change the external component that the remote control operates
(☞p. 107).
• We recommend that selecting a scene and editing the SCENE function are performed in the Scene menu
(☞p. 81).
• This unit has eight additional scene functions. After selecting one of these scenes, one of the additional
eight scenes may also be selected (☞p. 82).
• Press and hold iSCENE key for about three seconds to register the current setting to the scene.
Four scenes are available for different uses, such as playing movies or music. The following settings such as input sources, sound programs, and HDMI Output are provided at initial factory settings.
Settings that are not checked ( ) are not enabled when a scene key is pressed. Use “Load” in the Scene menu to check settings to be enabled. Refer to “Adjusting settings registered with the SCENE function”
(☞p. 82) for details.
Compressed
Music
Enhancer
CINEMA
DSP 3D
Mode
Dialogue
Lift
Extended
Surround
Video
Processing
Master
Volume
Lipsync
Delay
Setting
Pattern
On
Off
On
0
Auto
Off
-40.0 dB
Auto
0 ms
Pattern1
Natural
Bass: 0.0 dB
Treble: 0.0 dB
On
On
On
0
Auto
Off
-40.0 dB
Auto
0 ms
Pattern1
Natural
STRAIGHT Auto
Bass: 0.0 dB
Treble: 0.0 dB
Off
Off
On
0
Auto
Off
-40.0 dB
Auto
0 ms
Pattern1
Natural
STRAIGHT Auto
Bass: 0.0 dB
Treble: 0.0 dB
Off
On
On
0
Auto
Off
-40.0 dB
Auto
0 ms
Pattern1
Natural
Audio
Select
HDMI
Output
1
AV1
(BD/DVD
Movie Viewing)
Auto
OUT 1+2
Drama
Auto
Bass: 0.0 dB
Treble: 0.0 dB
2
(TV Viewing)
AUDIO1
Auto
OUT 1+2
STRAIGHT Auto
3
(CD Music
Listening)
AUDIO2
Auto
OUT 1+2
4
(Radio
Listening)
TUNER
---
OUT 1+2
Input
SCENE
✓
Sound
Program
✓
Pure Direct
Mode
Tone Control
Adaptive
DRC
✓
PEQ
Select
✓
En
47
PLAYBACK
MAIN
ZONE 2
CODE SET
Enjoying favorite sound field effect
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
4
USB
NET
MULTI
DOCK
AUDIO
HDMI OUT
TUNER
FM
Selecting sound programs and
sound decoders
AM
TUNING
MEMORY
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
4
BD/DVD
TV
CD
RADIO
STRAIGHT PURE DIRECT
Turning on Straight decoding mode (☞p. 49):
Press sSTRAIGHT
This unit offers sound programs in many different
categories suitable for movies, music and other uses.
Choose a sound program that sounds best with the
s source you are playing back, rather than relying on the
name or explanation of the program.
Press sPURE DIRECT
Turning on Compressed Music Enhancer
(☞p. 50):
Press sENHANCER repeatedly
SCENE
ON SCREEN
OPTION
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
1
2
3
5
6
7
9
0
10
INPUT
MUTE
s MOVIE
s MUSIC
s ENHANCER
s SUR. DECODE
s STRAIGHT
s PURE DIRECT
4
Sound program categories
• Sound programs are stored for each input source.
When you change the input source, the sound program
previously selected for that input source is applied
again.
• When you playback DTS Express sources or audio
signals with sampling frequency of higher than
96 kHz, the straight decoding mode (☞p. 49) is
automatically selected.
• When you playback DTS-HD sources with CINEMA
DSP, the DTS decoder is automatically selected.
8
ENT
Enjoying spatial sound with the
CINEMA DSP function
Turning on Pure Direct Mode (☞p. 50):
PHONO
PRESET
INFO
This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. Multi-channel playback from almost any audio source can be enjoyed using a variety
of sound decoders and various sound field effect programs stored on the chip. Sound field effect programs built into this unit are called “sound programs.”
Selecting sound program (☞p. 51):
Movie
MOVIE
Sci-Fi
VOLUME
Program
• You can use the speaker indicators on the front panel
display to check what speakers are currently
outputting sound (☞p. 11).
• You can adjust sound field elements (sound field
parameters) for each of the programs (☞p. 84).
■ Enjoying sound programs without
surround speakers
This unit allows you to use virtual surround speakers to
enjoy sound field surround effects, even without any
surround speakers (Virtual CINEMA DSP mode). You
can even enjoy surround sound presence with just a
minimal configuration of the front speakers only.
This unit will switch to Virtual CINEMA DSP mode
automatically when Surround is set to “None” in
Configuration (☞p. 92). J1
■ Enjoying sound programs with
headphones
Even when headphones are connected, you can enjoy the
reproduction sound field presence with ease (SILENT
CINEMA mode). J2
MOVIE, ENTERTAINMENT category: Press sMOVIE
repeatedly
CLASSICAL, LIVE/CLUB, STEREO category: Press
sMUSIC repeatedly
Selecting stereo reproduction (☞p. 50):
Press sMUSIC repeatedly
Selecting surround decoder:
Press sSUR. DECODE repeatedly
J 1 : However, Virtual CINEMA DSP mode is not available under the
following conditions:
• When headphones are connected to this unit.
• When a “7ch Stereo” or “2ch Stereo” sound program is
selected.
• When Pure Direct Mode or straight decoding mode is selected.
J 2 : However, SILENT CINEMA mode is not available under the
following conditions:
• When a “2ch Stereo” sound program is selected.
• When Pure Direct Mode or straight decoding mode is selected.
En
48
PLAYBACK
MAIN
Enjoying favorite sound field effect
ZONE 2
CODE SET
SOURCE RECEIVER
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
AUDIO
4
DOCK
HDMI OUT
TUNER
■ Enjoying more spatial sound fields
■ Enjoying sound programs without
CINEMA DSP 3D mode creates an intensive and
accurate stereoscopic sound field in the listening room.
Connection of presence speakers is recommended to
take full advantage of the effects of CINEMA DSP 3D
mode. Do the following steps. J1
This unit allows you to use virtual presence speakers to
create an intensive and accurate stereoscopic sound field,
even when no presence speakers are connected (Virtual
CINEMA DSP 3D mode). You can even enjoy surround
sound presence with front speakers, center speaker, and
surround speakers.
This unit automatically switches to Virtual CINEMA
DSP 3D mode when presence speakers are not available.
Do the following steps.
(CINEMA DSP 3D mode)
AV
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
4
BD/DVD
TV
CD
RADIO
PRESET
TUNING
• Connect the presence speakers to the EXTRA SP jacks
and set the speakers to use (☞p. 17).
• Enable CINEMA DSP 3D in the Option menu (☞p. 55).
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
SCENE
ON SCREEN
Music
OPTION
VOLUME
ENTER
RETURN
When a sound program runs in CINEMA DSP 3D mode,
s the CINEMA DSP 3D indicator on the front panel lights
up.
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
CLASSICAL
HallinVienna
VOLUME
presence speakers
• At minimum, connect the front speakers, center speaker,
and surround speakers.
• Enable the center speaker and surround speakers in
“Configuration” (☞p. 91).
• Enable CINEMA DSP 3D in the Option menu (☞p. 57).
Enjoying unprocessed playback
(Straight decoding mode)
Use straight decoding mode when you want to playback
sound without sound field processing. You can playback
as follows in straight decoding mode.
2-channel sources such as CD
Stereo sound plays through the front left and right
speakers.
Multi-channel playback sources such as BD/
DVD
Plays back audio from a playback source without
applying sound field effects, using an appropriate
decoder to split the signal into multiple channels.
Press sSTRAIGHT to enable the straight
decoding mode.
Lights up
REC
1
2
3
5
6
7
9
0
10
STRAIGHT
VOLUME
4
To disable straight decoding mode, press
sSTRAIGHT again.
8
ENT
INPUT
Movie
MUTE
MOVIE
Sci-Fi
VOLUME
Previously selected program
s STRAIGHT
J 1 : However, CINEMA DSP 3D mode is not available under the
following conditions:
• When headphones are connected to this unit.
• When a “7ch Stereo” or “2ch Stereo” sound program is
selected.
• When Pure Direct Mode or straight decoding mode is selected.
En
49
PLAYBACK
MAIN
Enjoying favorite sound field effect
ZONE 2
CODE SET
Enjoying Hi-Fi Sound Quality (Pure
Direct Mode)
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
Use Pure Direct Mode to enjoy the pure high fidelity
sound of the selected source. When Pure Direct Mode is
enabled, this unit plays back the selected source with the
least circuitry. J1
AUDIO
4
DOCK
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
PRESET
Press sPURE DIRECT to turn Pure Direct Mode
on. J2
TUNING
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
s
RETURN
Select “2ch Stereo” from the sound programs when you
want to playback 2-channel stereo sound (from the front
speakers only), regardless of the playback source.
Selecting “2ch Stereo” will playback as follows for the
playback of CD and BD/DVD sources.
2-channel sources such as CD
To disable Pure Direct Mode, press
sPURE DIRECT again.
Enjoying compressed music source
with better sound quality
(Compressed Music Enhancer)
Compressed Music Enhancer improves the sound quality
of the compressed music source closer to its original
depth and width. J3
This mode can be used along with any other DSP modes.
Stereo sound plays back through the front speakers.
Multi-channel sources such as BD/DVD
Playback channels other than the front channels in the
playback source are mixed with the front channels and
played back through the front speakers.
Press sENHANCER to turn Compressed Music
Enhancer on.
EnhancerOn
VOLUME
ENHANCER
Press sMUSIC repeatedly to select “2ch
Stereo.”
OPTION
VOLUME
ENTER
Enjoying stereo playback
Lights up Compressed Music Enhancer is active
DISPLAY
TOP
MENU
POP-UP
MENU
Music
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
STEREO
2chStereo
VOLUME
To disable Compressed Music Enhancer, press
sENHANCER again.
To disable stereo playback, press any of the
sSound selection keys to select a sound program
other than “2ch Stereo.”
ENT
INPUT
MUTE
s Sound selection keys
s MUSIC
s ENHANCER
s PURE DIRECT
J 1 : The following features are disabled in Pure Direct Mode.
• sound program, tone control, PEQ Select, and Adaptive DRC
• displaying and operating the Option menu and ON SCREEN
menu
J 2 : While Pure Direct Mode is on, the front panel display screen turns
off in order to reduce noise. When turning Pure Direct Mode off,
the screen returns on.
J 3 : However, Compressed Music Enhancer is not available in the
following audio:
• Signals of which sampling rate is over 48kHz
• High Definition stream
En
50
PLAYBACK
Enjoying favorite sound field effect
Sound programs
■ Category: ENTERTAINMENT
Sound programs are optimized for video sources such as TV programs and games.
in the table indicates the sound program for CINEMA DSP.
Sports
This program allows the listeners to enjoy stereo sport broadcasts and studio variety
programs with enriched live feeling. In sports broadcasts, the voices of the commentator and
sportscaster are positioned clearly at the center while the atmosphere of the stadium expands
in an optimal space to offer the listeners a feeling of presence in the stadium.
Action Game
This sound field is suitable for action games such as car racing, fighting games and FPS
games. The reality of, and emphasis on, various effects makes the player feel like they are
right in the middle of the action, allowing for greater concentration.
Use this program in combination with Compressed Music Enhancer for a more dynamic and
strong sound field.
Roleplaying Game
This sound field is suitable for role-playing and adventure games. This program adds depth
to the sound field for natural and realistic reproduction of background music, special effects
and dialogue from a wide variety of scenes.
Use this program in combination with Compressed Music Enhancer for a more clear and
spatial sound field.
Music Video
This sound field offers an image of a concert hall for live performance of pop, rock and jazz
music. The listener can indulge oneself in a hot live space thanks to the presence sound field
that emphasizes the vividness of vocals and solo play and the beat of rhythm instruments,
and to the surround sound field that reproduces the space of a big live hall.
■ Category: CLASSICAL
This sound field is suitable when listening to music sources such as CDs.
Hall in Munich
This sound field simulates a concert hall with approximately 2500 seats in Munich, using
stylish wood for the interior finishing as normal standards for European concert halls. Fine,
beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual
seat is at the center left of the arena.
Hall in Vienna
This is an approximately 1700-seat, middle-sized concert hall with a shoebox shape that is
traditional in Vienna. Pillars and ornate carvings create extremely complex reflections from
all around the audience, producing a very full, rich sound.
Chamber
This program creates a relatively wide space with a high ceiling like an audience hall in a
palace. It offers pleasant reverberations that are suitable for courtly music and chamber
music.
■ Category: LIVE/CLUB
This sound field is suitable when listening to music sources such as CDs.
Cellar Club
This program simulates a live house with a low ceiling and homey atmosphere. A realistic,
live sound field features powerful sound as if the listener is in a row in front of a small stage.
The Roxy Theatre
This is the sound field of a rock music live house in Los Angeles, with approximately 460
seats. The listener’s virtual seat is at the center left of the hall.
The Bottom Line
This is the sound field at stage front in The Bottom Line, a famous New York jazz club once.
The floor can seat 300 people to the left and right in a sound field offering real and vibrant
sound.
En
51
PLAYBACK
Enjoying favorite sound field effect
■ Category: MOVIE
■ Category: STEREO
Sound programs optimized for viewing video sources such as movies.
Sound programs are optimized for listening to stereo sources.
Standard
This program creates a sound field emphasizing the surround feeling without disturbing the
original acoustic positioning of multi-channel audio such as Dolby Digital and DTS. It has
been designed with the concept of an ideal movie theater, in which the audience is
surrounded by beautiful reverberations from the left, right and rear.
Spectacle
This program represents the spectacular feeling of large-scale movie productions. It
reproduces a broad theater sound field that matches cinemascope and wider-screen movies
with an excellent dynamic range providing everything from very small sound effects to
large, impressive sounds.
Sci-Fi
This program clearly reproduces the finely elaborated sound design of the latest science
fiction and special effects-featuring movies. You can enjoy a variety of cinematographically
created virtual spaces reproduced with clear separation between dialogue, sound effects and
background music.
Adventure
Drama
Mono Movie
This program is ideal for precisely reproducing the sound design of action and adventure
movies. The sound field restrains reverberations but puts emphasis on reproducing a
powerful space expanded widely to the left and right. The reproduced depth is also
restrained relatively to ensure the separation between audio channels and the clarity of the
sound.
This sound field features stable reverberations that match a wide range of movie genres from
serious dramas to musicals and comedies. The reverberations are modest but offer an
optimum 3D feeling, reproducing effects tones and background music softly but cubically
around clear words and center positioning in a way that does not fatigue the listener even
after long hours of viewing.
This program is provided for reproducing monaural video sources such as a classic movie in
an atmosphere of a good old movie theater. The program produces the optimum expansion
and reverberation to the original audio to create a comfortable space with a certain sound
depth.
2ch Stereo
Use this program to mix down multi-channel sources to 2-channels. When multi-channel
signals are input, they are down mixed to 2-channels and output from the front left and right
speakers.
7ch Stereo
Use this program to output sound from all speakers. When you playback multi-channel
sources, this unit down-mixes the source to 2-channels, and then outputs the sound from all
speakers. This program creates a larger sound field and is ideal for background music at
parties, etc.
■ Category: SUR.DECODE (Surround decode mode)
Select this program to playback sources with selected decoders. You can playback 2-channel audio
sources in up to 7-channels using a surround decoder.
q Pro Logic
Reproduces sound using the Dolby Pro Logic decoder. This is suitable for all kinds of audio
sources.
q PLIIx Movie /
q PLII Movie
Reproduces sound using the Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder. This is
suitable for movies. J1
q PLIIx Music /
q PLII Music
Reproduces sound using the Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder. This is
suitable for music. J1
q PLIIx Game /
q PLII Game
Reproduces sound using the Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder. This is
suitable for games. J1
Neo:6 Cinema
Reproduces sound using the DTS Neo:6 decoder. This is suitable for movies.
Neo:6 Music
Reproduces sound using the DTS Neo:6 decoder. This is suitable for music.
J 1 : You cannot select the Dolby Pro Logic IIx decoder in the following conditions:
• When “Surround Back” is set to “None” (☞p. 92).
• When headphones are connected.
En
52
PLAYBACK
MAIN
ZONE 2
Controlling this unit while viewing the TV screen
CODE SET
SOURCE RECEIVER
This unit features a sophisticated on-screen display (OSD) that helps you to control the amplifier function of this unit. With the OSD, you can view information of the
signals being input and the status of this unit. Visual guidance simplifies operations for menus.
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
4
USB
NET
MULTI
DOCK
AUDIO
Basic operations via the TV screen
display
HDMI OUT
TUNER
2
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
The input source is selected.
2
Use kCursor D / E to select a scene and
press kENTER.
The scene is selected.
A TV screen is required to display the ON SCREEN
or Option menu. Refer to “Connecting a TV monitor”
for instructions on connecting a TV screen (☞p. 25).
TUNING
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
Use kCursor D / E to select a Input source
press kENTER.
This section describes basic operations for configuring
j “Input,” “Scene” and “Sound Program” using the OSD.
OPTION
VOLUME
ENTER
k
Press jON SCREEN.
The ON SCREEN menu is displayed on the TV screen.
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
■ Selecting an input source
1
1
2
3
5
6
7
9
0
10
Use kCursor B / C to select “Input” and
press kENTER.
4
8
ENT
INPUT
• Pressing kRETURN displays the previous menu
screen. Press kRETURN repeatedly to close the ON
SCREEN menu.
• In addition to selecting an input source, detailed
settings for each input source can be configured. Refer
to “Configuring input sources (Input menu)” (☞p. 78)
for details.
■ Selecting a scene
MUTE
1
j ON SCREEN
k Cursor B / C / D / E
k ENTER
k RETURN
• Pressing kRETURN displays the previous menu
screen. Press kRETURN repeatedly to close the ON
SCREEN menu.
• Refer to “Changing input settings with a single key
(SCENE function)” (☞p. 47) for details on the default
scene settings.
• Detailed SCENE function settings can be edited. Refer
to “Editing the SCENE function (Scene menu)”
(☞p. 81) for details.
Use kCursor B / C to select “Scene” and
press kENTER.
Input source icons are displayed at the bottom of the
TV screen.
Scene icons are displayed at the bottom of the TV
screen.
En
53
PLAYBACK
MAIN
Controlling this unit while viewing the TV screen
ZONE 2
CODE SET
■ Selecting a sound program
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
1
AUDIO
Use kCursor B / C to select “Sound
Program” and press kENTER.
4
DOCK
NOTES
Menus can be operated and the status of this unit
confirmed from the following three main displays.
• ON SCREEN menu (☞p. 78)
• Option menu (☞p. 55)
• Content window (☞p. 59)
HDMI OUT
TUNER
FM
PHONO
These menus and status features can be used to
configure more various functions in addition to
selecting “Input,” “Scene” and “Sound Program.”
Refer to each references for details on menus and
status.
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
TUNING
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
Sound program icons are displayed at the bottom of the
TV screen.
OPTION
VOLUME
ENTER
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
k
2
Use kCursor D / E to select a sound
program and press kENTER.
The sound program is selected.
REC
1
2
3
5
6
7
9
0
10
4
8
ENT
INPUT
MUTE
k Cursor B / C / D / E
k ENTER
k RETURN
• Pressing kRETURN displays the previous menu
screen. Press kRETURN repeatedly to close the ON
SCREEN menu.
• Refer to “Enjoying favorite sound field effect” (☞p. 48)
for various sound programs.
• You can configure the detailed settings for each sound
program. Refer to “Setting sound program parameters
(Sound Program menu)” (☞p. 84) for details.
En
54
PLAYBACK
MAIN
ZONE 2
Configuring settings specific to an individual input source (Option menu)
CODE SET
SOURCE RECEIVER
This unit has a unique Option menu for each input source. Option menus can be used to enable features such as volume trim for compatible input sources or to display
audio/video data.
AV
1
2
3
4
7
V-AUX
5
6
1
2
3
4
USB
NET
MULTI
DOCK
AUDIO
d
HDMI OUT
TUNER
Option menu operations are displayed on the front panel
display or TV screen. TV display is used here to explain
operation.
PHONO
FM
AM
INFO
MEMORY
PRESET
Option menu display and setup
TUNING
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
4
BD/DVD
TV
CD
RADIO
STRAIGHT PURE DIRECT
SCENE
ON SCREEN
t
OPTION
VOLUME
ENTER
POP-UP
MENU
Use dInput selector to select an input
source to which options will be applied.
Press tOPTION.
The Option menu is displayed.
Use kCursor B / C to select the desired
setting and press kENTER.
5
Press tOPTION to close the Option menu.
Parameters of the selected item are displayed.
4
Use kCursor D / E to select the desired
item (or enable a function).
The keys on the remote control may not respond for a
few seconds after the Option menu is closed. Should
this occur, select the input source again.
• Press kRETURN to display the previous screen or
close the Option menu.
• The Option menu may close automatically when some
functions are enabled.
k
Option menu
DISPLAY
TOP
MENU
1
2
3
MUTE
REC
1
2
3
5
6
7
9
0
10
4
8
ENT
INPUT
MUTE
The displayed Option menu settings differ depending
on the input source.
For more information, refer to the “Option menu” on
the next page.
d Input selector
k Cursor B / C / D / E
k ENTER
k RETURN
t OPTION
En
55
PLAYBACK
Configuring settings specific to an individual input source (Option menu)
Option menu
The following items are provided for each input source. “✓” indicates the available menu for each input source. J1
AV1-4
AV5-7
V-AUX
AUDIO1-4
PHONO
Tone Control
✓
✓
✓
✓
Adaptive DRC
✓
✓
✓
CINEMA DSP 3D Mode
✓
✓
Dialogue Lift J2
✓
✓
Extended Surround
✓
Volume Trim
✓
Audio Select
✓
MULTI CH
USB
PC
NET RADIO
DOCK (iPod)
DOCK (Bluetooth)
TUNER
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓ J3
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓ J3
✓ J3
Shuffle
✓
✓
✓ J4
Repeat
✓
✓
✓ J4
✓
Connect
✓
Disconnect
✓
Pairing
✓
J 1 : When “Tone Control,” “Adaptive DRC,” “CINEMA DSP 3D Mode,”
“Dialogue Lift,” or “Extended Surround” is adjusted for an input source, the
same value is applied to other input sources and “ALL” is displayed on the
front panel display. When settings specific to a certain input source are
selected, the input source name is displayed on the front panel display. If the
name of the input source has been changed (☞p. 79), the original name of the
input source is displayed.
J 2 : “Dialogue Lift” can be adjusted only when the presence speakers are available.
J 3 : This function is only available when “Coax/Opt” is assigned to this input
J 4 : Not available for Yamaha iPod wireless receiver.
source from “Input Assignment” in the Setup menu. Refer to “Assigning
component input and output jacks” (☞p. 102) for details.
En
56
PLAYBACK
Configuring settings specific to an individual input source (Option menu)
■ Adjusting high/low-frequency sound
Tone Control
■ Enjoying more spatial sound fields
CINEMA DSP 3D Mode
You can adjust the balance of the high-frequency range (Treble)
and low-frequency range (Bass) of sounds output from the front
left and right speakers to obtain desired tone.
Adjustable range
-6.0 dB to +6.0 dB
Adjustment
increments
0.5 dB
When CINEMA DSP 3D is enabled, set whether to use sound
programs in CINEMA DSP 3D mode (☞p. 49).
■ Adjusts the vertical position of dialogues
• “Dialogue Lift” can be adjusted only when the presence speakers
are available.
• You cannot move the dialog position lower than the default
setting.
■ Selecting the 5.1-channel signal playback
method
Dialogue Lift
Extended Surround
■ Auto-adjusting the sound level to make
Adjusts the vertical position of center sound such as dialogues
when presence speakers are used. Increasing this parameter raises
the position.
even low volumes more audible
Selects whether to reproduce 5.1-channel input signals in 6.1- or
7.1-channel when surround back speakers are used. J2
Auto (Default)
Automatically selects the most suitable decoder if a
flag for reproducing surround back channel is present,
and reproduces the signals in 6.1- or 7.1-channel.
The ideal dialog
position
q PLIIx Movie
If the dialog seems to come out from a lower position than the
video monitor screen, increase this parameter.
Always reproduces signals in 7.1-channel using the
Dolby Pro Logic IIx Movie decoder whether or not
surround back channel signals are contained. You can
select this parameter when two surround back
speakers are connected.
q PLIIx Music
Always reproduces signals in 6.1- or 7.1-channel
using the Dolby Pro Logic IIx Music decoder whether
or not surround back channel signals are contained.
You can select this parameter when one or two
surround back speakers are connected.
EX/ES
Automatically selects the most suitable decoder for
input signals whether or not the flag for reproducing
surround back channel is present, and always
reproduces signals in 6.1-channel.
Off
Always reproduces original channels whether or not
the flag for reproducing surround back channel is
present.
Adaptive DRC
Adjusts the dynamic range in conjunction with the volume level
(from minimum to maximum). When this item is set to “On,”
dialogue and sound effects are clearer. J1
On
Adjusts the dynamic range automatically.
Off (Default)
Does not adjust the dynamic range automatically.
When “On” is selected, the dynamic range is adjusted as follows.
If the volume level is low, the dynamic range is narrow.
If the volume level is high, the dynamic range is wide.
On
Off
Input Level
Volume: low
Output Level
Output Level
Move up to the ideal
dialog position
On
Off
“0” (default) corresponds to the lowest position and “5” to the
highest position.
Input Level
Volume: high
J 1 : “Adaptive DRC” is also effective when you use headphones.
J 2 : AV5-6 or AUDIO1-2 are available when “Audio Return Channel” is on, and
the input source is used for “TV Audio Input.”
En
57
PLAYBACK
Configuring settings specific to an individual input source (Option menu)
■ Adjusting volume between input sources
Volume Trim
■ Shuffle playback
Shuffle
Reduces any change in volume when switching between input
sources by correcting volume differences in each input source. You
can adjust this parameter for each input source.
Pairing
Plays back songs or albums in random order. When the shuffle
function is enabled, “
” appears on the TV screen. J1
Off
The shuffle function is turned off.
-6.0 dB to +6.0 dB
On J2
The shuffle function is tuned on.
Default setting
0.0 dB
Songs J3
Plays songs back in random order.
Adjustment
increments
0.5 dB steps
Albums J3
Plays albums back in random order.
Adjustable range
■ Selecting audio input jacks
Audio Select
Select the audio input jack through which source signal is input
when an input source is connected to more than one jack.
Auto (Default)
Automatically selects input signals in the following
order:
(1) HDMI
(2) Digital signals
(3) Analog signals
■ Pairing Bluetooth component
Performs pairing of this unit and a Bluetooth component (☞p. 74).
■ Repeat playback
Repeat
Plays songs or albums repeatedly. When the repeat function is
enabled, “
(Single / One[iPod])” or “
(All)” appears on
the TV screen. J1
Off
The repeat function is turned off.
Single / One[iPod]
Plays a song back repeatedly.
All
When all songs have completed playback, returns to
the start and repeats playback.
■ Connect / Disconnect Bluetooth
HDMI
Selects only HDMI signals. When HDMI signals are
not input, no sound is output.
Coax/Opt
Selects only coaxial or optical signal. When no signal
is input, no sound is output.
Connect
Analog
Selects only analog signals. If no analog signals are
input, no sound is output.
Disconnect
component
Switches communication with a Bluetooth component on and off
(☞p. 74).
J 1 : Not available for Yamaha Wireless System for iPod.
J 2 : This item is displayed only when PC or USB is selected as input source.
J 3 : This item is displayed only when DOCK (iPod) is selected as input source.
En
58
PLAYBACK
MAIN
ZONE 2
Confirming and operating input sources from the content window
CODE SET
SOURCE RECEIVER
When USB, NET, DOCK or TUNER is selected, the content window is displayed on the TV screen. Playback style for iPod, functions for FM/AM tuner, Internet Radio,
PC, and USB can be set in the content window.
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
AUDIO
4
DOCK
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
PRESET
TUNING
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
d
A TV screen is required to display the content
window. Refer to “Connecting a TV monitor” for
instructions on connecting a TV monitor (☞p. 25).
Displaying the content window on
the TV screen
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
OPTION
VOLUME
ENTER
RETURN
Press dUSB, dNET, dDOCK or dTUNER to
display the content window.
The content window consists of two main displays, the
k Now Playing view and the Browse view.
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
Below is the example of the Now Playing view for DOCK
(iPod).
REC
1
2
3
4
5
6
7
8
9
0
10
c Screen button area
Buttons to operate each input source are displayed here.
These buttons vary depending on the selected input. For
details on operations for each input, see the following.
– FM/AM stations (☞p. 61)
– PC servers (☞p. 64)
– USB storage (☞p. 66)
– Internet Radio (☞p. 68)
– iPod (☞p. 71)
• In the Now Playing view, press kENTER and use
kCursor B / C to select a button. Then press
kENTER to execute the selection.
• In the Browse view, press kCursor E and use
kCursor B / C to select a button. Then press
kENTER to execute the selection.
• Press kRETURN repeatedly to exit from the
operation.
Switching the display between the
Now Playing view and the Browse
view
ENT
INPUT
MUTE
a
d USB
d NET
d DOCK
d TUNER
k Cursor B / C / D / E
k ENTER
k RETURN
k DISPLAY
b
c
a Image display
Icon for each input source or album art is displayed.
b Information display
Information on the current input source is displayed.
You can switch the display between the Now Playing
view and the Browse view by the following methods.
• Press kDISPLAY to cycle between the Now
Playing view and the Browse view.
Browse view
or
kDISPLAY
or
kDISPLAY
Now Playing view
When selecting “DOCK (iPod)” as input source and
playing back video content of iPod/iPhone, the screen
switches as follows by pressing kDISPLAY
repeatedly.
Now Playing view → Browse view →
Video playback screen (content window disappears)
→ Now Playing view
• In the Now Playing view, press kENTER and
use kCursor B / C to select the
icon.
Then press kENTER to switch to the Browse
view.
• In the Browse view, press kCursor E and use
kCursor B / C to select the
icon. Then
press kENTER to switch to the Now Playing
view.
En
59
PLAYBACK
MAIN
ZONE 2
FM/AM tuning
CODE SET
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
AUDIO
4
d
DOCK
Selecting a frequency for reception
(Normal tuning)
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
PRESET
TUNING
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
4
BD/DVD
TV
CD
RADIO
e
STRAIGHT PURE DIRECT
SCENE
ON SCREEN
OPTION
Press dTUNER to switch to the tuner input.
Press eFM or eAM to select a band to
receive.
POP-UP
MENU
3
Use eTUNING H / I to set a frequency to
receive.
eTUNING H
Increases the frequency. Press and hold this key for
longer than a second to search automatically for a station
on a higher frequency than the current one. J1
eTUNING I
Decreases the frequency. Press and hold this key for
longer than a second to search automatically for a station
on a lower frequency than the current one. J1
Lights up when a broadcast is received
from a station
STEREO TUNED
DISPLAY
TOP
MENU
1
2
VOLUME
ENTER
RETURN
When using the FM/AM tuner, adjust the direction of
the FM/AM antenna connected to this unit to get the
best reception.
ENHANCER
MUTE
FM87.5MHz
STEREO TUNED
VOLUME
ENHANCER
FM98.5MHz
VOLUME
Lights up when a stereo broadcast is received
2
3
4
5
6
7
8
9
0
10
Select stations manually and register them as presets
individually.
1
Tune in to the station you want to
register, referring to “Selecting a
frequency for reception (Normal tuning).”
2
Use one of the following methods to
register the station you are currently
receiving.
■ Registering to a preset number to which
no station is registered
REC
1
■ Registering stations manually (Manual
Preset)
Press eMEMORY for 3 seconds or longer.
The station will be registered automatically to the
lowest open preset number (or the next number after
the one registered most recently).
Registered frequencies
■ Entering a frequency number
m
In normal tuning mode, use the mNumeric keys to
enter a frequency. Leave the decimal point out when
entering a number. J2
For example, enter as follows to select a station on
98.5 MHz.
ENT
INPUT
MUTE
9
8
5
Preset
STEREO TUNED
ENHANCER
01:FM98.5MHz
Memorized
VOLUME
Continues to the
next page
d TUNER
e FM
e AM
e MEMORY
e TUNING H / I
m Numeric keys
J 1 : When searching for a station, release the key once the search has
started.
J 2 : “Wrong Station!” appears on the front panel display when you
enter a frequency that is out of receivable range. Make sure that
the frequency entered is correct.
En
60
PLAYBACK
MAIN
FM/AM tuning
ZONE 2
CODE SET
Navigating the FM/AM tuner from
the content window
SOURCE RECEIVER
■ Designating a preset number for
registration
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
Press eMEMORY once, to display “Manual Preset”
on the front panel display. After a small wait, the
preset number that the station has been registered to
will appear. J1
AUDIO
4
DOCK
HDMI OUT
TUNER
d
PHONO
Preset number
FM
AM
INFO
MEMORY
PRESET
TUNING
Blinks
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
e
Preset
STRAIGHT PURE DIRECT
STEREO TUNED
SCENE
ENHANCER
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
VOLUME
POP-UP
MENU
VOLUME
The station currently received can be confirmed from the
menu displayed on the TV screen. Various FM/AM tuner
operations can be performed from the content window
rather than controls on the front panel display. The
content window is displayed when dTUNER is
pressed.
You can operate the FM/AM tuner from the Now
Playing view or the Browse view.
■ Operating from the Now Playing
view
k
DISPLAY
TOP
MENU
01:Empty
FM98.5MHz
g
The newly registered frequency
OPTION
ENTER
Empty, or the frequency
registered most
previously
MUTE
Press ePRESET F / G to select the preset number
to register the station to, and then press eMEMORY
to register.
d
2
3
4
m
5
6
7
9
0
10
To select a registered station, press
ePRESET F / G to select the preset number
of the station. J2
The frequency currently received is displayed as a cursor
on the bar.
Screen button area
Buttons for available operations are displayed. See
“Screen buttons on the Now Playing view” for details.
Screen buttons on the Now Playing view
To use these buttons, first press kENTER. Then select
the desired one with kCursor B / C and kENTER.
Manual Tuning
You can tune in to a desired FM/AM station by
specifying its frequency.
FM
Switches a band to FM.
AM
Switches a band to AM.
c
e
Tuning -
Decreases the frequency.
Tuning +
Increases the frequency.
g
Auto -
Automatically searches for a station on a
lower frequency than the current station.
Auto +
Automatically searches for a station on a
higher frequency than the current station.
Direct
Selects the frequency manually.
Memory
Registers the station currently received as
a preset station. Up to 40 FM/AM stations
can be registered.
a b
REC
1
f Frequency guide
8
f
ENT
INPUT
a Tuned indicator
MUTE
Lights up when a station is received.
b Stereo indicator
c
d TUNER
e MEMORY
e PRESET F / G
k Cursor B / C
k ENTER
k RETURN
m Numeric keys
d
e
J 1 : Press kRETURN or wait with no operation for 30 seconds to
exit the Manual Preset mode.
Lights up when a stereo broadcast is received. When “FM
Mode” is set to “Mono,” the indicator does not light.
Preset number
The selected preset number is displayed.
Band
The selected band (FM or AM) is displayed.
Frequency
The frequency currently received is displayed.
J 2 : To select a station by selecting a preset number, use the
mNumeric keys to enter the preset number of the station you
want to listen. When an invalid number is entered, “Wrong Num.”
appears on the front panel display. Check that you have entered
the correct number.
En
61
PLAYBACK
MAIN
FM/AM tuning
ZONE 2
CODE SET
■ Operating from the Browse view
SOURCE RECEIVER
Preset Select
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
4
Preset -
Selects the previous preset number.
USB
NET
MULTI
DOCK
Preset +
Selects the next preset number.
Preset -8
Returns the previous page.
Preset +8
Goes to the next page.
Memory
Registers the station currently received as
a preset station. Up to 40 FM/AM stations
can be registered.
Direct
Selects a station directly by entering the
preset number.
1 Page Up
You can call preset stations.
1 Page Down
AUDIO
Scrolls the list to the next or previous page.
HDMI OUT
TUNER
FM
PHONO
AM
PRESET
INFO
MEMORY
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
4
BD/DVD
TV
CD
RADIO
STRAIGHT PURE DIRECT
SCENE
ON SCREEN
VOLUME
ENTER
k
Utility
DISPLAY
TOP
MENU
POP-UP
MENU
Switches the display to the Now Playing view.
a
b
a Preset station list
The list of preset stations is displayed.
b Screen button area
Buttons for available operations are displayed. See
“Screen buttons on the Browse view” for details.
OPTION
RETURN
Now Playing
TUNING
Screen buttons on the Browse view
MUTE
FM Mode
Selects “Stereo” or “Mono” when
receiving the FM station (☞p. 60).
REC
1
2
3
4
5
6
7
8
9
0
10
Scroll
MUTE
k Cursor B / C / D / E
k ENTER
Utility
Switches the scroll target.
ENT
INPUT
To use these buttons, first press kCursor E. Then
select the desired one with kCursor B / C and
kENTER.
Auto Preset
Detects FM stations with a strong signal
and automatically registers up to 40 FM
stations, beginning with the next number
after the current number (☞p. 62). AM
stations cannot be registered by using
“Auto Preset.”
Clear Preset
Clears registration of the preset station
highlighted in the preset station list.
Clear All Preset
Clears registration of all preset stations.
Browse
Switches the display to the Browse view.
En
62
PLAYBACK
MAIN
ZONE 2
Playing back tunes on the PC
CODE SET
SOURCE RECEIVER
You can enjoy playback of audio files stored on PCs connected to this unit via your network. To play back audio files on your PC, you need to install Windows Media
Player on the PC and configure the media sharing setting of Windows Media Player.
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
4
USB
NET
MULTI
DOCK
AUDIO
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
If you do not use a DHCP server, configure the
d network parameters (IP address, etc.) of this unit
manually (☞p. 99).
TUNING
Windows Media Player setup
Playback of PC music contents
Screen buttons on the Browse view
For a complete list of status messages that appear on
the front panel display and GUI screen, see “USB and
Network” (☞p. 125).
To use these buttons, first press kCursor E. Then
select the desired one with kCursor B / C and
kENTER.
10 Pages Up
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
1
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
OPTION
VOLUME
ENTER
k
Install Windows Media Player on your PC.
You can download the installer of Windows Media
Player from the Microsoft website, or use the upgrade
function of the installed Microsoft Windows Media
Player.
The PC music contents can be operated from the menu
displayed on the TV screen.
You can operate the PC contents from the Now Playing
view or the Browse view.
■ Operating from the Browse view
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
1
2
3
5
6
7
9
0
10
2
Activate Windows Media Player first, enable the media
sharing and then select this unit as a device to which
the media is shared.
4
8
ENT
INPUT
MUTE
d NET
k Cursor B / C / D / E
k ENTER
k RETURN
NOTES
• Some security software installed on your PC (antivirus software, firewall software, etc.) may block the
access of this unit to your PC. In such cases, configure
the security software appropriately.
• You can connect this unit to up to 16 PC servers, and
each server must be connected to the same subnet as
this unit.
e
f
h
1 Page Up
Scrolls the list to the next or previous page.
d
g
h
a
b
c
d
e
f
g
Goes to 10 pages forwards or backwards.
1 Page Down
a b c
Turn on your PC then allow media sharing.
10 Pages Down
Repeat icon
Shuffle icon
Play icon
Current directory name
Menu items
Album art / Input icon
Screen button area
Buttons for available operations are displayed. See
“Screen buttons on the Browse view” for details.
Current menu number / Number of all menu items
Now Playing
Switches the display to the Now Playing view.
1
2
Press dNET repeatedly to select “PC” as
the input source.
Press kCursor B / C to select a PC server
and music file to play back.
• To select a PC server, folder or file, press
kCursor B / C.
• To confirm the selection, press kENTER.
• To return to the previous menu, press kRETURN.
3
Press kENTER to start playback.
The Now Playing view appears during playback.
En
63
PLAYBACK
MAIN
Playing back tunes on the PC
ZONE 2
CODE SET
■ Operating from the Now Playing
SOURCE RECEIVER
view
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
a b c
AUDIO
AM
INFO
MEMORY
PRESET
Play Control
Operates the basic playback functions of PC.
DOCK
PHONO
FM
To use these buttons, first press kENTER. Then select
the desired one with kCursor B / C and kENTER.
4
HDMI OUT
TUNER
Screen buttons on the Now Playing view
TUNING
f
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
4
BD/DVD
TV
CD
RADIO
STRAIGHT PURE DIRECT
e
f
d
h
i
g
p (Play)
Starts playback.
s (Stop)
Stops playback.
e (Pause)
Stops playback temporarily.
b (Skip -)
Skips to the beginning of the currently
playing song. Press kENTER at the
beginning of the song to skip to a previous
song.
a (Skip +)
Skips to the beginning of the next song.
SCENE
ON SCREEN
OPTION
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
INPUT
MUTE
f INFO
k Cursor B / C
k ENTER
lp
ls
le
la
lb
10
ENT
a
b
k
c
d
e
f
l g
h
i
Repeat icon
Shuffle icon
Play icon
Album image
Artist name
Album title
Screen button area
Buttons for available operations are displayed. See
“Screen buttons on the Now Playing view” for details.
Song title
Elapsed time
• You can switch the information displayed on the front
panel display by pressing fINFO (☞p. 11).
• Album images are available only when the file
contains image data.
■ Compatibility of Digital Media
Controller
A DLNA-compliant Digital Media Controller (DMC)
device can also be used to control music playback. Refer
to “Using a PC to control this unit over a network”
(☞p. 80) for details. J1, J2
CAUTION
When DMC controls are used to adjust volume,
playback volume may be unexpectedly loud. This
could result in damage to this unit or the speakers.
“Max Volume” can be used to specify the maximum
volume level to prevent excessively loud playback
(☞p. 95).
■ Operating basic playback functions
with the remote control
Scroll
Switches the scroll target (artist name, album title, or
song title).
Browse
Switches the display to the Browse view.
Use the following remote control keys to operate
(playback, stop, skip, etc.) your PC contents.
lp
Play
ls
Stop
le
Switches between playback and pause.
la
Skip forward during playback
lb
Skip backward during playback
■ Shuffle/repeat playback
Use the Option menu to apply playback shuffle and
repeat settings. Refer to “Shuffle playback” (☞p. 58)
and “Repeat playback” (☞p. 58) for details.
J 1 : A shortcut button cannot be registered when a DMC is used.
J 2 : Set “DMC Control” to “Disable” to automatically play back the
last song played when this unit is turned on.
En
64
PLAYBACK
MAIN
ZONE 2
Playing back tunes on the USB storage devices
CODE SET
SOURCE RECEIVER
You can enjoy playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC and FLAC files stored on your USB memory device or USB portable player connected
to the USB port on the front panel of this unit. This unit supports USB mass storage class devices (FAT 16 or FAT 32 format, except USB HDDs).
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
4
USB
NET
MULTI
DOCK
AUDIO
d
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
4
BD/DVD
TV
CD
RADIO
PRESET
TUNING
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
SCENE
ON SCREEN
• You can play back only the files stored in the first
partition.
• Some files may not be playable depending on models
and types of USB storage devices.
• For a complete list of status messages that appear on
the front panel display and GUI screen, see “USB and
Network” (☞p. 125).
• This unit is compatible with sampling frequency of up
to 48 kHz for the USB storage device.
Playback of the USB storage device
The USB storage device can be operated from the menu
displayed on the TV screen.
You can operate the contents of USB storage device
from the Now Playing view or the Browse view.
■ Operating from the Browse view
If you have connected the USB storage device to this
unit before, playback of the music file played at the last
time automatically starts.
VOLUME
k
POP-UP
MENU
MUTE
e
2
3
5
6
7
9
0
10
10 Pages Down
Goes to 10 pages forwards or backwards.
1 Page Down
REC
1
10 Pages Up
a b c
DISPLAY
TOP
MENU
To use these buttons, first press kCursor E. Then
select the desired one with kCursor B / C and
kENTER.
1 Page Up
OPTION
ENTER
Screen buttons on the Browse view
4
f
d
g
Scrolls the list to the next or previous page.
Now Playing
Switches the display to the Now Playing view.
8
ENT
h
INPUT
MUTE
d USB
k Cursor B / C / D / E
k ENTER
k RETURN
a
b
c
d
e
f
g
h
Repeat icon
Shuffle icon
Play icon
Current directory name
Menu items
Input icon
Screen button area
Buttons for available operations are displayed. See
“Screen buttons on the Browse view” for details.
Current menu number / Number of all menu items
1
2
3
4
Connect your USB storage device to the
USB port on the front panel (☞p. 36).
Rotate the INPUT selector (or press dUSB)
to select “USB” as the input source.
Press kCursor B / C / D / E to select a
music file to play back.
• To select a file or folder, press kCursor B / C.
• To confirm the selection, press kENTER.
• To return to the previous menu, press kRETURN.
Press kENTER to start playback.
The Now Playing view appears during playback.
En
65
PLAYBACK
MAIN
Playing back tunes on the USB storage devices
ZONE 2
CODE SET
■ Operating from the Now Playing
SOURCE RECEIVER
view
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
4
DOCK
HDMI OUT
PHONO
FM
AM
INFO
MEMORY
PRESET
TUNING
f
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
STRAIGHT PURE DIRECT
e
f
d
h
i
g
1
2
3
4
BD/DVD
TV
CD
RADIO
OPTION
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
1
2
3
5
6
7
9
0
10
INPUT
MUTE
f INFO
k Cursor B / C
k ENTER
lp
ls
la
lb
s (Stop)
Stops playback.
b (Skip -)
Skips to the beginning of the currently
playing song. Press kENTER at the
beginning of the song to skip to a previous
song.
a (Skip +)
Skips to the beginning of the next song.
a
b
k
c
d
e
f
l g
4
8
ENT
h
i
Repeat icon
Shuffle icon
Play icon
Album image
Artist name
Album title
Screen button area
Buttons for available operations are displayed. See
“Screen buttons on the Now Playing view” for details.
Song title
Elapsed time
Use the following remote control keys to operate
(playback, stop, skip, etc.) USB storage device.
lp
Play
ls
Stop
la
Skip forward during playback
lb
Skip backward during playback
■ Shuffle/repeat playback
Scroll
SCENE
ON SCREEN
with the remote control
Operates the basic playback functions of USB.
a b c
AUDIO
TUNER
■ Operating basic playback functions
Play Control
Switches the scroll target (artist name, album title, or
song title).
Use the Option menu to apply playback shuffle and
repeat settings. Refer to “Shuffle playback” (☞p. 58)
and “Repeat playback” (☞p. 58) for details.
Browse
Switches the display to the Browse view.
• You can switch the information displayed on the front
panel display by pressing fINFO (☞p. 11).
• Album images are available only when the file
contains image data.
Screen buttons on the Now Playing view
To use these buttons, first press kENTER. Then select
the desired one with kCursor B / C and kENTER.
En
66
PLAYBACK
MAIN
ZONE 2
Listening to the Internet Radio
CODE SET
SOURCE RECEIVER
You can listen to Internet Radio stations using the vTuner Internet Radio station database service particularly customized for this unit, providing a database of over 2000
radio stations. Also, you can store your favorite stations with bookmarks.
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
4
USB
NET
MULTI
DOCK
AUDIO
d
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
TUNING
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
OPTION
VOLUME
ENTER
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
k
• To use this feature, your network must be connected to
the Internet.
• A narrowband Internet connection (i.e. 56K modem,
ISDN) will not provide satisfactory results, and a
broadband connection is strongly recommended (i.e. a
cable modem, an xDSL modem, etc.). For detailed
information, consult with your ISP.
• If you do not use a DHCP server, configure the
network parameters (IP address, etc.) of this unit
manually (☞p. 99).
• Some security devices (such as firewall) may block the
access of this unit to Internet Radio stations. In such
cases, configure the security settings appropriately.
• This service may be discontinued without notice.
• Some Internet Radio stations may not be played.
REC
Listening to Internet Radio
1
2
3
5
6
7
9
0
10
■ Operating from the Browse view
a
b
c
d
INPUT
MUTE
d NET
k Cursor B / C / D / E
k ENTER
k RETURN
The Internet Radio can be operated from the menu
displayed on the TV screen.
You can operate the Internet Radio from the Now
Playing view or the Browse view.
e
1 Page Up
1 Page Down
f
a
b
c
d
e
8
For a complete list of status messages that appear on
the front panel display and GUI screen, see “USB and
Network” (☞p. 125).
10 Pages Down
Goes to 10 pages forwards or backwards.
4
ENT
10 Pages Up
f
Play icon
Current directory name
Menu items
Album art / Input icon
Screen button area
Buttons for available operations are displayed. See
“Screen buttons on the Browse view” for details.
Current menu number / Number of all menu items
Screen buttons on the Browse view
Scrolls the list to the next or previous page.
Now Playing
Switches the display to the Now Playing view.
1
2
To use these buttons, first press kCursor E. Then
select the desired one with kCursor B / C and
kENTER.
Bookmark On
3
Press dNET repeatedly to select “NET
RADIO” as the input source.
Press kCursor B / C to select an item to
play back.
• To select an item, press kCursor B / C.
• To confirm the selection, press kENTER.
• To return to the previous menu, press kRETURN.
Press kENTER to start playback.
The Now Playing view appears during playback.
The selected Internet Radio station is added to the
Bookmarks list in “NET RADIO.”
Bookmark Off
This item is displayed in the bookmark directory.
The selected Internet Radio station is removed from the
Bookmarks list.
En
67
PLAYBACK
MAIN
Listening to the Internet Radio
ZONE 2
CODE SET
■ Operating from the Now Playing
SOURCE RECEIVER
view
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
Switches the display to the Browse view.
a
AUDIO
■ Operating basic playback functions
4
with the remote control
DOCK
Use the following remote control keys to operate
(playback, stop) the Internet Radio.
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
PRESET
TUNING
f
e
b
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
4
BD/DVD
TV
CD
RADIO
Browse
lp
Play
ls
Stop
STRAIGHT PURE DIRECT
SCENE
ON SCREEN
OPTION
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
1
2
3
5
6
7
9
0
10
INPUT
MUTE
4
8
cd
a
k b
c
d
l e
Play icon
Album image
Elapsed time
Current station name
Screen button area
Buttons for available operations are displayed. See
“Screen buttons on the Now Playing view” for details.
You can switch the information displayed on the front
panel display by pressing fINFO (☞p. 11).
ENT
You can also register your favorite Internet Radio
stations on this unit by accessing the website with the
web browser on your PC. To use this feature, you
need the vTuner ID of this unit and your e-mail
address to create your personal account. For details,
refer to the help information on the website.
URL: http://yradio.vtuner.com/
NOTE
To clear the personal account such as vTuner ID or email address, perform “NETWORK” of
“INITIALIZE” in the Advanced Setup menu
(☞p. 112).
Screen buttons on the Now Playing view
To use these buttons, first press kENTER. Then select
the desired one with kCursor B / C and kENTER.
Bookmark On
f INFO
k Cursor B / C
k ENTER
ls
lp
The station currently being played back is added to the
Bookmarks list in “NET RADIO.”
Play Control
The following operation is available.
s (Stop)
Stops playback.
En
68
PLAYBACK
MAIN
ZONE 2
Using shortcut function
CODE SET
SOURCE RECEIVER
Use this feature to access the desired music sources
(WAV, MP3 and WMA files on the connected PC or
USB storage devices and Internet Radio Stations)
directly. You can preset up to 40 items for above input
sources.
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
AUDIO
4
DOCK
HDMI OUT
TUNER
FM
AM
MEMORY
PRESET
TUNING
e
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
4
TV
CD
RADIO
ON SCREEN
OPTION
DISPLAY
TOP
MENU
Select a desired content you want to assign
to a preset number, and then play back the
content.
2
Press eMEMORY.
This unit automatically selects an empty preset number
and the following display appears.
MemoryPreset
09:Empty
VOLUME
POP-UP
MENU
k
MUTE
REC
MemoryPreset
01:Empty
4
Press eMEMORY.
The following display appears on the front panel
display and the preset content is set.
VOLUME
Preset number (Blinks)
1
2
3
4
5
6
7
8
9
0
10
m
INPUT
MUTE
e MEMORY
e PRESET F / G
k RETURN
m Numeric keys
ENT
• To automatically assign the selected content to an
empty preset number, press and hold eMEMORY for
at least 2 seconds with step 2. In this case, the
following steps are unnecessary.
• To cancel the preset, press kRETURN.
• When you do not complete each of the following steps
within 30 seconds, the memory preset mode is
automatically canceled. In this case, start over from
step 2.
This unit stores the relative position of the preset items
in a directory or playlist, and does not recall the correct
item by using mNumeric keys if you add or delete
music files to or from the same directory or playlist as
the preset items. In such cases, preset the desired item to
the preset numbers again.
We recommend the following methods:
USB storage devices
Valid numbers as the preset number are “01” to “40.”
MemoryPreset
09:Memorized
Create several directories containing the desired content
in a directory beside the directory containing all music
files, and then assign the top item of each directory to a
preset number. To change the content assigned to preset
numbers, replace the content in the directory to new
content without deleting the directory.
PC server
VOLUME
ENTER
RETURN
1
STRAIGHT PURE DIRECT
SCENE
BD/DVD
■ Assigning the items to the preset number
PHONO
INFO
3
Press ePRESET F / G or mNumeric keys
to select the preset number that you want to
assign.
VOLUME
■ Selecting the item assigned to the preset
number
Create eight playlists containing the desired content, and
then assign the top item of each playlist to a preset
number. To change the content assigned to preset
numbers, replace the content registered with a playlist
with new content without deleting the playlist.
Press ePRESET F / G to select the preset
number to which the desired item is assigned to
select the item as the input source.
This unit starts the playback of the source assigned to the
selected numeric button.
NOTES
• “xx:Empty” appears on the front panel display when
you select the preset number to which no items are
assigned.
• This unit does not recall the correct item assigned to
the selected preset number in the following cases:
– the connected USB device is incorrect.
– the PC which stores the selected item is turned off
or disconnected from the network.
– the selected Internet Radio station is temporary
unavailable or out of service.
– the directory of the selected item has been changed.
En
69
PLAYBACK
MAIN
ZONE 2
Playing back tunes from your iPod™/iPhone™
CODE SET
SOURCE RECEIVER
Once you have connected a Universal Dock for iPod (such as the YDS-12, sold separately) to this unit, you can enjoy playback of your iPod/iPhone using the remote
control supplied with this unit. When playing back from an iPod/iPhone, you can also use the compressed music enhancer sound programs to give compressed audio
formats such as MP3 a sharper, more dynamic sound (☞p. 50). A Yamaha Wireless System for iPod (YID-W10, sold separately) can also be connected to this unit to play
back iPod/iPhone with wireless connection.
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
AUDIO
4
DOCK
d
• When playing back iPod/iPhone with wired
connection
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
Refer to “Connecting the Universal Dock for iPod.”
TUNING
f
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
Switch this unit on and place your iPod/iPhone in the
dock. The unit is now ready for playback.
iPodconnected
Refer to “Playing iPod™/iPhone™ with wireless
connection” (☞p. 72).
DOCK
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
2
3
5
6
7
9
0
10
INPUT
MUTE
d DOCK
f INFO
AV 3
AV 4
Connecting the Universal Dock for
iPod
PHONO
GND
MUTE
REC
1
AV 2
(1 BD/DVD)
OPTION
4
Use the dedicated cable to connect the dock to the
DOCK jack on the rear panel of this unit. Refer to the
operating instructions of the Universal Dock for iPod for
information on how to connect your iPod/iPhone.
Universal Dock
for iPod
After setting your iPod/iPhone in your dock, just press
dDOCK to switch to DOCK input to play your iPod/
iPhone.
The iPod/iPhone can be operated in the following two
ways.
NETWORK
AV 1
ON SCREEN
VOLUME
• When playing back iPod/iPhone with
wireless connection
Controlling an iPod™/iPhone™
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
ANTENNA
FM (4 RADIO) GND AM
75
Menu browse control:
Plays the iPod/iPhone while viewing the menu displayed
on the TV. Refer to “Playing iPod™/iPhone™ from the
menu screen (Menu browse control)” (☞p. 71).
Simple remote control:
Plays audio and video through this unit while viewing
the menu displayed on the iPod/iPhone screen. Refer to
“Operating basic playback functions via the remote
control (Simple remote control)” (☞p. 72).
8
ENT
• iPod touch, iPod (4th Gen/5th Gen/Classic), iPod
nano, iPod mini, iPhone, iPhone 3G, and iPhone 3GS
are supported (As of March 2010).
• When connecting iPhone, iPhone 3G and iPhone 3GS,
use a YDS-12.
• Some features may not be compatible depending on
the model or the software version of your iPod/iPhone.
• Some functions may not be available for some
Universal Dock for iPod models. This explanation
focuses on the YDS-12.
Locate the wireless dock at the distance as far as
from the unit.
When this unit is in standby mode, iPod/iPhone can be
charged automatically (☞p. 80).
• Song information (artist, album, song) is displayed on
the front panel. Press fINFO repeatedly to display
subsequent/previous information when displaying
Now Playing view in Menu browse control.
• The Yamaha logo is displayed on the iPod screen
when iPod stationed in the Universal Dock for iPod
(does not apply to the iPod touch or iPhone). However,
the Yamaha logo is not displayed in Simple remote
control.
• Manual control of the iPod/iPhone is not possible
while the iPod stationed in the Universal Dock for
iPod and Menu browse control is displayed.
CAUTION
To prevent accidents, switch this unit to standby mode
before connecting the Universal Dock for iPod.
En
70
PLAYBACK
MAIN
Playing back tunes from your iPod™/iPhone™
ZONE 2
CODE SET
Playing iPod™/iPhone™ from the
menu screen (Menu browse
control)
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
4
USB
NET
MULTI
DOCK
Screen buttons on the Browse view
To use these buttons, first press kCursor E. Then
select the desired one with kCursor B / C and
kENTER.
AUDIO
d
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
TUNING
The iPod/iPhone can be operated from the menu
displayed on the TV screen.
You can operate the iPod/iPhone from the Now Playing
view or the Browse view.
a b c
2
3
4
TV
CD
RADIO
ON SCREEN
VOLUME
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
■ Operating from the Now Playing
10 Pages Down
a b c
Goes to 10 pages forwards or backwards.
1 Page Down
OPTION
ENTER
The Now Playing view appears during playback. J2
view
1 Page Up
STRAIGHT PURE DIRECT
SCENE
1
Press kCursor B / C to select iPod/iPhone
menu items, and press kENTER to play.
■ Operating from the Browse view
ENHANCER SUR. DECODE
BD/DVD
10 Pages Up
3
k
e
f
d
g
Scrolls the list to the next or previous page.
e
f
d
h
k
g
i
j
Now Playing
MUTE
Switches the display to the Now Playing view.
REC
h
1
2
3
4
5
6
7
8
9
0
10
ENT
INPUT
MUTE
d DOCK
k Cursor B / C / D / E
k ENTER
Close
a
b
c
d
e
f
g
h
Repeat icon
Shuffle icon
Play icon
Current directory name
Menu items
Input icon
Screen button area
Buttons for available operations are displayed. See
“Screen buttons on the Browse view” for details.
Current menu number / Number of all menu items
Returns to the video playback, turning off the menu
display.
1
2
a
b
c
d
e
f
g
Press dDOCK to switch to the DOCK input.
Press kCursor B / C to select the content
(music or video) that you want to play, and
press kENTER. J1
h
i
j
k
Repeat icon
Shuffle icon
Play icon
Album image
Artist name
Album title
Screen button area
Buttons for available operations are displayed. See
“Screen buttons on the Now Playing view” for details.
Song title
Remaining time
Progress bar
Elapsed time
J 1 : Videos will not be displayed when your iPod or Universal Dock
for iPod do not support the browser function for browsing video
files.
J 2 : When selecting the video content, the following display is not
displayed.
En
71
PLAYBACK
MAIN
Playing back tunes from your iPod™/iPhone™
ZONE 2
CODE SET
Screen buttons on the Now Playing view
SOURCE RECEIVER
To use these buttons, first press kENTER. Then select
the desired one with kCursor B / C and kENTER.
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
Play Control
AUDIO
4
DOCK
d Operates the basic playback functions of iPod/iPhone.
HDMI OUT
TUNER
Operating basic playback functions
via the remote control (Simple
remote control)
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
4
BD/DVD
TV
CD
RADIO
PRESET
TUNING
p (Play)
Starts playback.
s (Stop)
Stops playback.
e (Pause)
Stops playback temporarily.
b (Skip -)
Skips to the beginning of the currently
playing song. Press kENTER at the
beginning of the song to skip to a
previous song.
Use the following remote control keys to operate
(playback, stop, skip, etc.) your iPod/iPhone.
Press lREC to enable the Simple remote control.
Press lREC again to return to the Menu browse
control.
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
SCENE
ON SCREEN
a (Skip +)
OPTION
VOLUME
ENTER
k w (Scan -)
f (Scan +)
DISPLAY
TOP
MENU
POP-UP
MENU
Switches to the DOCK (iPod) input.
kCursor B / C
Move the cursor up and down to different
fields.
Skips to the beginning of the next song.
kRETURN
Returns to the previous menu.
Searches backwards.
kENTER
Confirms the selected menu.
Searches forwards.
lw
Searches backwards while held down.
lf
Searches forwards while held down.
lb
Skips to the beginning of the currently
playing song. Pressing repeatedly skips
one song backwards with each press.
la
Skips to the beginning of the next song.
ls
Stops playback.
le
Switches between playback and pause.
lp
Switches between playback and pause.
lREC
Switches the control method between the
Menu browse control and Simple remote
control.
MUTE
REC
l
1
2
3
4
5
6
7
8
9
0
10
INPUT
dDOCK
ENT
Scroll
Switches the scroll target (artist name, album title, or
song title).
Browse
Switches the display to the Browse view.
MUTE
Close
d DOCK
k Cursor B / C
k ENTER
k RETURN
l REC
ls
le
lp
lw
lf
lb
la
Returns to the video playback, turning off the menu
display.
Playing iPod™/iPhone™ with
wireless connection
A Wireless System for iPod (YID-W10, sold separately)
can be connected to this unit to play back iPod/iPhone
with wireless connection. The iPod/iPhone can be used
as the remote control. J1
■ Connecting the Wireless System
for iPod and playing back iPod/
iPhone
Use the dedicated cable to connect the receiver of the
Wireless System for iPod to the DOCK jack on the rear
panel of this unit. Refer to the operating instructions of
the YID-W10 for more information.
CAUTION
To prevent accidents, unplug the power cable of this
unit before connecting the receiver of the Wireless
System for iPod.
Continues to the
next page
J 1 : Video signals cannot be transmitted wirelessly.
En
72
PLAYBACK
MAIN
Playing back tunes from your iPod™/iPhone™
ZONE 2
CODE SET
Use iPod/iPhone to start playback.
Place the iPod/iPhone in the wireless transmitter. Setup
is complete.
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
AUDIO
iPodconnected
• When “iPod Interlock” → “Volume” in the Input menu
is set to “Off,” the volume of this unit is not adjusted
when iPod/iPhone volume controls are adjusted
(☞p. 80).
• This unit may restrict the volume level to prevent
excessively loud play back. In such a case, gradually
increase the volume level.
VOLUME
4
DOCK
d
HDMI OUT
TUNER
PHONO
DOCK
FM
INFO
NETWORK
AM
PRESET
TUNING
MEMORY
AV 1
MUSIC
SLEEP
PARTY
AV 3
AV
(1 BD/DVD)
ENHANCER SUR. DECODE
MOVIE
AV 2
PHONO
GND
STRAIGHT PURE DIRECT
CAUTION
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
Receiver of the Wireless
System for iPod
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OP
OPTION
ANTENNA
VOLUME
ENTER
FM (4 RADIO) GND AM
75
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
12
MUTE
A
3
B
REC
1
2
3
5
6
7
9
0
10
INPUT
MUTE
• Adjusting volume control on the iPod/iPhone also adjusts
the volume (max 0.0 dB) of this unit.
4
Position the receiver as far as possible
from the unit.
8
ENT
When this unit is in standby mode, iPod/iPhone can be
charged automatically, if “Standby Charge” is set to
“Auto” (☞p. 80) or “Power & Input” of “iPod Interlock”
is set to “On” (☞p. 80).
d DOCK
• This unit, which is placed in the main zone, functions as
follows when iPod/iPhone controls are used to start
playback.
– The input source switches to DOCK (iPod) when this
unit is turned on.
– When this unit is in standby mode when iPod/iPhone
playback starts, this unit turns on and the input source
switches to DOCK (iPod). J1
• This unit automatically enters standby mode when the
following operations are performed.
– iPod/iPhone is removed from the YID-W10
– iPod/iPhone is not operated for a while after playback
is stopped
When iPod/iPhone controls are used to adjust volume,
playback volume may be unexpectedly loud. This
could result in damage to this unit or the speakers. If
the volume suddenly increases during playback,
immediately remove the iPod/iPhone from the
Wireless System for iPod. “Max Volume” can be used
to specify the maximum volume level to prevent
excessively loud playback (☞p. 95).
• Pressing dDOCK also switches the input source to
DOCK (iPod).
• When a menu is operated, this function is not
activated.
• When “iPod Interlock” → “Power & Input” in the
Input menu is set to “Off,” the power and the input
source do not switch automatically (☞p. 80).
J 1 : This function is also activated when sound of application is
reproduced or ringtone is received.
En
73
PLAYBACK
MAIN
ZONE 2
Playing back tunes from Bluetooth™ components
CODE SET
SOURCE RECEIVER
You can connect a Yamaha Bluetooth Wireless Audio Receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible
portable music players. J1
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
4
USB
NET
MULTI
DOCK
AUDIO
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
PRESET
TUNING
e
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
Connecting a Yamaha Bluetooth
Wireless Audio Receiver
Pairing Bluetooth™ components
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
NOTE
d When playing back from a Bluetooth component for the first time, you must first pair the devices (register the Bluetooth components). When establishing a wireless connection
you must carry out pairing on both this unit and on the Bluetooth component.
OPTION
VOLUME
ENTER
Use the dedicated cable to connect the dock to the
t DOCK jack on the rear panel of this unit.
The Bluetooth Wireless Audio Receiver connection will
be complete when this unit is turned on.
k
DISPLAY
DOCK
TOP
MENU
POP-UP
MENU
NETWORK
MUTE
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
REC
PHONO
Be sure to carry out pairing when connecting a Bluetooth
component for the first time, or when settings have been deleted.
Refer to the operating instructions of your Bluetooth
component as necessary when carrying out pairing.
The Yamaha Bluetooth Wireless Audio Receiver can
be paired with up to eight Bluetooth components.
When the ninth device is paired, the pairing settings
for the device which has not been used for the longest
period of time will be deleted.
GND
1
2
3
5
6
7
9
0
10
8
ENT
Yamaha Bluetooth
Wireless Audio Receiver
Ԙ COAXIAL
ԙ COAXIAL
Ԛ OPTICAL
ԛ OPTICAL
ANTENNA
FM (4 RADIO) GND AM
MUTE
75
1
2
3
Press tOPTION to display the Option menu
and use kCursor B / C to select “Pairing.”
CAUTION
To prevent accidents, switch this unit to standby mode
before connecting a Bluetooth Wireless Audio Receiver.
Option
Pairing
Searching...
VOLUME
• To cancel pairing, press kRETURN.
• You can also press and hold eMEMORY on the front
panel to begin pairing.
5
Press dDOCK to switch to the DOCK input.
Turn on the Bluetooth component you want
to pair with and set it to pairing mode.
Press kENTER to start pairing.
4
INPUT
d DOCK
e MEMORY
k Cursor B / C
k ENTER
k RETURN
t OPTION
4
Make sure the Bluetooth component
recognizes the Bluetooth Wireless Audio
Receiver.
When the device is recognized, it will appear in the
Bluetooth component list, for example as “YBA-10
YAMAHA.”
6
Select the Bluetooth Wireless Audio
Receiver from the Bluetooth component
list, and enter a pass key “0000” into the
Bluetooth component. J2
When pairing occurs correctly
VOLUME
Completed
VOLUME
J 1 : This unit supports A2DP (Advanced Audio Distribution Profile)
of the Bluetooth profile.
J 2 : Depending on Bluetooth components, wireless connection is
carried out right after the pairing. In this case, “BT connected” is
displayed instead of “Completed.”
En
74
PLAYBACK
MAIN
Playing back tunes from Bluetooth™ components
ZONE 2
CODE SET
Using Bluetooth™ components
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
AUDIO
4
DOCK
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
When pairing is complete, perform the following
procedure to achieve a wireless connection between this
unit and the Bluetooth component. When the wireless
d connection is complete, Bluetooth components can be
played back.
Depending on Bluetooth components, a wireless
connection is established automatically or by
operating the Bluetooth components. In that case, it is
not necessary to carry out the following procedure.
TUNING
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
t
OPTION
VOLUME
ENTER
RETURN
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
k
1
2
Press dDOCK to switch to the DOCK input.
Press tOPTION to display the Option
menu.
REC
1
2
3
5
6
7
9
0
10
4
8
ENT
3
Use kCursor B / C to select “Connect” and
press kENTER. J1
When wireless connection is complete
BTconnected
VOLUME
“Not found” is displayed when there is an error
connecting. Check that the following conditions have
been satisfied, and try to establish a wireless
connection again.
• Both this unit and the Bluetooth component are paired.
• The Bluetooth component is switched on.
• The Bluetooth component is within 10 m of the
Bluetooth Wireless Audio Receiver.
4
5
Press tOPTION to exit the Option menu.
Operate the Bluetooth component for
playback.
To disconnect a wireless connection, repeat the same
steps, and in step 3, select “Disconnect.”
INPUT
MUTE
d DOCK
k Cursor B / C
k ENTER
t OPTION
J 1 : “Disconnect” is displayed when a Bluetooth component has been
connected.
En
75
PLAYBACK
Controlling this unit by using the Web browser (Web Control Center)
Displaying and Operating Web Control
Center
You can operate this unit by using a web browser. You can select
the input source and sound field program, browse the iPod or
network/USB contents, select the preset items, and adjust the
parameters of this unit by using the graphical user interface (Web
Control Center) that appears in the web browser. Check the IP
address of this unit by using “IP Address” in “Network” menu
(☞p. 99) in advance, and then enter the IP address to the web
browser to access this unit to control it.
NOTE
When “Network Standby” is set to “On” in the Network menu,
this unit can turns on and Web Control Center can be displayed
on the PC even if this unit was in standby mode (☞p. 99). When
“Network Standby” is set to “Off,” we recommend that
“Network Standby” is set to “On” to use Web Control Center.
PC
Web browser
Control
•
•
•
•
•
• To use this feature, this unit and your PC must be connected
properly in the network. Refer to “Connecting to the network” for
details on the connections (☞p. 35).
• We recommend that you use Windows Internet Explorer 8 that is
installed on Windows XP or Windows 7 PC to access this unit.
• You can select whether this unit accepts the controls by using the
web browser when this unit is in the standby mode.
• You can register the MAC address of the PCs you want to use to
control this unit and limit the PCs that can control this unit by
using the web browser. You can select that this unit allows the
access to this unit by the PCs whose MAC addresses are
registered to this unit or allows the access by any PCs by using
“MAC Address Filter” in the “Network” setup (☞p. 99).
Top menu
d
a
e
f
b
g
c
a CONTROL
Changes the display to the zone control menu (☞p. 77).
b SETTINGS
Changes the display to the settings menu (☞p. 77).
c PARTY MODE
Features of Web Control Center for each zone
Enables/disables the party mode (☞p. 100).
Feature
Main Zone
Zone2
Power on/off
✓
✓
Sleep timer
✓
✓
Input select
✓
✓
Volume adjustment
✓
✓
Mute on/off
✓
✓
Content/channel select
✓
✓
Sound program
✓
—
Party Mode on/off
✓
✓
Required settings for web browse
control
✓
✓
d SYSTEM POWER
Turns on/off the power for all zones.
e STATUS
f
g
Turns on/off the power for each zone, and displays the selected input
source and volume level for each zone.
MAIN VOLUME
Adjusts the volume level or mutes the sound for the main zone. You
can also switch the step for the volume control.
RELOAD
Reloads the current status of the receiver.
Selecting the input source
Controlling Network/USB features
Power on/off
Adjusting the system parameters
Any many other features...
En
76
PLAYBACK
Controlling this unit by using the Web browser (Web Control Center)
Zone control menu
You can control the selected zone.
Settings menu
You can make various settings regarding the web browse control.
c
a
a
d
b
c
d
e
f
e
b
f
g
h
a PLAY INFO
Controls the selected input for each zone.
a Zone Rename
b TOP MENU
c
d
e
f
Returns to the top menu.
SCENE keys
Selects the scene.
POWER
Turns on/off the power for the selected zone. You can also set the
sleep timer for the selected zone.
VOLUME
Adjusts the volume level or mutes the sound for the main zone. You
can also switch the step for the volume control.
RELOAD
Reloads the current status of the receiver.
b
c
d
e
f
g
h
Friendly Name indicates the identification name of the device (this
unit) connected to the PC.
Friendly Name or the names of zones can be changed.
MAC Filter
Applies the MAC address filter to this unit. Web Control Center can
only be accessed from a computer with the same address as the MAC
address registered here.
Auto Reload
Enables or disables the Auto Reload function which reloads the
current status of the receiver every 5 minutes.
Tips 1/Tips 2
Displays the tips for use of Web Control Center.
Create Link
Customizes the display of Web Control Center.
iPhone J1
Selects the zoom rate for iPhone.
BACK
Returns to the top menu.
RELOAD
Reloads the current status of the receiver.
J 1 : This item appears only when accessing the Web Control Center with the
iPhone.
En
77
SETUP
MAIN
ZONE 2
CODE SET
Configuring input sources (Input menu)
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
4
USB
NET
MULTI
DOCK
Settings, such as the name of an input source or the icon displayed for an input source can be changed from the Input menu.
Configuring input sources
AUDIO
HDMI OUT
TUNER
FM
The name of an input source and its icon, as well as other
input source settings, can be changed from the Input
menu displayed on the TV screen.
PHONO
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
TUNING
ENHANCER SUR. DECODE
1
STRAIGHT PURE DIRECT
3
Use kCursor D / E to select an input source
to be configured and press kCursor B.
1
2
3
4
TV
CD
RADIO
ON SCREEN
Use kCursor B / C to adjust the setting.
Pressing kRETURN displays the previous menu
screen. Repeat steps 4 to 5 to adjust multiple settings.
Press jON SCREEN.
6
SCENE
BD/DVD
5
j
Press jON SCREEN to close the menu.
OPTION
VOLUME
ENTER
k
4
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
Use kCursor B / C to select an item and
press kENTER.
Settings
REC
1
2
3
4
5
6
7
8
9
0
10
2
Use kCursor B / C to select “Input” and
press kENTER.
ENT
INPUT
MUTE
j ON SCREEN
k Cursor B / C / D / E
k ENTER
k RETURN
If the selected item contains additional items, use
kCursor B / C to select the desired item and press
kENTER.
En
78
SETUP
MAIN
Configuring input sources (Input menu)
ZONE 2
CODE SET
Input menu
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
✓:
AUDIO
AV1-7
V-AUX
AUDIO1-4
PHONO
MULTI CH
USB
Rename/Icon Select
✓
✓
✓
✓
✓
✓
Decoder Mode
✓
✓
✓
Enhancer
✓
✓
✓
4
DOCK
PC
NET RADIO
available menu for each input source
DOCK (iPod)
DOCK (Bluetooth)
✓
✓
✓
✓
TUNER
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
TUNING
✓
✓
✓
✓
✓
✓
DMC Control
ENHANCER SUR. DECODE
SCENE
2
3
4
BD/DVD
TV
CD
RADIO
VOLUME
RETURN
k
■ Changing an input source name or
icon
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
ENT
INPUT
✓
Video Out
OPTION
ENTER
✓ J1
iPod Interlock
1
ON SCREEN
✓
Standby Charge
STRAIGHT PURE DIRECT
Rename/Icon Select
Changes the input source name (up to nine characters)
and icon displayed on the front panel display or TV
screen.
1
Use kCursor B / C repeatedly to select
“Rename/Icon Select” and press kENTER.
MUTE
k Cursor B / C / D / E
k ENTER
2
3
Use kCursor D / E to choose an icon.
4
Press kCursor B / C to select a character,
and press kCursor D / E to enter the
selected character.
5
6
Repeat step 4 to enter the desired input
source name.
Press kCursor C and kENTER.
Editing the name is available.
7
Press kCursor C to select “OK” and press
kENTER to register the new input name.
• To cancel the operation without applying changes,
select “CANCEL” and then press kENTER.
• To clear the characters entered in step 5, select
“CLEAR” and press kENTER.
Confirm the input source name by pressing
kENTER.
J 1 : Not available when playing back iPod/iPhone with wired
connection.
En
79
SETUP
Configuring input sources (Input menu)
■ Setting the format of digital audio signals
■ Using a PC to control this unit over a
network
Decoder Mode
Sets the format of digital audio to playback to DTS. For example, if
the format is not automatically detected correctly even during
playback of DTS format audio, this item can be used to set the
playback format to DTS.
Auto (Default)
DTS
The audio format is automatically selected to match
the format of the input audio.
Selects DTS signals only. Other input signals are not
reproduced.
■ Selecting the sound program suitable for
listening to compressed audio, such as
MP3
Enhancer
Turns on/off the Compressed Music Enhancer.
Turns off the Compressed Music Enhancer.
On
Turns on the Compressed Music Enhancer.
iPhone (the receiver of the Wireless
System for iPod is connected)
DMC Control
This unit can be operated via the DLNA compatible controller
(e.g., Windows Media Player, etc.) to the same network of this unit.
DMC stands for “Digital Media Controller.”
Disable
Disables the DMC control function.
Enable (Default)
Enables the DMC control function.
iPod Interlock
This unit can be automatically operated in conjunction with
operations on iPod when the receiver of the Wireless System for
iPod is connected to this unit.
Power & Input
Starting playback of iPod/iPhone turns on this unit
and switches the input source to DOCK (iPod)
automatically when this item is set to “On.” This unit
automatically enters standby mode when iPod/iPhone
is not operated for a while after playback is stopped.
This interlock function is disable with “Off.”
Volume
Adjusting the volume on the iPod/iPhone also adjusts
the volume of this unit when this item is set to “On.”
This interlock function is disable with “Off.”
■ Charging an iPod™/iPhone™ in standby
mode
Standby Charge
Charges an iPod/iPhone stationed in the Universal Dock for iPod or
the receiver of the Wireless System for iPod while this unit is in
standby mode.
Auto (Default)
Off
■ Setting the interlock functions with iPod/
Off
This unit charges iPod/iPhone when this unit is in
standby mode. While charging an iPod/iPhone, the
HDMI Through/iPod Charge indicator lights.
After the charging is complete, standby charge
function is automatically off and the HDMI Through/
iPod Charge indicator goes off. J1
This unit does not charge iPod/iPhone.
■ Outputting a video signal input from
another input source while playing a
multi-channel audio signal
Video Out
When “MULTI CH” is selected as the input source, a video signal
input from another terminal can be output to the video monitor. For
example, even if an audio and video component such as a DVD
player that does not support a multi-channel digital audio output,
the video signal can be output to the video monitor while
reproducing a multi-channel analog audio signal.
J 1 : Standby charge function automatically turns off only when using YDS-10/11/
12.
En
80
SETUP
MAIN
ZONE 2
Editing the SCENE function (Scene menu)
CODE SET
SOURCE RECEIVER
The SCENE function (☞p. 47) can be edited from the Scene menu displayed on the TV screen.
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
Editing a scene
AUDIO
4
Various settings, such as the name of a scene or the icon
displayed for a scene, can be changed from the Scene
menu.
DOCK
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
3
Use kCursor D / E to select a scene to be
edited and press kCursor B.
1
STRAIGHT PURE DIRECT
Press jON SCREEN.
6
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
j
OPTION
VOLUME
ENTER
4
k
DISPLAY
TOP
MENU
POP-UP
MENU
Use kCursor B / C / D / E to adjust the
setting.
Pressing kRETURN displays the previous menu
screen. Repeat steps 4 and 5 to adjust multiple
settings.
TUNING
ENHANCER SUR. DECODE
5
Press jON SCREEN to close the menu.
Use kCursor B / C to select an item and
press kENTER.
Settings
MUTE
REC
1
2
3
5
6
7
9
0
10
4
2
Use kCursor B / C to select “Scene” and
press kENTER.
8
ENT
INPUT
MUTE
j ON SCREEN
k Cursor B / C / D / E
k ENTER
k RETURN
If the selected item contains additional items, use
kCursor B / C to select the desired item and press
kENTER.
En
81
SETUP
Editing the SCENE function (Scene menu)
Scene menu
■ Registering SCENE function settings
Save
SCENE1
Save
Load
Rename/Icon Select
Reset
SCENE3
Save
Load
Rename/Icon Select
Reset
SCENE4
Save
Load
Rename/Icon Select
Reset
Input
✓
Displays the “Input” and “Audio Select” settings
registered with the SCENE function.
■ Adjusting settings registered with the
HDMI Output
✓
Displays the HDMI output jack(s) registered with the
SCENE function.
Mode
✓
Displays the sound program registered with the
SCENE function.
✓
Displays the “Tone Control,” “Adaptive DRC,” and
“Enhancer” settings registered with the SCENE
function.
SCENE function
Load
Loads input sources or sound programs that have been registered
with the SCENE function, or specifies whether or not an external
component registered as the input source is automatically turned on
when a scene is selected.
OK
Loads items indicated with a check mark in
“DETAIL.”
CANCEL
Cancels settings applied with “DETAIL.”
DETAIL
Specifies “SCENE IR” function and displays settings
registered with the SCENE function in detail.
For more information, see “SCENE IR” and “Detail”
at right.
SCENE IR
SCENE12
Save
Load
Rename/Icon Select
Reset
Scene 5 to 12 can also be edited in the Scene menu. Select Scene
5 to 12 in the Scene menu.
Display details of settings registered with the SCENE function.
Items indicated with a check mark in “Setting” are loaded.
Registers the settings currently applied to this unit for each
SCENE.
SCENE2
Save
Load
Rename/Icon Select
Reset
Detail
Sound
Surround
Displays the “CINEMA DSP 3D Mode,” “Dialogue
Lift,” and “Extended Surround” settings registered
with the SCENE function.
Video
Displays the “Video Processing” registered with the
SCENE function.
Volume
Displays the volume setting registered with the
SCENE function.
Lipsync
Displays the “Lipsync” and “Delay” settings
registered with the SCENE function.
Speaker Setup
Displays the “Setting Pattern” and “PEQ Select”
settings registered with the SCENE function.
Specify whether or not a Yamaha BD/DVD player or CD player
connected to this unit turns on automatically.
Off
Disables the SCENE IR function.
Yamaha BD/DVD
Player1
Select this when a Yamaha BD/DVD player is
connected to this unit.
Yamaha BD/DVD
Player2
Select this if the player dose not turn on when
“Yamaha BD/DVD Player1” is selected.
Yamaha CD Player
Select this when a Yamaha CD player is connected to
this unit.
En
82
SETUP
MAIN
Editing the SCENE function (Scene menu)
ZONE 2
CODE SET
■ Changing a scene name and icon
SOURCE RECEIVER
AV
1
2
3
4
7
V-AUX
5
6
1
2
3
USB
NET
MULTI
AUDIO
4
Rename/Icon Select
Changes the scene name and icon displayed on the front
d panel display or TV screen.
FM
1
2
PHONO
AM
PRESET
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
TUNING
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
Use kCursor B / C repeatedly to select
“Rename/Icon Select” and press kENTER.
Use kCursor D / E to choose an icon.
1
2
3
4
BD/DVD
TV
CD
RADIO
i
Reset
OPTION
VOLUME
ENTER
RETURN
Restores all settings for the selected scene to their
default values.
k
DISPLAY
TOP
MENU
POP-UP
MENU
• To cancel the operation without applying changes,
select “CANCEL” and then press kENTER.
• To clear the characters entered in step 4, select
“CLEAR” and press kENTER.
■ Resetting a scene
SCENE
ON SCREEN
Press kCursor C to select “OK” and press
kENTER to register the new input name.
DOCK
HDMI OUT
TUNER
6
7
Confirm the scene name by pressing
kENTER.
Simple registering as the SCENE
1
2
Use dInput selector to select the input
source you want to register.
Set the settings such as sound program,
Compressed Music Enhancer, or HDMI OUT
you want to register.
The following settings can be registered with a
scene J1:
Input, Audio Select, HDMI Output, Sound Program,
Pure Direct Mode, Tone Control, Adaptive DRC,
Compressed Music Enhancer, CINEMA DSP 3D
Mode, Dialogue Lift, Extended Surround, Video
Processing, Master Volume, Lipsync, Setting Pattern,
PEQ Select
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
ENT
INPUT
3
Press kCursor C and kENTER.
4
Press kCursor B / C to select a character,
and press kCursor D / E to enter the
selected character.
Editing the name is available.
3
Press the iSCENE key until “SET
Complete” appears on the front panel
display.
MUTE
SCENE4
SET Complete
VOLUME
Release the key when “SET Complete” is displayed
Scene names may consist of up to 20 characters.
d Input selector
i SCENE
k Cursor B / C / D / E
k ENTER
5
Repeat step 4 to enter the desired scene
name.
When changing “SCENE,” also change the external
component that the remote control operates
(☞p. 107).
J 1 : The settings with unchecked boxes in “Load” of the Scene menu
are not assigned to this unit even when pressing the correspond
scene key.
En
83
SETUP
MAIN
ZONE 2
Setting sound program parameters (Sound Program menu)
CODE SET
SOURCE RECEIVER
Sound effects can be adjusted from the Sound Program menu.
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
Editing sound programs
AUDIO
4
Adjust sound field elements (sound program parameters)
to achieve sound effects suited to the acoustics of audio/
video sources or rooms if you are not satisfied with the
results achieved with default sound program settings.
Follow the procedure described below to adjust sound
program parameters.
DOCK
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
TUNING
ENHANCER SUR. DECODE
1
2
3
4
BD/DVD
TV
CD
RADIO
j
OPTION
VOLUME
ENTER
DISPLAY
TOP
MENU
Use kCursor D / E to select a sound
program and press kCursor B.
Sound programs
5
Use kCursor B / C / D / E to adjust the
parameter and press kRETURN. J1
When there are multiple parameters in the selected
sound program, repeat steps 4 and 5 to adjust other
parameters.
STRAIGHT PURE DIRECT
SCENE
ON SCREEN
3
POP-UP
MENU
k
1
2
6
Press jON SCREEN.
■ To initialize sound program parameters
Press kCursor B / C to select “Sound
Program” and press kENTER.
4
MUTE
Press jON SCREEN to close the Sound
Program menu.
Use kCursor B / C to select a parameter
and press kENTER.
REC
To set the parameters of the sound program back to
their default settings, use kCursor B / C repeatedly
to select “Reset” in step 4 and press kENTER.
When the following message is displayed, select
“OK” and press kENTER to initialize.
Sound program parameters
1
2
3
5
6
7
9
0
10
4
8
ENT
INPUT
MUTE
Settings
j ON SCREEN
k Cursor B / C / D / E
k ENTER
k RETURN
To cancel initializing, select “CANCEL” and press
kENTER when the message above is displayed.
J 1 : An asterisk (*) appears on the left of the sound field parameter
name displayed on the TV when you change the parameter from
its default setting.
En
84
SETUP
Setting sound program parameters (Sound Program menu)
-6 dB to +3 dB
Default setting
0 dB
Adjust “DSP Level” as follows:
Surround Room Size
Surround Back Initial Delay
Surround Back Room Size
Initial delay. Presence, surround, and surround back sound field
initial delay. Changes the apparent size of the sound field by
adjusting the delay between the direct sound and the first reflection
heard by the listener. The smaller the value, the smaller the sound
field seems to the listener.
Adjustable range
1 to 99 ms (Initial Delay)
1 to 49 ms (Surround Initial Delay and Surround Back
Initial Delay)
• The effect sound is too soft.
• There are no differences between effects of the sound programs.
→ Increase the effect level.
• The sound is dull.
• The sound field effect is added too much.
→ Reduce the effect level.
Room size. Presence, surround, and surround back room size.
Adjusts the apparent size of the sound field. The larger the value,
the larger the surround sound field becomes. As the sound is
repeatedly reflected around a room, the larger the hall is, the longer
the time between the original reflected sound and the subsequent
reflections. By controlling the time between the reflected sounds,
you can change the apparent size of the virtual venue. Changing
this parameter from one to two doubles the apparent length of the
room.
Adjustable range
Source sound
0.1 to 2.0
Level
Level
Early
reflections
Time
Delay
Source sound
Time
Time
Delay
Delay
Audio source
Time
Time
Time
Audio source
Reflection face
Small value = 1 ms
Early
reflections
Level
Adjustable range
Surround Initial Delay
Level
Change the effect level (level of the sound field effect to be added).
You can adjust the level of the sound field effect while checking the
sound effect.
Room Size
Level
DSP Level
Initial Delay
Level
CINEMA DSP parameters
Large value = 99 ms
When you adjust the initial delay parameters, we also
recommend that you adjust the corresponding room size
parameters likewise.
Small value = 0.1
Large value = 2.0
When you adjust the room size parameters, we also recommend
that you adjust the corresponding initial delay parameters
likewise.
En
85
SETUP
Setting sound program parameters (Sound Program menu)
Reverb Time
Surround Liveness
Surround Back Liveness
Liveness. Surround and surround back liveness. Adjusts the
reflectivity of the virtual walls in the hall by changing the rate at
which the early reflections decay. The early reflections of an audio
source decay much faster in a room with acoustically absorbent
wall surfaces than in one which has highly reflective surfaces. A
room with acoustically absorbent surfaces is referred to as “dead,”
while a room with highly reflective surfaces is referred to as “live.”
This parameter lets you adjust the early reflection decay rate and
thus the “liveness” of the room.
Reverb Delay
Reverberation time. Adjusts the amount of time taken for the
dense, subsequent reverberation sound to decay by 60 dB at 1 kHz.
This changes the apparent size of the acoustic environment over an
extremely wide range. Set a longer reverberation time to get more
sustaining reverberation sound, and set a shorter time to get
articulate sound.
Adjustable range
Adjustable range
Reverberation
Source sound
60 dB
Source sound
(dB)
60 dB
60 dB
Reverberation
Short
reverberation
Source sound
Reverberation
Early reflections
Rev. Time
0 to 10
0 to 250 ms
1.0 to 5.0 s
Time
Adjustable range
Reverberation delay. Adjusts the time difference between the
beginning of the direct sound and the beginning of the
reverberation sound. The larger the value, the later the
reverberation sound begins. A later reverberation sound makes you
feel as if you are in a larger acoustic environment.
Level
Liveness
Time
Rev. Time
Time
Time
Rev. Time
Long
reverberation
Rev. Delay
Audio source
Time
Small reflected
sound
Small value = 0
Level
Dead
Level
Level
Live
Time
Small value = 1.0 s
Large value = 5.0 s
Time
Large reflected
sound
Large value = 10
En
86
SETUP
Setting sound program parameters (Sound Program menu)
Reverb Level
Reverberation level. Adjusts the volume of the reverberation
sound. The larger the value, the stronger the reverberation
becomes.
Level
Adjustable range
Parameters usable in certain sound
programs
2ch Stereo only
Direct
0 to 100%
Automatically bypasses the DSP circuit and tone control circuit
depending on the condition of tone control etc., when an analog
audio source is played back. You can enjoy a higher quality sound.
Source sound
Auto (Default)
Rev. Level
Off
Outputs sound by bypassing the DSP circuit and tone
control circuit when both tone controls of “Bass” and
“Treble” are set to 0 dB.
Surround R Level
Adjusts the volume of the surround R channel. J2
Adjustable range
0 to 100%
Default setting
100%
Surround Back L Level
Adjusts the volume of the surround back L channel. J2
Adjustable range
0 to 100%
Default setting
35% (7.1-channel configuration)
50% (6.1-channel configuration)
Does not bypass the DSP circuit and tone control
circuit.
Time
Surround Back R Level
7ch Stereo only
Decode Type
Adjusts the volume of the surround back R channel. J2
Selects a surround decoder to be used with a sound program in the
MOVIE category. J1
PLIIx Movie
PLII Movie
Selects the Dolby Pro Logic IIx Movie (or
Dolby Pro Logic II Movie) decoder.
Neo:6 Cinema
Selects the Neo:6 (Cinema) decoder.
Center Level
Adjusts the center channel volume. J2
Adjustable range
0 to 100%
Default setting
100%
Adjustable range
0 to 100%
Default setting
35% (7.1-channel configuration)
50% (6.1-channel configuration)
Front Presence L Level
Surround L Level
Adjusts the volume of the front presence L channel. J2
Adjusts the volume of the surround L channel. J2
J 1 : Surround decoders cannot be changed when used with the following MOVIE
Adjustable range
0 to 100%
Default setting
100%
Adjustable range
0 to 100%
Default setting
33%
J 2 : Not displayed when speakers are set to be inactive.
and ENTERTAINMENT sound programs.
• Mono Movie
• Sports
• Action Game
• Roleplaying Game
En
87
SETUP
Setting sound program parameters (Sound Program menu)
Front Presence R Level
Parameters usable in surround decoder
Adjusts the volume of the front presence R channel. J1
Adjustable range
0 to 100%
Default setting
33%
Decode Type
Selects a surround decoder.
Pro Logic
Reproduces sound using the Dolby Pro Logic
decoder. This is suitable for all kinds of audio sources.
PLIIx Movie /
PLII Movie
Reproduces sound using the Dolby Pro Logic IIx (or
Dolby Pro Logic II) decoder. This is suitable for
movies. J2
PLIIx Music /
PLII Music
Reproduces sound using the Dolby Pro Logic IIx (or
Dolby Pro Logic II) decoder. This is suitable for
music. J2
PLIIx Game /
PLII Game
Reproduces sound using the Dolby Pro Logic IIx (or
Dolby Pro Logic II) decoder. This is suitable for
games. J2
Neo:6 Cinema
Reproduces sound using the DTS Neo:6 decoder. This
is suitable for movies.
Neo:6 Music
Reproduces sound using the DTS Neo:6 decoder. This
is suitable for music.
Center Width
Spreads the center channel sound to the front left and right
speakers to suit your needs or preferences. Set this parameter to 0
for outputting the center sound from the center speaker only, or to 7
for outputting it from the front left/right speaker only.
Adjustable range
0 to 7
Default setting
3
Dimension
Adjusts the difference in level between the front sound field and
the surround sound field. You can adjust the difference in level
created by the software being played back to obtain the preferred
sound balance.
The surround sound gets stronger as you make the value more
negative, and the front sound gets stronger as you make the value
more positive.
Adjustable range
-3 to +3
Default setting
0
Dolby PLIIx Music and Dolby PLII Music only
When Neo:6 Music is selected
Panorama
Adjusts the soundscape of the front sound field. Sends front left/
right channels sounds to the surround speakers as well as the front
speakers for a wraparound effect.
Off (Default)
Disables the effect.
On
Enables the effect.
Center Image
Adjusts the front left and right channel output relative to the center
channel to make the center channel more or less dominant as
necessary.
Adjustable range
0.0 to 1.0
Default setting
0.3
J 1 : Not displayed when speakers are set to be inactive.
J 2 : You cannot select the Dolby Pro Logic IIx decoder in the following conditions:
• When “Surround Back” is set to “None” (☞p. 92).
• When headphones are connected.
En
88
SETUP
MAIN
ZONE 2
Setting various functions (Setup menu)
CODE SET
SOURCE RECEIVER
Various settings, such as speaker volume or HDMI functions, can be changed from the Setup menu.
AV
1
2
3
4
5
6
7
V-AUX
1
2
Operating the Setup menu
AUDIO
USB
NET
3
MULTI
1
2
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
Speaker
Adjusts parameters for speakers, such as
speaker status, and volume adjustment for
each speaker (☞p. 90).
Sound
Sets functions related to audio output,
such as adjustment of maximum volume
and of dynamic range (☞p. 94).
Video
Sets video output functions, such as video
conversion settings (resolution and aspect
ratio) (☞p. 96).
HDMI
Sets HDMI functions, such as the HDMI
Control function and output destination
for HDMI sound (☞p. 97).
DOCK
HDMI OUT
TUNER
Setup menus
4
TUNING
ENHANCER SUR. DECODE
Press jON SCREEN.
Press kCursor B / C repeatedly to select
“Setup” and press kENTER.
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
j
OPTION
VOLUME
ENTER
k
DISPLAY
TOP
MENU
POP-UP
MENU
Network
Sets network status, such as IP Address or
MAC Address Filter (☞p. 99).
Multi Zone
Sets multi-zone functions, such as
volume adjustment for speakers in the
secondary zone (☞p. 100).
4
Use kCursor B / C to select an item and
press kENTER.
When the selected item contains detailed ones, use
kCursor B / C to select the detailed item and press
kENTER.
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
3
Use kCursor D / E to select a menu and
press kENTER.
Function
ENT
INPUT
MUTE
Language
Sets functions such as the Auto Power
Down function, that make the unit easier
to use (☞p. 101).
Selects the language of the menus and
messages displayed on TV screen
(☞p. 104).
5
Use kCursor B / C / D / E to adjust the
setting.
Pressing kRETURN displays the previous menu
screen. Repeat steps 4 to 5 to adjust multiple settings.
6
Press jON SCREEN to close the menu.
j ON SCREEN
k Cursor B / C / D / E
k ENTER
k RETURN
En
89
SETUP
Setting various functions (Setup menu)
Setup menu
Manages settings for speakers
Speaker
Auto Setup
Manual Setup
Sound
Lipsync
Dynamic Range
Max Volume
Initial Volume
Pure Direct Mode
Adaptive DSP Level
Video
Analog to Analog Conversion
Processing
HDMI
HDMI Control
Control Select
ARC (Audio Return Channel)
TV Audio Input
Audio Output
Standby Through
Network
IP Address
Network Standby
MAC Address Filter
Multi Zone
Zone2 Set
Monitor Out Assign
Party Mode Set
Zone Scene Rename
Zone Rename
Speaker setup items
Auto Setup
Optimizes the speaker configuration automatically.
Manual Setup
Manually adjusts parameters for speakers.
Setting Pattern
Registers two speaker setting patterns and switches
between the two.
Setting Data Copy
Copies “Setting Pattern” data.
Power Amp Assign
Adds the extra speakers to the 7.1-channel speaker
connection.
Configuration
Manually manages speaker configuration, such as
speaker size (sound production capacity), and bass
audio processing.
Distance
Manually adjusts the output of each speaker based on
distance to the listening position.
Level
Manually adjusts the volume of each speaker.
Parametric EQ
Selects an equalizer to adjust speaker output
characteristics.
Test Tone
Generates test tones.
■ Automatic speaker setup
Auto Setup
Optimizes the speaker configuration automatically using YPAO
(☞p. 38).
■ Manual speaker setup
Manual Setup
The following parameters can be specified manually.
Setting Pattern
Registers two patterns for “Power Amp Assign,” “Configuration,”
“Level,” “Distance,” and “Parametric EQ” settings and switches
between the two setting patterns.
When the automatic speaker setup (YPAO) is performed, the result
of measurement is registered on the currently selected Setting
Pattern.
Setting Data Copy
Copies “Setting Pattern” data in the specified direction.
Pattern1
2
Copies Pattern1 settings to Pattern2.
Pattern2
1
Copies Pattern2 settings to Pattern1.
Function
Auto Power Down
Input Assignment
Display Set
Trigger Output1
Trigger Output2
Memory Guard
Language
En
90
SETUP
Setting various functions (Setup menu)
Power Amp Assign
In addition to the 7.1-channel speaker connection, various speaker
configurations are possible using the presence speakers connection,
bi-amp connection or multi-zone function (☞p. 19, p. 20).
In the “Configuration,” you can select the speaker size
characteristic (Large or Small). Select the size (sound
reproduction capacity) that matches your speakers.
Woofer diameter
• 16 cm or larger → Large
• 16 cm or smaller → Small
7ch Normal
Enables the normal 7-channel speakers and front
presence speakers (☞p. 16).
7ch +1ZONE
Enables the normal 7-channel speakers and zone2
speakers (☞p. 18).
5chBI-AMP
Enables the bi-amp connection (☞p. 18).
5chBI-AMP +SB
Enables the bi-amp connection and external surround
back speakers (☞p. 23).
Configuration
Displays the speakers connected to this unit or changes the sizes of
the speakers.
When speaker size is set to “Small,” low-frequency components
of the speakers that you configured are produced from the
subwoofer (or from the front speakers if there is no subwoofer).
Surround
Selects the size of the surround speakers.
Large
Select this when the surround speakers are large.
Small (Default)
Select this when the surround speakers are small.
None
Select this when no surround speakers are connected.
The front speakers will produce surround channel
audio signals.
• When set to “None,” no sound is produced from the surround
back speaker even if that speaker is connected.
• When set to “None,” the sound programs will change to Virtual
CINEMA DSP mode.
Front
Selects the size (sound reproduction capacity) of the front
speakers. J1
Large
Select this for large speakers. The front speakers will
produce all of the front channel frequency
components.
Small (Default)
Select this for small speakers. The subwoofer will
produce front channel low-frequency
components. J2
Center
Selects the size of the center speaker.
Large
Select this when a large center speaker is connected.
Small (Default)
Select this when a small center speaker is connected.
None
Select this when there is no center speaker. The front
speakers will produce center channel audio.
J 1 : When “Subwoofer” is set to “None,” you can only choose “Large.” If the front
speaker setting is “Small” and you change “Subwoofer” to “None,” it will
automatically change to “Large.”
J 2 : You can set the low-frequency components of audio signals transmitted from
the front speakers to the subwoofer by using “Bass Cross Over.”
En
91
SETUP
Setting various functions (Setup menu)
Surround Back
Selects the size of the surround back speakers.
Largex1
Select when one large surround back speaker is
connected.
Largex2
Select when two large surround back speakers are
connected.
Smallx1
Select when one small surround back speaker is
connected.
Smallx2 (Default)
Select when two small surround back speakers are
connected.
None
Select this when no surround back speakers are
connected.
• When there are no surround speakers are connected, the setting
will automatically change to “None.”
• You can set surround back audio signals, including from the
playback source, to be mixed down and produced from a single
speaker (6.1-channel layout) or produced from left and right
surround speakers (5.1-channel layout).
Subwoofer
Confirms the subwoofer.
Use (Default)
None
Select this when front presence speakers are
connected.
None
Select this when front presence speakers are not
connected.
Select this when subwoofer is not connected. The
front speakers will produce audio from the LFE (low
frequency effect) channel and bass frequency audio
from other channels when “Subwoofer” is set to
“None.”
40Hz
110Hz
60Hz
120Hz
80Hz (Default)
160Hz
90Hz
200Hz
100Hz
Extra Bass
Allows the front channel low-frequency components to be
produced exclusively by the subwoofer, or by both the subwoofer
and the front speakers.
Off (Default)
Depending on the size of the front speakers, either the
front speakers or the subwoofer produce the front
channel low-frequency components.
On
The subwoofer and the front speakers produce the
front channel low-frequency components.
Front Presence
Specify connection of front presence speakers.
Use (Default)
Select this when subwoofer is connected. During
playback, the subwoofer will produce audio from the
LFE (low-frequency effect) channel and bass audio
from other channels. J1
Select the phase of the subwoofer from the following
items if the bass audio is lacking or unclear.
Normal (Default) Does not change the subwoofer
phase.
Reverse
Reverses the subwoofer phase.
Bass Cross Over
Sets the lower limit of low-frequency component which is
produced from speakers of which the size is set to “Small.”
A frequency sound which is lower than the specified frequency will
be produced from the subwoofer or the front speakers. J2
When “Subwoofer” is set to “None” or “Front” is set to “Small,”
“Extra Bass” is disabled.
J 1 : Enabling “Extra Bass” allows both the subwoofer and the front speakers to
produce bass audio.
J 2 : If your subwoofer has a volume control or a crossover frequency control, set
the crossover frequency to maximum and the volume to half (or slightly less).
En
92
SETUP
MAIN
Setting various functions (Setup menu)
ZONE 2
CODE SET
SOURCE RECEIVER
Distance
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
Adjusts the timing at which the speakers produce audio
so that sounds from the speakers reach the listening
position at the same time.
AUDIO
4
Selecting adjustment units
DOCK
HDMI OUT
TUNER
FM
INFO
Use kCursor B / C to select the unit for distance
(meters or feet), and press kENTER.
PHONO
AM
PRESET
TUNING
Setting distances for each speaker
MEMORY
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
j
Use kCursor B / C to select the speaker you want to
configure, and press kENTER.
Then use kCursor D / E to set the distance from the
speaker to your listening position.
Adjustable range
OPTION
VOLUME
ENTER
RETURN
Parametric EQ
k Default setting
TOP
MENU
POP-UP
MENU
MUTE
PEQ Select
Select an equalizer type.
Manual
Manually adjust equalizer sound.
Flat
Adjust individual speakers to achieve the
same characteristics. Select this option if
speakers offer the same quality.
Front
Adjust individual speakers to achieve the
same characteristics as the front left and
right speakers. Select this option if front
left and right speakers offer significantly
greater quality than other speakers.
1.0 ft. to 80.0 ft. (0.30 m to 24.00 m)
10.0 ft. (3.00 m)
DISPLAY
Adjustment
increments
Adjusts sound quality of tone using a parametric
equalizer.
Natural
Adjust all speakers to achieve a natural
sound. Select this if high-frequency
sounds seem too strong when “PEQ
Select” is set to “Flat.”
0.2 ft. (0.05 m)
REC
Through (Default)
Level
1
2
3
4
5
6
7
8
9
0
10
ENT
INPUT
MUTE
Separately adjusts the volume of each speaker.
Use kCursor B / C to select the desired speaker, and
press kENTER.
Then use kCursor D / E to adjust the volume for the
selected speaker.
PEQ Data Copy
Select 1 of the 3 parametric equalizer types acquired with
automatic setup and manually copy that information to the
manual adjustments.
Flat
j ON SCREEN
k Cursor B / C / D / E
k ENTER
Adjustable range
-10.0 dB to +10.0 dB
Default setting
0.0 dB
Adjustment
increments
0.5 dB
Disable the equalizer.
Manual
Front
Natural
Manual
Manual
Copy the “Flat” parametric equalizer
information acquired with automatic
setup.
Front L/ Front R / Center / Surround L / Surround R /
Surround Back L / Surround Back R / Front Presence L /
Front Presence R
The parametric equalizer can be used to manually adjust
sound quality for individual speakers.
Set “PEQ Select” to “Manual” and use “PEQ Data
Copy” to copy information acquired with automatic
setup. This information can be used as a basis for
performing manual adjustments.
1
Use kCursor B / C repeatedly to select
“Band / Gain,” “Freq. / Gain,” or “Q / Gain”
and press kENTER.
2
Use kCursor D / E repeatedly to adjust the
parameter and use kCursor B / C
repeatedly to adjust the gain.
3
4
Press kENTER to exit the edit window.
Repeat steps 1 to 3 to configure other
parameters.
To reset all parameter settings for the selected
speaker, select “Yes” in “Reset” and press kENTER.
5
Press jON SCREEN to close the menu.
Copy the “Front” parametric equalizer
information acquired with automatic
setup.
Copy the “Natural” parametric equalizer
information acquired with automatic
setup.
En
93
SETUP
Setting various functions (Setup menu)
Test Tone
Turns the test tone generator on or off.
Off (Default)
Does not generate test tones.
On
Generates test tones. While “On” is selected, test
tones are produced constantly.
You can use the test tone in a variety of circumstances. For
example, you can adjust the volume balance settings for each
speaker, or whenever you adjust the settings on the internal
parametric equalizer, you can listen to the actual effect while
operating this unit. Turn the test tone off when you have finished
making adjustments.
Setting the audio output function of this
unit
■ Synchronizing audio/video output
Lipsync
Adjusts the delay between audio and video output (Lipsync
function).
Selects a compensation method for the delay between audio and
video output.
Auto (Default) J1
When connecting to a TV via HDMI, automatically
adjusts output timing if the TV supports an automatic
lipsync function.
Manual
Manually adjusts the correction time. Select this when
the monitor does not support the automatic lipsync
function.
Adjustable range
0 ms to 250 ms
Default setting
0 ms
Adjustment
increments
1 ms
Sound setup items
Lipsync
Adjusts the delay between video and audio output.
Dynamic Range
Selects the dynamic range adjustment method for
Dolby Digital and DTS playback.
Max Volume
Sets the maximum volume for this receiver.
Initial Volume
Sets the initial volume for when this receiver is turned
on.
Pure Direct Mode
Selects whether or not this unit outputs video signal in
the Pure Direct Mode.
Adaptive DSP Level
Adjusts the level of DSP effect in conjunction with the
volume level.
J 1 : The setting is effective at the HDMI OUT jack selected by using rHDMI
OUT.
En
94
SETUP
Setting various functions (Setup menu)
■ Auto-adjusting Dolby Digital and DTS
dynamic range
■ Setting the startup volume
Initial Volume
Dynamic Range
Selects the dynamic range adjustment method for audio bitstream
(Dolby Digital and DTS) signal playback.
Adaptive DSP Level
Sets the initial volume for when this receiver is turned on. When
this parameter is set to “Off,” the volume is set at the level when the
receiver last entered standby mode. J1
MAX (Default)
Produces audio without adjusting the dynamic range.
Adjustable range
Off, Mute, -80.0 dB to +16.5 dB
STD
Adjusts the dynamic range for optimum volume for
regular home use.
Default setting
Off
(MIN) Sets the dynamic range suitable for low
volume or a quiet environment, such as at night, for
bitstream signals except for Dolby TrueHD signals.
(AUTO) Adjusts the dynamic range for Dolby
TrueHD signals based on input signal information.
Adjustment
increments
0.5 dB
MIN/AUTO
■ Setting the maximum volume
■ Adjusting DSP effect and volume level
■ Video signal output in Pure Direct Mode
Automatically adjust the level of DSP effect in conjunction with
the volume level.
Off
Disables automatic adjustment of the level of DSP
effect.
On (Default)
Adjusts the degree of DSP effect in conjunction with
volume level. The higher the volume level, the less the
DSP effect applied. The lower the volume level, the
greater the DSP effect applied.
This feature also corrects sound effect according to
the result of automatic measurement.
Pure Direct Mode
Selects whether or not this unit outputs video signal in the Pure
Direct Mode.
Max Volume
Auto (Default)
Automatically output video signal when the input
source equipping video signal input jacks or content
window is selected. If no video signal is input, only
the wall paper is displayed.
Video Off
Does not output video signals including the wall
paper.
Specify the maximum volume level so that sound is not too loud.
The default setting of +16.5 dB produces the highest volume.
Adjustable range
-30.0 dB to +16.5 dB (maximum volume)
Default setting
+16.5 dB
Adjustment
increments
5.0 dB
J 1 : When you set “Max Volume” at a lower level than “Initial Volume,” “Max
Volume” has priority.
En
95
SETUP
Setting various functions (Setup menu)
Setting this unit’s video output function
■ Analog-to-analog video conversion
■ Adjusting video with conversion of video
signal to HDMI
Analog to Analog Conversion
Enables or disables video conversion between analog video jacks.
Processing
Adjust video with conversion of video input to HDMI video.
Off
On (Default)
Disables video conversion between analog video
jacks.
Off (Default)
Video are not adjusted with processing.
Enables video conversion between analog video jacks.
On
Video are adjusted with processing.
Resolution J1
Video setup items
Analog to Analog
Conversion
Processing
Enable or disable video conversion between analog
video jacks.
Enable or disable adjustment of resolution, aspect
ratio and video signal correction for video signal
converted to HDMI video.
• Analog-to-HDMI video conversion is always possible unless
video signals are being input at the HDMI input jacks or 1080presolution analog video signals are being input (☞p. 130).
• This unit does not convert 480 line video signals and 576 line
video signals interchangeably.
• 480p-, 576p-, 1080i- and 720p-resolution video signals can not
be output at the S-video and video jacks of MON.OUT/ZONE
OUT (☞p. 130).
• The converted video signals are only output at the MONITOR
OUT jacks.
• When composite video or S-video signals from a VCR are
converted into component video signals, the picture quality may
suffer depending on your VCR.
• Unconventional signals input at the composite video or S-video
jacks cannot be converted or may be output abnormally. In such
cases, set “Analog to Analog Conversion” to “Off.”
Auto (Default)
Automatic upscaling in accordance with TV resolution.
480p (576p)
Upscaling to 480p (576p).
720p
Upscaling to 720p.
1080i
Upscaling to 1080i.
1080p
Upscaling to 1080p.
Through
No upscaling.
• The 720p-, 1080i- and 1080p-resolution video signals cannot be
upscaled (☞p. 130).
• When a TV is connected to this unit via the HDMI jack, this unit
automatically detects a resolution that the TV supports. Only the
detected resolution can be selected.
• If this unit cannot detect the resolution that the TV supports, set
“MONITOR CHECK” in the Advanced Setup menu to “SKIP”
(☞p. 112) and try again.
Aspect J1
Specifies the method used to convert video signal with a 4:3 aspect
ratio (480i/576i/480p/576p) to the 16:9 aspect ratio (720p/1080i/
1080p).
Through (Default)
Does not adjust the aspect ratio of video signal sources.
16:9 Normal
Transmits 4:3 aspect ratio video signals to a 16:9 TV
with black bands on either side of the screen.
J 1 : This item can be set when set “Processing” to “On.”
En
96
SETUP
Setting various functions (Setup menu)
Setting HDMI functions
■ Receiver operation via TV (HDMI Control)
■ Listening to TV audio via single HDMI
cable (Audio Return Channel)
HDMI Control
Set the HDMI Control function to “On” to operate devices
connected via HDMI. If the TV or other external components
support HDMI Control (e.g., Panasonic VIERA Link), you can use
the remote controls of those devices to operate some of this unit’s
functions, and to synchronize this unit with the operation of those
devices.
Refer to “Using the HDMI Control function” (☞p. 114) for setting
instructions.
HDMI setup items
HDMI Control
Turns the HDMI Control on or off.
Control Select
Choose an HDMI OUT jack on which HDMI
Control function is enabled.
ARC (Audio Return
Channel)
Turns the Audio Return Channel function on or
off.
TV Audio Input
Chooses automatically selected audio input in
conjunction with TV operation when the
HDMI Control is turned on.
Audio Output
Standby Through J1
Specifies whether or not audio signal is output
through this unit and a TV connected via the
HDMI OUT 1-2 jacks.
Turns the Standby Through function on or off.
Off (Default)
Sets HDMI Control to “Off.”
On
Sets HDMI Control to “On.” J2
If this unit is connected to HDMI devices that do not support the
HDMI Control function, these functions will not operate.
■ Selecting an HDMI OUT jack for the HDMI
Control function
Control Select
Select the HDMI OUT jack that utilizes the HDMI Control
function.
Refer to “Using the HDMI Control function” (☞p. 114) for setting
instructions.
OUT1(TV1)
Applies the HDMI Control function for the HDMI
OUT 1 jack.
OUT2(TV2)
Applies the HDMI Control function for the HDMI
OUT 2 jack.
ARC (Audio Return Channel)
You can enable or disable the Audio Return Channel function.
When using a TV that supports Audio Return Channel function and
the function is enabled, the TV’s audio output is transmit to this
unit via an HDMI cable.
The TV audio input to this unit is regarded as the input source
selected in “TV Audio Input.” J3
By means of this function, you do not need to connect the TV’s
audio output (digital audio output or analog audio output) to the
unit.
Off (Default)
Sets the Audio Return Channel to “Off.”
On
Sets the Audio Return Channel to “On.”
When the TV audio is input to the unit using Audio Return
Channel, “TV” is displayed on the front panel display.
TV
AUDIO1
TheBottomLin
VOLUME
• “ARC (Audio Return Channel)” is enabled only for the HDMI
OUT 1 or 2 jack selected with “Control Select.”
• Refer to “Single HDMI cable input to TV audio with Audio
Return Channel function” (☞p. 116) for setting instructions.
We recommend to unplug and plug again the power cable of this
unit and the TV when changing the Control Select.
J 1 : This item appears depending on “HDMI Control.”
J 2 : When the HDMI Control is “On,” the Standby Through function is
automatically enabled. When this unit enters standby mode, the audio and
video signals from the last-selected HDMI input source will continue to be
transmitted to the TV. The HDMI input source can only be changed using the
remote control.
J 3 : While the Audio Return Channel function is on, the jack selected for the input
source cannot be used.
En
97
SETUP
Setting various functions (Setup menu)
■ Selecting an input source to assign audio
input for the TV
■ Specify whether or not audio signal is
output through this unit and a TV
connected via the HDMI OUT jack
TV Audio Input
Select the input source that receives audio signals from TV while
the HDMI Control function is on.
When the TV is set to output sounds via this unit, the TV audio
input is automatically selected to the input source assigned
here. J1
TV1
Audio Output
Choose whether audio from an external component, such as a BD/
DVD player, connected via HDMI is played back through this unit
or through a TV.
Amp
Specify whether or not audio signal is output through this unit.
Audio input
AUDIO1-4
Off
Audio is not output through this unit.
Default setting
AUDIO1
On (Default)
Audio is output through this unit. When this setting is
selected, audio from the external component is output
in a format compatible with this unit.
TV2
Audio input
AUDIO1-4
Default setting
AUDIO3
• “TV Audio Input” is enabled only for the HDMI OUT 1 or 2 jack
selected with “Control Select.”
• Refer to “Switching the input source on this unit automatically
when listening to TV audio” (☞p. 115) for instructions.
OUT1
Specify whether or not audio signal is output through a TV
connected via the HDMI OUT 1 jack.
Off (Default)
Audio is not output through a TV connected via the
HDMI OUT 1 jack.
On
Outputs audio through a TV connected via the HDMI
OUT 1 jack. When this setting is selected, audio from
the external component is output in a format
compatible with the TV.
OUT2
Specify whether or not audio signal is output through a TV
connected via the HDMI OUT 2 jack.
Off (Default)
Audio is not output through a TV connected via the
HDMI OUT 2 jack.
On
Outputs audio through a TV connected via the HDMI
OUT 2 jack. When this setting is selected, audio from
the external component is output in a format
compatible with the TV.
When “HDMI Control” is set to “On,” the settings of “Amp”
and the output jack (OUT1 or OUT2) selected with Control
Select are interlocked with HDMI Control.
■ Transmitting HDMI audio/video to the TV
during standby mode (Standby Through)
Standby Through
This function allows audio/video signals from HDMI inputs to
continue to be transmitted to a TV when this unit is in standby mode.
When the Standby Through function is “On,” audio/video signals
continue to be output to the TV from the last HDMI input source
before this unit enters standby mode. The HDMI input source can be
selected using dAV1-7 or dV-AUX in standby mode.
Off (Default)
Sets Standby Through to “Off.”
On
Transmits audio/video signals from the selected
HDMI input source to the TV.
• When “HDMI Control” is “On,” Standby Through function is
automatically enabled and “Standby Through” is not displayed.
• When the Standby Through function is on, the HDMI Through/
iPod Charge indicator on the front panel lights during the standby
mode. This unit consumes 2 to 5 W of power.
• Input source can be selected during Standby Through.
J 1 : While the Audio Return Channel function is on, the jack selected for the input
source cannot be used.
En
98
SETUP
Setting various functions (Setup menu)
Adjusting this unit’s network parameters
■ Setting the network parameters (IP
address, etc.)
IP Address
DHCP
IP Address
Selects whether this unit acquires the network
parameters (IP address, etc.) from the network’s
DHCP server automatically, or whether these
parameters are specified manually.
Network Standby
Selects whether or not commands are accepted over
the network when this unit is in standby mode.
MAC Address Filter
Sets the MAC address filter to restrict network access
to this unit.
the network when in the standby mode
Network Standby
Selects whether or not this unit automatically acquires network
parameters (IP address, subnet mask, default gateway, primary
DNS server and secondary DNS server) from a network device
such as a router equipped with DHCP function.
Network setup items
■ Turning this unit on by the command over
Off
Select this setting to specify IP address manually.
On (Default)
Select this setting to acquire IP address from the
network’s DHCP server automatically.
Manual Setup
IP Address
Specifies the IP address assigned to this unit. An IP
address used by another device on the same network
may not be used.
Subnet Mask
Specifies the subnet mask assigned to this unit.
Default Gateway
Specifies the IP address of the default gateway.
DNS Server
(Primary)/DNS
Server (Secondary)
Specifies the IP addresses of the primary and
secondary Domain Name System (DNS) servers.
If you have only one DNS address, enter the DNS address in
“DNS Server (Primary).” If the network has two or more DNS
addresses, enter one of the addresses in “DNS Server (Primary)”
and another in “DNS Server (Secondary).”
Selects whether or not to turn this unit on by the command over the
network when in the standby mode.
Off (Default)
Disables to turn this unit on by the command over the
network.
On
Enables to turn this unit on by the command over the
network.
When “Network Standby” is set to “On,” this unit can be turned
on by the command over the network during the standby mode
with the power consumption of about only 5 W.
■ Setting the MAC Address Filter
MAC Address Filter
Sets MAC address filter to restrict access to this unit via LAN.
Mode
Off (Default)
Disables the MAC address filter function.
On
Permits access to this unit only from network devices
with the specified MAC addresses.
Address Setup
Specifies the MAC addresses of network devices permitted to
access to this unit when “MAC Address Filter” is set to “On.”
En
99
SETUP
Setting various functions (Setup menu)
Setting this unit’s multi-zone function
■ Adjusting Zone2 volume
■ Displaying the video on the TV monitor in
Zone2
Zone2 Set
Volume
Selects whether or not volume level adjustment of Zone2 speakers
is enabled.
Multi Zone setup items
Zone2 Set
Sets the Zone2 functions.
Monitor Out Assign
Displays the menus of Zone2 on the TV monitor.
Party Mode Set
Enable or disable the party mode function.
Zone Scene Rename
Changes the scene names of Zone2.
Zone Rename
Changes the name of Zone2.
Fixed
Disables volume level adjustment of Zone2 speakers.
Variable (Default)
Enables volume level adjustment of Zone2 speakers.
When setting the Power Amp Assign function, “Volume” is
automatically set to “Variable.” Refer “Speaker layout”
(☞p. 16) for details on the Power Amp Assign function.
Max Volume
Specify the maximum volume level in Zone2 so that sound is not
too loud.
Adjustable range
-30.0 dB to +16.5 dB (maximum volume)
Default setting
+16.5 dB
Adjustment
increments
5.0 dB
Monitor Out Assign
Sets the component video, S-video or video (MONITOR OUT/
ZONE OUT) jacks for the main zone, Zone2 use. When a TV
monitor in the main zone is connected via one of the HDMI OUT
jacks, MON.OUT jacks can be used to connect another monitor in
Zone2.
Main (Default)
Outputs the video signals for the main zone.
Zone2
Outputs the video signals for Zone2.
■ Setting the party mode
Party Mode Set
In party mode, the main zone sources can be played in Zone2
simultaneously (☞p. 120). The party mode function can be
enabled or disabled individually for Zone2.
Target : Zone2
Disable
Disables the party mode function in Zone2.
Enable (Default)
Enables the party mode function in Zone2.
Initial Volume
Specify the initial volume level in Zone2 when this unit is turned on.
Adjustable range
Off, Mute, -80.0 dB to +16.5 dB
Default setting
Off
Adjustment
increments
0.5 dB
Mono
Switches between stereo and monaural modes for Zone2 audio
signal.
Off (Default)
Does not convert Zone2 audio signal to monaural
sound.
On
Converts Zone2 audio signal to monaural sound.
En
100
SETUP
MAIN
Setting various functions (Setup menu)
ZONE 2
CODE SET
■ Changing Zone2 scene name
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
Zone Scene Rename
Editing the name of the selected scene in Zone2.
AUDIO
4
DOCK
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
Use kCursor B / C repeatedly to select
“Zone Scene Rename” and press
kENTER.
2
3
Press kENTER.
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
• To cancel the operation without applying changes,
select “CANCEL” and press kENTER.
• To clear the characters entered in step 5, select
“CLEAR” and press kENTER.
• Scene names may consist of up to 20 characters.
Press kCursor B / C to select a scene you
want to rename and press kENTER.
■ Changing Zone name
VOLUME
Editing the name of the selected zone.
RETURN
1
2
k
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
1
2
3
5
6
7
9
0
10
6
7
Confirm the zone name by pressing
kENTER.
Press kCursor C to select “OK” and press
kENTER to register the new zone name.
• To cancel the operation without applying changes,
select “CANCEL” and press kENTER.
• To clear the characters entered in step 4, select
“CLEAR” and press kENTER.
• Zone names may consist of up to 9 characters.
Zone Rename
OPTION
ENTER
Press kCursor C to select “OK” and press
kENTER to register the new scene name.
TUNING
ENHANCER SUR. DECODE
ON SCREEN
1
8
Making the receiver easier to use
Use kCursor B / C repeatedly to select
“Zone Rename” and press kENTER.
Press kCursor B / C to select a zone you
want to rename and press kENTER.
4
8
ENT
INPUT
4
Press kENTER.
Function setup items
Editing the name is available.
Auto Power Down
This unit enters standby mode if no
operations are performed.
Input Assignment
Assigns the input jack to the selected
input source.
Display Set
Specifies menu items displayed on TV
screen and the front panel.
Trigger Output1
Specifies TRIGGER OUT 1 jack
function.
Trigger Output2
Specifies TRIGGER OUT 2 jack
function.
Memory Guard
Protects some settings against accidental
modification.
MUTE
5
k Cursor B / C / D / E
k ENTER
6
7
Press kCursor B / C to select a character,
and press kCursor D / E to enter the
selected character.
Repeat step 5 to enter the desired scene
name.
Confirm the zone name by pressing
kENTER.
3
Press kENTER.
4
Press kCursor B / C to select a character
and press kCursor D / E to enter the
selected character.
5
Repeat step 4 to enter the desired zone
name.
Editing the name is available.
En
101
SETUP
MAIN
Setting various functions (Setup menu)
ZONE 2
CODE SET
■ Entering standby mode
SOURCE RECEIVER
automatically when no operations
are performed
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
4
USB
NET
MULTI
DOCK
Auto Power Down
If you do not operate this unit or use the remote control
for an extended period of time, it will automatically go
into standby mode (Auto Power Down function). This
function’s default setting is “Off.” When you want to
enable this function, set the amount of time to pass
before this unit will enter standby.
HDMI OUT
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
TUNING
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
4Hours
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
OPTION
VOLUME
ENTER
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
output jacks
Goes into standby mode, when you have
not operated this unit for four hours.
8Hours
Goes into standby mode, when you have
not operated this unit for eight hours.
12Hours
Goes into standby mode, when you have
not operated this unit for twelve hours.
Off (Default)
Auto Power Down function is disabled.
k
2
3
5
6
7
9
0
10
4
8
ENT
Example: Assigning the OPTICAL input jack to
“AV1.”
1
Press kENTER to display the “Input
Assignment” screen.
This unit starts a countdown of 30 seconds before
entering the standby mode. Pressing any key of the
remote control during the countdown cancels entering
the standby mode and reset the timer.
Select “None” to clear the existing assignment.
The choices indicate the following jacks.
a, b, f
: COAXIAL jacks
c, d, e
: OPTICAL jacks
, , ,
: COMPONENT VIDEO jacks
The choices indicate the jacks marked the same
alphanumeric on the rear of this unit. For details on
marks on the rear of this unit, refer to “Rear panel”
(☞p. 10).
4
INPUT
MUTE
2
k Cursor B / C / D / E
k ENTER
k RETURN
Press kCursor D / E to select “c” and then
press kENTER.
Assigns the coaxial or optical input jack(s) to the
selected input source when this unit’s initial settings do
not correspond to your needs. Change the parameter to
reassign the respective jacks and effectively connect
more components.
Once the input jacks are reassigned, the corresponding
component can be selected using the Input selector
buttons.
REC
1
3
Input Assignment
AUDIO
TUNER
■ Assigning component input and
Press kCursor B / C / D / E to select the
cell at the intersection with the “AV1” and
“Coax/Opt” and then press kENTER.
Press kRETURN to apply change and
return to the previous screen.
• A specific item cannot be selected more than once for
the same type of jack.
• Only component, coaxial and optical jacks can be
reassigned.
• Coaxial and optical jacks cannot be assigned to the
input at the same time.
En
102
SETUP
Setting various functions (Setup menu)
■ Specifying menu display
Display Set
■ Setting TRIGGER OUT functions
Trigger Output1
Specify front panel display brightness and TV screen wall paper.
Trigger Output2
Front Panel Display
Specify front panel display brightness and message scroll pattern.
Dimmer
Scroll
Adjustable range: -4 - 0
Reduce brightness of the front panel display. As the
value is lowered, the panel display darkens.
Selects the manner in which display scrolls when the
total number of characters exceeds the display area on
the front panel display.
Select “Continue” for continuous scrolling of all
characters.
Select “Once” to scroll through all characters once
and then halt scrolling for display of only the first 14
characters.
Wall Paper
Specify the wall paper displayed on the TV screen when no video
signal is input. Select one that you prefer.
Picture 1-3
Displays an image on the TV screen when there is no
video signal.
Gray
Displays a gray background on the TV screen when
there is no video signal.
Target Zone
Specify the zone with which TRIGGER OUT 1 or 2 jack function
is synchronized.
Main
When “Trigger Mode” is set to “Power,” electronic
signal transmission is synchronized with the power
status of the main zone.
When “Trigger Mode” is set to “Source,” electronic
signal transmission is synchronized with input
switching in the main zone.
Zone2
When “Trigger Mode” is set to “Power,” electronic
signal transmission is synchronized with the power
status of Zone2.
When “Trigger Mode” is set to “Source,” electronic
signal transmission is synchronized with input
switching in Zone2.
All (Default)
When “Trigger Mode” is set to “Power,” electronic
signal transmission is synchronized with the power
status of the main zone or Zone2.
When “Trigger Mode” is set to “Source,” electronic
signal transmission is synchronized with input
switching in the main zone or Zone2.
Synchronizes TRIGGER OUT 1 or 2 jack function with the power
status of each zone or input switching.
Trigger Mode
Specify timing of electronic signal transmission to the TRIGGER
OUT 1 or 2 jack.
Power (Default)
TRIGGER OUT 1 or 2 jack function is synchronized
with the power status of the zone specified with
“Target Zone.”
Source
TRIGGER OUT 1 or 2 jack function is synchronized
with input switching in the zone specified with
“Target Zone.”
Electronic signal is transmitted according to the
“Target Source” setting.
Manual
Select this to manually switch the output level for
electronic signal transmission with “Manual.”
En
103
SETUP
Setting various functions (Setup menu)
Target Source
Specify the output level of electronic signal transmitted each time
input is switched.
Low J1
Terminates electronic signal transmission when the
input source specified with this option is selected.
High (Default) J2
Electronic signal is transmitted when the input source
specified with this option is selected.
This setting is available only when “Trigger Mode” is set to
“Source.”
Manual
Manually switch the output level for electronic signal transmission.
This setting can also be used to confirm proper function of the
external component connected via the TRIGGER OUT 1 or 2 jack.
Low J1
Stops the electronic signal transmission.
High (Default) J2
Transmits the electronic signal.
■ Prohibiting setting changes
Language
Memory Guard
Prohibits setting changes to prevent careless changes being made
to the settings on Setup menu.
Off (Default)
Settings are not protected.
On
Prohibits changes to the settings on Setup menu until
it is returned to “Off.”
While set to “On,” the unit displays “Memory
Guard!” when an attempt is made to change the
settings.
Select the language used for display of menus and messages. J3
Choices: English (English),
(Japanese),
(French),
(German),
(Spanish),
(Russian)
For details on selecting a language, refer to “Language
selection” (☞p. 2).
This setting is available only when “Trigger Mode” is set to
“Manual.”
J 1 : This unit outputs 0 V when selecting “Low.”
J 2 : This unit outputs 12 V when selecting “High.”
J 3 : Content window information is displayed in the language in which that
information was released.
En
104
SETUP
MAIN
ZONE 2
Confirming information of this unit (Information menu)
CODE SET
SOURCE RECEIVER
A variety of information for this unit can be displayed.
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
4
USB
NET
MULTI
DOCK
Selecting information
AUDIO
HDMI OUT
TUNER
FM
AM
PRESET
INFO
1
PHONO
Press jON SCREEN.
■ Audio Signal information
■ Video Signal information
Displays information on the current audio signal.
Displays information on the current video signal.
Format
Signal format. When this unit is unable to
detect a digital signal, it automatically
switches to analog input.
HDMI Signal
Source video signal type and video signal
output to this unit’s HDMI OUT 1-2
jacks.
Sampling
The number of samples taken per second
from a continuous signal to make a
discrete signal.
HDMI Resolution
Input signal (analog or HDMI) and output
signal (HDMI) resolution.
Analog Resolution
Channel
The number of source channels in the
input signal (front/surround/LFE). For
example, a multi-channel soundtrack with
3 front channels, 2 surround channels and
LFE is displayed as “3/2/0.1”.
Resolution of the source video signal and
the analog video signal output to this
unit’s MONITOR OUT jacks.
HDMI Error
Error message for HDMI sources or
connected HDMI devices (☞p. 121).
This information is displayed only when
the error come up.
TUNING
MEMORY
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
j
OPTION
VOLUME
ENTER
RETURN
k
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
2
Use kCursor B / C to select “Information”
and press kENTER.
REC
1
2
3
4
5
6
7
8
9
0
10
The number of bits passing a given point
per second.
Dialogue
The dialogue normalization level preset
to the current input bitstream signal.
■ HDMI Monitor information
Displays information on the TV screen connected to this
unit’s HDMI OUT 1-2 jacks.
ENT
INPUT
MUTE
j ON SCREEN
k Cursor B / C / D / E
k ENTER
Bitrate
3
Use kCursor D / E to select an Information
menu and press kENTER.
• “---” is displayed when this unit cannot display the
corresponding information.
• Some high-definition audio bitstream contents may not
include the discrete surround back left and right
channel signals, but are encoded at a sampling rate of
192 kHz.
• Even when direct bitstream output settings are applied,
some players convert the Dolby TrueHD or Dolby
Digital Plus bitstreams to the Dolby Digital bitstreams,
while converting DTS-HD Master Audio or DTS-HD
High Resolution Audio bitstreams to DTS bitstreams.
Interface
Displays information on the current
connection interface.
Video Resolution
Displays the frequency for each video
resolution of the TV currently connected.
En
105
SETUP
Confirming information of this unit (Information menu)
■ Network information
Displays information on the network status. Refer to “Adjusting
this unit’s network parameters” (☞p. 99) for details on setting the
network status.
IP Address /
Subnet Mask /
Default Gateway
Displays the status of the current IP address assigned
to this unit.
DNS Server (P) /
DNS Server (S)
Displays the IP address of the primary and secondary
DNS (Domain Name System) servers.
MAC Address
Displays the MAC address filter set to this unit.
Status
Displays the network status of this unit.
■ System information
Displays information on the current settings of the advanced setup.
Remote ID
Displays the Remote ID set to this unit.
TV Format
Displays the TV format set to this unit.
Speaker Impedance
Displays the speaker impedance set to this unit.
System ID
Displays the system ID of this unit.
Firmware Version
Displays the current version of the firmware installed
to this unit.
When detecting the latest firmware over a network:
– exclamation point appears on the Information menu icon
– message indicating that the latest firmware is released appears
in the System information
In this case, update the latest firmware by using “NETWORK”
of “FIRM UPDATE” in Advanced Setup menu.
■ Zone information
Displays information on the currently selected input and the
volume of Zone2.
En
106
SETUP
MAIN
ZONE 2
CODE SET
SOURCE RECEIVER
c
p
You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code).
The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.
AV
1
2
3
4
7
V-AUX
5
6
1
2
3
USB
NET
MULTI
AUDIO
4
Controlling the remote control to operate various functions
d
Selecting input source connected to DVD
player
DOCK
Keys connecting external
components
Default remote control code
settings
HDMI OUT
TUNER
FM
PHONO
AM
PRESET
INFO
TUNING
DVD player
MEMORY
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
Playback/Stop
1
2
3
4
BD/DVD
TV
CD
RADIO
CD player
OPTION
VOLUME
ENTER
k Selecting input source connected to CD
player
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
l
DVD player
1
2
3
4
5
6
7
8
9
0
10
m
Playback/Stop
ENT
INPUT
TV VOL
The following remote control codes are assigned to input
sources at factory default settings. For a complete list of
available remote control codes, refer to “Remote Control
Code Search” in the CD-ROM.
STRAIGHT PURE DIRECT
SCENE
ON SCREEN
The remote control keys for controlling external
components are available only when the external
components have corresponding control keys.
TV CH
n
CD player
cSOURCE A
Switches an external component on and off.
kCursor, kENTER, kRETURN
Operates the menus of external components.
c SOURCE A
d Input selector
k Cursor B / C / D / E
k ENTER
k RETURN
k DISPLAY
l External component
Category
Manufacturer
Remote
control code
AV1
Blu-ray player/
recorder
Yamaha
2064
AV2
—
—
—
kDISPLAY
Switches an external component display.
AV3
—
—
—
AV4
—
—
—
lExternal component operation keys
Functions as a recording or playback key of an external
component, or a menu display key.
AV5
—
—
—
AV6
—
—
—
AV7
—
—
—
mNumeric keys
Functions as numeric keys of an external component.
V-AUX
—
—
—
AUDIO1
—
—
—
nTV control keys J1
AUDIO2
CD player
Yamaha
5095
AUDIO3
—
—
—
AUDIO4
—
—
—
USB
—
—
—
MUTE
pSOURCE/RECEIVER glows orange when
operation of this unit is enabled.
pSOURCE/RECEIVER glows green when
operation of an external component is enabled.
Control
area
nINPUT
Switches video inputs of TV.
nMUTE
Mutes TV volume temporarily.
nTV VOL +/-
Controls the volume of TV.
NET
—
—
—
nTV CH +/-
Switches TV channels.
MULTI
—
—
—
nA
Turns on and off TV.
DOCK
—
—
—
TUNER
—
—
—
PHONO
—
—
—
operation keys
l TOP MENU
l POP-UP MENU
m Numeric keys
n TV control keys
p SOURCE/RECEIVER
J 1 : When remote control codes for external components are
registered with dInput selector or nA (nTV control
keys), the following operations are possible.
• When a TV remote control code is registered with dInput
selector, the kCursor, kDISPLAY, lTOP MENU,
lPOP-UP MENU, mNumeric keys and nTV control
keys can be used to control the TV selected with dInput
selector.
• When a remote control code for a device other than a TV is
registered with dInput selector, keys including
the kCursor, kDISPLAY, lTOP MENU,
lPOP-UP MENU and mNumeric keys can be used to
control external components, and the nTV control keys can
be used to control the TV registered with nA.
• When a TV remote control code is registered with nA, only
nTV control keys can be used to control the TV.
En
107
SETUP
MAIN
Controlling the remote control to operate various functions
ZONE 2
CODE SET
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
o
p
Registering remote control codes
d for external component operations
USB
NET
MULTI
4
DOCK
HDMI OUT
TUNER
FM
PHONO
Press oCODE SET using a pointed object
such as the tip of a ballpoint pen.
ZONE 2
6
0
4
Once the remote control code is registered successfully
pSOURCE/RECEIVER will blink twice.
CODE SET
SOURCE RECEIVER
AV
PRESET
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
TUNING
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
i
OPTION
VOLUME
ENTER
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
m
ENT
TV
INPUT
TV VOL
Enter a remote control code “2064” using
mNumeric keys. J2
2
MAIN
AM
RETURN
4
blinks twice
The following section describes how to register remote
control code using an example of the registration of the
remote control codes of a Yamaha BD player connected
to AV2 jack.
AUDIO
3
2
TV CH
MUTE
n
• Perform each of the following steps within 1 minute.
Settings will be automatically stopped if more than 1
minute passes since the last operation. To reset, repeat
from step 2.
• Remote control code of an external component cannot
be set from the name or model number of a unit. Use
“Remote Control Code Search” in the CD-ROM to
search the available remote control codes from the
category or manufacturer of external components.
• If multiple remote control codes exist, first set the first
code in the list, if it does not work then try the other
codes.
1
Use “Remote Control Code Search” in the CDROM to search the available remote control
codes from the category or manufacturer of
external components.
“2064” can be used for a Yamaha BD player.
1
2
3
4
Registration successful: blinks twice
Registration failed: blinks 6 times
3
Press dAV2 to switch the input source to
AV2. J1
MAIN
Perform the following steps to register the selected
input source here to the remote control code.
ZONE 2
CODE SET
SOURCE RECEIVER
AV
1
2
3
4
• If the registration fails, repeat from step 2.
• In case of an external component with multiple remote
control codes, the other remote control codes may be
supported. Repeat from step 2 with the other remote
control codes.
5
To switch between BD player linked to
scene selections, press iSCENE and at the
same time press dAV2 and hold it for
approximately 3 seconds.
Then you can operate the external components by
switching the input source to AV2, or selecting AV2 in
the registered scene.
d AV2
i SCENE
m Numeric keys
n TV control keys
nA
o CODE SET
p SOURCE/RECEIVER
Same steps for operating other external components,
press iSCENE and at the same time press the input
source key selected in step 3 and hold it for
approximately 3 seconds.
J 1 : To control a TV that is not the input source, press nA (nTV
control keys) in step 3.
J 2 : To control a TV that is not the input source, enter the TV remote
control code in step 4.
En
108
SETUP
MAIN
Controlling the remote control to operate various functions
ZONE 2
CODE SET
SOURCE RECEIVER
o
p
Resetting all remote control codes
AV
1
2
3
4
5
6
7
V-AUX
1
2
Resetting all remote control codes for external
components to the initial factory settings.
AUDIO
USB
NET
3
MULTI
Perform each of the following steps within 1 minute.
Settings will be automatically stopped if more than 1
minute passes since the last operation. To reset, repeat
from step 2.
DOCK
PHONO
FM
AM
INFO
MEMORY
PRESET
Enter “9981” using mNumeric keys.
9
4
HDMI OUT
TUNER
3
TUNING
8
9
1
Once the remote control code is reset successfully
pSOURCE/RECEIVER will blink twice.
Reset successful: blinks twice
Reset failed: blinks 6 times
ENHANCER SUR. DECODE
MOVIE
MUSIC
SLEEP
PARTY
1
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
Press oCODE SET using a pointed object
such as the tip of a ballpoint pen.
MAIN
CODE SET
SOURCE RECEIVER
blinks twice
AV
1
ON SCREEN
ZONE 2
2
3
4
OPTION
MAIN
RETURN
ZONE 2
CODE SET
VOLUME
ENTER
If setup fails, repeat from step 1.
SOURCE RECEIVER
DISPLAY
AV
TOP
MENU
POP-UP
MENU
MUTE
1
2
3
4
REC
1
2
3
4
5
6
7
8
9
0
10
m
2
Press pSOURCE/RECEIVER on the remote
control.
ENT
INPUT
MUTE
m Numeric keys
o CODE SET
p SOURCE/RECEIVER
En
109
SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.
Displaying/Setting the Advanced Setup
menu
3
Press PROGRAM l / h repeatedly to select the item
to be set from the following items.
Setting the impedance of speakers
In the Advanced Setup menu, you can set the following settings.
1
2
Switch this unit to the standby mode.
Press MAIN ZONE A while pressing and holding
STRAIGHT on the front panel.
Release STRAIGHT when “ADVANCED SETUP” is displayed
on the front panel display.
After a few seconds, the top menu items are displayed.
MAIN ZONE A
STRAIGHT
PROGRAM l / h
SPEAKER IMP.
Sets the impedance of speakers.
REMOTE SENSOR
Activate or deactivate the signal-receiving capability
of the remote control sensor.
REMOTE CON AMP
Changes the remote control ID of a receiver.
TV FORMAT
Specifies the TV’s color encoding format.
MONITOR CHECK
Removes the up-scaling limitation on HDMI video
output.
RECOV./BACKUP
Save and restore the settings of this unit.
INITIALIZE
Initializes various settings for this unit.
FIRM UPDATE
Update the firmware of this unit.
VERSION
Check the version of firmware currently installed on
this unit.
4
5
SPEAKERIMP.
8MIN
Changes the unit settings depending on the impedance of the
speakers connected. J1
6MIN
Select the impedance when 6 Ω speakers are
connected.
8MIN (Default)
Select the impedance when speakers above 8 Ω are
connected.
Press STRAIGHT repeatedly to select the value you
want to change.
Switch this unit to the standby mode, and then
switch it on again.
The settings become effective and the unit is powered on.
J 1 : For detailed procedures of speaker impedance settings, refer to “Changing
speaker impedance” (☞p. 20).
En
110
SETUP
MAIN
Extended functionality that can be configured as needed (Advanced Setup menu)
ZONE 2
CODE SET
SOURCE RECEIVER
o
p
Remote sensor
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
AUDIO
4
DOCK
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON (Default)
Activate the signal-receiving capability of
the remote control sensor
OFF
Deactivate the signal-receiving capability
of the remote control sensor
“ON” is recommended in most cases.
OPTION
VOLUME
ENTER
RETURN
REMOTECONAMP
ID1
TUNING
ENHANCER SUR. DECODE
ON SCREEN
Activate or deactivate the signal-receiving capability of
the remote control sensor on the front panel of this unit.
HDMI OUT
TUNER
REMOTESENSOR
ON
Avoiding crossing remote control
signals when using multiple
Yamaha receivers
The remote control of the unit can only receive signals
from a receiver which has an identical ID (remote
control ID). When using multiple Yamaha AV receivers,
you can set each remote control with a unique remote
control ID for its corresponding receiver.
On the contrary, if you are setting the same remote
control ID for all receivers, you can use one remote
control to operate 2 receivers.
DISPLAY
TOP
MENU
POP-UP
MENU
ID1 (Default)
Receives the remote control signals set in
ID1.
ID2
Receives the remote control signals set in
ID2.
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
■ To change the remote control ID
Perform each of the following steps within
1 minute. Settings will be automatically stopped if
more than 1 minute passes since the last operation.
To reset, repeat from step 1.
1
2
3
Press oCODE SET using a pointed
object such as the tip of a ballpoint pen.
Press pSOURCE/RECEIVER.
Enter the desired remote control ID code.
To switch to ID1:
Enter “5019” using mNumeric keys.
To switch to ID2:
Enter “5020” using mNumeric keys.
Once the remote control code is registered
successfully pSOURCE/RECEIVER will blink
twice.
m
ENT
INPUT
MUTE
ID1 is set for both remote control and receiver by
default. To avoid crossing remote control, change the
remote control ID for both remote control and
receiver.
Registration successful: blinks twice
Registration failed: blinks 6 times
MAIN
ZONE 2
CODE SET
SOURCE RECEIVER
AV
1
m Numeric keys
o CODE SET
p SOURCE/RECEIVER
2
3
4
• If setup fails, repeat from step 1.
• Returns to ID1 after the remote control code is
initialized (☞p. 109).
En
111
SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
Changing TV format
Removing HDMI video output up-scaling
limits
RECOV./BACKUP
BACKUP
Save and restore the settings of this unit.
1
Press STRAIGHT repeatedly to select “BACKUP” or
“RECOVERY” and press INFO on the front panel.
SKIP
This unit ignores the TV’s support capability and
transmits input video signals to the TV.
DSP PARAM
Initializes all parameters for the sound programs.
VIDEO
Resets video conversion settings (resolution/aspect
ratio) in the Setup menu.
NETWORK
Resets the settings of network such as IP address or
the account of vTuner.
ALL
Resets this unit to default factory settings.
CANCEL (Default)
Does not initialize.
STRAIGHT
Removes the up-scaling limitation on video resolution when this
unit and a TV are connected via HDMI jacks.
If a resolution supported by the monitor cannot be detected when
configuring the up-scaling settings, this setting will remove the
output limitation.
Video output signals of a resolution not supported by
the TV will not be transmitted.
INITIALIZE
CANCEL
Initializes various settings stored in this unit and sets it back to
default.
Select the items to be initialized from the following.
MONITORCHECK
YES
YES (Default)
Initializing various settings for this unit
TVFORMAT
NTSC
Change the color encoding format of OSD to PAL or NTSC
(default), to match the format used by the TV connected via the
HDMI OUT 1-2 or VIDEO (MONITOR OUT) jack.
Recovery and backup of the system
settings
When an option other than CANCEL is selected, the applicable
default settings will be restored when the unit switches to standby
mode.
INFO
RECOVERY
Restores settings for this unit that have been saved.
BACKUP
Saves the current settings of this unit.
2
Press INFO to execute the “BACKUP” or
“RECOVERY.” J1
“RECOVERY” cannot be selected if settings have not be
previously saved.
J 1 : After performing “RECOVERY,” turn off this unit.
En
112
SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
Firmware update
Firmware version
FIRMUPDATE
USB
Update the firmware of this unit. For details on updating the
firmware, refer to information supplied with updates.
When this unit detects the latest firmware over a network, the
message indicating that the firmware is released is displayed in the
System information (☞p. 106).
1
Press STRAIGHT repeatedly to select “USB” or
“NETWORK.”
VERSION
xx.xxx
Check the version of firmware currently installed on this unit.
About the latest firmware
When installing the latest firmware, the new functions or fix of
failure may be served.
• The latest firmware can be downloaded from our website.
• While displaying the ON SCREEN menu or “System” from
Information menu, the information on the latest firmware is
displayed via a network.
STRAIGHT
INFO
USB (Default)
Updates the firmware of this unit using a USB flash
drive.
NETWORK
Updates the firmware of this unit via network.
2
Press INFO to start update with the selected option.
• Do not use this feature unless the firmware must be updated.
• Be sure to read the information supplied with updates before
updating firmware.
En
113
SETUP
Using the HDMI Control function
This unit supports the HDMI Control function, which allows you to
operate external components via HDMI. If devices that support
HDMI Control (e.g., Panasonic VIERA Link-compatible TVs,
DVD/Blu-ray Disc players, etc.) are connected J1, remote
controls for those devices can be used to perform the following
operations:
– Power synchronization (on/standby)
– Volume control, including Mute
– Changing the volume of the audio output signal device (either the
TV or this unit)
TV
Control signal
(such as volume control)
1
2
3
Connect the TV that supports the HDMI Control
function to this unit’s HDMI output jack.
4
Set the TV and this unit’s HDMI Control function to
“On.”
Remote control of TV
This unit
Confirm that the input source for the DVD/BD players
has been selected. If a different input source has been
selected, change it manually.
Turn on the TV and this unit.
TV and DVD/BD
player
Confirm that the video signal from the player is being
properly received by the TV.
Refer to the TV’s instruction manual on how to operate external
components.
This unit
TV and DVD/BD
player
NOTE
The following is an example of how to connect this unit, a TV,
and a DVD/BD player. Follow the instructions in your TV and
DVD/BD player manuals, as well as the ones written below.
– Set the TV’s HDMI Control function to “On”
– Follow the AV amplifier connection instructions, and connect
this unit to the TV
Confirm that “HDMI Control” is set to “On” (☞p. 97)
and select the HDMI OUT jack connected to the TV
in “Control Select” (☞p. 97). J2
Check the instruction manuals for those devices.
5
Turn the TV off.
6
Turn the TV on.
7
Change the TV’s input setting to the input jack that
is connected to this unit (e.g., AV1).
This unit
If DVD/BD player that supports the HDMI Control
function are connected to this unit, turn them on.
Connect the DVD/BD player that supports the HDMI
Control function to this unit’s HDMI input jack.
HDMI connection
HDMI
8
Other synchronized HDMI Control devices are turned off with the
TV. If they are not synchronized, unplug the AC power cord of the
TV.
Confirm that this unit has turned on in conjunction with the TV. If
it is still off, turn it on manually.
Operations 1-8 will not be required more than twice. However,
perform operations 1-8 again when switching the HDMI OUT
jack using Control Select.
9
Confirm that this unit is properly synchronized with
the TV through the following operations by using the
TV remote control.
• Power On/Off
• Volume Control
• Switching between audio output devices
If this unit is not synchronized to the TV’s power operations,
check that the HDMI Control function is set to “On” for both
devices.
If they will not properly synchronize, unplugging and replugging the AC power cords of this unit and the TV may solve
the problem.
J 1 : We recommend that you use TVs and DVD/BD players from the same
manufacturer whenever possible.
J 2 : The default setting for the HDMI Control function is “Off.”
En
114
SETUP
MAIN
Using the HDMI Control function
ZONE 2
CODE SET
SOURCE RECEIVER
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
AUDIO
4
DOCK
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
■ Switching the input source on this
To use other jacks to input audio signals from TV, carry
out the following procedure.
When the HDMI Control (☞p. 114) is operating
properly, the input source of this unit is automatically
changed to match operations carried out on the TV.
When the TV is connected with HDMI OUT 1, the
default input jack is AUDIO1. If the AUDIO1 optical
digital jack is connected to the TV’s audio output jack,
then you can enjoy TV sound through this unit right
away.
1
2
unit automatically when listening
to TV audio
AV
TUNING
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
SCENE
DOCK
1
2
3
4
BD/DVD
TV
CD
RADIO
j
NETWORK
HDMI OUT
2
1
Audio output
(Optical)
ARC
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
AV OUT
SELECTABLE
Connect this unit and the TV with an HDMI
cable.
OPTION
TV output jack
Input jack
Optical digital audio output
AUDIO1
COMPONEN
Y
PB
PR
Coaxial digital audio output
AUDIO2
Analog stereo output
AUDIO1, AUDIO2, AUDIO3, or
AUDIO4
AV 1
A
AV 2
B
AUDIO 1
(2 TV)
RETURN
k
TOP
MENU
POP-UP
MENU
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH
(3 CD)
O
DISPLAY
Press kCursor D / E repeatedly to select
“HDMI” and press kENTER.
The input jacks listed below are available to input TV’s
audio signals. Use the same jack type as used for the
TV.
(1 BD/DVD)
MON.OUT/ZONE OUT
OPTICAL
VOLUME
5
Connect TV’s audio output to this unit.
GND
ENTER
Press kCursor B / C repeatedly to select
“Setup” and press kENTER.
AV 1
ARC
PHONO
ON SCREEN
Press jON SCREEN. J1
3
4
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
TV
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
O
Available input jacks
ANTENNA
MUTE
FM (4 RADIO) GND AM
75
REC
DOCK
NETWORK
ARC
AV 1
AV 2
AV 3
AV 4
(1 BD/DVD)
AV OUT
HDMI
HDMI OUT
2
1
SELECTABLE
AV 1
AV 2
AV 3
AV 4
AV 5
(1 BD/DVD)
ARC
COMPONENT VIDEO
MON.OUT/ZONE OUT
Y
PB
PR
Y
AV 3
PB
C
PR
AV 1
1
2
3
5
6
7
9
0
10
4
8
ENT
INPUT
MUTE
A
PHONO
When the TV is connected with HDMI OUT 2, the
default input jack is AUDIO3. If the AUDIO3 optical
digital jack is connected to the TV’s audio output jack,
then you can enjoy TV sound through this unit right
away.
Y
GND
MONITOR OUT/ZONE OUT
PB
PR
RE
IN
AV 2
B
D
AV 4
AUDIO 1
(2 TV)
Ԙ COAXIAL ԙ COAXIAL Ԛ OPTICAL ԛ OPTICAL
AUDIO 2
AUDIO 3
AUDIO 4
MULTI CH INPUT
(3 CD)
Ԝ OPTICAL ԝ COAXIAL
FRONT
SURROUND
SUR. BACK
CENTER
SUBWOOFER
ZONE OUT
ZONE 2
PRE OUT
(SINGLE)
SURROUND
SUR. BACK
FRONT
SPEAKERS
SURROUND
SURROUND BACK/
BI-AMP
C
ANTENNA
FM (4 RADIO) GND AM
75
SINGLE
Continues to the
next page
j ON SCREEN
k Cursor B / C / D / E
k ENTER
J 1 : Refer to the “Setting various functions (Setup menu)” (☞p. 89)
for details on the Setup menu.
En
115
SETUP
MAIN
Using the HDMI Control function
ZONE 2
CODE SET
SOURCE RECEIVER
6
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
Make sure that “HDMI Control” is “On”
When “HDMI Control” is set to “Off,” press
kENTER and kCursor B / C to set to “On.”
AUDIO
4
7
8
DOCK
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
TUNING
ENHANCER SUR. DECODE
1
2
3
4
BD/DVD
TV
CD
RADIO
VOLUME
ENTER
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
1
j
OPTION
RETURN
2
Use kCursor B / C to select the HDMI OUT
jack connected to the TV and press
kENTER.
STRAIGHT PURE DIRECT
SCENE
ON SCREEN
Press kCursor B / C to select “Control
Select” and press kENTER.
3
5
6
7
9
0
10
4
k
Press kCursor B / C to select “TV Audio
Input” and press kENTER.
9
10
11
■ Single HDMI cable input to TV
audio with Audio Return Channel
function
When using a TV that supports HDMI functions and
Audio Return Channel function, audio/video output
from this unit to the TV or audio output from the TV to
this unit can be transmitted through a single HDMI cable
(Audio Return Channel function). Audio signals
transmitted from the TV to this unit can be assigned to
any input source.
1
4
Press kCursor D / E repeatedly to select
“HDMI” and press kENTER.
TV
HDMI
HDMI
If the TV hereafter transmits audio output signals,
this unit will automatically switch to the input
source chosen in step 10.
Press kCursor B / C repeatedly to select
“Setup” and press kENTER.
Connect this unit and the TV with an HDMI
cable.
Use kCursor B / C to select the input
jack connected in step 2.
Press jON SCREEN when you have
finished changing the settings.
Press jON SCREEN. J1
2
3
Video / Audio
output
TV audio
output
HDMI
NETWORK
HDMI
HDMI OUT
AV 1
ARC
8
AV 2
AV 3
AV 4
AV OUT
SELECTABLE
AV 3
AV 4
COMPONENT VIDEO
MON.OUT/ZONE OUT
ENT
AV 2
(1 BD/DVD)
ARC
Y
PB
PR
Y
AV 3
PB
C
PR
AV 1
A
Y
INPUT
MONITOR OUT/ZONE
PB
AV 2
B
D
AV 4
AUDIO 1
(2 TV)
MUTE
AUDIO 2
(3 CD)
AUDIO 3
AUDIO 4
MULTI CH INPUT
CENTER
ZONE OUT
Continues to the
next page
j ON SCREEN
k Cursor B / C / D / E
k ENTER
J 1 : Refer to the “Setting various functions (Setup menu)” (☞p. 89)
for details on the Setup menu.
En
116
SETUP
MAIN
Using the HDMI Control function
ZONE 2
CODE SET
SOURCE RECEIVER
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
5
Make sure that “HDMI Control” is “On.”
6
7
Press kCursor B / C to select “Control
Select” and press kENTER.
8
9
Press kCursor B / C to select “TV Audio
Input” and press kENTER.
When “HDMI Control” is set to “Off,” press
kENTER and kCursor B / C to set to “On.”
AUDIO
4
DOCK
HDMI OUT
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
TUNING
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
SCENE
1
2
3
4
BD/DVD
TV
CD
RADIO
ON SCREEN
Use kCursor B / C to select the HDMI OUT
jack connected to the TV and press
kENTER.
j
OPTION
VOLUME
ENTER
DISPLAY
TOP
MENU
POP-UP
MENU
2
3
5
6
7
9
0
10
Use kCursor B / C to select the input
source to which the HDMI audio signals will
be assigned, and press kRETURN.
MUTE
REC
1
k
10
Press kCursor B / C to select “ARC
(Audio Return Channel)” and press
kENTER. J1
11
Press kCursor C to select “On.”
12
Press jON SCREEN to close the Setup
menu.
4
8
ENT
The Audio Return Channel function will turn on.
INPUT
MUTE
j ON SCREEN
k Cursor B / C
k ENTER
k RETURN
If the TV hereafter transmits audio output signals,
this unit will automatically switch to the input
source chosen in step 9.
J 1 : While the Audio Return Channel function is on, the jack selected
for the input source cannot be used.
En
117
SETUP
Enjoying the contents in another room
This unit allows you to configure a multi-zone audio system. The Zone2 feature allows you to set this unit to reproduce separate input sources in the main zone and the second zone (Zone2). You can
control this unit from the second zone using the supplied remote control.
From the ZONE2 OUT jacks
■ When using the external amplifier
An amplifier located in the second zone can be connected to this unit as shown below.
Audio input
Amplifier
Main zone
AUDIO
HDMI
L
AV 3
Second zone
(Zone2)
RS-232C
AV 4
AV 5
PB
C
TRIGGER
OUT
PR
MONITOR OUT/ZONE OUT
Y
PB
PR
From the REMOTE OUT jack
1
REMOTE
IN
OUT
2
Remote control
D
Power amplifier
This unit
AV 7
R
DVD player (etc.)
Infrared signal
emitter
AV 6
ENTER
+12V 0.1A MAX.
ZONE OUT
PRE OUT
(SINGLE)
1
L
2
Infrared signal
receiver
Second Zone
(Zone2)
R
BWOOFER
ZONE 2
SURROUND
FRONT
SUR. BACK
SUBWOOFER
CENTER
SPEAKERS
UND
SURROUND BACK/
BI-AMP
CENTER
FRONT
ZONE2/
F.PRESENCE
AC IN
To the REMOTE IN jack
SINGLE
Only analog signal can be sent to Zone2. If you want to output sound from Zone2, connect an
external component to AV1-4, AUDIO1-4 or V-AUX by analog connection. For example, if you
want to output sound from an HDMI DVD player in Zone2, you must connect the component to this
unit by both HDMI and analog connections.
Connecting Zone2
EXTRA SP
To avoid unexpected noise, DO NOT USE the Zone2 feature with CDs encoded in DTS.
■ When using the internal amplifier of this unit
Connect the speakers in the second zone to the EXTRA SP jacks directly (☞p. 20).
You need the following additional equipment to use the multi-zone functions of this unit:
• An infrared signal receiver in the second zone.
• An infrared signal emitter in the main zone. This emitter transmits infrared signals from the remote control
to a CD player or a DVD player, etc. in the main zone via the infrared signal receiver in the second zone.
• An amplifier and speakers in the second zone.
• A TV in the second zone.
Since there are many possible ways to connect and use this unit in a multi-zone configuration, we
recommend that you consult with your nearest authorized Yamaha dealer or service center about the
Zone2 connections that best meet your requirements.
En
118
SETUP
Enjoying the contents in another room
■ Connecting zone video monitors
■ Controlling this unit with the remote control in another room
Connect the video monitor(s) in Zone2 to MONITOR OUT/ZONE OUT jacks. If you connect the
multiple zone video monitors to these jacks, the video monitors play back the selected input source for
the Zone2.
This unit is equipped with REMOTE IN and REMOTE OUT jacks. You can use these jacks to control
this unit and other components from Zone2 (☞p. 34).
To assign the MONITOR OUT/ZONE OUT jacks to the main zone or Zone2, configure “Monitor
Out Assign” (☞p. 100).
Some Yamaha models can be directly connected to the REMOTE jacks of this unit. These models
may not require an infrared signal emitter. Up to 6 Yamaha components can be connected as shown
below.
REMOTE
IN
REMOTE
OUT
IN
REMOTE
OUT
Source component
Infrared signal
receiver
MON.OUT/ZONE OUT
Y
This unit
Yamaha
component
MONITOR OUT/ZONE OUT
PB
PR
This unit
Video in
V
or
Y
PB
PR
Component video in
Zone2
Video monitor
En
119
SETUP
MAIN
Enjoying the contents in another room
ZONE 2
CODE SET
SOURCE RECEIVER
b
q
Controlling Zone2
AV
1
2
3
4
5
6
7
V-AUX
1
2
3
USB
NET
MULTI
AUDIO
4
The remote control can be used to select and control
Zone2 devices. The available operations are as follows:
d • Selecting the input source of Zone2.
• Tuning into FM or AM when “TUNER” is selected as the
input source of Zone2.
• Adjust the volume of Zone2 devices (when connected via
the built-in amplifier).
DOCK
HDMI OUT
TUNER
FM
PHONO
AM
PRESET
TUNING
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
4
BD/DVD
TV
CD
RADIO
ENHANCER SUR. DECODE
STRAIGHT PURE DIRECT
SCENE
ON SCREEN
RETURN
VOLUME
DISPLAY
TOP
MENU
POP-UP
MENU
MUTE
REC
1
2
3
4
5
6
7
8
9
0
10
INPUT
■ Activating the Zone2 operation
mode
Set bMAIN/ZONE2 to ZONE2 before attempting to
i use the remote control to control Zone2 devices.
■ Operating Zone2
OPTION
ENTER
g
h
ENT
To enable and disable the audio output to Zone2
Press qRECEIVER A.
To select an input source for Zone2
Press dInput selector.
Only the following sources are available for
the Zone2.
AV1-4 (only analog audio input), V-AUX (only
analog audio input), AUDIO1-4 (only analog audio
input), PHONO, USB, NET, DOCK, TUNER
MUTE
b MAIN/ZONE2
d Input selector
g SLEEP
h PARTY
i SCENE
q RECEIVER A
To use SCENE function for Zone2
Press and hold iSCENE key for about 3 seconds to
register the current setting to the scene.
Press iSCENE key to load the registered setting.
The following settings can be registered for
each scene of the Zone2.
Input, Master Volume, Tone Control
To enable the sleep timer for Zone2
Automatically switch the Zone2 device to standby mode
after a specified period of time has elapsed (sleep timer).
Press gSLEEP repeatedly to specify a time for the
sleep timer function.
120min.
Off
90min.
30min.
frequency sound (Tone Control)
Press ZONE CONTROLS on the front panel.
Press TONE/BALANCE on the front panel
repeatedly to select “Treble” or “Bass.”
Press PROGRAM l / h to adjust the output
level in the applicable frequency range.
Adjustable range
-10.0 dB to +10.0 dB
Adjustment
increments
2.0 dB
Use this feature to play main zone sources in Zone2
simultaneously. This feature is useful when you want to
play back main sources as background music in a home
party, etc. When using the party mode, set “Party Mode
Set” to “Enable” (☞p. 100).
60min.
■ Adjusting Zone2 high-/low-
1
2
3
Enjoying the music in all rooms
Press hPARTY to turn on or off the party mode.
“Party Mode On” or “Party Mode Off” appears on the
front panel display or the TV screen.
While this unit is in the party mode, the PARTY
indicators turn on in the front panel display.
• Input audio signals are mixed down to 2ch Stereo and
output at the analog ZONE2 OUT jacks.
• Party mode can be turned on only when the power of
main zone is turned on.
• Party mode automatically turns off when the power of
main zone is turned off.
The display returns to the previous display soon after the
key is released.
■ Adjusting Zone2 front speaker
balance
1
2
3
Press ZONE CONTROLS on the front panel.
Press TONE/BALANCE on the front panel
repeatedly to select “Balance.”
Press PROGRAM l / h to adjust balance.
The display returns to the previous display soon after
the key is released.
En
120
APPENDIX
Troubleshooting
Refer to the table below when this unit does not function properly.
If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service
center.
General
Problem
Cause
Remedy
See
page
The power will not
turn on.
The protection circuitry operated
3 times consecutively.
As a safety precaution, when the protection
circuitry operates 3 times consecutively, the
capability to turn on the power is disabled.
Contact your nearest Yamaha dealer or
service center to request repair.
—
The unit enters
standby mode soon
after the power is
turned on.
The power cable is not completely
inserted.
Connect the power cable properly to an AC
wall outlet.
—
(When this unit is turned back on
and “CHECK SP WIRES!” is
displayed.) The protection
circuitry has been activated
because this unit was turned on
while a speaker cable was shorted.
Make sure that all speaker cables between
this unit and speakers are connected
properly.
21
The internal microcomputer is
hung-up due to an external electric
shock (such as lightning or
excessive static electricity) or by a
drop in power supply voltage.
Disconnect the power cable from the AC
wall outlet, wait about 30 seconds and then
plug it in again.
—
The batteries in the remote control
may have lost their charge.
Replace all batteries.
The protection circuitry has been
activated because of a short circuit,
etc.
This unit cannot be
turned off or does
not work properly.
The unit enters
standby mode.
The sleep timer has turned off the
unit.
Problem
Cause
Remedy
See
page
After display of a
countdown on the
front panel, the unit
goes into standby
mode.
If you do not use take any action,
the Auto Power Down function
operates.
Turn on the unit, and play the source again.
—
In the Setup menu “Auto Power Down”
(“Function” → “Auto Power Down”),
increase the time until switching to standby
mode, or turn off the Auto Power Down
function.
102
No sound.
Incorrect input or output cable
connections.
Connect the cables properly. If the problem
persists, the cables may be defective.
28
Speaker connections are not
secure.
Secure the connections.
21
The HDMI components connected
to the unit do not support the
HDCP copy protection standards.
Connect HDMI components that support the
HDCP copy protection standards.
—
The audio input into the device is
set to playback through the TV.
In the Setup menu, set the “Amp” of “Audio
Output” (“HDMI” → “Audio Output” →
“Amp”) to “On.”
98
No appropriate input source has
been selected.
Select an appropriate input source with
Input selector.
45
12
—
—
The volume is turned down or
muted.
Turn up the volume.
Check that the speaker with an impedance
of at least 6 Ω.
20
Use an input source that has signals that can
be reproduced on this unit.
Check that the speaker wires are not
touching each other, then turn the unit back
on.
—
Signals that this unit cannot
reproduce are being input from a
source component, such as a CDROM.
—
Check that the speaker impedance settings
are correct.
Turn on the unit, and play the source again.
—
En
121
APPENDIX
Troubleshooting
Problem
No picture.
No sound is output
from a specific
speaker.
Cause
Remedy
See
page
The video signal output from this
unit is not supported by a monitor
connected to this unit via the
HDMI OUT 1-2 jacks.
Displays the Advanced Setup menu and
select “VIDEO” in “INITIALIZE” to reset
the video parameters.
112
Displays the Advanced Setup menu and set
“MONITOR CHECK” to “YES.”
112
An appropriate video input is not
selected on the TV.
Select an appropriate video input on the TV.
—
The speaker is malfunctioning.
Check the Speaker indicators on
the front panel display. If the
corresponding indicator lights up,
connect another speaker and check
if sound is output.
If sound is not output, the unit may be
malfunctioning.
11
The playback component or
speakers are not connected
properly.
Connect the cables properly. If the problem
persists, the cables may be defective.
21, 28
Output from that speaker is
disabled.
Check the Speaker indicators on the front
panel display. If the corresponding indicator
is turned off, try the following.
1) Change to a different input source.
2) With the selected sound program, sound
is not output from that speaker. Select
another sound program.
3) “None” may have been selected for that
speaker on this unit. Display “Speaker” in
the Setup menu, and set respective
parameters to enable output from that
speaker (“Speaker” → “Manual Setup” →
“Configuration”).
11, 91
The volume of that speaker is set
to the minimum in “Speaker” in
the Setup menu.
Display “Speaker” in the Setup menu and
adjust the volume (“Speaker” → “Manual
Setup” → “Level”).
93
(If hardly any sound comes from
one channel)
Speaker output balance is not set
correctly.
Balance the volume of each speaker from
“Level” in the Setup menu (“Speaker” →
“Manual Setup” → “Level”).
93
Sound may not be output from
certain channels, depending on the
input source or sound program.
Try another sound program.
48
Problem
Cause
See
page
Remedy
Only the center
speaker outputs
substantial sound.
When a monaural source sound
program is applied, for some
surround decoders, sound from all
channels is output from the center
speaker.
Try another sound program.
48
No sound is heard
from the presence
speakers.
This unit is in straight decoding
mode.
Press STRAIGHT to exit straight decoding
mode.
49
Sound may not be output from
certain channels depending on
input sources or sound programs.
Try another sound program.
48
No sound is heard
from the surround
speakers.
Sound may not be output from
certain channels depending on
input sources or sound programs.
Try another sound program.
48
No sound is heard
from the surround
back speakers.
“Extended Surround” in the
Option menu is set to “Off,” or an
input signal does not contain a
surround back flag with “Extended
Surround” set to “Auto.”
Set “Extended Surround” other than “Off”
or “Auto.”
57
No sound is heard
from the subwoofer.
A subwoofer is not connected, or it
is inactive.
Check that a subwoofer is connected
correctly, and from the Setup menu
“Subwoofer” (“Speaker” → “Manual
Setup” → “Configuration” →
“Subwoofer”), set the subwoofer to “Use.”
22, 92
The subwoofer is turned off.
Turn the subwoofer power on.
If the subwoofer includes an Auto Power
Off function, then lower the Auto Power Off
sensitivity settings.
—
The source does not contain LFE
(☞p. 129) or low frequency
signals.
The audio input
sources cannot be
played in the desired
digital audio signal
format.
The connected component is not
set to output the desired digital
audio signals.
—
Set the playback component properly
referring to its instruction manual.
En
—
122
APPENDIX
Troubleshooting
Problem
Cause
Remedy
See
page
There is noise
interference from
digital or radio
frequency
equipment.
This unit is too close to other
digital or radio frequency
equipment.
Noise/hum noise is
heard.
Incorrect cable connection.
Connect the audio cables properly.
If the problem persists, the cables may be
defective.
—
A DTS-CD is being played back.
1) When only noise is output
If a DTS bitstream signal is not properly
input to this unit, only noise is output.
Connect the playback component to this
unit by digital connection and playback the
DTS-CD. If the condition is not improved,
the problem may results from the playback
component. Consult the manufacturer of the
playback component.
2) When noise is output during playback or
skip operation
Before playing back the DTS-CD, display
the Input menu after selecting the input
source and set “Decoder Mode” to “DTS.”
—
The component connected to the
output jacks of this unit is not
turned on.
When the component connected to the
output jacks of this unit is not turned on, the
sound may be distorted, or the volume may
decreased due to the nature of AV receivers.
Turn on all components connected to this
unit.
—
“Max Volume” is set to a low
value.
Set it to a higher value.
95
The volume cannot
be increased, or the
sound is distorted.
Move this unit further away from such
equipment.
HDMI™
—
Problem
Cause
See
page
Remedy
The front panel
display HDMI
indicator is flashing.
An error with the HDMI
connection has occurred.
Try re-inserting the HDMI cable.
—
Confirm that HDMI video that is not
supported by the unit is not being input
(Information menu → “Video Signal
information”).
105
No picture or sound.
The number of components is over
the limit.
Disconnect some of the HDMI components.
—
The connected HDMI component
does not support high-bandwidth
digital copyright protection
(HDCP).
Connect an HDMI component that supports
HDCP.
—
The TV audio output is not
connected to this unit, or the
setting to match operations carried
out on TV is not set.
Connect the TV audio output to this unit,
and then select the connected input source
in “TV Audio Input” (Setup menu → HDMI
→ TV Audio Input).
98
(When using Audio Return
Channel function)
The Audio Return Channel
function is not working.
Make sure that your TV supports Audio
Return Channel.
Set the Audio Return Channel function to
on (Setup menu → HDMI → ARC (Audio
Return Channel)).
97
(When using HDMI
Control function)
TV sound is not
output from this unit
when operating the
remote control of the
TV.
En
123
APPENDIX
Troubleshooting
Tuner (FM/AM)
AM
FM
Problem
FM stereo reception
is noisy.
Cause
You are too far from the station
transmitter, or the input from the
antenna is weak.
Remedy
See
page
Check the antenna connections.
37
Switch to monaural mode.
62
Replace the outdoor antenna with a more
sensitive multi-element antenna.
—
Adjust the antenna height or orientation, or
place it in a different location.
—
There is distortion,
and clear reception
cannot be obtained
even with a good FM
antenna.
There is multi-path interference.
The desired station
cannot be tuned into
with the automatic
tuning method.
You are in an area far from a
station, or input from the antenna
is weak.
Replace the outdoor antenna with a more
sensitive multi element antenna.
—
Use TUNING H / I to manually select the
station.
60
“No Presets” is
displayed.
No preset stations are registered.
Register stations you want to listen to as
preset stations before operation.
60
“Wrong Station” is
displayed.
An invalid FM/AM frequency has
been input.
Input a frequency that can be received.
—
See
page
Problem
Cause
Remedy
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is weak, or the antenna
connections are loose.
Adjust the AM loop antenna orientation.
—
Use the manual tuning method.
60
Automatic station
preset does not
work.
Automatic station preset is not
available for AM stations.
Use manual station preset.
60
Continuous
crackling and
hissing noises are
heard.
The supplied AM loop antenna is
not connected.
Connect the AM loop antenna correctly
even if you use an outdoor antenna.
37
The noises may be caused by
lightning, fluorescent lamps,
motors, thermostats, or other
electrical equipment.
It is difficult to completely eliminate noise,
but it can be reduced by installing and
properly grounding an outdoor AM antenna.
—
Buzzing and whining
noises are heard.
A TV set is being used nearby.
Move this unit away from the TV set.
—
En
124
APPENDIX
Troubleshooting
USB and Network
Problem
Remedy
See
page
Problem
Cause
“No Device” is
displayed even when
a USB device is
present.
This unit recognized the USB
storage device as an illegal device.
Turn this unit off then on again.
—
The music files and
directories in the
USB device cannot
be viewed.
The music files and directories are
placed in locations other than the
FAT area.
Place music files and directories in the FAT
area.
—
You are attempting to browse
directory hierarchies of over 8
levels or a directory with more
than 500 files.
Modify the data structure on your USB
device.
—
The IP address is not set properly.
Set the DHCP server function of the router
to ON. Alternately, perform manual
configuration according to the current
operating environment.
99
The network cable is not
connected.
Connect it properly.
35
The PC does not have Windows
Media Player installed in it.
Install Windows Media Player in the PC.
—
The music is recorded in a format
that cannot be played on this unit.
This unit cannot play music
formats other than WMA, MP3,
MPEG-4 AAC, FLAC and WAV
(PCM format). Also note that it
cannot play certain music files
even if these are recorded in the
WMA, MP3, MPEG-4 AAC,
FLAC, or WAV format.
Play music recorded in a format that this
unit is compatible with.
—
The Internet Radio
cannot be played.
Display
Connect error
The PC server/
Internet Radio does
not function
properly.
The music in the PC
server cannot be
played back.
Disconnected
No Device
Cause
See
page
Remedy
The firewall of the network device
is activated. The Internet Radio
can be played only when it passes
through the port designated by
each radio station. The port
number is variable depending on
radio station.
Check the firewall setting of the network
device.
—
Connection to the Internet is
disconnected.
Check the configuration of the network
device, and then contact the network
connection provider.
—
See
page
Cause
Remedy
There is a problem with the signal
path from your network to this
unit.
Check the connection between this unit and
the LAN port on your router or hub.
35
Make sure your router is properly connected
and turned on. Also, make sure your modem
is properly connected and turned on when
you are attempting to listen to Internet
Radio.
35
Your USB storage device or USB
portable audio player has been
disconnected from the USB port of
this unit.
Check the connection between this unit and
your USB storage device or USB portable
audio player.
—
The PC server previously
connected to this unit no longer
exists.
Connect this unit to the available PC server.
35
There is a problem with the signal
path from your USB storage
device or USB portable audio
player to this unit.
Turn off this unit and reconnect your USB
storage device or USB portable audio player
to the USB port of this unit.
36
Try resetting your USB storage device or
USB portable audio player.
—
En
125
APPENDIX
Troubleshooting
Display
Access error
Cause
Remedy
See
page
This unit cannot access your USB
storage device or USB portable
audio player.
Try another USB storage device or USB
portable audio player.
—
There is a problem with the signal
path from your USB storage
device or USB portable audio
player to this unit.
Turn off this unit and reconnect your USB
storage device or USB portable audio player
to the USB port of this unit.
36
Try resetting your USB storage device or
USB portable audio player.
—
Access denied
The PC you are attempting to
connect has denied connection.
Configure the sharing setting of Window
Media Player 11/12 and select this unit as a
device to which music contents are shared.
63
Unable to play
This unit cannot play back the
songs currently stored on your PC.
Make sure Windows Media Player is
installed on your PC.
—
Check that the songs currently stored on
your PC are playable (MP3, WMA, MPEG4 AAC, and WAV).
—
Store some other playable music files (MP3,
WMA, MPEG-4 AAC, and WAV) on your
PC.
—
Try preparing a network exclusively for use
with this unit to separate it from general
network traffic.
—
The network may be overloaded
with heavy traffic, and playback is
interrupted.
iPod™/iPhone™
Display
Loading...
Connect error
Cause
See
page
Remedy
The unit is in the process of
recognizing the connection with
your iPod/iPhone.
—
The unit is in the middle of
acquiring song lists from your
iPod/iPhone.
—
There is a problem with the signal
path from your iPod/iPhone to the
unit.
Turn off the unit and reconnect the
Universal Dock for iPod to the DOCK jack
of the unit.
70
Remove your iPod/iPhone from the
Universal Dock for iPod and then place it
back in the dock.
70
Connect an iPod/iPhone supported by the
unit.
—
Unknown iPod
The iPod/iPhone being used is not
supported by the unit.
iPod connected
Your iPod/iPhone is properly
placed in the Universal Dock for
iPod.
—
Your iPod/iPhone is properly
placed in the Wireless System for
iPod and connected with this unit
via wireless transmission.
72
List updated
The list of the contents stored on
your PC server has been updated.
—
The desired Internet Radio station
has been added to the Bookmarks
list.
—
Your iPod/iPhone is removed from
the Universal Dock for iPod.
—
Bookmark On
—
The stored Internet Radio station
has been removed from the
Bookmarks list.
—
Your iPod/iPhone is disconnected
with this unit via wireless
transmission.
Bookmark Off
USB Overloaded
Over current passes through the
connected USB device.
Disconnected
Unable to play
Turn off this unit and then disconnect the
USB device. If the message appears when
you connect the USB device again, this unit
may not compatible with the USB device.
—
The unit cannot playback the
songs currently stored on your
iPod/iPhone.
Check that songs are currently stored on
your iPod/iPhone.
En
—
126
APPENDIX
Troubleshooting
Bluetooth™
Display
Searching...
Remote control
Cause
Remedy
See
page
The Yamaha Bluetooth Wireless
Audio Receiver and the Bluetooth
component are in the process of
pairing.
—
The Yamaha Bluetooth Wireless
Audio Receiver and the Bluetooth
component are in the process of
establishing a connection.
—
Completed
The pairing is completed.
Canceled
BT connected
Disconnected
Not found
Problem
The remote control
does not work or
function properly.
Cause
See
page
Remedy
Wrong distance or angle.
The remote control will function within a
maximum range of 6 m, and no more than
30 degrees off-axis from the front panel.
—
Direct sunlight or lighting (from
an inverter type of fluorescent
lamp, strobe light, etc.) is striking
the remote control sensor of this
unit.
Adjust the lighting angle, or reposition this
unit.
—
—
The batteries are weak.
Replace all batteries.
12
The pairing is canceled.
—
The connection between the
Yamaha Bluetooth Wireless Audio
Receiver and the Bluetooth
component is established.
—
The remote control ID of the
remote control and this unit do not
match.
Match the remote control ID of this unit and
the remote control.
The power of battery is not
enough.
Replace the battery with alkaline battery.
—
The Bluetooth component is
disconnected from the Yamaha
Bluetooth Wireless Audio
Receiver.
—
The battery of
remote control runs
out immediately.
External components
cannot be controlled
using the remote
control.
The remote control code is not
correctly set.
Set the remote control code correctly using
“Remote control code search” on the CDROM.
—
Try setting another code for the same
manufacturer using “Remote control code
search” on the CD-ROM.
—
If this unit does not work when you press
Cursor B / C / D / E, do the following.
When the key does not work during DVD
disc menu operation: press the Input
selector again.
When there is no response with remote
control operation of the Option menu/Setup
menu: press SOURCE/RECEIVER (it
should glow orange) and try operating the
remote control again.
—
The Bluetooth component is not
found.
Pairing may not have been
achieved.
During pairing:
– pairing must be performed on the
Bluetooth component and this unit
simultaneously. Check if the Bluetooth
component is in pairing mode.
During connecting:
– check if the Bluetooth component is
turned on.
– check if the Bluetooth component is
within 10 m of the Yamaha Bluetooth
Wireless Audio Receiver.
—
Try pairing again.
74
Even if the remote control code is
correctly set, there are some
models that do not respond to the
remote control.
107,
111
—
En
127
APPENDIX
Glossary
Audio information
Audio and video synchronization (Lipsync)
Lip sync, an abbreviation for lip synchronization, is a technical term that
involves both a problem and a capability of maintaining audio and video
signals synchronized during post-production and transmission. Whereas the
audio and video latency requires complex end-user adjustments, HDMI
version 1.3 incorporates an automatic audio and video syncing capability
that allows devices to perform this synchronization automatically and
accurately without user interaction.
Bi-amplification connection (Bi-amp)
Dolby Digital Plus
DTS 96/24
Dolby Digital Plus is an advanced audio technology developed for highdefinition programming and media including HD broadcasts, and Blu-ray
Disc. Selected as an optional audio standard for Blu-ray Disc, this
technology delivers multichannel sound with discrete channel output.
Supporting bitrates up to 6.0 Mbps, Dolby Digital Plus can carry up to 7.1
discreet audio channels simultaneously. Supported by HDMI version 1.3
and designed for the optical disc players and AV receivers/amplifiers of the
future, Dolby Digital Plus also remains fully compatible with the existing
multichannel audio systems that incorporate Dolby Digital.
DTS 96/24 offers an unprecedented level of audio quality for multichannel
sound on DVD video, and is fully backward-compatible with all DTS
decoders. “96” refers to a 96 kHz sampling rate compared to the typical
48 kHz sampling rate. “24” refers to 24-bit word length. DTS 96/24 offers
sound quality transparent to the original 96/24 master, and 96/24 5.1channel sound with full-quality full-motion video for music programs and
motion picture soundtracks on DVD video.
Dolby Pro Logic II
A bi-amplification connection uses two amplifiers for a speaker. One
amplifier is connected to the woofer section of a loudspeaker while the
other is connected to the combined mid and tweeter section. With this
arrangement each amplifier operates over a restricted frequency range. This
restricted range presents each amplifier with a much simpler job and each
amplifier is less likely to influence the sound in some way.
Dolby Pro Logic II is an improved technique used to decode vast numbers
of existing Dolby Surround sources. This new technology enables a discrete
5-channel playback with 2 front left and right channels, 1 center channel,
and 2 surround left and right channels, instead of only 1 surround channel
for conventional Pro Logic technology. There are three modes available:
“Music mode” for music sources, “Movie mode” for movie sources, and
“Game mode” for game sources.
Dolby Digital
Dolby Pro Logic IIx
Dolby Digital is a digital surround sound system that gives you completely
independent multi-channel audio. With 3 front channels (front L/R and
center), and 2 surround stereo channels, Dolby Digital provides 5 full-range
audio channels. With an additional channel especially for bass effects,
called LFE (Low Frequency Effect), the system has a total of 5.1-channels
(LFE is counted as 0.1 channel). By using 2-channel stereo for the surround
speakers, more accurate moving sound effects and surround sound
environment are possible than with Dolby Surround. The wide dynamic
range from maximum to minimum volume reproduced by the 5 full-range
channels and the precise sound orientation generated using digital sound
processing provide listeners with unprecedented excitement and realism.
With this unit, any sound environment from monaural up to a 5.1-channel
configuration can be freely selected for your enjoyment.
Dolby Digital Surround EX
Dolby Digital EX creates 6 full-bandwidth output channels from 5.1channel sources. For the best results, Dolby Digital EX should be used with
movie sound tracks recorded with Dolby Digital Surround EX. With this
additional channel, you can experience more dynamic and realistic moving
sound especially with scenes with “fly-over” and “flyaround” effects.
Dolby Pro Logic IIx is a new technology enabling discrete multichannel
playback from 2-channel or multi-channel sources. There are three modes
available: “Music mode” for music sources, “Movie mode” for movie
sources (for 2-channel sources only) and “Game mode” for game sources.
Dolby TrueHD
Dolby TrueHD is an advanced lossless audio technology developed for
high-definition disc-based media including Blu-ray Disc. Selected as an
optional audio standard for Blu-ray Disc, this technology delivers sound
that is bit-for-bit identical to the studio master, offering a high-definition
home theater experience. Supporting bitrates up to 18.0 Mbps, Dolby
TrueHD can carry up to 8 discrete channels of 24-bit/96 kHz audio
simultaneously. Dolby TrueHD also remains fully compatible with the
existing multichannel audio systems and retains the metadata capability of
Dolby Digital, allowing dialog normalization and dynamic range control.
DTS Digital Surround
DTS digital surround was developed to replace the analog soundtracks of
movies with a 5.1-channel digital sound track, and is now rapidly gaining
popularity in movie theaters around the world. DTS, Inc. has developed a
home theater system so that you can enjoy the depth of sound and natural
spatial representation of DTS digital surround in your home. This system
produces practically distortion-free 6-channel sound (technically, front left
and right, center, surround left and right, and LFE 0.1 (subwoofer) channels
for a total of 5.1 channels). This unit incorporates a DTS-ES decoder that
enables 6.1-channel reproduction by adding the surround back channel to
the existing 5.1-channel format.
DTS Express
This is an audio format for next-generation optical discs such as Blu-ray
discs. It uses optimized low bit rate signals for network streaming. In the
case of a Blu-ray disc, this format is used with secondary audio, enabling
you to enjoy the commentary of the movie producer via the Internet while
playing the main program.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a high resolution audio technology
developed for high-definition disc-based media including Blu-ray Disc.
Selected as an optional audio standard for Blu-ray Disc, this technology
delivers sound that is virtually indistinguishable from the original, offering
a high-definition home theater experience.
Supporting bitrates up to 6.0 Mbps for Blu-ray Disc, DTS-HD High
Resolution Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz
audio simultaneously.
DTS-HD High Resolution Audio also remains fully compatible with the
existing multichannel audio systems that incorporate DTS Digital
Surround.
En
128
APPENDIX
Glossary
DTS-HD Master Audio
MPEG-4 AAC
DTS-HD Master Audio is an advanced lossless audio technology developed
for high-definition disc-based media including Blu-ray Disc. Selected as an
optional audio standard for Blu-ray Disc, this technology delivers sound
that is bit-for-bit identical to the studio master, offering a high-definition
home theater experience.
Supporting bitrates up to 24.5 Mbps for Blu-ray Disc, DTS-HD Master
Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz audio
simultaneously. Supported by HDMI version 1.3 and designed for the
optical disc players and AV receivers/amplifiers of the future, DTS-HD
Master Audio also remains fully compatible with the existing multichannel
audio systems that incorporate DTS Digital Surround.
An MPEG-4 audio standard. As it allows compression of data at a bit rate
lower than that of MPEG-2 AAC, it is used among others for mobile
telephones, portable audio players and other low-capacity devices requiring
high sound quality. In addition to the above types of devices, MPEG-4
AAC is also used to distribute contents on the Internet, and as such is
supported by computers, media servers and many other devices.
DTS Neo:6
Neo:6 decodes the conventional 2-channel sources for 6-channel playback
by the specific decoder. It enables playback with the fullrange channels
with higher separation just like digital discrete signal playback. There are
two modes available: “Music mode” for music sources and “Cinema mode”
for movie sources.
DSD
Direct Stream Digital (DSD) technology stores audio signals on digital
storage media, such as Super Audio CDs. Using DSD, signals are stored as
single bit values at a high-frequency sampling rate of 2.8224 MHz, while
noise shaping and oversampling are used to reduce distortion, a common
occurrence with very high quantization of audio signals. Due to the high
sampling rate, better audio quality can be achieved than that offered by the
PCM format used for normal audio CDs. The frequency is equal to or
higher than 100 kHz and the dynamic range is 120 dB. This unit can
transmit or receive DSD signals input from the HDMI jack.
FLAC
This is a file format for lossless audio data compression. FLAC is inferior
to lossy compression formats in compression rate but provides higher audio
quality.
MP3
One of the audio compression methods used by MPEG. It employs the
irreversible compression method, which achieves a high compression rate
by thinning out the data of hardly audible part to the human ears. It is said
to be capable of compressing the data quantity by about 1/11 (128 kbps)
while maintaining a similar audio quality to music CD.
Sound program information
CINEMA DSP
This channel reproduces low-frequency bass signals, and has a frequency
range from 20 Hz to 120 Hz. This channel is counted as 0.1, because it only
enforces a low-frequency range compared to the full-range reproduced by
the other 5-channels in Dolby Digital or DTS 5.1-channel systems.
Since the Dolby Surround and DTS systems were originally designed for
use in movie theaters, their effect is best felt in a theater having many
speakers designed for acoustic effects. Since home conditions, such as
room size, wall material, number of speakers, and so on, can differ so
widely, it is inevitable that there are differences in the sound that is heard.
Based on a wealth of actually measured data, Yamaha CINEMA DSP uses
Yamaha’s original DSP technology to combine Dolby Pro Logic, Dolby
Digital, and DTS systems to provide the audiovisual experience of a movie
theater in the listening room of your own home.
PCM (Linear PCM)
CINEMA DSP 3D
Linear PCM is a signal format under which an analog audio signal is
digitized, recorded and transmitted without using any compression. This is
used as a method of recording CDs and DVD audio. The PCM system uses
a technique for sampling the size of the analog signal per very small unit of
time. Standing for “Pulse Code Modulation,” the analog signal is encoded
as pulses and then modulated for recording.
The actually measured sound field data contain the information of the
height of the sound images. CINEMA DSP 3D feature achieves the
reproduction of the accurate height of the sound images so that it creates
the accurate and intensive stereoscopic sound fields in a listening room.
LFE 0.1 channel
Sampling frequency and number of quantized bits
When digitizing an analog audio signal, the number of times the signal is
sampled per second is called the sampling frequency, while the degree of
fineness when converting the sound level into a numeric value is called the
number of quantized bits. The range of rates that can be played back is
determined based on the sampling rate, while the dynamic range
representing the sound level difference is determined by the number of
quantized bits. In principle, the higher the sampling frequency, the wider
the range of frequencies that can be played back, and the higher the number
of quantized bits, the more finely the sound level can be reproduced.
WAV
Windows standard audio file format, which defines the method of recording
the digital data obtained by converting audio signals. It does not specify the
compression (coding) method so a desired compression method can be used
with it. By default, it is compatible with the PCM method (no compression)
and some compression methods including the ADPCM method.
Compressed music enhancer
The Compressed music enhancer feature of this unit enhances your
listening experience by regenerating the missing harmonics in compression
artifacts. As a result, it compensates for flattened complexity due to the loss
of high-frequency fidelity as well as lack of bass due to the loss of lowfrequency bass, providing improved performance for the overall sound
system.
SILENT CINEMA
Yamaha has developed a natural, realistic sound effect DSP algorithm for
headphones. Parameters for headphones have been set for each sound
program, so that accurate representations of all the sound programs can be
enjoyed on headphones.
Virtual CINEMA DSP
Yamaha has developed a Virtual CINEMA DSP algorithm that allows you
to enjoy DSP surround effects even without any surround speakers, by
using virtual surround speakers. It is even possible to enjoy Virtual
CINEMA DSP using a minimal two-speaker system that does not include a
center speaker.
WMA
An audio compression method developed by Microsoft Corporation. It
employs the irreversible compression method, which achieves a high
compression rate by thinning out the data of hardly audible part to the
human ears. It is said to be capable of compressing the data quantity by
about 1/22 (64 kbps) while maintaining a similar audio quality to music
CD.
En
129
APPENDIX
Glossary
Video information
Deep Color
Component video signal
With the component video signal system, the video signal is separated into
the Y signal for luminance and the PB and PR signals for chrominance.
Color can be reproduced more faithfully with this system because each of
these signals is independent. The component signal is also called the “color
difference signal” because the luminance signal is subtracted from the color
signal. A monitor with component input jacks is required in order to output
component signals.
Composite video signal
With the composite video signal system, the video signal comprises the
three basic elements of a video picture: color, brightness and
synchronization data. A composite video jack on a video component
transmits these three elements combined.
Deep Color refers to the use of various color depths in displays, up from the
24-bit depths in previous versions of the HDMI specification. This extra bit
depth allows HDTVs and other displays go from millions of colors to
billions of colors and eliminate on-screen color banding for smooth tonal
transitions and subtle gradations between colors. The increased contrast
ratio can represent many times more shades of gray between black and
white. Also, Deep Color increases the number of available colors within the
boundaries defined by the RGB or YCbCr color space.
HDMI
HDMI (High-Definition Multimedia Interface) is the first industry
supported, uncompressed, all-digital audio/video interface. Providing an
interface between any sources (such as set-top boxes or AV receivers) and
audio/video monitor (such as digital television), HDMI supports standard,
enhanced or high-definition video as well as multichannel digital audio
using a single cable. HDMI transmits all ATSC HDTV standards and
supports 8-channel digital audio, with bandwidth to spare to accommodate
future enhancements and requirements.
When used in combination with HDCP (High-bandwidth Digital Content
Protection), HDMI provides a secure audio/video interface that meets the
security requirements of content providers and system operators. For
further information on HDMI, visit the HDMI website at
“http://www.hdmi.org/.”
S-video signal
With the S-video signal system, the video signal normally transmitted using
a pin cable is separated and transmitted as the Y signal for the luminance
and the C signal for the chrominance through the S-video cable. Using the
S-VIDEO jack eliminates video signal transmission loss and allows
recording and playback of even more beautiful images.
“x.v.Color”
A color space standard supported by HDMI version 1.3. It is a more
extensive color space than sRGB, and allows the expression of colors that
could not be expressed before. While remaining compatible with the color
gamut of sRGB standards, “x.v.Color” expands the color space, and can
thus produce more vivid, natural images. It is particularly effective for still
pictures and computer graphics.
Compatibility of the input and output video signals
Analog-to-HDMI video conversion is performed according to resolution of video signals as shown below. Analog-to-analog video conversion is also possible when “Analog to Analog Conversion” is
set to “On” (☞p. 96).
✓:
HDMI output
Resolution
480i/576i
480p/576p
720p
1080i
1080p
480i/576i
✓
✓
✓
✓
✓
✓
✓
✓
✓
480p/576p
HDMI input
COMPONENT VIDEO output
720p
1080i
VIDEO output
480i/576i
480i/576i
✓
✓
✓
1080i
✓
1080p
COMPONENT
VIDEO input
480p/576p
S-VIDEO output
✓
720p
480i/576i
480i/576i
available conversion
✓
480p/576p
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
720p
✓
✓
1080i
✓
S-VIDEO input
480i/576i
✓
✓
✓
✓
✓
✓
✓
✓
VIDEO input
480i/576i
✓
✓
✓
✓
✓
✓
✓
✓
En
130
APPENDIX
Information on HDMI™
■ HDMI signal compatibility
Audio signals
Audio signal types
Audio signal formats
Compatible media
2ch Linear PCM
2ch, 32-192 kHz, 16/20/24 bit
CD, DVD-Video, DVD-Audio, etc.
Multi-ch Linear PCM
8ch, 32-192 kHz, 16/20/24 bit
DVD-Audio, Blu-ray Disc, HD DVD,
etc.
DSD
2/5.1ch, 2.8224 MHz, 1 bit
SACD, etc.
Bitstream
Dolby Digital, DTS
DVD-Video, etc.
Bitstream (High definition audio)
Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio, DTS-HD
High Resolution Audio, DTS Express
Blu-ray Disc, HD DVD, etc.
• If the input source component can decode the bitstream audio signals of audio commentaries, you can playback the audio
sources with the audio commentaries mixed down by using the digital audio input (optical or coaxial) connections.
• Refer to the supplied instruction manuals of the input source component, and set the component appropriately.
NOTES
• When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output,
depending on the type of the DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or DVI components.
• Refer to the supplied instruction manuals for details.
To decode audio bitstream signals on this unit, set the input source component appropriately so that the
component outputs the bitstream audio signals directly (does not decode the bitstream signals on the
component).
• This unit is not compatible with the audio commentary features (for example, the special audio contents
downloaded via Internet) of Blu-ray Disc or HD DVD. This unit does not playback the audio
commentaries of the Blu-ray Disc or HD DVD content.
Video signals
This unit is compatible with the video signals of the following resolutions:
–
–
–
–
480i/60 Hz
576i/50 Hz
480p/60 Hz
576p/50 Hz
– 720p/60 Hz, 50 Hz
– 1080i/60 Hz, 50 Hz
– 1080p/60 Hz, 50 Hz, 24 Hz
En
131
APPENDIX
About trademarks
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are
trademarks of Dolby Laboratories.
This receiver supports network connections.
Bluetooth™
Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a
license agreement.
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195;
7,272,567 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered
trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
iPod™, iPhone™
“iPod” is a trademark of Apple Inc., registered in the U.S. and other countries. “iPhone” is a trademark
of Apple Inc.
“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered
trademarks of HDMI Licensing LLC.
x.v.Color™
“x.v.Color” is a trademark of Sony Corporation.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Windows XP, Windows Vista, Windows 7, Windows Media Audio, Windows Media Connect and
Windows Media Player are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
En
132
APPENDIX
Specifications
■ Input
AV OUT
Composite..................................................................................... 1
S-video.......................................................................................... 1
DLNA
Version ............................................... 1.5 (DMP & DMR support)
Audio Format ............. MP3, WMA, WAV, MPEG-4 AAC, FLAC
Max Audio Support fs...............................................96 kHz/24 bit
Cover Art Format .........................................................PNG, JPEG
[U.S.A. model] Internet Music Service
Rhapsody, Sirius Internet Radio
Network Control
Web Browse Control, MusicCAST2 Commander Support,
Yamaha Network Control Support (YNC), Receiver Manager
Support
• Analog Audio
RCA ...............................................................................................10
AV1-4, AUDIO1-4, PHONO, VIDEO AUX
MULTI CH INPUT...................................................................... 8ch
FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R, SUBWOOFER
■ HDMI
• Digital Audio
Optical ...................................... 4 (AV3-4, AUDIO1, VIDEO AUX)
Coaxial.............................................................. 3 (AV1-2, AUDIO2)
• HDMI Specification
Deep Color 30/36 bit, “x.v.Color,” Auto Lips Sync, HD Audio,
ARC (Audio Return Channel), 3D
• Analog Video
Composite..................................................5 (AV1-4, VIDEO AUX)
S-video.......................................................5 (AV1-4, VIDEO AUX)
Component ........................................................................4 (AV1-4)
• Audio Format
Dolby Digital, DTS, DSD 6ch, Dolby Digital Plus, Dolby TrueHD,
DTS-HD, PCM 2ch-8ch
• Other
DOCK.............................1 (Audio L/R, Composite Video, S-video)
■ Tuner
• REMOTE OUT...................................................................................1
• Analog Tuner
FM/AM .......................................................................... 1 (TUNER)
• TRIGGER OUT ...................................... 2 (12 V/total 100 mA max.)
■ Output
• Analog Audio
SPEAKERS .................................................... 9ch (7ch + Extra 2ch)
FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK/BI-AMP L/R,
EXTRA SP (ZONE2/F.PRESENCE L/R)
PRE OUT..................................................................................... 9ch
FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R, SUBWOOFER [Mono 2ch]
AV OUT...........................................................................................1
ZONE2 OUT ................................................................................... 1
• Digital Audio
Optical ...........................................................................1 (AV OUT)
• Analog Video
MONITOR OUT/ZONE OUT
Composite .....................................................................................1
S-video .......................................................................................... 1
Component....................................................................................1
• Input ............................................................. 8 (AV1-7, VIDEO AUX)
• Output .........................................................................2 (HDMI OUT)
• Content Protection ..................................................HDCP compatible
• [U.S.A. model] HD Radio with iTunes Tagging............... 1 (TUNER)
• [U.S.A. model] Satellite Radio Ready
SIRIUS Radio.................................................................. 1 (SIRIUS)
■ Network
• USB (USB1.1 Full Speed) ................................................................. 1
Device Type..................................... USB Mass Storage Class, MTP
Audio Format ................ MP3, WMA, WAV, MPEG-4 AAC, FLAC
Max Audio Support fs................................................. 48 kHz/24 bit
Cover Art Format ........................................................... PNG, JPEG
• Ethernet (100Base-TX/10Base-TX) .................................................. 1
Internet Radio
Audio Format.............................................................. MP3, WMA
PC Server
Audio Format.............. MP3, WMA, WAV, MPEG-4 AAC, FLAC
Max Audio Support fs .............................................. 96 kHz/24 bit
Cover Art Format......................................................... PNG, JPEG
■ Remote
• RS-232C .............................................................................................1
• REMOTE IN.......................................................................................1
■ Compatible Decoding Format
• Decoding Format
Dolby TrueHD, Dolby Digital Plus, Dolby Digital, Dolby Digital
EX, DTS-HD Master Audio, DTS-HD High Resolution Audio,
DTS Express, DTS, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1,
DTS 96/24
• Post Decoding Format
Dolby Pro Logic, Dolby Pro Logic II Music, Dolby Pro Logic II
Movie, Dolby Pro Logic II Game, Dolby Pro Logic IIx Music,
Dolby Pro Logic IIx Movie, Dolby Pro Logic IIx Game, DTS
Neo:6 Music, DTS Neo:6 Cinema
■ Audio Section
• Minimum RMS Output Power (20 Hz to 20 kHz, 0.06 % THD, 8 Ω)
FRONT L/R ............................................................. 105 W + 105 W
CENTER................................................................................. 105 W
SURROUND L/R .................................................... 105 W + 105 W
SURROUND BACK L/R ....................................................... 105 W
• Dynamic Power (IHF)
FRONT L/R, 8/6/4/2 Ω......................................135/165/210/280 W
En
133
APPENDIX
Specifications
• Dynamic Headroom
8 Ω .......................................................................................... 1.1 dB
• Damping Factor
FRONT L/R, 1 kHz, 8 Ω ............................................... 150 or more
• Input Sensitivity/Input Impedance
PHONO ......................................................................3.5 mV/47 kΩ
AUDIO2 etc...............................................................200 mV/47 kΩ
MULTI CH IN ...........................................................200 mV/47 kΩ
• Maximum Input Level
PHONO (1 kHz, 0.1 % THD) .................................. 60 mV or more
AUDIO2 etc. (1 kHz, 0.5 % THD) ............................. 2.4 V or more
• Output Level/Output Impedance
AV OUT....................................................................200 mV/1.2 kΩ
HEADPHONE OUT .................................................150 mV/100 Ω
PRE OUT......................................................................1.0 V/1.2 kΩ
ZONE2 OUT ................................................................1.0 V/1.2 kΩ
• Tone Control Characteristics
Main Zone (FRONT)
Bass Boost/Cut ...........................................................±6 dB/50 Hz
Bass Turnover Frequency ....................................................350 Hz
Treble Boost/Cut.......................................................±6 dB/20 kHz
Treble Turnover Frequency ................................................3.5 kHz
Zone2
Bass Boost/Cut .......................................................±10 dB/100 Hz
Bass Turnover Frequency ....................................................350 Hz
Treble Boost/Cut.....................................................±10 dB/10 kHz
Treble Turnover Frequency ................................................3.5 kHz
• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (FRONT, CENTER, SURROUND, SURROUND BACK:
Small) ................................................................................12 dB/oct.
L.P.F. (SUBWOOFER) .....................................................24 dB/oct.
■ Video Section
• Frequency Response
AUDIO2 etc. to FRONT L/R
(Pure Direct, 10 Hz to 100 kHz)..........................................+0/-3 dB
• Video Format (MONITOR OUT/ZONE OUT, Wall Paper/OSD)
[U.S.A. and Canada models]...........................................NTSC/PAL
[Australia model] ............................................................PAL/NTSC
• Total Harmonic Distortion
PHONO to AV OUT (20 Hz to 20 kHz, 1 V)............. 0.02 % or less
AV1 to FRONT L/R (20 Hz to 20 kHz, 55 W/8 Ω).... 0.04 % or less
• Video Signal Type (Video Conversion) .............................NTSC/PAL
• Signal to Noise Ratio (IHF-A Network)
PHONO (input shorted, 5 mV) to AV OUT
[U.S.A and Canada models] .......................................86 dB or more
[Australia models] ......................................................81 dB or more
AUDIO2 etc. (input shorted, 250 mV) to FRONT L/R
..................................................................................100 dB or more
• Residual Noise (IHF-A Network)
FRONT L/R ................................................................150 µV or less
• Channel Separation (1 kHz/10 kHz)
PHONO (input shorted)................................... 60 dB/55 dB or more
AV1 etc. (input 5.1 kΩ shorted)....................... 60 dB/45 dB or more
• Volume Control
Main Zone ................................................... MUTE/-80 to +16.5 dB
Zone2 ........................................................... MUTE/-80 to +16.5 dB
• Signal Level
Composite ..................................................................... 1 Vp-p/75 Ω
S-video
- NTSC................................1 Vp-p/75 Ω (Y), 0.286 Vp-p/75 Ω (C)
- PAL .......................................1 Vp-p/75 Ω (Y), 0.3 Vp-p/75 Ω (C)
Component ...................... 1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR)
• Maximum Input Level (Video Conversion Off) .......1.5 Vp-p or more
• Signal to Noise Ratio (Video Conversion Off) ............. 60 dB or more
• Frequency Response (Video Conversion Off)
Component (MONITOR OUT/ZONE OUT)
................................................................... 5 Hz to 100 MHz, ±3 dB
■ FM Section
• Tuning Range
[U.S.A. and Canada models] .............................. 87.5 to 107.9 MHz
[Australia model] ............................................ 87.50 to 108.00 MHz
• 50 dB Quieting Sensitivity (IHF)
Mono..................................................................... 3.0 µV (20.8 dBf)
• Signal to Noise Ration (IHF)
Mono/Stereo ................................................................. 74 dB/70 dB
[U.S.A. model] HD .................................................................. 80 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo .................................................................. 0.3 %/0.3 %
[U.S.A. model] HD ................................................................ 0.03 %
• Antenna Input .........................................................75 Ω (unbalanced)
■ AM Section
• Tuning Range
[U.S.A. and Canada models] .................................. 530 to 1710 kHz
[Australia model] .................................................... 531 to 1611 kHz
■ General
• Power Supply
[U.S.A. and Canada models] ................................. AC 120 V, 60 Hz
[Australia model] ................................................... AC 240 V, 50 Hz
• Power Consumption
[U.S.A. model]...........................................................490 W/620 VA
[Canada model]..........................................................400 W/510 VA
[Australia model] .................................................................... 490 W
• Standby Power Consumption
HDMI Control Off/Standby Through Off.....................0.3 W or less
HDMI Control On/Standby Through On.................. 2.7 W (typical)
NET Standby On....................................................... 4.5 W (typical)
• Dimensions (W x H x D)
............................... 435 x 182 x 430 mm (17-1/8 x 7-1/8 x 16-7/8 in)
• Weight..................................................................... 14.7 kg (32.4 lbs.)
En
134
APPENDIX
Index
Numerics
2ch stereo playback...................................................................... 50
5 channel speaker layout .............................................................. 18
5.1-channel speaker layout........................................................... 17
7.1-channel speaker connection ................................................... 19
7.1-channel speaker layout........................................................... 16
A
Adaptive DRC, Option menu....................................................... 57
Adaptive DSP Level, Sound Setup .............................................. 95
Advanced Setup menu ............................................................... 110
Advanced speaker configuration.................................................. 23
AM antenna connection ............................................................... 37
AM tuning.................................................................................... 60
Analog to Analog Conversion, Video setup ................................ 96
ARC (Audio Return Channel), HDMI setup ............................... 97
Aspect, Processing, Video setup .................................................. 96
AUDIO jack ................................................................................. 24
Audio Output, HDMI setup ......................................................... 98
Audio Return Channel function ................................................. 116
Audio Select, Option menu.......................................................... 58
Audio Signal, Information menu ............................................... 105
Auto Power Down, Function setup............................................ 102
Auto Preset................................................................................... 62
Auto Setup, Speaker setup ........................................................... 90
B
Basic playback ............................................................................. 45
BD player connection .................................................................. 28
Bi-amp connection, speaker......................................................... 20
Bluetooth™ component playback................................................ 74
Bookmark Off, Internet Radio ..................................................... 67
Bookmark On, Internet Radio...................................................... 67
Browse view................................................................................. 59
C
Cable plug .................................................................................... 24
Center Image, Sound Program menu ........................................... 88
Center Level, Sound Program menu ........................................... 87
Center speaker............................................................................. 15
Center Width, Sound Program menu .......................................... 88
Changing speaker impedance...................................................... 20
CINEMA DSP 3D mode............................................................. 49
CINEMA DSP 3D Mode, Option menu ..................................... 57
CINEMA DSP indicator ............................................................. 11
CINEMA DSP parameters .......................................................... 85
Clear All Preset ........................................................................... 62
Clear Preset ................................................................................. 62
Close, DOCK (iPod) ................................................................... 71
COAXIAL jack ........................................................................... 24
COMPONENT VIDEO jack....................................................... 24
Compressed Music Enhancer...................................................... 50
Configuration, Manual Setup, Speaker setup.............................. 91
Connect, Option menu ................................................................ 58
Connecting speakers.................................................................... 19
Connecting to network ................................................................ 35
Connecting USB storage device.................................................. 36
Connections................................................................................. 15
Content window .......................................................................... 59
Control Select, HDMI setup........................................................ 97
Controlling Zone2 ..................................................................... 120
Cursor indicators ......................................................................... 11
E
D
HDMI Control function............................................................. 114
HDMI Control, HDMI setup ....................................................... 97
HDMI indicator ........................................................................... 11
HDMI jack................................................................................... 24
HDMI Monitor, Information menu ........................................... 105
HDMI setup................................................................................. 97
High-frequency sound adjustment............................................... 46
Decode Type, Sound Program menu .................................... 87, 88
Decoder Mode, Input menu......................................................... 80
Dialogue Lift, Option menu ........................................................ 57
Dimension, Sound Program menu .............................................. 88
Direct, Sound Program menu...................................................... 87
Disconnect, Option menu............................................................ 58
Display Set, Function setup....................................................... 103
Distance, Speaker setup .............................................................. 93
DMC Control, Input menu .......................................................... 80
DSP Level, Sound Program menu .............................................. 85
DVD player connection............................................................... 28
Dynamic Range, Sound setup ..................................................... 95
Enhancer, Input menu..................................................................
Extended Surround, Option menu ...............................................
External component connection ..................................................
External decoder connection .......................................................
80
57
24
33
F
Features of Web Control Center.................................................. 76
FIRM UPDATE, Advanced Setup menu .................................. 113
FM antenna connection ............................................................... 37
FM Mode..................................................................................... 62
FM tuning .................................................................................... 60
Front panel..................................................................................... 8
Front panel display ...................................................................... 11
Front Presence L Level, Sound Program menu........................... 87
Front Presence R Level, Sound Program menu .......................... 88
Front speaker ............................................................................... 15
Function setup ........................................................................... 101
G
Game connection......................................................................... 33
H
I
Information menu ...................................................................... 105
Initial Delay, Sound Program menu ............................................ 85
Initial Volume, Sound setup........................................................ 95
INITIALIZE, Advanced Setup menu........................................ 112
Input Assignment, Function setup............................................. 102
En
135
APPENDIX
Index
Input menu ................................................................................... 78
Input menu list ............................................................................. 79
Internet Radio............................................................................... 67
IP Address, Network setup .......................................................... 99
iPhone™ playback ....................................................................... 70
iPod Interlock, Input menu .......................................................... 80
iPod™ playback........................................................................... 70
J
Jack .............................................................................................. 24
Network Standby, Network setup ............................................... 99
Network, Information menu...................................................... 106
Normal tuning ............................................................................. 60
Now Playing view ....................................................................... 59
O
ON SCREEN menu.....................................................................
On-screen display........................................................................
OPTICAL jack ............................................................................
Option menu................................................................................
Option menu list..........................................................................
53
14
24
55
56
L
Language.................................................................................... 104
Level, Speaker setup .................................................................... 93
Lipsync, Sound setup ................................................................... 94
Liveness, Sound Program menu .................................................. 86
Load, Scene menu........................................................................ 82
Low-frequency sound adjustment................................................ 46
M
MAC Address Filter, Network setup ........................................... 99
Manual Preset............................................................................... 60
Manual Setup, Speaker setup ....................................................... 90
Manual Tuning, TUNER ............................................................. 61
Max Volume, Sound setup........................................................... 95
Memory Guard, Function setup ................................................. 104
Menu browse control ................................................................... 71
MONITOR CHECK, Advanced Setup menu ............................ 112
Monitor Out Assign, Multi Zone setup...................................... 100
Multi information display ............................................................ 11
Multi Zone setup ........................................................................ 100
Multi-format player connection ................................................... 33
Multi-zone function ................................................................... 118
MUTE indicator ........................................................................... 11
N
Network connection ..................................................................... 35
NETWORK port .......................................................................... 35
Network setup .............................................................................. 99
P
Pairing, Option menu .................................................................. 58
Panorama, Sound Program menu................................................ 88
Parametric EQ, Speaker setup..................................................... 93
Party mode ................................................................................ 120
Party Mode Set, Multi Zone setup ............................................ 100
PC................................................................................................ 63
PHONES jack................................................................................ 9
Play Control, DOCK (iPod) ........................................................ 72
Play Control, PC.......................................................................... 64
Play Control, USB....................................................................... 66
Power Amp Assign, Manual Setup, Speaker setup..................... 91
PREOUT connection................................................................... 23
Presence speaker ......................................................................... 15
Presence speaker connection....................................................... 19
Presence speaker layout .............................................................. 17
Preset Select, TUNER................................................................. 62
Pure Direct Mode ........................................................................ 50
Pure Direct Mode, Sound Setup.................................................. 95
R
Rear panel.................................................................................... 10
Recording device connection ...................................................... 35
RECOV./BACKUP, Advanced Setup menu............................. 112
Registering remote control codes.............................................. 108
REMOTE CON AMP, Advanced Setup menu ......................... 111
Remote control ............................................................................ 12
Remote control battery installation ............................................. 12
Remote control connection.......................................................... 34
Remote control, Controlling other components ........................ 107
REMOTE SENSOR, Advanced Setup menu ............................ 111
Rename/Icon Select, Input menu................................................. 79
Rename/Icon Select, Scene menu ............................................... 83
Repeat, Option menu................................................................... 58
Reset, Scene menu....................................................................... 83
Resetting all remote control codes ............................................ 109
Resolution, Processing, Video setup ........................................... 96
Reverb Delay, Sound Program menu .......................................... 86
Reverb Level, Sound Program menu .......................................... 87
Reverb Time, Sound Program menu ........................................... 86
Room Size, Sound Program menu .............................................. 85
S
Save, Scene menu........................................................................ 82
SCENE function .......................................................................... 47
Scene menu.................................................................................. 81
Setting Data Copy, Manual Setup, Speaker setup....................... 90
Setting Pattern, Manual Setup, Speaker setup............................. 90
Setup menu .................................................................................. 89
Setup menu list ............................................................................ 90
Shortcut function ......................................................................... 69
Shuffle, Option menu .................................................................. 58
SILENT CINEMA mode............................................................. 48
Simple remote control ................................................................. 72
Sound program ............................................................................ 48
Sound program list ...................................................................... 51
Sound Program menu .................................................................. 84
Sound setup ................................................................................. 94
Speaker connection...................................................................... 15
SPEAKER IMP., Advanced Setup menu.................................. 110
Speaker indicators ....................................................................... 11
Speaker layout ....................................................................... 16, 23
Speaker setting ............................................................................ 38
Speaker setup............................................................................... 90
Standby Charge, Input menu ....................................................... 80
Standby Through, HDMI setup ................................................... 98
Straight decoding mode............................................................... 49
Subwoofer ................................................................................... 15
En
136
APPENDIX
Index
Supplied accessories ...................................................................... 2
Surround Back Initial Delay, Sound Program menu ................... 85
Surround Back L Level, Sound Program menu ........................... 87
Surround Back Liveness, Sound Program menu ......................... 86
Surround Back R Level, Sound Program menu........................... 87
Surround Back Room Size, Sound Program menu ...................... 85
Surround back speaker ................................................................. 15
Surround Initial Delay, Sound Program menu............................. 85
Surround L Level, Sound Program menu .................................... 87
Surround Liveness, Sound Program menu................................... 86
Surround R Level, Sound Program menu .................................... 87
Surround Room Size, Sound Program menu ............................... 85
Surround speaker ......................................................................... 15
S-VIDEO jack.............................................................................. 24
System, Information menu......................................................... 106
T
Test Tone, Speaker setup ............................................................. 94
Tone control ................................................................................. 46
Tone Control, Option menu ......................................................... 57
Transmitter of the Wireless System for iPod ............................... 72
Trigger connection ....................................................................... 34
Trigger Output, Function setup.................................................. 103
Tuner indicator............................................................................. 11
TV Audio Input, HDMI setup...................................................... 98
TV FORMAT, Advanced Setup menu ...................................... 112
TV monitor connection ................................................................ 25
Virtual CINEMA DSP 3D mode................................................. 49
Virtual CINEMA DSP mode ...................................................... 48
VOLUME...................................................................................... 8
VOLUME indicator .................................................................... 11
Volume Trim, Option menu........................................................ 58
W
Web Control Center .................................................................... 76
Y
YPAO.......................................................................................... 38
Z
ZONE OUT connection .............................................................. 23
Zone Rename, Multi Zone setup............................................... 101
Zone Scene Rename, Multi Zone setup .................................... 101
Zone, Information menu............................................................ 106
Zone2 Set, Multi Zone setup..................................................... 100
U
USB port ...................................................................................... 36
USB storage device connection ................................................... 36
USB storage devices .................................................................... 65
Utility, TUNER............................................................................ 62
V
VERSION, Advanced Setup menu ............................................ 113
VIDEO jack ................................................................................. 24
Video Out, Input menu ................................................................ 80
Video setup .................................................................................. 96
Video Signal, Information menu................................................ 105
En
137
© 2010 Yamaha Corporation
YC711C0/OMEN2
© 2010 Yamaha Corporation
Printed in Malaysia
WW68000
The latest firmware notification / La dernière notification du pare-feu /
Meldung der neuesten Firmware-Version / Meddelande om senaste firmware /
L’avviso per il firmware più recente
When the following notifications are displayed in the ON SCREEN menu while this unit is connected to the network, the firmware of this unit
can be updated by using the Advanced Setup menu. Refer to “Firmware update” in the Owner’s Manual for details on how to update the firmware.
Si les notifications suivantes sont affichées dans le menu ON SCREEN alors que cet appareil est connecté au réseau, le pare-feu de cet appareil
peut être mis à jour à l’aide du menu Advanced Setup. Reportez-vous à la section « Mise à jour du pare-feu » dans le Mode d’emploi pour plus de
détails concernant la manière de mettre à jour le pare-feu.
Wenn das ON SCREEN-Menü die unten stehenden Meldungen enthält während dieses Gerät mit dem Netzwerk verbunden ist, kann die Firmware dieses
Geräts im Advanced Setup-Menü aktualisiert werden. Wie Sie die Firmware aktualisieren, ist unter „Firmware-Update“ in der Bedienungsanleitung beschrieben.
När följande meddelande visas på ON SCREEN-menyn medan receivern är ansluten till nätverket, kan firmware för receivern uppdateras via
Advanced Setup-menyn. Se “Firmware-uppdatering” i Bruksanvisningen för mer information om hur man uppdaterar firmware.
Quando compaiono i seguenti avvisi nel menu ON SCREEN e l’unità è collegata alla rete, è possibile aggiornare il firmware dell’unità tramite il
menu Advanced Setup. Fare riferimento a “Aggiornamento firmware” nel Manuale di istruzioni per maggiori dettagli su come aggiornare il firmware.
■
■
■
■
■
When pressing ON SCREEN
Lorsqu’on appuie sur ON SCREEN
ON SCREEN gedrückt
När ON SCREEN trycks ner
Quando si preme ON SCREEN
aa
aa
Message
Message
Meldung
Meddelande
Messaggio
Aviso sobre la última versión del firmware / De nieuwste firmware-kennisgeving /
Уведомление о последнем встроенном программном обеспечении /
最新固件通知 / 최신 펌웨어 알림
Cuando los avisos siguientes aparecen en el menú ON SCREEN estando esta unidad conectada a la red, el firmware de esta unidad se puede actualizar utilizando
el menú Advanced Setup. Consulte “Actualización del firmware” en el Manual de Instrucciones para conocer más detalles sobre cómo actualizar el firmware.
Wanneer de volgende kennisgevingen worden weergegeven in het ON SCREEN-menu als dit toestel is aangesloten op het netwerk, dan kan de firmware van dit
toestel worden geupdate via het Advanced Setup menu. Raadpleeg “Firmware update” in de Gebruiksaanwijzing voor informatie over het updaten van de firmware.
При отображении следующих уведомлений в меню ON SCREEN, когда аппарат подсоединен к сети, встроенное программное обеспечение
данного аппарата может быть обновлено с помощью меню Advanced Setup. Для получения подробной информации об обновлении
встроенного программного обеспечения см. “Обновление встроенного программного обеспечения” в документе Инструкция по эксплуатации.
在本机连接至网络的情况下，如果在 ON SCREEN 菜单中显示以下通知，则可利用 Advanced Setup 菜单对本机的固件进行更新。请参见使用说
明书中的 “ 固件更新 ”，获取有关固件更新方法的详情。
이 장치를 네트워크에 연결할 때 ON SCREEN 메뉴에 다음의 알림 메시지가 표시되는 경우 , Advanced Setup 메뉴를 사용하여 이 장치의 펌웨어를
업데이트할 수 있습니다 . 펌웨어 업데이트 방법에 대한 자세한 내용은 사용 설명서에서 “ 펌웨어 업데이트 ” 를 참조하십시오 .
■
■
■
■
Al pulsar ON SCREEN
Bij drukken op ON SCREEN
При нажатии ON SCREEN
按 ON SCREEN 时
■ ON SCREEN 을 누를 경우
aa
aa
Mensaje
Bericht
Сообщение
信息
메시지
List of remote control codes
Lista de códigos de mando a distancia
Liste des codes de commande
Lijst met afstandsbedieningscodes
Liste der Fernbedienungscodes
Lista över fjärrstyrningskoder
Elenco dei codici di telecomando
TV
A.R. Systems
Acme
Acura
ADC
Admiral
0320
0342
0323, 0343
0337
0054, 0178, 0336,
0337, 0339, 0346,
0347
Advent
0158
Adventura
0057
Adyson
0277, 0282, 0342
Agashi
0277, 0282
Agazi
0337
Aiko
0277, 0282, 0320,
0323, 0342, 0343
Aim
0320
Aiwa
0078, 0379
Akai
0050, 0055, 0109,
0159, 0181, 0277,
0282, 0320, 0323,
0340, 0343, 0349,
0350
Akiba
0320, 0340
Akura
0320, 0323, 0337,
0340
Alaron
0277
Alba
0161, 0277, 0320,
0323, 0340, 0342,
0343, 0344, 0349,
0351, 0372, 0382
Albatron
0140
Alcyon
0171
Alleron
0059
Allorgan
0282
Allstar
0320, 0350
America Action 0179
AMOi
0276
Amplivision
0161, 0282, 0321,
0342
Amstrad
0320, 0323, 0337,
0340, 0343
Amtron
0058
Anam
0179, 0343
Anam National 0052, 0058
Anglo
0323, 0343
Anitech
0171, 0320, 0323,
0337, 0343
Ansonic
0161, 0168, 0320,
0323, 0341, 0343
AOC
0008, 0026, 0050,
0053
Apex
0039, 0111, 0217
Arcam
0277, 0282
Arcam Delta
0342
Aristona
0320, 0349, 0350
Arthur Martin 0321
ASA
0339, 0347
Asberg
0171, 0320, 0350
Astra
0343
Asuka
0277, 0282, 0337,
0340, 0342
Atlantic
0277, 0320, 0342,
0349, 0350
Atori
0323, 0343
Auchan
0321
Audiosonic
0161, 0282, 0320,
0340, 0342, 0343,
0349, 0350
AudioTon
0161, 0282, 0342
Audiovox
0058, 0179, 0194
Ausind
0171
Autovox
0171, 0282, 0337,
0339, 0342
Aventura
0051
Awa
0277, 0282
Axion
Baird
Bang & Olufsen
Basic Line
0156
0282
0180, 0339
0282, 0320, 0323,
0340, 0343, 0350
Bastide
0282, 0342
Baur
0320, 0349
Bazin
0282
Beko
0161, 0269, 0294,
0302, 0311, 0320,
0328, 0351
Belcor
0008
Bell & Howell 0019, 0054
Benq
0097, 0242, 0361
Beon
0320, 0349, 0350
Best
0161
Bestar
0161, 0320, 0350
Binatone
0282, 0342
Blue Sky
0320, 0340
Blue Star
0348
Boots
0282, 0342
BPL
0320, 0348
Bradford
0058, 0179
Brandt
0322, 0345
Brillian
0182
Brinkmann
0320
Brionvega
0320, 0339, 0349,
0350
Britannia
0277, 0282, 0342
Brockwood
0008
Broksonic
0109, 0179
Bruns
0339
BTC
0340
Bush
0269, 0282, 0283,
0304, 0320, 0323,
0328, 0332, 0340,
0343, 0344, 0346,
0348, 0349, 0350,
0372, 0382, 0463,
0470, 0472
Candle
0008, 0026, 0050,
0057
Capsonic
0337
Carena
0320
Carnivale
0050
Carrefour
0344
Carver
0010
Cascade
0320, 0323, 0343
Casio
0367
Cathay
0320, 0349, 0350
CCE
0183, 0282
Celebrity
0055, 0107
Celera
0039
Centurion
0320, 0349, 0350
Century
0339
CGE
0161, 0171
Changhong
0039
Chimei
0273
Cimline
0323, 0343
Citizen
0007, 0008, 0026,
0050, 0058
City
0323, 0343
Clarion
0179
Clarivox
0349
Clatronic
0161, 0171, 0282,
0320, 0323, 0337,
0340, 0342, 0343,
0350, 0351
CMS
0277
CMS Hightec 0282
Coby
0197
Colortyme
0008, 0026
Commercial Solutions
0021
Concerto
0008, 0026
Concorde
0323, 0343
Condor
0161, 0277, 0320,
0323, 0342, 0350,
0351
Contec
0179, 0277, 0323,
0342, 0343, 0344
Contec/Cony
0012, 0058
Continental Edison
0345
Cosmel
0323, 0343
Craig
0058, 0179
Crosley
0010, 0037, 0171,
0339
Crown
0058, 0161, 0171,
0179, 0320, 0323,
0343, 0349, 0350,
0351
CS Electronics 0277, 0340, 0342
CTC Clatronic 0341
CTX
0205
Curtis Mathes 0007, 0008, 0010,
0019, 0021, 0026,
0049, 0050, 0178
CXC
0058, 0179
Cybertron
0340
Cytron
0152
Daewoo
0007, 0008, 0026,
0037, 0053, 0167,
0266, 0275, 0277,
0282, 0315, 0320,
0323, 0331, 0335,
0342, 0343, 0350,
0381, 0465
Dainichi
0277, 0340
Dansai
0277, 0282, 0320,
0337, 0349, 0350
Dantax
0161, 0349
Dawa
0320
Daytron
0007, 0008, 0026,
0323, 0343
De Graaf
0346
Decca
0282, 0320, 0342,
0349, 0350
Dell
0145, 0245
Denver
0358, 0362
Desmet
0320, 0349, 0350
Diamant
0320
Diamond
0277
DiamondVision 0135, 0143
Dimensia
0049
Disney
0219
Dixi
0282, 0320, 0323,
0343, 0349, 0350
Dream Vision 0461, 0498
DTS
0323, 0343
Dual
0282, 0320, 0342
Dual-Tec
0342, 0343
Dumont
0008, 0030, 0062,
0282, 0339, 0341,
0342
Durabrand
0031, 0051, 0179,
0215
Dux
0349
Dwin
0178
Dynatron
0320, 0349, 0350
Dynex
0228, 0231
Elbe
0161, 0168, 0282,
0320
Elcit
0339
Electa
0348
ELECTRO TECH 0343
Electroband
0055, 0107
Electrograph
0176
Electrohome
0008, 0026, 0052,
0055
Element
0230
-1-
Elin
Elite
Elman
Elta
Emerson
Emprex
Envision
Epson
Erres
ESA
ESC
Etron
Eurofeel
Euro-Feel
Euroline
Euroman
Euromann
Europhon
Expert
Exquisit
Fenner
Ferguson
Fidelity
Filsai
Finlandia
Finlux
FIRST LINE
Firstline
Fisher
Flint
Formenti
Formenti/Phoenix
Fortress
Fraba
Friac
Frontech
Fujitsu
Fujitsu General
Fujitsu Siemens
Funai
Futuretech
Galaxi
Galaxis
Gateway
GBC
GE
Geant Casino
GEC
Geloso
General Technic
0277, 0320, 0323,
0342, 0349, 0350
0320, 0340, 0350
0341
0277, 0323, 0343
0000, 0007, 0008,
0012, 0013, 0019,
0026, 0031, 0037,
0051, 0058, 0059,
0161, 0179, 0320,
0339
0154
0008, 0026, 0050
0155, 0206, 0359
0320, 0349, 0350
0051
0282
0343
0282
0337
0349
0161, 0277, 0282
0320, 0337, 0342,
0350
0277, 0282, 0320,
0341, 0342, 0350
0321
0320
0323, 0343
0322, 0345, 0349
0277, 0320, 0342,
0346
0282
0346
0171, 0282, 0320,
0339, 0341, 0342,
0349, 0350
0342, 0343, 0350
0277, 0282, 0320,
0323
0019, 0161, 0282,
0339, 0342, 0344,
0351
0320, 0350
0171, 0277, 0336,
0339, 0342, 0349
0277
0336, 0339
0161, 0320
0161
0282, 0323, 0337,
0343, 0346, 0347
0059, 0069, 0074,
0075, 0282
0282
0504, 0505, 0507,
0510, 0511
0051, 0058, 0059,
0112, 0113, 0115,
0118, 0119, 0179,
0337
0058, 0179
0320, 0351
0161, 0320
0176, 0177, 0241
0323, 0343, 0344
0008, 0021, 0023,
0026, 0027, 0031,
0034, 0049, 0052,
0056, 0209
0321
0282, 0320, 0342,
0347, 0349, 0350
0323, 0343, 0346
0323, 0343
Genexxa
0320, 0340, 0347,
0350
GFM
0128, 0227
Giant
0282
Gibralter
0008, 0030, 0050,
0062
GoldHand
0277
Goldline
0320
GoldStar
0007, 0008, 0012,
0026, 0031, 0050,
0053, 0161, 0277,
0282, 0320, 0323,
0342, 0343, 0346,
0349, 0350
Goodmans
0246, 0272, 0282,
0320, 0323, 0337,
0343, 0344, 0349,
0350, 0462, 0473,
0477
Gorenje
0161, 0351
GPM
0340
GPX
0129
Gradiente
0240
Graetz
0347
Granada
0171, 0282, 0320,
0321, 0342, 0344,
0346, 0349, 0350
Grandin
0340, 0343, 0348,
0349
Gronic
0282
Grundig
0160, 0161, 0171,
0310, 0320
Grunpy
0058, 0059, 0179
Haier
0157, 0233
Halifax
0277, 0282, 0337,
0342
Hallmark
0008, 0026, 0031
Hampton
0277, 0282, 0342
Hanseatic
0161, 0168, 0282,
0320, 0323, 0342,
0343, 0344, 0349,
0350
Hantarex
0320, 0323, 0343
Hantor
0320
Harman/Kardon 0010
Harvard
0058, 0179
Harwood
0320, 0323
Havermy
0178
HCM
0282, 0320, 0323,
0337, 0342, 0343,
0348
Hema
0282, 0323
Hewlett Packard 0192
Higashi
0277
HiLine
0320
Hinari
0320, 0323, 0340,
0343, 0344, 0349,
0350
Hisawa
0321, 0340, 0348
Hisense
0247
Hitachi
0008, 0012, 0026,
0066, 0084, 0092,
0093, 0120, 0172,
0173, 0255, 0270,
0271, 0282, 0320,
0335, 0338, 0342,
0344, 0346, 0347,
0365, 0382, 0448,
0456, 0467
Hornyphon
0320, 0350
Hoshai
0340
Huanyu
0277, 0342
Hygashi
0277, 0282, 0342
Hyper
0277, 0282, 0323,
0342, 0343
Hypson
0282, 0320, 0321,
0337, 0342, 0348,
0349, 0350
Hyundai
0141
Iberia
0320
ICE
0277, 0282, 0320,
0323, 0337, 0340,
0342, 0343, 0350
ICeS
0277
Ilo
0148, 0153
IMA
0058
Imperial
0161, 0171, 0320,
0347, 0350, 0351
Indiana
0320, 0349, 0350
Infinity
InFocus
0010
0250, 0327, 0363,
0479, 0508
Ingelen
0347
Ingersol
0323, 0343
Initial
0153
Inno Hit
0171, 0282, 0320,
0323, 0340, 0342,
0343, 0349, 0350
Innovation
0337, 0343
Insignia
0131, 0228, 0236,
0238
Inteq
0030
Interactive
0161
Interbuy
0323, 0343
Interfunk
0161, 0320, 0339,
0347, 0349, 0350
International
0277
Intervision
0161, 0282, 0320,
0337, 0341, 0342
Irradio
0171, 0320, 0323,
0340, 0343, 0349,
0350
Isukai
0320, 0340
ITC
0282, 0342
ITS
0277, 0320, 0340,
0348, 0350
ITT
0343, 0347
ITV
0320, 0343, 0349
Janeil
0057
JBL
0010
JC Penney
0007, 0008, 0026,
0027, 0049, 0053,
0056
JCB
0055, 0107
Jensen
0008, 0026
JVC
0012, 0014, 0015,
0056, 0064, 0065,
0067, 0169, 0174,
0297, 0314, 0344,
0350, 0375
Kaisui
0277, 0282, 0320,
0323, 0340, 0342,
0343, 0348
Kamosonic
0342
Kamp
0277, 0342
Kapsch
0347
Karcher
0161, 0320, 0342,
0343, 0349
Kawasho
0008, 0026, 0055,
0277
KEC
0179
Kendo
0161, 0320, 0341,
0346
Kenwood
0008, 0026, 0050
KIC
0282
Kingsley
0277, 0342
KLH
0039
Kloss Novabeam 0057, 0058
Kneissel
0161, 0168, 0320
Kolster
0320, 0350
Konka
0340
Korpel
0320, 0349, 0350
Korting
0161, 0339
Kosmos
0320
Koyoda
0343
KTV
0007, 0050, 0058,
0179, 0183, 0282,
0342
Kyoto
0277, 0282
Lasat
0161
Lenco
0323, 0343
Lenoir
0323, 0342, 0343
Leyco
0320, 0337, 0349,
0350
LG
0031, 0053, 0066,
0116, 0117, 0140,
0161, 0164, 0175,
0195, 0269, 0277,
0282, 0300, 0309,
0317, 0320, 0323,
0328, 0342, 0343,
0346, 0349, 0350,
0366, 0368, 0377,
0466, 0471, 0478
LG/GoldStar
0164
Liesenk
0349
Liesenkotter
0320
Life
0337, 0343
Lifetec
0320, 0323, 0337,
0343
Lloyds
0323
Loewe
0161, 0168, 0265,
0320, 0330, 0352
Loewe Opta
0339, 0349, 0350
Logik
0054
Luma
0320, 0323, 0346,
0349
Lumatron
0282, 0320, 0346,
0349, 0350
Lux May
0350
Luxman
0008, 0026
Luxor
0282, 0342, 0346
LXI
0010, 0019, 0021,
0026, 0027, 0031,
0049, 0111
M Electronic
0342, 0343, 0345,
0347, 0349, 0350
MAG
0096
Magnadyne
0339, 0341, 0349
Magnafon
0171, 0277, 0341,
0342
Magnavox
0008, 0009, 0010,
0013, 0026, 0032,
0033, 0048, 0050,
0128, 0211, 0212,
0224, 0226, 0239
Magnum
0337, 0343
Majestic
0054
Mandor
0337
Manesth
0282, 0320, 0337,
0342, 0349, 0350
Marantz
0008, 0010, 0026,
0050, 0204, 0320,
0349, 0350
Marelli
0339
Mark
0277, 0282, 0320,
0323, 0349, 0350
Masuda
0282
Matsui
0282, 0320, 0323,
0342, 0343, 0344,
0346, 0349, 0350,
0455
Matsushita
0017
Maxent
0147, 0176
Mediator
0320, 0349, 0350
Medion
0320, 0337, 0343
Megapower
0140
Megatron
0026, 0031
MElectronic
0277, 0282, 0320,
0323
Melvox
0321
Memorex
0019, 0026, 0031,
0053, 0054, 0137,
0215, 0323, 0343
Memphis
0323, 0343
Mercury
0320, 0323
Metz
0339
MGA
0008, 0026, 0031,
0050, 0053
Micromaxx
0337, 0343
Microstar
0337, 0343
Midland
0007, 0021, 0023,
0027, 0030, 0056,
0062
Minerva
0171
Minoka
0320, 0350
Mintek
0153
Mitsubishi
0008, 0026, 0031,
0053, 0066, 0084,
0093, 0098, 0150,
0178, 0289, 0320,
0339, 0344, 0350,
0376
Mivar
0161, 0168, 0171,
0277, 0282, 0342
Monivision
0140
Montgomery Ward
0054
Motion
0171
Motorola
0052, 0178
MTC
0008, 0026, 0050,
0053, 0161, 0277
Multi System
0349
-2-
Multitech
Murphy
NAD
Naonis
NEC
Neckermann
NEI
Net-TV
Neufunk
New Tech
New World
NewTech
Nicamagic
Nikkai
Nikko
Nobliko
Nokia
Norcent
Nordic
Nordmende
Nordvision
Novatronic
Oceanic
Okano
Olevia
ONCEAS
Onwa
Opera
Oppo
Optimus
Optoma
Optonica
Orbit
Orion
Orline
Osaki
Oso
Otto Versand
Pael
Palladium
Palsonic
Panama
Panasonic
Panavision
Pathe Cinema
Pausa
Penney
Perdio
Perfekt
Philco
Philharmonic
Philips
0058, 0161, 0179,
0183, 0277, 0282,
0320, 0323, 0341,
0342, 0343, 0344,
0346, 0349
0277, 0342
0026, 0031, 0111
0346
0008, 0026, 0050,
0052, 0053, 0072,
0103, 0282, 0344
0161, 0282, 0320,
0339, 0342, 0346,
0349, 0350, 0351
0320, 0349, 0350
0176
0320, 0323
0343, 0350
0340
0282, 0320, 0323
0277, 0342
0277, 0282, 0320,
0323, 0337, 0340,
0342, 0349, 0350
0026, 0031, 0050
0171, 0277, 0341,
0342
0347
0201
0282
0339, 0345, 0347,
0350
0349
0320
0321, 0347
0161, 0320, 0351
0102, 0199, 0200,
0207, 0222
0342
0058, 0179
0320
0130
0017, 0019
0144
0178
0320, 0350
0043, 0146, 0283,
0320, 0323, 0328,
0343, 0349, 0350
0320
0282, 0320, 0337,
0340, 0342
0340
0282, 0320, 0336,
0342, 0344, 0348,
0349, 0350
0277, 0342
0161, 0282, 0320,
0342, 0351
0282
0277, 0282, 0320,
0323, 0337, 0342,
0343
0016, 0017, 0020,
0022, 0023, 0035,
0052, 0056, 0084,
0085, 0133, 0163,
0193, 0284, 0286,
0290, 0292, 0320,
0325, 0347, 0356
0320
0161, 0168, 0277,
0321, 0342
0323, 0343
0021, 0023, 0031,
0050, 0111
0277, 0320
0320
0008, 0009, 0010,
0012, 0026, 0050,
0052, 0053, 0161,
0171, 0320, 0339
0282, 0342
0008, 0009, 0010,
0011, 0012, 0032,
0048, 0049, 0052,
0122, 0128, 0134,
0186, 0187, 0213,
0221, 0224, 0226,
0239, 0256, 0257,
0259, 0261, 0263,
0267, 0280, 0281,
0287, 0296, 0299,
0301, 0303, 0305,
0313, 0319, 0320,
0324, 0333, 0339,
0342, 0349, 0350,
0353, 0357, 0360,
0380, 0383, 0452,
0459, 0460
Philips Magnavox 0011, 0032, 0033
Phoenix
0161, 0277, 0320,
0339, 0349, 0350
Phonola
0277, 0320, 0339,
0349, 0350
Pilot
0007, 0008, 0050
Pioneer
0008, 0026, 0094,
0095, 0161, 0320,
0345, 0347, 0349,
0350, 0458
Plantron
0320, 0323, 0337,
0350
Playsonic
0282
Polaroid
0039, 0142, 0202,
0234
Poppy
0323, 0343
Portland
0007, 0008, 0026,
0053
Prandoni-Prince 0171, 0346
Precision
0282, 0342
Prima
0157, 0243, 0323,
0343, 0347
Princeton
0140
Prism
0023, 0056
Profex
0323, 0343
Profi-Tronic
0320, 0350
Proline
0320, 0350
Proscan
0021, 0027, 0049
Prosonic
0161, 0277, 0282,
0320, 0342, 0349
Protech
0282, 0337, 0341,
0342, 0343, 0349,
0350
Proton
0008, 0012, 0026,
0031
Protron
0196
PROVIEW
0096, 0246
Provision
0320, 0349
Pulsar
0008, 0030, 0062
Pye
0256, 0320, 0349,
0350, 0378
Pymi
0323, 0343
Quandra Vision 0321
Quasar
0017, 0023, 0052,
0056
Quelle
0282, 0320, 0337,
0342, 0349, 0350
Questa
0344
Radialva
0320
RadioShack
0019, 0021, 0031,
0050, 0179, 0320
RadioShack/Realistic
0007, 0008, 0012,
0026, 0049, 0058
Radiola
0282, 0320, 0349,
0350
Radiomarelli
0320, 0339
Radiotone
0161, 0320, 0323,
0350
Rank
0344
RCA
0008, 0021, 0024,
0025, 0026, 0027,
0042, 0049, 0052,
0053, 0063, 0136,
0225
Realistic
0019, 0031, 0050,
0179
Recor
0320
Redstar
0320
Reflex
0320
Revox
0161, 0320, 0349,
0350
Rex
0337, 0346, 0347
RFT
0161, 0168, 0339
Rhapsody
0277
R-Line
0320, 0349, 0350
Roadstar
0323, 0337, 0340,
0343
Robotron
Rowa
Royal Lux
RTF
Runco
Saba
0339
0277, 0282
0161
0339
0030, 0050, 0062
0298, 0322, 0339,
0345, 0347
Saisho
0282, 0323, 0337,
0342, 0343
Salora
0346, 0347
Sambers
0171, 0341
Sampo
0007, 0008, 0026,
0050, 0176
Samsung
0004, 0005, 0006,
0007, 0008, 0012,
0026, 0031, 0036,
0050, 0053, 0076,
0077, 0079, 0114,
0124, 0125, 0126,
0127, 0139, 0161,
0183, 0185, 0190,
0191, 0258, 0264,
0277, 0282, 0320,
0323, 0334, 0337,
0342, 0343, 0349,
0350, 0351, 0373,
0453, 0468
Sandra
0277, 0282, 0342
Sansui
0043, 0109, 0320,
0350
Sanyo
0008, 0019, 0068,
0070, 0071, 0099,
0161, 0168, 0223,
0237, 0277, 0282,
0288, 0295, 0323,
0342, 0344, 0369,
0469
SBR
0320, 0349
Sceptre
0235, 0244
Schaub Lorenz 0347
Schneider
0282, 0316, 0318,
0320, 0333, 0340,
0342, 0349, 0350,
0382
Scotch
0026, 0031
Scott
0008, 0012, 0026,
0031, 0058, 0059,
0149, 0179
Sears
0008, 0010, 0019,
0021, 0026, 0027,
0031, 0049, 0051,
0059, 0111
SEG
0277, 0282, 0320,
0323, 0337, 0341,
0342, 0344, 0349,
0382
SEI
0320
SEI-Sinudyne 0339, 0341, 0347
Seleco
0344, 0346, 0347
Sencora
0323, 0343
Sentra
0323
Serino
0277
Sharp
0000, 0001, 0002,
0003, 0007, 0008,
0012, 0026, 0060,
0088, 0089, 0091,
0138, 0165, 0170,
0178, 0198, 0229,
0262, 0278, 0279,
0291, 0308, 0312,
0336, 0344, 0354,
0370, 0449, 0450,
0451, 0464, 0474,
0476
Sheng Chia
0178
Shogun
0008
Siarem
0320, 0339, 0341
Sierra
0320, 0350
Siesta
0161
Signature
0054
Silva
0277
Silver
0344
Singer
0321, 0339, 0341
Sinudyne
0320, 0339, 0341,
0349
Skantic
0347
Solavox
0347
Sonitron
0161, 0282
Sonoko
0282, 0320, 0323,
0337, 0342, 0343,
0349, 0350
Sonolor
0321, 0347
Sontec
0161, 0320, 0349,
0350
Sony
0038, 0044, 0045,
0047, 0055, 0104,
0105, 0107, 0110,
0123, 0184, 0220,
0248, 0249, 0251,
0252, 0254, 0326,
0343, 0344, 0371,
0374, 0457, 0475
Sound & Vision 0340, 0341
Soundesign
0008, 0026, 0031,
0058, 0059, 0179
Soundwave
0320, 0349, 0350
Squareview
0051
SSS
0008, 0058, 0179
Standard
0282, 0320, 0323,
0340, 0342, 0343,
0350
Starlite
0058, 0179, 0320,
0323, 0349
Stenway
0348
Stern
0346, 0347
Strato
0320, 0323
Stylandia
0282
Sunkai
0343
Sunstar
0320, 0323
Sunwood
0320, 0323, 0343,
0350
Superla
0277, 0282, 0342
Superscan
0013, 0178
SuperTech
0277, 0320, 0323
Supra
0323, 0343
Supre-Macy
0057
Supreme
0055, 0107
Susumu
0340
Sutron
0323, 0343
SVA
0151
Sydney
0277, 0282, 0342
Sylvania
0008, 0009, 0010,
0011, 0013, 0026,
0048, 0050, 0051,
0128, 0227, 0253
Symphonic
0051, 0058, 0062,
0128, 0179, 0215
Syntax
0199
Syntax-Brillian 0199
Sysline
0349
Sytong
0277
Tandy
0178, 0282, 0336,
0340, 0342, 0347
Tashiko
0277, 0282, 0342,
0344, 0346
Tatung
0052, 0177, 0282,
0320, 0342, 0349,
0350
TCM
0337, 0343
Teac
0282, 0320
Tec
0282, 0323, 0342,
0343
Technics
0017, 0023, 0056
TechniSat
0274, 0496, 0497,
0499
Techwood
0008, 0023, 0026,
0056
TEDELEX
0282
Teknika
0007, 0008, 0010,
0012, 0026, 0053,
0054, 0058, 0059,
0179
Teleavia
0345
Telecor
0282, 0320
Telefunken
0320, 0322, 0345,
0350
Telegazi
0320
Telemeister
0320
Telesonic
0320
Telestar
0320
Teletech
0320, 0323, 0343,
0349
Teleton
0282, 0342
Televideon
0277
Televiso
0321
Tensai
0282, 0320, 0323,
0340, 0343, 0350
-3-
Tesmet
Tevion
Texet
0350
0337, 0343
0277, 0282, 0323,
0342
Thomson
0162, 0188, 0189,
0285, 0320, 0322,
0342, 0345, 0350
Thorn
0320, 0349
TMK
0008, 0026, 0031
TNCi
0030
Tokai
0282, 0320, 0350
Tokyo
0277, 0342
Tomashi
0348
Toshiba
0018, 0019, 0040,
0041, 0046, 0073,
0100, 0103, 0108,
0109, 0111, 0121,
0132, 0166, 0208,
0210, 0214, 0217,
0260, 0268, 0282,
0283, 0293, 0304,
0306, 0307, 0329,
0344, 0355, 0454
Totevision
0007
Towada
0282, 0347
Trakton
0282
Trans Continens 0282, 0320
Transtec
0277
Trident
0282
Triumph
0320
Uher
0161, 0171, 0320,
0347, 0350
Ultravox
0277, 0320, 0339,
0341, 0342
Unic Line
0320
United
0349
Universum
0161, 0171, 0282,
0320, 0337, 0349,
0350, 0351
Univox
0320
Vector Research 0050
Vestel
0282, 0320, 0346,
0347, 0349, 0350,
0351
Vexa
0320, 0323, 0343,
0349
Victor
0015, 0344, 0350
VIDEOLOGIC 0277
Videologique
0277, 0282, 0340,
0342
VideoSystem
0320, 0350
Videotechnic
0277, 0282
Vidikron
0010
Vidtech
0008, 0026, 0031,
0053
Viewsonic
0176, 0203, 0232,
0364
Viking
0057
Viore
0148
Visiola
0277, 0342
Vision
0282, 0320, 0350
Vizio
0008, 0177, 0218,
0242, 0500, 0501,
0502, 0503, 0506
Vortec
0320, 0349, 0350
Voxson
0171, 0320, 0339,
0346, 0347, 0350
Waltham
0282, 0320, 0342
Wards
0008, 0009, 0010,
0026, 0031, 0048,
0049, 0050, 0053,
0054, 0059
Watson
0320, 0349, 0350
Watt Radio
0277, 0341, 0342
Waycon
0111
Wega
0320, 0339, 0344
Wegavox
0323
Weltblick
0282, 0320, 0349,
0350
Westinghouse 0107, 0216, 0220
White Westinghouse
0037, 0090, 0277,
0320, 0341, 0342,
0349
Wincom
0101, 0106
Xrypton
0320
Yamaha
Yamishi
Yokan
Yoko
Yorx
Zanussi
Zenith
0008, 0026, 0050,
0053, 0080, 0081,
0082, 0083, 0086,
0087
0282, 0320
0320
0161, 0277, 0282,
0320, 0323, 0337,
0340, 0342, 0343,
0349, 0350
0340
0282, 0346
0008, 0028, 0029,
0030, 0031, 0054,
0061, 0062
VCR
ABS
Adventura
Adyson
Aiwa
1016
1069
1008
1024, 1026, 1027,
1069
Akai
1021, 1027
Akiba
1008, 1029
Akura
1008, 1027, 1029
Alba
1008, 1009, 1024,
1025, 1029, 1030
Alienware
1016
Ambassador
1030
American High 1068
Amstrad
1008, 1009, 1026
Anitech
1008, 1029
Apex
1088
ASA
1028, 1031
Asha
1070
Asuka
1008, 1026, 1028,
1029, 1031
Audio Dynamics 1064
Audiosonic
1009
Audiovox
1071
Baird
1009, 1025, 1026,
1027
Bang & Olufsen 1017
Basic Line
1008, 1009, 1024,
1025, 1029, 1030
Baur
1028
Beaumark
1070
Bell & Howell 1065
Bestar
1009, 1025, 1030
Black Panther Line
1009, 1025
Blaupunkt
1028
Bondstec
1008, 1030
Broksonic
1100
Bush
1008, 1009, 1024,
1025, 1029, 1049,
1051, 1063, 1217
Calix
1071
Candle
1070, 1071
Canon
1068
Cathay
1009
Catron
1030
CGE
1026, 1027
Cimline
1008, 1024, 1029
CineVision
1104
Citizen
1070, 1071
Clatronic
1008, 1030
Colortyme
1064
Condor
1009, 1025, 1030
Craig
1070, 1071
Crown
1008, 1009, 1025,
1029, 1030
Curtis Mathes 1064, 1068, 1070
Cybernex
1070
CyberPower
1016
Daewoo
1009, 1025, 1030,
1038, 1069, 1223
Dansai
1008, 1009, 1029
Dantax
1024
Daytron
1009, 1025
DBX
1064
De Graaf
1028
Decca
1026, 1027, 1028
Dell
1016
Denko
1008
DiamondVision 1096
DigiFusion
1014
DIRECTV
1019, 1105, 1110,
1111, 1113, 1116,
1122
Dish Network 1018
Dishpro
1018
Dual
1009, 1027, 1028
Dumont
1026, 1028
Durabrand
1114
Dynatech
1069
Echostar
1018
Elbe
1009
Elcatech
1008
Electrohome
1071
Electrophonic 1071
Elsay
1008
Elta
1008, 1009, 1029
Emerson
1008, 1020, 1068,
1069, 1071
ESC
1009, 1025
Etzuko
1008, 1029
Expressvu
1018
Ferguson
1027
Fidelity
1008, 1026
Finlandia
1028
Finlux
1026, 1027, 1028
Firstline
1008, 1024, 1029,
1031
Fisher
1065
Flint
1024
Formenti/Phoenix 1028
Frontech
1030
Fuji
1068
Fujitsu
1026
Funai
1026, 1069
Galaxy
1026
Garrard
1069
Gateway
1016
GBC
1029, 1030
GE
1068, 1070
GEC
1028
Geloso
1029
General
1030
General Technic 1024
GOI
1018
GoldHand
1008, 1029
Goldstar
1026, 1031, 1064,
1071
Goodmans
1008, 1009, 1025,
1026, 1029, 1030,
1031
Gradiente
1069
Graetz
1027
Granada
1028
Grandin
1008, 1009, 1025,
1026, 1029, 1030,
1031
Grundig
1028, 1029
Hanseatic
1009, 1028, 1031
Harley Davidson 1069
Harman/Kardon 1064
Harwood
1008
HCM
1008, 1029
Headquarter
1065
Hewlett Packard 1016
Hinari
1008, 1009, 1024,
1029
Hisawa
1024
Hitachi
1011, 1026, 1027,
1028, 1046, 1062
HNS
1110
Howard Computers
1016
HP
1016
HTS
1018
Hughes
1111, 1113, 1122
Hughes Network Systems
1110, 1116
Humax
1012, 1110, 1113
Hush
1016
Hypson
1008, 1009, 1024,
1029
iBUYPOWER 1016
Impego
1030
Imperial
1026
Inno Hit
1008, 1009, 1025,
1028, 1029, 1030
Innovation
1024
Instant Replay 1068
Interbuy
1008, 1031
Interfunk
Intervision
Irradio
ITT
ITV
JC Penney
1028
1009, 1026
1008, 1029, 1031
1027
1009, 1025, 1031
1064, 1065, 1068,
1070, 1071
JCL
1068
JVC
1007, 1018, 1027,
1039, 1064, 1065,
1066, 1067, 1078,
1089, 1092, 1093,
1094, 1095, 1113,
1208, 1209, 1212,
1213, 1215, 1218
Kaisui
1008, 1029
Karcher
1028
Kendo
1008, 1024, 1025,
1030
Kenwood
1027, 1064, 1065
Kodak
1068, 1071
Korpel
1008, 1029
Kyoto
1008
Lenco
1025
Leyco
1008, 1029
LG
1010, 1026, 1031,
1047, 1054, 1056,
1071, 1103, 1221
Lifetec
1024
Linksys
1016
Lloyd's
1069
Loewe Opta
1028, 1031
Logik
1008, 1029
Lumatron
1009, 1025
Luxor
1008
LXI
1071
M Electronic
1026
Magnavox
1020, 1068, 1114,
1126
Magnin
1071
Manesth
1008, 1029
Marantz
1028, 1064, 1065,
1068
Mark
1009
Marta
1071
Matsui
1024, 1031
Matsushita
1068
Media Center PC 1016
Mediator
1028
Medion
1024
MEI
1068
Memorex
1023, 1026, 1031,
1065, 1068, 1069,
1070, 1071, 1098,
1114
Memphis
1008, 1029
MGN Technology 1070
Micromaxx
1024
Microsoft
1016
Microstar
1024
Migros
1026
Mind
1016
Mitsubishi
1026, 1028, 1079
Motorola
1068
MTC
1070
Multitech
1008, 1026, 1028,
1029, 1030, 1069,
1070
Murphy
1026
NEC
1027, 1064, 1065
Neckermann
1027, 1028
NEI
1028
Nesco
1008, 1029
Nikkai
1008, 1009, 1030
Nikko
1071
Niveus Media 1016
Noblex
1070
Nokia
1009, 1027
Nordmende
1027
Northgate
1016
Oceanic
1026, 1027
Okano
1008, 1009, 1024
Olympus
1068
Optimus
1071
Orion
1023, 1024, 1051,
1115, 1217
Orson
1026
Osaki
1008, 1026, 1029,
1031
-4-
Otto Versand
Palladium
1028
1008, 1027, 1029,
1031
Panasonic
1000, 1022, 1044,
1055, 1068, 1072,
1085, 1090, 1091,
1120, 1121, 1214
Pathe Marconi 1027
Perdio
1026
Philco
1008, 1068
Philips
1006, 1013, 1028,
1035, 1040, 1045,
1046, 1050, 1058,
1059, 1061, 1068,
1076, 1101, 1110,
1113, 1116, 1117,
1122, 1126, 1210,
1211
Philips Magnavox 1076
Phonola
1028
Pilot
1071
Pioneer
1028, 1036
Polaroid
1088, 1099
Portland
1009, 1025, 1030
Prinz
1026
Profex
1029
Proline
1026
Proscan
1019
Prosonic
1009, 1024
Pulsar
1114
Pye
1028, 1102
Quarter
1065
Quartz
1065
Quasar
1068
Quelle
1026, 1028
Radialva
1008
RadioShack
1071
RadioShack/Realistic
1065, 1068, 1069,
1070, 1071
Radiola
1028
Radix
1071
Randex
1071
RCA
1019, 1068, 1070,
1075, 1110, 1113,
1122, 1125
Realistic
1065, 1068, 1069,
1070, 1071
ReplayTV
1022, 1123
Rex
1027
RFT
1008, 1028, 1030
Ricavision
1016
Roadstar
1008, 1009, 1025,
1029, 1031
Royal
1008
Runco
1114
Saba
1027
Saisho
1024, 1029
Samsung
1002, 1034, 1041,
1043, 1057, 1060,
1070, 1084, 1110,
1116, 1122, 1124,
1220, 1222
Samurai
1008, 1030
Sanky
1114
Sansui
1023, 1027, 1106,
1115
Sanyo
1032, 1065, 1070
Saville
1009
SBR
1028
Schaub Lorenz 1026, 1027
Schneider
1008, 1009, 1024,
1025, 1026, 1028,
1029, 1030, 1031
Sears
1065, 1068, 1071
SEG
1008, 1009, 1029
SEI-Sinudyne 1028
Seleco
1027
Sentra
1008, 1030
Sentron
1008, 1029
Sharp
1003, 1033, 1077,
1107, 1127, 1219
Shintom
1008, 1029
Shivaki
1031
Shogun
1070
Siemens
1031
Silva
1031
Silver
1009
Singer
1068
Sinudyne
Solavox
Sonic Blue
Sonneclair
Sonoko
Sontec
Sony
1028
1030
1022, 1123
1008
1009, 1025
1031
1001, 1016, 1048,
1053, 1073, 1074,
1080, 1081, 1082,
1083, 1108, 1118,
1216
Stack
1016
Stack 9
1016
Standard
1009, 1025
Stern
1009
STS
1068
Sunkai
1024
Sunstar
1026
Suntronic
1026
Sunwood
1008, 1029
Superscan
1020
Sylvania
1020, 1068, 1069,
1102, 1126
Symphonic
1008, 1069, 1126
Systemax
1016
Tagar Systems 1016
Taisho
1024
Tandberg
1009
Tandy
1065
Tashiko
1026, 1071
Tatung
1026, 1027, 1028
TCM
1015, 1024, 1042
Teac
1009, 1069
Tec
1008, 1009, 1030
Technics
1068
Teknika
1068, 1069, 1071
Teleavia
1027
Telefunken
1027
Teletech
1008, 1009
Tenosal
1008, 1029
Tensai
1008, 1026, 1029,
1031
Tevion
1024
Thomson
1005, 1027
Thorn
1027
Tivo
1108, 1110, 1111,
1113, 1117, 1118,
1119, 1122
TMK
1070
Tokai
1008, 1029, 1031
Tonsai
1029
Toshiba
1004, 1016, 1027,
1028, 1037, 1049,
1052, 1086, 1087,
1097, 1109, 1112,
1194
Totevision
1070, 1071
Touch
1016
Towada
1008, 1029
Towika
1008, 1029
TVA
1030
Uher
1031
UltimateTV
1019
Ultravox
1009
Unitech
1070
United Quick Star 1009, 1025
Universum
1026, 1028, 1031
Vector Research 1064
Video Concepts 1064
Videon
1024
Videosonic
1070
Viewsonic
1016
Voodoo
1016
Wards
1068, 1069, 1070,
1071
Weltblick
1031
XR-1000
1068, 1069
Yamaha
1064, 1065
Yamishi
1008, 1029
Yokan
1008, 1029
Yoko
1008, 1029, 1030,
1031
Zenith
1114
ZT Group
1016
DVD
4Kus
2051
Accurian
Advent
AEG
Airis
Aiwa
Akai
2142
2155, 2251
2362
2364
2322
2145, 2177, 2179,
2248
Akura
2356
Alba
2064, 2165, 2186,
2337, 2346
Alco
2149
Alize
2361
Allegro
2133
Amitech
2362
Amphion MediaWorks
2195
AMW
2195, 2363
Apex
2030, 2124, 2125,
2126, 2127, 2130,
2131
Apple
2241
Arrgo
2138
Asono
2364
Aspire
2152, 2222
Astar
2240
ATACOM
2364
Audiovox
2061, 2149
Avious
2367
Awa
2363
Axion
2249
Bang & Olufsen 2128
Baze
2367
BBK
2364
Bellagio
2363
Best Buy
2359
Blaupunkt
2131
Blue Parade
2157
Boghe
2382
Brainwave
2362
Brandt
2148, 2188
Broksonic
2145, 2146
Bush
2064, 2110, 2170,
2268, 2290, 2346,
2358, 2367, 2383
California Audio Labs
2151
Cambridge Audio 2354
CAT
2352, 2353
CAVS
2192
Centrum
2353
CGV
2354, 2362
Changhong
2140
Cinetec
2363
CineVision
2133, 2237
Clatronic
2358, 2367
Coby
2031, 2046, 2360
Conia
2383
Continental Edison
2363
Crown
2362
C-Tech
2355
Curtis Mathes 2139
CVG
2377
CyberHome
2022, 2098, 2138,
2187, 2336
Cytron
2244
Daenyx
2363
Daewoo
2001, 2133, 2276,
2298, 2330, 2362,
2363, 2377
Daewoo International
2363
Dalton
2357
Dansai
2362, 2381
Daytek
2184, 2195, 2363
Dayton
2363
DEC
2358
Decca
2362
Denon
2059, 2151, 2193,
2332
Denver
2356, 2358, 2360,
2370
Denzel
2380
Desay
2205
Diamond
2354, 2355
DiamondVision 2225, 2232
Disney
2010, 2028
DK Digital
2339
Dmtech
2176
Dual
2380
Durabrand
2136
DVX
2355
Easy Home
2359
Eclipse
2354
E-Dem
2364
Electrohome
2362
Elin
2362
Elta
2341, 2361, 2362
Emerson
2129, 2137, 2150
Enterprise
2129
Enzer
2380
Epson
2247
ESA
2137
Finlux
2354, 2362, 2367
Fintec
2377
Fisher
2134
Funai
2137
Gateway
2051
GE
2029, 2131, 2156
Gericom
2351
GFM
2226
Giec
2382
Global Solutions 2355
Global Sphere 2355
Go Video
2133, 2213
Goodmans
2165, 2280, 2291,
2358, 2371, 2376,
2382
GPX
2227
Gradiente
2151
Graetz
2380
Greenhill
2131
Grundig
2349
Grunkel
2362, 2366
GVG
2377
H&B
2358
H_her
2364
Haaz
2354, 2355
Haier
2254
Harman/Kardon 2047, 2135
HiMAX
2359
Hitachi
2062, 2090, 2115,
2274, 2282, 2316,
2359, 2380
Hiteker
2130
Home Tech Industries
2364
Hyundai
2366
Ilo
2245
Initial
2131, 2245
Innovation
2182
Insignia
2002, 2137, 2253
Integra
2157
Irradio
2053
iSymphony
2246
JBL
2135
JVC
2020, 2096, 2097,
2099, 2100, 2101,
2102, 2103, 2106,
2107, 2160, 2257,
2260, 2262, 2263,
2321, 2324, 2326,
2327, 2343, 2464,
2465, 2468, 2469,
2471
Jwin
2198
Kansai
2360
Kawasaki
2149
Kennex
2362
Kenwood
2041, 2151, 2348
KeyPlug
2362
Kiiro
2362
Kingavon
2358
Kiss
2380
KLH
2131, 2149
Koda
2358
Koss
2013, 2148, 2158
KXD
2359
Landel
2143
Lasonic
2132
Lawson
2355
Lecson
2381
Lenco
2358, 2362, 2367
Lenoxx
2136, 2153
-5-
LG
Life
Lifetec
Limit
Liquid Video
Liteon
Loewe
LogicLab
Magnavox
Magnex
Majestic
Marantz
Marquant
Matsui
McIntosh
Mecotek
Medion
Memorex
MiCO
Micromaxx
Microsoft
Microstar
Minoka
Minowa
Mintek
Mitsubishi
Mizuda
Monyka
Mustek
Mx Onda
Mystral
Naiko
Nesa
Neufunk
Nevir
Next Base
Nexxtech
NU-TEC
Onkyo
Oopla
Oppo
Optim
Optimus
Orava
Orbit
Orion
Oritron
P&B
Pacific
Panasonic
Parasound
peeKTON
Philips
Phonotrend
Pioneer
2002, 2033, 2038,
2057, 2129, 2133,
2189, 2191, 2223,
2238, 2270, 2288,
2335, 2373, 2375
2182
2182
2355
2158
2043, 2051, 2142
2320
2355
2025, 2050, 2137,
2150, 2159, 2224,
2230, 2358
2367
2360
2328
2362
2148, 2378
2199
2362
2182
2028, 2145, 2234
2354, 2382
2182
2156
2182
2362
2367
2131, 2245
2003
2358, 2359
2380
2186
2354
2366
2362
2131
2380
2362
2143
2243
2383
2159, 2368
2051
2196, 2255
2381
2180
2358
2363
2073, 2110
2148, 2158
2358
2355
2011, 2024, 2034,
2042, 2058, 2062,
2066, 2067, 2093,
2116, 2117, 2118,
2119, 2120, 2121,
2122, 2123, 2151,
2159, 2164, 2166,
2167, 2172, 2173,
2175, 2209, 2214,
2275, 2277, 2278,
2281, 2282, 2283,
2301, 2374, 2470
2197
2364
2008, 2012, 2025,
2044, 2050, 2051,
2053, 2060, 2072,
2108, 2111, 2147,
2159, 2163, 2169,
2174, 2181, 2185,
2230, 2261, 2266,
2267, 2286, 2287,
2289, 2295, 2300,
2302, 2317, 2328,
2338, 2342, 2350,
2467
2367
2016, 2017, 2018,
2019, 2035, 2092,
2094, 2095, 2109,
2157, 2180, 2190,
2212, 2269, 2272,
2299, 2304, 2305,
2306, 2307, 2308,
2309, 2310, 2311,
2344, 2345, 2347,
2379
Pointer
2362
Polaroid
2125, 2215, 2235
Portland
2362
Powerpoint
2363
Prima
2252
Proceed
2130
Proscan
2156
Prosonic
2360, 2377
Protron
2202
Provision
2358
Pye
2144
Qwestar
2148
Raite
2380
RCA
2021, 2029, 2104,
2105, 2131, 2149,
2156, 2157, 2229
RedStar
2356, 2360, 2362
Regent
2153
Reoc
2355
Rimax
2361
Rio
2133
Roadstar
2331, 2358
Ronin
2363
Rotel
2203
Rowa
2154, 2383
Rownsonic
2353
Saba
2148, 2188
Sabaki
2355
Saivod
2362
Sampo
2141
Samsung
2000, 2045, 2077,
2112, 2113, 2114,
2115, 2151, 2200,
2216, 2219, 2228,
2264, 2265, 2271,
2279, 2294, 2303,
2329, 2365
Sansui
2073, 2145, 2354,
2355, 2362
Sanyo
2134, 2145, 2217,
2292
ScanMagic
2186
Schaub Lorenz 2362
Schneider
2176
Scientific Labs 2355
Scott
2161, 2357
Seeltech
2364
SEG
2162, 2355, 2363,
2380
Sharp
2006, 2040, 2088,
2091, 2182, 2194,
2220, 2221, 2231,
2236, 2293, 2340
Shinsonic
2245
Sigmatek
2359, 2364
Silva
2356
Singer
2354, 2355
Skymaster
2325, 2355
Skyworth
2356
Slim Art
2362
SM Electronic 2355
Sonic Blue
2133
Sontech
2366
Sony
2004, 2005, 2007,
2009, 2014, 2015,
2023, 2026, 2027,
2052, 2068, 2069,
2070, 2071, 2074,
2075, 2084, 2085,
2087, 2168, 2171,
2208, 2210, 2211,
2258, 2273, 2284,
2285, 2312, 2313,
2314, 2315, 2318,
2319, 2466
Soundmaster
2355
Soundmax
2355
Spectra
2363
Spectroniq
2201
Standard
2355
Star Cluster
2355
Starmedia
2358, 2364
Sungale
2204
Sunkai
2362
Superscan
2150
Supervision
2355
Sylvania
2012, 2137, 2150,
2178, 2230, 2239
Symphonic
2108, 2230
Synn
2355
T.D.E. Systems 2366
Tatung
2001, 2362
TCM
2182, 2297
Teac
2149, 2333, 2355,
2383
Tec
2356
Technics
2151
Technika
2362, 2367
Telefunken
2353
Tensai
2362
Tevion
2182, 2355, 2357
Theta Digital
2157
Thomson
2183, 2188, 2334,
2372
Tokai
2356, 2380
Top Suxess
2364
Toshiba
2032, 2036, 2037,
2039, 2048, 2049,
2054, 2055, 2072,
2073, 2076, 2078,
2079, 2086, 2145,
2159, 2218, 2233,
2256, 2259, 2296,
2369
TRANScontinents 2363, 2367
Transonic
2367
Trio
2362
Trutech
2242
TruVision
2359
TSM
2364
Umax
2361
United
2367
Urban Concepts 2159
US Logic
2245
Venturer
2149
Viewmaster
2364
Vocopro
2206
VocoStar
2207
Waitec
2364
Welltech
2382
Westinghouse 2063, 2250
Wharfedale
2354, 2355
Woxter
2361, 2364
Xbox
2156, 2183
Xlogic
2355, 2362
XMS
2362
Xoro
2382
Yamada
2051, 2361, 2363
Yamaha
2056, 2064, 2065,
2080, 2081, 2082,
2083, 2089, 2118,
2151, 2323
Yamakawa
2363, 2380
Yukai
2186
Zenith
2002, 2129, 2133,
2159, 2223
Blu-ray Disc
LG
Panasonic
Pioneer
Samsung
Sharp
Sony
Yamaha
2033
2011, 2209, 2214
2212
2045, 2113
2194, 2220, 2221
2075
2064, 2474
DVR
Bush
Hitachi
Panasonic
Philips
Pioneer
RCA
Samsung
Sharp
Sony
Toshiba
Yamaha
2110
2090
2066, 2067, 2093,
2116, 2117, 2119,
2120, 2122, 2123
2108, 2111
2016, 2017, 2018,
2019, 2092, 2094,
2095, 2109
2105
2113, 2219
2088, 2091
2084, 2085, 2087
2086
2089, 2118
DVD Recorder
Aspire
Astar
Broksonic
Go Video
Hitachi
Insignia
Irradio
JVC
LG
Liteon
Panasonic
Philips
Pioneer
Pye
Samsung
Sansui
Sanyo
Sony
Sylvania
Toshiba
Yamaha
2222
2240
2146
2213
2062
2002
2053
2100, 2101, 2106,
2107
2033, 2057, 2223,
2238
2043
2011, 2034, 2058,
2062, 2116, 2117,
2119, 2120, 2121,
2123
2008, 2044, 2050,
2051, 2147
2017, 2035
2144
2000, 2112, 2216
2073
2217
2004, 2005, 2007,
2052, 2068, 2069,
2074, 2208, 2210,
2211
2239
2032, 2036, 2037,
2039, 2049, 2054,
2055, 2076
2056
Cable
ABC
3002, 3003, 3017,
3066, 3067, 3086,
3093, 3119, 3122
ADB
3020
Adelphia
3081
Alcatel
3016
Americast
3124
Amstrad
3022, 3098
Antronix
3065, 3070
Archer
3070
Arcon
3098
AT&T
3095
Axis
3098
Bell South
3124
Cable Vision
3092
Cabletenna
3065
Cabletime
3104
Cableview
3087
Clearmaster
3127
ClearMax
3127
Clyde Cablevision 3105
Colour Voice
3068
Comcast
3084, 3088, 3117
Comcrypt
3107
Comtronics
3069
Contec
3074
Coolmax
3127
COX
3084
Cryptovision
3110
Director
3084
Eastern
3075
Everquest
3123
Fidelity
3098
Filmnet
3107
Filmnet Cablecrypt
3111
Filmnet Comcrypt
3111
Finlux
3097
Focus
3126
Foxtel
3022
France Telecom 3100, 3101
Freebox
3023
GC Electronics 3070
GE
3066, 3093
GEC
3105
Gemini
3072, 3123
General Instrument
3017, 3025, 3066,
3084, 3090, 3096,
3117
-6-
Goldstar
Gooding
Grundig
Hamlin
Hirschmann
Hitachi
HomeChoice
Humax
ITT Nokia
Jasco
Jerrold
3120
3099
3098, 3099
3073, 3078
3097
3066
3106
3021, 3080, 3083
3097
3123
3017, 3018, 3025,
3066, 3072, 3084,
3090, 3096, 3119,
3123
JVC
3099
Kabel Deutschland
3024, 3027, 3121
Macab
3101
Magnavox
3079
Maspro
3099
Matsui
3099
MegaCable
3117
Memorex
3076, 3122
Minerva
3099
Mnet
3107
Motorola
3025, 3026, 3084,
3088, 3090, 3095,
3117
Movie Time
3077, 3109
Mr Zapp
3101
Multichoice
3107
Multitech
3127
NEC
3064
NET Brazil
3085
Nokia
3097
Noos
3101
NSC
3077
Oak
3074
Pace
3006, 3089, 3121
Palladium
3099
Panasonic
3112, 3118, 3122
Paragon
3122
Philips
3068, 3071, 3079,
3099, 3100, 3101,
3103
Pioneer
3001, 3006, 3094,
3098, 3114, 3116,
3120
Popular Mechanics
3126
Proscan
3066, 3093
Pulsar
3122
PVP Stereo Visual Matrix
3018
Quasar
3122
RadioShack
3123, 3127
RCA
3030, 3031, 3087,
3118
Realistic
3070
Recoton
3126
Regal
3078
Regency
3075
Rembrandt
3066
Runco
3122
Sagem
3101
Samsung
3069, 3089, 3114,
3120
SAT
3098
Scientific Atlanta 3000, 3001, 3002,
3003, 3006, 3028,
3029, 3081, 3086,
3089, 3094, 3095,
3108
Signal
3072, 3123
Signature
3066
Sony
3092, 3125
Sprucer
3118
Standard Component
3115
Starcom
3017, 3072, 3119,
3123
Stargate
3072, 3123
Starquest
3072, 3123
Supercable
3090
Supermax
3127
Tele+1
3107, 3111
Telepiu
3107
Thomson
3082, 3091
TIME WARNER 3084
Tocom
Torx
Toshiba
Tristar
Tudi
Tusa
TV86
Unika
United Cable
Universal
Universum
V2
Videoway
View Star
Viewmaster
Vision
Visiopass
Vortex View
Wittenberg
Zenith
Zentek
3067
3017
3122
3127
3102
3072, 3123
3077
3065, 3070
3018, 3119
3065, 3070
3097, 3099
3127
3019
3074, 3077, 3079
3127
3127
3097, 3100, 3101
3127
3098
3113, 3122, 3124
3126
Satellite
AB Sat
AccessHD
ADB
AGS
Akai
Alba
4216, 4217
4104
4220
4216
4053, 4055
4001, 4004, 4006,
4007, 4062, 4217
Aldes
4005, 4007, 4010
Allsat
4048, 4053, 4055
Allsonic
4005, 4008, 4024
Alltech
4217
Alpha
4053
Alpha Digital
4104
Alphastar
4077
Amitronica
4217
Amstrad
4011, 4035, 4217,
4218
Anglo
4217
Ankaro
4005, 4008, 4024,
4217
Anttron
4001, 4004
Apollo
4001
Armstrong
4011, 4053
Artec
4100
Asat
4053, 4055
ASLF
4217
Astacom
4216
Astra
4009, 4011, 4054,
4217, 4219
Astro
4004, 4008, 4010,
4015, 4024, 4213,
4218, 4219
AudioTon
4004, 4048
Aurora
4222
Austar
4222
Axiel
4216
Axis
4008, 4009, 4024,
4050
Best
4008, 4024
Blaupunkt
4015
Blue Sky
4217
Boca
4011, 4054, 4059,
4217
Boston
4216
Brain Wave
4013
Broadcast
4012
Broco
4217
BSkyB
4035, 4041
BT
4216
Bubu Sat
4217
Bush
4006, 4045
Cambridge
4218
Canal Satellite 4213
Canal+
4213
CaptiveWorks 4099
Channel Master 4007, 4110
Chaparral
4075
CHEROKEE
4216
Chess
4212, 4217
CityCom
4006, 4215, 4219
Clatronic
4013
CNT
4010
Comag
4080, 4081, 4082,
4083, 4086
Commlink
Comtech
Condor
Connexions
Conrad
4005
4050
4008, 4024, 4219
4014, 4024
4024, 4215, 4218,
4219
Conrad Electronic 4217, 4219
Contec
4050
Coolsat
4096
Cosat
4048
Coship
4109
Crown
4011
Daeryung
4014
Daewoo
4057, 4217
DDC
4007
Delega
4007
Dew
4050
Diamond
4051
Digiality
4219
Digital Stream 4105
DIRECTV
4056, 4064, 4067,
4068, 4070, 4071,
4074, 4107, 4116,
4119, 4121, 4122,
4123, 4127, 4192,
4193, 4194, 4195,
4196, 4197, 4198,
4199, 4200, 4201,
4202, 4203, 4206,
4207, 4221
Discoverer
4212
Discovery
4216
Diseqc
4216
Dish Network 4018, 4065, 4089,
4092, 4094, 4095,
4117
Dishpro
4018, 4117
Distrisat
4053
Ditristrad
4048
DNT
4014, 4053, 4055
Drake
4072
DStv
4222
Dune
4024
Echostar
4014, 4018, 4065,
4089, 4117, 4217
Einhell
4001, 4005, 4011,
4217, 4218
Elap
4216, 4217
Elekta
4010
Elsat
4217
Elta
4001, 4008, 4024,
4048, 4053, 4055
Emanon
4001
Emme Esse
4008, 4024
Engel
4217
Ep Sat
4006
EURIEULT
4031
Eurodec
4052
Europa
4053, 4218, 4219
Europhon
4219
Eurosat
4011
Eurosky
4024, 4011, 4008,
4215, 4218, 4219
Eurostar
4011, 4215, 4219
Eutelsat
4217
Exator
4001, 4004
Expressvu
4117
Fenner
4024, 4212, 4217
Ferguson
4006, 4052, 4214
Fidelity
4218
Finlandia
4006
Finlux
4006
FinnSat
4050, 4052
Flair Mate
4217
Foxtel
4222
Freecom
4001, 4049, 4218
FTEmaximal
4024, 4217
Fuba
4024, 4001, 4008,
4014, 4015, 4055,
4215
Galaxis
4024, 4005, 4008,
4009, 4050, 4048,
4215, 4222
GE
4093, 4066, 4111,
4197
General Instrument
4073, 4019
GMI
4011
GOI
4117
Goldbox
GoldStar
Goodmans
Goodmind
Grandin
Grothusen
Grundig
4213
4049
4029, 4002, 4006
4111
4031
4001, 4049
4006, 4004, 4015,
4035, 4211, 4218,
4222
Hänsel & Gretel 4219
Hantor
4001, 4013
Hanuri
4010
Hauppauge
4044
Heliocom
4219
Helium
4219
Hinari
4007
Hirschmann
4024, 4015, 4210,
4218, 4219, 4216
Hisawa
4013
Hisense
4016
Hitachi
4114, 4006, 4199,
4203
Homecast
4087, 4084, 4085
Houston
4048
HTS
4117
Hughes
4064, 4068, 4194,
4192, 4196, 4202
Hughes Network Systems
4071
Humax
4097, 4025, 4030,
4060
Huth
4005, 4011, 4012,
4013, 4050, 4048,
4219, 4223
Hypson
4031
Ilo
4016
Imex
4031
Innovation
4008
Insignia
4107
Intertronic
4011
Intervision
4048, 4219
ITT Nokia
4006
Jerrold
4019
Johansson
4013
JOK
4216
JSR
4048
JVC
4089, 4065, 4117,
4029
Kamm
4217
Kathrein
4015, 4055, 4053,
4063, 4034, 4042,
4215, 4216, 4217
Kathrein Eurostar 4215
Klap
4216
Konig
4219
Kosmos
4049
KR
4004
Kreiselmeyer
4015
K-SAT
4217
Kyostar
4001
L&S Electronic 4024
Lasat
4024, 4010, 4008,
4054, 4215, 4212,
4219
Lasonic
4108
Lenco
4024, 4001, 4049,
4215, 4219, 4217
Leng
4013
Lennox
4048
Lenson
4218
Lexus
4053
LG
4103, 4107, 4049
Lifesat
4024, 4008, 4212,
4217
Lifetec
4008
Lorenzen
4219
Lorraine
4049
Lupus
4024, 4008
Luxor
4218
Lyonnaise
4052
Macab
4052
Magnavox
4127, 4101
Manata
4031, 4216, 4217
Manhattan
4006, 4010, 4048,
4216
Marantz
4055
Mascom
4010
Maspro
4006, 4217
Matsui
4216
-7-
Max
Mediabox
Mediamarkt
Mediasat
Medion
Medison
Mega
Memorex
Metronic
4219
4213
4011
4009, 4213, 4218
4024, 4008, 4217
4217
4055, 4053
4127
4031, 4028, 4001,
4004, 4005, 4010,
4217
Metz
4015
Micro electronic 4218, 4219, 4217
Micro Technology 4217
MicroGem
4106
Micromaxx
4024, 4008
Microstar
4008
Microtec
4217
Minerva
4015
Mitsubishi
4006, 4015, 4202
Mitsumi
4054
Morgan's
4011, 4054, 4055,
4053, 4217
Motorola
4090, 4091, 4088,
4019
Multichoice
4222
Multitec
4212
Muratto
4049
Mysat
4217
Navex
4013
Neuhaus
4009, 4048, 4218,
4219, 4217
Neusat
4217
Next Level
4019
NextWave
4223
Nikko
4011, 4217
Nokia
4006, 4040
Nordmende
4001, 4006, 4007,
4010, 4052
Nova
4222
Novis
4013
Oceanic
4051
Octagon
4001, 4004, 4050
Okano
4011
Optex
4048
Optus
4213, 4222, 4223
Orbitech
4001, 4212, 4213,
4218
OSat
4004
Otto Versand
4015
Pace
4006, 4015, 4035,
4043, 4047, 4216
Pacific
4051
Packsat
4216
Palcom
4007
Palladium
4011, 4218
Palsat
4212, 4218
Panasat
4222
Panasonic
4121, 4126, 4124,
4006, 4035, 4036,
4221, 4198
Panda
4006, 4219
Pansat
4125
Patriot
4216
Paysat
4127
PCT
4110
Philco
4101
Philips
4071, 4068, 4127,
4006, 4055, 4053,
4061, 4033, 4213,
4216, 4196, 4202,
4203, 4201, 4206
Phoenix
4050
Phonotrend
4006, 4005, 4048
Pioneer
4046, 4213
Polsat
4052
Predki
4013
Premiere
4048, 4213
Priesner
4011
Primestar
4076
Profile
4216
Promax
4006
Prosat
4007, 4005
Proscan
4093, 4066, 4122,
4197
Protek
4051
Proton
4016
Provision
4010
Quadral
Quelle
Quiero
RadioShack
Radiola
Radix
Rainbow
RCA
Realistic
Redpoint
Redstar
RFT
Roadstar
Roch
Rover
Saba
Sabre
Sagem
Sakura
Samsung
SAT
Sat Cruiser
Sat Partner
Sat Team
Satcom
Satec
Satelco
Satford
Satmaster
Satplus
Schneider
Schwaiger
SCS
Seemann
SEG
Seleco
Servi Sat
Siemens
Silva
Skantin
Skardin
4024, 4007, 4005,
4008, 4216
4015, 4215, 4219
4052
4019
4055, 4053
4014, 4037
4004
4093, 4066, 4112,
4113, 4118, 4119,
4116, 4122, 4197,
4207
4078
4009
4024, 4008
4005, 4055, 4053
4217
4031
4024, 4217
4010, 4215, 4219,
4216
4006
4023, 4052
4050
4064, 4071, 4069,
4123, 4120, 4003,
4000, 4001, 4032,
4196, 4200
4007, 4218
4223
4001, 4004, 4010,
4013, 4049, 4218
4217
4012, 4219
4217
4024
4012
4012
4212
4008, 4212, 4216
4051, 4212, 4219
4215
4011, 4009, 4014
4024, 4001, 4008,
4013
4048
4031, 4217
4015
4049
4217
4009
Skinsat
SKR
Skymaster
Skymax
SkySat
Skyvision
SM Electronic
Smart
Sony
SR
Star Choice
Starland
Starring
Start Trak
Strong
STS
STVI
Sumida
Sunny Sound
Sunsat
Sunstar
Supermax
Tandberg
Tandy
Tantec
TCM
Techniland
TechniSat
Technology
Technosat
Technowelt
Teco
Telanor
Telasat
Telecom
Telefunken
Teleka
Telemaster
Telesat
Telestar
Televes
Telewire
Tempo
Tevion
4218
4217
4017, 4022, 4005,
4212, 4217
4055, 4053
4212, 4218, 4219,
4217
4048
4212, 4217
4215, 4217
4067, 4070, 4213
4011, 4054
4019
4217
4013
4001
4024, 4001, 4004,
4008, 4049, 4222
4115
4031
4011
4024
4217
4024, 4011, 4054
4223
4052
4004
4006
4008
4012
4021, 4026, 4027,
4014, 4053, 4038,
4039, 4212, 4213,
4218
4222
4223
4219
4011, 4054
4007
4215, 4219
4217
4017, 4001, 4216
4004, 4011, 4014,
4218, 4219
4010
4219
4212, 4213, 4218
4006, 4218
4048
4223
4008, 4217
Thomson
Thorens
Thorn
Tivax
Tivo
Tokai
Tonna
Toshiba
Triad
Triasat
Triax
Turnsat
Tvonics
Twinner
UEC
Uher
UltimateTV
Uniden
Unisat
Unitor
Universum
US Digital
Variosat
Vega
Ventana
Viewsat
Visiosat
Voom
Vortec
Welltech
WeTeKom
Wevasat
Wewa
Winersat
Wisi
Woorisat
Worldsat
Xrypton
XSat
Zehnder
Zenith
Zodiac
© 2010 Yamaha Corporation
4020, 4006, 4052,
4058, 4208, 4215,
4213, 4219, 4216,
4217
4051
4006
4104
4196
4053
4006, 4012, 4048,
4218, 4217
4194, 4202, 4203
4049
4218
4015, 4215, 4218,
4217
4217
4214
4031, 4217
4222
4212
4070
4079, 4127
4011, 4050, 4053
4013
4015, 4215, 4219
4016
4015
4024
4055, 4053
4098
4013, 4048, 4216,
4217
4019
4001
4212
4212, 4218
4006
4006
4013
4006, 4014, 4015,
4218, 4219
4010
4216
4024
4217
4024, 4010, 4008,
4209, 4215
4102, 4107, 4195
4004
CD
Yamaha
5082, 5095
CD Recorder
Yamaha
5083
MD
Yamaha
5080, 5081, 5086
Tape
Yamaha
5084, 5087
Tuner
Yamaha
5066, 5071, 5085,
5088, 5090, 5092,
5094
XM
Yamaha
5091, 5093
SIRIUS
Yamaha
5064, 5067
DOCK
Yamaha
5068, 5089
NET
Yamaha
5076, 5079
LD
Yamaha
2080
Amplifier
Yamaha
5019, 5020
YC513F0/RC
-8-
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : Yes
Encryption : Standard V2.3 (128-bit)
User Access : Print, Extract, Print high-res
XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer : Acrobat Distiller 7.0.5 (Windows)
Creator Tool : FrameMaker 7.1
Modify Date : 2010:10:05 16:28:01+09:00
Create Date : 2010:06:22 16:13:26Z
Metadata Date : 2010:10:05 16:28:01+09:00
Format : application/pdf
Title :
Creator :
Document ID : uuid:61be1642-b9bd-4a17-9455-8aa9e3b7066f
Instance ID : uuid:a78bb696-0819-4f06-bdbe-95f0e30556a7
Page Layout : SinglePage
Page Mode : UseOutlines
Page Count : 148
EXIF Metadata provided by EXIF.tools
.