Yamaha RX A1020 Easy Setup Guide
User Manual: Yamaha RX-A1020 Easy Setup Guide
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
UAB 1 Preparation Accessories Check that the following accessories are supplied with the product. AV Receiver Remote control Batteries (AAA, R03, UM-4) (x2) Insert the batteries the right way round. Easy Setup Guide AM antenna FM antenna *One of the above is supplied depending on the region of purchase. *One of the above is supplied depending on the region of purchase. YPAO microphone English Power cable This document explains how to set up a 5.1- or 7.1-channel system and play back surround sound from a BD/DVD on the unit. To reduce the impact on natural resources, the Owner’s Manual for this product is supplied on CD-ROM. For more information about this product, refer to the Owner’s Manual on the supplied CD-ROM. PDF versions of this guide and “Owner’s Manual” can be downloaded from the following website. http://download.yamaha.com/ [For U.S. customers only] Visit the following website for additional information, FAQ’s, downloads such as “Owner’s Manual” and product updates. http://usa.yamaha.com/support/ CD-ROM Safety Brochure (Owner’s Manual) Easy Setup Guide *The supplied power cable varies depending on the region of purchase. • The illustrations of the main unit used in this guide are of the U.S.A. model, unless otherwise specified. Cables required for connections The following cables (not supplied) are required to build the system described in this document. • Speaker cables (depending on the number of speakers) • HDMI cable (x2) • Audio pin cable (x1) • Digital optical cable or stereo pin cable (x1*) * Not required if your TV supports ARC (Audio Return Channel) 2 Placing speakers Set up the speakers in the room using the following diagram as a reference. For information on other speaker systems, refer to “Owner’s Manual”. 5.1-channel system 7.1-channel system 1 9 1 2 2 3 4 5 10° to 30° 9 3 10° to 30° 6 7 30 cm (1 ft) or more 1 Front speaker (L) 4 5 10° to 30° 10° to 30° 2 Front speaker (R) 3 Center speaker 4 Surround speaker (L) 5 Surround speaker (R) 6 Surround back speaker (L) 7 Surround back speaker (R) 9 Subwoofer 2 En 3 Connecting speakers/subwoofer • Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For details, see “Setting the speaker impedance” in “Owner’s Manual”. 1 Connect the front speakers (1/2) to the FRONT (//\) terminals. 2 Connect the center speaker (3) to the CENTER terminal. • Use a subwoofer equipped with built-in amplifier. • Before connecting the speakers, remove the unit’s power cable from the AC wall outlet and turn off the subwoofer. • Ensure that the core wires of the speaker cable do not touch each other or come into contact with the unit’s metal areas. This may damage the unit or the speakers. If the speaker cables short circuit, “Check SP Wires” will appear on the front display when the unit is turned on. ZONE OUT CENTER PRE OUT (SINGLE) 2 The unit (rear) ROUND SUR. BACK SUBWOOFER ZONE 2 FRONT SURROUND SUR. BACK SUBWOOFER ZONE OUT CENTER 1 SURROUND L R ■ Connecting speaker cables SURROUND BACK (SINGLE) SURROUND SUR. BACK 1 2 The unit (rear) CENTER ROUND SUR. BACK SUBWOOFER ZONE 2 FRONT SPEAKERS R PRE OUT SUBWOOFER CENTER SPEAKERS L CENTER R FRONT L R ZONE 2/F.PRESENCE/ BI–AMP EXTRA SP L R SURROUND L R SINGLE SURROUND BACK L CENTER R FRONT L R ZONE 2/F.PRESENCE/ BI–AMP EXTRA SP L SINGLE Speaker cables have two wires. One is for connecting the negative (–) terminals of the unit and the speaker, and the other is for the positive (+) terminals. If the wires are colored to prevent confusion, connect the black wire to the negative and the other wire to the positive terminals. a Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable and twist the bare wires of the cable firmly together. + (red) + b 1 c 2 1 2 FR ON T - 9 a d 3 9 3 – (black) b Loosen the speaker terminal. 4 5 4 5 c Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the terminal. d Tighten the terminal. Using a banana plug (U.S.A., Canada, China, Australia and General models only) a Tighten the speaker terminal. Banana plug a + FR ON T b b Insert a banana plug into the end of the terminal. En 3 3 Connect the surround speakers (4/5) to the SURROUND (//\) terminals. ZONE OUT CENTER PRE OUT (SINGLE) SUR. BACK SUBWOOFER ZONE 2 FRONT SURROUND SUR. BACK SUBWOOFER ZONE OUT CENTER 2 SURROUND L R SURROUND BACK (SINGLE) ROUND SUR. BACK SUBWOOFER Connect the surround back speakers (6/7) to the SURROUND BACK (//\) terminals. ZONE 2 FRONT SURROUND SUR. BACK SUBWOOFER ZONE OUT CENTER 1 2 SPEAKERS R PRE OUT The unit (rear) CENTER For 7.1-channel system Connect the subwoofer (9) to the SUBWOOFER (1) jack. 1 The unit (rear) ROUND 4 CENTER R FRONT L R ZONE 2/F.PRESENCE/ BI–AMP EXTRA SP L R SURROUND L R SINGLE SURROUND BACK (SINGLE) SURROUND SUR. BACK 1 2 The unit (rear) CENTER ROUND SUR. BACK SUBWOOFER ZONE 2 FRONT SPEAKERS L PRE OUT SUBWOOFER CENTER SPEAKERS L CENTER R FRONT L R ZONE 2/F.PRESENCE/ BI–AMP EXTRA SP L R SURROUND L R SURROUND BACK SINGLE L CENTER R FRONT L R ZONE 2/F.PRESENCE/ BI–AMP EXTRA SP SINGLE Audio pin cable 1 9 4 2 1 3 9 5 4 2 1 3 9 5 En 3 4 5 6 4 2 7 L 4 Connecting external devices Audio out (digital optical or analog stereo) OPTICAL R TV Before connecting the power cable (General model only) HDMI in HDMI out HDMI HDMI BD/DVD player L HDMI O Make sure you set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110-120/220-240 V, 50/60 Hz. R L a HDMI OUT 1 jack HDMI DC OUT 5V 0.5A 2 AV 4 MONITOR OUT/ ZONE OUT AV OUT (1 BD/DVD) AV 1 AV 2 AV 3 Y PB COMPONENT VIDEO PR Y AV 3 AV 5 AV 6 AV 7 PB C PR A 1 REMOTE MONITOR OUT/ZONE OUT Y PB PR GND IN 2 B D AV 4 AUDIO 1 (2 TV) (2 TV) AUDIO 2 AUDIO 3 d Connect the supplied power cable to the unit and then to an AC wall outlet. 110V120V OUT AV 2 L 220V240V TRIGGER OUT AV 1 AUDIO 1 VOLTAGE SELECTOR RS-232C AV 4 (1 BD/DVD) ARC AV 3 VOLTAGE SELECTOR (General model only) HDMI HDMI OUT ( 3 NET ) 1 AV 2 HDMI (AV 1) jack (1 BD/DVD) NETWORK AV 1 c Connect a TV to the unit with a digital optical cable or a stereo pin cable. This connection is required to play back TV audio on the unit. This connection is not required if your TV supports ARC (Audio Return Channel). AV 1 2 ARC PHONO b Connect a TV to the unit with the other HDMI cable. HDMI HDMI OUT 1 AUDIO 4 Connect external devices to the unit. a Connect a BD/DVD player to the unit with an HDMI cable. If the BD/DVD player is currently connected to the TV directly with an HDMI cable, disconnect the cable from the TV and connect it to the unit. HDMI b c 1 MULTI CH INPUT 12V ZONE OUT CENTER PRE OUT (SINGLE) SURROUND SUR. BACK 0.1A 1 L R 2 1 COAXIAL 2 COAXIAL 3 OPTICAL 4 OPTICAL 5 OPTICAL 6 COAXIAL FRONT SURROUND SUR. BACK SUBWOOFER ZONE 2 FRONT SUBWOOFER CENTER SPEAKERS R SURROUND L R SURROUND BACK L CENTER R FRONT L R ZONE 2/F.PRESENCE/ BI–AMP EXTRA SP • For information on how to connect radio antennas or other external devices, see “PREPARATIONS” in “Owner’s Manual”. AC IN L R ANTENNA 75Ω FM HD Radio (4 RADIO) AM 5 OPTICAL SINGLE The unit (rear) O AUDIO 1 (OPTICAL or AUDIO) jack d To an AC wall outlet MAIN ZONE PURE DIRECT Turn on the unit 2 Turn on the unit, the TV and the BD/DVD player. 3 Use the TV remote control to change the TV input to video from the unit. The connections are complete. Proceed to the next page to optimize the speaker settings. VOLUME INPUT • By connecting a TV to the unit with an HDMI cable, you can configure the unit’s settings with the menu displayed on the TV. In addition, you can select the on-screen menu language from English (default), Japanese, French, German, Spanish, Russian and Chinese. For details, refer to “Owner’s Manual”. In this guide, illustrations of English menu screens are used as examples. Press the bottom of the front panel door gently to open the door The unit (front) En 5 5 Optimizing the speaker settings automatically (YPAO) 1 The following screen appears on the TV. The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. • During the measuring process, test tones are output at high volume. Ensure that the test tones do not frighten small children. Also, refrain from using this function at night when it may be a nuisance to others. Connect the YPAO microphone to the YPAO MIC jack on the front panel. RECEIVER SOURCE AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 PHONO MULTI USB NET PARTY HDMI OUT • During the measuring process, you cannot adjust the volume. • During the measuring process, keep the room as quiet as possible. • Do not connect headphones. • Do not stand between the speakers and the YPAO microphone during the measurement process (about 3 minutes). • Move to the corner of the room or leave the room. AUDIO TUNER MAIN ZONE 2 • To cancel the operation, disconnect the YPAO microphone before starting the measurement. SCENE Preparing for YPAO Turn on the subwoofer and set the volume to half. If the cross-over frequency is adjustable, set it to maximum. 1 2 3 4 BD/DVD TV NET RADIO YPAO MIC TOP MENU POP-UP/MENU ON SCREEN Cursor keys ENTER RETURN CROSSOVER/ HIGH CUT RETURN To start the measurement, use the cursor keys to select “Measure” and press ENTER. The measurement will start in 10 seconds. OPTION ENTER VOLUME 2 VOLUME MUTE PROGRAM The unit (front) The following screen appears on the TV when the measurement finishes. DISPLAY BAND MODE TUNING PRESET SUR. DECODE STRAIGHT MIN MAX MIN MAX MOVIE MUSIC INFO SLEEP ENHANCER PURE DIRECT YPAO microphone 1 2 3 5 6 7 9 0 4 8 MEMORY 10 ENT TV INPUT TV VOL Ear height Place the YPAO microphone at your listening position (same height as your ears). We recommend the use of a tripod as a microphone stand. You can use the tripod screws to fix the microphone in place. 6 En MUTE TV CH CODE SET • If any error message (such as E-1) or warning message (such as W-2) appears, see “Error messages” or “Warning messages” in “Owner’s Manual”. • If the warning message “W-1:Out of Phase” appears, see “If “W-1:Out of Phase” appears” (next page). 3 Use the cursor keys to select “Save/Cancel” and press ENTER. If “W-1:Out of Phase” appears Follow the procedure below to check the speaker connections. Depending on the type of speakers or room environment, this message may appear even if the speakers are connected correctly. 4 Use the cursor keys to select “SAVE” and press ENTER. a Use the cursor keys to select “Result” and press ENTER. b Use the cursor keys to select “Wiring”. c Check the cable connections (+/–) of the speaker that was identified as being “Reverse” in the warning message. If the speaker is connected correctly: You can save the current settings. 5 Disconnect the YPAO microphone from the unit. This completes optimization of the speaker settings. Press RETURN and proceed to step 3. If the speaker is connected incorrectly: Turn off the unit, reconnect the speaker cable, and then try YPAO measurement again. • The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be exposed to direct sunlight or high temperatures (such as on top of AV equipment). En 7 6 Playing back a BD/DVD Now let’s play back a BD/DVD. We recommend playing back multichannel audio (5.1-channel or more) to feel surround sound produced by the unit. Many more features! 1 SPIMP.- DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 ENHANCER SLEEP RECEIVER SOURCE Press AV 1 to select “AV 1” as the input source. HD 3 AV1 A.Sel:Auto MUTE VOLUME ADAPTIVE DRC PL L C R PR SL SW1 SW SW2 SR PL SBL SB SBR PR AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 PHONO MULTI USB NET PARTY HDMI OUT AV 1 AUDIO 2 3 TUNER MAIN ZONE 2 Start playback on the BD/DVD player. Press STRAIGHT repeatedly to select “STRAIGHT”. SPIMP.- DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 ENHANCER SLEEP SCENE 1 2 3 4 HD 3 BD/DVD TV NET VOLUME MUTE PROGRAM TOP MENU RADIO VOLUME SPIMP.- OPTION MUTE VOLUME ADAPTIVE DRC PL L C R PR SL SW1 SW SW2 SR PL SBL SB SBR PR Main:Volume HD 3 MUTE VOLUME ADAPTIVE DRC PL L C R PR SL SW1 SW SW2 SR PL SBL SB SBR PR This completes the basic setup procedure. DISPLAY BAND If surround sound is not working MODE TUNING PRESET SUR. DECODE STRAIGHT MOVIE MUSIC INFO SLEEP ENHANCER PURE DIRECT 1 2 3 4 5 6 7 8 9 0 STRAIGHT Sound is only being output from the front speakers during multichannel audio playback Check the digital audio output setting on the BD/DVD player. MEMORY 10 ENT TV It may be set to 2-channel output (such as PCM). INPUT TV VOL MUTE TV CH CODE SET Connecting other playback devices Connect audio devices (such as CD player), game consoles, camcorders, and many others. Selecting the sound mode Select the desired sound program (CINEMA DSP) or surround decoder suitable for movies, music, games, sports programs, and other uses. Playing back from iPod ENTER RETURN Please refer to “Owner’s Manual” on the supplied CD-ROM to help you get the most out of the unit. Press VOLUME to adjust the volume. DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 ENHANCER SLEEP POP-UP/MENU ON SCREEN 4 STRAIGHT A.Sel:Auto The unit has various other functions. No sound is coming from a specific speaker By using a USB cable supplied with iPod, you can enjoy iPod music on the unit. ■ Listening to FM/AM radio ■ Playing back music stored on a USB storage device ■ Playing back the network contents ■ Selecting the input source and favorite settings at once See “Troubleshooting” in “Owner’s Manual”. For more information, see “What you can do with the unit”. © 2012 Yamaha Corporation Printed in Malaysia ZC34720
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Page Mode : UseOutlines XMP Toolkit : 3.1-702 Modify Date : 2012:07:12 14:29:44-07:00 Create Date : 2012:06:25 17:15:57+09:00 Metadata Date : 2012:07:12 14:29:44-07:00 Format : application/pdf Document ID : uuid:d85ed719-6d22-4e0d-8796-f1824413674c Instance ID : uuid:f127fbda-7fb8-49ad-be6c-8c7c3bf0a8d7 Page Count : 8EXIF Metadata provided by EXIF.tools