Yamaha RX A720 Easy Setup Guide Esg UA 1
User Manual: Yamaha RX-A720 Easy Setup Guide
Open the PDF directly: View PDF .
Page Count: 8
Download | ![]() |
Open PDF In Browser | View PDF |
RX-A720_esg_UA.fm Page 1 Monday, March 5, 2012 4:59 PM UA 1 Preparation Accessories Check that the following accessories are supplied with the product. AV Receiver Easy Setup Guide Remote control Batteries (AAA, R03, UM-4) (x2) Insert the batteries the right way round. YPAO microphone Power cable *The supplied power cable varies depending on the region of purchase. English AM antenna FM antenna *The supplied FM antenna varies depending on the region of purchase. This document explains how to set up a 5.1- or 7.1-channel system and play back surround sound from a BD/DVD on the unit. CD-ROM (Owner’s Manual) Safety Brochure Easy Setup Guide To reduce the impact on natural resources, the Owner’s Manual for this product is supplied on CD-ROM. For more information about this product, refer to the Owner’s Manual on the supplied CD-ROM. PDF versions of this guide and “Owner’s Manual” can be downloaded from the following website. http://download.yamaha.com/ [For U.S. customers only] Visit the following website for additional information, FAQ’s, downloads such as “Owner’s Manual” and product updates. http://usa.yamaha.com/support/ Black process 45.0° 240.0 LPI Cables required for connections The following cables (not supplied) are required to build the system described in this document. • Speaker cables (depending on the number of speakers) • HDMI cable (x2) • Audio pin cable (x1) • Digital optical cable (x1) (not required if your TV supports ARC [Audio Return Channel]) RX-A720_esg_UA.fm Page 2 Monday, March 5, 2012 4:59 PM 2 Placing speakers Set up the speakers in the room using the following diagram as a reference. For information on other speaker systems, refer to “Owner’s Manual”. 5.1-channel system 7.1-channel system 1 9 1 2 2 3 4 5 10° to 30° 9 3 10° to 30° 6 7 30 cm (1 ft) or more 1 Front speaker (L) 4 5 10° to 30° 10° to 30° 2 Front speaker (R) 3 Center speaker 4 Surround speaker (L) 5 Surround speaker (R) 6 Surround back speaker (L) 7 Surround back speaker (R) 9 Subwoofer 2 En Black process 45.0° 240.0 LPI RX-A720_esg_UA.fm Page 3 Monday, March 5, 2012 4:59 PM 3 Connecting speakers/subwoofer • Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For details, see “Setting the speaker impedance” in “Owner’s Manual”. 1 Connect the front speakers (1/2) to the FRONT (//\) terminals. 2 Connect the center speaker (3) to the CENTER terminal. • Use a subwoofer equipped with built-in amplifier. • Before connecting the speakers, remove the unit’s power cable from the AC wall outlet and turn off the subwoofer. The unit (rear) The unit (rear) SPEAKERS FRONT CENTER SURROUND SPEAKERS SURROUND BACK/BI-AMP • Ensure that the core wires of the speaker cable do not touch each other or come into contact with the unit’s metal areas. This may damage the unit or the speakers. If the speaker cables short circuit, “Check SP Wires” will appear on the front display when the unit is turned on. ZONE 2/PRESENCE FRONT CENTER SURROUND SURROUND BACK/BI-AMP SINGLE SINGLE EXTRA SP EXTRA SP 1 1 AC IN AC IN 2 ■ Connecting speaker cables AUDIO OUT ZONE 2 OUT ZONE 2/PRESENCE 2 AUDIO OUT SUBWOOFER ZONE 2 OUT SUBWOOFER Speaker cables have two wires. One is for connecting the negative (–) terminals of the unit and the speaker, and the other is for the positive (+) terminals. If the wires are colored to prevent confusion, connect the black wire to the negative and the other wire to the positive terminals. a Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable and twist the bare wires of the cable firmly together. + (red) b 1 c FR ON 2 1 2 T d a 9 3 9 3 – (black) b Loosen the speaker terminal. 4 5 4 5 c Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the terminal. d Tighten the terminal. Using a banana plug a Tighten the speaker terminal. b Insert a banana plug into the end of the terminal. Banana plug a FR ON T b En Black process 45.0° 240.0 LPI 3 RX-A720_esg_UA.fm Page 4 Monday, March 5, 2012 3 4:59 PM Connect the surround speakers (4/5) to the SURROUND (//\) terminals. 4 Connect the subwoofer (9) to the SUBWOOFER (1) jack. The unit (rear) The unit (rear) CENTER SURROUND SPEAKERS SURROUND BACK/BI-AMP ZONE 2/PRESENCE FRONT CENTER SURROUND SPEAKERS SURROUND BACK/BI-AMP SINGLE EXTRA SP 9 4 CENTER En Black process 45.0° 240.0 LPI SURROUND BACK/BI-AMP EXTRA SP 1 AC IN AC IN 2 Audio pin cable AUDIO OUT SUBWOOFER ZONE 2 OUT 2 3 9 5 4 2 AUDIO OUT SUBWOOFER 1 ZONE 2/PRESENCE SINGLE ZONE 2 OUT 2 SUBWOOFER 1 3 9 5 2 3 4 5 6 4 SURROUND EXTRA SP 2 1 FRONT 1 AC IN ZONE 2 OUT ZONE 2/PRESENCE SINGLE 1 AUDIO OUT Connect the surround back speakers (6/7) to the SURROUND BACK (//\) terminals. The unit (rear) SPEAKERS FRONT For 7.1-channel system 7 RX-A720_esg_UA.fm Page 5 Monday, March 5, 2012 4:59 PM 1 4 Connecting external devices a Connect a BD/DVD player to the unit with an HDMI cable. If the BD/DVD player is currently connected to the TV directly with an HDMI cable, disconnect the cable from the TV and connect it to this unit. TV Audio out (optical) HDMI in HDMI out HDMI HDMI OPTICAL Connect external devices to the unit. BD/DVD player b Connect a TV to the unit with the other HDMI cable. HDMI O c Connect a TV to the unit with a digital optical cable. This connection is required to play back TV audio on the unit. This connection is not required if your TV supports ARC (Audio Return Channel). HDMI b c a HDMI OUT jack HDMI HDMI HDMI OUT (BD/DVD) d Connect the supplied power cable to the unit and then to an AC wall outlet. HDMI 1 HDMI 1 jack ARC • For information on how to connect radio antennas or other external devices, see “PREPARATIONS” in “Owner’s Manual”. DC OUT 5V 0.5A NETWORK HDMI 1 HDMI OUT (NET) HDMI 2 (BD/DVD) HDMI 3 HDMI 4 HDMI 5 ARC SPEAKERS ANTENNA (RADIO) COMPONENT VIDEO AM FRONT COMPONENT VIDEO CENTER SURROUND SURROUND BACK/BI-AMP 2 Turn on the unit, the TV and the BD/DVD player. 3 Use the TV remote control to change the TV input to video from the unit. ZONE 2/PRESENCE REMOTE FM PR IN PR SINGLE OUT PB PB VIDEO VIDEO Y Y MONITOR OUT 12V 0.1A TRIGGER OUT EXTRA SP 1 AC IN O AV 4 (OPTICAL) jack 2 OPTICAL OPTICAL AV 1 (TV) COAXIAL COAXIAL OPTICAL AV 2 AV 3 AV 4 (TV) AV 5 AV 6 AV OUT AUDIO 1 AUDIO OUT AUDIO 2 ZONE 2 OUT The connections are complete. Proceed to the next page to optimize the speaker settings. SUBWOOFER AV 4 The unit (rear) d To an AC wall outlet MAIN ZONE PURE DIRECT Turn on the unit ZONE 2 ZONE CONTROL INFO MEMORY PRESET INPUT FM AM TUNING VOLUME SCENE BD/DVD PHONES YPAO MIC TONE CONTROL TV NET PROGRAM • By connecting a TV to the unit with an HDMI cable, you can configure the unit’s settings with the menu displayed on the TV. In addition, you can select the on-screen menu language from English (default), Japanese, French, German, Spanish, Russian and Chinese. For details, refer to “Owner’s Manual”. In this guide, illustrations of English menu screens are used as examples. RADIO STRAIGHT VIDEO AUX USB SILENT CINEMA HDMI IN VIDEO iPod/iPhone/iPad 5V 2.1A The unit (front) En Black process 45.0° 240.0 LPI 5 RX-A720_esg_UA.fm Page 6 Monday, March 5, 2012 4:59 PM 5 Optimizing the speaker settings automatically (YPAO) 1 The following screen appears on the TV. The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. • During the measuring process, test tones are output at high volume. Ensure that the test tones do not frighten small children. Also, refrain from using this function at night when it may be a nuisance to others. • During the measuring process, you cannot adjust the volume. RECEIVER SOURCE HDMI 1 2 3 4 5 V-AUX • During the measuring process, keep the room as quiet as possible. AV 1 2 3 5 6 1 TUNER USB NET • Do not connect headphones. 4 AUDIO • Do not stand between the speakers and the YPAO microphone during the measurement process (about 3 minutes). MAIN • Move to the corner of the room or leave the room. 2 ZONE 2 • To cancel the operation, disconnect the YPAO microphone before starting the measurement. SCENE BD DVD Preparing for YPAO TV NET PROGRAM Turn on the subwoofer and set the volume to half. If the cross-over frequency is adjustable, set it to maximum. MUTE RADIO 2 VOLUME The unit (front) YPAO MIC TOP MENU POP-UP/MENU ON SCREEN CROSSOVER/ HIGH CUT Cursor keys ENTER RETURN RETURN To start the measurement, use the cursor keys to select “Measure” and press ENTER. The measurement will start in 10 seconds. OPTION ENTER VOLUME Connect the YPAO microphone to the YPAO MIC jack on the front panel. The following screen appears on the TV when the measurement finishes. DISPLAY BAND MODE TUNING PRESET SUR. DECODE STRAIGHT MIN MAX MIN MOVIE MUSIC INFO SLEEP 1 2 3 5 6 7 9 0 MAX ENHANCER PURE DIRECT YPAO microphone 4 8 MEMORY 10 ENT TV INPUT TV VO VOLL Ear height Place the YPAO microphone at your listening position (same height as your ears). We recommend the use of a tripod as a microphone stand. You can use the tripod screws to fix the microphone in place. 6 En Black process 45.0° 240.0 LPI MUTE TV TV CH CODE SET • If any error message (such as E-1) or warning message (such as W-2) appears, see “Error messages” or “Warning messages” in “Owner’s Manual”. • If the warning message “W-1:Out of Phase” appears, see “If “W-1:Out of Phase” appears” (next page). RX-A720_esg_UA.fm Page 7 Monday, March 5, 2012 3 4:59 PM Use the cursor keys to select “Save/Cancel” and press ENTER. If “W-1:Out of Phase” appears Follow the procedure below to check the speaker connections. Depending on the type of speakers or room environment, this message may appear even if the speakers are connected correctly. 4 Use the cursor keys to select “SAVE” and press ENTER. a Use the cursor keys to select “Result” and press ENTER. b Use the cursor keys to select “Wiring”. c Check the cable connections (+/–) of the speaker that was identified as being “Reverse” in the warning message. If the speaker is connected correctly: You can save the current settings. 5 Disconnect the YPAO microphone from the unit. This completes optimization of the speaker settings. Press RETURN and proceed to step 3. If the speaker is connected incorrectly: Turn off the unit, reconnect the speaker cable, and then try YPAO measurement again. • The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be exposed to direct sunlight or high temperatures (such as on top of AV equipment). En Black process 45.0° 240.0 LPI 7 RX-A720_esg_UA.fm Page 8 Monday, March 5, 2012 4:59 PM 6 Playing back a BD/DVD Now let’s play back a BD/DVD. We recommend playing back multichannel audio (5.1-channel or more) to feel surround sound produced by the unit. Many more features! 1 VOL. HDMI1 RECEIVER SOURCE Press HDMI 1 to select “HDMI 1” as the input source. L SL SW C R SR HDMI 1 2 3 4 5 HDMI 1 V-AUX AV 1 2 3 4 AUDIO 5 6 1 TUNER USB NET MAIN 2 3 2 Press STRAIGHT repeatedly to select “STRAIGHT”. NET STRAIGHT PROGRAM MUTE RADIO VOLUME VOLUME 4 L SL SW C R SR Press VOLUME to adjust the volume. VOL. TOP MENU Volume -30.0dB POP-UP/MENU ON SCREEN OPTION L SL SW C R SR This completes the basic setup procedure. ENTER RETURN If surround sound is not working DISPLAY BAND MODE TUNING PRESET SUR. DECODE STRAIGHT MOVIE MUSIC INFO SLEEP 1 2 5 6 9 0 STRAIGHT 3 7 Sound is only being output from the front speakers during multichannel audio playback 4 Check the digital audio output setting on the BD/DVD player. 8 It may be set to 2-channel output (such as PCM). ENHANCER PURE DIRECT MEMORY 10 ENT TV No sound is coming from a specific speaker INPUT TV VO VOLL MUTE TTVV CH CODE SET Connecting other playback devices Connect audio devices (such as CD player), game consoles, camcorders, and many others. Selecting the sound mode VOL. SCENE TV Please refer to “Owner’s Manual” on the supplied CD-ROM to help you get the most out of the unit. Start playback on the BD/DVD player. ZONE 2 BD DVD The unit has various other functions. See “Troubleshooting” in “Owner’s Manual”. Select the desired sound program (CINEMA DSP) or surround decoder suitable for movies, music, games, sports programs, and other uses. Playing back from iPod By using a USB cable supplied with iPod, you can enjoy iPod music on the unit. ■ Listening to FM/AM radio ■ Playing back music stored on a USB storage device ■ Playing back the network contents ■ Selecting the input source and favorite settings at once For more information, see “What you can do with the unit”. © 2012 Yamaha Corporation Printed in Malaysia ZA83140-1 Black process 45.0° 240.0 LPI
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2014:09:01 16:48:31+09:00 Modify Date : 2014:09:01 16:48:31+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2014:09:01 16:48:31+09:00 Format : application/pdf Document ID : uuid:f8d80c61-27b1-4a2a-bf66-279ec69a12a9 Instance ID : uuid:bbd289ea-deb4-4b39-ac02-5183ee80dce9 Page Layout : SinglePage Page Mode : UseOutlines Page Count : 8EXIF Metadata provided by EXIF.tools