Yamaha 01EN_RX V363_U RX V363 Owners Manual U

User Manual: Yamaha RX-V363 Owners Manual

Open the PDF directly: View PDF PDF.
Page Count: 77

DownloadYamaha 01EN_RX-V363_U RX-V363 Owners Manual U
Open PDF In BrowserView PDF
01EN_RX-V363_U_cv-1.fm Page 1 Sunday, December 2, 2007 8:31 PM

U

RX-V363
AV Receiver

OWNER’S MANUAL

Black process 45.0° 240.0 LPI

01EN_RX-V363_U.book Page i Thursday, January 31, 2008 3:52 PM

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS
10
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

•

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

1
2
3
4
5
6
7

8

9

Read Instructions – All the safety and operating instructions
should be read before the product is operated.
Retain Instructions – The safety and operating instructions
should be retained for future reference.
Heed Warnings – All warnings on the product and in the
operating instructions should be adhered to.
Follow Instructions – All operating and use instructions
should be followed.
Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Attachments – Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
Water and Moisture – Do not use this product near water –
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool;
and the like.
Accessories – Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
A product and cart combination should be moved
with care. Quick stops, excessive force, and
uneven surfaces may cause the product and
cart combination to overturn.

Caution-i En

11

12

13

14

15

16

17

18

19

Ventilation – Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
Power Sources – This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
products intended to operate from battery power, or other
sources, refer to the operating instructions.
Grounding or Polarization – This product may be equipped
with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be
fatal.
Overloading – Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
Object and Liquid Entry – Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on
the product.
Servicing – Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
Damage Requiring Service – Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,

01EN_RX-V363_U.book Page ii Thursday, January 31, 2008 3:52 PM

IMPORTANT SAFETY INSTRUCTIONS

d)

20

21

22

23

If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation,
e) If the product has been dropped or damaged in any
way, and
f)
When the product exhibits a distinct change in performance - this indicates a need for service.
Replacement Parts – When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
Safety Check – Upon completion of any service or repairs to
this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
Wall or Ceiling Mounting – The unit should be mounted
to a wall or ceiling only as recommended by the
manufacturer.
Heat – The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.

24

Outdoor Antenna Grounding – If an outside antenna or
cable system is connected to the product, be sure the antenna
or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING

MAST

ANTENNA
LEAD IN
WIRE

GROUND
CLAMP

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810–20)

ELECTRIC
SERVICE
EQUIPMENT

GROUNDING CONDUCTORS
(NEC SECTION 810–21)
GROUND CLAMPS

Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as
practical.

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)

NEC – NATIONAL ELECTRICAL CODE

FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2 IMPORTANT: When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product MUST
be used. Follow all installation instructions. Failure to
follow instructions could void your FCC authorization to
use this product in the USA.
3 NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15
for Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance that
your use of this product in a residential environment will
not result in harmful interference with other electronic
devices.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions found
in the users manual, may cause interference harmful to the
operation of other electronic devices.

Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this
product is found to be the source of interference, which
can be determined by turning the unit “OFF” and “ON”,
please try to eliminate the problem by using one of the
following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave., Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.

Caution-ii En

01EN_RX-V363_U.book Page iii Thursday, January 31, 2008 3:52 PM

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

Caution: Read this before operating your unit.
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this sound system in a well ventilated, cool, dry, clean
place – away from direct sunlight, heat sources, vibration,
dust, moisture, and/or cold. Allow ventilation space of at least
30 cm on the top, 20 cm on the left and right, and 20 cm on
the back of this unit.
3 Locate this unit away from other electrical appliances, motors,
or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in a environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign object may fall onto
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to
this unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
7 Do not plug in this unit to a wall outlet until all connections
are complete.
8 Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and may
cause fire, damage to this unit, and/or personal injury. Yamaha
will not be held responsible for any damage resulting from use
of this unit with a voltage other than specified.
13 To prevent damage by lightning, keep the power cord and
outdoor antennas disconnected from a wall outlet or the unit
during a lightning storm.
14 Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The
cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
16 Install this unit near the AC outlet and where the AC power
plug can be reached easily.
17 Be sure to read the “Troubleshooting” section on common
operating errors before concluding that this unit is faulty.

Caution-iii En

18 Before moving this unit, press ASTANDBY/ON to set this
unit in the standby mode, and disconnect the AC power plug
from the wall outlet.
19 VOLTAGE SELECTOR (Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE plugging
into the AC wall outlet.
Voltages are 110–120/220–240 V AC, 50/60 Hz.
20 The batteries shall not be exposed to excessive heat such as
sunshine, fire or like.
21 Excessive sound pressure from earphones and headphones can
cause hearing loss.

WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
This unit is not disconnected from the AC power
source as long as it is connected to the wall outlet, even
if this unit itself is turned off by ASTANDBY/ON.
This state is called the standby mode. In this state, this
unit is designed to consume a very small quantity of
power.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
POUR LES CONSOMMATEURS CANADIENS
Pour éviter les chocs électriques, introduire la lame la
plus large de la fiche dans la borne correspondante de
la prise et pousser jusqu’au fond.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.

01EN_RX-V363_U.book Page 1 Thursday, January 31, 2008 3:52 PM

Contents
Features ................................................................... 2
Getting started ........................................................ 3
Quick start guide .................................................... 4

Set menu.................................................................43
Using set menu ........................................................ 44
1 SOUND MENU.................................................... 45
2 INPUT MENU...................................................... 48
3 OPTION MENU................................................... 50

Remote control features........................................51
Controlling this unit, a TV, or other components.... 51
Setting remote control codes ................................... 53

Advanced setup......................................................54

ADDITIONAL INFORMATION
PREPARATION
Connections ............................................................. 9

APPENDIX
(at the end of this manual)

BASIC
OPERATION

Front panel................................................................i
Remote control ....................................................... ii
List of remote control codes ................................. iii

ADVANCED
OPERATION

Rear panel .................................................................. 9
Placing speakers....................................................... 10
Connecting speakers ................................................ 11
Setting the speaker impedance
(U.S.A. and Canada models only) ....................... 12
Information on jacks and cable plugs ...................... 13
Information on HDMI™.......................................... 14
Connecting video components................................. 15
Connecting audio components................................. 17
Connecting a Yamaha iPod™ universal dock and
Bluetooth™ adapter............................................. 18
Connecting to the VIDEO AUX jacks on the
front panel............................................................ 18
Connecting the FM and AM antennas ..................... 19
Connecting the power cable..................................... 19
Turning on and off the power .................................. 19
Front panel display .................................................. 20

Troubleshooting.....................................................55
Glossary..................................................................60
Specifications .........................................................62
Index .......................................................................63

PREPARATION

Preparation: Check the items ..................................... 4
Step 1: Set up your speakers...................................... 5
Step 2: Connect your DVD player and other
components............................................................ 6
Step 3: Turn on the power and
press SCENE 1 button ........................................... 7
What do you want to do with this unit?..................... 8

ADVANCED OPERATION

INTRODUCTION

INTRODUCTION

Basic setup ............................................................. 22

ADDITIONAL
INFORMATION

BASIC OPERATION
Selecting the SCENE templates........................... 24
Selecting the desired SCENE template.................... 24
Creating your original SCENE templates................ 27
Using remote control on the SCENE feature........... 28

Playback ................................................................ 29
Basic operations....................................................... 29
Additional operations............................................... 30

Sound field programs ........................................... 34
Sound field program descriptions............................ 34
Automatic tuning ..................................................... 37
Manual tuning.......................................................... 37
Automatic preset tuning........................................... 38
Manual preset tuning ............................................... 38
Selecting preset stations........................................... 39
Exchanging preset stations ...................................... 39

Using iPod™.......................................................... 40
Controls and functions for iPod™ ........................... 40

Using Bluetooth™ components ........................... 41

Recording .............................................................. 42

1 En

English

Pairing the Bluetooth™ adapter and
your Bluetooth™ component .............................. 41
Playback of the Bluetooth™ component ................. 41

• y indicates a tip for your operation.
• Some operations can be performed by using either the
buttons on the front panel or the ones on the remote
control. In case the button names differ between the front
panel and the remote control, the button name on the
remote control is given in parentheses.
• This manual is printed prior to production. Design and
specifications are subject to change in part as a result of
improvements, etc. In case of differences between the
manual and product, the product has priority.
• “A STANDBY/ON” or “3 DVD” (example) indicates
the name of the parts on the front panel or the remote
control. Refer to the attached sheet or the pages at the end
of this manual for the information about each position of
the parts.
• The symbol “☞ ” with page number(s) indicates the
corresponding reference page(s).

APPENDIX

FM/AM tuning ...................................................... 37

About this manual

01EN_RX-V363_U.book Page 2 Thursday, January 31, 2008 3:52 PM

Features

Features
Built-in 5-channel power amplifier

Sophisticated FM/AM tuner

◆ Minimum RMS output power

◆ 40-station random and direct preset tuning
◆ Automatic preset tuning

[U.S.A. and Canada models]
(1 kHz, 0.9% THD, 8 Ω)
Front: 100 W/ch
Center: 100 W
Surround: 100 W/ch
[Other models]
(1 kHz, 0.9% THD, 6 Ω)
Front: 100 W/ch
Center: 100 W
Surround: 100 W/ch

SCENE select function
◆ Preset SCENE templates for various situations
◆ SCENE template customizing capability

Decoders and DSP circuits
◆ Proprietary Yamaha technology for the creation of
multi-channel surround sound
◆ Compressed Music Enhancer mode
◆ Dolby Digital decoder
◆ Dolby Pro Logic/Dolby Pro Logic II decoder
◆ DTS decoder
◆ Virtual CINEMA DSP
◆ SILENT CINEMA™

HDMI (High-Definition Multimedia Interface)
◆ HDMI interface for standard, enhanced or high-definition
video (includes 1080p video signal transmission)

DOCK terminal
◆ DOCK terminal to connect a Yamaha iPod universal dock
(such as YDS-10, sold separately) or Bluetooth adapter (such
as YBA-10, sold separately).

Other features
◆ 192-kHz/24-bit D/A converter
◆ 6 additional input jacks for discrete multi-channel input
◆ Component video input/output capability
(3 COMPONENT VIDEO INs and 1 MONITOR OUT)
◆ iPod controlling capability
◆ Sleep timer
◆ Cinema and music night listening modes
◆ Remote control with preset remote control codes

iPod™
“iPod” is a trademark of Apple Inc., registered in the U.S. and
other countries.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks
of Dolby Laboratories.

Bluetooth™
Bluetooth is a registered trademark of the Bluetooth SIG and is
used by Yamaha in accordance with a license agreement.

“SILENT CINEMA” is a trademark of Yamaha Corporation.
“DTS” and “DTS Digital Surround” are registered trademarks of
DTS, Inc.

“HDMI”, the “HDMI” logo and “High-Definition Multimedia
Interface” are trademarks or registered trademarks of HDMI
Licensing LLC.

We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your
sensitive hearing.

2 En

Since hearing damage from loud sounds is often
undetectable until it is too late, Yamaha and the
Electronic Industries Association’s Consumer
Electronics Group recommend you to avoid
prolonged exposure from excessive volume levels.

01EN_RX-V363_U.book Page 3 Thursday, January 31, 2008 3:52 PM

Getting started

Getting started
■ Installing batteries in the remote control

Check that you received all of the following parts.
❏ Remote control

1

❏ Batteries (2) (AAA, R03, UM-4)

3

❏ AM loop antenna
❏ Indoor FM antenna

■ VOLTAGE SELECTOR
(Asia and General models only)

INTRODUCTION

■ Checking the supplied accessories

2

Caution
The VOLTAGE SELECTOR on the rear panel of this
unit must be set for your local voltage BEFORE
plugging the power cable into the AC wall outlet.
Improper setting of the VOLTAGE SELECTOR may
cause damage to this unit and create a potential fire
hazard.
Select the switch position (upper or lower)
according to your local voltage using a straight
slot screwdriver.
Voltages are 110-120/220-240 V AC, 50/60 Hz.
VOLTAGE
SELECTOR

1

Take off the battery compartment cover.

2

Insert the two supplied batteries
(AAA, R03, UM-4) according to the polarity
markings (+ and –) on the inside of the
battery compartment.

3

Snap the battery compartment cover back
into place.

Notes
110V120V
220V240V

• Change all of the batteries if you notice the following condition:
– the operation range of the remote control decreases.
• Do not use an old battery and a new one together.
• Do not use different types of batteries (such as alkaline and
manganese batteries) together. Read the packaging carefully as
these different types of batteries may have the same shape and
color.
• If the batteries have leaked, dispose of them immediately. Avoid
touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before
installing new batteries.
• Do not throw away batteries with general house waste; dispose
of them correctly in accordance with your local regulations.
• If the remote control is without batteries for more than 2
minutes, or if exhausted batteries remain in the remote control,
the contents of the memory may be cleared. When the memory
is cleared, insert new batteries and set up the remote control
code.

English

3 En

01EN_RX-V363_U.book Page 4 Thursday, January 31, 2008 3:52 PM

Quick start guide

Quick start guide
The following steps describe the easiest way to enjoy
DVD movie playback in your home theater.
Video monitor

Front right
speaker

Prepare the following items.
Subwoofer

Front left
speaker

Preparation: Check the items

Surround right
speaker

❏ Speakers
❏ Front speaker ..................................... x 2
❏ Center speaker ................................... x 1
❏ Surround speaker .............................. x 2

Select magnetically shielded speakers. The
minimum required speakers are two front speakers.
Center speaker

❏ Active subwoofer ................................... x 1

Select an active subwoofer equipped with an RCA
input jack.

DVD player
Surround left
speaker

❏ Speaker cable ......................................... x 5
❏ Subwoofer cable ..................................... x 1

Select a monaural RCA cable.
❏ DVD player .............................................. x 1

Step 1: Set up your speakers

☞ P. 5

Select DVD player equipped with coaxial digital
audio output jack and composite video output
jack.
❏ Video monitor ......................................... x 1

Select a TV monitor, video monitor or projector
equipped with a composite video input jack.
❏ Video cable ............................................. x 2

Select an RCA composite video cable.

Step 2: Connect your DVD player
and other components

☞ P. 6

Step 3: Turn on the power and
press SCENE 1 button

☞ P. 7
Enjoy DVD playback!

4 En

❏ Digital coaxial audio cable .................... x 1

01EN_RX-V363_U.book Page 5 Thursday, January 31, 2008 3:52 PM

Quick start guide

Be sure to connect the left channel (L), right channel
(R), “+” (red) and “–” (black) properly.

Step 1: Set up your speakers

Front speakers
Loosen

DVD

SURROUND
R
L

DTV/CBL
HDMI

DVD

Insert

Tighten

SPEAKERS

ANTENNA
OUT
DOCK

INTRODUCTION

Place your speakers in the room and connect them to this
unit.
CENTER

FRONT B
L

R

COMPONENT VIDEO
DTV/CBL
DVR
MONITOR
OUT
AM

PR

GND

VIDEO

DIGITAL INPUT

PB

DVD

DVR

DTV/CBL

MONITOR
OUT

OUT

IN

FM
75
UNBAL.

OPTICAL

Y
CD 3
MULTI CH INPUT
FRONT

DTV/
CBL 2

SURROUND

DVD

CENTER

DTV/CBL

DVR
IN

L

L

R

R

AUDIO
OUT

CD

IN
MD/ OUT
(PLAY) CD-R (REC)

OUTPUT

SUB
WOOFER

DVD 1
COAXIAL
R FRONT A

SUBWOOFER

L

1

Place your speakers and subwoofer in the
room.

2

Connect speaker cables to each speaker.
To the front right
speaker

To the front left
speaker

Center and surround speakers
Press
down

Insert

Release

Cables are colored or shaped differently, perhaps with
a stripe, groove or ridge. Connect the striped
(grooved, etc.) cable to the “+” (red) terminals of
your speaker. Connect the plain cable to the “–”
(black) terminals.
To the center speaker

3

Connect each speaker cable to the
corresponding speaker terminal on this unit.
1

2

3

4

To the surround
right speaker

4

To the surround
left speaker

Connect the subwoofer cable to the input
jack on the subwoofer and the SUBWOOFER
OUTPUT jack on this unit.
Subwoofer
AV receiver

1 Make sure that this unit and the subwoofer are
unplugged from the AC wall outlets.
2 Twist the exposed wires of the speaker cables
together to prevent short circuits.
3 Do not let the bare speaker wires touch each other.
4 Do not let the bare speaker wires touch any metal
part of this unit.

SUBWOOFER
OUTPUT jack

Input jack
Subwoofer cable

English

5 En

01EN_RX-V363_U.book Page 6 Thursday, January 31, 2008 3:52 PM

Quick start guide

Step 2: Connect your DVD player
and other components
DVD

SURROUND
R
L

DTV/CBL
HDMI

DVD

CENTER

Connect the video cable to the video input
jack on your video monitor and the VIDEO
MONITOR OUT jack on this unit.
Video monitor

SPEAKERS

ANTENNA
OUT
DOCK

3

FRONT B
L

AV receiver

R

COMPONENT VIDEO
DTV/CBL
DVR
MONITOR
OUT
AM

PR

GND

VIDEO

DIGITAL INPUT

PB

DVD

DTV/CBL

DVD

DTV/CBL

DVR

MONITOR
OUT

OUT

IN

FM
75
UNBAL.

OPTICAL

Y
CD 3
MULTI CH INPUT
FRONT

DTV/
CBL 2

SURROUND

CENTER

DVR
IN

L

L

R

R

AUDIO
OUT

CD

IN
MD/ OUT
(PLAY) CD-R (REC)

OUTPUT

SUB
WOOFER

DVD 1
COAXIAL
R FRONT A

SUBWOOFER

L

Make sure that this unit and the DVD
player are unplugged from the AC wall
outlets.

Video input jack
Video cable

4
1

Connect the digital coaxial audio cable to the
digital coaxial audio output jack on your DVD
player and the DVD DIGITAL INPUT COAXIAL
jack on this unit.
DVD player
AV receiver

VIDEO MONITOR
OUT jack

Connect the power plug of this unit and other
components into the AC wall outlet.

■ For further connections
• Using the other kind of speaker
combinations

☞ P. 10

• Connecting a video monitor and
DVD player

☞ P. 15

• Connecting a cable TV/satellite tuner and
☞ P. 15
DVD recorder
Digital coaxial
audio output
jack

• Connecting to the HDMI jacks
Digital coaxial audio
cable

2

DVD DIGITAL INPUT
COAXIAL jack

Connect the video cable to the composite
video output jack on your DVD player and the
DVD VIDEO jack on this unit.
DVD player

AV receiver

☞ P. 16

• Connecting to the COMPONENT VIDEO
☞ P. 16
jacks
• Using the VIDEO AUX jacks on the front
☞ P. 18
panel
• Connecting a CD player and an MD
☞ P. 17
recorder
• Connecting a DVD player via analog
☞ P. 17
multi-channel audio connection
• Connecting an outdoor FM/AM antenna
☞ P. 19

Composite video
output jack

6 En

Video cable

DVD VIDEO jack

• Connecting an iPod/Bluetooth dock

☞ P. 18

01EN_RX-V363_U.book Page 7 Thursday, January 31, 2008 3:52 PM

Quick start guide

Step 3: Turn on the power and
press SCENE 1 button

5

Rotate HVOLUME to adjust the volume.
INTRODUCTION

Check the type of the connected speakers.
If the speakers are 6 ohm speakers, set “SP IMP.” to
“6ΩMIN” before using this unit (see page 12).

1

Turn on the video monitor and then set the
input source selector of the video monitor to
this unit.
Note

2

Press ASTANDBY/ON on the front panel.

When you change the input source or sound field program, the
SCENE mode is deactivated and the indicator on the SCENE
button turns off.

■ About SCENE function
Just by pressing one SCENE button, you can turn on this
unit and recall your favorite input source and sound field
program according to the SCENE template that has been
assigned to the SCENE button. The SCENE templates are
built combinations of input sources and sound field
programs.
y

3

Press PSCENE 1.
“DVD Viewing” appears in the front panel display,
and this unit automatically optimize own status for
the DVD playback.

y
The indicator on the selected SCENE button lights up while
this unit is in the SCENE mode.

4

■ Using the other SCENE buttons
Default
SCENE
button

The name of the SCENE template
and its description

SCENE
1

DVD Viewing
– input source: DVD
– sound field program: STRAIGHT
For when you want to listen to a music disc from
the connected DVD player as the background
music for this room.

SCENE
2

Disc Listening
– input source: DVD
– sound field program: 5ch Stereo
For when you want to listen to a music disc from
the connected DVD player as the background
music for this room.

SCENE
3

TV Viewing *1
– input source: DTV/CBL
– sound field program: STRAIGHT
For when you want to watch a TV program.

SCENE
4

Radio Listening *2, *3, *4
– input source: TUNER
– sound field program: Music Enh. 5ch
For when you want to listen to a music program
from the FM radio station

7 En

English

Start playback of the desired DVD on your
player.

If you connect a Yamaha product that has capability of the
SCENE control signals, this unit can automatically activate the
component and start playback. Refer to the instruction manual of
the DVD player for further information.

01EN_RX-V363_U.book Page 8 Thursday, January 31, 2008 3:52 PM

Quick start guide

Notes
*1

You must connect a cable TV or a satellite tuner to this unit in
advance. See page 16 for details.
*2 You need to connect the supplied FM and AM antennas to this
unit in advance. See page 19 for details.
*3 You have to tune into the desired radio station. See pages 37 to
39 for the tuning information.
*4 To achieve the best possible reception, orient the connected
AM loop antenna, or adjust the position of the end of the
indoor FM antenna.

What do you want to do with this
unit?
■ Customizing the SCENE templates
• Using various SCENE templates

☞ P. 24

■ Using various input sources
• Basic controls of this unit

☞ P. 29

• Enjoying FM/AM radio programs

☞ P. 37

■ After using this unit...

• Using your iPod with this unit

☞ P. 40

Press ASTANDBY/ON on the front panel to set
this unit to the standby mode.

• Using the Bluetooth component

☞ P. 41

y
If you cannot find the desired situation, you can select and change
the assigned SCENE template for the SCENE buttons. See
page 24 for details.

■ Using various sound features
• Using various sound field programs

☞ P. 34

■ Adjusting the parameters of this unit
• Optimizing the speaker parameters for your
listening room (BASIC SETUP)
☞ P. 22
• Manually adjusting various parameters of
☞ P. 43
this unit
This unit is set to the standby mode. To turn on this unit
from the standby mode, press ASTANDBY/ON (or
DPOWER) on the front panel. See page 19 for details.

• Setting the remote control
• Adjusting the advanced parameters

☞ P. 54

Note
In the standby mode, this unit consumes a small amount of power
in order to receive infrared signals from the remote control.

☞ P. 51

■ Additional features
• Automatically turning off this unit

☞ P. 33

8 En

01EN_RX-V363_U.book Page 9 Thursday, January 31, 2008 3:52 PM

Connections

Connections
Rear panel
1

2

3

4 5

6

ANTENNA
DVD

SPEAKERS
SURROUND
R
L

DTV/CBL
HDMI

DOCK
DVD

CENTER

FRONT B
L

PREPARATION

OUT

R

COMPONENT VIDEO
DTV/CBL
DVR
MONITOR
OUT
AM

PR

GND

VIDEO

DIGITAL INPUT

PB

DVD

DTV/CBL

DVR
IN

MONITOR
OUT

OUT

FM
75
UNBAL.

OPTICAL

Y
CD 3
MULTI CH INPUT
FRONT

DTV/
CBL 2

SURROUND

DVD

CENTER

L

DTV/CBL

DVR
IN

AUDIO

CD

OUT

IN
MD/ OUT
(PLAY) CD-R (REC)

OUTPUT

SUB
WOOFER

L

DVD 1
R

R

COAXIAL
R FRONT A

SUBWOOFER

7

8

9

L

0
Name

See page

1

DOCK terminal

18

2

COMPONENT VIDEO jacks

16

3

HDMI jacks

16

4

VIDEO jacks

15

5

ANTENNA terminals

19

6

SPEAKERS terminals

11

7

DIGITAL INPUT jacks

15, 17

8

MULTI CH INPUT jacks

9

AUDIO jacks

0

SUBWOOFER OUTPUT jack

17
15, 17
11

English

9 En

01EN_RX-V363_U.book Page 10 Thursday, January 31, 2008 3:52 PM

Connections

Placing speakers
The speaker layout below shows the speaker setting we recommend. You can use it to enjoy CINEMA DSP and
multi-channel audio sources.

FL

C

FR

FR
SW
FL

30˚

C
SL

SR

SR
60˚

SL

80˚

SR

SL

Front left and right speakers (FL and FR)
The front speakers are used for the main source sound plus effect sounds. Place these speakers at an equal distance from the
ideal listening position. The distance of each speaker from each side of the video monitor should be the same.
Center speaker (C)
The center speaker is for the center channel sounds (dialog, vocals, etc.). If for some reason it is not practical to use a
center speaker, you can do without it. Best results, however, are obtained with the full system.
Surround left and right speakers (SL and SR)
The surround speakers are used for effect and surround sounds.
Subwoofer (SW)
The use of a subwoofer with a built-in amplifier, such as the Yamaha Active Servo Processing Subwoofer System, is
effective not only for reinforcing bass frequencies from any or all channels, but also for high fidelity sound reproduction
of the LFE (low-frequency effect) channel included in Dolby Digital and DTS sources. The position of the subwoofer is
not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front
speakers. Turn it slightly toward the center of the room to reduce wall reflections.

10 En

01EN_RX-V363_U.book Page 11 Thursday, January 31, 2008 3:52 PM

Connections

Connecting speakers
Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty,
this unit cannot reproduce the input sources accurately.
Caution
•
•
•
•

Surround speakers
Right
Left

Front speakers (B)
Right
Left

PREPARATION

Use speakers with the specified impedance shown on the rear panel of this unit.
If you are to use 6 ohm speakers, be sure to set “SP IMP.” to “6ΩMIN” before using this unit (see page 12).
Before connecting the speakers, make sure that this the AC power plug is disconnected from the AC wall outlet.
Do not let the bare speaker wires touch each other or let them touch any metal part of this unit. This could damage
this unit and/or speakers.
• Use magnetically shielded speakers. If this type of speakers still creates the interference with the monitor, place the
speakers away from the monitor.

Center
speaker

SPEAKERS

ANTENNA
OUT

DVD

SURROUND
R
L

DTV/CBL
HDMI

DOCK
DVD

CENTER

FRONT B
L

R

COMPONENT VIDEO
DTV/CBL
DVR
MONITOR
OUT
AM

PR

GND

VIDEO

DIGITAL INPUT

PB

DVD

DTV/CBL

DVR
IN

MONITOR
OUT

OUT

FM
75
UNBAL.

OPTICAL

Y
CD 3
MULTI CH INPUT
FRONT

DTV/
CBL 2

SURROUND

DVD

CENTER

L

DTV/CBL

DVR
IN

AUDIO

CD

OUT

L

IN
MD/ OUT
(PLAY) CD-R (REC)

OUTPUT

SUB
WOOFER

DVD 1
R

R

COAXIAL
R FRONT A

SUBWOOFER

Subwoofer

■ Before connecting to the SPEAKERS
terminal
A speaker cord is actually a pair of insulated cables
running side by side. Cables are colored or shaped
differently, perhaps with a stripe, groove or ridges.
Connect the striped (grooved, etc.) cable to the “+” (red)
terminals of this unit and your speaker. Connect the plain
cable to the “–” (black) terminals.

L

Right
Left
Front speakers (A)

Remove approximately 10 mm (3/8”) of insulation
from the end of each speaker cable and then
twist the bare wires of the cable together to
prevent short circuits.
10 mm (3/8”)

English

11 En

01EN_RX-V363_U.book Page 12 Thursday, January 31, 2008 3:52 PM

Connections

■ Connecting to the FRONT A terminals

2
1

Red: positive (+)
Black: negative (–)

Caution
If you are to use 6 ohm speakers, set “SP IMP.” to
“6ΩMIN” as follows BEFORE using this unit.

3
1

Loosen the knob.

2

Insert the bare end of the speaker wire into
the slit on the terminal.

3

Setting the speaker impedance
(U.S.A. and Canada models only)

1

Make sure this unit is turned off.
See page 19 for details about turning on or off this
unit.

2

Press and hold JTONE CONTROL and
then press ASTANDBY/ON to turn on this
unit.
This unit turns on, an the advanced setup menu
appears in the front panel display.

3

Press KPROGRAM l / h repeatedly to
select “SP IMP.”.
The following display appears in the front panel
display.

Tighten the knob to secure the wire.

Connecting the banana plug
(except Europe, Russia, Korea, and Asia models)
The banana plug is a single-pole electrical connector
widely used to terminate speaker cables. First, tighten the
knob and then insert the banana plug connector into the
end of the corresponding terminal.
Banana plug

SP IMP.- 8 MIN

4
■ Connecting to the FRONT B, CENTER,
and SURROUND terminals

Press LSTRAIGHT repeatedly to select
“6ΩMIN”.
The following display appears in the front panel
display.

SP IMP.- 6 MIN
Red: positive (+)
Black: negative (–)

5

1

Press down the tab.

Press ASTANDBY/ON to confirm your
selection and set this unit to the standby
mode.

Note
The setting you made is reflected next time you turn on this unit.

2

Insert the bare end of the speaker wire into
the hole on the terminal.

3

Release the tab to secure the wire.

12 En

01EN_RX-V363_U.book Page 13 Thursday, January 31, 2008 3:52 PM

Connections

Information on jacks and cable plugs
Audio jacks and cable plugs
DIGITAL AUDIO

DIGITAL AUDIO

L

R

COAXIAL

OPTICAL

(White)

(Red)

(Orange)

L

R

C

AUDIO

Coaxial
digital audio
cable plug

COMPONENT VIDEO
Y
PB
PR

VIDEO

(Yellow)

(Green)

(Blue)

(Red)

O

V

Y

PB

PR

Optical
digital
audio cable
plug

Composite
video cable
plug

PREPARATION

Left and right
analog audio
cable plugs

Video jacks and cable plugs

Component
video cable
plugs

■ Audio jacks

■ Video jacks

This unit has three types of audio jacks. Connection
depends on the availability of audio jacks on your other
components.

This unit has two types of video jacks. Connection
depends on the availability of input jacks on your video
monitor.

AUDIO jacks
For conventional analog audio signals transmitted via left
and right analog audio cables. Connect red plugs to the
right jacks and white plugs to the left jacks.

VIDEO jacks
For conventional composite video signals transmitted via
composite video cables.

DIGITAL AUDIO COAXIAL jacks
For digital audio signals transmitted via coaxial digital
audio cables.

COMPONENT VIDEO jacks
For component signals, separated into the luminance (Y)
and chrominance (PB, PR) video signals transmitted on
separate wires of component video cables.

DIGITAL AUDIO OPTICAL jacks
For digital audio signals transmitted via optical digital
audio cables.

Video signal flow for MONITOR OUT

Notes

COMPONENT
VIDEO

• You can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. All digital input jacks are compatible with
digital signals with up to 96 kHz of sampling frequency.
• This unit handles digital and analog signals independently. Thus
audio signals input at the digital jacks are not output at the
analog AUDIO OUT (REC) jacks.

Input

Output
(MONITOR OUT)

PR

PR

PB

PB

Y

Y

VIDEO

English

13 En

01EN_RX-V363_U.book Page 14 Thursday, January 31, 2008 3:52 PM

Connections

Information on HDMI™
Audio signals input at the HDMI jack are not output from any speaker terminals but output from the connected video
monitor.
To enjoy the sound from speakers connected to this unit,
– make an analog or digital connection besides the HDMI connection (see page 16).
– mute the volume of the connected video monitor.
You can play back pictures by connecting your video monitor and video source component to this unit using HDMI
connections.
At that time, audio/video signals output from the connected component (such as DVD player etc.) are output to the
connected video monitor only when this unit is turned on and set to the input source (DVD or DTV/CBL).
Furthermore, available audio/video signals depend on the specification of the connected video monitor. Refer to the
instruction manual of each connected component.

■ HDMI jack and cable plug
HDMI

HDMI cable
plug

y
• We recommend using an HDMI cable shorter than 5 meters
(16 feet) with the HDMI logo printed on it.
• Use a conversion cable (HDMI jack ↔ DVI-D jack) to connect
this unit to other DVI components.

14 En

01EN_RX-V363_U.book Page 15 Thursday, January 31, 2008 3:52 PM

Connections

Connecting video components
y
You can also connect a video monitor, DVD player, digital TV,
and cable TV to this unit using the HDMI or COMPONENT
VIDEO connection (see page 16).

OUT

DVD

■ Connecting a cable TV/satellite tuner
and a DVD recorder

DTV/CBL

OUT

HDMI
DOCK
DVD

DVD

PREPARATION

■ Connecting a video monitor and a DVD
player

Make sure that this unit and other
components are unplugged from the
AC wall outlets.

DTV/CBL
HDMI

COMPONENT VIDEO
DTV/CBL
DVR
MONITOR
OUT

DOCK
DVD

PR

COMPONENT VIDEO
DTV/CBL
DVR
MONITOR
OUT

PR
VIDEO

DIGITAL INPUT

PB

DVD

DVR

DTV/CBL

PB

MONITOR
OUT

OUT

IN

VIDEO

DIGITAL INPUT

OPTICAL

DVD

DVR

DTV/CBL

MONITOR
OUT

OUT

IN
OPTICAL

Y

Y

CD 3

CD 3
MULTI CH INPUT
FRONT

DTV/
CBL 2

SURROUND

DVD

CENTER

DTV/CBL

DVR
IN

L

L

R

R

AUDIO

MULTI CH INPUT

CD

OUT

FRONT

DTV/
CBL 2

SURROUND

DVD 1

DVD

CENTER

L

DTV/CBL

AUDIO

DVR
IN

CD

OUT

L

DVD 1
R

COAXIAL

R

COAXIAL
SUBWOOFER

SUBWOOFER

L

V

R

V

O

L

V

R

L

V

R

L

R

V

Video in

Audio in

Audio out

Video out

Audio out

Video out

Audio out

Video in

Audio out

Video out

C

Audio out
DVD player

*

Video monitor*

Cable TV or
Satellite tuner

DVD recorder

indicates recommended connections

indicates recommended connections

indicates alternative connections

indicates alternative connections

When you use the internal tuner of the TV as the input source,
connect the digital or analog audio output jacks of the TV and
digital or analog audio input jacks of this unit.

English

15 En

01EN_RX-V363_U.book Page 16 Thursday, January 31, 2008 3:52 PM

Connections

■ Connecting to the HDMI or COMPONENT VIDEO jacks
You can enjoy high-quality pictures by connecting your video monitor and video source components to this unit using
HDMI or COMPONENT VIDEO connections.
Note
Be sure to connect your video components in the same way you connect your video monitor to this unit. For example, if you connect
your video monitor to this unit using an HDMI or COMPONENT VIDEO connection, connect your video components to this unit using
the HDMI or COMPONENT VIDEO connection.

HDMI connection

Connecting to the COMPONENT VIDEO jacks

Audio signals input at the HDMI jack are not output
from any speaker terminals but output from the
connected video monitor.
To enjoy the sound from speakers connected to this unit,
– make an analog or digital connection besides the
HDMI connection (see page 15).
– mute the volume of the connected video monitor.

Video monitor
DVD player

PR

Video in

PB

Video out

Y

Video monitor

Y

PB

PR

Cable TV or
satellite tuner

OUT

DVD

DTV/CBL
HD

DOCK

COMPONENT VIDEO
DTV/CBL
DVR
MONITOR
OUT

DVD

PR
VIDEO

DIGITAL INPUT

PB

DVD

DTV/CBL

DVR
IN

MON
O

OUT

OPTICAL

Y
CD 3
ANTENNA
OUT

DVD

MULTI CH INPUT
FRONT

DTV/
CBL 2

DTV/CBL

SURROUND

DVD

CENTER

L

HDMI

OMPONENT VIDEO
DTV/CBL
DVR
MONITOR
OUT

DTV/CBL

DVR
IN

AUDIO
OUT

L

DVD 1
AM

R

R

COAXIAL
GND

SUBWOOFER

VIDEO
DVD

DVR

DTV/CBL
IN

OUT

MONITOR
OUT

FM
75
UNBAL.

MULTI CH INPUT

AUDIO

Y

PB

PR

Y

PB

PR

Video out

Video out

Cable TV or
satellite tuner

DVD recorder

DVD player

Notes
• Connect the input source components to the HDMI DVD or
HDMI DTV/CBL jack to display the video images on the video
monitor connected to the HDMI OUT jack.
• Audio/video signals output from the connected component
(such as DVD player etc.) are output to the connected video
monitor only when this unit is turned on and set to the input
source (DVD or DTV/CBL).
• Available audio/video signals depend on the specification of the
connected video monitor. Refer to the instruction manual of
each connected component.

16 En

C

01EN_RX-V363_U.book Page 17 Thursday, January 31, 2008 3:52 PM

Connections

Connecting audio components
■ Connecting a CD player and a CD
recorder/MD recorder

Make sure that this unit and other
components are unplugged from the
AC wall outlets.

Note
When you connect your CD player via analog and digital
connection, priority is given to the signal input at the DIGITAL
INPUT jack.

GND

VIDEO

DIGITAL INPUT

PB

DVD

DVR

DTV/CBL

MONITOR
OUT

OUT

IN

FM

PREPARATION

75
UNBAL.

OPTICAL

Y
CD 3
MULTI CH INPUT
FRONT

DTV/
CBL 2

SURROUND

DVD

CENTER

L

DTV/CBL

DVR
IN

AUDIO

CD

IN
MD/ OUT
(PLAY) CD-R (REC)

OUT

OUTPUT

SUB
WOOFER

L

DVD 1
R

R

COAXIAL
SUBWOOFER

O

L

R

Audio out

L

Audio out

Audio out

CD player

R

L

R

Audio in

CD recorder or MD
recorder

indicates recommended connections
indicates alternative connections

■ Connecting to the MULTI CH INPUT jacks
This unit is equipped with 6 additional input jacks (FRONT L/R, SURROUND L/R, CENTER and SUBWOOFER) for
discrete multi-channel input from a multi-format player, external decoder or sound processor. Connect the output jacks
on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to match the left and right
output jacks to the left and right input jacks for the front and surround channels.
CD 3
MULTI CH INPUT
FRONT

DTV/
CBL 2

SURROUND

DVD

CENTER

L

DTV/CBL

DVR
IN

L

DVD 1
R

R

COAXIAL
SUBWOOFER

R

English

Center out

Subwoofer out

L

Surround out

R

Front out

L

Notes
• When you select the component connected to the MULTI CH
INPUT jacks as the input source (see page 30), this unit
automatically turns off the digital sound field processor, and
you cannot select sound field programs.
• This unit does not redirect signals input at the MULTI CH
INPUT jacks to accommodate for missing speakers. We
recommend that you connect a 5.1-channel speaker system
before using this feature.

Multi-format player or
external decoder

17 En

01EN_RX-V363_U.book Page 18 Thursday, January 31, 2008 3:52 PM

Connections

Connecting a Yamaha iPod™
universal dock and Bluetooth™
adapter

Connecting to the VIDEO AUX jacks
on the front panel
Use the VIDEO AUX jacks on the front panel to connect a
game console or a video camera to this unit.
Caution

Make sure that this unit and other
components are unplugged from the
AC wall outlets.

Be sure to turn down the volume of this unit and other
components before making connections.
Notes

This unit is equipped with the DOCK terminal on the rear
panel that allows you to connect a Yamaha iPod universal
dock (such as YDS-10, sold separately) or Bluetooth
adapter (such as YBA-10, sold separately). Connect a
Yamaha iPod universal dock or Bluetooth adapter to the
DOCK terminal on the rear panel of this unit using its
dedicated cable.

• The audio signals input at the DOCK terminal on the rear panel
take priority over the ones input at the VIDEO AUX jacks.
• To reproduce the source signals input at these jacks, select
“V-AUX” as the input source.
• The audio signals input at the PORTABLE mini jack take
priority over the ones input at the AUDIO L/R jacks.

y

VOLUME

Refer to “Using iPod™” on page 40 for playback of your iPod
and “Using Bluetooth™ components” on page 41 for playback of
your Bluetooth components.

STANDBY
/ON
EDIT
PRESET/TUNING

BAND

PRESET/TUNING

A/B/C/D/E

2

3

STRAIGHT

NIGHT

PROGRAM
PHONES

DTV/CBL

DVR

VIDEO AUX

AUDIO SELECT

VIDEO

L

AUDIO

R

EFFECT

VIDEO AUX

COMPONENT VID
DVD

TUNING AUTO/MAN'L

4

INPUT

TONE CONTROL

SPEAKERS
A/B/OFF

SILENT CINEMA

DOCK

MEMORY

SCENE

1

VIDEO

L

V

L

AUDIO

R

PORTABLE

PR

DIGITAL INPUT
PB

OPTICAL
CD

3

DTV/
CBL

2

DVD

1

3.5 mm
stereo mini
plug

Y

MULTI CH INPU
FRONT

R

SURROU

L

18 En

Audio out

Yamaha iPod universal dock or
Bluetooth adapter

R

Video out

COAXIAL

Game console or
video camera

PORTABLE

01EN_RX-V363_U.book Page 19 Thursday, January 31, 2008 3:52 PM

Connections

Assembling the supplied AM loop antenna

Connecting the FM and AM
antennas
Both FM and AM indoor antennas are supplied with this
unit. In general, these antennas should provide sufficient
signal strength. Connect each antenna correctly to the
designated terminals.
Notes

Outdoor AM antenna

AM loop
antenna
(supplied)

Use a 5 to 10 m (16 to 32
ft) of vinyl-covered wire
extended outdoors from a
window.

Note
The types of the supplied AM loop antenna is different
depending on the models.

Connecting the power cable
Once all connections are complete, plug the power cable
into the AC wall outlet.

Power cable

ANTENNA

Indoor FM
antenna
(supplied)

DEO
N

DVR OUT

PREPARATION

• The AM loop antenna should be placed away from this unit.
• A properly installed outdoor antenna provides clearer reception
than an indoor one. If you experience poor reception quality,
install an outdoor antenna. Consult the nearest authorized
Yamaha dealer or service center about outdoor antennas.
• The AM loop antenna should always be connected, even if an
outdoor AM antenna is connected to this unit.

MONITOR
OUT
AM
GND

(U.S.A. model)
FM

R SURRO

75
UNBAL.

AUDIO
N

DVR OUT

OUTP
CD

IN
MD/ OUT
(PLAY) CD-R (REC)

To the AC wall outlet

S

Ground
For maximum safety and minimum
interference, connect the antenna GND
terminal to a good earth ground. A good earth
ground is a metal stake driven into moist earth.

Turning on and off the power
■ Turning on this unit

Connecting the wire of the AM loop antenna
Open the
lever

Insert

Close the
lever

Press ASTANDBY/ON (or D POWER) to turn
on this unit.
y
When you turn on this unit, there will be a 4 to 5-second delay
before this unit can reproduce sound.

■ Set this unit to the standby mode

y
The wire of the AM loop antenna does not have any polarity
and you can connect either end of the wire to AM or GND
terminal.

Press ASTANDBY/ON (or E STANDBY) to set
this unit to the standby mode.
Note

19 En

English

In the standby mode, this unit consumes a small amount of power
in order to receive infrared signals from the remote control.

01EN_RX-V363_U.book Page 20 Thursday, January 31, 2008 3:52 PM

Connections

Front panel display
1

2

3

4
DVR

t

6

5
V-AUX

DTV/CBL

7
MD/CD-R

DVD

DOCK

VIRTUAL
ENHANCER

TUNER

8
CD

AUTO TUNED STEREO MEMORY
PRESET
SLEEP MUTE

SP SILENT CINEMA
NIGHT
AB

q DIGITAL
q PL

ft

q PL

mS
dB

PCM

0

A

B

C

1 Decoder indicator
Lights up when any of the decoders of this unit functions.
2 ENHANCER indicator
Lights up when the Compressed Music Enhancer mode is
selected (see page 34).

D

E

9
VOLUME
dB

LFE
L C R
SL
SR

F

G

0 PCM indicator
Lights up when this unit is reproducing PCM (Pulse Code
Modulation) digital audio signals.
A Headphones indicator
Lights up when headphones are connected (see page 30).

3 VIRTUAL indicator
Lights up when Virtual CINEMA DSP is active
(see page 36).

B SP A B indicators
Light up according to the set of front speakers selected
(see page 29).

4 SILENT CINEMA indicator
Lights up when headphones are connected and a sound
field program is selected (see page 36).

C NIGHT indicator
Lights up when you select a night listening mode
(see page 31).

5 DOCK indicator
• Lights up when you station your iPod in a Yamaha
iPod universal dock (such as YDS-10, sold separately)
connected to the DOCK terminal of this unit
(see page 18) when V-AUX is selected as the input
source.
• Flashes while the connected Yamaha Bluetooth adaptor
(such as YBA-10, sold separately) and the Bluetooth
component is in the paring (see page 18) or the
Bluetooth adaptor is searching the Bluetooth
component (see page 41).
• Light up while the connected Yamaha Bluetooth
adaptor is connected to the Bluetooth component
(see page 18).

D CINEMA DSP indicator
Lights up when you select a sound field program
(see page 34).

6 Input source indicators
The corresponding cursor lights up to show the currently
selected input source.
7 Tuner indicators
Lights up when this unit is in the FM or AM tuning mode
(see page 37).
8 MUTE indicator
Flashes while the MUTE function is on (see page 30).
9 VOLUME level indicator
Indicates the current volume level.

20 En

E Multi-information display
Shows the name of the current sound field program and
other information when adjusting or changing settings.
F SLEEP indicator
Lights up while the sleep timer is on (see page 33).
G Input channel and speaker indicators

LFE
L C R
SL
SR

LFE indicator
Input channel indicators

LFE indicator
Lights up when the input signal contains the LFE
signal.
Input channel indicators
Indicate the channel components of the current digital
input signal.

01EN_RX-V363_U.book Page 21 Thursday, January 31, 2008 3:52 PM

Connections

■ Using the remote control
The remote control transmits a directional infrared ray.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.

30º

30º

PREPARATION

Approximately 6 m (20 ft)

1 Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
y
To set the remote control codes for other components,
see page 53.

Notes
• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following types
of conditions:
– places of high humidity, such as near a bath
– places of high temperature, such as near a heater or stove
– places of extremely low temperatures
– dusty places
• To set the remote control codes for other components,
see page 53.

English

21 En

01EN_RX-V363_U.book Page 22 Thursday, January 31, 2008 3:52 PM

Basic setup

Basic setup
The “BASIC SETUP” feature is a useful way to set up your system quickly and with minimal effort.
Notes
• Make sure you disconnect your headphones from this unit.
• If you wish to configure this unit manually using more precise adjustments, use the detailed parameters in “SOUND MENU”
(see page 45).
• Altering any parameters in “BASIC SETUP” resets all parameters manually adjusted in “SOUND MENU” (see page 45).
• Initial settings are indicated in bold under each parameter.
• Press 8RETURN on the remote control to return to the previous menu level.

1

Press 4AMP on the remote control.

2

Press HMENU.
“BASIC SETUP” appears in the front panel display.

5

SUBWOOFER .. YES

. BASIC SETUP
3

Choices: YES, NONE
• Select “YES” if you have a subwoofer in your
system.
• Select “NONE” if you do not have a subwoofer in
your system.

Press 7ENTER to enter “BASIC SETUP”.
“ROOM” appears in the front panel display.

6

ROOM:
4

S >M

L

Press 7l / h to select the desired setting.
Select the size of the room where you have installed
your speakers. In general, the room sizes are defined
as follows:

Press 7n to select “SUBWOOFER” and then
7l / h to select the desired setting.

Press 7n to select “SPEAKERS” and then
7l / h to select the number of speakers
connected to this unit.

SPEAKERS..5spk
Choice

Display

Speakers

Choices: S, M, L
[U.S.A. and Canada models]
S (small)
16 x 13 ft, 200 ft2 (4.8 x 4.0 m, 20 m2)
M (medium) 20 x 16 ft, 300 ft2 (6.3 x 5.0 m, 30 m2)
L (large)
26 x 19 ft, 450 ft2 (7.9 x 5.8 m, 45 m2)
[Other models]
S (small)
3.6 x 2.8 m, 10 m2
M (medium) 4.8 x 4.0 m, 20 m2
L (large)
6.3 x 5.0 m, 30 m2

2spk

L

R

3spk

L

C R

4spk

L
SL

R
SR

5spk

22 En

L C R
SL
SR

Front L/R

Front L/R, Center

Front L/R, Surround L/R

Front L/R, Center, Surround L/R

01EN_RX-V363_U.book Page 23 Thursday, January 31, 2008 3:52 PM

Basic setup

7

Press 7n to select “SET” and then 7l / h
to select the desired setting.

SET

Press 7ENTER to confirm your selection.
• If you selected “YES” in step 9, the setup
procedure is completed and the display returns to
the top set menu display. Press HMENU to exit
from “BASIC SETUP”.
• If you selected “NO” in step 9, the front speaker
level adjustment display appears in the front panel
display.

11

Press 7k / n to select a speaker and then
7l / h to adjust the balance.
The selected speaker and the front left speaker (or the
surround left speaker) output a test tone in turn.
• Press 7h to increase the value.
• Press 7l to decrease the value.

>CANCEL

Choices: SET, CANCEL
• Select “SET” to apply the settings you made.
• Select “CANCEL” to cancel the setup procedure
without making any changes.
y
You can also press HMENU to cancel the setup procedure.

8

Press 7ENTER to confirm your selection.
If you selected “SET” in step 7, each speaker outputs
a test tone twice in turn. “CHECK:TestTone” appears
in the front panel display for a few seconds and then
“CHECK OK?” appears in the front panel display.

FR ----||----

CHECK:TestTone

• Select “FR” to adjust the balance between the front
left and right speakers.
• Select “C” to adjust the balance between the front
left and center speakers.
• Select “SL” to adjust the balance between the front
left and surround left speakers.
• Select “SR” to adjust the balance between the
surround left and surround right speakers.
• Select “SWFR” to adjust the balance between the
front left speaker and the subwoofer.

y
• Check the speaker connections (see page 5) and adjust the
“SPEAKERS” settings back in step 6, if necessary.
• The indicator of the speaker currently outputting the test
tone flashes in the front panel display.

9

Press 7l / h to select the desired setting.

CHECK OK? .. YES
Choices: YES, NO
• Select “YES” to complete the setup procedure if
the test tone levels from each speaker were
satisfactory.
• Select “NO” to proceed to the speaker level
adjustment menu to balance the output level of
each speaker.

PREPARATION

10

Note
The available speaker channels differ depending on the
setting of the speakers.

12

Press HMENU to exit from “BASIC SETUP”.

English

23 En

01EN_RX-V363_U.book Page 24 Thursday, January 31, 2008 3:52 PM

SELECTING THE SCENE TEMPLATES

Selecting the SCENE templates
This unit is equipped with 13 preset SCENE templates for
various situations of using this unit. As the initial factory
setting, the following SCENE templates are assigned to
each SCENE button:

2

Press NINPUT l / h (or press 4AMP and
then 7l / h) to select the desired template.
l

SCENE 1: DVD Viewing
SCENE 2: Disc Listening
SCENE 3: TV Viewing
SCENE 4: Radio Listening

INPUT

h

Front panel

or

If you want to use other SCENE templates, you can select
the desired SCENE templates from the SCENE template
library and assign the templates to the selected SCENE
buttons on the front panel and the remote control.

AMP

ENTER

Select the desired SCENE template
Remote control

1

Assign the
SCENE template
to the SCENE
button

SCENE template library
(Image)

DVD Movie View
3

Selecting the desired SCENE
template
1

Press and hold the desired PSCENE (or
5SCENE) button for 3 seconds.
The indicator on the selected SCENE button on the
front panel starts to flash, and the name of currently
assigned SCENE template appears in the front panel
display.
3 seconds

3 seconds

1

or

1

Front panel

Remote control

1

Flashes

DVD Viewing
24 En

Press the PSCENE (or 5SCENE) button
again to confirm the selection.
The selected SCENE template is assigned to the
button.

1

Front panel

or

1

Remote control

y
To cancel the procedure, press 4AMP and then 8RETURN.

Note
Once the desired SCENE templates are assigned to the
corresponding SCENE buttons, you may need to set the input
source of the SCENE template on the remote control. See page 28
for details.

01EN_RX-V363_U.book Page 25 Thursday, January 31, 2008 3:52 PM

Selecting the SCENE templates

■ Which SCENE template would you like to select?
Which source do you like to
play back?
Video sources
(DVD video,
Recorded video)

Which component do you
like for playback?

DVD

SCENE templates

DVD Viewing

Default SCENE
buttons

1

DVD Movie Viewing

DVD Live Viewing

Music discs (CD,
SA-CD or DVD-Audio)

DVR

DVR Viewing

DVD

Music Disc Listening

Disc Listening

BASIC
OPERATION

CD

2

CD Listening

CD Music Listening

Radio programs

TUNER (FM/AM)

Radio Listening

iPod or Bluetooth
component

DOCK

Dock Listening

TV programs

DTV/CBL

TV Viewing

4

3

TV Sports Viewing

Video games

V-AUX

Game Playing

Note
When iPod is connected to the Yamaha iPod universal dock or a Bluetooth component is connected to the Bluetooth adapter, this unit
plays back the audio sources input at the DOCK terminal.

y
You can create your original SCENE templates by editing the preset SCENE templates. See page 27 for details.

English

25 En

01EN_RX-V363_U.book Page 26 Thursday, January 31, 2008 3:52 PM

Selecting the SCENE templates

■ Preset SCENE template descriptions
SCENE template
Features

Input source

Playback mode

CD Music Listening
Select this SCENE template when you play back music discs on
your CD player.

CD

2ch Stereo

DVD Viewing (SCENE 1 as the default setting)
Select this SCENE template when you play back general contents
on your DVD player.

DVD

STRAIGHT

DVD Movie Viewing

Radio Listening
(SCENE 4 as the default setting)
Select this SCENE template when you enjoy FM or AM radio
programs.

TUNER

Select this SCENE template when you play back movies on your
DVD player.

DVD

Movie Dramatic

DVD Live Viewing
Select this SCENE template when you enjoy music live video on
your DVD player.

DVD

Pop/Rock

Dock Listening
Select this SCENE template when you play back music on your
iPod stationed in a Yamaha iPod universal dock or Bluetooth
component that is connected to the Bluetooth adapter.

DOCK

TV Viewing (SCENE 3 as the default setting)
Select this SCENE template when you enjoy TV programs.

Select this SCENE template when you play back movies on your
digital video recorder.

Movie Dramatic

Music Disc Listening

2ch Stereo

Select this SCENE template when you enjoy sports programs on
TV.

DTV/CBL

Select this SCENE template when you play back music sources as
the back ground music on your DVD player.

DVD

5ch Stereo

CD Listening
Select this SCENE template when you play back music source as
the back ground music on your CD player.

CD

26 En

5ch Stereo

TV Sports

Game Playing
Select this SCENE template when you play video games.

V-AUX

Disc Listening
(SCENE 2 as the default setting)

STRAIGHT

TV Sports Viewing

Select this SCENE template when you play back music discs on
your DVD player.

DVD

Music Enh. 5ch

DTV/CBL

DVR Viewing

DVR

Music Enh. 5ch

Game

01EN_RX-V363_U.book Page 27 Thursday, January 31, 2008 3:52 PM

Selecting the SCENE templates

Creating your original SCENE
templates

2

You can create your original SCENE templates for each
SCENE button. You can refer to the preset 13 SCENE
templates to create the original SCENE templates.

■ Customizing the preset SCENE
templates

• The input source component
• The active sound field programs or STRAIGHT
mode
• The night listening mode setting (see page 31)
− SYSTEM: Keeps the current night listening
mode.
− CINEMA: Sets the night listening mode to the
CINEMA mode.
− MUSIC: Sets the night listening mode to the
MUSIC mode.

Use this feature to customize the preset SCENE templates.
Select the desired SCENE
template

Create an original SCENE
template

SCENE : DVD Viewing
SCENE : DVD Viewing
INPUT : DVD

3

Press the 5SCENE button again to confirm
the edit.
1

1

Assign the SCENE
template to the SCENE
button

1

Press and hold the desired 5SCENE button
for 3 seconds and then press 4AMP.
The SCENE template customizing display appears on
the front panel display.
1

AMP

3 seconds

Note
When the SCENE template you want to customize is not
assigned to any of the 5SCENE button, press 7l / h
repeatedly to recall the desired SCENE template (see
page 24).

BASIC
OPERATION

SCENE template library
(Image)

Press 7k / n to select the desired parameter
of the SCENE template and then 7l / h to
select the desired value of the selected
parameter.
You can adjust the following parameters for a SCENE
template:

y
• An asterisk mark (*) appears by the name of the original
SCENE template.
• To cancel the procedure, press 4AMP and then 8RETURN.

Notes
• After changing the assignment of the SCENE template to the
5SCENE buttons, you may need to set the input source of the
SCENE template on the remote control. See page 28 for details.
• You can create a customized SCENE template for each
5SCENE button, and if you create another customized
SCENE template, this unit overwrites the old customized
SCENE template with the new one.
• The customized SCENE template is only available for the
assigned 5SCENE button.

■ Renaming the SCENE templates
Select SCENE in step 2 of “Customizing the
preset SCENE templates” and then press
7 ENTER.
• Press 7 k / n to select the desired character.
• Press 7 l / h to place “_” (underscore) under the
space or the desired character.
• Press 8 RETURN to cancel the new name.
• Press 7 ENTER to confirm the new name.
English

27 En

01EN_RX-V363_U.book Page 28 Thursday, January 31, 2008 3:52 PM

Selecting the SCENE templates

Using remote control on the SCENE feature
■ Controlling the input source
components in the SCENE mode

■ Setting input source of the customized
SCENE template on the remote control

You can operate both this unit and the input source
component by using the remote control. You must set the
appropriate remote control code for each input source in
advance (see page 53).

If you customize the input source of the selected SCENE
template, you must set the input source of the SCENE
template on the remote control to operate the input source
component correctly.

1

Press the desired 5SCENE button on the
remote control.

Press and hold the 5SCENE button and the
desired input selector button (3) for 3 seconds.

2

Press the desired buttons in the * area below
to control the input source component of the
selected SCENE template.

y

*

POWER

POWER

STANDBY

POWER

TV

AV

A

B

C

MUTE

CD

MD/CD-R

TUNER

DVD

DTV/CBL

DVR

V-AUX/DOCK

D

E

AMP

TV INPUT

TV MUTE

1

2

TV CH

TV VOL

SCENE

BAND LEVEL
TITLE

3

MENU

4

SCENE buttons

VOLUME

ENTER

RETURN

DISPLAY

REC

l

PROG h

1

2

STRAIGHT

5

ENHANCER SUR. DECODE

3
7

MULTI CH IN AUDIO SEL

9

4

NIGHT

6
0

10

8
SLEEP
ENT

Note
*

These buttons control the input source component. See
page 51 for details of the function of each button.

28 En

Press the 5SCENE button again to operate the input source
component.

01EN_RX-V363_U.book Page 29 Thursday, January 31, 2008 3:52 PM

PLAYBACK

Playback
Caution
Extreme caution should be exercised when you play
back CDs encoded in DTS. If you play back a CD
encoded in DTS on a DTS-incompatible CD player,
you will only hear some unwanted noise that may
damage your speakers. Check whether your CD player
supports CDs encoded in DTS. Also, check the sound
output level of your CD player before you play back a
CD encoded in DTS.

Basic operations
1

5

Rotate HVOLUME (or press IVOLUME
+/–) to adjust the volume to the desired
output level.

6

Press KPROGRAM l / h (or press 4AMP
and then press 0PROG l / h) repeatedly to
select the desired sound field program.
The name of the selected sound field program appears
in the front panel display.
See page 34 for details about sound field programs.

Movie Dramatic
Currently selected surround field program

2

3

Press ISPEAKERS repeatedly to select the
front speakers you want to use.
The respective speaker indicators lights up in the
front panel display.
Press NINPUT l / h repeatedly (or press
one of the input selector buttons (3)) to
select the desired input source.
The name of the currently selected input source
appears in the front panel display for a few seconds.
Available input source
DVR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

CD

INPUT:DVD

Notes
• Choose a sound field program based on your listening
preference, not merely on the name of the program.
• When you select an input source, this unit automatically selects
the last sound field program used with the corresponding input
source.
• Sound field programs cannot be selected when the component
connected to the MULTI CH INPUT jacks is selected as the
input source (see page 30).
• When PCM signals with a sampling frequency higher than 48
kHz are input, this unit is automatically set to the “STRAIGHT”
mode (see page 36).
• To display information about the currently selected input source
in the front panel display, see page 32 for details.

■ Guide to contents

Currently selected input source

When you want to...

4

Start playback on the selected component or
select a broadcast station.
• Refer to the operating instructions for the source
component.
• See page 37 for details about FM or AM tuning
instructions.

BASIC
OPERATION

Turn on the video monitor connected to this
unit.

See
page

Adjust the tonal quality of the front speakers

31

Edit parameters of sound field programs

35

Enjoy the sources which have wide dynamic range at
night

31

Use headphones

30

Select a decoder to play back sources with

35

Set this unit to the standby mode automatically

33

English

29 En

01EN_RX-V363_U.book Page 30 Thursday, January 31, 2008 3:52 PM

Playback

■ Selecting the front speaker set

Additional operations
■ Using your headphones
Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.

Press ISPEAKERS repeatedly to turn on or off
the set of front speakers connected to the FRONT
A or FRONT B speaker terminals.
The active front speaker set changes as follows:
FRONT A

FRONT B

OFF

VOLUME

STANDBY
/ON
EDIT
PRESET/TUNING

l

A/B/C/D/E

BAND

PRESET/TUNING

h

MEMORY

TUNING AUTO/MAN'L

SCENE

1

l
PHONES

SILENT CINEMA

SPEAKERS
A/B/OFF

TONE CONTROL

PROGRAM

2

3

STRAIGHT

NIGHT

h

Note

4

l

INPUT

VIDEO AUX

h
AUDIO SELECT

VIDEO

L

AUDIO

R

PORTABLE

EFFECT

Turn off the volume level of this unit when you switch the front
speaker setting.

■ Using the Zone B feature
When you set “FRONT B” to “ZONE B” (see page 45),
you can use the speakers connected to the FRONT B
speaker terminals in another room (Zone B).
y
When you select a sound field program, SILENT CINEMA mode
is automatically activated (see page 36).

Press ISPEAKERS on the front panel
repeatedly to turn on or off the Zone B speakers.
When you activate the Zone B speakers, all the speakers in
the main room are muted.

Notes
• When you connect headphones, no signals are output at the
speaker terminals.
• All Dolby Digital and DTS audio signals are mixed down to the
left and right headphone channels.

■ Muting the audio output
Press FMUTE to mute the audio output.
Press FMUTE again to resume the audio output.
y
• You can also rotate HVOLUME (or press IVOLUME +/–) to
resume the audio output.
• You can adjust the muting level by using “MUTE TYP.” in
“SOUND MENU” (see page 48).
• The MUTE indicator flashes in the front panel display when the
audio output is muted and disappears from the front panel
display when the audio output is resumed.

Notes
• You cannot activate both the main room and Zone B speakers
simultaneously.
• If you select CINEMA DSP sound field program and activate
the Zone B speakers, Virtual CINEMA DSP activates
automatically (see page 36).

■ Selecting the component connected to
the MULTI CH INPUT jacks as the input
source
Use this feature to select the component connected to the
MULTI CH INPUT jacks (see page 17) as the input
source.
Press NINPUT l / h repeatedly (or press
4AMP and then press BMULTI CH IN) so that
“MULTI CH” appears in the front panel display.
y
Use “MULTI CH SET” menu in “INPUT MENU” to set the
parameter for MULTI CH INPUT (see page 49).

Notes
• The input signals are amplified and output directly without
sound processing. Therefore, you cannot activate sound field
programs, the night listening mode, etc. while MULTI CH is
selected as the input source.
• When headphones are used, signals are output only from the
front left and right channels.

30 En

01EN_RX-V363_U.book Page 31 Thursday, January 31, 2008 3:52 PM

Playback

■ Selecting audio input jacks
(AUDIO SELECT)

2

This unit comes with a variety of input jacks. Use this
feature (audio input jack select) to switch the input jack
assigned to an input source when more than one jacks are
assigned to an input source.
y
• We recommend setting audio input jack select to “AUTO” in
most cases.
• You can adjust the default audio input jack select of this unit by
using “AUDIO SELECT” in “OPTION MENU” (see page 50).

Press OAUDIO SELECT (or press 4AMP and
then CAUDIO SEL) repeatedly to select the
desired Audio input jack select setting.
DVR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

CD

A.SEL:AUTO
AUTO

ANALOG

Automatically selects input signals in the
following order:
(1) Digital signals
(2) Analog signals
Selects only analog signals. If no analog
signals are input, no sound is output.

Note
This feature is not available when no digital input jack are
assigned to the currently selected input source.

■ Selecting the night listening mode
The night listening modes are designed to improve
listenability at lower volumes or at night.

1

Press 4AMP and then press MNIGHT
repeatedly to select “NIGHT:CINEMA” or
“NIGHT:MUSIC”.
Choices: NIGHT:CINEMA, NIGHT:MUSIC,
NIGHT OFF
• Select “NIGHT:CINEMA” to reduce the dynamic
range of film soundtracks and make dialog easier to
hear at lower volumes.
• Select “NIGHT:MUSIC” to preserve
ease-of-listening for all sounds.
• Select “NIGHT OFF” if you do not want to use this
feature.

y
“NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are
stored independently.

Notes
• You cannot use the night listening modes in the following cases:
– when the component connected to the MULTI CH INPUT
jacks is selected as the input source.
– when headphones are connected to the PHONES jack.
– when the sampling frequency of the input sources are higher
than 96 kHz.
• The night listening modes may vary in effectiveness depending
on the input source and surround sound settings you use.

■ Adjusting the tonal quality
Use this feature to adjust the balance of bass and treble for
the front left and right speaker channels.

BASIC
OPERATION

Audio input jack select setting

Press 7l / h to adjust the effect level while
“NIGHT:CINEMA” or “NIGHT:MUSIC” is
displayed in the front panel display.
Choices: MIN, MID, MAX
• Select “MIN” for minimum compression.
• Select “MID” for standard compression.
• Select “MAX” for maximum compression.

Press JTONE CONTROL repeatedly to select
“BASS” or “TREBLE” and then press
KPROGRAM l / h to adjust the corresponding
frequency response level.
Control range: –10 to +10 dB
Control step: 2
• Select “BASS” to adjust the low-frequency response.
• Select “TREBLE” to adjust the high-frequency
response.
Notes
• Speaker and headphone adjustments are stored independently.
• If you increase or decrease the high-frequency or low-frequency
sound to an extreme level, the tonal quality of the surround
speakers may not match that of the front left and right speakers.

y
When a night listening mode is selected, the NIGHT
indicator lights up in the front panel display.

English

31 En

01EN_RX-V363_U.book Page 32 Thursday, January 31, 2008 3:52 PM

Playback

■ Adjusting speaker levels during
playback
You can adjust the output level of each speaker while
listening to a music source.

■ Displaying the signal information
You can display the format, sampling frequency, channel,
bit rate and flag data of the current input signal.

1

Note
This operation will override the level adjustment made in “SP
LEVEL” (see page 46).

1

Press 4AMP and then press 6LEVEL
repeatedly to select the speaker you want to
adjust.
Display

Adjusted speaker

FRONT L

Front left speaker

FRONT R

Front right speaker

CENTER

Center speaker

SWFR

Subwoofer

SUR.L

Surround left speaker

SUR.R

Surround right speaker

;BASIC SETUP
2

Press 7k / n repeatedly to select “SIGNAL
INFO” and then press 7ENTER.

3

Press 7k / n to switch the displayed
information.
The following information about the input source
appears in the front panel display.
Display

y
Once you press 6LEVEL on the remote control, you can
also select the speaker by pressing 7k / n.

2

Press 4AMP and then press HMENU on
the remote control.
“BASIC SETUP” appears in the front panel display.

Press 7l / h on the remote control to
adjust the speaker output level.
The control range is from –10 dB to +10 dB.

Description

Format

Signal format.

Sampling
frequency

The number of samples per second taken
from a continuous signal to make a discrete
signal.

Channel

The number of source channels in the input
signal (front/surround/LFE).

Bit rate

The number of bits passing a given point
per second.

Flag data

Flag data encoded in DTS, Dolby Digital,
or PCM signals that cue this unit to
automatically switch decoders.

y
You can press DA/B/C/D/E to select a speaker and then
EPRESET/TUNING l / h to adjust the speaker output level.

32 En

4

Press HMENU to exit.

01EN_RX-V363_U.book Page 33 Thursday, January 31, 2008 3:52 PM

Playback

■ Using the sleep timer
Use this feature to automatically set this unit to the
standby mode after a certain amount of time.
Press 4AMP and then press OSLEEP
repeatedly to set the amount of time.
Each time you press OSLEEP, the front panel display
changes as shown below.
SLEEP 120min
SLEEP OFF

SLEEP 30min

SLEEP 90min

■ Playing video sources in the
background
You can combine a video image from a video source with
sound from an audio source. For example, you can enjoy
listening to classical music while viewing beautiful
scenery from the video source on the video monitor.
Press the input selector buttons (3) on the
remote control to select a video source and then
an audio source.

SLEEP 60min
CD

The SLEEP indicator flashes while you are switching the
amount of time for the sleep timer. Once the sleep timer is
set, the SLEEP indicator lights up in the front panel
display, and the display returns to the selected sound field
program.

MD/CD-R

TUNER

Audio sources
DVD

DTV/CBL

DVR

Video sources
V-AUX/DOCK

y
DVD

DTV/CBL

BASIC
OPERATION

• To cancel the sleep timer, press OSLEEP on the remote
control repeatedly until “SLEEP OFF” appears in the front
panel display.
• You can also cancel the sleep timer setting by pressing
ASTANDBY/ON (or ESTANDBY) to set this unit to the
standby mode.

DVR

Video sources
V-AUX/DOCK

MULTI CH IN

9

Audio sources

English

33 En

01EN_RX-V363_U.book Page 34 Thursday, January 31, 2008 3:52 PM

SOUND FIELD PROGRAMS

Sound field programs
This unit is equipped with a variety of precise digital
decoders that allow you to enjoy multi-channel playback
from almost any stereo or multi-channel sound source.
Press KPROGRAM l / h (or press 4AMP and
then press 0PROG l / h repeatedly).
The name of the selected sound field program appears in
the front panel display.
Notes
• When you select an input source, this unit automatically selects
the last sound field program used with the corresponding input
source.

• Sound field programs cannot be selected when the component
connected to the MULTI CH INPUT jacks is selected as the
input source (see page 30).
• When PCM signals with a sampling frequency higher than 48
kHz are input, this unit is automatically set to the “STRAIGHT”
mode (see page 36).
• When the sampling frequency of the input sources are higher
than 96 kHz, this unit does not apply any sound field programs.

y
• Choose a sound field program based on your listening
preference, not merely on the name of the program itself.
• You can select “Music Enh. 2ch” and “Music Enh. 5ch” by
pressing KENHANCER repeatedly.

Sound field program descriptions
Category

MUSIC

ENTERTAIN

MOVIE

STEREO

ENHANCER

Program

Features

Pop/Rock

CINEMA DSP processing. This program presents an image of pop, rock, or jazz live concert. The
sound field reproduces the spaciousness of a massive pavilion with an emphasis on the vividness of
vocals on the stage and solo instruments and the beats of rhythm instruments.

Hall

CINEMA DSP processing. This sound field is suitable for classic and orchestral music. The
program uses data collected in a large concert hall in Munich. You can enjoy delicate and beautiful
reverberation and a majestic atmosphere.

Jazz

CINEMA DSP processing. The sound field is suitable for jazz and fusion music.
It uses data collected in a famous jazz club in New York. You can enjoy clear reverberation.

Game

CINEMA DSP processing. You can enjoy dynamic and thrilling sound effects as you play games.
The program lets you feel the depth and three-dimensional surrounding sounds of the field where
you are playing, and offers cinema-like surrounding sound effects for the scenes of movies.

TV Sports

CINEMA DSP processing. You can enjoy sports relays broadcast in stereo and variety shows with
a live sound environment. For sports relays, the voices of commentators and announcers come
clearly from the center; the cheers and atmosphere in the stadium spread around within a
comfortable range, and you can feel like as if you are in the stadium.

Movie Spacious

CINEMA DSP processing. The sound field is suitable for movies with an emphasis on spectacular
sound effects, and is a perfect fit with a wide screen. The program reproduces a wide dynamic
range from minimum sound effects to powerful sounds.

Movie Dramatic

CINEMA DSP processing. This sound field is also suitable for movies with an emphasis on
three-dimensional sound effects. It restrains reverberation to an moderate extent, but reproduces
sound effects and background music in a soft, three-dimensional manner with clarity and center
orientation of voices as pivots.

2ch Stereo

Downmixes multi-channel sources to 2 channel or plays back 2-channel sources as they are.

5ch Stereo

CINEMA DSP processing. Using this program increases the listening position range. This is a
sound field suitable for background music at parties.

Music Enh. 2ch
Music Enh. 5ch

Select these programs to play back compression artifacts (such as the MP3 format) in 2-channel or
5-channel stereo. This program enhances your listening experience by regenerating the missing
harmonics in a compression artifact.

Note
The sound field programs of this unit are recreations of real-world acoustic environments made from precise measurements taken in the
actual concert hall, music venue, movie theater, etc. Thus, you may notice variations in the strength of the reflections coming from the
front, back, left and right.

34 En

01EN_RX-V363_U.book Page 35 Thursday, January 31, 2008 3:52 PM

Sound field programs

■ Selecting decoders for 2-channel
sources (surround decode mode)

y

Signals input from 2-channel sources can also be played
back on multi-channels.

For Pop/Rock, Hall, Jazz, Game, TV Sports,
Movie Spacious and Movie Dramatic:

Press 4AMP and then press LSUR. DECODE
repeatedly to select a decoder.
You can select from the following decoders depending on
the type of source you are playing and your personal
preference.
STANDARD

Functions

Initial settings are indicated in bold under each parameter.

DSP level
Function:
Choices:

For PRO LOGIC II Music:
Panorama
Function:

Dolby Pro Logic processing for any
sources

Choices:

PLII Movie

Dolby Pro Logic II processing for
movie sources

Dimension
Function:

PLII Music

Dolby Pro Logic II processing for
music sources

PLII Game

Dolby Pro Logic II processing for
game sources

You can enjoy good quality sound with the factory default
parameters. Although you do not have to change the initial
settings, you can change some of the parameters to better
suit the input source or your listening room.

1

While listening to a source, press 4AMP
and then press 7k / n to select the desired
parameter.

2

Press 7l / h to change the parameter
value.

Note

PANORAMA
Sends stereo signals to the surround
speakers as well as the front speakers
for a wraparound effect.
OFF, ON

DIMENSION
Gradually adjusts the sound field
either towards the front or towards the
rear.
Control range: –3 (towards the rear) to +3 (towards
the front), initial setting is STD
(standard).
Center width CT WIDTH
Function:
Adjusts the center image from all
three front speakers to varying
degrees. A larger value adjusts the
center image towards the front left and
right speakers.
Control range: 0 (center channel sound is output only
from center speaker) to 7 (center
channel sound is output only from
front left and right speakers), initial
setting is 3.

BASIC
OPERATION

PRO LOGIC

■ Editing sound fields parameters

DSP LEVEL
Adjusts the effect level.
MIN, MID, MAX

For Music Enh. 2ch and Music Enh. 5ch
Effect level
Function:
Choices:

EFCL LVL
Adjusts the effect level.
LOW, HIGH

You cannot change parameter values when “MEM.GUARD” in
“OPTION MENU” is set to “ON” (see page 50).

English

35 En

01EN_RX-V363_U.book Page 36 Thursday, January 31, 2008 3:52 PM

Sound field programs

■ Using sound field programs without
surround speakers (Virtual CINEMA DSP)

■ Enjoying unprocessed input sources
(Straight decoding mode)

Virtual CINEMA DSP allows you to enjoy the CINEMA
DSP programs without surround speakers by creating
virtual speakers.
If you set “SUR. LR” to “NONE” (see page 47), Virtual
CINEMA DSP is automatically activated whenever you
select a sound field program (see page 34).

When this unit is in the “STRAIGHT” mode,
multi-channel sources are decoded straight into the
appropriate channels without any additional effect
processing. 2-channel stereo sources are output from only
the front left and right speakers.

Note
Virtual CINEMA DSP will not be activated even when “SUR.
LR” is set to “NONE” (see page 45) in the following cases:
– when “5ch Stereo” (see page 34) is selected.
– when headphones are connected to the PHONES jack.

■ Enjoying multi-channel sources and
sound field programs with headphones
(SILENT CINEMA)
SILENT CINEMA allows you to enjoy multi-channel
music or movie sound, including Dolby Digital and DTS
sources, through ordinary headphones. SILENT CINEMA
is automatically activated whenever you connect
headphones to the PHONES jack while listening to sound
field programs (except for 2ch Stereo and Music Enh. 2ch)
(see page 34). When SILENT CINEMA is activated, the
SILENT CINEMA indicator lights up in the front panel
display.

36 En

Press LSTRAIGHT (or press 4AMP and then
ASTRAIGHT) to select “STRAIGHT”.
To deactivate the “STRAIGHT” mode, press
LSTRAIGHT (or ASTRAIGHT) again so that
“STRAIGHT” disappears from the front panel display.

01EN_RX-V363_U.book Page 37 Thursday, January 31, 2008 3:52 PM

FM/AM TUNING

FM/AM tuning
There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and
there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use
the automatic and manual preset tuning features to store up to 40 stations.

Automatic tuning

Manual tuning

Automatic tuning is effective when station signals are
strong and there is no interference.

If the signal received from the station you want to select is
weak, tune into it manually.

1

Note

Press NINPUT l / h repeatedly so that
“TUNER” is displayed in the front panel
display.
Press CBAND to select the reception band
(FM or AM).

3

Press GTUNING AUTO/MAN’L so that the
AUTO indicator lights up in the front panel
display.
Lights up

1

Press NINPUT l / h repeatedly so that
“TUNER” is displayed in the front panel
display.

2

Press CBAND to select the reception band
(FM or AM).

3

Press GTUNING AUTO/MAN’L so that the
AUTO indicator disappears from the front
panel display.

AUTO

A

AM 1440 kHz

BASIC
OPERATION

2

Manually tuning into an FM station automatically switches the
tuner to monaural reception to increase the signal quality.

No colon (:)

A

If a colon (:) appears in the front panel display,
automatic tuning is not possible. Press
BPRESET/TUNING to turn the colon (:) off.

4

Press EPRESET/TUNING l / h once to
begin automatic tuning.
When this unit is tuned into a station, the TUNED
indicator lights up and the frequency of the received
station is shown in the front panel display.
Lights up

AM 1440 kHz

No colon (:)

If a colon (:) appears in the front panel display,
manual tuning is not possible. Press
BPRESET/TUNING to turn the colon (:) off.

4

Press EPRESET/TUNING l / h to tune
into the desired station manually.
You can hold down the button to continue searching.

AUTO TUNED

A

AM 1530 kHz

English

37 En

01EN_RX-V363_U.book Page 38 Thursday, January 31, 2008 3:52 PM

FM/AM tuning

Automatic preset tuning

Manual preset tuning

You can use the automatic preset tuning feature to store
FM stations with strong signals up to 40 (A1 to E8: 8
preset station numbers in each of the 5 preset station
groups) of those stations in order. You can then recall any
preset station easily by selecting the preset station number.

1

2
3

Press NINPUT l / h repeatedly so that
“TUNER” is displayed in the front panel
display.
Press CBAND to select “FM” as the
reception band.

You can also store up to 40 stations (A1 to E8: 8 preset
station numbers in each of the 5 preset station groups)
manually.

1

Tune into a station automatically or manually.
See page 37 for tuning instructions.

2

Press FMEMORY.
The MEMORY indicator flashes in the front panel
display for approximately 30 seconds.

3

Press DA/B/C/D/E and
EPRESET/TUNING l / h repeatedly to
select a preset station group and number (A1
to E8) while the MEMORY indicator is
flashing.
Check that the colon (:) appears in the front panel
display.

Press and hold FMEMORY for more than 3
seconds.
The preset station number as well as the MEMORY
and AUTO indicators flashes. After approximately 5
seconds, automatic presetting starts from the current
frequency and proceeds toward the higher
frequencies.

Flashes
TUNED

Flashes

C3 : AM
AUTO

630 kHz

MEMORY

A1:FM 87.5 MHz
Flashes

When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
y

Preset station group and number

4

Press FMEMORY while the MEMORY
indicator is flashing.
The station band and frequency appear in the front
panel display with the preset station group and
number you have selected.

You can select the preset station group and the preset station
number where the first received station will be stored by pressing
DA/B/C/D/E and then EPRESET/TUNING l / h.

TUNED

C3 : AM

Notes
• Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it manually
and store it as described in “Manual preset tuning” on this page.

38 En

MEMORY

630 kHz

The displayed station has been stored as C3.

Notes
• Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
• The reception mode (stereo or monaural) is stored along with
the station frequency.

01EN_RX-V363_U.book Page 39 Thursday, January 31, 2008 3:52 PM

FM/AM tuning

Selecting preset stations
You can tune into any desired station simply by selecting
the preset station group and number under which it was
stored.
y
When performing this operation with the remote control, press
3TUNER to select “TUNER” as the input source.

1

2

Press DA/B/C/D/E (or 7A/B/C/D/E l / h)
repeatedly to select the desired preset
station group (A to E).
The preset station group letter appears in the front
panel display and changes each time you press the
button.

You can exchange the assignments of two preset stations
with each other. The example below describes the
procedure to exchange preset station “E1” with “A5”.

1

Select preset station “E1” using DA/B/C/D/E
and EPRESET/TUNING l / h.
See “Selecting preset stations” on this page.

2

Press and hold BPRESET/TUNING for
more than 3 seconds.
“E1” and the MEMORY indicator flash in the front
panel display.
Flashes
MEMORY

E1 : FM 87.5 MHz
Flashes

3

E1 : FM 87.5 MHz
y
You can select the desired preset station number (1 to 8) directly
by pressing the numeric buttons (N).

Select preset station “A5” using
DA/B/C/D/E and EPRESET/TUNING l /
h.
“A5” and the MEMORY indicator flash in the front
panel display.
See “Selecting preset stations” on this page.

BASIC
OPERATION

Press EPRESET/TUNING l / h (or
7PRESET/CH k / n) to select the desired
preset station number (1 to 8).
The preset station group and number appear in the
front panel display along with the station band and
frequency.

Exchanging preset stations

Flashes
MEMORY

A5 : FM 90.5 MHz
Flashes

4

Press BPRESET/TUNING again.
“EXCHANGE E1–A5” appears in the front panel
display and the assignments of the two preset stations
are exchanged.

English

39 En

01EN_RX-V363_U.book Page 40 Thursday, January 31, 2008 3:52 PM

USING IPOD™

Using iPod™
Once you have stationed your iPod in a Yamaha iPod universal dock (such as the YDS-10, sold separately) connected to
the DOCK terminal of this unit (see page 18), you can enjoy playback of your iPod using the supplied remote control.
Supported iPod
iPod (Click and Wheel)
iPod nano
iPod mini
Battery charge feature
Your iPod battery is automatically charged when your iPod is stationed in a Yamaha iPod universal dock connected to the
DOCK terminal of this unit as long as this unit is turned on.
Stationing your iPod to the Yamaha iPod universal dock
Once you station your iPod to the Yamaha iPod universal dock, “iPod connected” and the DOCK indicator appears in the
front panel display when “V-AUX” is selected as the input source.

Controls and functions for iPod™
V-AUX/DOCK

POWER

POWER

TV

AV

STANDBY

POWER

MUTE

A

B

C

CD

MD/CD-R

TUNER

DVD

DTV/CBL

DVR

V-AUX/DOCK

D

E

AMP

TV INPUT

TV MUTE

V-AUX/DOCK
Select “V-AUX” or “DOCK” as the input source.

TV CH

BAND LEVEL
TITLE

MENU

TV VOL

SCENE

1

2

BAND LEVEL
TITLE

3

MENU

4

VOLUME

ENTER

ENTER

RETURN

DISPLAY

REC

RETURN

l

PROG h

1

2

STRAIGHT

5

ENHANCER SUR. DECODE

3
7

MULTI CH IN AUDIO SEL

9

4

NIGHT

6
0

DISPLAY

MENU/Cursor buttons (k/n/l/h)/ENTER
Navigate the menu of your iPod.
• Press HMENU or 7l to move to the previous
menu level.
• Press 7k/n to move to the upper/lower menu
level.
• Press 7ENTER or 7h to move to the
subsequent menu, start playback of the selected
menu level, or change the selected setting.

10

8
SLEEP
ENT

REC

Playback control buttons
Control the playback of the connected iPod.
p/e: Play/pause
s: Stop
w/f: Search backward/forward
b/a: Skip backward/forward

Notes
• Operations can be also done with the controls on your iPod. Refer to the instruction manuals of your iPod for the operations on your
iPod.
• Some features may not be compatible depending on the model or the software version of your iPod.
• For a complete list of status messages that appear in the front panel display, see the “iPod” section in “Troubleshooting” on page 58.

40 En

01EN_RX-V363_U.book Page 41 Thursday, January 31, 2008 3:52 PM

USING BLUETOOTH™ COMPONENTS

Using Bluetooth™ components
You can connect a Yamaha Bluetooth adapter (such as YBA-10, sold separately) to the DOCK terminal of this unit and
enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between
this unit and the Bluetooth component. You need to perform “pairing” the connected Bluetooth adapter and your
Bluetooth component in advance.

Pairing the Bluetooth™ adapter
and your Bluetooth™ component
Pairing must be performed when using a Bluetooth
component with the Bluetooth adapter connected to this
unit for the first time or if the pairing data has been
deleted. “Pairing” refers to the operation of registering a
Bluetooth component for Bluetooth communications.

Note
If the Bluetooth adapter is not connected to the DOCK
terminal of this unit, “No BT adapter” appears in the front
panel display.

Check that the Bluetooth component detects
the Bluetooth adapter.
If the Bluetooth component detects the Bluetooth
adapter, “YBA-10 YAMAHA” (example) appears in
the Bluetooth device list.

5

Select the Bluetooth adapter in the Bluetooth
device list and then enter the pass key
“0000” to the Bluetooth component.
When the pairing procedure is successful,
“Completed” appears in the front panel display.

y
• You only need the pairing operation for the first time that you
use the Bluetooth component with the Bluetooth adapter.
• Pairing requires operations on this unit and on the other
component with which Bluetooth communications are to be
established. If necessary, refer to the other component’s
operating instructions.

There are two pairing methods: pairing by using “START
PAIRING” in “SET MENU” and quick pairing.

■ Pairing by using “SET MENU”
Use this feature to perform pairing with the video monitor.
Select “START PAIRING” in “INPUT MENU”. See
page 50 for details.

BASIC
OPERATION

4

Note
The Yamaha Bluetooth adapter can be paired with up to eight
other components. When pairing is conducted successfully with a
ninth component and the pairing data is registered, the pairing
data for the least recently used other component is cleared.

■ Quick pairing
To ensure security, a time limit of 8 minutes is set for the
pairing operation. You are recommended to read and fully
understand all the instructions before starting.

1

Press 4AMP and then press NINPUT l /
h repeatedly (or press 3V-AUX/DOCK) to
select “V-AUX” as the input source.

2

Turn on the Bluetooth component you want
to pair with.

3

Press and hold CBAND (or 6BAND) for 3
seconds.
Once the Bluetooth adapter starts pairing,
“Searching...” appears for a moment. While the
Bluetooth adapter is in the pairing mode, DOCK
indicator flashes in the front panel display.

1

Press 4AMP and then press NINPUT l /
h repeatedly (or press 3V-AUX/DOCK) to
select “V-AUX” as the input source.

2

Start playback of your Bluetooth component.
When the connected Bluetooth adapter detects the
Bluetooth component, “BT connected” and the
DOCK indicator appears in the front panel display.

y
• When you press 7ENTER on the remote control, the
connected Bluetooth adapter searches and connect to the last
connected Bluetooth component. If the Bluetooth adapter
cannot find the Bluetooth component, “Not found” appears in
the front panel display.
• To disconnect the Bluetooth adapter from the Bluetooth
component, press 8RETURN.

41 En

English

y
To cancel the pairing, press CBAND (or 6BAND) again.

Playback of the Bluetooth™
component

01EN_RX-V363_U.book Page 42 Thursday, January 31, 2008 3:52 PM

RECORDING

Recording
Recording adjustments and other operations are performed from the recording components. Refer to the operating
instructions for those components.
Notes
• When this unit is set to the standby mode, you cannot record between other components connected to this unit.
• The settings of TONE CONTROL (see page 31) and VOLUME settings, speaker levels (see page 32) and the sound field programs
(see page 34) do not affect recorded material.
• The source connected to the MULTI CH INPUT jacks on this unit cannot be recorded.
• Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording. Therefore, if
your source component is connected to provide only digital signals, you cannot record the source.
• A given input source is not output on the same AUDIO OUT (REC) channel.
• The analog audio signals input at the DOCK terminal can be output at the analog AUDIO OUT (REC) jacks for recording.
• Once you have connected a recording component to this unit, keep the component turned on while using this unit. If the component is
turned off, this unit may distort the sound from other components.
• Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright
laws.

y
Do a test recording before you start an actual recording.

If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture
itself may be disturbed due to those signals.

1

Turn on all the connected components.

2

Press NINPUT l / h repeatedly (or press
one of the input selector buttons (3)) to
select the source component you want to
record from.

42 En

3

Start playback on the selected source
component or select a broadcast station.

4

Start recording on the recording component.

01EN_RX-V363_U.book Page 43 Thursday, January 31, 2008 3:52 PM

Set menu

Set menu
You can use the following parameters in set menu to adjust a variety of system settings and customize the way this unit
operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.

■ Basic setup

BASIC SETUP
Use this feature to automatically adjust speaker and system parameters (see page 22).

■ Manual setup MANUAL SETUP
Use this feature to manually adjust speaker and system parameters.
Sound menu 1 SOUND MENU
Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or
compensate for video signal processing delays when using LCD monitors or projectors.
Parameter

Page

A)SPEAKER SET

Selects the size of each speaker, the speakers for low-frequency signal output, the crossover
frequency, and the location of the front speakers connected to the FRONT B terminals.

45

B)SP LEVEL

Adjusts the output level of each speaker.

46

C)SP DISTANCE

Adjusts the distance of each speaker.

47

D)CENTER GEQ

Adjusts the tonal quality of the center speaker.

47

E)LFE LEVEL

Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.

47

F)D.RANGE

Adjusts the dynamic range of Dolby Digital or DTS signals.

47

G)AUDIO SET

Adjusts the muting level, audio delay settings, maximum volume level and initial volume
level.

48

ADVANCED
OPERATION

Features

Input menu 2 INPUT MENU
Use this menu to manually reassign the input jacks, select the input mode or rename the input source.
Parameter

Features

Page

A)INPUT ASSIGN

Assigns the input jacks on this unit according to the component to be used.

48

B)INPUT RENAME

Changes the name of the input source.

49

C)VOLUME TRIM

Adjusts the output volume of each jack.

49

D)DECODER MODE

Selects the decoder mode for the sources connected to the DIGITAL INPUT jacks on the
rear panel of this unit.

49

E)MULTI CH SET

Select the video source played in the background of the sources in put from the MULTI CH
INPUT jacks.

49

English

43 En

01EN_RX-V363_U.book Page 44 Thursday, January 31, 2008 3:52 PM

Set menu

Option menu 3 OPTION MENU
Use this menu to manually adjust the optional system parameters.
Parameter

Features

Page

A)DISPLAY SET

Adjusts the brightness of the front panel display.

50

B)MEMORY GUARD

Locks sound field program parameters and other set menu settings.

50

C)AUDIO SELECT

Designates the default audio input jack select setting mode for the input sources connected
to the DIGITAL INPUT jacks when you turn on the power of this unit.

50

D)PARAM. INI

Sets all the parameters of the sound field programs to the initial factory settings.

50

E)BLUETOOTH

Pairs the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with a
Bluetooth component (see page 41).

50

■ Signal information SIGNAL INFO
Use this feature to check audio signal information (see page 32).

Using set menu

4

Use the remote control to access and adjust each
parameter.
y
You can change the set menu parameters while this unit is
reproducing sound.

1

1 SOUND MENU

Press 4AMP and then press HMENU on
the remote control.
“BASIC SETUP” appears in the front panel display.

2 INPUT MENU

. BASIC SETUP
2

Press 7 k / n to select “MANUAL SETUP”.

3 OPTION MENU

5

Press 7k / n repeatedly and then press
7ENTER to select and enter the desired
submenu.
• Repeat this step to navigate to and enter the items
you want to adjust.
• To return to the previous menu level, press
8RETURN.

6

Press 7k / n to select the desired parameter
and then 7l / h to change the parameter
value.
• Press 7h to increase the value.
• Press 7l to decrease the value.

7

Press HMENU to exit from set menu.

. MANUAL SETUP
3

Press 7ENTER to enter “MANUAL SETUP”.
“1 SOUND MENU” appears in the front panel
display.

1 SOUND MENU

44 En

Press 7k / n repeatedly and then press
7ENTER to select and enter the desired
menu.
The following menus appear in the front panel
display as you press 7k / n repeatedly.

01EN_RX-V363_U.book Page 45 Thursday, January 31, 2008 3:52 PM

Set menu

1 SOUND MENU
Use this menu to manually adjust any speaker settings or
compensate for video signal processing delays when using
LCD monitors or projectors.

■ Speaker settings A)SPEAKER SET
Use this feature to manually adjust any speaker settings.
FRONT B speaker setting FRONT B
Use this feature to select the location of the front speakers
connected to the FRONT B terminals.
Choices: FRONT, ZONE B
• Select “FRONT” to turn FRONT A and B on and off
when the FRONT B speakers are set in the main zone.
• Select “ZONE B” if the speakers connected to the
FRONT B terminals are set in another zone. If FRONT
A is turned off and FRONT B is turned on, all the
speakers including the subwoofer in the main zone are
muted and this unit outputs sound at the FRONT B
terminals only.
Notes

Front speakers FRONT
Choices: LARGE, SMALL
When the front speakers are large
Select “LARGE” (large).
When the front speakers are small
Select “SMALL” (small).
Note
When “BASS OUT” is set to “FRNT” (see page 46), you can
select only “LARGE” in “FRONT”. If the value of “FRONT” is
set to a setting other than “LARGE” in advance, this unit
automatically changes the value to “LARGE”.

Center speaker CENTER
Choices: NONE, SML, LRG
When the center speaker is large
Select “LRG” (large).
When the center speaker is small
Select “SML” (small).
When you do not use the center speaker
Select “NONE” (none). The center channel signals are
directed to the front left and right speakers.
Surround left/right speakers SUR. LR
Choices: NONE, SML, LRG

ADVANCED
OPERATION

• If you connect headphones to the PHONES jack on this unit, the
sound is output from both headphones and the FRONT B
terminals when “FRONT B” is set to “ZONE B”.
• If a DSP program is selected when “FRONT B” is set to
“ZONE B”, this unit automatically enters the Virtual CINEMA
DSP mode (see page 36).

Woofer section of a speaker is 16 cm (6.5 in) or larger:
large
Woofer section of a speaker is smaller than 16 cm
(6.5 in): small

When the surround speakers are large
Select “LRG” (large).
When the surround speakers are small
Select “SML” (small).
When you do not use the surround speakers
Select “NONE” (none). This unit is set to the Virtual
CINEMA DSP mode (see page 36).

English

45 En

01EN_RX-V363_U.book Page 46 Thursday, January 31, 2008 3:52 PM

Set menu

LFE/Bass out BASS OUT
Use this feature to select the speakers that output the LFE
(low-frequency effect) and the low-frequency signals.
Choices: SWFR, FRNT, BOTH
y
If you are not satisfied with the bass sounds from your speakers,
you can change these settings according to your preference.

When a subwoofer is connected to this unit
and you want to get natural bass sound
Select “SWFR” (subwoofer). The LFE signals as well
as the low-frequency signals of other speakers set to
“SML” (or “SMALL”) are directed to the subwoofer.
When a subwoofer is connected to this unit
and you want to get rich bass sound
Select “BOTH” (both). The low-frequency signals of
any source are output from the subwoofer. The LFE
signals as well as the low-frequency signals of other
speakers set to “SML” (or “SMALL”) are directed to
the subwoofer. The low-frequency signals of the front
left and right channels are directed to the front left and
right speakers and the subwoofer regardless of the
“FRONT” setting (see page 45).
When you do not use a subwoofer
Select “FRNT” (front). The LFE signals, the
low-frequency signals of the front left and right
channels, and the low-frequency signals of other
speakers set to “SML” (or “SMALL”) are all directed
to the front left and right speakers regardless of the
“FRONT” setting (see page 45).
Crossover CROSSOVER
Use this feature to select a crossover frequency of all the
speakers set to “SML” (or “SMALL”) or to “NONE” in
“SPEAKER SET” (see pages 44 and 45). All frequencies
below the selected frequency will be sent to the subwoofer
or to the speakers set to “LRG” (or “LARGE”) in
“SPEAKER SET” (see pages 44 and 45).
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,
120Hz, 160Hz, 200Hz
Subwoofer phase SWFR PHASE
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
Choices: NRM, REV
• Select “NRM” if you do not want to reverse the phase
of your subwoofer.
• Select “REV” to reverse the phase of your subwoofer.

46 En

■ Speaker level B)SP LEVEL
Use this feature to manually adjust the output level of each
speaker.
Control range: –10 to +10 dB
Control step: 1 dB
Initial setting: 0 dB
SP LEVEL

Adjusted speaker

FL

Front left speaker

FR

Front right speaker

C

Center speaker

SL

Surround left speaker

SR

Surround right speaker

SWFR

Subwoofer

Note
The available speaker channels differ depending on the setting of
the speakers.

01EN_RX-V363_U.book Page 47 Thursday, January 31, 2008 3:52 PM

Set menu

■ Speaker distance C)SP DISTANCE
Use this feature to manually adjust the distance of each
speaker and the delay applied to the respective channel.
Ideally, each speaker should be the same distance from the
main listening position. However, this is not possible in
most home situations. Thus, a certain amount of delay
must be applied to the sound from each speaker so that all
sounds will arrive at the listening position at the same
time.
Unit UNIT
Choices: meters (m), feet (ft)
Initial setting:
[U.S.A. and Canada models]: feet (ft)
[Other models]: meters (m)
• Select “meters” to adjust speaker distances in meters.
• Select “feet” to adjust speaker distances in feet.
Speaker distances
Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)
Control step: 0.10 m (0.5 ft)
Initial setting:
FRONT L/FRONT R/SWFR: 3.00 m (10.0 ft)
CENTER: 2.60 m (8.5 ft)
SUR. L/SUR. R: 2.40 m (8.0 ft)
SP DISTANCE

Adjusted speaker
Front left speaker

FRONT R

Front right speaker

CENTER

Center speaker

SUR. L

Surround left speaker

SUR. R

Surround right speaker

SWFR

Subwoofer

Following is an example where “100Hz” is selected as the
frequency band.

100Hz--||--

0

Test tone TEST
Use this feature to make adjustments for “CENTER GEQ”
while listening to a test tone.
Choices: OFF, ON
• Select “OFF” to stop test tones and output the currently
selected source component.
• Select “ON” to output test tones from the center and
front left speakers.

■ Low-frequency effect level
E)LFE LEVEL
Use this feature to adjust the output level of the LFE
(low-frequency effect) channel according to the capacity
of your subwoofer or headphones. The LFE channel
carries low-frequency special effects which are only added
to certain scenes. This setting is effective when the input
signal contains the LFE channel.
ADVANCED
OPERATION

FRONT L

y
Press 7k / n to select a frequency band and 7l / h to adjust
the selected frequency band.

Control range: –20 to 0 dB
Control step: 1 dB
Speaker LFE SP LFE
Adjusts the speaker LFE level.
Headphone LFE HP LFE
Adjusts the headphone LFE level.
Note

Note

Depending on the settings of “BASS OUT” (see page 46), some
signals may not be output at the SUBWOOFER OUTPUT jack.

The available speaker channels differ depending on the setting of
the speakers.

■ Dynamic range

■ Center graphic equalizer

D)CENTER GEQ
Use this feature to adjust the built-in 5-frequency band
(100Hz, 300Hz, 1kHz, 3kHz and 10kHz) graphic
equalizer for the center channel so that the tonal quality of
the center speaker matches that of the front speakers. You
can make adjustments while listening to the currently
selected source component or a test tone.
Control range: –6.0 to +6.0 dB
Control step: 0.5 dB
Initial setting: 0 dB

F)D.RANGE
Use this feature to select the amount of dynamic range
compression to be applied to your speakers or
headphones. This setting is effective only when this unit is
decoding Dolby Digital and DTS signals.
Choices: MIN, STD, MAX
• Select “MIN” (minimum) if you regularly listen at low
volume levels.
• Select “STD” (standard) for general use.
• Select “MAX” (maximum) to preserve the greatest
amount of dynamic range.
Speaker dynamic range SP D.R
Adjusts the speaker compression.
English

Headphone dynamic range HP D.R
Adjusts the headphone compression.

47 En

01EN_RX-V363_U.book Page 48 Thursday, January 31, 2008 3:52 PM

Set menu

■ Audio settings G)AUDIO SET
Use this feature to adjust the overall audio settings of this
unit.
Mute type MUTE TYP.
Use this feature to adjust how much the mute function
reduces the output volume (see page 30).
Choices: FULL, –20dB
• Select “FULL” to completely mute all the audio
output.
• Select “–20dB” to reduce the current volume by 20 dB.
Audio delay A.DELAY
Use this feature to delay the sound output and synchronize
it with the video image. This may be necessary when
using certain LCD monitors or projectors.
Control range: 0 to 160 ms
Control step: 1 ms
Maximum volume MAX VOL.
Use this feature to set the maximum volume level. This
feature is useful to avoid the unexpected loud sound by
mistake. For example, the original volume range is
+16 dB to –80 dB. However, when “MAX VOL.” is set to
–5 dB, the volume range becomes –5 dB to –80 dB.
Control range: +16 dB, +10 dB to –30 dB
Control step: 5 dB
Note
The “MAX VOL.” setting takes priority over the “Initial Volume”
setting. For example, if “INI.VOL.” is set to –20 dB and “MAX
VOL.” is set to –30 dB, the volume level is automatically set to
–30 dB when you turn on the power of this unit next time.

Initial volume INI.VOL.
Use this feature to set the volume level when the power of
this unit is turned on.
Choices: Off, –80 dB to +16 dB
Control step: 1 dB
Note
The “MAX VOL.” setting takes priority over the “INI.VOL.”
setting.

48 En

2 INPUT MENU
Use this menu to reassign the input jacks, select the input
mode or rename the input source.

■ Input assignment
A)INPUT ASSIGN
Use this feature to assign the input jacks according to the
component to be used if the initial settings of this unit do
not correspond to your needs. Change the following
parameters to reassign the respective jacks and effectively
connect more components.
Once the input jacks are reassigned, you can select the
corresponding component by using NINPUT l / h (or
the input selector buttons (3) on the remote control).
For DIGITAL INPUT COAXIAL jacks 1
IN (1)
Choices: (1) CD, MD/CD-R, DVD, DTV/CBL, V-AUX,
DVR
For DIGITAL INPUT OPTICAL jacks 2 and 3
IN (2)
IN (3)
Choices: (2) CD, MD/CD-R, DVD, DTV/CBL, V-AUX,
DVR
(3) CD, MD/CD-R, DVD, DTV/CBL, V-AUX,
DVR
Notes
• You cannot select a specific item more than once.
• You cannot assign the same input source to both “IN (2)” and
“IN (3)”. For example, you assign “CD” to “IN (2)”, “–––”
appears in “IN (3)”.

01EN_RX-V363_U.book Page 49 Thursday, January 31, 2008 3:52 PM

Set menu

■ Input rename B)INPUT RENAME

■ Volume trim

Use this feature to change the name of the input source
that appears in the front panel display.
The following is an example where “DVD” is renamed
“My DVD”.
DVR

DVD
1

V-AUX

DTV/CBL pDVD

MD/CD-R

TUNER

CD

My DVD

Press one of the input selector buttons (3)
or BMULTI CH IN to select the input
source you want to change the name of.
CD

MD/CD-R

TUNER

DVD

DTV/CBL

DVR

C)VOLUME TRIM
Use this feature to adjust the level of the signal input at
each jack. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.

Press one of the input selector buttons (3) or
BMULTI CH IN to select the input source you
want to adjust the level.
Choices: CD, TUNER, MD/CD-R, DVD, DTV/CBL,
V-AUX (DOCK), DVR, MULTI CH IN
Control range: –6.0 to +6.0 dB
Control step: 1.0 dB
Initial setting: 0.0 dB

■ Decoder mode
or

MULTI CH IN

V-AUX/DOCK

Press 4AMP and then press 7l / h on the
remote control to place the “_” (underscore)
under the space or the character you want to
edit.

3

Press 7k / n to select the character you
want to use and then press 7l / h to move
to the next space.
Notes
• You can use up to 8 characters for each input.
• Press 7n to change the character in the following order,
or press 7k to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#,
*, –, +, etc.)

4

Repeat steps 1 through 3 to rename each
input source.

5

Press HMENU to exit from “INPUT
RENAME”.

Decoder select mode
Use this feature to designate the default decoder mode for
the input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit.
Choices: AUTO, LAST
• Select “AUTO” if you want this unit to automatically
detect the type of input signals and select the
appropriate decoder mode.
• Select “LAST” if you want this unit to automatically
select the last decoder mode used the connected input
source.
DTS decoder prioritize setting
Choices: AUTO, DTS
• Select “AUTO” if you want this unit to automatically
detect input signal types and select the appropriate
input mode.
• Select “DTS” when you play back a DTS-CD.

ADVANCED
OPERATION

2

D)DECODER MODE

■ Multi channel input setup
E)MULTI CH SET
BGV BGV
Use this feature to select the video source played in the
background of the sources input from the MULTI CH
INPUT jacks.
Choices: LAST, DVR, V-AUX, DTV/CBL, DVD
y
Select “LAST” to set this unit to automatically select the last
selected video source as the background video source.

English

49 En

01EN_RX-V363_U.book Page 50 Thursday, January 31, 2008 3:52 PM

Set menu

■ Bluetooth setting

3 OPTION MENU
Use this menu to adjust the optional system parameters.

■ Display settings

A)DISPLAY SET

Dimmer DIMMER
Use this feature to adjust the brightness of the front panel
display.
Control range: – 4 to 0
Control step: 1
• Press 7l to make the front panel display dimmer.
• Press 7h to make the front panel display brighter.

E)BLUETOOTH

Start pairing START PAIRING
Use this feature to start pairing the connected Yamaha
Bluetooth adapter (such as YBA-10, sold separately) with
your Bluetooth component. For details about the pairing,
refer to “Pairing the Bluetooth™ adapter and your
Bluetooth™ component” on page 41.
To ensure security, a time limit of 8 minutes is set for
the pairing operation. You are recommended to read
and fully understand all the instructions before starting.

1

Memory guard MEM.GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: OFF, ON
• Select “OFF” to turn off the “MEM.GUARD” feature.
• Select “ON” to protect:
– sound field program parameters
– all set menu items
– all speaker levels
– SCENE template parameters

Select “START PAIRING” in “BLUETOOTH”
and then press 7ENTER to start pairing.
The connected Bluetooth adapter starts searching
Bluetooth components. “Searching...” appears in the
front panel display.

2

Check that the Bluetooth component detects
the Bluetooth adapter.
If the Bluetooth component the Bluetooth adapter,
“YBA-10 YAMAHA” (example) appears in the
Bluetooth device list.

Note

3

Select the Bluetooth adapter in the Bluetooth
device list and then enter the pass key
“0000” on the Bluetooth component.
Once this unit completes the pairing successfully,
“Completed” appears.

■ Memory guard

B)MEMORY GUARD

When “MEM.GUARD” is set to “ON”, you cannot select and
adjust any other set menu items.

■ Audio select C)AUDIO SELECT
Use this feature to designate the default audio input jack
select setting for the input sources when you turn on the
power of this unit.
Choices: AUTO, LAST
• Select “AUTO” if you want this unit to automatically
detect the type of input signals and select the
appropriate input mode.
• Select “LAST” if you want this unit to automatically
select the last input mode used for the connected input
source (see page 31).
■ Parameter initialization D)PARAM. INI
Use this feature to set all the parameters of the sound field
programs to the initial factory settings.
Choices: NO, YES
• Select “NO” to cancel the parameter initialization and
return to the previous menu level.
• Select “YES” to set all the sound field parameters to
the initial factory settings.
Notes
• You cannot automatically revert to the previous parameter
settings once you initialize the sound field program parameters.
• You cannot separately initialize individual sound field
programs.

50 En

y
To cancel the pairing, press 8RETURN to exit from
“START PAIRING”.

4

Press 8RETURN to exit from “START
PAIRING”.

Notes
• If the connected Bluetooth adapter cannot find any Bluetooth
components, “Not found” appears.
• If a Bluetooth adapter is not connected to this unit, “No BT
adapter” appears.

01EN_RX-V363_U.book Page 51 Thursday, January 31, 2008 3:52 PM

Remote control features

Remote control features
In addition to controlling this unit, the remote control can also operate other audiovisual components made by Yamaha
and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code
for each input source (see page 53).
-

Controlling this unit, a TV, or other components
■ Controlling this unit

■ Controlling a TV

Press 4AMP to control this unit.

Press 3DTV/CBL to control your TV. To control your
TV, set the appropriate remote control code for
3DTV/CBL (see page 53).

POWER

POWER

STANDBY

POWER

TV

AV

A

B

C

MUTE

CD

MD/CD-R

TUNER

DTV/CBL

DVD

DVR

V-AUX/DOCK

D

E

AMP

TV INPUT

TV MUTE

DTV/CBL

TV VOL

AMP
SCENE

1

2

3

MENU

POWER

STANDBY

POWER

TV

AV

A

B

C

MUTE

CD

MD/CD-R

TUNER

TV CH

*1

BAND LEVEL
TITLE

POWER

DVD

DTV/CBL

DVR

V-AUX/DOCK

D

E

AMP

TV INPUT

TV MUTE

1

2

TV CH

*1

TV VOL

4

SCENE

VOLUME

BAND LEVEL
TITLE

3

MENU

4

VOLUME

ENTER

ENTER
RETURN

*2

DISPLAY

REC
RETURN

DISPLAY

REC

PROG h

1

2

5

3

4

NIGHT

6

7

MULTI CH IN AUDIO SEL

9

*2

ENHANCER SUR. DECODE

ADVANCED
OPERATION

l

STRAIGHT

0

10

8
SLEEP
ENT

*2

l

PROG h

1

2

STRAIGHT

5

ENHANCER SUR. DECODE

3
7

MULTI CH IN AUDIO SEL

9

4

NIGHT

6
0

10

8
SLEEP
ENT

Notes
*1

These buttons always control this unit.
*2 These buttons control this unit only when 4AMP is pressed.

Notes
*1

These buttons always control your TV regardless of whether
you press 3DTV/CBL or not.
Remote control

*2

Digital TV/Cable TV

TV POWER

Turns on or off the power.

TV CH +/–

Changes the channel number.

TV VOL +/–

Increases or decreases the volume
level.

TV INPUT

Changes the input source.

TV MUTE

Mutes the audio output.

These buttons control your TV only when 3DTV/CBL is
pressed. For details, see the “Digital TV/Cable TV” column on
page 52.

y

51 En

English

You can control more than one TV by setting the appropriate
remote control code for any input source selector buttons other
than 3DTV/CBL. In such a case, you can control the buttons
highlighted above (*1 and *2) when you press the input source
selector button.

01EN_RX-V363_U.book Page 52 Thursday, January 31, 2008 3:52 PM

Remote control features

■ Controlling other components
Press one of the input selector buttons (3 ) or A to E
buttons to control other components. You must set the
appropriate remote control code for each input source in
advance (see page 53). The following table shows the
function of each control button used to control other
components assigned to each input selector button. Be
advised that some buttons may not correctly operate the
selected component.

[1]

[2]
POWER

POWER

TV

AV

A

STANDBY

POWER

B

C

MUTE

CD

MD/CD-R

TUNER

DVD

DTV/CBL

DVR

TV CH

BAND LEVEL
TITLE

[3]
[4]

MENU

VOLUME

[7]

ENTER

RETURN

[8]

DISPLAY

REC

y
• The remote control has 13 modes (input areas) to control
components so that the remote control can operate up to 13
different components.
• When you press one of the optional component control area
buttons (A to E), you can control the desired component
without changing the input source of this unit.

V-AUX/DOCK

D

E

AMP

TV INPUT

TV MUTE

1

2

[5]
TV VOL

SCENE

3

4

[6]

l

PROG h

1

2

STRAIGHT

5

ENHANCER SUR. DECODE

3
7

MULTI CH IN AUDIO SEL

9

4

NIGHT

6
0

10

8
SLEEP
ENT

[9]

DVD
player/recor VCR
der

Digital TV/
Cable TV

LD player

CD player

MD/CD
recorder

[1] AV POWER

Power *1

Power *2

Power *1

Power *1

Power *1

[2] TITLE

Title

[3] PRESET/CH k

Up

VCR channel up Up

Preset up (1-8)

PRESET/CH n

Down

VCR channel
down

Down

Preset down
(1-8)

A/B/C/D/E l

Left

Left

Preset down
(A-E)

A/B/C/D/E h

Right

Right

Preset up
(A-E)

ENTER

Remote control

Power *1

Band

Enter

Enter

[4] RETURN

Return

Return

[5] REC

Disc skip
(player)
Rec (recorder)

Rec

Rec *2

p

Play

Play

Play *2

w

Search
backward

Search backward
Search backward
Search backward Search backward Search backward
*2

f

Search forward

Search forward

Search forward
*2

Search forward

Search forward

Search forward

e

Pause

Pause

Pause *2

Pause

Pause

Pause

Skip backward

Skip backward

Skip backward

Play

Disc skip

Rec

Play

Play

b

Skip backward

Skip backward

Skip backward
*2

a

Skip forward

Skip forward

Skip forward *2 Skip forward

Skip forward

Skip forward

s

Stop

Stop

Stop *2

Stop

Stop

[6] 1-9, 0, +10

Tuner

Stop

Numeric buttons Numeric buttons Numeric buttons Numeric buttons Numeric buttons Numeric buttons

[7] MENU

Menu

[8] DISPLAY

Display

Display

Display

Display

Display

Display

[9] ENT

Title/Index

Enter

Enter

Chapter/Time

Index

Index

Preset stations
(1-8)

Menu

Notes
*1
*2

This button is operational only when the original remote control supplied with the component has a POWER button.
These buttons operate your DVD recorder only when you set the appropriate remote control code for DVR (see page 53).

52 En

01EN_RX-V363_U.book Page 53 Thursday, January 31, 2008 3:52 PM

Remote control features

Setting remote control codes

2

You can control other components by setting the
appropriate remote control codes. For a complete list of
available remote control codes, refer to “List of remote
control codes” at the end of this manual.

Press the numeric buttons (0 to 9) (N) to
enter the four-digit remote control code for
the component to be used.
When the setting succeeds, “RemoteSetup OK”
appears; however, when it dues not, “RemoteSetup
NG” appears in the front panel display.

Remote control code default settings
Notes

Input
source

Component
category

Manufacturer

Default
code

CD

CD

Yamaha

5013

MD/CD-R

CD-R

Yamaha

5001

TUNER

TUNER

Yamaha

5007

■ Resetting all remote control codes

DVD

DVD

Yamaha

2000

DTV/CBL

—

—

—

Use this feature to clear all the remote control codes
previously set and reset all of them to the initial factory
settings.

V-AUX/D
OCK

TUNER

Yamaha

5011

DVR

DVR

Yamaha

2011

A

TUNER

Yamaha

5012

B

TUNER

Yamaha

5009

C

TUNER

Yamaha

5017

D

—

—

—

E

—

—

—

• If the manufacturer of your component has more than one code,
try each of them until you find the correct one.
• If you do not press any buttons within 30 seconds in step 2, the
setup process is canceled. If this happens, repeat the setup
procedure.

1

While pressing and holding 4AMP, press
2AV POWER for more than 3 seconds.
AMP

You may not be able to operate your Yamaha component even if a
Yamaha remote control code is preset as listed above. In this case,
try setting another Yamaha remote control code.

1

While pressing and holding one of the input
selector buttons (3) on the remote control to
select the input area you want to set up,
press 2AV POWER for more than 3
seconds.
A

B

C

CD

MD/CD-R

TUNER

DVD

DTV/CBL

DVR

V-AUX/DOCK

D

E

AV

While holding
down

2

Press for 3
seconds

Press the numeric buttons (N) to enter the
code number “9981”.
“RemoteSetup OK” appears in the front panel
display, and the remote control codes previously set
are cleared and reset to the initial factory settings.

ADVANCED
OPERATION

Note

POWER

y
If you do not press any buttons within 30 seconds after
step 1, the clearing process is canceled. In this case, repeat
the clearing procedure.

POWER

AV

Press for 3
seconds

While holding down

English

53 En

01EN_RX-V363_U.book Page 54 Thursday, January 31, 2008 3:52 PM

Advanced setup

Advanced setup
This unit has additional menus that are displayed in the
front panel display. The advanced setup menu offers
additional operations to adjust and customize the way this
unit operates. Change the initial settings (indicated in bold
under each parameter) to reflect the needs of your
listening environment.
Notes
• Only A STANDBY/ON, K PROGRAM l / h and
L STRAIGHT are effective while you are using the advanced
setup menu.
• No other operations can be made while you are using the
advanced setup menu.
• The advanced setup menu is only available in the front panel
display.

■ Speaker impedance SP IMP.
(U.S.A. and Canada models only)
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices: 8ΩMIN, 6ΩMIN
• Select “8ΩMIN” to set the speaker impedance to 8 Ω .
• Select “6ΩMIN” to set the speaker impedance to 6 Ω .
SP IMP.

Speaker

Impedance level

Front (A or B)
8ΩMIN

Center

The impedance of each
speaker must be 8 Ω or
higher.

Surround
Front (A or B)

1

Press ASTANDBY/ON on the front panel to
set this unit to the standby mode.

2

Press and hold JTONE CONTROL and
then press ASTANDBY/ON to turn on this
unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.

3

Press KPROGRAM l / h to select the
parameter you want to adjust.
The name of the selected parameter appears in the
front panel display.

4

Press LSTRAIGHT repeatedly to change
the selected parameter setting.

5

Press ASTANDBY/ON to confirm your
selection and set this unit to the standby
mode.

y
The settings you made are reflected next time you turn on this
unit.

54 En

6ΩMIN

Center

The impedance of each
speaker must be 6 Ω or
higher.

Surround

■ Tuner frequency step TU
(Asia and General models only)
Use this feature to set the tuner frequency step according
to the frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
• Select “AM10/FM100” for North, Central and South
America.
• Select “AM9/FM50” for all other areas.

■ Initializing PRESET
Use this feature to reset all the parameters of this unit to
the initial factory settings.
Choices: CANCEL, RESET
• Select “CANCEL” not to reset any parameters of this
unit.
• Select “RESET” to reset the parameters of this unit.
Notes
• This setting completely resets all the parameters of this unit
including the set menu parameters. However, the advanced
setup menu parameters will not be initialized.
• The initial factory settings are activated next time you turn on
this unit.

01EN_RX-V363_U.book Page 55 Thursday, January 31, 2008 3:52 PM

Troubleshooting

Troubleshooting
Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.

■ General
Problem
This unit fails to turn
on or enters the
standby mode soon
after the power is
turned on.

No sound

See
page

The power cable is not connected or the
plug is not completely inserted.

Connect the power cable firmly.

—

The speaker impedance setting is
incorrect.

Set the speaker impedance to match your speakers.

12

The protection circuitry has been
activated.

Make sure that all speaker wire connections on this
unit and on all speakers are secure and that the wire
for each connection does not touch anything other
than its respective connection.

11

This unit has been exposed to a strong
external electric shock (such as lightning
or strong static electricity).

Set this unit to the standby mode, disconnect the
power cable, plug it back in after 30 seconds and then
use it normally.

—

Incorrect input or output cable
connections.

Connect the cables properly. If the problem persists,
the cables may be defective.

13-17

No appropriate Audio input jack select has
been set.

Set an appropriate Audio input jack select.

No appropriate input source has been
selected.

Select an appropriate input source with
NINPUT l / h on the front panel (or the input
selector buttons (3) on the remote control).

Speaker connections are not secure.

Secure the connections.

11

The front speakers to be used have not
been selected properly.

Select the front speakers with ISPEAKERS.

29

The volume is turned down.

Turn up the volume.

—

The sound is muted.

Press FMUTE or IVOLUME +/– on the remote
control to resume audio output and then adjust the
volume.

30

Signals this unit cannot reproduce are
being input from a source component,
such as a CD-ROM.

Play a source whose signals can be reproduced by this
unit.

—

Audio signals input at the HDMI jack are
not output from any speaker terminals.

Make an analog or digital connection beside the
HDMI connection.

—

The setting of the connected component is
improper.

Make an appropriate setting following the instruction
manual of the connected component.

—

The protection circuitry has been activated
because of a short circuit, etc.

Check that the impedance setting is correct.

12

Check that the speaker wires are not touching each
other and then turn this unit back on.

—

The sleep timer has turned off this unit.

Turn on this unit, and play the source again.

—

The sound is muted.

Press FMUTE or IVOLUME +/– on the remote
control to resume audio output.

30

Incorrect cable connections.

Connect the cables properly. If the problem persists,
the cables may be defective.

13-17

Incorrect settings in “SP LEVEL”.

Adjust the “SP LEVEL” settings.

31
29, 30

32

55 En

English

Sound is heard from
the speaker on one
side only.

Remedy

ADDITIONAL
INFORMATION

The sound suddenly
goes off.

Cause

01EN_RX-V363_U.book Page 56 Thursday, January 31, 2008 3:52 PM

Troubleshooting

Problem

Cause

Remedy

See
page

Only the center
speaker outputs
substantial sound.

When playing a monaural source with a
CINEMA DSP program, the source signal
is directed to the center channel, and the
front and surround speakers output effect
sounds.

No sound is heard
from the center
speaker.

“CENTER” in “SPEAKER SET” is set to
“NONE”.

Set “CENTER” to “SML” or “LRG”.

45

Some sound field programs do not output
sounds from the center speaker.

Try another sound field program.

34

No sound is heard
from the surround
speakers.

“SUR. LR” in “SPEAKER SET” is set to
“NONE”.

Set “SUR. LR” to “SML” or “LRG”.

45

This unit is in the “STRAIGHT” mode
and a monaural source is being played
back.

Press LSTRAIGHT on the front panel so that
“STRAIGHT” disappears from the front panel
display.

36

No sound is heard
from the subwoofer.

“BASS OUT” in “SPEAKER SET” is set
to “FRNT” when a Dolby Digital or DTS
signal is being played.

Set “BASS OUT” to “SWFR” or “BOTH”.

46

“BASS OUT” in “SPEAKER SET” is set
to “SWFR” or “FRNT” when a 2-channel
source is being played.

Set “BASS OUT” to “BOTH”.

46

The source does not contain
low-frequency bass signals.
Dolby Digital or DTS
sources cannot be
played. (Dolby Digital
or DTS indicator in
the front panel
display does not light
up.)

The connected component is not set to
output Dolby Digital or DTS digital
signals.

Make an appropriate setting following the operating
instructions for your component.

—

Audio input jack select is set to
“ANALOG”.

Set Audio input jack select to “AUTO”.

31

A humming sound is
heard.

Incorrect cable connections.

Connect the audio cables firmly. If the problem
persists, the cables may be defective.

—

The volume level
cannot be increased,
or the sound is
distorted.

You are attempting to set the volume level
higher than the maximum volume level.

Adjust “MAX VOL.” setting.

48

The component connected to the AUDIO
OUT (REC) jacks on this unit is turned
off.

Turn on the power of the component.

—

The sound effect
cannot be recorded.

It is not possible to record the sound effect
with a recording component.

A source cannot be
recorded by an
analog component
connected to the
AUDIO OUT (REC)
jacks.

The source component is not connected to
the analog AUDIO IN jacks on this unit.

Connect the source component to the analog AUDIO
IN jacks.

The sound field
parameters and some
other settings of this
unit cannot be
changed.

“MEM.GUARD” in “OPTION MENU” is
set to “ON”.

Set “MEM.GUARD” to “OFF”.

50

This unit does not
operate properly.

The internal microcomputer has been
frozen by an external electric shock (such
as lightning or excessive static electricity)
or by a power supply with low voltage.

Disconnect the power cable from the AC wall outlet
and then plug it in again after about 30 seconds.

—

“CHECK SP WIRES”
appears in the front
panel display.

Speaker cables are short-circuited.

Make sure all speaker cables are connected correctly.

11

56 En

15, 17

01EN_RX-V363_U.book Page 57 Thursday, January 31, 2008 3:52 PM

Troubleshooting

Problem

Cause

Remedy

There is noise
interference from
digital or radio
frequency equipment.

This unit is too close to the digital or
high-frequency equipment.

The picture is
disturbed.

The video source uses scrambled or
encoded signals to prevent dubbing.

This unit suddenly
enters the standby
mode.

The internal temperature is too high and
the overheat protection circuitry has been
activated.

See
page

Move this unit further away from such equipment.

—

Wait about 1 hour for this unit to cool down and then
turn it back on.

—

■ Tuner
Problem
FM stereo reception is
noisy.

FM

The characteristics of FM stereo
broadcasts may cause this problem
when the transmitter is too far away or
the antenna input is poor.

Remedy

See
page

Check the antenna connections.

19

Try using a high-quality directional FM
antenna.

—

Use the manual tuning method.

37

There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.

There is multi-path interference.

Adjust the antenna position to eliminate
multi-path interference.

—

The desired station
cannot be tuned into
with the automatic
tuning method.

The signal is too weak.

Use a high-quality directional FM antenna.

—

Use the manual tuning method.

37

Previously preset
stations can no longer
be tuned into.

This unit has been disconnected for a
long period.

Set preset stations.

38

The desired station
cannot be tuned into
with the automatic
tuning method.

The signal is weak or the antenna
connections are loose.

Tighten the AM loop antenna connections
and orient it for the best reception.

—

Use the manual tuning method.

37

There are continuous
crackling and hissing
noises.

Noises result from lightning,
fluorescent lamps, motors, thermostats
and other electrical equipment.

Use an outdoor antenna and a ground wire.
This will help somewhat, but it is difficult to
eliminate all noise.

—

There are buzzing and
whining noises.

A TV set is being used nearby.

Move this unit away from the TV set.

—

ADDITIONAL
INFORMATION

AM

Cause

English

57 En

01EN_RX-V363_U.book Page 58 Thursday, January 31, 2008 3:52 PM

Troubleshooting

■ iPod
Note
In case of a transmission error without a status message appearing in the front panel display, check the connection to your iPod (see
page 18).

Status message

Connect error

Cause
There is a problem with the signal path
from your iPod to this unit.

Unknown iPod

The iPod being used is not supported by
this unit.

iPod connected

Your iPod is properly stationed in a
Yamaha iPod universal dock (such as
YDS-10, sold separately) connected to the
DOCK terminal of this unit, and the
connection between your iPod and this
unit is complete.

Disconnected

Your iPod was removed from a Yamaha
iPod universal dock (such as YDS-10,
sold separately) connected to the DOCK
terminal of this unit.

Remedy

See
page

Turn off this unit and reconnect the Yamaha iPod
universal dock to the DOCK terminal of this unit.

18

Try resetting your iPod.

—

Only iPod (Click and Wheel), iPod nano, and iPod
mini are supported.

—

Station your iPod back in a Yamaha iPod universal
dock (such as YDS-10, sold separately) connected to
the DOCK terminal of this unit.

18

■ Bluetooth
Status message

Searching...

Cause

Remedy

See
page

The Bluetooth adapter and the Bluetooth
component is in the middle of the pairing.
The Bluetooth adapter and the Bluetooth
component is in the middle of establishing
the connection.

Completed

The paring is completed.

Canceled

The paring is canceled.

BT connected

The connection between the Yamaha
Bluetooth adapter (such as YBA-10, sold
separately) and the Bluetooth component
is established.

Disconnected

The Bluetooth component is disconnected
from the Bluetooth adapter (such as
YBA-10, sold separately).

No BT adapter

The Bluetooth adapter is not connected to
the DOCK terminal.

58 En

Connect the Yamaha Bluetooth adapter (such as
YBA-10, sold separately) to the DOCK terminal.

18

01EN_RX-V363_U.book Page 59 Thursday, January 31, 2008 3:52 PM

Troubleshooting

■ Remote control
Problem
The remote control
does not work nor
function properly.

Cause

Remedy

See
page

Wrong distance or angle.

The remote control functions within a maximum
range of 6 m (20 ft) and no more than 30 degrees
off-axis from the front panel.

21

Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.

Reposition this unit.

—

The batteries are weak.

Replace all batteries.

3

The remote control code is not correctly
set.

Set the remote control code correctly using “List of
remote control codes” at the end of this manual.

53

Try setting another code for the same manufacturer
using “List of remote control codes” at the end of this
manual.

53

Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.

■ Resetting the system
Use this feature to reset all the parameters of this unit to
the initial factory settings.

1

Press ASTANDBY/ON on the front panel to
set this unit to the standby mode.

Notes
• This procedure completely resets all the parameters of this unit
including the set menu parameters.
• The initial factory settings are activated next time you turn on
this unit.

y
Press and hold JTONE CONTROL and
then press ASTANDBY/ON to turn on this
unit.
The advanced setup menu appears in the front panel
display.

3

Press KPROGRAM l / h to select
“PRESET”.

4

Press LSTRAIGHT repeatedly to select
“RESET”.
Select “CANCEL” to cancel the initialization
procedure without making any changes.

5

Press ASTANDBY/ON to confirm your
selection and set this unit to the standby
mode.

To cancel the initialization procedure at any time without making
any changes, press LSTRAIGHT repeatedly to select
“CANCEL” and then press ASTANDBY/ON.

ADDITIONAL
INFORMATION

2

English

59 En

01EN_RX-V363_U.book Page 60 Thursday, January 31, 2008 3:52 PM

Glossary

Glossary
■ Audio information
Dolby Digital
Dolby Digital is a digital surround sound system that gives
you completely independent multi-channel audio. With 3
front channels (front L/R and center), and 2 surround
stereo channels, Dolby Digital provides 5 full-range audio
channels. With an additional channel especially for bass
effects, called LFE (Low Frequency Effect), the system
has a total of 5.1-channels (LFE is counted as 0.1
channel). By using 2-channel stereo for the surround
speakers, more accurate moving sound effects and
surround sound environment are possible than with Dolby
Surround. The wide dynamic range from maximum to
minimum volume reproduced by the 5 full-range channels
and the precise sound orientation generated using digital
sound processing provide listeners with unprecedented
excitement and realism. With this unit, any sound
environment from monaural up to a 5.1-channel
configuration can be freely selected for your enjoyment.
Dolby Pro Logic II
Dolby Pro Logic II is an improved technique used to
decode vast numbers of existing Dolby Surround sources.
This new technology enables a discrete 5-channel
playback with 2 front left and right channels, 1 center
channel, and 2 surround left and right channels instead of
only 1 surround channel for conventional Pro Logic
technology. There are three modes available: “Music
mode” for music sources, “Movie mode” for movie
sources and “Game mode” for game sources.
Dolby Surround
Dolby Surround uses a 4-channel analog recording system
to reproduce realistic and dynamic sound effects: 2 front
left and right channels (stereo), a center channel for dialog
(monaural), and a surround channel for special sound
effects (monaural). The surround channel reproduces
sound within a narrow frequency range. Dolby Surround is
widely used with nearly all video tapes and laser discs,
and in many TV and cable broadcasts as well. The Dolby
Pro Logic decoder built into this unit employs a digital
signal processing system that automatically stabilizes the
volume on each channel to enhance moving sound effects
and directionality.

60 En

DTS Digital Surround
DTS digital surround was developed to replace the analog
soundtracks of movies with a 5.1-channel digital sound
track, and is now rapidly gaining popularity in movie
theaters around the world. DTS, Inc. has developed a
home theater system so that you can enjoy the depth of
sound and natural spatial representation of DTS digital
surround in your home. This system produces practically
distortion-free 5.1-channel sound (technically, left, right
and center channels, 2 surround channels, plus an LFE 0.1
channel as a subwoofer, for a total of 5.1-channels).
LFE 0.1 channel
This channel reproduces low-frequency bass signals. The
frequency range of this channel is from 20 Hz to 120 Hz.
This channel is counted as 0.1 because it only enforces a
low-frequency range compared to the full-range
reproduced by the other 5 channels in Dolby Digital or
DTS 5.1-channel systems.
PCM (Linear PCM)
Linear PCM is a signal format under which an analog
audio signal is digitized, recorded and transmitted without
using any compression. This is used as a method of
recording CDs and DVD audio. The PCM system uses a
technique for sampling the size of the analog signal per
very small unit of time. Standing for “Pulse Code
Modulation”, the analog signal is encoded as pulses and
then modulated for recording.
Sampling frequency and number of quantized
bits
When digitizing an analog audio signal, the number of
times the signal is sampled per second is called the
sampling frequency, while the degree of fineness when
converting the sound level into a numeric value is called
the number of quantized bits. The range of rates that can
be played back is determined based on the sampling rate,
while the dynamic range representing the sound level
difference is determined by the number of quantized bits.
In principle, the higher the sampling frequency, the wider
the range of frequencies that can be played back, and the
higher the number of quantized bits, the more finely the
sound level can be reproduced.

01EN_RX-V363_U.book Page 61 Thursday, January 31, 2008 3:52 PM

Glossary

■ Sound field program information

■ Video information

CINEMA DSP
Since the Dolby Surround and DTS systems were
originally designed for use in movie theaters, their effect
is best felt in a theater having many speakers designed for
acoustic effects. Since home conditions, such as room
size, wall material, number of speakers, and so on, can
differ so widely, it is inevitable that there are differences in
the sound heard. Based on a wealth of actually measured
data, Yamaha CINEMA DSP uses Yamaha original DSP
technology to combine Dolby Pro Logic, Dolby Digital
and DTS systems to provide the audiovisual experience of
movie theater in the listening room of your own home.

Component video signal
With the component video signal system, the video signal
is separated into the Y signal for the luminance and the PB
and PR signals for the chrominance. Color can be
reproduced more faithfully with this system because each
of these signals is independent. The component signal is
also called the “color difference signal” because the
luminance signal is subtracted from the color signal. A
monitor with component input jacks is required in order to
output component signals.

SILENT CINEMA
Yamaha has developed a natural, realistic sound effect
DSP algorithm for headphones. Parameters for
headphones have been set for each sound field program so
that accurate representations of all the sound field
programs can be enjoyed on headphones.

Composite video signal
With the composite video signal system, the video signal
is composed of three basic elements of a video picture:
color, brightness and synchronization data. A composite
video jack on a video component transmits these three
elements combined.

Virtual CINEMA DSP
Yamaha has developed a Virtual CINEMA DSP algorithm
that allows you to enjoy DSP surround effects even
without any surround speakers by using virtual surround
speakers. It is even possible to enjoy Virtual CINEMA
DSP using a minimal two-speaker system that does not
include a center speaker.

ADDITIONAL
INFORMATION
English

61 En

01EN_RX-V363_U.book Page 62 Thursday, January 31, 2008 3:52 PM

Specifications

Specifications
AUDIO SECTION

VIDEO SECTION

• Minimum RMS Output Power for Front, Center, Surround
[U.S.A. and Canada models]
1 kHz, 0.9% THD, 8 Ω ............................................... 100 W/ch
[Other models]
1 kHz, 0.9% THD, 6 Ω ............................................... 100 W/ch

• Signal Level
Composite ................................................................. 1 Vp-p/75 Ω
Component ................... 1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR)

• Maximum Power (JEITA)
[U.S.A. and Canada models]
1 kHz, 10% THD, 8 Ω ................................................ 135 W/ch
[Asia, China, Korea and General models]
1 kHz, 10% THD, 6 Ω .................................................135 W/ch

• Video Maximum Input Level.................................. 1.5 Vp-p or more
• Signal to Noise Ratio ................................................. 50 dB or more
• Frequency Response (MONITOR OUT)
Component Signal ................................... 5 Hz to 60 MHz, –3 dB

FM SECTION

• MAX Power Per Channel
[U.K., Russia, and Europe models]
1 kHz, 0.7% THD, 4 Ω ...................................... 105 W or more

• Tuning Range
[U.S.A. and Canada models] .......................... 87.5 to 107.9 MHz
[Asia and General models] ......... 87.5/87.50 to 108.0/108.00 MHz
[Other models] ............................................ 87.50 to 108.00 MHz

• IEC Power
[U.K., Russia, and Europe models]
1 kHz, 0.1% THD, 6 Ω ........................................ 90 W or more

• 50 dB Quieting Sensitivity (IHF, 100% mod.)
Mono ................................................................. 2.8 µV (20.2 dBf)

• Dynamic Power
[U.S.A. and Canada models] (Impedance Selector: 8 Ω)
(IHF, 8/6/4/2 Ω) ......................................... 110/130/160/180 W
[Other models]
(IHF, 6/4/2 Ω) .................................................... 105/130/150 W
• Dynamic Headroom [U.S.A. and Canada models]
8 Ω ..................................................................................... 0.41 dB
• Frequency Response
CD, etc. to Front ................................. 10 Hz to 100 kHz, 0/–3 dB
V-AUX to Front .................................... 10 Hz to 20 kHz, 0/–3 dB
• Total Harmonic Distortion
CD, etc. (2ch stereo) to Front SP OUT,
[U.S.A. and Canada models]
1 kHz, 50 W/8 Ω ................................................... 0.06% or less
[Other models]
1 kHz, 50 W/6 Ω ................................................... 0.06% or less
• Signal to Noise Ratio (IHF-A Network)
CD, etc. (STEREO) Input shorted
250 mV................................................................ 100 dB or more
200 mV.................................................................. 98 dB or more
• Residual Noise (IHF-A Network)
Front L/R ................................................................ 170 µV or less
• Channel Separation
CD, etc. Input 5.1 kΩ shorted (1 kHz/10 kHz)
................................................................... 60 dB/45 dB or more
• Tone Control
BASS Boost/Cut .................................................... ±10 dB/100 Hz
TREBLE Boost/Cut .............................................. ±10 dB/20 kHz
• Headphone Jack Rated Output/Impedance
CD, etc. (1 kHz, 200 mV, 8 Ω).................................... 0.4 V/470 Ω
• Input Sensitivity/Input Impedance
CD, etc. ................................................................. 200 mV/47 kΩ
MULTI CH INPUT ............................................... 200 mV/47 kΩ
• Maximum Input Signal
CD, etc. 1 kHz, 0.5%THD (EFFECT ON) ............. 2.0 V or more
• Output Level/Output Impedance
AUDIO OUT (REC) ............................................ 200 mV/1.2 kΩ
SUBWOOFER OUTPUT
(2ch Stereo and FRONT SP: SMALL) .................... 4 V/1.2 kΩ
• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround) ................................... 12 dB/oct.
L.P.F. (Subwoofer) ........................................................ 24 dB/oct.

62 En

• Signal to Noise Ratio (IHF)
Mono/Stereo ............................................................. 73 dB/70 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo ................................................................ 0.5%/0.5%

AM SECTION
• Tuning Range
[U.S.A. and Canada models] .............................. 530 to 1710 kHz
[Asia and General models] ................. 530/531 to 1710/1611 kHz
[Other models] .................................................... 531 to 1611 kHz

GENERAL
• Power Supply
[U.S.A. and Canada models] ............................. 120 V AC, 60 Hz
[Australia model] ............................................... 240 V AC, 50 Hz
[Korea model] .................................................... 220 V AC, 60 Hz
[China model] .................................................... 220 V AC, 50 Hz
[U.K., Russia, and Europe models] .....................230 V AC, 50 Hz
[Asia and General models]
............................................. 110-120/220–240 V AC, 50/60 Hz
• Power Consumption
[U.S.A. and Canada models] ................................. 240 W/320 VA
[Other models] .................................................................... 240 W
• Standby Power Consumption
[Except Asia and General models] ...................................... 0.8 W
• Maximum Power Consumption
[Asia and General models]
5ch, 10%/THD ................................................................. 530 W
• Dimensions (W x H x D).................................. 435 x 151 x 318 mm
(17-1/8” x 5-15/16” x 12-1/2”)
• Weight .............................................................. 8.0 kg (17 lbs 10 oz)

* Specifications are subject to change without notice.

01EN_RX-V363_U.book Page 63 Thursday, January 31, 2008 3:52 PM

INDEX

Index
■

Numerics

1 SOUND MENU .......................... 43, 45
2 INPUT MENU ............................ 43, 48
2ch Stereo ............................................ 34
3 OPTION MENU ......................... 44, 50
5ch Stereo ............................................ 34

■

A

A)DISPLAY SET ................................ 50
A)INPUT ASSIGN .............................. 48
A)SPEAKER SET ............................... 45
A.DELAY ............................................ 48
Adjusting speaker levels
during playback ............................... 32
Adjusting the tonal quality ................... 31
AM tuning ............................................ 37
ANTENNA terminals ............................ 9
Audio cable plugs ................................ 13
Audio delay .......................................... 48
AUDIO jacks ................................... 9, 13
Audio jacks .......................................... 13
AUDIO SELECT ................................. 31
Audio select ......................................... 50
Audio settings ...................................... 48
Automatic preset tuning ....................... 38
Automatic tuning ................................. 37

■

B

■

C

D

D)CENTER GEQ .................................47
D)DECODER MODE ..........................49
D)PARAM. INI ....................................50
Decoder indicator .................................20
Decoder mode ......................................49
Decoder select mode ............................49
DIGITAL AUDIO
COAXIAL jacks ..............................13
DIGITAL AUDIO
OPTICAL jacks ...............................13
DIGITAL INPUT
COAXIAL assignment .....................48
DIGITAL INPUT jacks ..........................9
DIGITAL INPUT
OPTICAL assignment ......................48
DIMENSION .......................................35
Dimension ............................................35
DIMMER .............................................50
Dimmer ................................................50
Disc Listening ......................................26

■

E

E)BLUETOOTH ................................. 50
E)LFE LEVEL ..................................... 47
E)MULTI CH SET .............................. 49
Editing sound fields parameters .......... 35
ENHANCER indicator ........................ 20
Enjoying 2-channel sources
using the standard decoders ............. 35
Exchanging preset stations .................. 39

■

F

F)D.RANGE ........................................ 47
FM tuning ............................................ 37
FRONT ................................................ 45
FRONT B ............................................ 45
FRONT B speaker setting ................... 45
Front panel display .............................. 20
Front speakers ...................................... 45

■

G

G)AUDIO SET .................................... 48
Game .................................................... 34
Game Playing ...................................... 26

■

H

Hall ...................................................... 34
HDMI .................................................. 14
HDMI jack, HDMI cable plug ............. 14
Headphone dynamic range .................. 47
Headphone LFE ................................... 47
Headphones indicator .......................... 20
HP D.R ................................................ 47
HP LFE ................................................ 47

■

I

Infrared window .................................. 21
INI.VOL. ............................................. 48
Initial volume ....................................... 48
Initializing ............................................ 54
Input assignment .................................. 48
Input channel and
speaker indicators ............................ 20
Input channel indicators ...................... 20
Input menu ........................................... 43
Input rename ........................................ 49

63 En

English

C)AUDIO SELECT ............................. 50
C)SP DISTANCE ................................ 47
C)VOLUME TRIM ............................. 49
Canceled,
Bluetooth status message ................. 58
CD Listening ........................................ 26
CD Music Listening ............................. 26
CENTER .............................................. 45
Center graphic equalizer ...................... 47
Center speaker ...................................... 45
Center width ......................................... 35
CINEMA DSP indicator ...................... 20
Completed,
Bluetooth status message ................. 58
COMPONENT VIDEO jacks .......... 9, 13
Connect error,
iPod controlling status message ....... 58
Connecting a
cable TV/satellite tuner .................... 15

■

Disconnected,
Bluetooth status message ................ 58
Disconnected,
iPod controlling status message ...... 58
Display settings ................................... 50
DOCK indicator,
Front panel display .......................... 20
DSP LEVEL ........................................ 35
DSP level ............................................. 35
DTS decoder prioritize setting ............. 49
DVD Live Viewing ............................. 26
DVD Movie Viewing .......................... 26
DVD Viewing ...................................... 26
DVR Viewing ...................................... 26
Dynamic range ..................................... 47

ADDITIONAL
INFORMATION

B)INPUT RENAME ............................ 49
B)MEMORY GUARD ........................ 50
B)SP LEVEL ....................................... 46
BASIC SETUP .............................. 22, 43
Basic setup ........................................... 43
BASS OUT .......................................... 46
BGV ..................................................... 49
Bluetooth setting .................................. 50
Bluetooth status message ..................... 58
BT connected,
Bluetooth status message ................. 58

Connecting a CD player .......................17
Connecting a CD player and a
CD recorder/MD recorder ................17
Connecting a DVD player ....................15
Connecting a DVD recorder .................15
Connecting a video monitor .................15
Connecting audio components .............17
Connecting speakers .............................11
Connecting the AM antennas ...............19
Connecting the FM antennas ................19
Connecting the power cable .................19
Connecting the
Yamaha Bluetooth adapter ...............18
Connecting the
Yamaha iPod universal dock ...........18
Connecting to the
CENTER terminals ..........................12
Connecting to the
COMPONENT VIDEO jacks ..........16
Connecting to the
FRONT A terminals .........................12
Connecting to the
FRONT B terminals .........................12
Connecting to the HDMI or
COMPONENT VIDEO jacks ..........16
Connecting to the
MULTI CH INPUT jacks ................17
Connecting to the
SURROUND terminals ....................12
Connecting to the
VIDEO AUX jacks ..........................18
Connecting video components .............15
Controlling a TV ..................................51
Controlling other components ..............52
Creating original SCENE templates .....27
CROSSOVER ......................................46
Crossover ..............................................46
CT WIDTH ..........................................35

01EN_RX-V363_U.book Page 64 Thursday, January 31, 2008 3:52 PM

Index

Input source indicators ......................... 20
Input source information ...................... 32
Installing batteries in the
remote control .................................... 3
iPod connected,
iPod controlling status message ....... 58
iPod control, Status message ............... 58

■

J

Jazz ....................................................... 34

■

L

LFE indicator ....................................... 20
LFE/Bass out ........................................ 46
Listening to unprocessed
input signals ..................................... 36
Low-frequency effect level .................. 47

■

M

Manual preset tuning ........................... 38
MANUAL SETUP ............................... 43
Manual setup ........................................ 43
Manual tuning ...................................... 37
MAX VOL. .......................................... 48
Maximum volume ................................ 48
MEM.GUARD ..................................... 50
Memory guard ...................................... 50
Movie Dramatic ................................... 34
Movie Spacious .................................... 34
MULTI CH INPUT jacks ...................... 9
Multi channel input setup .................... 49
Multi-channel sources and sound field
programs with headphones .............. 36
Multi-information display .................... 20
Music Disc Listening ........................... 26
Music Enh. 2ch .................................... 34
Music Enh. 5ch .................................... 34
MUTE indicator ................................... 20
MUTE TYP. ......................................... 48
Mute type ............................................. 48

■

N

NIGHT indicator .................................. 20
Night listening mode ............................ 31
No BT adapter,
Bluetooth status message ................. 58

■

O

Option menu ........................................ 44

■

P

Pairing, Bluetooth control .................... 41
PANORAMA ....................................... 35
Panorama ............................................. 35
Parameter initialization ........................ 50
PCM indicator ...................................... 20
Placing speakers ................................... 10
Playing video sources in the
background ...................................... 33
Pop/Rock .............................................. 34
PRESET ............................................... 54
Preset SCENE templates ...................... 26

■

R

Radio Listening .................................... 26

64 En

Rear panel ..............................................9
Remote control codes ........................... iii
Rename, SCENE template ...................27
Resetting the system .............................59

■

S

SCENE ...................................................7
Searching...,
Bluetooth status message .................58
Selecting audio input jacks ..................31
Selecting preset stations .......................39
Selecting the MULTI CH INPUT
component as the input source .........30
Selecting the night listening mode .......31
Selecting the SCENE templates ...........24
Set menu ...............................................43
Set this unit to the standby mode .........19
Setting input source of the customized SCENE
template on the remote control .............28
Setting remote control codes ................53
Setting the speaker impedance .............12
SIGNAL INFO .....................................44
Signal information ................................44
SILENT CINEMA ...............................36
SILENT CINEMA indicator ................20
SLEEP indicator ...................................20
Sleep timer ...........................................33
Sound field programs ...........................34
Sound menu ..........................................43
SP A B indicators .................................20
SP D.R ..................................................47
SP IMP. ................................................54
SP LFE .................................................47
Speaker distance ...................................47
Speaker distances .................................47
Speaker dynamic range ........................47
Speaker impedance ..............................54
Speaker level ........................................46
Speaker LFE .........................................47
Speaker settings ....................................45
SPEAKERS terminals ............................9
Specifications .......................................62
START PAIRING ................................50
Start pairing, .........................................50
Straight mode .......................................36
SUBWOOFER OUTPUT jack ...............9
Subwoofer phase ..................................46
Supplied accessories ..............................3
SUR. LR ...............................................45
Surround left/right speakers .................45
SWFR PHASE .....................................46

■

■

U

UNIT ................................................... 47
Unit ...................................................... 47
Unknown iPod,
iPod controlling status message ...... 58
Using the remote control ..................... 21
Using your headphones ....................... 30

■

V

Video cable plugs ................................ 13
VIDEO jacks ................................... 9, 13
Video jacks .......................................... 13
Virtual CINEMA DSP ......................... 36
VIRTUAL indicator ............................ 20
VOLTAGE SELECTOR ....................... 3
VOLUME level indicator .................... 20
Volume Trim ....................................... 49

■

Z

Zone B ................................................. 30

T

TEST ....................................................47
Test tone ...............................................47
Troubleshooting ...................................55
TU ........................................................54
Tuner frequency step ............................54
Tuner indicators ...................................20
Turning off the power ..........................19
Turning on the power ...........................19
TV Sports .............................................34
TV Sports Viewing ..............................26
TV Viewing ..........................................26

“ASTANDBY/ON” or “3DVD”
(example) indicates the name of the
parts on the front panel or the remote
control. Refer to the attached sheet
or the pages at the end of this manual
for the information about each
position of the parts.

01EN_RX-V363_U.book Page i Thursday, January 31, 2008 3:52 PM

■ Front panel

A

B

C

D

E

F

G

H

VOLUME

STANDBY
/ON
EDIT
PRESET/TUNING

BAND

A/B/C/D/E

PRESET/TUNING

MEMORY

TUNING AUTO/MAN'L

SCENE

1

2

3

STRAIGHT

NIGHT

PROGRAM
PHONES

SPEAKERS
A/B/OFF

TONE CONTROL

VIDEO AUX

INPUT

VIDEO

AUDIO SELECT

EFFECT

SILENT CINEMA

I

i

4

J

K

L

M

N

O

P

L

AUDIO

R

PORTABLE

01EN_RX-V363_U.book Page ii Thursday, January 31, 2008 3:52 PM

■ Remote control

1
2

3

POWER

POWER

TV

AV

A

STANDBY

POWER

B

C

MUTE

CD

MD/CD-R

TUNER

DVD

DTV/CBL

DVR

V-AUX/DOCK

D

E

AMP

TV INPUT

TV MUTE

1

2

D
E
F

TV CH

G
TV VOL

4
SCENE

5
6

BAND LEVEL
TITLE

7

3

MENU

4

VOLUME

I

ENTER

8

DISPLAY

RETURN

H

J

REC

9

0

l

PROG h

1

2

A

STRAIGHT

B

MULTI CH IN AUDIO SEL

5
9

ENHANCER SUR. DECODE

3

4

NIGHT

6
0

7

8
SLEEP

10

ENT

K
L
M
N
O
APPENDIX

C

ii

01EN_RX-V363_U.book Page iii Thursday, January 31, 2008 3:52 PM

List of remote control codes

Blu-ray player
Samsung

2137

CD player
Yamaha

5000, 5013

CD Recorder
Yamaha

5001

DVD
Acoustic Solutions
2078
Aiwa
2055, 2100
Akai
2096
Akura
2076
Alba
2078, 2086
Apex
2027, 2049
Awa
2078
Axion
2078
Brainwave
2096
Brandt
2073, 2085
Broksonic
2060
Bush
2075, 2078, 2112
Centrex
2077
Classic
2078
Clatronic
2075
Coby
2078
C-Tech
2074
CyberHome
2025, 2079, 2091
Daewoo
2092, 2098
Dansai
2096
Daytek
2080, 2089
DEC
2075
Denon
2030, 2102, 2103
Denver
2075, 2076
Diamond
2074
DK Digital
2094
Dual
2078
D-Vision
2096
DVX
2074
Elta
2096
Euroline
2096
Funai
2052, 2058
Global Solutions2074
Global Sphere 2074
Goodmans
2075, 2077, 2078
Grundig
2077, 2098
H&B
2075
Haaz
2074
HE
2078
Hitachi
2032, 2072
Home Electronics
2078
Innovation
2072
Irradio
2134
JDB
2078
JVC
2033, 2045, 2053,
2073, 2099
Kenwood
2030, 2097
Kingavon
2075
Koda
2075
Lawson
2074
Lenco
2075
LG
2084, 2087
Lifetec
2072
Limit
2074
LogicLab
2074
Luxor
2077
Magnavox
2037, 2073, 2075
Magnum
2072

iii

MBO
Medion
Micromaxx
Micromedia
Microstar
Mitsubishi
Mizuda
Mustek
Naiko
Onkyo
Orava
P&B
Pacific
Panasonic

2078
2072
2072
2073
2072
2035
2075
2078
2077
2073, 2135
2075
2075
2074
2030, 2040, 2054,
2057, 2105, 2110
Philips
2019, 2026, 2046,
2073, 2081, 2090
Pioneer
2036, 2082
Proline
2077
Provision
2075
RCA
2031, 2042, 2050,
2051
Red Star
2076
Reoc
2074
Roadstar
2075, 2078, 2086
Rowa
2077
Saba
2085
Sabaki
2074
Samsung
2032, 2041, 2104,
2113
Sansui
2074
Sanyo
2095
ScanMagic
2078
Scientific Labs 2074
Scott
2088
SEG
2074, 2086
Sharp
2034, 2043, 2059,
2093, 2106
Silva
2076
Singer
2074
Skymaster
2074, 2078
Skyworth
2076
SM Electronic 2074, 2078
Sony
2028, 2029, 2039,
2083, 2107
Soundmaster
2074
Soundmax
2074
Standard
2074
Star Cluster
2074
Starmedia
2075
Supervision
2074, 2078
Sylvania
2052, 2058
Synn
2074
TCM
2072
Teac
2074
Tec
2076
Technics
2030
Technika
2096
Technosonic
2096
Tevion
2072, 2074
Thomson
2085, 2109
Tokai
2076
Toshiba
2026, 2044, 2048,
2056, 2073, 2108,
2111
United
2078
Voxson
2078
Wharfedale
2074
Xlogic
2074
Yakumo
2077
Yamada
2077

Yamaha
Yukai
Zenith

2000, 2001, 2003,
2030, 2101
2078
2038, 2047, 2073

DVD Recorder
Apex
JVC
LG
Panasonic
Philips
Pioneer
RCA
Sony
Toshiba
Yamaha
Yukai

2024
2070
2071
2020, 2065, 2066,
2067
2019, 2061, 2062,
2063
2021
2018
2022, 2064
2068
2023
2069

DVD/LD
Pioneer

2036

DVD/VCR
JVC
LG
Panasonic
Philips
RCA
Samsung
Sharp
Sony
Toshiba
Zenith

1017, 2045
1071, 2087
1020, 1072, 2040,
2105
1025
1022, 2042
1021, 2041, 2104
1023, 1073, 2043,
2106
1019, 1074, 2039,
2107
1024, 1075, 2044,
2108
1026, 2047

DVD-DVR
Panasonic
Pioneer
Samsung
Toshiba

2132
2132
2132
2132
2015, 2016, 2017,
2120
Philips
2117, 2121, 2123,
2128
Pioneer
2012, 2013, 2014
Proscan
2129
RCA
2116, 2124, 2129,
2133
ReplayTV
2118, 2119, 2120
Sharp
2009, 2010
Sonic Blue
2119, 2120
Sony
2005, 2006, 2007,
2122, 2130, 2131,
2132
Stack 10
2132
Stack 9
2132
Systemax
2132
Tagar Systems 2132
Tivo
2116, 2121, 2122,
2123, 2130, 2131
Toshiba
2004, 2125, 2132
Touch
2132
UltimateTV
2133
Viewsonic
2132
Voodoo
2132
Yamaha
2011
ZT Group
2132

HD DVD
Toshiba

2132
2132
2132
2132
2123, 2128, 2129,
2133
DISH Network 2126, 2127
Dishpro
2126
Echostar
2126, 2127
Expressvu
2126
Gateway
2132
GOI
2126
Hewlett Packard 2132
Hitachi
2008
Howard Computers
2132
HTS
2126
Hughes
2123, 2128
Humax
2123
Hush
2132
iBUYPOWER 2132
JVC
2126, 2127
Linksys
2132
Media Center PC
2132

2136

iPod
Yamaha

5011

LD player
Yamaha

2067
2114
2115
2068

DVR
ABS
Alienware
CyberPower
Dell
DIRECTV

Microsoft
Mind
Niveus Media
Northgate
Panasonic

2002

MD
Yamaha

5002, 5003, 5004

TAPE DECK
Yamaha

5005, 5006

TUNER
Yamaha

5007, 5008, 5009,
5010, 5012, 5014,
5015, 5016, 5017,
5018

TV
Acer
Acme
Acura
ADA
ADC
Admiral
Adyson
Agashi
Agazi
AGB
Aiko
Aiwa

0093
0207
0208
0255
0206
0058, 0205, 0206,
0210, 0211
0200, 0207
0200
0206
0204
0127, 0200, 0207,
0208
0028, 0139, 0229,
0237

01EN_RX-V363_U.book Page iv Thursday, January 31, 2008 3:52 PM

Akai

Cascade
Cathay
CCE
Celebrity
Centurion
Century
CGE
Cimline
Citizen

0208
0213, 0217
0127
0059
0213, 0217
0205
0214, 0215
0208, 0218
0060, 0061, 0062,
0064
City
0208
Clarivox
0212, 0217
Clatronic
0206, 0207, 0208,
0209, 0213, 0214,
0218
CMS
0200
Colortyme
0060, 0061
Concerto
0060, 0061
Concorde
0208
Condor
0200, 0207, 0213
Contec
0200, 0207, 0208
Contec/Cony 0062
Continental Edison
0216
Cosmel
0208
Craig
0062
Crosley
0205, 0214, 0215
Crown
0062, 0063, 0128,
0208, 0213, 0217
CS Electronics 0200, 0207, 0209,
0214, 0218
CTC
0214
Curtis Mathes 0057, 0060, 0061,
0064, 0065
CXC
0062
Cybertron
0209, 0218
Daewoo
0060, 0061, 0120,
0127, 0155, 0193,
0200, 0207, 0208,
0213, 0218, 0238
Dainichi
0200, 0209, 0218
Dansai
0200, 0206, 0213,
0217
Dantax
0217
Daytron
0060, 0061, 0208
De Graaf
0210
Decca
0204, 0207, 0213,
0217
Desmet
0213, 0217
Diamond
0200
Dimensia
0057
Dixi
0208, 0213, 0217
DTS
0208
Dual
0207, 0215, 0216
Dual-Tec
0207, 0208, 0215
Dumont
0060, 0127, 0205,
0207
Durabrand
0126
Dux
0217
Dynatron
0213, 0217
Elbe
0203, 0204, 0212,
0218
Elbe-Sharp
0204
Elcit
0204, 0205
ELECTRO TECH
0208
Electroband
0059
Electrohome
0059, 0060, 0061
Elin
0200, 0207, 0213,
0217
Elite
0209, 0213, 0218
Elman
0215
Elta
0200, 0208
Emerson
0060, 0061, 0062,
0064, 0128, 0205

Envision
Erres
ESA
Etron
Euro-Feel
Euroline
Euroman
Euromann
Europhon

0060, 0061
0213, 0217
0080
0208
0206
0217
0200
0206, 0207, 0213
0200, 0204, 0207,
0213, 0215
Fenner
0208
Ferguson
0212, 0217, 0226
Fidelity
0200, 0207, 0210
Finlandia
0210
Finlux
0204, 0205, 0207,
0213, 0215, 0217
Firstline
0200, 0207, 0208,
0213, 0214
Fisher
0064, 0127, 0128,
0205, 0207, 0215
Flint
0213, 0218
Formenti
0200, 0205, 0207,
0215, 0217
Formenti-Phoenix
0200
Fortress
0205
Frontech
0206, 0208, 0210,
0211, 0214
Fujitsu
0023, 0024, 0025,
0088, 0127
Funai
0033, 0034, 0035,
0036, 0037, 0062,
0206
Futuretech
0062
Gateway
0094
GBC
0208, 0215, 0218
GE
0057, 0060, 0061,
0122, 0147
GEC
0204, 0207, 0211,
0213, 0217
Geloso
0208, 0210, 0215
General Technic 0208
Genexxa
0209, 0211, 0213,
0218
Gibralter
0060
GoldHand
0200
GoldStar
0060, 0061, 0127,
0128, 0200, 0201,
0207, 0208, 0210,
0213, 0214, 0215,
0217
Goodmans
0171, 0201, 0204,
0206, 0208, 0213,
0217, 0240
GPM
0209, 0218
Graetz
0211
Granada
0204, 0207, 0210,
0213, 0217
Grandin
0208, 0209, 0217
Grundig
0128, 0130, 0222,
0236, 0255
Grunpy
0062
Halifax
0200, 0206, 0207
Hallmark
0060, 0061
Hampton
0200, 0207
Hanseatic
0203, 0207, 0208,
0213, 0215, 0217
Hantarex
0204, 0208
Harvard
0062
HCM
0206, 0207, 0208,
0218
Hifivox
0216
Higashi
0200
Hinari
0208, 0209, 0213,
0217, 0218

Hisawa
Hitachi

0209, 0218
0006, 0014, 0015,
0016, 0042, 0060,
0061, 0095, 0105,
0127, 0156, 0179,
0180, 0204, 0207,
0210, 0211, 0215,
0216, 0251
Hornyphon
0213
Hoshai
0209, 0218
Huanyu
0200, 0207
Hygashi
0200, 0207
Hyper
0200, 0207, 0208,
0214, 0215
Hypson
0206, 0207, 0213,
0217
ICE
0127, 0200, 0206,
0207, 0208, 0209,
0213, 0218
ICeS
0200, 0218
IMA
0062
Imperial
0211, 0213, 0214,
0215
Indiana
0213, 0217
Infinity
0063
Ingelen
0211
Ingersol
0208
Inno Hit
0201, 0204, 0207,
0208, 0209, 0213,
0217, 0218
Innovation
0206, 0208
Interbuy
0208, 0214
Interfunk
0205, 0211, 0213,
0214, 0216, 0217
International
0200
Intervision
0206, 0207, 0218
Irradio
0201, 0208, 0209,
0213, 0217, 0218
Isukai
0209, 0218
ITC
0207, 0215
ITS
0200, 0209, 0213,
0218
ITT
0129, 0208, 0211
ITV
0208, 0217
JBL
0063
JC Penney
0057, 0060, 0061
JCB
0059
Jensen
0060, 0061
JVC
0017, 0018, 0019,
0108, 0136, 0153,
0178, 0190, 0213,
0218
Kaisui
0200, 0207, 0208,
0209, 0218
Kamosonic
0207
Kamp
0200, 0207
Kapsch
0211
Karcher
0207, 0208, 0212,
0217
Kawasho
0059, 0060, 0061,
0200
Kendo
0128, 0210
Kennedy
0215
Kenwood
0060, 0061
Kingsley
0200, 0207
Kloss Novabeam
0062
Kneissel
0203
Kolster
0213
Konka
0209, 0218
Korpel
0213, 0217
Korting
0205
Koyoda
0208
KTV
0062, 0127, 0207
Kyoto
0200, 0212

iv

APPENDIX

0059, 0065, 0127,
0129, 0130, 0200,
0204, 0208, 0209,
0213, 0217, 0218,
0255
Akiba
0209, 0218
Akura
0206, 0209, 0218
Alaron
0200
Alba
0200, 0207, 0208,
0209, 0217, 0218
ALBIRAL
0212
Allstar
0213
Amplivision
0207
Amstrad
0204, 0206, 0208,
0209, 0218
Amtron
0062
Anam
0208
Anam National 0062
Anglo
0208
Anitech
0206, 0208
Ansonic
0203, 0208
AOC
0060, 0061
Apex
0118, 0122, 0132
Arc en Ciel
0216
Arcam
0200
Arcam Delta
0207
Aristona
0213, 0217
ASA
0205, 0211
Asberg
0213
Astra
0208
Asuka
0200, 0206, 0207,
0209, 0218
Atlantic
0200, 0207, 0213,
0217
Atori
0208
Audiosonic
0207, 0208, 0209,
0213, 0216, 0217,
0218
AudioTon
0207
Audiovox
0062
Autovox
0205, 0206, 0207
Awa
0200
Baird
0216
Bang & Olufsen 0205
Basic Line
0208, 0209, 0213,
0218
Bastide
0207
Baur
0217
Beko
0228
Belcor
0060
Bell & Howell 0058, 0064
Benq
0081
Beon
0213, 0217
Bestar
0213
Binatone
0207
Black Star
0214
Blaupunkt
0255
Blue Sky
0209, 0218
Bondstec
0214
Boots
0207
Bradford
0062
Brandt
0216, 0226
Brionvega
0205, 0213, 0217
Britannia
0200, 0207
Brockwood
0060
Broksonic
0138
Bruns
0205
BSR
0215
BTC
0209, 0218
Bush
0177, 0208, 0209,
0210, 0213, 0215,
0216, 0217, 0218,
0230, 0237
Candle
0060, 0061
Capsonic
0206

01EN_RX-V363_U.book Page v Thursday, January 31, 2008 3:52 PM

Lenco
Lenoir
Lesa
Leyco
LG

0208
0207, 0208
0214
0206, 0213, 0217
0016, 0038, 0039,
0127, 0128, 0157,
0158, 0163, 0164,
0166, 0188, 0189,
0200, 0201, 0207,
0208, 0210, 0213,
0214, 0215, 0217
Liesenk
0217
Life
0206, 0208
Lifetec
0206, 0208, 0218
Loewe
0063, 0128, 0203,
0204, 0223, 0227
Loewe Opta
0205, 0213, 0217
Logik
0058
Luma
0210, 0217
Lumatron
0210, 0213, 0217
Lux May
0213
Luxman
0060, 0061
Luxor
0201, 0207, 0210
LXI
0057, 0061, 0063,
0064
Magnadyne
0204, 0205, 0214,
0215, 0217
Magnafon
0200, 0204, 0207
Magnavox
0060, 0061, 0063,
0102, 0103, 0150
Magnum
0206, 0208
Majestic
0058
Mandor
0206
Manesth
0206, 0207, 0213,
0217
Marantz
0060, 0061, 0063,
0090, 0213, 0217
Marelli
0205
Mark
0200, 0213, 0217
Matsui
0204, 0207, 0208,
0210, 0213, 0217
Mediator
0213, 0217
Medion
0206, 0208
Megatron
0061
Melectronic
0200, 0207, 0208,
0211, 0213, 0216,
0217
Memorex
0058, 0061, 0064,
0208
Memphis
0208
Metz
0205
MGA
0060, 0061
Micromaxx
0206, 0208
Microstar
0206, 0208
Minerva
0204
Minoka
0213
Mitsubishi
0006, 0015, 0016,
0048, 0060, 0061,
0104, 0112, 0113,
0125, 0205, 0213
Mivar
0200, 0201, 0202,
0203, 0204, 0207
Montgomery Ward
0058
MTC
0060, 0061, 0128,
0200
Multi System 0217
Multitech
0062, 0127, 0128,
0200, 0207, 0208,
0210, 0214, 0215,
0217
Murphy
0200, 0207
NAD
0061
Naonis
0210

v

NEC

0026, 0053, 0060,
0061, 0096, 0127
Neckermann
0205, 0207, 0210,
0213, 0217, 0255
NEI
0213, 0217
Nesco
0214
NET-TV
0082, 0101
New Tech
0208, 0213
New World
0209, 0218
Nicamagic
0200, 0207
Nikkai
0200, 0206, 0207,
0209, 0213, 0217,
0218
Nikko
0061
Nobliko
0200, 0207
Nogamatic
0216
Nokia
0129, 0211
Nordmende
0205, 0211, 0213,
0216
Nordvision
0217
Oceanic
0211
Olevia
0084
ONCEAS
0207
Onwa
0062, 0218
Orbit
0213
Orion
0126, 0204, 0208,
0213, 0217, 0235
Orline
0218
Orsowe
0204
Osaki
0127, 0206, 0207,
0209, 0218
Osio
0201
Oso
0209, 0218
Osume
0218
Otto Versand 0204, 0207, 0213,
0215, 0216, 0217,
0255
Pael
0200, 0207
Palladium
0207
Panama
0200, 0206, 0207,
0208
Panasonic
0006, 0007, 0063,
0073, 0074, 0097,
0110, 0114, 0137,
0141, 0151, 0162,
0165, 0186, 0204,
0211, 0244, 0245,
0246, 0254
Pathe Cinema 0200, 0203, 0207,
0212, 0215
Pathe Marconi 0212, 0216
Pausa
0208
Perdio
0200
Philco
0060, 0061, 0063,
0128, 0205, 0214,
0215
Philharmonic 0207
Philips
0040, 0060, 0063,
0072, 0115, 0116,
0124, 0130, 0150,
0175, 0184, 0187,
0205, 0207, 0213,
0215, 0217, 0220,
0221, 0232, 0233,
0252, 0253
Philips Magnavox
0124
Phoenix
0200, 0205, 0213,
0217
Phonola
0200, 0205, 0213,
0217
Pilot
0060
Pioneer
0012, 0013, 0060,
0061, 0098, 0109,
0117, 0128, 0181,

0182, 0194, 0195,
0211, 0213, 0216,
0217, 0250
Plantron
0206, 0213
Polaroid
0075
Poppy
0208
Portland
0060, 0061
Prandoni-Prince 0204, 0210
Precision
0207
Prima
0208, 0211
Profex
0208
Profi-Tronic
0213
Proline
0213
Proscan
0057
Prosonic
0200, 0207, 0217
Protech
0206, 0207, 0208,
0213, 0214, 0215,
0217
Proton
0060, 0061
Provision
0217
Pulsar
0060
Pye
0213, 0217
Pymi
0208
Quasar
0152, 0214
Quelle
0201, 0206, 0207,
0213, 0214, 0215,
0217
Radialva
0218
Radio Shack
0064
Radio Shack/Realistic
0057, 0060, 0061,
0062, 0064
Radiola
0213, 0217
Radiomarelli
0204, 0205, 0214
Radiotone
0213
RCA
0057, 0060, 0061,
0091, 0133, 0135,
0147, 0149
Realistic
0064
Revox
0213, 0217
Rex
0206, 0210, 0211
RFT
0203, 0205
Rhapsody
0200
R-Line
0213, 0217
Roadstar
0206, 0208, 0209,
0218, 0237
Robotron
0205
Rowa
0200
RTF
0205
Saba
0204, 0205, 0211,
0216
saccs
0212
Saisho
0204, 0206, 0207,
0208
Salora
0201, 0204, 0210,
0211, 0215
Sambers
0204
Sampo
0060, 0061, 0083,
0101
Samsung
0029, 0030, 0031,
0032, 0044, 0045,
0046, 0047, 0060,
0061, 0065, 0068,
0069, 0071, 0079,
0087, 0127, 0128,
0130, 0144, 0160,
0161, 0170, 0176,
0183, 0185, 0200,
0201, 0206, 0207,
0208, 0213, 0217,
0239, 0241, 0242,
0243
Sandra
0200, 0207
Sansui
0123, 0126, 0213

Sanyo

0020, 0021, 0022,
0049, 0060, 0064,
0127, 0128, 0200,
0203, 0207, 0215
SBR
0217
SCHAUB LORENTZ
0211
Schneider
0207, 0209, 0213,
0215, 0216, 0217,
0218
Scotch
0061
Scott
0060, 0061, 0062
Sears
0057, 0060, 0061,
0064
SEG
0200, 0206, 0207,
0214, 0215, 0217
SEI
0204
SEI-Sinudyne 0204, 0205, 0211
Seleco
0210, 0211, 0215
Sencora
0208
Sentra
0218
Serino
0200
Sharp
0009, 0010, 0011,
0060, 0061, 0066,
0070, 0087, 0111,
0143, 0145, 0167,
0168, 0169, 0198,
0204, 0224, 0247,
0248, 0249
Shogun
0060
Siarem
0204, 0205, 0215
Sicatel
0212
Siemens
0255
Sierra
0213
Signature
0058
Silva
0200
Singer
0205, 0214, 0215
Sinudyne
0204, 0205, 0215,
0217
Skantic
0211
Solavox
0211
Sonoko
0206, 0207, 0208,
0213, 0217
Sonolor
0211
Sontec
0213, 0217
Sony
0041, 0059, 0067,
0085, 0086, 0174,
0196, 0199, 0208,
0219, 0234
Sound & Vision 0209, 0218
Soundesign
0060, 0061, 0062
Soundwave
0213, 0217
SSS
0060, 0062
Standard
0207, 0208, 0209,
0213, 0218
Starlight
0217
Starlite
0062
Stenway
0218
Stern
0210, 0211
Sunkai
0208, 0218
Sunwood
0208, 0213
Superla
0200, 0204, 0207
SuperTech
0200
Supra
0208
Supreme
0059
Susumu
0209
Sutron
0208
Sydney
0200, 0207
Sylvania
0060, 0061, 0063,
0080, 0134, 0142,
0148
Symphonic
0062, 0080
Sysline
0217
Sytong
0200

01EN_RX-V363_U.book Page vi Thursday, January 31, 2008 3:52 PM

Tandy

Weltblick
0213, 0217
Weston
0215
White Westinghouse
0200, 0207, 0217
Yamaha
0000, 0001, 0002,
0003, 0004, 0005,
0060, 0061
Yamishi
0218
Yoko
0200, 0206, 0207,
0208, 0209, 0213,
0217, 0218
Yorx
0209, 0218
Zanussi
0210
Zenith
0058, 0060, 0100,
0105, 0119, 0121,
0154

TV/DVD
Aiwa
Apex
Broksonic
Bush
JVC
Panasonic
RCA
Sylvania
Thomson
Toshiba

0139, 2055
0132, 2049
0138, 2060
0230, 2112
0136, 2053
0137, 0254, 2054,
2110
0133, 0135, 2050,
2051
0134, 2052
0226, 2109
0131, 0231, 2048,
2111

TV/DVD/VCR
Panasonic
Samsung
Sharp
Sylvania
Toshiba

0141, 1040, 2057
0241, 1070, 2113
0143, 1028, 2059
0142, 1041, 2058
0140, 1029, 2056

TV/VCR
Aiwa
Bush
Daewoo
GE
Goodmans
Grundig
Hitachi
JVC
Magnavox
Orion
Panasonic
Philips
Quasar
RCA
Roadstar
Samsung
Sharp
Sony
Sylvania
Tatung
Toshiba
Zenith

0237, 1066
0237, 1066
0155, 0238, 1038,
1067
0147, 1030
0240, 1069
0236, 1062
0156, 1039
0153, 1036
0150, 1033
0235, 1065
0151, 1034
0150, 0232, 0233,
1033, 1062, 1063
0152, 1035
0149, 1032
0237, 1066
0144, 0239, 1027,
1068
0145, 1028
0234, 1064
0148, 1031
0237, 1066
0146, 0237, 1029,
1066
0154, 1037

VCR
Admiral
Adventura
Aiwa
Akai
Akiba
Akura

1008, 1013
1005
1005, 1042, 1043,
1044, 1066
1007, 1043
1050
1043, 1050

Alba
American High
Amstrad
Anitech
ASA
Asha
Asuka

1044, 1050
1004
1042
1050
1045, 1046
1002, 1014
1042, 1045, 1046,
1050
Audio Dynamics1000
Audiovox
1003
Baird
1042, 1043, 1047
Basic Line
1044, 1050
Baur
1046
Beaumark
1002, 1014
Bell & Howell 1001
Blaupunkt
1046, 1048
Broksonic
1012, 1013
Bush
1044, 1050, 1066
Calix
1003
Candle
1002, 1003
Canon
1004
CCE
1006
CGE
1042, 1043
Cimline
1044, 1050
Citizen
1002, 1003
Colortyme
1000
Colt
1006
Craig
1002, 1003, 1006,
1014
Crown
1050
Curtis Mathes 1000, 1002, 1004,
1009
Cybernex
1002, 1014
Daewoo
1005, 1038, 1061,
1067
Dansai
1050
Dantax
1044
DBX
1000
De Graaf
1046, 1049
Decca
1042, 1043, 1046
Denon
1010
Dimensia
1009
Dual
1043, 1046
Dumont
1042, 1046, 1047,
1049
Dynatech
1005
Electrohome
1003
Electrophonic 1003
Elta
1050
Emerson
1003, 1004, 1005,
1012, 1013
Etzuko
1050
Ferguson
1043
Fidelity
1042
Finlandia
1046, 1047, 1049
Finlux
1042, 1043, 1046,
1047, 1049
FIRST LINE 1044, 1045, 1049,
1050
Fisher
1001, 1047
Flint
1044
Formenti/Phoenix
1046
Fuji
1004
Fujitsu
1042
Funai
1005, 1042
Galaxy
1042
Garrard
1005
GBC
1050
GE
1002, 1004, 1009,
1014, 1030
GEC
1046
Geloso
1050
General Technic 1044, 1048
Go Video
1014

GoldHand
Goldstar

1050
1000, 1003, 1042,
1045
Goodmans
1042, 1045, 1050,
1069
Gradiente
1005
Graetz
1043, 1047
Granada
1046, 1047, 1049
Grandin
1042, 1045, 1050
Grundig
1046, 1050, 1062
Hanseatic
1045, 1046
Harley Davidson1005
Harman/Kardon 1000
Harwood
1006
HCM
1050
Headquarter
1001
Hinari
1044, 1050
Hisawa
1044
Hitachi
1007, 1010, 1039,
1042, 1043, 1046,
1049
Hughes Network Systems
1010
Hypson
1044, 1050
Imperial
1042
Inno Hit
1046, 1050
Innovation
1044, 1048
Instant Replay 1004
Interbuy
1045
Interfunk
1046, 1047
Intervision
1042
Irradio
1045, 1050
ITT
1043, 1047
ITV
1045
JC Penney
1000, 1001, 1002,
1003, 1004, 1006
JCL
1004
Jensen
1007
JVC
1000, 1001, 1007,
1011, 1017, 1036,
1043
Kaisui
1050
Karcher
1046
Kendo
1044
Kenwood
1000, 1001, 1007,
1011, 1043
KLH
1006
Kodak
1003, 1004
Korpel
1050
Leyco
1050
LG
1003, 1042, 1045,
1071
Lifetec
1044, 1048
Lloyd's
1005
Loewe
1048
Loewe Opta
1045, 1046
Logik
1006, 1050
Luxor
1047
LXI
1003
M Electronic 1042
Magnasonic
1047
Magnavox
1004, 1018, 1033
Magnin
1003, 1014
Manesth
1050
Marantz
1000, 1001, 1004,
1046, 1051
Marta
1003
Matsui
1044, 1045
Matsushita
1004
Mediator
1046
Medion
1044, 1048
MEI
1004

vi

APPENDIX

0127, 0207, 0209,
0211, 0218
Tashiko
0200, 0207, 0210
Tatung
0127, 0204, 0207,
0213, 0217, 0237
TCM
0206, 0208
Teac
0127
Tec
0207, 0208, 0214,
0215
Techwood
0060, 0061
Teknika
0058, 0060, 0061,
0062
Teleavia
0216
Telecor
0218
Telefunken
0065, 0213, 0216
Telegazi
0218
Teletech
0208, 0214, 0217
Teleton
0207
Televideon
0200
Tensai
0208, 0209, 0213,
0218
Tesmet
0213
Tevion
0206, 0208
Texet
0200, 0207
Thomson
0191, 0192, 0207,
0213, 0216, 0226
Thorn
0212, 0217
TMK
0060, 0061
Tokai
0213
Tokyo
0200, 0207
Toshiba
0027, 0043, 0053,
0054, 0064, 0078,
0089, 0090, 0106,
0107, 0127, 0131,
0140, 0146, 0159,
0197, 0225, 0231,
0237
Towada
0211, 0215
Transtec
0200
Trident
0204
Tristar
0218
Triumph
0204
Uher
0211, 0213
Ultravox
0200, 0205, 0207,
0214, 0215
United
0217
Universum
0127, 0128, 0129,
0201, 0206, 0213,
0214, 0215, 0217
Univox
0212
Vestel
0210, 0211, 0213,
0214, 0215, 0217
Vexa
0208, 0217
Victor
0213
VIDEOLOGIC 0200
Videologique 0200, 0207, 0209,
0218
Videosat
0214
VideoSystem 0213
Videotechnic 0200
Vidtech
0060, 0061
Viewsonic
0076, 0077, 0092,
0099, 0172, 0173
Visiola
0200, 0207
Vision
0213
Vortec
0213, 0217
Voxson
0205, 0210, 0211,
0213
Waltham
0207, 0212
Wards
0057, 0058, 0060,
0061, 0063
Watson
0213, 0217, 0218
Watt Radio
0200, 0207, 0212,
0215
Wega
0205

01EN_RX-V363_U_cv-4.fm Page vii Sunday, December 2, 2007 9:15 PM

Memorex

1001, 1002, 1003,
1004, 1005, 1008,
1013, 1014, 1042,
1045, 1047
Memphis
1050
Metz
1048
MGA
1014
MGN Technology
1002, 1014
Micromaxx
1044, 1048
Microstar
1044, 1048
Migros
1042
Minolta
1010
Mitsubishi
1011, 1042, 1046
Montgomery Ward
1008
Motorola
1004, 1008
MTC
1002, 1014
Multitech
1002, 1005, 1006,
1042, 1046, 1050
Murphy
1042
National
1048
NEC
1000, 1001, 1007,
1011, 1043, 1051
Neckermann
1043, 1046
NEI
1046
Nesco
1050
Nikko
1003
Noblex
1002, 1014
Nokia
1043, 1047
Nordmende
1043
Oceanic
1042, 1043
Okano
1044
Olympus
1004
Optimus
1003, 1008
Orion
1012, 1013, 1044,
1065
Orson
1042
Osaki
1042, 1045, 1050
Otto Versand 1046
Palladium
1043, 1045, 1050
Panasonic
1004, 1020, 1034,
1040, 1048, 1054,
1072

Pathe Marconi
Penney
Pentax
Perdio
Philco
Philips

1043
1010, 1014
1010, 1049
1042
1004, 1051
1004, 1025, 1033,
1046, 1056, 1057,
1059, 1062, 1063
Philips Magnavox
1018
Phonola
1046
Pilot
1003
Pioneer
1011, 1046
Prinz
1042
Profex
1050
Profitronic
1014
Proline
1042
Proscan
1009
Prosonic
1044
Protec
1006
Pye
1046, 1056
Quarter
1001
Quartz
1001, 1047
Quasar
1004, 1035
Quelle
1042, 1046, 1047
Radio Shack
1003
Radio Shack/Realistic
1001, 1002, 1003,
1004, 1005, 1008
Radiola
1046
Radix
1003
Randex
1003
RCA
1002, 1004, 1009,
1010, 1014, 1015,
1022, 1032
Realistic
1001, 1002, 1003,
1004, 1005, 1008
Rex
1043
RFT
1046
Roadstar
1045, 1050, 1066
Saba
1043
Saisho
1044, 1050
Salora
1047

Samsung

1002, 1014, 1021,
1027, 1052, 1068,
1070
Sanky
1008
Sansui
1007, 1011, 1013,
1043
Sanyo
1001, 1002, 1014,
1047
SBR
1046
Schaub Lorenz 1042, 1043, 1047
Schneider
1042, 1044, 1045,
1046, 1050
Scott
1012
Sears
1001, 1003, 1004,
1010
SEG
1050
SEI-Sinudyne 1046
Seleco
1043
Sentron
1050
Sharp
1008, 1023, 1028,
1053, 1073
Shintom
1006, 1047, 1050
Shivaki
1045
Shogun
1002, 1014
Siemens
1045, 1047
Signature 2000 1008
Silva
1045
Singer
1004, 1006
Sinudyne
1046
Sontec
1045
Sony
1016, 1019, 1055,
1060, 1064, 1074
STS
1004, 1010
Sunkai
1044
Sunstar
1042
Suntronic
1042
Sunwood
1050
Sylvania
1004, 1005, 1031,
1041
Symphonic
1005
Taisho
1044
Tandy
1001
Tashiko
1003, 1042

© 2008
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Black process 45.0° 240.0 LPI

Tatung

1007, 1042, 1043,
1046, 1066
TCM
1044, 1048
Teac
1005, 1007
Technics
1004, 1048
Teknika
1003, 1004, 1005
Teleavia
1043
Telefunken
1043
Tenosal
1050
Tensai
1042, 1045, 1050
Tevion
1044, 1048
Thomson
1043, 1058
Thorn
1043, 1047
TMK
1002, 1014
Tokai
1045, 1050
Tonsai
1050
Toshiba
1013, 1024, 1029,
1043, 1046, 1066,
1075
Totevision
1002, 1003, 1014
Towada
1050
Towika
1050
Uher
1045
Unitech
1002, 1014
Universum
1042, 1045, 1046
Vector Research 1000
Video Concepts 1000
Videon
1044, 1048
Videosonic
1002, 1014
Wards
1002, 1003, 1004,
1005, 1006, 1008,
1010, 1014
Weltblick
1045
White Westinghouse
1013
XR-1000
1004, 1005, 1006
Yamaha
1000, 1001, 1007
Yamishi
1050
Yokan
1050
Yoko
1045, 1050
Zenith
1013, 1026, 1037

All rights reserved.

Printed in China

WN25860

00_Sheet_RX-V363_U.book Page 1 Sunday, December 2, 2007 8:51 PM

UC

RX-V363
The circled numbers and alphabets correspond to those in the Owner’s Manual.
Les nombres et lettres dans un cercle correspondent à ceux du mode d’emploi.

■ Front panel/Face avant

A

B

C

D

E

F

G

H

VOLUME

STANDBY
/ON
EDIT
PRESET/TUNING

BAND

A/B/C/D/E

PRESET/TUNING

MEMORY

TUNING AUTO/MAN'L

SCENE

1

2

3

STRAIGHT

NIGHT

PROGRAM
PHONES

SPEAKERS
A/B/OFF

TONE CONTROL

VIDEO AUX

INPUT

VIDEO

AUDIO SELECT

EFFECT

SILENT CINEMA

I

Black process 45.0° 240.0 LPI

4

J

K

L

M

N

O

P

L

AUDIO

R

PORTABLE

00_Sheet_RX-V363_U.book Page i Sunday, December 2, 2007 8:51 PM

■ Remote control/Boîtier de télécommande

1
2

3

POWER

POWER

TV

AV

A

STANDBY

POWER

B

C

MUTE

CD

MD/CD-R

TUNER

DVD

DTV/CBL

DVR

V-AUX/DOCK

D

E

AMP

TV INPUT

TV MUTE

1

2

D
E
F

TV CH

G
TV VOL

4
SCENE

5
6

BAND LEVEL
TITLE

7
8

3

MENU

4

VOLUME

I

ENTER

RETURN

H

DISPLAY

J

REC

9

0

l

PROG h

1

2

A

STRAIGHT

B

MULTI CH IN AUDIO SEL

5
9

ENHANCER SUR. DECODE

3

4

NIGHT

6
0

7
10

8
SLEEP
ENT

K
L
M
N
O

C

Printed in China

Black process 45.0° 240.0 LPI

WN26250



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-702
Instance ID                     : uuid:a3d73423-5bf0-4cd5-8e3d-3939cd1b7368
Document ID                     : uuid:BD659C57-E6E6-1335-F6F8-78BB2E4B556A
History Action                  : linearized, encrypted
History Software Agent          : PDFlib PLOP 5.0 (.NET/Win64), PDFlib PLOP 5.0 (.NET/Win64)
History When                    : 2016:11:26 02:42:34+09:00, 2016:11:26 02:42:34+09:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Create Date                     : 2008:01:31 15:50:57Z
Modify Date                     : 2016:11:26 02:42:34+09:00
Metadata Date                   : 2016:11:26 02:42:34+09:00
Creator Tool                    : FrameMaker 6.0
Format                          : application/pdf
Creator                         : WiseStep
Title                           : 01EN_RX-V363_U.book
Has XFA                         : No
Page Count                      : 77
Page Layout                     : TwoPageRight
Author                          : WiseStep
EXIF Metadata provided by EXIF.tools

Navigation menu