Yamaha RX V367 Owner's Manual

User Manual: Yamaha RX-V367 Owner's Manual

Open the PDF directly: View PDF PDF.
Page Count: 80

Owner’s Manual
AV Receiver English for North America
En 2
CONTENTS
INTRODUCTION
Features and capabilities ...................................................3
About this manual............................................................. 4
Supplied accessories......................................................... 4
Part names and functions.................................................. 5
Front panel........................................................................5
Rear panel.........................................................................6
Front panel display ........................................................... 7
Remote control .................................................................8
CONNECTIONS
Connecting speakers ..........................................................9
Speaker channels and functions........................................ 9
Speaker layout ................................................................ 10
Connecting speakers.......................................................10
Connecting external devices............................................ 13
Cable plugs and jacks .....................................................13
Connecting a TV monitor...............................................14
Connecting BD/DVD players and other devices ............16
Connecting video cameras and portable audio players .. 20
Transmitting input A/V to external devices.................... 20
Connecting the FM/AM antennas ..................................21
Setting up speaker parameters ....................................... 22
STEP 1: Display the setting menu..................................22
STEP 2: Set the speaker status and size ......................... 22
STEP 3: Set the distance from the listening point..........23
STEP 4: Playback a test tone..........................................24
STEP 5: Adjust the volume ............................................ 24
PLAYBACK
Basic playback procedure ...............................................25
Adjusting high/low-frequency sound (Tone control) .....25
Changing input settings with a single key
(SCENE function) ............................................................26
Registering input sources/sound field program .............. 26
Enjoying sound field programs ...................................... 26
Selecting sound field programs and sound decoders ..... 26
Sound field programs ..................................................... 28
FM/AM tuning ................................................................. 30
Selecting a frequency for reception (Normal tuning)..... 30
Registering and recalling a frequency (Preset tuning) ... 31
Clearing preset stations .................................................. 32
Playing back tunes from your iPod™/iPhone™ ........... 33
Connecting the Yamaha iPod universal dock................. 33
Controlling an iPod/iPhone ............................................ 33
Playing back tunes from Bluetooth™ components....... 35
Connecting a Yamaha Bluetooth wireless
audio receiver ................................................................. 35
Pairing Bluetooth™ components ................................... 35
Using Bluetooth™ components ..................................... 36
SETUP
Configuring the settings specific for each input source
(Option menu) .................................................................. 37
Option menu display and setup ...................................... 37
Option menu items ......................................................... 37
Setting various functions (Setup menu)......................... 40
Setup menu display and settings .................................... 40
Setup menu items ........................................................... 40
Manages settings for speakers........................................ 41
Setting the audio output function of this unit................. 44
Making the receiver easier to use ................................... 46
Setting sound field program parameters......................... 47
Prohibiting setting changes ............................................ 47
Setting sound field program parameters ....................... 48
Setting sound field parameters ....................................... 48
Controlling other components with the
remote control .................................................................. 50
Keys connecting external components ........................... 50
Default remote control code settings.............................. 50
Registering remote control codes for external
component operations .................................................... 51
Resetting all remote control codes ................................. 52
Extended functionality that can be configured
as needed (Advanced Setup menu) ................................ 53
Displaying/Setting the Advanced Setup menu............... 53
Setting the impedance of speakers ................................. 53
Avoiding crossing remote control signals when using
multiple Yamaha receivers ............................................. 54
Initializing various settings for this unit ........................ 54
APPENDIX
Troubleshooting ............................................................... 55
General........................................................................... 55
HDMI™ ......................................................................... 57
Tuner (FM/AM) ............................................................. 58
Remote control............................................................... 59
iPod™/iPhone™ ............................................................ 59
Bluetooth™.................................................................... 60
Glossary............................................................................ 61
Audio information.......................................................... 61
Sound field program information................................... 61
Video information .......................................................... 62
Information on HDMI™................................................. 63
About trademarks ........................................................... 63
Specifications.................................................................... 64
Index ................................................................................. 65
En 3
INTRODUCTION
Built-in high-quality, high-power 5-channel amplifier
1-button input/sound field program switching (SCENE function) .......................26
Speaker connections for 2- to 5.1-channel configurations
Speaker channels and functions .................................................................................................................9
Speaker layout..........................................................................................................................................10
Speaker cable connection.........................................................................................................................10
Speaker impedance configuration............................................................................................................10
Subwoofer cable connection ....................................................................................................................12
Acoustic parameter adjustment to match your speakers and listening
environment
Setting for speaker acoustic parameters...................................................................................................22
Specifying the settings for each speaker ..................................................................................................41
Volume control for each speaker..............................................................................................................42
Speaker distance settings .........................................................................................................................42
Sound quality control with the equalizer <Graphic Equalizer> ..............................................................43
Test tone speaker adjustment ...................................................................................................................43
Bass and treble level adjustment <Tone Control> ...................................................................................25
External device connection and playback
Cables and input/output jacks for this unit ..............................................................................................13
TV connection..........................................................................................................................................14
TV audio playback through this receiver.................................................................................................15
Connections for BD/DVD players (recorders) and other devices............................................................16
Audio signal output to the TV connected via the HDMI jack .................................................................45
Correction of lag between audio and video signals <Lipsync>...............................................................44
External audio and video recorder connections .......................................................................................20
HDMI/AV video input combining other audio input...............................................................................38
Front panel external device connections (for video cameras, portable music players, etc.)....................20
Protective cover for front panel jacks ........................................................................................................4
Changing the input source names <Input Rename> ................................................................................46
Configuring the settings specific for each input source <Option menu> ................................................37
Playback from external devices ...............................................................................................................25
Playback from an iPod/iPhone (iPod/iPhone and components sold separately) .....................................33
Playback from a Bluetooth component (Bluetooth and components sold separately) ............................35
FM/AM Tuner
FM/AM broadcast listening .....................................................................................................................30
Simple preset tuning ................................................................................................................................31
Multi-channel, multi-format playback
Sound field effect selection......................................................................................................................26
Playback without sound field effects .......................................................................................................27
Stereo playback........................................................................................................................................27
Sound field effect configuration ..............................................................................................................48
Compressed-music playback ...................................................................................................................26
Front panel information display
Front panel display information switching ................................................................................................7
Front panel display brightness adjustment <Dimmer>............................................................................47
Digital video/audio signal information display <Signal Info> ................................................................38
Volume/sound quality adjustment functions
Easy listening at low volumes <Adaptive DRC> ....................................................................................44
Maximum volume settings.......................................................................................................................45
Startup volume settings............................................................................................................................45
Adjusting volume between input sources <Volume Trim> .....................................................................37
Remote control operation
Remote control names and functions.........................................................................................................8
Insert batteries into the remote control ......................................................................................................4
External device operation with this unit’s remote control .......................................................................50
Multiple Yamaha receiver operation without signal interference <Remote ID Switching>....................54
Other features
Standby mode after prolonged non-operation <Auto Power Down function>........................................47
Standby mode after a specific amount of time <Sleep timer>...................................................................8
To charge the iPod/iPhone when this unit is in standby mode <iPod Standby Charge> .........................34
Initializing various settings for this unit ..................................................................................................54
Prohibiting setting changes <Memory Guard>........................................................................................47
Features and capabilities
En 4
INTRODUCTION
Features and capabilities
About this manual
Supplied accessories
Check that you received all of the following parts.
Remote control
Batteries (AAA, R03, UM-4) x 2
AM loop antenna
Indoor FM antenna
VIDEO AUX input cover
This manual is printed prior to production. Design and
specifications are subject to change in part as a result of
improvements, etc. In case of differences between the manual and
product, the product has priority.
dHDMI1” (example) indicates the name of the parts on the
remote control. Refer to the “Part names and functions” (p. 5)
for the information about each position of the parts.
J1 indicates that the reference is in the footnote. Refer to the
corresponding numbers on the bottom of the page.
indicates the page describing the related information.
Click on the “ ” at the bottom of the page to display the
corresponding page in “Part names and functions.
Front panel
Rear panel
Front panel display
Remote control
Attaching the VIDEO AUX input cover (included)
To protect against dust, attach the supplied VIDEO AUX input
cover to the VIDEO AUX jacks when you do not use the jacks.
To remove the cover, push the left section of it.
Attach the cover
PUSH
Remove the cover
Installing batteries in the remote control
When inserting batteries in the remote control, remove the
battery compartment cover from the reverse side of the remote
control, and insert two AAA batteries into the battery
compartment so that they match with the polarity markings (+
and -).
Replace the batteries with new ones if the following symptoms
become evident:
The remote control can only be operated within a narrow range.
bTRANSMIT does not light up, or only lights dimly.
NOTE
If there are remote control codes for external components
registered to the remote control, removing the batteries for more
than two minutes, or leaving exhausted batteries in the remote
control, the remote control codes may be cleared. If this should
occur, replace the batteries with new ones, and set the remote
control codes.
ac
b
Battery compartment
cover
Battery compartment
En 5
INTRODUCTION
Front panel
aA (Power)
Switches this unit between on and standby modes.
bINFO
Changes the information shown on the front panel display (p. 7).
cMEMORY
Registers FM/AM stations as preset stations (p. 32). J1
dPRESET j / i
Selects an FM/AM preset station (p. 32). J1
eFM
Sets the FM/AM tuner band to FM (p. 30). J1
fAM
Sets the FM/AM tuner band to AM (p. 30). J1
gTUNING jj / ii
Changes FM/AM tuner frequencies (p. 30). J1
hFront panel display
Displays information on this unit (p. 7).
iPHONES jack
For plugging headphones in. Sound effects applied during playback
can also be heard through the headphones.
jINPUT l / h
Selects an input source from which to playback. Press either the left or
right key repeatedly to cycle through the input sources in order.
kSCENE
Switches the input source and the sound field program with a single
button (p. 26). Press this key when this unit is in standby mode to
switch on the unit.
lTONE CONTROL
Adjusts high-frequency/low-frequency output of speakers/headphones
(p. 25).
mPROGRAM l / h
Switches between the sound field effect (sound field program) you are
using and the surround sound decoder (p. 26). Press either the left
or right key repeatedly to cycle through the input sources in order.
nSTRAIGHT
Changes a sound field program to straight decoding mode (p. 27).
oVIDEO AUX jacks
For connecting video cameras, game consoles, and portable music
players to this unit temporarily.
Attach the supplied VIDEO AUX input cover when not using this
jack.
pVOLUME
Adjusts the volume level.
Part names and functions
VIDEO
AUX
PHONES
SILENT
CINEMA
TONE
CONTROL
STRAIGHT
VOLUME
TV
BD
DVD
CD
RADIO
INPUT PROGRAM
SCENE
VIDEO
AUDIO
PORTABLE
LR
INFO
MEMORY
PRESET
FM AM
TUNING
hb
l nj m
a ed
ki p
fc g
o
J1 : Usable when you have selected tuner input.
En 6
INTRODUCTION
Part names and functions
Rear panel
aDOCK jack
For connecting an optional Yamaha iPod universal dock (such as
YDS-12) or Bluetooth wireless audio receiver (YBA-10) (p. 33,
p. 35).
bHDMI OUT jack
For connecting an HDMI - compatible TV to output audio/video
signals to (p. 14).
cHDMI1-4 jacks
For connecting external components equipped with HDMI-
compatible outputs to receive audio/video signals from (p. 16).
dANTENNA jacks
For connecting AM and FM antennas (p. 21).
eCOMPONENT VIDEO jacks
For connecting TV that are compatible with component video signals,
using three cables to output video signal (p. 14).
fAV1-5 jacks
For connecting to external devices equipped with audio/video outputs
so that this unit can receive audio/video signals (p. 17, p. 18).
gAV OUT jacks
For outputting audio/video signals received when analog inputs (AV3-
5 or AUDIO1-2) are selected (p. 20).
hAUDIO1-2 jacks
For connecting to external components equipped with analog audio
outputs to input sound into this unit (p. 19).
iMONITOR OUT jack
For connecting a TV capable of receiving video input, and outputting
video signals to it (p. 15).
jAUDIO OUT jacks
For outputting audio signals received when analog inputs such as the
AV5 or AUDIO1-2 jacks are selected (p. 20).
kSUBWOOFER jack
For connecting a subwoofer with a built-in amplifier (p. 12).
lSPEAKER terminals
For connecting the front, center, and surround speakers (p. 12).
mPower cord
For connecting this unit to an AC wall outlet.
ANTENNA
FM
GND
AM
COMPONENT
VIDEO
P
R
P
B
Y
OPTICAL
( TV )
AV 1AV 2AV 3AV 4AV 5
AUDIO 1 AUDIO 2
COAXIAL
(CD)
COAXIAL OPTICAL
VIDEO
CENTER
SURROUND
HDMI 1
(BD/DVD)
HDMI 2 HDMI 3
HDMI 4
FRONT
COMPONENT
VIDEO
MONITOR OUT
P
R
P
B
Y
HDMI
OUT
MONITOR OUT
AV
OUT
SUBWOOFER
AUDIO
OUT
COMPONENT
VIDEO
MONITOR OUT
P
R
P
B
Y
HDMI
OUT
MONITOR OUT
AV
OUT
SUBWOOFER
ANTENNA
FM
G
ND
C
OMPONENT
VIDEO
P
R
P
B
Y
PTI
A
(
TV
)
AV 1
AV 2
AV 3
AV 4
AV 5
AUDIO 1
AUDIO 2
CO
AXIA
L
(
CD
)
CO
AXIA
L
O
PTI
C
AL
VIDE
O
SURRO
U
H
DMI 1
(
BD
/
DVD
)
H
DMI 2
H
DMI
3
HDMI 4
DOC
K
DOCK
SPEAKERS
ac
fg khj l
d
e i
b
m
Distinguishing the input and output jacks
The area around the audio/video output jacks is
marked in white to prevent connection errors.
Use these jacks to output audio/video signals
to a TV or other external component.
Output jacks
En 7
INTRODUCTION
Part names and functions
Front panel display
aHDMI indicator
Lights up during normal HDMI communication when any of the
HDMI 1-4 inputs are selected.
bCINEMA DSP indicator
Lights up when a sound field effect that uses CINEMA DSP
technology is selected.
cTuner indicator
Lights up when receiving an FM/AM broadcast.
diPod CHARGE indicator
Lights up when an iPod/iPhone is connected through an optional
Yamaha iPod universal dock (such as YDS-12), and the iPod Standby
Charge function is active (p. 34).
eSLEEP indicator
Lights up when the sleep timer is activated (p. 8).
fMUTE indicator
Flashes when audio is muted.
gVOLUME indicator
Displays the current volume level.
hCursor indicators
Light up if corresponding cursors on the remote control are available
for operations.
iMulti information display
Displays a range of information on menu items and settings.
jSpeaker indicators
Indicate speaker terminals from which signals are output.
SW
C
LR
SL SR
Front speaker L
Surround speaker L
Subwoofer
Front speaker R
Surround speaker R
Center speaker
Changing the front panel display
The front panel can display sound field programs and surround
decoder names as well as the active input source.
Press fINFO repeatedly to cycle through input source
sound field program surround decoder in order. J1
SW
C
L
SL SR
R
Straight
HDMI1
VOL.
Input source name
Sound field program (DSP program)
STEREO
SLEEP
VOL.
TUNED
SW
C
LR
SL SR
MUTE
iPod
CHARGE
abcedgf
hi jh
J1 : While selecting a tuner input, the FM/AM frequency is displayed instead of the input source.
En 8
INTRODUCTION
Part names and functions
Remote control aRemote control signal transmitter
Transmits infrared signals.
bTRANSMIT
Lights up when a signal is output from the remote control.
cSOURCE A (SOURCE Power)
Switches an external component on and off.
dInput selector
Select an input source on this unit from which to playback.
eTuner keys
Operates the FM/AM tuner. These keys are used when using the tuner
input.
fINFO
Cycles the information displayed on the front panel display (the name
of the currently selected input source, the sound field program, the
surround decoder, the FM/AM tuner frequency, etc.)(p. 7).
gSound selection keys
Switch between the sound field effect (sound field program) you are
using and the surround decoder (p. 26).
hSCENE
Switches the input source and the sound field program with a single
button (p. 26). Press this key when this unit is in standby mode to
switch on the unit.
iSETUP
Displays a detailed Setup menu for this unit (p. 40).
jCursor B / C / D / E, ENTER, RETURN
kExternal component operation keys
Operate recording, playback, and menu displays etc. for external
components. J1
lNumeric keys
Enter numbers.
mTV control keys
Operate a monitor such as a TV.
nCODE SET
Sets remote control codes for external component operations (p. 50,
p. 54).
oRECEIVER A (RECEIVER Power)
Switches this unit between on and standby modes.
pSLEEP
Sets this unit to place itself in standby mode automatically after a
specified period of time has elapsed (sleep timer). Press this key
repeatedly to set the time for the sleep timer function. The front panel
display indicator lights up when the sleep timer is activated.
qOPTION
Displays the Option menu for each input source (p. 37).
rVOLUME +/-
Adjusts the volume level (p. 25).
sMUTE
Turns the mute function of the sound output on and off (p. 25).
RECEIVER
SCENE
OPTION
SETUP
RETURN
VOLUME
ENHANCER SUR. DECODE
STRAIGHT
HDMI
AV
AUDIO
TRANSMIT
SLEEP
1234
1234
125
V-AU X
TUNER
FM
INFO
MEMORY
AM
PRESET
TUNING
MOVIE MUSIC
STEREO
BD
DVD TV
CD
RADIO
MUTE
ENTER
7856
90
10
1234
REC
ENT
TV
TV VOL TV CH
TOP
MENU
DISPLAY
SOURCE
CODE SET
INPUT
MUTE
DOCK[ A ] [ B ]
POP-UP
MENU
a
c
b
po
d
e
g
h
iq
r
s
l
m
n
j
f
k
HDMI1-4 HDMI1-4 jacks
AV1-5 AV1-5 jacks
AUDIO1-2 AUDIO1-2 jacks
V-AUX Front panel VIDEO AUX jacks
[A]/[B] Changes the external component you operating
with the kExternal component operation
keys without changing inputs. J1
DOCK A Yamaha iPod universal dock or Bluetooth
wireless audio receiver connected to the DOCK
jack.
TUNER FM/AM tuner
FM Sets the FM/AM tuner band to FM.
AM Sets the FM/AM tuner band to AM.
MEMORY Presets radio stations.
PRESET F / GSelects a preset station.
TUNING H / IChanges tuning frequencies.
Cursor B / C / D / ESelect menu items and change settings when
settings menus, etc are displayed.
ENTER Confirms a selected item.
RETURN Returns to the previous screen when setting
menus are displayed, or ends the menu display.
Sleep 120min. Sleep 90min.
Sleep 60min.Sleep 30min.Sleep Off
JJ 1 : You can use separate kExternal component operation keys for each input source to operate registered components. Remote control codes must be registered for
each input in advance if you wish to operate external components (p. 50).
En 9
CONNECTIONS
This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and
connections in your listening environment.
Speaker channels and functions
Front left and right speakers
The front speakers are used for the front channel sounds (stereo sound) and effect sounds.
Front speaker layout:
Place these speakers at an equal distance from the ideal listening position in the front of the room.
When using a projector screen, the appropriate top positions of the speakers are about 1/4 of the screen
from the bottom.
Center speaker
The center speaker is for the center channel sounds (dialog, vocals, etc.).
Center speaker layout:
Place it halfway between the left and right speakers. When using a TV, place the speaker just above or
just under the center of the TV with the front surfaces of the TV and the speaker aligned.
When using a screen, place it just under the center of the screen.
Surround left and right speakers
The surround speakers are for effect and vocal sounds with the 5.1-channel speakers providing rear-
area sounds.
Surround speaker layout:
Place the speakers at the rear of the room on the left and right sides facing the listening position. They
should be placed between 60 degrees and 80 degrees from the listening position and with the speaker
tops at a height of 1.5 – 1.8 m from the floor.
Subwoofer
The subwoofer speaker is used for bass sounds and low-frequency effect (LFE) sounds included in
Dolby Digital and DTS. Use a subwoofer that is equipped with an internal amplifier.
Subwoofer speaker layout:
Place it exterior to the front left and right speakers facing slightly inward to reduce echoes from the
wall.
Connecting speakers
Ex.
Ex.
Ex.
Ex.
En 10
CONNECTIONS
Connecting speakers
Speaker layout
5.1-channel speaker layout (5 speakers + subwoofer)
Connecting speakers
Changing speaker impedance
This unit is configured for 8Ω speakers when it is dispatched from the factory.
When connecting to 6Ω speakers, carry out the following procedure to switch to 6Ω.
1Set this unit to the standby mode.
2Press A while pressing and holding STRAIGHT on the front panel.
Release the keys when “ADVANCED SETUP” is displayed on the front panel display.
After approximately 3 seconds, the top menu items are displayed. J1
3Check that “SP IMP.” is displayed on the front panel.
4Press STRAIGHT repeatedly to select a “6ΩMIN.
5Switch this unit to the standby mode, and then switch it on again.
The power turns on, when the settings you made has been configured.
Connect at least two speakers (front left and right).
If you cannot connect all five speakers, give priority to the surround speakers.
The surround speakers should be placed between 60 degrees and 80 degrees from the listening position.
CRT monitors
We recommend that you use magnetically shielded speakers to avoid video distortion, especially for
the front and center speakers near the screen.
If your screen still gets interference from magnetically shielded speakers, move the speakers farther
away from your TV.
60q
60q80q
80q
Front speaker R
Front speaker L
Center speaker
Surround speaker L
Surround
speaker R
Subwoofer
JJ 1 : See the section on “Extended functionality that can be configured as needed (Advanced Setup menu)” for details on the
Advanced Setup menu (p. 53).
PHONES
SILENT
CINEMA
TONE
CONTROL
STRAIGHT
TV
BD
DVD
CD
RADIO
INPUT PROGRAM
SCENE
INFO
MEMORY
PRESET
FM AM
STRAIGHT
A
En 11
CONNECTIONS
Connecting speakers
Connect your speakers to their respective terminals on the rear panel.
CAUTION
Remove the AC power cord of this unit from the power outlet before connecting the speakers.
Generally speaker cables consist of two parallel insulated cables. One of these cables is a different
color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined)
cable into the “+” (positive, red) terminal on this unit and the speakers, and the other cable into the “-”
(minus, black) terminal.
Be careful that the core of the speaker cable does not touch anything or come into contact with the metal
areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit,
“CHECK SP WIRES!” will appear on the front panel display when this unit is switched on.
ANTENNA
FM
GND
AM
AUDIO 2
CENTER
SURROUND
H
DMI 4
FRONT
O
R OUT
SUBWOOFER
AUDI O
OUT
SPEAKERS
R L
R L
Surround speaker
Front speaker
Subwoofer Center speaker
En 12
CONNECTIONS
Connecting speakers
Connecting front speakers
1Remove approximately 10mm of insulation from the
ends of the speaker cables, and twist the bare wires
of the cables together firmly so that they will not
cause short circuits.
2Loosen the speaker terminals.
3Insert the bare wire of the speaker cable into the gap
on the side of the terminal.
4Tighten the terminal.
Connecting center speakers / surround
speakers
1Press the tab on the speaker terminal down.
2Insert the speaker cable end into the terminal.
3Lift the tab to fix the speaker cable in place.
Connecting the subwoofer
1Connect the subwoofer input jack to the
SUBWOOFER jack on this unit with an audio pin
cable.
2Set the subwoofer volume as follows.
Volume: Set to approximately half volume (or slightly less than
half).
Crossover frequency (if available): Set to maximum.
Connecting the banana plug (Except U.K., Europe,
Asia and Korea models)
Tighten the knob, and then insert the banana plug into the end of
the terminal.
FRONT
KERS
2
2
3
1
4
4
FRONT
KERS
Banana plug
CENTER
SURROUND
SPEAKE
2
2
3
3
1
1
VOLUME
MIN MAX
CROSSOVER/
HIGH CUT
MIN MAX
Subwoofer examples
En 13
CONNECTIONS
Cable plugs and jacks
The main unit is equipped with the following input/output jacks. Use jacks and cables appropriate for
components that you are going to connect.
Audio/Video jacks
HDMI jacks
Digital video and digital sound are transmitted through a single jack.
Only use an HDMI cable.
Analog video jacks
Audio jacks
Connecting external devices
Use a 19-pin HDMI cable with the HDMI logo.
We recommend using a cable less than 5.0 m long to prevent signal quality degradation.
COMPONENT VIDEO jacks
The signal is separated into three components:
luminance (Y), chrominance blue (PB), and
chrominance red (PR).
Use component video pin cables with three plugs.
VIDEO jack
This jack transmits conventional analog video
signals.
Use video pin cables.
HDMI cable
Component video pin cable Video pin cable
OPTICAL jacks
These jacks transmit optical digital audio signals.
Use fiber-optic cables for optical digital audio
signals.
COAXIAL jacks
These jacks transmit coaxial digital audio signals.
Use pin cables for digital audio signals.
AUDIO jacks
These jacks transmit conventional analog audio
signals.
Use stereo pin cables, connecting the red plug to
the red R jack, and the white plug to the white L
jack.
PORTABLE jack
This jack transmits conventional analog audio
signals.
Use a stereo mini-plug cable when connecting.
Digital audio fiber-optic cable Digital audio pin cable
Stereo audio pin cable Stereo mini-plug cable
En 14
CONNECTIONS
Connecting external devices
Connecting a TV monitor
This unit is equipped with the following three types of output jack for connection to a TV.
HDMI OUT, COMPONENT VIDEO or VIDEO. Select the proper connection according to the input
signal format supported by your TV.
This unit will receive HDMI, component, or video signals in the same format as transmitted by the
output devices.
For example, these three output devices must be connected to the monitor by matching input/output
jacks and cables, and then you must change the TV’s input mode to the proper setting.
Connecting an HDMI video monitor
Connect the HDMI cable to the HDMI OUT jack.
Connecting a component video monitor
Connect the component video cable to the COMPONENT VIDEO (MONITOR OUT) jacks.
COMPONENT
VIDEO
MONITOR OUT
P
R
P
B
Y
HDMI
OUT
MONITOR OUT
COMPONENT
V
IDEO
P
R
P
B
Y
V
IDE
O
HDMI
1
(
B
D/DV
D
)
HDMI 2
H
DMI 3
HDMI 4
DOCK
HDMI OUT jack
COMPONENT VIDEO jacks
(MONITOR OUT)
VIDEO jack
(MONITOR OUT)
COMPONENT
VIDEO
HDMI
VIDEO
COMPONENT
VIDEO
HDMI
VIDEO
Input Output TV
HDMI input
Component
video input
Video input
Use a 19-pin HDMI cable with the HDMI logo.
We recommend using a cable less than 5.0 m long to prevent signal quality degradation.
HDMI
OUT
C
OMPONEN
T
V
IDE
O
P
R
P
B
Y
O
PTICA
L
(
TV
)
AV 1
AV 2
AV 3
AV 4
AV 5
AUDI O 1
AUDI O 2
CO
AXIA
L
(
C
D
)
CO
AXIAL
O
PTI
C
A
L
V
IDE
O
HDMI
1
(
B
D/DV
D
)
HDMI 2
HDMI
3
HDMI 4
CO
MP
O
NEN
T
V
IDE
O
MO
NIT
O
R
OUT
P
R
P
B
Y
M
O
NIT
O
R
OUT
AV
OU
T
AUDI
O
OUT
DOCK
HDMI
HDMI
HDMI
HDMI input
TV
COMPONENT
VIDEO
MONITOR OUT
P
R
P
B
Y
COMPONENT
V
IDE
O
P
R
P
B
Y
O
PTICA
L
(
TV
)
AV 1
AV 2
AV 3
AV 4
AV 5
AUDI O 1
AUDI O 2
CO
AXIA
L
(
C
D
)
CO
AXIAL
O
PTI
C
AL
V
IDE
O
HDMI
1
(
BD/DV
D
)
HDMI 2
H
DMI
3
HDMI 4
HDM
I
OU
T
MO
NIT
O
R
OUT
AV
O
UT
A
UDI
O
OU
T
D
OCK
COMPONENT
VIDEO
Y
P
R
P
B
Y
P
R
P
B
Component video input
TV
En 15
CONNECTIONS
Connecting external devices
Connecting a video monitor
Connect the video pin cable to the VIDEO (MONITOR OUT) jack.
Listening to TV audio
To transmit sound from the TV to this unit, connect its AV1-5 or AUDIO1-2 jacks to the TV’s
AUDIO OUT jacks.
If the TV supports optical digital audio output, we recommend that you connect the TV audio output
to the receiver’s AV4 jack. Connecting to AV4 allows you to switch the input source to AV4 with just
a single key operation using the SCENE function (p. 26).
You can control your TV using the receiver’s remote control by entering the TV’s remote control
code (p. 50).
MONITOR OUT
COMPONENT
V
IDE
O
P
R
P
B
Y
O
PTICA
L
(
TV
)
AV 1
AV 2
AV 3
AV 4
AV 5
AUDI O 1
AUDI O 2
CO
AXIA
L
(
C
D
)
CO
AXIAL
O
PTI
C
AL
V
IDE
O
HDMI
1
(
BD/DV
D
)
HDMI 2
H
DMI
3
HDMI 4
CO
MP
O
NEN
T
V
IDEO
M
O
NIT
O
R
OUT
P
R
P
B
Y
HDM
I
OU
T
AV
O
UT
A
UDI
O
OU
T
D
OCK
VIDEO
V
V
Video input
TV
OPTICAL
CO
MP
O
NEN
T
VIDE
O
P
R
P
B
Y
O
PTICA
L
AV 1
AV 2
AV 3
AV 5
AUDIO 1
AUDIO 2
CO
AXIAL
(
C
D
)
CO
AXIA
L
VIDE
O
HDMI 1
(
BD
/
DV
D
)
HDMI 2
HDMI
3
HDMI
4
COMPONEN
T
V
IDE
O
M
O
NIT
O
R
O
U
T
HDMI
O
U
T
MO
NIT
O
R
O
U
T
AV
O
UT
A
U
DI
O
O
U
T
D
OC
K
Y
P
B
P
R
OPTICAL
O
O
Audio output
(Optical)
TV
En 16
CONNECTIONS
Connecting external devices
Connecting BD/DVD players and other devices
This unit has the following input jacks. Connect them to the appropriate output jacks on
the external components.
Connecting BD/DVD players and other devices with
HDMI
Connect the device with an HDMI cable to one of the HDMI1-4 jacks.
Select the HDMI input (HDMI1-4) that the external device is connected to for
playback.
OPTION
HDMI
1234
ENTER
7
8
5
6
9
0
10
1
2
3
4
R
E
C
ENT
TV
TV V
O
L TV
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
S
ET
UP
RETURN
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
AV
A
UDI
O
TRAN
S
MI
T
S
LEE
P
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
MU
T
E
TO
P
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
CO
DE
S
E
T
D
OC
K
[
A
]
[
B
]
q
j
d
dInput selector
jCursor C / D / E
jENTER
qOPTION
Input jack Video input Audio input
HDMI1 HDMI HDMI
HDMI2 HDMI HDMI
HDMI3 HDMI HDMI
HDMI4 HDMI HDMI
AV1 Component video Optical
AV2 Component video Coaxial digital
AV3 Video Coaxial digital
AV4 Video Optical
AV5 Video Analog (Stereo)
AUDIO1 Analog (Stereo)
AUDIO2 Analog (Stereo)
VIDEO AUX Video Analog (Stereo)
(BD/DVD)
COMPONENT
VIDE
O
P
R
P
B
Y
OPTICAL
(
TV
)
AV 1
AV 2
AV 3
AV 4
AV 5
AUDI O 1
AUDI O 2
CO
AXIAL
(
C
D
)
CO
AXIAL
O
PTI
C
AL
VIDE
O
CO
MP
O
NEN
T
VIDEO
M
O
NIT
O
R
OU
T
P
R
P
B
Y
H
DMI
OU
T
MO
NIT
O
R
OU
T
AV
O
UT
A
UDIO
OU
T
D
OCK
HDMI
HDMI
HDMI
HDMI output
BD/DVD player
Receiving audio from other input sources
This unit can use the AV1-5 or AUDIO1-2 input jacks to receive audio signals from
other audio input sources.
For example, if an external device cannot produce audio signals from an HDMI jack,
use the following method to change the audio input.
1Use the dInput selector to select the desired HDMI input source.
2Press qOPTION to display the Option menu. J1
3Press jCursor C until “Audio In” is displayed, and then press
jENTER.
4Press jCursor D / E to select the audio input source.
5Once you have completed the setup, press qOPTION to close the
Option menu.
JJ 1 : See the section on “Configuring the settings specific for each input source (Option menu)” for details on
the Option menu (p. 37).
OPTICAL
(BD/DVD)
CO
MP
O
NENT
VIDEO
P
R
P
B
Y
(
TV
)
AV 2
AV 3
AV 4
AV 5
AUDIO 1
AUDIO 2
CO
AXIA
L
(
C
D
)
CO
AXIAL
O
PTI
C
A
L
VIDEO
HDMI 2 HDMI
3
HDMI 4
CO
MP
O
NEN
T
V
IDE
O
MONITOR OUT
P
R
P
B
Y
OUT
M
O
NIT
O
R
OUT
AV
OU
T
A
UDI
O
OU
T
DOCK
HDMI
OPTICAL
HDMI
HDMI
O
O
HDMI/Audio (Optical)
output
BD/DVD player
SW
C
L
SL SR
R
Audio;;;;;;AV1
HDMI1 VOL.
If you have selected AV1 input audio (optical digital)
En 17
CONNECTIONS
Connecting external devices
Connecting BD/DVD players and other devices with component
cables
Connect the device with a component video cable to one of the AV1-2 input jacks.
Using optical digital audio output sources
Select the AV1 input that the external device is connected to for playback.
Using coaxial digital audio output sources
Select the AV2 input that the external device is connected to for playback.
COMPONENT
VIDEO
P
R
P
B
Y
OPTICAL
AV 1
(
TV
)
AV 2
AV 3
AV 4
AV 5
AUDI O 1
AUDI O 2
CO
AXIAL
(
CD
)
CO
AXIA
L
O
PTI
C
A
L
VIDE
O
HDMI
1
(
B
D/DVD
)
HDMI 2
HDMI
3
HDMI 4
CO
MP
O
NENT
VIDE
O
MO
NIT
O
R
OU
T
P
R
P
B
Y
HDM
I
OUT
M
O
NIT
O
R
OU
T
AV
OU
T
AUDI O
OUT
DOC
K
COMPONENT
VIDEO
Y
P
R
P
B
Y
P
R
P
B
O
OPTICAL
O
Component video / Audio (Optical)
output
BD/DVD player
AV 2
COAXIAL
C
OMPONEN
T
VIDE
O
P
R
P
B
Y
OPTICAL
(
TV
)
AV 1
AV 3
AV 4
AV 5
AUDI O 1
AUDI O 2
(
CD
)
CO
AXIA
L
O
PTI
C
A
L
VIDE
O
HDMI
1
(
B
D/DVD
)
HDMI 2
HDMI
3
HDMI 4
CO
MP
O
NENT
VIDE
O
MO
NIT
O
R
OU
T
P
R
P
B
Y
HDM
I
OUT
M
O
NIT
O
R
OU
T
AV
OU
T
AUDI O
OUT
DOC
K
COMPONENT
VIDEO
COAXIAL
Y
P
R
C
P
B
Y
P
R
P
B
C
Component video / Audio (Coaxial)
output
BD/DVD player
Component connections to analog audio output devices
You can use the video input from the AV1-2 jacks in combination with the audio input from other
AV inputs or AUDIO1-2.
When connecting these devices, select the AV3-5 or the AUDIO1-2 jacks as the audio input for AV1
or AV2. See “Receiving audio from other input sources” (p. 16) for detailed setup guidance.
Select the AV input source (AV1-2) that is connected by component video cable to the external
device for playback.
COMPONENT
VIDEO
P
R
P
B
Y
O
PTI
C
A
L
(
TV
)
AV 1
AV 2
AV 3
AV 4
AUDIO 1
AUDIO 2
CO
AXIA
L
(
CD
)
CO
AXIAL
O
PTI
C
AL
V
IDE
O
HDMI 1
(
BD/DV
D
)
HDMI
2
HDMI
3
HDMI 4
CO
MP
O
NEN
T
V
IDE
O
M
O
NIT
O
R
OUT
HDMI
OUT
MO
NIT
O
R
OUT
AV
O
U
T
A
UDI
O
OU
T
DOCK
Y
P
B
P
R
AUDIO
COMPONENT
VIDEO
R
L
R
LY
P
R
P
B
Y
P
R
P
B
Component video / Audio
output
Game console
SW
C
L
SL SR
R
Audio;;;AUDIO1
AV1 VOL.
En 18
CONNECTIONS
Connecting external devices
Connecting BD/DVD players and other devices with video cables
Connect the external device with a video pin cable to one of the AV3-5 input jacks.
Using optical digital audio output sources
Select the AV4 input that the external device is connected to for playback.
Using coaxial digital audio output sources
Select the AV3 input that the external device is connected to for playback.
Using analog stereo audio output sources
Select the AV5 input that the external device is connected to for playback.
TV
OPTICAL
C
OMPONEN
T
VIDE
O
P
R
P
B
Y
OPTICAL
AV 1
AV 2
AV 3
AV 5
AUDI O 1
AUDI O 2
CO
AXIAL
(
CD
)
CO
AXIA
L
VIDE
O
HDMI
1
(
B
D/DVD
)
HDMI 2
HDMI
3
HDMI 4
CO
MP
O
NENT
VIDE
O
MO
NIT
O
R
OU
T
HDM
I
OUT
M
O
NIT
O
R
OU
T
AV
OU
T
AUDI O
OUT
DOC
K
Y
P
B
P
R
VIDEO
OPTICAL
VV
O
O
Video / Audio (Optical)
output
BD/DVD player
(CD)
COAXIAL
VIDEO
C
OMPONEN
T
VIDE
O
P
R
P
B
Y
OPTICAL
(
TV
)
AV 1
AV 2
AV 4
AV 5
AUDI O 1
AUDI O 2
CO
AXIAL
O
PTI
C
A
L
HDMI
1
(
B
D/DVD
)
HDMI 2
HDMI
3
HDMI 4
CO
MP
O
NENT
VIDE
O
MO
NIT
O
R
OU
T
HDM
I
OUT
M
O
NIT
O
R
OU
T
AV
OU
T
AUDI O
OUT
DOC
K
Y
P
B
P
R
VIDEO
COAXIAL
VV
C
C
Video / Audio (Coaxial)
output
BD/DVD player
AV 5
C
OMPONEN
T
VIDE
O
P
R
P
B
Y
OPTICAL
(
TV
)
AV 1
AV 2
AV 3
AV 4
AUDIO 1
AUDI O 2
CO
AXIAL
(
CD
)
CO
AXIA
L
O
PTI
C
A
L
VIDE
O
HDMI
1
(
B
D/DVD
)
HDMI 2
HDMI
3
HDMI 4
CO
MP
O
NENT
VIDE
O
MO
NIT
O
R
OU
T
HDM
I
OUT
M
O
NIT
O
R
OU
T
AV
OU
T
AUDI O
OUT
DOC
K
Y
P
B
P
R
AUDIO
VIDEO
R
L
R
L
V
V
Video / Audio
output
BD/DVD player
En 19
CONNECTIONS
Connecting external devices
Connecting CD players and other audio devices
Using analog stereo output sources
Select the audio input (AUDIO1-2) that the external device is connected to for playback.
Using optical digital output sources
Select the AV input (AV1 or AV4) that the external device is connected to for playback.
Using coaxial digital output sources
Select the AV input (AV2 or AV3) that the external device is connected to for playback.
AUDI O 1 AUDI O 2
C
OMPONEN
T
VIDE
O
P
R
P
B
Y
OPTICAL
(
TV
)
AV 1
AV 2
AV 3
AV 4
AV 5
CO
AXIAL
(
CD
)
CO
AXIA
L
O
PTI
C
A
L
VIDE
O
HDMI
1
(
B
D/DVD
)
HDMI 2
HDMI
3
HDMI 4
CO
MP
O
NENT
VIDE
O
MO
NIT
O
R
OU
T
HDM
I
OUT
M
O
NIT
O
R
OU
T
AV
OU
T
AUDI O
OUT
DOC
K
Y
P
B
P
R
AUDIO
R
L
R
L
Audio output
CD player
OPTICAL
TV
OPTICAL
C
OMPONEN
T
VIDE
O
P
R
P
B
Y
AV 2
AV 3
AV 5
AUDI O 1
AUDI O 2
CO
AXIAL
(
CD
)
CO
AXIA
L
VIDE
O
HDMI
1
(
B
D/DVD
)
HDMI 2
HDMI
3
HDMI 4
CO
MP
O
NENT
VIDE
O
MO
NIT
O
R
OU
T
P
R
P
B
Y
HDM
I
OUT
M
O
NIT
O
R
OU
T
AV
OU
T
AUDI O
OUT
DOC
K
O
O
OPTICAL
CD player
Audio (Optical) output
We recommend connecting audio devices with an coaxial digital output to the AV3 coaxial digital
jack on this unit. This connection allows you to switch to the AV input 3 just by pressing the “CD”
SCENE key (p. 26).
COAXIAL
(CD)
COAXIAL
C
OMPONEN
T
VIDE
O
P
R
P
B
Y
OPTICAL
(
TV
)
AV 1
AV 4
AV 5
AUDIO 1
AUDI O 2
O
PTI
C
A
L
VIDE
O
HDMI
1
(
B
D/DVD
)
HDMI 2
HDMI
3
HDMI 4
CO
MP
O
NENT
VIDE
O
MO
NIT
O
R
OU
T
HDM
I
OUT
M
O
NIT
O
R
OU
T
AV
OU
T
AUDI O
OUT
DOC
K
Y
P
B
P
R
C
C
COAXIAL
Audio (Coaxial) output
CD player
En 20
CONNECTIONS
Connecting external devices
Connecting video cameras and portable audio players
Use the VIDEO AUX jacks on the front panel to temporarily connect video cameras, game consoles, or
portable audio devices to the receiver.
Select the V-AUX input to use these connected devices.
Transmitting input A/V to external devices
This receiver can transmit selected incoming analog audio/video signals to external devices through the
AV OUT and AUDIO OUT jacks. You can record these input audio and video signals to VCRs or
similar devices, or send them to other TVs or external devices.
Using the AV OUT jacks
Connect this jacks to the external device’s video input jack and analog audio input jacks.
Using the AUDIO OUT jacks
Connect this jack to the external device’s analog audio input jacks.
Be sure to turn down the volume when connecting this unit and the other devices.
When external components are connected to both the PORTABLE jack and the AUDIO jacks, the sound
output from the PORTABLE jack is transmitted.
VIDEO
AU X
STRAIGHT
RADIO
VIDEO
AUDIO
PORTABLE
LR
VR
L
L
R
V
AU D I O
VIDEO
AUDIO OUT
Audio output
Portable audio player Video cameras
Audio output
Video output
HDMI audio/video signals, component video signals, and digital audio signals cannot be transmitted
from these jacks.
AV
OUT
AUDI O
OUT
CO
MP
O
NENT
VIDE
O
P
R
P
B
Y
O
PTI
C
AL
(
TV
)
AV 1
AV 2
AV 3
AV 4
AV 5
AUDI O 1
AUDI O 2
CO
AXIAL
(
CD
)
CO
AXIAL
O
PTI
C
AL
VIDE
O
HDMI 1
(
BD
/
DV
D
)
HDMI
2
HDMI
3
HDMI
4
CO
MP
O
NEN
T
VIDE
O
MONITOR OUT
P
R
P
B
Y
HDMI
O
UT
MO
NIT
O
R
OU
T
DOC
K
AUDIO
VIDEO
R
L
V
AUDIO
R
L
R
L
V
R
L
Audio recorder
Audio input
VCR
Video / Audio
input
En 21
CONNECTIONS
An indoor FM antenna and an AM loop antenna are included with this receiver. Connect these antennas
properly to their respective jacks.
Connecting the FM/AM antennas
Improving FM reception
We recommend using an outdoor antenna. For more information, consult the nearest authorized
dealer.
Improving AM reception
Connect this unit to an outdoor antenna with a 5-10 m vinyl-coated wire. Make sure the AM loop
antenna is still connected.
Connecting the GND jack can reduce noise. Connect the jack to a store-bought ground bar or copper
plate with a vinyl-covered wire and bury this new attachment in moist ground.
The GND jack is not to be connected to the ground socket of an electrical outlet.
FM
GND
AM
C
ENTER
SU
RR
OU
N
D
H
DMI
3
HDMI 4
F
R
O
NT
MONITOR OUT
S
PEAKER
S
Indoor FM antenna AM loop antenna
Position the AM antenna away from the receiver. The
wires of the AM antenna have no polarity.
You can connect either wire to the AM jack or the
GND jack.
Connecting the AM loop antenna
ReleaseInsertPress and hold
En 22
CONNECTIONS
When you have finished connecting your speakers,
configure this unit so that they output sound normally.
Carry out the following steps to configure this unit.
STEP 1: Display the setting menu
Display the Setup menu from which you can configure
all settings for this unit, and then display the menu for
speaker settings.
STEP 2: Set the speaker status and size
Set the size and connection status of speakers and
subwoofers, and whether to designate a specific speaker
(or subwoofer) for low-frequency sound.
STEP 3: Set the distance from the listening
point
Set the distance between the speakers and the listening
point so that the sound from each speaker reaches the
listening point at the appropriate timing.
STEP 4: Playback a test tone
Playback a test tone to allow you to configure sound
volumes while listening to the actual effect your settings
are having.
STEP 5: Adjust the volume
Adjust the volume for each speaker and configure them
so that the sound is balanced.
STEP 1: Display the setting menu
1Switch this unit on.
2Press iSETUP on the remote control.
The Setup menu that allows you to configure all
parameters on this unit appears. J1
3Check that “Speaker Setup” appears and
press jENTER.
This completes step 1.
STEP 2: Set the speaker status and
size
The settings in step 2 are not necessary with the
following speaker configuration:
Front speaker: woofer diameter is 16 cm or larger
Center/surround speakers: woofer diameter is 16 cm or
smaller
Subwoofer: connected
4Check that “Config” appears and press
jENTER.
Setting up speaker parameters
iSETUP
jENTER
SETUP
ENTER
7
8
5
6
9
0
10
1
2
3
4
R
E
C
ENT
TV
TV V
O
L TV
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
O
PTI
O
N
RETURN
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MI
T
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
MU
T
E
TO
P
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
CO
DE
S
E
T
D
OC
K
[
A
]
[
B
]
j
i
SW
C
L
SL SR
R
SpeakerSetup
SETUP VOL.
SW
C
L
SL SR
R
Config
SP SET VOL.
SW
C
L
SL SR
R
Subwoofer;;Yes
CONFIGVOL.
Continues to the
next page
J1 : See the section “Setting various functions (Setup menu)” for
details on the Setup menu (p. 40).
En 23
CONNECTIONS
Setting up speaker parameters
5Use jCursor B / C to select the speaker
(subwoofer) you want to configure, and
then use jCursor D / E to select speaker
status and size.
When you have completed the settings for one speaker,
repeat the same procedure for all speakers to complete
settings.
6Press jRETURN when setting is complete.
Return to the previous menu.
This completes step 2.
STEP 3: Set the distance from the
listening point
7Press jCursor C to display “Distance” and
press jENTER.
8Press jCursor B / C to select the speaker
that you want to configure, and press
jCursor D / E to change the distance.
If necessary, you can change the setting units under
“Unit.
When you have completed the settings for one speaker,
repeat the same procedure for all speakers to complete
settings.
9Press jRETURN when setting is complete.
Return to the previous menu.
This completes step 3.
RETURN
ENTER
7
8
5
6
9
0
10
1
2
3
4
R
EC
ENT
TV
TV V
O
L TV
CH
I
NPUT
M
U
TE
RECEIVER
SC
ENE
O
PTI
ON
S
ET
UP
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MIT
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VI
E
MUS
I
C
S
TERE
O
BD
D
VD
TV
C
D
R
ADI
O
MU
T
E
T
O
P
MENU
PO
P-
UP
MENU
DI
S
PLAY
SOU
R
CE
CO
DE
S
ET
D
OCK
[
A
]
[
B
]
j
jCursor B / C / D / E
jENTER
jRETURN
Information Description Setting
Subwoofer Sets the subwoofer status. Yes/None
Front Selects the size (sound
reproduction capacity) of the
front speakers.
Small/Large
Center Selects the size of the center
speakers. Choose “None” if
you do not have a center
speaker connected.
None/Small/
Large
Sur. LR Selects the size of the surround
speakers. Choose “None” if
you do not have surround
speakers connected.
None/Small/
Large
Crossover Audio with a frequency below
this limit will be output from
the subwoofer or the front
speakers.
40Hz to
200Hz
SWFR Phase Switches the phase of the
subwoofer.
Normal/
Reverse
Extra Bass Selects whether to play front
channel low-frequency
components through either of
the front speakers or the
subwoofer (Off), or through
both the subwoofer and front
speakers (On).
On/Off
Whether or not you set “Crossover,” “SWFR Phase,
and “Extra Bass” is optional. Check how the effects
sound and then configure them to your liking.
Use the following as a guide when setting speaker
sizes.
When speaker size is set to “Small,” low-frequency
components of the speakers you configured are
produced from the subwoofer (or from the front
speakers if there is no subwoofer).
Woofer diameter
16 cm or larger Large
16 cm or smaller Small
SW
C
L
SL SR
R
Unit;;;;;;feet
DIST VOL.
Information Description Setting
Unit Switches between setting
units (feet / meters).
feet (ft) /
meters (m)
Front L Front speaker L 1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Front R Front speaker R 1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Center Center speaker 1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Sur. L Surround speaker L 1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Sur. R Surround speaker R 1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
SWFR Subwoofer 1.0 ft to 80.0 ft
(0.30 m to 24.0 m)
Continues to the
next page
En 24
CONNECTIONS
Setting up speaker parameters
STEP 4: Playback a test tone
10 Press jCursor C repeatedly to display
“Test Tone” and press jENTER.
11 Use jCursor D / E to select “On.
A test tone plays back as soon as you select “On.
The test tone plays back in a clockwise fashion, as
follows.
12 Check that the test tone is playing back
and press jRETURN.
Return to the previous menu.
This completes step 4.
STEP 5: Adjust the volume
13 Press jCursor B repeatedly to display
“Level” and press jENTER.
14 Use jCursor B / C to switch the speaker
that is outputting the test tone, looking
for speakers with a different volume level
to the others.
The front panel display shows the speaker that is
outputting the test tone. J1
15 If you find a speaker with a different
volume level to the others, use jCursor
D / E to adjust the volume. Use Front
speaker L or R as a default when
adjusting volumes.
To raise the volume: Press jCursor E.
To lower the volume: Press jCursor D.
16 Repeat steps 14 and 15 to adjust the
volume balance for all speakers to your
preference.
17 Press jRETURN when setting is
complete.
Return to the previous menu.
This completes step 5.
18 Repeat procedures 10-12 (step 4) to stop
playback of the test tone.
19 Once you have completed all settings,
press iSETUP to close the Setup menu.
SETUP
RETURN
ENTER
7
8
5
6
9
0
10
1
2
3
4
R
EC
ENT
TV
TV V
O
L TV
CH
I
NPUT
M
U
TE
RECEIVER
SC
ENE
O
PTI
ON
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MIT
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VI
E
MUS
I
C
S
TERE
O
BD
D
VD
TV
C
D
R
ADI
O
MU
T
E
T
O
P
MENU
PO
P-
UP
MENU
DI
S
PLAY
SOU
R
CE
CO
DE
S
ET
D
OCK
[
A
]
[
B
]
j
i
iSETUP
jCursor B / C / D / E
jENTER
jRETURN
SW
C
L
SL SR
R
>OffOn
TEST VOL.
Front L Front R
Center
Subwoofer
Surround L Surround R
Information Speakers
FL Front speaker L
FR Front speaker R
CCenter speaker
SL Surround speaker L
SR Surround speaker R
SWFR Subwoofer
SW
C
L
SL SR
R
FL----d----
d
LEVELVOL.
J1 : Only speakers configured for use in procedure 5 output the test
tone.
En 25
PLAYBACK
1Turn on external components (TV, DVD
player, etc.) connected to this unit.
2Turn on this unit and select the input source
using dInput selector.
The name of the selected input source is displayed for
a few seconds. J1
3Play the external component that you have
selected as the source input, or select a
radio station on the tuner.
Refer to the instruction manuals provided with the
external component for details on playback.
For details on the following operations, refer to the
corresponding pages:
“FM/AM tuning” (p. 30)
“Playing back tunes from your iPod™/iPhone™”
(p. 33)
“Playing back tunes from Bluetooth™ components”
(p. 35)
4Press rVOLUME +/- to adjust the volume.
To mute the output.
Press sMUTE to mute the audio output.
Press sMUTE again to unmute.
Adjusting high/low-frequency sound
(Tone control)
You can adjust the balance of the high-frequency range
(Treble) and low-frequency range (Bass) of sounds
output from the front left and right speakers to obtain
desired tone.
1Press TONE CONTROL on the front panel
repeatedly to select “Treble” or “Bass.
The current setting is displayed on the front panel
display.
2Press PROGRAM l / h to adjust the output
level in those frequency ranges.
The display returns to the previous display soon after
you release the key.
Basic playback procedure
VOLUME
HDMI
AV
AUDIO
1234
1234
125
V-AUX
TUNER
MUTE
DOCK[ A ] [ B ]
7
8
5
6
9
0
10
1
2
3
4
R
E
C
ENT
TV
TV V
O
L TV
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
O
PTI
O
N
S
ET
UP
RETURN
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
TRAN
S
MI
T
S
LEE
P
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
E
NTER
TO
P
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
CO
DE
S
E
T
s
r
d
dInput selector
rVOLUME +/-
sMUTE
The tone control of the speakers or headphones can be
set separately. Set the headphone tone control with the
headphones connected.
PHONES
SILENT
CINEMA
TONE
CONTROL
STRAIGHT
TV
BD
DVD
CD
RADIO
INPUT PROGRAM
SCENE
INFO
MEMORY
PRESET
FM AM
TONE CONTROL
PROGRAM l / h
SW
C
L
SL SR
R
SW
C
L
SL SR
R
Treble 0.0dB
TONEVOL.
Adjustable range -10.0 dB to +10.0 dB
Adjustment
increments
2.0 dB
If you set the balance extremely off, sounds may not
match those from other channels well.
J1 : You can change the input source name displayed on the front
panel display as necessary (p. 46).
En 26
PLAYBACK
This unit has a SCENE function that allows you to turn the power on and change input sources and sound field programs with one key.
Four scenes are available for different uses, such as
playing movies or music. The following input sources
and sound field programs are provided as the initial
factory settings.
Registering input sources/sound
field program
1Use dInput selector to select the input
source you want to register.
2Use the gSound selection keys to select
the sound field program you want to
register.
3Press the hSCENE key until “SET
Complete” appears on the front panel
display.
This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. You can enjoy multi-channel playback for almost any sound source using various
sound field programs stored on the chip, and a range of sound decoders.
Selecting sound field programs and
sound decoders
This unit offers sound field settings (sound field
programs) in many different categories suitable for
movies, music and other uses. Choose a sound field
program that sounds best with the source you are playing
back, rather than relying on the name or explanation of
the program.
Selects sound field program:
MOVIE category: Press gMOVIE repeatedly
MUSIC category: Press gMUSIC repeatedly
Selects stereo reproduction:
Press gSTEREO repeatedly
Selects compressed music enhancer:
Press gSTEREO repeatedly
Selects surround decoder:
Press gSUR. DECODE repeatedly
Switches Straight decoding mode (p. 27):
Press gSTRAIGHT
Changing input settings with a single key (SCENE function)
dInput selector
gSound selection keys
gMOVIE
gMUSIC
gSTEREO
gSUR. DECODE
gSTRAIGHT
hSCENE
SCENE
ENHANCER SUR. DECODE
STRAIGHT
HDMI
AV
AUDIO
1234
1234
125
V-AUX
TUNER
MOVIE MUSIC
STEREO
BD
DVD TV
CD
RADIO
DOCK[ A ] [ B ]
7
8
5
6
9
0
10
1
2
3
4
R
EC
ENT
TV
TV V
O
L TV
CH
I
NPUT
M
U
TE
RECEIVER
O
PTI
ON
S
ET
UP
RETURN
VO
L
U
ME
TRAN
S
MIT
S
LEE
P
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MU
T
E
ENTER
T
O
P
MENU
PO
P-
UP
MENU
DI
S
PLAY
SOU
R
CE
CO
DE
S
ET
h
g
d
SCENE Input Sound field program
BD/DVD HDMI1 Straight
TV AV4 Straight
CD AV3 Straight
RADIO TUNER 5ch Enhancer When changing “SCENE,” you can also use switch
between the external components that the remote
control operates (p. 50).
SW
C
L
SL SR
R
SET Complete
SCENE1 VOL.
Release the key when “SET Complete” is displayed.
Enjoying sound field programs
Sound field programs are stored for each input source.
When you change the input source, the sound field
program previously selected for that input source is
applied again.
If the sampling frequency of an input source is higher
than 96 kHz, this unit does not apply any sound field
programs.
You can use the speaker indicators on the front panel
display to check what speakers are currently
outputting sound (p. 7).
You can adjust sound field elements (sound field
parameters) for each of the programs.
SW
C
L
SL SR
R
Sci-Fi
MOVIE VOL.
Sound field program categories
Program
En 27
PLAYBACK
Enjoying sound field programs
Enjoying unprocessed playback
(Straight decoding mode)
Use straight decoding mode when you want to playback
sound without sound field processing. You can playback
as follows in straight decoding mode.
2-channel sources such as CD
Stereo sound plays through the front left and right
speakers.
Multi-channel playback sources such as BD/
DVD
Plays back audio from a playback source without
applying sound field effects, using an appropriate
decoder to split the signal into multiple channels.
1Press gSTRAIGHT to activate the straight
decoding mode.
2Press gSTRAIGHT again to exit straight
decoding mode.
Enjoying stereo playback
Select “2ch Stereo” from the surround field programs
when you want to playback 2-channel stereo sound
(from the front speakers only), regardless of the
playback source.
Selecting “2ch Stereo” will playback as follows for the
playback of CD and BD/DVD sources.
2-channel sources such as CD
Stereo sound plays back through the front speakers.
Multi-channel sources such as BD/DVD
Playback channels other than the front channels in the
playback source are mixed with the front channels and
played back through the front speakers.
1Press gSTEREO repeatedly to select “2ch
Stereo.
2To deactivate stereo playback, press any of
the gSound selection keys to select a
sound field program other than “2ch
Stereo.
Enjoying sound field programs
without surround sound speakers
This unit allows you to use virtual surround speakers to
enjoy sound field surround effects, even without any
surround speakers (Virtual CINEMA DSP mode). You
can even enjoy surround sound presence with just a
minimal configuration of the front speakers only.
This unit will switch to Virtual CINEMA DSP mode
automatically when surround speakers are
unavailable. J1
Enjoying sound field programs
with headphones
Even when headphones are connected, you can enjoy the
reproduction sound field presence with ease (SILENT
CINEMA mode). J2
gSound selection keys
gSTRAIGHT
gSTEREO
ENHANCER SUR. DECODE
STRAIGHT
MOVIE MUSIC
STEREO
7
8
5
6
9
0
10
1
2
3
4
R
EC
ENT
TV
TV V
O
L TV
CH
I
NPUT
M
U
TE
RECEIVER
SC
ENE
O
PTI
ON
S
ET
UP
RETURN
VO
L
U
ME
H
DMI
AV
A
UDI
O
TRAN
S
MIT
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
BD
D
VD
TV
C
D
R
ADI
O
MU
T
E
ENTER
T
O
P
MENU
PO
P-
UP
MENU
DI
S
PLAY
SOU
R
CE
CO
DE
S
ET
D
OCK
[
A
]
[
B
]
g
SW
C
L
SL SR
R
Straight
VOL.
SW
C
L
SL SR
R
Sci-Fi
MOVIE VOL.
Previously selected program
SW
LR
2ch Stereo
STEREOVOL.
SW
C
L
SL SR
R
Hall in Vienna
MUSICVOL.
J1 : However, Virtual CINEMA DSP mode is not available in the
following conditions:
When headphones are connected to this unit.
When a “2ch Stereo” sound field program is selected.
When straight decoding mode is selected.
J2 : However, SILENT CINEMA mode is not available in the
following conditions:
When a “2ch Stereo” sound field program is selected.
When straight decoding mode is selected.
En 28
PLAYBACK
Enjoying sound field programs
Sound field programs
Category: MOVIE
Sound field programs optimized for viewing video sources such as movies, TV programs, and games.
Category: MUSIC
This sound field is suitable when listening to music sources such as CDs.
in the table indicates the sound field program for CINEMA DSP.
Standard This program creates a sound field emphasizing the surround feeling without disturbing the
original acoustic positioning of multi-channel audio such as Dolby Digital and DTS. It has
been designed with the concept of an ideal movie theater, in which the audience is
surrounded by beautiful reverberations from the left, right and rear.
Spectacle This program represents the spectacular feeling of large-scale movie productions. It
reproduces a broad theater sound field that matches cinemascope and wider-screen movies
with an excellent dynamic range providing everything from very small sound effects to
large, impressive sounds.
Sci-Fi This program clearly reproduces the finely elaborated sound design of the latest science
fiction and special effects-featuring movies. You can enjoy a variety of cinematographically
created virtual spaces reproduced with clear separation between dialog, sound effects and
background music.
Adventure This program is ideal for precisely reproducing the sound design of action and adventure
movies. The sound field restrains reverberations but puts emphasis on reproducing a
powerful space expanded widely to the left and right. The reproduced depth is also
restrained relatively to ensure the separation between audio channels and the clarity of the
sound.
Drama This sound field features stable reverberations that match a wide range of movie genres from
serious dramas to musicals and comedies. The reverberations are modest but offer an
optimum 3D feeling, reproducing effects tones and background music softly but cubically
around clear words and center positioning in a way that does not fatigue the listener even
after long hours of viewing.
Mono Movie This program is provided for reproducing monaural video sources such as a classic movie in
an atmosphere of a good old movie theater. The program produces the optimum expansion
and reverberation to the original audio to create a comfortable space with a certain sound
depth.
Sports This program allows the listeners to enjoy stereo sport broadcasts and studio variety
programs with enriched live feeling. In sports broadcasts, the voices of the commentator and
sportscaster are positioned clearly at the center while the atmosphere of the stadium expands
in an optimal space to offer the listeners a feeling of presence in the stadium.
Action Game This sound field is suitable for action games such as car racing and FPS games. It uses
reflection data that limits the effects range per channel in order to offer a powerful playing
environment that makes the listener feel as if they are right there by enhancing various
effects tones while maintaining a clear sense of directions.
Roleplaying Game This sound field is suitable for role-playing and adventure games. It combines the sound
field effects for movies and the sound field designs for “Action Game” to represent the depth
and 3D feeling of the field during play, while offering movie-like surround effects in the
movie scenes in the game.
Hall in Munich This sound field simulates a concert hall with approximately 2500 seats in Munich, using
stylish wood for the interior finishing as normal standards for European concert halls. Fine,
beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual
seat is at the center left of the arena.
Hall in Vienna This is an approximately 1700-seat, middle-sized concert hall with a shoebox shape that is
traditional in Vienna. Pillars and ornate carvings create extremely complex reflections from
all around the audience, producing a very full, rich sound.
Chamber This program creates a relatively wide space with a high ceiling like an audience hall in a
palace. It offers pleasant reverberations that are suitable for courtly music and chamber
music.
Cellar Club This program simulates a live house with a low ceiling and homey atmosphere. A realistic,
live sound field features powerful sound as if the listener is in a row in front of a small stage.
The Roxy Theatre This is the sound field of a rock music live house in Los Angeles, with approximately 460
seats. The listener’s virtual seat is at the center left of the hall.
The Bottom Line This is the sound field at stage front in The Bottom Line, a famous New York jazz club once.
The floor can seat 300 people to the left and right in a sound field offering real and vibrant
sound.
Music Video This sound field offers an image of a concert hall for live performance of pop, rock and jazz
music. The listener can indulge oneself in a hot live space thanks to the presence sound field
that emphasizes the vividness of vocals and solo play and the beat of rhythm instruments,
and to the surround sound field that reproduces the space of a big live hall.
En 29
PLAYBACK
Enjoying sound field programs
Category: STEREO
Suitable for listening to stereo sources.
Category: ENHNCR (Compressed music enhancer)
Suitable for listening to compressed audio, such as MP3.
Category: SUR.DEC (Surround decode mode)
Select this program to playback sources with selected decoders. You can playback 2-channel sources as
5.1-channel sound.
2ch Stereo Use this program to mix down multi-channel sources to 2 channels. When multi-channel
signals are input, they are down mixed to 2 channels and output from the front left and right
speakers.
5ch Stereo Use this program to output sound from all speakers. When you play back multi-channel
sources, this unit down-mixes the source to 2 channels, and then outputs the sound from all
speakers. This program creates a larger sound field and is ideal for background music at
parties, etc.
Straight Enhancer Use this program to restore the original depth and dynamics of 2-channel or multi-channel
to compression audio.
5ch Enhancer Use this program to play back compression artifacts in 5-channel stereo.
q Pro Logic A Dolby Pro Logic decoder. Suitable for any source.
q PLII Movie A Dolby Pro Logic II decoder. Suitable for viewing any movie.
q PLII Music A Dolby Pro Logic II decoder. Suitable for listening to music.
q PLII Game A Dolby Pro Logic II decoder. Suitable for playing games.
En 30
PLAYBACK
The FM/AM tuner of this unit provides the following
two modes for tuning.
Normal tuning
You can tune in to a desired FM/AM station by searching
or specifying its frequency.
Preset tuning (p. 31)
You can preset the frequencies of FM/AM stations by
registering them to specific numbers, and later just select
those numbers to tune in.
Selecting a frequency for reception
(Normal tuning)
1Press dTUNER to switch to the tuner input.
2Press eFM or eAM to select a band to
receive.
3Use eTUNING H / I to set a frequency to
receive.
eTUNING H
Increases the frequency. Press and hold this key for
longer than a second to search automatically for a station
on a higher frequency than the current one. J1
eTUNING I
Decreases the frequency. Press and hold this key for
longer than a second to search automatically for a station
on a lower frequency than the current one. J1
FM/AM tuning
dTUNER
eFM
eAM
eTUNING H / I
lNumeric keys
TUNER
FM AM
TUNING
7856
90
10
1234
ENT
R
E
C
TV
TV V
O
L TV
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
O
PTI
O
N
S
ET
UP
RETURN
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MI
T
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
I
NF
O
M
EM
O
RY
P
RE
S
ET
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
MU
T
E
E
NTER
TO
P
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
CO
DE
S
E
T
D
OC
K
[
A
]
[
B
]
l
d
e
When using the FM/AM tuner, adjust the direction of
the FM/AM antenna connected to this unit to get the
best reception.
SW
C
L
SL SR
R
FM 87.5 MHz
VOL.
STEREO
TUNED
SW
C
L
SL SR
R
FM98.5MHz
VOL.
Lights up when receiving
a broadcast from a station
Lights up when receiving
a stereo broadcast
Entering a frequency number
In normal tuning mode, use the lNumeric keys on
the remote control to enter a frequency. Leave the
decimal point out when entering a number. J2
For example, enter as follows to select a station on
98.5MHz.
9 8 5
J1 : When searching for a station, release the key once the search has
started.
J2 : “Wrong Station!” appears on the front panel display when you
enter a frequency that is out of receivable range. Make sure that
the frequency entered is correct.
En 31
PLAYBACK
FM/AM tuning
Registering and recalling a
frequency (Preset tuning)
You can register up to 40 FM/AM stations as preset
stations. There are two methods of presetting stations,
Auto Preset” and “Manual Preset.” Use one of these
methods to register stations.
Presetting FM stations
automatically (Auto Preset)
The tuner detects FM stations with strong signals and
registers up to 40 automatically.
1Press dTUNER to switch to the tuner input.
2Press qOPTION to display the Option
menu. J1
3Use jCursor B / C to select “Auto Preset.
4Press jENTER, then press ePRESET F /
G or jCursor B / C to choose the preset
number from which to start the Auto Preset
function.
Auto Preset will begin approximately 5 seconds after
you select a preset number.
If you do not select a preset number, Auto Preset will
begin approximately 5 seconds after “READY” is
displayed.
The Option menu closes automatically when presetting
is complete. J2
dTUNER
ePRESET F / G
jCursor B / C / D / E
jENTER
jRETURN
qOPTION
OPTION
RETURN
TUNER
PRESET
ENTER
7
8
5
6
9
0
10
1
2
3
4
R
E
C
ENT
TV
TV V
O
L TV
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
S
ET
UP
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MI
T
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
FM
I
NF
O
M
EM
O
RY
AM
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
MU
T
E
TO
P
MENU
PO
P-
UP
MENU
DI
S
PLA
Y
SOU
R
C
E
CO
DE
S
E
T
D
OC
K
[
A
]
[
B
]
q
j
e
d
When signal reception is poor
When you are receiving an FM broadcast and cannot
obtain a stable stereo broadcast, you can force this
unit to receive in a monaural mode.
1Press dTUNER to switch to the tuner
input.
2Press qOPTION to display the Option
menu. J1
3Use jCursor B / C to select “FM Mode.
4Press jENTER and use the jCursor D /
E to select “Mono.
5When setting is completed, press
qOPTION to close the Option menu.
To return this unit to its original settings, use the
same procedure to return the settings to “Stereo.
FMMode
OPTION VOL.
FMMode:Mono
985 VOL.
AM stations cannot be automatically registered. Use
manual station preset (p. 32).
SW
C
L
SL SR
R
Auto Preset
OPTION VOL.
To cancel registration, press jRETURN.
SW
C
L
SL SR
R
01:FM87.5MHz
READYVOL.
Selecting a preset number
Status Frequency
Preset number
SEARCH MEMORY
During Auto Preset
Search Preset for stations
SW
C
L
SL SR
R
Auto Preset
FINISH VOL.
When Auto Preset is complete
J1 : See the section on “Configuring the settings specific for each
input source (Option menu)” for details on the Option menu
(p. 37).
J2 : The preset with the lowest preset number will be selected
automatically immediately after presetting.
En 32
PLAYBACK
FM/AM tuning
Registering stations manually
(Manual Preset)
Select stations by hand and register them as presets
individually.
1Tune in to the station you wish to register,
referring to “Selecting a frequency for
reception (Normal tuning)” (p. 30).
2Use one of the following methods to
register the station you are currently
receiving.
Registering to a preset number to which no
station is registered
Press eMEMORY for 2 seconds or longer.
The station will be registered automatically to the lowest
open preset number (or the next number after the one
registered most recently).
Designating a preset number for
registration
Press eMEMORY once, to display “Manual Preset” on
the front panel display. After a small wait, the preset
number that the station has been registered to will
appear.
Press ePRESET F / G to select the preset to register
the station to, and then press eMEMORY to register.
Recalling a preset station
You can call preset stations registered by automatic
station preset or manual station preset. J1
To select a registered station, press ePRESET
F / G to select the preset number of the
station. J2
Clearing preset stations
1Press dTUNER to switch to the tuner input.
2Press qOPTION to display the Option
menu. J3
3Use jCursor B / C to display “Clear
Preset” and press jENTER.
4Use jCursor B / C to select the preset
number you want to clear, and press
jENTER to clear it.
5Press qOPTION to finish this operation.
dTUNER
eMEMORY
ePRESET F / G
jCursor B / C
jENTER
jRETURN
lNumeric keys
qOPTION
OPTION
RETURN
TUNER
MEMORY
PRESET
ENTER
7856
90
10
1234
ENT
R
E
C
TV
TV V
O
L TV
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
S
ET
UP
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MI
T
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
FM
I
NF
O
AM
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
MU
T
E
TO
P
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
CO
DE
S
E
T
D
OC
K
[
A
]
[
B
]
q
l
j
e
d
STEREO
TUNED
SW
C
L
SL SR
R
01:FM98.5MHz
MEMORY VOL.
Registered frequencies
To cancel registration, press jRETURN or do not
operate the remote control for about 30 seconds.
SW
C
L
SL SR
R
01:Empty
985
VOL.
Preset number
The newly registered frequency
Empty, or the frequency registered
most previously.
Blinks
Press jRETURN to cancel the operation.
Repeat this operation to clear the registration of
multiple numbers.
SW
C
L
SL SR
R
01:FM98.5MHz
CLEAR
VOL.
The number of the preset to be cleared
Blinks Registered frequencies
J1 : Preset numbers to which no stations are registered will be
skipped. “No Presets” or “No Presets in Memory” is displayed
when there are no stations are registered.
J2 : To select a station by selecting a preset number, use the
lNumeric keys to enter the preset number of the station you
wish listen to. When an invalid number is entered, “Wrong Num.
appears on the front panel display. Check that you have entered
the correct number.
J3 : See the section on “Configuring the settings specific for each
input source (Option menu)” for details on the Option menu
(p. 37).
En 33
PLAYBACK
Once you have connected a Yamaha iPod universal dock (such as the YDS-12, sold separately) to this unit, you can enjoy playback of your iPod/iPhone using the remote
control supplied with this unit. When playing back from an iPod/iPhone, you can also use the compressed music enhancer sound field programs (p. 29) to give
compressed audio formats such as MP3 a sharper, more dynamic sound.
Connecting the Yamaha iPod
universal dock
Use the dedicated cable to connect the dock to the
DOCK jack on the rear panel of this unit. Refer to the
operating instructions of the iPod universal dock for
information on how to connect your iPod/iPhone.
Switch the power on and place your iPod/iPhone in the
dock. The unit is now ready for playback.
Controlling an iPod/iPhone
After setting your iPod/iPhone in your dock, just press
dDOCK to switch to DOCK input and you can operate
your iPod/iPhone.
You can use the remote control of this unit to carry out
basic operations (playback, stop, skip etc) on your iPod/
iPhone. You can check song information on the iPod/
iPhone screen.
Playing back tunes from your iPod™/iPhone™
iPod touch, iPod (Click and Wheel including iPod classic), iPod nano, iPod mini, iPhone, iPhone 3G, and iPhone 3GS are supported (As of March 2010).
When connecting an iPhone, please use a YDS-12.
Some features may not be compatible depending on the model or the software version of your iPod.
Some functions may not be available for some Yamaha iPod universal dock models. This explanation focuses on the YDS-12.
dDOCK
jCursor B / C / D / E
jENTER
ks
ke
kp
kw
kf
k b
ka
ENTER
DOCK
7
8
5
6
9
0
10
1
2
3
4
RE
C
ENT
TV
T
V V
O
L
T
V
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
O
PTI
O
N
S
ET
UP
RETURN
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MI
T
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
M
U
T
E
TOP
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
CO
DE
S
E
T
[
A
]
[
B
]
k
j
d
CAUTION
To prevent accidents, place this unit in standby mode
before connecting an iPod universal dock.
CO
MP
ON
VIDE
O
P
R
P
B
Y
O
PTI
CA
AV
CO
MP
O
NENT
VIDE
O
M
ONITOR OUT
P
R
P
B
Y
HDMI
OUT
Yamaha iPod universal dock
SW
C
L
SL SR
R
iPodconnected
DOCK VOL.
dDOCK Switches to the DOCK (iPod) input.
jCursor B / CMove the cursor up and down to different
fields.
jCursor D / EReturns to the previous menu or enter the
menu you have selected.
jENTER Enters the selected menu.
k wSearches backwards while held down.
k fSearches forwards while held down.
k b
Skips to the beginning of the currently
playing song. Pressing repeatedly skips
one song backwards with each press.
k aSkips to the beginning of the next song.
k sStops playback.
k eSwitches between playback and pause.
k pSwitches between playback and pause.
En 34
PLAYBACK
Playing back tunes from your iPod™/iPhone™
dDOCK
jCursor B / C / D / E
jENTER
qOPTION
OPTION
ENTER
DOCK
7
8
5
6
9
0
10
1
2
3
4
R
E
C
ENT
TV
TV V
O
L TV
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
S
ET
UP
RETURN
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MI
T
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
MU
T
E
TO
P
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
CO
DE
S
E
T
[
A
]
[
B
]
q
j
d
To charge the iPod/iPhone when this unit
is in standby mode
If you connect an iPod/iPhone to the iPod universal
dock the iPod/iPhone will always charge when this
unit is turned on.
This unit can charge an iPod/iPhone even when in
standby mode (iPod Standby Charge function).
Check the iPod CHARGE indicator ( )
on the front panel display of this unit to check
whether this unit is charging an iPod/iPhone while in
standby mode. While charging an iPod/iPhone, the
iPod charge indicator lights. The indicator goes out
when charging is finished.
If necessary, you can also deactivate the iPod Standby
Charge function.
1Press dDOCK to switch to the DOCK
input.
2Press qOPTION to display the Option
menu.
3Use jCursor B / C to display “Standby
Charge” and press jENTER.
4Use jCursor D / E to switch the setting
to “Off.
5When setting is completed, press
qOPTION to close the Option menu.
To re-activate the Standby Charge function carry out
this procedure again and change the “Standby
Charge” setting back to “Auto.
iPod
CHARGE
SW
C
L
SL SR
R
Charge;;;;Auto
DOCK VOL.
En 35
PLAYBACK
Playing back tunes from Bluetooth™ components
You can connect a Yamaha Bluetooth wireless audio receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible
portable music players. J1
Connecting a Yamaha Bluetooth
wireless audio receiver
Use the dedicated cable to connect the dock to the
DOCK jack on the rear panel of this unit.
The Bluetooth wireless audio receiver connection will be
complete when this unit is turned on.
Pairing Bluetooth™ components
Be sure to carry out pairing when connecting a Bluetooth
component for the first time, or when settings have been
deleted.
Refer to the operating instructions of your Bluetooth
component as necessary when carrying out pairing.
1Press dDOCK to switch to the DOCK input.
2Turn on the Bluetooth component you want
to pair with and set it to pairing mode.
3Press qOPTION to display the Option menu
and use jCursor B / C to select “Pairing.
4Press jENTER to start pairing.
5Make sure the Bluetooth component
recognizes the Bluetooth wireless audio
receiver.
When the device is recognized it will appear in the
Bluetooth component list, for example as “YBA-10
YAMAHA.
6Select the Bluetooth wireless audio receiver
from the Bluetooth component list, and
enter a pass key “0000” into the Bluetooth
component.
Playing back tunes from Bluetooth™ components
NOTE
When playing back from a Bluetooth component for the first time, you must first pair the devices (register the Bluetooth components). When establishing a wireless connection
you must carry out pairing on both this unit and on the Bluetooth component.
dDOCK
eMEMORY
jCursor B / C
jENTER
jRETURN
qOPTION
OPTION
RETURN
MEMORY
ENTER
DOCK
7
8
5
6
9
0
10
1
2
3
4
RE
C
ENT
TV
T
V V
O
L
T
V
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
S
ET
UP
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MI
T
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
AM
P
RE
S
ET
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
M
U
T
E
TOP
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
CO
DE
S
E
T
[
A
]
[
B
]
q
j
e
d
CAUTION
To prevent accidents, place this unit in standby mode
before connecting a Bluetooth wireless audio receiver.
CO
MP
ON
VIDE
O
P
R
P
B
Y
O
PTI
CA
AV
CO
MP
O
NENT
VIDE
O
M
ONITOR OUT
P
R
P
B
Y
HDMI
OUT
Yamaha Bluetooth
wireless audio receiver
The Yamaha Bluetooth wireless audio receiver can be
paired with up to eight Bluetooth components. When
the ninth device is paired, the pairing settings for the
device which has not been used for the longest period
of time will be deleted.
SW
C
L
SL SR
R
Pairing
OPTION VOL.
To cancel pairing, press jRETURN.
You can also press and hold eMEMORY on the front
panel to begin pairing.
SW
C
L
SL SR
R
Searching...
DOCK VOL.
SW
C
L
SL SR
R
Completed
DOCK VOL.
When pairing occurs correctly
J1 : This unit supports A2DP (Advanced Audio Distribution Profile)
of the Bluetooth profile.
En 36
PLAYBACK
Playing back tunes from Bluetooth™ components
Using Bluetooth™ components
When pairing is complete, carry out the following
procedure to achieve a wireless connection between this
unit and the Bluetooth component. When the wireless
connection is complete, you playback from Bluetooth
components.
1Press dDOCK to switch to the DOCK input.
2Press qOPTION to display the Option
menu.
3Use jCursor B / C to select “Connect” and
press jENTER.J1
4Operate the Bluetooth component for
playback.
dDOCK
jCursor B / C
jENTER
qOPTION
OPTION
ENTER
DOCK
7
8
5
6
9
0
10
1
2
3
4
R
E
C
ENT
TV
TV V
O
L TV
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
S
ET
UP
RETURN
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MI
T
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
MU
T
E
TO
P
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
CO
DE
S
E
T
[
A
]
[
B
]
q
j
d
Depending on Bluetooth components, a wireless
connection is established automatically or by
operating the Bluetooth components. In that case, it is
not necessary to carry out the following procedure.
“Not found” is displayed when there is an error
connecting. Check that the following conditions have
been satisfied, and try to establish a wireless
connection again.
Both this unit and the Bluetooth component are paired.
The Bluetooth component is switched on.
The Bluetooth component is within 32 feet (10 meters)
of the Bluetooth wireless audio receiver.
To disconnect a wireless connection, repeat the same
steps, and in step 3, select “Disconnect.
SW
C
L
SL SR
R
BTconnected
DOCK VOL.
When wireless connection is complete
J1 : “Disconnect” is displayed when a Bluetooth component has been
connected.
En 37
SETUP
This receiver has a unique option menu specific for each type of input source, such as volume trim for compatible input sources, audio/video data display for signals from
external devices, and other frequently used menu items.
Option menu display and setup
1Use the dInput selector on the remote
control to select the Option menu you wish
to display.
2Press qOPTION.
The Option menu appears for the desired input source.
3Select the desired control/setup item using
jCursor B / C and press jENTER.
The displayed Option menu items differ depending on
the input source.
For details, read the following Option menu items
section.
4Select the desired menu item (or enable a
function) using jCursor B / C / D / E and
jENTER.
Parameters of the selected item are displayed. The
parameters you can set differ depending on the menu
items.
5To close the Option menu, press qOPTION.
Option menu items
The following menu items are provided for each input
source.
Adjusting volume between input
sources
Input source: All
Reduces any change in volume when switching between
input sources by correcting volume differences in each
input source. You can adjust this parameter for each
input source.
Configuring the settings specific for each input source (Option menu)
dInput selector
jCursor B / C / D / E
jENTER
jRETURN
qOPTION
OPTION
RETURN
HDMI
AV
AUDIO
1234
1234
125
V-AUX
TUNER
ENTER
DOCK[ A ] [ B ]
7
8
5
6
9
0
10
1
2
3
4
R
E
C
ENT
TV
TV V
O
L TV
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
S
ET
UP
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
TRAN
S
MI
T
S
LEE
P
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
MU
T
E
TO
P
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
CO
DE
S
E
T
q
j
d
You can also use jRETURN to return to the previous
screen or close the Option menu.
Certain selected menu items may automatically close
the Option menu when their functions are enabled.
SW
C
L
SL SR
R
VolumeTrim
OPTION VOL.
Option menu
For a few seconds after closing the Option menu, the
remote control keys may not function. If this occurs,
reselect the input source.
HDMI1-4 Vo l u m e
Trim
Audio In Signal Info
AV1-2 Vo l u m e
Trim
Audio In Signal Info
AV3-4 Vo l u m e
Trim
Signal Info
AV5 Vo l u m e
Trim
AUDIO1-2 Vo l u m e
Trim
V-AUX Vo l u m e
Trim
TUNER Vo l u m e
Trim
FM Mode Auto
Preset
Clear
Preset
iPod
(DOCK)
Vo l u m e
Trim
Standby
Charge
Bluetooth
(DOCK)
Vo l u m e
Trim
Connect/
Disconnect
Pairing
Volume Trim
Adjustable range -6.0 dB to 0.0 dB to +6.0 dB
Default setting 0.0 dB
Adjustment
increments
0.5 dB steps
En 38
SETUP
Configuring the settings specific for each input source (Option menu)
Combining HDMI/AV1-2 input source
video and audio
Input source: HDMI1-4, AV1-2
Combines video from HDMI or AV input sources with analog/
digital audio inputs in situations such as:
an external device is connected with an HDMI cable but cannot
transmit audio through HDMI
an external device with component video output and analog audio
output (such as certain game consoles) are connected to the
system
To change assignments, select an input source (HDMI1-4 or AV1-2)
as the video input first, and then select audio input jacks in this
menu.
Set as follows according on the desired combination of audio input
jacks.
Displaying information on audio/video
signals
Input source: HDMI1-4, AV1-4
Displays information on digital audio and video signals on the
front panel display. You can display the signal information by
pressing jENTER on the menu item and using jCursor B / C.
Audio information
Video information
Audio In
Audio inputs Settings method
Optical digital audio
input
Select AV1 or AV4. Connect the external component
audio cable to the optical jack for the selected input.
Coaxial digital audio
input
Select AV2 or AV3. Connect the external component
audio cable to the coaxial jack for the selected input.
Analog audio input Select one of AV5, AUDIO1, or AUDIO2. Connect
the external component audio cable to the audio jack
for the selected input.
For details of settings, refer to “Receiving audio from other input
sources” (p. 16) and “Component connections to analog audio
output devices” (p. 17).
To return audio inputs to their previous settings, display this item
again, and select the original input jack.
SW
C
L
SL SR
R
Audio;;;;;;AV1
HDMI1 VOL.
Assignable audio input jacks
Inputs that change the audio source
Signal Info
FORMAT Format of audio signals.
CHAN The number of input signal channels (front/surround/
LFE).
For example, if input signal channels are 3 front
channels, 2 surrounds and LFE, “3/2/0.1” is
displayed.
SAMPL The sampling frequency of analog-to-digital
conversion.
B RATE The bit rate of input signal per second.
V IN Format and resolution of video input signal.
V OUT Format and resolution of video output signal.
V.MSG
(appears only
when an error
has occurred)
Error messages about HDMI signals and components.
Error message
HDCP Error HDCP authentication failed.
Device Over The number of connected HDMI
components is over the limit.
SW
C
L
SL SR
R
DolbyD
FORMAT
VOL.
Menu item
Information
“No Signal” is displayed when no signals are being received,
and “---” is displayed if this unit cannot recognize the incoming
signal.
The bit rate may vary during playback.
En 39
SETUP
Configuring the settings specific for each input source (Option menu)
Changing FM mode (Stereo/Monaural)
Input source: TUNER
Sets this unit to automatically match FM broadcast frequencies in
stereo, or to convert the frequency to monaural (p. 31).
Automatically presetting FM radio
stations
Input source: TUNER
Automatically detects radio stations in the FM frequency and
registers them as preset stations (p. 31).
Clearing preset FM stations
Input source: TUNER
Clears the preset stations (p. 32).
Charging an iPod™/iPhone™ in standby
mode
Input source: iPod (DOCK)
Charges an iPod/iPhone stationed in the iPod universal dock while
the receiver is in standby mode (p. 34).
Bluetooth™ wireless connections
Input source: Bluetooth (DOCK)
Enables/disables the Bluetooth wireless connection (p. 36).
Select “Connect” to establish the wireless connection. Select
“Disconnect” to disable the wireless connection.
Pairing the Bluetooth™ wireless audio
receiver and your Bluetooth component
Input source: Bluetooth (DOCK)
Pairs your Bluetooth wireless device and this receiver (p. 35).
FM Mode
Auto Preset
Clear Preset
Standby Charge
Connect
Disconnect
Pairing
En 40
SETUP
You can configure various function settings of this unit using the Setup menu.
Setup menu display and settings
1Press iSETUP on the remote control.
2Use the jCursor B / C to select the desired
menu and press jENTER.
Setup menu categories
Ex: Sound Setup menu
3Use jCursor B / C to navigate the
submenus to find the desired setting and
press jENTER.
4When multiple items appear, use jCursor
B / C to select the desired item.
5Press jCursor D / E to change the setting.
You can change other items by repeating step 4 and 5.
6Press iSETUP to exit the Setup menu.
Setup menu items
Setup menu
Setting various functions (Setup menu)
iSETUP
jCursor B / C / D / E
jENTER
jRETURN
SETUP
RETURN
ENTER
7
8
5
6
9
0
10
1
2
3
4
R
E
C
ENT
TV
TV V
O
L TV
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
O
PTI
O
N
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MI
T
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
MU
T
E
TO
P
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
CO
DE
S
E
T
D
OC
K
[
A
]
[
B
]
j
i
Speaker Setup Manages settings for speakers.
Sound Setup Manages settings for audio output.
Func. Setup Manages settings to make receiver
operation easier, such as input source
labeling and auto-standby functions.
DSP Parameter Sets parameters for sound field programs.
Memory Guard Protects settings against accidental
alteration.
SW
C
L
SL SR
R
SpeakerSetup
SETUP VOL.
SW
C
L
SL SR
R
Lipsync
SOUNDVOL.
You can also use jRETURN to return to the
previous screen.
For a few seconds after closing the Setup menu, the
remote control keys may not function. If this occurs,
reselect the input source.
SW
C
L
SL SR
R
Audio;;;;;;Amp
HDMI VOL. Speaker Setup
Config Subwoofer
Front
Center
Sur. LR
Crossover
SWFR Phase
Extra Bass
Level
Distance
Equalizer
Test Tone
Sound Setup
Lipsync HDMI Auto
Auto
Manual
Adaptive DRC
D.Range
Max Volume
Init.Volume
HDMI Audio Out
Func. Setup
Input Rename
AutoPowerDown
Dimmer
DSP Parameter
Memory Guard
(speakers)
(unit and speakers)
(speakers and frequency
bands)
En 41
SETUP
Setting various functions (Setup menu)
Manages settings for speakers
Speaker Setup submenu
Manual speaker setup
Adjusts the output characteristics of the speakers based on
manually set parameters.
Subwoofer
Confirms the subwoofer.
Front
Selects the size (sound reproduction capacity) of the front
speakers. J2
Center
Selects the size of the center speakers.
Sur. LR
Selects the size of the surround speakers.
Config Manually manages speaker configuration, such as
speaker size (sound production capacity), and bass
audio processing.
Level Manually adjusts the volume of each speaker.
Distance Manually adjusts the output of each speaker based on
distance to the listening point.
Equalizer Selects an equalizer to adjust speaker output
characteristics.
Test Tone Generates test tones.
SW
C
L
SL SR
R
SpeakerSetup
SETUP VOL.
Config
In the Config submenu, you can select the speaker size
characteristic (Large or Small). Select the size (sound
reproduction capacity) that matches your speakers.
When speaker size is set to “Small,” low-frequency components
of the speakers that you configured are produced from the
subwoofer (or from the front speakers if there is no subwoofer).
Yes (Default) Select this when you have a subwoofer connected.
During playback, the subwoofer will produce audio
from the LFE (low-frequency effect) channel and bass
audio from other channels. J1
None Select this when you do not have a subwoofer
connected. The front speakers will produce audio
from the LFE (low-frequency effect) channel and bass
frequency audio from other channels.
Woofer diameter
16 cm or larger Large
16 cm or smaller Small
Small (Default) Select this for small speakers. The subwoofer will
produce front channel low-frequency
components. J3
Large Select this for large speakers. The front speakers will
produce all of the front channel frequency
components.
None Select this when there is no center speaker. The front
speakers will produce center channel audio.
Small (Default) Select this when a small center speaker is connected.
Large Select this when a large center speaker is connected.
None Select this when no surround speakers are connected.
The front speakers will produce surround channel
audio signals.
Small (Default) Select this when the surround speakers are small.
Large Select this when the surround speakers are large.
J1 : Enabling the “Extra Bass” setting allows both the subwoofer and the front
speakers to produce bass audio.
J2 : When “Subwoofer” is set to “None,” you can only choose “Large.” If the front
speaker setting is “Small” and you change “Subwoofer” to “None,” it will
automatically change to “Large.
J3 : Enabling the “Crossover” setting allows you to set the frequency components
of audio signals transmitted from the front speakers to the subwoofer.
En 42
SETUP
Setting various functions (Setup menu)
Crossover
Sets the lower limit of low-frequency component output from
speakers set to “Small.
Audio with a frequency below that limit will be produced from the
subwoofer or the front speakers. J1
SWFR Phase
Sets the phase of the subwoofer if the bass audio is lacking or
unclear.
Extra Bass
Allows the front channel low-frequency components to be
produced exclusively by the subwoofer, or by both the subwoofer
and the front speakers.
Controlling the volume of each speaker
Separately adjusts the volume of each speaker. Use jCursor B /
C to select the desired speaker and adjust the volume with
jCursor D / E.
Manually setting speaker distance
Adjusts the timing at which the speakers produce audio so that
sounds from the speakers reach the listening position at the same
time.
Selecting adjustment units
Use jCursor B / C to display “Unit,” and then use jCursor D
/ E to choose the units of length (feet or meters).
Setting distances for each speaker
Use jCursor B / C to display the speaker you want to configure,
and then use jCursor D / E to set the distance from the speaker
to your listening position.
40Hz 110Hz
60Hz 120Hz
80Hz (Default) 160Hz
90Hz 200Hz
100Hz
NRM (Default) Does not change the subwoofer phase.
REV Reverses the subwoofer phase.
On The subwoofer and the front speakers produce the
front channel low-frequency components.
Off (Default) Depending on the size of the front speakers, either the
front speakers or the subwoofer produce the front
channel low-frequency components.
When the “Subwoofer” is set to “None,” the “Extra Bass”
setting is disabled.
Level
FL Front speaker L
FR Front speaker R
CCenter speaker
SL Surround speaker L
SR Surround speaker R
SWFR Subwoofer
Adjustable range -10.0 dB to +10.0 dB
Default setting 0 dB (FL / FR / SWFR)
-1.0 dB (C / SL / SR)
Adjustment
increments
0.5 dB
Distance
Unit Selects the distance unit (feet or meters).
Front L Front speaker L
Front R Front speaker R
Center Center speaker
Sur. L Surround speaker L
Sur. R Surround speaker R
SWFR Subwoofer
Adjustable range 1.0 ft to 80.0 ft (0.30 m to 24.0 m)
Default setting 10.0 ft (3.00 m) (Front L/Front R/SWFR)
8.5 ft (2.60 m) (Center)
8.0 ft (2.40 m) (Sur. L/Sur. R)
Adjustment
increments
0.5 ft (0.10 m)
J1 : If your subwoofer has a volume control or a crossover frequency control, set
the crossover frequency to maximum and the volume to half (or slightly less).
En 43
SETUP
Setting various functions (Setup menu)
Adjusting sound quality with the equalizer
Adjusts sound quality and tune with a graphic equalizer.
EQ Select
Turns the graphic equalizer on or off. By selecting GEQ and
pressing jENTER, you can adjust the characteristics of the
graphic equalizer.
Generating test tones
Turns the test tone generator on or off.
Equalizer
GEQ (Default) Uses the graphic equalizer to adjust sound quality.
Off Does not activate the equalizer.
Adjusting the graphic equalizer
1When “EQ Select” is displayed, use jCursor D / E
to select “GEQ” and press jENTER.
2Check that “Channel” appears and use jCursor
D / E to select the speaker for which you want to
adjust the equalizer.
SW
C
L
SL SR
R
Channel;FRNT L
GEQVOL.
The speaker you are adjusting
3Press jCursor C repeatedly to select the
frequency you want to adjust, then use jCursor D
/ E to adjust the volume.
Raising volume: Press jCursor E.
Lowering volume: Press jCursor D.
4When you have finished making adjustments,
press iSETUP to close the Setup menu.
SW
C
L
SL SR
R
63Hz
GEQ
VOL.
Frequency band Setting the volume level for
the selected frequency
Frequency
range
63 Hz/160 Hz/400 Hz/1 kHz/2.5 kHz/6.3 kHz/
16 kHz
Adjustable
range
-6.0 dB to 0 dB to +6.0 dB
Default setting 0 dB
Adjustment
increments
0.5 dB
You can use jCursor B / C to select another frequency or
return to step 2. Repeat steps 2-3 to adjust the tone to your
liking.
Test Tone
Off (Default) Does not generate test tones.
On Generates test tones. While “On” is selected, test
tones are produced constantly.
You can use the test tone in a variety of circumstances. For
example, you can adjust the volume balance settings for each
speaker, or whenever you adjust the settings on the internal
graphic equalizer, you can listen to the actual effect while
operating this unit. Turn the test tone off when you have finished
making adjustments.
En 44
SETUP
Setting various functions (Setup menu)
Setting the audio output function of this
unit
Sound Setup submenu
Synchronizing audio/video output
Adjusts the delay between audio and video output (Lipsync
function).
HDMI Auto
When connecting to a TV via HDMI, automatically adjusts output
timing if the TV supports an automatic lipsync function.
Auto
Fine-adjust the audio output timing by entering the correction time
provided when “HDMI Auto” is set to “On.
Manual
Manually adjusts the correction time. Select this when the TV does
not support the automatic lipsync function or “HDMI Auto” is set
to “Off.
Auto-adjusting the sound level to make
even low volumes more audible
Adjusts the dynamic range in conjunction with the volume level
(from minimum to maximum). When you play audio at night or at
low volumes, it is a good idea to set parameter to “Auto. J1
When the auto function is enabled, it adjusts the dynamic range as
follows.
Lipsync Adjusts the delay between video and audio output.
Adaptive DRC Auto-adjusting the sound level to make even low
volumes more audible.
D.Range Selects the dynamic range adjustment method for
digital audio playback.
Max Volume Sets the maximum volume for this receiver.
Init.Volume Sets the initial volume for when this receiver is turned
on.
HDMI Audio Out Selects audio signals received through the HDMI
input jack.
SW
C
L
SL SR
R
SoundSetup
SETUP VOL.
Lipsync
Off (Default) Select this when the connected TV does not support
the automatic lipsync function or you do not wish to
use the automatic lipsync function. Set the correction
time in “Manual.
On Select this when the TV supports the automatic
lipsync function. Fine-adjust the correction time in
Auto.
Adjustable range 0 ms to 240 ms
Adjustment
increments
1 ms
Adjustable range 0 ms to 240 ms
Adjustment
increments
1 ms
Default setting 0 ms
Adaptive DRC
Auto Adjusts the dynamic range automatically.
Off (Default) Does not adjust the dynamic range automatically.
Auto
Off
Auto
Off
Input Level Input Level
Volume: low Volume: high
Output Level
Output Level
J1 : The Adaptive DRC setting is also effective when you use headphones.
En 45
SETUP
Setting various functions (Setup menu)
Auto-adjusting Dolby Digital and DTS
dynamic range
Selects the dynamic range adjustment method for audio bitstream
(Dolby Digital and DTS) playback.
Setting the maximum volume
Sets a maximum volume level so that the audio is not played too
loudly. The default setting of +16.5 dB produces the highest
volume.
Setting the startup volume
Sets the initial volume for when this receiver is turned on. When
this parameter is set to “Off,” the volume is set at the level when the
receiver last entered standby mode. J1
Changing the output destination of HDMI
input audio signals
Choose whether to playback audio from an external component
such as a BD/DVD player connected via HDMI through this unit or
through a TV.
D.Range
Max (Default) Produces audio without adjusting the dynamic range.
STD Sets the standard dynamic range suitable for home
use.
Min Sets the dynamic range at the lowest level for
playback. This is useful for low-volume audio.
Max Volume
Adjustable range -30.0 dB to +15.0 dB / +16.5 dB (Maximum volume)
Default setting +16.5 dB
Adjustment
increments
5.0 dB
Init.Volume
Adjustable range Off, Mute, -80 dB to +16.5 dB
Default setting Off
Adjustment
increments
0.5 dB
HDMI Audio Out
Amp (Default) Outputs audio through this unit only. When this
setting is selected, the external component outputs an
audio format compatible with this unit.
TV Outputs audio through a TV only. When this setting is
selected, the external component outputs an audio
format compatible with the TV. J2
Amp+TV Outputs audio from the TV and this unit. When this
setting is selected, the external component outputs an
audio format compatible with this unit and TV.
J1 : When you set the “Max Volume” at a lower level than “Init.Volume,” the “Max
Volume” setting has priority.
J2 : When “TV” is selected, the speakers of this unit do not output sound.
En 46
SETUP
Setting various functions (Setup menu)
Making the receiver easier to use
Func. Setup submenu
Changing input source names
Changes the input source names to be shown on the front
panel display.
You can change an input source name by choosing from
a list of templates, or make one of your own.
SETUP
RETURN
ENTER
7
8
5
6
9
0
10
1
2
3
4
R
EC
ENT
TV
TV V
O
L TV
CH
I
NPUT
M
U
TE
RECEIVER
SC
ENE
O
PTI
ON
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MIT
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VI
E
MUS
I
C
S
TERE
O
BD
D
VD
TV
C
D
R
ADI
O
MU
T
E
T
O
P
MENU
PO
P-
UP
MENU
DI
S
PLAY
SOU
R
CE
CO
DE
S
ET
D
OCK
[
A
]
[
B
]
j
i
iSETUP
jCursor B / C / D / E
jENTER
jRETURN
Input Rename Changes the input source names.
AutoPowerDown Goes into standby mode.
Dimmer Sets the Brightness of the front panel
display.
Input Rename
Selecting a template
1Select “Input Rename” from the Setup
menu and press jENTER.
2Select the input source that you want to
rename using jCursor B / C.
SW
C
L
SL SR
R
Func.Setup
SETUP VOL.
SW
C
L
SL SR
R
HDMI1
HDMI1 VOL.
Renaming the input source
3Use jCursor D / E to select a new name
from the following templates.
4Confirm the new display name by
pressing jRETURN. Press iSETUP to
exit the Setup menu.
To cancel a name change, select the original name
and then press jRETURN to exit renaming.
Entering an original name
1Select “Input Rename” from the Setup
menu and press jENTER.
2Select the input source that you want to
rename using jCursor B / C.
Blu-ray Satellite
DVD VCR
SetTopBox Tape
Game MD
TV PC
DVR iPod
CD HD DVD
CD-R (blank)
SW
C
L
SL SR
R
HDMI1
HDMI1 VOL.
Renaming the input source
3Press jENTER.
4Use jCursor B / C to select the
characters you wish to change, and use
jCursor D / E to enter those characters.
The following characters are available for input
source.
A to Z, a to z
0 to 9
Symbols (#, *, -, +, etc.)
Space
5Repeat step 4 until you have entered the
new input source name.
6Confirm the new display name by
pressing jENTER. Press iSETUP to
exit the Setup menu.
To cancel a name change, press jRETURN.
SW
C
L
SL SR
R
HDMI1
HDMI1 VOL.
Cursor
En 47
SETUP
Setting various functions (Setup menu)
Goes enter standby mode automatically
when you leave it without operating
If you do not operate this unit or use the remote control for an
extended period of time, it will automatically go into standby mode
(Auto Power Down function). This function’s default setting is
“Off.” When you wish to activate this function, set the amount of
time to pass before this unit will enter standby.
Setting the brightness of the front panel
display
Sets the brightness of the front panel display. Lowering the setting
dims the display.
Setting sound field program parameters
You can set the parameters for the sound field programs (p. 48).
Prohibiting setting changes
Prohibits setting changes to prevent careless changes being made
to the settings on Setup menu.
AutoPowerDown
Off (Default) Auto Power Down function is disabled.
4hours Goes into standby mode, when you have not operated
this unit for four hours.
8hours Goes into standby mode, when you have not operated
this unit for eight hours.
12hours Goes into standby mode, when you have not operated
this unit for twelve hours.
This unit starts a countdown of 30 seconds before entering the
standby mode. Pressing any key of the remote control during the
countdown cancels entering the standby mode and reset the
timer.
Dimmer
Adjustable range -4 to 0
Default setting 0
Off (Default) Settings are not protected.
On Prohibits changes to the settings on Setup menu until
it is returned to “Off.
While set to “On,” the unit displays “Memory
Guard!” when an attempt is made to change the
settings.
SW
C
L
SL SR
R
DSPParameter
SETUP VOL.
SW
C
L
SL SR
R
Memory Guard
SETUP VOL.
En 48
SETUP
Although the sound field programs would satisfy you as they are with the default parameters, you can arrange the effect by setting the sound field elements (parameters).
To adjust the sound effects suitable for acoustical conditions of audio/video sources or rooms, perform the following operations.
Setting sound field parameters
1Press iSETUP to display the Setup menu.
2Use jCursor B / C to select “DSP
Parameter” and press jENTER.
3Use jCursor D / E to choose the sound
field program you want to edit.
4Press jCursor B / C to select the
parameter that you want to change, and
press jCursor D / E to change the
parameter.
5Once you have completed editing, press
iSETUP to close the Setup menu.
CINEMA DSP parameters
Change the effect level (level of the sound field effect to
be added). You can adjust the level of the sound field
effect while checking the sound effect.
Setting sound field program parameters
iSETUP
jCursor B / C / D / E
jENTER
SETUP
ENTER
7
8
5
6
9
0
10
1
2
3
4
R
E
C
ENT
TV
TV V
O
L TV
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
O
PTI
O
N
RETURN
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MI
T
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
MU
T
E
TO
P
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
CO
DE
S
E
T
D
OC
K
[
A
]
[
B
]
j
i
SW
C
L
SL SR
R
DSPParameter
SETUP VOL.
SW
C
L
SL SR
R
Sci-Fi
DSPPRMVOL.
Sound field program to be edited
When there are multiple parameters in the sound field
program you are configuring, repeat step 4 as
necessary to change other parameters.
To initialize the sound field parameters
To set the parameters of the sound field program back
to default, press jCursor C repeatedly during
editing to select “Initialize” and press jCursor E.
When “Press Again >” is displayed, press jCursor
E again to initialize.
To cancel operations, press jCursor D when “Press
Again” appears and return to the original display.
SW
C
L
SL SR
R
DSPLevel;;0dB
DSPPRMVOL.
Sound field parameter Choices
SW
C
L
SL SR
R
Initialize
DSPPRMVOL.
DSP Level
Adjustable range -6 dB to 0 dB to +3 dB
Default setting 0 dB
Adjust “DSP Level” as follows:
The effect sound is too soft.
There are no differences between effects of the sound
field programs.
Increase the effect level.
The sound is dull.
The sound field effect is added too much.
Reduce the effect level.
En 49
SETUP
Setting sound field program parameters
Parameters usable in certain sound field
programs
2ch Stereo only
Automatically bypasses the DSP circuit and tone control circuit
depending on the condition of tone control etc., when an analog
sound source is played back. You can enjoy a higher quality sound.
5ch Stereo only
Adjusts the center channel volume. J1
Adjusts the volume of the surround L channel. J1
Adjusts the volume of the surround R channel. J1
Straight Enhancer/5ch Enhancer only
Adjusts the effect level of the compressed music enhancer mode.
Parameters usable in surround decoder
q PLII Music only
Adjusts the soundscape of the front sound field. Sends front left/
right channels sounds to the surround speakers as well as the front
speakers for a wraparound effect.
Spreads the center channel sound to the front left and right
speakers to suit your needs or preferences. Set this parameter to 0
for outputting the center sound from the center speaker only, or to 7
for outputting it from the front left/right speaker only.
Adjusts the difference in level between the front sound field and
the surround sound field. You can adjust the difference in level
created by the software being played back to obtain the preferred
sound balance.
The surround sound gets stronger as you make the value more
negative, and the front sound gets stronger as you make the value
more positive.
Direct
Auto (Default) Outputs sound by bypassing the DSP circuit and tone
control circuit when both tone controls of “Bass” and
“Treble” are set to 0dB.
Off Does not bypass the DSP circuit and tone control
circuit.
CT Level
Adjustable range 0 to 100%
Default setting 100%
SL Level
Adjustable range 0 to 100%
Default setting 100%
SR Level
Adjustable range 0 to 100%
Default setting 100%
EFCT LVL
High (Default) Standard effect.
Low Sets when the high-frequency signals of the source are
emphasized excessively.
Panorama
Off (Default) Disables the effect.
On Enables the effect.
CT Width
Adjustable range 0 to 7
Default setting 3
Dimension
Adjustable range -3 to STD to +3
Default setting STD (Standard)
J1 : Not displayed when speakers are set to be inactive.
En 50
SETUP
You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code).
The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.
Selecting input source connected to DVD
player
Selecting input source connected to CD
player
Keys connecting external
components
cSOURCE A
Switches an external component on and off.
jCursor, jENTER, jRETURN
Operates the menus of external components.
kDISPLAY
Switches an external component display.
kExternal component operation keys
Functions as a recording or playback key of an external
component, or a menu display key.
lNumeric keys
Functions as numeric keys of an external component.
mTV control keys J1
Default remote control code
settings
The following remote control codes are assigned to input
sources as factory default settings. For a complete list of
available remote control codes, please refer to “Remote
Control Code Search” in the CD-ROM.
Controlling other components with the remote control
cSOURCE A
dInput selector
iSETUP
jCursor B / C / D / E
jENTER
jRETURN
kExternal component
operation keys
kDISPLAY
lNumeric keys
mTV control keys
mINPUT
mMUTE
mTV VOL +/-
mTV CH +/-
mA
qOPTION
OPTION
SETUP
RETURN
HDMI
AV
AUDIO
1234
1234
125
V-AUX
TUNER
ENTER
7856
90
10
1234
REC
ENT
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
INPUT
MUTE
DOCK[ A ] [ B ]
RECEIVER
SC
ENE
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
TRAN
S
MI
T
S
LEE
P
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
MU
T
E
CO
DE
S
E
T
q
m
l
k
j
i
c
d
If you are unable to operate this unit after operating an
external component, press iSETUP or qOPTION
and then try operating the remote control again.
Playback/Stop
DVD player
CD player
Playback/Stop
DVD player
CD player
The remote control keys for controlling external
components are available only when the external
components have corresponding control keys.
mINPUT Switches video inputs of TV
mMUTE Mutes TV volume temporarily.
mTV VOL +/- Controls the volume of TV
mTV CH +/- Switches TV channels.
mATurns on and off TV
Input Category Manufacturer Remote
control code
HDMI1 Blu-ray
player/
recorder
Yamaha 2064
HDMI2 —— —
HDMI3 —— —
HDMI4 —— —
AV1 —— —
AV2 —— —
AV3 CD player Yamaha 5095
AV4 —— —
AV5 —— —
AUDIO1 —— —
AUDIO2 —— —
V-AUX —— —
A/B J2—— —
DOCK DOCK Yamaha 5089
TUNER Tuner Yamaha 5085
J1 : You can register remote control codes for external components to
dInput selector and remote control codes for TVs in mA
(mTV control keys).
To register a TV remote control code to dInput selector:
You can use the jCursor, lNumeric keys, and mTV
control keys to control a TV you have registered.
To register a remote control code for a device other than a TV to
dInput selector:
You can use the jCursor and lNumeric keys etc to control
external components, and the mTV control keys to control
TVs registered in mA.
J2 : Use A/B for external component operations only. Set these keys to
remote control codes if you want to perform external component
operations without linking to input source selection of this unit.
For example, it may be convenient to assign remote control codes
for devices such as TVs.
En 51
SETUP
Controlling other components with the remote control
Registering remote control codes
for external component operations
The following section describes how to register remote
control code using an example of the registration of the
remote control codes of a Yamaha BD player connected
to HDMI2 jack.
1Use “Remote Control Code Search” in the CD-
ROM to search the available remote control
codes from the category or manufacturer of
external components.
“2064” can be used for a Yamaha BD player.
2Press nCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
3Press dHDMI2 on the remote control to
switch the input source to HDMI2. J1
Perform the following steps to register the selected
input source here to the remote control code.
4Enter a remote control code “2064” using
lNumeric keys.J2
Once the remote control code is registered successfully
the remote control will blink twice.
5To switch between BD player linked to
scene selections, press hSCENE and at the
same time press dHDMI2 and hold it for
approximately 3 seconds.
Then you can operate the external components by
switching the input source to HDMI2, or selecting
HDMI2 in the registered scene.
Same steps for operating other external components,
press hSCENE and at the same time press the input
source key selected in step 3 and hold it for
approximately 3 seconds.
dHDMI2
hSCENE
lNumeric keys
mTV control keys
mA
nCODE SET
SCENE
2
BD
DVD TV
CD
RADIO
7856
90
10
1234
ENT
TV
TV VOL TV CH
CODE SET
INPUT
MUTE
R
E
C
RECEIVER
O
PTI
O
N
S
ET
UP
RETURN
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
MI
AV
A
UDI
O
TRAN
S
MI
T
S
LEE
P
1
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
MU
T
E
E
NTER
TO
P
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
D
OC
K
[
A
]
[
B
]
n
m
l
h
d
Perform each of the following steps within 1 minute.
Settings will be automatically stopped if more than 1
minute passes since the last operation. To reset, repeat
from step 2.
Remote control code of an external component cannot
be set from the name or model number of a unit. Use
Remote Control Code Search” in the CD-ROM to
search the available remote control codes from the
category or manufacturer of external components.
If multiple remote control codes exist, first set the first
code in the list, if it does not work then try the other
codes.
If the registration fails, repeat the step 2.
In case of an external component with multiple remote
control codes, the other remote control codes may be
supported. Repeat from step 2 with the other remote
control codes.
2 0 64
TRANSMIT
R
ECEIVE
R
HDMI
SLEE
P
SOU
R
CE
C
ODE SE
T
Registration successful: blinks twice
Registration failed: blinks 6 times
J1 : When you want to register a remote control code to the mTV
control keys, press mA (mTV control keys) in step 3.
J2 : When you want to register a remote control code to the mTV
control keys, enter the TV remote control code in step 4.
En 52
SETUP
Controlling other components with the remote control
Resetting all remote control codes
Resetting all remote control codes for external
components to the initial factory settings.
1Press nCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
2Press iSETUP on the remote control.
3Enter “9981” using lNumeric keys.
iSETUP
lNumeric keys
nCODE SET
SETUP
7856
90
10
1234
ENT
CODE SET
R
E
C
TV
TV V
O
L TV
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
O
PTI
O
N
RETURN
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MI
T
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
MU
T
E
E
NTER
TO
P
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
D
OC
K
[
A
]
[
B
]
n
l
i
Perform each of the following steps within 1 minute.
Settings will be automatically stopped if more than 1
minute passes since the last operation. To reset, repeat
from step 2.
TRANSMIT
RE
C
EIVER
HDMI
SLEE
P
SOU
R
CE
C
ODE SE
T
blinks twice
Once the remote control code is registered
successfully the remote control will blink twice.
If setup fails, repeat from step 1.
9 9 81
TRANSMIT
R
ECEIVE
R
HDMI
SLEE
P
SOU
R
CE
C
ODE SE
T
Registration successful: blinks twice
Registration failed: blinks 6 times
En 53
SETUP
The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.
Displaying/Setting the Advanced Setup
menu
1Set this unit to the standby mode.
2Press A while pressing and holding STRAIGHT on
the front panel.
Release the keys when “ADVANCED SETUP” is displayed on
the front panel display.
After approximately 3 seconds, the top menu items are displayed.
3Use PROGRAM to select the item to be set from the
following items.
In the Advanced Setup menu, you can set the following settings.
4Press STRAIGHT a few times to select the value you
wish to change.
5Switch this unit to the standby mode, and then
switch it on again.
The settings become effective and the unit is powered on. If
initialization is selected, it will be performed when the unit is
powered on again.
Setting the impedance of speakers
Changes the unit settings depending on the impedance of the
speakers connected. J1
Extended functionality that can be configured as needed (Advanced Setup menu)
PHONES
SILENT
CINEMA
TONE
CONTROL
STRAIGHT
TV
BD
DVD
CD
RADIO
INPUT PROGRAM
SCENE
INFO
MEMORY
PRESET
FM AM
STRAIGHT
A
PROGRAM l / h
SPIMP.-8MIN
SP IMP. Sets the impedance of speakers.
REMOTE ID Changes the remote control ID of a receiver.
INIT Initializes various settings for this unit.
6 MIN Select the impedance when 6Ω speakers are
connected.
8 MIN (Default) Select the impedance when speakers above 8Ω are
connected.
SPIMP.-8MIN
J1 : For detailed procedures of speaker impedance settings, refer to “Changing
speaker impedance” (p. 10).
En 54
SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
Avoiding crossing remote control
signals when using multiple
Yamaha receivers
The remote control of the unit can only receive signals
from a receiver which has an identical ID (remote
control ID). When using multiple Yamaha AV receivers,
you can set each remote control with a unique remote
control ID for its corresponding receiver.
On the contrary, if you are setting the same remote
control ID for all receivers, you can use one remote
control to operate 2 receivers.
Initializing various settings for this
unit
Initializes various settings stored in this unit and sets it
back to default.
Select the items to be initialized from the following.
iSETUP
lNumeric keys
nCODE SET
SETUP
7856
90
10
1234
ENT
CODE SET
R
E
C
TV
TV V
O
L TV
C
H
I
NPUT
M
U
T
E
RECEIVER
SC
ENE
O
PTI
O
N
RETURN
VO
L
U
ME
ENHAN
C
E
R
SU
R. DE
CO
DE
S
TRAI
G
HT
H
DMI
AV
A
UDI
O
TRAN
S
MI
T
S
LEE
P
1
2
3
4
1
2
3
4
1
2
5
V-A
U
X
TUNER
FM
I
NF
O
M
EM
O
RY
AM
P
RE
S
ET
T
U
NIN
G
MO
VIE M
US
I
C
S
TERE
O
B
D
D
VD TV
CD
RADI
O
MU
T
E
E
NTER
TO
P
MENU
PO
P-
UP
MENU
D
I
S
PLA
Y
SOU
R
C
E
D
OC
K
[
A
]
[
B
]
n
l
i
ID1 (Default) Receives the remote control signals set in
ID1.
ID2 Receives the remote control signals set in
ID2.
ID1 is set for both remote control and receiver by
default. To avoid crossing remote control, change the
remote control ID for both remote control and
receiver.
REMOTEID-ID1
To change the remote control ID
1Press nCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
2Press iSETUP on the remote control.
3Enter the desired remote control ID code.
To switch to ID1:
Enter “5019” using lNumeric keys.
To switch to ID2:
Enter “5020” using lNumeric keys.
Once the remote control code is registered
successfully the remote control will blink twice.
Perform each of the following steps within 1 minute.
Settings will be automatically stopped if more than
1 minute passes since the last operation. To reset,
repeat from step 1.
TRANSMIT
R
ECEIVE
R
HDMI
SLEE
P
SOU
R
CE
C
ODE SE
T
Registration successful: blinks twice
Registration failed: blinks 6 times
If setup fails, repeat from step 1.
Returns to ID1 after the remote control code is
initialized (p. 52).
DSP PARAM Initializes all parameters for the sound
field programs.
ALL Resets this unit to default factory settings.
CANCEL (Default) Does not initialize.
INIT-CANCEL
En 55
APPENDIX
Refer to the table below when this unit does not function properly.
If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service
center.
General
Troubleshooting
Problem Cause Remedy See
page
The power will not
turn on.
The protection circuitry operated
three times consecutively.
As a safety precaution, when the protection
circuitry operates three times consecutively,
the capability to turn on the power is
disabled. Please contact your nearest
Yamaha dealer or service center to request
repair.
The unit enters
standby mode soon
after the power is
turned on.
The power cable is not completely
inserted.
Connect the power cable properly to an AC
wall outlet.
The speaker impedance settings
are incorrect.
Set the speaker impedance to match your
speakers.
10
(When this unit is turned back on
and “CHECK SP WIRES!” is
displayed.) The protection
circuitry has been activated
because this unit was turned on
while a speaker cable was shorted.
Make sure that all speaker cables between
this unit and speakers are connected
properly.
12
This unit cannot be
turned off or does
not work properly.
The internal microcomputer is
hung-up due to an external electric
shock (such as lightning or
excessive static electricity) or by a
drop in power supply voltage.
Disconnect the power cable from the AC
wall outlet, wait about 30 seconds and then
plug it in again.
The batteries in the remote control
may have lost their charge.
Replace all batteries. 4
The unit enters
standby mode.
The protection circuitry has been
activated because of a short circuit,
etc.
Check that the speaker impedance settings
are correct.
10
After display of a
countdown on the
front panel, the unit
goes into standby
mode.
If you do not use take any action,
the Auto Power Down function
operates.
Turn on the unit, and play the source again.
In the Setup menu “AutoPowerDown”
(“Func. Setup” AutoPowerDown”),
increase the time until switching to standby
mode, or turn off the Auto Power Down
function.
47
“Internal Error” is
displayed on the
front panel display.
An internal error has occurred. Please contact authorized Yamaha dealer or
service center to request repair.
Sound/images
suddenly go off.
The protection circuitry has been
activated because of a short circuit,
etc.
Check that the speaker impedance settings
are correct.
10
Check that the speaker wires are not
touching each other, then turn the unit back
on.
The sleep timer has turned off the
unit.
Turn on the unit, and play the source again.
Problem Cause Remedy See
page
En 56
APPENDIX
Troubleshooting
No sound. Incorrect input or output cable
connections.
Connect the cables properly. If the problem
persists, the cables may be defective.
16
If a DVI-HDMI cable is used to
connect the unit with an external
component, then it is necessary to
use an audio input jack for a
different input to output audio.
Display the HDMI Input Option menu for
the connected cable, select “Audio In,” and
select the jack to use for audio input.
38
Speaker connections are not
secure.
Secure the connections. 12
The HDMI components connected
to the unit do not support the
HDCP copy protection standards.
Connect HDMI components that support the
HDCP copy protection standards.
38
The audio input into the device is
set to playback through the TV.
In the Setup menu, set the HDMI Audio Out
(“Sound Setup” “HDMI Audio Out”) to
other than “TV.
45
No appropriate input source has
been selected.
Select an appropriate input source with
dInput selector (on the remote control).
25
The volume is turned down or
muted.
Turn up the volume.
Signals that this unit cannot
reproduce are being input from a
source component, such as a CD-
ROM.
Use an input source that has signals that can
be reproduced on this unit.
No picture. A video jack (ex. Video input
HDMI output) type different to the
input video is being used to try to
display content on the TV.
Use video jacks of the same type (ex. Video
input Video output) to connect to the TV.
14
An appropriate video input is not
selected on the TV.
Select an appropriate video input on the TV.
Problem Cause Remedy See
page
No sound is output
from a specific
speaker.
The speaker is malfunctioning.
Check the Speaker indicators on
the front panel display. If the
corresponding indicator lights up,
connect another speaker and check
if sound is output.
If sound is not output, the unit may be
malfunctioning.
7
The playback component or
speakers are not connected
properly.
Connect the cables properly. If the problem
persists, the cables may be defective.
12, 16
Output from that speaker is
disabled.
Check the Speaker indicators on the front
panel display. If the corresponding indicator
is turned off, try the following.
1) Change to a different input source.
2) With the selected sound field program,
sound is not output from that speaker. Select
another sound field program.
3) “None” may have been selected for that
speaker on this unit. Display “Speaker
Setup” in the Setup menu, and set respective
parameters to enable output from that
speaker (“Speaker Setup” “Config”).
7, 41
The volume of that speaker is set
to the minimum in “Speaker
Setup” in the Setup menu.
Display “Speaker Setup” in the Setup menu
and adjust the volume (“Speaker Setup”
“Level”).
42
(If hardly any sound comes from
one channel)
Speaker output balance is not set
correctly.
Balance the volume of each speaker from
“Level” in the Setup menu (“Speaker Setup”
“Level”).
42
Sound may not be output from
certain channels, depending on the
input source or sound field
program.
Try another sound field program. 26
Only the center
speaker outputs
substantial sound.
When a monaural source sound
field program is applied, for some
surround decoders, sound from all
channels is output from the center
speaker.
Try another sound field program. 26
Problem Cause Remedy See
page
En 57
APPENDIX
Troubleshooting
HDMI™
No sound is heard
from the surround
speakers.
This unit is in straight decoding
mode and a monaural source is
being played back.
Press gSTRAIGHT (on the remote
control) to exit straight decoding mode.
27
Sound may not be output from
certain channels depending on
input sources or sound field
programs.
Try another sound field program. 26
No sound is heard
from the subwoofer.
A subwoofer is not connected, or it
is disabled.
Check that a subwoofer is connected
correctly, and from the Setup menu
“Subwoofer” (“Speaker Setup” “Config”
“Subwoofer”), set the subwoofer to
“On.
41
The subwoofer is turned off. Turn the subwoofer power on.
If the subwoofer includes an Auto Power
Off function, then lower the Auto Power Off
sensitivity settings.
The source does not contain LFE
(p. 61) or low frequency signals.
The right
combination of audio
/ video jacks to
connect cannot be
found.
Combine input connected to the
external component video output
with another input audio jack.
Select a desired input source (HDMI1-4 or
AV1-2) as a video input and select a audio
input source from “Audio In” in the Option
menu.
38
The audio input
sources cannot be
played in the desired
digital audio signal
format.
The connected component is not
set to output the desired digital
audio signals.
Set the playback component properly
referring to its instruction manual.
This unit does not support
playback of HD Audio (TrueHD,
Dolby Digital plus, DTS Master
Audio, etc.) or DTS 96/24, etc.
Signals, such as HD Audio and DTS 96/24,
can be played by standard decoders (Dolby
Digital, DTS Digital Surround, etc.).
There is noise
interference from
digital or radio
frequency
equipment.
This unit is too close to other
digital or radio frequency
equipment.
Move this unit further away from such
equipment.
Problem Cause Remedy See
page
Noise/hum noise is
heard.
Incorrect cable connection.
Connect the audio cables properly.
If the problem persists, the cables may be
defective.
A DTS-CD is being played back. If a DTS bitstream signal is not properly
input to this unit, only noise is output.
Connect the playback component to this
unit by digital connection and play back the
DTS-CD.
If the condition is not resolved, the problem
may result from the playback component.
Consult the manufacturer of the playback
component.
The volume cannot
be increased, or the
sound is distorted.
The component connected to the
output jacks of this unit is not
turned on.
When the component connected to the
output jacks of this unit is not turned on, the
sound may be distorted, or the volume may
decreased due to the nature of AV receivers.
Turn on all components connected to this
unit.
“Max Volume” is set to a low
value.
Set it to a higher value. 45
Problem Cause Remedy See
page
The front panel
display HDMI
indicator is flashing.
An error with the HDMI
connection has occurred.
Try re-inserting the HDMI cable.
Confirm that HDMI video that is not
supported by the unit is not being input
(HDMI Input Option menu “Signal
Info”).
38
No picture or sound. The number of components is over
the limit.
Disconnect some of the HDMI components.
The connected HDMI component
does not support high-bandwidth
digital copyright protection
(HDCP).
Connect an HDMI component that supports
HDCP.
Problem Cause Remedy See
page
En 58
APPENDIX
Troubleshooting
Tuner (FM/AM)
FM AM
Problem Cause Remedy See
page
FM stereo reception
is noisy.
You are too far from the station
transmitter, or the input from the
antenna is weak.
Check the antenna connections. 21
Switch to monaural mode. 31
Replace the outdoor antenna with a more
sensitive multi-element antenna.
There is distortion,
and clear reception
cannot be obtained
even with a good FM
antenna.
There is multi-path interference. Adjust the antenna height or orientation, or
place it in a different location.
The desired station
cannot be tuned into
with the automatic
tuning method.
You are in an area far from a
station, or input from the antenna
is weak.
Replace the outdoor antenna with a more
sensitive multi element antenna.
Use eTUNING H / I (on the remote
control) to manually select the station.
30
“No Presets” is
displayed.
No preset stations are registered. Register stations you wish to listen to as
preset stations before operation.
31
“Wrong Station” is
displayed.
An invalid FM/AM frequency has
been input.
Input a frequency that can be received.
Problem Cause Remedy See
page
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is weak, or the antenna
connections are loose.
Adjust the AM loop antenna orientation. 21
Use the manual tuning method. 30
Automatic station
preset does not
work.
Automatic station preset is not
available for AM stations.
Use manual station preset. 32
Continuous
crackling and
hissing noises are
heard.
The supplied AM loop antenna is
not connected.
Connect the AM loop antenna correctly
even if you use an outdoor antenna.
21
The noises may be caused by
lightning, fluorescent lamps,
motors, thermostats, or other
electrical equipment.
It is difficult to completely eliminate noise,
but it can be reduced by installing and
properly grounding an outdoor AM antenna.
21
Buzzing and whining
noises are heard.
A TV set is being used nearby. Move this unit away from the TV set.
En 59
APPENDIX
Troubleshooting
Remote control iPod™/iPhone™
Problem Cause Remedy See
page
The remote control
does not work or
function properly.
Wrong distance or angle. The remote control will function within a
maximum range of 20 ft / 6 m, and no more
than 30 degrees off-axis from the front
panel.
Direct sunlight or lighting (from
an inverter type of fluorescent
lamp, strobe light, etc.) is striking
the remote control sensor of this
unit.
Adjust the lighting angle, or reposition this
unit.
The batteries are weak. Replace all batteries. 4
The remote control ID of the
remote control and this unit do not
match.
Match the remote control ID of this unit and
the remote control.
54
External components
cannot be controlled
using the remote
control.
The remote control code is not
correctly set.
Set the remote control code correctly using
Remote control code search” on the CD-
ROM.
Try setting another code for the same
manufacturer using “Remote control code
search” on the CD-ROM.
If this unit does not work when you press
jCursor B / C / D / E (on the remote
control), do the following.
When the key does not work during DVD
disc menu operation: press the dInput
selector (on the remote control) again.
When the key does not work during Option
menu/Setup menu operation: press the key
corresponding to the current menu operation
again.
Even if the remote control code is correctly
set, there are some models that do not
respond to the remote control.
Display Cause Remedy See
page
Loading... The unit is in the process of
recognizing the connection with
your iPod/iPhone.
The unit is in the middle of
acquiring song lists from your
iPod/iPhone.
Connect error There is a problem with the signal
path from your iPod/iPhone to the
unit.
Turn off the unit and reconnect the Yamaha
iPod universal dock to the DOCK jack of
the unit.
33
Remove your iPod/iPhone from the Yamaha
iPod universal dock and then place it back in
the dock.
33
Unknown iPod The iPod/iPhone being used is not
supported by the unit.
Connect an iPod/iPhone supported by the
unit.
iPod connected Your iPod/iPhone is properly
placed in the Yamaha iPod
universal dock.
Disconnected Your iPod/iPhone is removed from
the Yamaha iPod universal dock.
Unable to play The unit cannot play back the
songs currently stored on your
iPod/iPhone.
Check that songs are currently stored on
your iPod/iPhone.
En 60
APPENDIX
Troubleshooting
Bluetooth™
Display Cause Remedy See
page
Searching... The Yamaha Bluetooth wireless
audio receiver and the Bluetooth
component are in the process of
pairing.
The Yamaha Bluetooth wireless
audio receiver and the Bluetooth
component are in the process of
establishing a connection.
Completed The pairing is completed.
Canceled The pairing is canceled.
BT connected The connection between the
Yamaha Bluetooth wireless audio
receiver and the Bluetooth
component is established.
Disconnected The Bluetooth component is
disconnected from the Yamaha
Bluetooth wireless audio receiver.
Not found The Bluetooth component is not
found.
During pairing:
pairing must be performed on the
Bluetooth component and this unit
simultaneously. Check if the Bluetooth
component is in pairing mode.
During connecting:
check if the Bluetooth component is
turned on.
check if the Bluetooth component is
within 32 feet (10 m) of the Yamaha
Bluetooth wireless audio receiver.
En 61
APPENDIX
Audio information
Audio and video synchronization (lip sync)
Lip sync, an abbreviation for lip synchronization, is a technical term that
involves both a problem, and the capability of maintaining audio and video
signals synchronized during post-production and transmission.
Whereas the audio and video latency requires complex end-user
adjustment, HDMI version 1.3 incorporates an automatic audio and video
syncing capability that allows devices to perform this synchronization
automatically and accurately without user interaction.
Dolby Digital
Dolby Digital is a digital surround sound system that gives you completely
independent multi-channel audio. With 3 front channels (front L/R and
center), and 2 surround stereo channels, Dolby Digital provides 5 full-range
audio channels. With an additional channel especially for bass effects,
referred to as LFE (Low-Frequency Effect), the system has a total of 5.1-
channels (LFE is counted as 0.1 channel). By using 2-channel stereo for the
surround speakers, more accurate moving sound effects and surround sound
environments are possible than with Dolby Surround. The wide dynamic
range from maximum to minimum volumes that are reproduced by the 5
full-range channels, and the precise sound orientation generated using
digital sound processing provides listeners with unprecedented excitement
and realism. With this unit, any sound environment from monaural up to a
5.1-channel configuration can be freely selected for your enjoyment.
Dolby Pro Logic II
Dolby Pro Logic II is an improved technique used to decode vast numbers
of existing Dolby Surround sources. This new technology enables a discrete
5-channel playback with 2 front left and right channels, 1 center channel,
and 2 surround left and right channels, instead of only 1 surround channel
for conventional Pro Logic technology. There are three modes available:
“Music mode” for music sources, “Movie mode” for movie sources, and
“Game mode” for game sources.
Dolby Surround
Dolby Surround uses a 4-channel analog recording system to reproduce
realistic and dynamic sound effects: 2 front left and right channels (stereo),
a center channel for dialog (monaural), and a surround channel for special
sound effects (monaural). The surround channel reproduces sound within a
narrow frequency range. Dolby Surround is widely used with nearly all
video tapes and laser discs, as well as in many TV and cable broadcasts.
The Dolby Pro Logic decoder built into this unit employs a digital signal
processing system that automatically stabilizes the volume on each channel
to enhance moving sound effects and directionality.
DTS Digital Surround
DTS Digital Surround was developed to replace the analog soundtracks of
movies with a 5.1-channel digital sound track, and is now rapidly gaining
popularity in movie theaters around the world. DTS, Inc. has developed a
home theater system so that you can enjoy the depth of sound and natural
spatial representation of DTS Digital Surround in your home. This system
produces practically distortion-free 5.1-channel sound (technically, left,
right and center channels, 2 surround channels, plus an LFE 0.1 channel as
a subwoofer, for a total of 5.1-channels).
DSD
Direct Stream Digital (DSD) technology stores audio signals on digital
storage media, such as Super Audio CDs. Using DSD, signals are stored as
single bit values at a high-frequency sampling rate of 2.8224 MHz, while
noise shaping and oversampling are used to reduce distortion, a common
occurrence with very high quantization of audio signals. Due to the high
sampling rate, better audio quality can be achieved than that offered by the
PCM format used for normal audio CDs. The frequency is equal to or
higher than 100 kHz, with a dynamic range of 120 dB. This unit can
transmit or receive DSD signals via the HDMI jack.
LFE 0.1 channel
This channel reproduces low-frequency bass signals, and has a frequency
range from 20 Hz to 120 Hz. This channel is counted as 0.1, because it only
enforces a low-frequency range compared to the full-range reproduced by
the other 5 channels in Dolby Digital or DTS 5.1-channel systems.
PCM (Linear PCM)
Linear PCM is a signal format under which an analog audio signal is
digitized, recorded and transmitted without using any compression. This is
used as a method of recording CDs and DVD audio. The PCM system uses
a technique for sampling the size of the analog signal per very small unit of
time. Standing for “Pulse Code Modulation,” the analog signal is encoded
as pulses and then modulated for recording.
Sampling frequency and number of quantized bits
When digitizing an analog audio signal, the number of times the signal is
sampled per second is called the sampling frequency, while the degree of
accuracy when converting the sound level into a numeric value is called the
number of quantized bits. The range of rates that can be played back is
determined based on the sampling rate, whereas the dynamic range
representing the sound level difference is determined by the number of
quantized bits. In principle, the higher the sampling frequency, the wider
the range of frequencies that can be played back, and the higher the number
of quantized bits, the more accurately the sound level can be reproduced.
Sound field program information
CINEMA DSP
Since the Dolby Surround and DTS systems were originally designed for
use in movie theaters, their effect is best felt in a theater having many
speakers designed for acoustic effects. Since home conditions, such as
room size, wall material, number of speakers, and so on, can differ so
widely, it is inevitable that there are differences in the sound that is heard.
Based on a wealth of actually measured data, Yamaha CINEMA DSP uses
Yamaha’s original DSP technology to combine Dolby Pro Logic, Dolby
Digital, and DTS systems to provide the audiovisual experience of a movie
theater in the listening room of your own home.
Compressed music enhancer
The Compressed music enhancer feature of this unit enhances your
listening experience by regenerating the missing harmonics in compression
artifacts. As a result, it compensates for flattened complexity due to the loss
of high-frequency fidelity as well as lack of bass due to the loss of low-
frequency bass, providing improved performance for the overall sound
system.
Glossary
En 62
APPENDIX
Glossary
SILENT CINEMA
Yamaha has developed a natural, realistic sound effect DSP algorithm for
headphones. Parameters for headphones have been set for each sound field
program, so that accurate representations of all the sound field programs
can be enjoyed on headphones.
Virtual CINEMA DSP
Yamaha has developed a Virtual CINEMA DSP algorithm that allows you
to enjoy DSP surround effects even without any surround speakers, by
using virtual surround speakers. It is even possible to enjoy Virtual
CINEMA DSP using a minimal two-speaker system that does not include a
center speaker.
Video information
Component video signal
With the component video signal system, the video signal is separated into
the Y signal for luminance and the PB and PR signals for chrominance.
Color can be reproduced more faithfully with this system because each of
these signals is independent. The component signal is also called the “color
difference signal” because the luminance signal is subtracted from the color
signal. A monitor with component input jacks is required in order to output
component signals.
Composite video signal
With the composite video signal system, the video signal comprises the
three basic elements of a video picture: color, brightness and
synchronization data. A composite video jack on a video component
transmits these three elements combined.
Deep Color
Deep Color refers to the use of various color depths in displays, up from the
24-bit depths in previous versions of the HDMI specification. This extra bit
depth allows HDTVs and other displays increase from millions of colors to
billions of colors and eliminate on-screen color banding for smooth tonal
transitions and subtle gradations between colors. The increased contrast
ratio can represent many times more shades of gray between black and
white. Additionally, Deep Color increases the number of available colors
within the boundaries defined by the RGB or YCbCr color space.
HDMI
HDMI (High-Definition Multimedia Interface) is the first industry
supported, uncompressed, all-digital audio/video interface. Providing an
interface between any sources (such as set-top boxes or AV receivers) and
audio/video monitors (such as digital TV), HDMI supports standard,
enhanced or high-definition video as well as multichannel digital audio
using a single cable. HDMI transmits all ATSC HDTV standards and
supports 8-channel digital audio, with bandwidth to spare to accommodate
future enhancements and requirements.
When used in combination with HDCP (High-bandwidth Digital Content
Protection), HDMI provides a secure audio/video interface that meets the
security requirements of content providers and system operators. For
further information on HDMI, visit the HDMI website at “http://
www.hdmi.org/.
“x.v.Color”
A color space standard supported by HDMI version 1.3. It is a more
extensive color space than sRGB, and allows the expression of colors that
were not hitherto possible. While remaining compatible with the color
gamut of sRGB standards, “x.v.Color” expands the color space, and can
thus produce more vivid, natural images. It is particularly effective for still
pictures and computer graphics.
En 63
APPENDIX
HDMI signal compatibility
Audio signals
If the input source component can decode the bitstream audio signals of audio commentaries, you can play back the audio
sources with the audio commentaries mixed down by using the digital audio input (optical or coaxial) connections.
Refer to the supplied instruction manuals of the input source component, and set the component appropriately. Video signals
This unit is compatible with the video signals of the following resolutions:
Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are
registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. ©1996-2008 DTS,
Inc. All Rights Reserved.
iPod™, iPhone™
“iPod” is a trademark of Apple Inc., registered in the U.S. and other countries. “iPhone” is a trademark
of Apple Inc.
Bluetooth™
Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a
license agreement.
“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered
trademarks of HDMI Licensing LLC.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
Information on HDMI™
Audio signal types Audio signal formats Compatible media
2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc.
Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD,
etc.
DSD 2/5.1ch, 2.8224 MHz, 1 bit SACD, etc.
Bitstream Dolby Digital, DTS DVD-Video, etc.
NOTES
When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output,
depending on the type of the DVD player.
This unit is not compatible with HDCP-incompatible HDMI or DVI components.
Refer to the supplied instruction manuals for details.
To decode audio bitstream signals on this unit, set the input source component appropriately so that the
component outputs the bitstream audio signals directly (does not decode the bitstream signals on the
component).
This unit is not compatible with the audio commentary features (for example, the special audio contents
downloaded via Internet) of Blu-ray Disc or HD DVD. This unit does not play back the audio
commentaries of the Blu-ray Disc or HD DVD content.
480i/60 Hz
576i/50 Hz
480p/60 Hz
576p/50 Hz
720p/60 Hz, 50 Hz
1080i/60 Hz, 50 Hz
1080p/60 Hz, 50 Hz, 24 Hz
About trademarks
En 64
APPENDIX
HDMI specification
Deep Color
• x.v.Color
Auto Lip sync
INPUT/OUTPUT
Input jacks
HDMI input x 4
AV input x 5
[Audio] Digital input (optical) x 2, digital input (coaxial) x 2,
analog input x 1
[Video] Component video jacks x 2, video jacks x 3
AUDIO input x 2
[Audio] Analog jack x 2
VIDEO AUX input x 1
[Audio] Analog x 1, stereo mini jack x 1
[Video] Video jack x 1
DOCK input x 1
Output jacks
TV output (monitor output) x 3
[Audio/Video] HDMI x 1
[Video] Component video jack x 1, video jack x 1
AV output x 2
[Audio] Analog jack x 1
[Video] Video jack x 1
AUDIO output x 1
[Audio] Analog jack x 1
AUDIO SECTION
Surround Decoder
Dolby Digital, Dolby Pro Logic, Dolby Pro Logic II
DTS Digital Surround
DSD
Minimum RMS Output Power for Front, Center, Surround
[U.S.A. and Canada models]
(1 kHz, 0.9% THD, 8 Ω)
FRONT L/R........................................................................100 W/ch
CENTER .................................................................................100 W
SURROUND L/R...............................................................100 W/ch
[Other models]
(1 kHz, 0.9% THD, 6 Ω)
FRONT L/R........................................................................100 W/ch
CENTER .................................................................................100 W
SURROUND L/R...............................................................100 W/ch
Dynamic Power (IHF)
[U.S.A. and Canada models]
Front Speakers 8/6/4/2 Ω.................................. 110/130/160/180 W
[Other models]
Front Speakers 6/4/2 Ω............................................ 105/130/150 W
Maximum Useful Output Power (JEITA)
[China, Korea, General and Asia models]
1 kHz, 10% THD, 6 Ω............................................................135 W
Maximum Output Power [U.K., Europe and Asia models]
1 kHz, 0.7% THD, 4 Ω...........................................................120 W
IEC Output Power [U.K., Europe and Asia models]
Front Speakers 1 kHz, 0.9% THD, 8 Ω.........................95 W+95 W
Dynamic Headroom [U.S.A. and Canada models]
8 Ω.........................................................................................0.23 dB
Input Sensitivity/Input Impedance
AV5, etc..................................................................... 200 mV/47 kΩ
Maximum Input Voltage
AV5, etc. (1 kHz, 0.5% THD) ..................................... 2.3 V or more
Rated Output Voltage/Output Impedance
AUDIO OUT............................................................ 200 mV/1.2 kΩ
SUBWOOFER (2ch Stereo & Front: Small) ............... 1.0 V/1.2 kΩ
Headphone Jack Rated Output/Impedance
AV5, etc. (1 kHz, 50 mV, 8 Ω) .................................. 100 mV/470 Ω
Frequency Response
AV5 to FRONT .....................................10 Hz to 100 kHz, +0/-3 dB
Total Harmonic Distortion
AV 5 , e t c . t o F RO N T
[U.S.A. and Canada models] (1 kHz, 50 W, 8 Ω)........ 0.06% or less
[Other models] (1 kHz, 50 W, 6 Ω) ............................. 0.06% or less
Signal to Noise Ratio (IHF-A Network)
AV5, etc. Input Shorted (250 mV to Front Speakers)
................................................................................. 98 dB or more
Residual Noise (IHF-A Network)
Front Speakers ........................................................... 150 µV or less
Channel Separation (1 kHz/10 kHz)
AV5, etc. (5.1 kΩ shortened) ...........................60 dB/45 dB or more
Volume Control ...................................... MUTE / -80 dB to +16.5 dB
Tone Control (Front Speakers)
BASS Boost/Cut ............................................ ±10 dB/2 dB at 50 Hz
BASS Turnover Frequency .................................................... 350 Hz
TREBLE Boost/Cut ..................................... ±10 dB/2 dB at 20 kHz
TREBLE Turnover Frequency.............................................. 3.5 kHz
Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround)....................................... 12 dB/oct.
L.P.F. (Subwoofer) ............................................................ 24 dB/oct.
VIDEO SECTION
Video Signal Type
[U.S.A., Canada, Korea and General models] ........................ NTSC
[Other models] ............................................................................PAL
Signal Level
Composite ..................................................................... 1 Vp-p/75 Ω
Component.......................1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR)
Maximum Input Level (Video Conversion Off) .......1.5 Vp-p or more
Signal to Noise Ratio.................................................... 50 dB or more
Frequency Response [MONITOR OUT]
Component (Video Conversion Off)............5 Hz to 60 MHz, ±3 dB
Specifications
En 65
APPENDIX
FM SECTION
Tuning Range
[U.S.A. and Canada models] ...............................87.5 to 107.9 MHz
[Asia and General models] ........... 87.5/87.50 to 108.0/108.00 MHz
[Other models].................................................87.50 to 108.00 MHz
50 dB Quieting Sensitivity (IHF)
Mono..................................................................... 3.0 µV (20.8 dBf)
Signal to Noise Ratio (IHF)
Mono/Stereo ................................................................. 74 dB/69 dB
Harmonic Distortion (1 kHz)
Mono/Stereo ....................................................................... 0.3/0.3%
Antenna Input (unbalanced).........................................................75 Ω
AM SECTION
Tuning Range
[U.S.A. and Canada models]...................................530 to 1710 kHz
[Asia and General models]..................... 530/531 to 1710/1611 kHz
[Other models] ........................................................531 to 1611 kHz
GENERAL
Power Supply
[U.S.A. and Canada models].................................. AC 120 V, 60 Hz
[General models]......................... AC 110-120/220-240 V, 50/60 Hz
[China model].........................................................AC 220 V, 50 Hz
[Korea model] ........................................................AC 220 V, 60 Hz
[Australia model] ................................................... AC 240 V, 50 Hz
[U.K. and Europe models] ..................................... AC 230 V, 50 Hz
[Asia models] ............................................ AC 220-240 V, 50/60 Hz
Power Consumption
[U.S.A. and Canada models] .....................................250 W/320 VA
[Other models] ........................................................................250 W
Standby Power Consumption
[General models] ..........................................................1.0 W or less
[Other models] ..............................................................0.5 W or less
Dimensions (W x H x D)
435 x 151 x 315 mm (17-1/8 x 6 x 12-3/8 in)
• Weight
7.5 kg (16.5 lbs)
* Specifications are subject to change without notice.
A
Advanced Setup menu ................................................................. 53
AM tuning .................................................................................... 30
Antenna connection ..................................................................... 21
B
Bluetooth™ component playback................................................ 35
C
Cable plug .................................................................................... 13
Connections.................................................................................... 9
E
External device connection .......................................................... 13
F
FM tuning..................................................................................... 30
Front panel ..................................................................................... 5
Front panel display......................................................................... 7
I
iPod™/iPhone™ playback.......................................................... 33
J
Jack.............................................................................................. 13
O
Option menu................................................................................ 37
R
Rear panel...................................................................................... 6
Remote control, Controlling other components.......................... 50
Remote control, Part names and functions.................................... 8
S
SCENE function.......................................................................... 26
Setup menu.................................................................................. 40
Sound field program.................................................................... 26
Sound field program parameter setting ....................................... 48
Speaker connection ....................................................................... 9
Speaker setting ............................................................................ 22
Supplied accessories...................................................................... 4
Index
© 2010 Yamaha Corporation All rights reserved. YC434B0/OMEN1
- 1 -
List of remote control codes
Liste des codes de commande
Lista de códigos de mando a distancia
TV
A.R. Systems 0320
Acme 0342
Acura 0323, 0343
ADC 0337
Admiral 0054, 0178, 0336,
0337, 0339, 0346,
0347
Advent 0158
Adventura 0057
Adyson 0277, 0282, 0342
Agashi 0277, 0282
Agazi 0337
Aiko 0277, 0282, 0320,
0323, 0342, 0343
Aim 0320
Aiwa 0078, 0379
Akai 0050, 0055, 0109,
0159, 0181, 0277,
0282, 0320, 0323,
0340, 0343, 0349,
0350
Akiba 0320, 0340
Akura 0320, 0323, 0337,
0340
Alaron 0277
Alba 0161, 0277, 0320,
0323, 0340, 0342,
0343, 0344, 0349,
0351, 0372, 0382
Albatron 0140
Alcyon 0171
Alleron 0059
Allorgan 0282
Allstar 0320, 0350
America Action 0179
AMOi 0276
Amplivision 0161, 0282, 0321,
0342
Amstrad 0320, 0323, 0337,
0340, 0343
Amtron 0058
Anam 0179, 0343
Anam National 0052, 0058
Anglo 0323, 0343
Anitech 0171, 0320, 0323,
0337, 0343
Ansonic 0161, 0168, 0320,
0323, 0341, 0343
AOC 0008, 0026, 0050,
0053
Apex 0039, 0111, 0217
Arcam 0277, 0282
Arcam Delta 0342
Aristona 0320, 0349, 0350
Arthur Martin 0321
ASA 0339, 0347
Asberg 0171, 0320, 0350
Astra 0343
Asuka 0277, 0282, 0337,
0340, 0342
Atlantic 0277, 0320, 0342,
0349, 0350
Atori 0323, 0343
Auchan 0321
Audiosonic 0161, 0282, 0320,
0340, 0342, 0343,
0349, 0350
AudioTon 0161, 0282, 0342
Audiovox 0058, 0179, 0194
Ausind 0171
Autovox 0171, 0282, 0337,
0339, 0342
Aventura 0051
Awa 0277, 0282
Axion 0156
Baird 0282
Bang & Olufsen 0180, 0339
Basic Line 0282, 0320, 0323,
0340, 0343, 0350
Bastide 0282, 0342
Baur 0320, 0349
Bazin 0282
Beko 0161, 0269, 0294,
0302, 0311, 0320,
0328, 0351
Belcor 0008
Bell & Howell 0019, 0054
Benq 0097, 0242, 0361
Beon 0320, 0349, 0350
Best 0161
Bestar 0161, 0320, 0350
Binatone 0282, 0342
Blue Sky 0320, 0340
Blue Star 0348
Boots 0282, 0342
BPL 0320, 0348
Bradford 0058, 0179
Brandt 0322, 0345
Brillian 0182
Brinkmann 0320
Brionvega 0320, 0339, 0349,
0350
Britannia 0277, 0282, 0342
Brockwood 0008
Broksonic 0109, 0179
Bruns 0339
BTC 0340
Bush 0269, 0282, 0283,
0304, 0320, 0323,
0328, 0332, 0340,
0343, 0344, 0346,
0348, 0349, 0350,
0372, 0382, 0463,
0470, 0472
Candle 0008, 0026, 0050,
0057
Capsonic 0337
Carena 0320
Carnivale 0050
Carrefour 0344
Carver 0010
Cascade 0320, 0323, 0343
Casio 0367
Cathay 0320, 0349, 0350
CCE 0183, 0282
Celebrity 0055, 0107
Celera 0039
Centurion 0320, 0349, 0350
Century 0339
CGE 0161, 0171
Changhong 0039
Chimei 0273
Cimline 0323, 0343
Citizen 0007, 0008, 0026,
0050, 0058
City 0323, 0343
Clarion 0179
Clarivox 0349
Clatronic 0161, 0171, 0282,
0320, 0323, 0337,
0340, 0342, 0343,
0350, 0351
CMS 0277
CMS Hightec 0282
Coby 0197
Colortyme 0008, 0026
Commercial Solutions
0021
Concerto 0008, 0026
Concorde 0323, 0343
Condor 0161, 0277, 0320,
0323, 0342, 0350,
0351
Contec 0179, 0277, 0323,
0342, 0343, 0344
Contec/Cony 0012, 0058
Continental Edison
0345
Cosmel 0323, 0343
Craig 0058, 0179
Crosley 0010, 0037, 0171,
0339
Crown 0058, 0161, 0171,
0179, 0320, 0323,
0343, 0349, 0350,
0351
CS Electronics 0277, 0340, 0342
CTC Clatronic 0341
CTX 0205
Curtis Mathes 0007, 0008, 0010,
0019, 0021, 0026,
0049, 0050, 0178
CXC 0058, 0179
Cybertron 0340
Cytron 0152
Daewoo 0007, 0008, 0026,
0037, 0053, 0167,
0266, 0275, 0277,
0282, 0315, 0320,
0323, 0331, 0335,
0342, 0343, 0350,
0381, 0465
Dainichi 0277, 0340
Dansai 0277, 0282, 0320,
0337, 0349, 0350
Dantax 0161, 0349
Dawa 0320
Daytron 0007, 0008, 0026,
0323, 0343
De Graaf 0346
Decca 0282, 0320, 0342,
0349, 0350
Dell 0145, 0245
Denver 0358, 0362
Desmet 0320, 0349, 0350
Diamant 0320
Diamond 0277
DiamondVision 0135, 0143
Dimensia 0049
Disney 0219
Dixi 0282, 0320, 0323,
0343, 0349, 0350
Dream Vision 0461, 0498
DTS 0323, 0343
Dual 0282, 0320, 0342
Dual-Tec 0342, 0343
Dumont 0008, 0030, 0062,
0282, 0339, 0341,
0342
Durabrand 0031, 0051, 0179,
0215
Dux 0349
Dwin 0178
Dynatron 0320, 0349, 0350
Dynex 0228, 0231
Elbe 0161, 0168, 0282,
0320
Elcit 0339
Electa 0348
ELECTRO TECH
0343
Electroband 0055, 0107
Electrograph 0176
Electrohome 0008, 0026, 0052,
0055
Element 0230
Elin 0277, 0320, 0323,
0342, 0349, 0350
Elite 0320, 0340, 0350
Elman 0341
Elta 0277, 0323, 0343
Emerson 0000, 0007, 0008,
0012, 0013, 0019,
0026, 0031, 0037,
0051, 0058, 0059,
0161, 0179, 0320,
0339
Emprex 0154
Envision 0008, 0026, 0050
Epson 0155, 0206, 0359
Erres 0320, 0349, 0350
ESA 0051
ESC 0282
Etron 0343
Eurofeel 0282
Euro-Feel 0337
Euroline 0349
Euroman 0161, 0277, 0282
Euromann 0320, 0337, 0342,
0350
Europhon 0277, 0282, 0320,
0341, 0342, 0350
Expert 0321
Exquisit 0320
Fenner 0323, 0343
Ferguson 0322, 0345, 0349
Fidelity 0277, 0320, 0342,
0346
Filsai 0282
Finlandia 0346
Finlux 0171, 0282, 0320,
0339, 0341, 0342,
0349, 0350
FIRST LINE 0342, 0343, 0350
Firstline 0277, 0282, 0320,
0323
Fisher 0019, 0161, 0282,
0339, 0342, 0344,
0351
Flint 0320, 0350
Formenti 0171, 0277, 0336,
0339, 0342, 0349
Formenti/Phoenix
0277
Fortress 0336, 0339
Fraba 0161, 0320
Friac 0161
Frontech 0282, 0323, 0337,
0343, 0346, 0347
Fujitsu 0059, 0069, 0074,
0075, 0282
Fujitsu General 0282
Fujitsu Siemens 0504, 0505, 0507,
0510, 0511
Funai 0051, 0058, 0059,
0112, 0113, 0115,
0118, 0119, 0179,
0337
Futuretech 0058, 0179
Galaxi 0320, 0351
Galaxis 0161, 0320
Gateway 0176, 0177, 0241
GBC 0323, 0343, 0344
GE 0008, 0021, 0023,
0026, 0027, 0031,
0034, 0049, 0052,
0056, 0209
Geant Casino 0321
GEC 0282, 0320, 0342,
0347, 0349, 0350
Geloso 0323, 0343, 0346
General Technic 0323, 0343
Genexxa 0320, 0340, 0347,
0350
GFM 0128, 0227
Giant 0282
- 2 -
Gibralter 0008, 0030, 0050,
0062
GoldHand 0277
Goldline 0320
GoldStar 0007, 0008, 0012,
0026, 0031, 0050,
0053, 0161, 0277,
0282, 0320, 0323,
0342, 0343, 0346,
0349, 0350
Goodmans 0246, 0272, 0282,
0320, 0323, 0337,
0343, 0344, 0349,
0350, 0462, 0473,
0477
Gorenje 0161, 0351
GPM 0340
GPX 0129
Gradiente 0240
Graetz 0347
Granada 0171, 0282, 0320,
0321, 0342, 0344,
0346, 0349, 0350
Grandin 0340, 0343, 0348,
0349
Gronic 0282
Grundig 0160, 0161, 0171,
0310, 0320
Grunpy 0058, 0059, 0179
Haier 0157, 0233
Halifax 0277, 0282, 0337,
0342
Hallmark 0008, 0026, 0031
Hampton 0277, 0282, 0342
Hanseatic 0161, 0168, 0282,
0320, 0323, 0342,
0343, 0344, 0349,
0350
Hantarex 0320, 0323, 0343
Hantor 0320
Harman/Kardon 0010
Harvard 0058, 0179
Harwood 0320, 0323
Havermy 0178
HCM 0282, 0320, 0323,
0337, 0342, 0343,
0348
Hema 0282, 0323
Hewlett Packard 0192
Higashi 0277
HiLine 0320
Hinari 0320, 0323, 0340,
0343, 0344, 0349,
0350
Hisawa 0321, 0340, 0348
Hisense 0247
Hitachi 0008, 0012, 0026,
0066, 0084, 0092,
0093, 0120, 0172,
0173, 0255, 0270,
0271, 0282, 0320,
0335, 0338, 0342,
0344, 0346, 0347,
0365, 0382, 0448,
0456, 0467
Hornyphon 0320, 0350
Hoshai 0340
Huanyu 0277, 0342
Hygashi 0277, 0282, 0342
Hyper 0277, 0282, 0323,
0342, 0343
Hypson 0282, 0320, 0321,
0337, 0342, 0348,
0349, 0350
Hyundai 0141
Iberia 0320
ICE 0277, 0282, 0320,
0323, 0337, 0340,
0342, 0343, 0350
ICeS 0277
Ilo 0148, 0153
IMA 0058
Imperial 0161, 0171, 0320,
0347, 0350, 0351
Indiana 0320, 0349, 0350
Infinity 0010
InFocus 0250, 0327, 0363,
0479, 0508
Ingelen 0347
Ingersol 0323, 0343
Initial 0153
Inno Hit 0171, 0282, 0320,
0323, 0340, 0342,
0343, 0349, 0350
Innovation 0337, 0343
Insignia 0131, 0228, 0236,
0238
Inteq 0030
Interactive 0161
Interbuy 0323, 0343
Interfunk 0161, 0320, 0339,
0347, 0349, 0350
International 0277
Intervision 0161, 0282, 0320,
0337, 0341, 0342
Irradio 0171, 0320, 0323,
0340, 0343, 0349,
0350
Isukai 0320, 0340
ITC 0282, 0342
ITS 0277, 0320, 0340,
0348, 0350
ITT 0343, 0347
ITV 0320, 0343, 0349
Janeil 0057
JBL 0010
JC Penney 0007, 0008, 0026,
0027, 0049, 0053,
0056
JCB 0055, 0107
Jensen 0008, 0026
JVC 0012, 0014, 0015,
0056, 0064, 0065,
0067, 0169, 0174,
0297, 0314, 0344,
0350, 0375
Kaisui 0277, 0282, 0320,
0323, 0340, 0342,
0343, 0348
Kamosonic 0342
Kamp 0277, 0342
Kapsch 0347
Karcher 0161, 0320, 0342,
0343, 0349
Kawasho 0008, 0026, 0055,
0277
KEC 0179
Kendo 0161, 0320, 0341,
0346
Kenwood 0008, 0026, 0050
KIC 0282
Kingsley 0277, 0342
KLH 0039
Kloss Novabeam
0057, 0058
Kneissel 0161, 0168, 0320
Kolster 0320, 0350
Konka 0340
Korpel 0320, 0349, 0350
Korting 0161, 0339
Kosmos 0320
Koyoda 0343
KTV 0007, 0050, 0058,
0179, 0183, 0282,
0342
Kyoto 0277, 0282
Lasat 0161
Lenco 0323, 0343
Lenoir 0323, 0342, 0343
Leyco 0320, 0337, 0349,
0350
LG 0031, 0053, 0066,
0116, 0117, 0140,
0161, 0164, 0175,
0195, 0269, 0277,
0282, 0300, 0309,
0317, 0320, 0323,
0328, 0342, 0343,
0346, 0349, 0350,
0366, 0368, 0377,
0466, 0471, 0478
LG/GoldStar 0164
Liesenk 0349
Liesenkotter 0320
Life 0337, 0343
Lifetec 0320, 0323, 0337,
0343
Lloyds 0323
Loewe 0161, 0168, 0265,
0320, 0330, 0352
Loewe Opta 0339, 0349, 0350
Logik 0054
Luma 0320, 0323, 0346,
0349
Lumatron 0282, 0320, 0346,
0349, 0350
Lux May 0350
Luxman 0008, 0026
Luxor 0282, 0342, 0346
LXI 0010, 0019, 0021,
0026, 0027, 0031,
0049, 0111
M Electronic 0342, 0343, 0345,
0347, 0349, 0350
MAG 0096
Magnadyne 0339, 0341, 0349
Magnafon 0171, 0277, 0341,
0342
Magnavox 0008, 0009, 0010,
0013, 0026, 0032,
0033, 0048, 0050,
0128, 0211, 0212,
0224, 0226, 0239
Magnum 0337, 0343
Majestic 0054
Mandor 0337
Manesth 0282, 0320, 0337,
0342, 0349, 0350
Marantz 0008, 0010, 0026,
0050, 0204, 0320,
0349, 0350
Marelli 0339
Mark 0277, 0282, 0320,
0323, 0349, 0350
Masuda 0282
Matsui 0282, 0320, 0323,
0342, 0343, 0344,
0346, 0349, 0350,
0455
Matsushita 0017
Maxent 0147, 0176
Mediator 0320, 0349, 0350
Medion 0320, 0337, 0343
Megapower 0140
Megatron 0026, 0031
MElectronic 0277, 0282, 0320,
0323
Melvox 0321
Memorex 0019, 0026, 0031,
0053, 0054, 0137,
0215, 0323, 0343
Memphis 0323, 0343
Mercury 0320, 0323
Metz 0339
MGA 0008, 0026, 0031,
0050, 0053
Micromaxx 0337, 0343
Microstar 0337, 0343
Midland 0007, 0021, 0023,
0027, 0030, 0056,
0062
Minerva 0171
Minoka 0320, 0350
Mintek 0153
Mitsubishi 0008, 0026, 0031,
0053, 0066, 0084,
0093, 0098, 0150,
0178, 0289, 0320,
0339, 0344, 0350,
0376
Mivar 0161, 0168, 0171,
0277, 0282, 0342
Monivision 0140
Montgomery Ward
0054
Motion 0171
Motorola 0052, 0178
MTC 0008, 0026, 0050,
0053, 0161, 0277
Multi System 0349
Multitech 0058, 0161, 0179,
0183, 0277, 0282,
0320, 0323, 0341,
0342, 0343, 0344,
0346, 0349
Murphy 0277, 0342
NAD 0026, 0031, 0111
Naonis 0346
NEC 0008, 0026, 0050,
0052, 0053, 0072,
0103, 0282, 0344
Neckermann 0161, 0282, 0320,
0339, 0342, 0346,
0349, 0350, 0351
NEI 0320, 0349, 0350
Net-TV 0176
Neufunk 0320, 0323
New Tech 0343, 0350
New World 0340
NewTech 0282, 0320, 0323
Nicamagic 0277, 0342
Nikkai 0277, 0282, 0320,
0323, 0337, 0340,
0342, 0349, 0350
Nikko 0026, 0031, 0050
Nobliko 0171, 0277, 0341,
0342
Nokia 0347
Norcent 0201
Nordic 0282
Nordmende 0339, 0345, 0347,
0350
Nordvision 0349
Novatronic 0320
Oceanic 0321, 0347
Okano 0161, 0320, 0351
Olevia 0102, 0199, 0200,
0207, 0222
ONCEAS 0342
Onwa 0058, 0179
Opera 0320
Oppo 0130
Optimus 0017, 0019
Optoma 0144
Optonica 0178
Orbit 0320, 0350
Orion 0043, 0146, 0283,
0320, 0323, 0328,
0343, 0349, 0350
Orline 0320
Osaki 0282, 0320, 0337,
0340, 0342
Oso 0340
Otto Versand 0282, 0320, 0336,
0342, 0344, 0348,
0349, 0350
Pael 0277, 0342
Palladium 0161, 0282, 0320,
0342, 0351
Palsonic 0282
Panama 0277, 0282, 0320,
0323, 0337, 0342,
0343
Panasonic 0016, 0017, 0020,
0022, 0023, 0035,
0052, 0056, 0084,
0085, 0133, 0163,
0193, 0284, 0286,
0290, 0292, 0320,
0325, 0347, 0356
Panavision 0320
Pathe Cinema 0161, 0168, 0277,
0321, 0342
Pausa 0323, 0343
Penney 0021, 0023, 0031,
0050, 0111
Perdio 0277, 0320
Perfekt 0320
Philco 0008, 0009, 0010,
0012, 0026, 0050,
0052, 0053, 0161,
0171, 0320, 0339
Philharmonic 0282, 0342
Philips 0008, 0009, 0010,
0011, 0012, 0032,
0048, 0049, 0052,
0122, 0128, 0134,
0186, 0187, 0213,
0221, 0224, 0226,
0239, 0256, 0257,
0259, 0261, 0263,
0267, 0280, 0281,
0287, 0296, 0299,
0301, 0303, 0305,
0313, 0319, 0320,
0324, 0333, 0339,
- 3 -
0342, 0349, 0350,
0353, 0357, 0360,
0380, 0383, 0452,
0459, 0460
Philips Magnavox
0011, 0032, 0033
Phoenix 0161, 0277, 0320,
0339, 0349, 0350
Phonola 0277, 0320, 0339,
0349, 0350
Pilot 0007, 0008, 0050
Pioneer 0008, 0026, 0094,
0095, 0161, 0320,
0345, 0347, 0349,
0350, 0458
Plantron 0320, 0323, 0337,
0350
Playsonic 0282
Polaroid 0039, 0142, 0202,
0234
Poppy 0323, 0343
Portland 0007, 0008, 0026,
0053
Prandoni-Prince
0171, 0346
Precision 0282, 0342
Prima 0157, 0243, 0323,
0343, 0347
Princeton 0140
Prism 0023, 0056
Profex 0323, 0343
Profi-Tronic 0320, 0350
Proline 0320, 0350
Proscan 0021, 0027, 0049
Prosonic 0161, 0277, 0282,
0320, 0342, 0349
Protech 0282, 0337, 0341,
0342, 0343, 0349,
0350
Proton 0008, 0012, 0026,
0031
Protron 0196
PROVIEW 0096, 0246
Provision 0320, 0349
Pulsar 0008, 0030, 0062
Pye 0256, 0320, 0349,
0350, 0378
Pymi 0323, 0343
Quandra Vision 0321
Quasar 0017, 0023, 0052,
0056
Quelle 0282, 0320, 0337,
0342, 0349, 0350
Questa 0344
Radialva 0320
RadioShack 0019, 0021, 0031,
0050, 0179, 0320
RadioShack/Realistic
0007, 0008, 0012,
0026, 0049, 0058
Radiola 0282, 0320, 0349,
0350
Radiomarelli 0320, 0339
Radiotone 0161, 0320, 0323,
0350
Rank 0344
RCA 0008, 0021, 0024,
0025, 0026, 0027,
0042, 0049, 0052,
0053, 0063, 0136,
0225
Realistic 0019, 0031, 0050,
0179
Recor 0320
Redstar 0320
Reflex 0320
Revox 0161, 0320, 0349,
0350
Rex 0337, 0346, 0347
RFT 0161, 0168, 0339
Rhapsody 0277
R-Line 0320, 0349, 0350
Roadstar 0323, 0337, 0340,
0343
Robotron 0339
Rowa 0277, 0282
Royal Lux 0161
RTF 0339
Runco 0030, 0050, 0062
Saba 0298, 0322, 0339,
0345, 0347
Saisho 0282, 0323, 0337,
0342, 0343
Salora 0346, 0347
Sambers 0171, 0341
Sampo 0007, 0008, 0026,
0050, 0176
Samsung 0004, 0005, 0006,
0007, 0008, 0012,
0026, 0031, 0036,
0050, 0053, 0076,
0077, 0079, 0114,
0124, 0125, 0126,
0127, 0139, 0161,
0183, 0185, 0190,
0191, 0258, 0264,
0277, 0282, 0320,
0323, 0334, 0337,
0342, 0343, 0349,
0350, 0351, 0373,
0453, 0468
Sandra 0277, 0282, 0342
Sansui 0043, 0109, 0320,
0350
Sanyo 0008, 0019, 0068,
0070, 0071, 0099,
0161, 0168, 0223,
0237, 0277, 0282,
0288, 0295, 0323,
0342, 0344, 0369,
0469
SBR 0320, 0349
Sceptre 0235, 0244
Schaub Lorenz 0347
Schneider 0282, 0316, 0318,
0320, 0333, 0340,
0342, 0349, 0350,
0382
Scotch 0026, 0031
Scott 0008, 0012, 0026,
0031, 0058, 0059,
0149, 0179
Sears 0008, 0010, 0019,
0021, 0026, 0027,
0031, 0049, 0051,
0059, 0111
SEG 0277, 0282, 0320,
0323, 0337, 0341,
0342, 0344, 0349,
0382
SEI 0320
SEI-Sinudyne 0339, 0341, 0347
Seleco 0344, 0346, 0347
Sencora 0323, 0343
Sentra 0323
Serino 0277
Sharp 0000, 0001, 0002,
0003, 0007, 0008,
0012, 0026, 0060,
0088, 0089, 0091,
0138, 0165, 0170,
0178, 0198, 0229,
0262, 0278, 0279,
0291, 0308, 0312,
0336, 0344, 0354,
0370, 0449, 0450,
0451, 0464, 0474,
0476
Sheng Chia 0178
Shogun 0008
Siarem 0320, 0339, 0341
Sierra 0320, 0350
Siesta 0161
Signature 0054
Silva 0277
Silver 0344
Singer 0321, 0339, 0341
Sinudyne 0320, 0339, 0341,
0349
Skantic 0347
Solavox 0347
Sonitron 0161, 0282
Sonoko 0282, 0320, 0323,
0337, 0342, 0343,
0349, 0350
Sonolor 0321, 0347
Sontec 0161, 0320, 0349,
0350
Sony 0038, 0044, 0045,
0047, 0055, 0104,
0105, 0107, 0110,
0123, 0184, 0220,
0248, 0249, 0251,
0252, 0254, 0326,
0343, 0344, 0371,
0374, 0457, 0475
Sound & Vision 0340, 0341
Soundesign 0008, 0026, 0031,
0058, 0059, 0179
Soundwave 0320, 0349, 0350
Squareview 0051
SSS 0008, 0058, 0179
Standard 0282, 0320, 0323,
0340, 0342, 0343,
0350
Starlite 0058, 0179, 0320,
0323, 0349
Stenway 0348
Stern 0346, 0347
Strato 0320, 0323
Stylandia 0282
Sunkai 0343
Sunstar 0320, 0323
Sunwood 0320, 0323, 0343,
0350
Superla 0277, 0282, 0342
Superscan 0013, 0178
SuperTech 0277, 0320, 0323
Supra 0323, 0343
Supre-Macy 0057
Supreme 0055, 0107
Susumu 0340
Sutron 0323, 0343
SVA 0151
Sydney 0277, 0282, 0342
Sylvania 0008, 0009, 0010,
0011, 0013, 0026,
0048, 0050, 0051,
0128, 0227, 0253
Symphonic 0051, 0058, 0062,
0128, 0179, 0215
Syntax 0199
Syntax-Brillian 0199
Sysline 0349
Sytong 0277
Tandy 0178, 0282, 0336,
0340, 0342, 0347
Tashiko 0277, 0282, 0342,
0344, 0346
Tatung 0052, 0177, 0282,
0320, 0342, 0349,
0350
TCM 0337, 0343
Teac 0282, 0320
Tec 0282, 0323, 0342,
0343
Technics 0017, 0023, 0056
TechniSat 0274, 0496, 0497,
0499
Techwood 0008, 0023, 0026,
0056
TEDELEX 0282
Teknika 0007, 0008, 0010,
0012, 0026, 0053,
0054, 0058, 0059,
0179
Teleavia 0345
Telecor 0282, 0320
Telefunken 0320, 0322, 0345,
0350
Telegazi 0320
Telemeister 0320
Telesonic 0320
Telestar 0320
Teletech 0320, 0323, 0343,
0349
Teleton 0282, 0342
Televideon 0277
Televiso 0321
Tensai 0282, 0320, 0323,
0340, 0343, 0350
Tesmet 0350
Tevion 0337, 0343
Texet 0277, 0282, 0323,
0342
Thomson 0162, 0188, 0189,
0285, 0320, 0322,
0342, 0345, 0350
Thorn 0320, 0349
TMK 0008, 0026, 0031
TNCi 0030
Tokai 0282, 0320, 0350
Tokyo 0277, 0342
Tomas hi 0348
Toshiba 0018, 0019, 0040,
0041, 0046, 0073,
0100, 0103, 0108,
0109, 0111, 0121,
0132, 0166, 0208,
0210, 0214, 0217,
0260, 0268, 0282,
0283, 0293, 0304,
0306, 0307, 0329,
0344, 0355, 0454
Totevision 0007
Towada 0282, 0347
Trakton 0282
Trans Continens 0282, 0320
Transtec 0277
Trident 0282
Triumph 0320
Uher 0161, 0171, 0320,
0347, 0350
Ultravox 0277, 0320, 0339,
0341, 0342
Unic Line 0320
United 0349
Universum 0161, 0171, 0282,
0320, 0337, 0349,
0350, 0351
Univox 0320
Vector Research 0050
Vestel 0282, 0320, 0346,
0347, 0349, 0350,
0351
Vexa 0320, 0323, 0343,
0349
Victor 0015, 0344, 0350
VIDEOLOGIC 0277
Videologique 0277, 0282, 0340,
0342
VideoSystem 0320, 0350
Videotechnic 0277, 0282
Vidikron 0010
Vidtech 0008, 0026, 0031,
0053
Viewsonic 0176, 0203, 0232,
0364
Viking 0057
Viore 0148
Visiola 0277, 0342
Vision 0282, 0320, 0350
Vizio 0008, 0177, 0218,
0242, 0500, 0501,
0502, 0503, 0506
Vortec 0320, 0349, 0350
Voxson 0171, 0320, 0339,
0346, 0347, 0350
Waltham 0282, 0320, 0342
Wards 0008, 0009, 0010,
0026, 0031, 0048,
0049, 0050, 0053,
0054, 0059
Watson 0320, 0349, 0350
Watt Radio 0277, 0341, 0342
Waycon 0111
Wega 0320, 0339, 0344
Wegavox 0323
Weltblick 0282, 0320, 0349,
0350
Westinghouse 0107, 0216, 0220
White Westinghouse
0037, 0090, 0277,
0320, 0341, 0342,
0349
Wincom 0101, 0106
Xrypton 0320
Yamaha 0008, 0026, 0050,
0053, 0080, 0081,
0082, 0083, 0086,
0087
Yamishi 0282, 0320
Yokan 0320
- 4 -
Yoko 0161, 0277, 0282,
0320, 0323, 0337,
0340, 0342, 0343,
0349, 0350
Yorx 0340
Zanussi 0282, 0346
Zenith 0008, 0028, 0029,
0030, 0031, 0054,
0061, 0062
VCR
ABS 1016
Adventura 1069
Adyson 1008
Aiwa 1024, 1026, 1027,
1069
Akai 1021, 1027
Akiba 1008, 1029
Akura 1008, 1027, 1029
Alba 1008, 1009, 1024,
1025, 1029, 1030
Alienware 1016
Ambassador 1030
American High 1068
Amstrad 1008, 1009, 1026
Anitech 1008, 1029
Apex 1088
ASA 1028, 1031
Asha 1070
Asuka 1008, 1026, 1028,
1029, 1031
Audio Dynamics 1064
Audiosonic 1009
Audiovox 1071
Baird 1009, 1025, 1026,
1027
Bang & Olufsen 1017
Basic Line 1008, 1009, 1024,
1025, 1029, 1030
Baur 1028
Beaumark 1070
Bell & Howell 1065
Bestar 1009, 1025, 1030
Black Panther Line
1009, 1025
Blaupunkt 1028
Bondstec 1008, 1030
Broksonic 1100
Bush 1008, 1009, 1024,
1025, 1029, 1049,
1051, 1063, 1217
Calix 1071
Candle 1070, 1071
Canon 1068
Cathay 1009
Catron 1030
CGE 1026, 1027
Cimline 1008, 1024, 1029
CineVision 1104
Citizen 1070, 1071
Clatronic 1008, 1030
Colortyme 1064
Condor 1009, 1025, 1030
Craig 1070, 1071
Crown 1008, 1009, 1025,
1029, 1030
Curtis Mathes 1064, 1068, 1070
Cybernex 1070
CyberPower 1016
Daewoo 1009, 1025, 1030,
1038, 1069, 1223
Dansai 1008, 1009, 1029
Dantax 1024
Daytron 1009, 1025
DBX 1064
De Graaf 1028
Decca 1026, 1027, 1028
Dell 1016
Denko 1008
DiamondVision 1096
DigiFusion 1014
DIRECTV 1019, 1105, 1110,
1111, 1113, 1116,
1122
Dish Network 1018
Dishpro 1018
Dual 1009, 1027, 1028
Dumont 1026, 1028
Durabrand 1114
Dynatech 1069
Echostar 1018
Elbe 1009
Elcatech 1008
Electrohome 1071
Electrophonic 1071
Elsay 1008
Elta 1008, 1009, 1029
Emerson 1008, 1020, 1068,
1069, 1071
ESC 1009, 1025
Etzuko 1008, 1029
Expressvu 1018
Ferguson 1027
Fidelity 1008, 1026
Finlandia 1028
Finlux 1026, 1027, 1028
Firstline 1008, 1024, 1029,
1031
Fisher 1065
Flint 1024
Formenti/Phoenix
1028
Frontech 1030
Fuji 1068
Fujitsu 1026
Funai 1026, 1069
Galaxy 1026
Garrard 1069
Gateway 1016
GBC 1029, 1030
GE 1068, 1070
GEC 1028
Geloso 1029
General 1030
General Technic 1024
GOI 1018
GoldHand 1008, 1029
Goldstar 1026, 1031, 1064,
1071
Goodmans 1008, 1009, 1025,
1026, 1029, 1030,
1031
Gradiente 1069
Graetz 1027
Granada 1028
Grandin 1008, 1009, 1025,
1026, 1029, 1030,
1031
Grundig 1028, 1029
Hanseatic 1009, 1028, 1031
Harley Davidson 1069
Harman/Kardon 1064
Harwood 1008
HCM 1008, 1029
Headquarter 1065
Hewlett Packard 1016
Hinari 1008, 1009, 1024,
1029
Hisawa 1024
Hitachi 1011, 1026, 1027,
1028, 1046, 1062
HNS 1110
Howard Computers
1016
HP 1016
HTS 1018
Hughes 1111, 1113, 1122
Hughes Network Systems
1110, 1116
Humax 1012, 1110, 1113
Hush 1016
Hypson 1008, 1009, 1024,
1029
iBUYPOWER 1016
Impego 1030
Imperial 1026
Inno Hit 1008, 1009, 1025,
1028, 1029, 1030
Innovation 1024
Instant Replay 1068
Interbuy 1008, 1031
Interfunk 1028
Intervision 1009, 1026
Irradio 1008, 1029, 1031
ITT 1027
ITV 1009, 1025, 1031
JC Penney 1064, 1065, 1068,
1070, 1071
JCL 1068
JVC 1007, 1018, 1027,
1039, 1064, 1065,
1066, 1067, 1078,
1089, 1092, 1093,
1094, 1095, 1113,
1208, 1209, 1212,
1213, 1215, 1218
Kaisui 1008, 1029
Karcher 1028
Kendo 1008, 1024, 1025,
1030
Kenwood 1027, 1064, 1065
Kodak 1068, 1071
Korpel 1008, 1029
Kyoto 1008
Lenco 1025
Leyco 1008, 1029
LG 1010, 1026, 1031,
1047, 1054, 1056,
1071, 1103, 1221
Lifetec 1024
Linksys 1016
Lloyd's 1069
Loewe Opta 1028, 1031
Logik 1008, 1029
Lumatron 1009, 1025
Luxor 1008
LXI 1071
M Electronic 1026
Magnavox 1020, 1068, 1114,
1126
Magnin 1071
Manesth 1008, 1029
Marantz 1028, 1064, 1065,
1068
Mark 1009
Marta 1071
Matsui 1024, 1031
Matsushita 1068
Media Center PC
1016
Mediator 1028
Medion 1024
MEI 1068
Memorex 1023, 1026, 1031,
1065, 1068, 1069,
1070, 1071, 1098,
1114
Memphis 1008, 1029
MGN Technology
1070
Micromaxx 1024
Microsoft 1016
Microstar 1024
Migros 1026
Mind 1016
Mitsubishi 1026, 1028, 1079
Motorola 1068
MTC 1070
Multitech 1008, 1026, 1028,
1029, 1030, 1069,
1070
Murphy 1026
NEC 1027, 1064, 1065
Neckermann 1027, 1028
NEI 1028
Nesco 1008, 1029
Nikkai 1008, 1009, 1030
Nikko 1071
Niveus Media 1016
Noblex 1070
Nokia 1009, 1027
Nordmende 1027
Northgate 1016
Oceanic 1026, 1027
Okano 1008, 1009, 1024
Olympus 1068
Optimus 1071
Orion 1023, 1024, 1051,
1115, 1217
Orson 1026
Osaki 1008, 1026, 1029,
1031
Otto Versand 1028
Palladium 1008, 1027, 1029,
1031
Panasonic 1000, 1022, 1044,
1055, 1068, 1072,
1085, 1090, 1091,
1120, 1121, 1214
Pathe Marconi 1027
Perdio 1026
Philco 1008, 1068
Philips 1006, 1013, 1028,
1035, 1040, 1045,
1046, 1050, 1058,
1059, 1061, 1068,
1076, 1101, 1110,
1113, 1116, 1117,
1122, 1126, 1210,
1211
Philips Magnavox
1076
Phonola 1028
Pilot 1071
Pioneer 1028, 1036
Polaroid 1088, 1099
Portland 1009, 1025, 1030
Prinz 1026
Profex 1029
Proline 1026
Proscan 1019
Prosonic 1009, 1024
Pulsar 1114
Pye 1028, 1102
Quarter 1065
Quartz 1065
Quasar 1068
Quelle 1026, 1028
Radialva 1008
RadioShack 1071
RadioShack/Realistic
1065, 1068, 1069,
1070, 1071
Radiola 1028
Radix 1071
Randex 1071
RCA 1019, 1068, 1070,
1075, 1110, 1113,
1122, 1125
Realistic 1065, 1068, 1069,
1070, 1071
ReplayTV 1022, 1123
Rex 1027
RFT 1008, 1028, 1030
Ricavision 1016
Roadstar 1008, 1009, 1025,
1029, 1031
Royal 1008
Runco 1114
Saba 1027
Saisho 1024, 1029
Samsung 1002, 1034, 1041,
1043, 1057, 1060,
1070, 1084, 1110,
1116, 1122, 1124,
1220, 1222
Samurai 1008, 1030
Sanky 1114
Sansui 1023, 1027, 1106,
1115
Sanyo 1032, 1065, 1070
Saville 1009
SBR 1028
Schaub Lorenz 1026, 1027
Schneider 1008, 1009, 1024,
1025, 1026, 1028,
1029, 1030, 1031
Sears 1065, 1068, 1071
SEG 1008, 1009, 1029
SEI-Sinudyne 1028
Seleco 1027
Sentra 1008, 1030
Sentron 1008, 1029
Sharp 1003, 1033, 1077,
1107, 1127, 1219
Shintom 1008, 1029
Shivaki 1031
Shogun 1070
Siemens 1031
Silva 1031
Silver 1009
Singer 1068
Sinudyne 1028
Solavox 1030
Sonic Blue 1022, 1123
- 5 -
Sonneclair 1008
Sonoko 1009, 1025
Sontec 1031
Sony 1001, 1016, 1048,
1053, 1073, 1074,
1080, 1081, 1082,
1083, 1108, 1118,
1216
Stack 1016
Stack 9 1016
Standard 1009, 1025
Stern 1009
STS 1068
Sunkai 1024
Sunstar 1026
Suntronic 1026
Sunwood 1008, 1029
Superscan 1020
Sylvania 1020, 1068, 1069,
1102, 1126
Symphonic 1008, 1069, 1126
Systemax 1016
Tagar Systems 1016
Taisho 1024
Tandberg 1009
Tandy 1065
Tashiko 1026, 1071
Tatung 1026, 1027, 1028
TCM 1015, 1024, 1042
Teac 1009, 1069
Tec 1008, 1009, 1030
Technics 1068
Teknika 1068, 1069, 1071
Teleavia 1027
Telefunken 1027
Teletech 1008, 1009
Tenosal 1008, 1029
Tensai 1008, 1026, 1029,
1031
Tevion 1024
Thomson 1005, 1027
Thorn 1027
Tivo 1108, 1110, 1111,
1113, 1117, 1118,
1119, 1122
TMK 1070
Tokai 1008, 1029, 1031
Tonsai 1029
Toshiba 1004, 1016, 1027,
1028, 1037, 1049,
1052, 1086, 1087,
1097, 1109, 1112,
1194
Totevision 1070, 1071
Touch 1016
Towada 1008, 1029
Towika 1008, 1029
TVA 1030
Uher 1031
UltimateTV 1019
Ultravox 1009
Unitech 1070
United Quick Star
1009, 1025
Universum 1026, 1028, 1031
Vector Research 1064
Video Concepts 1064
Videon 1024
Videosonic 1070
Viewsonic 1016
Voodoo 1016
Wards 1068, 1069, 1070,
1071
Weltblick 1031
XR-1000 1068, 1069
Yamaha 1064, 1065
Yamishi 1008, 1029
Yokan 1008, 1029
Yoko 1008, 1029, 1030,
1031
Zenith 1114
ZT Group 1016
DVD
4Kus 2051
Accurian 2142
Advent 2155, 2251
AEG 2362
Airis 2364
Aiwa 2322
Akai 2145, 2177, 2179,
2248
Akura 2356
Alba 2064, 2165, 2186,
2337, 2346
Alco 2149
Alize 2361
Allegro 2133
Amitech 2362
Amphion MediaWorks
2195
AMW 2195, 2363
Apex 2030, 2124, 2125,
2126, 2127, 2130,
2131
Apple 2241
Arrgo 2138
Asono 2364
Aspire 2152, 2222
Astar 2240
ATACOM 2364
Audiovox 2061, 2149
Avious 2367
Awa 23 63
Axion 2249
Bang & Olufsen 2128
Baze 2367
BBK 2364
Bellagio 2363
Best Buy 2359
Blaupunkt 2131
Blue Parade 2157
Boghe 2382
Brainwave 2362
Brandt 2148, 2188
Broksonic 2145, 2146
Bush 2064, 2110, 2170,
2268, 2290, 2346,
2358, 2367, 2383
California Audio Labs
2151
Cambridge Audio
2354
CAT 2352, 2353
CAVS 2192
Centrum 2353
CGV 2354, 2362
Changhong 2140
Cinetec 2363
CineVision 2133, 2237
Clatronic 2358, 2367
Coby 2031, 2046, 2360
Conia 2383
Continental Edison
2363
Crown 2362
C-Tech 2355
Curtis Mathes 2139
CVG 2377
CyberHome 2022, 2098, 2138,
2187, 2336
Cytron 2244
Daenyx 2363
Daewoo 2001, 2133, 2276,
2298, 2330, 2362,
2363, 2377
Daewoo International
2363
Dalton 2357
Dansai 2362, 2381
Daytek 2184, 2195, 2363
Dayton 2363
DEC 2358
Decca 2362
Denon 2059, 2151, 2193,
2332
Denver 2356, 2358, 2360,
2370
Denzel 2380
Desay 2205
Diamond 2354, 2355
DiamondVision 2225, 2232
Disney 2010, 2028
DK Digital 2339
Dmtech 2176
Dual 2380
Durabrand 2136
DVX 2355
Easy Home 2359
Eclipse 2354
E-Dem 2364
Electrohome 2362
Elin 2362
Elta 2341, 2361, 2362
Emerson 2129, 2137, 2150
Enterprise 2129
Enzer 2380
Epson 2247
ESA 2137
Finlux 2354, 2362, 2367
Fintec 2377
Fisher 2134
Funai 2137
Gateway 2051
GE 2029, 2131, 2156
Gericom 2351
GFM 2226
Giec 2382
Global Solutions 2355
Global Sphere 2355
Go Video 2133, 2213
Goodmans 2165, 2280, 2291,
2358, 2371, 2376,
2382
GPX 2227
Gradiente 2151
Graetz 2380
Greenhill 2131
Grundig 2349
Grunkel 2362, 2366
GVG 2377
H&B 2358
H_her 2364
Haaz 2354, 2355
Haier 2254
Harman/Kardon 2047, 2135
HiMAX 2359
Hitachi 2062, 2090, 2115,
2274, 2282, 2316,
2359, 2380
Hiteker 2130
Home Tech Industries
2364
Hyundai 2366
Ilo 2245
Initial 2131, 2245
Innovation 2182
Insignia 2002, 2137, 2253
Integra 2157
Irradio 2053
iSymphony 2246
JBL 2135
JVC 2020, 2096, 2097,
2099, 2100, 2101,
2102, 2103, 2106,
2107, 2160, 2257,
2260, 2262, 2263,
2321, 2324, 2326,
2327, 2343, 2464,
2465, 2468, 2469,
2471
Jwin 2198
Kansai 2360
Kawasaki 2149
Kennex 2362
Kenwood 2041, 2151, 2348
KeyPlug 2362
Kiiro 2362
Kingavon 2358
Kiss 2380
KLH 2131, 2149
Koda 2358
Koss 2013, 2148, 2158
KXD 2359
Landel 2143
Lasonic 2132
Lawson 2355
Lecson 2381
Lenco 2358, 2362, 2367
Lenoxx 2136, 2153
LG 2002, 2033, 2038,
2057, 2129, 2133,
2189, 2191, 2223,
2238, 2270, 2288,
2335, 2373, 2375
Life 2182
Lifetec 2182
Limit 2355
Liquid Video 2158
Liteon 2043, 2051, 2142
Loewe 2320
LogicLab 2355
Magnavox 2025, 2050, 2137,
2150, 2159, 2224,
2230, 2358
Magnex 2367
Majestic 2360
Marantz 2328
Marquant 2362
Matsui 2148, 2378
McIntosh 2199
Mecotek 2362
Medion 2182
Memorex 2028, 2145, 2234
MiCO 2354, 2382
Micromaxx 2182
Microsoft 2156
Microstar 2182
Minoka 2362
Minowa 2367
Mintek 2131, 2245
Mitsubishi 2003
Mizuda 2358, 2359
Monyka 2380
Mustek 2186
Mx Onda 2354
Mystral 2366
Naiko 2362
Nesa 2131
Neufunk 2380
Nevir 2362
Next Base 2143
Nexxtech 2243
NU-TEC 2383
Onkyo 2159, 2368
Oopla 2051
Oppo 2196, 2255
Optim 2381
Optimus 2180
Orava 2358
Orbit 2363
Orion 2073, 2110
Oritron 2148, 2158
P&B 2358
Pacific 2355
Panasonic 2011, 2024, 2034,
2042, 2058, 2062,
2066, 2067, 2093,
2116, 2117, 2118,
2119, 2120, 2121,
2122, 2123, 2151,
2159, 2164, 2166,
2167, 2172, 2173,
2175, 2209, 2214,
2275, 2277, 2278,
2281, 2282, 2283,
2301, 2374, 2470
Parasound 2197
peeKTON 2364
Philips 2008, 2012, 2025,
2044, 2050, 2051,
2053, 2060, 2072,
2108, 2111, 2147,
2159, 2163, 2169,
2174, 2181, 2185,
2230, 2261, 2266,
2267, 2286, 2287,
2289, 2295, 2300,
2302, 2317, 2328,
2338, 2342, 2350,
2467
Phonotrend 2367
Pioneer 2016, 2017, 2018,
2019, 2035, 2092,
2094, 2095, 2109,
2157, 2180, 2190,
2212, 2269, 2272,
2299, 2304, 2305,
2306, 2307, 2308,
2309, 2310, 2311,
2344, 2345, 2347,
2379
Pointer 2362
Polaroid 2125, 2215, 2235
Portland 2362
Powerpoint 2363
- 6 -
Prima 2252
Proceed 2130
Proscan 2156
Prosonic 2360, 2377
Protron 2202
Provision 2358
Pye 2144
Qwestar 2148
Raite 2380
RCA 2021, 2029, 2104,
2105, 2131, 2149,
2156, 2157, 2229
RedStar 2356, 2360, 2362
Regent 2153
Reoc 2355
Rimax 2361
Rio 2133
Roadstar 2331, 2358
Ronin 2363
Rotel 2203
Rowa 2154, 2383
Rownsonic 2353
Saba 2148, 2188
Sabaki 2355
Saivod 2362
Sampo 2141
Samsung 2000, 2045, 2077,
2112, 2113, 2114,
2115, 2151, 2200,
2216, 2219, 2228,
2264, 2265, 2271,
2279, 2294, 2303,
2329, 2365
Sansui 2073, 2145, 2354,
2355, 2362
Sanyo 2134, 2145, 2217,
2292
ScanMagic 2186
Schaub Lorenz 2362
Schneider 2176
Scientific Labs 2355
Scott 2161, 2357
Seeltech 2364
SEG 2162, 2355, 2363,
2380
Sharp 2006, 2040, 2088,
2091, 2182, 2194,
2220, 2221, 2231,
2236, 2293, 2340
Shinsonic 2245
Sigmatek 2359, 2364
Silva 2356
Singer 2354, 2355
Skymaster 2325, 2355
Skyworth 2356
Slim Art 2362
SM Electronic 2355
Sonic Blue 2133
Sontech 2366
Sony 2004, 2005, 2007,
2009, 2014, 2015,
2023, 2026, 2027,
2052, 2068, 2069,
2070, 2071, 2074,
2075, 2084, 2085,
2087, 2168, 2171,
2208, 2210, 2211,
2258, 2273, 2284,
2285, 2312, 2313,
2314, 2315, 2318,
2319, 2466
Soundmaster 2355
Soundmax 2355
Spectra 2363
Spectroniq 2201
Standard 2355
Star Cluster 2355
Starmedia 2358, 2364
Sungale 2204
Sunkai 2362
Superscan 2150
Supervision 2355
Sylvania 2012, 2137, 2150,
2178, 2230, 2239
Symphonic 2108, 2230
Synn 2355
T.D.E. Systems 2366
Tatung 2001, 2362
TCM 2182, 2297
Teac 2149, 2333, 2355,
2383
Tec 2356
Technics 2151
Technika 2362, 2367
Telefunken 2353
Tensai 2362
Tevion 2182, 2355, 2357
Theta Digital 2157
Thomson 2183, 2188, 2334,
2372
Tokai 2356, 2380
Top Suxess 2364
Toshiba 2032, 2036, 2037,
2039, 2048, 2049,
2054, 2055, 2072,
2073, 2076, 2078,
2079, 2086, 2145,
2159, 2218, 2233,
2256, 2259, 2296,
2369
TRANScontinents
2363, 2367
Transonic 2367
Trio 2362
Trutech 2242
TruVision 2359
TSM 2364
Umax 2361
United 2367
Urban Concepts 2159
US Logic 2245
Venturer 2149
Viewmaster 2364
Vocopro 2206
VocoStar 2207
Waitec 2364
Welltech 2382
Westinghouse 2063, 2250
Wharfedale 2354, 2355
Woxter 2361, 2364
Xbox 2156, 2183
Xlogic 2355, 2362
XMS 2362
Xoro 2382
Yamada 2051, 2361, 2363
Yamaha 2056, 2064, 2065,
2080, 2081, 2082,
2083, 2089, 2118,
2151, 2323
Yamakawa 2363, 2380
Yukai 2186
Zenith 2002, 2129, 2133,
2159, 2223
Blu-ray Disc
LG 2033
Panasonic 2011, 2209, 2214
Pioneer 2212
Samsung 2045, 2113
Sharp 2194, 2220, 2221
Sony 2075
Yamaha 2064
DVR
Bush 2110
Hitachi 2090
Panasonic 2066, 2067, 2093,
2116, 2117, 2119,
2120, 2122, 2123
Philips 2108, 2111
Pioneer 2016, 2017, 2018,
2019, 2092, 2094,
2095, 2109
RCA 2105
Samsung 2113, 2219
Sharp 2088, 2091
Sony 2084, 2085, 2087
Toshiba 2086
Yamaha 2089, 2118
DVD Recorder
Aspire 2222
Astar 2240
Broksonic 2146
Go Video 2213
Hitachi 2062
Insignia 2002
Irradio 2053
JVC 2100, 2101, 2106,
2107
LG 2033, 2057, 2223,
2238
Liteon 2043
Panasonic 2011, 2034, 2058,
2062, 2116, 2117,
2119, 2120, 2121,
2123
Philips 2008, 2044, 2050,
2051, 2147
Pioneer 2017, 2035
Pye 2144
Samsung 2000, 2112, 2216
Sansui 2073
Sanyo 2217
Sony 2004, 2005, 2007,
2052, 2068, 2069,
2074, 2208, 2210,
2211
Sylvania 2239
Toshiba 2032, 2036, 2037,
2039, 2049, 2054,
2055, 2076
Yamaha 2056
Cable
ABC 3002, 3003, 3017,
3066, 3067, 3086,
3093, 3119, 3122
ADB 3020
Adelphia 3081
Alcatel 3016
Americast 3124
Amstrad 3022, 3098
Antronix 3065, 3070
Archer 3070
Arcon 3098
AT&T 3095
Axis 3098
Bell South 3124
Cable Vision 3092
Cabletenna 3065
Cabletime 3104
Cableview 3087
Clearmaster 3127
ClearMax 3127
Clyde Cablevision
3105
Colour Voice 3068
Comcast 3084, 3088, 3117
Comcrypt 3107
Comtronics 3069
Contec 3074
Coolmax 3127
COX 3084
Cryptovision 3110
Director 3084
Eastern 3075
Everquest 3123
Fidelity 3098
Filmnet 3107
Filmnet Cablecrypt
3111
Filmnet Comcrypt
3111
Finlux 3097
Focus 3126
Foxtel 3022
France Telecom 3100, 3101
Freebox 3023
GC Electronics 3070
GE 3066, 3093
GEC 3105
Gemini 3072, 3123
General Instrument
3017, 3025, 3066,
3084, 3090, 3096,
3117
Goldstar 3120
Gooding 3099
Grundig 3098, 3099
Hamlin 3073, 3078
Hirschmann 3097
Hitachi 3066
HomeChoice 3106
Humax 3021, 3080, 3083
ITT Nokia 3097
Jasco 3123
Jerrold 3017, 3018, 3025,
3066, 3072, 3084,
3090, 3096, 3119,
3123
JVC 3099
Kabel Deutschland
3024, 3027, 3121
Macab 3101
Magnavox 3079
Maspro 3099
Matsui 3099
MegaCable 3117
Memorex 3076, 3122
Minerva 3099
Mnet 3107
Motorola 3025, 3026, 3084,
3088, 3090, 3095,
3117
Movie Time 3077, 3109
Mr Zapp 3101
Multichoice 3107
Multitech 3127
NEC 3064
NET Brazil 3085
Nokia 3097
Noos 3101
NSC 3077
Oak 3074
Pace 3006, 3089, 3121
Palladium 3099
Panasonic 3112, 3118, 3122
Paragon 3122
Philips 3068, 3071, 3079,
3099, 3100, 3101,
3103
Pioneer 3001, 3006, 3094,
3098, 3114, 3116,
3120
Popular Mechanics
3126
Proscan 3066, 3093
Pulsar 3122
PVP Stereo Visual Matrix
3018
Quasar 3122
RadioShack 3123, 3127
RCA 3030, 3031, 3087,
3118
Realistic 3070
Recoton 3126
Regal 3078
Regency 3075
Rembrandt 3066
Runco 3122
Sagem 3101
Samsung 3069, 3089, 3114,
3120
SAT 3098
Scientific Atlanta
3000, 3001, 3002,
3003, 3006, 3028,
3029, 3081, 3086,
3089, 3094, 3095,
3108
Signal 3072, 3123
Signature 3066
Sony 3092, 3125
Sprucer 3118
Standard Component
3115
Starcom 3017, 3072, 3119,
3123
Stargate 3072, 3123
Starquest 3072, 3123
Supercable 3090
Supermax 3127
Tele+1 3107, 3111
Telepiu 3107
Thomson 3082, 3091
TIME WARNER
3084
Tocom 3067
Torx 3017
Toshiba 3122
Tristar 3127
Tudi 3102
Tusa 3072, 3123
- 7 -
TV86 3077
Unika 3065, 3070
United Cable 3018, 3119
Universal 3065, 3070
Universum 3097, 3099
V2 3127
Videoway 3019
View Star 3074, 3077, 3079
Viewmaster 3127
Vision 3127
Visiopass 3097, 3100, 3101
Vortex View 3127
Wittenberg 3098
Zenith 3113, 3122, 3124
Zentek 3126
Sattelite
AB Sat 4216, 4217
AccessHD 4104
ADB 4220
AGS 4216
Akai 4053, 4055
Alba 4001, 4004, 4006,
4007, 4062, 4217
Aldes 4005, 4007, 4010
Allsat 4048, 4053, 4055
Allsonic 4005, 4008, 4024
Alltech 4217
Alpha 4053
Alpha Digital 4104
Alphastar 4077
Amitronica 4217
Amstrad 4011, 4035, 4217,
4218
Anglo 4217
Ankaro 4005, 4008, 4024,
4217
Anttron 4001, 4004
Apollo 4001
Armstrong 4011, 4053
Artec 4100
Asat 4053, 4055
ASLF 4217
Astacom 4216
Astra 4009, 4011, 4054,
4217, 4219
Astro 4004, 4008, 4010,
4015, 4024, 4213,
4218, 4219
AudioTon 4004, 4048
Aurora 4222
Austar 4222
Axiel 4216
Axis 4008, 4009, 4024,
4050
Best 4008, 4024
Blaupunkt 4015
Blue Sky 4217
Boca 4011, 4054, 4059,
4217
Boston 4216
Brain Wave 4013
Broadcast 4012
Broco 4217
BSkyB 4035, 4041
BT 4216
Bubu Sat 4217
Bush 4006, 4045
Cambridge 4218
Canal Satellite 4213
Canal+ 4213
CaptiveWorks 4099
Channel Master 4007, 4110
Chaparral 4075
CHEROKEE 4216
Chess 4212, 4217
CityCom 4006, 4215, 4219
Clatronic 4013
CNT 4010
Comag 4080, 4081, 4082,
4083, 4086
Commlink 4005
Comtech 4050
Condor 4008, 4024, 4219
Connexions 4014, 4024
Conrad 4024, 4215, 4218,
4219
Conrad Electronic
4217, 4219
Contec 4050
Coolsat 4096
Cosat 4048
Coship 4109
Crown 4011
Daeryung 4014
Daewoo 4057, 4217
DDC 4007
Delega 4007
Dew 4050
Diamond 4051
Digiality 4219
Digital Stream 4105
DIRECTV 4056, 4064, 4067,
4068, 4070, 4071,
4074, 4107, 4116,
4119, 4121, 4122,
4123, 4127, 4192,
4193, 4194, 4195,
4196, 4197, 4198,
4199, 4200, 4201,
4202, 4203, 4206,
4207, 4221
Discoverer 4212
Discovery 4216
Diseqc 4216
Dish Network 4018, 4065, 4089,
4092, 4094, 4095,
4117
Dishpro 4018, 4117
Distrisat 4053
Ditristrad 4048
DNT 4014, 4053, 4055
Drake 4072
DStv 4222
Dune 4024
Echostar 4014, 4018, 4065,
4089, 4117, 4217
Einhell 4001, 4005, 4011,
4217, 4218
Elap 4216, 4217
Elekta 4010
Elsat 4217
Elta 4001, 4008, 4024,
4048, 4053, 4055
Emanon 4001
Emme Esse 4008, 4024
Engel 4217
Ep Sat 4006
EURIEULT 4031
Eurodec 4052
Europa 4053, 4218, 4219
Europhon 4219
Eurosat 4011
Eurosky 4024, 4011, 4008,
4215, 4218, 4219
Eurostar 4011, 4215, 4219
Eutelsat 4217
Exator 4001, 4004
Expressvu 4117
Fenner 4024, 4212, 4217
Ferguson 4006, 4052, 4214
Fidelity 4218
Finlandia 4006
Finlux 4006
FinnSat 4050, 4052
Flair Mate 4217
Foxtel 4222
Freecom 4001, 4049, 4218
FTEmaximal 4024, 4217
Fuba 4024, 4001, 4008,
4014, 4015, 4055,
4215
Galaxis 4024, 4005, 4008,
4009, 4050, 4048,
4215, 4222
GE 4093, 4066, 4111,
4197
General Instrument
4073, 4019
GMI 4011
GOI 4117
Goldbox 4213
GoldStar 4049
Goodmans 4029, 4002, 4006
Goodmind 4111
Grandin 4031
Grothusen 4001, 4049
Grundig 4006, 4004, 4015,
4035, 4211, 4218,
4222
Hänsel & Gretel 4219
Hantor 4001, 4013
Hanuri 4010
Hauppauge 4044
Heliocom 4219
Helium 4219
Hinari 4007
Hirschmann 4024, 4015, 4210,
4218, 4219, 4216
Hisawa 4013
Hisense 4016
Hitachi 4114, 4006, 4199,
4203
Homecast 4087, 4084, 4085
Houston 4048
HTS 4117
Hughes 4064, 4068, 4194,
4192, 4196, 4202
Hughes Network Systems
4071
Humax 4097, 4025, 4030,
4060
Huth 4005, 4011, 4012,
4013, 4050, 4048,
4219, 4223
Hypson 4031
Ilo 4016
Imex 4031
Innovation 4008
Insignia 4107
Intertronic 4011
Intervision 4048, 4219
ITT Nokia 4006
Jerrold 4019
Johansson 4013
JOK 4216
JSR 4048
JVC 4089, 4065, 4117,
4029
Kamm 4217
Kathrein 4015, 4055, 4053,
4063, 4034, 4042,
4215, 4216, 4217
Kathrein Eurostar
4215
Klap 4216
Konig 4219
Kosmos 4049
KR 4004
Kreiselmeyer 4015
K-SAT 4217
Kyostar 4001
L&S Electronic 4024
Lasat 4024, 4010, 4008,
4054, 4215, 4212,
4219
Lasonic 4108
Lenco 4024, 4001, 4049,
4215, 4219, 4217
Leng 4013
Lennox 4048
Lenson 4218
Lexus 4053
LG 4103, 4107, 4049
Lifesat 4024, 4008, 4212,
4217
Lifetec 4008
Lorenzen 4219
Lorraine 4049
Lupus 4024, 4008
Luxor 4218
Lyonnaise 4052
Macab 4052
Magnavox 4127, 4101
Manata 4031, 4216, 4217
Manhattan 4006, 4010, 4048,
4216
Marantz 4055
Mascom 4010
Maspro 4006, 4217
Matsui 4216
Max 4219
Mediabox 4213
Mediamarkt 4011
Mediasat 4009, 4213, 4218
Medion 4024, 4008, 4217
Medison 4217
Mega 4055, 4053
Memorex 4127
Metronic 4031, 4028, 4001,
4004, 4005, 4010,
4217
Metz 4015
Micro electronic 4218, 4219, 4217
Micro Technology
4217
MicroGem 4106
Micromaxx 4024, 4008
Microstar 4008
Microtec 4217
Minerva 4015
Mitsubishi 4006, 4015, 4202
Mitsumi 4054
Morgan's 4011, 4054, 4055,
4053, 4217
Motorola 4090, 4091, 4088,
4019
Multichoice 4222
Multitec 4212
Muratto 4049
Mysat 4217
Navex 4013
Neuhaus 4009, 4048, 4218,
4219, 4217
Neusat 4217
Next Level 4019
NextWave 4223
Nikko 4011, 4217
Nokia 4006, 4040
Nordmende 4001, 4006, 4007,
4010, 4052
Nova 4222
Novis 4013
Oceanic 4051
Octagon 4001, 4004, 4050
Okano 4011
Optex 4048
Optus 4213, 4222, 4223
Orbitech 4001, 4212, 4213,
4218
OSat 4004
Otto Versand 4015
Pace 4006, 4015, 4035,
4043, 4047, 4216
Pacific 4051
Packsat 4216
Palcom 4007
Palladium 4011, 4218
Palsat 4212, 4218
Panasat 4222
Panasonic 4121, 4126, 4124,
4006, 4035, 4036,
4221, 4198
Panda 4006, 4219
Pansat 4125
Patriot 4216
Paysat 4127
PCT 4110
Philco 4101
Philips 4071, 4068, 4127,
4006, 4055, 4053,
4061, 4033, 4213,
4216, 4196, 4202,
4203, 4201, 4206
Phoenix 4050
Phonotrend 4006, 4005, 4048
Pioneer 4046, 4213
Polsat 4052
Predki 4013
Premiere 4048, 4213
Priesner 4011
Primestar 4076
Profile 4216
Promax 4006
Prosat 4007, 4005
Proscan 4093, 4066, 4122,
4197
Protek 4051
Proton 4016
Provision 4010
Quadral 4024, 4007, 4005,
4008, 4216
Quelle 4015, 4215, 4219
Quiero 4052
RadioShack 4019
Radiola 4055, 4053
Radix 4014, 4037
- 8 -
© 2010 Yamaha Corporation All rights reserved.
YC434A0/RC
Rainbow 4004
RCA 4093, 4066, 4112,
4113, 4118, 4119,
4116, 4122, 4197,
4207
Realistic 4078
Redpoint 4009
Redstar 4024, 4008
RFT 4005, 4055, 4053
Roadstar 4217
Roch 4031
Rover 4024, 4217
Saba 4010, 4215, 4219,
4216
Sabre 4006
Sagem 4023, 4052
Sakura 4050
Samsung 4064, 4071, 4069,
4123, 4120, 4003,
4000, 4001, 4032,
4196, 4200
SAT 4007, 4218
Sat Cruiser 4223
Sat Partner 4001, 4004, 4010,
4013, 4049, 4218
Sat Team 4217
Satcom 4012, 4219
Satec 4217
Satelco 4024
Satford 4012
Satmaster 4012
Satplus 4212
Schneider 4008, 4212, 4216
Schwaiger 4051, 4212, 4219
SCS 4215
Seemann 4011, 4009, 4014
SEG 4024, 4001, 4008,
4013
Seleco 4048
Servi Sat 4031, 4217
Siemens 4015
Silva 4049
Skantin 4217
Skardin 4009
Skinsat 4218
SKR 4217
Skymaster 4017, 4022, 4005,
4212, 4217
Skymax 4055, 4053
SkySat 4212, 4218, 4219,
4217
Skyvision 4048
SM Electronic 4212, 4217
Smart 4215, 4217
Sony 4067, 4070, 4213
SR 4011, 4054
Star Choice 4019
Starland 4217
Starring 4013
Start Trak 4001
Strong 4024, 4001, 4004,
4008, 4049, 4222
STS 4115
STVI 4031
Sumida 4011
Sunny Sound 4024
Sunsat 4217
Sunstar 4024, 4011, 4054
Supermax 4223
Tandberg 4052
Tandy 4004
Tantec 4006
TCM 4008
Techniland 4012
TechniSat 4021, 4026, 4027,
4014, 4053, 4038,
4039, 4212, 4213,
4218
Technology 4222
Technosat 4223
Technowelt 4219
Teco 4011, 4054
Telanor 4007
Telasat 4215, 4219
Telecom 4217
Telefunken 4017, 4001, 4216
Teleka 4004, 4011, 4014,
4218, 4219
Telemaster 4010
Telesat 4219
Telestar 4212, 4213, 4218
Televes 4006, 4218
Telewire 4048
Tempo 4223
Tevion 4008, 4217
Thomson 4020, 4006, 4052,
4058, 4208, 4215,
4213, 4219, 4216,
4217
Thorens 4051
Thorn 4006
Tivax 4104
Tivo 4196
Tokai 4053
Tonna 4006, 4012, 4048,
4218, 4217
Toshiba 4194, 4202, 4203
Triad 4049
Triasat 4218
Triax 4015, 4215, 4218,
4217
Turnsat 4217
Tvonics 4214
Twinner 4031, 4217
UEC 4222
Uher 4212
UltimateTV 4070
Uniden 4079, 4127
Unisat 4011, 4050, 4053
Unitor 4013
Universum 4015, 4215, 4219
US Digital 4016
Variosat 4015
Vega 4024
Ventana 4055, 4053
Viewsat 4098
Visiosat 4013, 4048, 4216,
4217
Voom 4019
Vortec 4001
Welltech 4212
WeTeKom 4212, 4218
Wevasat 4006
Wewa 4006
Winersat 4013
Wisi 4006, 4014, 4015,
4218, 4219
Woorisat 4010
Worldsat 4216
Xrypton 4024
XSat 4217
Zehnder 4024, 4010, 4008,
4209, 4215
Zenith 4102, 4107, 4195
Zodiac 4004
CD
Yamaha 5082, 5095
CD Recorder
Yamaha 5083
MD
Yamaha 5080, 5081, 5086
Tape
Yamaha 5084, 5087
Tuner
Yamaha 5066, 5071, 5085,
5088, 5090, 5092,
5094
XM
Yamaha 5091, 5093
SIRIUS
Yamaha 5064, 5067
DOCK
Yamaha 5068, 5089
NET
Yamaha 5076, 5079
LD
Yamaha 2080
Amplifier
Yamaha 5019, 5020
AV Receiver English
Safety Brochure
2 En
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert you to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use this apparatus near water.
6Clean only with dry cloth.
7Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT SAFETY INSTRUCTIONS
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifications
not expressly approved by Yamaha may void your authority,
granted by the FCC, to use the product.
2 IMPORTANT:
When connecting this product to accessories
and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3NOTE:
This product has been tested and found to comply with
the requirements listed in FCC Regulations, Part 15 for Class “B”
digital devices. Compliance with these requirements provides a
reasonable level of assurance that your use of this product in a
residential environment will not result in harmful interference with
other electronic devices.
This equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found in the users
manual, may cause interference harmful to the operation of other
electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product is
found to be the source of interference, which can be determined by
turning the unit “OFF” and “ON”, please try to eliminate the
problem by using one of the following measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit breaker or
fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type of
product. If you can not locate the appropriate retailer, please
contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe
Ave, Buena Park, CA 90620.
The above statements apply ONLY to those products distributed by
Yamaha Corporation of America or its subsidiaries.
A (Power key)
Turns on the power of this unit or sets it to the standby mode.
CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
English
3 En
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this sound system in a well ventilated, cool, dry, clean
place - away from direct sunlight, heat sources, vibration, dust,
moisture, and/or cold. For proper ventilation, allow the following
minimum clearances.
Top: 30 cm, Rear: 10 cm, Sides: 10 cm
3 Locate this unit away from other electrical appliances, motors, or
transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes from cold
to hot, and do not locate this unit in an environment with high
humidity (i.e. a room with a humidifier) to prevent condensation
inside this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign object may fall onto this
unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
Other components, as they may cause damage and/or
discoloration on the surface of this unit.
Burning objects (i.e. candles), as they may cause fire, damage
to this unit, and/or personal injury.
Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to this
unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain, etc.
in order not to obstruct heat radiation. If the temperature inside
this unit rises, it may cause fire, damage to this unit, and/or
personal injury.
7 Do not plug in this unit to a wall outlet until all connections are
complete.
8 Do not operate this unit upside-down. It may overheat, possibly
causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet, grasp
the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might damage
the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this unit
with a higher voltage than specified is dangerous and may cause
fire, damage to this unit, and/or personal injury. Yamaha will not
be held responsible for any damage resulting from use of this unit
with a voltage other than specified.
13 To prevent damage by lightning, keep the power cable and
outdoor antennas disconnected from a wall outlet or this unit
during a lightning storm.
14 Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The
cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time (i.e.
vacation), disconnect the AC power plug from the wall outlet.
16 Be sure to read the “Troubleshooting” section on common
operating errors before concluding that this unit is faulty.
17 Before moving this unit, press A to set it to standby mode and
disconnect the AC power plug from the wall outlet.
18 VOLTAGE SELECTOR (Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit must
be set for your local main voltage BEFORE plugging into the AC
wall outlet. Voltages are:
......................AC 110-120/220-240V, 50/60Hz (General model)
......................................... AC 220-240V, 50/60Hz (Asia model)
19 Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power cable from the outlet,
then leave this unit alone.
20 When using this unit for a long time, this unit may become warm.
Turn the power off, then leave this unit alone for cooling.
21 Install this unit near the AC outlet and where the AC power plug
can be reached easily.
22 The batteries shall not be exposed to excessive heat such as
sunshine, fire or the like. When you dispose of batteries, follow
your regional regulations.
23 Excessive sound pressure from earphones and headphones can
cause hearing loss.
24 When replacing the batteries, be sure to use batteries of the same
type. Danger of explosion may happen if batteries are incorrectly
replaced.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit itself
is turned off by A. This state is called the standby mode. In
this state, this unit is designed to consume a very small
quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
4 En
Notes on remote controls and batteries
Do not spill water or other liquids on the remote control.
Do not drop the remote control.
Do not leave or store the remote control in the following
conditions:
places of high humidity, such as near a bath
places of high temperatures, such as near a heater or stove
places of extremely low temperatures
dusty places
Insert the battery according to the polarity markings (+ and -).
Change all batteries if you notice the following conditions:
the operation range of the remote control narrows
the transmit indicator does not flash or is dim
If the batteries run out, immediately remove them from the
remote control to prevent an explosion or acid leak.
If you find leaking batteries, discard the batteries
immediately, taking care not to touch the leaked material. If
the leaked material comes into contact with your skin or gets
into your eyes or mouth, rinse it away immediately and
consult a doctor. Clean the battery compartment thoroughly
before installing new batteries.
Do not use old batteries together with new ones. This may
shorten the life of the new batteries or cause old batteries to
leak.
Do not use different types of batteries (such as alkaline and
manganese batteries) together. Specification of batteries may
be different even though they look the same.
Before inserting new batteries, wipe the compartment clean.
If the remote control is without batteries for more than 2
minutes, or if exhausted batteries remain in the remote
control, the contents of the memory may be cleared. In such a
case, install new batteries and set the remote control code.
Dispose of batteries according to your regional regulations.
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the instructions
described below.
The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
Special Instructions for U.K. Model
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide
slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
POUR LES CONSOMMATEURS CANADIENS
Pour éviter les chocs électriques, introduire la lame la plus
large de la fiche dans la borne correspondante de la prise et
pousser jusqu’au fond. Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du Canada.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit. Retain
this Owner's Manual in a safe place for future reference.
Note
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L or
coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
distortion and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is
often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group
recommend you to avoid prolonged exposure from excessive volume levels.
5 En
Limited Guarantee for European Economic Area (EEA) and Switzerland
Thank you for having chosen a Yamaha product. In the unlikely event that your Yamaha product needs guarantee service, please contact the dealer from
whom it was purchased. If you experience any difficulty, please contact Yamaha representative office in your country. You can find full details on our
website (http://www.yamaha-hifi.com/ or http://www.yamaha-uk.com/ for U.K. resident).
The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original purchase. Yamaha
undertakes, subject to the conditions listed below, to have the faulty product or any part(s) repaired, or replaced at Yamaha’s discretion, without any charge
for parts or labour. Yamaha reserves the right to replace a product with that of a similar kind and/or value and condition, where a model has been
discontinued or is considered uneconomic to repair.
Conditions
1 The original invoice or sales receipt (showing date of purchase, product code and dealer’s name) MUST accompany the defective product, along with a
statement detailing the fault. In the absence of this clear proof of purchase, Yamaha reserves the right to refuse to provide free of charge service and the
product may be returned at the customer’s expense.
2 The product MUST have been purchased from an AUTHORISED Yamaha dealer within the European Economic Area (EEA) or Switzerland.
3 The product must not have been the subject of any modifications or alterations, unless authorised in writing by Yamaha.
4 The following are excluded from this guarantee:
a. Periodic maintenance and repair or replacement of parts due to normal wear and tear.
b. Damage resulting from:
(1) Repairs performed by the customer himself or by an unauthorised third party.
(2) Inadequate packaging or mishandling, when the product is in transit from the customer. Please note that it is the customer’s responsibility to
ensure the product is adequately packaged when returning the product for repair.
(3) Misuse, including but not limited to (a) failure to use the product for its normal purpose or in accordance with Yamaha’s instructions on the proper
use, maintenance and storage, and (b) installation or use of the product in a manner inconsistent with the technical or safety standards in force in
the country where it is used.
(4) Accidents, lightning, water, fire, improper ventilation, battery leakage or any cause beyond Yamaha’s control.
(5) Defects of the system into which this product is incorporated and/or incompatibility with third party products.
(6) Use of a product imported into the EEA and/or Switzerland, not by Yamaha, where that product does not conform to the technical or safety
standards of the country of use and/or to the standard specification of a product sold by Yamaha in the EEA and/or Switzerland.
5 Where the guarantee differs between the country of purchase and the country of use of the product, the guarantee of the country of use shall apply.
6 Yamaha may not be held responsible for any losses or damages, whether direct, consequential or otherwise, save for the repair or replacement of the
product.
7 Please backup any custom settings or data, as Yamaha may not be held responsible for any alteration or loss to such settings or data.
8 This guarantee does not affect the consumer’s statutory rights under applicable national laws in force or the consumer’s rights against the dealer arising
from their sales/purchase contract.
Information for Users on Collection and Disposal of Old Equipment
and Used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and
electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC
and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent
any potential negative effects on human health and the environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your local
municipality, your waste disposal service or the point of sale where you purchased the items.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact
your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
© 2010 Yamaha Corporation All rights reserved. YC434A0/SBEN

Navigation menu