Yamaha RX V475/RX V575/HTR 4066/HTR 5066 Firmware Update Installation Manual RXV475

User Manual: Yamaha RX-V475/RX-V575/HTR-4066/HTR-5066 Firmware Update Installation Manual

Open the PDF directly: View PDF PDF.
Page Count: 6

DownloadYamaha RX-V475/RX-V575/HTR-4066/HTR-5066 Firmware Update Installation Manual RXV475
Open PDF In BrowserView PDF
5 Check the updated firmware version
a. Power on the AV receiver and press the SETUP key on the remote control.
b. Select “Network” > “Network Update”.
c. Confirm that the firmware version is updated to the latest version.
SETUP key

Congratulations!
You have completed the firmware update. Your AV receiver is ready for normal use.

Troubleshooting
CASE 1 Error message appeared during the update
Cause:

For some reason, the receiver can’t read the firmware data.

Method:

For your solution, check the following

[Update through Internet]
❏ Check Internet connection.
Your Internet connection is working by playing an Internet radio station.
(See owner’s manual for details)

[Update by USB thumb drive]
❏ USB thumb drive is connected properly to the receiver.
❏ USB thumb drive is not password protected.
(AV receiver cannot read data from a security protected USB thumb drive)

❏ Make sure the USB thumb drive is inserted before the receiver is powered on for the
update.

❏ The firmware data, R03xx-xxxx.bin is stored in the root directory of the USB thumb drive.
❏ There is no other data except the firmware data in the USB thumb drive.
❏ No folders are created in the USB thumb drive.
Else, retry the update by USB using another USB thumb drive.

CASE 2 Firmware update doesn’t start for other reasons
● Receiver doesn’t power up after the update.
● Or, error message appeared when confirming the firmware version.
Recovery method using USB method:
1. Unplug the AC power cable from wall outlet.
2. Insert the USB thumb drive which has the firmware data stored inside, into the USB port
located on the front panel.
3. Press and hold the INFO key and keep it pressed while you plug the AC power cable
back into the wall outlet again.
“ U S B U P D A T E ” will appear on the front display. Then, release the INFO key.
4. The update will start automatically.
5. When “ U P D A T E S U C C E S S ” appears on the display, firmware update is completed.
Power off the receiver and remove the USB thumb drive.
6. Confirm updated firmware version.

USB UPDATE

UPDATE SUCCESS

INFO key

USB port
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Has XFA                         : No
Page Count                      : 6
Modify Date                     : 2016:11:25 18:43:23+09:00
EXIF Metadata provided by EXIF.tools

Navigation menu