Yamaha RX V573 Easy Setup Guide
User Manual: Yamaha RX-V573 Easy Setup Guide
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
RX-V473_573_esg_U.fm Page 1 Monday, January 23, 2012 2:40 PM UAB 1 Preparation AV Receiver Accessories Check that the following accessories are supplied with the product. Remote control Easy Setup Guide Insert the batteries the right way round. AM antenna English To reduce the impact on natural resources, the Owner’s Manual for this product is supplied on CD-ROM. For more information about this product, refer to the Owner’s Manual on the supplied CD-ROM. PDF versions of this guide and “Owner’s Manual” can be downloaded from the following website. http://download.yamaha.com/ [For U.S. customers only] Visit the following website for additional information, FAQ’s, downloads such as “Owner’s Manual” and product updates. http://usa.yamaha.com/support/ Black process 45.0° 240.0 LPI FM antenna YPAO microphone *The supplied FM antenna varies depending on the region of purchase. CD-ROM (Owner’s Manual) This document explains how to set up a 5.1- or 7.1-channel system (RX-V573 only) and play back surround sound from a BD/DVD on the unit. Batteries (AAA, R03, UM-4) (x2) Safety Brochure Easy Setup Guide • The illustrations of the main unit and remote control used in this guide are of the RX-V573 (U.S.A. model), unless otherwise specified. Cables required for connections The following cables (not supplied) are required to build the system described in this document. • Speaker cables (depending on the number of speakers) • HDMI cable (x2) • Audio pin cable (x1) • Digital optical cable (x1) (not required if your TV supports ARC [Audio Return Channel]) RX-V473_573_esg_U.fm Page 2 Monday, January 23, 2012 2:40 PM 2 Placing speakers Set up the speakers in the room using the following diagram as a reference. For information on other speaker systems, refer to “Owner’s Manual”. 5.1-channel system 7.1-channel system (RX-V573 only) 1 1 9 2 2 3 4 9 3 5 10° to 30° 10° to 30° 6 7 30 cm (1 ft) or more 4 5 10° to 30° 10° to 30° 1 Front speaker (L) 2 Front speaker (R) 3 Center speaker 4 Surround speaker (L) 5 Surround speaker (R) 6 Surround back speaker (L) 7 Surround back speaker (R) 9 Subwoofer 2 En Black process 45.0° 240.0 LPI RX-V473_573_esg_U.fm Page 3 Monday, January 23, 2012 2:40 PM 3 Connecting speakers/subwoofer • (U.S.A. and Canada models only) Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For details, see “Setting the speaker impedance” in “Owner’s Manual”. 1 Connect the front speakers (1/2) to the FRONT (//\) terminals. 2 Connect the center speaker (3) to the CENTER terminal. The unit (rear) • (Except for U.S.A. and Canada models) Use speakers with an impedance of at least 6 Ω. The unit (rear) SPEAKERS SPEAKERS PB PB FRONT • Use a subwoofer equipped with built-in amplifier. CENTER SURROUND FRONT Y • Before connecting the speakers, remove the unit’s power cable from the AC wall outlet and turn off the subwoofer. • Ensure that the core wires of the speaker cable do not touch each other or come into contact with the unit’s metal areas. This may damage the unit or the speakers. If the speaker cables short circuit, “Check SP Wires” will appear on the front display when the unit is turned on. CENTER SURROUND Y OR OUT OR OUT SUBWOOFER SUBWOOFER ■ Connecting speaker cables Speaker cables have two wires. One is for connecting the negative (–) terminals of the unit and the speaker, and the other is for the positive (+) terminals. If the wires are colored to prevent confusion, connect the black wire to the negative and the other wire to the positive terminals. a Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable and twist the bare wires of the cable firmly together. + (red) b c FR ON 1 9 2 1 3 9 2 3 T d a 4 – (black) 5 4 5 b Loosen the speaker terminal. c Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the terminal. d Tighten the terminal. Using a banana plug (U.S.A., Canada, China, Australia and General models only) a Tighten the speaker terminal. Banana plug a FR ON T b b Insert a banana plug into the end of the terminal. En Black process 45.0° 240.0 LPI 3 RX-V473_573_esg_U.fm Page 4 Monday, January 23, 2012 2:40 PM 3 Connect the surround speakers (4/ 5) to the SURROUND (//\) terminals. 4 Connect the subwoofer (9) to the SUBWOOFER jack. The unit (rear) Connect the surround back speakers (6/ 7) to the SURROUND BACK (//\) terminals. The unit (rear) The unit (rear) SPEAKERS SPEAKERS SPEAKERS PB PB PB FRONT For 7.1-channel system (RX-V573 only) CENTER SURROUND FRONT CENTER FRONT SURROUND CENTER SURROUND SURROUND BACK/BI AMP /ZONE B SINGLE Y Y Y OR OUT OR OUT OR OUT SUBWOOFER SUBWOOFER SUBWOOFER Audio pin cable 1 9 4 2 1 3 9 5 4 1 2 9 3 5 En Black process 45.0° 240.0 LPI 3 4 5 6 4 2 7 RX-V473_573_esg_U.fm Page 5 Monday, January 23, 2012 2:40 PM 4 Connecting external devices Before connecting the power cable (General model only) Make sure you set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110-120/220-240 V, 50/60 Hz. TV Audio out (optical) HDMI in HDMI out HDMI HDMI BD/DVD player OPTICAL HDMI O HDMI OUT jack a b Connect a TV to the unit with the other HDMI cable. VOLTAGE SELECTOR (General model only) VOLTAGE SELECTOR c Connect a TV to the unit with a digital optical cable. This connection is required to play back TV audio on the unit. This connection is not required if your TV supports ARC (Audio Return Channel). HDMI 1 jack HDMI HDMI HDMI OUT (BD/DVD) Connect external devices to the unit. a Connect a BD/DVD player to the unit with an HDMI cable. If the BD/DVD player is currently connected to the TV directly with an HDMI cable, disconnect the cable from the TV and connect it to this unit. HDMI b c 1 110V120V HDMI 1 220V240V d Connect the power cable to an AC wall outlet. ARC d HDMI OUT HDMI 2 HDMI 1 HDMI 3 HDMI 4 NETWORK (BD/DVD) ANTENNA AM COMPONENT VIDEO FM PR PR PB PB SPEAKERS FRONT O AV 4 (OPTICAL) jack CENTER SURROUND SURROUND BACK/BI AMP /ZONE B SINGLE Y COMPONENT VIDEO VIDEO OPTICAL (TV) AV 4 OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 • For information on how to connect radio antennas or other external devices, see “PREPARATIONS” in “Owner’s Manual”. To an AC wall outlet ARC 2 Turn on the unit, the TV and the BD/DVD player. 3 Use the TV remote control to change the TV input to video from the unit. Y MONITOR OUT ( TV ) AV 5 AV 6 AV OUT SUBWOOFER AUDIO The unit (rear) The connections are complete. Proceed to the next page to optimize the speaker settings. YPAO MIC Turn on the unit DIRECT INFO MEMORY PRESET FM AM TUNING VOLUME SCENE BD DVD PHONES INPUT TONE CONTROL TV NET PROGRAM RADIO STRAIGHT SILENT CINEMA VIDEO AUX AUDIO VIDEO USB • By connecting a TV to the unit with an HDMI cable, you can configure the unit’s settings with the menu displayed on the TV. In addition, you can select the on-screen menu language from English (default), French, German, Spanish, Russian and Chinese. For details, refer to “Owner’s Manual”. In this guide, illustrations of English menu screens are used as examples. iPod/iPhone/iPad 5V 2.1A The unit (front) En Black process 45.0° 240.0 LPI 5 RX-V473_573_esg_U.fm Page 6 Monday, January 23, 2012 2:40 PM 5 Optimizing the speaker settings automatically (YPAO) 1 The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. Connect the YPAO microphone to the YPAO MIC jack on the front panel. The following screen appears. Auto Setup • During the measuring process, test tones are output at high volume. Ensure that the test tones do not frighten small children. Also, refrain from using this function at night when it may be a nuisance to others. Exit HDMI 1 2 3 4 1 2 3 4 A • During the measuring process, keep the room as quiet as possible. • Do not connect headphones. 5 6 AUDIO V-AUX USB NET • Move to the corner of the room or leave the room. TUNER B ZONE FM VOL. INFO MEMORY MOVIE MUSIC The unit (front) TUNING ENHANCER SCENE BD DVD TV NET RADIO R SR VOLUME ENTER RETURN DISPLAY POP-UP MENU MUTE MODE YPAO microphone Listening position • To cancel the operation, disconnect the YPAO microphone, or use the cursor keys to select “Exit” and press ENTER, before starting the measurement. SETUP OPTION SETUP TOP MENU MAX SW C DIRECT SLEEP CROSSOVER/ HIGH CUT MIN L SL SUR. DECODE STRAIGHT Turn on the subwoofer and set the volume to half. If the crossover frequency is adjustable, set it to maximum. MAX [SETUP]:Start AM PRESET MIN Power Amp Assign Basic AV • Do not stand between the speakers and the YPAO microphone during the measurement process (about 3 minutes). VOLUME Press SETUP key to Start SOURCE RECEIVER • During the measuring process, you cannot adjust the volume. Preparing for YPAO Start CODE SET 1 2 3 4 5 6 7 8 9 0 10 Cursor keys ENTER 2 To start the measurement, press SETUP. The measurement will start in 10 seconds. The following screen appears on the TV when the measurement finishes. Auto Setup Start ENT Exit TV Result 3 / 2 / 0.1 ch INPUT TV VOL Measurement Finished 3.0 / 10.5 m TV CH MUTE -3.0 / +10.0 dB Ear height Place the YPAO microphone at your listening position (same height as your ears). We recommend the use of a tripod as a microphone stand. You can use the tripod screws to fix the microphone in place. 6 En Black process 45.0° 240.0 LPI VOL. Finished L SL SW C R SR RX-V473_573_esg_U.fm Page 7 Monday, January 23, 2012 2:40 PM If “W-1:Out of Phase” appears • If any error message (such as E-1) or warning message (such as W-2) appears, see “Error messages” or “Warning messages” in “Owner’s Manual”. • If the warning message “W-1:Out of Phase” appears, see “If “W-1:Out of Phase” appears”. 3 Use the cursor keys (e/r) to select “SAVE” (Save) and press ENTER. Follow the procedure below to check the speaker connections. Depending on the type of speakers or room environment, this message may appear even if the speakers are connected correctly. Auto Setup Start Auto Setup Measurement Finished Start Exit SAVE Measurement Finished Result Exit 3 / 2 / 0.1 ch Result 3.0 / 10.5 m 3 / 2 / 0.1 ch -3.0 / +10.0 dB 3.0 / 10.5 m Warning message W-1:Out of Phase -3.0 / +10.0 dB a Check for the blinking of the front display’s indicator to identify the problem speaker. VOL. >SaveCancel 4 L SL SW C Problem speaker (blinks) R SR Disconnect the YPAO microphone from the unit. This completes optimization of the speaker settings. • The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be exposed to direct sunlight or high temperatures (such as on top of AV equipment). VOL. W-1:PHASE L SL SW C R SR b Check the cable connections (+/-) of the problem speaker. If the speaker is connected correctly: You can save the current settings. Proceed to step 3. If the speaker is connected incorrectly: Turn off the unit, reconnect the speaker cable, and then try YPAO measurement again. En Black process 45.0° 240.0 LPI 7 RX-V473_573_esg_U.fm Page 8 Monday, January 23, 2012 2:40 PM 6 Playing back a BD/DVD Now let’s play back a BD/DVD. We recommend playing back multichannel audio (5.1-channel or more) to feel surround sound produced by the unit. Many more features! 1 Press HDMI 1 to select “HDMI 1” as the input source. VOL. HDMI1 CODE SET L SL SW C R SR SOURCE RECEIVER HDMI 1 2 3 4 2 3 4 5 6 AUDIO A V-AUX USB NET HDMI 1 AV 1 2 3 Press STRAIGHT repeatedly to select “STRAIGHT”. VOL. AM MEMORY MOVIE MUSIC PRESET STRAIGHT TUNING L SL SW C R SR SUR. DECODE STRAIGHT STRAIGHT ENHANCER • When “STRAIGHT” (straight decode) is enabled, each speaker produces each channel audio signal directly (without sound field processing). DIRECT SLEEP SCENE BD DVD TV NET RADIO • (RX-V573 only) If you play back 5.1-channel audio on the 7.1-channel system, no sounds will be heard from the surround back speakers. OPTION SETUP VOLUME ENTER RETURN POP-UP MENU VOLUME 4 DISPLAY TOP MENU Press VOLUME to adjust the volume. MUTE VOL. MODE Volume -30.0dB 1 2 3 5 6 7 9 0 10 R SR This completes the basic setup procedure. ENT If surround sound is not working TV INPUT TV VOL L SL SW C 4 8 Connecting other playback devices Connect audio devices (such as CD player), game consoles, camcorders, and many others. Selecting the sound mode B ZONE FM Please refer to “Owner’s Manual” on the supplied CD-ROM to help you get the most out of the unit. Start playback on the BD/DVD player. TUNER INFO The unit has various other functions. TV CH MUTE Sound is only being output from the front speakers during multichannel audio playback Check the digital audio output setting on the BD/DVD player. It may be set to 2-channel output (such as PCM). Select the desired sound program (CINEMA DSP) or surround decoder suitable for movies, music, games, sports programs, and other uses. Playing back from iPod By using a USB cable supplied with iPod, you can enjoy iPod music on the unit. ■ Listening to FM/AM radio ■ Playing back music stored on a USB storage device ■ Playing back the network contents ■ Selecting the input source and favorite settings at once For more information, see “What you can do with the unit”. No sound is coming from a specific speaker See “Troubleshooting” in “Owner’s Manual”. © 2012 Yamaha Corporation Black process 45.0° 240.0 LPI Printed in Malaysia ZA52610
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Page Mode : UseOutlines XMP Toolkit : 3.1-702 Modify Date : 2012:03:26 14:27:22-07:00 Create Date : 2012:01:23 14:47:23+09:00 Metadata Date : 2012:03:26 14:27:22-07:00 Format : application/pdf Document ID : uuid:dca5c05c-8da9-4468-b267-edbfe5971a7c Instance ID : uuid:2e7fba29-dcf9-40de-ac53-0a3008d1c153 Has XFA : No Page Count : 8 Page Layout : SinglePageEXIF Metadata provided by EXIF.tools