Yamaha RX V775/RX V675 Easy Setup Guide V775 Esg UAB En

User Manual: Yamaha RX-V775/RX-V675 Easy Setup Guide

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

UAB

1 Preparation
AV Receiver

Accessories
Check that the following accessories are supplied with the product.
 Remote control

 Batteries
(AAA, R03, UM-4) (x2)

Insert the batteries the right way round.

Easy Setup Guide

 AM antenna

English

 YPAO microphone

*The supplied FM antenna
varies depending on the
region of purchase.

 CD-ROM
(Owner’s Manual)

This document explains how to set up a 5.1- or 7.1-channel system and
play back surround sound from a BD/DVD on the unit.

 FM antenna

 Safety Brochure

 Easy Setup Guide

• The illustrations of the main unit and remote control used in this guide are of the RX-V775 (U.S.A.
model), unless otherwise specified.

To reduce the impact on natural resources, the Owner’s Manual for this product is
supplied on CD-ROM. For more information about this product, refer to the
Owner’s Manual on the supplied CD-ROM.
PDF versions of this guide and “Owner’s Manual” can be downloaded from the
following website.
http://download.yamaha.com/
[For U.S. customers only]
Visit the following website for additional information, FAQ’s, downloads such as
“Owner’s Manual” and product updates.
http://usa.yamaha.com/support/

Cables required for connections
The following cables (not supplied) are required to build the system described in this
document.
• Speaker cables (depending on the number of speakers)
• HDMI cable (x2)
• Audio pin cable (x1)
• Digital optical cable (x1) (not required if your TV supports ARC [Audio Return Channel])

2 Placing speakers
Set up the speakers in the room using the following diagram as a reference.
For information on other speaker systems, refer to “Owner’s Manual”.

5.1-channel system

7.1-channel system

10° to 30°

30 cm (1 ft) or more

1 Front speaker (L)

5
10° to 30°

10° to 30°

2 Front speaker (R)
3 Center speaker
4 Surround speaker (L)
5 Surround speaker (R)
6 Surround back speaker (L)
7 Surround back speaker (R)
9 Subwoofer

3 Connecting speakers/subwoofer
• Under its default settings, the unit is configured for 8-ohm
speakers. When connecting 6-ohm speakers, set the unit’s
speaker impedance to “6  MIN”. For details, see “Setting the
speaker impedance” in “Owner’s Manual”.

Connect the front speakers (1/2)
to the FRONT (//\) terminals.

• Use a subwoofer equipped with built-in amplifier.

• The illustrations of the unit (rear) used in this section are of the
RX-V775.

Connect the center speaker (3) to the
CENTER terminal.

EXTRA SP
ZONE2/F.PRESENCE

• Before connecting the speakers, remove the unit’s power cable
from the AC wall outlet and turn off the subwoofer.
• Ensure that the core wires of the speaker cable do not touch
each other or come into contact with the unit’s metal areas. This
may damage the unit or the speakers. If the speaker cables
short circuit, “Check SP Wires” will appear on the front display
when the unit is turned on.

EXTRA SP
ZONE2/F.PRESENCE

The unit (rear)

SPEAKERS
FRONT

CENTER

SPEAKERS
SURROUND

FRONT

SURROUND BACK/BI-AMP

CENTER

SURROUND

SURROUND BACK/BI-AMP

CENTER

SINGLE

SUBWOOFER

■ Connecting speaker cables
Speaker cables have two wires. One is for connecting the
negative (–) terminals of the unit and the speaker, and the
other is for the positive (+) terminals. If the wires are
colored to prevent confusion, connect the black wire to
the negative and the other wire to the positive terminals.
a Remove approximately 10
mm (3/8”) of insulation
from the ends of the
speaker cable and twist
the bare wires of the cable
firmly together.

+ (red)

FR
ON

a
4

– (black)

b Loosen the speaker terminal.
c Insert the bare wires of the cable into the gap on the side
(upper right or bottom left) of the terminal.
d Tighten the terminal.

Using a banana plug
(U.S.A., Canada, China,
Australia and General
models only)
a Tighten the speaker
terminal.

Banana plug

FR
ON
T

b Insert a banana plug into the end of the terminal.
En

Connect the surround speakers
(4/5) to the SURROUND (//\)
terminals.

Connect the subwoofer (9) to the
SUBWOOFER PRE OUT (1) jack.

• Use a subwoofer equipped with built-in amplifier.

EXTRA SP
ZONE2/F.PRESENCE

The unit (rear)

SPEAKERS
CENTER

Connect the surround back speakers
(6/7) to the SURROUND BACK (//\)
terminals.

EXTRA SP
ZONE2/F.PRESENCE

The unit (rear)
FRONT

For 7.1-channel system

The unit (rear)

SPEAKERS
SURROUND

FRONT

SURROUND BACK/BI-AMP

CENTER

SPEAKERS
SURROUND

FRONT

SURROUND BACK/BI-AMP

CENTER

SINGLE

CENTER

SURROUND

SURROUND BACK/BI-AMP

CENTER

SINGLE

SUBWOOFER

Audio pin cable

4 Connecting external devices

Before connecting the power cable (General model only)
Make sure you set the switch position of
VOLTAGE SELECTOR according to your local voltage.
Voltages are AC 110-120/220-240 V, 50/60 Hz.

Audio out
(optical)

HDMI in

HDMI out

HDMI

BD/DVD player
OPTICAL

HDMI

b Connect a TV to the unit with the other HDMI cable.

HDMI
HDMI 1

HDMI OUT
1

HDMI 1 jack

(BD/DVD)

c Connect a TV to the unit with a digital optical cable.
This connection is required to play back TV audio
on the unit. This connection is not required if your
TV supports ARC (Audio Return Channel).

VOLTAGE SELECTOR
(General model only)

VOLTAGE SELECTOR

HDMI
OUT
jack

Connect external devices to the unit.
a Connect a BD/DVD player to the unit with an HDMI
cable.
If the BD/DVD player is currently connected to the
TV directly with an HDMI cable, disconnect the
cable from the TV and connect it to this unit.

HDMI

220V240V

2
ARC

d Connect the power cable to an AC wall outlet.

110V120V

O
TRIGGER OUT
12V 0.1A
DC OUT
5V 0.5A

NETWORK

HDMI 1

HDMI OUT

(NET)

HDMI 2

HDMI 3

HDMI 4

HDMI 5

(BD/DVD)

IN
1

OPTICAL

EXTRA SP
ZONE2/F.PRESENCE

VIDEO

(TV)
AV4

COMPONENT
VIDEO

COAXIAL

(RADIO)

ANTENNA

AV3
Y

SPEAKERS
PB

AV 4 (OPTICAL) jack

AV2

VIDEO

• For information on how to connect radio antennas or other
external devices, see “PREPARATIONS” in “Owner’s Manual”.

To an AC wall
outlet

REMOTE

OPTICAL

(TV)
AV4

2
ARC

OUT

FRONT

OPTICAL

CENTER

SURROUND

SURROUND BACK/BI-AMP

CENTER

Turn on the unit, the TV and the BD/DVD
player.

Use the TV remote control to change the
TV input to video from the unit.

Y
AV 1

MONITOR OUT

COMPONENT VIDEO

SINGLE

AUDIO 1

AUDIO 2

ZONE 2

AV 5

AV 6

AV OUT

FRONT

ZONE OUT

SURROUND
SUR. BACK
PRE OUT

SUBWOOFER

The unit (rear)

The connections are complete. Proceed to the next
page to optimize the speaker settings.
MAIN ZONE

PURE DIRECT

Turn on the unit
ZONE 2

ZONE CONTROL

INFO

MEMORY

PRESET

TUNING

INPUT

VOLUME
SCENE

BD
DVD

PHONES

YPAO MIC

TONE CONTROL

NET

PROGRAM

RADIO

STRAIGHT

SILENT CINEMA

VIDEO AUX

HDMI/
MHL 5V 1A

VIDEO

• By connecting a TV to the unit with an HDMI cable, you can
configure the unit’s settings with the menu displayed on the TV. In
addition, you can select the on-screen menu language from English
(default), Japanese, French, German, Spanish, Russian, Italian and
Chinese. For details, refer to “Owner’s Manual”. In this guide,
illustrations of English menu screens are used as examples.

2.1A

The unit (front)

5 Optimizing the speaker settings automatically (YPAO)

The following screen appears on the TV.

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the
distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as
volume balance and acoustic parameters, to suit your room.
• During the measuring process, test tones are output at high volume. Ensure that the test
tones do not frighten small children. Also, refrain from using this function at night when it
may be a nuisance to others.

Connect the YPAO microphone to the
YPAO MIC jack on the front panel.

RECEIVER

SOURCE

RECEIVER
HDMI

• During the measuring process, you cannot adjust the volume.
5

V-AUX

• During the measuring process, keep the room as quiet as possible.

• Do not connect headphones.

TUNER

USB

NET

AUDIO

• Do not stand between the speakers and the YPAO microphone during the measurement
process (about 3 minutes).
• Move to the corner of the room or leave the room.

MAIN

PARTY

ZONE 2

HDMI OUT

• To cancel the operation, disconnect the YPAO microphone
before starting the measurement.

SCENE
BD
DVD

Preparing for YPAO
Turn on the subwoofer and set
the volume to half. If the
cross-over frequency is
adjustable, set it to maximum.

NET

PROGRAM

The unit (front)

MUTE

RADIO

YPAO MIC
TOP MENU

POP-UP/MENU

ON
SCREEN

Cursor keys
ENTER
RETURN

CROSSOVER/
HIGH CUT
RETURN

To start the measurement, use the cursor
keys to select “Measure” and press
ENTER.
The measurement will start in 10 seconds.

OPTION

ENTER

VOLUME

The following screen appears on the TV when
the measurement finishes.

DISPLAY
BAND

MODE

TUNING

PRESET

SUR. DECODE STRAIGHT

MIN

MAX

MIN

MAX

MOVIE

MUSIC

INFO

SLEEP

ENHANCER PURE DIRECT

YPAO microphone

MEMORY

ENT

INPUT
TV VOL

Ear height

Place the YPAO microphone at your
listening position (same height as your
ears). We recommend the use of a
tripod as a microphone stand. You can
use the tripod screws to fix the
microphone in place.

MUTE

TV CH
CODE SET

• If the cursor keys do not work, press RECEIVER and then use
the cursor keys.
• If any error message (such as E-1) or warning message (such
as W-2) appears, see “Error messages” or “Warning
messages” in “Owner’s Manual”.
• If the warning message “W-1:Out of Phase” appears, see
“If “W-1:Out of Phase” appears” (next page).

Use the cursor keys to select
“Save/Cancel” and press ENTER.

Use the cursor keys to select “SAVE” and
press ENTER.

If “W-1:Out of Phase” appears
Follow the procedure below to check the speaker
connections.

a Use the cursor keys to select “Result” and press ENTER.
b Use the cursor keys to select “Wiring”.
c Check the cable connections (+/–) of the speaker that
was identified as being “Reverse” in the warning
message.

If the speaker is connected correctly:
Depending on the type of speakers or room
environment, this message may appear even if the
speakers are connected correctly.
In this case, you can ignore the message.

Disconnect the YPAO microphone from the
unit.

This completes optimization of the speaker settings.

Press RETURN and proceed to step 3.
If the speaker is connected incorrectly:
Turn off the unit, reconnect the speaker cable, and then
try YPAO measurement again.

• The YPAO microphone is sensitive to heat, so should not be
placed anywhere where it could be exposed to direct sunlight or
high temperatures (such as on top of AV equipment).

6 Playing back a BD/DVD
Now let’s play back a BD/DVD.
We recommend playing back multichannel audio
(5.1-channel or more) to feel surround sound produced
by the unit.

Many more features!
1

VOL.

HDMI1

RECEIVER

SOURCE

Press HDMI 1 to select “HDMI 1” as the
input source.
L
SL

SW
C

R
SR

HDMI

HDMI 1

V-AUX
AV

AUDIO

TUNER

USB

NET

MAIN

PARTY

ZONE 2

2
3

NET

PROGRAM

MUTE

Press STRAIGHT repeatedly to select
“STRAIGHT”.

VOLUME

STRAIGHT
VOLUME

L
SL

SW
C

R
SR

Press VOLUME to adjust the volume.
VOL.

TOP MENU

Volume -30.0dB

POP-UP/MENU

ON
SCREEN

OPTION

L
SL

SW
C

R
SR

This completes the basic setup procedure.

ENTER

RETURN

If surround sound is not working

DISPLAY
BAND

MODE

TUNING

PRESET

SUR. DECODE STRAIGHT
MOVIE

MUSIC

INFO

SLEEP

Sound is only being output from the front speakers
during multichannel audio playback

Check the digital audio output setting on the BD/DVD
player.

It may be set to 2-channel output (such as PCM).

ENHANCER PURE DIRECT

STRAIGHT

MEMORY

ENT

No sound is coming from a specific speaker

INPUT
TV VOL
MUTE

TV CH
CODE SET

Connecting other playback
devices
Connect audio devices (such as CD player),
game consoles, camcorders, and many others.

Selecting the sound mode

VOL.

RADIO

Please refer to “Owner’s Manual” on the supplied
CD-ROM to help you get the most out of the unit.

Start playback on the BD/DVD player.

HDMI OUT

SCENE
BD
DVD

The unit has various other functions.

See “Troubleshooting” in “Owner’s Manual”.

Select the desired sound program (CINEMA
DSP) or surround decoder suitable for movies,
music, games, sports programs, and other uses.

Playing back from iPod
By using a USB cable supplied with iPod, you
can enjoy iPod music on the unit.

■ Listening to FM/AM radio
■ Playing back music stored on
a USB storage device
■ Playing back the network
contents
■ Selecting the input source and
favorite settings at once
For more information, see “What you can do
with the unit”.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Modify Date                     : 2013:02:27 15:37:21+09:00
Create Date                     : 2012:11:22 15:07:05+09:00
Metadata Date                   : 2013:02:27 15:37:21+09:00
Format                          : application/pdf
Title                           : 
Description                     : 
Creator                         : 
Subject                         : 
Document ID                     : uuid:29aeed18-90f6-4006-90be-1961af9e85f5
Instance ID                     : uuid:583bfea4-1e6c-479d-b426-ef71a058e726
Keywords                        : 
Page Mode                       : UseOutlines
Page Count                      : 8

EXIF Metadata provided by EXIF.tools

Yamaha RX V775/RX V675 Easy Setup Guide V775 Esg UAB En

Navigation menu

Versions of this User Manual:

Views

Navigation