Yamaha SRT 1500 Firmware Update Installation Manual SRT1500 E

User Manual: Yamaha SRT-1500 Firmware Update Installation Manual

Open the PDF directly: View PDF PDF.
Page Count: 1

DownloadYamaha SRT-1500 Firmware Update Installation Manual SRT1500 E
Open PDF In BrowserView PDF
■ UPDATING THE UNIT’S FIRMWARE

New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected
to the Internet, you can download the firmware via the network and
update it.

4

4

Press the ENTER key.
The TV screen goes black and firmware update begins.

The firmware update will begin.

The indicators on the front panel glow to indicate progress
during the update.

When the unit is turned on for the first time after a new version of the
unit’s firmware has been released, a message indicating that a
firmware update is available will be displayed on the TV screen,
and an envelope icon ( ) will be displayed in the setup menu.

Press the key on the front panel while pressing the VOLUME – key
on the unit.
The indicators on the front panel glow to indicate progress during the update.

Update progress

Update progress

The unit’s firmware can be updated as follows.
• Update firmware from “Network Update” in the setup menu.

• If there are multiple firmware updates, the indicators will start glowing as
each firmware update begins.

• Update firmware by connecting a USB flash drive to which the
unit’s firmware update has been saved.

/
ENTER

• Update firmware using the dedicated MusicCast CONTROLLER
app installed on a mobile device. Follow MusicCast
CONTROLLER guides to operate the app and update the
firmware.

5

• If there are multiple firmware updates, the indicators will start glowing as each firmware update
begins.

5
When the indicators on the front panel glow alternately as shown
below, press the (power) key on the unit's front panel.

When the indicators on the front panel glow alternately as shown
below, press the
(power) key on theunit's front panel.
All indicators glow

All indicators glow

SETUP

Notes

Alternates

• Do not operate the unit or disconnect the power cable or network cable during
firmware update. Firmware update takes about 20 minutes or more (depending
on your Internet connection speed).

Alternates

• If the Internet connection speed is slow, or the unit is connected to the wireless
network, network update may not be possible depending on the condition of
the network connection. In this case, update the firmware using the USB flash
drive.
• To perform the following procedure, your TV must be connected to the unit via
HDMI.
• For details on update, visit the Yamaha website.

Using “Network Update” in the setup menu
to update firmware

1

One indicator glows
One indicator glows

The firmware update is complete.

The firmware update is complete.

• If the firmware update fails, the indicator at far right will flash blue. Use the (power) key to turn the unit off
and then on again, and repeat the procedure from step 1 again. If the firmware update fails again, confirm
that the unit is properly connected to a network.

• If the firmware update fails, the indicator at far right will flash blue. Use the (power) key to turn the unit off
and then on again, and repeat the procedure from step 1 again. If the firmware update fails again, confirm
the following.
– The USB flash drive is correctly connected to the UPDATE ONLY jack
– See information provided as firmware updates are performed, and be sure that the USB flash drive
contains the firmware update for this unit.
– The unit is properly connected to a network.

Press the SETUP key twice.
The setup menu is displayed on the TV screen.

2

Use the / keys to select “Network”, and then
press the ENTER key.

3

Use the / keys to select “Network Update”, and
then press the ENTER key.
The following screen is displayed when firmware updates
are available.

• To cancel the operation without updating the firmware, press the SETUP
key.

Updating firmware with connection of a USB flash drive
Download the latest firmware version from the Yamaha website to a USB flash drive,
which can then be used to update the unit’s firmware.
See information provided when updating firmware for details.

1
2
3

Save this unit’s firmware to a USB flash drive.
Turn off the unit.
Connect the USB flash drive to the UPDATE ONLY jack on the unit’s
rear panel.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Instance ID                     : uuid:4cfd95a5-545b-47e1-94bd-301796ab3ba8
Document ID                     : uuid:2022E52B-4125-E6FB-F7AE-CBC84C57AC10
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : Adobe InDesign CC (Windows)
Modify Date                     : 2016:11:25 18:48:01+09:00
Create Date                     : 2015:09:10 16:36:48+09:00
Metadata Date                   : 2016:11:25 18:48:01+09:00
Format                          : application/pdf
Title                           : 
Creator                         : 
History Action                  : linearized, encrypted
History Software Agent          : PDFlib PLOP 5.0 (.NET/Win64), PDFlib PLOP 5.0 (.NET/Win64)
History When                    : 2016:11:25 18:48:01+09:00, 2016:11:25 18:48:01+09:00
Page Layout                     : SinglePage
Page Count                      : 1
EXIF Metadata provided by EXIF.tools

Navigation menu