Yamaha Xmv Series Data Sheet PA_DataSheet Form_2013.04

Yamaha-Xmv-Series-Data-Sheet-647271 yamaha-xmv-series-data-sheet-647271

: Yamaha Xmv-Series-Data-Sheet yamaha-xmv-series-data-sheet-647890 yamaha pdf

Open the PDF directly: View PDF .
Page Count: 2

XMV Series

XMV8280

XMV8140

XMV428 0

XMV414 0

Multi-channel Power Ampliers

XMV8280 Rear Panel

XMV8280-D Rear Panel

Multi-channel power ampliers with features designed specically to benet

installation sound systems.

•

Four-channel or eight-channel power amp that can operate in both high-impedance (70V/100V line) or low-impedance (4Ω/8Ω) modes simultaneously.

• 70V or 100V mode can be assigned to every pair of channels without affecting the number of available output channels.

• The newly developed Double Power Mode function effectively doubles the output power of selected channels.

• Equipped with either YDIF* digital audio format or Audinate’s digital audio network Dante for simple and fast system configuration.

• Easy setting such as the mute on/off or attenuator changes with MTX Editor when used in system with MTX Series.

• An innovative, new, patent pending circuit improves the already highly efficient Class D circuit topology, bringing the efficiency level of

the amplifier's output stage up to over 90%.

• Feature a Power Factor Correction equipped switching power supply, ensuring harmonic control and decreasing the amount of current

draw while maintaining the same output power.

• Powerful, intelligent protection features for more reliable operation.

*YDIF: the newly developed digital transmission format; a unique propriety Yamaha technology that delivers 16ch audio and word clock transmission via standard CAT5 Ether cable.

XMV8280-D

XMV428 0 - D

XMV8140 -D

X MV414 0 - D

2U

2U

GENERAL SPECIFICATIONS

Model XMV8280 XMV8140 XMV8280-D XMV8140-D XMV4280 XMV4140 XMV4280-D XMV4140-D

Output Power

1kHz,

4Ω280W x 8 140W x 8 280W x 8 140W x 8 280W x 4 140W x 4 280W x 4 140W x 4

THD+N = 1%

8Ω280W x 8 140W x 8 280W x 8 140W x 8 280W x 4 140W x 4 280W x 4 140W x 4

4Ω/ Double Power Mode

560W x 4 280W x 4 560W x 4 280W x 4 560W x 2 280W x 2 560W x 2 280W x 2

8Ω/ Double Power Mode

560W x 4 280W x 4 560W x 4 280W x 4 560W x 2 280W x 2 560W x 2 280W x 2

High

100V line 250W x 8 125W x 8 250W x 8 125W x 8 250W x 4 / 40Ω125W x 4 / 80Ω250W x 4 / 40Ω125W x 4 / 80Ω

impedance

70V line 250W x 8 125W x 8 250W x 8 125W x 8 250W x 4 / 20Ω125W x 4 / 40Ω250W x 4 / 20Ω125W x 4 / 40Ω

Voltage Gain RL=8Ω31.7dB 28.7dB 31.7dB 28.7dB 31.7dB 28.7dB 31.7dB 28.7dB

RL=8Ω / Double Power Mode

34.7dB 31.7dB 34.7dB 31.7dB 34.7dB 31.7dB 34.7dB 31.7dB

100V 38.2dB 38.2dB 38.2dB 38.2dB 38.2dB 38.2dB 38.2dB 38.2dB

70V 35.2dB 35.2dB 35.2dB 35.2dB 35.2dB 35.2dB 35.2dB 35.2dB

Input Sensitivity RL=8Ω+4dBu

S/N Ratio

A-weighted

≥ 100dB

Power

Consumption

1/8 power (4Ω pink noise) 450W 250W 450W 250W 250W 150W 250W 150W

Idle (4Ω)73W 73W 73W 73W 37W 37W 37W 37W

Standby 23W 23W 23W 23W 18.5W 18.5W 18.5W 18.5W

THD+N 1kHz, half power ≤ 0.2%

Frequency

Response

RL=8Ω, 100V/70V,

Po=1W, 20Hz - 20kHz

0dB, ±1.0dB

Crosstalk

1kHz, half power, 8Ω, Att. max,

input 150Ω shunt

≤ -60dB

Maximum Input Level +24dBu

Input Impedance 20kΩ (balanced), 10kΩ (unbalanced)

Connectors

Analog Input

Euroblock x 4 (6P, balanced) Euroblock x 2 (6P, balanced)

Digital Input / Output

RJ45 x 2 (YDIF IN / OUT)

RJ45 x 2 (Dante PRIMARY / SECONDARY)

RJ45 x 2 (YDIF IN / OUT)

RJ45 x 2 (Dante PRIMARY / SECONDARY)

Speaker Output

Barrier strip x 8 pairs Barrier strip x 4 pairs

Network

RJ45 x 1 Shared with Dante ports RJ45 x 1 Shared with Dante ports

Remote, Fault Output

Euroblock (3P) x 1 Euroblock (3P) x 1

AC IN

AC Inlet x 1 AC Inlet x 1

Load Protection POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting

Amplifier Protection Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute

(Restored automatically)

Power Supply Protection Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically)

Cooling Fan 3-Speed fan x 2, front-to-back airflow

Power Requirements 100V, 120V, 230V-240V; 50Hz/60Hz

Dimensions (WxHxD) 480 x 88 x 422mm (18.9" x 3.5" x 16.6") 480 x 88 x 422mm (18.9" x 3.5" x 16.6")

Weight 10.1kg (22.3lbs) 8.1kg (17.9lbs)

DIMENSIONS

unit : mm

XMV Series

* Half power = 1/2 power output level

422

88

480

422

88

480

XMV4280 / XMV4140 / XMV4280-D / XMV4140-DXMV8280 / XMV8140 / XMV8280-D / XMV8140-D