Yamaha YHT 17 Quick Connect Connection Diagram YHT17QC
If not then YHT17QC Manual: ://www.yamaha.com/yamahavgn/s/YEC/Home_Theater_Systems/Connection_Diagram/YHT17QC
User Manual: Yamaha YHT-17 Connection Diagram
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
YHT-17 QUICK-CONNECT GUIDE YHT-17 Q U I C K -C O N N E CT G U I D E I NTRODUCTION For the video portion, you will need a DVD player or hi-fi stereo VCR and a television or monitor. Refer to the Yamaha HTR-5230 Owner’s Manual, as well as those that came with your other components, for complete instructions and cautions. Be sure to turn off all power while making connections. Yamaha developed the YHT-17 A/V Home Theater package to turn your home into a theater. In addition to enhancing the sound of a video source, like your TV, DVD, or VCR, the YHT-17 also superbly reproduces audio sources, such as a CD player or a cassette deck. This Quick-Connect Guide will help you get started. Study the speaker system plan (below), and then use the interconnect diagrams (on the following pages) to connect the receiver and speakers to your system. Save this Quick-Connect Guide for future reference. NOTE: Label the end of each speaker wire (i.e., left rear, right front, etc.) before connecting them to the A/V receiver. For wire runs over 30 feet, use larger 18- or 16-gauge speaker wire. T OOLS A ND P ARTS The YHT-17 Home Theater package consists of (1) HTR-5230 A/V receiver with (1) universal remote control, (4) 2-way NS-A16 front/rear speakers, (1) NS-AC16 2-way center-channel speaker, 100' of speaker wire, (1) SW-201 Powered Subwoofer, and related owner’s manuals. You will also need: • Velcro (for secure fastening of NS-AC16 on TV) • Brackets, toggle bolts, molly anchor screws, or sheet metal screws (for securing NS-A16 speakers to walls) NOTE: If you are unsure of how to securely and safely fasten speakers to a wall, please contact a reliable source about the best type of hardware for your particular wall's construction. Secure installation is the purchaser's responsibility. • Wire strippers (optional) S PEAKER S YSTEM P LAN SW-201 Subwoofer (on floor) C NS-A16 NS-A16 Sub (left side, same height as TV) L NS-AC16 (right side, same height as TV) R (on top or below TV) 6'~ 8' apart L = Left Channel R = Right Channel C = Center Channel S = Surround Channel Couch Listening Area S S NS-A16 (on stand or wall, at least ear level or preferably higher) 8'~10' apart NS-A16 (on stand or wall, at least ear level or preferably higher) 1 YHT-17 Q U I C K -C O N N E CT G U I D E C ONNECTING A UDIO C OMPONENTS Yamaha HTR-5230 Receiver (Rear Panel) NOTE: For your convenience, the Yamaha HTR-5230 receiver is equipped with two switched AC outlets (100 W max.). If desired, use them to power on connected components (e.g., CD player or turntable) each time the receiver is turned on. However, do not use them for components equipped with clocks (e.g., VCR). Cassette Deck or MD Recorder * Use Playback Or Line Out ** Use Line In L Out* R Out* L In** R In** CD Player (Changer) L Out Use RCA Audio Cables For Audio Interconnections R Out AUDIO SIGNAL CD RCA Cable Color Codes Yellow = Video White = Left Audio Red = Right Audio 2 L L R R IN OUT (PLAY) (REC) TAPE/MD YHT-17 Q U I C K -C O N N E CT G U I D E C ONNECTING T HE YHT-17 S PEAKERS (B ASIC H OOK -U P ) NS-A16 (Front Right Ch.) SW-201 (Subwoofer) NS-A16 (Front Left Ch.) Subwoofer Wiring POWER ON OFF VOLUME STANDBY-RED ON-GREEN 0 I0 AUTO STANDBY HIGH LOW OFF INPUT2 INPUT1 /MONO FROM AMPLIFIER INPUT1 FROM AMPLIFIER OUTPUT TO SPEAKERS Clear/ Stripe Wire Clear Wire Clear/ Stripe Wire OUTPUT To AC Outlet TO SPEAKERS + Yamaha HTR-5230 A/V Receiver (Rear Panel Speaker Terminals) R − − Main Spkrs. Clear Wire + L Surround Cntr R L + − + − Set IMPEDANCE Selector to right position ❸ RED TERMINAL = (+) ❶ ❷ Clear/Stripe Wire Clear Wire BLK TERMINAL = (–) Clear/Stripe Wire Clear Wire Clear/Stripe Wire Clear Wire ❶ Strip 1 ⁄4 " off ends of speaker wires ❷ Push and hold down levers ❸ Insert speaker wires and release levers Speaker Wiring NS-A16 (Surround Right) NS-AC16 (Center Channel) NS-A16 (Surround Left) 3 YHT-17 Q U I C K -C O N N E CT G U I D E C ONNECTING T HE YHT-17 S PEAKERS (A DVANCED S PEAKER C ONNECTIONS ) NS-A16 (Front Right Ch.) SW-201 (Subwoofer) NS-A16 (Front Left Ch.) Subwoofer Wiring POWER ON OFF VOLUME STANDBY-RED ON-GREEN 0 I0 AUTO STANDBY HIGH LOW OFF INPUT2 /MONO INPUT1 FROM AMPLIFIER OUTPUT TO SPEAKERS INPUT2 Clear/ Stripe Wire Clear Wire /MONO Clear/ Stripe Wire To AC Outlet Clear Wire RCA Audio Cable (not included) + Yamaha HTR-5230 A/V Receiver (Rear Panel Speaker Terminals) R − − Main Spkrs. + L Surround Cntr R L + − + − Set IMPEDANCE Selector to right position ❸ RED TERMINAL = (+) ❶ ❷ Clear/Stripe Wire Clear Wire BLK TERMINAL = (–) Clear/Stripe Wire Clear Wire Clear/Stripe Wire Clear Wire ❶ Strip 1 ⁄4 " off ends of speaker wires ❷ Push and hold down levers ❸ Insert speaker wires and release levers Speaker Wiring NS-A16 (Surround Right) 4 NS-AC16 (Center Channel) NS-A16 (Surround Left) YHT-17 Q U I C K -C O N N E CT G U I D E I NITIAL A DJUSTMENT O F T HE SW-201 S UBWOOFER To achieve the optimum volume balance between the SW-201 Subwoofer and the NS-A16 Main Speakers, perform the following procedure: 1. Insert the SW-201’s power plug into a nearby ac outlet. 2. Set the SW-201’s VOLUME control to 0 (minimum setting), the AUTO STANDBY switch to HIGH, and the HIGH CUT switch to LOW. 3. Press the SW-201’s POWER switch to ON and power on all other components. 4. Play an audio source and adjust the HTR-5230’s VOLUME control to a desired listening level. 5. On the SW-201, increase the volume gradually to adjust the balance the volume between the SW-201 Subwoofer and the NS-A16 Main Speakers. NOTE: Once the volume is balanced between the subwoofer and the main speakers, you can adjust the volume of your whole sound system by using the HTR-5230's VOLUME control. SW-201 Subwoofer (Rear Panel) POWER POWER ON ON OFF VOLUME OFF ❸ VOLUME STANDBY-RED ON-GREEN STANDBY-RED ON-GREEN 0 AUTO STANDBY HIGH LOW OFF 0 I0 I0 HIGH LOW HIGH CUT INPUT2 /MONO AUTO STANDBY HIGH LOW OFF HIGH LOW HIGH CUT INPUT1 FROM AMPLIFIER OUTPUT TO SPEAKERS ❶ ❷ To AC Outlet 5 YHT-17 Q U I C K -C O N N E CT G U I D E C ONNECTING V IDEO C ABLES F OR V IDEO C OMPONENTS Yamaha HTR-5230 Receiver (Rear Panel) NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5230 receiver. Monitor/TV DVD Player (or Video Game) VIDEO SIGNAL VIDEO DVD/LD SAT/D-TV IN OUT VCR Video Out Optional 75-ohm Coaxial Cable ANT In MONITOR OUT Video In Satellite Receiver Video Out Hi-Fi Stereo VCR Video In Video Out ANT Out (RF Out) Use RCA Video Cables And Jacks For Video Interconnections RCA Cable Color Codes Yellow = Video White = Left Audio Red = Right Audio 6 YHT-17 Q U I C K -C O N N E CT G U I D E C ONNECTING A DVD P LAYER Yamaha HTR-5230 Receiver (Rear Panel) OR Digital Audio Out (Coaxial) Digital Audio Out (Optical) Video Out RCA Cable Color Codes V Yellow = Video White = Left Audio Red = Right Audio L R DVD Player Mixed Audio L Out Mixed Audio R Out Use an RCA Video Cable And Jacks For Video Interconnections DVD/LD 7 YHT-17 Q U I C K -C O N N E CT G U I D E C ONNECTING A 5.1-C HANNEL D ECODER If you own a 5.1-channel decoder (or a unit which incorporates a 5.1-channel decoder), you can connect its discrete outputs to the HTR-5230 as shown below. • To hear playback of a stereo or mono audio source or one encoded with Dolby Pro Logic Surround*, connect the unit (e.g., DVD player) to the DVD/LD (or SAT/D-TV) AUDIO SIGNAL input terminals. • The discrete signals feeding to the HTR-5230 cannot be recorded by a tape deck, MD recorder, or VCR. To record programs from a source (e.g., laserdisc player), connect the source unit to the DVD/LD (or SAT/D-TV) AUDIO SIGNAL input terminals. Yamaha HTR-5230 Receiver (Rear Panel) 5.1-Channel Decoder DVD Player DVD/LD EXTERNAL DECODER INPUT MAIN SUR. CNTR. L V Center Out L Subwoofer Out R SUB. Audio L Out Audio R Out R R Surround Out L Surround Out R Main Out L Main Out RCA Cable Color Codes Yellow = Video White = Left Audio Red = Right Audio *Dolby Pro Logic Surround is a trademark of Dolby Laboratories Licensing Corp. 8 Video Out Use an RCA Video Cable And Jacks For Video Interconnections Digital Audio Cable (Optical or Coaxial) YHT-17 Q U I C K -C O N N E CT G U I D E C ONNECTING AUDIO C ABLES F OR V IDEO C OMPONENTS Yamaha HTR-5230 Receiver (Rear Panel) NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5230 receiver. Hi-Fi Stereo VCR Audio L Out DVD or LD Player (or Video Game) Audio L Out Audio R Out Audio R Out Audio L In Audio R In AUDIO SIGNAL L L R DVD/LD R SAT/D-TV IN OUT VCR Audio L Out Satellite Receiver Audio R Out Use RCA Audio Cables And Jacks For Audio Interconnections RCA Cable Color Codes Yellow = Video White = Left Audio Red = Right Audio 9 YHT-17 Q U I C K -C O N N E CT G U I D E C ABLE H OOK -U P (B ASIC A ND P REMIUM C HANNELS ) Yamaha HTR-5230 Receiver (Rear Panel) NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5230 receiver. Hi-Fi Stereo VCR ANT In Basic Cable (From Wall Jack) Video In VIDEO SIGNAL Video Out Audio L Out OR Audio R Out Audio L In RCA Video Cables Audio R In IN VCR OUT L RCA Audio Cables R IN VCR OUT AUDIO SIGNAL Premium Cable (From Wall Jack) Descrambler Hi-Fi Stereo VCR (Tuner set to Channel 3 or 4) Converter Box (Channel 3 or 4 Output) ANT In Video In VIDEO SIGNAL Video Out Audio L Out Audio R Out Audio L In Audio R In RCA Video Cables IN VCR OUT L RCA Audio Cables R IN AUDIO SIGNAL RCA Cable Color Codes Yellow = Video White = Left Audio Red = Right Audio 10 VCR OUT YHT-17 Q U I C K -C O N N E CT G U I D E P ROGRAMMING T HE U NIVERSAL R EMOTE C ONTROL S ETTING U P C OMPONENTS Indicator LED Component Selector Buttons Perform the procedure for each component you own. At the end of each step 5, the remote control’s processor will automatically assign the selected component’s control functions to its own buttons, ready for your use. S ETTING U P Y OUR TV Turns On Component’s Power 2. On the remote control, press TV. Use Keypad To Enter Setup Codes Use To Enter Setup Mode 1. Turn on the television set and look up a setup code for your brand of television (codes are located at the back of the HTR-5230 Owner’s Manual). Use To Enter Setup Mode 3. Press and hold both VOLUME buttons at least four seconds until the indicator LED flashes twice. 4. Using the keypad, enter the four-digit setup code. The indicator LED will flash twice after your entry. If the LED did not flash twice, repeat steps 3 and 4. The YHT-17 Home Theater package includes a universal remote control. It comes pre-programmed with factory codes to control your HTR-5230 receiver and most Yamaha audio components. To program other brands of components (i.e., TV, VCR, etc.) or if your Yamaha unit does not respond, you will need to program the remote control with the manufacturer’s codes (listed on the back pages of the HTR-5230 Owner’s Manual). NOTE: The universal remote control is designed to control most major brands of audio and video components. For other units, use the original remote control supplied with the product. P OWER O N 1. Load the supplied batteries into the remote control. 5. To verify the code works, aim the remote control at the television set, press TV, and then press POWER. The television set should turn off. If it doesn’t respond, use another code for the same manufacturer and repeat steps 3 through 5. 2. Aim the remote control at the receiver, press AMP/ TUNER, and then press POWER. 3. The receiver should turn on. 11 YHT-17 Q U I C K -C O N N E CT G U I D E P ROGRAMMING T HE U NIVERSAL R EMOTE C ONTROL (C ONTINUED ) S ETTING U P Y OUR C ABLE B OX ( OR DSS) S ETTING U P Y OUR DVD ( OR LD) P LAYER 1. Turn on the cable box (or DSS) and look up a setup code for your brand of cable box (or DSS) (codes are located at the back of the HTR-5230 Owner’s Manual). 1. Turn on the DVD (or LD) player and look up a setup code for your brand of DVD (or LD) player. 2. On the remote control, press DVD/LD. 2. On the remote control, press CBL/SAT. 3. Press and hold both VOLUME buttons at least four seconds until the indicator LED flashes twice. 4. Using the keypad, enter the four-digit setup code. The indicator LED will flash twice after your entry. If the LED did not flash twice, repeat steps 3 and 4. 5. To verify the code works, aim the remote control at the cable box (or DSS), press CBL/SAT, and then press POWER. The unit should turn off. If it doesn’t respond, use another code for the same manufacturer and repeat steps 3 through 5. S ETTING U P Y OUR VCR 1. Turn on the VCR and look up a setup code for your brand of VCR. 2. On the remote control, press VCR. 3. Press and hold both VOLUME buttons at least four seconds until the indicator LED flashes twice. 4. Using the keypad, enter the four-digit setup code. The indicator LED will flash twice after your entry. If the LED did not flash twice, repeat steps 3 and 4. 5. To verify the code works, aim the remote control at the DVD (or LD) player, press DVD/LD, and then press POWER. The unit should turn off. If it doesn’t respond, use another code for the same manufacturer and repeat steps 3 through 5. S ETTING U P O THER C OMPONENTS 1. Turn on the component (e.g., CD player, tape deck, or MD player) and look up a setup code for your brand of component. 2. On the remote control, press the desired component button (e.g., CD or TAPE/MD). 3. Press and hold both VOLUME buttons at least four seconds until the indicator LED flashes twice. 4. Using the keypad, enter the four-digit setup code. The indicator LED will flash twice after your entry. If the LED did not flash twice, repeat steps 3 and 4. 3. Press and hold both VOLUME buttons at least four seconds until the indicator LED flashes twice. 4. Using the keypad, enter the four-digit setup code. The indicator LED will flash twice after your entry. If the LED did not flash twice, repeat steps 3 and 4. 5. To verify the code works, aim the remote control at the VCR, press VCR, and then press POWER. The VCR should turn off. If it doesn’t respond, use another code for the same manufacturer and repeat steps 3 through 5. 12 5. To verify the code works, aim the remote control at the component, press the appropriate component button, and then press POWER. The unit should turn off. If it doesn’t respond, use another code for the same manufacturer and repeat steps 3 through 5. YHT-17 Q U I C K -C O N N E CT G U I D E O PERATING T HE UNIVERSAL R EMOTE C ONTROL O VERVIEW R ESETTING THE R EMOTE C ONTROL TO F ACTORY C ODES The universal remote control will control up to seven different types of components (including the HTR-5230 receiver), each of which becomes active when you press a selection (e.g., TV, VCR, etc.). We can only briefly describe some functions here, and we encourage you use the HTR-5230 Owner’s Manual to gain additional experience with this powerful unit. You can reset the remote control to factory codes for all components or a desired component, as follows: P LAYING A V IDEOCASSETTE R ESETTING C ODES F OR A LL C OMPONENTS 1. Press any component selector button other than AMP/TUNER. 2. Press and hold both VOLUME buttons at least four seconds until the indicator LED flashes twice. 1. Aim the remote control at the HTR-5230, press AMP/TUNER to select the component, and then press POWER to turn the receiver on. Press VCR (i.e., 6 on the keypad) as the input for the receiver. 3. Using the keypad, enter the code “9990”. 2. Aim the remote control at the TV, press the TV to select the component, and then press POWER to turn the television on. Press TV INPUT (or A/B) to select the correct input. R ESETTING C ODES F OR A D ESIRED C OMPONENT 3. Aim the remote control at the VCR, press VCR to select the component, and then press POWER to turn the VCR on. Put a tape in the VCR, press PLAY. NOTE: At this point, the VCR controls are assigned to the remote control, since VCR was the last selected component. If you now press the VOLUME up (down) buttons, the TV/VCR volume will be raised (or lowered). To adjust the receiver’s volume, you must press AMP/TUNER to activate its functions. P LAYING A DVD 1. Aim the remote control at the HTR-5230, press AMP/ TUNER to select the component, and then press POWER to turn the receiver on. Press DVD/LD (i.e., 4 on the keypad) as the input for the receiver. NOTE: If the DVD player is connected to an external decoder, press EXT.DEC. (i.e., 9 on the keypad) as the input for the receiver. 4. The indicator LED will flash twice to confirm all codes have been reset to factory values. If the LED does not flash twice, repeat steps 1 through 3. 1. Press a component selector button that matches the component you wish to reset to factory codes. 2. Press and hold both VOLUME buttons at least four seconds until the indicator LED flashes twice. 3. Using the keypad, enter the code “0000”. 4. The indicator LED will flash twice to confirm all codes have been reset to factory values. If the LED does not flash twice, repeat steps 1 through 3. 5. For your convenience, the following reference chart lists the factory codes: Component Selector Button Component Code TV CBL/DBS VCR DVD/LD CD TAPE/MD TV DBS tuner VCR DVD player CD player Tape deck 0101 0006 0002 0008 Yamaha 0005 Yamaha 0004 Yamaha 2. Press DVD/LD and then press POWER to turn the DVD (or LD) player on. NOTE: If the DVD player is plugged into the switched ac outlet (on the back of the receiver) and its power switch was already engaged, the unit will come on each time the receiver is powered on. 3. Load a DVD (or LD) into the DVD (or LD) player. 4. Aim the remote control at the DVD (or LD) player, and press > (forward button) to start play. NOTE: The DVD player’s controls are now assigned to the remote control buttons, since DVD was the last selected component. 13 ©2000 YAMAHA ELECTRONICS CORPORATION, USA 6660 Orangethorpe Avenue, Buena Park, CA 90620 PH: (714) 522-9105; FAX: (888) 435-7922 http://www.yamaha.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2000:03:09 20:11:18 Producer : Acrobat Distiller 4.0 for Macintosh Author : Roman Creator : Adobe¨ PageMaker¨ 6.5: AdobePS 8.5.1 Title : YHT-17 Quick-Connect Modify Date : 2001:05:31 10:38:41-07:00 Page Count : 16EXIF Metadata provided by EXIF.tools