Yamaha YSP 4100 Quick Reference Guide
YSP-5100 Quick Reference Guide YSP-5100_QuickReferenceGuide
User Manual: Yamaha YSP-4100 Quick Reference Guide
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
English Quick Reference Guide for North America This Quick Reference Guide explains steps to connect external components to this unit and start playback. For detailed operation, refer to the “Owner’s Manual” in the supplied CD-ROM. Check that you received all of the supplied accessories referring to “Supplied accessories” (page 6 of “Safety and Accessory Information” (separate booklet)). For instructions on how to operate or set the external components, refer to the owner’s manual supplied with each component. 1 Installing this unit Decide where to install this unit. This unit uses sound beams to create surround effects (the arrows in the following diagrams indicate the images of paths of 5-channel sound beams). To achieve desired surround sound effects, install this unit where there are no objects such as furniture obstructing the path of sound beams. When installing this unit parallel to the wall When installing this unit in the corner of a room 40° to 50° Front left channel Front left channel Center channel Center channel Front right channel Front right channel Surround left channel Surround left channel Surround right channel Surround right channel : Object such as furniture : Object such as furniture Attach the stands. When installing this unit using a rack Attach the supplied stands to this unit as shown below. Make sure that you attach the left and right stands correctly. These stands are unnecessary if you use the optional wall mount bracket. When installing this unit, be careful not to scratch this unit, rack or floor. Depending on your installation environment, connections with external components (next step) should be done before installation. Right stand (supplied) Left stand (supplied) INPUT VOLUME INTELLIBEAM Screws (for stands, supplied) –– MIC 2 Connecting external components to this unit Connect your TV and Blu-ray disc player to this unit. The rear panel illustration shows jacks and their names to help you find them easily. They are not exactly the same as the ones on the actual rear panel of this unit. Do not plug the power cable into an AC wall outlet until all connections are complete. This example shows a way to make the most of the capability of this unit. You can enjoy Blu-ray disc audio and video with higher quality via the HDMI cable. In addition, by inputting TV sounds to this unit through the optical cable, you can enjoy multi-channel audio from the TV. Example - A TV Blu-ray disc player HDMI output Optical digital output HDMI input OUT 3 HDMI IN 1 1 1. Pull out the cap (if attached) 2 IN 2 IN 3 2. Check the direction IN 4 This unit COMPONENT SUB WOOFER SIRIUS SYSTEM CONNECTOR 4 IN OUT VIDEO AUX 1 TV AUDIO IN AUX 2 AUX 1 Do not plug the power cable into an AC wall outlet until all connections are complete. TV DIGITAL IN IR IN RS-232C To AC wall outlet System connection (supplied with Yamaha subwoofer) Audio connection • If you make a system connection, the power of the subwoofer automatically changes in conjunction with the power of this unit (Yamaha subwoofer). • If you connect a subwoofer by wireless, refer to “Wireless connection for subwoofer” described in the right section. Subwoofer Connect cables in the order of the circled numbers. Supplied Sold separately 1 Optical cable (to play back TV digital sounds on this unit) 2 HDMI cable (to display the Blu-ray disc video and this unit’s menu screen on the TV) 4 Power cable 3 HDMI cable (to input the digital audio/video signals of the Blu-ray disc to this unit) y If you connect this unit to an HDMI control-compatible TV (except some models) via HDMI, you can use the remote control supplied with your TV to turn on or off the power, select the audio output component, and adjust the volume level of this unit. For details, see “Using the HDMI control function” of “Owner’s Manual” (on the supplied CD-ROM). –– 2 Connecting external components to this unit These examples show ways to connect additional components (such as a tuner or game console), a subwoofer by wireless, and an indoor FM antenna. Do not plug the power supply cable into an AC wall outlet until all connections are complete. Example - a This example shows a way to make the most of the capability of this unit. Connect your external component to This example shows a way to connect your external component using the AUX1 (optical digital or stereo analog) Example - b one of the HDMI IN jacks of this unit. and VIDEO IN jacks. Tuner, game console, etc. Analog audio output Component video output Tuner, game console, etc. Coaxial digital output R L HDMI OUTPUT Video pin cable Audio pin cable (sold separately) (sold separately) OUT HDMI Optical cable (sold separately) IN 1 IN 2 COMPONENT HDMI cable (sold separately) SUB WOOFER SIRIUS IN 3 IN OUT AUX 1 VIDEO Wireless connection for subwoofer TV TV COMPONENT VIDEO IN jacks. Tuner, game console, etc. refer to “Safety and Accessory Information” (separate booklet). VOLUME AUX 1 DIGITAL IN This example shows a way to connect your external component using the AUX2 (coaxial digital) and Example - c This shows a way to connect a subwoofer by using the Yamaha wireless subwoofer kit (SWK-W10). For instructions on SWK-W10, INPUT AUX 2 AUDIO IN Component video output Coaxial digital output INTELLIBEAM MIC Component video pin cable (sold separately) Subwoofer Digital audio pin cable (supplied) SWK-W10 COMPONENT SUB WOOFER SIRIUS y For proper transmission, you need to set the group IDs of this unit and SWK-W10 to the same value. For the Group ID setting of this unit, refer to “WIRELESS SETUP” of “Owner’s Manual” (supplied CD-ROM). IN VIDEO Connecting the FM antenna Connect the supplied FM antenna. FM antenna (supplied) FM ANTENNA –– OUT AUX 1 TV AUDIO IN AUX 2 AUX 1 DIGITAL IN TV 2 Connecting external components to this unit This example shows a way to connect a TV and Blu-ray disc player using the supplied cables. You can enjoy the multi-channel audio from the Blu-ray disc player and the analog/digital audio from the TV. Use the video pin cable supplied with your Blu-ray disc player to make a video connection between your Blu-ray disc player and this unit. Example - B Connect cables in the order of the circled numbers. TV Blu-ray disc player Video input Analog audio Optical digital output output R 1 L Video input Video output 2 Video connection 2 1 COMPONENT IN VIDEO 4 1. Pull out the cap (if attached) SUB WOOFER SIRIUS OUT AUX 1 TV AUX 2 AUDIO IN SYSTEM CONNECTOR AUX 1 DIGITAL IN Audio connection 2. Check the direction TV IR IN 1 Video pin cable (to display this unit’s menu screen on the TV) 2 Audio pin cable (to play back TV analog sounds on this unit) Coaxial digital output 3 Supplied RS-232C System connection (supplied with Yamaha subwoofer) 3 Optical cable (to play back TV digital sounds on this unit) 4 Digital audio pin cable (to input digital audio signals of the Blu-ray disc to this unit) 5 Power cable Subwoofer • If you make a system connection, the power of the subwoofer automatically changes in conjunction with the power of this unit (Yamaha subwoofer). • If you connect a subwoofer by wireless, refer to “Wireless connection for subwoofer” described in the left section. This unit 5 To AC wall outlet Do not plug the power cable into an AC wall outlet until all connections are complete. 3 Preparing the remote control Install batteries in the remote control. Operation range Make sure you insert the batteries according to the polarity markings (+/–). Pull the tab INPUT VOLUME INTELLIBEAM MIC Within 6 m (20 ft) 30° 30° ユニボリューム 1 4 デコーダー 2 5 7 8 10/0 11/+10 インテリビーム 3 6 9 12 コードセット 地デジ 地アナ BS CS D 音声多重 –– Remote control 4 Carrying out the AUTO SETUP (IntelliBeam) Carry out the AUTO SETUP to adjust the settings so that the best listening environment is created. The IntelliBeam technology allows you to achieve sound adjustments that best match your listening environment. It is normal for loud test tones to be output during the AUTO SETUP procedure. Make sure that there are no children around in the listening room while the AUTO SETUP procedure is in progress. 1 Connect the supplied IntelliBeam microphone to the INTELLIBEAM MIC jack on the front panel. If necessary, use the supplied cardboard microphone stand. Assemble the stand and place the IntelliBeam microphone on top of it horizontally as shown below. 1 INPUT VOLUME 2 3 4 5 INTELLIBEAM MIC INTELLIBEAM MIC IntelliBeam microphone (supplied) Cardboard microphone stand (supplied) 2 Set the IntelliBeam microphone at your normal listening position. Use the supplied cardboard microphone stand or a tripod to place the IntelliBeam microphone at the same height as your ears would be when you are seated. Place the IntelliBeam microphone on the extended center line of this unit and 1.8 m (6.0 ft) or more away from it. Also, make sure place the IntelliBeam microphone within 1 m (3.3 ft) upper or lower from the center height of this unit. IntelliBeam microphone Center height of this unit Upper limit Within 1 m (3.3 ft) Within 1 m (3.3 ft) Cardboard microphone stand 1.8 m (6.0 ft) or more 3 Center line Cardboard microphone stand Listening position Lower limit 4 Press the Power ( ) key on the remote control. The power of this unit turns on. If a subwoofer with adjustable volume and crossover frequency controls is connected to this unit, turn it on, set the volume to about half way and then set the crossover frequency to the maximum as shown below. TV CROSSOVER/ HIGH CUT AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 MIN MAX MIN Turn on the power of your TV and select this unit as the video input on your TV. If this unit is connected to the HDMI input on the TV (as shown in “Example - A”), switch the video input to “HDMI”. If this unit is connected to the video input 1 on the TV (as shown in “Example - B”), switch the video input to “1”. Subwoofer VOLUME IntelliBeam microphone MAX –– 4 Carrying out the AUTO SETUP (IntelliBeam) 5 9 Press and hold INTELLIBEAM for more than 2 seconds. The INTELLIBEAM key is located inside of the slide cover. Press ENTER. The following screen appears on the TV for 2 seconds and then the menu screen disappears from the TV. CINEMA DSP SURROUND UNIVOLUME 6 SUR. DECODE INTELLIBEAM 1 2 3 4 5 6 7 8 9 AUTO SETUP COMPLETE Please connect the MIC. Please place the MIC at least 1.8m/6ft away from the unit. The MIC should be set at ear level when seated. Measurement takes about 3min. After [ENTER] is pressed, please leave the room. [ENTER]:Start [RETURN]:Cancel Please remove the MIC from the unit and the listening position. ENTER TOP MENU 10 Make sure that your listening room is as quiet as possible. MENU Disconnect the IntelliBeam microphone. Now the AUTO SETUP is complete. Keep the IntelliBeam microphone in a safe place. The settings are automatically saved in the system memory. For accurate measurement, turn off air conditioner or other devices that make noises. 7 STEREO AUTO SETUP PREPARATION & CHECK Prepare to leave the room. INPUT The best setting may not be done if you are in the room. Prepare to leave the room in 10 seconds after pressing ENTER in step 8. VOLUME INTELLIBEAM MIC INTELLIBEAM MIC y • • • • When leaving the room, bring this Quick Reference Guide with you. Wait outside the room during the AUTO SETUP procedure. The AUTO SETUP procedure takes about 3 minutes. To cancel the AUTO SETUP procedure after it is started, press RETURN. 8 Press ENTER to start the AUTO SETUP procedure and then leave the room within 10 seconds. 5 Checking digital audio input You can check the digital signals being input from the Blu-ray disc player through the digital connection (HDMI, optical, coaxial) by using the supplied demonstration DVD. CINEMA DSP SURROUND 1 STEREO AUTO SETUP START Will begin in 10sec Please leave the room ENTER *-------[RETURN]:Cancel TOP MENU MENU The setup screen automatically changes during the AUTO SETUP procedure. When the AUTO SETUP procedure is complete, the “SHOW RESULT” screen appears on the TV. SHOW RESULT Press HDMI1-4 or AUX1/2 to select the Blu-ray disc player as the input source and start playback of the demonstration DVD. TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod RADIO ENTER MEASUREMENT COMPLETE BEAM MODE :5Beam/Plus2 SUBWOOFER :YES 2 [ENTER]:Save set-up. [RETURN]:Do not save set-up. If “ENVIRONMENT CHECK (FAILED)” is displayed, see “Error massages for AUTO SETUP” of “Owner’s Manual” (on the supplied CD-ROM) and then run the procedure again. Check whether the q DIGITAL indicator lights up. q DIGITAL y y • The result may differ depending on the environment. • If any error occurs, the corresponding error message appears on the screen. In this case, see “Error massages for AUTO SETUP” of “Owner’ s Manual” (on the supplied CD-ROM). • If the indicator does not light up, check the setting for digital audio output on the player. For details, see “Using the supplied demonstration DVD” (page 7 of “Safety and Accessory Information” (separate booklet)). –– Basic playback operations Playing back audio signals Enjoying Blu-ray discs in surround sound Enjoying TV in surround sound 1 Select the Blu-ray disc player as the video input on your TV. 1 Select the desired TV channel. 2 1) Press HDMI1-4 or AUX1/2 to select the Blu-ray disc player as the input source. 2 Press TV to select the TV as the input source. For example, if the Blu-ray disc player is connected to the HDMI IN 1 jack of this unit (as shown in “Example - A”), press HDMI1. TV TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod RADIO ENTER AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod RADIO ENTER 2) Start playback of a Blu-ray disc. 3 4 Press VOLUME +/- to adjust the volume. TV VOL CH VOLUME If the TV speakers output sounds, mute it. TV TV MUTE INPUT TV AV MUTE Press SURROUND and then the CINEMA DSP keys to select the desired CINEMA DSP program. Each time you press the CINEMA DSP key, program switches. For details on each program, see “Enjoying CINEMA DSP programs” of “Owner’s Manual” (on the supplied CD-ROM). To turn off the CINEMA DSP program, press OFF. TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 iPod RADIO HDMI 4 MOVIE MUSIC ENTER TAINMENT OFF CINEMA DSP SURROUND –– STEREO Playing back audio signals Playing back iPod/iPhone 1 FM tuning 1 Prepare your iPod/iPhone and the Yamaha wireless transmitter for iPod (PDX-50TX/ PDX-50BC). Press RADIO repeatedly to select “FM”. TV For instructions on PDX-50TX/PDX-50BC, refer to “Safety and Accessory Information” (separate booklet). AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 iPod RADIO HDMI 4 MOVIE MUSIC ENTER TAINMENT OFF CINEMA DSP 2 Start play back of your iPod/ iPhone. INPUT VOLUME XXXXFMX88.9XMHz INTELLIBEAM MIC 2 MENU Press TUNING / . Frequency is changed. y UNIVOLUME • For proper transmission, you need to set the group IDs of this unit and PDX-50TX to the same value. For the Group ID setting of this unit, refer to “WIRELESS SETUP” of “Owner’s Manual” (supplied SUR. DECODE INTELLIBEAM TUNING PRESET 1 2 CATEGORY 3 INFO 4 MEMORY 5 SLEEP 6 CD-ROM). XXXXFMX92.5XMHz Using the audio functions of this unit Selecting surround or stereo playback Adjusting volume level automatically (UNIVOLUME) Press SURROUND or STEREO. Press UNIVOLUME. You can enjoy stereoscopic sound field with surround playback and hi-fi sound with stereo playback. You can limit the volume level of the TV so that it will not increase suddenly when whenever the contents being broadcast change (due to commercials, etc.). The UNIVOLUME key is located inside of the slide cover. CINEMA DSP SURROUND STEREO UNIVOLUME ENTER TOP MENU ©2009 Yamaha Corporation All rights reserved. MENU –– SUR. DECODE INTELLIBEAM 1 2 3 4 5 6 7 8 9 YC174A0/QREN1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Tagged PDF : No XMP Toolkit : 3.1-702 Modify Date : 2010:01:12 16:47:02-08:00 Create Date : 2009:09:09 11:26:44+09:00 Metadata Date : 2010:01:12 16:47:02-08:00 Creator Tool : Adobe Acrobat Pro 9.1.3 Format : application/pdf Document ID : uuid:14e7e51c-2ca7-4adf-9c5c-7b9c89ba4679 Instance ID : uuid:5742417b-5da2-42db-b030-ffdc20a3bdae Producer : Adobe Acrobat Pro 9.1.3 Has XFA : No Page Count : 8 Creator : Adobe Acrobat Pro 9.1.3EXIF Metadata provided by EXIF.tools