Yamaha Ysp 2200 Users Manual

2015-01-26

: Yamaha Ysp-2200-Users-Manual yamaha-ysp-2200-users-manual-360732 yamaha pdf

Open the PDF directly: View PDF .
Page Count: 59

Download
Open PDF In Browser	View PDF

(YSP-CU2200 + NS-SWP600)
Digital Sound Projector™

OWNER’S MANUAL
English

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
2

3
4

7
8
9
10
11
12

To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install this unit in a well ventilated, cool, dry, clean place –
away from direct sunlight, heat sources, vibration, dust,
moisture, and/or cold. For proper ventilation, allow the
following minimum clearances.
Top : 5 cm (2 in)
Rear: 5 cm (2 in)
Sides: 1 cm (13/32 in)
Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in an environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
Avoid installing this unit where foreign object may fall onto
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall and
liquid may cause electrical shock to the user and/or
damage to this unit.
Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
Do not plug in this unit to a wall outlet until all connections
are complete.
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
Do not use force on switches, knobs and/or cords.
When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and
may cause fire, damage to this unit, and/or personal injury.
Yamaha will not be held responsible for any damage resulting
from use of this unit with a voltage other than specified.
To prevent damage by lightning, keep the power cable
disconnected from a wall outlet or this unit during a lightning
storm.
Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The
cabinet should never be opened for any reasons.
When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this unit is
faulty.
Before moving this unit, press p to set this unit to the
standby mode, and disconnect the AC power plug from the
wall outlet.
Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power cable from the
outlet, then leave this unit alone.

i En

19 When using this unit for a long time, this unit may become
warm. Turn the power off, then leave this unit alone for
cooling.
20 Install this unit near the AC outlet and where the AC power
plug can be reached easily.
21 The batteries shall not be exposed to excessive heat such as
sunshine, fire or the like. When you dispose of batteries,
follow your regional regulations.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING
THE POWER SUPPLY CABLE OF THIS UNIT MUST BE
CONNECTED TO THE MAIN SOCKET OUTLET VIA A
PROTECTIVE EARTHING CONNECTION.

This unit is not disconnected from the AC power source as long as
it is connected to the wall outlet, even if this unit itself is turned off
by p. This state is called the standby mode. In this state, this unit
is designed to consume a very small quantity of power.

■ For U.K. customers

■ Notes on remote controls and batteries

If the socket outlets in the home are not suitable for the plug supplied
with this appliance, it should be cut off and an appropriate 3 pin plug
fitted. For details, refer to the instructions described below.

• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following conditions:

Note
The plug severed from the mains lead must be destroyed, as a plug
with bared flexible cord is hazardous if engaged in a live socket outlet.

■ Special Instructions for U.K. Model
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of
the three pin plug.

–
–
–
–

places of high humidity, such as near a bath
places of high temperatures, such as near a heater or stove
places of extremely low temperatures
dusty places

• Insert the battery according to the polarity markings (+ and -).
• Change all batteries if you notice the following conditions: the
operation range of the remote control narrows or the transmit
indicator does not flash or is dim.
• If the batteries run out, immediately remove them from the remote
control to prevent an explosion or acid leak.
• If you find leaking batteries, discard the batteries immediately,
taking care not to touch the leaked material. If the leaked material
comes into contact with your skin or gets into your eyes or mouth,
rinse it away immediately and consult a doctor. Clean the battery
compartment thoroughly before installing new batteries.
• Do not use old batteries together with new ones. This may shorten
the life of the new batteries or cause old batteries to leak.
• Do not use different types of batteries (such as alkaline and
manganese batteries) together. Specification of batteries may be
different even though they look the same.
• Before inserting new batteries, wipe the compartment clean.
• Dispose of batteries according to your regional regulations.

1ii En

What you can do with this unit
PREPARATION

To enjoy Blu-ray
movies

To enjoy TV

To enjoy games

Checking supplied accessories (p. 4)
Installation (p. 9)
Preparing the remote control (p. 13)

CONNECTION/
INITIAL SETTINGS

Connecting your TV and Blu-ray disc player (p. 14)

When enjoying STB program
such as on satellite/CATV tuner
(p. 15)

Connecting a game
console (p. 15)

Setting the best possible sound automatically (p. 17)

Operating the unit by TV’s remote control (p. 24)

PLAYBACK

Playing back a TV, Blu-ray disc player, and game console (p. 26)

HDMI link (HDMI control)
function
p. 24

Cinema DSP function
p. 28

IntelliBeam function
p. 17

UniVolume
p. 27

2 En

Playing back iPod/iPhone
p. 33

Contents
Getting started ....................................................... 4
Supplied accessories .................................................... 4

Controls and functions.......................................... 5

CONNECTION/INITIAL SETTINGS
Remote control preparation......................................... 13
Subwoofer connection................................................. 13

Pairing ................................................................................ 35
Connecting ......................................................................... 35

SETTINGS
Setup menu...........................................................36
Setting procedure ........................................................ 36
Setup menu list............................................................ 37
Manual setup............................................................... 38
Setting parameters ........................................................... 38
Beam adjustment .............................................................. 39

Connections ......................................................... 14

Image location .................................................................. 40

TV and Blu-ray disc player connection........................ 14

Tone control ................................................................ 40

Game console or tuner connection ............................. 15

Tone control...................................................................... 40

Initial settings....................................................... 16

Subwoofer settings ........................................................... 40

Auto setup for appropriate surround effects
(IntelliBeam)................................................................ 17
Operating the unit by TV’s remote control................... 24

PLAYBACK
Playback features ................................................ 26
Basic operation for playback ....................................... 26
Switching stereo/surround sound ....................................... 27
Playing back digitally compressed formats (MP3, WMA, etc.)
with enriched sound (Compressed Music Enhancer)......... 27

Dynamic range control ...................................................... 41
Volume level of each channel with test tones ................... 41

Sound out setting ........................................................ 41
Sound beam output configuration ..................................... 41

Input assignment ......................................................... 42
Input assignment .............................................................. 42
Input rename..................................................................... 43
HDMI setup....................................................................... 43
DISPLAY MENU ............................................................... 44

Advanced setup ...................................................45

TROUBLESHOOTING

SETTINGS

Enjoying sound with your preference .......................... 27

Audio delay control ........................................................... 40

PLAYBACK

Selecting language for menu display .......................... 16

CONNECTION/
INITIAL SETTINGS

Installation and Connection.................................. 9

Playing back Bluetooth components ........................... 35

PREPARATION

Automatic volume level adjustment (UniVolume)............... 27
Volume balance adjustment ............................................... 27

Troubleshooting ...................................................46

Enjoying realistic surround sound (CINEMA DSP)............. 28

APPENDIX

Surround decoder setting ................................................... 31

Glossary ................................................................50

Using useful features .................................................. 32

Specifications .......................................................52

Sleep timer/auto power down function ............................... 32
Settings for each input source (Option menu).................... 32

Using the supplied demonstration DVD.............54

Playing back iPod/iPhone ........................................... 33

Index ......................................................................55

TROUBLESHOOTING

Changing the audio output method for surround playback
........................................................................................... 29

When using Yamaha Universal Dock for iPod (optional
YDS-12, etc.)...................................................................... 34

APPENDIX

When using Wireless System for iPod (optional YID-W10)
........................................................................................... 34

About this manual
• In this manual, operations that can be performed using either the front panel buttons or the remote control are explained using the
remote control.
• y indicates a tip for your operation.
• Notes contain important information and operating instructions.
• This manual is produced prior to production. Design and specifications are subject to change in part as a result of improvements,
etc. In case of differences between the manual and the product, the product has priority.
• The alphabet mark (such as
) indicates the remote control key(s) indicated on the figure on the left page.

3 En

PREPARATION

Getting started
Supplied accessories
Before connecting, make sure you have received all of the following items.1)

Units
Center unit (YSP-CU2200)

Subwoofer (NS-SWP600)

Accessories
Remote control

IntelliBeam microphone
(6 m (19.7 ft))

Non-skid pad for center
unit (×4)

Battery (× 2)
(AA, R6, UM-3)

Optical cable
(1.5 m (4.9 ft))

Cardboard microphone
stand

Quick Reference Guide

According to the connection, the supplied cables may not be needed.

4 En

IR Flasher
(1 m (3.3 ft))

Digital audio pin cable
(1.5 m (4.9 ft))

Stand for
subwoofer (×4)

Demonstration DVD
(☞p. 54)

Video pin cable
(for displaying menu
and iPod video)
(1.5 m (4.9 ft))

Speaker cable
(3 m (9.8 ft))

Safety and Accessory
Information

Controls and functions
PREPARATION

Controls and functions
Front panel
23

45 6

9
CONNECTION/
INITIAL SETTINGS

4 INTELLIBEAM jack

Shows information about the operational status of this unit.
(☞p. 7)

Connect the supplied IntelliBeam microphone for AUTO SETUP
(☞p. 17).

2 SURROUND indicator

5 Remote control sensor

Lights up according to the input signal.

Receives infrared signals from the remote control. (☞p. 8)

Displayed
color

6 Remote control sensor of a TV

Input signal
Following surround audio signal formats:
Dolby TrueHD, Dolby Digital Plus, DTS-HD
Master Audio, DTS-HD High Resolution, Multichannel Linear PCM

Orange

Surround audio signal other than above

Off

Audio signal other than above or no signal

3 STATUS indicator

Receives infrared signals from the remote control of your TV
when connecting the IR Flasher. (☞p. 10)

7 INPUT key
Selects playback component. (☞p. 15)

8 VOLUME +/- key
Controls the volume of the unit. (☞p. 26)

key

Turns on the unit or set it to the standby mode.

Green
Red

Off

Power

HDMI
CONTROL
(☞p. 43)

Interlock
Mode
(☞p. 34)

–

Standby

–

Standby

–

Standby

Off

Note
In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control or to search for HDMI signals.

TROUBLESHOOTING

Lights up to show the system condition.
Light

SETTINGS

Blue

PLAYBACK

1 Front panel display

APPENDIX

5 En

Controls and functions

Rear panel

3 4 5

6 7

1 AUDIO INPUT 3 jack

6 OPTICAL digital input 1 jack

For connecting analog cable to the external components.
(☞p. 15)

For connecting optical cable to the external components.
(☞p. 15)

2 DOCK terminal

7 OPTICAL digital input TV jack

For connecting optional Yamaha Universal Dock for iPod,
Wireless System for iPod/iPhone, and Bluetooth Wireless Audio
Receiver. (☞p. 33, 35)

For connecting optical cable to the TV. (☞p. 14)

3 VIDEO OUT jack
For connecting video input jack of TV to display the YSP-2200’s
setup menus on your TV or to play back video in iPod/iPhone.
(☞p. 14)

4 IR output jack
For connecting IR Flasher (supplied). (☞p. 11)

8 HDMI OUT (ARC) jack
For connecting HDMI compatible TV and external components.
(☞p. 14)

9 HDMI IN jack
For connecting HDMI compatible Blu-ray disc player, tuner and
game console. (☞p. 14, 15)

0 Subwoofer output terminal

5 COAXIAL digital input 2 jack

For connecting the speaker cable (supplied) to subwoofer.
(☞p. 14)

For connecting digital audio pin cable to the external
components. (☞p. 15)

a Power cable

6 En

For connecting to an AC wall outlet. (☞p. 14)

Controls and functions
PREPARATION

Front panel display
1

CONNECTION/
INITIAL SETTINGS

5
4 VOL indicator

Lights up when HDMI signal is input.

Indicates the current volume level. (☞p. 26)

2 SLEEP indicator

5 Multi information display

Lights up when the sleep timer is set. (☞p. 32)

Displays information in alpha-numeric values.
Displays playback components and current sound output when
power is on.

3 CINEMA DSP indicator
Lights up when a sound field program is selected (☞p. 28).

PLAYBACK

1 HDMI indicator

SETTINGS
TROUBLESHOOTING
APPENDIX

7 En

Controls and functions

Remote control
Infrared signal transmitter

CINEMA DSP program keys
When playback is in surround sound, select the CINEMA DSP
programs (☞p. 28).

SURROUND key
Switches to surround playback. (☞p. 28)

STEREO key
Switches to stereo playback. (☞p. 27)

Input selector keys
Select playback component. (☞p. 26)

INFO key
Switches the information display on the front panel as follows.
• Input/Output: Input name/surround mode
• DSP Program: Sound field program of CINEMA DSP (only
when using CINEMA DSP)
• Audio Decoder: Sound signal decoder currently selected

SETUP key
Displays the setup menu. (☞p. 36)

(Y) key,

MENU (U) key, ENTER key,
(Z) key,
(V) key

• Change the setting. (☞p. 36)
• Operate iPod.

DOCK key
Selects iPod/iPhone or Bluetooth component. (☞p. 33, 35)

RETURN key
Returns to the previous menu screen.

SUBWOOFER (+/-) key
Adjusts the volume balance of subwoofer.

SLEEP key
Sets the sleep timer. (☞p. 32)

key
Turns on the unit or set it to the standby mode. (☞p. 26)

UNIVOLUME key
Turns UniVolume mode to on/off. (☞p. 27)

ENHANCER key
Turns Compressed Music Enhancer to on/off. (☞p. 27)

OPTION key
Displays option menu for each input source. (☞p. 32)

S/T key
Operate iPod wheel. (☞p. 33).

VOLUME (+/-) key
Controls the volume of the unit. (☞p. 26)

MUTE key
Mute the sound. (☞p. 26)

CH LEVEL key
Adjusts the volume balance during playback. (☞p. 27)

8 En

CONNECTION/INITIAL SETTINGS

Installation and Connection
Notes on installation
•
•
•
•

Make sure you leave an adequate amount of ventilation space so that heat can escape.
Be sure to install this unit where it will not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.
When using a cathode-ray tube (CRT) TV, do not install this unit directly above your TV.
If the picture on your TV screen becomes blurred or distorted, we recommend moving this unit away from your TV.

Center unit

Center unit
Subwoofer

Subwoofer
Install the subwoofer as close to the center unit as possible for a
better unit of sounds.

PLAYBACK

• Install this unit in the center of the left and right walls.
• Listening position (such as sofa, etc.) should be located at the front of
the unit.
• The distance between listening position and the unit should be more
than 1.8 m (5.9 ft).

CONNECTION/
INITIAL SETTINGS

Some of your TV have sensors such as motion sensor, or signal
transmitter for 3D glasses in front. Installing the center unit may
interrupts the sensors or signal transmitter functioning. Set the
center unit away from your TV, or install it in your rack.

PREPARATION

To achieve desired surround sound effects, install this unit where there are no objects such as furniture obstructing the path of sound
beams (☞p. 11). Depending on your installation environment, connections with external components (☞p. 14) should be done before
installation.

Before installing this unit

In the room such as above, you can enjoy rich surround effects by My Surround (☞p. 29, 30).

TROUBLESHOOTING

■ My Surround

SETTINGS

This unit creates surround sound by reflecting projected sound beams off the walls of your listening room. The surround sound effects
produced by this unit may not be sufficient when this unit is installed in the following locations.
• Rooms with walls inadequate for reflecting sound beams
• Rooms with acoustically absorbent walls
• Rooms with measurements outside the following range: W (3 to 7 m (10 to 23 ft)) × H (2 to 3.5 m (7 to 11.5 ft)) × D (3 to 7 m (10 to
23 ft))
• Rooms with less than 1.8 m (6 ft) from the listening position to this unit
• Rooms where objects such as furniture are likely to obstruct the path of sound beams
• Rooms where the listening position is close to the walls
• Rooms where the listening position is not in front of this unit

APPENDIX

9 En

Installation and Connection

■ Adjust the height of center unit
In case that the center unit straddles the stands of your TV,
turning the stands to left makes the unit higher. Confirm the
graduation of each stand to make each stand the same height.
Adjust the graduation in the range from 0 to 10.

■ When the center unit hides the remote
control sensor of your TV
The unit receives the signal from the remote control of your TV
in front, and transmits to your TV by IR Flasher (supplied).
Remove the backing paper on the tip of LED part of IR Flasher,
and attach it to the remote control sensor of your TV or the area
close to the remote control sensor of your TV on the rear panel of
center unit as shown. Connect the plug to the IR output jack of the
unit.

Adjustable range:
28.5mm to 38.5mm
(1-1/8 in to 1-1/2 in)
The graduation

■ Remove the center unit legs
When the center unit hides the remote control sensor or signal
transmitter for 3D glasses of your TV, turn the center unit over,
remove the legs, and use supplied pads as shown below.
1 Turn the leg furthermore to the left.
2 Remove the outside part of the leg.
3 Push the whole leg to the center of the bottom as
shown in the illustration while laying the hook to the
same direction, and then remove the inside part of
the leg.

Remote
control
sensor of
your TV
IR Flasher (supplied)

Notes
• When using IR Flasher, direct the remote control of your TV to
the center unit.
• This function is valid even in the standby mode.
• This function may not activate with some TVs.

Attach the stands to the subwoofer
Install the subwoofer with the supplied stands. Attach the
supplied stands with the dowels to the subwoofer. Changing the
position of the stands enables both horizontal placement and
vertical placement. Horizontal placement is convenient for
installing the center of a rack, and vertical placement is
convenient for installing the side of a rack.
4 Attach the 4 non-skid pads (supplied) to the corners
on the bottom of the center unit. (The illustration
below is one of the examples for attaching the nonskid pads.)

Non-skid pad

Horizontal placement

10 En

Vertical
placement

Installation and Connection
PREPARATION

Installing this unit
This unit outputs sound beam as shown in the illustrations below. Install this unit where there are no obstacles such as furniture
obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved.
You may install this unit in parallel with the wall or in the corner.
Parallel installation
Install this unit in the exact center of the wall when it is measured
from the left and right corners.

Parallel installation
(with 5Beam)

CONNECTION/
INITIAL SETTINGS

An object, such as furniture

Corner installation
Install this unit in the corner at a 40° to 50° angle from the
adjacent walls.

Corner installation
(with Stereo+3Beam)
40° to 50°

PLAYBACK

■ Installation examples
Parallel installation
Install this unit as close to the exact center of the wall as possible.

SETTINGS
TROUBLESHOOTING

Ideal installation condition
Install this unit as close to the exact front of your normal listening position as possible.
The distance between listening position and the unit should be more than 1.8 m (6 ft).

APPENDIX

11 En

Installation and Connection
Installing in a non-square room
Install this unit so that the sound beams can be reflected off the walls.

Example for installing the unit in living room
• As surround beams normally pass through tables, tables are not
obstacles. And a cupboard installed facing the wall reflects
sounds.
• In a case of the listening room as right illustration, adjusting the
position of right channel after auto setup enables to achieve
more desired surround sound effects. (☞p. 38)
• As the curtains absorb sounds, the sound features of the
listening room is different from the case with the curtain opened
and the case with the curtain closed. Using saving settings
function enables to save the best settings for each case of
listening room. (☞p. 22)

12 En

Installation and Connection

Before installing batteries or using the remote control, make sure that you read precautions on the remote control and batteries in
“CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.”

Installing the batteries

PREPARATION

Remote control preparation

Operation range

Press U
Within 6 m (20 ft)

PLAYBACK

Remove the transparent sheet before using.

CONNECTION/
INITIAL SETTINGS

Battery × 2
(AA, R6, UM-3)

SETTINGS

Subwoofer connection

Twist and pull off the
insulation tube on the lead
wire.

Insert into the terminal on
the rear panel.

TROUBLESHOOTING

• Make sure to connect the subwoofer (supplied).
• Do not connect a subwoofer except the supplied one.
• Match the positive (+) of the subwoofer terminal to the positive (+) of the center unit terminal, and the negative (-) of the subwoofer terminal to
the negative (-) of the center unit terminal when connecting the speaker cable (supplied).

APPENDIX

13 En

Connections
• Do not connect the power cable until all connections are completed.
• Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or terminal.

TV and Blu-ray disc player connection
For the cable connection, follow the orders below.

HDMI cable
(optional)
Input the digital audio/
video signals of the Bluray disc player to this
unit.

HDMI cable
(optional)
The digital video of the
Blu-ray disc is reflected
on TV.

Optical cable
(supplied)
Play back digital sounds
of TV on this unit.

Video pin cable
(supplied)
To display the YSP2200’s setup menus on
the TV.

Subwoofer (supplied)
Connect the center unit with the speaker cable
(supplied) to the subwoofer. (☞p. 13).

To AC wall outlet

1. Remove the cap

2. Check the direction
of the plug

2
3

HDMI
OUTPUT

Video signals
Audio signals

1)
Blu-ray disc player

(Example)

INPUT1
VIDEO

R AUDIO L

OPTICAL
OUTPUT

Audio return channel (ARC) supported TV
• Connect HDMI cable to audio return channel supported terminal (the
terminal with “ARC” indicated) on TV. In this case, you do not need
to connect optical cable.
• Activate the HDMI control function of this unit so as to activate audio
return channel (ARC) (☞p. 43).

14 En

HDMI INPUT

What is audio return channel (ARC)?
A function transmits digital audio signal output from TV to this unit
through a HDMI cable. By this function, a digital audio pin cable to
connect TV and this unit is not needed.

Depending on the setting, HDMI for video signal and optical digital
audio, coaxial digital audio or analog audio for audio signal can be
selected. Refer to “Input assignment (☞p. 42)”.

Connections
PREPARATION

Game console or tuner connection
Additional external device (example)

Connecting cable

HDMI cable (optional)

2 Satellite/cable TV (HDMI supported)

HDMI cable (optional)

3 Satellite/cable TV (HDMI not supported)

Digital audio pin cable (supplied) 4)

4 HDMI not supported game console

Analog audio stereo pin cable (optional) 4)
Video signals
Audio signals

PLAYBACK

SETTINGS

(Example)
ANALOG
OUTPUT

CONNECTION/
INITIAL SETTINGS

1 HDMI supported game console

COAXIAL
OUTPUT

HDMI
OUTPUT

VIDEO
OUTPUT

(Example) 4)

TROUBLESHOOTING

VIDEO
OUTPUT

VIDEO
INPUT

(Example)

VIDEO
INPUT

(Example) 4)

APPENDIX

The additional devices having an optical digital output jack, connect to
the optical digital input jack of this unit with an optical cable.

To connect a game console or tuner to TV, you need extra video pin
cables (optional).

15 En

Initial settings
Selecting language for menu
display

1
2

Turn the unit and your TV on.
Switch TV’s input to “VIDEO INPUT 1
(example)”.

YSP-2200
Push [SETUP] to
begin SETUP MENU.

(example)

Check whether the initial screen is displayed. 1)

Press and hold
SETUP key until the
“LANGUAGE SETUP” menu appears on
your TV.

3)LANGUAGE SETUP

[ ]/[ ]:Sel

[ENTER]:Return

Press U / V key to select the desired
language and then press
ENTER key.
Selectable item: ENGLISH, DEUTSCH, FRANÇAIS,
ESPAÑOL, ITALIANO, NEDERLANDS, РУССКИЙ,
SVENSKA
Initial setting: English

When the screen is not displayed
Confirm the case followings.

16 En

– The input jack of your TV and the video output jack of the unit are
connected.
– The input of your TV is set to “VIDEO INPUT 1 (example)”.

Initial settings

IntelliBeam microphone

Upper limit

Center height of this
unit
Within 1 m (3.3 ft)
Within 1 m (3.3 ft)
Cardboard microphone
stand
1.8 m (6.0 ft)
or more

Listening
position
Lower limit

PLAYBACK

Notes

Center line

Installing the IntelliBeam microphone

Cardboard microphone stand

Check if a video pin cable is connected.
TROUBLESHOOTING

IntelliBeam
microphone

SETTINGS

• The AUTO SETUP procedure may not be run successfully if this
unit is installed in one of the rooms described in “Installing this
unit” on page 11. In such cases, run MANUAL SETUP (☞p. 20)
to manually adjust the corresponding parameters.
• Do not connect the IntelliBeam microphone to an extension cable
as doing so may result in an inaccurate sound optimization.
• After you have completed the AUTO SETUP procedure, be sure
to disconnect the IntelliBeam microphone.
• The IntelliBeam microphone is sensitive to heat.
– Keep the IntelliBeam microphone away from direct sunlight.
– Do not place the IntelliBeam microphone on top of this unit.

Place the IntelliBeam microphone on a flat
level surface at your normal listening position.
Use the supplied cardboard microphone stand or a tripod
to place the IntelliBeam microphone at the same height as
your ears would be when you are seated.

■ Assembling the supplied cardboard
microphone stand
1

CONNECTION/
INITIAL SETTINGS

This unit creates a sound field by reflecting sound beams on the
walls of your listening room and by broadening the cohesion of
all the channels. Just as you would arrange the speaker position of
other audio systems, you need to set the beam angle to enjoy the
best possible sound from this unit.
This unit employs the beam optimization and sound optimization
features with the aid of the supplied IntelliBeam microphone, allowing
you to avoid troublesome listening-based setup and achieving highly
accurate sound adjustments that best match your listening
environment. We call these two features “IntelliBeam” generically.
Beam optimization:
This feature optimizes the beam angle so that the parameter best
matches your listening environment.
Sound optimization:
This feature optimizes the beam delay, volume, and quality so
that the parameters best match your listening environment.
This unit performs these two automatic optimizations with the aid
of the supplied IntelliBeam microphone. 2)

PREPARATION

Make sure that there are no obstacles between the
IntelliBeam microphone and the walls in your listening
room as these objects obstruct the path of sound beams.
However, any objects that are in contact with the walls
will be regarded as a protruding part of the walls.

Auto setup for appropriate
surround effects (IntelliBeam)

Fit in

Remove
Fit in

APPENDIX

Place

4 horizontally

Run
through

• “BEAM+SOUND OPTIMIZE” screen appears automatically when
the IntelliBeam microphone is connected. “BEAM OPTIMIZE
ONLY” or “SOUND OPTIMIZE ONLY” can be selected separately
in setup menu (☞p. 20).

• Data set automatically can be saved in the system memory (☞p. 22).
You can save the several data depending on listening room and you
can change the setting conveniently.

17 En

Initial settings

Using AUTO SETUP (IntelliBeam)
Notes
• It is normal for loud test tones to be output during the AUTO
SETUP procedure. Make sure that there are no children around
in the listening room while the AUTO SETUP procedure is in
progress.
• Make sure that your listening room is as quiet as possible. For
accurate measurement, turn off air conditioner or other devices
that make noises.
• If there are curtains in your listening room, we recommend
following the procedure below.
1 Open the curtains to improve sound reflection.
2 Run “BEAM OPTIMIZE ONLY”.
3 Close the curtains.
4 Run “SOUND OPTIMIZE ONLY”.

1
2
3

Turn the unit and your TV on.
Switch TV’s input to “VIDEO INPUT 1
(example)”.
Connect the supplied IntelliBeam
microphone to the INTELLIBEAM jack.

IntelliBeam microphone

When pressing
RETURN key displays the setup menu
Press
SETUP key repeatedly and display the menu screen again, then
select: “AUTO SETUP” “BEAM+SOUND OPTIMIZE”.
When the screen is not displayed
Confirm the case below.
– The input jack of your TV and the video output jack of the unit are
connected.
– The input of your TV is set to “VIDEO INPUT 1 (example)”.

18 En

“BEAM+SOUND OPTIMIZE” is selected automatically. When you
perform “BEAM OPTIMIZE ONLY” or “SOUND OPTIMIZE ONLY”
only, refer to “AUTO SETUP via setup menu (☞p. 20)”.

• Wait outside the room during the AUTO SETUP procedure.
• The AUTO SETUP procedure takes about 3 minutes.
• To cancel the AUTO SETUP procedure after it is started, press
RETURN key.

Initial settings

Press
ENTER key to confirm the
results. 5)
The measurement result is saved.

AUTO SETUP
(PREPARATION & CHECK)

AUTO SETUP COMPLETE

Please connect the MIC.
Please place the MIC at least
1.8m/6ft away from SoundProjector. The MIC should be set
at ear level when seated.
Measurement takes about 3min.
After [ENTER] is pressed,
please leave the room.
[ENTER]:Start [RETURN]:Cancel

Remove the IntelliBeam microphone.
Initial screen appears. 6)
Keep the IntelliBeam microphone in a safe place.

Press
ENTER key to start the AUTO
SETUP procedure and then leave the room
within 10 seconds. 3)

PLAYBACK

Please remove the MIC
from Sound Projector
and the listening position.

CONNECTION/
INITIAL SETTINGS

Note
The best setting may not be done if you are in the room. Prepare to
leave the room in 10 seconds after pressing
ENTER in step 4.

PREPARATION

The screen below is displayed after connecting
IntelliBeam microphone to the unit. 1) 2)

The setup screen automatically changes during the AUTO
SETUP procedure.

AUTO SETUP START
Will begin in 10 sec.
Please leave the room.
[RETURN]:Cancel

SETTINGS

The measurement results are stored in the internal
memory of this unit until you run the AUTO SETUP
procedure again or configure the settings manually.
You can save the several measurement result using
memory setting function (☞p. 22).

---------

(After 3 min.)

TROUBLESHOOTING

XXXXXXXXSHOW RESULTXXXXXXXXXX
MEASUREMENT COMPLETE.
BEAM MODE :5Beam/Plus2
SUBWOOFER :Yes
[ENTER]:Save set-up.
[RETURN]:Do not save set-up.

• If an error occurs, an error buzzer sounds and an error message is
displayed. For details on error messages, see “Error messages for
AUTO SETUP” (☞p. 21).
• If “ENVIRONMENT CHECK:Failure” is displayed, refer to “Error
messages for AUTO SETUP” (☞p. 21), press
RETURN key, and
then run the AUTO SETUP procedure again.
• Depending on the environment of your listening room, the beam
angles of front right and left and surround left and right may be set to
the same value even if “BEAM MODE :5 Beam” is displayed as a
result.

If you do not want to reflect the results, press

APPENDIX

If AUTO SETUP procedure is complete, this unit rings
the chimes. 4)

RETURN key.

When AUTO SETUP is performed from SETUP MENU, menu selection
screen of SETUP MENU appears.

19 En

Initial settings

■ AUTO SETUP via setup menu

1
2
3

Place the IntelliBeam microphone and
press
SETUP key.
Press U / V to select “AUTO SETUP”
and then press
ENTER key.
Press U/ V to select one of the items
below and then press
ENTER key.
Select Item:
“BEAM+SOUND OPTIMIZE” (Beam optimization
and sound optimization)
It is recommended that you should select this optimization
feature, if you make settings for the first time.
This menu takes about three minutes.
“BEAM OPTIMIZE ONLY”(Beam optimization
only)
Use to optimize the beam angle so that the parameter best
matches your listening environment.
This menu takes about one minute.
“SOUND OPTIMIZE ONLY”(Sound optimization
only)
Use to optimize the beam delay, volume, and quality so
that the parameters best match your listening environment.
You must optimize the beam angle with “BEAM
OPTIMIZE ONLY” before starting “SOUND OPTIMIZE
ONLY”. It is recommended that you should select this
optimization feature in the following cases:
• If you have opened or closed the curtains in your
listening room before using this unit
• If you have manually set the beam angle.
This menu takes about two minutes.

Connect the IntelliBeam microphone to
this unit after “AUTO SETUP
(PREPARATION & CHECK)” screen is
displayed.
For the details on installing and connecting IntelliBeam
microphone, refer to “Installing the IntelliBeam
microphone (☞p. 17)”.

Note
The best setting may not be done if you are in the room. Prepare to
leave the room in 10 seconds after pressing
ENTER in step 4.

5
6

20 En

Perform the step 4, 5 and 6 of “Using
AUTO SETUP (IntelliBeam) (☞p. 19)”.
After setup is completed, remove the
IntelliBeam microphone.

Initial settings

ERROR E-1: Please test in quieter environment.

ERROR E-6: Volume level is lower than expected.
Please check MIC position/connection and re-try.
Cause

Remedy

The IntelliBeam microphone
cannot collect the sound
produced by this unit because the
sound output level is too low.

Make sure that the IntelliBeam
microphone is firmly connected
to this unit and placed in a proper
location. If the problem persists,
contact the nearest
authorized Yamaha service
center for assistance.

ERROR E-7: Unexpected error happened. Please
turn off and re-try.
Cause

Remedy
Press
key to turn this unit
to standby mode, then run AUTO
SETUP procedure again after
turning this unit on.

Remedy

An internal system error
occurred.

There is too much unwanted
noise in your listening room.

Make sure that your listening
room is as quiet as possible. You
may want to choose certain hours
during the day when there is not
much noise coming from outside.

ERROR E-9: Turn off and check the connection with
subwoofer.

ERROR E-2: No MIC detected. Please check MIC
connection and re-try.
Remedy

The IntelliBeam microphone is
not connected to this unit or
disconnected during the AUTO
SETUP procedure.

Connect the IntelliBeam
microphone to this unit firmly.

Remedy

Subwoofer is not connected.

Press
key to turn this unit
to standby mode, connect the
subwoofer (☞p. 13). After that,
run AUTO SETUP procedure
again.

SETTINGS

Cause

ERROR E-3: Unexpected control is detected. Please
re-try.
Remedy

Some other operations were
performed on this unit while the
AUTO SETUP procedure was in
progress.

Do not perform any other
operations while the AUTO
SETUP procedure is in progress.

TROUBLESHOOTING

Cause

ERROR E-4: Please check MIC position. MIC should
be set in front of the Sound Projector and re-try.
Cause

Remedy

The IntelliBeam microphone is
not placed in front of this unit.

Make sure that the IntelliBeam
microphone is installed in front
of this unit.

APPENDIX

ERROR E-5: Please check MIC position. MIC should
be set above 1.8m/6.0ft and re-try.
Cause

Remedy

The IntelliBeam microphone is
not placed in the right distance
from this unit.

Make sure that the IntelliBeam
microphone is installed more
than 1.8 m (6.0 ft) from the front
of this unit and within 1 m (3.3
ft) from the center height of this
unit.

PLAYBACK

Cause

CONNECTION/
INITIAL SETTINGS

If an error message is displayed on your TV, check the error
message list to solve the problem and then follow the procedure
below.
[ERROR E-1]: Press
ENTER key to run the AUTO SETUP
procedure again. Or press
Z key to continue the
measurement.
[ERROR E-7], [ERROR E-9]: Press
key to turn this unit
to standby mode, then run AUTO SETUP procedure again after
turning this unit on.
Other errors: Press
RETURN key to cancel the operation
and then run the AUTO SETUP procedure again.
If the problem is difficult to be solved, configure the settings
manually in “SETUP MENU” (☞p. 36).

PREPARATION

■ Error messages for AUTO SETUP

21 En

Initial settings

Saving several measurement results
(Memory setting function)
You can save the current beam and sound settings in the system
memory of this unit. It is handy to save certain settings according
to the varying conditions of your listening environment. For
example, if there are curtains in the path of sound beams, the
effectiveness of the sound beams will vary depending on whether
the curtains are open or closed.
If there are curtains in your listening room, we recommend
following the procedure below.
1. While the curtains are open, run “BEAM+SOUND
OPTIMIZE” (☞p. 20) and then save the settings to
“Memory 1”.
2. While the curtains are closed, run “SOUND OPTIMIZE
ONLY” (☞p. 20) and then save the settings to
“Memory 2”.

■ Saving settings

1
2
3
4
5

Press

SETUP key.

Select “MEMORY” and press
key.

ENTER

Press
U/
V key to select “SAVE”
and then press
ENTER key.
Press
U / V key to select the desired
memory number and then press
ENTER
key. 1)
Selectable item: Memory 1, Memory 2, Memory 3
“Memory 1 Save Now ?” is displayed when the memory
number is selected.

Press

ENTER key.

“Memory 1 Saving…” is displayed and the setting is
saved.

• If system settings are already stored in the selected memory number,
this unit overwrites the old settings.
• Memory function cannot be set when “MEMORY PROTECT” is set
to “ON” in ADVANCED SETUP (☞p. 45).

22 En

Initial settings

SETUP key.

Select “MEMORY” and press
key.

ENTER

Press
U/
V key to select “LOAD”
and press
ENTER key.
Press
U/
V key to select the
memory number to be loaded and then
press
ENTER key.
Selectable item: Memory 1, Memory 2, Memory 3
“Memory 1 Load Now ?” is displayed when the memory
number is selected.

Press

ENTER key.
PLAYBACK

Press

CONNECTION/
INITIAL SETTINGS

1
2
3
4

PREPARATION

■ Loading settings

“Memory 1 Loading…” is displayed and the setting is
loaded.

SETTINGS
TROUBLESHOOTING
APPENDIX

23 En

Initial settings

Operating the unit by TV’s remote
control
What is the HDMI control function?
You can use the TV remote control to operate this unit if your TV
supports the HDMI control function (ex. REGZA Link) and is
connected to this unit’s HDMI OUT (ARC) jack. 1)
Remote control of TV (Example)

Power on/off

Switches input
This unit automatically
selects the input according to
the input source setting on the
TV. Switching input on TV
menu (ex. selecting Blu-ray
disc player on TV menu) also
changes input of this unit.

Controls the volume

Selects a component to
reproduce sounds (this
unit or TV)

• Even if your TV supports the HDMI control function, some functions
may not be available. For details, refer to the manual supplied with
your TV.
• If you use HDMI to connect this unit to a device such as a Blu-ray
disc player that supports HDMI control, you can control that device
using the HDMI control function.
• We suggest that you use products (TV, Blu-ray disc/DVD player, etc.)
from the same manufacturer.

24 En

Initial settings

1
2

Turn on all components connected to this
unit with HDMI.
Check all components connected with
HDMI and enable the HDMI control
function on each component.
For this unit, set “HDMI CONTROL” to “ON” (☞p. 43). 2)
For external components, refer to the manual supplied
with each component. 3)

Turn off the TV and then turn on it again.

Registering HDMI components to TV 4)

Select this unit as the input source of the
TV.
Turn on the HDMI control function
supported component (example: Blu-ray
disc player) connected to this unit.

When connecting Blu-ray disc player with HDMI 1 jack,
press
input selector key once to show the following
diagram.
Input source name

The HDMI control function is not working even checking the
above,
– Turn off this unit and the TV, and then turn them back on
again.
– Disconnect the AC power supply cable of the unit and
external components connected to the unit with HDMI.
Plug them in again after about 30 seconds.
– After selecting INPUT1, INPUT2, INPUT3 or DOCK,
change the input of TV and the one of this unit to the same
input.

Changing the connection method and
connected components
When the connected components and jacks are changed, reset this
unit with following procedures.

1
2

Turn off the HDMI control function of the
TV and player, turn off all connected
devices, and change the connections.
Perform the step 1 to 3 of “Setting the
HDMI control function”.

TROUBLESHOOTING

HDMI1

Check the following:
– The TV is connected to the HDMI OUT (ARC) jack of this
unit.
– “HDMI CONTROL” (☞p. 43) is set to “ON” in setup
menu.
– The HDMI control function is enabled on the TV. (Also
check the relative settings such as power interlock function
or speaker priority.)

SETTINGS

Select the input source of this unit to Bluray disc player and check whether the
image in the player is correctly displayed
or not.

If the HDMI control function is not working

PLAYBACK

1
2

Check if the HDMI control function works
(turn on this unit or adjust the volume level
using the remote control of the TV).

CONNECTION/
INITIAL SETTINGS

PREPARATION

Setting the HDMI control function

APPENDIX

• The default setting is “OFF”.
When “HDMI CONTROL” is set to “ON” in setup menu,
– Even you press
key, the power does not completely turned
off and the signal outputs from the HDMI IN jack to HDMI OUT
(ARC) jack.
– Before turning off the unit, select desired input sources connected
to HDMI IN (1 to 3).
– According to the TV, the TV operation such as changing the
channel may change the setting of surround modes of this unit.

The example of TV settings
• From a setup menu on your TV, select “Link setting” “HDMI
control setting” (example), then set a setting such as “HDMI control
function” to “ON” (example).
• Setting such as “Speaker priority” should be set to “AV amplifier”.

For some HDMI components, you only need to set the HDMI control
function. Registering HDMI components to TV is not required in this
case.

25 En

PLAYBACK

Playback features
Basic operation for playback

1
2
3

Press

key to turn on this unit.

Turn on components (TV, Blu-ray disc
player, game console, etc.) connected to
this unit.
Select a component you want to listen to
by pressing the input selector key ( , ,
) corresponding to the connection of
external components.
For example, when playing back a Blu-ray disc player
connected to HDMI IN 1 jack, select HDMI1 by pressing
input selector key
as shown below.
Input source name

HDMI1

4
5
6

Play back component selected in step 3.
Press
VOLUME +/- key to adjust the
volume. 1) 2) 3)
Press
SUBWOOFER +/- key to adjust
the subwoofer. 4)
Select surround mode or stereo mode and
set your sound preferences. (☞p. 27)

Press

When audio is output from both TV speaker and this unit, mute the TV
sound.

To mute the sound
Press
MUTE key. While the mute function is activated, the VOL
indicator on the front panel display flashes. To resume the volume, press
MUTE key again or press
VOLUME +/- key.

26 En

key to turn this unit to standby mode.

Note

When sound input to HDMI IN is output from the TV, the volume level
does not change even if you press
VOLUME +/- key or
MUTE
key.

• The subwoofer volume can be adjusted separately from the volume.
• Lowering the subwoofer volume is recommended at night.

Playback features

Switching stereo/surround sound
When playback is in stereo sound.

STEREO key to switch to stereo

When playback is in surround sound.

Press
mode.

While watching the TV, compensate the excessive volume differences
to make it easier to hear during the following cases.
• When switching the channel
• When a TV program changed to commercial
• When one program is finished and another program started

Press
UNIVOLUME key to turn the function
on/off. 6)

SURROUND key to switch to surround

Playing back digitally compressed formats
(MP3, WMA, etc.) with enriched sound
(Compressed Music Enhancer)

Press
ENHANCER key to turn the function
on/off. 5)

Use this feature to adjust the volume balance for each channel
during playback. 7)

1
2

Press

CH LEVEL key.

Press
U/ V key to select adjustable
channel from the followings.

SETTINGS

Left Lv: Front left
Right Lv: Front right
CenterLv: Center
Sur.L Lv: Surround left
Sur.R Lv: Surround right
SWFR Lv: Subwoofer
When My Surround is selected:
CenterLv: Center
SurLR Lv: Surround left and right
SWFR Lv: Subwoofer

• The default setting is “On” for DOCK input, and “Off” for other
inputs.
• Compressed Music Enhancer does not work when the source is
following digital audio signal,
– Dolby TrueHD, DTS-HD Master Audio, etc.
– Signal that sampling rate is more than 48 kHz.

• The default setting is “Off”.
• To set the UniVolume to “Off”, press
UNIVOLUME key.
• We recommend turning off the UniVolume function during playback
of music.

Adjustable range: -10.0 dB to +10.0 dB

Press
menu.

CH LEVEL key to exit from the

APPENDIX

Y/Z key to adjust the volume. 8)

Refer to “Volume level of each channel with test tones (☞p. 41)” when
adjusting the test sound.

TROUBLESHOOTING

Press

PLAYBACK

Play back digitally compressed format such as MP3 and WMA
emphasizing bass and treble extended dynamically.

Volume balance adjustment

CONNECTION/
INITIAL SETTINGS

Press
mode.

Automatic volume level adjustment
(UniVolume)

PREPARATION

Enjoying sound with your preference

Example of volume balance
• If you have problems hearing words: Select CenterLv (center) to
increase the level.
• When the sound does not seem like surround sound: Select Sur.L Lv
(surround left) and Sur.R Lv (surround right) to increase the level.
• The volume of subwoofer also can be adjusted by using
SUBWOOFER +/- key.

27 En

Playback features

Enjoying realistic surround sound (CINEMA
DSP)
Playback surround sounds using Yamaha’s exclusive CINEMA
DSP. 1)

1
2

Press
SURROUND key to switch to
surround mode.
Press the desired
repeatedly. 2) 3)

CINEMA DSP key

The CINEMA DSP category name appears in the front
panel display and the CINEMA DSP indicator (☞p. 7)
lights up.
MOVIE
Sci-Fi
This program clearly reproduces dialogs and special sound
effects of the latest science fiction films and lets you feel a
broad and expansive cinematic space.
Adventure
This program reproduces the thrilling environment of the
latest action films and lets you feel the dynamic and
excitement of fast-moving scenes.
Spectacle
This program reproduces the wide and grand environment and
lets you have added impressions on spectacular scenes with
strong visual impacts.

CINEMA DSP
This unit is equipped with a Yamaha CINEMA DSP (digital sound field
processing) chip containing several sound field programs used to
enhance your playback experience. Most of the CINEMA DSP programs
are precise digital recreations of actual acoustic environments of famous
concert halls, music venues, and movie theaters.

The CINEMA DSP programs are not available in the following
conditions.

28 En

• HD audio signals are being played back on a Blu-ray disc.
• Audio signals with sampling frequency of higher than 96 kHz are
being played back.
• When using My Surround function (☞p. 29).
• When playing back in stereo mode.

This unit automatically memorizes the settings assigned to each input
source. When you select another input, the unit automatically recalls the
last settings for the selected input.

Playback features

OFF (DSP Off)
Sur.Decorder (surround decorder)
This program plays back surround sound without CINEMA
DISP sound field effect.

Concert Hall
This program creates a rich surround effect of a large round
concert hall with a great deal of presence, emphasizing the
extension of sounds, and lets you feel as if you are seated
close to the center of the stage.

Changing the audio output method for
surround playback

Jazz Club
This program recreates the acoustic environment of “The
Bottom Line”, a famous jazz club in New York once and lets
you feel as if you are seated right in front of the stage.
ENTERTAINMENT

Talk Show
This program reproduces excitement of live talk shows. It
enhances the ambience of gaiety while keeping the
conversations at a comfortable volume.

SETUP key.

Use
U / V key and
select “Sound Setup”.

ENTER key to

Use
U / V key and
select “Sound Out”.

ENTER key to

Use
U / V key and
select “Ch Out”.

ENTER key to

Press
Y/Z key to select the number of
output channels.
Selectable item: 5.1ch, 7.1ch, Auto ch* 4)

Press

V key to select “Sur.”

Press
Y/Z key to select the desired
audio output method.
Selectable item:
(When 5.1ch is selected) 5Beam, St+3Beam,
3Beam, My Sur.
(When 7.1ch is selected) 5Beam+2, St+3Beam2,
3Beam, My Sur.

To exit the menu, press

SETUP key.

Mch Stereo
This program downmixes multi-channel source to 2 channels
and then outputs the sound from all speakers and produces
stereo sounds in wide range. It is ideal for background music
at parties, etc.

APPENDIX

Continued to the next page.

TROUBLESHOOTING

Game
This program is suitable for role-playing and adventure
games. It utilizes the sound field effects for movies to
represent the depth and spatial feeling of the field during play,
while offering movie-like surround effects in the movie
scenes in the game.

6
7

Press

SETTINGS

Drama
This program stables reverberations that match a wide range
of movie genres from serious dramas to musicals and
comedies, and offers an optimum 3D feeling, reproducing
effects tones and background music softly but cubically
around clear words.

1
2
3
4
5

PLAYBACK

Sports
This program reproduces the energetic environment of live
sports broadcasting, converging a commentator’s voice on the
center and broadening the overall atmosphere of the stadium,
and lets you feel as if you are seated at an actual stadium or a
ball park.

You can set the number of beam output channels and audio
output method.

CONNECTION/
INITIAL SETTINGS

Music Video
This program produces a vibrant environment and lets you
feel as if you are at an actual jazz or rock concert.

PREPARATION

MUSIC

• The default settings are marked with “*”.
• When “Auto ch”(automatic) is set.
When the input signal is 2ch/5ch 5.1ch output
When the input signal is 6.1/7.1ch 7.1ch output

29 En

Playback features

■ Selectable item for “Sur. (surround)”
Beam modes for “5.1ch”
For enjoying
surround sound
effects on the movie,
etc. to the fullest

For watching live
recordings on a
Blue-ray disc

5 Beam (5 Beam)
Outputs sound beams
from the front right and
left, center, and surround
right and left channels.

St+3Beam (Stereo+3Beam)

Outputs normal sound from the front right and left
channels and sound beams from the center and
surround right and left channels.

For enjoying movies
with the whole
family, or when the
listening position is
close to the backside
of the wall.

For small listening
area or when
surround sound
effects are
insubstantial due to
the listening room
conditions.

30 En

Beam modes for “7.1ch”
5Beam+2 (5Beam Plus2)
Outputs sound beams
from the front right and
left, center, and surround
back right and left
channels. Surround right
and left channel sources
are mixed into the front
right and left and
surround back right and
left channels.
St+3Beam2 (St+3Beam Plus2)

Outputs normal sound from the front right and left
channels and sound beams from the center and
surround back right and left channels. Surround
right and left channel sounds are output by using
front right and left channel sound and surround
back right and left sound beams.

3 Beam (3 Beam)
Outputs sound beams from the front right and left and center channels.
Other channel sources are mixed into the front right and left channels.

My Sur. (My Surround)
For the full effect of My Surround, your listening position must face toward the front of this unit.
Even surround sound effects are insubstantial with other setting, you can enjoy sound with surround
effects.

Playback features
PREPARATION

Surround decoder setting
When this unit plays back 2-channel or 5.1-channel sources in
surround mode, surround decoder enables them playback for 7.1channel. 1) You can enjoy a variety of surround sound effects by
switching the decoder. 2)

CONNECTION/
INITIAL SETTINGS

Select and set “Sur.Dec.Mode” in the option
menu.
Refer to “Configuring settings for each input source (Option
menu)” on page 33 for the operation of option menu.
Available decoders and recommended sources
2ch 5ch
Recommended
source

Decoder
Pro Logic (Dolby Pro
Logic)

All sources

PLII (Dolby Pro Logic
II)

Movie
Music
Game

Movies
Music
Games

Neo:6 (DTS Neo:6)

Cinema
Music

Movies
Music

PLAYBACK

–

2ch 7ch

PLIIx (Dolby Pro Logic
IIx)

Movie
Music
Game

Movies
Music
Games

Neo:6 (DTS Neo:6)

Cinema
Music

Movies
Music

SETTINGS

Recommended
source

Decoder

TROUBLESHOOTING

5.1ch input source

Decoder

PCM, Dolby Digital, Dolby Digital
EX, Dolby TrueHD, Dolby Digital
Plus

Dolby Pro Logic IIx Movie/
Music

DTS Digital, DTS-ES matrix, DTSHD Master Audio, DTS-HD High
Resolution Audio

DTS-ES matrix

DTS-ES discrete

• The decoders are available only when surround playback is selected.
• Available decoders vary depending on the “Ch Out” setting (☞p. 30).
• During stereo playback (☞p. 27) or using My Surround function
(☞p. 29), surround decoder is invalid.

31 En

APPENDIX

About the surround decoder Playing back 5.1-channel
sources
When “Ch Out” (channel output) is set to “7.1ch”, this unit decodes 5.1channel sources and then playback them in up to 7.1-channel surround
(☞p. 29). One of the following decoders is automatically selected
depending on the input signals.

Playback features

Using useful features
Sleep timer/auto power down function
Use this feature to automatically set this unit to the standby mode
after a specified period of time.

Press

SLEEP key repeatedly.

Switching the time it takes to switch to standby mode. The
SLEEP indicator (☞p. 7) flashes in the front panel display.
The SLEEP indicator in the front panel display lights up and the
sleep timer is set. 1)
Selectable item: Sleep 120 min., Sleep 90 min., Sleep
60 min., Sleep 30 min., AutoPowerDown, Off

■ Auto power down function 2)
When AutoPowerDown is set, the unit is turned to standby mode
automatically after 10 minutes from the selected input source is
turned off or in standby mode. This function is useful to prevent
you from forgetting to turn off the unit.

Settings for each input source (Option menu)
Set according to each input (TV/HDMI1-3/INPUT1-3/DOCK).
Available menu items vary depending on the selected input.

1
2

Press input key ( ,
, ,
) to select
the input you want to change the setting.
Press

OPTION key.

The option menu is displayed on the front panel display.

;Volume Trim

3
4
5
1)

• The sleep timer setting is canceled if this unit is set to the standby
mode or “Off” is selected.
• When AutoPowerDown is set, SLEEP indicator does not light up
while the input source component is turned on.

• If the unit is operated during the 10 minutes before entering standby
mode, the unit does not enter standby mode until 10 minutes after the
latest operation.
• AutoPowerDown cannot be selected when:
– analog (INPUT3) or DOCK is selected.
– TV or HDMI1-3 is selected and HDMI control function is on.

32 En

Select the items by pressing
U/
key, then press
ENTER key.

Change setting value by pressing
key.

Y/Z

To exit the option menu, press
key.

OPTION

For details on Interlock, refer to “Playing back iPod/iPhone (☞p. 33)”.
For details on Connect, Disconnect and Pairing, refer to “Playing back
Bluetooth components (☞p. 35)”.

Playback features

Input source

Menu items

HDMI1-3

Volume Trim, Decoder Mode, Sur. Dec. Mode,
Signal Info

■ Displaying the input signal information
(Signal Info)
U/

Press

Digital audio format

Channel

The number of channels included in input signal
(front/surround/LFE (low frequency sound
effects))
Display example: [3/2/0.1] Front 3ch,
Surround 2ch, LFE for input signal 4)

Volume Trim, Sur. Dec. Mode, Connect,
Disconnect, Pairing, Interlock 3)

Sampling

Sampling frequency for digital input signal

The option menu items are listed below. These settings are
applied to the currently selected input source. The default settings
are marked with “*”.

■ Adjusting input level of each jack
(Volume Trim)

■ Switching the audio signal to play back
(Decoder Mode)

Bitrate per second of input signal

HDMI In

HDMI video signal resolution

HDMI Message

When error occurs with HDMI (displayed only
when error is occurred.)

Playing back iPod/iPhone
You can play music stored in iPod/iPhone connected to Yamaha
Universal Dock for iPod (optional YDS-12, etc.) or Wireless
System for iPod/iPhone (optional YID-W10).

Use to select digital audio signals for playback.
Selectable item: Auto*, DTS

Insert the iPod/iPhone into the Yamaha
Universal Dock for iPod or Wireless
System for iPod/iPhone connected to the
DOCK terminal. 5)

SETTINGS

Auto: This unit automatically selects the audio signal for
playback. Normally select this mode.
DTS: This unit plays back only DTS signal.

■ Setting the surround decoder
(Sur. Dec. Mode)

To VIDEO INPUT of TV 6)
(only when YDS-12/YDS-11/
YDS-10 is used)

Refer to “Enjoying sound with your preference” (☞p. 27) for
details.

• Connect when this unit is in standby mode.
• For details on how to connect and set up the YDS-12 and YID-W10,
refer to manuals supplied with them.
• Remove the cable from the unit pushing the projection on the upper of
the plug.

Playback iPod/iPhone by selecting dock
input by pressing
DOCK key. 7)
APPENDIX

If the input signal includes channels that cannot be displayed in the
format shown in the display example, the total number of channels will
be displayed, as in “5.1ch”.

Place it as far as possible from this unit to avoid the noise.

When using YDS-12, YDS-11, or YDS-10 with the video pin cable
(supplied) to connect the VIDEO OUT jack of this unit to the VIDEO
INPUT jack of the TV, you can display iPod/iPhone video on the TV.

TROUBLESHOOTING

YDS-12, etc.

PLAYBACK

Adjust the input level for each jack to compensate for variations
in volume between different input devices.
Adjustable range: -6.0 dB to 0.0 dB* to +6.0 dB

Bitrate

CONNECTION/
INITIAL SETTINGS

Format

INPUT1-3
DOCK

V key to change the following information.

PREPARATION

Option menu items
The following menu items are provided for each input.

Notes

• Some features may not be available depending on the model or the
software version of your iPod/iPhone.
• For details about the messages displayed on the front panel display of
connected iPod/iPhone, refer to “iPod/iPhone (☞p. 48)” in
“Troubleshooting”.
• Be sure to set the volume to minimum before docking or removing
your iPod/iPhone.

33 En

Playback features

When using Yamaha Universal Dock for iPod
(optional YDS-12, etc.) 1)
After setting the iPod/iPhone to the dock, you can use the remote
control of this unit for playback operations. You can also display
iPod/iPhone video on the TV.
: Controls iPod’s menu.
: Controls click wheel.
iPod/iPhone supported by Universal Dock for iPod
(YDS-12/YDS-11/YDS-10):
(As of September 2010)
• iPod touch, iPod mini, iPod (4th and 5th generations), iPod
Classic, iPod nano, iPhone, iPhone 3G, iPhone 3GS
• iPhones are not compatible with YDS-11/YDS-10.

When using Wireless System for iPod
(optional YID-W10) 2)
After connecting the receiver to this unit and setting the iPod/
iPhone to the transmitter, you can use the connected iPod/iPhone
as a remote control while playing back music.
iPod/iPhone supported by Wireless System for iPod
(YID-W10):
(As of September 2010)
iPod touch, iPod (5th generation), iPod Classic, iPod nano,
iPhone, iPhone 3G, iPhone 3GS

■ Link with this unit (Interlock mode) 3)
When using YID-W10, You can use functions following for iPod/
iPhone when “Interlock” is set to “On” in option menu (☞p. 32).
• When playback starts on iPod/iPhone, this unit is turned on and
DOCK (iPod) is selected as source automatically.
• This unit turns to standby mode automatically when the
playback is stopped or after a while iPod/iPhone is removed
from the transmitter.

This unit charges the battery of an iPod/iPhone stationed in the Yamaha
Universal Dock for iPod connected to the DOCK terminal even when
this unit is in standby mode. “Charging” appears in the front panel
display.

• When YID-W10 is connected, and the “Interlock” is set to “On”, it
charges even in standby mode.
• To set the playback volume higher than the maximum volume of the
iPod/iPhone, use this unit’s remote control to control the volume.

34 En

This function works with ring tone and sound of application. When the
iPhone is set to silent mode, this unit does not turn on with the ring tone.

Playback features

Play back music stored in the Bluetooth components (portable audio
players, Bluetooth-enabled computers, etc.) connected to the
Bluetooth Wireless Audio Receiver (optional YBA-10).

Pairing

DOCK key to set the input to

Turn on the Bluetooth component you
want to pair with, and then enter pairing
state. 5)
Press

1
2
3
4

OPTION key.

Press
DOCK.

DOCK key to set the input to

Press

OPTION key.

Select “Connect” and press
key. 8)

ENTER

To disconnect the Bluetooth Wireless
Audio Receiver from the Bluetooth
component, press
OPTION key again to
display option menu, select “Disconnect”,
and press
ENTER key.

Option menu for DOCK input appears in the display.

Select “Pairing” by pressing
U/
key and press
ENTER key. 6)

V
TROUBLESHOOTING

Press
DOCK.

Connecting 7)

SETTINGS

2
3

As described in step 1 (☞p. 33) of “Playing
back iPod/iPhone”, connect the Bluetooth
Wireless Audio Receiver (optional YBA-10)
to DOCK terminal. 4)

Select the Bluetooth Wireless Audio
Receiver from the component list of the
Bluetooth components and input “0000”
for password of the Bluetooth.

PLAYBACK

If the Bluetooth component detects the Yamaha Bluetooth
wireless audio receiver, the audio receiver name (“YBA-10
YAMAHA”, for example) appears in the device list of the
Bluetooth component.

CONNECTION/
INITIAL SETTINGS

About “Pairing”
It is the operation of registering a component for
communications. Pairing must be performed before using a
Bluetooth component with the Yamaha Bluetooth Wireless
Audio Receiver connected to the system for the first time, or if
the registered pairing data has been deleted.
To ensure security, a time limit of 8 minutes is set for the pairing
operation. Please read and fully understand all the instructions
before starting.

Check that the Bluetooth components
recognize the Bluetooth Wireless Audio
Receiver.

PREPARATION

Playing back Bluetooth components

“Searching...” appears on the display when the Bluetooth
connection is initiated.

APPENDIX

For details, refer to the manual supplied with YBA-10.

Refer to the manual of your Bluetooth component for details.

To cancel pairing, press

RETURN key.

When establishing the Bluetooth connection from this unit, it is only
possible to connect to the most recently connected Bluetooth component.

• For details of messages, refer to “Bluetooth (☞p. 49)” in
“Troubleshooting”.
• If you want to establish a connection with a Bluetooth other than the
one most recently connected, initiate the connection from that
Bluetooth component. Refer to the manual of your Bluetooth
component for details.

35 En

SETTINGS

Setup menu
Setting procedure
Before performing following procedures, check if this unit and
TV are connected with the video pin cable (supplied) and switch
TV input to “VIDEO INPUT 1 (example)”.

Press
SETUP key to enter the setup
1)
menu.

SET MENU
MEMORY
AUTO SETUP
MANUAL SETUP
SOUND SETUP
INPUT MENU
DISPLAY MENU
[ ]/[ ]:Up/Down
[ENTER]:Enter

Select menu by pressing
and press
ENTER key.

V key

Repeat these step to display desired menu.

MANUAL SETUP
1)SETTING PARAMETERS
2)BEAM ADJUSTMENT
3)IMAGE LOCATION

[ ]/[ ]:Up/Down
[ENTER]:Enter

3
4

Change setting value of each menu by
pressing
Y/Z key. 2)
Press
SETUP key again to exit the
setup menu.
Press

Note

Press and hold
(☞p. 44).

36 En

2)
SETUP key to display “LANGUAGE SETUP” menu

RETURN key to return to the previous menu.

The default settings are marked with “*”.

Setup menu

Category
MEMORY

Menu
LOAD
SAVE

AUTO SETUP

BEAM
ADJUSTMENT

IMAGE
LOCATION
TONE CONTROL

TREBLE, BASS

SUBWOOFER
AUDIO DELAY

LFE LEVEL, DISTANCE
AUTO LIP SYNC

SOUND OUT
INPUT MENU

INPUT RENAME

HDMI SETUP
DISPLAY MENU

F. DISPLAY SETUP
OSD SETUP

UNIT SETUP

☞p. 20

Optimizes the sound settings automatically.

☞p. 20

Adjusts the listening room and listening position
settings.

☞p. 20

☞p. 38

Adjusts the various sound beam settings.
☞p. 39

Adjusts the sound position of the front right and left
channels.
Adjusts the output level of high-frequency or
low-frequency sound.
Configures the subwoofer settings.
Adjusts delay in output timing between video signals
and audio signals.
Adjusts output timing of audio signals manually.

Adjusts the dynamic range.
Adjusts the volume of each channel.

Configures the sound beam output settings.
Configures the surround audio signal output settings.
Assigns jacks according to the component to be used.
Configures the sound output from HDMI jack

Renames the displayed input source.

☞p. 40
☞p. 40
☞p. 40
☞p. 40
☞p. 40
☞p. 41
☞p. 41
☞p. 41
☞p. 41
☞p. 42
☞p. 42
☞p. 43

Configures the HDMI settings.

☞p. 43

Configures the front panel display settings.

☞p. 44

Configures the OSD settings.

☞p. 44

Changes the language used in the OSD.
☞p. 44

Changes the display unit of measurement.

☞p. 44

37 En

APPENDIX

LANGUAGE
SETUP

Optimizes the beam settings automatically.

☞p. 22

TROUBLESHOOTING

INPUT
ASSIGNMENT

☞p. 23

SETTINGS

Dynamic Range
Control
CHANNEL LEVEL

TV, HDMI1-3,
INPUT1, INPUT2,
INPUT3
Adaptive DRC, Dolby/
DTS DRC
Front L, Front R, Center,
Surround L, Surround R,
Subwoofer
CHANNEL OUT
SURROUND
OPTICAL1, OPTICAL2,
COAXIAL, ANALOG
AUDIO SELECT
(HDMI1, HDMI2,
HDMI3)
TV, INPUT1, INPUT2,
INPUT3, HDMI1,
HDMI2, HDMI3
HDMI CONTROL,
SUPPORT AUDIO
STANDARD DIMMER,
AUTO DIMMER
OSD SHIFT, OSD BACK
COLOR
ENGLISH, DEUTSCH,
FRANÇAIS, ESPAÑOL,
ITALIANO,
NEDERLANDS,
РУССКИЙ, SVENSKA
METERS, FEET

Page

PLAYBACK

SOUND SETUP

INSTALLED POSITION,
listening room settings,
distance settings
HORIZONTAL ANGLE,
BEAM TRAVEL
LENGTH, FOCAL
LENGTH (Front L, Front
R, Center, Surround L,
Surround R)
LEFT, RIGHT

Features
Loads the beam and sound settings saved in the
memory.
Saves the current beam and sound settings to the
memory.
Optimizes the beam and sound settings automatically.

CONNECTION/
INITIAL SETTINGS

MANUAL SETUP

BEAM+SOUND
OPTIMIZE
BEAM OPTIMIZE
ONLY
SOUND OPTIMIZE
ONLY
SETTING
PARAMETERS

Sub menu
Memory 1, Memory 2,
Memory 3
Memory 1, Memory 2,
Memory 3
AUTO SETUP

PREPARATION

Setup menu list

Setup menu
When this unit is installed at
the corner of the room,
specify the width of length
of the listening room.

Manual setup
Use this menu to manually adjust the parameters related to the
sound beam output. To fine-adjust parameters configured by
AUTO SETUP, use “BEAM ADJUSTMENT” and “IMAGE
LOCATION”.

Setting parameters
MANUAL SETUP SETTING PARAMETERS
Use to set the position of this unit in your listening room and the
distance of this unit from the listening position. 1) 2)

In “SETTING PARAMETERS 1/3”,
configure “INSTALLED POSITION”.
Select the installed position of this unit. 3)
Selectable item: FLAT TO WALL* (parallel to
wall), ANGLE TO WALL OR CORNER (angle to
wall or corner)

In “SETTING PARAMETERS 3/3”,
configure the distance settings.
Specify the distance between the listening position and
this unit. When this unit is installed parallel to wall, you
also need to specify the distance between the listening
position and left wall.
Control range (from this unit): 1.8 m to 9.0 m
(6.0 ft to 30.0 ft)
Control range (from left wall): 0.6 m to 11.4 m
(2.0 ft to 38.0 ft)
FLAT TO WALL

FLAT TO WALL

ANGLE TO WALL OR
CORNER

1.8 to 9.0 m
(6.0 to 30.0 ft)

In “SETTING PARAMETERS 2/3”,
configure the listening room settings.
Specify the length and width of the listening room.
Control range: 2.0 m to 12.0 m (6.5 ft to 40.0 ft)
When this unit is installed
parallel to wall, specify the
width of the listening room
and the distance between this
unit and rear wall.

If you make adjustments in “SETTING PARAMETERS”, the “BEAM
ADJUSTMENT” parameters are automatically adjusted.

If you make adjustments in “SETTING PARAMETERS”, the beam
optimization settings made in the AUTO SETUP procedure will be lost.

If you change this setting, “Surround mode” setting changes
automatically (☞p. 29).

38 En

0.6 to 11.4 m
(2.0 to 38.0 ft)

Setup menu

MANUAL SETUP BEAM ADJUSTMENT
Use to manually adjust the various sound beam settings. 4)

Configure “FOCAL LENGTH”. 6)

Configure “HORIZONTAL ANGLE”.
Adjust the horizontal angle of sound beams for each
channel using test tones.
Adjust toward L (left) to move the direction of the output
to the left and adjust toward R (right) to move it to the
right.
Control range: L90° to R90°

Focal
point
(–)

(+)

(–)

Focal
length

PLAYBACK

Sweet
spot

Adjust the distance that sound beams travel after being
output and reflected off the wall until they arrive at the
listening position so that all sounds can arrive at the
listening position at the same time.
Control range: 0.3 m to 24.0 m (1.0 ft to 80.0 ft)
The length of each arrow
indicates the beam travel
length.

Example
Front left channel

Center channel

TROUBLESHOOTING

（−）
（＋）

• The “BEAM ADJUSTMENT” parameters are automatically adjusted
(except “Center” in “FOCAL LENGTH”) if you run the AUTO
SETUP (☞p. 18) or if you configure “SETTING PARAMETERS”
(☞p. 38).
• Depending on the surround mode settings (☞p. 29), some channel
positions may not be available for selection. In this case, “- -” is
displayed.

Note

Configure this setting only when you have adjusted “HORIZONTAL
ANGLE”.

The width of the sweet spot becomes slightly wider than the width of this
unit if you run the AUTO SETUP (☞p. 18) or if you configure
“SETTING PARAMETERS” (☞p. 38).

39 En

APPENDIX

SETTINGS

We recommend that you use the initial setting
(-0.5 m or -1.5 ft) for “Center”.
Sub menu: Front L, Front R, Surround L, Surround
R
Control range: -1.0 m to +13.0 m (-3.5 ft to +43.5 ft)
Sub menu: Center
Control range: -1.0 m to -0.5 m* to +13.0 m (-3.5 ft
to -1.5 ft* to +43.5 ft)

Configure “BEAM TRAVEL LENGTH”. 5)

CONNECTION/
INITIAL SETTINGS

Adjust the distance from the front of this unit to the focal
point of output for each channel to achieve an expansive
feeling for each channel. Adjust toward - (minus) to move
the focus outward (widen the sweet spot) and adjust
toward + (plus) to move the focus toward the normal
position (narrow the sweet spot).

PREPARATION

Beam adjustment

Setup menu

Image location

Tone control

MANUAL SETUP IMAGE LOCATION
Use to adjust the direction from which the front left and right
channel sound is heard so that each sound can be heard closer to
the center channel.
Use this feature to redirect audio signals if the sound coming
from the front left and right channels seems unnatural.
You can adjust this parameter only when “5BeamPlus2”, “5
Beam” or “3 Beam” is selected in “Surround mode” (☞p. 29).
Select “ON” to configure the sound direction.
Selectable item: OFF*, ON

Adjust the image location for the front left
channel (LEFT).
The higher the percentage, the louder the output from the
center.
Control range: 0%* to 95%

Without adjustment

With the front left
channel adjusted

Tone control
SOUND SETUP TONE CONTROL
Use to adjust the output level of high/low-frequency sound.
Sub menu: TREBLE (High tone), BASS (Low tone)
Adjustable range: -10.0 dB to 0.0 dB* to +10.0 dB

Subwoofer settings
SOUND SETUP SUBWOOFER
Sub menu: LFE LEVEL
Adjust the volume of Dolby Digital and DTS signals included in
the LFE (low frequency sound effects). 2)
Adjustable range: -20.0 dB to 0.0 dB*
Sub menu: DISTANCE
Adjust the distance of the subwoofer from the listening position.
Adjustable: 0.3 m to 2.5 m* to 15.0 m (1.0 ft to 8.5 ft* to
50.0 ft)

Audio delay control

SOUND SETUP AUDIO DELAY
Flat panel display TV images sometimes lag behind the sound.
You can use this function to delay the sound output to
synchronize it with the video image.

Adjust the image location for the front
right channel (RIGHT).
The higher the percentage, the louder the output from the
center.
Control range: 0%* to 95%

Without adjustment

With the front right
channel adjusted

Sub menu: AUTO LIP SYNC
Select how to automatically adjust the audio output delay.
Selectable item: ON*, OFF
“ON”: The audio output delay is automatically adjusted. This
item is available when a TV that supports the automatic lipsync is
connected to the HDMI OUT (ARC) jack of this unit.
“OFF”: Select “OFF” if the TV connected to the HDMI OUT
(ARC) jack of this unit does not support the automatic lipsync or
you want to disable the automatic lipsync. The delay time for
each input can be adjusted manually by following items.
Sub menu: TV
Adjust the audio output delay applied to signals input from the
TV jacks.
Adjustable range: 0 ms* to 300 ms

To adjust the volume of each channel, see “CHANNEL LEVEL”
(☞p. 41)

40 En

What is LFE?
“LFE” refers to low frequency effects included in the digital audio.
Digital signals such as Dolby Digital and DTS include a dedicated line
for LFE.

Setup menu

Dynamic range control

Input level

On
Off

Sub menu:
Front L, Front R, Center, Surround L, Surround R,
Subwoofer
Adjustable range: -10.0 dB to +10.0 dB

Sound out setting
Sound beam output configuration
SOUND SETUP SOUND OUT
Sub menu: CHANNEL OUT, SURROUND
Use to configure the number of output channels (5.1ch/7.1ch/
Auto) or audio output method. For details, see “Changing the
audio output method for surround playback” (☞p. 29).

Input level

TROUBLESHOOTING

Volume : low

Output level

Off

SOUND SETUP CHANNEL LEVEL
Use to adjust the volume of each channel with test tones. 6)

SETTINGS

Volume level of each channel with test tones
PLAYBACK

SOUND SETUP Dynamic Range Control
Use to adjust the dynamic range compression. Dynamic range is
the difference between the smallest sound that can be heard above
the noise of the equipment and the biggest sound that can be
heard without distortion.
Sub menu: Adaptive DRC 3)
Select whether to automatically adjust the dynamic range in
conjunction with the volume level. When this function is set to
“ON”, the dynamic range is adjusted as follows.
When the volume level is low:
Narrow the dynamic range. Loud sound is played back softer, and
soft sound which is hard to be listened to is played back louder.
When the volume level is high:
Widen the dynamic range. From soft sound to loud sound, source
sound is played back without adjusting volume.

CONNECTION/
INITIAL SETTINGS

Sub menu: INPUT1/INPUT2/INPUT3
Adjust the audio output delay applied to signals input from the
INPUT1/INPUT2/INPUT3 jacks.
Adjustable range: 0 ms to 30 ms* to 300 ms

Sub menu: Dolby/DTS DRC
Select the amount of dynamic range applied when this unit is
decoding Dolby Digital and DTS signals.
Selectable items: Min/Auto, Standard, Max*
Max: Outputs sound without adjusting the dynamic range of the
input signals. 5)
Standard: The dynamic range recommended for regular home
use.
Min/Auto:
(Minimum) Adjust the dynamic range for low volume or a quiet
environment, such as at night, for playing back bitstream signals
except for Dolby TrueHD signals.
(Auto) Adjust the dynamic range based on information from the
input signal when playing back Dolby TrueHD signal.

PREPARATION

Sub menu: HDMI1-3
Manually adjust the audio output delay applied to signals input
from the HDMI IN jacks. This setting is effective only when
“AUTO LIP SYNC” is set to “OFF”.
Adjustable range: 0 ms to 30 ms* to 300 ms

Volume : high

Selectable item: ON*, OFF
“ON”: Adjust dynamic range automatically. 4)
“OFF”: The dynamic range is not adjusted automatically.

APPENDIX

• When set to “ON”, “Dolby/DTS DRC” is automatically set to “Max”.
• This setting is not available when the UniVolume is set to “ON”.

This makes the sound easier to hear when listening at low volume at
night, for example.

“Adaptive DRC” is automatically set to “OFF” when the settings other
than “Max” is selected.

When using My Surround function, Center, Surround L/R, Subwoofer
can be selected.

41 En

Setup menu

Input assignment
Input assignment
INPUT MENU INPUT ASSIGNMENT1)
Use to change the key assignments of input jacks on this unit. The
sound of the input select is decided according to key assign set to
each jacks. 2)
Selectable item:
Sub menu
Audio input jack
OPTICAL1

Default setting
TV

DIGITAL (OPTICAL)
TV
OPTICAL2

INPUT1

DIGITAL (OPTICAL)1
COAXIAL

INPUT2

DIGITAL (COAXIAL)2
ANALOG

INPUT3

AUDIO INPUT 3

Selectable item: TV, INPUT1, INPUT2, INPUT3, HDMI1,
HDMI2, HDMI3
AUDIO SELECT (Audio select of HDMI input)
Switch the HDMI sound signal to Off when you want to playback
the video from HDMI IN jack and sound from AUDIO INPUT
jack. 3)
Sub menu: HDMI1, HDMI2, HDMI3
Selectable item: OFF, ON*

Set corresponding HDMI IN to “OFF” in audio input setting to HDMI IN
jack of “INPUT ASSIGNMENT” when selecting HDMI IN.

The selectable item for other digital sound input jack already selected
will not be displayed.

42 En

Example: When connecting this unit and PC
1 Connect DVI output jack of the PC and HDMI IN 3 using DVI
HDMI converter cable.
2 Connect a sound output jack of the PC and AUDIO INPUT 3 jack
(ANALOG).
3 Set “ANALOG” of “INPUT ASSIGNMENT” to “HDMI3”
4 Set “HDMI3” of “AUDIO SELECT (INPUT ASSIGNMENT)” to
“OFF”.

Setup menu

INPUT MENU INPUT RENAME
Use to change the name of the input source displayed when the
input source is selected. Select a name from templates, or enter an
original name.

■ Selecting a name from templates

Press
name.

Y/Z key to select a input source

Selectable item: Blu-ray, DVD, DVR, CATV,
Satellite, Game

To exit the menu, press

RETURN key.

■ Entering an original name

Press

ENTER key.

“T” appears above the new name display to indicate the
position to be entered.

Press
Y/Z key to place the _
(underscore) under the space or the
character you want to edit.
Press
U/
character. 4)

RETURN

HDMI setup
Menu: HDMI SETUP
Use to configure the settings related to HDMI signals and HDMI
control function.

■ HDMI control
Sub menu: HDMI CONTROL
Use this function to link this unit and an HDMI controlcompatible TV via HDMI. For details, see “Operating the unit by
TV’s remote control (☞p. 24)”.
Selectable item: OFF*, ON
“OFF”: Disable the control function. The standby power
consumption of this unit decreases.
“ON”: Enable the control function.

■ Audio playback component
Sub menu: SUPPORT AUDIO
Use to select a component to play back HDMI audio signals. This
setting is effective when “HDMI CONTROL” is set to “OFF”. 5)
Selectable item: YSP-2200*, OTHER
“YSP-2200”: Play back the input sound signal.
“OTHER”: Play back the equipment connected to HDMI OUT
(ARC) jack.

TROUBLESHOOTING

Press
U/
V key to select the input
source to be renamed.

To exit from the menu, press
key.

ENTER

SETTINGS

1
2

To complete the setting, press
key.

PLAYBACK

Press
U/
V key to select the input
source to be renamed.

Repeat steps 3 and 4 to edit other
characters.

CONNECTION/
INITIAL SETTINGS

1
2

5
6
7

PREPARATION

Input rename

V key to select the desired

APPENDIX

A to Z, 0 to 9, a to z, and symbols (!, ?, <, >, etc.) are available for input.

HDMI video signals input to one of the HDMI IN jacks of this unit are
always output from the HDMI OUT (ARC) jack of this unit.

43 En

Setup menu

DISPLAY MENU
■ Front panel display setup
DISPLAY MENU F.DISPLAY SETUP
Use to adjust the brightness and display settings of the front panel
display.
Sub menu: STANDARD DIMMER
Use to adjust the brightness of the front panel display when you
operate this unit. The front panel display dims as the number
becomes small.
Selectable item: -2, -1, OFF* (brightest)
Sub menu: AUTO DIMMER
Use to adjust the brightness of the front panel display at normal
time (unit/remote control without operation) based on setting
value of the “STANDARD DIMMER”. The front panel display
dims as the number becomes small.
Selectable item: DISPLAY OFF (hide), -3, -2, -1, OFF*
(brightest)

■ OSD setup
DISPLAY MENU OSD SETUP
Use to adjust the display position and select the background color
of the OSD.
Sub menu: OSD SHIFT
Use to adjust the vertical position of the OSD. Adjust toward the (minus) direction to raise the position of the OSD, and adjust
toward the + (plus) direction to lower it.
Adjustable range: -5 to ±0* to +5
Sub menu: OSD BACK COLOR
Use to select the background color of the OSD.
Selectable item: Blue*, Gray, Black, Purple, Red

■ Language setup 1)
DISPLAY MENU LANGUAGE SETUP
Use to select the language used in the OSD.
Selectable item: ENGLISH* (English), DEUTSCH
(German), FRANÇAIS (French), ESPAÑOL (Spanish),
ITALIANO (Italian), NEDERLANDS (Dutch), РУССКИЙ
(Russian), SVENSKA (Swedish)

■ Unit setup
DISPLAY MENU UNIT SETUP
Use to change the display unit of measurement.
Selectable item: METERS, FEET
For Canada model, “FEET” is default setting.
For other models, “METERS” is default setting.
• Select METERS to enter distances in meters.
• Select FEET to enter distances in feet.

• Press and hold
SETUP key to display the menu directly.
• The settings may be changed automatically when using the TV which
supports the HDMI control function.

44 En

Advanced setup

“ADVANCED SETUP” appears in the front panel
display.

5
6

Release INPUT key on the front panel.

Press
U/
V to select the desired
menu on the front panel display and then
press
ENTER key. 1)
Change setting by pressing

Y/Z key. 2)

Press
key to set this unit to the
standby mode.
The new setting will be reflected when you turn on the
unit by pressing
key.

Description

CONNECTION/
INITIAL SETTINGS

While holding down INPUT key on the front
panel, press
key on the remote
control to turn on the power.

PREPARATION

1
2

Press
key to turn this unit to
standby mode.

Selectable item/Adjustable range
Off* (Not set), 01 to 99, MAX (Maximum)

MAX VOLUME SET

Sets maximum volume.

01 to 99, MAX* (Maximum)

PANEL INP. KEY

Enables/disables the INPUT key on the front panel.

P.INPUT: ON* (Enabled), P.INPUT:OFF (Disabled)

F.PANEL. KEY

Enables/disables the keys on the front panel.

P.INPUT: ON* (Enabled), P.INPUT:OFF (Disabled)

R.INPUT POWER

Enables/disables power-on by remote control input
keys when the unit is in standby mode.

R.INPUT PW: OFF* (Disables power-on),
R.INPUT PW: ON (Enables power-on)

AC ON STANDBY

Sets whether or not this unit returns to its previous
state when AC power is restored after a temporary
power loss.

AC STANDBY: OFF* (Restores the state before
power was lost),
AC STANDBY: ON (Enters standby mode)

MEMORY PROTECT

Prohibits saving of the settings by using the memory
setting function (☞p. 22).

PROTECT:OFF* (Protect is not performed),
PROTECT:ON (Protect is performed)

DEMO MODE

Demonstrates sound beam. 3)

BEAM DEMO:OFF* (Normal playback),
BEAM DEMO:ON (Demo mode)

FACTORY PRESET

Resets all settings to their default values.

PRST:CANCEL* (Reset is not performed),
PRST: RESET (Reset is performed)

SETTINGS

Sets volume level at power-on.

PLAYBACK

TURN ON VOLUME

TROUBLESHOOTING

To return to the previous menu, press

The default settings are marked with “*”.

3)
RETURN key.

APPENDIX

This unit outputs sound beam down-mixed to 1 channel moving
horizontally to right and left. By this function, you can feel how sound
beam is output from this unit.
“Demo” appears in the front panel display while setting demo mode.
Start/stop moving horizontally
Press
Off key.
Auto Demo On: Sound beam automatically moves horizontally to right
and left
Auto Demo Off: The direction of sound beam is fixed
Adjust the angle of sound beam manually
Press
SURROUND/
STEREO key in the state of “Auto Demo
Off”

45 En

TROUBLESHOOTING

Troubleshooting
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the
instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest
authorized Yamaha dealer or service center.

General
Problem

Cause

Remedy

See
page

This unit does not
operate properly.

The internal microcomputer has been
frozen by an external electric shock (such
as lightning or excessive static electricity)
or by a power supply with low voltage.

Set this unit to the standby mode, disconnect the
AC power supply cable, plug it back in after 30
seconds, and use it normally.

This unit fails to turn on
when key is pressed,
or enters the standby
mode soon after the
power has been turned
on.

The AC power supply cable is not firmly
connected to the AC wall outlet.

Connect the AC power supply cable firmly to the
AC wall outlet.

A speaker cable may be shorted.

Make sure a speaker cable is connected properly.

This unit has been exposed to a strong
external electric shock (such as lightning
and strong static electricity).

Set this unit to the standby mode, disconnect the
AC power supply cable, plug it back in after 30
seconds, and use it normally.

–

This unit suddenly
enters the standby
mode.

The internal temperature becomes too high
and the overheat protection circuitry has
been activated.

Wait for about one hour for this unit to cool down, turn
it back on after confirming an adequate amount of
ventilation space and not to cover this unit with a cloth.

The sleep timer has turned the unit off.

Turn on the power and play back the source again.

The power has shut down after wireless
was disconnected for a while during
“Interlock” is set to “On” using YID-W10.

Resume wireless connection or detect audio of
iPod/iPhone and turn on the unit.

–

Incorrect input or output cable connections.

Connect them with an HDMI connection or a
digital connection.

No appropriate input source has been
selected.

Select an appropriate input source with INPUT key
or input selector keys.

The volume is turned down.

Turn up the volume.

The sound is muted.

Press MUTE or VOLUME +/- key to resume audio
output and adjust the volume level.

There is input signal cannot be played back
by this unit.

Play a source whose signals can be reproduced by
this unit. Change the system settings of the source
component.

–

“SUPPORT AUDIO” is set to “OTHER”.

Set to “YSP-2200”.

“HDMI CONTROL” is set to “OFF”.

When connecting ARC (Audio Return Channel)
supported TV and this unit using HDMI cable only,
set “HDMI CONTROL” to “ON”.

Connect coaxial digital input jack and TV’s audio
output jack using a digital audio pin cable.

No sound.

The sound of effect
channel for cable
broadcasting may
become noise.

The source has a surround effect.

No sound or too small
sound from a specific
channel.

The output level of the channel is muted.

Raise the output level of the channel.

The beam setting is inappropriate.

Adjust the beam setting.

You play back the source in the stereo
mode.

Start surround playback.

Some audio output methods do not output
sound beams for certain channels.

Adjust the beam setting.

When connecting this unit with playback
component and TV digitally, the output
setting of the playback component and TV
is not valid.

Refer to the manual supplied with your component
and check the setting.

The listening room is not a regular shape,
or the unit or listening position is not at the
center of the right and left wall of the
listening room.

Relocate the unit or listening position.

There is no wall in the path of the sound
beam.

Try placing a flat object, such as a board, in the path
of the sound beam.

When My Surround is selected, listening
position is not in front of the unit.

Listen in front of this unit.

Surround sound effects
are insubstantial.

46 En

–

14, 15

Do not put surround effect by this unit.
–

27, 41
29
28
29

–

11, 38

–
30

Troubleshooting

Cause

Remedy

See
page

No sound from the
subwoofer.

The subwoofer is not connected properly.

Check if the subwoofer is connected properly.

The level of subwoofer is low.

Increase the subwoofer level with SUBWOOFER +
key.

The image is not
displayed on TV screen.

HDMI cable is not securely connected.

Connect them with an HDMI connection or a
digital connection.

Menu screen of this unit
is not displayed.

VIDEO OUTPUT jacks of this unit and TV
are not connected.

Connect the jacks with video pin cable (supplied).

14, 15
14

Leave these equipments from the unit.

–

The system settings
change automatically.

When “HDMI CONTROL” is set to “ON”,
operations of the TV (for example,
changing channels, etc.) may change the
system settings, such as the surround mode.

Set “HDMI CONTROL” to “OFF” or set the
system again by using its remote control.

The HDMI control
function does not work
properly.

“HDMI CONTROL” is set to “OFF”.

Set “HDMI CONTROL” to “ON”.

The HDMI control function is disabled on
your TV.

Refer to the manual supplied with your TV and
check the setting.

–

The number of the connected HDMI
components is over the limit.

Disconnect some of the HDMI components.

The automatic lipsync
is not effective even
“AUTO LIP SYNC” is set
to “ON”.

The TV does not support the automatic
lipsync.

Set “AUTO LIP SYNC” to “OFF” and then
manually adjust the audio output delay.

“Not Available” appears
on the front panel
display after key
operation.

The key is unable to function in the current
condition.

–

SETTINGS

Remote control
Cause
Wrong distance or angle.

Remedy
The remote control functions within a maximum
range of 6 m (20 ft) and no more than 30 degrees
off-axis from the front panel.

Direct sunlight or lighting (from an inverter
type of fluorescent lamp, etc.) is striking
the remote control sensor of this unit.

Reposition this unit.

The batteries are weak.

Replace all batteries.

See
page
13

–
13

TROUBLESHOOTING

The remote control
does not work and/or
function properly.

PLAYBACK

Switch the input source for your TV.

The unit may be placed close to digital
equipment or high-frequency equipment.

CONNECTION/
INITIAL SETTINGS

The input switch of TV is not set correctly.

A digital or highfrequency equipment
produces noises.

Problem

PREPARATION

Problem

APPENDIX

47 En

Troubleshooting

iPod/iPhone
Note
If the problem occur other than the following message displayed on the display, check the connection of your iPod/iPhone.

Message
Connect error

Features
iPod/iPhone has a problem with
communication.

Low Battery

The battery of iPod/iPhone is running low.

Unknown iPod

The iPod/iPhone being used is not
supported by this unit.

Connected

iPod/iPhone is correctly connected to the
Yamaha Universal Dock for iPod.

Remedy

See
page

Turn off the power of this unit and reconnect
Yamaha Universal Dock for iPod again.

Reset iPod/iPhone to a Yamaha Universal Dock for
iPod.

Connect supported iPod to this unit.

iPod/iPhone is correctly set to Yamaha
Wireless Transmitter and connected to this
unit wirelessly.

Disconnected

iPod/iPhone is removed from Yamaha
Universal Dock for iPod.
The wireless connection of this unit and
iPod/iPhone is disconnected.

Unable to play

For some reason, iPod/iPhone cannot be
played back.

Charging

Your iPod/iPhone is charging.

48 En

Check whether the music stored in iPod/iPhone is
playable or not.

–

Troubleshooting

Note
If the problem occur other than the following message displayed on the display, check the connection of your Bluetooth component.

Message
Searching...

Features

Remedy

See
page

(When pairing)
– The pairing should be performed for this unit and
the Bluetooth component at the same time. Make
sure that the Bluetooth component is also a
pairing mode.
(When Connected)
– Make sure that the power of the Bluetooth
component is on.
– Check if the distance between the Yamaha
Bluetooth Wireless Audio Receiver and the
Bluetooth component is in 10 meters.

–

– The Bluetooth component and this unit have not
been performed pairing. Pairing the stations
again.

CONNECTION/
INITIAL SETTINGS

The Yamaha Bluetooth Wireless Audio
Receiver (such as YBA-10, optional) and
the Bluetooth component are in the process
of the pairing.
The Yamaha Bluetooth Wireless Audio
Receiver (such as YBA-10, optional) and
the Bluetooth component are in the process
of establishing the connection.
The pairing is canceled.

Not Available

The Yamaha Bluetooth Wireless Audio
Receiver (such as YBA-10, optional) and
the Bluetooth component are in the process
of the pairing.

Connected

The connection between the Yamaha
Bluetooth Wireless Audio Receiver (such
as YBA-10, optional) and the Bluetooth
component is established.

Disconnected

The Bluetooth component is disconnected
from the Yamaha Bluetooth Wireless
Audio Receiver (such as YBA-10,
optional).

Not found

The unit cannot find the Bluetooth
component while performing the pairing or
trying to connect to the Bluetooth
component.

When the unit freezes, the problem may solve by resetting the unit.
To reset the unit, press
key of this unit for more than 10 seconds.

TROUBLESHOOTING

y Resetting this unit

SETTINGS

The pairing is completed.

Canceled

PLAYBACK

Completed

PREPARATION

Bluetooth

APPENDIX

49 En

APPENDIX

Glossary
Glossary
Digital Sound Projector

Sampling frequency

Ordinarily, two front speakers, a center speaker, two surround
speakers, and a subwoofer are necessary for enjoying 5.1 channel
surround sound.
Typical 5.1 channel
speaker system

The number of sampling (process for digitalizing analog signals)
per second. In principle, the higher the sampling rate, the wider
the frequency range that can be played back, and the higher the
quantized bit rate, the finer the sound that can be reproduced.

Channel (ch)

Front speakers
Subwoofer

Center
speaker
Surround
speaker

■ 7.1 channel surround playback
This unit creates surround sound by reflecting projected sound
beams off the walls of your listening room.
The sound image of the system

A channel is an audio type that has been divided based on range
and other characteristics.
Ex. 7.1 channel
• Front speakers, Left (1ch), Right (1ch)
• Center speaker (1ch)
• Surround speakers, Left (1ch), Right (1ch)
• Surround back speakers, Left (1ch), Right (1ch)
• Subwoofer (1ch × 0.1* = 0.1ch)
* In contrast to a full 1-channel band, a component designed to
enhance low frequency sound for added effect.

Dolby Digital
Digital surround sound system which is developed by Dolby
Laboratories provides completely independent multi-channel
audio. With 3 front channels (left, center, and right) and 2
surround stereo channels, Dolby Digital provides five full-range
audio channels. By using 2 channel stereo for the surround
speakers, more accurate moving sound effects and surround
sound environment are possible than with Dolby Surround.

Dolby Digital Plus
Dolby Digital Plus is an advanced audio technology developed
for high-definition programming and media including HD
broadcasts, and Blu-ray Disc. Selected as an optional audio
standard for Blu-ray Disc, this technology delivers multichannel
sound with discrete channel output. Supporting bitrates up to 6.0
Mbps, Dolby Digital Plus can carry up to 7.1 discreet audio
channels simultaneously. Supported by HDMI and designed for
the optical disc players and AV receivers/amplifiers of the future,
Dolby Digital Plus also remains fully compatible with the
existing multichannel audio systems that incorporate Dolby
Digital.

50 En

Glossary

Dolby Pro Logic IIx is a new technology enabling discrete
multichannel playback from 2-channel or multi-channel sources.
There are three modes available: “Music mode” for music
sources, “Movie mode” for movie sources (for 2-channel sources
only) and “Game mode” for game sources.

Deep Color

Linear PCM is a signal format under which an analog audio
signal is digitized, recorded, and transmitted without using any
compression. This is used as a method of recording CDs and
DVD audio. The PCM system uses a technique for sampling the
size of the analog signal per very small unit of time. Standing for
pulse code modulation, the analog signal is encoded as pulses and
then modulated for recording.

x.v.Color
x. v. Color is a type of video signal that can be transmitted by the
HDMI jacks of this unit. It is a more extensive color space than
sRGB, and allows the expression of colors that could not be
expressed before. While remaining compatible with the color
gamut of sRGB standards, “x.v.Color” expands the color space
and can thus produce more vivid, natural images. It is particularly
effective for still pictures and computer graphics.

SETTINGS

Deep Color is a type of video signal that can be transmitted by the
HDMI jacks of this unit. Deep Color refers to the use of various
color depths in displays, up from the 24-bit depths in previous
versions of the HDMI specification. This extra bit depth allows
HDTVs and other displays go from millions of colors to billions
of colors and eliminate on-screen color banding for smooth tonal
transitions and subtle gradations between colors. The increased
contrast ratio can represent many times more shades of gray
between black and white. Also Deep Color increases the number
of available colors within the boundaries defined by the RGB or
YCbCr color space.

PCM (Pulse Code Modulation)

PLAYBACK

Dolby TrueHD is an advanced lossless audio technology
developed for high-definition disc-based media including Blu-ray
Disc. Selected as an optional audio standard for Blu-ray Disc, this
technology delivers sound that is bit-for-bit identical to the studio
master, offering a high-definition home theater experience.
Supporting bitrates up to 18.0 Mbps, Dolby TrueHD can carry up
to 8 discrete channels of 24-bit/96 kHz audio simultaneously.
Dolby TrueHD also remains fully compatible with the existing
multichannel audio systems and retains the metadata capability of
Dolby Digital, allowing dialog normalization and dynamic range
control.

HDMI (High-Definition Multimedia Interface) is the first
industry supported, uncompressed, all-digital audio/video
interface. When used in combination with HDCP (Highbandwidth Digital Content Protection), HDMI provides a secure
audio/video interface that meets the security requirements of
content providers and system operators.

CONNECTION/
INITIAL SETTINGS

Dolby TrueHD

HDMI

PREPARATION

Dolby Pro Logic IIx

DTS
TROUBLESHOOTING

Digital surround sound system developed by DTS, Inc., which
provides 5.1 channel audio. With an abundance of audio data, it is
able to provide authentic-sounding effects.

DTS-HD High Resolution Audio

APPENDIX

DTS-HD High Resolution Audio is a high resolution audio
technology developed for high-definition disc-based media
including Blu-ray Disc. Selected as an optional audio standard for
Blu-ray Disc, this technology delivers sound that is virtually
indistinguishable from the original, offering a high-definition
home theater experience. Supporting bitrates up to 6.0 Mbps for
Blu-ray Disc, DTS-HD High Resolution Audio can carry up to
7.1 discrete channels of 24-bit/96 kHz audio simultaneously.

DTS-HD Master Audio
The lossless high quality audio format created for next generation
optical disc such as Blu-lay Disc. It is selected as an audio
standard for Blu-ray Disc. Supporting bitrates up to 24.5 Mbps
for Blu-ray Disc, DTS-HD High Master Audio can carry up to 7.1
discrete channels of 24-bit/96 kHz audio simultaneously.

51 En

Specifications
Specifications
Amplifier section
• Rated Output Power
Woofer (100 Hz, 0.9% THD, 3 Ω)................................................... 70 W
Tweeter (1 kHz, 0.9% THD, 4 Ω).............................................. 1.7 W/ch
• Maximum Output Power
Woofer (100 Hz, 10% THD, 3 Ω).................................................. 100 W
Tweeter (1 kHz, 10% THD, 4 Ω).................................................. 2 W/ch

Speaker section
• Speaker Type
YSP-CU2200.................... Acoustic Suspension magnetic shielding type
NS-SWP600 ............................ Bass Reflex non-magnetic shielding type
• Driver
YSP-CU2200................................................ 2.8 cm (1-1/8 in) Cone × 16
NS-SWP600 ...........................................................10 cm (4 in) Cone × 2
• Impedance
YSP-CU2200....................................................................................... 4 Ω
NS-SWP600 ........................................................................................ 3 Ω
• Frequency Response................... 40 Hz to 20 kHz (-10 dB, Stereo mode)
• Crossover frequency...................................................................... 500 Hz

Input Jack
• Audio Input
Optical .......................................................................... 2 (TV, INPUT 1)
Coaxial ..................................................................................1 (INPUT 2)
Analog ........................................................................... 1 pair (INPUT 3)
• HDMI Input.................................................................3 (HDMI IN 1 to 3
• Dock Input....................................................................................1(Dock)

Output Jacks
• HDMI Output .......................................................................................... 1

• Video Output (Composite video, 1.0 Vp-p)............................................ 1
[U.S.A., Canada, Korea and Taiwan models] ................................. NTSC
[Other models] ...................................................................................PAL
• Subwoofer Output ................................................................................... 1

Microphone Input Jack
• INTELLIBEAM...................................................... 1 (Microphone input)

Remote Input/Output
• IR pass through out ................................................................................. 1

General
• Power Supply
[U.S.A. and Canada models]......................................... AC 120 V, 60 Hz
[Taiwan model] .................................................AC 110-120 V, 50/60 Hz
[Other models] ..................................................AC 220-240 V, 50/60 Hz
• Power Consumption ..........................................................................55 W
• Standby Power Consumption
(HDMI Control on) ......................................................... Less than 4.0 W
(HDMI Control off)
[U.S.A., Canada and Taiwan models]............................. Less than 0.3 W
[Other models] ................................................................ Less than 0.5 W
• Dimensions (W × H × D)
YSP-CU2200 (When the height of the legs is at the minimum)
........................................ 944 × 79 × 145 mm (37-1/8 × 3-1/8 × 5-3/4 in)
NS-SWP600 (When the stand is attached)
Horizontal placement
.................................... 435 × 137 × 350 mm (17-1/8 × 5-3/8 × 13-3/4 in)
Vertical placement ..... 141 × 430 × 350 mm (5-1/2 × 16-7/8 × 13-3/4 in)
• Weight
YSP-CU2200 .................................................................... 4.3 kg (9.5 lbs)
NS-SWP600 .................................................................... 6.0 kg (13.2 lbs)
* Specifications are subject to change without notice.

The “
Corporation.

“ logo and “IntelliBeam” are trademarks of Yamaha

DTS-HD Master Audio, and the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
iPod, iPhone
“iPod” is a trademark of Apple Inc., registered in the U.S. and other
countries.
“iPhone” is a trademark of Apple Inc.

The “
“ logo and “Cinema DSP” are registered trademarks of
Yamaha Corporation.

Bluetooth
Bluetooth is a registered trademark of Bluetooth SIG and is used by
Yamaha in accordance with a license agreement.

Manufactured under license from Cambridge Mechatronics Ltd.
Worldwide patents applied for.
The “
“ logo and “Digital Sound Projector™” are trademarks of
Cambridge Mechatronics Ltd.

“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface”
are trademarks, or registered trademarks of HDMI Licensing LLC.

“x.v.Color” is a trademark of Sony Corporation.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro
Logic” and the double-D symbol are trademarks of Dolby Laboratories.
“UniVolume” is a trademark of Yamaha Corporation.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929;
7,392,195; 7,272,567 & other U.S. and worldwide patents issued &
pending. DTS, DTS-HD and the Symbol are registered trademarks, &

52 En

Specifications
PREPARATION

Available signal information
HDMI signal compatibility
■ Receivable audio signals
Audio signal formats

Compatible media

2ch Linear PCM

2ch, 32-192 kHz, 16/20/24 bit

CD, DVD-Video, DVD-Audio, etc.

Multi-ch Linear PCM

8ch, 32-192 kHz, 16/20/24 bit

DVD-Audio, Blu-ray disc, HD DVD, etc.

Bitstream (SD Audio)

Dolby Digital, Dolby Digital EX, DTS, DTSES

DVD-Video, etc.

Bitstream (HD Audio)

Dolby TrueHD, Dolby Digital Plus, DTS-HD
Master Audio, DTS-HD High Resolution
Audio

Blu-ray disc, HD DVD

• Refer to the supplied instruction manuals of the input source component, and set the component appropriately.
• When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output depending on the type of the DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or DVI components. Refer to the supplied instruction manuals of HDMI or DVI
components for HDCP compatibility.
• To decode audio bitstream signals on this unit, set the input source component appropriately so that the component outputs the bitstream audio signals
directly (does not decode the bitstream signals on the component). Refer to the supplied instruction manuals for details.

PLAYBACK

CONNECTION/
INITIAL SETTINGS

Audio signal types

■ Repeatable video signals 1)
– This unit is compatible with the video signals of the following resolutions:
480i/60 Hz
576i/50 Hz
480p/60 Hz
576p/50 Hz

• 720p/60 Hz, 50 Hz
• 1080i/60 Hz, 50 Hz
• 1080p/60 Hz, 50 Hz, 24 Hz

SETTINGS

•
•
•
•

– Deep Color
– x.v.Color
– 3D video signal

TROUBLESHOOTING

Digital audio signal (optical/coaxial)
Audio signal types

Audio signal formats

Compatible media

2ch Linear PCM

2ch, 32-96 kHz, 16/20/24 bit

CD, DVD-Video, DVD-Audio, etc.

Bitstream

Dolby Digital, Dolby Digital EX, DTS, DTSES

DVD-Video, etc.

APPENDIX

The compatible video signal is changed depending on the connected TV.

53 En

Using the supplied demonstration DVD
By playing back the supplied demonstration DVD, you can check the digital signals being input properly from the Blu-ray disc player
through the digital connection (HDMI, optical, or coaxial) and experience this unit’s multi-channel surround sound.

Playing back the demonstration DVD

2
3
4
5
6

Select input sources both on this unit and
your TV so that audio signal of DVD is
input to this unit and video signal is input
to your TV.
HDMI connection: On your TV, select this unit as the
input source. On this unit, select the Blu-ray disc player as
the input source.
Audio/Video connection: Select the Blu-ray disc player as
the input source on both of your TV and this unit.

Load the demonstration DVD.

Display the DVD menu screen by using the remote
control of the Blu-ray disc player and then playback “Rain
and Thunder”.

Press OPTION key on the remote control
to display the option menu.
Press U/V key to select “Signal Info”, and
then press ENTER key.
Check that “Dolby D” appears in the front
panel display.

If the “Dolby D” does not appear, the digital audio signal
of the demonstration DVD is not input to this unit. Check
the connections and settings of the Blu-ray disc player.

Press V key and check that “3/2/0.1”
appears in the front panel display.

3/2/0.1
Note
“Dolby D” does not appear when the Blu-ray disc player is not
playing back the demonstration DVD and the DVD menu screen is
displayed.

If “Dolby D” does not appear in the front panel display in step 6,
check the followings.
Is the Blu-ray disc player connected to this unit using a
digital cable?
You need to connect these components with digital cables
(HDMI cable, optical cable, or coaxial cable) to playback 5.1channel contents such as Dolby Digital.
Is an input source selected correctly on this unit?
Check that which input jack of this unit the Blu-ray disc player is
connected to. Then check whether the name of input source
displayed in the front panel display of this unit is the same as that
of the input jack used.

y
Select “Rain and Thunder” from the DVD
menu.

Dolby D

If “Dolby D” does not appear

Experience the Dolby Digital 5.1ch
surround sound.
The sound of rain and buzzing of cicadas are heard from
all around the listening position.

y
Enjoy the surround sound in surround playback mode (☞p. 27).

54 En

If you connect the Blu-ray disc player to the HDMI IN 1 jack, when you
select HDMI 1 as the input source, “HDMI 1” should be displayed.

Is digital audio output set correctly on the Blu-ray disc
player?
HDMI connection: Set the digital audio output setting to “Auto”
or “Bitstream”.
Digital audio connection: Enable “Dolby Digital/DTS” or
“Bitstream”.

y
Refer to the owner’s manual supplied with the Blu-ray disc player for the
settings.

Index

F
F.DISPLAY SETUP .................................................... 44
FOCAL LENGTH........................................................ 39
Front panel ...................................................................... 5
Front panel display.......................................................... 7

G
Game console ...............................................................

H
HD audio signals ..........................................................
HDMI ...........................................................................
HDMI cable..................................................................
HDMI control...............................................................
HDMI control function ................................................
HORIZONTAL ANGLE .............................................

28
51
14
43
24
39

I
IMAGE LOCATION ................................................... 40
INPUT ASSIGNMENT ............................................... 42
INPUT RENAME ........................................................ 43
INTELLIBEAM jack ...................................................... 5
IntelliBeam microphone............................................... 17
Interlock ....................................................................... 34
iPhone........................................................................... 33
iPod .............................................................................. 33

Decoder Mode .............................................................. 33
Deep Color.................................................................... 51
Digital audio pin cable.................................................. 15
Digital Sound Projector ................................................ 50
Dolby Digital ................................................................ 50

LANGUAGE SETUP ..................................................
LFE...............................................................................

44
40

55 En

APPENDIX

Cardboard microphone stand ........................................ 17
Ch Out........................................................................... 29
Channel (ch).................................................................. 50
Channel output.............................................................. 31
CINEMA DSP .............................................................. 28
CINEMA DSP indicator ................................................. 7
Compressed Music Enhancer ....................................... 27

TROUBLESHOOTING

BEAM ADJUSTMENT................................................ 39
Beam optimization........................................................ 17
BEAM OPTIMIZE ONLY ........................................... 20
BEAM TRAVEL LENGTH ......................................... 39
BEAM+SOUND OPTIMIZE ....................................... 20
Before installing this unit................................................ 9
Bluetooth components .................................................. 35
Bluetooth Wireless Audio Receiver ............................. 35
Blu-ray disc player........................................................ 26

29
19
19

SETTINGS

Entertainment ...............................................................
Error buzzer sounds .....................................................
Error message...............................................................

PLAYBACK

Adaptive DRC .............................................................. 41
Advanced setup............................................................. 45
Analog audio stereo pin cable....................................... 15
Angle to wall or corner ................................................. 38
ARC .............................................................................. 14
Audio output method .................................................... 29
Audio select of HDMI input ......................................... 42
AUTO LIP SYNC......................................................... 40
Auto power down function ........................................... 32
AUTO SETUP .............................................................. 21
AutoPowerDown .......................................................... 32

CONNECTION/
INITIAL SETTINGS

2ch................................................................................. 31
2-channel....................................................................... 31
3 Beam (3 Beam) .......................................................... 30
5 Beam (5 Beam) .......................................................... 30
5.1ch............................................................... 29, 30, 31
5Beam+2 (5Beam Plus2) .............................................. 30
7.1ch...................................................................... 29, 30

Dolby Digital Plus........................................................ 50
Dolby Pro Logic IIx ..................................................... 51
Dolby TrueHD ...................................................... 27, 51
DTS ....................................................................... 33, 51
DTS-HD High Resolution Audio................................. 51
DTS-HD Master Audio ......................................... 27, 51
Dynamic range control................................................. 41

PREPARATION

Numerics

Index

Sweet spot ..................................................................... 39
System indicator ............................................................. 5

M
MEMORY ....................................................................
Movie............................................................................
MP3 ..............................................................................
Music ............................................................................
My Sur. .........................................................................

22
28
27
29
30

T
Test tones ...................................................................... 41
Tone control.................................................................. 40
TV ................................................................................. 26

O
U

Optical cable.......................................................... 14, 15
Option menu ................................................................. 32
OSD SETUP................................................................. 44

UNIT SETUP................................................................ 44
UniVolume ................................................................... 27

Pairing .......................................................................... 35
Parallel to wall.............................................................. 38
PCM (Pulse Code Modulation) .................................... 51
Power cable ............................................................. 6, 14

Video pin cable ............................................................. 14
VOL indicator .......................................................... 7, 26
Volume ......................................................................... 26
Volume balance ............................................................ 27
Volume Trim ................................................................ 33

R
Rear panel........................................................................ 6
Registering HDMI components to TV ......................... 25
Remote control ................................................................ 8
Remote control sensor ..................................................... 5

S
Sampling frequency............................................... 28, 50
Sampling rate................................................................ 27
Satellite/cable TV ......................................................... 15
SETTING PARAMETERS .......................................... 38
Signal Info .................................................................... 33
SLEEP indicator ...................................................... 7, 32
Sleep timer.................................................................... 32
Sound optimization....................................................... 17
SOUND OPTIMIZE ONLY......................................... 20
Sound Out..................................................................... 29
Sound out setting .......................................................... 41
St+3Beam (Stereo+3Beam).......................................... 30
St+3Beam2 (St+3Beam Plus2)..................................... 30
STATUS indicator........................................................... 5
Stereo mode .................................................................. 27
Subwoofer.............................................................. 26, 27
Subwoofer settings ....................................................... 40
SUPPORT AUDIO....................................................... 43
Sur. ............................................................................... 29
Sur. Dec. Mode............................................................. 33
Surround decoder.......................................................... 31
Surround mode ............................................................. 27
Surround sound............................................................. 28

56 En

W
Wireless System............................................................ 33
WMA ............................................................................ 27

X
x.v.Color ....................................................................... 51

Y
YBA-10......................................................................... 35
YDS-12 ......................................................................... 34
YID-W10 ...................................................................... 34

YD002A0/OMEN

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Yamaha Corporation
Create Date                     : 2010:08:06 11:27:08Z
Modify Date                     : 2015:01:21 10:12:13+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : FrameMaker 7.1
Metadata Date                   : 2015:01:21 10:12:13+08:00
Format                          : application/pdf
Title                           : YSP-2200
Creator                         : Yamaha Corporation
Document ID                     : uuid:e0e1c2d9-82f4-4432-b8dc-0ceeb38615c9
Instance ID                     : uuid:127a1aee-7e9d-cd41-8df5-8a4665c5da7d
Page Layout                     : TwoColumnRight
Page Mode                       : UseOutlines
Page Count                      : 59

EXIF Metadata provided by EXIF.tools

Yamaha Ysp 2200 Users Manual

Navigation menu

Versions of this User Manual:

Views

Navigation