Yamaha G&B Union_US_l DG1000 Owner's Manual

User Manual: Yamaha DG1000 Owner's Manual

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

With the power of Yamaha’s ECM (Electric Circuit Modeling) Technology at your fingertips, the scope of sound creating possibilities
is blown wide open. ECM technology and a very powerful chip developed by Yamaha allow the DG series guitar amplifiers to create
realistic tube tone. Not just one kind of tube tone, but a wide variety of tones. Tone that is full of warmth, attack, dynamic range
and all those little details that give your sound life. And getting that tone is easy too. A user-friendly interface lets you create
sound the way you’re used to, by turning knobs. It’s that simple.

The Power and Performance
of the DG Series in a Stomp Box
APPLICATIONS

Guitar

Expression Pedal
FC7 (Option)

DG-Stomp

Live Performance
The power and performance of Yamaha’s DG
technology will propel you into the spotlight.

Guitar

DG-Stomp

Guitar Amplifier

Headphones

Guitar Amplifier

Home Studio
Wide selection of amp types, speaker
simulation, excellent audio quality and
compact size delivers maximum
versatility and cost performance.

MTR

Speaker

Speaker

Guitar

Digital Recording
Digital OUT jack offers direct digital
connection to a computer, digital mixer or
recorder for maximum sonic performance.

DG-Stomp

Computer

90 Presets

Built-in Tuner

The DG-Stomp’s 90 preset tone settings contain a wide variety of sounds created
especially for the DG-Stomp by tone creators from the United States, Britain and
Germany.

The built-in chromatic tuner utilizes the display and five of the effect button lamps to
help you accurately tune your guitar to any pitch.

Digital Out

Takes the guesswork out of syncing delay times to the song’s tempo. Just tap on the
switch in tempo and the DG-Stomp will calculate the proper delay time instantaneously.

For the utmost in audio quality, the digital out delivers digital data directly to a computer,
digital mixer, digital recorder or any other device capable of handling digital audio.

Speaker Simulator
16 speaker simulation types apply the characteristics of a live speaker to the line signal.
This allows you to plug and play directly into a mixer without loosing the live ambience
that a speaker provides.

Tap Function
Expression Pedal
(Option FC7)
With an expression pedal connected to the DG-Stomp you can control specified
parameters in real-time. Control volume, tone and effect settings or even use it as a
Wah-Wah.

SPECIFICATIONS
Digital Section
• Full Digital Signal Processing • 8 Channel Preamp • Digital Effects
• Compressor • Chorus, Flanger, Phaser, Rotary Speaker, Tremolo
• Digital Delay, Tape Echo • Spring Reverb, Hall Reverb, Plate Reverb
• Tap Tempo Function (Delay Time) • Speaker Simulator (16 Types)
• External Controller Function (EXP Pedal/MIDI): 8
Controllers/Parameters
• Wah Function • Tuner Function (Chromatic, Auto)
MIDI Functions
Receive
Transmit
Controller Switch
Top Panel

Rear Panel

31

Recorder

Program Change (Program Change Table can be created), Control Change, Bulk In
Program Change, Control Change, Bulk Out, Merge Out
UP, DOWN, MANUAL, UTILITY, STORE, COMP, CHORUS, FLANGER, PHASER, ROTARY,
TREMOLO, DELAY, TAPE ECHO, SPRING, HALL, PLATE, SP. SIM, AMP SELECT, GAIN,
MASTER, TREBLE, MIDDLE, BASS, PRESENCE, COMP, SPEED, DEPTH, TIME,
FEEDBACK, LEVEL, REVERB, OUTPUT, 1, 2, 3 BANK
STAND-BY ON/OFF, INPUT, LOW/HIGH

Display

7 Segment LED (3 digit) × 1, Push Switch LED × 17, Foot Switch LED × 4

Connections/Jacks

• INPUT • OUTPUT L/MONO, R • PHONES • EXP. PEDAL • STEREO PHONE JACK
• DIGITAL OUT • MIDI IN, MIDI OUT

A/D Converter

20 bit + 3 bit Floating

D/A Converter

20 bit

Sampling Frequency 48 kHz
Memory Allocations

Preset: 90

User: 90

Input Level/Impedance (When using preamp bypass)
INPUT HIGH: −25dBm/1MΩ
INPUT LOW: −15dBm/1MΩ
Output Level/Impedance

OUTPUT L/MONO, R: 0dBm/1kΩ
PHONES: 0dBm/47Ω (47Ω load)

Power

Exclusive Power Adaptor (AC-10)
AC Output: AC12V, 1000mA

Power Consumption

15W

Dimensions (W×H×D)

280 × 70 × 184mm (11 × 2-3/4” × 7-1/4”)

Weight

2.2kg (4.85 lbs)

Accessories

Power Adaptor (AC-10)

* Specifications and design subject to change without notice.

The DG series’ “Model A” lineup features a powerful digital effects section that includes Chorus,
Tremolo, Reverb and Tape Echo effects. Also included are 80 preset tone “patches” that deliver a wide
range of tone settings for today’s demanding guitarists.
(If you’re the owner of an older DG Amp, you can upgrade your amplifier to “Model A” specs.
Check out our homepage, listed on the next page, for details on the download.)

The DG130HA offers the DG preamp section,
complete with digital effects, combined with a
high quality 130-watt power amplifier to those
that like separate head and speaker units. Match
it with the S412V Speaker Enclosure (shown on
the next page) for a combination that provides
maximum power and versatility.
Eight presets offer the basic tonal ingredients
the knobs let you do the rest. A total of 80
factory “patches” give you a wide variety of tone
settings to start with and there’s plenty of
additional room for storing the sounds you’ve
created on your own. An onboard digital effects
section features Chorus, Tremolo, Reverb, Simulated Spring and Tape Echo effects.
Mounted in the sturdy enclosure is a single Celestion “G12H-100” 12-inch speaker
that is driven by 80-watts of quality power.

SPECIFICATIONS
Digital Section

Analog Section

MIDI Function
Controller/Switch

Display
Indicator
Connection Jacks

The DG80-210A features the same DG preamp,
complete with onboard digital effects section, as
the DG80-112A. A high quality 80-watt amplifier
drives a pair of 10-inch Celestion “V10-60”
speakers for faithful reproduction of tones you’ve
created. All components are mounted in a sturdy
enclosure that is compact and easy to transport.

A/D Converter
D/A Converter
Sampling Frequency
Memory Number
Input Level/Impedance
Output Level/Impedance

Power Requirements
Power Consumption

Dimensions (W x H x D)

Weight

Complete Digital Signal Processing
Internal 8 Channel Preset
Digital Reverb (SPRING, HALL, PLATE)
Digital Effects (Chorus, Tremolo, Tape Echo)
Speaker Simulator (LINE OUT)
DG80-210A:
80W (8Ω) Solid State Power Amp
25 cm Speaker (Celestion V10-60) x 2
DG80-112A:
80W (8Ω) Solid State Power Amp
30 cm Speaker (Celestion G12H-100) x 1
DG100-212A:
100W (4Ω) Solid State Power Amp
30 cm Speaker (Celestion Vintage 30) x 2
DG130HA:
130W (4Ω) Solid State Power Amp
Receive : Program change, Control Change (No. 7, 91, 92, 93, 94), Bulk In
Transmit : Bulk Out, Merge Out
Front Panel :
TRIM, OUTPUT, GAIN (TREMOLO SPEED), MASTER
(TREMOLO DEPTH), TREBLE (CHORUS SPEED),
HIGH MID (CHORUS DEPTH), LOW MID (CHORUS
LEVEL), BASS (TAPE ECHO TIME), PRESENCE
(TAPE ECHO FEED BACK), REVERB (TAPE ECHO
LEVEL)
Rear Panel :
LINE OUT volume, EFFECT BLEND
Switch :
AMP SELECT (LEAD1, LEAD2, DRIVE1, DRIVE2,
CRUNCH1, CRUNCH2, CLEAN1, CLEAN2), REVERB,
MODE, , , STORE, RECALL
AMP SELECT display LED x 8/MODE display LED x 3 REVERB type
display x 3/7 segment LED x 2 digits
Trim Level Display LED (Green) / Trim Clip Display LED (Red)
INPUT HIGH/LOW: Standard Phone Mono Jack SPEAKER
(DG80-210A: x2, DG80-112A: x2, DG100-212A: x1, DG130HA: x2):
Standard Phone Mono Jack EFFECT SEND/RETURN: Standard Phone
Mono Jack LINE OUT: Cannon Jack MIDI IN, MIDI OUT: 5 pin DIN
20 bit
20 bit
48 kHz
128
INPUT HIGH: –30dBm (THRU)/1MΩ INPUT LOW: –20dBm (THRU)/
1MΩ EFFECT RETURN: 0dBm/120kΩ
DG80-210A:
SPEAKER: 80W RMS/8Ω, 100W RMS/4Ω LINE OUT:
+4dBm/600Ω EFFECT SEND: 0dBm/2.2kΩ
DG80-112A:
SPEAKER: 80W RMS/8Ω, 100W RMS/4Ω LINE OUT:
+4dBm/600Ω EFFECT SEND: 0dBm/2.2kΩ
DG100-212A:
SPEAKER: 100W RMS/4Ω LINE OUT: +4dBm/600Ω
EFFECT SEND: 0dBm/2.2kΩ
DG130HA:
SPEAKER: 130W RMS/4Ω LINE OUT: +4dBm/600Ω
EFFECT SEND: 0dBm/2.2kΩ
U.S. and Canadian models : 120V, 60Hz
General model : 230V, 50Hz
DG80-210A:
100W
DG80-112A:
100W
DG100-212A:
100W
DG130HA:
140W
DG80-210A:
595 x 471 x 284 mm (23.43” x 18.5” x 11.2”)
DG80-112A:
542 x 510 x 284 mm (21.3” x 20.1” x 11.2”)
DG100-212A:
712 x 574 x 284 mm (28” x 22.6” x 11.2”) w/Caster
DG130HA:
711 x 250 x 284 mm (28” x 9.8” x 11.2”)
DG80-210A:
26.0 kg (57 lbs 5 oz)
DG80-112A:
25.0 kg (55 lbs 2 oz)
DG100-212A:
33.5 kg (73 lbs 13 oz)
DG130HA:
18.0 kg (39 lbs 11 oz)

* Specifications and design may change without notice.

MIDI Foot Controller

Foot Controller

FC7

for DG Stomp,
DG60FX-112

for DG80-112A, DG80-210A, DG100-212A,
DG130HA, DG60FX-112 and DG Stomp

The DG100-212A offers the DG sound in a
classic combo amp configuration. A
generous 100-watt, high quality power
amplifier is used to drive the twin Celestion
“Vintage 30” speakers for accurate
reproduction of the DG100-212A’s rich tube tone. Along with the DG preamp, all
components are fitted into a rugged chassis complete with large caster wheels.

32

Guitar Amplifier
Foot Controler Included

Guitar Amplifier
The new DG60FX-112 utilizes the power of the DG-Stomp as its preamp
section, and combines it with a 60-watt amplifier driving a single 12-inch
speaker. The amplifier comes complete with a special foot control unit that
allows selection of the “patches” and on-board effects.
DG60FX-112 Specifications
■ Digital Section: • Full Digital Signal Processing • 8 Channel Preamp • Digital Effects
(Compressor, Chorus, Flanger, Phaser, Rotary Speaker, Tremolo, Digital Delay, Tape Echo,
Spring Reverb, Hall Reverb, Plate Reverb) • Tap Tempo Function (Delay Time) • Speaker
Simulator (16 Types) • External Controller Function (EXP Pedal/MIDI): 8 Controllers/Parameters
• Wah Function • Tuner Function (Chromatic, Auto) ■ Analog Section: • 60 W Solid State Power
Amp • 30 cm Speaker (EMINENCE) x 1 ■ MIDI Functions: • Receive (Program Change, Control
Change, Bulk In) • Transmit (Program Change, Control Change, Bulk Out, Merge Out)
■ Switch: UP, DOWN, MANUAL, UTILITY, STORE, COMP, CHORUS, FLANGER, PHASER,
ROTARY, TREMOLO, DELAY, TAPE ECHO, SPRING, HALL, PLATE, SP. SIM ■ Controller:
AMP SELECT, GAIN, MASTER, TREBLE, MIDDLE, BASS, PRESENCE, COMP, SPEED, DEPTH,
TIME, FEEDBACK, LEVEL, REVERB, OUTPUT ■ Connections/Jacks: INPUT HIGH, LOW,
LINE OUT L/MONO, R, PHONES, POWER AMP IN, DIGITAL OUT, MIDI IN, MIDI OUT
■ A/D Converter: 20 bit + 3 bit Floating ■ D/A Converter: 20 bit ■ Sampling Frequency:
48 kHz ■ Memory Allocations: Preset (90), User (90) ■ Power: • U.S. and Canadian models :
120V, 60Hz • General model : 230V, 50Hz ■ Power Consumption: 70 W ■ Dimensions
(WxHxD): 513 x 491 x 291 mm (20.2” x 19.3” x 11.5”) ■ Weight: 17 kg (37 lbs 8 oz)
Foot Switch Unit
■ Connections/Jacks: EXP. PEDAL (Standard Stereo Phone Jack) ■ Dimensions (WxHxD) :
280 x55 x108 mm (11.0” x 2.2” x 4.3”) ■ Weight: 930 g (2 lbs 1 oz)

Hiram Bullock
http://www.hirambullock.com/

33

The DG60-112 features two independent channels each equipped with a full
complement of tone controls. Two 8-position knobs, one for each channel,
offer easy access to the preset amplifier types and a digitally simulated
spring reverb provides additional ambience when needed. The DG60-112’s
tone is faithfully reproduced with a 60-watt amplifier driving a single 12-inch
speaker, all fitted in a compact, easy to transport unit.
DG60-112 Specifications
■ Digital Section: Complete Digital Signal Processing, Internal 8 Channel Preset, Digital Reverb
(SPRING), Speaker Simulator (LINE OUT) ■ Analog Section: 60W (8Ω) Solid State Power Amp,
30 cm Speaker (EMINENCE) × 1 ■ Controller/Switch: • Front Panel : GAIN, MASTER,
TREBLE, HIGH MID, LOW MID, BASS, PRESENCE, REVERB • Rear Panel : EFFECT BLEND •
Switch : AMP select switch, for each channel (A/B), Channel select switch (A/B), SP MUTE
switch, EFFECT SEND/RETURN level switch ■ Indicator: Peak Level Display LED (Red)
■ Connection Jacks: • INPUT HIGH/LOW: Standard Phone Mono Jack • EFFECT SEND/
RETURN: Standard Phone Mono Jack • LINE OUT: Standard Phone Stereo Jack • FOOT SW
(CH SELECT, REVERB): Standard Phone Mono Jack ■ A/D Converter: 20 bit + 3 bit floating
■ D/A Converter: 20 bit ■ Sampling Frequency: 48 kHz ■ Input Level/Impedance: • INPUT
HIGH: –20dBm (THRU)/1MΩ • INPUT LOW: –10dBm (THRU)/1MΩ ■ Output Level/Impedance:
• SPEAKER: 60W RMS/8Ω • LINE OUT: +2dBm/47Ω • EFFECT SEND: -2dBm/1kΩ ■ Power
Requirements: • U.S. and Canadian models: 120V, 60Hz • General model: 230V, 50Hz
■ Power Consumption: 70W ■ Dimensions (W×H×D): 542 × 504 × 276mm (21.3” × 19.8” ×
10.9”) ■ Weight: 18.0 kg (39 lbs 11 oz)

Doyle Bramhall
Doyle plays with Eric Clapton/
BB king and Roger Waters.
http://www.doylebramhall.com/frontpage40.htm

Guitar Pre Amplifier

This is where it started. The DG-1000 preamp delivers rich tube tone with its
ECM technology. Match its sound capabilities with components of your liking
for a truly personalized sound.
DG-1000 Specifications
■ A/D Converter: 20 bit + 5 bit Floating ■ D/A Converter: 20 bit ■ Sampling Frequency:
48kHz ■ Memory: 128 ■ Input Impedance: 1MΩ (Input Jack) ■ Output Impedance: 1kΩ
(Output Jack) ■ Controllers: • Analog: TRIM, OUTPUT • Digital: GAIN, MASTER, TREBLE,
HIGH MID, LOW MID, BASS, PRESENCE, AMP SELECT (LEAD1, LEAD2, DRIVE1, DRIVE2,
CRUNCH1, CRUNCH2, CLEAN1, CLEAN2), , , STORE, RECALL, MIDI ■ Display: AMP
SELECT display LED × 8, MODE display LED × 3, 7 Segment LED × 2 digits ■ Indicator: TRIM
level display LED (green) TRIM clip display LED (red) ■ Power Requirements: U.S. and Canadian
models : 120V, 60Hz General model : 230V, 50Hz ■ Power Consumption: 20Watts ■
Dimensions (W×H×D): 480 × 89 × 275 mm ( 18.9” × 3.5” × 10.8”) ■ Weight: 6.0 kg (13 lbs. 4 oz)

Ty Tabor
Speaker Enclosure

(King’s X)
http://www.tytabor.com/
http://www.kingsx.net/

A single Celestion “G12H-100” 12-inch
speaker mounted in the S112’s rugged
enclosure provides excellent full range
tone. Stacked with a DG80-112A will
give your system more presence both
sonically and visually.
S112 Specifications

■ Speakers: 30cm speaker (G12H-100) × 1
• Speaker Size: 30cm (12”) • Voice Coil Size: 44ø
mm • Magnet: Ferrite 1.42kg (50oz) • Frequency
Range: 82Hz-5.5kHz • Sensitivity: 100dB (1m/W)
• Power Rating: 100W (RMS) • Nominal
Impedance: 8Ω • Fundamental Frequency: 82Hz
■ Dimensions (W×H×D): 542 × 510 × 284mm (21.3”
× 20” × 11.2”) ■ Weight: 16 kg (35 lbs 4.4 oz)
■ Accessory: Speaker Cable

DG80-112A+S112

Allan Holdsworth

Speaker Enclosure

http://www.allanholdsworth.com/

Four Celestion “Vintage 30” speakers
enclosed in a rugged cabinet
provide the utmost in classic tone
reproduction.
S412V Specifications
■ Speakers: 30cm speaker (Celestion
“Vintage 30”) × 4 • Speaker Size: 30cm (12”)
• Voice Coil Size: 44ø mm • Magnet: Ferrite
1.42kg (31Ibs 2oz) • Frequency Range:
70Hz-5kHz • Sensitivity: 100dB (1m/W)
• Power Rating: 60W (RMS) × 4 • Nominal
Impedance: 8Ω • Fundamental Frequency:
70Hz ■ Impedance: 8Ω ■ Dimensions
(W×H×D): 765 × 820 × 359mm (30.1” × 32.2”
× 14.1”) (w/casters) ■ Weight: 44.0kg (97Ibs)
(w/casters) ■ Accessory: Speaker Cable

DG130HA+S412V

Visit our DG homepage at
http://www.yamaha.co.jp/english/product/guitar/dg/
On our homepage you'll find more information and free DG preset data downloads
for the DG series amplifiers.

Richie Kotzen
(Mr. Big)
http://richiekotzen.com

34



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Page Count                      : 4
Page Layout                     : SinglePage
Modify Date                     : 2016:11:26 02:38:22+09:00
Create Date                     : 2001:01:16 11:55:50
Producer                        : Acrobat Distiller 4.0 for Macintosh
Subject                         : 
Creator                         : Adobe PageMaker 6.0
Title                           : G&B union_US_l
Author                          : 

EXIF Metadata provided by EXIF.tools