Yamaha DGX 660 Owner’s Manual Owner's Dgx660 En Om A0

User Manual: Yamaha DGX-660 Owner's Manual

Open the PDF directly: View PDF .
Page Count: 96

Download
Open PDF In Browser	View PDF

Setting Up
Reference

Basic Guide

Owner’s Manual

We recommend that you read this manual carefully so that you can fully take advantage of the advanced and
convenient functions of the instrument. We also recommend that you keep this manual in a safe and handy place
for future reference.
Before using the instrument, be sure to read “PRECAUTIONS” on pages 5–6.

Appendix

Thank you for purchasing this Yamaha Digital Piano!

Keyboard Stand Assembly

For information on assembling the keyboard stand, refer to the instructions
on page 12 of this manual.

For DGX-660

SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply
(adapter). DO NOT connect this product to any power supply or
adapter other than one described in the manual, on the name
plate, or specifically recommended by Yamaha.
WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not
recommended! If you must use an extension cord, the minimum
wire size for a 25’ cord (or less ) is 18 AWG. NOTE: The smaller
the AWG number, the larger the current handling capacity. For
longer extension cords, consult a local electrician.
This product should be used only with the components supplied
or; a cart, rack, or stand that is recommended by Yamaha. If a
cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct
at the time of printing. However, Yamaha reserves the right to
change or modify any of the specifications without notice or obligation to update existing units.
This product, either alone or in combination with an amplifier and
headphones or speaker/s, may be capable of producing sound
levels that could cause permanent hearing loss. DO NOT operate
for long periods of time at a high volume level or at a level that is
uncomfortable. If you experience any hearing loss or ringing in the
ears, you should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period
before damage occurs.
Some Yamaha products may have benches and / or accessory
mounting fixtures that are either supplied with the product or as
optional accessories. Some of these items are designed to be
dealer assembled or installed. Please make sure that benches
are stable and any optional fixtures (where applicable) are well
secured BEFORE using.
Benches supplied by Yamaha are designed for seating only. No
other uses are recommended.

This product may also use “household” type batteries. Some of
these may be rechargeable. Make sure that the battery being
charged is a rechargeable type and that the charger is intended for
the battery being charged.
When installing batteries, never mix old batteries with new ones, and
never mix different types of batteries. Batteries MUST be installed
correctly. Mismatches or incorrect installation may result in overheating and battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep all
batteries away from children. Dispose of used batteries promptly
and as regulated by the laws in your area. Note: Check with any
retailer of household type batteries in your area for battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for some
reason its useful life is considered to be at an end, please
observe all local, state, and federal regulations that relate to the
disposal of products that contain lead, batteries, plastics, etc. If
your dealer is unable to assist you, please contact Yamaha
directly.

NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The
model number, serial number, power requirements, etc., are
located on this plate. You should record the model number, serial
number, and the date of purchase in the spaces provided below
and retain this manual as a permanent record of your purchase.

NOTICE:
Service charges incurred due to a lack of knowledge relating to
how a function or effect works (when the unit is operating as
designed) are not covered by the manufacturer’s warranty, and
are therefore the owners responsibility. Please study this manual
carefully and consult your dealer before requesting service.

Model

ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and
environmentally friendly. We sincerely believe that our products
and the production methods used to produce them, meet these
goals. In keeping with both the letter and the spirit of the law, we
want you to be aware of the following:
Battery Notice:
This product MAY contain a small non-rechargeable battery which
(if applicable) is soldered in place. The average life span of this type
of battery is approximately five years. When replacement becomes
necessary, contact a qualified service representative to perform the
replacement.

92-BP (bottom)

DGX-660

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

For DGX-660
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party :
Address :
Telephone :
Type of Equipment :
Model Name :

Yamaha Corporation of America
6600 Orangethorpe Ave., Buena Park, Calif. 90620
714-522-9011
Digital Piano
DGX-660

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference
that may cause undesired operation.
See user manual instructions if interference to radio reception is suspected.
* This applies only to products distributed by YAMAHA
CORPORATION OF AMERICA.

(FCC DoC)

For AC adaptor and DGX-660

FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with
the requirements listed in FCC Regulations, Part 15 for Class
"B" digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this
product in a residential environment will not result in harmful
interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used
according to the instructions found in the users manual, may
cause interference harmful to the operation of other electronic
devices. Compliance with FCC regulations does not guarantee
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

that interference will not occur in all installations. If this product
is found to be the source of interference, which can be determined by turning the unit "OFF" and "ON", please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected
by the interference.
Utilize power outlets that are on different branch (circuit breaker
or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to distribute
this type of product. If you can not locate the appropriate
retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park,
CA90620
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
(class B)

DGX-660

For AC adaptor
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
(fcc_sengen)

CAN ICES-3 (B)/NMB-3(B)
• This applies only to products distributed by Yamaha Canada Music Ltd.
• Ceci ne s’applique qu’aux produits distribués par Yamaha Canada Musique Ltée.
(can_b_01)

Explanation of Graphical Symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS
1
2
3
4
5
6
7

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during
lightning storms or when unused for long periods of
time.
14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has
been dropped.

WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
(UL60065_03)

DGX-660 Owner’s Manual

PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.

For AC adaptor

WARNING

CAUTION

• This AC adaptor is designed for use with only Yamaha electronic instruments. Do
not use for any other purpose.
• Indoor use only. Do not use in any wet environments.

• When setting up, make sure that the AC outlet is easily accessible. If some
trouble or malfunction occurs, immediately turn off the power switch of the
instrument and disconnect the AC adaptor from the outlet. When the AC adaptor
is connected to the AC outlet, keep in mind that electricity is flowing at the
minimum level, even if the power switch is turned off. When you are not using
the instrument for a long time, make sure to unplug the power cord from the wall
AC outlet.

For DGX-660

WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the
following:

Power supply/AC adaptor

Water warning

• Do not place the power cord near heat sources such as heaters or radiators. Also,
do not excessively bend or otherwise damage the cord, or place heavy objects on
it.
• Only use the voltage specified as correct for the instrument. The required voltage
is printed on the name plate of the instrument.
• Use the specified adaptor (page 91) only. Using the wrong adaptor can result in
damage to the instrument or overheating.

• Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place on it any containers (such as vases, bottles or glasses)
containing liquids which might spill into any openings. If any liquid such as
water seeps into the instrument, turn off the power immediately and unplug the
power cord from the AC outlet. Then have the instrument inspected by qualified
Yamaha service personnel.
• Never insert or remove an electric plug with wet hands.

• Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.

Fire warning
• Do not put burning items, such as candles, on the unit. A burning item may fall
over and cause a fire.

Do not open
• This instrument contains no user-serviceable parts. Do not open the instrument
or attempt to disassemble or modify the internal components in any way. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.

If you notice any abnormality
• When one of the following problems occur, immediately turn off the power switch
and disconnect the electric plug from the outlet. Then have the device inspected
by Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.

DMI-5

1/2
DGX-660 Owner’s Manual

CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:

Power supply/AC adaptor

Connections

• Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.

• Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all components,
set all volume levels to minimum.

• When removing the electric plug from the instrument or an outlet, always hold
the plug itself and not the cord. Pulling by the cord can damage it.

• Be sure to set the volumes of all components at their minimum levels and
gradually raise the volume controls while playing the instrument to set the
desired listening level.

• Remove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.

Handling caution
Assembly

• Do not insert a finger or hand in any gaps on the instrument.
• Never insert or drop paper, metallic, or other objects into the gaps on the panel or
keyboard. This could cause physical injury to you or others, damage to the
instrument or other property, or operational failure.

• Read carefully the attached documentation explaining the assembly process.
Failure to assemble the instrument in the proper sequence might result in
damage to the instrument or even injury.

• Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the buttons, switches or connectors.

Location
• Do not place the instrument in an unstable position where it might accidentally
fall over.
• When transporting or moving the instrument, always use two or more people.
Attempting to lift the instrument by yourself may damage your back, result in
other injury, or cause damage to the instrument itself.

• Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing
loss. If you experience any hearing loss or ringing in the ears, consult a
physician.

• Before moving the instrument, remove all connected cables, to prevent damage
to the cables or injury to anyone who might trip over them.
• When setting up the product, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet. Even when the power switch is
turned off, electricity is still flowing to the product at the minimum level. When
you are not using the product for a long time, make sure to unplug the power
cord from the wall AC outlet.
• Use only the stand specified for the instrument. When attaching it, use the
provided screws only. Failure to do so could cause damage to the internal
components or result in the instrument falling over.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

Always turn the power off when the instrument is not in use.
Even when the [

] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

DMI-5

DGX-660 Owner’s Manual

2/2

NOTICE
To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the
notices below.
 Handling
• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio
may generate noise. When you use the instrument along with an application on your iPad, iPhone or iPod touch, we recommend that you set “Airplane
Mode” to “ON” on that device in order to avoid noise caused by communication.
• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day)
to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° –
40°C, or 41° – 104°F.)
• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
 Maintenance
• When cleaning the instrument, use a soft and dry/slightly damp cloth. Do not use paint thinners, solvents, alcohol, cleaning fluids, or chemicalimpregnated wiping cloths.
• During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the instrument. If water is left, the
wooden parts may absorb the water and be damaged. Make sure to wipe any water off immediately with a soft cloth.
 Saving data
• Some of the data of this instrument (page 52) are retained when the power is turned off. However, the saved data may be lost due to some failure, an
operation mistake, etc. Save your important data onto USB flash drive/an external device such as a computer (page 76). For information about the
handling of USB flash drive, refer to page 80.
• The recorded Songs are lost when you turn off the power to the instrument. This also occurs when the power is turned off by the Auto Power Off function
(page 19). Save the data to the instrument, or to USB flash drive/an external device such as a computer (page 76). However, the data saved to the
instrument may be lost due to some failure, an operation mistake, etc. Save your important data onto USB flash drive/an external device such as a
computer (page 76). For information about the handling of USB flash drive, refer to page 80.
• To protect against data loss through USB flash drive damage, we recommend that you save your important data onto spare USB flash drive or an external
device such as a computer as backup data.

Information
 About copyrights
• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal
use.
• This product incorporates and bundles contents in which Yamaha owns copyrights or with respect to which Yamaha has license to use others' copyrights.
Due to copyright laws and other relevant laws, you are NOT allowed to distribute media in which these contents are saved or recorded and remain virtually
the same or very similar to those in the product.
* The contents described above include a computer program, Accompaniment Style data, MIDI data, WAVE data, voice recording data, a score, score
data, etc.
* You are allowed to distribute medium in which your performance or music production using these contents is recorded, and the permission of Yamaha
Corporation is not required in such cases.
 About functions/data bundled with the instrument
• Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.
 About this manual
• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your
instrument.
• Apple, iPhone, iPad and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

The model number, serial number, power requirements, etc., may be
found on or near the name plate, which is at the bottom of the unit.
You should note this serial number in the space provided below and
retain this manual as a permanent record of your purchase to aid
identification in the event of theft.

Model No.
Serial No.
The name plate is located on the bottom of the unit.
(bottom_en_01)

DGX-660 Owner’s Manual

About Manuals
This instrument has the following documents and instructional materials.
 Included Documents
Owner’s Manual (this book)
• Setting Up
Please read this section first.
• Basic Guide
This section explains how to use the basic functions. Refer to this section while
playing the instrument.
• Reference
This section explains how to make detailed settings for the various functions of the
instrument.
• Appendix
This section includes troubleshooting information and specifications.
Data List
Contains various important preset content lists such as those of Voices, Styles, and Effects.
 Online Materials (from Yamaha Downloads)
MIDI Reference
Contains MIDI related information such as MIDI Data Format and the MIDI Implementation Chart.
MIDI Basics (only in English, French, German and Spanish)
Contains basic explanations about MIDI.
iPhone/iPad Connection Manual (only in English, French, German and Spanish)
Explains how to connect the instrument to smart devices, such as an iPhone, iPad, etc.
Computer-related Operations
Includes instructions on connecting this instrument to a computer, and operations related to transferring files and MIDI data.
To obtain these manuals, access the Yamaha Downloads, enter the model name for searching the desired files.
Yamaha Downloads http://download.yamaha.com/
 Online Material (for Yamaha Online members)
Song Book (only in English, French, German and Spanish)
Contains music scores for the preset Songs (excluding the Over View Demo Song and Songs 1–11) of
this instrument. After completing the user registration at the website below, you can download this
Song Book free of charge.
Yamaha Online Member https://member.yamaha.com/myproduct/regist/
You will need the PRODUCT ID on the sheet “Online Member Product Registration” packaged with this manual in order to fill out the User Registration form.

Included Accessories
• Owner’s Manual (this book)
• Data List
• Keyboard Stand (page 12)
• Footswitch (page 21)
• Music Rest
• AC Adaptor *1
• Warranty *1
• Online Member Product Registration *2
*1: May not be included depending on your particular locale.
Check with your Yamaha dealer.
*2: The PRODUCT ID on the sheet will be needed when you
fill out the User Registration form.

DGX-660 Owner’s Manual

Music Rest
Insert the music rest
into the slots as shown.

Table of Contents

Keyboard Stand Assembly

Panel Controls and Terminals

Front Panel.....................................................................16
Rear Panel .....................................................................17

Setting Up

Power Requirements......................................................18
Turning the Power On/Off ..............................................18
Setting the Volume .........................................................19
Auto Power Off Function ................................................19
Connecting Headphones or External Audio Equipment
(PHONES/OUTPUT Jack) .........................................20
Connecting a Footswitch (SUSTAIN Jack).....................21
Connecting a Pedal Unit (PEDAL UNIT jack).................22

MAIN Display

Basic Controls

Basic Guide
Enjoying Piano Performance (Piano Room)

Playing a Piano Performance in the Piano Room ..........25
Recording your Performance as Audio in the Piano Room ...26

Try Playing a Variety of Instrument Voices

Selecting a Main Voice...................................................27
Playing the “Grand Piano” (Piano Reset) .......................27
Layering Two Voices—Dual Voice .................................28
Playing a Split Voice in the Left Hand area ....................28
Using the Metronome .....................................................29
Adding Harmony ............................................................31

Playing Styles

Using the Music Database .............................................33
Chords............................................................................34
Using the Smart Chord feature ......................................35
Calling up Optimum Styles for Your Performance
(Style Recommender) ................................................37

Playing Songs and Audio Files

Listening to the Overview Demo ....................................38
Playing Back a Song or Audio File .................................39
Fast Forward, Rewind, and Pause .................................40
A-B Repeat.....................................................................40
Turning Each Track On/Off ............................................40
Displaying the Song Score .............................................41
Displaying the Lyrics ......................................................41

Using the Song Lesson Feature

Three Types of Song Lesson .........................................42
Practicing with Song Lesson ..........................................42
Making Practice Perfect—Repeat & Learn.....................43

Recording Your Performance

Song Recording .............................................................44
Recording to a Specified Track ......................................46
Clearing a User Song .....................................................48
Clearing a Specified Track from a User Song ................48
Audio Recording.............................................................49

Memorizing Your Favorite Panel Settings

Memorizing Panel Settings to the Registration Memory....50
Recalling Panel Settings from the Registration Memory ...51

Backup Parameters and Initialization

Selecting a Reverb Type................................................53
Selecting a Chorus Type................................................53
Selecting a DSP Type ....................................................54
Panel Sustain .................................................................55
Pitch Controls—Transpose ............................................55
Pitch Controls—Tuning ..................................................56
Pitch Controls—the PITCH BEND wheel .......................56
Touch Response Sensitivity...........................................57
Selecting an EQ Setting for the Best Sound ..................57
Setting the Output Gain Level ........................................58
Speaker On/Off Setting ..................................................58
Intelligent Acoustic Control (IAC) ...................................59

Voice Settings

Setting Up

Handy Performance Features

Selecting a Dual Voice ...................................................60
Selecting a Split Voice ...................................................60
Voice Editing ..................................................................60

Style (Auto Accompaniment) Functions

Style Variations—Sections.............................................61
Changing the Tempo .....................................................63
Adjusting the Volume of the Style ..................................63
Playing Chords Without Style Playback
(Stop Accompaniment) ..............................................63
Setting the Split Point.....................................................64
Setting the Chord Fingering ...........................................64
Looking Up Chords Using the Chord Dictionary ............65

Song and Audio Settings

Basic Guide

Background Music (BGM) Playback ..............................66
Random Playback ..........................................................66
Tempo Setting of the Song ............................................67
Song Volume .................................................................67
Audio Volume.................................................................67
Changing the Voice of the Song ....................................68
Specifying the Channel for the Lesson Part...................68

Connecting a Microphone and Singing Along with
Your Performance
69
Connecting a Microphone ..............................................69
Selecting a Preset Setting..............................................70
Making and Saving the Microphone Settings.................70
Calling Up the Microphone Settings Saved to USER.....71

The Functions

Function List...................................................................73

Connections
– Using Your Instrument with Other Devices –

Reference

Special Features

Reference

Connecting an Audio Device (AUX IN jack) ...................76
Connecting to a Computer (USB TO HOST terminal)....76
Connecting to an iPhone/iPad (USB TO DEVICE,
USB TO HOST terminals)..........................................77
Wireless LAN Settings ...................................................77

USB Flash Drive Operations

Connecting a USB Flash Drive ......................................81
Formatting a USB Flash Drive .......................................82
Saving a Registration Memory to USB Flash Drive .......83
Saving a User Song to USB Flash Drive........................84
Converting a User Song to an Audio file ........................85
Loading Files from a USB Flash Drive ...........................86
Deleting files from a USB Flash Drive............................87
Deleting User Data from the Instrument.........................87

Appendix
Troubleshooting........................................................... 88
Messages...................................................................... 89
Specifications............................................................... 90
Index.............................................................................. 92

Backup Parameters........................................................52
Initialization ....................................................................52
DGX-660 Owner’s Manual

Appendix

About Manuals .................................................................8
Included Accessories .......................................................8
Compatible Format.........................................................10

Compatible Format
GM System Level 1
“GM System Level 1” is an addition to the MIDI standard which ensures that any GM-compatible music data can be accurately played by any GM-compatible tone generator, regardless of
manufacturer. The GM mark is affixed to all software and hardware products that support GM
System Level.
XF
The Yamaha XF format enhances the SMF (Standard MIDI File) standard with greater functionality and open-ended expandability for the future. The instrument is capable of displaying lyrics
when an XF file containing lyric data is played.
Style File Format Guitar Edition
“SFF (Style File Format)” is an original Style file format by Yamaha which uses a unique conversion system to provide high-quality automatic accompaniment based on a wide range of chord
types. “SFF GE (Guitar Edition)” is an enhanced format of SFF, which features improved note
transposition for guitar tracks.
XGlite
As its name implies, “XGlite” is a simplified version of Yamaha’s high-quality XG tone generation format. Naturally, you can play back any XG song data using an XGlite tone generator. However, keep in mind that some songs may play back differently compared to the original data, due
to the reduced set of control parameters and effects.

DGX-660 Owner’s Manual

Special Features
Amazingly Authentic Piano Sound and “Piano Room” Performance Controls
Page 27, 25

The DGX-660 features an authentically expressive piano Voice (“Natural! Grand Piano”; Voice 001) meticulously
sampled from a concert grand piano—perfect for playing not only classical compositions but also piano pieces in
any style. No matter what instrument settings have been made, you can instantly call up the Piano Voice by simply
pressing and holding the [PIANO ROOM] button.
In addition, the instrument has a special Piano Room feature that provides even greater piano performance enjoyment with highly intuitive control. Piano Room lets you select the desired piano type as well as different room
ambiences, giving you a complete, realistic piano experience—as if you were playing a real piano.

Graded Hammer Standard Keyboard
Thanks to our experience as the world’s leading manufacturer of acoustic pianos, we’ve developed a keyboard
with action that’s virtually indistinguishable from the real thing. Just as on a traditional acoustic piano, the keys of
the lower notes have a heavier touch, while the higher ones are more responsive to lighter playing. The keyboard’s
sensitivity can even be adjusted to match your playing style. This Graded Hammer technology gives the DGX-660
remarkably authentic touch in a lightweight instrument.

Amazingly Realistic and Dynamic Sounds

Page 27

Yamaha’s authentic Voices (especially the highly acclaimed Live!, Sweet! and Cool! Voices) deliver incredibly
natural and dynamic sound—with all the nuances of the original instrument, from delicate to powerful.

Play Along with Styles

Page 32

The DGX-660 also has complete and fully automatic accompaniment features with the Styles. These Styles provide the equivalent of a full backing band covering wide variety of genres—from waltz and swing to 8-beat and
euro-trance, plus much more. Select a Style that matches the music you want to play, or experiment with new
Styles to expand your musical horizons. And if it’s difficult to select the right Style from the huge variety available, use the Style Recommender function, which calls up a list of suggested Styles, based on a sample rhythm
you play. Also, this instrument features a Smart Chord function, allowing you to simply press single keys, and yet
play various chord progressions that authentically match the music genre and key you specify—giving you even
greater enjoyment from the Styles!

Easy Performance with Music Notation Display

Page 41

When you play back a Song, the corresponding score is shown on the display. This is a great way to learn how to
read music. If the Song contains lyric and chord data, the lyrics and chords also appear in the score.

Connect a Microphone and Sing Along with Your Own Performance

Page 69

Simply connect a microphone to the DGX-660, sing along with your keyboard performance or with Song playback—and hear everything mixed perfectly together from the instrument’s speakers. Three convenient preset settings are provided for different vocal performance preferences and situations, and you can even make and save
your own original microphone settings.

DGX-660 Owner’s Manual

Setting Up

Keyboard Stand Assembly
CAUTION

Setting Up

Read these cautions carefully before you assemble or use the keyboard stand.
These cautions are to promote safe use of the stand and to prevent injury and damage from occurring to you and others. By following these cautions carefully, your keyboard stand will provide you with safe and prolonged use.
• Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the
sequence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use the correct screw size, as indicated below. Use of incorrect screws can cause damage.
• Use the stand after assembly is complete. An uncompleted stand may overturn or the keyboard may drop.
• Always place the stand on a flat, stable surface. Placing the stand on uneven surfaces may cause it to become unstable or overturn, the keyboard to drop, or injury.
• Do not use the stand for anything other than its designed purpose. Placing other objects on the stand may result in the object
dropping or the stand overturning.
• Do not apply excessive force to the keyboard as it may cause the stand to overturn or the keyboard to drop.
• Make sure the stand is sturdy and safe, and all screws have been tight and firm before use. If not, the stand may overturn, the
keyboard may drop, or may result in injury to the user.
• To disassemble, reverse the assembly sequence given below.

Have a phillips-head (+) screwdriver of the appropriate size ready.

The parts shown in the “Assembly Parts” illustration will be used. Follow the assembly
instructions and select the parts as needed.

Assembly Parts

Back board

R
Side
boards

Stand
bases

A (1 pc.)

q Joint connectors

B (1 pc.)

C (2 pcs.)

w Metal brackets

(4 pcs.)

r 6 x 70 mm roundhead
screws (4 pcs.)

DGX-660 Owner’s Manual

e 3 x 8 mm roundhead
screws (12 pcs.)

t 6 x 30 mm roundhead
screws (4 pcs.)

y 5 x 16 mm roundhead
screws (4 pcs.)

Keyboard Stand Assembly

2
w Metal bracket w Metal bracket

w Metal bracket w Metal bracket

(A)

(B)

Setting Up

(C)

e 3 x 8 mm

roundhead
screws

3
q Joint
connectors

Attach the metal brackets.
Attach the metal brackets w to the top of the side
boards, using the screws e as shown.

Attach the stand bases.
Insert the joint connectors q into the side boards
as shown. The joint connectors have been installed
properly if you can see the screw head on the connector.
NOTE

• If you put the connectors in wrong direction and want to
take them out, tap around the holes on the boards.

Attach the “L” (Left) and “R” (Right) stand bases
to the bottom of the side boards, using the screws
r. “L” (Left) and “R” (Right) are marked on the
upper surfaces of the stand bases. If you have trouble fastening the screws, use a screwdriver to
rotate the joint connectors so that the connector
holes are aligned with the screw holes on the stand
bases.

“L”
“R”

r 6 x 70 mm
roundhead screws

DGX-660 Owner’s Manual

Keyboard Stand Assembly

4
Setting Up

t 6 x 30 mm roundhead screws

Attach the back board.
Attach the back board, using the screws t. Check
the back-to-front orientation for the side boards.
Make sure the non-colored surface is facing down.
CAUTION
• Be careful not to drop the back board or touch the
sharp metal fittings.
NOTE

• If you have purchased a pedal unit (sold separately),
attach the pedal unit before proceeding to the next step.
Refer to the instructions provided with your pedal unit.
• For information on the pedal functions, refer to page 22.

Be sure to place your hands at
least 10 cm from either end of the
keyboard when positioning it.

Put the keyboard on the stand.
Check the back-to-front orientation for stand, and
carefully place the keyboard on the side boards.
Slowly move the keyboard so that the holes on the
bottom of the keyboard are properly aligned with
the holes on the angle brackets.
CAUTION

At least
10 cm

• Be careful not to drop the keyboard or to get your fingers caught between the keyboard and the stand
parts.
• Do not hold the keyboard in any position other than
the position shown in the illustration.
At least
10 cm

DGX-660 Owner’s Manual

Keyboard Stand Assembly

Install the keyboard to the stand.
Fix the keyboard to the angle brackets, using the
screws y.

Setting Up

y 5 x 16 mm
roundhead
screws

Post-assembly checklist
Once you’ve assembled the stand, check the following
points:
• Are there any parts left over?
 If so, read the assembly instructions again and correct any errors you might have made.
• Is the instrument clear of doors and other movable fixtures?
 If not, move the instrument to an appropriate location.
• Does the instrument make a rattling noise when you
play it or move it?
 If so, properly tighten all screws.
• Also, if the keyboard makes a creaking noise or seems
unsteady when you play it, refer carefully to the assembly instructions and diagrams and retighten all screws.

DGX-660 Owner’s Manual

Panel Controls and Terminals
Front Panel
Song category list

Style category list

Setting Up
e

u
w
i

!0
!3

Front Panel
q
w
e
r
t
y
u

i
o
!0

!1
!2
!3

[ ] (Standby/On) switch..................... page 18
[MASTER VOLUME] control ................ page 19
[DEMO/BGM] button .................... pages 38, 66
[SCORE] button....................................page 41
[LYRICS] button....................................page 41
[REC] button ........................... pages 44, 46, 49
LESSON START
[WAITING] button..............................page 43
[YOUR TEMPO] button .....................page 43
[MINUS ONE] button.........................page 43
[SMART CHORD] button......................page 35
[MIC SETTING] button .........................page 69
Song Track
[1]–[5], [A] buttons............................page 40
Lesson
[R] and [L] buttons ...........................page 42
[METRONOME ON/OFF] button ..........page 29
[TEMPO/TAP] button.................... pages 63, 67
SONG/AUDIO
[REPEAT&LEARN] button................page 43
[A-B REPEAT] button........................page 40
[REW] button.....................................page 40
[FF] button.........................................page 40
[PAUSE] button .................................page 40
[START/STOP] button .......................page 39

DGX-660 Owner’s Manual

!4 STYLE
[ACMP ON/OFF] button.................... page 32
[INTRO/ENDING/rit.] button ............. page 61
[MAIN/AUTO FILL] button ................ page 61
[SYNC STOP] button ........................ page 62
[SYNC START] button....................... page 33
[START/STOP] button....................... page 33
!5 REGIST MEMORY
[BANK], [1]–[4] buttons.................... page 50
!6 CATEGORY [r] and [f] buttons ....... page 24
!7 [EXIT] button ........................................ page 23
!8 [EXECUTE] button ............................... page 82
!9 DATA ENTRY
Dial, Number buttons [0]–[9],
[+] and [-] buttons............................. page 24
@0 [FILE CONTROL] button...................... page 82
@1 [FUNCTION] button.............................. page 72
@2 [PIANO ROOM] button......................... page 25
@3 [SONG/AUDIO] button ......................... page 39
@4 [STYLE] button..................................... page 32
@5 [VOICE] button ..................................... page 27
@6 [MUSIC DATABASE] button................. page 33
@7 [SPLIT ON/OFF] button ....................... page 28
@8 [DUAL ON/OFF] button ........................ page 28
@9 [HARMONY ON/OFF] button ............... page 31
#0 [PITCH BEND] wheel ........................... page 56
#1 USB TO DEVICE terminal ...... pages 77, 80, 81

Panel Controls and Terminals

Voice category list

Music Database category list

Setting Up

Display (page 23)

!9
!6
@0

!7 !8
@1
@2

!5
@7 @8

A-1

Rear Panel

Rear Panel
#2
#3
#4
#5
#6
#7
#8

CONTRAST knob .................................page 23
USB TO HOST terminal.......... pages 74, 76, 77
SUSTAIN jack .......................................page 21
PEDAL UNIT jack .................................page 22
PHONES/OUTPUT jack ........................page 20
AUX IN jack........................................... page 76
MIC VOLUME knob ..............................page 69

#9 MIC INPUT jack .................................... page 69
$0 DC IN jack ............................................. page 18

“Press & Hold” symbol
By holding down one of the buttons having this symbol, you can call up an alternate function, other than
the one called up when simply pressing.

DGX-660 Owner’s Manual

Setting Up
Power Requirements
Setting Up

WARNING
• Use the specified adaptor (page 91) only. Using the wrong
adaptor can result in damage to the instrument or overheating.

Connect the AC power adaptor to the DC
IN jack.

Plug the AC power adaptor into an AC
outlet.

For the Power Adaptor with a Removable Plug
Do not remove the plug from the power adaptor. If the
plug is removed accidentally, slide the plug into place
without touching the metallic parts, and then push the
plug in completely until it clicks.
Plug

Slide the plug
as indicated

CAUTION
• Unplug the AC Power Adaptor when not using the instrument, or during electrical storms, to avoid the possibility of
physical injury to you or others, or damage to the instrument or other property.

* The shape of the plug differs depending on locale.

WARNING
• Make sure to keep the plug attached to the AC adaptor.
Using the plug alone can cause electric shock or fire.
• Never touch the metallic section when attaching the
plug. To avoid electric shock, short circuit or damage,
also be careful that there is no dust between the AC
adaptor and plug.

2
AC power
adaptor

AC outlet

Turning the Power On/Off
Turn down the MASTER VOLUME control to “MIN”
then press the [ ] (Standby/On) switch to turn on the
power. While playing the keyboard, adjust the MASTER VOLUME control. To turn off the power, press
the [ ] (Standby/On) switch again for a second.
CAUTION
• When using a power adaptor, even when the power is off, a
small amount of electricity is still being consumed by the
instrument. When you are not using the instrument for a
long time, make sure to unplug the AC power adaptor from
the wall AC outlet.

DGX-660 Owner’s Manual

Setting Up

Setting the Volume
CAUTION

Setting Up

To adjust the volume level of the entire keyboard
sound, use the MASTER VOLUME control located at
the left of the panel. Play the keyboard to actually produce sound while you adjusting the volume to the
desired level.

• Do not use the instrument for a long period of time at a
high or uncomfortable volume level, since this can cause
permanent hearing loss. If you experience any hearing loss
or ringing in the ears, consult a physician.

Auto Power Off Function
To prevent unnecessary power consumption, this
instrument features an Auto Power Off function that
automatically turns the power off if the instrument is
not operated for a specified period of time. The
amount of time that will elapse before the power is
automatically turned off is set by default to 30 minutes.
To disable the Auto Power Off function:
Turn off the power, then press the [ ] (Standby/On)
switch to turn on the power while holding down the
lowest key. Make sure to hold down lowest key until a
message appears at the top left of the display after
pressing the power switch.

To set the time that elapses before Auto Power Off
is executed:
Press the [FUNCTION] button, press the CATEGORY [r] or [f] button several times until “Auto
Power Off” appears, then select the desired value by
using the dial.
Settings: OFF, 5, 10, 15, 30, 60, 120 (min.)
Default value: 30 min.
NOTICE
• The recorded Song will be lost if the power is automatically
turned off without executing the save operation. Make sure
to save your recorded Song before the power turns off.
• Depending on the instrument status, the power may not
turn off automatically, even after the elapse of the specified
period of time. Always turn off the power manually when
the instrument is not in use.
• When the instrument is not operated for a specified period
of time while connected to an external device such as an
amplifier, speaker or computer, make sure to follow the
instructions in the Owner’s Manual to turn off the power to
the instrument and the connected devices, in order to protect the devices from damage. If you do not want the
power to turn off automatically when a device is connected, disable Auto Power Off.

DGX-660 Owner’s Manual

Setting Up

Connecting Headphones or External Audio Equipment (PHONES/OUTPUT Jack)
Setting Up

CAUTION
• Before connecting the instrument to other electronic components, turn off the power of all the components. Also,
before turning any components on or off, make sure to set
all volume levels to minimum (0). Otherwise, damage to
the components, electrical shock, or even permanent
hearing loss may occur.

Headphones
Any pair of stereo headphones with a standard stereo
phone plug can be plugged in here for convenient
monitoring. The speakers are automatically shut off
when a plug is inserted into this jack. This setting can
be changed so that speaker sound is always on regardless whether a plug is inserted or not (page 58).
External Audio Equipment

CAUTION
• Do not use the instrument/device or headphones for a long
period of time at a high or uncomfortable volume level, since
this can cause permanent hearing loss. If you experience any
hearing loss or ringing in the ears, consult a physician.

NOTICE
• When the instrument’s sound is output to an external
device, first turn on the power to the instrument, then to
the external device. Reverse this order when you turn the
power off. If the instrument’s power is automatically turned
off via the Auto Power Off function (page 19), first turn off
the external device, then turn on the power to the instrument then the external device again.

NOTICE

Standard
stereo
phone plug

Audio cable

The PHONES/OUTPUT jack also functions as an
external output. You can connect the PHONES/OUTPUT jack to a keyboard amplifier, stereo system,
mixer, tape recorder, or other line-level audio device
to send the instrument’s output signal to that device.
Optimum setting
Output gain level for this jack is set to a value suitable
for connecting headphones, as the default setting. You
can switch this to the value suitable for connecting an
external audio device. For details on how to switch the
value, see page 58.

DGX-660 Owner’s Manual

• Do not route the output from the PHONES/OUTPUT jack to
the AUX IN jack. If you make this connection, the signal
input at the AUX IN jack is output from the PHONES/OUTPUT jack. These connections could result in a feedback
loop that will make normal performance impossible, and
may even damage both pieces of equipment.
NOTE

• Use audio cables and adaptor cables having no (zero) resistance.

Setting Up

Connecting a Footswitch (SUSTAIN Jack)

The sustain function lets you produce a natural sustain
as you play by pressing a footswitch. Plug the supplied footswitch into this jack and use it to switch sustain on and off.
An FC3A foot pedal or FC4A or FC5 footswitch (sold
separately) can also be connected to this jack. The
FC3A lets you use the Half Pedal function (page 22).

Press the [FUNCTION] button, press the CATEGORY [r] or [f] button repeatedly until “Assignable Pedal” appears, then select the desired setting by
using the dial.
SUSTAIN

• Make sure that power is off when connecting or disconnecting a footswitch or a foot pedal.

PORTAMENTO

• The sustain function does not affect the Split Voice (page 28).

Damper Resonance
This function simulates the sustain sound produced
with the damper pedal on a grand piano. If you want
to use this function, select a voice in the “Target Voice
List” below, then press the footswitch. This function
can be turned off via the FUNCTION display (page
74). For information on how to select a Voice, see
page 27.
Voice Name

001

Natural! Grand Piano

003

Live! Pop Grand Piano

004

Live! Warm Grand Piano

008

Honky Tonk Piano

167

Natural Grand Piano (XG)

169

Live Pop Grand Piano (XG)

170

Live Warm Grand Piano (XG)

173

Honky Tonk Piano (XG)

NOTE

• This function does not affect the Voice 001
“Natural! Grand Piano” and 167 “Natural
Grand Piano (XG)”, which would not
sound appropriately with this function.
• This affects only Main/Dual Voices and the
Harmony sound (pages 27, 28 and 31),
and has no effect on the Split Voices
(page 28).

MIC ON/OFF

Turns the microphone sound on or off (page
71).

START/STOP

Same as the [START/STOP] button (pages
33, 39).

TAP TEMPO

When Style and Song are stopped, tapping
the pedal at the desired tempo—four times for
time signatures in 4 (4/4, etc.), and three
times for time signatures in 3 (3/4, etc.) starts
playback of the rhythm part of the Style or the
Song at the tempo you tapped the pedal. During playback of a Style or Song, you can
change the tempo by tapping the pedal twice
at the desired tempo.

Target Voice List
Voice No.

Allows you to use a pedal to control sustain.
When you press and hold the pedal, all notes
played on the keyboard have a longer sustain.
The portamento effect (a smooth slide
between notes) can be produced while the
pedal is pressed. Portamento is produced
when notes are played legato style (i.e., a
note is played while the preceding note is still
held). The portamento time can also be
adjusted in the Function “Portamento Time”
(page 74).

NOTE

• Do not press the footswitch while turning the power on. Doing
this changes the recognized polarity of the footswitch, resulting in reversed footswitch operation.

Setting Up

Assigning specific functions to the pedal
The function of the footswitch or the foot pedal connected to SUSTAIN jack can be changed from its
default setting (Sustain).

NOTE

• This effect is applied only to a Voice in the “Target Voice List”
selected as the Main Voice or used in Track 1 (page 68) of the
Song.

DGX-660 Owner’s Manual

Setting Up

Connecting a Pedal Unit (PEDAL UNIT jack)
Setting Up

This jack is for connecting an LP-7A/LP-7AWH pedal
unit (sold separately). When connecting the pedal
unit, make sure to also assemble the unit on the supplied keyboard stand.
NOTE

• Make sure that power is off when connecting or disconnecting the pedal unit.
• This affects only Main/Dual Voices and Harmony sound
(pages 27, 28 and 31).
• The functions of the pedals of the pedal unit cannot be
changed.

Half Pedal function
(for FC3A and LP-7A/LP-7AWH)
This function allows you to vary the sustain length
depending on how far the pedal is pressed. The farther
you press the pedal, the more the sound sustains. For
example, if you press the damper pedal and the notes
you play sound a bit murky and loud with too much sustain, you can partially release the pedal to lessen the
sustain (murkiness).

LP-7A/7AWH
(sold separately)

Keyboard
Stand

Pedal Unit functions
Damper Pedal (Right)
Pressing this pedal will sustain notes longer. Releasing this
pedal immediately stops (damps) any sustained notes. This
pedal lets you use the Damper Resonance (page 21) and Half
Pedal (see above) functions. When using both a footswitch
and pedal unit, the last effect applied takes priority.

Sostenuto Pedal (Center)
If you play a note or notes on the keyboard and press the sostenuto pedal while the note(s) are held, those notes will sustain as long as you hold the pedal (as if the damper pedal had
been pressed) but all subsequently played notes will not be
sustained. This makes it possible to sustain a note or notes, for
example, while other notes are played “staccato.”
Soft Pedal (Left)
The soft pedal reduces the volume and slightly changes the
timbre of notes played while the pedal is pressed. The soft
pedal will not affect notes that are already playing when it is
pressed.

DGX-660 Owner’s Manual

If you press and hold the
damper pedal here, all the
notes shown will be sustained.

If you press and hold the
sostenuto pedal here, only
the notes held at this timing
will be sustained.

MAIN Display

Setting Up

When the power is turned on, the MAIN display automatically appears. This display
shows the basic settings of the instrument, including the current Voice, Style, Song,
Audio and other settings.
To Return to the MAIN Display
You can return to the MAIN display from any other display by pressing the [EXIT] button.

CONTRAST knob
Adjust the CONTRAST knob on the rear panel of the instrument for optimum display legibility.

A-B Repeat

MIC
Appears when MIC is
set to ON (page 69).

Appears when A-B Repeat (page 40) playback is engaged.

Lesson part
Shows the current Lesson part (page 42).

Time Signature

Measure
Number

Display Title
Tempo

Appears when the corresponding function
is turned on.
Page 54

Transpose

Page 31

Voice
Style

Indicates the current Voices (Main, Dual
and Split) (pages 27, 28).

Indicates the current Style (page
32).

Song or Audio
Indicates the current Song or Audio file.

Chord indication

Smart Chord setting (page 35)
M.D.B.
Style Status

Registration Memory Status

Indicates the current M.D.B. (page 33).

Song Track Status
Appears when Auto
Accompaniment (ACMP)
is on.

Shows the selected
bank number.

Appears when the Synchro Stop function is
engaged.

Shows the memory
numbers that contain
data. A border appears
around the selected
number.

Shows section name

Indicates the track status of the current Song (pages
40 and 46).

Highlighted when ready
for recording.
Specified as Song
recording target.

Contains data and is
muted.
Contains no data.

Contains data and can
be played back.

DGX-660 Owner’s Manual

Basic Controls
Before operating the instrument, it may be helpful to familiarize yourself with the basic
controls below that are used to select items and change values.

Setting Up

 Dial
Rotate the dial clockwise to increase the value, or
counterclockwise to decrease the value.
Decrease

Increase

 CATEGORY buttons
Use these buttons to jump to the first Voice, Style, or
Song in the next or previous Category, and call up the
next or previous Function sequentially.

Example: VOICE SELECT (MAIN) display
Current category

 Number buttons
Use the Number buttons to directly enter a number or
parameter value.
For numbers that start with one or two zeroes (such as
“003”), the first zeroes can be omitted. However, completely entering [0][0][3] will display “003”
quicker than pressing only [3].
Example: Selecting Voice 003

Previous category

Press number
buttons [0], [0],
[3].

 [-] and [+] buttons
Press the [+] button briefly to increase the value by 1,
or press the [-] button briefly to decrease the value by
1. Press and hold either button to continuously
increase or decrease the value in the corresponding
direction. To restore the value to the default setting,
press both buttons simultaneously.

Press briefly
to decrease.

DGX-660 Owner’s Manual

Press briefly
to increase.

Next category

In most procedures described throughout this owner’s
manual the dial is recommended for selection simply
because it is the easiest and most intuitive selection
method. Please note however, that most items or values
that can be selected using the dial can also be selected
using the [+] and [-] buttons.

Enjoying Piano Performance (Piano Room)
Basic Guide

The Piano Room function is for those who want to simply, conveniently, and fully enjoy
playing the instrument as a piano. No matter what settings you’ve made from the panel,
you can instantly call up the optimum settings for piano performance with a single button press. You can also change the piano settings as you desire, or record your performance in the Piano Room as an audio file.

Press the [PIANO ROOM] button to call
up the Piano Room display.

MAIN display
Button

Function

Description

[1]

For selecting the environment
(Reverb Type).
• CONCERT (Concert Hall)
ENVIRONMENT*
• RECITAL (Recital Hall)
• STAGE
• ROOM
• OFF

[2]

PIANO*

For selecting the desired Piano
type.
• GRAND (Grand Piano)
• POP (Pop Grand)
• WARM (Warm Grand)
• H. TONK (Honky Tonk)

[3]

LID POS.*
(Lid Position)

Determines how much the Lid is
opened. This cannot be set when
“Honky Tonk” is selected.

[4]

DETAIL

For calling up the detailed setting
display.

Basic Guide

Playing a Piano Performance in
the Piano Room

Detail setting display
Button

This operation calls up the panel settings for piano
performance. All other functions except for the
relevant buttons ([BANK], REGIST MEMORY
[1]–[4], CATEGORY [r]/[f], [EXIT], [EXECUTE], [+] (YES), [-] (NO), [METRONOME
ON/OFF], [TEMPO/TAP] buttons), the dial, the
pedal, the PITCH BEND wheel and master volume setting are disabled.

Use the [BANK] and REGIST MEMORY
[1]–[4] buttons to set the desired piano
settings.
To call up the DETAIL display, press the REGIST
MEMORY [4] button.
You can change the display by pressing the REGIST MEMORY [4] button repeatedly. (MAIN 
DETAIL  RECORD  MAIN)
NOTE

• You can change the settings also by using the dial, CATEGORY [r]/[f], [+] (YES)/[-] (NO) buttons.

Function

Description

[BANK] TOUCH*

For selecting the Touch Response
sensitivity (page 57).
• SOFT
• MEDIUM
• HARD

[1]

TUNE*

Determines the pitch of this instrument in 1Hz steps.
Setting range: 416Hz–466Hz

[2]

D. RESO.*
(Damper Resonance)

Determines whether Damper Resonance is applied (ON) or not (OFF).

[3]

RESET

Restores all settings of Piano Room
to the default. After a message
appears, press the [+] (YES) button
to restore all settings.

[4]

RECORD

For calling up the recording display
(page 26).

* The settings marked with * (asterisk) will be maintained even if
you exit from this display or turn off the power. Pressing the
[PIANO ROOM] button next time will call up the previously
entered Piano settings.

Play the keyboard.
NOTE

• You can turn the Metronome on or off by pressing the
[METRONOME ON/OFF] button. For information on setting the Metronome tempo and time signature, refer to
page 29.

Press the [EXIT] button to exit the Piano
Room display.
DGX-660 Owner’s Manual

Enjoying Piano Performance (Piano Room)

NOTE

Recording your Performance
as Audio in the Piano Room
You can record your performance in the Piano Room
to a USB flash drive as an audio file.

Connect the USB flash drive to the USB
TO DEVICE terminal.
Before using a USB flash drive, be sure to read
“Precautions when using the USB TO DEVICE
terminal” on page 80.

• A moving series of dots (…) appear in the display when
recording setup takes a long time. If this happens, wait to
play the keyboard until the dots are gone and the  STOP
button in the display flashes.

After you finish the performance, press
the REGIST MEMORY [1] button to stop
recording.
The Audio file will automatically be saved as
“UserAudioxxx” (xxx is 001–100) to the USB
flash drive. The file name is shown on the display.
File name

NOTICE

Basic Guide

• Never attempt to disconnect the USB flash drive or
turn the power off during recording. Doing so may corrupt the USB flash drive data or the recording data.

Press the [PIANO ROOM] button to call
up the Piano Room display.
Make settings as desired, such as Piano type, environment, lid position and so on.

Press the REGIST MEMORY [4] button
once or twice to call up the “RECORD”
display.

NOTE

• After recording is stopped, a moving series of dots (…)
appear, indicating that saving is in progress.
NOTE

• You can change the display by pressing the REGIST
MEMORY [4] button repeatedly. (MAIN  DETAIL 
RECORD  MAIN)

Press the REGIST MEMORY [1] button to
start recording, then play the keyboard.
“RECORD” display

To hear the recorded performance,
press the REGIST MEMORY [2] button.
Press the REGIST MEMORY [2] button again to
stop the playback.

Press the [EXIT] button to exit the Piano
Room display.

Playing back audio files recorded in the
Piano Room
In the Piano Room, you can play back only the latest
recorded audio file; other audio files recorded in the
Piano Room can only be played back after exiting
from the Piano Room. For information on playing
back the Audio files, refer to “Playing Back a Song or
Audio File” on page 39.

DGX-660 Owner’s Manual

Try Playing a Variety of Instrument Voices
In addition to the wonderfully realistic piano sounds, you can select and play other
musical instrument Voices, such as organ, guitar, bass, strings, sax, trumpet, drums
and percussion, and even sound effects.

Selecting a Main Voice

Play the keyboard.

This procedure selects the Main Voice for playing on
the keyboard.

Press the [VOICE] button to call up the
Main Voice selection display.
The current Voice number and name will be highlighted.

Preset Voice Types
001–151
167–554

Instrument Voices

152–166
(Drum Kit)

Various drum and percussion sounds are
assigned to individual keys. Details on assigning instruments to keys are provided in the
Drum Kit List of the separate Data List.

000

One Touch Setting (OTS)
The One Touch Setting feature automatically
selects the most suitable Voice for you when
you select a Style or Song. Simply select
Voice number “000” to activate this feature.

Basic Guide

Playing the “Grand Piano”
(Piano Reset)
Current Voice number and name

When you want to reset various settings to default and
simply play a Piano sound, hold down the [PIANO
ROOM] button for longer than a second.

Use the dial to select the desired Voice.
The Voice List is provided on the front panel, or in
the separate Data List.
Hold for longer
than a second.

Select 023 Cool! Organ

After a confirmation message appears on the display,
press the [+] (YES) button to call up the default piano
settings.
The Voice number is set to 001 “Natural! Grand
Piano” and all other settings are turned off automatically, so only the Grand Piano Voice will play over the
entire keyboard.
NOTE

• Keep in mind that this Piano Reset function is different from
the Piano Room feature (page 25), even though the button is
the same.
• This function cannot be used while the Piano Room display
(pages 25, 26) is shown.

DGX-660 Owner’s Manual

Try Playing a Variety of Instrument Voices

Layering Two Voices—Dual
Voice
In addition to the Main Voice, you can layer a different Voice over the entire keyboard as a “Dual Voice.”

Press the [DUAL ON/OFF] button to turn
Dual on.

Playing a Split Voice in the Left
Hand area
By dividing the keyboard into two separate areas, you
can play one Voice with your right hand and a different Voice with your left.

Press the [SPLIT ON/OFF] button to turn
on Split.
The keyboard is divided into the left hand and
right hand areas.

Basic Guide

Split point

Two voices will sound
at the same time.

You can confirm whether the Dual function is on
in the MAIN display.
Split Voice

Main Voice and Dual Voice

You can play a “Split Voice” on the left hand area
of the keyboard while playing a Main Voice and
Dual Voice on the right hand area of the keyboard.
The highest key for the left hand area is referred to
as the “Split Point” which can be changed from
the default F#2 key. For details, refer to page 64.
You can confirm whether the Split function is on
in the MAIN display.

Dual Voice number and name appear when Dual is on.

Press the [DUAL ON/OFF] button again
to exit from Dual.
Although turning on Dual will select a Dual Voice
suitable for the current Main Voice, you can easily
select a different Dual Voice (page 60).

Split Voice number and name appear when Split is on.

DGX-660 Owner’s Manual

Press the [SPLIT ON/OFF] button again
to exit from Split.
You can easily select a different Split Voice (page
60).

Try Playing a Variety of Instrument Voices

Setting the Time Signature

The instrument features a built-in metronome (a
device that keeps an accurate tempo), convenient for
practicing.

Press the [METRONOME ON/OFF] button to start the metronome.

Here, we’ll set a time signature of 3/4 as an example.
NOTE

• The setting of the time signature cannot be changed in the
Piano Room. Set it before calling up the Piano Room display.

Current setting

Hold for longer
than a second.

Indicates the beat number in the measure.

Hold down the [METRONOME ON/OFF]
button for longer than a second to call
up “Time Signature - Numerator.”
The time signature is shown on the display.

Numerator
(Number of beats
per measure)

Press the [METRONOME ON/OFF] button again to stop the metronome.

Adjusting the Metronome Tempo

Denominator
(The length of
one beat)

NOTE

• The metronome time signature will synchronize to a Style
or Song that is selected, so these parameters cannot be
changed while a Style or Song is playing.

Press the [TEMPO/TAP] button to call up the Tempo
value, then use the dial to adjust the Tempo value.

Tempo

Basic Guide

Using the Metronome

Rotate the dial to select “3.”
A bell will sound on the first beat of each measure
while the other beats will click.

Press the CATEGORY [f] button to call
up “Time Signature - Denominator.”

Press the [EXIT] button to exit the TEMPO display.

DGX-660 Owner’s Manual

Try Playing a Variety of Instrument Voices

Rotate the dial to select “4.”

Setting the Bell sound
This allows you to select whether the click sound has
a bell accent, or plays only a click sound.

Confirm the setting by playing the Metronome.

Basic Guide

Press the [FUNCTION] button.

Use the CATEGORY [r] or [f] button
repeatedly to select “Bell.”

Rotate the dial to turn the bell sound on
or off.

Setting the Metronome Volume

Press the [FUNCTION] button to call up
the FUNCTION display.

Press the CATEGORY [r] or [f] buttons repeatedly to select “Metronome
Volume.”

Metronome volume

Rotate the dial to set the Metronome Volume.

DGX-660 Owner’s Manual

Try Playing a Variety of Instrument Voices

Adding Harmony

How to sound each Harmony Type

You can add harmony notes to the Main Voice.

Harmony type 01 to 10, 13

Press the [HARMONY ON/OFF] button to
turn Harmony on.
Press the right-hand keys while playing chords in the
auto accompaniment range of the keyboard when the
Auto Accompaniment is on (page 32).

Harmony type 11 (1+5) and 12 (Octave)

Play the keys.

Appears when Harmony is turned on.

Although turning on the Harmony will select a
Harmony Type suitable for the current Main
Voice, you can select a different Harmony Type.

Basic Guide

Harmony type 14 (Multi Assign)

Both of the Main and Dual Voices should be turned on
when using the Multi Assign effect. The Main and
Dual Voices are alternately assigned to the notes in
the order you play them.

Harmony type 15 to 18 (Echo)

Play the keys.

Hold down the [HARMONY ON/OFF] button for longer than a second until “Harmony Type” appears on the display.

Harmony type 19 to 22 (Tremolo)

Keep holding down the keys.

Harmony type 23 to 26 (Trill)
Hold for longer
than a second.
Hold down two keys.

You can adjust the Harmony Volume in the Function
Settings (page 74).

Current Harmony Type

Rotate the dial to select the desired Harmony Type.
For details, refer to the separate Data List.
The effect and operation differs depending on the
Harmony Type. Refer to the section below.

DGX-660 Owner’s Manual

Playing Styles
The instrument features a variety of accompaniment and rhythmic backing patterns
(called “Styles”) in a variety of different musical genres including pop, jazz, and many
others. Each Style features Auto Accompaniment, letting you produce automatic
accompaniment playback simply by playing “chords” with your left hand. This lets you
automatically recreate the sound of a full band or orchestra — even if you’re playing by
yourself.

Press the [STYLE] button to call up the
STYLE selection display.
The current Style number and name is highlighted.

Press the [ACMP ON/OFF] button to turn
on the Auto Accompaniment.

Basic Guide

When this is on, the functions printed
below the buttons are available.

Currently selected Style

Press the [EXIT] button to return to the
MAIN display, then confirm whether the
Auto Accompaniment is on.

Use the dial to select the desired Style.
The Style List is provided on the front panel, or in
the separate Data List.

ACMP appears when Auto Accompaniment is on.

NOTE

• You can also play the Styles in the instrument’s flash
memory area transferred from a computer (refer to “Computer-related Operations”—page 8) or loaded from a
USB flash drive (page 86), and Styles on a USB flash
drive connected to the instrument. These styles are numbered from 206 upward.

Playing only the Rhythm Part
Pressing the [START/STOP] button starts playback
of only the rhythm part. To stop playback, press the
[START/STOP] button again.
Keep in mind that some Styles, such as “PIANIST”
category Styles, have no rhythm part. These Styles
produce no sound even if you press the [START/
STOP] button. When you want to use any of these
Styles, always execute step 3 and later so that all
accompaniment parts will sound.

DGX-660 Owner’s Manual

When the Auto Accompaniment is on, the keyboard area left to the Split Point (54: F#2)
becomes the “Auto Accompaniment range” and is
used only for specifying the chords.
Split point (F#2)

Auto Accompaniment range

NOTE

• The Split Point can be specified from the FUNCTION display. For details, refer to page 64.

Playing Styles

Press the [SYNC START] button to turn
Synchro Start on.

You can add intro, ending and rhythm variations to
Style playback by using “Sections.” For details,
refer to page 61.

Flashes when Synchro
Start is on.

Using the Music Database

Play a chord in the Auto Accompaniment range to start Style playback.
Play a melody with your right hand and chords
with your left.

Press the [MUSIC DATABASE] button to
call up the Music Database selection
display.

Basic Guide

If you have difficulty finding and selecting the desired
Style and Voice, use this feature. From the Music
Database, simply selecting your favorite music genre
calls up the ideal settings.

Split point

Auto Accompaniment range

Chord indication
Chords being played in the Auto Accompaniment
range will appear.
Music Database name

Both the Auto Accompaniment and Synchro Start
are automatically turned on.

Use the dial to select the desired Music
Database.
This operation calls up the panel settings such as
Voice and Style that are registered to the selected
Music Database. The Music Database List is provided in the separate Data List.

Play the keyboard as described in Steps
6 to 7 in this page.

For information about chords, refer to “Chords”
(page 34) or use the Chord Dictionary function
(page 65).
You can adjust the volume of the Style playback.
For details, see page 63.

Press the [START/STOP] button to stop
playback.

DGX-660 Owner’s Manual

Playing Styles

Chords
For users who are unfamiliar with chords, this chart shows the notes of common chords. Since there are
many useful chords and many different ways to use them musically, refer to commercially available
chord books for further details.
 indicates the root note.

Major

Minor

Seventh

Minor Seventh

Major Seventh

Basic Guide

Cm7

CM 7

Dm7

DM 7

Em7

EM7

C
F

Fm7

FM7

Gm7

GM7

Am7

AM 7

Bm 7

BM 7

• A wide variety of chord types can be recognized as well as the above chord types.
• Depending on the chord type, inversions can be used as well as in “root” position.
• Some chord types may not be recognized if some notes are omitted.

Easy Chords
This method lets you easily play chords in the accompaniment range of the keyboard using only one, two, or three fingers.
For a root of “C”

To play a major chord
Press the root note () of
the chord.

To play a minor chord
Press the root note together
with the nearest black key to
the left of it.

To play a seventh chord
Press the root note together
with the nearest white key to
the left of it.

Changing the Chord Fingering type
There are three different Chord Fingering Types. For details, refer to page 64.

DGX-660 Owner’s Manual

Cm 7

To play a minor seventh chord
Press the root note together with
the nearest white and black keys to
the left of it (three keys altogether).

Playing Styles

Using the Smart Chord feature
If you want to fully enjoy playing in various Styles but don’t know how to play the appropriate chords, Smart
Chord is very useful. This function lets you control Styles with just a single finger as long as you know the key of
your playing music, even if you don’t know any chord fingering such as major, minor, diminished and so on.
Appropriate chords suited for the music genre will sound whenever you press a single note, as if you were playing
the “right” chords.

Chord Types
F#dim

Select the Style which you want to play
with, as described in steps 1–2 on page
32.

Press the [EXIT] button to return to the
MAIN display.

Press the [SMART CHORD] button to
turn on the Smart Chord function.

On the KEY SIGNATURE page, use the
dial to select the Key Signature.
Make sure to select the Key Signature which is
same as that on your music score, or your desired
key for playing. Check the Key Signature indication at the right bottom corner of the display.

Basic Guide

Key Signature (Key in F major)

Indicates the selected Key Signature.
Set this to the same as your music
score.
Indicates the current Smart Chord
settings, KEY and TYPE when the
Smart Chord is on.

NOTE

• Smart Chord can be turned on after pressing the [STYLE]
button.

Hold down the [SMART CHORD] button
until the SMART CHORD setting display
appears.

Since the number of flats or sharps is shown to the
right of Key Signature in the display, you can also
find the desired Key Signature by counting the
number of flats or sharps.

Hold for longer
than a second.

DGX-660 Owner’s Manual

Playing Styles

TYPE Page:
This page provides five Types of music genres
which determine the specific chord assignment for
each scale note in the Auto Accompaniment
range. Although selecting a Style in step 1 will
automatically set the optimum Type, you can
select a different Type here for more appropriate
results, if necessary. To do so, from the SMART
CHORD display press the CATEGORY [f] button to select the TYPE page then use the dial to
select a Type.
The actual chord assignments are provided in the
Smart Chord Chart in the separate Data List.

According to the music score or the
chord progression of your performance,
play only the root key with the left hand.
Pressing a key will start playback of the Style. You
can try the chord progression F - F# - G - C - F - C
in order referring to the score on page 35.
Split point

Auto Accompaniment range

Basic Guide

A sample score for the Smart Chord function is
provided in the separate Data List.
Keyboard Voice No.001 Natural! Grand Piano
Style
No.184 Learning 4-4
Key Signature
F Major (b* 1)
Type
Standard

&b c

œ œ
J

œ.

C7
5

& b œ.

F
9

œ.

œ œ
J

F
13

NOTE

DGX-660 Owner’s Manual

œ
J œ

œ.

˙˙
b

œ œ
J

j
œ œ

œ.

F dim7

C 7/G

œ.

j
œ œ

˙.

w
F

˙˙

˙˙ ..

˙˙

G m7

˙.

F dim7

˙˙

œ.

˙.

j
œ œ

œ.

#
C dim7

& b ww

• The root of a chord shown at the bottom left of the display
during Song recording may be different when the
recorded Song is played back.

Press the [SYNC START] button to turn
Synchro Start on.

• Each music type assumes only typical or conventional
chord progression for the Style.

œ.

b
B

Indicates the chord you play

Press the [SMART CHORD] button to
turn off the Smart Chord function.

Playing Styles

Calling up Optimum Styles for
Your Performance
(Style Recommender)

Example 2: Play the following rhythm in
the special Drum section of the keyboard.
Snare

This convenient function “recommends” optimum
Styles for your performance, based on the rhythm you
play for one or two measures.

8-beat Styles or those of a similar feel may be
listed on the display.

Hold down the [STYLE] button for longer
than a second to call up the STYLE RECOMMENDER display.
The keyboard is divided by the B0 key into two
sections (Drum and Piano) as shown below.

The timing at which you play the keys is analyzed over several seconds, then playback of
the most recommended Style starts. In addition, the candidates of the other recommended Styles are listed in the display.

Basic Guide

Kick

Hold for longer
than a second.
B0

The Drum instruments (Kick, Snare and Hi-Hat)
are assigned to the left-side section while the
Piano sound is assigned to the right.

Search for the desired Style.
2-1 Press the [START/STOP] button to start
the metronome.
A “WAITING” indication appears in the display. As necessary, use the [+]/[-] buttons to
select the beat, and use the [TEMPO/TAP]
button to adjust the tempo (page 63).

NOTE

• Only the note-on timing is analyzed. Tempo, pitches and
note length are ignored.
• The recommended Style plays back according to the last
chord played in the PIANO section. The PIANO section
detects chords using the Fingering Chord type “FullKeyboard” (page 64).

Listen to the highest recommended
Style, while playing chords in the PIANO
section (as shown in step 1).
You can try out other Styles listed on the display
by using the dial. If you cannot find the desired
Style in the list, press the [STYLE] button, then
return to step 2-2.

When you’ve found a Style you’re satisfied with, press the [EXIT] button to exit
from the Style Recommender display.

Play the keyboard along with the Style
you just found.

2-2 While “WAITING” is shown, play the
rhythm you have in mind on the Drum or
Piano section for one or two measures
along with the metronome.
Below are two possible examples.
Example 1: Play the following rhythm in
the Piano section of the keyboard.

Bossa Nova Styles or those of a similar feel
may be listed on the display.

DGX-660 Owner’s Manual

Playing Songs and Audio Files
There are two kinds of data that can be recorded and played back on this instrument:
Songs and Audio files. Not only can you play back a Song or Audio file and listen to it,
but you can also play the keyboard along with Song or Audio file playback.

• Songs
The Songs are organized by category as listed below, allowing you to easily select from the desired category. The
numbers 001–100 are Preset Songs, and a complete list is provided in the separate Data List. The numbers 101–
105 are Songs you’ve recorded on this instrument, and numbers from 106 upward are MIDI files in SMF (Standard MIDI File) format in this instrument’s flash memory and a USB flash drive connected to this instrument.
 Gives you an idea of the advanced capabilities of this instrument.
 Demonstrates many useful Voices of this instrument.
 These are piano solo pieces.
 These are piano ensemble pieces.
 When you need to practice backing (accompaniment) patterns, these
songs are ideal for that purpose.

Basic Guide

 Includes famous classical music pieces.
 Includes traditional songs from around the world.
 Songs you’ve recorded on this instrument (page 44).
 Songs (MIDI files) in the instrument’s flash memory area transferred
from a computer (refer to “Computer-related Operations”—page 8) or
loaded from a USB flash drive (page 86), and Songs (MIDI files) on a
USB flash drive connected to the instrument.
NOTE

• Score data for the Preset Songs (exceptions are the Over View Demo Song and Songs 1–11) are provided in the Songbook,
which is available as a free download from the website (page 8).

• Audio files
Commercially available Audio files in WAV format (file extension: .wav with 44.1 kHz sample rate, 16 bit resolution, stereo) and your own recorded Audio files on a USB flash drive can be played back (page 49).
Availability of functions differs between Songs and Audio files. In this manual, the following icons indicate
whether or not the explanation applies to Songs or Audio files individually.
Example:
… Indicates explanation applies only to Songs.
AUDIO
SONG

Listening to the Overview Demo
This is a special demo for sound demonstrations and
features. Press the [DEMO/BGM] button to start playback of the Overview Demo continuously, calling up
the various displays in sequence.

DGX-660 Owner’s Manual

To stop playback, press the [DEMO/BGM] button or
[START/STOP] button.
Please note that any Song-related functions with
“ SONG ” cannot be applied to Overview Demo.
NOTE

• With the default setting, only one Demo is played back and
repeated when the [DEMO/BGM] button is pressed. This setting can be changed so that all Preset Songs are played, or all
Songs and Audio files on a USB flash drive are played. Five
playback group settings are provided. Simply select the one
that suits your needs (page 66).

Playing Songs and Audio Files

Playing Back a Song or Audio
File

SONG SELECT display

AUDIO

SONG

Before using a USB flash drive, be sure to read “Precautions when using the USB TO DEVICE terminal”
on page 80.

If you want to play back a Song or Audio
file on a USB flash drive, connect a USB
flash drive to the USB TO DEVICE terminal.
Audio files must be on a USB flash drive.

AUDIO SELECT display

Basic Guide

Important
• In order to play a file on a USB flash drive, the file must
be stored either in the USB flash drive’s root directory
or a first-level/ second-level folder in the root directory.
Files stored in third-level-folders created inside a second-level folder cannot be selected and played by this
instrument.

USB flash drive (Root)

File

Can be selected/
played
File

File

Use the dial to select the desired Song
or Audio file.
When selecting Songs, refer to the list on page 38.

Press the [START/STOP] button to start
playback.
To stop playback, press the [START/STOP] button
again.

Cannot be selected/
played

Press the [SONG/AUDIO] button once or
twice to call up the SONG SELECT display for Song selecting, or AUDIO
SELECT display for Audio selecting.
The available Songs or Audio files are listed on
the display.
If a USB flash drive is connected, pressing the
[SONG/AUDIO] button repeatedly toggles
between two displays: SONG SELECT and
AUDIO SELECT. If a USB flash drive is not connected, this operation calls up only SONG
SELECT display.

When this is on, the functions printed
above the buttons are available.

You can adjust the Song volume (page 67) and
Audio volume (page 67).

Adjusting the Tempo of a Song
Same procedure as with Style tempo. See page 63.
NOTE

• The tempo of audio playback cannot be changed.

DGX-660 Owner’s Manual

Playing Songs and Audio Files

Fast Forward, Rewind, and
Pause

When playback reaches to the point you
want to specify as the end point, press
the [A-B REPEAT] button again to set
the B point.
The specified A-B section of the Song will now
play repeatedly.

To cancel repeat playback, press the [AB REPEAT] button.
To stop playback, press the [START/STOP] button.

AUDIO

SONG

This instrument lets you fast forward [FF], rewind
[REW] and pause [PAUSE] playback of the Song or
Audio file.
When this is on, the functions printed
above the buttons are available.

NOTE

• If you want to set the start point “A” at the top of the Song,
press the [A-B REPEAT] button before starting playback.

Basic Guide

Pressing the [REW] or [FF] button once moves one
measure backward/forward for Songs, or one second
for Audio files. Holding one of them scrolls backward/forward continuously.
Press the [PAUSE] button to pause playback, and
press again to start from that point.

A-B Repeat

Turning Each Track On/Off
SONG

AUDIO

Each “track” of a Song plays a different part—melody, percussion, accompaniment, etc. Each of the
tracks can be muted so that you can play the muted
part yourself.
Pressing the desired Track button repeatedly will toggle the on/off status.

AUDIO

SONG

You can specify a desired section of a Song and
repeatedly play back that section by setting the A
point (start point) and B point (end point).
A

Track will play back.

B
Track contains no data.

Start playback of the Song (page 39).

When playback reaches to the point you
want to specify as the start point, press
the [A-B REPEAT] button to set the A
point.

DGX-660 Owner’s Manual

Track is muted.
NOTE

• Up to two Track buttons can be pressed simultaneously for
turning on or off.

Playing Songs and Audio Files

SONG

Displaying the Lyrics

AUDIO

SONG

AUDIO

You can view the music notation (score) of the
selected Song.

When the selected Song contains lyric data, you can
view it on the instrument’s display during playback.

Select a Song (steps 1–3 on page 39).

Press the [SCORE] button to call up the
Score display.
Pressing this button each time alternates the displayed notation style between single-staff and
double-staff.

Select Song 38 (steps 1–3 on page 39),
which is the only internal Song that provides lyric display.

Press the [LYRICS] button to call up the
Lyrics display.
The title, lyricist, and composer of the Song will
appear on the display.

Press the [START/STOP] button.
The Song will play back while the lyrics and
chords are shown on the display. The lyrics will be
highlighted to show the current location in the
Song.

Chord

Marker

Basic Guide

Displaying the Song Score

Lyrics

Both chords and lyrics will be shown in singlestaff score display of a Song that includes chords
and lyric data.

Press the [START/STOP] button to start
Song playback.
The marker moves to indicate the current position.
If the Song parts are muted at this point you will
be able to hear only the sound of your own performance so that you can play the Song yourself
while reading the score. Refer to page 40 for more
information on Song muting.

NOTE

• Commercially available Song files, including XF format
files (page 10), are compatible with the Lyrics display features as long as they are standard MIDI file format files
containing lyric data. Lyrics display may not be possible
with some files.

NOTE

• When there are many lyrics, they may be displayed in two
rows a measure, and/or some lyrics or chords may be
abbreviated.
• Small notes that are hard to read may be easier to read
after you use the Quantize function (page 75).
• No chords or lyrics are shown on the double-staff display.

Press the [EXIT] button to return to the
MAIN display.

DGX-660 Owner’s Manual

Using the Song Lesson Feature
You can use the selected Song for a left-hand, right-hand, or both-hands lesson. Try
practicing with these three Song Lesson types.

Three Types of Song Lesson
Lesson 1—Waiting

Practicing with Song Lesson
1

In this Lesson, try playing the correct notes shown on
the display. The Song pauses until you play the right
note.

Select the desired Song for your lesson
(page 39).
NOTE

• Audio files cannot be used with the Lesson features.
NOTE

• The Song Lesson features can be applied also to User
Songs and Songs (SMF format 0 and 1) on a USB flash
drive or transferred/loaded to the instrument (pages 84
and 86).

Basic Guide

Press the [EXIT] button to return to the
MAIN display.

Select the part you want to practice.
Press the [R/1] button for a right-hand lesson, [L/
2] button for a left-hand lesson, or press both the
[R/1] and [L/2] buttons simultaneously for a bothhands lesson. The currently selected part is shown
in the upper right corner of the display.

Lesson 2—Your Tempo
In this Lesson, try playing the correct notes shown on
the display with the correct timing. The Song playback tempo will change to match the speed at which
you are playing at.

Lesson 3—Minus One
Here’s where you can perfect your technique. The
Song will play at the normal tempo, minus the part
you have chosen to play. Play along while listening to
the Song.

DGX-660 Owner’s Manual

: Right-hand lesson
: Left-hand lesson
: Both-hands lesson

Using the Song Lesson Feature

Press the desired LESSON START button, [WAITING], [YOUR TEMPO] or
[MINUS ONE] to start playback of the
Song Lesson.
Play the notes shown in the on-screen score. The
score marker and keyboard marker in the display
will indicate the notes to play.

When Lesson playback reaches the end,
check your evaluation Grade on the display.
Your performance will be evaluated in four levels:
OK, Good, Very Good, or Excellent. After the
evaluation display has appeared, the lesson will
start again from the beginning.

NOTE

Basic Guide

• The evaluation feature can be turned off via the FUNCTION “Grade” item (page 75).

 Marker

Making Practice Perfect—
Repeat & Learn
 Marker
Over indicator
NOTE

• The notes in the on-screen score may be shown an
octave higher or lower (or more) depending on the Voice
used in the Song.
• Since the display has restrictions, the on-screen score
may appear somewhat different from commercially available scores. When using the Lesson function, also make
sure to refer to the notes shown in the on-screen keyboard at the bottom of the display. You can adjust the
score appearance on the Lesson display by changing the
Quantize parameter in the Score category in the Function
List (page 75).

Shifting the on-screen keyboard left or right.
If the Over indicator appears, the hidden (
) areas
of the keyboard can be brought into view by pressing
the [+] or [-] button. Notes that actually fall outside the
keyboard’s range cannot be used in the lesson.
The displayed range (61 keys)

If you want to practice a specific section in which you
made a mistake or you have difficulty with use the
Repeat & Learn function.

Press the [REPEAT & LEARN] button during Lesson playback.

The Song location will move back four measures, a
one-measure count will play, then Song playback will
start again. Playback of the four measures will repeat
with a one-measure count-in.
To exit from this status, press this button again.
NOTE

• You can change the amount of measures the Repeat & Learn
function jumps back by pressing a number button [1] to [9]
during repeat playback.

Actual keyboard range (88 keys)

To stop Lesson playback, press the [START/
STOP] button. Even during playback, you can
change the Lesson number by pressing the
[WAITING], [YOUR TEMPO] or [MINUS ONE]
button.
DGX-660 Owner’s Manual

Recording Your Performance
This instrument allows you to record your performance in the following two methods.

• Song recording (MIDI recording)
With this method, recorded performances are saved to the instrument as a User Song, in SMF (format 0) MIDI
file. If you want to re-record a specific section or edit parameters such as Voice, use this method. Also if you want
to record your performance to each track one by one, execute “Recording to a Specified Track” of the Song
recording method. Since a User Song can be converted to an Audio file after recording (page 85), you may want to
use Song recording (with individual track recording) to first create a complex arrangement you would not otherwise be able to play live, then convert it to an Audio file. Up to approximately 30,000 notes can be recorded for
one User Song.

• Audio recording (page 49)

Basic Guide

With this method, recorded performances are saved to a USB flash drive as an Audio file. Recording is done without designating the recorded part. Since it is saved in stereo WAV format of normal CD quality resolution
(44.1kHz/16bit) by default, it can be transmitted to and played on portable music players by using a computer.
This instrument allows you to record up to 80 minutes per single recording.

Song Recording
SONG

If you want to record with a Style, press
the [STYLE] button then the [ACMP ON/
OFF] button to turn ACMP on.
Once you have set the ACMP to ON, don’t call up
the SONG SELECT or AUDIO SELECT display
because doing so will set the ACMP to OFF.

Press the [REC] button to enable recording.
If a User Song was not selected beforehand, this
operation selects the lowest-numbered unrecorded
User Song (from 101–105) as the Recording target.

AUDIO

You can record up to five of your performances and
save them as User Song 101 through 105. This operation is for recording a new Song from scratch. If you
want to re-record a specific track, execute “Recording
to a Specified Track” on page 46.
NOTE

• Split Voice, Metronome, the AUX IN sound and MIC INPUT
sound cannot be recorded.

Press the [SONG/AUDIO] button once or
twice to call up the SONG SELECT display for Song recording.

Track 1 (and A) is automatically
selected for recording.

If a USB flash drive is connected, pressing the
[SONG/AUDIO] button repeatedly toggles
between two displays: SONG SELECT and
AUDIO SELECT. If a USB flash drive is not connected, this operation calls up only SONG
SELECT display.
You can select the desired User Song with the dial.

DGX-660 Owner’s Manual

To cancel recording, press the [REC] button or
[EXIT] button.
NOTICE
• If all User Songs (Song numbers 101–105) contain
recorded data, Song 101 will automatically be
selected. In this case, you will record over and erase
any previous data of this Song.

Recording Your Performance

NOTE

• You can use the Metronome while recording although the metronome sound will not be recorded. After pressing the [REC]
button, set the Time Signature and start Metronome before
going on to step 4.

Press the [+] (YES) button to save the
Song.
The Song will be stored as a MIDI file to Song
number 101–105. To cancel saving, press the [-]
(NO) button at the prompt.

Play the keyboard to start recording.
You can also start recording by pressing the
[START/STOP] button.

NOTICE

Basic Guide

The current measure will be shown on the display
during recording.

• Never attempt to turn the power off when a “Now Writing…” message is shown in the display. Doing so can
damage the flash memory and result in a loss of data.

To hear the newly recorded performance, press the [START/STOP] button.
NOTE

• If you press the [-] (NO) button once in response to the
confirmation message, you have the option of saving the
Song later until the power is turned off or another Song is
selected. To do this hold down the [REC] button until the
save confirmation message appears, then press the [+]
(YES) button.

Current measure

After you finish performance, press the
[START/STOP] button or [REC] button to
stop recording.
When recording is stopped, a message asking if
you want to save the Song will appear.

Data that cannot be recorded to Songs
AUX IN sound, Microphone sound, Metronome
sound, Damper Resonance effect, Split Voice,
Damper Resonance ON/OFF, Master EQ Type,
Output Gain, I.A.Control, I.A.Control Depth,
MDB, Song Volume, Transpose, Tuning, Split
Point
Data that cannot be changed during the
Song recording
Style Number, ACMP ON/OFF, Smart Chord setting, Style Volume, Chord Fingering, Touch
Response, Time Signature

NOTICE
• The recorded Song will be lost if you turn the power off
without executing the save operation.

DGX-660 Owner’s Manual

Recording Your Performance

Recording to a Specified Track
SONG

AUDIO

Basic Guide

With Song Recording, you can create a Song consisting of six tracks (1–5 and A) by recording your performance to each track one by one. In recording a
piano piece, for example, you can record the righthand part to Track 1 then record the left-hand part to
Track 2, allowing you create a complete piece which
may be difficult to play live with both hands together.
To record a performance with Style playback, for
example, record the Style playback to Track A, then
record melodies to Track 1 while listening to the
already recorded Style playback. In this way, you can
create an entire Song which would otherwise be difficult, or even impossible, to play live.

Press and
hold

To record your keyboard performance, specify
from [1] to [5]. (To record the Dual Voice specify
from [1] to [3].)
To record the Style playback, specify [A]. (ACMP
is automatically turned on.)
The selected track will be highlighted in the display.
(When Track 1 is specified)

Track 1 will be
highlighted
Track
1

Track
2

Track
3

Track
4

Track
5

Style
Track

(When Track A is specified)

Tracks [1]–[5] For recording your keyboard performances, such as a piano piece.
Track [A]
For recording Style playback.
NOTE

• Split Voice, Metronome, AUX IN sound and MIC INPUT sound
cannot be recorded.

Before recording, make the necessary settings
such as Voice/Style selection.

Track A will be
highlighted

When Track A is specified, you can specify one
more track from [1]–[5] by repeating this step, and
vice versa.
To cancel recording, press the [REC] button or
[EXIT] button.
NOTICE

If you want to re-record an existing User
Song, select the desired User Song.
(Execute step 1 on page 44 then select
the User Song from 101–105 using the
dial.)
If you want to record from scratch, select the unrecorded User Song.
To specify the target track, while holding
down the [REC] button, press one track
button from [1]–[5] or [A].
To cancel recording to a specified track, press that
track button again.

DGX-660 Owner’s Manual

• If you record to a track that contains previously
recorded data, the previous data will be overwritten
and lost.
NOTE

• If Auto Accompaniment is on and Track [A] has not yet
been recorded, Track [A] will automatically be selected
for recording when one of Tracks ([1]–[5]) is selected. If
you only want to record to Track [1]–[5], be sure to turn
Track [A] off.
• If the User Song selected in step 1 already contains
recorded Style data, the same Style number is automatically set. If you want to select another Style, press the
[STYLE] button then use the dial to select the desired
Style after specifying the [A] track.
NOTE

• You can use the Metronome while recording although the
metronome sound will not be recorded. After pressing the
[REC] button, set the Time Signature and start Metronome before going on to step 3.

Recording Your Performance

Play the keyboard to start Recording.

After you finish the performance, press
the [START/STOP] button or [REC] button to stop recording.
When recording is stopped, a message asking if
you want to save the Song appears.

Record your performance to another
track by repeating steps 2–6.
In step 2, select a track which has no recorded
data. Play the keyboard while listening to the
already recorded data.
You can record to each track [1]–[5] using different Voices. Before specifying the target track,
press the [VOICE] button and select the desired
Voice, then press the [EXIT] button.
NOTE

• When recording another track, you can turn already
recorded tracks on or off using the track buttons.

See page 45 for information on data that cannot be
recorded to the Songs or cannot be changed during
Song recording.

Basic Guide

NOTICE
• The recorded performance will be lost if you turn the
power off without executing the Save operation.

Press the [+] (YES) button to save the
Song.
The Song will be stored as a MIDI file to Song
number 101–105. To cancel saving, press the [-]
(NO) button at the prompt.

The recorded track numbers in the display will be
shown in a box border.

NOTICE
• Never attempt to turn the power off when a “Now Writing…” message is shown in the display. Doing so can
damage the flash memory and result in a loss of data.

To hear the newly recorded performance, press the [START/STOP] button.

DGX-660 Owner’s Manual

Recording Your Performance

Clearing a User Song
SONG

Clearing a Specified Track from
a User Song

AUDIO

SONG

You can clear all tracks of a User Song.

1
2

Press the [SONG/AUDIO] button, and
then select the User Song (101 to 105) to
be cleared.

Basic Guide

While holding down the track [A] button,
press the track [1] button for longer than
a second.
A confirmation message will appear on the display.
To cancel this operation, press the [-] (NO) button.

Hold for longer
than a second.

This lets you clear individual tracks from a User Song.

Press the [SONG/AUDIO] button, and
then select the desired User Song (101
to 105).

From [1] to [5] and [A], press the Track
button to be cleared for longer than a
second.
A confirmation message will appear on the display.
To cancel this operation, press the [-] (NO) button.

Press and
hold

Press the [+] (YES) button to clear the
Song.
A clear-in-progress message will appear briefly on
the display.

DGX-660 Owner’s Manual

AUDIO

Hold for longer
than a second.

Press the [+] (YES) button to clear the
track.
A clear-in-progress message will appear briefly on
the display.

Recording Your Performance

Audio Recording
SONG

Press the [REC] button to be ready for
recording.

AUDIO

Before recording, make the necessary settings such as
Voice/Style selection and the AUX IN and MIC
INPUT connections (if you want to record with the
input sound via AUX IN and MIC INPUT jacks). All
the sound produced via this instrument other than
Metronome can be recorded.

If you want to cancel recording, press the [REC]
button again or [EXIT] button.

NOTICE

Connect the USB flash drive to the USB
TO DEVICE terminal.
Before using a USB flash drive, be sure to read
“Precautions when using the USB TO DEVICE
terminal” on page 80.

Press the [SONG/AUDIO] button once or
twice to call up the AUDIO SELECT display for Audio recording.
If a User Audio file was not selected beforehand,
this operation selects a new Audio file as recording target.

Press the [EXECUTE] button to start
recording, then play the keyboard.

Basic Guide

• Don’t use the file name “_DGX-660_TMP.wav” in the USB
flash drive because the file with the name will be overwritten and erased by newly recording Audio data.

The elapsed recording time is shown
in the MAIN display while recording.

NOTICE
• Never attempt to disconnect the USB flash drive or
turn the power off during recording. Doing so may corrupt the USB flash drive data or the recording data.

After you finish the performance, press
the [EXECUTE] button or [REC] button
to stop recording.
The Audio file will automatically be saved as
“UserAudioxxx” (xxx is 001–100) in a folder
labeled “USER FILES” which will automatically
be created on the USB flash drive.
To delete the User Audio files 001–100, perform
“USB Delete” described on page 87.

To hear the recorded performance,
press the [START/STOP] button.

New Audio file

As necessary, select the Audio file for
recording target.
If multiple Audio files are in the USB flash drive
and the wrong file is selected by mistake, you can
select a different file by using the dial. If you want
to create a new Audio file, select “000 New
Audio.”
NOTICE
• If you record to Audio file that contains previously
recorded data, the previous data will be overwritten
and lost.

DGX-660 Owner’s Manual

Memorizing Your Favorite Panel Settings
This instrument has a Registration Memory feature that lets you memorize your favorite settings for easy recall whenever they’re needed. Up to 32 complete setups can be
saved (eight banks of four setups each).
8 Banks

Memory 1

Memory 2

Memory 3

Memorizing Panel Settings to
the Registration Memory
Basic Guide

Make the desired settings such as those
for Voice and Style.

Press and release the [BANK] button to
call up a Bank number on the display.

Up to 32 presets (eight
banks of four each) can
be memorized.

Memory 4

While holding down the [BANK] button,
press one of the REGIST MEMORY [1] to
[4] buttons to memorize the current
panel settings.
You can check the Registration Memory status in
the MAIN display; Memory numbers that contain
data light up, and a border appears around the
selected one.

Press and
hold

Bank number
Bank number Memory number

Use the dial to select a Bank number.
NOTE

• Data cannot be saved to the Registration Memory during
Song playback.

NOTICE
• If you select a Registration Memory number that
already contains data, the previous data is deleted and
overwritten by the new data.
• Do not turn off the power while memorizing settings to
the Registration Memory, otherwise the data may be
damaged or lost.

DGX-660 Owner’s Manual

Memorizing Your Favorite Panel Settings

Recalling Panel Settings from
the Registration Memory
1

Press and release the [BANK] button to
call up a Bank number on the display.

Settings that are Saved to the Registration
Memory
Style settings*
Style number, Auto Accompaniment on/off, Split Point, Style
settings (Main A/B), Style Volume, Tempo, Chord Fingering,
Smart Chord on/off, Smart Chord Setting
Voice settings
Main Voice setting (Voice number and all settings of the related
Functions)
Dual Voice settings (Dual on/off, Voice number and all
settings of the related Functions)
Split Voice settings (Split on/off, Voice number and all
settings of the related Functions)
Effect settings
Reverb Type, Chorus Type, Panel Sustain on/off, DSP
on/off, DSP Type
Harmony settings
Harmony on/off and all settings of the related Functions

Basic Guide

Bank number

Other settings
Transpose, Pitch Bend Range, Assignable Pedal, Portamento Time

Use the dial to select a Bank number.

Press one of the REGIST MEMORY [1] to
[4] buttons to call up the panel settings
you memorized.

* Style settings are not available for Registration Memory
when using the Song/Audio features.

You can check the Registration Memory status in
the MAIN display (page 23).

DGX-660 Owner’s Manual

Backup Parameters and Initialization
Backup Parameters
The following data will be maintained even if the
power is turned off and can be transferred then saved
to a computer via Musicsoft Downloader as a single
Backup file. For instructions, refer to “Computerrelated Operations” (page 8).

Initialization
This function erases the Backup data described above
and Song/Style data, then restores all the default factory settings. As required, execute one of the following two procedures.

Clearing Backup data
Backup Data

Basic Guide

• Piano Room settings (Refer to page 25 for
details.)
• Registration Memory data (page 50)
• Microphone settings (Refer to page 71 for
details.)
• Function Settings (page 72):
Tuning, Split Point, Touch Sensitivity, Style
Volume, Song Volume, Wireless LAN Volume, Metronome Volume, Grade, Demo
Group, Demo Play mode, Demo Cancel,
Panel Sustain, Master EQ type, Chord Fingering, Auto Power Off setting, Damper
Resonance ON/OFF, Output Gain, I.A.
Control ON/OFF, I.A. Control Depth,
Audio Volume, AUX IN Level, Portamento
Time, Assignable Pedal
• Wireless LAN settings (page 77)
In addition to the Backup data above, all the User
Songs and all the Song and Style files transferred
from a computer or loaded from a USB flash drive
will be maintained even if you turn off the power.

This operation initializes the backup data.
While holding down the highest white key on the keyboard, press the [ ] (Standby/On) switch to turn the
power on. Make sure to hold down the key until the
message appears at the top left of the display.

Clearing files in flash memory area
This operation deletes all User Songs and all the
Songs and Styles that have been transferred from a
computer or loaded from a USB flash drive. While
simultaneously holding the highest white key and the
three highest black keys, press the [ ] (Standby/On)
switch to turn the power on. Make sure to hold down
the keys until the message appears at the top left of the
display.

To initialize Backup data, execute “Clearing Backup
data.”
To initialize data (excluding Backup data) transferred
from a computer or loaded from a USB flash drive,
execute “Clearing files in flash memory area.”

NOTICE
• Keep in mind that this operation also deletes the data you
have purchased. Be sure to save the important data to a
computer via Musicsoft Downloader (MSD) software. For
details, refer to “Computer-related Operations” (page 8).

DGX-660 Owner’s Manual

Reference

Handy Performance Features
Selecting a Reverb Type

Selecting a Chorus Type

The Reverb effect lets you play with a rich concert
hall type ambience. Although selecting a Style or
Song will call up the optimum Reverb type for the
entire sound, you can select a different Reverb type
manually.

The Chorus effect creates a thick sound that is similar
to many of the same Voices being played in unison.
Although selecting a Style or Song will call up the
optimum Chorus type for the entire sound, you can
select a different Chorus type manually.

Press the [FUNCTION] button.

Use the CATEGORY [r] and [f] buttons to call up “Reverb Type.”
The current Reverb type is shown below.

Use the CATEGORY [r] and [f] buttons to call up “Chorus Type.”
The current Chorus type is shown.

Current Chorus type

Current Reverb type
NOTE

• Some Songs and Styles use Reverb Types which cannot
be selected via panel operations. If such a Song or Style
is played back, “- - -” is shown on the display. In such a
case, you can select Reverb type 01 using the [+] or [-]
button.

Rotate the dial to select a Reverb type.
Play the keyboard to check the sound. For information about the available Reverb types, refer to
the Effect Type List in the separate Data List.
Adjusting the Reverb Level
You can adjust the Reverb level applied to the
Main, Dual, and Split Voices individually via the
same operations above. Regarding the item in Step
2, refer to the Function List on page 73.

Reference

NOTE

• Some Songs and Styles use Chorus Types which cannot
be selected via panel operations. If such a Song or Style
is played back, “- - -” is shown on the display. In such a
case, you can select Chorus type 01 using the [+] or [-]
button.

Rotate the dial to select a Chorus type.
Play the keyboard to check the sound. For information about the available Chorus types, refer to
the Effect Type List in the separate Data List.
Adjusting the Chorus Level
You can adjust the Chorus level applied to the
Main, Dual, and Split Voices individually via the
same operations above. Regarding the item in Step
2, refer to the Function List on page 73.

DGX-660 Owner’s Manual

Handy Performance Features

Selecting a DSP Type
DSP is an abbreviation of Digital Signal Processing.
These range from reverb-like ambience effects to distortion and other dynamic processing tools that let you
enhance the sound, or completely transform it. The
DSP effect can be added to the Main and Dual Voices.
Although ON/OFF status and type selection for DSP
depends on a selected Main Voice, you can set these
parameters manually.

Use the dial to turn DSP on.
Press the [EXIT] button to return to the MAIN
display in order to check the DSP on/off status.

Press the [FUNCTION] button.

Appears when DSP is on

NOTE

• The volume of the currently playing Voice changes when
turning DSP on or off. This is not a malfunction. The
amount of change differs depending on the selected
Voice.

Press the [FUNCTION] button.

Use the CATEGORY [r] and [f] buttons to call up “DSP Type.”
The currently selected DSP type will be displayed.

Use the dial to select a DSP type.
For information about the available DSP types,
refer to the Effect Type List in the separate Data
List.

• The DSP type is an overall setting—only one type can be
selected. For this reason, when you play a newly loaded
Song or Style, for example, the currently playing Voices
may not sound as expected. This is normal, since the
Song or Style has its own DSP type which replaces any
selection you’ve made before loading. A similar phenomenon occurs when you use the [FF], [REW] buttons or AB Repeat function during Song playback.

Reference

Use the CATEGORY [r] and [f] buttons to call up “DSP.”
The current setting is displayed.

Adjusting the DSP Level
You can adjust the DSP level applied to the Main
and Dual Voices individually via the FUNCTION
display. Refer to “** DSP Level” in the Function
List (page 73).

DGX-660 Owner’s Manual

Handy Performance Features

Panel Sustain

Pitch Controls—Transpose

This function adds sustain to the keyboard voices. Use
it when you want to add sustain to the voices at all
times, regardless of footswitch operation. The sustain
function does not affect the Split Voice.

The overall pitch of the instrument (except for the
Voices with name “*** Kit”) can be shifted up or
down by a maximum of 1 octave in semitone increments.

Press the [FUNCTION] button.

Use the CATEGORY [r] and [f] buttons to call up “Sustain.”
The current setting is displayed.

Use the CATEGORY [r] and [f] buttons to call up “Transpose.”
The current setting is displayed.

Use the dial to turn panel sustain on or
off.

Use the dial to set the Transpose value
between -12 and +12.

Reference

NOTE

Current Transpose value

• The sustain of some Voices may not be obviously or audibly affected when the panel sustain function is turned on.

DGX-660 Owner’s Manual

Handy Performance Features

Pitch Controls—Tuning
The overall tuning of the instrument (except for the
Voices with name “*** Kit”) can be shifted up or
down between 415.3 Hz and 466.2 Hz in approximately 0.2Hz or 0.3Hz increments. The default value
is 440.0 Hz.

Press the [FUNCTION] button.

Use the CATEGORY [r] or [f] buttons
to call up “Tuning.”
The current setting is displayed.

Pitch Controls—the PITCH
BEND wheel
The PITCH BEND wheel can be used to add smooth
pitch variations to notes you play on the keyboard.
Roll the wheel upward to raise the pitch, or downward
to lower the pitch. You can change the amount of pitch
bend produced by the wheel. Refer to “Pitch Bend
Range” in the Function List (page 73).

NOTE

• The pitch may not be raised to the designated value depending on the selected Voice.
• The effects produced by using the PITCH BEND wheel may
not be applied to the Split Voice when the [ACMP ON/OFF] is
ON.

Current value

Reference

Use the dial to set the Tuning value.

DGX-660 Owner’s Manual

Handy Performance Features

Touch Response Sensitivity
The keyboard of this instrument is equipped with a
Touch Response feature that lets you dynamically and
expressively control the level of the Voices according
to your playing strength.

Press the [FUNCTION] button.

Selecting an EQ Setting for the
Best Sound
Five different master equalizer (EQ) settings are provided to give you the best possible sound. Master
Equalizer is EQ processing that is applied to the overall sound (except Audio) which is finally output from
the Effect block to the speakers or headphones.

Press the [FUNCTION] button.

Press the CATEGORY [r] or [f] button several times until “Master EQ Type”
appears.
The current Master EQ type is displayed.

Use the CATEGORY [r] or [f] button
to select “Touch Response.”
The current Touch Response sensitivity is displayed.

Use the dial to select one of the Touch
Response sensitivity settings (1–4).
When “1 (Soft),” “2 (Medium)” or “3 (Hard)” is
selected, Touch Response is active. When “4”
(Fixed) is selected, all notes will be played at the
same volume no matter how strongly or softly you
play the keys.

Reference

Current Touch Response sensitivity

Current Master EQ type

Use the dial to select the desired Master
EQ type.
1 (Normal)

Flat EQ settings.

2 (Piano)

Optimum for piano solo performance.

1 (Soft)

With a soft touch, the instrument produces a loud sound. The volume level
of tones tends to be consistent.

3 (Soft)

Lowers the high range for a softer
sound.

2 (Medium)

Standard touch response.

4 (Bright)

Lowers the mid range for a brighter
sound.

You must hit the key very hard to generate a loud volume. This allows for
versatile expression, from pianissimo
to fortissimo tones.

5 (Powerful)

Features more powerful sound.

3 (Hard)

4 (Fixed)

No touch response. The volume level
will be the same regardless of how
hard you play the keys.

NOTE

• “5 (Powerful)” produces a more punchy sound but may
produce distortion depending on the Voice and Style,
compared to the other Master EQ types.

NOTE

• The initial default Touch Response Sensitivity value is “2.”

DGX-660 Owner’s Manual

Handy Performance Features

Setting the Output Gain Level

Speaker On/Off Setting

Output gain level for the PHONES/OUTPUT jack can
be switched among three values: one suitable for a
headphone and the other two for a connected external
audio device.

You can set whether the sound of this instrument is
always output from its built-in speaker or not when a
plug is inserted to the PHONES/OUTPUT jack.

Press the [FUNCTION] button.

Press the CATEGORY [r] or [f] button several times until “Output Gain”
appears.

Press the [FUNCTION] button.

Press the CATEGORY [r] or [f] button several times until “Speaker Control” appears.

Current setting
Current setting

3
Reference
58

Use the dial to select the desired setting
(below).

Headphones

Select this when using headphones.
The output gain level is set to an optimum value headphones connection.
When “Headphones” is selected and
external audio equipment is connected to the PHONES/OUTPUT
jack, distortion may be produced.

Line Out

Select this when using external audio
equipment.
The output gain level can be adjusted
by the [MASTER VOLUME] control of
the instrument.

Fixed

Select this when using external audio
equipment.
The output gain level is fixed at the
same level, regardless of the position
of instrument's [MASTER VOLUME]
control.

DGX-660 Owner’s Manual

Use the dial to select the desired setting.
When “NORMAL” is selected the speakers are
automatically shut off when a plug is inserted into
the PHONES/OUTPUT jack. When “ALWAYS
ON” is selected the speaker sound is always on
regardless of whether a plug is inserted or not.

Handy Performance Features

Intelligent Acoustic Control (IAC)
IAC is a function which automatically adjusts and
controls the sound quality according to the overall
volume of the instrument. Even when the volume is
low, it permits both low sounds and high sounds to be
clearly heard. IAC is effective only from the sound
output of the instrument speakers. Although the
default settings of IAC is set to ON, you can turn the
function on or off. In addition, you can set the depth
of IAC.

Press the [FUNCTION] button.

Press the CATEGORY [r] or [f] button several times until “I.A. Control”
appears.

Setting IAC Depth
You can adjust the depth of the IAC effect.

Press the [FUNCTION] button.

Press the CATEGORY [r] or [f] button several times until “I.A. Control
Depth” appears.

Current setting

Use the dial to set the desired value.
The setting range is from -3 to 3. The higher the
value, the deeper the effect.

Reference

Current setting

Use the dial to turn IAC on or off.

DGX-660 Owner’s Manual

Voice Settings
Selecting a Dual Voice

Voice Editing

For each of the Main, Dual and Split Voices, you can
edit the parameters such as volume, octave and depth
of the Reverb and Chorus, allowing you to create new,
custom sounds that best suit your musical needs.

Hold down the [DUAL ON/OFF] button
for longer than a second to call up the
“VOICE SELECT (DUAL)” display.

Press the [FUNCTION] button.

Use the CATEGORY [r] or [f] buttons
to call up the desired item.
Main Voice parameters are indicated as “Main
***,” Dual Voice parameters as “Dual ***,” and
Split Voice parameters as “Split ***.” For information about each parameter, refer to the Function
List on page 73.

Rotate the dial to set the value.
Check the sound by playing the keyboard.

Repeat Steps 2–3 above to edit various
parameters.

If necessary, memorize the settings to
the Registration Memory (page 50).
The Voice-related settings are reset when a different Voice is selected. If you want to store the created sound for future recall, memorize the settings
to the Registration Memory.

Hold for longer
than a second.

Current Dual Voice

Rotate the dial to select the desired Dual
Voice.

Selecting a Split Voice

Hold down the [SPLIT ON/OFF] button
for longer than a second to call up the
“VOICE SELECT (SPLIT)” display.

Reference

Hold for longer
than a second.

Current Split Voice

Rotate the dial to select the desired Split
Voice.

DGX-660 Owner’s Manual

Style (Auto Accompaniment) Functions
Style Variations—Sections
Each Style consists of “Sections” that allow you to vary the arrangement of the accompaniment to match the performance you are playing.
Intro

Ending

Main

Fill-in

Intro
This is used for the beginning of the performance. When the Intro finishes, Style playback shifts to the
Main section. The length of the Intro (in measures) differs depending on the selected Style.

Main
This is used for playing the main part of the performance. Playback of the Main section repeats indefinitely until another Section’s button is pressed. There are two variations (A and B), and the Style playback
sound changes harmonically in response on the chords you play with your left hand.

Fill-in
This is automatically added before changing to Main A or B.

Ending

Press the [STYLE] button, then rotate
the dial to select a Style.

Press the [EXIT] button to return to the
MAIN display.

Press the [ACMP ON/OFF] button to turn
ACMP on.

Reference

This is used for the ending of the performance. When the Ending finishes, Style playback stops automatically. The length of the Ending (in measures) differs depending on the selected Style.

Press the [SYNC START] button to turn
Synchro Start on.
The indicator flashes when
Synchro Start is on.

Synchro Start
When Synchro Start is on, Style playback will
begin as soon as you play a chord in the Auto
Accompaniment range of the keyboard. Pressing
the [SYNC START] button alternately turns Synchro Start on or off.
Appears when ACMP is
turned on.

DGX-660 Owner’s Manual

Style (Auto Accompaniment) Functions

Press the [MAIN/AUTO FILL] button to
select Main A or Main B.

Current Section

Press the [INTRO/ENDING/rit.] button.

Now, you’re ready to start Style playback from the
Intro section.

Reference

Play a chord with your left hand to start
playback of the Intro.
For this example, play a C major chord (as shown
below). For information on how to enter chords,
see “Chords” on page 34.

Press the [INTRO/ENDING/rit.] button.

The Section switches to the Ending. When the
Ending is finished, Style playback stops automatically. You can have the Ending gradually slow
down (ritardando) by pressing the [INTRO/ENDING/rit.] button again while the Ending is playing
back.
Synchro Stop
When you press the [SYNC STOP] button to turn
on this function, the Style will only play while
pressing chords in the Auto Accompaniment range
of the keyboard. Releasing all the notes will stop
Style playback. This makes it easy to add rhythmic
breaks as you perform, simply by releasing your
hand from the Auto Accompaniment range of the
keyboard.

Pressing the [SYNC STOP] button alternately
turns Synchro Stop on or off.

Split point
Appears when the Synchro Stop
function is on.

Auto Accompaniment range

After the Intro finishes, play the keyboard according to the progression of
the performance you are playing.
Play chords with your left hand while playing
melodies with your right hand, and press the
[MAIN/AUTO FILL] button as necessary. The
Section will change to Fill-in then Main A or B.

DGX-660 Owner’s Manual

The Style plays while
you are playing the
keys.

Style playback stops
instantly when you
release the keys.

Style (Auto Accompaniment) Functions

Changing the Tempo

Adjusting the Volume of the Style

A Style can be played at any tempo you desire—fast
or slow.

You can adjust the volume balance between Style
playback and keyboard performance.

Press the [FUNCTION] button.

Use the CATEGORY [r] and [f] buttons to call up “Style Volume.”

Press the [TEMPO/TAP] button to call up
the Tempo display.

Current Tempo value

Style Volume

Rotate the dial to set a tempo.
Press the [+] and [-] buttons simultaneously to
instantly reset the value to the default tempo of the
current Style. You can change the tempo during
playback by pressing the [TEMPO/TAP] button
just twice at the required tempo.
NOTE

• The above operation applies also to Song playback
tempo.
Current value

You can start play back of the Style or Song by simply
tapping the [TEMPO/TAP] button at the required
tempo—four times for time signatures in 4 (4/4, etc.),
and three times for time signatures in 3 (3/4, etc.).

Rotate the dial to set the volume.

Reference

Tap Start

Playing Chords Without Style
Playback (Stop Accompaniment)
If you press the [STYLE] button, press the [ACMP
ON/OFF] button to turn ACMP on (the ACMP ON
icon appears), and play the chord in the left hand
range of the keyboard (with SYNC START off), the
chord sound will be heard without Style playback.
This is referred to as “Stop Accompaniment.” The
specified chord will be shown in the display, and
affects the Harmony function (page 31).

DGX-660 Owner’s Manual

Style (Auto Accompaniment) Functions

Setting the Split Point

Setting the Chord Fingering

The point on the keyboard that separates the left-hand
range and the right-hand range of the keyboard is
called the “Split Point.”
When a Style is selected and ACMP is on, the notes
played to the left of the Split Point are used to specify
the chord for Style playback. When the Split function
is on, the notes played to the left of the Split Point are
used to play the Split Voice.
The initial default Split Point is key number 54 (the
F#2 key), but you can change it to another key.

There are three different Fingering Types which let
you specify the chord type for Style playback or use
the entire keyboard range for chord specifying.

Press the [STYLE] button.

Holding down the [ACMP ON/OFF] button for longer than a second to call up
the “Chord Fingering” display.

Press the [FUNCTION] button.

Hold for longer
than a second.

Use the CATEGORY [r] and [f] buttons to call up “Split Point.”

Use the dial to select the desired setting.

Reference

1 (Multi Finger)

Recognizes the various chord types
which are listed on the separate Data
List, including “Easy Chords” (this
book, page 34).

2 (FullKeyboard)

Detects chords in the entire key
range. Chords are detected in a way
similar to 1 (Multi Finger), even if you
split the notes between your left and
right hands — for example, playing a
bass note with your left hand and a
chord with your right, or by playing a
chord with your left hand and a melody note with your right. In this mode,
Easy Chords cannot be detected.

3 (AI Fingered)

Less than three notes can be played
to indicate the chords (based on the
previously played chord, etc.).

Split Point

Rotate the dial to set the Split Point
between 021 (A-1) and 108 (C7).
Split point (54: F#2)

Split voice

Main voice

To restore the value to the default setting, press
[+]/[-] buttons simultaneously.
NOTE

• The Split Point set here is applied to both the Style and
Voice.
• During the Lesson playback, the Split Point cannot be
changed.

DGX-660 Owner’s Manual

Style (Auto Accompaniment) Functions

Looking Up Chords Using the Chord Dictionary
The Dictionary function is useful when you know the name of a certain chord and want to quickly learn how to
play it.

Playing range

Chord Type range

Press and hold the [MINUS ONE] button
for longer than a second to call up the
DICTIONARY display.

As an example, learn how to play a GM7
(G major seventh) chord.
2-1 Referring to the illustration, press the G key
in the “Chord Root” range so that “G” is
shown as the root note (no sound will be produced).

Chord Root range

Notation of chord

Highest key

Chord name (root and type)

Individual notes of chord (keyboard)

Reference

To call up possible inversions of the chord, press
the [+]/[-] buttons.
NOTE

• About major chords: Simple major chords are usually
indicated only by the root note. For example, “C” refers to
C major. However, when specifying major chords here,
make sure to select “M” (major) after pressing the root
note.

3
2-2 Referring to the illustration, press the M7
(major seventh) key in the “Chord Type”
range (no sound will be produced).
The notes you should play for the specified
chord (root note and chord type) are shown in
the display, both as notation and in the keyboard diagram.

Following the notation and keyboard
diagram in the display, try playing a
chord in the “Playing” range.
When you’ve played the chord properly, a bell
sound signals your success and the chord name in
the display will be highlighted.
To exit from this function, press the [EXIT] button.

DGX-660 Owner’s Manual

Song and Audio Settings
Background Music (BGM) Playback
With the default setting, pressing the [DEMO/BGM]
button will play back only Overview Demo Song
repeatedly. This setting can be changed so that, for
example, all internal Songs are played, or all Songs
and Audio files on a USB flash drive are played back,
letting you use the instrument as a background music
source. Five playback group settings are provided.
Simply select the one that suits your needs.

Hold down the [DEMO/BGM] button for
longer than a second to call up the
“Demo Group” display.
The current repeat playback target is shown.

Random Playback
The order of repeat playback via the [DEMO/BGM]
button can be changed between numerical and random
order.

Press the [FUNCTION] button.

Press the CATEGORY [r] or [f] buttons several times to select “Demo Play
Mode.”
The current playback mode, “1 (Normal)” or “2
(Random),” is shown.

Hold for longer
than a second.

Rotate the dial to select a repeat playback group from the table below.
1 (Demo)

Press the [DEMO/BGM] button to start
playback.
To stop playback, press the [DEMO/BGM] button
again.

Demo Play Mode

Overview Demo Song

Reference

2 (Preset)

All preset Songs

3 (User)

All User Songs

4 (Download)

All Songs transferred from a computer
All Song files (MIDI files) and Audio files in
the connected USB flash drive.
Playback Order
Since the files in the root folder on a USB
flash drive will be sorted in alphabetical
order regardless of the file type, you can
alternately playback several Songs and
Audio files in order as in this example:

5 (USB)
Song1.mid
Song1.wav
Song2.mid
Song2.wav
To do so, please make sure only the files to
be played back are in the root folder on a
USB flash drive and there are no other files
in the USB flash drive.

DGX-660 Owner’s Manual

When the “Demo Group” is set to “1 (Demo),”
this parameter cannot be set.

Rotate the dial to select “2 (Random).”
To return to numerical order, select “1 (Normal).”

Press the [DEMO/BGM] button to start
playback.
To stop playback, press the [DEMO/BGM] button
again.

Song and Audio Settings

Tempo Setting of the Song
This operation is same as that of the Style. Refer to
page 63.

Tap Start
This operation is same as that of the Style. Refer to
page 63.

Song Volume

Audio Volume
NOTE

• Audio volume can be adjusted while an Audio file is selected.

Press the [FUNCTION] button.

Press the CATEGORY [r] or [f] buttons several times to call up “Audio Volume.”

NOTE

• Song volume can be adjusted while a Song is selected.

Press the [FUNCTION] button.

Press the CATEGORY [r] or [f] buttons several times to call up “Song Volume.”

Audio Volume

Rotate the dial to set the Audio volume.

Reference

Song Volume

Rotate the dial to set the Song volume.

DGX-660 Owner’s Manual

Song and Audio Settings

Changing the Voice of the Song
You can change the Voice of Track 1 or 2 in the current Preset Song temporarily to any other desired
Voice.

Press the [SONG/AUDIO] button, select
the desired Preset Song, then start playback.

Hold down the [VOICE] button for longer
than a second to call up the “VOICE
SELECT (MELODY R)” display for
selecting a Voice.
Pressing the [VOICE] button alternates the display
between VOICE SELECT (MELODY R) and
VOICE SELECT (MELODY L), then select the
desired display. Melody R is the Track 1 Voice,
and Melody L is the Track 2 Voice.

Hold for longer
than a second.

Reference

Rotate the dial to select the desired
Voice.
As you select different Voices, the Melody Voice
of the Song changes while the Song remains the
same.

DGX-660 Owner’s Manual

Specifying the Channel for the
Lesson Part
When using external Songs (only SMF format 0 and
1) in a USB flash drive (or transferred from a computer) for lessons you can specify which channels are
to be played back as the right-hand and left-hand
parts. The default settings are channel 1 for the righthand part and channel 2 for the left-hand part.

Press the [SONG/AUDIO] button and
select the Song (106–) for which you
want to set the guide track.

Press the [FUNCTION] button.

Use the CATEGORY [r] and [f] buttons to select the “Right-Part” or “LeftPart.”

Use the dial to select the channel you
want to play back as the specified rightor left-hand part.

Connecting a Microphone and Singing Along with Your Performance
By connecting a microphone to the MIC INPUT jack (standard 1/4” phone jack), you can
enjoy singing along with your keyboard performance or with Song playback. The
instrument outputs your vocals through the built-in speakers. You can enjoy the three
preset settings by just selecting one of them according to the particular circumstances
and your personal preferences, or you can create your own desired settings and save
them.

Connecting a Microphone
Before turning on the power of the
instrument, set the MIC VOLUME knob
to the minimum position.

MIC ON/OFF

INPUT LEVEL

6
2

Select “MIC” by using the CATEGORY
[r] or [f] button, then set it to “ON”
by rotating the dial.

Connect a microphone to the MIC INPUT
jack.
NOTE

• Make sure to use a conventional dynamic microphone.

Turn on the power of the instrument.

Press the [MIC SETTING] button once or
twice to call up the MIC SETTING 1 display.

(If necessary, turn on the microphone.)
Adjust the MIC VOLUME knob while
singing into the microphone.
Adjust the MIC VOLUME knob so that the
INPUT LEVEL meter is not off the scale (or
“pinned” continuously to the right). If the INPUT
LEVEL meter is off the scale, distortion may be
produced.

Reference

Disconnecting the microphone
Set the MIC VOLUME knob to the minimum position then disconnect the microphone from the MIC
INPUT jack.
NOTE

• You can assign the function of switching the MIC ON/OFF
to pedals. Refer to “Assigning specific functions to the
pedal” (page 21).

DGX-660 Owner’s Manual

Connecting a Microphone and Singing Along with Your Performance

Selecting a Preset Setting

1
2

Press the [MIC SETTING] button once or
twice to call up the MIC SETTING 1 display.
Select “PRESET” by using the CATEGORY [r] or [f] button, then select
the desired one of “STANDARD”,
“BRIGHTER” and “LOUDER” by rotating
the dial.

Making and Saving the Microphone Settings
This section explains how to make and save the
detailed settings for the microphone. Only one group
of settings can be saved to USER data.

Connect a microphone to the instrument, then press the [MIC SETTING] button once or twice to call up the MIC
SETTING 1 or 2 display.
MIC SETTING 1 display

MIC SETTING 2 display

Reference

STANDARD

The STANDARD setting provides optimum
response over the entire frequency spectrum ensuring all vocals sound good.

BRIGHTER

The BRIGHTER setting emphasizes
higher frequencies making vocals stand
out more in the mix.

LOUDER

The LOUDER setting compresses the
overall signal which increases both the
level of your voice and softer sounds.

If you want to make your original settings, set various parameters (including those on MIC SETTING 2) then save the setting as the USER data.
For details, see next section.

DGX-660 Owner’s Manual

Use the CATEGORY [r] or [f] button
to select the specific parameter to be
adjusted.
For information on each parameter, see below.

Set the value of the specific parameter
by rotating the dial.

Connecting a Microphone and Singing Along with Your Performance

MIC SETTING 1 display
MIC ON/
OFF*

Turns the microphone sound on or off.

INPUT
LEVEL

Indicates the input level.

PRESET*

Calls up one of the preset settings (STANDARD,
BRIGHTER and LOUDER) or the settings saved
as USER.

VOLUME

Determines the output volume of the microphone
sound.

PAN

Determines the stereo pan position of the microphone sound.
REVERB

Determines the depth of the reverb
effect applied to the microphone
sound.

CHORUS

Determines the depth of the chorus
effect applied to the microphone
sound.

EFFECT
SEND

RESET

Resets the values of parameters on MIC SETTING 1 and 2 displays to the default when one of
the preset type is selected. When “USER” is
selected, this resets them to the latest saved
value.

Press the [EXECUTE] button to save the
settings.
The save confirmation message will appear on the
display.

NOTICE
• The Save operation will delete the previously saved
USER data.
NOTE

• To cancel this operation, press the [-] (NO) button.

Press the [+] (YES) button to actually
save the settings.

Press the [EXIT] button to exit from the
MIC SETTING display.

* The settings marked with * (asterisk) will be maintained even if
you turn off the power.

MIC SETTING 2 display

NOISE
GATE

ON/OFF

Turns the Noise Gate on or off. This
effect mutes the input signal when
the input signal falls below a specified level.

TH.
Adjusts the input level at which the
(Threshold) gate begins to open.

COMPRESSOR

Turns the Compressor on or off. This
effect holds down the output when
the input signal from the microphone exceeds a specified level.

TH.
Adjusts the input level above which
(Threshold) the Compressor is applied.

RATIO

Adjusts the compression ratio.
Higher ratios result in a more compressed sound, making soft sounds
louder, but reducing the dynamic
range.

OUT

Adjusts the final output level.

EQ (Equalizer) is a processor that divides the frequency spectrum into multiple bands which can
be boosted or cut as required to tailor the overall
frequency response.
3 BAND EQ
Hz

Adjusts the center frequency of the
corresponding band.

Boosts or cuts the level of the corresponding band by up to 12 dB.

Calling Up the Microphone Settings Saved to USER

Press the [MIC SETTING] button once or
twice to call up the MIC SETTING 1 display.

Select “PRESET” by using the CATEGORY [r] or [f] button, then select
“USER” by rotating the dial.

Reference

ON/OFF

NOTICE
• The settings here are lost if you turn off the power without
executing the Save operation (See below).

DGX-660 Owner’s Manual

The Functions
The “Functions” provide access to a range of detailed instrument parameters such as
Tuning, Split Point, Voices and Effects. Take a look at the Function List (pages 73–75).
When you find the desired Function you want to change, follow the instructions below.

Find the desired item in the Function
List on pages 73–75.

Press the [FUNCTION] button to call up
the FUNCTION display.

Use the dial, the [+] and [-] buttons, or
the [0]–[9] number buttons to set the
value of the selected function.
To restore the default value, press the [+] and [-]
buttons simultaneously. In the sole case of the
MIDI Initial Send function, pressing the [+] button
executes the function while pressing [-] cancels it.

Direct numeric
entry.

Press the CATEGORY [r] or [f] buttons several times until the desired item
appears.

Reference

Next item

Previous item

Current item

Value

DGX-660 Owner’s Manual

• Decrease
value by 1.
• OFF
• Cancel

Press simultaneously to recall the
default setting.

• Increase
value by 1.
• ON
• Execute

Some Function settings are maintained even if you
turn off the power, and can be transferred to the computer as Backup Data (page 52).

The Functions

Function List

Volume

Function

Range/Settings

Default Value

Description

Style Volume

000–127

100

Refer to page 63.

Song Volume

000–127

100

Refer to page 67.

Audio Volume

000–127

100

Determines the volume of the Audio file.

Wireless LAN
Volume

000–127

100

Determines the volume of the Wireless LAN Audio.

AUX IN Level

000–127

100

Determines the volume of the sound input via the AUX IN
jack.

Transpose

-12–+12

Refer to page 55.

415.3Hz–466.2Hz

440.0Hz

Tuning
Pitch Bend Range

Refer to page 56.
Sets the range over which you can control pitch by using the
PITCH BEND wheel (page 56), in semitone increments.

01–12

021 (A-1)–108 (C7)

054 (F#2)

Refer to page 64.

Touch Response

1 (Soft)/
2 (Medium)/
3 (Hard)/
4 (Fixed)

2 (Medium)

Refer to page 57.

Chord Fingering

1 (Multi Finger)/
2 (FullKeyboard)/
3 (AI Fingered)

Split Point
Overall

Main Volume
Main Octave

1 (Multi Finger) Refer to page 64.

000–127

-2–+2

Determines the volume of the Main Voice.

Determines the octave range for the Main voice.

000 (left)–
64 (center)–
127 (right)

Determines the stereo pan position of the Main Voice. A
value of “0” results in the sound being panned full left; a
value of “127” results in the sound being panned full right.

Main Reverb Level

000–127

Determines how much of the Main Voice’s signal is sent to
the Reverb effect.

Main Chorus Level

000–127

Determines how much of the Main Voice’s signal is sent to
the Chorus effect.

Main DSP Level

000–127

Determines how much of the Main voice’s signal is sent to
the DSP effect.

Dual Volume

000–127

Determines the volume of the Dual Voice.

Dual Octave

-2–+2

Determines the octave range for the Dual voice.

000 (left)–
64 (center)–
127 (right)

Determines the stereo pan position of the Dual Voice. A
value of “0” results in the sound being panned full left; a
value of “127” results in the sound being panned full right.

Dual Voice
(pages 28, 60) Dual Reverb Level

000–127

Determines how much of the Dual Voice’s signal is sent to
the Reverb effect.

Dual Chorus Level

000–127

Determines how much of the Dual Voice’s signal is sent to
the Chorus effect.

Dual DSP Level

000–127

Determines how much of the Dual Voice’s signal is sent to
the DSP effect.

Split Volume

000–127

080

-2–+2

Main Pan
Main Voice
(page 27)

Dual Pan

Split Octave

Split Voice
(pages 28, 60)

Determines the volume of the Split Voice.
Determines the octave range for the Split voice.

000 (left)–
64 (center)–
127 (right)

064

Determines the stereo pan position of the Split Voice. A
value of “0” results in the sound being panned full left; a
value of “127” results in the sound being panned full right.

Split Reverb Level

000–127

008

Determines how much of the Split Voice’s signal is sent to
the Reverb effect.

Split Chorus Level

000–127

000

Determines how much of the Split Voice’s signal is sent to
the Chorus effect.

Split Pan

Reference

Category

Metronome
(page 29)

Score

Function

Range/Settings

Default Value

Description

Time Signature Numerator

1–60

Determines the time signature of the Metronome.

Time Signature Denominator

2/4/8/16

Determines the length of each metronome beat.

Bell

ON/OFF

Determines whether a bell accent will be sounded (ON) or
not (OFF).

Metronome Volume

000–127

100

Determines the volume of the Metronome.

Quantize

1 (1/4 note)/
2 (1/4 note triplet)/
3 (1/8 note)/
4 (1/8 note triplet)/
5 (1/16 note)/
6 (1/16 note triplet)/
7 (1/32 note)/
8 (1/32 note triplet)

–

Depending on the Song data, you can make the score more
readable by adjusting the timing of the notes. This determines the minimum timing resolution used in the Song. For
example, if there are both quarter notes and eighth notes in
the Song, you should set this value to “eighth note.” Any
notes or rests shorter than this value will not be shown in
the score.

Right-Part

CH 01, 02...15, 16,
OFF

CH 01

Determines the guide track number for your right hand lesson. The setting is effective for Songs in SMF format 0 and
1 that are transferred from an external device.

Left-Part

CH 01, 02...15, 16,
OFF

CH 02

Determines the guide track number for your left hand lesson. The setting is effective for Songs in SMF format 0 and
1 that are transferred from an external device.

Song/Lesson

Grade

ON/OFF

1 (Demo)/
2 (Preset)/
3 (User)/
4 (Download)/
5 (USB)

1 (Demo)

Refer to page 66.

1 (Normal)/
2 (Random)

1 (Normal)

Refer to page 66.

ON/OFF

OFF

Speaker Control

NORMAL/
ALWAYS ON

NORMAL

Refer to page 58.

Auto Power Off

OFF/5/10/15/30/60/
120 (min.)

Refer to page 19.

Demo Group

Demo
Demo Play Mode

Demo Cancel

Determines whether the Grade function is on or off.

Determines whether Demo cancel is enabled or not. When
this is set to ON, the Demo Song will not play, even if the
[DEMO/BGM] button is pressed.

Reference

Lesson

Utility

* The appropriate value is automatically set for each Voice combination.
** The appropriate value is automatically set for each Song or Style.
*** For details, refer to “Computer-related Operations” (page 8).

PC Mode
The PC settings instantly reconfigure all important MIDI settings (as shown below). This setting is not necessary
when transferring files between the computer and the instrument via Musicsoft Downloader.
PC1

PC2

Local

OFF

OFF
ON

External Clock

OFF

Song Out

OFF

Style Out

OFF

Keyboard Out

OFF

NOTE

• Preset Song data cannot be transmitted from the instrument by the Song Out function, but User Songs can.

DGX-660 Owner’s Manual

Connections – Using Your Instrument with Other Devices –
To see where the connectors are located on the instrument, refer to pages 16, 17.
CAUTION
• Before connecting the instrument to other electronic components, turn off the power of all the components. Also, before turning any components on or off, make sure to set all volume levels to minimum (0). Otherwise, damage to the components, electrical shock, or even permanent hearing loss may occur.

Connecting an Audio Device
(AUX IN jack)

Connecting to a Computer (USB
TO HOST terminal)

You can connect the output jack of an external device
such as portable audio player to the instrument’s AUX
IN jack, letting you hear the sound of that device
through the built-in speakers of the instrument.

By connecting a computer to the USB TO HOST terminal, you can transfer data between the instrument
and the computer via MIDI. For details on using a
computer with this instrument, refer to “Computerrelated Operations” on the website (page 8).

NOTICE
• To avoid damaging the device, first turn on the power to
the external device, then to the instrument. When turning
off the power, first turn off the power to the instrument,
then to the external device.

USB TO HOST
terminal

USB
terminal

USB
cable
Instrument

NOTICE
• Use an AB type USB cable of less than 3 meters. USB 3.0
cables cannot be used.
Stereo
mini plug

NOTE

Reference

• The instrument will begin transmission a short time after the
USB connection is made.

Audio device (portable
audio player, etc.)

NOTE

• Use audio cables and adaptor plugs having no (zero) resistance.
• You can adjust the volume of the sound input via the AUX IN
jack from the external audio device. To do this, press the
[FUNCTION] button then use the CATEGORY buttons to select
“AUX IN Level,” then adjust the value by using the dial.

DGX-660 Owner’s Manual

• When using a USB cable to connect the instrument to your
computer, make the connection directly without passing
through a USB hub.
• For information on setting up your sequence software, refer to
the owner’s manual of the relevant software.

Connections – Using Your Instrument with Other Devices –

By connecting this instrument to a smart device, such
as an iPhone or iPad, you can use apps on that device
together with the instrument for a variety of musical
purposes, take advantage of various convenient functions, and get more enjoyment out of this instrument.
Make connections by using one of the following
methods.
NOTE

• Before using the USB TO DEVICE terminal, be sure to read
“Precautions when using the USB TO DEVICE terminal” on
page 80.

• Connect to the USB TO DEVICE terminal via the
USB wireless LAN adaptor UD-WL01 (sold separately; may not be available in some areas).
• Connect to the USB TO HOST terminal via the
USB cable for iPhone/iPad.
For details on connections, refer to the “iPhone/iPad
Connection Manual” on the website (page 8) and the
“Wireless LAN Settings” (See next section).
For information about the compatible smart devices
and application tools, access the following page:

Wireless LAN Settings
By using the USB wireless LAN adaptor UD-WL01
(sold separately), you can connect the instrument to
an iPhone/iPad via a wireless network. For general
operating instructions, refer to the “iPhone/iPad Connection Manual” on the website (page 8). This section
covers operations that are specific to this instrument.
Choosing the Connection Type
You can use one of connection modes: Infrastructure or
Access Point. Select one which is most suitable for your
network environment.
Infrastructure mode: The “Infrastructure” mode uses
an access point for data communication, between the
USB wireless LAN adaptor UD-WL01 and a network.
Access Point mode: The “Access Point” mode allows
you to directly connect the USB wireless LAN adaptor UD-WL01 and your iPhone/iPad, without using
an access point. Please note that when your instrument is set to Access Point mode, no Internet access
is available on your iPhone/iPad, limiting part of
their functions, such as mailing and searching.

Turn off the power to the instrument.

Connect the USB wireless LAN adaptor
UD-WL01 to the USB TO DEVICE terminal of the instrument.

Turn on the power to the instrument.

Press the [FILE CONTROL] button to call
up the FILE CONTROL display.

http://www.yamaha.com/kbdapps/

Reference

Connecting to an iPhone/iPad
(USB TO DEVICE, USB TO
HOST terminals)

NOTICE
• Do not place your iPhone/iPad in an unstable position.
Doing so may cause the device to fall and result in damage.
NOTE

• When you use the instrument along with an application on
your iPhone/iPad, we recommend that you first set “Airplane
Mode” to “ON” then set “Wi-Fi” to “ON” on your iPhone/iPad
in order to avoid noise caused by communication.
• Certain applications may not be supported in your area.
Please check with your Yamaha dealer.

DGX-660 Owner’s Manual

Connections – Using Your Instrument with Other Devices –

Use the CATEGORY [r] or [f] button
to select “Wireless LAN.”

Infrastructure Mode

Network list
NOTE

• When “Wireless LAN” cannot be found even though the
USB wireless LAN adaptor has been connected, turn the
instrument off then on again.

Reference

Network list

Press the [EXECUTE] button to call up
the WIRELESS LAN display.
“WIRELESS LAN - Infrastructure Mode” is the
default setting.

Use the CATEGORY [r] or [f] button
to select the desired operation, then
press the [EXECUTE] button.
This operation lets you change the connection
mode.
For information on the WIRELESS LAN displays,
see the next section.

Connecting to a network by selecting from the
list
1. Select the desired network by rotating the dial.
2. Press the [EXECUTE] button.
For a network without a lock icon, this finishes
connecting to the network.
For a network having a lock icon (
), the
PASSWORD display appears.
3. Enter the password on the PASSWORD display
by rotating the dial.
4. Select “Connect” by using the CATEGORY [r]
or [f] button, then press the [EXECUTE] button.
Connecting to a network manually
1. Select “Other” displayed at the very end of the
list by rotating the dial.
2. Press the [EXECUTE] button to call up the
OTHER NETWORK display.
3. Make SSID, security, and password settings by
rotating the dial.
4. Select “Connect” by using the CATEGORY [r]
or [f] button, then press the [EXECUTE] button.
UPDATE

Updates the network list on the display.

WPS

Connects this instrument to the network via WPS.
NOTE

• Make sure that your access point supports
WPS. About the confirmation and changes in
the access point settings, refer to the manual
of the access point.

NOTE

• For information on entering characters for the password
or settings, refer to page 83.

1. Select “WPS” by using the CATEGORY [r] or
[f] button, then press the [EXECUTE] button.
2. Press the WPS button on your access point
within two minutes.
INITIALIZE

DGX-660 Owner’s Manual

Select your personal network from this list to connect automatically, or input the desired one manually. Use the CATEGORY [r] or [f] button to
select this area, and then follow the instructions
below.

Initializes the connection setup to the default factory status.

Connections – Using Your Instrument with Other Devices –

DETAIL

Set detailed parameters from the pages below.
Page 1/2: For setting the IP address and other
related parameters.
Page 2/2: For entering the Host name or showing MAC address, etc.

Access Point Mode

Use the CATEGORY [r] or [f] button to select
the parameters, and then use the dial to set the
value. After making the settings, select “SAVE” on
page 2/2 by using the CATEGORY [r] or [f]
button, and press the [EXECUTE] button to actually save them.
Switches to the Access Point mode.

Displaying the wireless network settings.

INITIALIZE

Initializes the connection setup to the default factory status.

DETAIL

Set detailed parameters from the pages below.
Page 1/2: For setting the SSID, channel, security, password, IP address and other related
parameters.
Page 2/2: For entering the Host name or showing MAC address, etc.
Use the CATEGORY [r] or [f] button to select
the parameters, and then use the dial to set the
value. After making the settings, select “SAVE” on
page 2/2 by using the CATEGORY [r] or [f]
button and press the [EXECUTE] button to actually save them.

MODE
CHANGE

Switches to the Infrastructure mode.

For information on making settings for/on your
iPhone/iPad, refer to the “iPhone/iPad Connection
Manual” on the website (page 8).

DGX-660 Owner’s Manual

Reference

MODE
CHANGE

USB Flash Drive Operations
By connecting the USB flash drive to the USB TO DEVICE terminal, you can save the
data created on this instrument, such as User Song and parameter settings. The saved
data can be recalled to this instrument again for future use.

Precautions when using the USB TO
DEVICE terminal
This instrument features a built-in USB TO
DEVICE terminal. When connecting a USB device
to the terminal, be sure to handle the USB device
with care. Follow the important precautions below.
NOTE

• For more information about the handling of USB devices,
refer to the owner’s manual of the USB device.

Compatible USB devices

• USB flash drive
• USB wireless LAN adaptor (UD-WL01) (may
not be available depending on your area)
Other USB devices such as a USB hub, computer
keyboard or mouse cannot be used.
The instrument does not necessarily support all
commercially available USB devices. Yamaha cannot guarantee operation of USB devices that you
purchase. Before purchasing a USB device for use
with this instrument, please visit the following web
page:

Reference

http://download.yamaha.com/
Although USB devices 1.1 to 3.0 can be used on
this instrument, the amount of time for saving to or
loading from the USB device may differ depending
on the type of data or the status of the instrument.
NOTE

• The rating of the USB TO DEVICE terminal is a maximum
of 5V/500mA. Do not connect USB devices having a rating
above this, since this can cause damage to the instrument
itself.

Connecting USB device

When connecting a USB device to the USB TO
DEVICE terminal, make sure that the connector on
the device is appropriate and that it is connected in
the proper direction.

DGX-660 Owner’s Manual

NOTICE
• Avoid connecting or disconnecting the USB device
during playback/recording and file management operations (such as Save, Delete and Format), or when
accessing the USB device. Failure to observe this may
result in “freezing” of the operation of the instrument
or corruption of the USB device and the data.
• When connecting then disconnecting the USB device
(and vice versa), make sure to wait a few seconds
between the two operations.
NOTE

• When connecting a USB cable, make sure that the length
is less than 3 meters.

Using a USB flash drive

By connecting the instrument to a USB flash drive,
you can save data you’ve created to the connected
device, as well as read data from the connected
USB flash drive.
Maximum number of USB flash drive allowed
Only one USB flash drive can be connected to the
USB TO DEVICE terminal.
Formatting USB flash drive
You should format the USB flash drive only with
this instrument (page 82). A USB flash drive formatted on another device may not operate properly.
NOTICE
• The format operation overwrites any previously existing
data. Make sure that the USB flash drive you are formatting does not contain important data.

To protect your data (write-protect)
To prevent important data from being inadvertently
erased, apply the write-protect provided with each
USB flash drive. If you are saving data to the USB
flash drive, make sure to disable write-protect.
Turning off the instrument
When turning off the instrument, make sure that
the instrument is NOT accessing the USB flash
drive by playback/recording or file management
(such as during Save, Delete and Format operations). Failure to do so may corrupt the USB flash
drive and the data.

USB Flash Drive Operations

Connect a USB flash drive to the USB
TO DEVICE terminal, being careful to
insert it with the proper orientation.

A message (information or confirmation dialog)
sometimes appears on the display to facilitate
operation. Refer to the “Messages” on page 89 for
an explanation of each message.

Wait for confirmation that the USB flash
drive has been properly mounted.

Mounting
(Flashing)

Calling up the FILE CONTROL display
Pressing the [FILE CONTROL] button while the USB
flash drive is connected to the USB TO DEVICE terminal calls up the FILE CONTROL display.

You can access file operations listed below by pressing
the CATEGORY [r] or [f] buttons from the FILE
CONTROL display.
Menu
Format

Reference page
82

Regist Save

User Song Save

Audio Save

Load

USB Delete

User Delete

Reference

Connecting a USB Flash Drive

If you press the [FILE CONTROL] button while an
unformatted USB flash drive is connected to the instrument, the “Format” function will automatically be
selected.
Mounted
(Lit)

To exit from the FILE CONTROL display press the
[EXIT] button.
NOTE

• No sound will be produced if you play the keyboard
while the FILE CONTROL display is showing. Also, in
this state only buttons related to file functions will be
active.
NOTE

• The FILE CONTROL display will not appear in any of
the following cases:
• During Style, Song or Audio playback.
• During Lesson and Style Recommender.
• While data is being loaded from a USB flash
drive.

DGX-660 Owner’s Manual

USB Flash Drive Operations

Formatting a USB Flash Drive
The Format operation lets you prepare commercially
available USB flash drive for use with this instrument.
NOTICE
• If a USB flash drive that contains data is formatted as
described below, the data will be erased. Make sure that a
USB flash drive to be formatted contains no important data
before carrying out the formatting procedure.

Reference

Press the [FILE CONTROL] button to call
up the FILE CONTROL display.

Use the CATEGORY [r] or [f] buttons
to call up “Format.”

Press the [EXECUTE] button.
A confirmation message will appear. To cancel the
operation, press the [-] (NO) button.

Press the [EXECUTE] button again or
the [+] (YES) button to execute the Format operation.
After a while, a message indicating completion of
the operation appears, and the “USER FILES”
folder will be created on the root directory in the
USB flash drive.
NOTICE
• The Format operation cannot be cancelled during execution. Never turn off the power or disconnect the USB
flash drive during the operation. Doing so may result
in data loss.

DGX-660 Owner’s Manual

Press the [EXIT] button to exit from the
FILE CONTROL display.

USB Flash Drive Operations

Saving a Registration Memory to USB Flash Drive

Press the [FILE CONTROL] button to call
up the FILE CONTROL display.

Use the CATEGORY [r] or [f] buttons
to call up “Regist Save.”
A default file name will automatically be created.

Entering Characters
The [-] button moves the cursor to the left, and the
[0] button moves it to the right.
Use the dial to select a character for the current cursor location.
The [+] button deletes the character at the cursor
location.

Cursor
left

Cursor
right

Delete
character

The dial selects
characters

Press the [EXECUTE] button.
A confirmation message will appear. To cancel the
operation, press the [-] (NO) button.

Press the [EXECUTE] button again, or
the [+] (YES) button to execute the Save
operation.
After a while, a message indicating completion of
the operation appears.
Registration Memory will be saved in a folder
labeled “USER FILES” which will automatically
be created on the USB flash drive.

To Overwrite an Existing File
If you want to overwrite a file that already exists on
the USB flash drive, use the dial or the [+] and [-]
buttons to select the file, then skip ahead to step 5.
NOTE

NOTICE

• Up to 100 User files can be saved to a single USB flash
drive.

Change the file name as necessary.

Reference

This operation saves a Registration Memory to a USB
flash drive device. The file name will have a “.usr”
extension which does not appear in the instrument’s
display.

• If an existing file name is specified, the display
prompts you for confirmation. Press [EXECUTE] or [+]
if it is OK to overwrite the file, or [-] to cancel.

Press the [EXECUTE] button.
A cursor will appear below the first character in
the file name.

NOTICE
• The Save operation cannot be cancelled during execution. Never turn off the power or disconnect the USB
flash drive during the operation. Doing so may result
in data loss.

Press the [EXIT] button to exit from the
FILE CONTROL display.
NOTE

• If you want to recall the Registration Memory (.usr) to this
instrument again, execute the Load operation (page 86).
NOTE

Cursor

• The amount of time it will take to perform the Save operation will depend on the condition of the USB flash drive.

DGX-660 Owner’s Manual

USB Flash Drive Operations

Saving a User Song to USB Flash Drive
This operation saves a User Song (Song numbers
101–105) to USB flash drive.

Press the [FILE CONTROL] button to call
up the FILE CONTROL display.

Use the CATEGORY [r] or [f] buttons
to call up “User Song Save.”
The SOURCE FILE—a User Song name—will be
highlighted.

Cursor

Reference

Use the dial to select the User Song you
want to save.

Press the [EXECUTE] button.
The DESTINATION FILE parameter will be highlighted, and a default name will automatically be
created.

The name of the
file to be saved

Change the file name as necessary.
Refer to “Saving a Registration Memory to USB
Flash Drive” on page 83 for filename entry.

Press the [EXECUTE] button.
A confirmation message will appear. To cancel the
operation, press the [-] (NO) button.

Press the [EXECUTE] button again, or
the [+] (YES) button to execute the Save
operation.
After a while, a message indicating completion of
the operation appears.
The User Song will be saved in a folder labeled
“USER FILES” which will automatically be created on the USB flash drive.

The source User
Song name.

Press the [EXECUTE] button.
A cursor will appear below the first character in
the file name.

NOTICE
• If an existing file name is specified, the display
prompts you for confirmation. Press [EXECUTE] or [+]
if it is OK to overwrite the file, or [-] to cancel.

NOTICE
• The Save operation cannot be cancelled during execution. Never turn off the power or disconnect the USB
flash drive during the operation. Doing so may result
in data loss.

To Overwrite an Existing File
If you want to overwrite a file that already exists on
the USB flash drive, use the dial to select the file,
then skip ahead to step 7.

Press the [EXIT] button to exit from the
FILE CONTROL display.
NOTE

• The amount of time it will take to perform the Save operation will depend on the condition of the USB flash drive.

DGX-660 Owner’s Manual

USB Flash Drive Operations

Converting a User Song to an Audio file
This operation converts a User Song (Song numbers
101–105) to an Audio file and saves the file to the
USB flash drive.
NOTE

• Only User Songs can be converted to Audio files.

Press the [FILE CONTROL] button to call
up the FILE CONTROL display.

Use the CATEGORY [r] or [f] buttons
to call up “Audio Save.”
The SOURCE FILE—a User Song name—will be
highlighted.

Press the [EXECUTE] button.
A confirmation message will appear. To cancel the
operation, press the [-] (NO) button.

Press the [EXECUTE] button again, or
the [+] (YES) button to execute the Save
(Convert) operation.
This operation starts playback and conversion
from a User Song to an audio file. If you input
audio signals via the AUX IN jack during conversion, that sound also will be recorded.
After a while, a message indicating completion of
the operation appears.
The Audio file will be saved in a folder labeled
“USER FILES” which will automatically be created on the USB flash drive.
NOTICE
• If an existing file name is specified, the display
prompts you for confirmation. Press [EXECUTE] or [+]
if it is OK to overwrite the file, or [-] to cancel.

NOTICE
• Never turn off the power or disconnect the USB flash
drive during the operation. Doing so may result in data
loss.

The source User
Song name.

Use the dial to select the User Song you
want to convert.

Press the [EXECUTE] button.
The DESTINATION AUDIO FILE parameter will
be highlighted, and a default name will automatically be created.

Press the [EXIT] button to exit from the
FILE CONTROL display.

Reference

NOTE

• The amount of time it takes to perform the Save operation
depends on the condition of the USB flash drive.

To Overwrite an Existing File
If you want to overwrite a file that already exists on
the USB flash drive, use the dial to select the file,
then go on to the next step.

DGX-660 Owner’s Manual

USB Flash Drive Operations

Loading Files from a USB Flash Drive
Registration Memory, Style file and Song file (SMF)
residing on a USB flash drive can be loaded into the
instrument.

NOTICE
• If you load a Registration Memory, data will be overwritten
by the newly loaded data. Save important data to a USB
flash drive before loading data that will overwrite it.

NOTICE
• The Load operation cannot be cancelled during execution. Never turn off the power or disconnect the USB
flash drive during the operation. Doing so may result
in data loss.

Press the [FILE CONTROL] button to call
up the FILE CONTROL display.

Reference

Use the CATEGORY [r] or [f] buttons
to call up “Load.”

Use the dial to select the file you want to
load.
All Registration Memory files in the USB flash
drive will be displayed first, followed by the Style
files and Song files.
Files must be located in the “USER FILES” folder
in the USB flash drive. Files located outside of
that folder will not be recognized.

Press the [EXECUTE] button.
A confirmation message will appear. To cancel the
operation, press the [-] (NO) button.

DGX-660 Owner’s Manual

Press the [EXECUTE] button again, or
the [+] (YES) button to execute the Load
operation.
After a while, a message indicating completion of
the operation appears.

Press the [EXIT] button to exit from the
FILE CONTROL display.

Deleting files from a USB Flash
Drive

Deleting User Data from the
Instrument

This procedure deletes Registration Memory, Style
file, Song file and Audio file from a USB flash drive.

This procedure deletes User Song files as well as
Style and Song files loaded or transferred from an
external device such as a computer. This operation
does not erase the Preset data.

1
2

Press the [FILE CONTROL] button to call
up the FILE CONTROL display.
Use the CATEGORY [r] or [f] buttons
to call up “USB Delete.”

Use the dial to select the file you want to
delete.
All Registration Memory files in the USB flash
drive will be displayed first, followed by the Song
files, Audio files and Style files.
Files must be located in the “User Files” folder in
the USB flash drive. Files located outside of that
folder will not be recognized.

Press the [FILE CONTROL] button to call
up the FILE CONTROL display.

Use the CATEGORY [r] or [f] buttons
to call up “User Delete.”
Only “User Delete” can be selected if no USB
flash drive is connected to the instrument.

Use the dial to select the file you want to
delete.
All User Songs will be displayed first, followed by
the Song and Style files.

Press the [EXECUTE] button.
A confirmation message will appear. To cancel the
operation, press the [-] (NO) button.

Press the [EXECUTE] button again, or
the [+] (YES) button to execute the
Delete operation.
After a while, a message indicating completion of
the operation appears.

NOTICE

• The Delete operation cannot be cancelled during execution. Never turn off the power or disconnect the USB
flash drive during the operation. Doing so may result
in data loss.

Press the [EXIT] button to exit from the
FILE CONTROL display.

Reference

USB Flash Drive Operations

• The Delete operation cannot be cancelled during execution. Never turn off the power or disconnect the USB
flash drive during the operation. Doing so may result
in data loss.

Press the [EXIT] button to exit from the
FILE CONTROL display.

DGX-660 Owner’s Manual

Appendix

Troubleshooting
For the Instrument
Problem

Possible Cause and Solution

When the instrument is turned on or off, a popping
sound is temporarily produced.

This is normal and indicates that the instrument is receiving electrical
power.

The power is automatically turned off.

This is normal and due to the Auto Power Off function. If necessary, set
the parameter of the Auto Power Off function (page 19).

When using a mobile phone, noise is produced.

Using a mobile phone in close proximity to the instrument may produce
interference. To prevent this, turn off the mobile phone or use it further
away from the instrument.

Noise is heard from the instrument’s speakers or
headphones when using the instrument with an
iPhone/iPad application.

When you use the instrument along with an iPhone/iPad application, we
recommend that you set “Airplane Mode” to “ON” on your iPhone/iPad in
order to avoid noise caused by communication.

There is no sound even when the keyboard is
played or when a Style or Song is being played
back.

Check that nothing is connected to the PHONES/OUTPUT jack on the
rear panel. When a plug is connected to this jack, no sound is output.
Check the Local Control on/off setting (“Local”). (See page 74.)
Is the FILE CONTROL display showing? The instrument’s keyboard,
etc., will not produce any sound while the FILE CONTROL display is
showing. Press the [EXIT] button to return to the MAIN display.

Playing keys in the right hand area of the keyboard
does not produce any sound.

When using the Dictionary function (page 65), the keys in the right hand
area are used only for entering the chord root and type.

The Style or Song does not play back when the
[START/STOP] button is pressed.

Is External Clock set to ON? Make sure External Clock is set to OFF;
refer to “External Clock” on page 74.

The Style does not sound properly.

Make sure that the Style Volume (page 63) is set to an appropriate level.
Is the Split Point set at an appropriate key for the chords you are playing? Set the Split Point at an appropriate key (page 64).
Is the “ACMP” indicator showing in the display? If it is not showing press
the [ACMP ON/OFF] button so that it does show.

Appendix
88

No rhythm accompaniment plays when the [START/
STOP] button is pressed after selecting style number 174 or a style between 188–205 (Pianist).

This is not a malfunction. Style number 174 and style numbers 188–205
(Pianist) have no rhythm parts, so no rhythm will play. The other parts
will begin playing when you play a chord in the accompaniment range of
the keyboard if the ACMP is turned on.

Not all simultaneously played notes sound.

You are probably exceeding the maximum polyphony (page 90) of the
instrument. When the maximum polyphony is exceeded, the earliest
played notes will stop sounding, letting the latest played notes sound.

The footswitch (for sustain) seems to produce the
opposite effect. For example, pressing the footswitch cuts off the sound and releasing it sustains
the sounds.

The polarity of the footswitch is reversed. Make sure that the footswitch
plug is properly connected to the SUSTAIN jack before turning on the
power.

The sound of the Voice changes from note to note.

This is normal. The AWM tone generation method uses multiple recordings (samples) of an instrument across the range of the keyboard; thus,
the actual sound of the Voice may be slightly different from note to note.

The appropriate display does not appear when the
[SONG/AUDIO], [STYLE], or [VOICE] button is
pressed.

Is another display showing? Try pressing the [EXIT] button to return to
the MAIN display, and then pressing one of the mentioned buttons.

The ACMP indicator does not appear when the
[ACMP ON/OFF] button is pressed.

Always press the [STYLE] button first when you are going to use any
Style-related function.

The “Over Current” message is shown in the upper
left area of the MAIN display and the USB device
does not respond.

Communication with the USB device has been shut down because of
the overcurrent to the USB device. Disconnect the device from the USB
TO DEVICE terminal, then turn on the power of the instrument.

The Headphone sound is too low.

Make sure the parameter of “Output Gain” is set to “Headphones” (page
58).

DGX-660 Owner’s Manual

Messages
LCD Message

Comment

Access error!

Indicates the failure in reading or writing from/to the media or the flash memory.

Clearing all memory...

Displayed while erasing all data in the flash memory. Never turn the power off during
data transmission.

Data Error!

Displayed when the Song or Style contains illegal data.

File information area is not large enough.

Indicates that saving data in the media cannot be executed since the total number of
files have become too many.

File is not found.

Indicates there is no file.

File too large. Loading is impossible.

Indicates that loading data cannot be executed since the file data is too large.

Media capacity is full.

Displayed when saving data cannot be executed since the media memory has
become full.

Memory Full

Displayed when the internal memory becomes full during Song recording.

MIDI receive buffer overflow.

Displayed when too much MIDI data was received at one time and failed to proceed.

Over Current

Communication with the USB device has been shut down because of the overcurrent
to the USB device. Disconnect the device from the USB TO DEVICE terminal, then
turn on the power of the instrument.

Save OK ? [YES]/[NO]

Confirms whether saving is executed or not. Press the [+] (YES) button to save the
recorded Song. To cancel saving, press the [-] (NO) button at the prompt.

Save data is not found.

Displayed when the data to be saved doesn’t exist.

Since the media is in use now, this function
is not available.

Indicates that the file control function is currently unavailable since the media is being
accessed.

Since the recorded song has not been
This message appears if you attempt to convert the User Song to audio file when
saved, the operation cannot be performed. there is any recorded Song which is not saved. When this message appears, press
the [EXIT] button to exit from the FILE CONTROL display, then save the recorded
Song which is not saved. To save the Song, hold down the [REC] button until the
save confirmation message appears, then press the [+] (YES) button.
The limit of the media has been reached.

Indicates that saving data cannot be executed since the folder/directory structure has
become too complicated.

The media is not formatted.

Indicates the inserted media has not been formatted.

The media is write-protected.

Indicates that the inserted media cannot be written since it is write-protected. Set to
the write-protect switch to the “overwrite” position before use.

The notation cannot be displayed, since
this song is not allowed to display the
notation.

This message will appear if you attempt to display the score of a Song for which
score display is prohibited.

The song data is too large to be converted
to notation.

Indicates that the score cannot be displayed since the Song data is too large.

This drive is busy now.

This message appears when processing lags behind Audio playback or recording.

This function is not available now.

Indicates the designated function is not available since the instrument is executing
another job.

Appendix

The number of files exceeds the system
Indicates that saving data cannot be executed since the total number of files exceeds
limit. Delete existing files to add new ones. the capacity.

NOTE

• Not all the messages are listed in the table; only messages needing explanation are included.

DGX-660 Owner’s Manual

Specifications
Product Name
Dimensions (W x D x H)
Size/Weight
Weight
Keyboard
Other Controllers
Control
Interface
Display

Panel
Tone Generation
Polyphony
Voices
Preset

Number of Keys
Type
Touch Response
Pitch Bend Wheel
Type
Size
Color
Contrast
Score Display Function
Lyrics Display Function
Language
Language
Piano Sound
Damper Resonance
Number of Polyphony
(max.)
Number of Voices
Featured Voices

Compatibility

Types
Effects

Reverb
Chorus
DSP
Master EQ
Harmony
Intelligent Acoustic Control
(IAC)

Mic Effects
Functions

Preset
Styles
Other Features
Compatibility
Preset
Songs (MIDI)

Appendix

USB Audio
Recorder/Player

Functions

Dual
Split
Panel Sustain
Number of Styles
Fingering
Style Control
Music Database
One Touch Setting (OTS)
Style Recommender
Smart Chord

Number of Preset Songs
Number of Songs
Recording
Number of Tracks
Data Capacity
Compatible Data Playback
Format
Recording
Recording Time (max.)
Playback
Data Format
Recording
Registration
Number of Buttons
Memory
Yamaha Education Suite
Lesson
(Y.E.S.)
Demo
Metronome
Tempo
Overall Controls
Transpose
Tuning
Miscellaneous
Piano Room

DGX-660 Owner’s Manual

Digital Piano
1,397 x 445 x 146 mm (55” x 17-1/2” x 5-3/4”)
with keyboard stand: 1,399 x 445 x 761 mm (55-1/16” x
17-1/2” x 29-15/16”)
21kg (46 lbs. 5 oz.)
with keyboard stand: 28kg (61 lbs. 12 oz.)
88
GHS (Graded Hammer Standard) keyboard
Soft, Medium, Hard, Fixed
Yes
Full Dot LCD
320 x 240 dots
Monochrome
Yes
Yes
Yes
English
English
Pure CF Sound Engine
Yes
192
151 + 15 Drum/SFX Kits + 388 XGlite
1 Natural! Voice, 10 Live! Voices, 11 Sweet! Voices, 7 Cool!
Voices
GM, XGlite
41 types
44 types
237 types
5 types
26 types
Yes
Noise Gate, Compressor, 3 Band EQ
Yes
Yes
Yes (Function Menu)
205
Multi Finger, Full Keyboard, AI Fingered
INTRO, MAIN x 2, FILL-IN x 2, ENDING
320
Yes
Yes
Yes
Style File Format (SFF), Style File Format GE (SFF GE)
100
5
6 (5 Melody + 1 Chord)
Approx. 30,000 notes for 1 user song
SMF (Format 0, Format 1), XF
SMF (Format 0)
80 minutes/Song
WAV (44.1 kHz, 16 bit, stereo)
WAV (44.1 kHz, 16 bit, stereo)
4 (x 8 banks)
Waiting, Your tempo, Minus one, Repeat & Learn, Chord
Dictionary
Yes
Yes
5 - 280
-12 to 0, 0 to +12
415.3 – 440.0 – 466.2 Hz
Yes

Specifications

Storage

Storage and
Connectivity

Amplifiers/
Speakers
Power Supply

Connectivity

Internal Memory
External Drives
DC IN
Headphones/Output
Microphone
Sustain Pedal
AUX IN
PEDAL UNIT
USB TO DEVICE
USB TO HOST

Amplifiers
Speakers
Adaptor
Power Consumption
Auto Power Off

Included Accessories

Approx. 1.7 MB
USB flash drive
12V
x 1 (Standard stereo phone jack)
Yes (Standard phone jack)
Yes
Yes (Stereo mini jack)
Yes
Yes
Yes
6W x 2
12cm x 2 + 5cm x 2
PA-150 or the equivalent
13W
Yes
• Owner’s Manual
• Data List
• Keyboard Stand
• Footswitch
• Music Rest
• AC Power Adaptor (PA-150 or an equivalent recommended
by Yamaha) *1
• Warranty *1
• Online Member Product Registration *2
*1: May not be included depending on your area. Check with your
Yamaha dealer.
*2: The PRODUCT ID on the sheet will be needed when you fill out
the User Registration form.

Separately Sold Accessories
(May not be available depending on your area.)

• AC Power Adaptor: PA-150 or an equivalent recommended
by Yamaha
• Headphones: HPH-50/HPH-100/HPH-150
• Pedal Unit: LP-7A/LP-7AWH
• Foot Pedal: FC3A
• Footswitch: FC4A/FC5
• USB wireless LAN adaptor: UD-WL01
• Wireless MIDI Adaptor: UD-BT01

Appendix

* The contents of this manual apply to the latest specifications as of the printing date. To obtain the latest manual, access the Yamaha website
then download the manual file. Since specifications, equipment or separately sold accessories may not be the same in every locale, please
check with your Yamaha dealer.

DGX-660 Owner’s Manual

Index
Symbols

Functions ......................................72

[-] and [+] buttons ........................ 24

Half Pedal .....................................22
Harmony .......................................31
Headphones ..................................20

Random Playback ........................ 66
Recording (Audio) ...................... 49
Recording (Piano Room) ............ 26
Recording (Song Track) ............. 46
Recording (Song) ........................ 44
Registration Memory .................. 50
Repeat & Learn ........................... 43
Repeat playback .......................... 40
Reverb .......................................... 53
Rewind ......................................... 40
Rhythm ......................................... 32

A-B Repeat ................................... 40
Access Point mode ................ 77, 79
Accessories .................................... 8
ACMP ........................................... 32
Assembly ...................................... 12
Assignable Pedal ......................... 21
Audio ...................................... 38, 66
Audio player ................................ 76
AUDIO SELECT display ........... 39
Auto Accompaniment ................. 32
Auto Accompaniment range ....... 32
Auto Power Off ............................ 19

B
Background music (BGM) ......... 66
Backup .......................................... 52
Bank number ................................ 50
Bell ................................................ 30

I
Infrastructure mode ................77, 78
Initialization .................................52
Intelligent Acoustic Control
(IAC) ...................................19, 59
Intro ...............................................61
iPhone/iPad ...................................77
iPhone/iPad Connection Manual ..8

L
Lesson ...........................................42
Lid position ..................................25
Load ..............................................86
Lyrics ............................................41

CATEGORY buttons ................... 24
Channel ........................................ 68
Character entry ............................ 83
Chord Dictionary ......................... 65
Chord Fingering ..................... 34, 64
Chorus .......................................... 53
Compatible format ....................... 10
Computer ...................................... 76
Computer-related Operations ....... 8
Connection ........... 20, 21, 22, 76, 80
CONTRAST ................................ 23
Convert ......................................... 85

Main ..............................................61
MAIN display ..............................23
Main Voice ...................................27
Master EQ .....................................57
Messages .......................................89
Metronome ...................................29
MIC .........................................21, 71
Microphone ..................................69
MIDI .......................................44, 74
MIDI Reference .............................8
Music Database ............................33
Music Rest ......................................8
Mute ..............................................40

Appendix

Damper Resonance ................ 21, 25
Data List ......................................... 8
Delete (from flash memory) ....... 87
Delete (from USB flash drive) ... 87
Delete (User Song) ...................... 48
Demo ............................................ 38
Dial ............................................... 24
DSP ............................................... 54
Dual Voice .............................. 28, 60

E
Effect ............................................ 74
Ending .......................................... 61
EQ ................................................. 57

F
Fast Forward ................................ 40
File Control .................................. 81
Fill-in ............................................ 61
Footswitch .................................... 21
Formatting (USB flash drive) ..... 82
Function List ................................ 73

DGX-660 Owner’s Manual

Number buttons ............................24

O
Output Gain Level .......................58
Overview Demo ...........................38

P
Panel settings ................................50
Pause .............................................40
Pedal unit ......................................22
Piano Reset ...................................27
Piano Room ..................................25
Pitch ..................................25, 55, 56
PITCH BEND wheel ...................56
Playback .......................................39
Portamento ...................................21
Power On/Off ...............................18
Power requirements .....................18
Practice .........................................42

Q
Quantize ........................................75

S
Save (USB flash drive) ......... 83, 84
Score ............................................. 41
Sections ........................................ 61
Smart Chord ................................. 35
Song ........................................ 38, 66
Song Book ..................................... 8
SONG SELECT display ............. 39
Speaker On/Off ............................ 58
Split Point .............................. 32, 64
Split Voice .............................. 28, 60
Stop Accompaniment .................. 63
Style ........................................ 32, 61
Style Recommender .................... 37
Sustain .................................... 21, 55
Synchro Start ......................... 33, 61
Synchro Stop ............................... 62

T
Tap Start ....................................... 63
Tap Tempo ................................... 21
Tempo ........................................... 63
Time signature ............................. 29
Touch Response ..................... 25, 57
Track On/Off ................................ 40
Transpose ..................................... 55
Troubleshooting ........................... 88
Tuning .................................... 25, 56

U
USB Flash Drive ......................... 80
USER FILES folder ........ 82, 83, 86
User Song ..................................... 44

V
Voice ....................................... 27, 60
Volume (Audio) ........................... 67
Volume (Main Voice,
Dual Voice, Split Voice) .......... 73
Volume (Master) .......................... 19
Volume (Song) ............................. 67
Volume (Style) ............................. 63

W
Wireless LAN .............................. 77
WPS .............................................. 78

IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in
accordance with the following code:
BLUE
: NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured makings identifying the terminals in
your plug proceed as follows:
The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of
the three pin plug.
(2 wires)

OBSERVERA!
Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den
ar ansluten till vägguttaget, även om själva apparaten har stängts av.

ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt,

sålænge netledningen sidder i en stikkontakt, som er tændt — også
selvom der er slukket på apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko
laitetta verkosta.
(standby)

Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not
be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your
national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human
health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or
the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask
for the correct method of disposal.
(weee_eu_en_01)

DGX-660 Owner’s Manual

For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below.

NORTH AMERICA
CANADA

Yamaha Canada Music Ltd.
135 Milner Avenue, Toronto, Ontario M1S 3R1,
Canada
Tel: +1-416-298-1311

U.S.A.

Yamaha Corporation of America
6600 Orangethorpe Avenue, Buena Park, CA 90620,
U.S.A.
Tel: +1-714-522-9011

CENTRAL & SOUTH AMERICA
MEXICO

Yamaha de México, S.A. de C.V.
Av. Insurgentes Sur 1647 Piso 9, Col. San José
Insurgentes, Delegación Benito Juárez, México,
D.F., C.P. 03900
Tel: +52-55-5804-0600

BRAZIL

Yamaha Musical do Brasil Ltda.
Rua Fidêncio Ramos, 302 – Cj 52 e 54 – Torre B –
Vila Olímpia – CEP 04551-010 – São Paulo/SP,
Brazil
Tel: +55-11-3704-1377

ARGENTINA

Yamaha Music Latin America, S.A.,
Sucursal Argentina
Olga Cossettini 1553, Piso 4 Norte,
Madero Este-C1107CEK,
Buenos Aires, Argentina
Tel: +54-11-4119-7000

VENEZUELA

Yamaha Musical de Venezuela, C.A.
AV. Manzanares, C.C. Manzanares Plaza,
Piso 4, Oficina 0401, Baruta, Caracas, Venezuela
Tel: +58-212-943-1877

PANAMA AND OTHER LATIN
AMERICAN COUNTRIES/
CARIBBEAN COUNTRIES

Yamaha Music Latin America, S.A.
Edif. Torre Banco General, F7, Urb. Marbella,
Calle 47 y Aquilino de la Guardia, Panama,
P.O.Box 0823-05863, Panama, Rep.de Panama
Tel: +507-269-5311

EUROPE
THE UNITED KINGDOM/IRELAND
Yamaha Music Europe GmbH (UK)
Sherbourne Drive, Tilbrook, Milton Keynes,
MK7 8BL, U.K.
Tel: +44-1908-366700

GERMANY

Yamaha Music Europe GmbH
Siemensstrasse 22-34, 25462 Rellingen, Germany
Tel: +49-4101-303-0

SWITZERLAND/LIECHTENSTEIN

Yamaha Music Europe GmbH, Rellingen,
Branch Switzerland in Zürich
Seefeldstrasse 94, 8008 Zürich, Switzerland
Tel: +41-44-3878080

AUSTRIA

Yamaha Music Europe GmbH, Branch Austria
Schleiergasse 20, 1100 Wien, Austria
Tel: +43-1-60203900

CZECH REPUBLIC/HUNGARY/
ROMANIA/SLOVAKIA/SLOVENIA

Yamaha Music Europe GmbH, Branch Austria
Schleiergasse 20, 1100 Wien, Austria
Tel: +43-1-60203900

POLAND/LITHUANIA/LATVIA/
ESTONIA

Yamaha Music Europe GmbH
Sp.z o.o. Oddzial w Polsce
ul. Wrotkowa 14, 02-553 Warsaw, Poland
Tel: +48-22-880-08-88

BULGARIA

Dinacord Bulgaria LTD.
Bul.Iskarsko Schose 7 Targowski Zentar Ewropa
1528 Sofia, Bulgaria
Tel: +359-2-978-20-25

MALTA

Olimpus Music Ltd.
Valletta Road, Mosta MST9010, Malta
Tel: +356-2133-2093

NETHERLANDS/BELGIUM/
LUXEMBOURG

Yamaha Music Europe, Branch Benelux
Clarissenhof 5b, 4133 AB Vianen, The Netherlands
Tel: +31-347-358040

FRANCE

Yamaha Music Europe
7 rue Ambroise Croizat, Zone d'activités de Pariest,
77183 Croissy-Beaubourg, France
Tel: +33-1-6461-4000

CYPRUS

Nakas Music Cyprus Ltd.
Nikis Ave 2k
1086 Nicosia
Tel: + 357-22-511080
Major Music Center
21 Ali Riza Ave. Ortakoy
P.O.Box 475 Nicosia, Cyprus
Tel: (392) 227 9213

OTHER COUNTRIES

Yamaha Music Gulf FZE
JAFZA-16, Office 512, P.O.Box 17328,
Jebel Ali FZE, Dubai, UAE
Tel: +971-4-801-1500

ITALY

Yamaha Music Europe GmbH, Branch Italy
Viale Italia 88, 20020, Lainate (Milano), Italy
Tel: +39-02-93577-1

SPAIN/PORTUGAL

Yamaha Music Europe GmbH Ibérica, Sucursal
en España
Ctra. de la Coruna km. 17,200, 28231
Las Rozas de Madrid, Spain
Tel: +34-91-639-88-88

GREECE

Philippos Nakas S.A. The Music House
19th klm. Leof. Lavriou 190 02 Peania – Attiki,
Greece
Tel: +30-210-6686260

SWEDEN

Yamaha Music Europe GmbH Germany filial
Scandinavia
JA Wettergrensgata 1, 400 43 Göteborg, Sweden
Tel: +46-31-89-34-00

DENMARK

Yamaha Music Denmark,
Fillial of Yamaha Music Europe GmbH, Tyskland
Generatorvej 8C, ST. TH., 2860 Søborg, Denmark
Tel: +45-44-92-49-00

FINLAND

F-Musiikki Oy
Antaksentie 4
FI-01510 Vantaa, Finland
Tel: +358 (0)96185111

NORWAY

Yamaha Music Europe GmbH Germany Norwegian Branch
Grini Næringspark 1, 1361 Østerås, Norway
Tel: +47-6716-7800

ICELAND

Hljodfaerahusid Ehf.
Sidumula 20
IS-108 Reykjavik, Iceland
Tel: +354-525-5050

CROATIA

Euro Unit D.O.O.
Slakovec 73
40305 Nedelisce
Tel: +38540829400

RUSSIA

Yamaha Music (Russia) LLC.
Room 37, entrance 7, bld. 7, Kievskaya street,
Moscow, 121059, Russia
Tel: +7-495-626-5005

OTHER EUROPEAN COUNTRIES

Yamaha Music Europe GmbH
Siemensstrasse 22-34, 25462 Rellingen, Germany
Tel: +49-4101-303-0

AFRICA
Yamaha Music Gulf FZE
JAFZA-16, Office 512, P.O.Box 17328,
Jebel Ali FZE, Dubai, UAE
Tel: +971-4-801-1500

MIDDLE EAST
TURKEY

Yamaha Music Europe GmbH
Merkezi Almanya Türkiye İstanbul Şubesi
Maslak Meydan Sodak, Spring Giz Plaza Bagimsiz
Böl. No:3, Sanyer Istanbul, Turkey
Tel: +90-212-999-8010

ASIA
THE PEOPLE’S REPUBLIC OF CHINA

Yamaha Music & Electronics (China) Co., Ltd.
2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,
Shanghai, China
Tel: +86-400-051-7700

HONG KONG

Tom Lee Music Co., Ltd.
11/F., Silvercord Tower 1, 30 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
Tel: +852-2737-7688

INDIA

Yamaha Music India Private Limited
Spazedge Building, Ground Floor, Tower A,
Sector-47, Gurgaon- Sohna Road, Gurgaon-122002,
Haryana, India
Tel: +91-124-485-3300

INDONESIA

PT. Yamaha Musik Indonesia (Distributor)
Yamaha Music Center Bldg. Jalan Jend. Gatot
Subroto Kav. 4, Jakarta 12930, Indonesia
Tel: +62-21-520-2577

KOREA

Yamaha Music Korea Ltd.
8F, Dongsung Bldg. 21, Teheran-ro 87-gil,
Gangnam-gu, Seoul, 135-880, Korea
Tel: +82-2-3467-3300

MALAYSIA

Yamaha Music (Malaysia) Sdn. Bhd.
No.8, Jalan Perbandaran, Kelana Jaya, 47301
Petaling Jaya, Selangor, Malaysia
Tel: +60-3-78030900

SINGAPORE

Yamaha Music (Asia) Private Limited
Block 202 Hougang Street 21, #02-00,
Singapore 530202, Singapore
Tel: +65-6740-9200

TAIWAN

Yamaha Music & Electronics Taiwan Co., Ltd.
2F., No.1, Yuandong Rd. Banqiao Dist.
New Taipei City 22063, Taiwan
Tel: +886-2-7741-8888

THAILAND

Siam Music Yamaha Co., Ltd.
3, 4, 15, 16th Fl., Siam Motors Building,
891/1 Rama 1 Road, Wangmai,
Pathumwan, Bangkok 10330, Thailand
Tel: +66-2215-2622

VIETNAM

Yamaha Music Vietnam Company Limited
15th Floor, Nam A Bank Tower, 201-203 Cach
Mang Thang Tam St., Ward 4, Dist.3,
Ho Chi Minh City, Vietnam
Tel: +84-8-3818-1122

OTHER ASIAN COUNTRIES
http://asia.yamaha.com

OCEANIA
AUSTRALIA

Yamaha Music Australia Pty. Ltd.
Level 1, 99 Queensbridge Street, Southbank,
Vic. 3006, Australia
Tel: +61-3-9693-5111

NEW ZEALAND

Music Works LTD
P.O.BOX 6246 Wellesley, Auckland 4680,
New Zealand
Tel: +64-9-634-0099

COUNTRIES AND TRUST
TERRITORIES IN PACIFIC OCEAN
http://asia.yamaha.com

DMI12

HEAD OFFICE: Yamaha Corporation 10-1, Nakazawa-cho, Naka-ku, Hamamatsu, Japan 430-8650

Yamaha Global Site
http://www.yamaha.com/
Yamaha Downloads
http://download.yamaha.com/

ZS39130

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Author                          : Manual Development Department, Yamaha Corporation
Create Date                     : 2015:10:21 15:40:40+09:00
Modify Date                     : 2016:01:26 17:53:02+09:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:01:26 17:53:02+09:00
Format                          : application/pdf
Title                           : DGX-660 Owner’s Manual
Creator                         : Manual Development Department, Yamaha Corporation
Document ID                     : uuid:deb300b7-7fa4-46c4-8540-5ee241352ff4
Instance ID                     : uuid:d565662e-9ba9-4fad-83f9-351868d8e05d
Page Mode                       : UseOutlines
Page Count                      : 96

EXIF Metadata provided by EXIF.tools

Yamaha DGX 660 Owner’s Manual Owner's Dgx660 En Om A0

Navigation menu

Versions of this User Manual:

Views

Navigation