Yamaha ELS 02/ELS 02C Owner's Manual New Functions (Ver.2.1) Els02 En Om D0

User Manual: Yamaha ELS-02/ELS-02C New functions (Ver.2.1)

Open the PDF directly: View PDF .
Page Count: 212

Download
Open PDF In Browser	View PDF

E L S - 02
E L S - 02 C

Owner’s Manual

DIGITAL ORGAN v2.10

PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.

WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

Power supply/Power cord

If you notice any abnormality
• When one of the following problems occur, immediately turn off the
power switch and disconnect the electric plug from the outlet. Then
have the device inspected by Yamaha service personnel.

• Do not place the power cord near heat sources such as heaters or
radiators. Also, do not excessively bend or otherwise damage the
cord, or place heavy objects on it.
• Only use the voltage specified as correct for the instrument. The
required voltage is printed on the name plate of the instrument.

- The power cord or plug becomes frayed or damaged.

• Check the electric plug periodically and remove any dirt or dust
which may have accumulated on it.

- Some object has been dropped into the instrument.

- It emits unusual smells or smoke.
- There is a sudden loss of sound during use of the instrument.

Do not open
• This instrument contains no user-serviceable parts. Do not open the
instrument or attempt to disassemble or modify the internal
components in any way. If it should appear to be malfunctioning,
discontinue use immediately and have it inspected by qualified
Yamaha service personnel.

Water warning
• Do not expose the instrument to rain, use it near water or in damp or
wet conditions, place on it any containers (such as vases, bottles or
glasses) containing liquids which might spill into any openings. If
any liquid such as water seeps into the instrument, turn off the
power immediately and unplug the power cord from the AC outlet.
Then have the instrument inspected by qualified Yamaha service
personnel.
• Never insert or remove an electric plug with wet hands.

Fire warning
• Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.

DMI-5

ELS-02/ELS-02C Owner’s Manual

1/2

CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:

Power supply/Power cord

Connections

• Do not connect the instrument to an electrical outlet using a
multiple-connector. Doing so can result in lower sound quality, or
possibly cause overheating in the outlet.

• Before connecting the instrument to other electronic components,
turn off the power for all components. Before turning the power on
or off for all components, set all volume levels to minimum.

• When removing the electric plug from the instrument or an outlet,
always hold the plug itself and not the cord. Pulling by the cord can
damage it.

• Be sure to set the volumes of all components at their minimum
levels and gradually raise the volume controls while playing the
instrument to set the desired listening level.

• Remove the electric plug from the outlet when the instrument is not
to be used for extended periods of time, or during electrical storms.

• Only the provided speaker cord should be plugged to the electrical
outlet under the keyboard unit. Do not plug any another cord other
than the speaker cord; doing so can cause malfunction.

Location
• Do not place the instrument in an unstable position where it might
accidentally fall over.
• Do not place the instrument against a wall (allow at least 3 cm/oneinch from the wall), since this can cause inadequate air circulation,
and possibly result in the instrument overheating.
• When transporting or moving the instrument, always use two or
more people. Attempting to lift the instrument by yourself may
damage your back, result in other injury, or cause damage to the
instrument itself.

Handling caution
• Do not insert a finger or hand in any gaps on the key cover or
instrument. Also take care that the key cover does not pinch your
finger.
• Never insert or drop paper, metallic, or other objects into the gaps
on the key cover, panel or keyboard. This could cause physical
injury to you or others, damage to the instrument or other property,
or operational failure.
• Do not rest your weight on, or place heavy objects on the
instrument, and do not use excessive force on the buttons, switches
or connectors.

• Before moving the instrument, remove all connected cables, to
prevent damage to the cables or injury to anyone who might trip
over them.
• When setting up the product, make sure that the AC outlet you are
using is easily accessible. If some trouble or malfunction occurs,
immediately turn off the power switch and disconnect the plug from
the outlet. Even when the power switch is turned off, electricity is
still flowing to the product at the minimum level. When you are not
using the product for a long time, make sure to unplug the power
cord from the wall AC outlet.

• Do not use the instrument/device or headphones for a long period of
time at a high or uncomfortable volume level, since this can cause
permanent hearing loss. If you experience any hearing loss or
ringing in the ears, consult a physician.

Using the bench (If included)
• Do not place the bench in an unstable position where it might
accidentally fall over.
• Do not play carelessly with or stand on the bench. Using it as a tool
or stepladder or for any other purpose might result in accident or
injury.
• Only one person should sit on the bench at a time, in order to
prevent the possibility of accident or injury.
• If the bench screws become loose due to extensive long-term use,
tighten them periodically using the included tool.
• Keep special watch over any small children so that they don’t fall off
the rear of the bench. Since the bench does not have a backrest,
unsupervised use may result in accident or injury.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.

DMI-5

2/2
ELS-02/ELS-02C Owner’s Manual

NOTICE
To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the
notices below.

 Handling and Maintenance
• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices.
Otherwise, the instrument and/or other devices may generate noise. When you use the instrument along with an
application on your iPad, iPhone or iPod touch, we recommend that you set “Airplane Mode” to “ON” on that device in
order to avoid noise caused by communication.
• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a
heater, or in a vehicle during the day) to prevent the possibility of panel disfiguration, damage to the internal
components or unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.)
• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
• When cleaning the instrument, use a soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemicalimpregnated wiping cloths.

 Saving data
• Saved data may be lost due to malfunction or incorrect operation. Save important data to a USB flash drive.
• To protect against data loss through media damage, we recommend that you save important data you’ve created onto
two USB storage devices.

Information
 About copyrights
• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly
prohibited except for your personal use.
• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with
respect to which it has license to use others' copyrights. Such copyrighted materials include, without limitation, all
computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of
such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has
legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.

 About functions/data bundled with the instrument
• Various types/formats of music data can be used with this device, once the data is optimized to the proper format.
However, as a result, this device may not play the music data back precisely as the creators or composers originally
intended.

 About this manual
• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear
somewhat different from those on your instrument.
• Windows is a registered trademark of Microsoft® Corporation in the United States and other countries.
• Apple, iTunes, Mac, Macintosh, iPhone, iPad, iPod touch and Lightning are trademarks of Apple Inc., registered in the
U.S. and other countries.
• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
• Electone and STAGEA are the trademarks of Yamaha Corporation.
• The company names and product names in this manual are the trademarks or registered trademarks of their respective
companies.
• The panel illustrations and LCD screens shown in this owner’s manual are taken from the ELS-02C, Version 2.1x.
• The pan flute and sitar, shown in the displays of the ELS-02/ELS-02C, are on display at the Hamamatsu Museum of
Musical Instruments.
• For an ELS-01 series instrument to which a STAGEA Vitalize unit has been installed, the explanations in this owner's
manual may differ on certain points (such as there not being a USB Dock installed).
The STAGEA Vitalize unit may not be available depending on your particular locale.

ELS-02/ELS-02C Owner’s Manual

Congratulations!
You are the proud owner of a fine electronic organ, the Electone STAGEA ELS-02/ELS-02C.
The Yamaha Electone combines the most advanced tone generation technology with state-of-the-art digital
electronics and features to give you stunning sound quality with maximum musical versatility.
In order to make the most of your Electone and its extensive performance potential, we urge you to read the manual
thoroughly while trying out the various features described.
Keep the manual in a safe place for later reference.

About model names
In this manual, the ELS-02 and ELS-02C are referred to as “ELS-02 series” while the previous models are referred to as
“ELS-01 series.”

About the Manuals
This instrument has the following documents and instructional materials.

Included Documents
Owner’s Manual (this book)
Provides overall explanations of the functions of this instrument.

MIDI Reference
Contains MIDI related information such as MIDI Data Format and the MIDI Implementation Chart.

iPhone/iPad Connection Manual
Explains how to connect this instrument to the iPhone/iPad.
To obtain these manuals, access the Yamaha Downloads. Select your country, enter “ELS-02” to the Model Name box,
then click [SEARCH].

Yamaha Downloads
http://download.yamaha.com/

Accessories
• Bench
• Owner’s Manual
• Online Member Product Registration*
* The PRODUCT ID on the sheet is needed to fill out the User Registration form.

The model number, serial number, power requirements, etc., may be found on
or near the name plate, which is at the bottom of the unit. You should note this
serial number in the space provided below and retain this manual as a
permanent record of your purchase to aid identification in the event of theft.

Model No.
Serial No.
(bottom_en_01)

The name plate is located
on the bottom of the unit.

ELS-02/ELS-02C Owner’s Manual

Main Features
A wide variety of Voices including Super Articulation Voices

pages 34 and 39

• The ELS-02 series features a wide variety of special Super Articulation Voices, which realistically recreate
characteristic instrument sounds, such as the sound of finger slides on guitar and the breath noises of saxophone or
other wind instruments, as well as many of the performance techniques such as legato, vibrato and glissando
necessary for wind instruments.
• The ELS-02 series features a piano Voice created with samples of the Yamaha CFX flagship concert grand piano, as
well as high-quality Voices of strings, orchestra percussion, and ethnic instruments of the world — lending amazing
dynamic realism to your Electone performance.
• The ELS-02C adds to all of that 94 VA (Virtual Acoustic) Voices and a virtually limitless variety of Organ Flute
Voices. The authentic touch response keyboard lets you play these Voices with all the expressiveness and control of
an actual acoustic instrument.

Sophisticated “Registration Menu” which can be called up
any time during your performance

page 19

The five Registration Menu buttons on the front panel feature preset Registrations, allowing you to instantly set up
the Electone for playing your favorite type of music. Moreover, the ELS-02C contains an additional 60 Registrations
that utilize the expressive Custom Keyboard, VA Voices and Organ Flute Voices. The Registrations in the Registration
Menu are divided into basic music categories for ease of selection. Moreover, you can edit any of the Registrations
and customize them to fit your own performance needs.

Dynamic, Contemporary Rhythms and Auto Accompaniment

page 56

The exceptionally of wide selection of various rhythms lets you choose exactly the rhythm you need in your
performance. Each rhythm contains 15 variations (sections) — such as Main, Fill In, Intro, Ending, and Break — that
you can easily switch while you play, to make your performance even more dynamic and professional. Each rhythm
has its own matching accompaniment divided into five instrument parts, providing basic backing as well as
embellishments.

Convenient Edit Functions

pages 50, 81, 95,
and 138

• The Voice Link function lets you collect your favorite Voices to a single display and call them up any time during
your performance.
• The Registration Memory function lets you memorize your favorite settings for easy recall whenever they’re
needed. Up to 80 Registrations (5 Banks of 16 Registrations each) can be stored.
• The Voice Edit function lets you create up to 80 original Voices as User Voices. From a wide variety of more than
300 Effect Types divided into 16 categories, two Effect Types can be assigned to each Voice Section, giving you even
more tools to enhance, transform and customize the Voices.
• The Keyboard Percussion feature allows for flexible and detailed editing, letting you assign your desired percussion
sound to each note of the keyboard to create your own original drum kit.
• Comprehensive data compatibility lets you use data created on ELS-01 series instruments with the new ELS-02
series. For ease of use, the ELS-02 series features the same familiar operations as that of the ELS-01 series, since the
layout of the panel buttons is identical.

ELS-02/ELS-02C Owner’s Manual

Large, 7.0-inch TFT-LCD with Intuitive Touch Panel Operation

page 14

This large LCD display not only lets you clearly see a wide selection of settings and parameters at almost any angle, it
also serves as a touch control panel — letting you intuitively make selections and adjust settings simply by touching
the screen! Once you touch a setting, you can even adjust it in finer detail if necessary with the Data Control dial.

Audio Recording

page 132

You can record your performances as audio data (.WAV) to a USB flash drive. Since the data is saved in stereo WAV
format of normal CD quality resolution (44.1kHz/16bit), it can be transmitted to and played on portable music
players by using a computer, allowing you to share your recordings with your friends, and make your own CDs to
enjoy as well.

The ELS-02/ELS-02C is compatible with the following formats.
GM (General MIDI) is one of the most common Voice allocation formats. GM System Level 2 is a
standard specification that enhances the original GM and improves Song data compatibility.
It provides for increased polyphony, greater Voice selection, expanded Voice parameters, and
integrated effect processing.
XG is a major enhancement of the GM System Level 1 format, and was developed by Yamaha
specifically to provide more Voices and variations, as well as greater expressive control over Voices and
effects, and to ensure compatibility of data well into the future.
The Yamaha XF format enhances the SMF (Standard MIDI File) standard with greater functionality
and open-ended expandability for the future. This instrument is capable of displaying lyrics when an
XF file containing lyric data is played.
GS was developed by the Roland Corporation. In the same way as Yamaha XG, GS is a major
enhancement of the GM specifically to provide more Voices and Drum kits and their variations, as well
as greater expressive control over Voices and effects.
The Style File Format combines all of Yamaha’s auto accompaniment know-how into a single unified
format.
“AEM” is the trademark of Yamaha’s leading-edge tone generation technology. For information on
AEM, refer to the Reference Manual on the website.

• The bitmap fonts used in this instrument have been provided by and are the property of Ricoh Co., Ltd.

ELS-02/ELS-02C Owner’s Manual

Contents
PRECAUTIONS ........................................................................... 2

5. Rhythm/Keyboard Percussion

About the Manuals...................................................................... 5
Accessories ................................................................................ 5
Main Features ............................................................................. 6

Panel Layout

Front Panel................................................................................ 10
LCD Display/Display Select...................................................... 12
Overview ................................................................................... 12

1. Quick Introductory Guide

Getting Started.......................................................................... 13
Using the LCD Display ............................................................. 14
Changing the display page................................................ 14
Using the display buttons................................................... 14
Adjusting parameter values by using the display sliders .. 15
LCD Display Settings................................................................ 16
Selecting the display language.......................................... 16
Muting the touch panel sound............................................ 16
Adjusting the display brightness ........................................ 17
Voice Display ............................................................................ 17
Registration Menu..................................................................... 19
Selecting Registrations from the Registration Menu .......... 19
Registration Menu list ......................................................... 20
Confirming the Electone Version .............................................. 23
Factory Set (Initializing the Electone) ....................................... 23

2. Voices

Voices for Each Keyboard ........................................................ 24
Selecting Voices with the Voice Buttons................................... 25
Registering a Voice to Voice Link....................................... 25
Changing the Voice volume ............................................... 26
Selecting Voices from the User Buttons ................................... 28
Voice List .................................................................................. 29
Tone Generators of the ELS-02 Series ..................................... 39
AWM Tone Generator......................................................... 39
VA Voices ........................................................................... 39

3. Organ Flutes (ELS-02C)

4. Voice Controls and Effects

Settings Selected from the Voice Condition Display ................ 43
Selecting from the Panel........................................................... 46
Reverb ................................................................................ 46
Sustain................................................................................ 48
Brilliance............................................................................. 48
Rotary Speaker................................................................... 49
Using Voice Link ....................................................................... 50
Registering a Voice with the settings on the Voice Condition
display to Voice Link .......................................................... 50
Selecting a Voice registered to Voice Link......................... 50
Editing the Voice registered to Voice Link ......................... 51
Releasing the current Voice settings from Voice Link ........ 51
Registering a Voice to Voice Link with a different
Voice name......................................................................... 52
Deleting a Voice from Voice Link ....................................... 52
Effect List .................................................................................. 54

ELS-02/ELS-02C Owner’s Manual

Selecting Rhythms with the Rhythm Buttons.............................56
Selecting a rhythm ..............................................................56
Operating the rhythm from the panel..................................57
Changing the rhythm volume..............................................59
Adjusting the tempo............................................................59
Changing the rhythm reverb ...............................................60
Selecting Rhythms from the User Buttons.................................60
Rhythm List................................................................................61
Accompaniment ........................................................................65
Automatic Accompaniment – Auto Bass Chord (A.B.C.) ..........66
Melody On Chord (M.O.C.) .......................................................67
Keyboard Percussion ................................................................68
Using the Preset Keyboard Percussion ..............................68
Preset Keyboard Percussion List........................................70
Creating a User Keyboard Percussion Kit ..........................81
Copying the Keyboard Percussion settings .......................83
Detailed settings for each percussion instrument ..............83
Kit Assign list.......................................................................85

6. Registration Memory

Storing Registrations .................................................................95
Storing Registrations to Another Bank ......................................96
Selecting Registrations..............................................................96
Saving the Registration Data to USB Flash Drive......................97
Initializing Registration Memory ................................................98
Registration Shift .......................................................................99
Setting the Registration Shift mode in
the Regist Shift display .......................................................99
Confirming the Registration Shift setting in
the Voice Display ..............................................................101
Unifying Values/Settings of a Specific Parameter ...................102
Copying Registrations .............................................................104

7. Music Data Recorder (MDR)

106

Calling Up the MDR Display....................................................106
Using the MDR Display ...........................................................106
Song icons ........................................................................108
Precautions when using the [USB TO DEVICE] terminal..110
Using USB flash drives .....................................................110
Formatting a USB Flash Drive .................................................111
Selecting a Song .....................................................................112
Searching for a Song ........................................................112
Recording................................................................................114
Recording your performance............................................114
Re-recording (Retry) .........................................................114
Recording specified parts only.........................................115
Punch-in recording ...........................................................116
Changing the Song Name.......................................................116
Saving Registrations and Other Data to a Unit .......................118
Creating two or more Registration Units in a Song...........118
Overwriting Registration data to a Unit .............................118
Changing the order of the Registration Units ...................119
Recalling Recorded Registrations...........................................120
Playing Back a Song ...............................................................121
Playing back the selected part(s) .....................................122
Fast forward, Rewind and Pause ......................................122
Changing the tempo .........................................................123
Repeat playback...............................................................123

Displaying the Score............................................................... 124
Changing the score contents and settings ...................... 125
Other Functions (Tools) .......................................................... 126
Song copy ........................................................................ 126
Song delete ...................................................................... 128
Converting to XG .............................................................. 129
Converting ELS format to EL ............................................ 130
Converting EL format to ELS ............................................ 131
Checking the remaining memory ..................................... 131

8. Audio

132

Recording Your Performance as Audio .................................. 132
Playing Back Audio Files ........................................................ 134
Rewind, Fast Forward and Pause .................................... 135
Changing the Volume, Tempo and Pitch ......................... 136
Repeat playback .............................................................. 136
Other Functions (Tools) .......................................................... 137
Creating a New Folder/Deleting the File/
Changing the File Name................................................... 137
Audio file copy.................................................................. 137

9. Voice Edit

138

Voice Structure ....................................................................... 138
AWM Voice structure........................................................ 138
VA Voice structure............................................................ 138
Editing a Voice........................................................................ 139
Selecting a Voice for editing ............................................ 139
Editing an AWM Voice...................................................... 140
Editing a VA Voice (ELS-02C only)................................... 143
Saving the Edited Voice.......................................................... 144
Quitting Voice Edit .................................................................. 145
Recalling an Edited Voice....................................................... 145

10. Rhythm Program

146

Outline of the Rhythm Programming Operation...................... 146
Rhythm Pattern Program......................................................... 146
Entering the Rhythm Pattern Program .............................. 146
Basic settings for the rhythm pattern ............................... 148
Entering percussion sounds to a rhythm pattern
— Step Write .................................................................... 151
Editing entered percussion notes .................................... 152
Entering percussion sounds to a rhythm pattern
— Real Time Write............................................................ 155
Creating backing patterns (Rhythmic Chord function) .... 156
Changing the Voices for Accompaniment parts .............. 158
Adjusting volume and panning ........................................ 159
Effect settings................................................................... 159
Detailed settings for each percussion instrument............ 160
Saving rhythm patterns .................................................... 161
Quitting the Rhythm Pattern Program............................... 162
Recalling User rhythm patterns ........................................ 163
Selecting rhythms from a USB flash drive ........................ 163
Percussion Kit list ............................................................. 164
Rhythm Sequence Program.................................................... 172
Selecting a sequence....................................................... 172
Programming a sequence................................................ 173
Auditioning a sequence ................................................... 173
Editing an existing Rhythm Sequence ............................. 174
Programming a Registration Sequence ........................... 174
Editing an existing Registration Sequence ...................... 175
Quitting the Rhythm Sequence Program.......................... 176
Playing Rhythm Sequences ............................................. 176
Playing all sequences in order ......................................... 176
Copying a Rhythm Sequence .......................................... 177

Saving Rhythm Pattern and Rhythm Sequence Data
to a USB Flash Drive ...............................................................177

11. Footswitches, Knee Lever and
Expression Pedals

178

Footswitches............................................................................178
Controlling the Rhythm......................................................179
Controlling Glide ...............................................................179
Controlling Rotary Speaker ...............................................180
Calling up another page of the music score.....................180
Controlling the Super Articulation Voices .........................180
Knee Lever ..............................................................................180
Controlling Sustain ............................................................180
Controlling Melody On Chord ...........................................181
Controlling Lead Slide.......................................................182
Controlling the Solo function .............................................182
Expression Pedals...................................................................182
Controlling Pitch Bend ......................................................183
Controlling the Rhythm Tempo .........................................183

12. Transpose and Pitch Controls

184

13. Connections

185

Accessory Jacks and Controls................................................185
Connection Examples – External Devices...............................187
Using headphones............................................................187
Playing the sounds of the Electone through
an external audio system ..................................................187
Recording the sounds of the Electone to
an external recorder..........................................................188
Outputting the sound of an external device through
the built-in speakers of the Electone.................................189
Connecting a microphone or guitar ..................................189
Controlling external MIDI devices from the Electone........190
Controlling the Electone from an external device .............190
Connection with Computer......................................................191
Connecting to a Computer ([USB TO HOST] terminal) ....191
Connecting to a Computer (MIDI terminal).......................191
MIDI Control ............................................................................192
Connecting to an iPhone/iPad.................................................193
Wireless LAN settings .......................................................193
Wireless LAN Detailed Settings ........................................198
Initialize the wireless LAN settings....................................200
Glossary of Terms .............................................................200

14. Appendix

201

Troubleshooting.......................................................................201
Specifications ..........................................................................204
Index .......................................................................................206

ELS-02/ELS-02C Owner’s Manual

Panel Layout
Front Panel
The panel illustrations shown are taken from the ELS-02C.
LOWER KEYBOARD VOICE 1, 2
(page 24)

REVERB buttons
(page 46)

UPPER KEYBOARD VOICE 1, 2
(page 24)

UPPER KEYBOARD VOICE 1

REVERB

BRILLIANCE

MAX

BRILLIANT

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

UPPER KEYBOARD VOICE 2

VOLUME

BRILLIANCE

MAX

BRILLIANT

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

VOLUME
MAX

Monitor speaker
MIN

SUSTAIN buttons
(page 48)

MELLOW

LOWER KEYBOARD VOICE 1

SUSTAIN

BRILLIANCE
BRILLIANT

UPPER
(KNEE)

LOWER
(KNEE)

PEDAL

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

2
MELLOW

REGISTRATION MENU
(page 19)

KEYBOARD
PERCUSSION

SEQ.

MIN

MELLOW

LOWER KEYBOARD VOICE 2

VOLUME

BRILLIANCE

MAX

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

MIN

VOLUME

BRILLIANT

MAX

MELLOW

MIN

REGISTRATION MENU

RHYTHM

VOLUME
MAX

MARCH

WALTZ

SWING&
JAZZ

POPS

R&B

LATIN

WORLD
MUSIC

BALLAD

ROCK

DANCE

2
MIN

TEMPO

RHYTHM/
KEYBOARD PERCUSSION
(page 56)

BAR / BEAT

TEMPO

INTRO

SYNCHRO
START

RHYTHM
CONTROL

ENDING

START

BREAK

MAIN / FILL IN

[M.] (Memory) button
(page 95)

ELS-02/ELS-02C Owner’s Manual

Registration memory
(page 95)

LCD display/
DISPLAY SELECT
(page 12)

PEDAL VOICE 1, 2
(page 25)

DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

LEAD VOICE 1

UTILITY

BRILLIANCE
BRILLIANT

MDR
VIOLIN

FOOT
SWITCH

LEAD VOICE 1, 2
(page 24)

AUDIO

FLUTE

SYNTH

TRUMPET

DATA CONTROL

BRILLIANCE

MAX

TO
LOWER

MELLOW

LEAD VOICE 2

VOLUME

ACOUSTIC

VIRTUAL

ELECTRONIC

CUSTOM

VOLUME

BRILLIANT

MAX

MELLOW

MIN

Monitor speaker

SOLO
(KNEE)

MIN

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

PEDAL VOICE 1

BRILLIANCE
BRILLIANT

U.ORGAN
FLUTES

CONTRA
BASS

ELEC.
BASS

TIMPANI

SYNTH
BASS

TO
LOWER

PEDAL VOICE 2

VOLUME

BRILLIANCE

MAX

CONTRA
BASS

ELEC.
BASS

TIMPANI

SYNTH
BASS

TO
LOWER

VOLUME

BRILLIANT

MAX

MELLOW

MIN

L.ORGAN ROTARY SP
SPEED
FLUTES

MELLOW

MIN

MASTER VOLUME dial
(page 13)
MASTER VOLUME

[P] Power switch
(page 13)

[D.] (Disable) button
(page 96)

ELS-02/ELS-02C Owner’s Manual

LCD Display/Display Select
DISPLAY SELECT
VOICE
DISPLAY

3
FOOT
SWITCH

A.B.C.
M.O.C.

MDR

UTILITY

AUDIO

DATA CONTROL
RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

9
U.ORGAN
FLUTES

LCD display (touch panel).................... page 14
DATA CONTROL dial........................... page 15
[VOICE DISPLAY] button ...................... page 17
[A.B.C./M.O.C.] button ................. pages 66, 67
[MDR] button..................................page 106
[FOOT SWITCH] button ................pages 99, 178
[UTILITY] button ........... pages 16, 182, 184, 192
[AUDIO] button................................page 132

L.ORGAN ROTARY SP
SPEED
FLUTES

1
2
3
4
5
6
7
8

)

9
)
!
@
#
$

[VOICE EDIT] button ......................... page 138
[PATTERN] button ............................ page 146
[SEQUENCE] button .......................... page 172
[U. ORGAN FLUTES] button...................page 40
[L. ORGAN FLUTES] button ...................page 40
[ROTARY SP SPEED] button ..................page 49

Overview
Key cover/Music rest
Front Panel (page 10)
Upper keyboard
Lower keyboard
USB/MIDI terminals (page 186)
Knee lever (page 180)
Speaker
I/O connectors
(page 185)
USB Dock
(page 186)

Speaker switch (page 13)
Right footswitch (page 99)
Left footswitch (page 178)
Expression pedal (page 13)
Second expression pedal
(ELS-02C); (page 182)
Pedalboard

NOTE
An ELS-01 series instrument with an installed STAGEA Vitalize unit has only two [USB TO DEVICE] terminals installed on the right side.
The USB Dock is not installed.

ELS-02/ELS-02C Owner’s Manual

1 Quick Introductory Guide
Whether you are an advanced performer or have never touched an electronic keyboard in your life, we
recommend that you take the time to go through this basic section. It shows you in the simplest possible
manner how to start playing your Electone.

Getting Started
1

Press the [P] Power switch located on
the right of the keyboard to turn the
power on.

Plug the power cord into an appropriate
electrical outlet.
CAUTION

Only use the voltage specified as correct for the
Electone. The required voltage is printed on the
name plate of the Electone. Yamaha products are
manufactured specifically for the supply voltage in
the area where they are to be sold. If you intend to
use the instrument in another location, or if any
doubt exists about the supply voltage, please
consult with a qualified technician.

Make sure that the speaker switch
(page 12) is set to on.

To turn off the Electone, press the [P] Power switch
again.
CAUTION
Even when the power switch is turned off, electricity is
still flowing to the instrument at the minimum level.
When you are not using the instrument for a long time,
make sure you unplug the power cable from the wall
AC outlet.

Set the MASTER VOLUME control.
The MASTER VOLUME control is an overall
control that affects the volume of the entire
instrument.

REAR SPEAKER
OFF
ON

Decreasing
the volume

If you are using the ELS-02C, also set the REAR
SPEAKER switch to on (not available on the ELS02).

Increasing
the volume

MASTER VOLUME

NOTE
• When using the rear speaker, place the Electone against
a wall, allowing about 20 cm from the wall for optimum
sound.
• You do not need to switch the power of the speaker on/
off whenever you use the instrument. If you want, you
can always keep it on and turn the power on and off by
pressing the main power switch of the instrument.
• For an ELS-01/ELS-01U instrument with an installed
STAGEA Vitalize unit, the SPEAKER switch cannot be
used.

Press the Expression pedal down with
your foot.

Maximum
volume

Minimum
volume

ELS-02/ELS-02C Owner’s Manual

Using the LCD Display

Using the LCD Display
This instrument features a special touch panel that allows
you to change the parameters by simply touching the
‘virtual’ buttons or sliders on the display. (Please note that
two or more parameters cannot be operated
simultaneously.)
You can also use the Data Control dial (page 12) to make
fine changes to the parameter value shown in the display.
NOTE
When cleaning the display, use a soft, dry cloth.

Using the display buttons
There are three types of display buttons: those that select
a function, those that switch a function on/off, and those
that open a list or menu of parameters. To select the
desired function, simply press the button in the display
directly.
To switch a function on/off or open a parameter list, see
the instructions below.

To switch the function on or off:
On

NOTICE
Do not use any sharp or hard tools to operate the touch
panel. Doing so may damage the display.

Changing the display page
There are some oval-shaped numbered buttons at the top
right of the display. Pressing these buttons changes the
“page” of the display. The button of the selected page is
highlighted in orange.
Page 1
Off, or muted (button is grayed out)

Page 2

Press this button
to select Page 1

You can independently mute each Voice section in the
Voice Display, each accompaniment part in Rhythm
Menu display, and each Element in the Voice Edit display.

Press this button
to select Page 2

ELS-02/ELS-02C Owner’s Manual

Press this button
to select Page 3

Using the LCD Display

To open the parameter list:

Touching the display slider directly:

Quick Introductory Guide

To change a display slider value, press the desired point in
the slider. The slider moves to the point that is pressed.
You can also change the parameter value by sliding your
finger up or down while holding down on the display
slider.

Slider will move to the point you touch

When you press a button, a parameter list will appear in
which you can select the desired parameter. When you
select items in the display, the list closes automatically.
You can also close the list by pressing the [CLOSE] button
at the top right of the list.

Slider will follow your finger

Using the Data Control dial:
To change the parameter value:
To make coarse changes to the value, use the []/[]
buttons. For fine adjustment, use the Data Control dial.

Touch on/above the slider in the display to enable the
parameter and set a rough value, then turn the Data
Control dial.
Touch here to enable the parameter

DATA CONTROL

Adjusting parameter values by
using the display sliders
You can adjust some parameters such as Volume, Reverb,
Pan and so on, by using the ‘virtual’ sliders in the display.
There are two ways to move the slider in the display:
touching it directly, and using the Data Control dial. We
suggest that you touch the display slider when making
coarse adjustments and use the Data Control dial for fine
adjustment.

Blue mark

To control Pan, you can move the horizontal slider in the
same way as vertical sliders.
DATA CONTROL

ELS-02/ELS-02C Owner’s Manual

LCD Display Settings

Here you can change the display settings: displayed
language (English or Japanese), touch panel sound, and
display brightness.

Press the desired button,
(Japanese) or [English].
LANGUAGE

Selecting the display language
The LCD display can be shown in two languages, English
and Japanese. The default setting is English.

Press the [UTILITY] button to call up the
GLOBAL Page of the Utility display.
DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

Muting the touch panel sound
By default, the Electone is set with the touch panel sound
turned on, giving you audio feedback when you press a
button or control. If you want to mute the touch panel
sound, follow the procedure below.

1
2

Press the [UTILITY] button to call up
GLOBAL Page of the Utility display.
Press the [OFF] button of the TOUCH
PANEL SOUND to mute the sound.
TOUCH PANEL SOUND

NOTE
The settings in the Utility display are automatically saved
when another display is called up.

To turn the sound on again, select [ON] in step 2.

ELS-02/ELS-02C Owner’s Manual

Voice Display

You can adjust the display brightness to a comfortable,
easy-to-read level.

Voice Display
You can visually confirm the currently assigned Voices to
each keyboard, currently selected rhythm, Registration
Shift, and so on, in the Voice Display.

Press the [UTILITY] button to call up the
GLOBAL Page of the Utility display.

How to call up the Voice Display:

Move the LCD BRIGHTNESS slider by
touching it directly or using the Data
Control dial.
Higher settings make the display brighter and lower
settings make it darker.

Quick Introductory Guide

Adjusting the display brightness

The Voice Display always appears when the Electone is
turned on. To call up the Voice Display from any other
display, press the [VOICE DISPLAY] button.
DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

Reference page
• Touching the display slider directly (page 15)

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

LCD BRIGHTNESS

The Voice Display consists of three different pages that
can be switched by pressing the [1], [2], or [3] button at
the top right of the display.

ELS-02/ELS-02C Owner’s Manual

Voice Display

7 Registration Bank Selection

Voice Display [Page 1]
Switching the display pages

1
8
7

2
3

For selecting the desired Registration Bank. You can
select the Banks from A (at top) to an empty Bank next to
the last Bank containing data. When Banks A and B
contain Registration data, for example, you can select
Banks A, B, and C (which is empty). The on/off
indication of Bank (A – E) shows whether the selected
Bank contains data or not.
Reference pages
• Registration Memory and Bank (page 95)
• Storing Registrations to Another Bank (page 96)

1 Voice Sections
Shows the Voices currently assigned to each Voice
section. You can also mute a specific Voice section by
pressing its button (the button is grayed-out).

8 Registration Shift
Shows the current position of the Registration Shift.
Reference page
• Registration Shift (page 99)

Voice Display [Page 2]

Reference page
• Selecting a Voice (page 25)

2 RHYTHM
Shows the currently selected rhythm.
Reference page
• Selecting a rhythm (page 56)

3 A.B.C. MODE
Shows the Auto Bass Chord mode.
Reference page
• Auto Bass Chord (page 66)

4 TEMPO
Shows the current rhythm tempo.
Reference page
• Adjusting the tempo (page 59)

You can confirm the parameter values (for example,
Reverb, Volume, Pan) for each Registration Memory
simultaneously. Moreover, you can unify the values of a
specific parameter used in various Registration Memories
at one time. See page 102 for the details.

Voice Display [Page 3]

5 BAR/BEAT
Shows the bar/beat when the rhythm is playing.

6 Registration Unit
Shows the currently selected Registration Unit.
Reference pages
• About Banks and Units (page 98)
• Creating two or more Registration Units in a Song (page 118)

The Registrations stored to the Registration number can
be copied to another Registration number for each
individual section. Also Banks can be copied or deleted.
For details, see page 105.
Reference page
• Registration Memory (page 95)

ELS-02/ELS-02C Owner’s Manual

Registration Menu

Change the display pages here.

Quick Introductory Guide

Registration Menu

A “Registration” consists of panel settings including the
selected Upper Keyboard Voices, Lower Keyboard Voices,
Pedal Voices, rhythm and so on. Each Registration Menu
button (1 – 5) includes each different music styles of the
Registrations. Use each button properly in accordance
with the music styles you want to perform.
NOTE
Additional basic Registrations are preset on the Registration
Memory locations from 1 to 16. See page 95 for details.

The color of the selected Registration name changes
to orange, indicating that it has been selected, and
the Auto Bass Chord mode is shown at the bottom
of the display.

Selecting Registrations from the
Registration Menu

Reference page
• Auto Bass Chord (page 66)

Press one of the REGISTRATION MENU
buttons.

Play your favorite Song with the
selected Registration.

Each button has different Registrations for different
music genres. For example, if you want to play Jazz,
press the [4] button. For details on the Registration
Menu, see page 20.
REGISTRATION MENU

01 Kids / 02 Simple

01, 02 Pops & Rock

01, 02 Dance & Ballad

01, 02 Jazz & Latin

01, 02 Symphony & World

Select the desired Registration by
pressing the appropriate button on the
display.
Each of the REGISTRATION MENU buttons
features two tabs on the display: [01] and [02] which
calls up two pages alternatively. [01] features the
same Registration Menu as that of the ELS-01 series.
On each of [01] page and [02] page, press any of the
number buttons [1] – [5] then select the desired
Registration.

ELS-02/ELS-02C Owner’s Manual

Registration Menu

Registration Menu list
REGISTRATION MENU 01
Page
1

5
(ELS-02C)

REGISTRATION MENU 1
01 KIDS

REGISTRATION MENU 2
01 POPS & ROCK

REGISTRATION MENU 3
01 DANCE & BALLAD

REGISTRATION MENU 4
01 JAZZ & LATIN

REGISTRATION MENU 5
01 SYMPHONY & WORLD

Simple 8Beat 1

Dynamic 8Beat

Organ Ballad

Blow On Sax

Fanfare

Simple 8Beat 2

NY Ballad

Dramatic Ballad

Sax Ensemble

String Orchestra

Light Step

British Pop

Love Ballad

Moonlight

Romantic Violin

Sunny Pop

8Beat Modern

Smooth Lead

Big Band

Baroque

Kids March 1

Rock Band

Pop Ballad

Clarinet Swing

Flute & Harp

Kids March 2

Detroit Pop

Guitar Ballad

Jazz Combo

Serenade

Kids March 3

Techno Pop

Acoustic Ballad

Medium Jazz

Fast March

Synth Rock

Sheriff Reggae

Healing Guitar

Organ Session

Wild West

SymphonicMarch 1

Rock & Roll

Chillout

Guitar Combo

Vienna Waltz

SymphonicMarch 2

Power Rock

Sweetheart 1

Tender Ballad

Polka

Bluegrass

60s Guitar Rock

Sweetheart 2

Jazz Waltz

Chanson Club

Sea Carnival

Unplugged

Slow & Easy

Five-Four

Theatre Organ

Basic Waltz

Motor City

Euro Trance

Big Band Samba

Flamenco

Brass Ensemble

Lovely Shuffle

6/8 Trance

Mambo Brass

Pop Flamenco

Pure Waltz

Gospel Shuffle

Cool Hip Hop

Mambo Tenor

Mexican Dance

Rococo Ensemble

Joyful Gospel

Latin House

Montuno

Mariachi

Pop Cha Cha

Frankly Soul

Dance Beat

Bossa Nova

Celtic Dance

Comical Rumba

Soul

Euro Dance Pop

Pop Bossa

Folk Step

Comical Samba

Gospel

UK Pop

Sweet Rumba

Italiano

Toy Orchestra

6/8 Soul

Jive

Beguine

Musette

Charleston

Hit Pop

Disco Queen

Cha Cha Cha

Country

Winter Swing

New Country

Disco Soul

Mellow Groove

Hawaiian

Snow Waltz 1

Eternal Pop

Pop Disco

Modern R&B

Chinese Nocturne
Japanese Sound

Snow Waltz 2

Ground Beat

Hot Disco

Dixieland Jazz

Alpine Polka *A

Bounce Pop *A

Ibiza *A

Jungle Drum *A

OrchestraMarch*A

Alpine Polka *B

Bounce Pop *B

Ibiza *B

Jungle Drum *B

OrchestraMarch*B

Alpine Polka *C

Bounce Pop *C

Ibiza *C

Jungle Drum *C

OrchestraMarch*C

Alpine Polka *D

Bounce Pop *D

Ibiza *D

Jungle Drum *D

OrchestraMarch*D

Dream Ballad *A

Blues Jam *A

Power House *A

Jazz Club *A

Pasodoble *A

Dream Ballad *B

Blues Jam *B

Power House *B

Jazz Club *B

Pasodoble *B

Dream Ballad *C

Blues Jam *C

Power House *C

Jazz Club *C

Pasodoble *C

Dream Ballad *D

Blues Jam *D

Power House *D

Jazz Club *D

Pasodoble *D

Pops Orchestra*A

EvergreenWaltz*A

Dance Latino *A

Afro Session *A

Tango *A

Pops Orchestra*B

EvergreenWaltz*B

Dance Latino *B

Afro Session *B

Tango *B

Pops Orchestra*C

EvergreenWaltz*C

Dance Latino *C

Afro Session *C

Tango *C

Pops Orchestra*D

EvergreenWaltz*D

Dance Latino *D

Afro Session *D

Tango *D

Kids On Stage *A

16Beat Pop *A

Twilight Disco*A

ChaCha Grandee*A

Show Time *A

Kids On Stage *B

16Beat Pop *B

Twilight Disco*B

ChaCha Grandee*B

Show Time *B

Kids On Stage *C

16Beat Pop *C

Twilight Disco*C

ChaCha Grandee*C

Show Time *C

Kids On Stage *D

16Beat Pop *D

Twilight Disco*D

ChaCha Grandee*D

Show Time *D

Galaxy March *A

Top Gear Rock *A

Love Song *A

3/4 Fast Jazz *A

Majestic Sound*A

Galaxy March *B

Top Gear Rock *B

Love Song *B

3/4 Fast Jazz *B

Majestic Sound*B

Galaxy March *C

Top Gear Rock *C

Love Song *C

3/4 Fast Jazz *C

Majestic Sound*C

Galaxy March *D

Top Gear Rock *D

Love Song *D

3/4 Fast Jazz *D

Majestic Sound*D

SE *A

Southern Pop *A

Movie Ballad *A

Twilight Sax *A

OrchestraSwing*A

SE *B

Southern Pop *B

Movie Ballad *B

Twilight Sax *B

OrchestraSwing*B

SE *C

Southern Pop *C

Movie Ballad *C

Twilight Sax *C

OrchestraSwing*C

SE *D

Southern Pop *D

Movie Ballad *D

Twilight Sax *D

OrchestraSwing*D

Bright 16Beat *A

Funk *A

Hip Hop Pop *A

Organ Bossa *A

Orchestra 3001*A

Bright 16Beat *B

Funk *B

Hip Hop Pop *B

Organ Bossa *B

Orchestra 3001*B

Bright 16Beat *C

Funk *C

Hip Hop Pop *C

Organ Bossa *C

Orchestra 3001*C

Bright 16Beat *D

Funk *D

Hip Hop Pop *D

Organ Bossa *D

Orchestra 3001*D

Movie Panther *A

WestCoast Rock*A

Fusion Shuffle*A

Afro Cuban *A

Wedding Song *A

Movie Panther *B

WestCoast Rock*B

Fusion Shuffle*B

Afro Cuban *B

Wedding Song *B

Movie Panther *C

WestCoast Rock*C

Fusion Shuffle*C

Afro Cuban *C

Wedding Song *C

Movie Panther *D

WestCoast Rock*D

Fusion Shuffle*D

Afro Cuban *D

Wedding Song *D

Powerful Swing*A

6/8 Enka *A

Whole Ballad *A

Midnight Jazz *A

Fantasy *A

Powerful Swing*B

6/8 Enka *B

Whole Ballad *B

Midnight Jazz *B

Fantasy *B

Powerful Swing*C

6/8 Enka *C

Whole Ballad *C

Midnight Jazz *C

Fantasy *C

Powerful Swing*D

6/8 Enka *D

Whole Ballad *D

Midnight Jazz *D

Fantasy *D

ELS-02/ELS-02C Owner’s Manual

Registration Menu

REGISTRATION MENU 02

REGISTRATION MENU 1
02 SIMPLE

REGISTRATION MENU 2
02 POPS & ROCK

REGISTRATION MENU 3
02 DANCE & BALLAD

REGISTRATION MENU 4
02 JAZZ & LATIN

REGISTRATION MENU 5
02 SYMPHONY & WORLD

SimpleReg Strs 1

70s Easy Pop

R&B Pop Ballad

Big Band Tutti

Orch Full Unit

SimpleReg Strs 2

BoysGuitarBallad

R&B Soul Ballad

Alto Sax Combo

String Classic

SimpleReg Orch 1

Soul Pop

R&B Cool Ballad

Jazz Combo Fast

Sweet Pizzicato

SimpleReg Orch 2

70s Top Duo

Cool AC

Jazz Combo 66

Baroque Symphony

SimpleReg Orch 3

Daydream Shuffle

Sweet Chart Hits

The Big Band *A

Nostalgic Green

SimpleReg Pops 1

Oldies Pop

SweetSlowBallad

The Big Band *B

New Year March

SimpleReg Pops 2

EuroPopFolklore

YourPiano Ballad

GuitarJazzCombo

Wind Orchestra

SimpleReg Latin

Discotheque Rock

Sweet EP Ballad

The Swing Jazz

BrassBand Parade

SimpleReg Jazz 1

Slow Hand Ballad

J-Pop EasyBallad

New Orleans Jazz

Choral No.9

SimpleReg Jazz 2

Sweet AC Ballad

Sweet Sax Ballad

Ragtime Band

Angel Voices

SimpleReg Jazz 3

70s PrimeTimeTV

Sweet R&B Ballad

Funky Cat Groove

Beat Classic

SimpleReg Organ

Crossover Funk

Lovers R&B

Afro Cuban Jazz

Can Can Pop

BrassBandMarch*A

Joyful Gospel #2

Sentimental Bld

GuitarJazzWaltz

Elegant Waltz

BrassBandMarch*B

Gospel Groove

Tears Ballad

Sax Jazz Waltz

Chorus Waltz

Orchestra March

Worship Shuffle

Glory Ballad

Swing Steps

Love Waltz

6/8MarchingBand

Worship 16beat

Unplugged Ballad

Swing Chorus

Fantasy World

6/8MarchingKids

Soulful Wonder

SentimentalMovie

Relax Swing

Movie Pirates

Light Waltz

Lovely & Soulful

BeautyCinemaBld

Urban Lounge

Chorus Symphony

OrchestraWaltz*A

Danceable Funk

CinemaSymphoBld

Broadway Tap

OrchestraWaltz*B

Bright Pop Rock

Enka Ballad

Super Showtune

OrchestraWaltz*C

AmericanHardRock

6/8 Enka Shuffle

TV Drama Track*A

OrchestraWaltz*D

Power Rock 80s

Christmas Ballad

Quick Introductory Guide

Page

Hollywood Sound

TV Drama Track*B

USA RockStandard

Movie Symphonic
Movie Soundtrack

8Beat Synth Pop

Seaside Rock

Disco Hits 70s

Brazilian Bossa

Yoo-Hoo Polka

8Beat Pop

70s Folk Rock

70s Disco Night

Lounge BossaNova

Pop Polka
Funny Polka

Pop Shuffle

Alternative Rock

Euro Pop Disco

8Beat Bossa Nova

R&B Shuffle

Alternative6/8Rk

Synth Disco

Pop Bossa Nova

Casual Polka

Rock

Highway Rock

Ballroom Disco

Tiny Bossa Nova

Country Town

Rock Shuffle

Funky Rock&Roll

SynDancePop 80s

Cafe Samba

Tango Band

Rock Pop Ballad

Synth Pop Rock

Dirty Dance Beat

BitterSweetLatin

Turkish Pops

Funk

Power Synth Rock

Fortune Disco

Latin Rock

Oriental Dance

RockGuitarBallad

Girls Pop 48 *A

DanceBeatLatin*A

Celtic Beat

Pop Rock&Roll

Girls Pop 48 *B

DanceBeatLatin*B

Celtic Waltz

Back To The 60s

Shiny Girls Pop

Pop Accordion

Trad Irish Pipe

Dancing Boogie

Share The Peace

Sweet Bomba

Irish Ballad

Dance Pop

6/8 Shuffle Rock

DanceAndRhythm*A

Orquesta Salsa

ChinaSweetBallad
ChinaRomanticBld

Disco Pop

ShuffleBoysRock

DanceAndRhythm*B

New Flamenco

R&B E.Piano Bld

Shuffle Pop Rock

DanceAndRhythm*C

Jummin' Reggae

China Dance Beat

R&B Piano Ballad

Shfl Rock Ballad

DanceAndRhythm*D

RumbaAndTheCity

China Kung Fu

8Beat Ballad

Pop Rock Band

Girls Techno

French Caribbean

China Trad Song

8BeatOrchBallad

ShufflePopPiano

Candy Pop Techno

Caribbean Sea

China Trad Dance

3/4 Pop Ballad

Contemp. Country

Dancing Platform

6/8 Pop Ballad

Smooth Country

Dance Beat EX.

Xmas Shuffle

Club Beat

Snowy Christmas

Electronica Beat
Kool Garage
Electronic Dance

BigBand King *A

Pretty Rock

BigBand King *B

Ultra Rock

Eurobeat Party

BigBand King *C

Rock Graffiti

Ibiza Trance

BigBand Swing

Casual Rock

Casual Trance

Jazz Session

Rookie Rock

Trance Party

Fusion Samba

Happy Rock

WonderTranceShfl

Pop Samba

J-Pop Idol Rock

Simple Bossanova

J-Pop Band Rock

Mambo

Spirit Pop

Rumba

Sweet Love Pop

New Age Chillout

Summer Pop
Shaky Dance

ELS-02/ELS-02C Owner’s Manual

Registration Menu

Page
6

REGISTRATION MENU 1
02 SIMPLE

REGISTRATION MENU 2
02 POPS & ROCK

Cls Organ Chapel

J-Pop Piano Band

Cls Organ Hall

J-Pop Boys

RockOrganBallad

J-PopShuffleBeat

R&B Rock Organ

J-Pop BandBallad

Organ Combo

Breezy Ballad

6/8 Organ Ballad

HeroRangerTheme

Soul Jazz Organ

Sunset Pop

Pop Organ 60s

Funky Punch *A

Toy Organ

Funky Punch *B

Theatre Organ NY

GlxyBattleship*A

Nostalgic Organ

GlxyBattleship*B
J-Pop Anime *A
J-Pop Anime *B
70s Honey
70s Hero
DBZ *A
DBZ *B
DBZ *C
DBZ *D

ELS-02/ELS-02C Owner’s Manual

REGISTRATION MENU 3
02 DANCE & BALLAD

REGISTRATION MENU 4
02 JAZZ & LATIN

REGISTRATION MENU 5
02 SYMPHONY & WORLD

Confirming the Electone Version

Factory Set (Initializing
the Electone)

You can confirm the version of your Electone by the
following procedure.

All current settings including Registration Memory, User
Voices, User Rhythms, and LCD display settings can be
deleted at once by the following procedure. Note that the
operation here does not affect the settings of the wireless
LAN settings, which can be initialized on page 200.

Press the [UTILITY] button.
The Utility display appears.

Quick Introductory Guide

Confirming the Electone
Version

Reference page

On the GLOBAL page, press the
[Version] button in the display.

• Saving Registrations (page 118)
• Initialize the wireless LAN settings (page 200)

1
2

Turn off the power.
While holding down the ENDING [1]
button, turn the power back on.
ENDING

The Version dialog appears in the display. Pressing
[OK] closes the dialog.

3
About the latest Firmware Version
Yamaha may from time to time update firmware of the
product without notice for improvement. We recommend
that you check our web site for the latest releases and
upgrade your firmware of the Electone.
http://download.yamaha.com/

Release the ENDING [1] button after
Voice Display appears.

If you don’t want to reset the LCD display settings, you
can initialize only the Registration settings. See page 98
for more information.
Reference page
• Initializing Registration Memory (page 98)

Note that the explanations in this Owner’s Manual apply
to the version of firmware when this Owner’s Manual was
produced.

NOTICE
Executing the Factory Set will erase all your existing data.
Always save your important data to the USB flash drive.

ELS-02/ELS-02C Owner’s Manual

2 Voices
This Electone features more than 900 high-quality Voices. Any of these Voices can be used on the Upper
Keyboard, Lower Keyboard and Pedalboard. Up to four Voice sections are available on the Upper Keyboard
for playing together in a layer, while the Lower Keyboard and Pedalboard each have two Voice sections.
Voices for the Upper Keyboard

Voices for the Lower Keyboard

Voices for Pedalboard

Voices for Each Keyboard
Voices for the Upper Keyboard
Up to four different Voice sections are available on the Upper Keyboard for playing together: Upper Keyboard
Voice 1, Upper Keyboard Voice 2, Lead Voice 1, and Lead Voice 2. Voices for each section can be selected from
the panel.
Upper Keyboard Voice 1
UPPER KEYBOARD VOICE 1

Upper Keyboard Voice 2
BRILLIANCE
BRILLIANT

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

2
MELLOW

Lead Voice 1
LEAD VOICE 1

BRILLIANCE
BRILLIANT

VIOLIN

FLUTE

SYNTH

TRUMPET

BRILLIANCE

MAX

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

MIN

VOLUME

BRILLIANT

MAX

MELLOW

MIN

Lead Voice 2
LEAD VOICE 2

VOLUME

BRILLIANCE

MAX

TO
LOWER

MELLOW

UPPER KEYBOARD VOICE 2

VOLUME

ACOUSTIC

VIRTUAL

ELECTRONIC

CUSTOM

VOLUME

BRILLIANT

MAX

MELLOW

MIN

SOLO
(KNEE)

MIN

Lead Voice 1 and 2 sound only the highest note (or last note played) if two or more keys are played together.
This makes the Lead Voices ideal for “lead” or solo instruments such as Trumpet and Saxophone. Lead Voice 2
of the ELS-02C includes additional, exclusive VA Voices (ELS-02C only) which are not available in other Voice
sections.
Reference page
• Tone Generators of the ELS-02 Series (page 39)

Voices for the Lower Keyboard
Up to two different Voice sections are available on the Lower Keyboard for playing together: Lower Keyboard
Voice 1 and Lower Keyboard Voice 2. Voices for each section can be selected from the panel.
Lower Keyboard Voice 1
LOWER KEYBOARD VOICE 1

Lower Keyboard Voice 2
BRILLIANCE
BRILLIANT

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

2
MELLOW

ELS-02/ELS-02C Owner’s Manual

LOWER KEYBOARD VOICE 2

VOLUME

BRILLIANCE

MAX

MIN

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

VOLUME

BRILLIANT

MAX

MELLOW

MIN

Selecting Voices with the Voice Buttons

Voices for the Pedalboard
Up to two different Voice sections are available on the Pedalboard for playing together: Pedal Voice 1 and
Pedal Voice 2. Voices for each section can be selected from the panel. By default, Pedal Voices 1 and 2 sound
only the highest note if two or more pedals are played.

PEDAL VOICE 1

BRILLIANCE
BRILLIANT

CONTRA
BASS

ELEC.
BASS

TIMPANI

SYNTH
BASS

TO
LOWER

MELLOW

Voices

Lead Voice 1

Lead Voice 2
VOLUME

PEDAL VOICE 2

BRILLIANCE

MAX

CONTRA
BASS

ELEC.
BASS

TIMPANI

SYNTH
BASS

TO
LOWER

MIN

VOLUME

BRILLIANT

MAX

MELLOW

MIN

Reference page
• POLY (page 44)

Selecting Voices with the
Voice Buttons
Since selection of Voices follows the same procedure
throughout all Voice sections, instructions for only the
Upper Keyboard Voice 1 are given here.

Select the desired Voice name from the
Voice menu.
The Voice menu contains many Piano Voices, more
than can fit on one display page. To change the
display pages, press the appropriate number buttons
in the display.

Press one of the Voice buttons in the
Upper Keyboard Voice 1 section.
UPPER KEYBOARD VOICE 1

BRILLIANCE

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

VOLUME

BRILLIANT

MAX

MELLOW

MIN

The color of the selected Voice name changes to
orange, indicating that it has been selected.

Voice buttons

For example, if you have pressed the [PIANO]
button, the following display (Voice Menu) will
appear.

Registering a Voice to Voice Link
By using the [LINK] button at the left top in the display,
you can register the current Voice with all its settings on
the Voice Condition display. This function lets you collect
your favorite Voices, which can then be called up quickly
or conveniently during your performance. The registered
Voice can be selected from the “Voice Link” category on
the display called up via the User buttons of all the Voice
Sections. For detailed instructions, see page 50.

ELS-02/ELS-02C Owner’s Manual

Selecting Voices with the Voice Buttons
NOTE

Changing the Voice volume

Depending on the volume value (set by the slider), two adjacent
VOLUME button lamps may be lit at the same time, indicating an
intermediate position.

There are two ways to set the Voice volume: using the
VOLUME buttons on the panel and using the volume
slider in the display. The VOLUME buttons let you make
coarse adjustments to the volume while the slider gives
you fine control.

Using the VOLUME buttons on the panel
(coarse)
Press one of the VOLUME buttons of the desired Voice
section on the panel to set the level for each Voice.
The buttons have seven volume settings, from a
minimum of 0, or no sound, to a maximum of full
volume.
UPPER KEYBOARD VOICE 1

BRILLIANCE
BRILLIANT

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

Calling up the Voice Menu display
and Voice Condition display
alternatively
Pressing a Voice button once calls up the Voice Menu
display for the selected button. Pressing it a second
time calls up the Voice Condition display. Successive
presses alternate between the two displays.
UPPER KEYBOARD VOICE 1

BRILLIANCE

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

VOLUME

BRILLIANT

MAX

MELLOW

MIN

MAX

Voice Menu display

MELLOW

MIN

Using VOLUME slider in the display
(fine)
Pressing the same Voice button on the panel again (or
pressing the Voice name of the selected Voice in the
display) calls up the Voice Condition display.
Voice Condition display

VOLUME slider

To set the volume, touch the VOLUME slider in the
display or use the Data Control dial. The control range is
from 0 (no sound) to 24 (full volume).

VOLUME
MAX

24
20
16
12
8
4
0
MIN

ELS-02/ELS-02C Owner’s Manual

24
23
12
1
0

When the Voice Condition display is shown, pressing
the [VOICE MENU] button on the display also calls
up the Voice Menu.
From the Voice Condition display, you can control
Voice-related parameters such as Pan, Effect, Volume,
and so on. For more information on the Voice
Condition display, see page 43.
NOTICE
Turning the Electone off erases all panel settings you
have made.
If you wish to keep the panel settings you have made,
save them to a USB flash drive before turning the
Electone off (page 118).

Selecting Voices with the Voice Buttons

About the To Lower function

LEAD VOICE 1

BRILLIANCE

FLUTE

SYNTH

TRUMPET

TO
LOWER

ELEC.
BASS

TIMPANI

SYNTH
BASS

TO
LOWER

MIN

VOLUME

BRILLIANT

MAX

MELLOW

MIN

About the Solo function
The Lead Voice 2 section features an exclusive Solo
function. Solo lets you instantly switch to a solo Lead
Voice in the middle of your performance, muting all
other Upper Keyboard Voices.

Select the Voice that you wish to play
solo in the Lead Voice 2 section.
When the lamp of the [SOLO (KNEE)] button is
turned off, all the Voices for Upper Keyboard
(Upper Keyboard Voice 1 and 2, and Lead Voice
1 and 2) can be played.

Press the [SOLO (KNEE)] button in
the Lead Voice 2 section.
This sets Solo to standby status.
LEAD VOICE 2

BRILLIANCE
BRILLIANT

ACOUSTIC

VIRTUAL

ELECTRONIC

CUSTOM

Unfold

In this condition (Solo on), only the Lead Voice
2 is playable on the Upper Keyboard. (All other
Voices are muted.)
BRILLIANCE

CONTRA
BASS

MAX

MELLOW

PEDAL VOICE 1

To use Solo, unfold the knee lever.
(Bring it down into position.)

VOLUME

BRILLIANT

VIOLIN

Voices

Voices selected for the Lead Voice 1, Pedal Voice 1,
and Pedal Voice 2 sections can also be played on the
Lower Keyboard when the [TO LOWER] button in
each section is on. When [TO LOWER] is on, the
Lead Voice and Pedal Voice cannot be played on the
Upper Keyboard and Pedalboard, respectively.
The To Lower function is not available in the Lead
Voice 2 section.

VOLUME
MAX

To temporarily turn Solo off as you
play, press the Knee Lever to the
right with your knee.
In this condition, all Voices set to the Upper
Keyboard except for Lead Voice 2 are playable
on the Upper Keyboard. (Only Lead Voice 2 is
muted.)
Each time you press the Knee Lever (Solo off )
you can play all Voices except Lead Voice 2, and
each time you release it (Solo on) you can play
only Lead Voice 2 on the Upper Keyboard.

Notes on using Solo
• The knee lever can be used to control other
functions, such as switching Sustain. When other
functions are assigned to the knee lever, pressing
knee lever turns these functions on at the same
time.
• When you release the knee lever, Solo is not applied
to the key being pressed, but is applied from the
next pressed key. When you press the knee lever,
Solo remains active for the key being pressed, and
is cancelled from the next pressed key.
• Lead Voices 1 and 2 sound only the highest note if
two or more keys are played. However, in the Solo
mode, Lead Voice 2 sounds for the last key played.
Reference pages
• Knee Lever (page 180)
• Voice Condition Display (page 43)

SOLO
(KNEE)

MELLOW

MIN

ELS-02/ELS-02C Owner’s Manual

Selecting Voices from the User Buttons

For example, to call up Marimba 1, select the
Percussion category.

Selecting Voices from the
User Buttons

Reference page
• Voice List (page 29)
Percussion

This Electone has a wide variety of Voices from which
you can choose — far greater than what is immediately
apparent from the Voice buttons on the panel. Each Voice
section has one or two User buttons (numbered 1 or 2)
which can be found at the right side of each Voice
section. You can use the User buttons to select Voices that
cannot be selected normally from the Voice buttons —
such as Contrabass for the Upper Keyboard Voice.

Press one of the User buttons in any of
the Voice sections.
UPPER KEYBOARD VOICE 1

BRILLIANCE

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

VOLUME

BRILLIANT

MAX

MELLOW

MIN

User buttons

The name of the selected category (Percussion) is
displayed on the upper left.
The Voice name shown under the category name is
that of the currently assigned Voice and is irrelevant
to the Voice menu below.
To directly select the desired category, hold down one
of the User buttons and simultaneously press the
desired Voice button.

Select the desired instrument category
with the category buttons in the display.

1. While holding down the User button…
UPPER KEYBOARD VOICE 1

You can also choose the “USER” category to select a
User Voice you have created.

BRILLIANCE

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

VOLUME

BRILLIANT

MAX

MELLOW

MIN

Reference page
• Voice Edit (page 138)

If you select “Voice Link” as Category, you can select
a Voice with the settings made on the Voice
Condition display (page 43).
Reference page
• Using Voice Link (page 50)
• Selecting a Voice registered to Voice Link (page 50)
Instrument categories

2. Press the Voice button.

Select a Voice (Marimba 1, for example)
from the displayed Voice Menu.
Pressing the number buttons in the display calls up
the other Voices in the category.

The Voice name of the selected Voice (Marimba 1)
appears above the category name, indicating that the
Voice has been selected.

ELS-02/ELS-02C Owner’s Manual

Voice List

ELS-02/ELS-02C
STRINGS/VIOLIN
1

Power Brass 1

Muted Trumpet 2

Power Brass 2

Muted Trumpet 3

Strings 2

Violin 3

Power Brass 3

Muted Trumpet 4

Strings 3

Violin 4

Soft Brass 1

Cornet

Strings 4

Violin 5

Soft Brass 2

Muted Cornet

Strings 5

Violin 6

Soft Brass 3

Flugel Horn 1

Strings 6

Violin 7

S-BrsSect.Legato

Strings 7

Violin 8

S-BrsSect.Fall

Strings 8

S-Violin 1

S-BrsSect.Up

Trombone 2

Strings 9

S-Violin 2

Brass Fall

Trombone 3

Strings 10

Pizzicato Violin

Trombone Sec 1

Trombone 4

Viola

Trombone Sec 2

Trombone 5

Strings 12

Cello 1

Trombone Sec 3

S-Trombone

Strings 13

Cello 2

Trombone Sec 4

Muted Trombone 1

Strings 14

Trombone Sec 5

Slow Strings 1

Trombone Sec 6

Chamber Strs 1

CONTRABASS
1

Contrabass 1

Flugel Horn 2
7

Trombone 1

Muted Trombone 2
8

Horn 1

Trombone Sec 7

Horn 2

Brass1&Trp6

Horn 3

Chamber Strs 2

Contrabass 2

Brass2&Trp6

Horn 4

Chamber Strs 3

Contrabass 3

Horn 1&4

Horn 5

Chamber Strs 4

Contrabass 4

Trumpet & Cornet

Horn 6

Chamber Strs 5

Contrabass 5

Octave Brass 1

Horn 7

Violin Section

Contrabass 6

Octave Brass 2

Horn 8

Viola Section

Contrabass 7

Octave Brass 3

Horn 9

Cello Section

Pizzicato Bass 1

Octave Brass 4

S-Horn Section

S-Strings 1

Pizzicato Bass 2

Octave Brass 5

Muted Horn 1

Acoustic Bass 1

Octave Brass 6

S-Strings 3

Acoustic Bass 2

Octave Brass 7

Pizzicato Strs 1

Acoustic Bass 3

Octave Brass 8

Tuba 2

Pizzicato Strs 2

Acoustic Bass 4

Octave Brass 9

Euphonium

Pizzicato Strs 3

Acoustic Bass 5

Trumpet 1

Brass Bass 1
Brass Bass 2
Brass Bass 3

S-Strings 2

Pizzicato Strs 4

Bass & Cymbal

Trumpet 2

Pizzicato Strs 5

S-AcousticBass 1

Trumpet 3

Tremolo Strings1

S-AcousticBass 2

Trumpet 4

Tremolo Strings2

Trumpet 5

Tremolo Strings3

Trumpet 6

SpiccatoStrings1
SpiccatoStrings2
SpiccatoStrings3
4

Violin 2

Slow Strings 2

Violin 1

Strings 1

Strings 11

BRASS/TRUMPET
1

Trumpet 7

Muted Horn 2
9

Tuba 1

WOODWIND/FLUTE
1

Flute 1

Brass Section 1

Trumpet 8

Flute 2
Flute 3

Brass Section 2

Trumpet 9

Strings1&7

Brass Section 3

Trumpet 10

Flute 4

Strings2&Viola

Brass Section 4

Trumpet 11

Flute 5

Brass Section 5

Trumpet 12

S-Flute

Brass Section 6

S-Trumpet 1

S-Flute Flutter

Brass Section 7

S-Trumpet 2

Brass Section 8

S-Trumpet Fall

Strings3&4
Strings7&Violin5
Violin5&Cello
Octave Strings 1
Octave Strings 2
Octave Strings 3

Brass Section 9
6

2
Voices

This list shows all available Voices on the Electone. Numbers written at the left side of each column in this list
indicate the numbered buttons displayed in the Voice Menu.

Piccolo
2

Recorder 1

S-Trumpet Shake

Recorder 2

Muted Trumpet 1

Ocarina

Voices whose names begin with the prefix “S-” are referred to as “Super Articulation Voices.” For information about what sound is produced when you play
these Voices, see “Super Articulation Voice Supplementary List” on page 34. For details about Super Articulation Voices, see page 39.

ELS-02/ELS-02C Owner’s Manual

Voice List

Whistle

Clarinet 1

Woodwind&Glocken

Resonance Pad 5

Resonance Pad 7

Clarinet 3

PopVocals Ooh 2

Resonance Pad 8

PopVocals Ooh 3

Resonance Pad 9

Strings&Winds

PopVocals Aah

Resonance Pad 10

Clarinet 6

Strings&Brass 1

PopVocals Baa

S-Clarinet 1

Strings&Brass 2

PopVocals Bee

S-Clarinet 2

Strings&Brass 3

PopVocals Daa

Bell Pad 2

Bass Clarinet

Strings&Horn 1

PopVocals Doo

Bell Pad 3

Oboe 1

Strings&Horn 2

PopVocals Mmh

Bell Pad 4

Oboe 2

Strings&Choir

PopVocals Wah

Bell Pad 5

Oboe 3

Trumpets&Winds

PopVocals Yoo

Bell Pad 6

S-ShoBeDoBa/Hmm

Bell Pad 7

TUTTI
1

Horns&Winds

Resonance Pad 11
3

Bell Pad 1

Orchestra Bass

S-ShoBeDoBa/Wah

Bell Pad 8

Brass&Sax 1

S-ShoBeDoBa/Doo

Bell Pad 9

English Horn 1

Brass&Sax 2

S-ShoBaDoBa/Daa

Bell Pad 10

English Horn 2

Brass&Sax 3

S-DoBaBe/Shoo

Bell Pad 11

Bassoon 1

Brass&Sax 4

S-DoBeDoBe/Wah

Bassoon 2

Brass&Sax 5

S-DoBeBaDa/DoWe

Bassoon 3

Oboe 6

Bell Pad 12
4

Space Pad 1

Brass&Sax Oct

S-BaDaYah/Doo

Space Pad 2

Alto Sax 1

Brass&Sax Unis

S-YaBaDaBa/Doo

Space Pad 3

Alto Sax 2

Brass&Winds 1

S-Scat/Doo

Space Pad 4

Alto Sax 3

Brass&Winds 2

S-Scat/DoWe

Space Pad 5

Orchestra Hit 1

S-Scat/SFX 1

Space Pad 6

S-Alto Sax

Orchestra Hit 2

S-Scat/SFX 2

Space Pad 7

S-Alto Sax Growl

Orchestra Hit 3

S-WhtShouldWeDo

Space Pad 8

Tenor Sax 1

Orchestra Hit 4

S-WhoAreYou/Wee

Space Pad 9

Alto Sax 4

Tenor Sax 2

S-DoWeYouBe/Wah

Tenor Sax 3

S-HaaVibrato/SFX

Tenor Sax 4
S-Tenor Sax 1

CHOIR
1

S-Tenor Sax 2
S-Tenor Sax 3
S-TenorSax Growl
Soprano Sax 1
Soprano Sax 2

Galaxy Pad 2

S-OohBoysVib/SFX

Galaxy Pad 3

Choir 2

S-OhGirlsVib/SFX

Galaxy Pad 4

Choir 3

S-DooVibrato/SFX

Galaxy Pad 5

Choir 4

S-DooBoys/SFX

Bright Pad 1

Choir 5

S-DooGirls/SFX

Bright Pad 2
Bright Pad 3
Bright Pad 4

Choir 6
Choir 7

S-BaaVibrato/SFX

S-SprnoSax Growl

Choir 8

S-WahVibrato/SFX

Baritone Sax 1

Choir 9

S-YooVibrato/SFX

Baritone Sax 2

Choir 10

Sax Ens 1

Choir 11
Vocal
2

Sax Ens 4

Galaxy Pad 1

S-OohVibrato/SFX

S-Soprano Sax

Sax Ens 3

Space Pad 10
5

Choir 1

S-DaaVibrato/SFX

Sax Ens 2

Resonance Pad 6

Oboe 5

PopVocals Haa 1

PopVocals Ooh 1

Oboe 4

Clarinet 2

Clarinet 5

Flutes&Oboes

PopVocals Haa 2

Clarinet 4

S-ChoirSoft Aah

Bright Pad 5
6

Noisy Pad 1
Noisy Pad 2
Noisy Pad 3

PAD
1

Noisy Pad 4
Noisy Pad 5

Smooth Pad 1

Noisy Pad 6

Smooth Pad 2

S-ChoirBoys Aah

Sax Ens 5

S-ChoirSoft Ooh

Smooth Pad 3

Sax Ens 6

S-ChoirBoys Ooh

Smooth Pad 4

Ambi Pad 2

Gospel Choir 1

Smooth Pad 5

Ambi Pad 3

Gospel Choir 2

Smooth Pad 6

Ambi Pad 4

Gospel Choir 3

Smooth Pad 7

Ambi Pad 5

S-GsplChr Hmm

Smooth Pad 8

Ambi Pad 6

S-GsplChr Hm/Ah

Smooth Pad 9

Warm Pad 1

Resonance Pad 1

Warm Pad 2

Woodwind Ens 1

Woodwind Ens 2
Woodwind Ens 3
Woodwind Ens 4
Woodwind Ens 5

Ambi Pad 1

Woodwind Ens 6

S-GsplChr Wow

Woodwind Ens 7

S-GsplChr W/Hey

Resonance Pad 2

Warm Pad 3

Clarinet&Flutes

S-GsplChr Hey

Resonance Pad 3

Warm Pad 4

Resonance Pad 4

Warm Pad 5

Clarinet&Oboe

ELS-02/ELS-02C Owner’s Manual

Voice List

Warm Pad 6

Synth Brass 11

Dark Pad 1

Soft Lead 5

Synth Brass 12

Dark Pad 2

Soft Lead 6

Synth Brass 13

Synth Decay 2

Dark Pad 3

Soft Lead 7

Fat Synth Brass1

Synth Decay 3

Dark Pad 4

Early Lead 1

Fat Synth Brass2

Synth Decay 4

Dark Pad 5

Early Lead 2

Fat Synth Brass3

Synth Pluck 1

Dark Pad 6

PWM Lead 1

Fat Synth Brass4

Synth Pluck 2

Dark Pad 7

PWM Lead 2

DetunedSawBrass1

Synth Pluck 3

Dark Pad 8

Chorus Saw Lead1

DetunedSawBrass2

Synth Pluck 4

Dark Pad 9

Chorus Saw Lead2

DetunedSawBrass3

Synth Pluck 5

Vox Pad 1

Chorus Saw Lead3

Soft Syn Brass 1

Vintage Lead 1

Soft Syn Brass 2

Vox Pad 3

Vintage Lead 2

PWM Brass Slow

Synth Seq 2

Vox Pad 4

Vintage Lead 3

PWM Brass Fast

Synth Seq 3

Vox Pad 5

Vintage Lead 4

Funky Analog

Trance Seq 1

Vox Pad 6

Vintage Lead 5

Synth Strs 1

Trance Seq 2

Sweep Pad 1

Vintage Lead 6

Synth Strs 2

Trance Seq 3

Sweep Pad 2

Vintage Lead 7

Synth Strs 3

Trance Seq 4

Dance Chords 1

Synth Strs 4

Percussive Seq 1

Sweep Phase

Dance Chords 2

Synth Strs 5

Percussive Seq 2

Sweep Flanger 1

Dance Chords 3

Synth Strs 6

Percussive Seq 3

Sweep Flanger 2

Dance Chords 4

Synth Strs 7

Percussive Seq 4

Metallic Pad 1

Dance Chords 5

Synth Strs 8

Percussive Seq 5

Metallic Pad 2

Club Lead 1

Synth Strs 9

Percussive Seq 6

Metallic Pad 3

Club Lead 2

Synth Strs 10

Vox Pad 2

Sweep Pad 3

SFX Pad 1
SFX Pad 2

SFX Pad 3

Soft Lead 4

Club Lead 3

Synth Strs 11
Synth Strs 12

Pop Lead 2

Synth Strs 13

Synth Seq 1

ORGAN
1

Pipe Organ 1
Pipe Organ 2
Pipe Organ 3

Pop Lead 5

LightSynStrings3

Pipe Organ 4

Synth Lead 1

Pop Lead 6

LightSynStrings4

Pipe Organ 5

Synth Lead 2

Pop Lead 7

MovinSynStrings1

Pipe Organ 6

Synth Cla 1

MovinSynStrings2

Pipe Organ 7

Synth Lead 4

Synth Cla 2

FatSynStrings 1

Pipe Organ 8

Synth Lead 5

Synth Cla 3

FatSynStrings 2

Pipe Organ 9

Synth Lead 6

Synth Cla 4

FatSynStrings 3

Pipe Organ 10

Synth Lead 7

Synth Cla 5

FatSynStrings 4

Synth Lead 8

Synth Cla 6

Oct Synth Strs 1

Theatre Organ 2

Synth Lead 9

Synth Cla 7

Oct Synth Strs 2

Theatre Organ 3

Fat Saw Lead 1

Synth Cla 8

Oct Synth Strs 3

Theatre Organ 4

Fat Saw Lead 2

Synth Cla 9

Synth Bell 1

Theatre Organ 5

Fat Saw Lead 3

Synth Cla 10

Synth Bell 2

Theatre Organ 6

Fat Saw Lead 4

Synth Sax

Synth Bell 3

Theatre Organ 7

Fat Saw Lead 5

Synth Trumpet

Synth Bell 4

Theatre Organ 8

Fat Saw Lead 6

Synth Violin

Synth Bell 5

Theatre Organ 9

Synth Brass 1

Synth Bell 6

Theatre Organ 10

Filter Lead 2

Synth Brass 2

Synth Bell 7

Thtr Tibia Full

Filter Lead 3

Synth Brass 3

Sky Bell 1

Thtr Tibia 8&4

Filter Lead 4

Synth Brass 4

Sky Bell 2

Thtr Tibia 16&4

Filter Lead 5

Synth Brass 5

Vox Bell 1

Thtr Tp & Kinura

Filter Lead 6

Synth Brass 6

Vox Bell 2

Thtr Vox & Tibia

Filter Lead 7

Synth Brass 7

Pop Synth Bell 1

Thtr Trumpet16&8

Soft Lead 1

Synth Brass 8

Pop Synth Bell 2

Soft Lead 2

Synth Brass 9

Pop Synth Bell 3

Harmonica 2

Soft Lead 3

Synth Brass 10

Pop Synth Bell 4

Harmonica 3

Filter Lead 1

Synth Pluck 6
15

LightSynStrings2

Synth Decay 1

Pop Lead 4

Synth Lead 3

Pop Synth Bell 5

LightSynStrings1

SYNTH

Pop Lead 1

Pop Lead 3

Voices

Theatre Organ 1

Harmonica 1

ELS-02/ELS-02C Owner’s Manual

Voice List

Harmonica 4

Combo Organ 4

S-Harmonica

Rock Organ 1

E.Guitar Amp 3

Stack E.Piano 2

E.Guitar Amp 4

Bandoneon 1

Rock Organ Slow1

S-E.Grand CP80 1

E.Guitar Amp 5

Bandoneon 2

Rock Organ Slow2

S-E.Grand CP80 2

E.Guitar Amp 6

Accordion 1

Rock Organ Slow3

Clavi 1

E.Guitar Amp 7

Accordion 2

Rock Organ Slow4

Clavi 2

Muted Guitar 1

Accordion 3

Rock Organ Slow5

Clavi 3

Muted Guitar 2

Accordion 4

Rock Organ Slow6

Clavi 4

Muted Guitar 3

Accordion 5

Rock Organ Slow7

S-Clavi

Muted Guitar 4

Accordion 6

Rock Organ Slow8

S-Muted Clavi

S-Clean Solid 1

Accordion 7

Rock Organ Fast1

Accordion 8

Rock Organ Fast2
10

Organ Bass 1
Organ Bass 2

AccordionMuset.1
AccordionMuset.2

S-Clean Solid 2
S-Clean Solid 3

GUITAR

S-Clean Guitar 1

Nylon Guitar 1

S-Clean Guitar 2

Organ Bass 3

Nylon Guitar 2

S-Clean Guitar 3

Organ Bass 4

Nylon Guitar 3

S-Clean Guitar 4

Accordion Full

Nylon Guitar 4

S-Clean Guitar 5

Jazz Organ 1

Nylon Guitar 5

S-Clean Guitar 6

S-Nylon Guitar 1

S-Clean Finger 1

Piano 1

S-Nylon Guitar 2

S-Clean Finger 2

Jazz Organ 4

Piano 2

Flamenco Guitar

S-Clean Finger 3

Jazz Organ 5

Piano 3

S-FlamencoGuitar

S-Clean Finger 4

Jazz Organ 6

S-Piano 1

Steel Guitar 1

S-CleanVintage 1

Jazz Organ 7

S-Piano 2

Steel Guitar 2

S-CleanVintage 2

Jazz Organ 8

Honkytonk Piano

Steel Guitar 3

Jazz Organ 9

Octave Piano 1

Steel Guitar 4

Jazz Organ Slow1

Octave Piano 2

SteelGuitarSlide

Distortion Gtr 2

Jazz Organ Slow2

Octave Piano 3

SteelGuitar Mute

Distortion Gtr 3

Jazz Organ Slow3

PIANO
1

S-CleanVintage 3
7

Distortion Gtr 1

Harpsichord 1

S-Steel Guitar 1

Distortion Gtr 4

Jazz Organ Fast1

Harpsichord 2

S-Steel Guitar 2

Distortion Gtr 5

Jazz Organ Fast2

Harpsichord 3

12Str Guitar 1

Distortion Gtr 6

Vintage Organ

S-Harpsichord

12Str Guitar 2

Distortion Gtr 7

Vin Organ Slow 1

Clavichord

Jazz Guitar 1

Distortion Gtr 8

Vin Organ Slow 2

E.Guitar Amp 2

Stack E.Piano 1

Rock Organ 3

Jazz Organ 3

E.Guitar Amp 1

Reed Organ

Jazz Organ 2

S-Stage E.Piano5

Rock Organ 2

Accordion 10

S-Stage E.Piano4

S-BluesHarp

Accordion 9

Distortion Gtr 9

DX E.Piano 1

Jazz Guitar 2

Vin Organ Fast 1

DX E.Piano 2

Jazz Guitar 3

Vin Organ Fast 2

DX E.Piano 3

Jazz Guitar 4

S-Dist Solid 2

S-Dist Solid 1

Vin Organ Fast 3

DX E.Piano 4

JazzGuitar Slide

S-Dist Solid 3

Tonewheel Organ1

DX E.Piano 5

Jazz Guitar Oct

S-Dist Solid 4

Tonewheel Organ2

DX E.Piano 6

S-Jazz Guitar 1

S-Dist Solid 5

Tonewheel Organ3

DX EP Sweet 1

S-Jazz Guitar 2

S-Dist Solid 6

Tonewheel Organ4

DX EP Sweet 2

S-Jazz Guitar 3

S-Dist Vintage 1

Tonewheel Organ5

DX E.Piano&Pad 1

Elec Guitar 1

S-Dist Vintage 2

Pop Organ 1

DX E.Piano&Pad 2

Elec Guitar 2

S-Dist Crunch 1

Pop Organ 2

Galaxy EP

Elec Guitar 3

S-Dist Crunch 2
S-Dist Finger 1

Pop Organ 3

DX EP Dynamics

Elec Guitar 4

Stage E.Piano 1

Elec Guitar 5

Pop Organ 5

Stage E.Piano 2

Clean Guitar 1

Pop Organ 6

Stage E.Piano 3

Clean Guitar 2

Banjo 2

Pop Organ Fast 1

Stage E.Piano 4

Clean Guitar 3

Mandolin

Pop Organ Fast 2

Stage E.Piano 5

Clean Guitar 4

Pedal Steel Gtr1

Pop Organ Fast 3

Stage E.Piano 6

Clean Guitar 5

Pedal Steel Gtr2

Combo Organ 1

S-Stage E.Piano1

Clean Guitar 6

Pedal Steel Gtr3

Combo Organ 2

S-Stage E.Piano2

Clean Guitar 7

Harp 1

Combo Organ 3

S-Stage E.Piano3

Clean Guitar 8

Harp 2

Pop Organ 4

S-Dist Finger 2
9

Banjo 1

ELS-02/ELS-02C Owner’s Manual

Voice List

Harp 3

Slap Bass 1

Oud

Smooth Bass 9

Sitar 1

Harp 5

Slap Bass 3

Smooth Bass 10

Sitar 2

Deep Bass 1
Deep Bass 2

Slap Bass 6

Deep Bass 3

Log Drum
Kalimba

Picked Bass 1

Deep Bass 4

Picked Bass 2

Deep Bass 5

Vibraphone 3

Picked Bass 3

Marimba 1

Picked Bass 4

Marimba 2

Picked Bass 5

Fat Bass 2

Marimba 3

Picked Bass 6

Fat Bass 3

Xylophone 1

Picked Bass 7

Fat Bass 4

Xylophone 2

Picked Bass 8

Fat Bass 5

Glockenspiel 1

Picked Bass 9

Fat Bass 6

Glockenspiel 2

Picked Bass 10

Fat Bass 7

Fretless Bass 1

Fat Bass 8

Celesta 1

Fretless Bass 2

Fat Bass 9

Celesta 2

Fretless Bass 3

Fat Bass 10

Music Box 1

Fretless Bass 4

Glockenspiel 3

Kamanche

Slap Bass 5

Vibraphone 2

Vibraphone 1

Steel Drum

Voices

PERCUSSION

Smooth Bass 8

Slap Bass 2

Slap Bass 4

Harp 4

Deep Bass 6
5

Fat Bass 1

Music Box 2

WORLD

Chime 1
Chime 2
Chime 3

SYNTH BASS
1

Pan Flute 2
S-Pan Flute 1

Funk Bass 3

S-Pan Flute 2

Funk Bass 4

S-Irish Pipe 1

Timpani 1

Funk Bass 5

S-Irish Pipe 2

Timpani 2

Funk Bass 6

Bagpipe

Timpani 3

Funk Bass 7

Dulcimer 1

Timpani 4

Funk Bass 8

Dulcimer 2

Timpani 5

Funk Bass 9

Timpani Roll 1

Funk Bass 10
2

Zither
2

Shakuhachi

Dance Bass 1

Yokobue

Timpani Roll 3

Dance Bass 2

Shamisen 1

Timpani Roll 4

Dance Bass 3

Shamisen 2

S-Timpani Roll

Dance Bass 4

Koto

S-TimpaniRoll fp

Dance Bass 5

Timpani Roll 2

Dance Bass 6

ELECTRIC BASS
1

Pan Flute 1

Funk Bass 2

TIMPANI
1

Funk Bass 1

Fingered Bass 1
Fingered Bass 2
Fingered Bass 3
Fingered Bass 4
Fingered Bass 5
Fingered Bass 6
Fingered Bass 7
Fingered Bass 8
Fingered Bass 9
Fingered Bass 10
Fingered Bass 11
S-Fingerd Bass 1
S-Fingerd Bass 2
S-Fingerd Bass 3

Taishokoto
3

Er Hu 1

Dance Bass 7

Er Hu 2

Dance Bass 8

Er Hu 3

Dance Bass 9

Ban Hu

Dance Bass 10

Ma Tou Qin

Dance Bass 11

Di Zi

Dance Bass 12

Suo Na

Dance Bass 13

Hu Lu Si

Dance Bass 14

Sheng

Dance Bass 15

Gu Zheng 1

Dance Bass 16

Gu Zheng 2

Smooth Bass 1

Yang Qin

Smooth Bass 2

Pi Pa

Smooth Bass 3

S-Pi Pa

Smooth Bass 4

Liu Qin

Smooth Bass 5
Smooth Bass 6
Smooth Bass 7

San Xian
4

Nay
Surnay

ELS-02/ELS-02C Owner’s Manual

Voice List

Super Articulation Voice Supplementary List
This list describes the effects that are produced by playing the Super Articulation Voices (having names beginning with
the prefix “S-”). The meanings of the column titles are as follows:
• Super Articulation
Describes the effects produced just by playing the keyboard, regardless of the settings. For information about AEM in the list, see
page 7. “Key-off Samples” refers to the special, characteristic sound which results when releasing the key.

• Auto
Describes the effects produced by playing the keyboard when setting AUTO (page 45) to ON in page 2 of the Voice Condition display.
An effect marked with “(octave)” will be produced only when you play intervals of minor 7th, Major 7th or octave in legato.

• ART.1 / ART.2
Describes the effects produced by playing the keyboard with the left footswitch when selecting “ART.1” or “ART.2” of FOOT SWITCH
LEFT in page 2 of the Voice Condition display. An effect indicated by “***/***” means a key-on effect/key-off effect. For example,
“Grace Note/Bend Down” indicates that the Grace Note is added by pressing a key while turning on the Left Footswitch while the Bend
Down is applied by releasing a key while turning on the Left Footswitch. An effect indicated by “Sound Effect” is applied when you just
simply press the Left Footswitch. An effect having other indications is applied when you press a key while turning on the Left
Footswitch.

• Type
Lists one of the four types A – D, each of which is determined by how you play the Voice. For example about each of four types, see
page 39.
Category
STRINGS/
VIOLIN

CONTRABASS

BRASS/
TRUMPET

Auto

ART.1

ART.2

S-Strings 1

Voice Name

Legato

–

S-Strings 2

Legato

–

S-Strings 3

Legato

–

S-Violin 1

Key-off Samples,
Legato (AEM)

Bend Up, Bend Down,
Portamento (Octave)

Bend Up /
Bend Down

Grace Note /
Bend Down

S-Violin 2

Key-off Samples,
Legato (AEM)

Portamento (Octave)

Grace Note /
Bend Down

Bend Up /
Bend Down

Type

–

S-AcousticBass 1

Legato

–

Sound Effect

S-AcousticBass 2

Legato

–

Sound Effect

S-BrsSect.Legato

Legato

–

S-BrsSect.Fall

–

Fall Down

–

S-BrsSect.Up

–

Glissando Up

–

B
B

S-Trumpet 1

Legato (AEM)

Bend Up, Bend Down,
Glissando (Octave)

Bend Up /
Bend Down

Glissando Up /
Glissando Down

S-Trumpet 2

Legato (AEM)

Glissando (Octave)

Bend Up /
Bend Down

Glissando Up /
Glissando Down

S-Trumpet Fall

–

Glissando Up

–

S-Trumpet Shake

–

Shake

–

S-Trombone

WOODWIND/
FLUTE

Super Articulation

Legato (AEM)

Bend Up, Bend Down,
Glissando (Octave)

S-Horn Section

Legato

–

S-Flute

Key-off Samples,
Legato (AEM)

–

S-Flute Flutter

Key-off Samples,
Legato (AEM)

S-Clarinet 1

Bend Up (Fast) /
Bend Down
–

Bend Up (Slow) /
Glissando Down

–

Grace Note /
Bend Down

Glissando Up /
Glissando Down

Grace Note,
Glissando (Octave)

Grace Note /
Bend Down

Glissando Up /
Glissando Down

Legato (AEM)

Grace Note,
Glissando (Octave)

Bend Up /
Bend Down

Glissando Up /
Glissando Down

S-Clarinet 2

Legato (AEM)

Bend Up, Bend Down,
Glissando (Octave)

Bend Up /
Bend Down

Glissando Up /
Glissando Down

S-Alto Sax

Key-off Samples,
Legato (AEM)

Bend Up,
Glissando (Octave)

Bend Up /
Bend Down

Glissando Up /
Glissando Down

S-Alto Sax Growl

Key-off Samples,
Legato (AEM)

Bend Up,
Glissando (Octave)

Bend Up /
Bend Down

Glissando Up /
Glissando Down

S-Tenor Sax 1

Key-off Samples,
Legato (AEM)

Bend Up,
Glissando (Octave)

Bend Up /
Bend Down

Glissando Up /
Glissando Down

S-Tenor Sax 2

Legato (AEM)

Bend Up,
Glissando (Octave)

Bend Up /
Bend Down

Glissando Up /
Glissando Down

S-Tenor Sax 3

Legato (AEM)

Bend Up, Bend Down,
Glissando (Octave)

Bend Up /
Bend Down

Glissando Up /
Glissando Down

S-TenorSax Growl

Key-off Samples,
Legato (AEM)

Bend Up,
Glissando (Octave)

Bend Up /
Bend Down

Glissando Up /
Glissando Down

S-Soprano Sax

Key-off Samples,
Legato (AEM)

Grace Note,
Glissando (Octave)

Grace Note /
Bend Down (Fast)

Bend Up /
Bend Down

S-SprnoSax Growl

Key-off Samples,
Legato (AEM)

Bend Up,
Glissando (Octave)

Bend Up /
Bend Down

Glissando Up /
Glissando Down

ELS-02/ELS-02C Owner’s Manual

Voice List

Category
CHOIR

Voice Name

ART.1

ART.2

Legato

Super Articulation

–

S-ChoirBoys Aah

Legato

–

S-ChoirSoft Ooh

Legato

–

S-ChoirBoys Ooh

Legato

–

S-GsplChr Hmm

Key-off Samples, Legato

S-GsplChr Hm/Ah
S-GsplChr Wow

Key-off Samples, Legato

S-GsplChr W/Hey

PIANO

GUITAR

Sound Effect
“Aah”

–

Sound Effect

Sound Effect
–
Sound Effect
–

2
A
B
A

–

“Hey”

Key-off Samples, Legato

–

Sound Effect

S-ShoBeDoBa/Hmm

Scat Singing

–

“Hmm”

–

S-ShoBeDoBa/Wah

Scat Singing

–

“Wah”

–

S-ShoBeDoBa/Doo

Scat Singing

–

“Doo”

–

S-ShoBaDoBa/Daa

Scat Singing

–

“Daa”

–

S-DoBaBe/Shoo

Scat Singing

–

“Shoo”

–

S-DoBeDoBe/Wah

Scat Singing

–

“Wah”

–

S-GsplChr Hey

ORGAN

–
–

Type

Sound Effect

B
A

S-DoBeBaDa/DoWe

Scat Singing

–

“DoWe”

–

S-BaDaYah/Doo

Scat Singing

–

“Doo”

–

S-YaBaDaBa/Doo

Scat Singing

–

“Doo”

–

S-Scat/Doo

Scat Singing

–

“Doo”

–

S-Scat/DoWe

Scat Singing

–

“DoWe”

–

S-Scat/SFX 1

Legato

–

Sound Effect

S-Scat/SFX 2

Legato

–

Sound Effect

S-WhtShouldWeDo

Scat Singing

–

“Wah”

–

S-WhoAreYou/Wee

Scat Singing

–

“Wee”

–

S-DoWeYouBe/Wah

Scat Singing

–

“Wah”

–

S-HaaVibrato/SFX

Key-off Samples, Legato

–

Sound Effect

S-OohVibrato/SFX

Legato

–

Sound Effect

S-OohBoysVib/SFX

Legato

–

Sound Effect

S-OhGirlsVib/SFX

Legato

–

Sound Effect

S-DooVibrato/SFX

Key-off Samples, Legato

–

Sound Effect

S-DooBoys/SFX

Key-off Samples, Legato

–

Sound Effect

S-DooGirls/SFX

Key-off Samples, Legato

–

Sound Effect

S-DaaVibrato/SFX

Legato

–

Sound Effect

A
A

S-BaaVibrato/SFX

Legato

–

Sound Effect

S-WahVibrato/SFX

Legato

–

Sound Effect

S-YooVibrato/SFX

Legato

–

Sound Effect

S-Harmonica

Legato (AEM)

Grace Note, Bend Down,
Legato (Octave)

Bend Up /
Bend Down

Grace Note /
Bend Down

S-BluesHarp

Legato (AEM)

Grace Note, Bend Down,
Legato (Octave)

Bend Up /
Bend Down

Grace Note /
Bend Down

S-Piano 1

Key-off Samples

–

S-Piano 2

Key-off Samples

–

S-Harpsichord

Key-off Samples

–

S-Stage E.Piano1

Key-off Samples

–

S-Stage E.Piano2

Key-off Samples

–

S-Stage E.Piano3

Key-off Samples

–

S-Stage E.Piano4

Key-off Samples

–

S-Stage E.Piano5

Key-off Samples

–

S-E.Grand CP80 1

Key-off Samples

–

–
–

S-E.Grand CP80 2

Key-off Samples

–

S-Clavi

Key-off Samples

–

S-Muted Clavi

Key-off Samples

–

S-Nylon Guitar 1

Key-off Samples, Legato

S-Nylon Guitar 2

–

Sound Effect

–

Harmonics

Sound Effect
–

A
B

S-FlamencoGuitar

Key-off Samples, Legato

–

Sound Effect

S-Steel Guitar 1

Key-off Samples, Legato

–

Sound Effect

–

Harmonics

Key-off Samples, Legato

–

Sound Effect

S-Jazz Guitar 2

Key-off Samples, Legato

–

Sound Effect

S-Jazz Guitar 3

Key-off Samples

–

Octave Playing

S-Steel Guitar 2
S-Jazz Guitar 1

–

Voices

Auto

S-ChoirSoft Aah

ELS-02/ELS-02C Owner’s Manual

Voice List

Category
GUITAR

Super Articulation

Auto

ART.1

ART.2

S-Clean Solid 1

Voice Name

Key-off Samples, Legato

–

Sound Effect

S-Clean Solid 2

Legato

–

Sound Effect

S-Clean Solid 3

Legato

–

Sound Effect

S-Clean Guitar 1

Key-off Samples

–

Harmonics

–

Harmonics

Key-off Samples, Legato

–

Sound Effect

–

Sound Effect

S-Clean Guitar 5

Key-off Samples, Legato

–

Sound Effect

S-Clean Guitar 6

Key-off Samples, Legato

–

Sound Effect

S-Clean Finger 1

Key-off Samples, Legato

–

Sound Effect

S-Clean Finger 2

Key-off Samples, Legato

–

Sound Effect

S-Clean Guitar 2
S-Clean Guitar 3
S-Clean Guitar 4

TIMPANI

ELECTRIC
BASS

WORLD

–
–
Sound Effect

Type

A
B
B
A

S-Clean Finger 3

Key-off Samples, Legato

–

Sound Effect

S-Clean Finger 4

Key-off Samples, Legato

–

Sound Effect

S-CleanVintage 1

Key-off Samples, Legato

–

Sound Effect

S-CleanVintage 2

Key-off Samples, Legato

–

Sound Effect

S-CleanVintage 3

Key-off Samples, Legato

–

Sound Effect

S-Dist Solid 1

Key-off Samples, Legato

–

Sound Effect

S-Dist Solid 2

Key-off Samples, Legato

–

Sound Effect

S-Dist Solid 3

Key-off Samples, Legato

–

Sound Effect

S-Dist Solid 4

Legato

–

Sound Effect

S-Dist Solid 5

Key-off Samples, Legato

–

Sound Effect

S-Dist Solid 6

Key-off Samples, Legato

–

Sound Effect

S-Dist Vintage 1

Key-off Samples, Legato

–

Sound Effect

S-Dist Vintage 2

Key-off Samples, Legato

–

Sound Effect

S-Dist Crunch 1

Key-off Samples, Legato

–

Sound Effect

S-Dist Crunch 2

Key-off Samples, Legato

Sound Effect

–

Sound Effect

S-Dist Finger 1

–

Grace Note

–

S-Dist Finger 2

–

Grace Note

–

S-Timpani Roll

Key-off Samples

S-TimpaniRoll fp

Key-off Samples

–

S-Fingerd Bass 1

Key-off Samples

–

Sound Effect

S-Fingerd Bass 2

Key-off Samples

–

Sound Effect

S-Fingerd Bass 3

Key-off Samples

–

Sound Effect

S-Pan Flute 1

Legato (AEM)

Bend Up,
Glissando Up (Octave)

Bend Up (Fast) /
Bend Down

Bend Up (Slow) /
Bend Down

S-Pan Flute 2

Legato (AEM)

Bend Up,
Glissando Up (Octave)

Bend Up /
Bend Down

Glissando Up /
Glissando Down

S-Irish Pipe 1

Legato (AEM)

Bend Up, Bend Down,
Grace Note (Octave)

Bend Up /
Bend Down

Grace Note /
Bend Down

S-Irish Pipe 2

Legato,
Grace Note (AEM)

Bend Down

Bend Up /
Bend Down

Grace Note /
Bend Down

S-Pi Pa

Key-off Samples

ELS-02/ELS-02C Owner’s Manual

–

–
–

–

–
–

–

Voice List

ELS-02C (VA)
Voice Name

Range

Description

VA ACOUSTIC
1

G2 – A6

Flute with breath and other noises, which may squeak in higher registers. Setting the Touch Tone (After)
higher and applying keyboard pressure can recreate flutter tonguing.

V-Flute 2

C2 – C6

Flute suited for legato playing. Setting the User Vibrato depth to higher values has a nice effect.

V-Ocarina

C3 – C6

Soft ocarina.

V-Oboe

C3 – F5

Wider dynamic range with the Touch Tone effect.

V-Clarinet

D2 – F5

Playing pianissimo creates breath noises, while playing fortissimo creates a brighter sound with slightly
lower pitch.

V-Soprano Sax

A♯2 – D5

Rounder and softer soprano saxophone.

V-Alto Sax 1

D♯2 – G4

A bright alto saxophone for contemporary music. You can make the sound ‘break up’ as if overblowing the
instrument by setting After Touch to maximum and applying pressure to the key.

V-Alto Sax 2

C2 – E4

Alto saxophone suited for fusion music. Playing legato creates squeaky attack sounds and high After
Touch settings produce an overblowing effect.

V-Tenor Sax 1

A♯2 – C4

Multi-purpose tenor saxophone. Soft in pianissimo and brighter in fortissimo.

V-Tenor Sax 2

C1 – G4

Soft tenor saxophone suited for jazz. Playing Legato creates squeaky attack sounds.

V-Breath Sax 1

A♯2 – C4

Soft, breathy tenor saxophone suited for slow tempo music.

V-Breath Sax 2

C2 – E4

V-Trumpet 1

A♯2 – A♯4

Brighter, breathy tenor saxophone suited for jazz.
Soft trumpet. Slides and glissandos can be created with Horizontal Touch.

V-Trumpet 2

C2 – C5

Trumpet with characteristic attack sound. Lip slurs can be created by changing the pitch.

V-Trumpet 3

G2 – C5

Soft trumpet. Applying slight keyboard pressure produces breath noise.

V-Muted Trumpet

A♯2 – A♯4

V-Trombone

E1 – G3

V-High Trombone

C2 – C5

V-Shakuhachi

---

2
Voices

V-Flute 1

Cup-muted trumpet.
Slides and glissandos can be created with Horizontal Touch. Also, high After Touch settings produce an
overblowing effect.
Brighter trombone suited for high notes.
Higher Touch Tone (After) setting increases breath noise and also squeaks the sound.

V-Erhu

---

Playing with softer touch produces hoarse sounds.

V-Sitar

---

Playing with harder touch squeaks the sounds.

VA VIRTUAL
1

V-Pan Pipe 1

E2 – G5

V-Pan Pipe 2

C1 – C6

Setting the Touch Tone (After) higher and applying keyboard pressure can result in flutter tonguing.
Panpipe flute sound. After and Initial Touch affect the pitch and timbre.

V-Bamboo

C1 – C6

Bamboo panpipe sound with breath noise. After Touch changes the pitch dynamically.
Sound of blowing a bottle. Playing trills over a wide interval range creates a squeaky attack sound.

V-Bottle

C1 – C6

V-Floboe

F2 – C7

A hybrid sound combining oboe and saxophone.

V-Alt Kwek

C3 – C7

A hybrid sound grafting an oboe reed onto a piccolo, with a distinctive pitch change in the low registers.

V-Tin Whistle

C2 – C7

V-India

---

V-East

G1 – C5

V-Zag

---

Sound of a small flute. Playing with softer touch produces breath noise.
Percussive sitar sound.
Sitar with resonance and reverberation.
Simulation of a bowed ethnic instrument. Playing legato brings out higher octave sounds.

V-Asian Pluck

C1 – G6

Plucked ethnic instrument. Using Initial Touch brings out higher octave sounds.

V-Air Reed 1

A2 – C5

A hybrid sound grafting an oboe reed onto a saxophone. High After Touch settings produce an
overblowing effect.

V-Air Reed 2

E2 – C5

A hybrid sound combining a conventional flute with panpipes.

V-Airphone

A2 – C5

A hybrid sound grafting an oboe reed onto a soprano saxophone.

V-Thin Reed

E2 – G5

A hybrid sound grafting a clarinet mouthpiece onto a flute. High After Touch settings produce an
overblowing effect.

V-Harmophone

G1 – G5

A hybrid sound combining a harmonica and saxophone. Depending on use of Touch Tone, both breath
noise and a bright clear sound can be produced.

V-Saxonica

G2 – G5

Harmonica sound resembling an alto saxophone. Playing with soft touch results in a high-pitched sound.

V-Grass Reed

E2 – G5

A hybrid sound grafting a bassoon reed onto a brass wind instrument. After Touch changes the pitch.

V-Soft Reed 1

A2 – G5

A hybrid sound grafting a clarinet mouthpiece to a brass wind instrument.

V-Soft Reed 2

C1 – C6

A hybrid sound grafting a bassoon reed onto a soprano saxophone; includes breath noise.

V-Troppo

E1 – C6

Thick bassoon sound. After Touch changes the pitch dynamically, and applying keyboard pressure more
produces wind noise.

V-Buzz String

A2 – F5

Simulation of a hybrid bowed-wind instrument.

V-Bow String

E1 – E6

Artificial synthesized strings sound.

V-String Bow

C1 – C6

Simulation of a slow-attacked violin bowed with something other than a violin bow. Playing trills over a wide
interval range creates a squeaky attack sound.

V-Cosmosis

C1 – G5

Bowed strings. Initial Touch affects the attack sound.

V-E.Violin

C1 – C6

Synth violin.

V-Bowe

C1 – C5

Simulation of a hybrid bowed-saxophone sound.

ELS-02/ELS-02C Owner’s Manual

Voice List

Voice Name
3

Range

Description

V-Claviolin

G2 – G5

A hybrid sound combining a violin and wind instrument.

V-Air Bow

C2 – G5

A bowed instrument sound with noise.

V-Waspy Horn

C1 – G4

A hybrid sound grafting a brass wind instrument mouthpiece to a wind instrument. After Touch affects the
muted condition. Lip-slide can be created with Horizontal Touch.

V-Mizu Horn

C1 – C6

A hybrid sound combining a harmonica and trumpet.

V-Cosmo Mute

C1 – C5

Simulation of a distorted brass wind instrument. After and Initial Touch affect the muted condition.

V-Fago

F1 – C7

Simulated deep bassoon sound. Playing with soft touch produces breath noise with a high tone range.

VA ELECTRONIC
1

V-Jazz Guitar

E1 – E5

Soft and warm jazz guitar sound.

V-Picked Guitar

E1 – E5

Hard-attack guitar played with a pick.

V-Simple Bass

---

Voice suited for bass phrases. After and Initial touch affect the resonance effect.*

V-Bass Attack

---

Voice suited for bass phrases. Initial touch affects the muted condition.*

V-Thumb Bass

C1 – E4

Bass sounds played with the thumb.*

V-Fretless

C1 – C5

Fretless bass.*

V-Saw Lead

C1 – C5

Multi-purpose lead sounds. After Touch affects the filter changes.

V-Edge Lead

C1 – C4

Synth bass sound with a sharp attack portion. After Touch affects the filter changes.

V-Dist Lead

G1 – C5

Distorted lead sounds. Setting the Touch Tone (After) higher and applying keyboard pressure raises the
pitch.

V-Woody Lead

C2 – G5

Lead sound with woody quality.

V-Muted Lead

C2 – C5

Lead sound with wah-wah effect. After Touch heightens the wah-wah effect.

V-Talken Lead

C1 – C5

Human voice-like lead sound. Setting the Touch Tone (After) higher and applying keyboard pressure
allows creation of hum noise.

V-Mad Tube

---

Distorted synth lead with long release sound. High After Touch settings produce an overblowing effect.*

V-Mob

---

Distorted lead sound played with pick. Setting the Touch Tone (After) higher and applying keyboard
pressure raises the pitch by an octave.*

V-Transylva

C1 – C6

Softly distorted lead sounds.*

V-Destiny

---

Wah guitar with a sharp attack.

V-Igneous

C1 – C4

Lead sound with full feedback effects. After Touch affects the degree of feedback.

V-Wurli Lead

C1 – C5

Simple synth lead with a sharp attack. High After Touch settings produce an overblowing effect.

V-Fifty Fifty

---

Analog synthesizer with simple square wave sound.

V-Ana Wave

---

Analog synthesizer. Initial touch and the length of holding down a key changes the filter effect.

V-Lyric Off

C1 – C6

V-Ossyncro

C1 – C6

Wind synth sound with square wave sound.
Lead sound with dynamic pitch change.*

V-Wahman

C1 – A3

Wah-wah lead voice with pitch change in the attack.

V-Q. Klav

C1 – G5

Funky electric clav sound. Initial touch affects the timbre.*

V-SFX 1

---

Simulated hand-tapping of the open end of a pipe.

V-SFX 2

---

Simulated scraping of a metallic plate. After Touch affects the degree of scraping.

V-SFX 3

---

Simulated hitting of a metallic plate with a wood block. Initial Touch changes the apparent hardness of the
wood block.

V-SFX 4

---

Soft playing results in wind sounds. Applying keyboard pressure (After Touch) produces a distorted guitar
sound.

V-SFX 5

---

Jet noise. Applying keyboard pressure produces lead sound.

V-SFX 6

---

Simulation of metallic plates colliding.

V-SFX 7

---

Initial touch affects the resonance effect.

V-SFX 8

---

Cry of a strange animal.

V-SFX 9

---

Simulation of a thick and long hose.

V-SFX 10

---

Trumpet with loop feedback sound.

V-SFX 11

---

Initial touch produces the sound of hitting metal, and After Touch increase the noise.

V-SFX 12

---

Initial touch produces the sounds of footsteps, and After Touch creates a windy sound.

V-SFX 13

---

The sound of a soprano saxophone played in the distance. Playing with softer touch produces only breath
noise.

V-SFX 14

---

Lead sound with After Touch-produced pitch change.

V-SFX 15

---

Initial touch produces the sound of metal being scraped, and After Touch creates noise.

V-SFX 16

---

Cry/roar of an animal.

Each acoustic instrument has its own ideal note range. Keep in mind that playing outside of the range may create unexpected and unrealistic sounds.
Voices that do not have a specified ideal note range (“---” is shown in the chart above) can be played in any range and result in optimum sound with stable
pitch.
* When the Feet parameter is set to 8', the resulting sound is actually 16'.

ELS-02/ELS-02C Owner’s Manual

Tone Generators of the ELS-02 Series

Tone Generators of the
ELS-02 Series

AWM Tone Generator
AWM is a synthesis system based on sampled waves, or
audio recordings of actual instruments. AWM Voices use
multiple samples, so that they sound like a real
instrument. This section also describes how to play the
Super Articulation Voices, since you will need special
settings and operations for playing these Voices.

What are Super Articulation Voices?
The Super Articulation Voices (having names beginning
with the prefix “S-”) realistically recreate many of the
performance techniques and characteristic sounds
generated when an artist plays an instrument. As a result,
you can produce superbly detailed expression such as the
realistic sound of finger slides on guitar and keyboard
action noise of electronic piano. Moreover, these Voices
will enable you to feel the breath noise of musicians
which employ performance techniques such as legato,
pitch bend and glissando, as well as scat singing (“ShooBee-Doo-Bah,” etc.), such as adlibbed by jazz vocalists.
These expressions can be called up by simply playing the
keyboard or by using the Left Footswitch.

Expression examples via the Super
Articulation Voice
The following expressions can be produced by setting the
parameters of ARTICULATION (page 45) on page 2 of
the Voice Condition display.

Example: S-Nylon Guitar (type A)
When either of “ART.1” or “ART.2” is selected, pressing
the Left Footswitch will produce body-tapping sound.

Example: S-Steel Guitar (type B)
When “ART.1” is selected, playing the keyboard with the
Left Footswitch pressed will produce sound via picking
harmonics.

Example: S-ShooBeeDooBah/Hmm (type C)
When “ART.1” is selected, playing the keyboard with the
Left Footswitch pressed will produce a humming sound
while playing the keyboard with the Left Footswitch

Example: S-Alto Saxophone (type D)
When “ART.1” is selected, playing the keyboard with the
Left Footswitch pressed will bend the pitch up.
When “ART.2” is selected, playing the keyboard with the
Left Footswitch pressed will produce glissando.
When “AUTO” is set to ON, both the bend-up and
glissando are produced automatically by just playing the
keyboard.

2
Voices

The Electone features two types of tone generators: AWM
(Advanced Wave Memory) and VA (Virtual Acoustic).
AWM Voices are available on all Voice Sections except for
Lead Voice 2, while VA Voices (available only for the
ELS-02C) are available only on the Lead Voice 2 Section.

released will produce “Shoo,” “Bee,” “Doo,” and “Bah”
alternatively.

VA Voices
Unlike with AWM Voices, VA synthesis applies
sophisticated computer-based “physical modeling”
technology to musical sound synthesis. VA Voices in this
Electone offer many advantages in terms of musical
performance, not just in terms of sound, but also in terms
of the behavior that makes acoustic instruments so
musical.
Driver
– generates physical energy

Mouthpiece

Calculates the
speed of the
resonated air

Pipe/strings
– simulates resonation

Single-ended pipe
(saxophone)

Embouchure

Double-ended pipe
(flute)

Bow

Strings

VA synthesis simulates the very complex vibrations,
resonances, reflections and other acoustic phenomena
that occur in an actual wind or string instrument.

Notes on VA Voices
Since the VA Voices have unique sonic characteristics and
are closer in behavior to acoustic instruments than the
AWM Voices, you should observe the following
precautions when playing VA Voices.
• Some Voices may produce unexpected or unnatural
sounds when played outside (higher or lower than) the
recommended note range (pages 37 and 38).
• Pitch change may not be smooth on some Voices when
Horizontal Touch is applied.
• Portamento (Lead Slide) effects may not be smooth on
some Voices.
• Keep in mind that playing legato or trills may not
produce any sound.

ELS-02/ELS-02C Owner’s Manual

3 Organ Flutes (ELS-02C)
The ELS-02C has an Organ Flutes feature that allows you to create your own organ Voices, giving you access to
an unlimited combination of organ sounds. With this function, you can recreate all of the classic organ sounds
by adjusting the flute footage levels and the percussive sounds, just like on conventional organs. There are nine
flute footage settings, with three additional footage settings for the attack sound.

Press one of the Organ Flutes buttons
(UPPER or LOWER).

The lamp above the button lights and the Flute
Footage Levers appear on the display.
On the ELS-02, [U. ORGAN FLUTES] and
[L. ORGAN FLUTES] buttons are not active (Organ
Flutes does not function).
DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

Adjust flute footage settings (over a
range of 0 – 8).
The Flute footage levers can be adjusted by directly
touching the display.
The Data Control dial cannot be used. Play the
keyboard and listen to the changes in the sound as
you adjust the footage levels.

Press the [ATTACK/VOLUME] button in
the upper right on the display to adjust
the volume and Rotary Speaker settings.

ATTACK/VOLUME Page

L.ORGAN ROTARY SP
SPEED
FLUTES

FOOTAGE Page
1

1 ATTACK
Determines the level of each volume in the percussive
portion of the Voice. Footage settings are 4', 2-2/3' and 2'.
The LENGTH lever determines the duration of the attack
sound.

2 RESP. (Response)

Select the wave type for the Organ Flute
Voice.
Specifies the type of organ tone generation to be
simulated.
• SINE: Produces a clean, clear sound.
• VINTAGE: Produces a gritty, slightly distorted
sound.
• EURO: Produces the sound of the transistor
electronic organ equipped with the electronic
tremolo.

Determines the overall speed of the keyboard response.
Moving the lever downward makes the keyboard
response slower, creating a pipe organ effect.

3 MODE
Determines which notes in a held group of notes are
given an attack sound.
This parameter is common to both Upper and Lower
Organ Flute Voices.
• FIRST: Only the first note played will have attack. All
other notes played while the first is held have no attack.
• EACH: All notes played have an attack sound.

ELS-02/ELS-02C Owner’s Manual

4 REVERB

EFFECT Page

Determines the amount of reverb applied to the Organ
Flute Voice. When the panel REVERB control is set to the
minimum, the setting here will have no effect.
Reference page

• Reverb (page 46)

5 VOLUME

1 EFFECT TYPE

Press the [VIBRATO] button in the upper
right on the display, then set the related
parameters.

Selects the Rotary Speaker (tremolo) effect type. Press the
EFFECT TYPE button to call up a list of the effect types.
Select the desired type from the list.
To abort the operation, press the [CLOSE] button.

Organ Flutes (ELS-02C)

Determines the overall volume of the Organ Flute Voice.
The volume balance of the individual footages is
maintained. A minimum setting here produces no Organ
Flute sound.

Reference pages
• Effect List (page 54)
• Rotary Speaker (page 49)

VIBRATO Page

1 -1 1 -2 1 -3

1 VIBRATO
The Vibrato function wavers the level of the Voices,
making them sound warmer and more animated. This
effect is applied independently to each Voice section.

1 -1 ON/OFF
Turns on or off the Vibrato effect.

1 -2 DEPTH
Determines the intensity of the Vibrato effect.
Higher settings result in a more pronounced vibrato.
Range: 1 – 3
Select the desired effect type

1 -3 SPEED
Determines the speed of the Vibrato effect. Higher
settings increase the speed of the vibrato.
Range: 0 – 63

Press the [EFFECT] button at the top
right of the display for the Rotary
Speaker settings.

2 Effect Parameters
Effect parameters are displayed corresponding to the
selected effect type.

Press one of the Organ Flutes buttons
(UPPER or LOWER) to cancel the Organ
Flute function (the lamp above the
button turns off).

ELS-02/ELS-02C Owner’s Manual

4 Voice Controls and Effects
The Electone is equipped with two general kinds of functions that can be used to change the sound of the
Voices: Voice Controls and Effects. Each Voice has been given certain factory-preset effect settings to best
enhance its sound. However, if you wish, you can change the sound to suit your preferences by using the
controls and effects described in this section. All built-in effects are digital.
The chart below shows the various Voice controls and effects for the individual Voice sections. Available
functions are indicated by circles. The controls and effects are applied differently according to the different
types: independently for each Voice section, independently for each keyboard, or globally for the entire
system.

Selected from the display

Controls and Effects

Reference
page for
changing
the
settings

Voice sections to which the controls/effects are applied
Upper Keyboard
Upper
Keyboard
Voice 1, 2

Lead Voice

Organ Flute
Voice

Lead Voice
1, 2

Lower Keyboard
Lower
Keyboard
Voice 1, 2

Organ Flute
Voice

Pedalboard
Voice 1, 2

Pan

page 43



—



—



Touch Tone

page 43



—



—



Pitch

page 43



—



—



Feet

page 44



—



—



Reverb (send level)

page 44



Volume

page 44



Priority

page 44

—

*

—

Poly (Pedal
polyphonic mode)

page 44

—



Vibrato

page 44



—



—



Touch Vibrato

page 45



—



—



Lead Slide

page 45

—



—

Articulation Auto

page 45



—

**



—



Articulation Foot
SW Left

page 45



—

**



—



Transpose

page 46



—



—



Tune

page 46



—



—



Effect (1/2)

page 45



(Rotary
Speaker only)



(Rotary
Speaker only)

Reverb

page 46

Sustain

page 48

Brilliance

page 48

Rotary Speaker

page 49



Selected from
the panel

Pedalboard










—
—




—



*Priority is applied only for Lead Voice 2.
** Not available for VA Voices.

NOTE
Vibrato, Touch Vibrato, Slide, Articulation Auto, Articulation Foot SW Left and Sustain may not be available on some Voices.

ELS-02/ELS-02C Owner’s Manual

Settings Selected from the Voice Condition Display

3 TOUCH TONE

Settings Selected from the
Voice Condition Display

Voice Condition [Page 1]

3 -1 INITIAL touch
Controls volume and timbre according to the
velocity at which you play the keys. The harder you
play the keys, the greater the volume and the
brighter the timbre will become.
Higher settings make the change wider. Minimum
setting produces no effect.
Range: 0 – 14
NOTE

Initial Touch may not be effective on some organ Voices.
3

4
Voice Controls and Effects

Choose a Voice on the panel, then press the same button
on the panel again (or press the name of the selected
Voice in the display). The Voice Condition display
appears.
Voice Condition display for each Voice has five pages that
can be switched by pressing [1] – [5] buttons at the top
right of the display.

The Touch Tone function gives you expressive control
over the volume and timbre of a Voice. All Voices are
provided with this expressive function, making it possible
to perfectly reproduce the subtle dynamic and tonal
changes of actual instruments.
Two types of keyboard touch affect this function: Initial
Touch and After Touch.

3 -2 AFTER touch

3-1 3-2

4-1 4-2

NOTE

2
3

Controls volume and timbre according to the
pressure you apply to the keys after playing them.
The harder you press down on the keys, the greater
the volume and the brighter the timbre will become.
Higher settings make the change wider. Minimum
setting produces no effect.
Range: 0 – 14
• On the ELS-02, After Touch is not applied to the Pedal
Voices.

• After Touch has no effect on percussive Voices (such as
piano or vibraphone), percussion sounds, or some organ
Voices.

4 PITCH
3-1 3-2

4-2

In this display, you can adjust the basic Voice controls,
including panning, touch tone and volume. The displays
of the various Voice sections have slight differences in
their functions.

1 Voice Link
Lets you register the settings on the Voice Condition
display (except for Volume and Brilliance) to the Voice
Link Category as a Voice. The registered Voice can be
selected from the “Voice Link” category on the display
called up via the User buttons of all the Voice Sections.
For detailed instructions, see page 50.

2 PAN
Determines the position of the Voice in the stereo image.
Seven pan positions are available.

Controls pitch according to the playing style of
Horizontal Touch or After Touch. On some Voices in the
Lead Voice 2 section, not only pitch but also timbre may
be affected.

4 -1 HORIZONTAL touch (ELS-02C)
Controls the pitch by holding down the key and
moving it laterally (wiggling your finger from side to
side). The faster you move the key laterally, the faster
and greater the pitch change becomes, within a
range of +/- one octave. You can use this function in
combination with Touch Tone described above to
add expressiveness to your performance.
Higher settings result in a wider pitch change. The
minimum setting produces no effect. This function
is not available on the Pedalboard.
Range: 0 – 14
NOTE
Parameters that are available only on the ELS-02C are
indicated by a dark frame and background in their display
controls.

ELS-02/ELS-02C Owner’s Manual

Settings Selected from the Voice Condition Display

4 -2 AFTER touch
Controls the pitch according to the pressure you
apply to the keys after playing them.
The minimum setting produces no effect at all.
Higher (positive) settings make the pitch higher
according to the pressure and lower (negative)
settings make the pitch lower. The extreme settings
of +14 and -14 result in the widest pitch change.
Range: -14 – +14

Voice Condition [Page 2]
1 -1

1
3

3-1 3-2

4-1 4-2

5 FEET
Determines the octave setting of the Voice, letting you
use the Voice over a wide register. There are three
settings: 4', 8' and 16' (4' is highest and 16' is lowest). A 2'
setting is added to the Pedal Voice sections. PRESET is
the original (factory) setting.

6 REVERB
Determines the amount of reverb applied to each Voice
section. When the panel REVERB control is set to the
minimum, the setting here will have no effect.
See page 46 for details.

7 VOLUME
Fine adjustment of the Voice volume. See page 26 for
more information.

8 PRIORITY (only for the Lead Voice 2)
Determines the mode of Lead Voice 2, Last or Top.
• LAST: Only the last played key is sounded when two or
more keys are played simultaneously.
• TOP: Only the highest note is sounded when two or
more keys are played simultaneously. When the Solo
mode is on, Lead Voice 2 sounds according to Last
mode, regardless of the setting made here.

1-2 1-3

1-4

The items included in this page differ between the Lead
Voice sections and the other sections. SLIDE (3) only
applies to Lead Voice 1 and 2.

1 VIBRATO
The Vibrato function wavers the level of the Voices,
making them sound warmer and more animated. This
effect is applied independently to each Voice section. For
some Voices, vibrato may not be effective at all or the
effect may not sound as expected.

1 -1 PRESET/USER
Selecting PRESET calls up the original (factory)
vibrato settings for the Voice.
When PRESET is selected, DELAY, DEPTH and
SPEED parameters cannot be edited.
Selecting USER lets you adjust the vibrato settings
for yourself.
Vibrato Control
Speed
Delay
Depth

Reference page
• Solo function (page 27)

9 POLY (only for Pedal Voices)
Allows you to switch the pedal polyphonic mode on or
off. Setting POLY to on switches the normally
monophonic pedal Voices to polyphonic play. This makes
it possible to play the Pedalboard in various expressive
ways, such as playing legato or playing intervals and
chords.
Keep in mind that you cannot exceed the total maximum
polyphony: 14 notes for all sections, Upper, Lower and
Pedal.

1 -2 DELAY
Determines the amount of time that elapses between
the playing of a key and the start of the vibrato
effect. Higher settings increase the delay of the
vibrato onset.
Range: 0 – 14

1 -3 DEPTH
Determines the intensity of the vibrato effect.
Higher settings result in a more pronounced vibrato.
The minimum setting cancels the vibrato effect.
Range: 0 – 14

ELS-02/ELS-02C Owner’s Manual

Settings Selected from the Voice Condition Display

1 -4 SPEED

Voice Condition [Pages 3 and 4]

Determines the speed of the vibrato effect. Higher
settings increase the speed of the vibrato.
Range: 0 – 14

2 TOUCH VIBRATO

NOTE

Touch Vibrato is not applied to the Pedal Voices of the ELS-02.

3 SLIDE (only for Lead Voices)
Applies a portamento effect to notes played in legato. The
Slide function is effective within a one-octave range for
Lead Voices. Slide has no effect when playing notes
beyond a one-octave range.

You can edit the effect parameters from these two
displays. Both displays have the same contents. You can
select two effects for each Voice section with these
displays (Voice Condition Pages 3 and 4).

1 EFFECT 1 (Page 3)/EFFECT 2 (Page 4)

3 -1 ON/KNEE/OFF

Selects the effect category. Pressing the EFFECT button
on the display calls up the effect category list. Select the
desired effect category from the list.
To abort the operation, press the [CLOSE] button.

On/Off switch and knee lever selector for the Slide
effect.

• Effect List (page 54)

Reference page
• Controlling Lead Slide (with Knee Lever); (page 182)

Voice Controls and Effects

Turns the Touch Vibrato function on or off. Setting
Touch Vibrato to on lets you apply vibrato to individual
notes as you play them by after touch. The harder you
press down the key, the greater the vibrato will be. When
Touch Vibrato is off, vibrato depth cannot be controlled,
no matter how hard you press the keys.

Reference page

3 -2 TIME
Determines the speed of the slide or portamento
effect. Higher settings makes the slide speed slower.
Range: 0 – 14
NOTE
The parameters here are not available when a Super Articulation
Voice is selected.

4 ARTICULATION
The settings here, available only for Super Articulation
Voices, produce effects (such as pitch bend and
glissando) which are characteristic of the corresponding
acoustic instrument, making your keyboard performance
more realistic.

By selecting [PRESET] in the list, the original (factory)
effect category for the selected Voice is automatically set.
Selecting [THRU] bypasses the effect (no effect is added
to the selected Voice).

4 -1 AUTO

2 TYPE 1 (Page 3)/ TYPE 2 (Page 4)

Setting this to ON will apply various effects such as
pitch bend and glissando to your keyboard
performance.

Determines the type of the effect. Pressing the TYPE
button on the display calls up the effect type list,
corresponding to the selected effect category. Select the
desired effect type from the list.
To abort the operation, press the [CLOSE] button.
If you have selected the [PRESET] category, the effect
type cannot be edited.
After changing the effect type, the effect parameter below
is automatically changed corresponding to the selected
effect type.

4 -2 FOOT SW LEFT
Determines the effect produced via the Left
Footswitch: ART.1, ART.2 and OFF.
NOTE
For information about what effect is produced by setting
AUTO, ART.1 and ART.2 to ON, see “Super Articulation
Voice Supplementary List” on pages 34 – 36. As listed on
these pages, AUTO, ART.1 and ART.2 are not available for
some Voices.

ELS-02/ELS-02C Owner’s Manual

Selecting from the Panel

3 Effect Parameters
Effect parameters are displayed corresponding to the
selected effect type.

Voice Condition [Page 5]

Selecting from the Panel
The Reverb, Sustain, Brilliance and Rotary Speaker
displays are called up by pressing the respective buttons
on the panel.

Reverb
Reverb adds an echo-like effect to the sound, giving the
impression of a performance in a large room or concert
hall. You can adjust the reverb volume for each Voice
sections, or adjust the reverb volume for rhythm and
accompaniment separately.
1

1 TRANSPOSE
Changes the pitch in semitones for each Voice section.
Range is from -6 to +6.
Reference page

To adjust the reverb effect and call up
the Reverb pages:
Press one of the REVERB buttons, located to the left of
the panel, to set the Reverb effect. The Reverb display
appears.

• Transpose (for entire instrument); (page 184)
REVERB

2 TUNE

MAX

Determines the fine pitch settings (detune) for each Voice
section, producing a richer sound. Each step represents a
1-cent change in pitch.
Range: -64 – +63

MIN

Reference page
• Pitch (for entire instrument); (page 184)

The Reverb display consists of four pages.

REVERB [Page 1]

DEPTH:
Fine adjustment of the depth of reverberation or the level
of the reflected sounds. Coarse reverb depth settings are
made with the panel REVERB buttons. The REVERB
buttons let you make coarse adjustment in seven settings
to the reverb depth while the slider gives you fine control.
When this parameter or the panel REVERB control is set
to the minimum, the settings in the pages that follow
have no effect.
Range: 0 – 24

ELS-02/ELS-02C Owner’s Manual

Selecting from the Panel
NOTE

3 ORGAN (only for the ELS-02C)

Depending on the reverb depth value (set by the slider), two
adjacent REVERB button lamps may be lit at the same time,
indicating an intermediate position.

Determines the amount of reverb applied to the Organ
Flute Voice. This parameter corresponds to the REVERB
slider contained in the ATTACK/VOLUME Page of the
Organ Flute display.
On the ELS-02, this slider is not displayed.
Range: 0 – 24

REVERB [Page 2]

Reference page

• Organ Flutes (page 40)

Voice Controls and Effects

REVERB [Page 3]

1 TYPE
Determines the reverb type for each of the Voice sections
and the Organ Flute Voice.
Several types can be selected: Room, Hall, Stage, and so
on.
Pressing the TYPE button on the display calls up the
Reverb Type list.
Reference page
• Effect List (page 54)

Determines the amount of reverb effect applied to each
Voice section.
Each slider corresponds to the REVERB slider in Voice
Condition Page 1 of the respective Voices.
Range: 0 – 24

Press the number buttons to change the display pages.

REVERB [Page 4]

The list contains many reverb types, more than can fit on
one display page. To change the display pages, press the
appropriate number buttons [1] or [2] in the display.
Select the desired reverb type from the list.
To abort the operation, press the [CLOSE] button.
After changing the reverb type, the TIME parameter
below is automatically changed corresponding to the
selected reverb type.

1 TYPE
Determines the reverb type for rhythm, accompaniment,
keyboard percussion, and microphone signal.
Reference page
• Connecting a Microphone or Guitar (page 189)

2 TIME
Determines the reverb length for each of the Voice
sections and the Organ Flute Voice.
Higher settings make the reverb effect longer.
Range: 0.3s – 30.0s

2 TIME
Determines the length of reverb applied to the rhythm,
accompaniment, keyboard percussion, and microphone
signal.
Range: 0.3s – 30.0s

ELS-02/ELS-02C Owner’s Manual

Selecting from the Panel

3 RHYTHM

SUSTAIN LENGTH display

Determines the amount of reverb applied to the rhythm
(with PERCUSSION slider) and accompaniment (with
ACCOMPANI. slider). Each slider corresponds to the
REVERB slider in the Rhythm Condition display.
Range: 0 – 24
Reference page
• Changing the rhythm reverb (page 60)

4 KEYBOARD PERCUSSION
Determines the amount of reverb applied to the
Keyboard Percussion.
Range: 0 – 24
Reference page
• Keyboard Percussion (page 68)

To adjust the sustain length value, use the display slider. If
you set the highest value (HOLD), some Voices such as
organ or synth will sound continuously even when the
keys are released.
Range: 0 – 12, HOLD
NOTE

Sustain

• If you change the Voice when the sustain length is set to HOLD
and the keys are released, the Voice only changes after you play
another key.

The sustain effect, selectable for each Voice section,
causes Voices to gradually fade out when the keys are
released. The sustain on/off and sustain length settings
are independent for each keyboard, providing maximum
expressive control.
The Knee Lever can also be used to switch the sustain on/
off. Sustain cannot be applied to the Lead Voices.
Reference page
• Knee Lever (page 180)

To add sustain to the Voices and call up
the Sustain Length display:
Press one of the SUSTAIN buttons, located to the left of
the panel, to set the sustain. The SUSTAIN LENGTH
display appears.

• When the sustain length is set to HOLD, previously played note(s)
may be cut off by subsequently played notes.
• The minimum setting results in no sustain. Turning sustain off
automatically resets the sustain length to be the default setting.
• Only “HOLD” is available for the Voices listed below. No effect is
produced when a value of 0 – 12 is set.

S-Violin 1/ 2
S-Trumpet 1/2
S-Trombone
S-Flute
S-Flute Flutter
S-Clarinet 1/2
S-Alto Sax
S-Alto Sax Growl

S-Tenor Sax 1/2/3
S-TenorSax Growl
S-Soprano Sax
S-SprnoSax Growl
S-Harmonica
S-BluesHarp
S-Pan Flute 1/2
S-Irish Pipe 1/2

• If the pedal Voice using a Super Articulation Voice (excepting
S-Piano 1/2) is played when the sustain length is set to HOLD, the
Voice sound which is played earlier continues to sound without
being cut off, regardless of whether Pedal Poly (page 44) is set to
on or off.

SUSTAIN
UPPER
(KNEE)

Brilliance
LOWER
(KNEE)

PEDAL

The lamp of the button lights up to indicate that sustain is
on. Press the button again to turn sustain off and the
lamp turns off. When the lamp is off, sustain does not
affect the corresponding keyboard.
Remember to check whether the sustain button lamps are
on or off before you start to play.

ELS-02/ELS-02C Owner’s Manual

Adjustment of the Voice tone, brighter or mellower.
Press the BRILLIANCE buttons of each Voice section on
the panel to set the desired brilliance for each Voice.
The buttons have seven brilliance settings.
UPPER KEYBOARD VOICE 1

BRILLIANCE

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

VOLUME

BRILLIANT

MAX

MELLOW

MIN

Selecting from the Panel

DISPLAY SELECT

Rotary Speaker
Rotary Speaker recreates the rich, swirling sound of the
popular rotating speaker effect.
The Rotary Speaker effect can be switched in real time as
you play, with either the front panel button or the Left
Footswitch (when properly set for Footswitch operation).
Keep in mind that the Rotary Speaker effect CANNOT be
turned on only by turning on the [ROTARY SP SPEED]
button. To properly use the Rotary Speaker effect, follow
the procedure below.

Select the Rotary Speaker effect from
the desired Voice.

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

ROTARY SPEAKER display

When you want to set Rotary Speaker to one of the
Voice sections, you can select the effect category of
Rotary Speaker in the Voice Condition display
Page 3 or 4. See page 45 for details.

4
Voice Controls and Effects

VOICE
DISPLAY

Select “Rotary Speaker” here.

1 SPEED
Determines the speed of the speaker rotation.
Range: 2.69Hz – 39.7Hz

2 MODE
When you want to set Rotary Speaker for the Organ
Flute Voice, select the effect type in the EFFECT
Page. See page 41 for details.
Select an effect type other than [OFF].

Determines the slow/stop mode when [ROTARY SP
SPEED] button is off. If [SLOW] is selected, a slow
chorus effect is applied when you turn off the button on
the panel.
If [STOP] is selected, the Rotary Speaker effect turns off
when you turn off the button on the panel.

Once the Rotary Speaker effect has been turned on
and set, you can control the effect in real time from
the panel or from the Left Footswitch.

3
2

Adjust the rotating speed and mode of
the Rotary Speaker.

Control the Rotary Speaker effect from
the panel or from the Left Footswitch.
You can control Rotary Speaker on/off not only from
the panel but also the Left Footswitch, if the
Footswitch has been properly assigned. See page 180
for details.

Press the [ROTARY SP SPEED] button on the panel.
The ROTARY SPEAKER display appears. The
settings in this display are common to all Voice
sections.

ELS-02/ELS-02C Owner’s Manual

Using Voice Link

The settings will be registered, then the Voice Link
indication (chain link icon) appears at right of the
Voice name on the display.

Using Voice Link

Registering a Voice with the
settings on the Voice Condition
display to Voice Link
You can register the current Voice with the current
settings (except for Volume and Brilliance) on the Voice
Condition display to the Voice Link category as a Voice.

This Voice Link indication in the Voice name will be
shown also on the Voice Display, enabling you to
confirm which Voice Section uses Voice Link.

Make the desired settings on the Voice
Condition display.
Here, set the FEET to “4'.”

This chain link icon appears when the corresponding
Voice is registered as a Voice Link.

At the left top on the display, press the
[LINK] button.

NOTE
When the same Voice has already been registered to Voice
Link, the [REGISTER] button in step 3 is grayed out and
cannot be used. If this occurs, press the [RENAME]
button, assign a different name to the current Voice, then
register the Voice to Voice Link again. For details, see
page 52. If you want to overwrite the current Voice with the
same Voice name to Voice Link, see page 51.

Selecting a Voice registered to
Voice Link

Press the [REGISTER] button on the
display.

Press a User button in the desired Voice
Section.
UPPER KEYBOARD VOICE 1

BRILLIANCE

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

MAX

MELLOW

MIN

User buttons

ELS-02/ELS-02C Owner’s Manual

VOLUME

BRILLIANT

Using Voice Link

Press the Voice Link Category from the
Voice Categories at the right top on the
display, then press the desired Voice
name, for example “Strings 2” here.
Voice Categories

Voice Link

Releasing the current Voice
settings from Voice Link
When you want to change the Voice Condition settings of
the Voice already registered to Voice Link without
affecting the sound of another Voice Section and another
Registration Memory number, you should release the
Voice from Voice Link, then register the settings to Voice
Link with a different Voice name by following the
instructions on page 52.

From the Voice Link Category display,
select the Voice to be released from
Voice Link.

Editing the Voice registered to
Voice Link

Voice Controls and Effects

If you change the settings on the Voice Condition display
of the Voice in Voice Link, storing to the Registration
Memory will apply the changed new settings to all
Registrations which use the same Voice in Voice Link.

1
2

Select a Voice in Voice Link, call up the
Voice Condition display, then make the
desired settings.

Press the [LINK] button on the display.

Press the [OK] button.

Store the panel settings to a
Registration Memory button by
following the instructions on page 95.

NOTE
• When you save the Song or Unit next time, the settings of the
Voice Condition display will be applied to all the Units.
• When you want to change the Voice Condition settings of the
Voice already registered to Voice Link without affecting the sound
of another Voice Section and another Registration Memory
number, you should release the Voice from Voice Link (see next
topic), then register the settings to Voice Link with a different Voice
name (page 52).

The current Voice is now released from Voice Link.

ELS-02/ELS-02C Owner’s Manual

Using Voice Link

The settings will be registered, then the Voice Link
indication appears at right of the Voice name on the
display.

Registering a Voice to Voice Link
with a different Voice name
This section covers how to register the current Voice to
Voice Link with a different Voice name.

After pressing the [LINK] button on the
display, press the [RENAME] button on
the dialog window.

Deleting a Voice from Voice Link

Change the Voice name, then press the
[OK] button.

Since there is a limit to the number of Voices that can be
registered to Voice Link, you may want to delete
unnecessary Voices from Voice Link if the amount of
registered Voices comes close to 80.
The delete operation can be executed in any Voice
Section.

From the Voice menu in the Voice Link
category, select a Voice to be deleted.

Reference page
• Changing the Song Name (page 116)

Press the [REGISTER] button on the
dialog window.

ELS-02/ELS-02C Owner’s Manual

Press the [DELETE] button on the
display.

Using Voice Link

Press the [OK] button on the dialog
window.

4
Voice Controls and Effects

The selected Voice is now deleted from Voice Link.

When you press the Registration Number button
containing data using a Voice registered to Voice Link,
the corresponding Voice and its settings on the Voice
Condition display will be called up from its original Voice
Category (not from Voice Link). This means that the
Voice will sound the same as when the Voice settings
were stored to the Registration Memory, regardless of
changes made in the operation here.

ELS-02/ELS-02C Owner’s Manual

Effect List

Effect List
REVERB
HALL 1

HALL 2

HALL 3

HALL M

HALL L

XG HALL 1

XG HALL 2

ROOM 1

ROOM 2

ROOM 3

ROOM 4

ROOM S

ROOM M

ROOM L

XG ROOM 1

XG ROOM 2

XG ROOM 3

STAGE 1

STAGE 2

XG STAGE 1

XG STAGE 2

PLATE 1

PLATE 2

XG PLATE

GM PLATE

WHITE ROOM

ATMO HALL

ACOSTIC ROOM

DRUMS ROOM

PERC ROOM

TUNNEL

CANYON

BASEMENT

XG DLY LCR

DELAY LR

ECHO

CROSS DELAY1

TEMPO ECHO

TEMPO CROSS1

GATE REVERB2

REVERS GATE

XG CHORUS 2

XG CHORUS 3

DELAY
DELAY LCR
CROSS DELAY2

TEMPO DELAY1

TEMPO DELAY2

TEMPO CROSS2

TEMPO CROSS3

TEMPO CROSS4

ER 1

ER 2

GATE REVERB1

KARAOKE 1

KARAOKE 2

KARAOKE 3

CHORUS 2

XG CHORUS 1

ER/KARAOKE

CHORUS
CHORUS 1
XG CHORUS 4

GM CHORUS 1

GM CHORUS 2

GM CHORUS 3

GM CHORUS 4

FB CHORUS

CHORUS FAST

CHORUS LITE

AMB CHORUS

CELESTE 1

CELESTE 2

CELESTE 3

CELESTE 4

AMB CELESTE

SYMPHONIC

XG SYMPHONIC

AMB SYMPHO

ENS DETUNE 1

ENS DETUNE 2

FLANGER
FLANGER 1

FLANGER 2

XG FLANGER 1

XG FLANGER 2

XG FLANGER 3

GM FLANGER

V_FLANGER

TEMP FLANGER

DYNA FLANGER

VIN FLANGER1

VIN FLANGER2

AMB FLANGER

PHASER 3

EP PHASER 1

EP PHASER 2

PHASER
PHASER 1

PHASER 2

EP PHASER 3

TEMP PHASER1

TEMP PHASER2

DYNA PHASER

VIN PHASER 1

VIN PHASER 2

VIN PHSR ST1

VIN PHSR ST2

VIN PHSR ST3

VIN PHSR ST4

TREMOLO 1

TREMOLO 2

XG TREMOLO

EP TREMOLO

GT TREMOLO 1

GT TREMOLO 2

ORG TREMOLO

VIBE VIBRATE

T_TREMOLO

AUTO PAN

XG AT PAN 1

XG AT PAN 2

EP AUTO PAN

T_AUTO PAN 1

T_AUTO PAN 2

ROTARY SP 1

ROTARY SP 2

ROTARY SP 3

ROTARY SP 4

TREMOLO/AUTO PAN

ROTARY SPEAKER
XG ROTARY SP
ROTARY SP 5

2WAY ROT SP

DUAL ROTSP 1

DUAL ROTSP 2

DUAL ROT BRT

DUAL ROT WRM

DIST+ROT SP

ODRV+ROT SP

AMP+ROT SP

DIST+2ROT SP

ODRV+2ROT SP

AMP+2ROT SP

DISTORTION

DIST HARD 1

DIST HARD 2

DIST SOFT 1

DIST SOFT 2

ST DIST HARD

ST DIST SOFT

OVERDRIVE

ST OVERDRIVE

XG DIST

XG ST DIST

V_DIST HARD

V_DIST SOFT

COMP+DIST

XG CMP+DIST

V_DIST WARM

V_DIST CLS H

V_DIST CLS S

V_DIST METAL

V_DIST CRUNC

V_DIST BLUES

V_DIST EDGY

V_DIST SOLID

V_DIST CLN 1

V_DIST CLN 2

V_DIST TWIN

V_DIST ROCA

V_DST JZ CLN

V_DST FUSION

ELS-02/ELS-02C Owner’s Manual

Effect List

DISTORTION+
DIST+DELAY

ODRV+DELAY

XG DIST+DLY

XG ODRV+DLY

CMP+DIST+DLY

CMP+ODRV+DLY

XG CMP+DT+DL

XG CMP+OD+DL

V_DIST H+DLY

V_DIST S+DLY

DIST+T DLY

ODRV+T DLY

CMP+DST+TDLY

CMP+OD+TDLY1

CMP+OD+TDLY2

CMP+OD+TDLY3

CMP+OD+TDLY4

CMP+OD+TDLY5

CMP+OD+TDLY6

VDST H+TDLY1

VDST H+TDLY2

VDST S+TDLY1

VDST S+TDLY2

AMP SIMULATOR
XG AMP SIM

ST AMP SIM 1

ST AMP SIM 2

ST AMP SIM 3

ST AMP SIM 5

XG ST AMP

ST AMP SOLID

ST AMP CRUNC

ST AMP BLUES

ST AMP CLEAN

ST AMP HARP

SML ST DIST

SML ST OVRDR

SML ST VINTG

SML ST HEAVY

B CMB CLASC

B CMB TOPBST

B CMB CUSTOM

B CMB HEAVY

B LGND BLUES

B LGND HVY1

B LGND HVY2

B LGND CLEAN

B LGND D CLN

US CMB TWIN

USCMB RCH CL

USCMB THN CL

USCMB CRUNCH

JZ CMB BASIC

JZ CMB WARM

US HI GN DTY

US HI GN RIF

US HIGN BURN

US HIGN SOLO

B LD DIRTY

B LD DRIVE

B LD GAINER

B LD HARD

AUTO WAH

XG AUTO WAH

V_AUTO WAH

TOUCH WAH 1

TOUCH WAH 2

TOUCH WAH 3

V_TOUCH WAH

AT WAH+DIST

XG AT WH+DST

AT WH+DST HD

WAH

AT WH+DST HV

AT WH+DST LT

AT WAH+ODRV

XG AT WAH+OD

AT WH+OD HD

AT WH+OD HV

AT WH+OD LT

TC WAH+DIST

XG TC WH+DST

TC WH+DST HD

TC WH+DST HV

TC WH+DST LT

TC WAH+ODRV

XG TC WAH+OD

TC WAH+OD HD

TC WAH+OD HV

TC WAH+OD LT

CLAVI TC WAH

EP TOUCH WAH

WAH+DST+TDLY

WAH+OD+TDLY1

WAH+OD+TDLY2

WAH+DIST+DLY

XG WH+DST+DL

WAH+ODRV+DLY

XG WH+OD+DLY

TEMPO AT WAH

T_A.WH+DST

T_A.WH+DSTHD

T_A.WH+DSTHV

T_A.WH+DSTLT

T_A.WH+ODRV

T_A.WH+OD HD

T_A.WH+OD HV

T_A.WH+OD LT

M BAND COMP

COMPRESSOR

COMP MED

COMP HEAVY

COMP MELODY

COMP BASS

V_COMPRESSOR

NOISE GATE

ST 2BAND EQ

ST 3BAND EQ

XG 3BAND EQ

EQ DISCO

EQ TEL

HM ENHANCER

XG HM ENHNCE

4
Voice Controls and Effects

AMP SIM
ST AMP SIM 4

DYNAMIC

EQ/ENHANCER

PITCH CHANGE
PITCH CHANGE

XG PCH CHG 1

XG PCH CHG 2

MISCELLANEOUS
AMBIENCE

IMPULSE EXP

RESONATOR

VOICE CANCEL

TALKING MOD

LO-FI

DYNA FILTER

DYNA RINGMOD

RING MOD

ISOLATOR

LOOP FX1

LOOP FX2

LO-FI DRUM1

LO-FI DRUM2

LO-FI DRUM3

LO-FI DRUM4

DAMPER RESO

THRU
THRU

NOTE
Damper Resonance (DAMPER RESO) can be applied only when Sustain is turned on. For information on turning Sustain on, see
page 48.

ELS-02/ELS-02C Owner’s Manual

5 Rhythm/Keyboard Percussion
This Electone features more than 600 different real rhythms featuring actual drum and percussion sampled
sounds. Automatic Accompaniment functions are used with the rhythms, providing appropriate and
completely automatic accompaniment to match the style of the selected rhythm. Moreover, the Electone has a
Keyboard Percussion feature that allows you to play drum and percussion sounds from the Upper, Lower
keyboard and Pedalboard.
KEYBOARD
PERCUSSION

SEQ.

RHYTHM

VOLUME
MAX

MARCH

WALTZ

SWING&
JAZZ

POPS

R&B

LATIN

WORLD
MUSIC

BALLAD

ROCK

DANCE

2
MIN

TEMPO

BAR / BEAT

Rhythm/Keyboard Percussion
TEMPO

INTRO

ENDING

SYNCHRO
START

START

RHYTHM
CONTROL

BREAK

MAIN / FILL IN

Selecting Rhythms with
the Rhythm Buttons
You can instantly select a rhythm from more than 600
rhythms with the ten rhythm buttons on the front panel.

Select the desired rhythm name from
the Rhythm menu.
The Rhythm menu contains many Pops rhythms,
more than can fit on the display page. To change the
display pages, press the appropriate number buttons
in the display.

Selecting a rhythm
In the explanation below, 16Beat 1 in the POPS category
is selected as an example.

Press one of the Rhythm buttons in the
RHYTHM section on the front panel (for
example, the [POPS] button).
RHYTHM

VOLUME
MAX

SEQ.

MARCH

WALTZ

SWING&
JAZZ

POPS

R&B

LATIN

WORLD
MUSIC

BALLAD

ROCK

DANCE

2
MIN

Rhythm buttons

The relevant Rhythm Menu is displayed.

ELS-02/ELS-02C Owner’s Manual

The color of the selected rhythm name changes to
orange, indicating that it has been selected.

Selecting Rhythms with the Rhythm Buttons

Rhythm structure

ENDING

Each rhythm is made up of “sections.” Since each
section is a rhythmic variation of the basic rhythm,
you can use them to add “spice” to your performance
and mix up the beats while you are playing. You can
freely change the section while the rhythm is played
back.

This is used for the ending of the Song. There are three
Ending sections that can be selected with the ENDING [1] –
[3] buttons. When the ending is finished, the rhythm
automatically stops.
ENDING

INTRO

Selected Ending section’s lamp is lit

This is used for the beginning of the Song. There are three
Intro sections that can be selected with the INTRO [1] – [3]
buttons. When the Intro finishes playing, the rhythm
automatically shifts to the Main section.
INTRO

Operating the rhythm from the
panel

Selected Intro section’s lamp is lit

MAIN
This is used for playing the main part of the Song. There are
four Main sections that can be selected with the MAIN/FILL
IN [A] – [D] buttons. The rhythm pattern of several
measures repeats indefinitely.

You can turn the rhythm on/off and switch the sections as
desired by pressing the buttons on the panel. Using the
Fill Ins and Break patterns let you add dynamic interest
and “spice” to your performance.

To start/stop the rhythm:

Rhythm/Keyboard Percussion

MAIN / FILL IN

START
SYNCHRO
START

START

Selected Main section’s lamp is lit

FILL IN
This is designed for use as a temporary and regular
rhythmic pattern to spice up a repeating rhythm. There are
four Fill In sections that can be played by pressing the
selected (lit) MAIN/FILL IN [A] – [D] buttons as desired.
When one measure pattern of a Fill In finishes playing, the
rhythm automatically shifts to the Main section.

The rhythm begins as soon as the [START] button is
pressed.
To stop the rhythm, press the button again.

SYNCHRO START
SYNCHRO
START

MAIN / FILL IN

Selected Fill In section’s lamp flashes

BREAK
This lets you add dynamic variations and breaks in the
rhythm pattern. The Break section is selected by pressing
the [BREAK] button. When the one-measure Break pattern
finishes playing, the rhythm automatically shifts to the Main
section.
SYNCHRO
START

START

BREAK

The lamp is lit when the Break section is selected

The [SYNCHRO START] button puts the rhythm in
“standby.” The rhythm starts when you press a note on
the Lower keyboard or Pedalboard.
When the A.B.C. mode is set to OFF, pressing the
[SYNCHRO START] button again stops the rhythm.
When the A.B.C. mode is set to something other than
OFF, releasing the key from the Lower keyboard stops the
rhythm.
When the A.B.C. mode is set to Custom A.B.C., releasing
the keys both from the Lower Keyboard and the
Pedalboard stops the rhythm.
Reference page
• Automatic Accompaniment – Auto Bass Chord (A.B.C.)
(page 66)

ELS-02/ELS-02C Owner’s Manual

Selecting Rhythms with the Rhythm Buttons

To use the Fill In patterns:

INTRO
INTRO

As you play the Electone along with the rhythm,
occasionally press the selected MAIN/FILL button as
desired. A Fill In pattern of one measure will be played
and the selected Fill In section’s lamp (above the button)
flashes.

Pressing one of the INTRO [1] – [3] buttons
automatically adds a short introduction before starting
the actual (Main) rhythm.
First press one of the INTRO [1] – [3] buttons, then press
the [START] or [SYNCHRO START] button to actually
start the rhythm.
While the introduction is playing, the BAR/BEAT display
shows the countdown to the first measure of the pattern.
For example, if there is a four-measure lead-in for a
pattern in 4/4 time, the display at right appears:

NOTE
You can record the currently selected section to Registration
Memory. However, you cannot record the on/off status of the
Auto Fill In function.

When you use the Auto Fill In function, Fill Ins will be
played automatically. The Auto Fill In function is set in
the Rhythm Condition display.
Pressing the selected Rhythm button on the panel again
(or pressing the rhythm name of the selected rhythm in
the display) calls up the Rhythm Condition display.

BAR / BEAT

TEMPO

NOTE
When an Intro or Ending pattern is playing, the Lower Keyboard
cannot be played.

ENDING
ENDING

When Auto Fill is set to ON in the left side of the display,
the Fill In pattern is automatically played whenever you
switch the Main sections.

Pressing one of the ENDING [1] – [3] buttons
automatically adds an ending phrase before stopping the
rhythm.
When you press the Ending button while rhythm is
playing back, the rhythm will automatically stop after the
ending phrase is played. You can have the ending
gradually slow down (ritardando) by pressing the
ENDING button once again, while the ending is playing.

To use the Break patterns:
As you play the Electone along with the rhythm,
occasionally press the [BREAK] button.
SYNCHRO
START

START

BREAK

NOTE
Pressing the ENDING [1] button during playback of the Main
section will first call up the Fill In pattern, then the Ending 1
pattern.

To switch the rhythm sections:
You can change the rhythm section of the Main phrase by
pressing the desired MAIN/FILL IN [A] – [D] button.
The selected section’s lamp (above the button) is lit.
MAIN / FILL IN

ELS-02/ELS-02C Owner’s Manual

Moreover, you can start/stop the rhythm and switch the
sections by using the Footswitch. See page 179 for details.

Selecting Rhythms with the Rhythm Buttons

Changing the rhythm volume

Adjusting the tempo

There are two ways to set the rhythm volume: using the
VOLUME buttons on the panel and using the volume
slider in the display. The volume buttons let you make
coarse adjustments to the volume while the slider gives
you fine control.

Turn the TEMPO dial clockwise to increase the tempo,
and counter-clockwise to decrease it.
Decreasing
the tempo

TEMPO

Increasing
the tempo

TEMPO Indicator
BAR / BEAT

Using VOLUME buttons on the panel
(coarse):

RHYTHM

VOLUME

TEMPO display shows the current tempo. Displayed
values are given in beats per minute.
The tempo range is 40 to 240 beats per minute.
When the rhythm begins playing, the TEMPO indicator
changes function to a BAR/BEAT indicator.
BAR/BEAT Indicator

MAX

SEQ.

MARCH

LATIN

WALTZ

WORLD
MUSIC

SWING&
JAZZ

POPS

BALLAD

ROCK

R&B

DANCE

BAR / BEAT

2
TEMPO
MIN

5
Rhythm/Keyboard Percussion

Press one of the VOLUME buttons of the rhythm on the
panel to set the desired level.
The buttons have seven volume settings, from a
minimum of 0, or no sound, to a maximum of full
volume.

TEMPO

Bar (measure) Beat

Using VOLUME slider in the display
(fine):
Pressing the same rhythm button on the panel again (or
pressing the rhythm name of the selected rhythm in the
display) calls up the Rhythm Condition display.

On the BAR/BEAT indicator, the number on the left
indicates the current bar or measure and the one on the
right indicates the number of the beat in each bar.
You can also see the Tempo and Bar/Beat indications in
the Voice Display. In the Voice Display, both Tempo and
Bar/Beat can be seen in one display.
DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

To set the volume, touch the PERCUSSION VOLUME
slider in the display or use the Data Control dial. The
control range is from 0 (no sound) to 24 (full volume).
NOTE
Depending on the volume value (set by the slider), two adjacent
VOLUME button lamps may be lit at the same time, indicating an
intermediate position.

ELS-02/ELS-02C Owner’s Manual

Selecting Rhythms from the User Buttons
Reference page
• Voice Display (page 17)

Each rhythm has its original (preset) tempo. Press
[PRESET TEMPO] button in the display to restore the
tempo to the original setting.

Selecting Rhythms from
the User Buttons
As with the Voice sections, the Rhythm section also has
User buttons (numbered 1 or 2) from which rhythms can
be selected. You can select original User rhythms that you
have created with the Rhythm Pattern Program function.
This also allows you to assign two or three rhythms from
the same category to be selected from different buttons;
one from the original Rhythm button, and the others
from the User buttons.

Press one of the User buttons at the
right of the Rhythm buttons.
RHYTHM

VOLUME
MAX

SEQ.

MARCH

WALTZ

SWING&
JAZZ

POPS

R&B

LATIN

WORLD
MUSIC

BALLAD

ROCK

DANCE

Changing the rhythm reverb
You can adjust the amount of reverb applied to the
rhythms and the percussion sounds used in the rhythms
in the Rhythm Condition display.
To adjust the amount of reverb, touch the slider in the
display or use the Data Control dial.
Reference page

MIN

User buttons

The Rhythm Menu appears in the display.

• Reverb (page 46)

Select the desired rhythm category with
the category buttons in the display.
You can also choose the “User” category to select a
User rhythm you have created.
Reference page
• Rhythm Pattern Program (page 146)

The currently selected rhythm category appears in
small letters above of the rhythm buttons in the
display. Keep in mind that the rhythm name shown
above the category name is that of the currently
assigned rhythm and is irrelevant to the rhythm
category.
Currently selected rhythm name

When the panel REVERB control is set to the minimum,
the setting here will have no effect.
Range: 0 – 24

Currently selected rhythm category

Select a rhythm from the displayed
Rhythm Menu.
Use the number buttons in the display to call up
other rhythms in the category.

ELS-02/ELS-02C Owner’s Manual

Rhythm List

Rhythm List
This list shows all available rhythms on the Electone. Numbers written at the left side of each column in this
list indicate the numbered buttons displayed in the Rhythm Menu.
MARCH
1

2
*2

Jazz Waltz 2

Simple 6/8 March

Jazz Waltz 3

Jungle Drum
3

Medium Jazz 1
Medium Jazz 2

Jazz Waltz Fast

Acoustic Jazz 1

German March

Modern Waltz

Acoustic Jazz 2

6/8 March 1

Pop Waltz

Fast Jazz

Country Waltz

Combo Swing

Mariachi

Cool Combo

OrchestralMarch+

Banda Vals

Light Swing

Anime Fantasy +

Snow Waltz

InstrumentalJazz

Galaxy Ship

Vocal Waltz

Manhattan Swing

SF March 1

Alpine Waltz

SF March 2 +

Jazz Club

AlpenLand 3/4

Bebop

Scand Hambo

Five-Four

Broadway

Highland Waltz

Trad Piano Jazz

Showtune +

Musette

Piano Trio

Italian Mazurka

Jazz Ballad 1

Italian Waltz

Jazz Ballad 2

French Waltz

Midnight Swing

Movie Soundtrack

Slow Jazz

Blockbuster

Wild West
Pop Classics +

*1, *2

French 50s
4

Alpine March
6/8 Organ March

Choir Soundtrack

Moonlight 1

Pub Piano

OrchestraBolero+

Sing-a-longPiano

Romantic Waltz

*3
*3

Moonlight 2
Dreamy Ballad

Piano March

*2, *3

Classical Menuet

Piano 6/8 March

*2, *3

Green Fantasia

*2, *3

Winter Song 2

Piano Musical

*2, *3

Guitar Serenade

*2, *3

ChristmasShuffle

Baroque

Piano Jazz Waltz

*2, *3

ChristmasBallad+

Baroque Air

Baroque Concerto

Strings Adagio

Strings Concerto

ClassicalSerenad
Choral Symphony

Winter Song 1

Movie Swing 2

SWING&JAZZ

Guitar Swing

Simple Big Band

Afro Cuban 1

Simple ComboJazz

Afro Cuban 2

Simple Swing

Afro Cuban 3
6

Foxtrot 1

*2, *3

Big Band 1

Brass Band Hymn+

*1, *3

Big Band 2

Foxtrot 2

Big Band 3

Slowfox 1

Big Band 4

Slowfox 2

Big Band 5

Dixieland 1

Big Band 6

Dixieland 2

Big Band 7

Dixieland Jazz 1

Orch Big Band 1

Dixieland Jazz 2

Vienna Waltz 1

Orch Big Band 2

Ragtime 1

Vienna Waltz 2

Big Band Jazz

Ragtime 2

Vienna Waltz 3

Big Band Fast

Charleston

Gentle Waltz 1

Classic Big Band

Gentle Waltz 2

30s Big Band

Classic Waltz

Modern Big Band

Jazz Singers

Slow Waltz

Mod BigBand Shfl

Tap Dance Swing

WALTZ
Simple Waltz
Orchestral Waltz

Movie Swing 1

Romantic Ballet

Waltz

5
Rhythm/Keyboard Percussion

6/8 Kids

Movie Panther

Jazz Waltz Med

6/8 March 2

Big Band Bop

Marching Band 3

Marching Band 2

Jazz Waltz 4

Marching Band 1

Jazz Waltz 1

Simple March

Quickstep
7

Orchestra Swing

*1 Cannot be selected for creating a Rhythm Pattern Program.
*2 Contains a Section with no Auto Bass part. Such a Section cannot produce the bass sound even if A.B.C. is turned on.
*3 Contains a Section with no Drum part. When playing such a Section, make sure to turn Accompaniment on.

ELS-02/ELS-02C Owner’s Manual

Rhythm List

Organ Groove
Piano Swing

*2, *3

60s Chart Swing

New R&B

Piano Stride

*2, *3

Bubblegum Pop

Worship Medium

Tijuana

Worship Fast +

70s 8Beat

Worshp Power Bld

70s Country Pop

Piano Blues 1

*2, *3

Piano Blues 2

*2, *3

Simple 8Beat Pop

70s ChartCountry

Simple 3/4 Pop

Country Brothers

Simple Shffl Pop

Euro Pop Organ

8Beat Light 1

Euro Fox

8Beat Light 2

Euro Pop

8Beat Light 3

Piano 8Beat

8Beat Light 4

Simple Mambo

Simple Shuffle 1

Simple Rumba

Simple Shuffle 2

R&B

Simple Shuffle 3

1
*2, *3

Bossa Nova 1
Simple Funk

Bossa Nova 2

16Beat 1

Simpl R&B Ballad

Bossa Nova 3

16Beat 2

Simple R&B Shffl

Bossa Nova 4

16Beat 3

Soul 1

Pop Bossa 1

16Beat 4

Soul 2

Pop Bossa 2

British 16Beat 1

16Beat Soul 1

Bossa Brazil

British 16Beat 2

16Beat Soul 2

Guitar Pop

Soul Brothers

Classic 16Beat

Frankly Soul

16Beat Shuffle 1

Live Soul Band +

16Beat Shuffle 2

70s Chart Soul

Light Samba 2

Soul Swing

Pop Samba 1

6/8 Soul

Pop Samba 2

Folk Rock 1

Lounge Bossa
2

Samba
Big Band Samba

Light Samba 1

Amazing Gospel 1

Jazz Samba

Folk Rock 2

Amazing Gospel 2

SingerSongWriter

Gospel Brothers

Mambo 2

Easy Pop

Gospel Sisters

Big Band Mambo

Hollywood Gospel

Rumba

60s 8Beat

Gospel Party

Pop Rumba

80s Boy Band

New Gospel

Fast Rumba

Surfin' 8Beat

Gospel Shuffle

Rumba Flamenco

Gospel Funk 1

Cha Cha Cha

Finger Pickin'

Gospel Funk 2

Big Band Cha Cha

Jazz Pop

Funk Beat 1

Pop Cha Cha 1

Eurovision Pop

Funk Beat 2

British Pop

Jazz Funk

Pop Shuffle

Kool Funk +

Kool Shuffle

Let's Funk

Salsa 3

Motor City 1

Montuno

Unplugged 2

Motor City 2

Calypso

Unplugged 3

Detroit Pop 1

Guaguanco

JPN Pop Shuffle

Detroit Pop 2

Danzon

Unplugged 1

JPN Idol Hits
JPN 70s Anime +

4
*1

Pop Cha Cha 2
4
*1

Salsa 1
Salsa 2

Blues Rock
Blueberry Blues+

Mambo 1

Guajira
*1

Cuban Bolero

JPN Soundtrack

Cool Blues

Cute Pop

Slow Blues

The 3rd Funk

Blues Shuffle 1

Sunset DECA

Blues Shuffle 2+

US 70s TV Theme

6/8 Blues

UK Soul Pop

Lovely Shuffle

Asian Pops

Modern Shuffle +

8Beat Adria

Cool R&B

Italian Tango

Scand Shuffle

70s Scat Legend

Tango Orchestra

Modern R&B 1

Tango Milonga

Sing Along

LATIN
*2

Heart Beat

Simple Samba

Chart Guitar Pop

Simple BossaNova

Fusion Shuffle 2

Piano JazzBallad

Fusion Shuffle 1

Modern R&B 2 +
Soul R&B

POPS

60s Vintage Pop

Jersey Pop

*2, *3

ELS-02/ELS-02C Owner’s Manual

Bomba
Pop Latin
5

Beguine 1
Beguine 2
Tango 1
Tango 2

Tango 3

Rhythm List

Guitar Rumba 1

Guitar Rumba 2

BALLAD
1

Simple 8BtBallad

*2
*2

Piano Rumba

*2, *3

SimpleRockBallad

Piano Cha Cha

*2, *3

8Beat Ballad
Acoustic 8Bt Bld

Guitar Ballad 3

Piano Ballad
ClassicPianoBld

Flamenco

16Beat Ballad 3

ElecPiano Ballad

16Beat Ballad 4

Pop Piano Ballad

6/8 Ballad

Piano8BeatBallad

*2, *3

Tarantella

6/8 Slow Rock 1

Piano Slow Rock

*2, *3

Sirtaki

6/8 Slow Rock 2

PianoOrchBallad

Scand Schottis

6/8 Slow Rock 3

Hawaiian

6/8 Orchestral 1

*2
2

Simple Rock

Polka 1

Moonlight 6/8

Simple Shfl Rock

Euro Slow Rock

Hard Rock 1

Acoustic Ballad

Hard Rock 2

Orchestral Polka

Big Rock Ballad

Hard Rock 3 +

Zither Polka

90s Rock Ballad

Tears Rock 1

Power Ballad

Tears Rock 2

Scottish Polka

Easy Ballad

British Rock

Ober Polka

Romantic Ballad

Soft Rock

Party Polka

Love Song

Euro Polka

Epic Ballad +

Stadium Rock +

Dramatic Ballad

Contemp Rock +

Italian Polka

Polka Pop +

Power Rock

Animation Ballad

Standard Rock

Secret Service

Acoustic Rock

Celtic Dance

70s Cool Ballad

Brit Rock Pop +

Celtic Dance 3/4

80s SmoothBallad

German Rock

90s Cool Ballad

Funk Pop Rock

Irish Dance
Irish Hymn

Celtic Christmas
4

Scottish Reel

Pop Evergreen

Chart Rock Shfl+

ChartPianoShfl +

Reggae

VocalPopBallad +

Happy Reggae

70s Pop Duo 1

Sheriff Reggae 1

70s Pop Duo 2

Sheriff Reggae 2

70s Glam Piano

Shuffle Reggae

Movie Ballad 1

60s Rock 2

Caribbean

Movie Ballad 2

60s Rock 3 +

Zouk

80s Movie Ballad

60s Rock 4 +

Hully Gully

BigScreenClassic

70s Rock +

Chart Ballad

80s Power Rock+

Hoedown 2

Analog Ballad

80s Synth Rock+

Bluegrass 1

Pop Ballad

80s Pop Rock +

Bluegrass 2

Modern PopBallad

80s Guitar Pop+

Modern Bluegrass

New R&B Ballad

Country Band

Slow&Easy 1

Country Shuffle

Slow&Easy 2

Country 2/4

Chillout

Rock Shuffle 3 +

Pickin' Swing

Country Rock Bld

70s RockShuffle+

Easy Country

Rock&Roll 1

JPN Romantic Bld

Rock&Roll 2

Hoedown 1

ChinaPopBallad 1

*2
6

ChinaPopBallad 2
China Dance

JPN FolkPopDuo

China Trad 1

JPN Dance Ballad

China Trad 2

Ethereal Voices

*2, *3

Beach Rock
Surf Rock
3

On Broadway

60s Rock 1

00s Boy Band
4

Rock Shuffle 1
Rock Shuffle 2

Rock&Roll 3 +
*2

*2
*2, *3

Coudy Bay +

*1, *3

Night Walk +

*1, *2, *3

6/8 Rock

JPN R&B Ballad
JPN TVSoundtrack

Kung Fu

*1, *2

Rhythm/Keyboard Percussion

Schlager 6/8

ROCK

6/8 Orchestral 2

Enka

Banda Polka

Guitar Ballad 2
*2

16Beat Ballad 2

Polka 2

Organ Ballad 2

Bolero

Mexican Dance

Guitar Ballad 1

Pop Gtr Ballad

Pasodoble

16Beat Ballad 1

Pop Flamenco

Organ Ballad 1

8Beat Modern

WORLD MUSIC
1

60s Rock&Roll +

Rock&RollShuffle

Jive
Skiffle
5

Boogie Woogie 1

ELS-02/ELS-02C Owner’s Manual

Rhythm List

Boogie Woogie 2

Swingin' Boogie

Disco Fox

Oldies Rock&Roll

Mallorca Disco +

*1, *2
*1, *2

Disco Palace

Metronome 4/4 +

*1, *2

Southern Rock

Disco Philly 1

Metronome 6/8 +

*1, *2

Cowboy Rock

Disco Philly 2

Metronome 9/8 +

*1, *2

Scand Bugg

Disco Teens 1

Country Rock 1

Country Blues

*1, *2

Disco Funk 1

Metronome 7/4 +

*1, *2

Disco Funk 2

Metronome 8/4 +

*1, *2

Click 2/4 +

*1, *2

Country Straits+

Dance Pop

Click 3/4 +

*1, *2

Country Strum

US Disco

Click 4/4 +

*1, *2

Irish Rock

Saturday Night +

Click 6/8 +

*1, *2

60s Rising Pop

Disco Fever

Click 9/8 +

*1, *2

Alp Rock +

90s Disco

Click 12/8 +

*1, *2

Caribbean Rock 1

70s Disco 1

Click 5/4 +

*1, *2

Caribbean Rock 2

70s Disco 2

Click 7/4 +

*1, *2

70s Disco 3

Click 8/4 +

*1, *2

*1, *2
5

Trip Hop

Cowbell 2/4 +

*1, *2

JPN Pop Rock 2

Chart Pop 1

Cowbell 3/4 +

*1, *2

JPN Band Rock 1

Chart Pop 2

Cowbell 4/4 +

*1, *2

JPN Band Rock 2

Ground Beat

Cowbell 6/8 +

*1, *2

JPN Light Rock 1

Synth Pop

Cowbell 9/8 +

*1, *2

JPN Light Rock 2

Synth Pop Duo +

Cowbell 12/8 +

*1, *2

Cowbell 5/4 +

*1, *2

Cowbell 7/4 +

*1, *2

Cowbell 8/4 +

*1, *2

WoodBlock 2/4 +

*1, *2

Pop Beat 1

WoodBlock 3/4 +

*1, *2

Pretty Cute

Pop Beat 2

WoodBlock 4/4 +

*1, *2

Happy Pop

Funky Dance

WoodBlock 6/8 +

*1, *2

Dancehall

WoodBlock 9/8 +

*1, *2

Garage 1

WoodBlock 12/8 +

*1, *2

US Pop

JPN Idol Rock

UK Pop

JPN Kids Hero

Turkish Eurobeat

Dragon Rock

Oriental Pop

Miracle Rock

DANCE
Simple DancePop+
Simple Disco

*1, *2

Garage 2 +

WoodBlock 5/4 +

*1, *2

Electronica +

WoodBlock 7/4 +

*1, *2

WoodBlock 8/4 +

*1, *2

Latin Disco 1
Latin Disco 2

*3
7

Trance Pop

US Hip Hop 1
US Hip Hop 2 +

Euro Trance 1
Euro Trance 2

Euro Hip Hop 2 +

6/8 Trance 2

Hip Hop Pop

Club Dance 2 +

Hip Hop Groove
Classic Hip Hop
Pop R&B

Global DJ's
*2

JPN Idol Pop 1 +

Techno Party

JPN Idol Pop 2

Dream Dance

JPN Idol Pop 3

80s Dance

JPN Dance Pop 1

Club House

JPN Dance Pop 2

Swing House

Cute Techno

Funky House

Dance Police

Dirty Pop
Mallorca Party +

Hip Hop Light

*2
*1, *2

Club Dance 3

Dancefloor

*1, *2

Euro Hip Hop 1

6/8 Trance 1

Club Dance 1

Club Latin

Ibiza 2
Ibiza 3

Latin DJ's

Ibiza 1

*1, *2

Party Arena
Apres Ski Hit

*1, *2

Metronome 5/4 +

Disco Chocolate

JPN Rock Duo +

Disco Teens 2

JPN Pop Rock 1

1
*1, *2

Metronome 12/8 +

New Country

Disco Fox Rock +

METRONOME
Metronome 3/4 +

Country Rock 2

*1, *2

Metronome 2/4 +

Croco Twist +

Disco Rock +

ELS-02/ELS-02C Owner’s Manual

Accompaniment

Accompaniment
The Accompaniment function provides arpeggiated
chords and other instrumental embellishments when
rhythms are used.
Accompaniment controls are selected from the Rhythm
Menu and Rhythm Condition display.

Press any one of the RHYTHM buttons
once.

Main Drum and Add Drum contains drum and
percussion rhythm patterns.
When you turn both Main Drum and Add Drum off,
the drum and percussion do not sound. Generally,
Main Drum contains the main part of the rhythm
and Add drum has additional percussion sounds,
such as tambourine.

Adjust the volume and amount of reverb
applied to the Accompaniment.

Accompaniment parts

5
Rhythm/Keyboard Percussion

Pressing the same rhythm button on the panel again
calls up the Rhythm Condition display.
The two sliders at the right side of the display can
control the Accompaniment volume and reverb.
Touch the slider in the display or use the Data
Control dial to adjust the volume/reverb.

At the bottom of the display, there are seven part
buttons, such as Chord 1, Chord 2, Pad, and so on.
These parts, with the exception of Main Drum and
Add Drum, are Accompaniment parts.

Turn the desired parts on.
The Accompaniment consists of five parts, Chord 1,
Chord 2, Pad, Phrase 1, and Phrase 2, and each of
them can be set to on or off by pressing
corresponding button in the display.
If you turn all the parts off, the Accompaniment
does not sound.

CHORD 1/CHORD 2:
These are the rhythmic chord backing parts.

PAD:
This part features sustained chords and commonly
uses lush sounds such as strings and organ.

PHRASE 1/PHRASE 2:
These parts are used for various embellishments and
riffs that enhance the Song, such as brass section
accents and chord arpeggios.
Not all parts contain accompaniment data. Some
parts may be empty depending on the selected
rhythm and rhythm section.

ELS-02/ELS-02C Owner’s Manual

Automatic Accompaniment – Auto Bass Chord (A.B.C.)

SINGLE FINGER:

Automatic Accompaniment
– Auto Bass Chord (A.B.C.)
The Auto Bass Chord (A.B.C.) function works with the
Rhythm section of the Electone to automatically produce
bass accompaniment as you play. It adds an entirely new
dimension to your performance by effectively putting a
full backing band at your disposal. One of three different
modes (Single Finger, Fingered Chord, Custom A.B.C.) is
used for producing Automatic Accompaniment patterns.
Before using the A.B.C. function, turn Pedal Poly off. If
Pedal Poly is set to on, the bass pattern of the A.B.C. will
not sound.

The Single Finger mode provides the fastest and
easiest means to obtain many different chord/bass
combinations. You can produce major, minor, 7th,
and minor 7th chords by simply using one, or at
most, two or three fingers to play the chords. The
chord produced will sound in the same octave
regardless of where it is played on the Lower
keyboard.

Key of C
C

Press the root of the chord (the note
that corresponds to the chord’s name).
Cm

To set the A.B.C. function:

DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

A.B.C./M.O.C. display

The A.B.C./M.O.C. display appears. The A.B.C. section is
at the left half of this display.

1 A.B.C. MODE
OFF:
Cancels the Auto Bass Chord function.

ELS-02/ELS-02C Owner’s Manual

7th chords:
Simultaneously press the root and any
one white key to the left of it.

Press the [A.B.C./M.O.C.] button.

Minor chords:
Simultaneously press the root and any
one black key to the left of it.

Reference page
• POLY (page 44)

Major chords:

Cm7

Minor 7th chords:
Simultaneously press the root as well
as any black key and any white key to
the left of it.

Playing single finger chords without the use of the
rhythm lets you add full continuous chords to your
performance.

FINGERED CHORD:
The Fingered Chord mode automatically produces
bass accompaniment for chords played in the Lower
keyboard. It allows you to use a wider range of chord
types than in the Single Finger mode. In the
Fingered Chord mode, you play full chords while the
Auto Bass Chord function automatically selects the
appropriate bass pattern. If you play only one or two
notes in the Lower keyboard, the appropriate chord
will sound based on the previously played chord.

Melody On Chord (M.O.C.)

Key of C
Cm

Cm7

Cmaj7

Cm maj7

Caug

Cdim

Cdim7

Csus4

C7sus4

Cm7-5

Cm6

Cadd9

Melody On Chord (M.O.C.)
The Melody On Chord (M.O.C.) feature automatically
adds a harmony part to the melodies you play on the
Upper keyboard. The harmony is derived from the
chords you play on the Lower keyboard — or from the
chords that are played for you, if you use Automatic
Accompaniment. Melody On Chord has three different
modes, each providing a different set of harmonics to
accompany the melody played. Melody On Chord can
also be controlled with the Knee Lever.

To set the M.O.C. function:
Press the [A.B.C./M.O.C.] button.
DISPLAY SELECT

NOTE
When playing certain chords (aug, dim7, sus4, 6, and m6),
make sure to play the root of the chord as the lowest note
in that chord.

Playing fingered chords without the use of the
rhythm lets you add full continuous chords to your
performance.

VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

5
Rhythm/Keyboard Percussion

L.ORGAN ROTARY SP
SPEED
FLUTES

CUSTOM A.B.C.:
The Custom A.B.C. mode is a slight variation on the
Fingered Chord mode. It allows you to determine
what bass notes will be played in the
accompaniment by playing a note on the Pedalboard
along with the chords you play in the Lower
keyboard.

A.B.C./M.O.C. display

2 MEMORY
LOWER:
When this is set to on, the Lower keyboard Voices
and chord accompaniment keep playing even after
you release your fingers from the Lower keyboard,
while the rhythm plays.

PEDAL:
When this is set to on, the Pedalboard Voices and
bass accompaniment keep playing even after you
release your foot from the Pedalboard, while the
rhythm plays.
(In the Single Finger and Fingered modes:) When
this is set to on, the bass accompaniment of the
Pedalboard Voices keeps playing even after you
release your fingers from the Lower keyboard.

The A.B.C./M.O.C. display appears. The M.O.C. section
is at the right half of this display.

1 M.O.C. MODE
OFF:
Cancels the Melody On Chord function.

Mode 1:
When you start the rhythm with [SYNCHRO START]
button, set the Lower/Pedal Memory to on. When
Memory is off, releasing your fingers from the Lower
keyboard stops the rhythm.

Produces harmonies of up to two notes in a range
close to the melody played.

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion

Mode 2:
Produces harmonies of up to three notes in a range
close to the melody played.

Keyboard Percussion

Mode 3:

The Keyboard Percussion function features many types of
drum and percussion sounds, playable from the
keyboards and Pedalboard.
Keyboard Percussion has two different modes, Preset and
User. Preset Keyboard Percussion lets you play the preset
drum kit sounds from the keyboards (assigned
beforehand to the keys), while the User Keyboard
Percussion lets you freely assign the drum sounds to any
key or pedal you wish.

Produces harmonies of up to four notes in a range
relatively distant from the melody played.

2 KNEE
On/off switch for Knee Lever control over Melody On
Chord operation. To use the Melody On Chord function
with Knee Lever control, first switch the Knee setting to
ON, then select one of the three modes (described
above). When the control is on, pressing the Knee Lever
to the right activates the Melody On Chord function.
Reference page
• Controlling Melody On Chord (with Knee Lever); (page 181)

Melody On Chord can be heard only when the Upper
Keyboard Voice section’s volume is set to the appropriate
value. Melody On Chord does not apply to the Lead
Voices.

Using the Preset Keyboard
Percussion

Turn off the Upper, Lower and/or Pedal
Voices by setting each Voice’s volume
to MIN.
NOTE
In the Voice Display, each Voice section can be muted
(page 16).

Turn on the Keyboard Percussion
function by pressing the KEYBOARD
PERCUSSION [1] or [2] button.
The Keyboard Percussion (K.B.P.) display appears.
KEYBOARD
PERCUSSION

Pressing the KEYBOARD PERCUSSION [1] button
calls up the Preset 1 kit on the Upper/Lower
keyboards, and pressing the [2] button calls up the
Preset 2 kit on the Pedalboard.
NOTE
Two Keyboard Percussion sets, [1] and [2], can be played
at the same time by setting both buttons to on.

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion

3
4

Press the [ASSIGN] button at the top
right in the display to call up the
ASSIGN Page.

Adjust the volume and amount of reverb
applied to the Keyboard Percussion.
Two sliders in the K.B.P. display determine the
reverb and volume settings. To adjust the volume
and amount of reverb, touch the slider in the display
or use the Data Control dial.

Press the [KIT CHANGE] button at the
center of the display to call up the
Keyboard Percussion Kit List.

Rhythm/Keyboard Percussion

The settings here determine the reverb/volume for
the entire Keyboard Percussion setup, not for each
percussion instrument. You can, however, adjust
each percussion instrument’s reverb/volume
(page 83).

Play some notes on the keyboards and/
or Pedalboard.

Press the kit name you want to use from the 38
Keyboard Percussion types. For details of percussion
assignments for each kit, see the Preset Keyboard
Percussion List on page 70.
The message “Are you sure you want to reset the
setup data to the default values?” may appear when
you change the kit. Select [OK] to clear all
assignments (made in the ASSIGN Page only when
User is selected) and detailed settings (made in the
SETUP Page) and call up the selected kit on the
panel. Select [CANCEL] to call up the selected kit
without erasing the assignments and detailed
settings.

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion

Preset Keyboard Percussion List
EL Kit
Preset 1 (UK)
-

SD Brush Roll

Surdo Mute

Side Stick

Snare Drum Heavy

Surdo Open

Snare

Claves

SD Brush Shot 1

Hi Q

Hand Clap

SD Reverb 1

Whip Slap

Snare Tight

Snare Drum Light

Scratch H

Floor Tom L

Synth Tom 3

Tom 3

Scratch L

Hi-Hat Closed

Concert BD

Snare Drum Rim 1

Finger Snap

Floor Tom H

Synth Tom 2

Tom 2

Click Noise

Hi-Hat Pedal

Bass Drum Heavy

Hi-Hat Closed

Metronome Click

Low Tom

Synth Tom 1

Tom 1

Metronome Bell

Hi-Hat Open

Bass Drum Light

Hi-Hat Open

Seq Click L

Mid Tom L

Snare Drum Heavy

Ride Cymbal 1

Seq Click H

Mid Tom H

SD Brush Roll

Synth Tom 3

Brush Tap

Crash Cymbal 1

Snare Drum Heavy

Crash Cymbal 1

Brush Swirl

High Tom

SD Brush Shot 1

Synth Tom 2

Brush Slap

Ride Cymbal 1

SD Reverb 1

Orchestra Cymbal

Brush Tap Swirl

Chinese Cymbal

Snare Drum Light

Snare Roll

Ride Cymbal Cup

Tom 3

Synth Tom 1

Castanet

Tambourine

Snare Drum Rim 1

Snare Soft

Splash Cymbal

Tom 2

Sticks

Hi-Hat Closed

Kick Soft

Tom 1

Open Rim Shot

Hi-Hat Open

Kick Tight

Ride Cymbal 1

Bongo H

Kick

Orch Snare Drum

Bongo L

Side Stick

Crash Cymbal 1

Conga H Mute

Snare

Snare Drum Roll

Conga H Open

Hand Clap

Orchestra Cymbal

Conga L

Snare Tight

Orch Cymbal Roll

Timbale H

Floor Tom L

Triangle Mute

Timbale L

Hi-Hat Closed

Tambourine

Agogo H

Floor Tom H

Triangle Open

Agogo L

Hi-Hat Pedal

Castanet

Cabasa

Low Tom

Cowbell 1

Maracas

Hi-Hat Open

Timbale 1 Low

Samba Whistle H

Mid Tom L

Timbale 1 High

Samba Whistle L

Mid Tom H

Wood Block Low

Guiro Short

Crash Cymbal 1

Conga Low

Guiro Long

High Tom

Wood Block High

Claves

Ride Cymbal 1

Conga High

Wood Block H

Chinese Cymbal

Bongo Low

Wood Block L

Ride Cymbal Cup

Agogo Low

Cuica Mute

Tambourine

Bongo High

Cuica Open

Splash Cymbal

Agogo High

Triangle Mute

Cowbell

Cuica Low

Triangle Open

Crash Cymbal 2

Hand Claps

Shaker

Vibraslap

Cuica High

Jingle Bells

Ride Cymbal 2

Shaker

Bell Tree

(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%

(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&

&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ

Preset 2 (PK)
Kick

'ᅊ

Preset 1 (LK)
-

&ᅊ

Preset 1 (UK)

Bass Drum Heavy

&ᅊ

Preset 2 (PK)

Standard Kit 1*

Preset 1 (LK)

: Indicates the keys of the ELS-02/ELS-02C keyboard.
* Standard Kit 2, Hit Kit, Room Kit, Rock Kit, Electro Kit, Analog Kit, Dance Kit, Jazz Kit, Brush Kit, Symphony Kit, Live!Studio Kit,
Live!Power Kit 1, Live!Power Kit 2 and Live!Rock Kit have the same sound assignments as Standard Kit 1.

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion

Live!AcousticKit
Preset 1 (UK)

Stick Acoustic

Surdo Mute

Stick Real

Surdo Open

Snare Acoustic

Surdo Open

Snare Real 1

Hi Q

Hand Clap Power

Hi Q

Clap Power

Whip Slap

Snare Rough Aco

Whip Slap

Snare Real 2

Scratch H

Tom Acoustic 1

Scratch H

Tom Real 1

Scratch L

Hi-HatClosedAco

Scratch L

Hi-HatClosedReal

Finger Snap

Tom Acoustic 2

Finger Snap

Tom Real 2

Click Noise

Hi-HatPedal Aco

Click Noise

Hi-Hat PedalReal

Metronome Click

Tom Acoustic 3

Metronome Click

Tom Real 3

Metronome Bell

Hi-Hat Open Aco

Metronome Bell

Hi-Hat Open Real

Seq Click L

Tom Acoustic 4

Seq Click L

Tom Real 4

Seq Click H

Tom Acoustic 5

Seq Click H

Tom Real 5

Brush Tap

CrashCymbalAco 1

Brush Tap

CrashCymbalReal1

Brush Swirl

Tom Acoustic 6

Brush Tap Swirl

Tom Real 6

Brush Slap

RideCymbal Aco 1

Brush Slap

RideCymbalReal 1

Brush Tap Swirl

China Cymbal Aco

Brush Tap Swirl

ChinaCymbal Real

Snare Roll Aco

RideCymbalCupAco

Snare Roll Rock

RideCym Cup Real

Castanet

Tambourine

Castanet

Tambourine

Snare Soft Aco

SplashCymbal Aco

Snare Tight

SplashCymbalReal

Sticks

Kick Soft Aco

Kick Genuine

Rim Acoustic

Rim Real

Kick Mute Aco

Kick Real 1

Bongo H

Kick Open Aco

Bongo H

Kick Real 2

Bongo L

Stick Acoustic

Bongo L

Stick Real

Conga H Mute

Snare Acoustic

Conga H Mute

Snare Real 1

Conga H Open

Hand Clap Power

Conga H Open

Clap Power

Conga L

Snare Rough Aco

Conga L

Snare Real 2

Timbale H

Tom Acoustic 1

Timbale H

Tom Real 1

Timbale L

Hi-HatClosedAco

Timbale L

Hi-HatClosedReal

Agogo H

Tom Acoustic 2

Agogo H

Tom Real 2

Agogo L

Hi-HatPedal Aco

Agogo L

Hi-Hat PedalReal

Cabasa

Tom Acoustic 3

Cabasa

Tom Real 3

Maracas

Hi-Hat Open Aco

Maracas

Hi-Hat Open Real

Samba Whistle H

Tom Acoustic 4

Samba Whistle H

Tom Real 4

Samba Whistle L

Tom Acoustic 5

Samba Whistle L

Tom Real 5

Guiro Short

CrashCymbalAco 1

Guiro Short

CrashCymbalReal1

Guiro Long

Tom Acoustic 6

Guiro Long

Tom Real 6

Claves

RideCymbal Aco 1

Claves

RideCymbalReal 1

Wood Block H

China Cymbal Aco

Wood Block H

ChinaCymbal Real

Wood Block L

RideCymbalCupAco

Wood Block L

RideCym Cup Real

Cuica Mute

Tambourine

Cuica Mute

Tambourine

Cuica Open

SplashCymbal Aco

Cuica Open

SplashCymbalReal

Triangle Mute

Cowbell

Triangle Mute

Cowbell

Triangle Open

CrashCymbalAco 2

Triangle Open

CrashCymbalReal2

Shaker

Vibraslap

Shaker

Vibraslap

Jingle Bells

RideCymbal Aco 2

Jingle Bells

RideCymbalReal 2

Wind Chime

)
)ᅊ
*
*ᅊ
$
$ᅊ
%

)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&

&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ

ELS-02/ELS-02C Owner’s Manual

5
Rhythm/Keyboard Percussion

Surdo Mute

(

Preset 2 (PK)
Kick Real 2

'ᅊ

Preset 1 (LK)
-

&ᅊ

Preset 1 (UK)

Kick Open Aco

&ᅊ

Live!Real Drums
Preset 2 (PK)

Preset 1 (LK)

Keyboard Percussion

Live!RealBrushes
Preset 1 (UK)

Surdo Mute

Stick Brush

Surdo Mute

Snare T8 Rim

Surdo Open

Vintage Slap 4

Surdo Open

Snare T8 2

Hi Q

Clap Power

Hi Q

Clap T9

Whip Slap

Vintage Slap 5

Whip Slap

Snare T8 1

Scratch H

TomRealBrushes 1

Scratch H

Tom T8 1

Scratch L

Hi-Hat Closed RB

Scratch L

Hi-Hat Closed T8

Finger Snap

TomRealBrushes 2

Snare Hammer

Tom T8 2

Click Noise

Hi-Hat Pedal RB

Kick Zap Hard

Hi-Hat Pedal T8

Metronome Click

TomRealBrushes 3

Snare Garg L

Tom T8 3

Metronome Bell

Hi-Hat Open RB

Kick Tek Power

Hi-Hat Open T8

Vintage Tip

TomRealBrushes 4

Kick Slimy

Tom T8 4

Vintage Swirl 1

TomRealBrushes 5

Kick T8 4

Tom T8 6

Vintage Slap 1

CrashCymbal RB 1

Snare Analog CR

Crash Cymbal T8

Vintage Swirl 2

TomRealBrushes 6

Snare T8 7

Tom T8 7

Vintage Slap 2

Ride Cymbal RB

SnareClap Analog

Ride Cymbal T9

Vintage TapSwirl

ChinaCymbal RB

Snare T8 6

China Cymbal 2

VintageSlapSwirl

Ride Cup RB 1

Tom T8 5

RideCymbal Cup 2

Vintage Swirl 3

Tambourine

Snare T8 5

Tambourine RX5

Vintage Slap 3

Splash Cymbal RB

Kick T8 3

Splash Cymbal

Sticks

Snare T8 4

Kick Soft L

Kick T8 2

Open Rim Shot RB

Snare T8 3

Kick Soft H

T8 Kick Bass

Bongo H

KickJazzAmbience

Conga T8 5

Kick T8 1

Bongo L

Stick Brush

Conga T8 4

Snare T8 Rim

Conga H Mute

Vintage Slap 4

Conga T8 3

Snare T8 2

Conga H Open

Clap Power

Conga T8 2

Clap T9

Conga L

Vintage Slap 5

Conga T8 1

Snare T8 1

Timbale H

TomRealBrushes 1

Timbale H

Tom T8 1

Timbale L

Hi-Hat Closed RB

Timbale L

Hi-Hat Closed T8

Agogo H

TomRealBrushes 2

Glass H

Tom T8 2

Agogo L

Hi-Hat Pedal RB

Glass L

Hi-Hat Pedal T8

Cabasa

TomRealBrushes 3

Cabasa

Tom T8 3

Maracas

Hi-Hat Open RB

Maracas T8

Hi-Hat Open T8

Samba Whistle H

TomRealBrushes 4

Fx Gun 2

Tom T8 4

Samba Whistle L

TomRealBrushes 5

Fx Gun 1

Tom T8 6

Guiro Short

CrashCymbal RB 1

Analog Shaker H

Crash Cymbal T8

Guiro Long

TomRealBrushes 6

Analog Shaker L

Tom T8 7

Claves

Ride Cymbal RB

Claves T8

Ride Cymbal T9

Wood Block H

ChinaCymbal RB

Hi Q 1

China Cymbal 2

Wood Block L

Ride Cup RB 1

Hi Q 2

RideCymbal Cup 2

Cuica Mute

Tambourine

Scratch H 2

Tambourine RX5

Cuica Open

Splash Cymbal RB

Scratch L 2

Splash Cymbal

Triangle Mute

Cowbell

Triangle Mute

Cowbell T8

Triangle Open

CrashCymbal RB 2

Triangle Open

Crash Cymbal 4

Shaker

Vibraslap

Analog Shaker

Vibraslap

Jingle Bells

Ride Cup RB 2

Sleigh Bells

Ride Cymbal 3

Wind Chime

(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%

(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&

Snare Hip 1

Snare Hip 2

Snare Hip Gate

Snare Break 1

Kick Blip

Snare Fx 1

Kick Fx Hammer

&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ

Preset 2 (PK)
Kick T8 1

'ᅊ

Preset 1 (LK)
-

&ᅊ

Preset 1 (UK)

KickJazzAmbience

&ᅊ

Analog T8 Kit
Preset 2 (PK)

Preset 1 (LK)

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion

Analog T9 Kit
Preset 1 (UK)

Snare T9 Rim

W Kick

Snare T9 Rim

Surdo Open

Snare T9 1

Disco Fx

Snare T9 1

Hi Q

Clap T9

WhiteNoiseDown 1

Clap T9

Whip Slap

Snare T9 2

PinkNoise Down 1

Snare T9 2

Scratch H

Tom T9 1

WhiteNoiseDown 2

Tom T9 1

Scratch L

Hi-Hat Closed T9

PinkNoise Down 2

Hi-Hat Closed T8

Snare Drum&Bass1

Tom T9 2

White Noise Up 2

Tom T9 2

Kick Break 2

Hi-Hat Pedal T9

White Noise Up 1

Hi-Hat Pedal T9

Snare Distortion

Tom T9 3

Pink Noise Up

Tom T9 3

Kick Tek Power

Hi-Hat Open T9

WhiteNoiseUp Rel

Hi-Hat Open T9

KickDistortionRM

Tom T9 4

PinkNoise Up Rel

Tom T9 4

Kick T9 2

Tom T9 5

Kick T9 4

Tom T9 5

Snare Analog CR

Crash Cymbal T9

Snare T8 Rim

Crash Cymbal T9

Snare T9 5

Tom T9 6

Snare T8 5

Tom T9 6

Clap Analog Sm

Ride Cymbal T9

Hand Clap

Ride Cymbal T9

Snare T9 Gate 1

China Cymbal 2

Snare Garg L

Crash Cymbal 4

Snare Rock Roll

RideCymbal Cup 2

Snare Roll

RideCymbal Cup 2

Snare T9 3

Tambourine RX5

Snare T9 3

Tambourine Hit

Snare T9 4

Splash Cymbal 2

Snare T8 1

Splash Cymbal 2

Snare T9 Gate 2

Snare T9 5

Kick T9 4

Kick T9 1

Snare T9 6

Snare T9 Gate

Kick T9 1

Kick T9 2

Conga T8 5

Kick T9 3

Bongo H Open 1 F

Kick T9 5

Conga T8 4

Snare T9 Rim

Bongo L Open 3 F

Snare T9 Rim

Conga Tip

Snare T9 1

Conga H Tip

Snare T9 1

Conga Open Slap

Clap T9

Conga H SlapOpen

Clap T9

Conga Open

Snare T9 2

Conga H Open 2

Snare T9 2

Timbale H

Tom T9 1

Timbale H

Tom T9 1

Timbale L

Hi-Hat Closed T9

Timbale L

Hi-Hat Closed T8

Analog Click

Tom T9 2

Agogo H

Tom T9 2

Conga T8 1

Hi-Hat Pedal T9

Agogo L

Hi-Hat Pedal T9

Cabasa

Tom T9 3

Cabasa

Tom T9 3

Maracas Slur 2

Hi-Hat Open T9

Maracas Slur 2

Hi-Hat Open T9

Fx Gun 2

Tom T9 4

Vox Drum L

Tom T9 4

Fx Gun 1

Tom T9 5

Vox Drum H

Tom T9 5

Scratch H 3

Crash Cymbal T9

Guiro Short

Crash Cymbal T9

Scratch Down

Tom T9 6

Guiro Long

Tom T9 6

Hi Q 3

Ride Cymbal T9

Claves

Ride Cymbal T9

Hi Q 1

China Cymbal 2

Wood Block H

Crash Cymbal 4

Hi Q 2

RideCymbal Cup 2

Wood Block L

RideCymbal Cup 2

Scratch H 2

Tambourine RX5

Cuica H

Tambourine Hit

Scratch L 2

Splash Cymbal 2

Cuica L

Splash Cymbal 2

Triangle Mute

Cowbell 1

Triangle Mute

Cowbell 1

Triangle Open

Crash Cymbal 4

Triangle Open

Crash Cymbal 1

Analog Shaker

Cowbell T8

Analog Shaker

Cowbell T8

Sleigh Bells

Ride Cymbal 3

Sleigh Bells

Ride Cymbal 3

Wind Chime

)
)ᅊ
*
*ᅊ
$
$ᅊ
%

)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&

Snare Piccolo

Snare Break Roll

Snare T8 7

Noise Burst

SnareRckRollDist

Vox Bell

Snare Brush Mute

Snare R&B 1

Kick Blip Hard

Vox Alk

Snare Jungle 1

Udu High

Kick Sustain

Filter Kick

&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ

ELS-02/ELS-02C Owner’s Manual

5
Rhythm/Keyboard Percussion

Surdo Mute

(

Preset 2 (PK)
Kick T9 5

'ᅊ

Preset 1 (LK)
-

&ᅊ

Preset 1 (UK)

Kick T9 3

&ᅊ

House Kit
Preset 2 (PK)

Preset 1 (LK)

Keyboard Percussion

HipHop Kit
Preset 1 (UK)

Surdo Mute

SnareAnalogSmRim

Surdo Mute

Snare T9 Rim

Surdo Open

Snare HipHop 1

Surdo Open

Snare T9 1

Hi Q

Snare Clappy

Hi Q

Clap T9

Whip Slap

Snare HipHop 2

Whip Slap

Snare T9 4

Scratch H

Floor Tom L

Scratch H

Tom T9 1

Scratch L

Hi-HatClosed Hip

Scratch L

Hi-Hat Closed T9

Hi-HatClosedT8 2

Low Tom

Snare Drum&Bass1

Tom T9 2

Tom T8 3

Hi-Hat Pedal Hip

Kick Break 2

Hi-Hat Pedal T9

Hi-Hat Open T8 2

Mid Tom L

Snare Distortion

Tom T9 3

Tom T8 6

Hi-Hat Open Hip

Kick Tek Power

Hi-Hat Open T9

Crash T8

High Tom

KickDistortionRM

Tom T9 4

Triangle Mute

Ride Cymbal 3

BassDrumHardLong

Tom T9 5

Triangle Open

Crash Cymbal 3

BassDrumTekPower

Crash Cymbal T9

Wind Chime

Shaker 2

Bass Drum Dist 5

Conga T8 1

TambourineLight2

ScratchBDForward

Bass Drum Dist 3

Ride Cymbal T9

TambourineLight1

ScratchBDReverse

Bass Drum Dist 1

Conga T8 2

Kick HipHop 9

Kick HipHop 2

BD Drum & Bass 1

Analog Click

Hi-HatClosed Tek

SnareHipHopRim 2

Bass Drum Blip

Claves T8 1

Kick Gate

HipHop Clap 2

BassDrumAnalogSm

Maracas T8

Hi-HatOpen Lo-Fi

Kick T8 2

KickGranCasaOpen

Kick T8 3

Hi-HatReverseD&B

Kick T9 HD 3

Kick HipHop 1

Kick T9 2

Kick HipHop 3

Kick Analog CR

Snare T8 1

Kick T9 4

SnareHipHopRim 3

SnareAnalogSmRim

Snare T8 2

Snare T9 Rim

Snare HipHop 5

Snare HipHop 1

Snare T8 3

Snare T9 1

Electric Clap 1

Snare Clappy

Snare Analog CR

Clap T9

Handbell H

Snare HipHop 2

Snare Jungle 1

Snare T9 4

Kick HipHop 4

Floor Tom L

Snare Drum&Bass2

Tom T9 1

HipHop Clap 3

Hi-HatClosed Hip

Snare Hip 1

Hi-Hat Closed T9

HipHop Snap 2

Low Tom

Snare R&B 1

Tom T9 2

SnareHipHopRim 5

Hi-Hat Pedal Hip

Snare R&B 2

Hi-Hat Pedal T9

HipHop flex 1

Mid Tom L

Snare Hip 1

Tom T9 3

HipHop flex 2

Hi-Hat Open Hip

Snare Wood

Hi-Hat Open T9

Shaker 2

High Tom

Snare Timbre

Tom T9 4

Kick HipHop 5

Ride Cymbal 3

Hi-HatClosedT8 1

Tom T9 5

SnareHipHopRim 4

Crash Cymbal 3

Hi-Hat Open T8 1

Crash Cymbal T9

Snare HipHop 6

Shaker 2

Hi-HatClosedT8 2

Conga T8 1

Snare HipHop 11

ScratchBDForward

Hi-Hat Open T8 2

Ride Cymbal T9

Kick HipHop 10

ScratchBDReverse

Hi-Hat Pedal Aco

Conga T8 2

Snare HipHop 7

Kick HipHop 2

Hi-HatClosed Aco

Analog Click

HipHop Clap 5

SnareHipHopRim 2

Hi-Hat Open Aco

Claves T8 1

Conga H Tip

HipHop Clap 2

Hi-HatClosedLoFi

Maracas T8

Conga H Heel

HipHop Snap 1

Hi-HatOpen Lo-Fi

TambourineAna CR

Conga H Open

Snare HipHop 3

Hi-HatClosed Syn

Analog Shaker

Conga L Open 1

Electric Clap 2

Hi-Hat Open Syn

Cowbell T8

Conga L Open 2

Kick Hip Deep

Analog Shaker 1

CowbellAnalog CR

Kick HipHop 8

Tambourine RX5 2

(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%

(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&

HipHop Clap 6

Tambourine 1 Hit

Snare T8 1

Electric Cowbell

Snare T8 1 H

Conga T8 3

HipHop Clap 7

ElectricTriangle

Tom T8 1

Claves T8 2

Hi-HatClosedT8 2

Analog Shaker 2

Tom T8 2

Electric Clap 1

&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ

Preset 2 (PK)
Kick T9 4

'ᅊ

Preset 1 (LK)
-

&ᅊ

Preset 1 (UK)

Kick Analog CR

&ᅊ

Drum Machine
Preset 2 (PK)

Preset 1 (LK)

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion

Break Kit
Preset 1 (UK)

Snare Hip Rim 1

Cutting Noise 2

Surdo Open

Snare Break 3

Hi Q

Snare Break 1

String Slap

Whip Slap

Snare Break 2

Scratch H

Tom Break 1

Scratch L

HHClosedRockSoft

Finger Snap

Tom Break 2

Snare Break 8

Hi-Hat PedalRock

Snare Break 9

Tom Break 3

Hi-HatClosedBrk1

HH HalfOpen Rock

Hi-HatClosedBrk2

Tom Break 4

Kick Break Deep

Tom Break 5

Snare Hip

Crash Cymbal 1

Snare Lo-Fi

Tom Break 6

Snare Clappy

Ride Cymbal 3

Snare LdwH Mono

China Cymbal 2

Flute Key Click

Snare Rock Roll

RideCymbal Cup 2

Snare Gate 1

Tambourine 1 Hit

Snare Mid

Splash Cymbal 2

Snare Break Rim

Kick Break Heavy

Snare Hip Rim 4

Kick Break 2

Bongo H

Kick Break 1

Cutting Noise 1

Bongo L

Snare Hip Rim 1

Cutting Noise 2

Conga H Tip

Snare Break 3

Conga H OpenSlap

Snare Break 1

String Slap

Conga H Open

Snare Break 2

Bongo 2 H

Tom Break 1

Bongo 2 L

HHClosedRockSoft

Conga Open

Tom Break 2

Agogo L

Hi-Hat PedalRock

Shower

Cabasa

Tom Break 3

Thunder

Maracas Slur

HH HalfOpen Rock

Wind

Timbale H

Tom Break 4

Stream

Timbale L

Tom Break 5

Bubble

Scratch H 3

Crash Cymbal 1

Feed

Scratch Down

Tom Break 6

Claves

Ride Cymbal 3

Wood Block H

China Cymbal 2

Flute Key Click

Wood Block L

RideCymbal Cup 2

Scratch H 2

Tambourine 1 Hit

Scratch L 2

Splash Cymbal 2

Triangle Mute

Cowbell 1

Triangle Open

Crash Cymbal 2

Kick Break 3

Cowbell RX11

Kick Break 4

Ride Cymbal 2

Kick Break 5

Dog

)
)ᅊ
*
*ᅊ
$
$ᅊ
%

)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&

Kick Break 6

Horse

Kick Break 7

Bird Tweet

Hi-HatClosedBrk3

Snare Break 4

Snare Break 5

Snare Break 6

Ghost

Snare Break 7

Maou

&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ

ELS-02/ELS-02C Owner’s Manual

5
Rhythm/Keyboard Percussion

Surdo Mute

(

Preset 2 (PK)
Cutting Noise 1

'ᅊ

Preset 1 (LK)
-

&ᅊ

Preset 1 (UK)

Kick Break 1

&ᅊ

SFX Kit 1/Live! SFX Kit 1
Preset 2 (PK)

Preset 1 (LK)

Keyboard Percussion

SFX Kit 2/Live! SFX Kit 2
Preset 1 (UK)
-

Door Squeak

Pink Noise

Door Slam

WhiteNoiseDown 1

Scratch Cut

PinkNoise Down 1

Scratch Split

WhiteNoiseDown 2

Wind Chime

PinkNoise Down 2

Telephone Ring

White Noise Up 2

White Noise Up 1

Pink Noise Up

WhiteNoiseUp Rel

PinkNoise Up Rel

WhiteNoiseUp LFO

PinkNoise Up LFO

CarEngn Ignition

Car Tires Squeal

Car Passing

Car Crash

Burst

Phone Call

White Noise

Roller Coaster

Door Squeak

Pink Noise

Submarine

Door Slam

WhiteNoiseDown 1

Scratch Cut

PinkNoise Down 1

Scratch Split

WhiteNoiseDown 2

Wind Chime

PinkNoise Down 2

Telephone Ring

White Noise Up 2

White Noise Up 1

Laugh

Pink Noise Up

Scream

WhiteNoiseUp Rel

Punch

PinkNoise Up Rel

Heart Beat

WhiteNoiseUp LFO

Foot Steps

PinkNoise Up LFO

CarEngn Ignition

Car Tires Squeal

Car Passing

Car Crash

Siren

Train

Jet Plane

Starship

Machine Gun

(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%

(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&

Laser Gun

Explosion

Firework

&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ

Preset 2 (PK)
White Noise

'ᅊ

Preset 1 (LK)
-

&ᅊ

Preset 1 (UK)

Phone Call

&ᅊ

Preset 2 (PK)

Noise Kit

Preset 1 (LK)

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion

VocalEffectsKit
Preset 1 (UK)

Female Ha 1

Male Ha 2

Male Ha 3

Male Bh 1

Female Bh 1

Male Kh 1

Female Kh 1

Male Ph 1

Female Ph 1

Male Th 1

Female Th 1

Male Bh 2

C'mon

Female Bh 2

Hoo!

Male Kh 2

Aha!

Female Kh 2

Oh Yeah

Male Ph 2

Yayayayayah

Female Ph 2

Put Your Hands…

Male Th 2

C'mon Now

Female Th 2

Heeey

Male Bh 3

Male Ha 1

Uhh Yeah

Female Bh 3

Female Ha 1

Aaoh

Male Kh 3

Male Ha 2

Come On!

Female Kh 3

Male Ha 3

Yeah!

Male Ph 3

Male Bh 1

Alright Now!

Female Ph 3

Female Bh 1

One

Male Th 3

Male Kh 1

Two

Female Th 3

Female Kh 1

Three

Male Bh 4

Male Ph 1

Four

Female Bh 4

Female Ph 1

One!

Male Kh 4

Male Th 1

Two!

Female Kh 4

Female Th 1

Three!

Male Ph 4

Male Bh 2

Four!

C'mon

Female Ph 4

Female Bh 2

Five!

Hoo!

Male Th 4

Male Kh 2

Six!

Aha!

Female Th 4

Female Kh 2

Seven!

Oh Yeah

Male Ph 2

Eight!

Yayayayayah

Female Ph 2

Clap!

Put Your Hands…

Male Th 2

Gospel Clap 1

C'mon Now

Female Th 2

Gospel Clap 2

Heeey

Male Ha 4

Everybody Now

Female Ha 2

ClapYourHands…

Male Ha 5

WithAllYourSoul

Male Ha 6

Stand Up On…

)
)ᅊ
*
*ᅊ
$
$ᅊ
%

)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&

&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ

ELS-02/ELS-02C Owner’s Manual

5
Rhythm/Keyboard Percussion

(

Preset 2 (PK)
-

'ᅊ

Preset 1 (LK)
-

&ᅊ

Preset 1 (UK)

Male Ha 1

&ᅊ

GospelAdLibs
Preset 2 (PK)

Preset 1 (LK)

Keyboard Percussion

Wonderland Kit
Preset 1 (UK)

Laser Shot

Horse

Cajon Low

Bongo H Open 3 f

Water Phone

Bass Drum

Cajon Slap

Bongo H Rim

Bubble

Footstep

Cajon Tip

Bongo H Tip

Puddle

Snare

Claves High

Bongo H Heel

Thunder

Snare Roll

Claves Low

Bongo H Slap

Shower

Footstep

Hand Clap

Bongo L Open 1 f

Beach

Lion

Bongo L Open 3 f

Stream

Footstep

Finger Snap

Bongo L Rim

Footstep

Oxen

Castanet

Bongo L Tip

Door Squeak

Footstep

Conga H Tip

Bongo L Heel

Door Slam

Conga H Heel

Bongo L Slap

Bass Drum

Big Clock

Conga H Open

Timbale L

Gran Cassa

Footstep

Conga H Mute

Tom 2

Starship

Conga H SlapOpen

Tom 1

Footstep

Conga H Slap

Snare

Train

Conga H SlapMute

Snare Roll

Car Crash

Conga L Tip

Paila L

Hi-Hat Closed

Footstep

Conga L Heel

Timbale H

Cymbal

Puddle

Conga L Open

Hi-Hat Open

Conga L Mute

Tambourine

Conga L SlapOpen

Finger Snap

Conga L Slap

Castanet

Conga L Slide

Triangle Mute

Cowbell Top

Bongo H Open 1 f

Wood Block L

Cowbell 1

Bongo H Open 3 f

Triangle Open

Cowbell 2

Bongo H Rim

Wood Block H

Cowbell 3

Bongo H Tip

Hand Clap

Guiro Short

Bongo H Heel

Jingle Bells

Guiro Long

Bongo H Slap

Bell Tree

Metal Guiro Short

Bongo L Open 1 f

Alarm Bell

Metal Guiro Long

Bongo L Open 3 f

Train

Tambourine

Bongo L Rim

Horn 1

Tambourim Open

Bongo L Tip

Horn 2

Tambourim Mute

Bongo L Heel

Siren

Tambourim Tip

Bongo L Slap

CarEngn Ignition

Maracas

Timbale L

Car Crash

Shaker

Helicopter

Cabasa

Starship

Cuica Mute

Sheep

Cuica Open

Goat

Cowbell High 1

Paila L

Oxen

Cowbell High 2

Timbale H

Whinny

Shekere

Horse

Shekere Tone

Lion

Triangle Mute

Dog

Triangle Open

Cat

Paila H

Hen

Wind Chime

(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%

(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&

Owl

Insects

Frog

Tweet 1

Tweet 2

Cuckoo Clock

Big Clock

Bell

Telephone

Camera

Gnaw

Applause

&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ

Preset 2 (PK)
Bongo H Open 1 f

'ᅊ

Preset 1 (LK)
-

&ᅊ

Preset 1 (UK)

Thunder

&ᅊ

Preset 2 (PK)

Laser Beam

PopLatin Kit

Preset 1 (LK)

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion

Arabic Kit
Preset 1 (UK)

Side Stick

Asma Davul L

Tef Cymbal

Snare Soft

Asma Davul R

Tef Cymbal Mute

Arabic Hand Clap

Asma Davul Side

Tef Tremolo

Snare Drum

Asma Davul Both

Tef Shake 1

Floor Tom L

KoltukDavul Flam

Tef Shake 2

Hi-Hat Closed

KoltukDavul Teke

Tef Tek Flam

Floor Tom H

Koltuk Davul Tek

Tef Full Open

Hi-Hat Pedal

Koltuk Davul Dum

Tef Teke OpShort

Low Tom

Bendir Teke Flam

Tef Tek Op Short

Hi-Hat Open

Bendir Teke Dead

Tef Tek Open

Mid Tom L

Bendir Tek Dead

Tef Dum Open

Nakarazan Dom

Mid Tom H

Bendir Teke

Hollo FingerDead

Cabasa

Crash Cymbal 1

Bendir Tek

Hollo Slap

Nakarazan Edge

High Tom

Bendir Slap

Hollo Dum

Hager Dom

Ride Cymbal 1

Bendir Dum

Kasik

Hager Edge

Crash Cymbal 2

Zil Right Close

Kasik Flam

Bongo H

Duhulla Dom

Zil Right Open

BDarbuka TekDead

Bongo L

Tambourine

Zil Left Close

BDarbuka TekFlam

Conga H Mute

Duhulla Tak

Zil Left Open

BassDarbuka Teke

Conga H Open

Tef Teke Flam

Conga L

Tef Tek Mute

Zagrouda H

Tef Teke Damped

Zagrouda L

TefTekMuteMedium

Katem Dom

Kick Soft

BassDarbukaSlap2

Tef Dum Mute

Katem Tak

Side Stick

Bass Darbuka Dum

Tef Cymbal

Katem Sak

Snare Soft

DarbukaRollClose

Tef Cymbal Mute

Katem Tak

Arabic Hand Clap

Darbuka RollOpen

Tef Tremolo

Doff Tak

Snare Drum

DarbukaTekeFlamD

Tef Shake 1

Tabla Dom

Floor Tom L

Darbuka Tek Dead

Tef Shake 2

Tabla Tak 1

Hi-Hat Closed

DarbukaTekDamped

Tef Tek Flam

Tabla Tik

Floor Tom H

Darbuka TekeFlam

Tef Full Open

Tabla Tak 2

Hi-Hat Pedal

Darbuka Teke

Tef Teke OpShort

Tabla Sak

Low Tom

DarbukaTekeFin 1

Tef Tek Op Short

Tabla Roll Edge

Hi-Hat Open

DarbukaTekeFin 2

Tef Tek Open

Tabla Flam

Mid Tom L

Darbuka Tek 1

Tef Dum Open

Sagat 1

Mid Tom H

DarbukaTekeFin 3

Hollo FingerDead

Tabel Dom

Crash Cymbal 1

DarbukaTekeFin 4

Hollo Slap

Sagat 3

High Tom

Darbuka Tek 2

Hollo Dum

Tabel Tak

Ride Cymbal 1

Darbuka Slap Med

Kasik

Sagat 2

Crash Cymbal 2

Darbuka Slap

Kasik Flam

Rik Dom

Duhulla Dom

Darbuka Dum

BDarbuka TekDead

Rik Tak 2

Tambourine

Bongo Tek Roll

BDarbuka TekFlam

Rik Finger 1

Duhulla Tak

Bongo Flam

BassDarbuka Teke

Rik Tak 1

Cowbell

Bongo Tek Flam

BDarbukaTekeFin1

Rik Finger 2

Duhulla Sak

Bongo Tek

BDarbukaTekeFin2

Rik BrassTremolo

Claves

Bongo Slap

Bass Darbuka Tek

Rik Sak

Doff Dom

Bongo Flam Hi

BassDarbukaSlap1

Rik Tik

Bongo Dum

)
)ᅊ
*
*ᅊ
$
$ᅊ
%

)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&

&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ

ELS-02/ELS-02C Owner’s Manual

5
Rhythm/Keyboard Percussion

(

Preset 2 (PK)
Tef Dum Mute

'ᅊ

Preset 1 (LK)
-

&ᅊ

Preset 1 (UK)

Kick Soft

&ᅊ

Turkish Kit
Preset 2 (PK)

Preset 1 (LK)

Keyboard Percussion

China Kit

Gong Batter

Symphonic Gong 1

Sus Cym 1 Roll S

Jin Luo

Symphonic Gong L

Sus Cymbal 1

Luo High 2

Symphonic Gong 2

Sus Cym 2 Roll L

Luo Mid-Low

Timpani E

Sus Cymbal 2

Luo

Timpani F

Concert Tom 5

Jin Luo Low

Timpani F#

OrchCymbal 1 ckd

Da Cha 1

Timpani G

Concert Tom 4

Da Cha Effect

Timpani G#

Orch Cymbal 1

Zhongcha

Timpani A

Concert Tom 3

Xiaocha Effect

Timpani A#

Orch Cymbal 2

Da Cha 2

Xiaocha

Timpani B

Concert Tom 2

Da Gu mp

Mang Luo Low

Timpani C

Concert Tom 1

Da Gu Rim

Mang Luo Mid

Timpani C#

Finger Cymbal

Da Gu f

Qing

Timpani D

Gong

Da Gu Hand

Finger Bell

Timpani D#

Ride Cymbal Tip

Da Gu Roll

Luo Big

Timpani High E

China Cymbal

Pai Gu 4

Muyu Low

Gran Cassa Hard

Ride Cymbal Cup

Pai Gu 4 High

Muyu Mid-Low

Gran Cassa Soft

Tambourine

Pai Gu 3

Muyu Mid

Gran Cassa Hit

Splash Cymbal

Pai Gu 3 High

Gran Cassa Cresc

Pai Gu 2

ConcertSnareDrum

Pai Gu 2 High

Snare Roll

Pai Gu 1

Snare Drum Light

Ban

Luo High 1

Bongo H Stick

Snare Ensemble

Bangu Roll

Gong Batter

Bongo L Stick

Sus Cym 1 Roll S

ChineseOperaVo 1

Jin Luo

Conga H Stick

Sus Cymbal 1

ChineseOperaVo 2

Luo High 2

Conga L Stick

Sus Cym 2 Roll L

ChineseOperaVo 3

Luo Mid-Low

Whip

Sus Cymbal 2

Yunluo F

Luo

Rotating Tom 5

Concert Tom 5

Yunluo F#

Jin Luo Low

Tubular Bell L

OrchCymbal 1 ckd

Yunluo G

Da Cha 1

Rotating Tom 4

Concert Tom 4

Yunluo G#

Da Cha Effect

Tubular Bell M

Orch Cymbal 1

Yunluo A

Zhongcha

Rotating Tom 3

Concert Tom 3

Yunluo A#

Xiaocha Effect

Tubular Bell H

Orch Cymbal 2

Yunluo B

Xiaocha

Rotating Tom 2

Concert Tom 2

Yunluo C

Mang Luo Low

Rotating Tom 1

Concert Tom 1

Yunluo C#

Mang Luo Mid

Temple Block H

Finger Cymbal

Yunluo D

Qing

Temple Block L

Gong

Yunluo D#

Finger Bell

Claves

Ride Cymbal Tip

Yunluo E

Luo Big

Wood Block H

China Cymbal

Yunluo High F

Muyu Low

Wood Block L

Ride Cymbal Cup

Yunluo High F#

Muyu Mid-Low

Anveil

Tambourine

Yunluo High G

Muyu Mid

Triangle Roll

Splash Cymbal

Yunluo High G#

Muyu High

Triangle Mute

Cowbell

Yunluo High A

Nanbangzi Roll

Triangle Open

Jingle Ring

Yunluo High A#

Nanbangzi

Bell Tree

Castanet Roll

Yunluo High B

Bangu

Sleigh Bells

Table Castanet

Yunluo High C

Wind Chime

(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%

(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&
&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ
%
&

&ᅊ
'
'ᅊ
(
)
)ᅊ
*
*ᅊ
$
$ᅊ

Preset 2 (PK)
Snare Ensemble

'ᅊ

Preset 1 (LK)
-

&ᅊ

Preset 1 (UK)

Luo High 1

&ᅊ

Preset 2 (PK)

OrchestraPerc

Preset 1 (LK)

Preset 1 (UK)

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion

Creating a User Keyboard
Percussion Kit
You can create your own original Keyboard Percussion
kit by assigning specific drum/percussion sounds to the
notes on the keyboard. To do this, assign your desired Kit
(pages 85 – 94) to a User Keyboard Percussion (any of
User 1 – 40), then assign each desired drum/percussion
sound to any key or pedal. The created User Keyboard
Percussion kit can be called up via the KEYBOARD
PERCUSSION [1] or [2] button. In the instructions
below, drum sounds are assigned to User 1 and called up
with the KEYBOARD PERCUSSION [1] button.

By default, the same data as the Preset 1 – 2 of the EL Kit is
stored to User Keyboard Percussion 1 and 2.

Turn on the Keyboard Percussion
function by pressing the KEYBOARD
PERCUSSION [1] button.
The K.B.P. display appears.

Press [USER 1] on the display.
This procedure assigns User 1 to the KEYBOARD
PERCUSSION [1] button.
This lets you call up the User 1 settings the next time
you press the [1] button.

3
4

Select the desired drum instrument that
you wish to assign to a key.

Rhythm/Keyboard Percussion

NOTE

Select the desired drum instrument category with
the category buttons in the display. The drum
instrument menu of the selected category appears.
Drum Instrument Category

Press the [ASSIGN] button at the right
top on the display to call up the ASSIGN
page.
Press the [KIT CHANGE] button at the
center on the display to call up the Kit
list of the Keyboard Percussion, then
select the desired kit.
Drum Instrument Menu

Reference page
• Kit Assign List (page 85)

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion

Assign an instrument to a particular key
or pedal by simultaneously holding
down the desired instrument name in
the display and pressing the key (or
pedal) to which the instrument is to be
assigned.

To erase one instrument:
Simultaneously hold down the [CLEAR] button in the
display (ASSIGN Page) and press the key (or pedal)
corresponding to the instrument you wish to erase.

The key to which the instrument is to be assigned

Instrument Name

Hold down the Instrument
name…

NOTICE

Press the key.

7
8

The Keyboard Percussion setting you have created is
automatically saved when you switch to another display.
While data is being saved, the square at the top left of the
display turns light blue for a few seconds. Do not turn the
power off while the Keyboard Percussion settings are being
saved.

When the assignment is complete, the key name and
instrument name is displayed at the top of the
display. The assignments are saved to the User
memory selected in step 2 (in this example, User 1).

To erase all instruments:

Repeat the operation steps above as
necessary to construct your own User
Keyboard Percussion set.

You can clear all assignments using the [CLEAR] button
in the display (ASSIGN Page).

Press, then release the [CLEAR] button.
The following display appears, prompting
confirmation of the operation.

From the Menu page of Keyboard
Percussion, select the User number
which you wish to use for your
performance.
When you select “User 5” on the K.B.P. [1] page for
example, pressing the KEYBOARD PERCUSSION
[1] button will call up the User 5 of the Keyboard
Percussion.
NOTE
The User Keyboard Percussion data cannot be stored to
Registration Memory; only the on/off status of the [1]/[2]
buttons and which Keyboard Percussion kit (from Preset 1
– 2 and User 1 – 40) is selected can be stored there. When
you want to save the User Keyboard Percussion data
together with the current Registration Memory data,
execute the Save operation to the USB flash drive
(page 118). All 40 User Keyboard Percussion kits can be
saved for each Unit separately.

ELS-02/ELS-02C Owner’s Manual

Press [CLEAR] in the display to erase all
data. When [CLEAR] is selected, a
“Completed” message momentarily
appears on the display.
Press [CANCEL] in the display to abort the
operation.

Keyboard Percussion

Copying the Keyboard Percussion
settings
You can copy the Preset Keyboard Percussion to one of
the User locations, or copy from one User location to
another. In the instructions below, Preset 1 is copied to
User 1.

A message appears, prompting confirmation of the
operation.

Press the KEYBOARD PERCUSSION [1]
button to copy Preset 1.

Detailed settings for each
percussion instrument
You can independently adjust the settings of pan, pitch,
reverb and volume for each instrument. The settings here
are system settings that cannot be memorized to
Registration memory.

1
2
3

Press the [COPY FROM] button in the
display.
A list appears, letting you select the copy source
location.

Turn off the volume of the relevant
keyboard (the keyboard to which the
instrument to be changed is assigned).

5
Rhythm/Keyboard Percussion

Within the Menu buttons, select the
User location as the destination — for
example, User 1.

Press the [COPY] button in the display
to copy Preset 1. When [COPY] is
selected, a “Completed” message
momentarily appears in the display.
Press the [CANCEL] button in the display to abort
the operation.

To copy Preset 1, select the [1] button; to copy Preset
2, select the [2] button.
To copy either User location, select button [1] or [2].

Select the copy source (Preset 1 here)
from the list.

Press the [SETUP] button at the top
right of the K.B.P. display to call up the
SETUP Page.
Press the appropriate key (the key to
which the instrument to be changed is
assigned).
The selected instrument’s name is shown on the
display and you can change its settings.

The name of the
selected instrument

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion

1 PAN
Determines the position of the currently selected
instrument in the stereo image. Seven pan positions are
available.

2 PITCH COARSE
Adjusts the pitch of the currently selected instrument by
100 cents.
Range: -64 – +63

3 PITCH FINE
Adjusts the pitch of the currently selected instrument by
one cent, allowing more detailed tuning of the instrument
than PITCH COARSE (2).
Range: -64 – +63

4 REVERB
Determines the amount of reverb applied to the currently
selected instrument.
Range: 0 – 24

5 VOLUME
Determines the volume of the currently selected
instrument.
Range: 0 – 24

6 RESET
Initializes settings such as pan, pitch, and reverb to their
default values.
Pressing the [EXECUTE] button calls up the following
display, prompting confirmation of the operation.

Press the [EXECUTE] button in the display to restore
(initialize) the default settings.
When [EXECUTE] is selected, a “Complete” message
momentarily appears on the display.
Press the [CANCEL] button in the display to abort the
operation.

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion

Kit Assign list
EL Kit
CYMBAL
•
•
•
•
•
•
•
•
•
•
•
•

Crash Cymbal 1
Crash Cymbal 2
Crash Cym Mute
Ride Cymbal 1
Ride Cymbal 2
Ride Cymbal Cup
Orchestra Cymbal
Orch Cymbal Roll
Orch Cymbal Mute
Cymbal March
Cym Brush Shot
Tam-Tam

•
•
•
•
•
•

Hi-Hat Open
Hi-Hat Closed
Hi-Hat Pedal 1
Hi-Hat Pedal 2
Analog HH Open
Analog HH Closed

SNARE DRUM
•
•
•
•
•
•
•
•
•
•
•
•

Snare Drum Light
Snare Drum Heavy
Snare Drum Rim 1
Snare Drum Rim 2
SD Accent 1
SD Accent 2
SD Reverb 1
SD Reverb 2
Synth Snare Drum
Orch Snare Drum
Snare Drum Roll
Analog SD

SNARE BRUSH
• SD Brush Shot 1
• SD Brush Shot 2
• SD Brush Roll
TOM
•
•
•
•
•
•
•
•
•
•
•

Tom 1
Tom 2
Tom 3
Tom 4
Tom Brush Shot 1
Tom Brush Shot 2
Tom Brush Shot 3
Tom Brush Shot 4
Synth Tom 1
Synth Tom 2
Synth Tom 3

BASS DRUM
•
•
•
•
•
•
•
•

Bass Drum Light
Bass Drum Heavy
Bass Drum Attack
Synth Bass Drum
Bass Drum March
Concert BD
Analog BD Short
Analog BD Long

CONGA/BONGO
•
•
•
•
•
•

Conga High
Conga Low
Conga Slap
Conga Muff
Conga Slide
Bongo High

CUICA/SURDO
•
•
•
•
•
•
•
•
•

Cuica High
Cuica Middle
Cuica Low
Tamborim Open
Tamborim Mute
Surdo Open
Surdo Mute
Surdo Rim
Surdo Muff

Standard Kit 1
CYMBAL
•
•
•
•
•
•
•
•
•
•

Crash Cymbal 1
Crash Cymbal 2
Splash Cymbal
Chinese Cymbal
Ride Cymbal 1
Ride Cymbal 2
Ride Cymbal Cup
Hi-Hat Open
Hi-Hat Closed
Hi-Hat Pedal

TIMBALES/COWBELL

SNARE DRUM

•
•
•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•
•
•

Timbale 1 High
Timbale 1 Low
Timbale 2 High
Timbale 2 Low
Timbale 3 High
Timbale 3 Low
Timbale 4 High
Timbale 4 Low
Cowbell 1
Cowbell 2
Cowbell 3
Cowbell 4

PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•

Cabasa
Shaker
Maracas High
Maracas Low
Guiro Short
Guiro Long
Wood Block High
Wood Block Mid
Wood Block Low
Claves
Castanet
Vibraslap

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•
•
•
•

Agogo High
Agogo Low
Triangle Open
Triangle Mute
Wind Chime Down
Wind Chime Up
Tambourine
Pandeiro
Bells
Hand Claps
Finger Snap
Scratch
Noise Percussion

PERCUSSION 3
•
•
•
•
•
•
•
•
•
•
•
•
•

Kotsuzumi 1
Kotsuzumi 2
Kotsuzumi 3
Kotsuzumi 4
Ohtsuzumi 1
Ohtsuzumi 2
Taiko 1
Taiko 2
Ohdaiko 1
Ohdaiko 2
Kakegoe 1
Kakegoe 2
Kakegoe 3

Snare
Snare Tight
Snare Soft
Snare Roll
Side Stick
Open Rim Shot
Brush Tap
Brush Slap
Brush Swirl
Brush Tap Swirl

TOM
•
•
•
•
•
•

Floor Tom L
Floor Tom H
Low Tom
Mid Tom L
Mid Tom H
High Tom

BASS DRUM
• Kick
• Kick Tight
• Kick Soft
PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•
•

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

PERCUSSION 3
•
•
•
•
•
•

Tambourine
Castanet
Jingle Bells
Bell Tree
Triangle Open
Triangle Mute

•
•
•
•
•
•

Wood Block H
Wood Block L
Sticks
Whip Slap
Finger Snap
Hand Clap

PERCUSSION 4
•
•
•
•
•
•
•
•

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

Standard Kit 2
CYMBAL
•
•
•
•
•
•
•
•
•
•

Crash Cymbal 1
Crash Cymbal 2
Splash Cymbal
Chinese Cymbal
Ride Cymbal 1
Ride Cymbal 2
Ride Cymbal Cup
Hi-Hat Open
Hi-Hat Closed
Hi-Hat Pedal

5
Rhythm/Keyboard Percussion

HI-HAT

• Bongo Low
• Bongo Slap
• Bongo Mute

SNARE DRUM
•
•
•
•
•
•
•
•
•
•

Snare Short
Snare Tight H
Snare Soft 2
Snare Roll
Side Stick Light
Open Rim Shot H
Brush Tap
Brush Slap
Brush Swirl
Brush Tap Swirl

TOM
•
•
•
•
•
•

Floor Tom L
Floor Tom H
Low Tom
Mid Tom L
Mid Tom H
High Tom

BASS DRUM
• Kick Short
• Kick Tight
• Kick Soft
PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•
•

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion
PERCUSSION 2

PERCUSSION 1

TOM

• Hi-Hat Pedal

•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•

SNARE DRUM

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

PERCUSSION 3
•
•
•
•
•
•
•
•
•
•
•
•

Tambourine
Castanet
Jingle Bells
Bell Tree
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap
Finger Snap
Hand Clap

PERCUSSION 4
•
•
•
•
•
•
•
•

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

Hit Kit
CYMBAL
•
•
•
•
•
•
•
•
•
•

Crash Cymbal 1
Crash Cymbal 2
Splash Cymbal
Chinese Cymbal
Ride Cymbal 1
Ride Cymbal 2
Ride Cymbal Cup
Hi-Hat Open 2
Hi-Hat Closed 2
Hi-Hat Pedal 2

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

PERCUSSION 3
•
•
•
•
•
•
•
•
•
•
•
•

Tambourine Light
Castanet
Jingle Bells
Bell Tree
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap
Finger Snap
Hand Clap

PERCUSSION 4
•
•
•
•
•
•
•
•

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

SNARE DRUM
•
•
•
•
•
•
•
•
•
•

Snare Ambient
Snare Tight 2
Snare Electro
Snare Roll
Stick Ambient
Snare Pitched
Brush Tap
Brush Slap
Brush Swirl
Brush Tap Swirl

TOM
•
•
•
•
•
•

Hybrid Tom 1
Hybrid Tom 2
Hybrid Tom 3
Hybrid Tom 4
Hybrid Tom 5
Hybrid Tom 6

BASS DRUM
• Kick Tight H
• Kick Wet
• Kick Tight L

Room Kit
CYMBAL
•
•
•
•
•
•
•
•
•
•

Crash Cymbal 1
Crash Cymbal 2
Splash Cymbal
Chinese Cymbal
Ride Cymbal 1
Ride Cymbal 2
Ride Cymbal Cup
Hi-Hat Open
Hi-Hat Closed
Hi-Hat Pedal

Tom Room 1
Tom Room 2
Tom Room 3
Tom Room 4
Tom Room 5
Tom Room 6

BASS DRUM
• Kick
• Kick Tight
• Kick Soft
PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•
•

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

PERCUSSION 3
•
•
•
•
•
•
•
•
•
•
•
•

Tambourine
Castanet
Jingle Bells
Bell Tree
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap
Finger Snap
Hand Clap

PERCUSSION 4
•
•
•
•
•
•
•
•

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

Rock Kit

SNARE DRUM
•
•
•
•
•
•
•
•
•
•

Snare Snappy
Snare Tight Snap
Snare Soft
Snare Roll
Side Stick
Open Rim Shot
Brush Tap
Brush Slap
Brush Swirl
Brush Tap Swirl

ELS-02/ELS-02C Owner’s Manual

•
•
•
•
•
•
•
•
•
•

Snare Rock
Snare Rock Tight
Snare Noisy
Snare Roll
Side Stick
Open Rim Shot
Brush Tap
Brush Slap
Brush Swirl
Brush Tap Swirl

TOM
•
•
•
•
•
•

Tom Rock 1
Tom Rock 2
Tom Rock 3
Tom Rock 4
Tom Rock 5
Tom Rock 6

BASS DRUM
• Kick Gate
• Kick 2
• Kick Soft
PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•
•

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

PERCUSSION 3
•
•
•
•
•
•
•
•
•
•
•
•

Tambourine
Castanet
Jingle Bells
Bell Tree
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap
Finger Snap
Hand Clap

CYMBAL

PERCUSSION 4

•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•

Crash Cymbal 1
Crash Cymbal 2
Splash Cymbal
Chinese Cymbal
Ride Cymbal 1
Ride Cymbal 2
Ride Cymbal Cup
Hi-Hat Open
Hi-Hat Closed

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

Keyboard Percussion

Electro Kit

• Finger Snap
• Hand Clap

CYMBAL

PERCUSSION 4

•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•

Crash Cymbal 1
Crash Cymbal 2
Splash Cymbal
Chinese Cymbal
Ride Cymbal 1
Ride Cymbal 2
Ride Cymbal Cup
Hi-Hat Open
Hi-Hat Closed
Hi-Hat Pedal

Analog Kit

SNARE DRUM
Snare Noisy 2
Snare Noisy 3
Snare Snap Elec
Snare Roll
Side Stick
Open Rim Shot
Brush Tap
Brush Slap
Brush Swirl
Reverse Cymbal

TOM
•
•
•
•
•
•

Tom Electro 1
Tom Electro 2
Tom Electro 3
Tom Electro 4
Tom Electro 5
Tom Electro 6

BASS DRUM
• Kick Gate Heavy
• Kick Gate
• Kick 3
PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•
•

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•

Surdo Mute
Surdo Open
Scratch H 2
Scratch L 2
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

PERCUSSION 3
•
•
•
•
•
•
•
•
•
•

Tambourine
Hi Q 2
Jingle Bells
Bell Tree
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap

PERCUSSION 3
•
•
•
•
•
•
•
•
•
•
•
•

Tambourine
Hi Q 2
Jingle Bells
Bell Tree
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap
Finger Snap
Hand Clap

CYMBAL

PERCUSSION 4

•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•

Crash Analog
Crash Cymbal 2
Splash Cymbal
Chinese Cymbal
Ride Cymbal 1
Ride Cymbal 2
Ride Cymbal Cup
Hat Open Analog
Hat Close Analog
Hat Close Anlg 2

Dance Kit

SNARE DRUM
•
•
•
•
•
•
•
•
•
•

Snare Analog
Snare Analog 2
Snare Noisy 4
Snare Roll
Side Stick Anlg
Open Rim Shot
Brush Tap
Brush Slap
Brush Swirl
Reverse Cymbal

TOM
•
•
•
•
•
•

Tom Analog 1
Tom Analog 2
Tom Analog 3
Tom Analog 4
Tom Analog 5
Tom Analog 6

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

•
•
•
•
•
•
•
•
•
•
•
•

Tambourine Anlg
Hi Q 2
Jingle Bells
Bell Tree
Triangle Open
Triangle Mute
Dance Perc 3
Dance Perc 4
Snare Dance 1
Whip Slap
Finger Snap
Dance Clap

Snare Clap
Snare Dry
Snare Techno
Reverse Dance 2
Side Stick Anlg
Rim Gate
Snare Analog 3
Snare Analog 4
Vinyl Noise
Reverse Cymbal

•
•
•
•
•
•

Tom Dance 1
Tom Dance 2
Tom Dance 3
Tom Dance 4
Tom Dance 5
Tom Dance 6

Hi Q
Click Noise
Scratch Dance 1
Scratch Dance 2
Dance Perc 2
Hi Q Dance 1
Dance Perc 1
Reverse Dance 1

CYMBAL
•
•
•
•
•
•
•
•
•
•

Crash Cymbal 1
Crash Cymbal 2
Splash Cymbal
Chinese Cymbal
Ride Cymbal 1
Ride Cymbal 2
Ride Cymbal Cup
Hi-Hat Open
Hi-Hat Closed
Hi-Hat Pedal

SNARE DRUM

• Kick Techno
• Kick Techno L
• Kick Techno Q

•
•
•
•
•
•
•
•
•
•

PERCUSSION 1

TOM

•
•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•

BASS DRUM

Conga Analog M
Conga Analog L
Conga Analog H
Bongo Analog H
Bongo Analog L
Timbale H
Timbale L
Cowbell Dance
Claves 2
Guiro Long
Guiro Short

Jazz Kit

SNARE DRUM

TOM

Surdo Mute
Surdo Open
Scratch H 2
Scratch L 2
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H

PERCUSSION 3

•
•
•
•
•
•
•
•

Crash Analog
Crash Cymbal 2
Splash Cymbal
Chinese Cymbal
Ride Cymbal 1
Ride Analog
Ride Cymbal Cup
Hi-Hat Open 3
Hi-Hat Closed 3
Hat Close Anlg 3

•
•
•
•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•
•

Kick Dance 1
Kick Dance 2
Dance Breath 1
Dance Breath 2
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

•
•
•
•
•
•
•
•
•
•

PERCUSSION 1

PERCUSSION 2

•
•
•
•
•
•
•
•
•
•

PERCUSSION 4

• Kick Analog
• Kick Anlg Short
• Kick 3

Conga Analog M
Conga Analog L
Conga Analog H
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell Analog
Claves 2
Guiro Long
Guiro Short
Maracas 2
Vibraslap

PERCUSSION 2

CYMBAL

•
•
•
•
•
•
•
•
•
•

BASS DRUM

• Maracas 2
• Vibraslap Analog

Rhythm/Keyboard Percussion

•
•
•
•
•
•
•
•
•
•

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

• Samba Whistle L

Snare Jazz L
Snare Jazz M
Snare Jazz H
Snare Roll
Side Stick Light
Open Rim Shot
Brush Tap
Brush Slap
Brush Swirl
Brush Tap Swirl

Floor Tom L
Floor Tom H
Low Tom
Mid Tom L
Mid Tom H
High Tom

BASS DRUM
• Kick Jazz
• Kick Tight
• Kick Soft

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion
PERCUSSION 1

TOM

• Hi-Hat Pedal

•
•
•
•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•

SNARE DRUM

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

PERCUSSION 3
•
•
•
•
•
•
•
•
•
•
•
•

Tambourine
Castanet
Jingle Bells
Bell Tree
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap
Finger Snap
Hand Clap

PERCUSSION 4
•
•
•
•
•
•
•
•

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

Brush Kit
CYMBAL
•
•
•
•
•
•
•
•
•
•

Crash Cymbal 1
Crash Cymbal 2
Splash Cymbal
Chinese Cymbal
Ride Cymbal 1
Ride Cymbal 2
Ride Cymbal Cup
Hi-Hat Open
Hi-Hat Closed
Hi-Hat Pedal

Tom Brush 1
Tom Brush 2
Tom Brush 3
Tom Brush 4
Tom Brush 5
Tom Brush 6

BASS DRUM
• Kick Jazz
• Kick Tight
• Kick Soft
PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•
•

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

PERCUSSION 3
•
•
•
•
•
•
•
•
•
•
•
•

Tambourine
Castanet
Jingle Bells
Bell Tree
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap
Finger Snap
Hand Clap

PERCUSSION 4
•
•
•
•
•
•
•
•

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

Symphony Kit

SNARE DRUM
•
•
•
•
•
•
•
•
•
•

Brush Slap 3
Brush Tap 2
Brush Slap 2
Snare Roll
Side Stick Light
Open Rim Shot
Brush Tap
Brush Slap
Brush Swirl
Brush Tap Swirl

•
•
•
•
•
•
•
•
•
•

Band Snare
Band Snare 2
Snare Soft
Snare Roll
Side Stick
Open Rim Shot
Brush Tap
Brush Slap
Brush Swirl
Brush Tap Swirl

TOM
•
•
•
•
•
•

Floor Tom L
Floor Tom H
Low Tom
Mid Tom L
Mid Tom H
High Tom

Crash Cymbal 1
Crash Cymbal 2
Splash Cymbal
Chinese Cymbal
Ride Cymbal 1
Ride Cymbal 2
Ride Cymbal Cup
Hi-Hat Open
Hi-Hat Closed
Hi-Hat Pedal

SNARE DRUM

• Gran Cassa Mute
• Gran Cassa
• Kick Soft 2
PERCUSSION 1

TOM

•
•
•
•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•

BASS DRUM

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

PERCUSSION 3
•
•
•
•
•
•
•
•
•
•
•
•

Tambourine
Castanet
Jingle Bells
Bell Tree
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap
Finger Snap
Hand Clap

PERCUSSION 4

•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•

ELS-02/ELS-02C Owner’s Manual

•
•
•
•
•
•
•
•
•
•

CYMBAL
Hand Cymbal
Hand Cymbal 2
Splash Cymbal
Chinese Cymbal
Hand Cymbal S
Hand Cymbal 2 S
Ride Cymbal Cup
Hi-Hat Open
Hi-Hat Closed

Live!StudioKit
CYMBAL

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

Snare Studio M
Snare Studio L
Snare Studio 2
Snare Roll
Side Stick
Open Rim Shot
Brush Tap
Brush Slap
Brush Swirl
Brush Tap Swirl

Floor Tom L
Floor Tom H
Low Tom
Mid Tom L
Mid Tom H
High Tom

BASS DRUM
• Kick Studio
• Kick Ambience L
• Kick Ambience H
PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•
•

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

PERCUSSION 3
•
•
•
•
•
•
•
•
•
•

Tambourine
Castanet
Jingle Bells
Bell Tree
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap

Keyboard Percussion
• Finger Snap
• Hand Clap
PERCUSSION 4
•
•
•
•
•
•
•
•

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

Live!AcousticKit

• Samba Whistle L
PERCUSSION 3
•
•
•
•
•
•
•
•
•
•
•
•

Tambourine
Castanet
Jingle Bells
Wind Chime
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap
Finger Snap
Hand Clap Power

PERCUSSION 4

•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•

CrashCymbalAco 1
CrashCymbalAco 2
SplashCymbal Aco
China Cymbal Aco
RideCymbal Aco 1
RideCymbal Aco 2
RideCymbalCupAco
Hi-Hat Open Aco
Hi-HatClosedAco
Hi-HatPedal Aco

Live!PowerKit1

SNARE DRUM
•
•
•
•
•
•
•
•
•
•

Snare Acoustic
Snare Rough Aco
Snare Soft Aco
Snare Roll Aco
Stick Acoustic
Rim Acoustic
Brush Tap
Brush Slap
Brush Swirl
Brush Tap Swirl

TOM
•
•
•
•
•
•

Tom Acoustic 1
Tom Acoustic 2
Tom Acoustic 3
Tom Acoustic 4
Tom Acoustic 5
Tom Acoustic 6

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

Tambourine
Castanet
Jingle Bells
Wind Chime
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap
Finger Snap
Hand Clap Power

Snare Power 1
Snare Rough 1
SnareSoftPower 1
Snare Roll
Side Stick Power
Open Rim Power 1
Brush Tap
Brush Slap
Brush Swirl
Brush Tap Swirl

•
•
•
•
•
•

Tom Power 1
Tom Power 2
Tom Power 3
Tom Power 4
Tom Power 5
Tom Power 6

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

Live!PowerKit2

SNARE DRUM

TOM

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H

•
•
•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•

CrashCymbalAco 1
CrashCymbalAco 2
SplashCymbal Aco
China Cymbal Aco
RideCymbal Aco 1
RideCymbal Aco 2
RideCymbalCupAco
Hi-HatOpen Power
Hi-HatClosePower
Hi-HatPedalPower

•
•
•
•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•
•

PERCUSSION 3

•
•
•
•
•
•
•
•
•
•

PERCUSSION 1

PERCUSSION 2

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

CYMBAL

• Kick Mute Aco
• Kick Open Aco
• Kick Soft Aco

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

•
•
•
•
•
•
•
•
•
•

PERCUSSION 4

•
•
•
•
•
•
•
•
•
•

BASS DRUM

PERCUSSION 2

CYMBAL
•
•
•
•
•
•
•
•
•
•

CrashCymbalAco 1
CrashCymbalAco 2
SplashCymbal Aco
China Cymbal Aco
RideCymbal Aco 1
RideCymbal Aco 2
RideCymbalCupAco
Hi-HatOpen Power
HH Closed PW Eg
Hi-HatPedalPower

SNARE DRUM

• Kick Power Mute
• Kick Power Open
• Kick Ambient+

•
•
•
•
•
•
•
•
•
•

PERCUSSION 1

TOM

•
•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•

BASS DRUM

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short

Snare Power 2
Snare Rough 2
SnareSoftPower 2
Snare Roll
Side Stick Power
Open Rim Power 2
Brush Tap
Brush Slap
Brush Swirl
Brush Tap Swirl

Tom Power 1
Tom Power 2
Tom Power 3
Tom Power 4
Tom Power 5
Tom Power 6

BASS DRUM
• Kick Power Mute
• Kick Power Open
• Kick Ambient+

PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•
•

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

PERCUSSION 3
•
•
•
•
•
•
•
•
•
•
•
•

Tambourine
Castanet
Jingle Bells
Wind Chime
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap
Finger Snap
Hand Clap Power

5
Rhythm/Keyboard Percussion

CYMBAL

• Maracas
• Vibraslap

PERCUSSION 4
•
•
•
•
•
•
•
•

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

Live!Rock Kit
CYMBAL
•
•
•
•
•
•
•
•
•
•

CrashCymbalAco 1
CrashCymbalAco 2
SplashCymbal Aco
China Cymbal Aco
RideCymbal Aco 1
RideCymbal Aco 2
RideCymbalCupAco
Hi-Hat Open Rock
Hi-HatClosedRock
Hi-HatPedal Rock

SNARE DRUM
•
•
•
•
•
•
•
•
•
•

Snare Rock
Snare Dry Rock
Snare Soft Rock
Snare Roll Rock
Stick Rock
Rim Rock
Brush Tap
Brush Slap
Brush Swirl
Brush Tap Swirl

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion
TOM

• Hi-Hat PedalReal

•
•
•
•
•
•

SNARE DRUM

Tom Rock 1
Tom Rock 2
Tom Rock 3
Tom Rock 4
Tom Rock 5
Tom Rock 6

BASS DRUM
• Kick Rock
• Kick Rock Heavy
• Kick Soft Rock
PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•
•

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

•
•
•
•
•
•
•
•
•

Snare Real 1
Snare Real 2
Snare Tight
Snare Roll Rock
Stick Real
Rim Real
Brush Tap
Brush Slap
Brush Tap Swirl

TOM
•
•
•
•
•
•

Tom Real 1
Tom Real 2
Tom Real 3
Tom Real 4
Tom Real 5
Tom Real 6

BASS DRUM
• Kick Real 1
• Kick Real 2
• Kick Genuine
PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•
•

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

PERCUSSION 3

PERCUSSION 2

•
•
•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•
•
•

Tambourine
Castanet
Jingle Bells
Wind Chime
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap
Finger Snap
Hand Clap Power

PERCUSSION 4
•
•
•
•
•
•
•
•

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

Live!Real Drums

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

PERCUSSION 3
•
•
•
•
•
•
•
•
•
•
•
•

Tambourine
Castanet
Jingle Bells
Wind Chime
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Sticks
Whip Slap
Finger Snap
Clap Power

PERCUSSION 4
CYMBAL
•
•
•
•
•
•
•
•
•

CrashCymbalReal1
CrashCymbalReal2
SplashCymbalReal
ChinaCymbal Real
RideCymbalReal 1
RideCymbalReal 2
RideCym Cup Real
Hi-Hat Open Real
Hi-HatClosedReal

•
•
•
•
•
•
•
•

Hi Q
Click Noise
Scratch H
Scratch L
Seq Click L
Seq Click H
Metronome Click
Metronome Bell

ELS-02/ELS-02C Owner’s Manual

Live!RealBrushes
CYMBAL
•
•
•
•
•
•
•
•
•
•

CrashCymbal RB 1
CrashCymbal RB 2
Splash Cymbal RB
ChinaCymbal RB
Ride Cymbal RB
Ride Cup RB 1
Ride Cup RB 2
Hi-Hat Open RB
Hi-Hat Closed RB
Hi-Hat Pedal RB

•
•
•
•

PERCUSSION 4
•
•
•
•
•
•

Vintage Slap 1
Vintage Slap 2
Vintage Slap 3
Vintage Slap 4
Vintage Slap 5
VintageSlapSwirl
Vintage Swirl 1
Vintage Swirl 2
Vintage Swirl 3
Vintage TapSwirl
Vintage Tip
Stick Brush
Open Rim Shot RB

TOM
•
•
•
•
•
•

TomRealBrushes 1
TomRealBrushes 2
TomRealBrushes 3
TomRealBrushes 4
TomRealBrushes 5
TomRealBrushes 6

BASS DRUM
• KickJazzAmbience
• Kick Soft H
• Kick Soft L
PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•
•

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Timbale H
Timbale L
Cowbell
Claves
Guiro Long
Guiro Short
Maracas
Vibraslap

Hi Q
Click Noise
Scratch H
Scratch L
Metronome Bell
Metronome Click

Analog T8 Kit

SNARE DRUM
•
•
•
•
•
•
•
•
•
•
•
•
•

Sticks
Whip Slap
Finger Snap
Clap Power

CYMBAL
•
•
•
•
•
•
•
•
•
•

Crash Cymbal T8
Crash Cymbal 4
Splash Cymbal
China Cymbal 2
Ride Cymbal T9
Ride Cymbal 3
RideCymbal Cup 2
Hi-Hat Open T8
Hi-Hat Closed T8
Hi-Hat Pedal T8

SNARE DRUM 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Snare T8 1
Snare T8 2
Snare T8 3
Snare T8 4
Snare T8 5
Snare T8 6
Snare T8 7
Snare T8 Rim
Snare Analog CR
SnareClap Analog
Snare Break 1
Snare Garg L
Snare Fx 1
Snare Hammer

SNARE DRUM 2
• Snare Hip 1
• Snare Hip 2
• Snare Hip Gate
TOM
•
•
•
•
•
•
•

Tom T8 1
Tom T8 2
Tom T8 3
Tom T8 4
Tom T8 5
Tom T8 6
Tom T8 7

PERCUSSION 2

BASS DRUM

•
•
•
•
•
•
•
•
•
•

Surdo Mute
Surdo Open
Cuica Mute
Cuica Open
Cabasa
Shaker
Agogo H
Agogo L
Samba Whistle H
Samba Whistle L

Kick T8 1
Kick T8 2
Kick T8 3
Kick T8 4
T8 Kick Bass
Kick Slimy
Kick Blip
Kick Tek Power
Kick Fx Hammer
Kick Zap Hard

PERCUSSION 3

PERCUSSION 1

•
•
•
•
•
•
•

Tambourine
Jingle Bells
Wind Chime
Triangle Open
Triangle Mute
Wood Block H
Wood Block L

Conga T8 1
Conga T8 2
Conga T8 3
Conga T8 4
Conga T8 5
Timbale H
Timbale L

Keyboard Percussion
•
•
•
•
•
•

Cowbell T8
Claves T8
Glass H
Glass L
Maracas T8
Vibraslap

PERCUSSION 2
•
•
•
•
•
•

Surdo Mute
Surdo Open
Cabasa
Analog Shaker
Analog Shaker H
Analog Shaker L

PERCUSSION 3
Tambourine RX5
Sleigh Bells
Wind Chime
Triangle Open
Triangle Mute
Clap T9
Whip Slap

PERCUSSION 4
•
•
•
•
•
•
•
•
•

Hi Q
Hi Q 1
Hi Q 2
Scratch H
Scratch L
Scratch H 2
Scratch L 2
Fx Gun 1
Fx Gun 2

Analog T9 Kit
CYMBAL
•
•
•
•
•
•
•
•
•
•

Crash Cymbal T9
Splash Cymbal 2
Crash Cymbal 4
China Cymbal 2
Ride Cymbal T9
Ride Cymbal 3
RideCymbal Cup 2
Hi-Hat Open T9
Hi-Hat Closed T9
Hi-Hat Pedal T9

SNARE DRUM 1
•
•
•
•
•
•
•
•
•
•

Snare T9 1
Snare T9 2
Snare T9 3
Snare T9 4
Snare T9 5
Snare T9 6
Snare T8 7
Snare T9 Gate 1
Snare T9 Gate 2
Snare T9 Rim

SNARE DRUM 2
•
•
•
•
•
•
•
•

Snare Drum&Bass1
Snare Jungle 1
Snare Distortion
Snare Analog CR
Snare Brush Mute
SnareRckRollDist
Snare Piccolo
Snare Rock Roll

•
•
•
•
•
•
•
•
•

Kick T9 1
Kick T9 2
Kick T9 3
Kick T9 4
Kick Tek Power
Kick Sustain
Kick Blip Hard
KickDistortionRM
Kick Break 2

PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•

Conga T8 1
Conga T8 4
Conga T8 5
Conga Open
Conga Open Slap
Conga Tip
Timbale H
Timbale L
Cowbell 1
Cowbell T8
Maracas Slur 2

PERCUSSION 2
•
•
•
•

Surdo Mute
Surdo Open
Cabasa
Analog Shaker

PERCUSSION 3
•
•
•
•
•
•
•
•
•

Tambourine RX5
Sleigh Bells
Wind Chime
Triangle Open
Triangle Mute
Clap T9
Clap Analog Sm
Analog Click
Whip Slap

PERCUSSION 4
•
•
•
•
•
•
•
•
•
•
•
•

Hi Q
Hi Q 1
Hi Q 2
Hi Q 3
Scratch H
Scratch H 2
Scratch H 3
Scratch L
Scratch L 2
Scratch Down
Fx Gun 1
Fx Gun 2

House Kit
CYMBAL
•
•
•
•
•
•
•
•
•
•

Crash Cymbal T9
Crash Cymbal 1
Crash Cymbal 4
Splash Cymbal 2
Ride Cymbal T9
Ride Cymbal 3
RideCymbal Cup 2
Hi-Hat Open T9
Hi-Hat Closed T8
Hi-Hat Pedal T9

TOM

SNARE DRUM

•
•
•
•
•

Tom T9 1
Tom T9 2
Tom T9 3
Tom T9 4
Tom T9 5

Snare T9 1
Snare T9 2
Snare T9 3
Snare T9 5
Snare T9 Gate

•
•
•
•
•
•
•
•

Snare T9 Rim
Snare T8 1
Snare T8 5
Snare T8 Rim
Snare Garg L
Snare R&B 1
Snare Roll
Snare Break Roll

TOM
•
•
•
•
•
•

Tom T9 1
Tom T9 2
Tom T9 3
Tom T9 4
Tom T9 5
Tom T9 6

BASS DRUM
•
•
•
•
•
•

Kick T9 1
Kick T9 2
Kick T9 4
Kick T9 5
W Kick
Filter Kick

NOISE
•
•
•
•
•
•
•
•
•
•
•

PinkNoise Down 1
PinkNoise Down 2
Pink Noise Up
PinkNoise Up Rel
WhiteNoiseDown 1
WhiteNoiseDown 2
White Noise Up 1
White Noise Up 2
WhiteNoiseUp Rel
Noise Burst
Disco Fx

PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•
•

Conga H Open 2
Conga H SlapOpen
Conga H Tip
Bongo H Open 1 F
Bongo L Open 3 F
Timbale H
Timbale L
Cowbell 1
Cowbell T8
Claves
Guiro Long
Guiro Short
Maracas Slur 2

PERCUSSION 2
•
•
•
•
•
•
•

Cuica H
Cuica L
Cabasa
Agogo H
Agogo L
Analog Shaker
Udu High

PERCUSSION 3
•
•
•
•
•
•
•
•
•
•
•
•
•

Tambourine Hit
Sleigh Bells
Wind Chime
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Clap T9
Hand Clap
Vox Drum H
Vox Drum L
Vox Alk
Vox Bell

HipHop Kit
CYMBAL
•
•
•
•
•
•
•
•
•
•
•

Crash T8
Crash Cymbal 3
Ride Cymbal 3
Hi-Hat Open Hip
Hi-Hat Open T8 2
Hi-HatOpen Lo-Fi
Hi-HatClosed Hip
Hi-HatClosedT8 2
Hi-HatClosed Tek
Hi-Hat Pedal Hip
Hi-HatReverseD&B

SNARE DRUM
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Snare HipHop 1
Snare HipHop 2
Snare HipHop 3
Snare HipHop 5
Snare HipHop 6
Snare HipHop 7
Snare HipHop 11
Snare T8 1
Snare T8 1 H
Snare Clappy
SnareAnalogSmRim
SnareHipHopRim 2
SnareHipHopRim 3
SnareHipHopRim 4
SnareHipHopRim 5

TOM
•
•
•
•
•
•
•
•

5
Rhythm/Keyboard Percussion

•
•
•
•
•
•
•

• Tom T9 6
BASS DRUM

Floor Tom L
Low Tom
Mid Tom L
High Tom
Tom T8 1
Tom T8 2
Tom T8 3
Tom T8 6

BASS DRUM
•
•
•
•
•
•
•
•
•
•
•
•

Kick HipHop 1
Kick HipHop 2
Kick HipHop 3
Kick HipHop 4
Kick HipHop 5
Kick HipHop 8
Kick HipHop 9
Kick HipHop 10
Kick Hip Deep
Kick Analog CR
Kick Gate
KickGranCasaOpen

PERCUSSION 1
•
•
•
•
•

Conga H Open
Conga H Heel
Conga H Tip
Conga L Open 1
Conga L Open 2

PERCUSSION 2
•
•
•
•
•
•
•

Surdo Mute
Surdo Open
Shaker 2
HipHop flex 1
HipHop flex 2
HipHop Snap 1
HipHop Snap 2

PERCUSSION 3
•
•
•
•

TambourineLight1
TambourineLight2
Handbell H
Wind Chime

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion
•
•
•
•
•
•
•
•
•
•

Triangle Open
Triangle Mute
Whip Slap
HipHop Clap 2
HipHop Clap 3
HipHop Clap 5
HipHop Clap 6
HipHop Clap 7
Electric Clap 1
Electric Clap 2

PERCUSSION 4
•
•
•
•
•

Hi Q
Scratch H
Scratch L
ScratchBDForward
ScratchBDReverse

Drum Machine
CYMBAL
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Crash Cymbal T9
Ride Cymbal T9
Hi-Hat Open T8 1
Hi-Hat Open T8 2
Hi-Hat Open T9
Hi-Hat Open Aco
Hi-HatOpen Lo-Fi
Hi-Hat Open Syn
Hi-HatClosedT8 1
Hi-HatClosedT8 2
Hi-Hat Closed T9
Hi-HatClosed Aco
Hi-HatClosedLoFi
Hi-HatClosed Syn
Hi-Hat Pedal T9
Hi-Hat Pedal Aco

•
•
•
•

PERCUSSION 1
•
•
•
•
•
•
•
•

Snare T8 1
Snare T8 2
Snare T8 3
Snare T9 1
Snare T9 4
Snare T9 Rim
Snare R&B 1
Snare R&B 2
Snare Hip 1
Snare Timbre
Snare Wood
Snare Drum&Bass1
Snare Drum&Bass2
Snare Jungle 1
Snare Analog CR
Snare Distortion

TOM
•
•
•
•
•

Tom T9 1
Tom T9 2
Tom T9 3
Tom T9 4
Tom T9 5

BASS DRUM
•
•
•
•
•
•
•
•
•
•
•
•

Kick T8 2
Kick T8 3
Kick T9 2
Kick T9 4
Kick T9 HD 3
Kick Tek Power
Kick Break 2
KickDistortionRM
BD Drum & Bass 1
Bass Drum Dist 1
Bass Drum Dist 3
Bass Drum Dist 5

Conga T8 1
Conga T8 2
Conga T8 3
Cowbell T8
CowbellAnalog CR
Claves T8 1
Claves T8 2
Maracas T8

PERCUSSION 2
•
•
•
•
•

Surdo Mute
Surdo Open
Analog Shaker
Analog Shaker 1
Analog Shaker 2

PERCUSSION 3
•
•
•
•
•
•
•
•

Tambourine RX5 2
Tambourine 1 Hit
TambourineAna CR
ElectricTriangle
Electric Cowbell
Clap T9
Whip Slap
Electric Clap 1

PERCUSSION 4
•
•
•
•

Hi Q
Scratch H
Scratch L
Analog Click

Break Kit

SNARE DRUM
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

BassDrumTekPower
BassDrumHardLong
Bass Drum Blip
BassDrumAnalogSm

CYMBAL
•
•
•
•
•
•
•
•
•
•
•
•
•

Crash Cymbal 1
Crash Cymbal 2
Splash Cymbal 2
China Cymbal 2
Ride Cymbal 2
Ride Cymbal 3
RideCymbal Cup 2
Hi-HatClosedBrk1
Hi-HatClosedBrk2
Hi-HatClosedBrk3
HH HalfOpen Rock
HHClosedRockSoft
Hi-Hat PedalRock

SNARE DRUM 1
•
•
•
•
•
•
•
•
•
•

Snare Break 1
Snare Break 2
Snare Break 3
Snare Break 4
Snare Break 5
Snare Break 6
Snare Break 7
Snare Break 8
Snare Break 9
Snare Break Rim

SNARE DRUM 2
•
•
•
•
•
•
•
•
•

Snare Gate 1
Snare Clappy
Snare Hip
Snare Hip Rim 1
Snare Hip Rim 4
Snare LdwH Mono
Snare Lo-Fi
Snare Mid
Snare Rock Roll

ELS-02/ELS-02C Owner’s Manual

TOM
•
•
•
•
•
•

Tom Break 1
Tom Break 2
Tom Break 3
Tom Break 4
Tom Break 5
Tom Break 6

BASS DRUM
•
•
•
•
•
•
•
•
•

Kick Break 1
Kick Break 2
Kick Break 3
Kick Break 4
Kick Break 5
Kick Break 6
Kick Break 7
Kick Break Deep
Kick Break Heavy

PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Conga H Open
Conga H OpenSlap
Conga H Tip
Conga Open
Bongo H
Bongo L
Bongo 2 H
Bongo 2 L
Timbale H
Timbale L
Cowbell 1
Cowbell RX11
Claves
Maracas Slur

SFX Kit 2
SFX 1
•
•
•
•
•
•
•
•
•
•
•
•

SFX 2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•

Surdo Mute
Surdo Open
Cabasa
Agogo L
Scratch H
Scratch L
Scratch H 2
Scratch L 2
Scratch H 3
Scratch Down

PERCUSSION 3
•
•
•
•
•
•
•
•

Tambourine 1 Hit
Hi Q
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Whip Slap
Finger Snap

Phone Call
Telephone Ring
Wind Chime
Door Squeak
Door Slam
Scratch Cut
Scratch Split
Laugh
Scream
Punch
Heart Beat
Foot Steps

CarEngn Ignition
Car Tires Squeal
Car Passing
Car Crash
Siren
Train
Jet Plane
Starship
Burst
Roller Coaster
Submarine
Machine Gun
Laser Gun
Explosion
Firework

Live! SFX Kit 1
SFX
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Cutting Noise 1
Cutting Noise 2
String Slap
Flute Key Click
Shower 2
Thunder 2
Wind 2
Stream 2
Bubble 2
Feed
Ghost
Maou
Dog
Horse
Bird Tweet

Live! SFX Kit 2
SFX 1

SFX Kit 1
SFX
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Cutting Noise 1
Cutting Noise 2
String Slap
Flute Key Click
Shower
Thunder
Wind
Stream
Bubble
Feed
Ghost
Maou
Dog
Horse
Bird Tweet

•
•
•
•
•
•
•
•
•
•
•
•

Phone Call
Telephone Ring 2
Wind Chime
Door Squeak 2
Door Slam 2
Scratch Cut
Scratch Split
Laugh
Scream 2
Punch 2
Heart Beat
Foot Steps 2

SFX 2
•
•
•
•
•

CarEngn Ignition
Car Tires Squeal
Car Passing
Car Crash
Siren 2

Keyboard Percussion
•
•
•
•
•
•
•
•
•
•

Train 2
Jet Plane 2
Starship
Burst
Roller Coaster
Submarine
Machine Gun 2
Laser Gun
Explosion 2
Firework

Noise Kit
NOISE
White Noise
WhiteNoiseDown 1
WhiteNoiseDown 2
White Noise Up 1
White Noise Up 2
WhiteNoiseUp Rel
WhiteNoiseUp LFO
Pink Noise
PinkNoise Down 1
PinkNoise Down 2
Pink Noise Up
PinkNoise Up Rel
PinkNoise Up LFO

VocalEffectsKit
FEMALE 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Female Bh 1
Female Bh 2
Female Bh 3
Female Bh 4
Female Ha 1
Female Ha 2
Female Kh 1
Female Kh 2
Female Kh 3
Female Kh 4
Female Ph 1
Female Ph 2
Female Ph 3
Female Ph 4

FEMALE 2
•
•
•
•

Female Th 1
Female Th 2
Female Th 3
Female Th 4

MALE 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Male Bh 1
Male Bh 2
Male Bh 3
Male Bh 4
Male Ha 1
Male Ha 2
Male Ha 3
Male Ha 4
Male Ha 5
Male Ha 6
Male Kh 1
Male Kh 2
Male Kh 3
Male Kh 4

MALE 2
•
•
•
•
•
•

Male Ph 1
Male Ph 2
Male Ph 3
Male Ph 4
Male Th 1
Male Th 2

GospelAdLibs
GOSPELADLIBS 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Aaoh
Aha!
Heeey
Hoo!
Oh Yeah
Uhh Yeah
Yayayayayah
Yeah!
C'mon
C'mon Now
Come On!
Alright Now!
Everybody Now
Put Your Hands…
Stand Up On…
WithAllYourSoul

GOSPELADLIBS 2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

One
Two
Three
Four
One!
Two!
Three!
Four!
Five!
Six!
Seven!
Eight!
Clap!
ClapYourHands…
Gospel Clap 1
Gospel Clap 2

• Car Crash
• Helicopter
• Starship
ANIMAL
•
•
•
•
•
•
•
•
•
•
•
•
•
•

PERCUSSION 1
•
•
•
•
•
•
•
•
•

•
•
•
•
•

Laser Beam
Laser Shot
Water Phone
Bubble
Puddle

NATURE
•
•
•
•

Thunder
Shower
Beach
Stream

DAILY
•
•
•
•
•
•
•
•
•
•
•

Footstep
Door Squeak
Door Slam
Alarm Bell
Cuckoo Clock
Big Clock
Bell
Telephone
Camera
Gnaw
Applause

VEHICLE
•
•
•
•
•

Train
Horn 1
Horn 2
Siren
CarEngn Ignition

Cymbal
Snare
Snare Roll
Hi-Hat Open
Hi-Hat Closed
Tom 1
Tom 2
Bass Drum
Gran Cassa

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•

Wonderland Kit
SE

Sheep
Goat
Oxen
Whinny
Horse
Lion
Dog
Cat
Hen
Owl
Insects
Frog
Tweet 1
Tweet 2

Tambourine
Castanet
Jingle Bells
Bell Tree
Triangle Open
Triangle Mute
Wood Block H
Wood Block L
Finger Snap
Hand Clap

PERCUSSION 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Timbale H
Timbale L
Paila H
Paila L
Cowbell Top
Cowbell 1
Cowbell 2
Cowbell 3
Cowbell High 1
Cowbell High 2
Claves High
Claves Low
Guiro Long
Guiro Short
Metal Guiro Long
Metal Guiro Short

PERCUSSION 2
•
•
•
•
•
•
•
•
•
•
•
•
•

Maracas
Cuica Open
Cuica Mute
Cabasa
Shaker
Tambourine
Tambourim Tip
Tambourim Open
Tambourim Mute
Castanet
Triangle Open
Triangle Mute
Wind Chime

PERCUSSION 3
•
•
•
•
•
•
•

Hand Clap
Finger Snap
Shekere
Shekere Tone
Cajon Low
Cajon Slap
Cajon Tip

Arabic Kit

Pop Latin Kit
CONGA

ARABIC 1

•
•
•
•
•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•
•
•
•
•

Conga H Tip
Conga H Heel
Conga H Open
Conga H Mute
Conga H SlapOpen
Conga H Slap
Conga H SlapMute
Conga L Tip
Conga L Heel
Conga L Open
Conga L Mute
Conga L SlapOpen
Conga L Slap
Conga L Slide

BONGO
•
•
•
•
•
•
•
•
•
•
•
•

Bongo H Open 1 f
Bongo H Open 3 f
Bongo H Rim
Bongo H Tip
Bongo H Heel
Bongo H Slap
Bongo L Open 1 f
Bongo L Open 3 f
Bongo L Rim
Bongo L Tip
Bongo L Heel
Bongo L Slap

5
Rhythm/Keyboard Percussion

•
•
•
•
•
•
•
•
•
•
•
•
•

• Male Th 3
• Male Th 4

Nakarazan Dom
Nakarazan Edge
Hager Dom
Hager Edge
Zagrouda H
Zagrouda L
Arabic Hand Clap
Duhulla Dom
Duhulla Tak
Duhulla Sak
Doff Dom
Doff Tak

ARABIC 2
•
•
•
•
•
•
•
•
•
•
•
•

Katem Dom
Katem Tak
Katem Sak
Tabla Dom
Tabla Tak 1
Tabla Tak 2
Tabla Sak
Tabla Tik
Tabla Roll Edge
Tabla Flam
Tabel Dom
Tabel Tak

ARABIC 3
• Sagat 1
• Sagat 2
• Sagat 3

ELS-02/ELS-02C Owner’s Manual

Keyboard Percussion
•
•
•
•
•
•
•
•

Rik Dom
Rik Tak 1
Rik Tak 2
Rik Sak
Rik Tik
Rik Finger 1
Rik Finger 2
Rik BrassTremolo

CYMBAL/SNARE DRUM
•
•
•
•
•
•
•
•
•

Crash Cymbal 1
Crash Cymbal 2
Ride Cymbal 1
Hi-Hat Open
Hi-Hat Closed
Hi-Hat Pedal
Snare Drum
Snare Soft
Side Stick

TOM/BASS DRUM
•
•
•
•
•
•
•

Floor Tom L
Floor Tom H
Low Tom
Mid Tom L
Mid Tom H
High Tom
Kick Soft

PERCUSSION
•
•
•
•
•
•
•
•
•

Conga H Open
Conga L
Conga H Mute
Bongo H
Bongo L
Cowbell
Claves
Cabasa
Tambourine

Turkish Kit
CYMBAL
•
•
•
•

Zil Right Open
Zil Right Close
Zil Left Open
Zil Left Close

BONGO
•
•
•
•
•
•
•

Bongo Tek
Bongo Tek Roll
Bongo Tek Flam
Bongo Dum
Bongo Slap
Bongo Flam
Bongo Flam Hi

DAVUL
•
•
•
•
•
•
•
•

Asma Davul L
Asma Davul R
Asma Davul Side
Asma Davul Both
KoltukDavul Teke
Koltuk Davul Tek
Koltuk Davul Dum
KoltukDavul Flam

DARABUKA 1
•
•
•
•
•
•
•
•
•

Darbuka Tek 1
Darbuka Tek 2
Darbuka Tek Dead
DarbukaTekDamped
DarbukaTekeFin 1
DarbukaTekeFin 2
DarbukaTekeFin 3
DarbukaTekeFin 4
Darbuka Teke

•
•
•
•
•
•
•

DarbukaTekeFlamD
Darbuka TekeFlam
Darbuka Slap
Darbuka Slap Med
Darbuka RollOpen
DarbukaRollClose
Darbuka Dum

DARABUKA 2
•
•
•
•
•
•
•
•
•

Bass Darbuka Tek
BDarbuka TekDead
BDarbuka TekFlam
BassDarbuka Teke
BDarbukaTekeFin1
BDarbukaTekeFin2
BassDarbukaSlap1
BassDarbukaSlap2
Bass Darbuka Dum

BENDIR
•
•
•
•
•
•
•

Bendir Tek
Bendir Tek Dead
Bendir Teke
Bendir Teke Flam
Bendir Teke Dead
Bendir Slap
Bendir Dum

•
•
•
•
•
•
•
•
•

Da Gu Roll
Da Gu Hand
Pai Gu 1
Pai Gu 2 High
Pai Gu 2
Pai Gu 3 High
Pai Gu 3
Pai Gu 4 High
Pai Gu 4

GONG 1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Yunluo F
Yunluo F#
Yunluo G
Yunluo G#
Yunluo A
Yunluo A#
Yunluo B
Yunluo C
Yunluo C#
Yunluo D
Yunluo D#
Yunluo E
Yunluo High F
Yunluo High F#
Yunluo High G
Yunluo High G#

TEF

GONG 2

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

•
•
•
•

Tef Tek Flam
Tef Tek Open
Tef Tek Mute
TefTekMuteMedium
Tef Tek Op Short
Tef Teke Flam
Tef Teke Damped
Tef Teke OpShort
Tef Dum Open
Tef Dum Mute
Tef Cymbal
Tef Cymbal Mute
Tef Shake 1
Tef Shake 2
Tef Full Open
Tef Tremolo

PERCUSSION
•
•
•
•
•

Hollo FingerDead
Hollo Slap
Hollo Dum
Kasik
Kasik Flam

Yunluo High A
Yunluo High A#
Yunluo High B
Yunluo High C

CYMBAL
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Da Cha 1
Da Cha 2
Da Cha Effect
Zhongcha
Xiaocha
Xiaocha Effect
Gong Batter
Luo Big
Luo
Luo Mid-Low
Luo High 1
Luo High 2
Jin Luo
Jin Luo Low
Mang Luo Low
Mang Luo Mid

DRUM
• Da Gu f
• Da Gu mp
• Da Gu Rim

ELS-02/ELS-02C Owner’s Manual

Concert Tom 5
Rotating Tom 1
Rotating Tom 2
Rotating Tom 3
Rotating Tom 4
Rotating Tom 5

BASS DRUM
•
•
•
•

Gran Cassa Hard
Gran Cassa Soft
Gran Cassa Hit
Gran Cassa Cresc

GONG
•
•
•
•

Gong
Symphonic Gong 1
Symphonic Gong 2
Symphonic Gong L

TIMPANI
•
•
•
•
•
•
•
•
•
•
•
•
•

Timpani E
Timpani F
Timpani F#
Timpani G
Timpani G#
Timpani A
Timpani A#
Timpani B
Timpani C
Timpani C#
Timpani D
Timpani D#
Timpani High E

PERCUSSION

PERCUSSION 1

•
•
•
•
•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Muyu Low
Muyu Mid-Low
Muyu Mid
Muyu High
Ban
Bangu
Bangu Roll
Nanbangzi
Nanbangzi Roll
Qing
Finger Bell
ChineseOperaVo 1
ChineseOperaVo 2
ChineseOperaVo 3

OrchestraPerc
CYMBAL

China Kit

•
•
•
•
•
•

•
•
•
•
•
•
•
•
•
•
•
•

China Cymbal
Finger Cymbal
Orch Cymbal 1
OrchCymbal 1 ckd
Orch Cymbal 2
Ride Cymbal Tip
Ride Cymbal Cup
Splash Cymbal
Sus Cymbal 1
Sus Cym 1 Roll S
Sus Cymbal 2
Sus Cym 2 Roll L

SNARE DRUM
•
•
•
•

ConcertSnareDrum
Snare Drum Light
Snare Ensemble
Snare Roll

TOM
•
•
•
•

Concert Tom 1
Concert Tom 2
Concert Tom 3
Concert Tom 4

Conga H Stick
Conga L Stick
Bongo H Stick
Bongo L Stick
Cowbell
Claves
Bell Tree
Sleigh Bells
Tubular Bell H
Tubular Bell M
Tubular Bell L
Wind Chime
Jingle Ring
Tambourine
Castanet Roll
Table Castanet

PERCUSSION 2
•
•
•
•
•
•
•
•
•

Triangle Open
Triangle Mute
Triangle Roll
Wood Block H
Wood Block L
Temple Block H
Temple Block L
Anveil
Whip

6 Registration Memory
Registration Memory allows you to store virtually all the settings you make on the panel and LCD, providing a
convenient way to instantly change all Voice settings and rhythms while you’re playing, with the simple touch
of a single button on the Registration Memory panel. The buttons are conveniently located between the Upper
and Lower keyboards for easy access while playing. Moreover, you can also recall the settings using the right
footswitch. All Registrations in Registration Memory can also be saved to a USB flash drive.
13

Storing Registrations

Functions and settings that cannot
be memorized:

Newly created Registrations you make can be stored to
the Registration Memory panel buttons. All Registrations
in Registration Memory can also be saved to a USB flash
drive for future recall.

The following settings cannot be stored to a
Registration Memory number.

Reference pages
• Selecting a Voice (page 25)
• Selecting a Rhythm (page 56)
• Voice Controls and Effects (page 42)

1
2

Create your original Registration.
While holding down the [M.] (Memory)
button in the Registration Memory
section, press the numbered button to
which you wish to save your Registration.

1. While holding down the [M.] button...
2. Press desired numbered button.

When saving of the Registration is started, the
numbered button flashes momentarily, until the
operation is completed.
NOTICE
When recording Registration settings, the square at the
top left of the display turns light blue for a few seconds,
indicating that the Registration is currently being saved.
Do not turn the power off while the Registration is being
saved, otherwise the data will be lost.

•
•
•
•
•
•
•

6
Registration Memory

Registration Memory and Bank
The ELS-02 series lets you create up to five Registration Banks A – E, each of which consists of 1 – 16
Registration Memories. Although preset various Registrations are stored to the Number buttons 1 – 16 of only
Bank A by default, you can replace them with your original Registrations. Your original Registrations can be
stored also to Banks B – E, up to a maximum of 80 Registrations. Executing the Initialize function (page 98)
recalls the preset Registrations of Bank A, and then resets the created Registrations of Banks B – E to their
original empty status.

Pitch (page 184)
MIDI Control settings (page 192)
Mic. Volume (page 189)
Mic. Reverb (page 189)
LCD related settings (page 16)
Wireless LAN settings (page 193)
Score related settings except Next Page (page 125)

The following settings common to all Registration
Memory numbers 1 – 16 and cannot be stored
individually for each number.
Reference page
• Saving Registrations and Other Data to a USB Flash Drive
(page 118)

•
•
•
•
•
•
•
•
•
•
•
•

Transpose (page 184)
Attack mode in Organ Flute Voices (page 40)
Registration Shift (page 99)
Auto Fill setting (page 58)
Reverb type (page 47)
User Voices (page 144)
User rhythms (page 161)
User Keyboard Percussion (page 81)
Rhythm Sequences (page 172)
Disable setting (page 96)
Disable mode (page 97)
Next Page setting of score setting (page 125)

ELS-02/ELS-02C Owner’s Manual

Storing Registrations to Another Bank

Storing Registrations to
Another Bank
With the default initial settings and Bank A selected, you
can store your original Registrations to Banks A and B.
Storing the Registrations to Bank B enables selection of
Bank C. Similarly, storing Registrations to Bank C enables
selection of Bank D, and so on, up to a maximum of Bank
E.

At the lower right section of the Voice
Display, select the Registration Bank.

NOTE
When you try to store Registrations after changing the Bank, a
confirmation dialog appears. Confirm whether or not you want to
set the current Bank as the destination.

Selecting Registrations
Select a Bank, then press the numbered button that
corresponds to the Registration you wish to select.
• You can also recall Registrations by using the right
footswitch. This function is called “Registration Shift”
(page 99).
You can select the Banks from A (at top) to an empty
Bank next to the last Bank containing data. When
Banks A and B contain Registration data, for
example, you can select Banks A, B, and C (which is
empty). The on/off indication of Bank (A – E) shows
whether the selected Bank contains data or not.

• You can also program the Registrations to change
automatically at specific points within the Rhythm
Sequence. This function is called “Registration
Sequence” (page 174).

Using the [D.] (Disable) button:
Rhythm and automatic accompaniment patterns also
change when you select different Registration
Memory buttons. Pressing the [D.] (Disable) button
allows you to keep the same rhythm, accompaniment
patterns, tempo, and so on throughout all your
Registration changes, or make your own rhythm
selections if you want to (while the [D.] button is lit).
Disable button

Create your original Registration, then
store it to any of the Number buttons 1 –
16. (This corresponds to steps 1 – 2 on
page 95.)
Here, the Registration will be stored to Number
button [1] of Bank B.

The particular settings that do not change when the
[D.] (Disable) button is on depend on the Disable
mode setting. For details on the Disable mode, see
“Selecting Disable Mode” below.
NOTE
The Disable function is available even after changing the
Bank.

ELS-02/ELS-02C Owner’s Manual

Saving the Registration Data to USB Flash Drive

Selecting Disable mode:
The Disable mode enables you to select what is to be
disabled when the [D.] (Disable) button is on. There
are two Disable modes: Normal (rhythm menu,
tempo, etc. are disabled) and Tempo (only tempo is
disabled).

1
2

Press the [UTILITY] button to call up
the GLOBAL Page of the Utility
display.
Press the DISABLE MODE
[NORMAL] or [TEMPO] button.

Saving the Registration
Data to USB Flash Drive
The Registration data stored to the Number buttons can
be saved to a USB flash drive connected to the [USB TO
DEVICE] terminal.
Reference page
• Saving Registrations and Other Data to a Unit (page 118)

With the MDR function, up to five Banks of the
Registration Memory stored to internal memory of the
instrument can be saved to a USB flash drive as a single
Song file. Although detailed information about the MDR
is described on chapter 7, these instructions show how to
save the Registration data to a USB flash drive.

Insert a USB flash drive into the [USB
TO DEVICE] terminal.
Press the [MDR] button on the panel to
call up the MDR display.

Registration Memory

DISPLAY SELECT

Disable mode

NORMAL
When the Electone is set to the Normal mode and the
[D.] (Disable) button is on, the following functions
will not change, even when you change the
Registration Memory number.

VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

• Rhythm menu, Rhythm section, Rhythm tempo,
Rhythm volume, Rhythm reverb

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

• Rhythm reverb time
• Accompaniment volume, Accompaniment reverb,
On/Off status of Accompaniment parts
• A.B.C. mode, A.B.C. memory
• M.O.C. mode, Knee lever control for M.O.C.
• Second expression pedal control for rhythm tempo

TEMPO
When the Electone is set to the Tempo mode and the
[D.] (Disable) button is on, the rhythm tempo will
not change, even when you change the Registration
Memory number.

Select the Song to which you want to
save the Registration data (page 112).

ELS-02/ELS-02C Owner’s Manual

Initializing Registration Memory

4
5

Press the [UNIT EDIT] button on the
lower right side of the display to call up
the Unit Edit display.

Initializing Registration
Memory

Press the [SAVE] button in the display.

Deleting all Registration data in Registration Memory
initializes the Registration Memory. Be careful when
using this operation, since it erases all your existing data.
In order to avoid inadvertently losing your important
data, save it to a USB flash drive.

A message appears, indicating the Registration data
is currently being saved.
When the operation is completed, the message
closes.

Reference page

Reference pages
• Recalling Recorded Registrations (page 120)
• Changing the Song Name (page 116)

The Registration data stored to Banks A – E is now saved
as a Unit to the USB flash drive.

• Factory Set (Initializing the Electone); (page 23)

Press the [UTILITY] button on the panel
to call up the GLOBAL Page in the
Utility display.
DISPLAY SELECT

About Banks and Units
The Registration Memory data (16 x up to 5 Banks)
stored to internal memory of the instrument will be
handled as “Unit.” If you want to create more than 80
(=16 x 5 Banks) Registrations, create another Unit to
create more additional Registrations. The Unit can be
edited in the MDR function. See page 119.

VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

Song

Unit 3
Unit 2
Unit 1
Bank E
Bank D
Bank C
Bank B
Registration Memory

Bank A

Press the INITIALIZE [EXECUTE] button
on the right side in the display.
The message “Are you sure you want to initialize
Registration data?” appears.
Press [INITIALIZE] to actually initialize the data.
When the operation is complete, the Electone will be
restarted.
Press [CANCEL] to cancel the operation.

ELS-02/ELS-02C Owner’s Manual

Registration Shift

1 OFF

Registration Shift
The Registration Shift function allows you to change
Registrations without taking your hands from the
keyboards. By using the Right Footswitch on the
expression pedal, you can “jump” to a specified
Registration or step through the panel Registrations in
sequence, either in numeric order or in any order you
specify.
Registration Shift has three modes: Shift, Jump and User.
These are set in the Regist Shift display. You can also view
and check the Registration Shift mode in the Voice
Display.

Turns off the Registration Shift assignment. When you
select OFF, you cannot change Registrations by using the
Right Footswitch.

2 SHIFT
In the Shift mode, each press of the Right Footswitch
selects the Registration Memory presets in their
numerical order. After the last Registration is reached, the
function ‘wraps around’ to select the first preset again.
The numbered buttons light up as they are selected.
NOTE
In the Shift mode, the Right Footswitch cannot call up another
Registration Bank.

3 JUMP

1
2

Pressing the Right Footswitch jumps to select the
designated panel Registration.
You can set the Jump “destination” with
buttons in the display or the Data Control dial.

Press the [FOOT SWITCH] button on the
panel.

6
Registration Memory

Setting the Registration Shift
mode in the Regist Shift display

Press the [RIGHT] button at the top right
of the display to call up the RIGHT Page
(REGIST SHIFT display).
DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

Registration number of the destination
FOOT
SWITCH

UTILITY

AUDIO

4 USER
RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

In the User mode, each press of the Right Footswitch
selects Registrations according to the order you’ve
specified.

L.ORGAN ROTARY SP
SPEED
FLUTES

REGIST SHIFT display

ELS-02/ELS-02C Owner’s Manual

Registration Shift

To set the User Registration order:

1
2
3

Select a Bank.
Press the desired numbered button in
the Registration Memory section.
Press the DATA [SET] button in the
display.
The Bank letter and Registration number appear in
the display, indicating that the Registration is
entered.

DELETE: For deleting a Registration number at the
current cursor position. To delete the unnecessary
number, move the cursor to a numbered position and
press [DELETE] in the display.

Repeat steps 2 and 3 above to set the
Registration order.
Registration row

4
1

INSERT: For inserting a Registration number just before
the current cursor position.
To perform the operation, first move the cursor to a
numbered position. Then, press the desired Registration
Memory button (the selected button will light), and press
[INSERT] in the display. The new Registration number is
inserted at the cursor position and all other numbers to
the right of the cursor are moved to accommodate the
new numbers.
Registration numbers cannot be entered beyond the
Registration Shift function’s capacity of 400. If the insert
operation exceeds this capacity, a “Data Full” message
appears and the operation cannot be executed.

CLEAR: For erasing all current user Registration Shift
settings. After selecting [CLEAR], a message appears
prompting confirmation of the operation.
Select [CLEAR] to clear all data. The message “Clear all
data” momentarily appears in the display and returns to
the previous display.
Select [CANCEL] to abort the operation.

3 SHIFT END
Determines how to end the Registration Shift function.

1 POSITION
These are cursor controls used to move the cursor
(colored orange) along the Registration row in the
display. Entered Registration numbers are shown in
boxes, while the numbers in the row above indicate the
position in the sequence (in other words, the number of
successive presses of the Right Footswitch). Up to 400
steps (Registrations) can be memorized.
Moves the cursor to the first position.
Moves the cursor one step to the left.

TOP: After the last preset is reached, the first preset is
called up again, starting the sequence over again from the
beginning.
NEXT UNIT: After the last preset is reached, the next
Unit in the Song is called up. This function is available
only when two or more Unit sets are saved to one Song.
Reference page

Moves the cursor one step to the right.

• Saving Two or More Registration Units in a Song (page 118)

Moves the cursor five steps to the right.

NOTE

2 DATA
These are data controls used to enter and delete
Registration numbers in the Registration row.
SET: For initially entering a Registration number to a
blank space in the Registration row, or for replacing a
number at the current cursor position.
To enter a number, press the desired Registration
Memory button (the selected button will light), then
press [SET] in the display. The entered Registration
number will appear in the Registration row. After using
SET to enter Registrations, the cursor can be moved
among the numbers.

100

STOP: Selects the last Registration and quits the
operation.

ELS-02/ELS-02C Owner’s Manual

• When you play the Song using Next Unit function, always press
the [R] (Play) button in the MDR display to start the Song and
activate these functions. The [CUSTOM] (Custom Play) button
(page 107) will not activate the Next Unit function.
• When you use the Next Unit function during Rhythm playback,
Rhythm Sequence and User Rhythm cannot be loaded.

The Shift End mark ( or
) will automatically be put
at the end of the Registrations you entered when Top or
Next Unit is selected as the Shift End.

4 BANK SELECT
Selects the Bank which contains the desired Registration.

Registration Shift

Registration Shift, in “SHIFT” mode:

Confirming the Registration Shift
setting in the Voice Display
You can confirm the Registration Shift mode in the Voice
Display, Page 1.
Press the [VOICE DISPLAY] button on the panel to call
up the Voice Display.
DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

Current Registration

Next Registration

The current Registration number (left) and the next
number (right) are displayed.

Registration Shift, in “JUMP” mode:

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

L.ORGAN ROTARY SP
SPEED
FLUTES

Destination number can be changed.

The current Registration number (left) and the
destination number (right) will be displayed. You can
change the destination number even in the middle of the
performance by using the
buttons in the
display or the Data Control dial.

Registration Memory

U.ORGAN
FLUTES

Registration Shift, in “USER” mode:

The Registration Shift mode is shown at the bottom right
of the display.

Registration Shift, OFF:

The current Registration number is displayed.

Indicates the current position of the Registration Shift.
You can change the Registration by moving the cursor (in
orange) right/left, using the displayed buttons or the Data
Control dial. This is handy if you’ve inadvertently
advanced the shift setting in the middle of your
performance. The user Registration settings cannot be
edited here.
Moves the cursor to the first position.
Moves the cursor one step to the left and selects
the next Registration.
Moves the cursor one step to the right and selects
the previous Registration.
Moves the cursor five steps to the right and
selects the Registration.

ELS-02/ELS-02C Owner’s Manual

101

Unifying Values/Settings of a Specific Parameter

Unifying Values/Settings
of a Specific Parameter
In the Voice Display, Page 2, you can conveniently unify
the values or settings of a specific parameter used in the
current Registration Bank at one time. This is useful
when you are changing, for example, the Voice Brilliance
setting for the Upper Keyboard and want the same setting
to be applied to all Registrations in the Bank.

Select the Bank, then press the
PARAMETER button (indicates the
currently selected parameter) in the
display to select the desired parameter
for changing.
The Parameter Select pop-up menu appears, letting
you select the desired parameter.

Available parameters
• Reverb
• Rhythm Reverb
• Volume
• Panning
• Brilliance

Parameter

• Sustain

1
2

Press the [VOICE DISPLAY] button on
the panel.
Press the [2] button at the top right of
the display to select Page 2.
DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

Part

Select the parameter and part in the
Parameter Select pop-up menu.
After selecting the desired parameter, the pop-up
menu automatically closes.
The amount of the selected parameter for each
Registration is shown in the display.
Parameter value for each Registration

Selected parameter

NOTE
A parameter can be unified only within the current Bank.

102

ELS-02/ELS-02C Owner’s Manual

Unifying Values/Settings of a Specific Parameter

Select the targeted Registration
numbers and turn them on.
Parameters in Registrations set to ON will be changed.

Unifying the currently highlighted
parameter’s value:
Pressing [SET] unifies the currently highlighted
parameter’s values to the one in the currently selected
Registration (at the cursor position). A message appears
prompting you to confirm the operation.

Press the targeted Registration in the display and
turn it on with the SETTINGS buttons: ALL ON,
ALL OFF, ON, OFF, and SELECT.

6
ALL OFF: Cancels all Registration memory
numbers.
ON: Sets the currently selected Registration
memory number to “ON.”
OFF: Sets the currently selected Registration
memory number to “OFF.”
SELECT: Turns on the Registration memory
numbers that contain the same Voice as the one
which is currently set in the Registration at the
cursor position.
The targeted Registration numbers are underlined.

Offsetting the currently highlighted
parameter’s value:
Pressing the [+]/[-] buttons in the display or using the
Data Control dial offsets the currently highlighted
parameter’s value. If you select Pan as the parameter, the
[L][R] buttons are shown instead of [+]/[-].

Registration Memory

ALL ON: Selects all Registration memory numbers.

To continue the operation, select [UNIFY]. Select
[CANCEL] to abort the operation.

If you change the value, and if parameter values for some
Registration memory number reach the maximum or
minimum, the following message appears.

Unifies the currently turned-on
parameter’s values.
You unify the relevant parameter values in each
Registration memory number or offset them. Keep
in mind that you cannot restore the original data
once you change the parameter’s value.

In this case, pressing [OK] continues the operation,
ignoring those parameters at maximum or minimum
value. Pressing [CANCEL] aborts the operation.

ELS-02/ELS-02C Owner’s Manual

103

Copying Registrations

Copying Registrations
In the Voice Display, Page 3, you can copy a Registration
stored to a specific Registration Memory number to
another number on a specific section basis (Voices,
rhythm, keyboard percussion). (The function is called
Regist Section Copy.) This is useful, for example, when
you want the upper keyboard Voice in Registration
number 4 to be the same as in Registration number 1.

1
2

Press the [VOICE DISPLAY] button on
the panel to call up the Voice Display.
Press the [3] button at the top right of
the display to call up Page 3.
DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

Registration number
RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

Press the Voice Section button at the
lower right of “COPY FROM” to select
the Voice Section as source.
To abort the operation press the [CLOSE] button.

Press the Registration number button at
the lower left of “COPY FROM.”
To abort the operation press the [CLOSE] button.

Section

104

ELS-02/ELS-02C Owner’s Manual

Copying Registrations

In the same way, select the COPY TO
Registration number and Regist
Section.
The COPY TO Regist Section depends on the Regist
Section selected for COPY FROM.
NOTE
If you change the source Regist Section after changing the
destination Regist Section the destination may
automatically change to the section selected as the source
Regist Section.

Press the [EXECUTE] button in the
SECTION COPY area in the display.

To copy a Bank:
You can also copy Registration data by Bank. To do this,
select the source Bank in the COPY FROM area, select
the destination Bank in the COPY TO area, then press
the [EXECUTE] button at the right bottom in the display.

To delete the current Bank:
Press the [DELETE] button in the display.
NOTE
Data of Banks that follow the deleted Bank will be moved up to
the previous Bank respectively. For example, deleting the Bank
A will move the data of Bank B to Bank A, Bank C to Bank B,
Bank D to Bank C, and Bank E to Bank D.

The following display appears, prompting
confirmation of the operation.

6
Registration Memory

Press the [COPY] button in the display
to copy the Registration and a message
momentarily appears in the display
indicating that the Registration has
been copied.
Select [CANCEL] to abort the operation.

ELS-02/ELS-02C Owner’s Manual

105

7 Music Data Recorder (MDR)
The Music Data Recorder (MDR) is a sophisticated recording system built into the Electone that lets you
record your performances and Registration settings to a USB flash drive. Before using a USB flash drive,
carefully read “Precautions when using the [USB TO DEVICE] terminal” section on page 110.

Calling Up the MDR Display

Using the MDR Display

Press the [MDR] button in the panel to call up the MDR
display. All operations related to the MDR, such as
recording and playing your performances, can be done in
the MDR display.

The MDR display consists of two display pages: the
SONG Page and the TOOLS Page. In the SONG Page,
you can select a Song, then play it back or record it. The
TOOLS Page has a variety of Song utility operations, such
as copy, delete, rename, etc.
Pressing the [SONG] or [TOOLS] button at the top right
of the display switches between the SONG Page and the
TOOLS Page.

DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

SONG Page
1

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

3 5

L.ORGAN ROTARY SP
SPEED
FLUTES

)

TOOLS Page

NOTE
The USB flash drives (USB 01, USB 02...) are shown in random
order in the display.

Pressing any button other than the [MDR] button while
the MDR display is open exits from the MDR display. If
you exit from the function inadvertently, simply press the
[MDR] button again to recall the MDR display.
All the instructions in this chapter are related to the MDR
display. To call up the MDR functions and the MDR
display, press the [MDR] button.

106

ELS-02/ELS-02C Owner’s Manual

Using the MDR Display

1 Current USB Flash Drive/Folder

) CUSTOM PLAY

Displays the currently selected USB flash drive and
folder(s). The left side of the indication (before “:/”)
shows the particular USB flash drive and the right side
shows the path with the currently selected folder name at
the end. For example, “USB 01:/Folder1/” indicates that
the folder named “Folder1” contained in the USB flash
drive is selected.

Records/plays back only the performance data of the
selected Songs. Using this button does not recall the
Registration data.

! SCORE
Displays the selected Song’s score.
Reference page
• Displaying the Score (page 124)

2 USB Flash Drive/Folder/Song List
Displays the USB flash drive, folders or Songs. Up to 120
folders can be displayed (5 folders at once).

3 Scroll buttons
If the USB flash drive/folder/Song list contains more than
5 USB flash drives/folders/Songs, you can scroll through
the display with these buttons.

@ UNIT EDIT
Displays the Unit Edit display for the selected Song’s
Registration data.
Reference pages
• Saving Registrations and Other Data to a Unit (page 118)
• Recalling Recorded Registrations (page 120)

# CREATE FOLDER
4 SETTINGS
Displays/changes the settings for the currently selected
Song.

5 UP
Selects the higher layer folder or USB flash drive. For
example, when “USB 01:/Folder1/” (Folder1 in the USB
flash drive) is selected, pressing the [UP] button selects
“USB 01:/” (USB flash drive).

$ CHANGE NAME
Changes the folder/Song name.
Reference page
• Changing the Song Name (page 116)

7
Music Data Recorder (MDR)

Reference page
• About the [SETTINGS] button (page 112)

Creates a new folder in the USB flash drive/folder/Song
list. Up to 120 folders can exist in one USB flash drive or
within a single upper folder. Pressing this button calls up
the New Folder display in which you can enter the
desired name. Enter the name and press the [OK] button
to create a new folder. The method for entering a folder
name is the same as that of the Song name. See page 116.

6 IN
Selects the next lower (or deeper) layer folder or USB
flash drive. For example, when “USB 01:/ Folder1/”
(Folder1 in the USB flash drive) is selected, pressing the
[IN] button selects “USB 01:/Folder1/SONG/” (the
SONG folder contained in Folder1 of the USB flash
drive).

% COPY

NOTE

Deletes the selected folder/Song.

You can execute the same operation also by pressing the
currently selected folder.

7 SEARCH
Search for the folder/Song in the selected USB flash drive.
Reference page
• Searching for a Song (page 112)

8 Elapsed time
Displays the elapsed time when recording/playing back a
Song (up to 99 min. 59 sec.).

Copies the selected USB flash drive/folder/Song.
Reference page
• Song copy (page 126)

^ DELETE
Reference page
• Song delete (page 128)

& CONVERT
Converts the selected Song for use on another Electone or
other instruments, or converts Songs recorded on
another Electone for use on the ELS-02/ELS-02C. Songs
can be converted to XG format, EL format or ELS format.
Reference pages
• Converting to XG (page 129)
• Converting ELS format to EL (page 130)
• Converting EL format to ELS (page 131)

9 Song control
Controls Song recording, playback, etc.
Reference pages
• Recording your performance (page 114)
• Playing Back a Song (page 121)

ELS-02/ELS-02C Owner’s Manual

107

Using the MDR Display

* INFORMATION
Displays available memory when USB flash drive is
selected and displays information such as the title and
composer when a Song is selected. The information to be
displayed depends on the Songs.

Song icons
These icons are shown when you select a USB flash drive,
folder, and Song.

Reference pages
• Checking the remaining memory (page 131)
• About Protected Songs (page 121)

Indicates a USB flash drive. This icon is displayed
in the USB flash drive/folder list.
Indicates a folder.

If USB flash drive cannot be found:

Press the
(UP) button until the
button is grayed out.
The USB flash drive list will be displayed. If there are
more than five media selections, scroll through the
display with the Scroll buttons (page 107) to display
the desired USB flash drive.

Indicates that write-protect or copy-protect is
effective for the USB flash drive.
Indicates that performance data is contained in
the Song.
Indicates an XG-compatible Song.
Indicates a Protected Original Song. See page 121
for details.

If Songs cannot be found:

1
2

Check the current USB flash drive/folder
(page 107).
If the desired Song is stored in the
currently displayed folder, use the Scroll
buttons (page 107) to display the Song.
If the desired Song is stored in a
different folder, use the
(UP) and
(IN) buttons to select the folder
in which the desired Song is stored.
If you are not sure of the folder in which the desired
Song is stored, search a Song by using SEARCH
function (page 112).

NOTE
If the message “Registration data will be initialized” is displayed
when you select a folder, press the [INITIALIZE] button. (The
USB flash drive is not initialized.) The message will appear when
recalling a Protected Song.

108

ELS-02/ELS-02C Owner’s Manual

Indicates a Protected Edit Song. See page 121 for
details.

Using the MDR Display

USB flash drive contents: Folders, Songs, and Files
Folders:
A folder is a storage location in the USB flash drive, used to organize multiple Songs in groups. If you’ve saved many
Songs to a USB flash drive, it may be difficult to find the desired Song quickly. Organizing your Songs in folders, with
similar Songs grouped together (for example, according to genre or tempo), makes it easier to find the Songs you
want.
Song
1

Song
2

Song
3

Song
4

Song
5

Song
6

Song 1

Folder A

Song 4

Creating
folders
Song

Song

USB flash drive

2 3

5 6

Folder B

USB flash drive

Songs:

Files:
A file is an element of data in a Song. For example, a single Song consists of various files, such as Registration files
and performance files. The following files are created with the MDR (The extension will not appear in the Electone
display. They will, however, be displayed on a computer.)
Files in the Song
File

Explanation

Music Data Recorder (MDR)

A Song is the Electone data for a piece of music, recorded to USB flash drive. A single Song can contain a variety of
data, including the recorded performance, Registrations, and so on.

Extension

Performance data

This file contains performance data, played on the keyboards and pedals of the Electone.

.mid

Registration data

This file contains Registration settings, User Voices, User rhythms, and Rhythm Sequences.

.b00

XG-converted data

This file contains XG Song data, for which Electone performance data is converted to XGcompatible format.

.mid

In addition, one file (extension: .nam) is automatically created in each folder for organization/maintenance of the
folder contents. It does not appear on the Electone display.

ELS-02/ELS-02C Owner’s Manual

109

Using the MDR Display
NOTICE

Precautions when using the
[USB TO DEVICE] terminal
This instrument is equipped with the three [USB TO
DEVICE] terminals as follows:

• Avoid connecting or disconnecting the USB flash drive
while executing playback/recording and file management
operations (such as Save, Copy, Delete and Format), or
when accessing the USB flash drive. Failure to observe
this may result in “freezing” of the operation of the
instrument or corruption of the USB flash drive and the
data.

• Two [USB TO DEVICE] terminals in the USB Dock at
the left front of the keyboard.

• When connecting then disconnecting the USB flash drive
(and vice versa), make sure to wait more than 6 seconds
between the two operations.

• One [USB TO DEVICE] terminal at the right side
under the keyboard.

NOTE

However, an ELS-01 series instrument with an installed
STAGEA Vitalize unit is equipped as follows.

• An ELS-01 series instrument with an installed STAGEA Vitalize unit
does not have a USB Dock installed. For details about the USB
Dock, see page 186.

• Two [USB TO DEVICE] terminals at the right side
under the keyboard.

• When you use a USB device other than a USB flash drive,
connect it to the [USB TO DEVICE] terminal on the right side
under the lower keyboard.

NOTE

• When connecting a USB cable, make sure that the length is less
than 3 meters.

For more information about the handling of USB devices, refer to
the owner’s manual of the USB device.

Compatible USB devices
• USB flash drive
• USB wireless adaptor (which is included only in some
areas)
Other USB devices such as a computer keyboard or
mouse cannot be used.
Although USB devices 1.1 to 3.0 can be used on this
instrument, the amount of time for saving to or loading
from the USB device may differ depending on the type of
data or the status of the instrument.
The instrument does not necessarily support all
commercially available USB devices. Yamaha cannot
guarantee operation of USB devices that you purchase.
Before purchasing a USB device for use with this
instrument, please visit the following web page:
http://download.yamaha.com/
NOTE

By connecting the instrument to a USB flash drive, you
can save data you’ve created to the connected device, as
well as read data from the connected device.

Maximum number of USB flash drives
allowed
Up to three USB flash drives can be connected to the
[USB TO DEVICE] terminal.

Formatting USB flash drive
You should format the USB flash drive only with this
instrument (page 111). A USB flash drive formatted on
another device may not operate properly.
NOTICE

• The rating of the [USB TO DEVICE] terminal is a maximum of 5V/
500mA. Do not connect USB devices having a rating above this,
since this can cause damage to the instrument itself.

The format operation overwrites any previously existing
data. Make sure that the USB flash drive you are formatting
does not contain important data. Proceed with caution,
especially when connecting multiple USB flash drive.

• Only an ELS-01 series instrument with an installed STAGEA
Vitalize unit can be used with one USB hub.

To protect your data (write-protect)

Connecting USB device
When connecting a USB device to the [USB TO
DEVICE] terminal, make sure that the connector on the
device is appropriate and that it is connected in the
proper direction.

USB Dock

110

Using USB flash drives

ELS-02/ELS-02C Owner’s Manual

To prevent important data from being inadvertently
erased, apply the write-protect provided with each USB
flash drive. If you are saving data to the USB flash drive,
make sure to disable write-protect.

Turning off the instrument
When turning off the instrument, make sure that the
instrument is NOT accessing the USB flash drive by
playback/recording or file management (such as during
Save, Copy, Delete and Format operations). Failure to do
so may corrupt the device and the data.

Formatting a USB Flash Drive

Formatting a USB Flash
Drive
If you find that you are unable to use a new, blank USB
flash drive or an old one that has been used with other
devices, you may need to format it.
Formatting erases all the data in the USB flash drive and
makes it ready to record. The data erased by formatting
will be lost permanently. Check whether or not the USB
flash drive contains any important data you wish to keep
before executing the operation. Proceed with caution,
especially when connecting multiple USB storage media.

Press the [FORMAT] button in the
display.
A message appears, prompting confirmation of the
operation. Select [FORMAT] to format the USB
flash drive, or [CANCEL] to abort the operation.
NOTICE
Do not remove the USB flash drive while formatting.

NOTE
Before purchasing a USB flash drive, please consult your
Yamaha dealer, or an authorized Yamaha distributor for advice,
or see the Yamaha website:
http://download.yamaha.com/

3
4

Music Data Recorder (MDR)

Connect the USB flash drive to the [USB
TO DEVICE] terminal.
Press the [TOOLS] button at the top
right of the display to call up the TOOLS
Page.
Press the
(UP) button repeatedly
if necessary until the button is grayed
out.
Select the desired USB flash drive you
want to format.

The indications USB 01, USB 02, etc. will be
displayed depending on the number of the
connected USB flash drives.

ELS-02/ELS-02C Owner’s Manual

111

Selecting a Song

Selecting a Song
In the MDR display, you can select a blank Song to which
you want to record your performance or save the
Registration settings, or you can select a desired Song for
playback.
In the MDR display, Songs in the currently selected USB
flash drives are displayed.
First call up the desired USB flash drive (and folder, if
necessary) in the display, then select the desired Song.

About the [SETTINGS] button
Pressing the
(SETTINGS) button calls up a
display of the currently selected Song, letting you confirm
the tempo and parts that are played when playing the Song.

Check the currently selected USB flash
drive at the top of the display.
Confirm that the desired USB flash drive is
displayed at the top of the display.
Currently selected USB flash drive/folder

When playing back the Song (by pressing the [R] (Play)
button), only those parts that are set to “PLAY” in the
display actually play at the indicated tempo (over a range of
50% to 200% of the original tempo when recording). If the
Song contains no performance data, all parts are set to
“OFF.” Pressing the [PART SAVE] button saves each part
playback setting (the tempo is not saved).

Reference pages
• Playing back the selected part(s) (page 122)
• Changing the tempo (page 123)

NOTICE

Searching for a Song

Do not remove the USB flash drive while it is being
accessed by the instrument. (If you are using a USB
flash drive which has a lamp, the lamp will flash when
the instrument is accessing the USB flash drive.)

Search for a desired Song by using the Search function.

For information on selecting the desired USB flash
drive, see page 108.

Press desired Song button in the
display.

Referring to the Song name and icons, select the
desired Song. The selected Song button is
highlighted in orange.

Insert the USB flash drive containing
the desired folder/Song.
Select the USB flash drive containing
the folder/Song.

Song containing data

Blank Song (containing no data)

Reference pages
• Changing the Song Name (page 116)
• Song icons (page 108)

112

ELS-02/ELS-02C Owner’s Manual

NOTE
Regardless of the current path, the Search operation will
be applied to the entire contents of the USB flash drive.

Selecting a Song

Press the [SEARCH] button in the
display.

Press the [OK] button.
The search will begin, and the detected folder/Song
name will be shown on the display.

NOTE
Previous searched data can be shown on the display.
However, the data does not appear if you’ve turned off the
power, removed the USB flash drive or saved the Song
after performing the search operation.

Press the [KEYWORD] button.

To cancel the Search operation, press the
[INTERRUPT] button.

Confirm the detected folder/Song name.
Detected folder/
Song list

Detected number
Displayed data number

7
Music Data Recorder (MDR)

Previous key word

Press the desired folder/Song.
The display will automatically exit from the
SEARCH display and the selected folder/Song
appears.

If nothing is detected, try the search again by using
another name (see step 4 above).

Enter the folder/Song name for
searching.
If necessary, press the [DELETE] button so that the
previous key word can be deleted, then enter the
new key word. (See page 116 for instructions on
changing the Song name.)
NOTE
• This function does not distinguish between capital and
lowercase letters.
• When searching for XG Songs, entering the extension
“.mid” is unnecessary.

ELS-02/ELS-02C Owner’s Manual

113

Recording

An hourglass icon appears at the bottom left of the
display, indicating that Registration data is currently
being read.
NOTE

Recording your performance

Regardless of the currently selected Unit number, the
recording operation will save data other than your
performance to the first Unit of the Song. This is why
pressing the [I] (Record) button will call up the dialog to
confirm whether OK or not to save data to the first Unit
when the Registration Unit other than the first Unit is
loaded. In this situation, pressing [OK] will go to the
Recording Standby mode while pressing [CANCEL] will
exit from the Recording mode.

Set the desired Registrations on the Electone. Make all
the Electone settings necessary for the Song you will
record. This means entering the all Registrations you will
need for the entire performance in the Registration
Memory. Make sure also to select the Registration that
you will use at the beginning of the Song.
NOTICE
Never attempt to remove the USB flash drive or turn the
power off during recording, reading or playback.

1
2

Insert a USB flash drive to the [USB TO
DEVICE] terminal.

5
6

Select a blank Song for recording your
performance.

Press the [SONG] button at the top right
of the display to call up the SONG Page,
then select the [I] (Record) button.
The following display appears, indicating that you
can record your performance.

After the hourglass disappears, begin
playing.
When you finish playing, press the
[J] (Stop) button in the display.
The recording is finished and the LCD returns to the
MDR display. The Song to which your performance
is recorded is automatically named “SONG_XXX”
(XXX indicates Song number). You can change the
Song name as desired. (For details, see page 116.)

For details on selecting a Song, see page 112.
If you want to overwrite an existing Song already
containing performance data, you will need to delete
it beforehand.

Press the [R] (Play) button.

NOTICE
Do not remove the USB flash drive from the Electone
while data is being recorded (while the hourglass icon
or other message is shown).

Re-recording (Retry)
If you make a mistake during recording, you can rerecord the Song from the beginning.

Press the [I] (Record) button while the
Song is still running.
This automatically stops recording and returns you
to the starting point of the Song.

NOTE
If a message appears indicating there is not enough free
space in USB flash drive, press the [CANCEL] button, then
delete any unnecessary Songs if possible or insert new
USB flash drive. To continue recording your performance
on USB flash drive that does not have enough space,
press the [CONTINUE] button.

114

ELS-02/ELS-02C Owner’s Manual

Recording

The following setting lets you record only Lower
Keyboard and Pedalboard parts.

Press the [R] (Play) or [CUSTOM PLAY]
button to begin rerecording the Song.
Re-recording starts from the beginning of the Song
and replaces the previously recorded performance
with the newly recorded performance.
NOTE
Pressing the [J] (Stop) button cancels the re-recording
and records the previous performance.

Recording specified parts only
NOTE
You should also set the Control button to “REC,” in order to
record Registration changes and expression pedal
operation.

3
4

1
2

Follow steps 1 – 3 on page 114 to call up
the Rec Standby display.

PLAY: Playback the parts that have been recorded.
OFF: Recording or playback is not active.
REC: Records the part.
If you set the Upper part to “REC,” the performance
on the Upper Keyboard (including Lead Voice 1
Voices) is recorded. Setting Lead to “REC,” however,
records only the Lead Voice 1 Voices. You cannot set
both Upper and Lead to “REC” at the same time;
neither can the Lower and Keyboard Percussion
parts be recorded at the same time.
NOTE
When you record the Keyboard Percussion, make sure that
the KEYBOARD PERCUSSION [1] button is set to on.

Press the [I] (Record) button to set up
recording of the next part — Upper part
in this case.

A message appears prompting confirmation of
operation. Select [OVERWRITE] to overwrite and
the Rec Standby display appears.

Select the parts for recording.
Each pressing of a part button switches the status:
PLAY, OFF, and REC.

Press the [J] (Stop) button when you
are finished with your performance to
stop recording.
Now you’ve recorded the first parts of your
performance.

NOTE
The Lead Voice 2 and the Keyboard Percussion 2 cannot be
recorded to each part separately.

Press the [R] (Play) button, and start
playing after the hourglass icon
disappears.

Music Data Recorder (MDR)

You can also record the parts of your performance
independently. This function lets you record Keyboard
Percussion and performance control data, such as
Registration changes and expression pedal operation,
separately from the other parts of the Song.
Even Keyboard Percussion 1 and Lead Voice 1 Voices can
be recorded separately, though, the Lead Voice 2 Voices
will be included in the performance data of the Upper
Keyboard. The following instruction is an example: First,
record the chords and bass to the Song using the Lower
and Pedalboard, and then record the melody using the
Upper Keyboard.

Select the parts for recording.
Set the next parts you want to record (in this case,
the Upper part) to “REC.”
Also set the part already recorded (in this case
Lower and Pedal parts) to “PLAY,” so you can hear
the previously recorded parts as you record new
ones.

Change the playback tempo for the
selected part.
The playback tempo can be set over a range of 50%
to 200% of the original.
The original recorded tempo is 100%; values less
than 100% result in a slower tempo while values
greater than 100% result in a faster tempo.
NOTE
Use the TEMPO [RESET] button in the display to reset the
tempo to its original value (100%).

ELS-02/ELS-02C Owner’s Manual

115

Changing the Song Name

Press the [CUSTOM PLAY] button to
start recording of the part selected in
step 6 (Upper part).
Playback of the previously recorded parts starts
immediately.
The [CUSTOM PLAY] button is used here to record
only the parts that have been selected for recording,
and plays back only those parts that have been
selected for playback. While you listen to the parts
being played back, start playing the melody on the
Upper Keyboard.
When the end of the recorded performance is
reached, playback is automatically stopped. The
length of a subsequently recorded part cannot
exceed the length of the previously recorded parts.

Punch-in recording

Changing the Song Name
You can name the Song, such as giving it a title or
indicating the date on which it was recorded. However,
Song names of EL-series Electones, such as the EL-900,
cannot be changed.
NOTE
When you change the name of an XG Song, the extension (.mid)
cannot be changed.

Select the Song whose name you want
to change.
For details on selecting a Song, see page 112.

2
3

Press the [TOOLS] button at the top
right of the display to call up the TOOLS
Page.
Press the [CHANGE NAME] button.
The following display appears.

This lets you re-record a specific phrase or section which
you don’t want to use, either that of a specific part(s) or
all parts.
NOTE
This function is best used when the phrase to be re-recorded
has definite beginning and end points, with slight pauses before
and after.

Select the Song which contains the
phrase you want to change.
For details on selecting a Song, see page 112.

2
3
4

Press the [R] (Play) button to start
playback of the Song.
Press the [K] (Pause) button at the
point you want to execute punch-in
recording.
Press the [I] (Record) button.
The Recording display appears, indicating that the
Music Data Recorder is ready to record.

5
6
7

116

Set the parts which you want to change
to “REC” status and other parts to
“PLAY.”
Press the [R] (Play) button to start
punch-in recording. Play the new
phrase, as you want it to be changed.
Press the [J] (Stop) button to quit the
punch-in recording as soon as you
reach the end of the phrase.

ELS-02/ELS-02C Owner’s Manual

Move the cursor to the desired point by
using the [L] [R] buttons in the display
or the Data Control dial.
Cursor

Changing the Song Name

Select the desired character type:
alphabet, upper or lowercase, or
symbol.

To convert into kanji (Japanese
language):
This applies only if you are using the
button in Japanese.

1
NOTE
If you select Japanese as the Language in the Utility
display (page 16), you can also select Japanese language
characters (hiragana and kanji, normal size katakana, half
size katakana, full size alphabet, and full size symbols).

NOTE
An XG Song name can contain up to 46 characters.

• The converted area can be cleared at once by
pressing the
(cancel) button.

After finished, select [OK] to actually
enter the name.
The LCD will return to the TOOLS Page display.

To actually enter the change, press the
[OK] button or enter the next character.
To enter the hiragana character itself
(without converting it), press the
(delete) button.

A “name is not available” message may appear when
you press the [OK] button to finish entering the
name. If this message appears, the name is invalid
and you should enter another name.
NOTE

To delete an entered character:

Move the cursor to the character you
want to delete.
Cursor

7
Music Data Recorder (MDR)

When the input “Hiragana” characters
are shown in the reverse display
(highlighted), press the
(kanjiconversion) button once or several
times to convert to the characters into
the appropriate kanji.
• The reversed area can be changed by the [L] [R]
buttons in the display or the Data Control dial.

Select the desired character for entry.
A Song name can contain up to 50 characters.

(Kana-Kan)

Songs are ordered in the following sequence: symbol,
number, alphabet, hiragana, kanji, other symbols. Names
with an asterisk (*) at the top are exceptions to this rule.

The following names cannot be used. (“xx” indicates
numbers.)
MDR_xx.EVT
SONG_xxx
MDR_xx.MID
MDR_xxx.TMP
MDR_xx.Bxx
REG_xxx.TMP
MDR_xx.Vxx
ELS_SONG.TMP
SONG.NAM
SONG_xxx.C02
ELS_SONG.NAM TMP
MDR_xxx.MID
TMP.E02
REG_xxx.B00

Press the [DELETE] button at the
bottom right in the display.
The character is deleted.

ELS-02/ELS-02C Owner’s Manual

117

Saving Registrations and Other Data to a Unit

Saving Registrations and
Other Data to a Unit
You can also record Registration Memory data and other
created data without recording a performance, as listed
below. The data will be saved to a Unit (page 98) of the
selected Song.

Press the [UNIT EDIT] button at the right
lower section in the display to call up
the Unit Edit display.
At the left side in the display, the Registration Unit
list of the current Song is shown, such as “UNIT 1”
and “UNIT 2.”

• Registration Memory related data (including the
Registration Shift settings)

Press the blank button at the lowest
position of the Registration Unit list.

• VA Custom Voice data (only for ELS-02C) and User
Voice data
• Keyboard Percussion data
• User Rhythm data
• Rhythm Sequence data

Select the destination (blank Song) to
which the created Registration Memory
data and other data will be saved.
For details on selecting a Song, see page 112.

2
3

When you want to use various Registrations exceeding
five Registration Banks (one Unit), you should save
additional Registration Units to a Song.
Reference pages
• Next Unit (page 100)
• Programming a Registration Sequence (page 174)

The above operation will simply create a new Unit which
will not be called up via Song playback, etc. To call up the
newly created Unit, set the order of the Registration Unit
(page 119), then make the Next Unit settings of
Registration Shift (page 99) and Registration Sequence
(page 174). Note that changing the Unit via the Next Unit
may result in no sound from the Electone for a few
seconds when User Voice data and VA Custom Voice data
differ between the current Unit and the next Unit.

Overwriting Registration data to
a Unit
This operation lets you replace just the Registration Unit
without changing the performance data in already
recorded Song data.

Select a Song containing the
performance data.
For details on selecting a Song, see page 112.

Press the [UNIT EDIT] button in the
display to call up the Unit Edit display.
The Registration Unit list is shown.

Select the destination Song which
includes Registration data.
For details on selecting a Song, see page 112.

118

NOTE

Make sure that all data types you want
to load are selected, then press the
[SAVE] button, followed by the [CLOSE]
button in the display.

Creating two or more
Registration Units in a Song

Press the [SAVE] button.
This operation will add a new Unit next to the
lowest Unit.

Press the [UNIT EDIT] button at the
lower right section in the display to call
up the Unit Edit display.

A message appears on the display, indicating the
data is currently being saved.
After the message disappears, press the [CLOSE]
button to return to the SONG page, then “SONG
XXX” (XXX: number) is assigned as Song name to
the destination Song.

ELS-02/ELS-02C Owner’s Manual

Select the Registration Unit you wish to
overwrite.

Saving Registrations and Other Data to a Unit

Press the [SAVE] button.

A message appears, prompting confirmation of
overwriting the Registration Unit. Press
[OVERWRITE] to overwrite (replace), or press
[CANCEL] to abort the operation.

Change the order of the Registration
Units.
From the Registration Unit list at the left end in the
display, select the desired Unit then use the MOVE
buttons to move the order of the selected Unit.

NOTE
Also with the following operations, only Registrations and other
data (excepting performance data) can be recorded.

1. Select the desired Song number to which you want to record.
2. Press the [I] (Record) button to set recording to standby.

3. Press the [R] (Play) button, then press the [J] (Stop) button
without playing the keyboard.

5
6
7

Changing the order of the
Registration Units

1 Registration Unit list

NOTE
The first Unit (located at the top) will be called up first after Song
playback starts.

From the SONG page, select a Song
which contains two or more
Registration Units.
For details on selecting a Song, see page 112.

Press the [UNIT EDIT] button in the
display to call up the Unit Edit display.

Lists the Registration Units included in the current Song.
When the current Song contains five or more
Registration Units, the scroll button
can be used
to scroll through the Registration Unit list. The selected
Unit is highlighted in orange.

2 MOVE buttons
Moves the Registration Unit selected at 1 up or down
one by one.

3 DATA TO BE LOADED

7
Music Data Recorder (MDR)

To call up another Registration Unit from the
Registration Shift (page 99) and Registration Sequence
(page 174) as the Next Unit, you should change the order
of the Registration Units as desired on the Unit Edit
display.

When loading the Registration Unit selected at 1, use
these buttons to select only the desired data. For more
information, see page 120.

4 LOAD
Loads the Registration Unit selected at 1 according to
the settings of 3.

5 SAVE
Saves the Registration Memory data to the Registration
Unit selected at 1.

6 COPY
Creates the copy of the Registration Unit selected at 1,
and then locates the copied Unit at the bottom of the
Registration Unit list (1).

7 DELETE
Deletes the Registration Unit selected at 1.

Press the [CLOSE] button at the top
right in the display to close the Unit Edit
display.

ELS-02/ELS-02C Owner’s Manual

119

Recalling Recorded Registrations
NOTE

Recalling Recorded
Registrations
Registrations (and bulk data) recorded to Song numbers
can be easily loaded back to the Electone by the following
procedure. The MDR independently recalls the following
five types of data:

When you load the Registration data by using the Next
Unit function, all data will be loaded no matter which
buttons you select here.

A message appears, prompting confirmation of the
operation. Press the [LOAD] button to load the
Registration data.
Press [CANCEL] to cancel the operation.

• REGIST

NOTE

• USER VOICE

If you load a Registration while a rhythm is playing,
sequence data and User rhythms in the Registration data
cannot be loaded.

• K.B.P.
• USER RHYTHM
• SEQUENCE
You can select and recall the desired data independently.

Insert the USB flash drive and select the
Song you want to load back to the
Electone.
For details on selecting a Song, see page 112.

2
3

120

Press [UNIT EDIT] button in the display
to call up the Unit Edit display.
Select the Unit you want to load to the
Electone.

Using the five “DATA TO BE LOADED”
buttons, select the desired data you
want to load.

ELS-02/ELS-02C Owner’s Manual

Press the [LOAD] button.

Exit from the Unit Edit display by
pressing the [CLOSE] button at the top
right of the display.

When you select the Protected Song, the buttons
(DATA TO BE LOADED) may be unavailable
(grayed out). For example, combining a part of one
Protected Song with another Protected Song is not
allowed.

Playing Back a Song

About Protected Songs
If you buy or download Song data, it may be
protected so that you cannot delete or copy, in order
to prevent accidental erasure or protect copyright.
These are called Protected Songs. Protected Songs
can be saved to a USB flash drive confirmed by
Yamaha. A Protected Song can be played back in the
same way as Songs you’ve created, but it cannot be
converted to XG format or EL format. It is not
possible to edit the Registration data in the Protected
Song, nor can the performance data be overwritten. If
you want to edit a Protected Song, first copy it within
one USB flash drive/folder, then edit the copy. (You
cannot copy to another USB flash drive/folder.) The
copied Song (called “Protected Edit Song”) is
available only when the original Song (called
“Protected Original Song”) exists in the same folder.
Be careful not to delete the Protected Original Song.

Playing Back a Song
This section describes how to play back a Song recorded
with the MDR and the commercially available Song data
which can be played back with the MDR

For details on selecting a Song, see page 112.

When a Song contains both Registration data
and performance data:
Starting playback of such a Song will load only
Registration data (an hourglass icon appears), and
then begin actual playback of the performance data.

Folder
Protected
Edit Song

When the Song contains only the
performance data:

Copy

Starting playback of such a Song will start playback
of the performance data immediately.
You can edit this Song,
only when it is in the folder
that contains a Protected
Original Song.

NOTICE
To move the Protected Song in a USB flash drive with a
computer, you’ll need to use the Musicsoft Downloader
application. If you move the Song without Musicsoft
Downloader, the Song cannot be played back. Musicsoft
Downloader can be obtained at the following Internet
address: http://download.yamaha.com/

7
Music Data Recorder (MDR)

Depending on the Song, no note icon is shown by
the file name, indicating that only Registration data
is included and there is no performance data.
Starting playback of such a Song will load only
Registration data (an hourglass icon appears), and
then return operation to the SONG page.

When you want to edit a Protected Song, first initialize
the Registration Memory, then select the desired Song.
If you have not initialized the Registration first, the
edited Song may not be saved.

You cannot edit
this Song

Press the [R] (Play) button in the
display to start playback.
When the Song contains only the Registration
data (without performance data):

NOTICE

Protected
Original Song

Select the Song to be played back.

Reference page
• Changing the order of the Registration Units (page 119)

When you want to stop playback, press
the [J] (Stop) button on the display.
Although playback will stop automatically as soon as
playback position reaches to the end of the Song
data, you can stop playback at the middle of the
performance data by pressing the [J] (Stop) button
on the display.
NOTE
• When two or more Units are included in the current Song,
starting playback will load the Registration Unit shown at
the top in the Unit Edit display.
• Registration data is generally not included in most Song
data, such as commercially available XG Songs created
on instruments other than the Electone.

ELS-02/ELS-02C Owner’s Manual

121

Playing Back a Song

Custom Play

To play back the selected part(s) of XGcompatible Song data:

If you want to play back a Song without resetting the
Registrations, press the [CUSTOM PLAY] button
instead of the [R] (Play) button. This displays the
Song time and starts playback immediately.

Press the Part [XG] button while XG-compatible Song
data is being played back.
The following XG PART SETUP display appears.
Reference page
• Converting to XG (page 129)

When you play a Song using the Next Unit function,
always press the [R] (Play) button to start the Song,
not the [CUSTOM PLAY] button.

Playing back the selected part(s)
You can also play back selected parts of your recorded
performance, while other parts are temporarily turned
off. This function is especially useful for playing a single
part, such as the melody, over previously recorded
accompaniment parts.

Press the appropriate channel buttons (e.g., the [CH1]
button) to set each channel to playback or mute. Each
pressing of a button switches the status: PLAY and OFF.
Set a part to [PLAY] if you want it to play back and [OFF]
if you do not.
The [ALL] button enables you to switch all channels to
PLAY/OFF at once.
To set each channel’s volume use the sliders. Each
channel’s volume can be adjusted between 0 and 100.
The [ALL] slider adjusts the overall volume.

Fast forward, Rewind and Pause
To play back the selected part(s):
During playback or in the Settings display, press each part
button to turn the part you want to playback to “PLAY”
and the part you want to mute to “OFF.” Each pressing of
a part button switches the status between PLAY and OFF.
Pressing the [PART SAVE] button saves each part’s
playback status.
Reference page
• About the [SETTINGS] button (page 112)

Fast forward and Rewind:
During playback, press the [RR] (Fast forward) button
or [LL] (Rewind) button and hold it down until the
time reaches the desired position.
Even when the button is released, playback is paused. To
resume playback from the point you’ve advanced or
reversed to, press the [R] (Play) button or [CUSTOM
PLAY] button.

Pause:
If you want to temporarily stop playback of the Song or
Songs, press the [K] (Pause) button.
To resume playback from the point at which the Song was
paused, press the [R] (Play) button or [CUSTOM PLAY]
button.

122

ELS-02/ELS-02C Owner’s Manual

Playing Back a Song

Changing the tempo
You can change the tempo of the Song as the Song is
playing in the MDR display, either while the Song is
stopped or while it is playing.
NOTE
The tempo cannot be set for a Song containing no performance
data.

To change the tempo:
Use the TEMPO
buttons in the display or the
Data Control dial to change the tempo. (The TEMPO dial
on the panel cannot be used to change the tempo for the
Music Data Recorder.) The range is 50 – 200%. The
original recorded tempo is 100% and values less than
100% indicate slower tempo; values greater than 100%
indicate faster tempo.

Repeat playback
This feature allows you to repeatedly play back either all
Songs in a folder or only one specific Song.

Select the Song you wish to play back.
If you wish to play back all Songs in a folder, select
the first Song that will be played back. For details on
selecting a Song, see page 112.

2
3

Press the [SONG] button at the top right
of the display to call up the SONG Page.
Press the
(SETTINGS) button on
the panel to call up the Settings display.

7
Music Data Recorder (MDR)

To reset the changed tempo:
Use the TEMPO [RESET] button in the display to reset
the tempo to its original value (100%).

Press the REPEAT button to select the
repeat mode.
Each press of the button switches among the modes.

REPEAT button

ELS-02/ELS-02C Owner’s Manual

123

Displaying the Score

SINGLE
Repeats the currently selected Song indefinitely.
ALL
Repeats all Songs in the currently selected folder in
order.

5
6

Displaying the Score

RANDOM
Repeats all Songs in the currently selected folder
randomly.

The MDR display can display music notation (score) of
the performance data recorded to USB flash drive. You
can change the size and the number of staffs to be
displayed.
While a Song is being played back, the cursor moves
according to the performance and the pages are
automatically turned.

OFF
Cancels repeat playback.

Exit from the Settings display by
pressing the
(FINISH) button at
the top right of the display.

Select the Song containing performance
data.
For details on selecting a Song, see page 112.

Press the [SCORE] button in the display.
The currently selected Song score will be displayed.

Press the [R] (Play) button in the SONG
Page to begin playback.

NOTE
Scores for Protected Songs cannot be displayed,
excepting those Songs that specifically allow score
display.

Press the [R] (Play) button in the
display to start playing back the Song.
As the Song plays back, the cursor moves
accordingly and the page is automatically turned at
the appropriate point.
In this condition, pressing the [I] (Record) button
in the display lets you record a Song and have the
score displayed for you.

124

ELS-02/ELS-02C Owner’s Manual

Displaying the Score

The score size can be adjusted by pressing the [SIZE
CHANGE] button in the display. Each press of the
[SIZE CHANGE] button alternates the score size in
the following sequence: normal, large, extra large,
small, normal, and so on.
Please note that the size cannot be changed while a
Song is being recorded.

Changing the score contents
and settings
The Score Settings display lets you choose the contents to
be displayed. In this display, you can also assign the Next
Page function to the left foot switch:

NOTE
The score size setting cannot be stored to a Registration
Memory.

You can manually turn score “pages” by
first stopping playback of the Song by
using the [J] (Stop) or [K] (Pause)
button, and then pressing the PAGE [L]
or [R] buttons in the display.

1
2

Press the [SET UP] button in the display
to call up the SCORE SETTINGS display.
NOTE
Please note that the score settings cannot be changed
while the Song is being recorded. The [SET UP] button is
disabled during recording.

Pressing these buttons moves to the previous or next
page. The PAGE [R] button can be assigned to the
left foot switch (page 125).

To exit the score, press the [SCORE
OFF] button in the display.

Music Data Recorder (MDR)

Display the score.

Change the score settings.
To set whether a specific part is displayed or not in
the score, press the appropriate [ON] or [OFF]
buttons of each part. Please note that at least one of
the upper keyboard, lower keyboard or pedalboard
will be set to [ON].
Available settings for notes and how they will be
displayed (NOTE) include [A, B, C] (conventional
C-D-E indications), [FIXED DO] (solfeggio),
[MOVABLE DO] (relative solfeggio) and [OFF].
For the CH SETTINGS, the upper keyboard, lower
keyboard and pedalboard can be assigned to the
channels with the [] and [] buttons. You can

ELS-02/ELS-02C Owner’s Manual

125

Other Functions (Tools)

also use the Data Control dial to select channels
after pressing the [] or [] button.
Selecting [AUTO] automatically assigns parts to the
channels according to the Song data.
To set the QUANTIZE value use the [] and []
buttons. You can also use the Data Control dial to
select channels after pressing the [] or [] button.
The shorter the selected note value, the more
precisely the score is displayed.
Setting the NEXT PAGE L. Foot SW [ON] lets you
turn the score to the next page with the left foot
switch. You can also turn the score to the next page
with the PAGE [R] button in the display. If rhythm,
glide and/or rotary speaker are assigned to the left
foot switch and set on, both the assigned functions
and the Next Page function work.
NOTE
• The score display settings cannot be stored to a
Registration Memory. However, the ON/OFF setting of
turning pages using the left foot switch can be saved to
the Unit as Registration data common to all the
Registration Memory numbers.
• Setting the NOTE to [MOVABLE DO] displays each key
note as “Do.”

Reference page

Other Functions (Tools)
The TOOLS Page in the MDR display has many
functions, such as Song copy, Song delete, etc.

Song copy
This function lets you copy a folder/Song. You can copy
and exchange the data even between two different USB
flash drives. (For Songs created on EL-series instruments,
such as the EL-900, one-by-one copy cannot be
executed.) Make sure to check the remaining memory of
the destination media in advance.
NOTE
• If the folder already contains 120 XG Songs the Songs can not be
copied, or if the folder already contains 120 folders the folder can
not be copied.
• A Song having a name/path that is too long may not be copied to
the root directory, even if the amount of folders/XG Songs has not
reached the maximum capacity.
• The Copy operation is automatically stopped if there is an
unrecognizable file in MDR

• About Quantize (page 155)

Exit from the SCORE SETTINGS display
by pressing the [CLOSE] button at the
top right of the display.

Moving a Protected Song
A Protected Song can be copied within a folder, but it
cannot be copied to another folder or USB flash
drive. If you specify another folder or USB flash drive
as the copy destination, a message appears prompting
moving of the Song — but not copying. When the
[MOVE] button is pressed, the Protected Original
Song and all Protected Edit Songs which come from
the same Protected Original Song will be moved
together. This effectively “moves” a Protected Song,
but does not “copy” it.
If you copy a folder which contains both Nonprotected Songs and Protected Songs, the copy
operation will be automatically executed for only
Non-protected Songs, and Protected Song will be
moved (not copied).
NOTE
If you copy a Protected Song to the same folder as the
source Song, the copied Song will be the Protected Edit
Song.

126

ELS-02/ELS-02C Owner’s Manual

Other Functions (Tools)

To copy a Song:
You can copy Song data within the USB flash drive, and
also to another USB flash drive.
Connect the USB flash drive containing the Song and (if
necessary) a USB flash drive for the copy destination to
the [USB TO DEVICE] terminals, then follow the
instructions below.
NOTICE
Insert the USB flash drive to the [USB TO DEVICE] terminal
firmly. If the USB flash drive is not inserted firmly, the data
may be lost.

Select the folder/Song/USB flash drive
to be copied.
For details on selecting a Song, see page 112.

Press the [COPY] button in the display
to call up the COPY TO display.

Press the [EXECUTE] button to execute
the copy.
The folder/Song name in the destination is the same
as the one of the source Song. If you copy a folder/
Song to a folder that contains a Song whose name is
the same as the source Song, the copied name will be
“source Song name_XXX” (XXX indicates Song
number). If you want to change the folder/Song
name, see page 116.
If you copy an XG-compatible Song to another
folder or USB flash drive that contains a Song with
the same name as the source Song, a message
appears prompting confirmation of overwriting the
Song. Selecting [OVERWRITE] overwrites the XGcompatible Song in the destination.
NOTICE
• Never attempt to eject the USB flash drive or turn the
power off during copying (or moving a Protected
Song). Data may be lost.
• Removing the USB flash drive during operation may
result in loss of the data. Never attempt to remove
the USB flash drive unless the “Eject the source
media” message appears.

NOTE
• While the copy operation is in progress, the approximate
time of copying appears on the display; keep in mind that
the actual time necessary may differ.
• If the USB flash drive copy is executed, the folder name
“#MEDIA” will be created in the destination folder.
• If the message “The source folder hierarchy is too deep”
is displayed, copy each folder in the folder, one by one
manually.

7
Music Data Recorder (MDR)

Press the [TOOLS] button at the top
right of the display to call up the TOOLS
Page.

• If the “Path name is too long” message is displayed,
change the hierarchy or rename the folder name to make
it shorter.
• The copy operation will automatically be stopped if an
unrecognizable file is detected in the folder.

How to cancel the folder copy operation
If you want to cancel the folder copy operation while
the copy operation is in progress, press the
[CANCEL] button.
Keep in mind, however, that cancelling the operation
may take a long time, since the operation is stopped
only after all files in the current folder are copied.
If you cancel the operation, make sure to check which
files have been properly copied and which have not.

(If necessary) Change the destination.
For details on changing the destination, see
page 112.

ELS-02/ELS-02C Owner’s Manual

127

Other Functions (Tools)

Instructions when only one [USB TO
DEVICE] terminal is available:

It is recommended that you use connect both USB flash
drives (source and destination) to the [USB TO DEVICE]
terminals. However, if there are not enough terminals
available, you can copy a Song by following the procedure
below.
Folder copy cannot be executed with this procedure.

1
2
3

Press the [EXECUTE] button to execute
Song Copy. Select [CLOSE] or
[CANCEL] to abort the operation.
The Song is copied with the same name as the
source Song. If you copy a Song to a folder that
contains a Song whose name is the same as the
source Song, the copied Song name will be “source
Song name_XXX” (XXX indicates Song number).
If you copy an XG-compatible Song to another
folder or USB flash drive that contains a Song with
the same name as the source Song, a message
appears prompting confirmation of overwriting the
Song. Selecting [OVERWRITE] overwrites the XGcompatible Song in the destination.
If you want to change the Song name, see page 116.

Follow steps 1 – 3 on page 127.
Press the
(UP) button several
times until the Media List is displayed.
Select “MEMORY” as the destination.

NOTE
By pressing the [CANCEL] button, you can cancel the
operation which is being executed, then return the
Protected Song to the original USB flash drive. For details,
follow the on-screen instructions.

When moving a data-heavy Protected
Song:

When the Song being moved contains a large amount
of data, the move operation cannot be completed in a
single pass. In such a case, repeat steps 6 to 8 by
following the on-screen instructions.

Press the [EXECUTE] button to execute
the Song Copy.
The Song to be copied is copied to the internal
memory of the Electone. The message “Eject the
source media” will appear on the display.
NOTE
If you want to abort the operation, press the [CANCEL]
button.

NOTICE
Never attempt to turn the power off during copying of a
Protected Song. Data may be lost.

Eject the source USB flash drive.
After ejecting the source USB flash drive, the
message “Insert the destination media” will appear
on the display.

6
7

Insert the destination USB flash drive to
which you want to copy.
Select the destination.
For details on specifying the destination, see
page 112.

128

ELS-02/ELS-02C Owner’s Manual

Song delete
You can delete the data of one Song. You can specify for
deletion only Registration data, only the performance
data, or both (entire Song). Also, only the Songs created
on the ELS-02/ELS-02C and XG-compatible Songs can be
deleted. Songs created on the EL series instruments such
as the EL-900 cannot be deleted.

Select the Song to be deleted.
For details on selecting a Song, see page 112.

Press the [TOOLS] button at the top
right of the display to call up the TOOLS
Page.

Other Functions (Tools)

Press the [DELETE] button in the
display.
A message appears, prompting confirmation of the
operation.
Confirm that the Song to be deleted is shown in the
display. If you want to change the Song, press the
[CANCEL] button and select the desired Song.

Press the button of the specific data you
want to delete (“DELETE ALL,”
“DELETE REGIST” or “DELETE
PERFORMANCE”). The selected data
will be deleted.

Converting to XG
Song data recorded on the ELS-01 series and ELS-02
series instruments can be converted to XG-compatible
data which can be played back by XG-compatible devices.
Before executing the conversion, confirm that the USB
flash drive contains enough amount of available memory.
NOTE
• The converted XG Song data may sound differently from the
original data.
• Protected Songs cannot be converted.

Select a Song to be converted to XG.
For details on selecting a Song, see page 112.

Press the [CONVERT] button.
A “Which do you want to select?” message appears.

• DELETE ALL: Deletes the entire Song.
• DELETE REGIST: Deletes only Registration
data in the Song.
• DELETE PERFORMANCE: Deletes only
performance data in the Song.

7
Music Data Recorder (MDR)

Press the [TOOLS] button at the top
right of the display to call up the TOOLS
Page.

Pressing [CANCEL] aborts the operation.

When deleting folders, Songs with only
registration, Songs with only
performance data, Protected Songs or
XG-compatible Songs:

Select [DELETE] to actually delete the data, or select
[CANCEL] to abort the operation.

ELS-02/ELS-02C Owner’s Manual

129

Other Functions (Tools)

Press the [CONVERT TO XG] button.

The following display appears.

In the TOOLS Page, press the
[CONVERT] button.
A “Which do you want to select?” message appears.

(If necessary) Change the destination
for saving the converted Song.
For details on changing the destination, see
page 112.

Press the [EXECUTE] button.
A message appears indicating that the converted
data is being checked and the MDR starts playback
of the selected Song. When playback is finished, the
display returns to the previous display.
NOTE
Any playing of the keyboard or pressing of the panel
controls during the confirmation of the conversion will be
recorded to the converted XG-compatible Song.

Press the [CONVERT ELS  EL] button.
After the dialog appears, select the destination of the
converted data from F01 – F99.

Converting ELS format to EL
Song data recorded via the ELS-01 series and ELS-02
series can be converted to EL series-compatible data. The
converted data in the USB flash drive can be played back
by EL-series instruments to which the MDR-5 has
already been installed. After creating the folders named
“F01” – “F99” on the root directory in the USB flash
drive, execute the instructions below.
NOTE
Protected Songs cannot be converted.

Reference page
• About Protected Songs (page 121)

Select the Song to be converted to ELseries format.
For details on selecting a Song, see page 112.

130

ELS-02/ELS-02C Owner’s Manual

Press the [EXECUTE] button in the
display.

Other Functions (Tools)

Converting EL format to ELS
If Song data created on an EL-series instrument, such as
the EL-900, is saved in the USB flash drive, you can
convert the Song data to data compatible with the ELS
series.

Select the Song you want to convert.
For details on selecting a Song, see page 112.

Checking the remaining memory
When a USB flash drive is selected on the TOOLS page,
pressing the [INFORMATION] button will indicate the
remaining memory in the USB flash drive. When a Song
is selected on the TOOLS page, pressing the
[INFORMATION] button will indicate the data capacity,
amount of the Bank, Song title, composer of the Song,
etc. The indicated items differ depending on the Song.

In the TOOLS Page, press the
[CONVERT] button.
A message appears confirming if you want to
convert from the EL format to the ELS format.

Music Data Recorder (MDR)

Press the [CONVERT EL  ELS] button
in the display, then specify the
destination for the converted Song.
Press the [EXECUTE] button in the
display to start conversion.

ELS-02/ELS-02C Owner’s Manual

131

8 Audio
The convenient [AUDIO] button allows you to play back audio files (.WAV) saved to a USB flash drive.
Moreover, since you can record your performances and recordings as audio data (.WAV) to a USB flash drive,
it is possible to play back the files on computer, share them with your friends, and record your own CDs to
enjoy as well.

Audio file

Computer

USB flash drive

External
audio device

Compatible USB flash drives
Please make sure to use the compatible USB flash drives
listed in the Compatible USB Device List downloadable
from the Yamaha website:

Recording Your
Performance as Audio

http://download.yamaha.com/
Use of unsupported devices may result in data saving/
recalling operations to abort, etc. Before using a USB
flash drive, be sure to read “Connecting a USB device” on
page 110.
NOTICE
To avoid the possibility of malfunction/ damage to data,
follow the notices below.
• Yamaha recommends that you format a USB flash drive,
after checking if the USB flash drive does not contain any
important data, and to use it only for audio recording/
playback. Using MDR Songs and audio data together in
the same drive may cause severe fragmentation of the
USB flash drive, and may stop audio recording/playback
altogether.
• Insert the USB flash drive firmly and take care that the
USB flash drive does not loosen from the connection from
sudden shaking while performing, etc. during audio
recording/playback. If the USB flash drive is disconnected
while recording, it may result in data corruption in the
USB flash drive.

Audio Recording
With this method, recorded performances are saved
to a USB flash drive as an audio file. An Audio file is a
recording of the performed sound itself. Since it is
saved in stereo WAV format of normal CD quality
resolution (44.1kHz/16bit), it can be transmitted to
and played on portable music players by using a
computer. You can also record the monophonic
sound of an external device since all the sounds
produced via your vocal or guitar performance and
the sound input from the [MIC./LINE IN] jack will
be recorded.
NOTE
• The sound input from the [AUX IN] jack cannot be recorded.
• Keep in mind, however, that Audio recording cannot be used
to save Registrations. If you want to save Registrations,
perform the “Recording” operation described on page 114 in
chapter 7.

Try recording your performance as an audio file to a USB
flash drive. Maximum amount of recording time is 60
minutes per recording, though this may be less
depending on the capacity of the particular USB flash
drive.

File format that can be recorded
.wav — 44.1 kHz sample rate, 16-bit resolution, stereo
NOTE
The file extension does not appear in the Electone display.
However, it can be viewed on a computer.

132

ELS-02/ELS-02C Owner’s Manual

Recording Your Performance as Audio

Connect a compatible USB flash drive
to the [USB TO DEVICE] terminal.

Press the [I] (Record) button to engage
Standby status for recording.

Reference Page
• Compatible USB flash drives (page 132)

Press the [AUDIO] button located at the
top right on the panel to call up the
AUDIO Page.
DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

8
Start recording by pressing the
[R] (Play) button, and then start your
performance.

Audio

When recording begins, the elapsed recording time
is shown in the lower left of the AUDIO Page. Once
the elapsed recording time is shown, you can load
the Registration or play the Song with the MDR.
NOTE
Songs you’ve created on the Electone will not be shown in
the AUDIO Page even when the USB flash drive contains
Songs.

Select a blank audio file for recording
your performance.
To call up a blank audio file, press the
(IN)
button in the display of step 2 to open the USB flash
drive, then select the blank audio file. Since the
operation for selecting audio files is the same as that
for Songs, refer to the “Selecting a Song” on
page 112.

Elapsed recording time

NOTICE
Never attempt to disconnect the USB flash drive or turn
the power off during recording. Doing so may corrupt
the USB flash drive data or the recording data.

When you finish playing, press the
[J] (Stop) button.
Recording stops and the audio file to which your
performance is recorded is automatically named and
selected in the AUDIO Page.

ELS-02/ELS-02C Owner’s Manual

133

Playing Back Audio Files

To hear your newly recorded
performance, press the [R] (Play)
button in the AUDIO Page.

Playing Back Audio Files
Try playing back audio files from a USB flash drive
connected to this instrument.
NOTE
This instrument cannot play back DRM protected files.

File format that can be played back
.wav — 44.1 kHz sample rate, 16-bit resolution, stereo

Connect the compatible USB flash drive
containing the audio file to be played
back to the [USB TO DEVICE] terminal.
Reference Page
• Compatible USB flash drives (page 132)

Press the [AUDIO] button located at the
top right on the panel to call up the
AUDIO Page.
DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

Reference Page
• Deleting the File/Changing the File Name (page 137)

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

Recording the Song playback as an
audio file
Once you’ve recorded your performance as a Song
using the MDR function, you can record the playback
of the Song as an audio file.

1
2
3
4

134

Connect two compatible USB flash
drives, one containing the Song, and
another for recording audio files, to the
[USB TO DEVICE] terminals.
Start audio recording (perform steps 2 –
5 above).
Select the Song on the MDR Display,
then start playback of the Song.
Play back the Song to the end of the Song.
Stop the audio recording (perform steps
6 and 7 above).

ELS-02/ELS-02C Owner’s Manual

NOTE
Songs you’ve recorded using the MDR function on this
Electone and Protected Songs will not be shown in the
AUDIO Page, even when the USB flash drive contains
Songs.

Playing Back Audio Files

Select the desired audio file for
playback.

Rewind, Fast Forward and Pause

To simply play an existing audio file, select the
desired audio file (containing data), referring to the
audio file name and icon
. Since the operation
for selecting audio files is the same as that for Songs,
refer to instruction steps 2 and 3 in “Selecting a
Song” on page 112.

Rewind and Fast Forward:

Press the [R] (Play) button in the AUDIO
Page to call up the Playback Page of the
AUDIO Page.

Pause:
If you want to temporarily stop playback of the audio file
press the [K] (Pause) button. To resume playback from
the point at which the audio file was paused, press the
[R] (Play) button again.

8
Audio

When playback begins, the elapsed time is shown in
the lower left of the display.

During audio playback (or when paused), press the
[LL] (Rewind) button or the [RR] (Fast forward)
button and hold it down until the time reaches the
desired position. When the button is released, playback is
paused at the desired position. To resume playback from
the point you’ve reversed or advanced to, press the
[R] (Play) button.

Press the [J] (Stop) button to stop
playback.
The display returns to the AUDIO Page.
NOTICE
Never attempt to disconnect the USB flash drive or turn
the power off during playback. Doing so may corrupt
the USB flash drive data.

ELS-02/ELS-02C Owner’s Manual

135

Playing Back Audio Files

To adjust the Volume:

Changing the Volume, Tempo
and Pitch

Touch the VOLUME slider in the display or use the
Data Control dial.
Range: 0 – 127

To change the Tempo:

You can change the volume, tempo and pitch of the audio
file as the file is playing.

Use the TEMPO
buttons in the display or
the Data Control dial to change the tempo. The
value can be adjusted from 75% to 125% and the
default value is 100%. Higher values result in a faster
tempo. If you press the TEMPO [RESET] button in
the display or select another audio file, this setting is
restored to the default value.
Range: 75% – 125%

Connect the compatible USB flash drive
to the [USB TO DEVICE] terminal.
Reference Page
• Compatible USB flash drives (page 132)

2
3

Press the [AUDIO] button.

To change the Pitch:
Use the PITCH
buttons in the display or
the Data Control dial to change the tempo. This lets
you shift the pitch of an audio file in semitone steps
(from -12 to 12). If you press the PITCH [RESET]
button in the display or select another audio file, this
setting is restored to the default value (0).
Range: -12 – +12

Select the desired audio file for
playback.
Since the operation for selecting audio files is the
same as that for Songs, refer to instruction steps 2
and 3 in “Selecting a Song” on page 112.

NOTE
• Changing the playback tempo or pitch of an audio file
may change its tonal characteristics.
• Volume, tempo and pitch changes are temporary; these
values revert to their defaults when the power is turned
off and then back on again.

5
4

Press the
(SETTING) button to
call up the Setting display.

Play back the audio file to hear and
check the changes you’ve made in the
Setting display.

Repeat playback

Press the REPEAT button as often as
necessary to select the desired repeat
mode.
Each press of the button switches among the modes.
(SINGLE)
Repeats the currently selected Song indefinitely.
(ALL)
Repeats all Songs in the currently selected folder in
order.
(RANDOM)
Repeats all Songs in the currently selected folder
randomly.

2
3
136

ELS-02/ELS-02C Owner’s Manual

(OFF)
Cancels repeat playback.

Exit from the Setting display by
pressing the
(FINISH) button at
the top right of the display.
Press the [R] (Play) button in the AUDIO
Page to begin repeat playback.

Other Functions (Tools)

To delete the file:

Other Functions (Tools)
Creating a New Folder/Deleting
the File/Changing the File Name
You can delete the file or change the file name.

Connect the compatible USB flash drive
containing the audio files to the [USB
TO DEVICE] terminal.
Reference Page
• Compatible USB flash drives (page 132)

2
3

To rename the file:
Press the [RENAME] button to call up the
CHANGE NAME display. For details on how to
enter characters, refer to the “Changing the Song
Name” on page 116. You can cancel the operation at
this point by pressing the [CANCEL] button. To
finalize the name, press the [OK] button. The audio
file will be renamed and the display returns to the
AUDIO page.

Press the [AUDIO] button.
Select the desired audio file.
Since the operation for selecting audio files is the
same as that for Songs, refer to instruction steps 2
and 3 in “Selecting a Song” on page 112.

Press the [DELETE] button in the display. A
message appears prompting confirmation of the
operation. You can cancel the operation at this point
by pressing the [CANCEL] button. If you want to
delete the file, press the [DELETE] button in the
display. The audio file will be deleted and the display
returns to the previous display.

In this page, you can delete or rename the audio file.

Audio file copy
To copy an audio file:
Perform the same operation as in steps 1 – 5 in “Song
copy” on page 126 in chapter 7.

8
Audio

Press the [TOOLS] button at the top
right of the display to call up the TOOLS
Page.

To return to the AUDIO page from the TOOLS Page,
press the [AUDIO] button in the display.

NOTE
• An audio file cannot be copied to the same folder that includes
the source audio file.
• Since copying of an entire folder including audio files cannot be
performed, copy the desired audio files one by one.
• When only one [USB TO DEVICE] terminal is available, an audio
file cannot be copied between different USB flash drives.

To check the remaining memory:
When an Audio file is selected on the TOOLS page,
pressing the [INFORMATION] button indicates the data
capacity and playback time. When a USB flash drive is
selected on the TOOLS page, pressing the
[INFORMATION] button indicates the remaining
memory in the USB flash drive.

To initialize (format) a USB flash drive:
Perform the same operation as in steps 3 – 5 in
“Formatting a USB Flash Drive” on page 111 in chapter 7.

To create a new folder:
Press the [CREATE FOLDER] button in the display,
then perform the same operation as in the
explanation of “CREATE FOLDER” in “Using the
MDR Display” on page 106 in chapter 7.

ELS-02/ELS-02C Owner’s Manual

137

9 Voice Edit
This Electone has a Voice Edit feature that allows you to create your own Voices. We suggest that you read
through the Voice Structure below at first to get a firm understanding of what comprises a Voice. Then go
through the editing steps, referring to page 140 for editing of an AWM Voice, or page 143 for editing of a VA
Voice.
NOTE
Super Articulation Voices cannot be edited.

VA Voice structure

Voice Structure
The internal structure of the Voices of this Electone is
explained below. Refer also to “Tone Generators of the
ELS-02 Series” (page 39).

AWM Voice structure
AWM Voices consist of up to eight recorded samples of a
real instrument.
Each waveform, referred to as an “Element,” can be
edited, by changing the level (volume), filter settings, and
so on. A single Voice contains eight “boxes” (AWM1 –
AWM8) in which the Elements are put. If a Voice consists
of less than three Elements, some boxes are empty. For
example, Strings 1 consists of two Elements (as shown).

Strings 1
Element1

Element2

AWM1

AWM2

AWM3

AWM4

AWM5

AWM6

AWM7

AWM8

You can add Elements from other Voices – Brass, for
example – if a box (AWM3 – AWM8) is empty. This
allows you to create your own original ensemble sounds.
In the Voice Edit function, you can edit not only each
Element, but also assemble some Elements from other
Voices.

138

ELS-02/ELS-02C Owner’s Manual

VA Voices are made by simulating the characteristic
behavior of acoustic instruments.
You can edit the Voice’s volume and timbre. Moreover,
you can also add AWM Elements to a VA Voice to create
your own original Voice.
VA Voices are available only on the Lead Voice 2 section
of the ELS-02C. All Voices in the other Voice sections are
AWM Voices.

Editing a Voice

DISPLAY SELECT

Editing a Voice

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

Selecting a Voice for editing

VOICE
DISPLAY

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

Select the Voice you want to edit from
the Voice Menu.
For example, if you want to edit Accordion 1, select
[Accordion 1] in the Voice Menu of the [ORGAN]
button in any Voice section.
UPPER KEYBOARD VOICE 1

BRILLIANCE

STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

While holding down…

VOLUME

BRILLIANT

MAX

MELLOW

MIN

UPPER KEYBOARD VOICE 1

BRILLIANCE

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

MAX

MELLOW

MIN

9
Voice Edit

STRINGS

VOLUME

BRILLIANT

Press the Voice button.

Mute all other Voice sections except for the targeted
Voice section.

While holding down the [VOICE EDIT]
button, press the Voice button
corresponding to the Voice you wish to
edit.

After you have selected the Voice button, the AWM
Page (first page of the Voice Edit display) will appear
if the selected Voice is an AWM Voice. If you have
selected a VA Voice, the VA Page will appear.

If you press [VOICE EDIT] without selecting a
Voice, the following display will prompt you to
complete the step. While this display appears, press
the desired Voice button.

If you release the [VOICE EDIT] button before
pressing a Voice button, the Voice Edit function will
not be called up, and the normal Voice Display will
appear.

ELS-02/ELS-02C Owner’s Manual

139

Editing a Voice

4 EQ HIGH FREQ./EQ HIGH GAIN

Editing an AWM Voice
You can edit an AWM Voice on the AWM Page and
LAYER Page in the Voice Edit display. In the AWM Page,
the tonal balance of the entire Voice can be corrected by
some EQ parameters. In the LAYER Page, you can make
detailed edits to each Element.

AWM Page

EQ (Equalizer)

Sets the frequency and gain (level) of the high frequency
band. The EQ HIGH FREQ. slider sets the desired
frequency band over a range of 500 Hz – 16.0 kHz. The
EQ HIGH GAIN slider sets the level for the frequency
band (specified by the EQ HIGH FREQ. slider) over a
range of -12 dB – +12 dB.

An equalizer is usually used to correct the sound
output from amps or speakers to match the special
acoustic character of the room. The sound is divided
into several frequency bands, then by raising or
lowering the level for each band, the correction is
made. This Electone has a two-band (high and low)
digital equalizer that lets you adjust the overall sound
according to the type of music you play — classical
music being more refined and soft, pop music more
crisp, and rock music more dynamic.

1 Element On/Off switches
The [AWM1-4] and [AWM5-8] buttons enable you to
alternate the pages between AWM 1 – 4 and AWM 5 – 8.
The [AWM1] – [AWM8] buttons indicate the Elements
which make up the selected Voice, and the [VA] button
indicates the VA tone generator (the VA button is grayed
out when you are editing an AWM Voice). You can mute
any of the Elements by simply pressing the corresponding
button. Pressing the button again cancels the mute.

LAYER Page

1
3

2 VOICE/ELEMENT
Indicates the Voice/Element currently being edited. In the
example screen above, Element 1 of Accordion 1 is
assigned to AWM1, Element 2 of Accordion 1 is assigned
to AWM2, and no Voice is assigned to AWM3 and
AWM4.
You can also call up another Element from another Voice
and replace the currently selected Element with it.
Pressing the VOICE or ELEMENT button in the display
calls up the Voice or Element menu, from which you can
select the desired Voice/ Element (usually Element 1). If
you change the Voice, the Element will automatically
change to the first Element of the Voice (usually Element
1).

3 EQ LOW FREQ./EQ LOW GAIN
Sets the frequency and gain (level) of the low frequency
band. The EQ LOW FREQ. slider sets the desired
frequency band over a range of 32 Hz – 2.0 kHz. The EQ
LOW GAIN slider sets the level for the frequency band
(specified by the EQ LOW FREQ. slider) over a range of
-12 dB – +12 dB.

140

ELS-02/ELS-02C Owner’s Manual

1 Element select buttons
Select the Element you wish to edit.

2 Element On/Off switches
The [AWM1] – [AWM8] buttons indicate the Elements
which make up the selected Voice, and the [VA] button
indicates the VA tone generator (the [VA] button is
grayed out when you are editing an AWM Voice). You
can mute any of the Elements by simply pressing the
corresponding button. Pressing the button again cancels
the mute. Muting all other Elements except for the one
you are editing lets you clearly hear that single Element
for ease in editing. Note that when some Elements are
muted, playing the keyboard in certain key areas or with
certain velocities may result in no sound.

3 Display switch buttons
The LAYER Page contains three pages. The
buttons are used to switch among them.

Editing a Voice

LAYER Page 1

These buttons switch the display.

3 ATTACK RATE
Determines how quickly the Element will reach its
maximum level after the key is played. Higher values
produce a faster attack.
Range: 0 – 127
Reference page
• Envelope Parameters (page 143)

4 RELEASE RATE

Determines how much time it takes for the level to reach
0 after the key is released.
Higher values make the time shorter.
Range: 1 – 127

1 LEVEL
5 CUTOFF FREQ.

Determines the output level of the Element.
Range: 0 – 127

Determines the cutoff frequency of the filter.
Range: 9600 – 24000 cent

2 NOTE LIMIT
Determines the lowest and highest notes in the range for
which the Element sounds.
The setting of the HIGH slider cannot be set lower than
that of the LOW slider. Some Elements are not affected by
this parameter.
Range: C-2 – G8

3 PAN

LAYER Page 2

Determines the amount of resonance (harmonic
emphasis) applied to the signal at the cutoff frequency.
Some Elements are not affected by this parameter.
Range: 16 – 140

Filter — Cutoff Frequency and Resonance
Filter modifies the tone by cutting the output of a
specific frequency portion of the sound. This
Electone is equipped with a low pass filter, which
passes only those signals below the cutoff frequency
and cuts signals above the cutoff frequency.

9
Voice Edit

Determines the position of the Element in the stereo
image.
Range: L64 – R63

6 RESONANCE

Cutoff Frequency
Level

These frequencies are passed by the filter.

Frequency

Level
Resonance

1 NOTE SHIFT
Determines the pitch settings in semitones.
Range: -64 – +63

2 TUNE FINE
Determines the fine tuning.
Range: -64 – +63

Frequency
Cutoff Frequency

You can produce a relatively brighter or darker sound
by setting the cutoff frequency.
Resonance is a parameter that boosts the level of the
signal in the area of the cutoff frequency. By
emphasizing the overtones in this area, this can
produce a distinctive “peaky” electronic tone.

ELS-02/ELS-02C Owner’s Manual

141

Editing a Voice

LAYER Page 3
LFO (Low Frequency Oscillator)
As its name suggests, the LFO creates waveforms of a
low frequency.
These waveforms can be used to vary the pitch, filter
or amplitude to create effects such as vibrato, wah
and tremolo.
The following five waveforms are available.

saw (sawtooth)

tri (triangle)

squ (square)

rnd (random)

1 LFO WAVE
Determines the LFO waveform used to vary the sound.
For details, see right column.

2 LFO SPEED
Determines the speed of the LFO waveform. Higher
values make the speed faster.
Range: 2 – 93

3 LFO PMD (Pitch Modulation Depth)
Determines the amount by which the LFO waveform
varies the pitch of the sound.
Higher values result in a greater amount of pitch change.
For the minimum setting, the pitch does not change.
Range: 0 – 400

4 LFO FMD (Frequency Modulation Depth)
Determines the amount by which the LFO waveform
varies the filter cutoff frequency.
Higher values result in a greater amount of frequency
change. For the minimum setting, the frequency does not
change.
Range: 0 – 4800 cent

5 LFO AMD (Amplitude Modulation Depth)
Determines the amount by which the LFO waveform
varies the amplitude of the sound. Higher values result in
a greater amount of amplitude change. For the minimum
setting, the amplitude does not change.
Range: 0 – 128
When playing a User Voice you have created using the
LFO parameters (above), set the Vibrato setting in the
Voice Condition display to “Preset,” not “User.” If Vibrato
is set to “User” and the Vibrato parameters (depth and/or
speed) are set fairly high, you may not be able to hear the
effect of the LFO.
Reference page
• Vibrato (page 44)

142

ELS-02/ELS-02C Owner’s Manual

sine

Editing a Voice

Editing a VA Voice (ELS-02C only)
You can edit a VA Voice in the VA Page of the Voice Edit
display. If you are using the ELS-02, the VA Page cannot
be selected.

6 EQ LOW
Determines the level (volume) of the low range
frequencies. Positive values boost or increase the level,
while negative values decrease or cut it.
Range: -64 – +63

7 EQ HIGH
VA Page

Determines the level (volume) of the high range
frequencies. Positive values boost or increase the level,
while negative values decrease or cut it.
Range: -64 – +63
Reference page
• EQ (Equalizer); (page 140)

Envelope Parameters
1

1 Element On/Off switches

Attack
Rate

Decay
Rate

Release
Rate

Level
(volume)

2
Level

Time

2 LEVEL
Determines the level of the VA sound.
Range: 0 – 127

Voice Edit

The [AWM1] – [AWM8] buttons indicate the Elements
which make up the selected Voice, and the [VA] button
indicates the VA tone generator. You can mute any of the
Elements by simply pressing the corresponding button.
Pressing the button again cancels the mute. AWM
buttons are grayed out when you are editing a VA Voice
since VA Voices do not contain Elements. However, you
can add AWM Elements to a VA sound in the AWM and
LAYER Pages if you want. See page 140.

The level envelope lets you control the transition in
volume from the moment a note is pressed on the
keyboard to the moment the sound stops. The
parameters 2 – 5 above are envelope-related
parameters.

Pressing the key

Releasing the key

3 ATTACK RATE
Determines how quickly the sound will reach its
maximum level after the key is played.
Lower values produce a slower attack.
Range: -64 – +63

4 DECAY RATE
Determines how much time it takes to reach its second
level from the first (maximum) level.
Range: -64 – +63

5 RELEASE RATE
Determines how much time it takes for the level to reach
0 after the key is released.
Positive value makes the time shorter and negative value
makes it longer.
Range: -64 – +63

ELS-02/ELS-02C Owner’s Manual

143

Saving the Edited Voice

Saving the Edited Voice
Edited AWM Voices can be saved as User Voices (up to
80), and edited VA Voices can be saved as VA Custom
Voices (up to six).

Press the [SAVE] button at the top right
of the display to call up the SAVE Page.
When saving User Voices (AWM)

Press the [SAVE] button to save the
Voice, or press [CANCEL] to abort the
operation.

NOTICE
This operation automatically erases any Voice that had
been previously saved to the selected User Voice
number or VA Custom Voice number. Be careful not to
erase any important data. Always save your important
data in advance to a USB flash drive using the MDR
function.

After saving the Voice, be sure to quit the Voice Edit
function (page 145) before turning the power off.
Turning off the Electone without quitting Voice Edit
erases the User Voice you have edited.

When saving VA Custom Voices (VA)

Select the User Voice number or VA
Custom Voice number you wish to save
to.
The message appears to prompt confirmation of the
operation. (Saving a new Voice automatically erases
the Voice previously stored to the selected User
number.)

(If necessary) Press the [RENAME]
button to give a name to your original
Voice.
The method for editing the name is the same as the
one for the Song name in the MDR section. (See
page 116 for more information.) Up to sixteen
characters can be entered.

144

ELS-02/ELS-02C Owner’s Manual

Quitting Voice Edit

Recalling an Edited Voice

You can quit the Voice Edit function from any of its
display pages.

Once your original AWM Voice has been saved, it can be
selected from the User button in each Voice section. Refer
to chapter 2, “Selecting Voices from the User buttons”
(page 28).

Press the [VOICE EDIT] button on the
panel.
If your original Voice has already been saved, the
Voice Edit function quits automatically. If the edited
Voice has not been saved, a message appears
prompting confirmation of the operation.

Select [EXIT] to quit the Voice Edit
function, or [CANCEL] to about the
operation and return to the previous
display.

UPPER KEYBOARD VOICE 1
STRINGS

BRASS

WOODWIND

TUTTI

PAD

SYNTH

PIANO

ORGAN

PERCUSSION

GUITAR

CHOIR

WORLD

When quitting Voice Edit, the square at the top left of the
display turns light blue for a few seconds, indicating
that the Voice you have created is currently being saved.
Do not turn the power off while the Voice is being saved.

VOLUME

BRILLIANT

MAX

MELLOW

MIN

Once your original VA Voice has been saved, it can be
selected from the [VA CUSTOM] button in LEAD
VOICE 2. Refer to chapter 2, “Selecting Voices with the
Voice buttons” (page 25).
LEAD VOICE 2

NOTICE

BRILLIANCE

ACOUSTIC

VIRTUAL

ELECTRONIC

CUSTOM

BRILLIANCE

VOLUME

BRILLIANT

MAX

MELLOW

MIN

SOLO
(KNEE)

9
Voice Edit

ELS-02/ELS-02C Owner’s Manual

145

10 Rhythm Program
The Electone includes powerful rhythm programming functions: Rhythm Pattern Program and Rhythm
Sequence Program. Rhythm Pattern Program allows you to record your own original rhythms and save them
as user rhythms. Rhythm Sequence Program lets you connect the existing rhythms or your original rhythms to
create complete rhythm tracks, which you can automatically play back during your performance. Moreover,
Rhythm Sequence Program includes an automatic Registration Shift feature — called Registration Sequence.

Outline of the Rhythm
Programming Operation
Rhythm Pattern Program (pages 146 to
162)
You can create your original rhythm patterns by
entering percussion sounds or editing preset
rhythm patterns.

Rhythm Pattern Program
Rhythm Pattern Program lets you use any of the different
instrument sounds (drum and percussion) assigned to
each key on the Upper and Lower keyboards in creating
your own rhythms. Up to 48 of your original rhythms can
be saved as User Rhythms.

Entering the Rhythm Pattern
Program

Entering percussion sounds and/or editing them

Creating/editing the accompaniment backing patterns
played via the Lower Keyboard

Making effect settings and detailed settings for each
percussion Voice (Pan, Tune, and so on)

Saving your rhythm patterns as User rhythms

There are two ways to program a User pattern: copying a
preset rhythm that is similar to the rhythm you want to
create, or creating your own rhythm from scratch.

To copy a preset rhythm:
Copying a preset rhythm lets you make changes to an
existing rhythm, saving you time if you want to program
a rhythm that is similar to an existing preset pattern.

1
Rhythm Sequence Program (pages 172
to 176)
You can connect any of the rhythms together to
make complete rhythm compositions. Moreover,
you can also program Registration Shift events at
any point in the composition so that the
Registration Memory settings automatically change
as the Rhythm Sequence plays back.
Selecting the destination of the sequence

Select the rhythm you want to copy
from the Rhythm Menu.
While holding down the [PATTERN]
button in the panel (the display prompts
you to select a rhythm), select the
Rhythm button that contains the preset
rhythm to be copied to the Rhythm
Pattern Program.
NOTE
• Pressing the [PATTERN] button while the rhythm is running
automatically stops the rhythm.

Entering a rhythm pattern one by one

Programming the Registration Sequence

146

ELS-02/ELS-02C Owner’s Manual

• Rhythms with names ending with “+” cannot be edited
and used with the Assemble function (page 149).

Rhythm Pattern Program

To create your own rhythm from
scratch:

DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

Press the [PATTERN] button and release it without
selecting a Rhythm button.
A blank pattern is loaded to the Rhythm Pattern
Program.

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

A Rhythm consists of 15 sections: Intro 1 – 3, Main A
– D, Fill In A – D, Ending 1 – 3, and Break.
In Rhythm Pattern Program, you can enter or edit
percussion notes one by one, or assemble each part
from other different rhythms to create your own new
User Rhythm.

Case 1: Creating your own rhythm by
changing a preset rhythm
Preset Rhythm
Fill In A

Intro 1

Main A

Ending 1
Break

2
3
RHYTHM

VOLUME
MAX

SEQ.

MARCH

WALTZ

SWING&
JAZZ

POPS

R&B

LATIN

WORLD
MUSIC

BALLAD

ROCK

DANCE

Changing Intro 1
to Intro 1'

Fill In A

Intro 1'

Main A

Deleting unnecessary Sections
Ending 1
2

Break

10
Rhythm Program

User Rhythm

MIN

When you create a Rhythm pattern based on Preset
Rhythm data or already created User Rhythm data,
created data will be stored together with the unedited
other Sections. Even if you edit only Main A and
Main B, all other Sections will also be stored as User
Rhythm data. Because of this, the remaining memory
capacity (page 162) may decrease faster than
expected. To save on memory capacity, you should
delete unnecessary Sections which may not be used
for your performance by pressing the [ALL] button
on the CLEAR PART window (page 150).

Save as
a User Rhythm

3
All Rhythm sections, including any which have not
been edited, are saved as one User Rhythm.

ELS-02/ELS-02C Owner’s Manual

147

Rhythm Pattern Program

Case 2: Creating your own rhythm by
assembling parts from other different
rhythms
Preset Rhythm
Fill In A

Intro 1

Main A

Ending 1
2

Break

Basic settings for the rhythm
pattern
In the SETTING Page of the display, set the conditions of
the rhythm, such as time signature, measure length, and
so on. You can also customize the part settings in this
SETTING Page — deleting any part or copying a part
from another rhythm to the currently selected rhythm.

Preset Rhythm
Fill In A'

Intro 1'

Main A'

Ending 1'
2'

Press the [SETTING] button in the
display to call up the SETTING Page.

Break'

Save as
a User Rhythm

Assemble some
sections or parts

User Rhythm
Intro 1

Main A

Fill in A

Ending 1
2

Break'

Determines the time signature used for
the rhythm.
You can select the time signature with the BEAT
buttons.

Case 3: Creating your own rhythm from
scratch
Blank Rhythm
Fill In A

Intro 1

Main A

Ending 1
Break

2
3

Save as
a User Rhythm

Entering percussion sounds
into each section

User Rhythm
Fill In A

Intro 1

Main A

Ending 1
2

Break

3
These are blank sections (no percussion sounds); if you
press the ENDING [2] or [3] button, no sound is played.

148

ELS-02/ELS-02C Owner’s Manual

If you start the Rhythm Pattern Program from a
preset rhythm, pressing a BEAT button that is not
the same as the currently selected rhythm calls up
the following message.

Rhythm Pattern Program

Selecting [CLEAR] deletes all data in the rhythm
and changes the time signature.
Select [CANCEL] to abort the operation.

(If necessary) Set the Metronome, Part
Assemble, and Part Clear parameters.

Select a section to which you want to
enter or edit the rhythm pattern.
Pressing the SECTION button on the display calls
up the Section Select pop-up menu. After selecting
the desired section, the pop-up menu automatically
closes.

2
3
1

1 METRONOME
Turns the metronome click on or off. When set to ON,
the metronome sounds on each beat of the measure (for
example, three times per measure in 3/4 time) to serve as
a rhythmic guide when programming patterns. Set to On
here with Real Time Write.
Reference pages
• Step Write and Real Time Write (page 150)
• Entering percussion sounds to a rhythm pattern — Real Time
Write (page 151)

NOTE
Pressing the VOLUME buttons for Rhythm also changes the
volume of the metronome.

2 ASSEMBLE

Select copy source (Rhythm, Section, and Part)

10
Rhythm Program

You can play the selected section by pressing the
Rhythm [START] button on the panel. You can also
change the section while the rhythm is playing. For
details on muting the accompaniment part, refer to
page 158.

Copies parts from another rhythm to the currently
selected rhythm. You can assemble various sections from
multiple rhythms to create your original rhythm.
Pressing the [ASSEMBLE] button calls up the following
display.

Sets the measure length of the rhythm
pattern.
Pressing the MEASURE button on the display calls
up the Measure Select popup menu. Select the
desired number of measures in the pop-up menu. If
you select Break or Fill In as the section, the measure
value cannot be changed.

Select the part for the
copy destination

Press here to execute
the copy

Select the copy source: Rhythm, Section and Part. Then
select the destination. You can copy only one selected
part, or all parts of a rhythm.
After setting the source and destination, press
[EXECUTE]. Copy is executed and returning to the
previous display.

ELS-02/ELS-02C Owner’s Manual

149

Rhythm Pattern Program

You can also select a rhythm pattern currently being
created as the COPY FROM RHYTHM.
To create a MAIN B section based on MAIN A, create the
MAIN A rhythm in the INPUT page, copy it to MAIN B,
then edit the MAIN B rhythm as desired.
To select the rhythm currently being created, select
“Current Rhythm” on the 5th page of the “USER” category.

When selecting the desired part, a display prompting
confirmation of the operation appears. Select [CLEAR] to
execute the operation, or select [CANCEL] to abort the
operation.
NOTE
If you select BASS here, the bass phrase in the A.B.C. will be
cleared.

Deleting the current Section
Pressing the [ALL] button on the CLEAR PART window
will delete all data of the current Section. To conserve
remaining memory capacity (page 162), delete unnecessary
Sections which may not be used for your performance.

Step Write and Real Time Write
There are two different methods you can use to program
rhythms: Step Write and Real Time Write.
Step Write allows you to enter percussion sounds as
individual note values. As a method, it is very similar to
writing down the notes on a sheet of music paper; each
note is entered one at a time, and though you can hear each
individual note entered, you cannot actually hear the
pattern playing as you create it. Step Write is good for
precision and for entering percussion sounds whose note
placement and rhythmic value has been determined, such
as a bass drum that plays every beat in a measure.

3 CLEAR PART
Clears a specific part or parts from the currently selected
rhythm. Pressing this button calls up the following
display.

Select the part you want to delete from the displayed
parts. You cannot select a part that contains no data (the
button is grayed out). If you select [ALL] here, the
percussion and all accompaniment parts are cleared.
Reference page
• Accompaniment (page 65)

150

ELS-02/ELS-02C Owner’s Manual

Real Time Write on the other hand, is similar to using a
multi-track tape recorder; you can hear previously recorded
parts of the pattern as you record new parts on top. Real
Time Write is best for capturing the “feel” of a rhythm,
because it allows you to actually play the pattern as you are
creating it.
Each method has its own advantages and uses. Which
method you use depends partly on the type of rhythm you
intend to create and partly on your own personal
preference.
You can switch between the two methods in editing to
create a single rhythm by the use of both methods. This
would come handy, for example, in programming the basic
beats of a rhythm with Step Write, then using Real Time
Write to add percussion accents and embellishments.
Which mode of the operation is selected depends on the
play status of the rhythm. If the rhythm is stopped, Step
Write is automatically selected. If the rhythm is playing,
Real Time Write is selected. See the instructions page 151
for Step Write, and page 155 for Real Time Write.

Rhythm Pattern Program

Entering percussion sounds to a
rhythm pattern — Step Write
You can enter percussion sounds in the INPUT Page of
the display. Before entering percussion sounds, turn off
the Upper and Lower keyboard Voices by setting each
Voice’s volume to MIN.
NOTE
The volume of the percussion and accompaniment sound
during use of Rhythm Pattern Program can be controlled with
the VOLUME button of the RHYTHM section. When you quit
Rhythm Pattern Program, the VOLUME of the RHYTHM section
will return to the previous selected level.

1
2

Drum kit

Press the [INPUT] button at the top of
the display to call up the INPUT Page.
Select the part, MAIN DRUM or ADD
DRUM, to which you want to enter the
percussion.
In general, main (or basic) drum/percussion
instruments (such as Bass Drum, Snare Drum, and
so on) are entered in Main Drum part and others
(such as Tambourine, Triangle) are entered in Add
Drum part.

You can select only one kit for each part (Main
Drum or Add Drum). When you want to create a
rhythm pattern including two different drum kits,
select one kit for Main Drum and another for Add
Drum.

Select the desired Drum Kit.
You can select a kit from the two categories, Drum
Kit and SFX Kit. For details on each kit, see
page 164. Pressing the desired kit in the Kit list will
close the list, and then call up the selected kit to the
Upper and Lower keyboards.

Select the percussion sound you wish
to enter by pressing the key on the
Upper or Lower keyboard that
corresponds to the sound.

10
Rhythm Program

SFX kit

The selected instrument’s name appears on the
display.

Selected key

Instrument name

ELS-02/ELS-02C Owner’s Manual

151

Rhythm Pattern Program

Set the appropriate Quantize value.
For details on Quantize, refer to page 155.
NOTE
The Quantize setting can be changed in the middle of
Step Write.

2 ACCENT buttons
Records the instrument and determines its volume or
Accent level. Press one of the ACCENT buttons you wish
to set (“
” is softer and “
” is louder; “REST” is no
sound). The instrument is automatically inserted at the
Accent level to the selected position in the pattern.
Selection of an Accent level automatically advances the
rhythm clock by one step, according to the current
Quantize resolution value.

3 QUANTIZE [L] [R] controls
Each press of the buttons advances or reverses the rhythm
clock by one step. The size of a single step is determined
by the Quantize value.

Set the Gate Time. (This is optional, and
only necessary when you want to enter
a sustaining sound, such as a whistle.)
For a list of instruments that require a Gate Time
setting, refer to the Percussion Kit List on page 164.
For details on Gate Time, refer to page 158.

Use the ACCENT buttons to enter the
sound to the selected point. Press each
ACCENT button to actually enter the
percussion sounds.
You can change the rhythm clock to which the
percussion sound is entered by pressing the
QUANTIZE [L] [R] buttons.

Displays the current position in the pattern according to
measure, beat, and number of clicks.
A click is the smallest division of a pattern, and one beat
is made up of 480 clicks.
The rhythm clock advances up to the measures set in the
SETTING Page and loops back to the beginning of the
rhythm (01:01:000).
Reference page
• Basic settings for the rhythm pattern (page 148)

ELS-02/ELS-02C Owner’s Manual

You can change the accent level, position, or gate time of
the entered sound, or delete the entered sound.

To change the accent level of an entered
note:
Select the desired note for changing the
accent level.

1 Rhythm Clock box

152

Repeat steps 4 through 7 above to layer
each instrument and complete your own
rhythm.

Editing entered percussion notes

1 NEXT INSTRUMENT
Selects the entered instruments one by one, from left key
to right.

Rhythm Pattern Program

2 NOTE [L] [R] controls

To move an entered note:

Selects the previous/next position’s note of the currently
selected instrument. In the notes below for example, you
can select notes 1, 3 and 4 one by one. Rests (2 and
5) are ignored.

1
2

Select the note you want to move (as in
step 1 on page 152).
Press the Rhythm Clock box to enable
the box.

3 QUANTIZE [L] [R] controls
Advances or reverses the rhythm clock by one step. The
size of a single step is determined by the Quantize value.

Change the accent level by using the
ACCENT buttons or Accent field.
The Accent field allows for finer changes.
1

Turn the Data Control dial to change the
position by one clock.

To change the length of an entered note:
The length of sustaining sounds such as Snare Roll and
Whistle can be changed by adjusting the Gate Time. See
page 158 for more information.

1 Accent field
Touch on the box to enable the Accent field.
Turning the Data Control dial changes the accent level
over a range of 0 – 127.
The minimum setting results in no sound.

2 ACCENT buttons

To erase an entered note:

1
2

Select the note you want to erase (as in
step 1 on page 152).

Rhythm Program

Press the [REST] button in the ACCENT
section of the display.
The selected note is deleted and replaced with a rest.

Determines the coarse accent level. Eight accent levels
(from “
” to “
”) are available.
Press the desired Accent button to change the currently
selected note to the selected level.

ELS-02/ELS-02C Owner’s Manual

153

Rhythm Pattern Program

You can also erase all notes of a single instrument, or all
notes entered.

To erase all instruments:

The following display appears, prompting
confirmation of the operation.

To erase one instrument:

Press [CLEAR] in the display.

Select the key to which the instrument
that you want to erase is assigned.
The key name you have selected and its instrument
name are displayed.

Selected key

Instrument name

Press [CLEAR] in the display.
The following display appears, prompting
confirmation of the operation.

Select [CLEAR ALL] to erase all
instruments.
All instruments are instantly erased.

When you want to replace the instrument you have
already entered with another instrument, it’s not
necessary to delete and re-enter. You can quickly replace
the sound with the following procedure.

To replace the instrument:

Before the operation, stop the rhythm.

Select [CLEAR] to erase the selected
instrument.

A bell sound indicates that the instrument has been
erased.

Select the key to which the instrument
you want to replace is assigned.
The key name you have selected and its instrument
name are displayed.

The following method can also be used to erase one
instrument.
Selected key

While holding down the [CLEAR]
button, press the key on the keyboard
corresponding to the instrument you
wish to erase.
A bell sound indicates that the instrument has been
erased.

154

ELS-02/ELS-02C Owner’s Manual

Instrument name

Simultaneously hold down the
[CHANGE] button in the display and
press the key on the Upper or Lower
keyboard that corresponds to the
instrument you want to use.
The instrument is instantly erased and replaced with
the newly selected one.

Rhythm Pattern Program

About Quantize
The Quantize function is a process of rounding off timing
or duration values, so that each note plays with precise
timing. You can select nine types of Quantize value.

Entering percussion sounds to a
rhythm pattern — Real Time Write
While you listen to the entered rhythm or metronome
click, play the Upper/Lower keyboards to enter the
desired percussion sounds.

With this button, change the displayed Quantize buttons

Select the desired part to which the
percussion sounds are entered, and the
desired drum kit, by following steps 1 –
3 on page 151.
Set the appropriate Quantize value.
The positions at which the sounds are input will be
corrected according to the predetermined Quantize
value in the Real Time Write operation.

With Step Write
This allows you to automatically correct the length
(duration) and timing of each note you enter.
Steps Depending on the Quantize Values
1
2

240

120

60
320

6
160

7
8
40

9
Clock

120

240

360

Press the rhythm [START] button in the
panel.
The rhythm (or Metronome) starts playing, enabling
the Real Time Write operation.

480
(1 beat)

Setting Quantize to FREE (5) results in the finest, least
amount of quantization (1/480 beat).

10
Rhythm Program

With Real Time Write
This allows you to automatically correct the timing of the
notes you play, according to the specified Quantize
resolution. No correction occurs when you select FREE.
Generally, you should set Quantize to be the same as the
shortest note you intend to play.
Original data (you play)

Quarter note
length

4
After applying a “ ” quantize value to the original data

The rhythm (or Metronome) starts
playing, enabling the Real Time Write
operation.
If you have started the Rhythm Pattern Program by
copying a preset rhythm, you can listen to the
selected rhythm as you play the sound. If you have
started from scratch, set the Metronome to “on” in
the SETTING Page and listen to the metronome
click. The pattern will automatically repeat (or

ELS-02/ELS-02C Owner’s Manual

155

Rhythm Pattern Program

“loop”) for a certain number of measures as set in
the SETTING Page.

Reference page
• Metronome (page 149)

Using the COPY FROM [RHYTHM] and
[SECTION] buttons, select the rhythm
and the section which has the
accompaniment you wish to use.
Reference page

Repeat steps 2 through 4 above to layer
each instrument and complete your own
rhythm.

• Basic settings for the rhythm pattern (page 148)

You can erase an instrument while the rhythm is playing
back.

To erase an instrument/key assignment:
While holding down the [CLEAR] button, press the key
on the keyboard corresponding to the instrument you
wish to erase. All instances of the selected instrument will
be erased from the pattern.
When you want to erase all instruments, or edit entered
percussion notes, you need to stop the rhythm before
editing. See page 152, “Editing entered percussion notes.”

Creating backing patterns
(Rhythmic Chord function)
The Rhythm Pattern Program allows you to use one of
the Electone’s Accompaniment patterns with your
original rhythm. You can select and save the
Accompaniment pattern that best matches the rhythm
that you have created. Moreover, Rhythm Pattern
Program features a Rhythmic Chord function that lets
you add your own backing patterns to the rhythms you
create.

To select an appropriate
Accompaniment pattern for your newly
created rhythm:

1
2

Press the [SETTING] button at the top of
the display to call up the SETTING Page.
Press the [ASSEMBLE] button.
A pop-up menu appears, letting you select the copy
source and destination parts.

4
5

ELS-02/ELS-02C Owner’s Manual

Using the COPY TO [PART] button,
select the desired accompaniment part
(CHORD 1 or CHORD 2) to be used for
the Rhythmic Chord pattern.
Press the [EXECUTE] button to execute
the copy.

The desired accompaniment part (Rhythmic Chord
pattern) has been copied.

To create your own backing patterns
with the Rhythmic Chord function:
The Rhythmic Chord pattern can be entered by the same
methods as the rhythm: Step Write and/or Real Time
Write.

1
156

Using the COPY FROM [PART] button,
select the accompaniment part you
want to copy.

Press the [INPUT] button at the top of
the display to call up the INPUT Page.

Rhythm Pattern Program

Voices can also be changed even after entering the
Rhythmic Chord pattern.
You can select only one Voice for one part (Chord 1
or Chord 2). When you want to create a Rhythmic
Chord pattern including two different Voices, select
one Voice for Chord 1 and another for Chord 2.

Select the part, CHORD 1 or CHORD 2,
which you want to create for the
Rhythmic Chord pattern.

Set the appropriate Quantize value.
For details on the Quantize function, refer to
page 155.

You can adjust the Gate Time setting by using the
GATE TIME
buttons in the display, or
the Data Control dial. Using the buttons in the
display makes coarse changes in the value. Using the
Data Control dial makes fine changes.

If the part you have selected contains a preset
accompaniment pattern, a message appears
prompting you to confirm whether you want to clear
the existing data or not. To create your own
Rhythmic Chord pattern, select [CLEAR].

Set the Gate Time.

Select the desired Voice.
Pressing the button showing the Voice name calls up
the relevant Voice Menu.
Select the desired Voice category with the
instrument icon buttons, then select the desired
Voice from the Voice Menu. The selected Voice is
called up for both the Upper and Lower keyboards.
NOTE
The Voice menu that appears here is not the same as the
one for the Voice Sections.

10
Rhythm Program

Gate time determines the actual length of time a note
sounds. For example, a quarter note is sometimes played as
tenuto (long length) and sometimes played as staccato
(short length).
Since 1 beat is made up of 480 clocks, a quarter note played
tenuto may have a gate time between 450 – 470, and a
staccato quarter note may be about 240.

Enter the Rhythmic Chord pattern.
The methods for entering the Rhythmic Chord
pattern are the same as those for entering the
rhythm pattern. Any key you press sounds a C major
triad chord (C, E, and G). For information on Step
Write, see page 152; for information on Real Time
Write, see page 155.

You can also edit the entered Rhythmic Chord pattern
using the same method as in “Editing entered percussion
notes” (page 152). To change the gate time of the notes of
the Rhythmic Chord pattern, follow the instructions (see
page 158).

ELS-02/ELS-02C Owner’s Manual

157

Rhythm Pattern Program

To change the Gate Time:

1
2

Select the desired part for which you
wish to change the Voice.
The Voice menu appears.

Select the note for which you want to
change the gate time (see step 1 on
page 152).
Press the Gate Time box to enable the
box.

Turn the Data Control dial to change the
Gate Time.

Changing the Voices for
Accompaniment parts

Select the desired Voice, and the Voice
menu automatically closes.
NOTE

In Rhythm Pattern Program, you can create your original
drum patterns using Main Drum and Add Drum, and
original backing patterns using Chord 1 and Chord 2.
Moreover, you can change the Voices for all
accompaniment parts, including Pad, Phrase 1 and
Phrase 2.
Voices can be changed in the VOICE/EFFECT Page.

1
2

Press the [VOICE/EFFECT] button at the
top of the display to call up the VOICE/
EFFECT Page.
Press the [VOICE] button in the display.
The following display will appear.

158

ELS-02/ELS-02C Owner’s Manual

The Voice menu that appears here is not the same as the
one for the Voice Sections.

After selecting the desired Voice, customize the
accompaniment to your personal preference by adjusting
the volume and pan, and setting the desired effects (see
page 159).

Rhythm Pattern Program

REVERB display

Adjusting volume and panning
Volume and Pan are set in the VOICE/EFFECT Page.

VOLUME display

1 ON/OFF

Determines the amount of reverb applied to each
accompaniment part.
Range: 0 – 127

CHORUS display

Determines the on/off status of each accompaniment
part. When this is set to OFF, the part is muted.

2 Volume sliders

Determines the volume of each accompaniment part.
Range: 0 – 127
2

PAN display
1 CHORUS TYPE

10
Rhythm Program

Determines the type of the chorus effect. Pressing the
CHORUS TYPE button calls up the chorus type list.

Determines the position of each accompaniment part in
the stereo image.
Range: L64 – R63

Effect settings
You can set Reverb, Chorus, and Variation effects as
desired for your original rhythm.
Reverb adds a warm ambience to the sound, simulating
the complex reflections of actual performance spaces,
such as a concert hall or a small club. Chorus provides a
wide variety of sound transformations and
enhancements. Variation includes many kinds of special
effects for changing the sound, both subtly and radically.
These effects are set in the VOICE/EFFECT Page.

Select the desired chorus type, and the list automatically
closes.
ELS-02/ELS-02C Owner’s Manual

159

Rhythm Pattern Program

2 Chorus sliders
Determines the amount of chorus effect applied to each
accompaniment part.
Range: 0 – 127

VARIATION display

1 VARIATION (Variation Effect Category)
Selects the effect category of the variation effect. Pressing
the VARIATION button calls up the effect category list.
Reference page
• Effect List (page 54)

Select the desired type, and the list automatically closes.

3 Variation sliders
Determines the amount of Variation effect applied to
each accompaniment part.
Range: 0 – 127

Detailed settings for each
percussion instrument
You can independently adjust the settings of pan, pitch,
reverb and volume for each instrument.

1
2
Select the desired effect category, and the list
automatically closes.
After changing the category, the variation type below
automatically changes corresponding to the selected
category.

2 TYPE (Variation Type)
Determines the type of the variation effect. Pressing the
TYPE button calls up the effect type list.

160

ELS-02/ELS-02C Owner’s Manual

Press the [DRUM SETUP] button at the
top of the display to call up the DRUM
SETUP Page.
Select the desired part, Main Drum or
Add Drum.

Rhythm Pattern Program

5 PITCH COARSE

Press the appropriate key (the key to
which the instrument to be changed is
assigned).

Determines the pitch of the currently selected
instrument, adjustable in semitone (100-cent) steps.
Range: -64 – +63

The selected instrument’s name is shown on the
display and you can change its settings.

6 PITCH FINE
Determines the pitch of the currently selected
instrument, adjustable in 1-cent steps, allowing more
detailed tuning of the instrument than in PITCH
COARSE (5) above.
Range: -64 – +63

Saving rhythm patterns

You can save your newly created rhythm pattern as a User
Rhythm, up to a maximum of 48 patterns.

Adjust the parameters: Pan, Volume,
Reverb and Pitch.

If necessary, confirm the contents of the
rhythm you want to save.

1
2

Confirming rhythm patterns before saving
The rhythm pattern you have created will be saved with 15
sections collectively into one rhythm. Before saving, we
recommend that you confirm the contents of each section.
Example: When saving the Main A and Main B sections
you have created into one user rhythm

Indicates the currently selected kit. Pressing this button
calls up the Percussion Kit list, letting you select the
desired kit. When you change the kit, the instruments
you have already entered are replaced with the
instruments of the newly selected kit.
Reference page
• Percussion Kit List (page 164)

2 PAN
Determines the position of the currently selected
instrument in the stereo image.
Range: L63 – R63

10
Rhythm Program

1 Percussion Kit Name

First select “Main A” by using the [SECTION] button on
the SETTING Page, then press the [START] button on the
panel. This lets you hear the Main A pattern you have
created.
Confirm that the rhythm pattern is what you want to save
as Main A. Next, select “Main B” by using the [SECTION]
button, then play it back and confirm that this is what you
want to save as Main B.
If the Main A and/or Main B patterns contain undesired
data or no data, create the desired data by using the
Assemble function (page 149).
After confirming the desired section (Main A and Main B
here), we recommend that you confirm that all other
sections contain no data. If unnecessary data is contained
in some sections which you don’t want to save, delete that
unnecessary data. This can reduce the data size of the user
rhythm.

3 VOLUME
Determines the volume of the currently selected
instrument.
Range: 0 – 127

4 REVERB
Determines the amount of reverb applied to the currently
selected instrument.
Range: 0 – 127

Press the [SAVE] button at the top right
of the display to call up the SAVE Page.
If the rhythm is playing, it will automatically be
stopped.

ELS-02/ELS-02C Owner’s Manual

161

Rhythm Pattern Program

Select the User Rhythm number to
which you wish to save.
The following display appears, prompting
confirmation of the operation.

After saving the Rhythm, be sure to quit Rhythm Pattern
Program before turning the power off. Turning off the
Electone without quitting Rhythm Pattern Program
erases the User Rhythm you have created.

Quitting the Rhythm Pattern
Program
You can quit the Rhythm Pattern Program from any of its
display pages.

Press the [PATTERN] button.
If a rhythm is playing, it will automatically be
stopped.
If you leave Rhythm Pattern Program without
having edited any patterns, this simply quits the
Rhythm Pattern Program.
If you have not saved the edited pattern, a message
appears, prompting confirmation of the operation.

Press the [SAVE] button to save the
pattern, or press [CANCEL] to abort the
operation.

Checking the Remaining Memory
Capacity
Remaining Memory (amount of memory available for
storing rhythms) is shown on the display as a percentage.
Remaining Memory

If a “Data full” message appears when you press the [SAVE]
button, the pattern cannot be saved because of lack of
available memory space. If this occurs, check through all
fifteen sections for any unnecessary data. After erasing
some of the less necessary data, try to save the pattern
again.
To avoid this, you should periodically check the amount of
remaining memory while you are creating your rhythm.
Reference pages
• Confirming rhythm patterns before saving (page 161)
• CLEAR PART (page 150)

162

ELS-02/ELS-02C Owner’s Manual

Select [EXIT] to leave Rhythm Pattern
Program, or [CANCEL] to abort the
operation and return to the previous
display.
NOTICE
When you leave the Rhythm Pattern Program, the
square at the top left in the display turns light blue for a
few seconds, indicating that data is currently being
saved. Do not turn the power off while the data is being
saved.

Rhythm Pattern Program

Recalling User rhythm patterns

The method for selecting a file is the same as that in
the MDR section. See page 108 for more
information.

The User rhythms you have created in the Rhythm
Pattern Program can be selected and played from the
User buttons in the panel Rhythm section. Refer to
Chapter 5, “Selecting Rhythms from the User buttons”
(page 60).
RHYTHM

Press the [SELECT] button to select the
desired pattern file.

VOLUME
MAX

SEQ.

MARCH

WALTZ

SWING&
JAZZ

POPS

R&B

LATIN

WORLD
MUSIC

BALLAD

ROCK

DANCE

2
MIN

User buttons
Select “USER” category here.

You can load rhythms from a USB flash drive and edit
and save them as User Rhythms. Data that can be loaded
includes not only that of the Electone, but also all Style
File Format files.

1
2
3

Insert the USB flash drive which
contains the desired pattern into the
[USB TO DEVICE] terminal.
Press the [PATTERN] button on the
panel.
Press [FILE] at the top right in the
display.
If you open the FILE Page while the rhythm is
playing, the rhythm will automatically be stopped.

Press the [LOAD] button to load the
pattern.

To edit the loaded pattern, go to the INPUT Page
(page 152), then save your created pattern(s) as a User
Rhythm (page 161).

10
Rhythm Program

Selecting rhythms from a USB
flash drive

About file types that can be loaded to the
Electone
This Electone is compatible with Style File
Format data.
The Style File Format (SFF) is Yamaha’s
original Style data format, which uses a
unique conversion system to provide high-quality
automatic accompaniment based on a wide range of chord
types. In this format, each rhythm pattern (called a “Style”)
is made up of fifteen sections (Intro 1 – 3, Main A – D, Fill
In A – D, Break, Ending 1 – 3) as rhythm pattern variations.
Each of these fifteen sections in turn has eight different
parts, made up of MIDI sequence data.
You can load any patterns (Styles) which have been created
by an SFF-compatible instrument.

ELS-02/ELS-02C Owner’s Manual

163

Rhythm Pattern Program

Percussion Kit list
Drum
ELKit 1

&ᅊ

'
'ᅊ
(
)

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ
(
)

)ᅊ

Lower Keyboard

*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ
)

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ
(
)

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ
(
)

)ᅊ

*
*ᅊ
$
%

Upper Keyboard

&
'

'ᅊ
(
)

*ᅊ

%
&

$ᅊ

Room Kit

Surdo Mute

Surdo Open

Noise Percussion

Maracas Low

Hi Q

Bass Drum March

Surdo Muff

Whip Slap

Analog BD Short

Surdo Rim

Scratch H

Synth Tom 3

Cuica High

Scratch L

Analog BD Long

Surdo Open

Finger Snap

Synth Tom 2

Cuica Middle

Click Noise

Synth Bass Drum

Tamborim Mute

Metronome Click

Synth Tom 1

Cuica Low

Metronome Bell

Bass Drum Attack

Tamborim Open

Seq Click L

Bass Drum Heavy

Pandeiro

Seq Click H

Tom 4

Bongo High

Brush Tap

Bass Drum Light

Conga Slide

Brush Swirl *

Tom 3

Bongo Low

Brush Slap

Orch Snare Drum

Conga Slap

Brush Tap Swirl *

Snare Drum Roll *

Conga Muff

Snare Roll *

Tom 2

Bongo Mute

Castanet

SD Brush Roll

Conga High

Snare Soft

Snare Soft 2

Snare Electro

Snare Soft

Tom 1

Bongo Slap

Sticks

SD Brush Shot 2

Conga Low

Kick Soft

Kick Tight L

Kick Soft

Open Rim Shot

Open Rim Shot H

Snare Pitched

Open Rim Shot

Tom Brush Shot 4
SD Brush Shot 1

Timbale 1 High

Kick Tight

Kick Wet

Kick Tight

SD Heavy

Timbale 1 Low

Kick

Kick Short

Kick Tight H

Kick

Side Stick

Side Stick Light

Stick Ambient

Side Stick

Snare

Snare Short

Snare Ambient

Snare Snappy

Hand Clap

Tom Brush Shot 3
Timbale 2 High

Tom Brush Shot 2
SD Accent 2

Timbale 2 Low

Snare Tight

Snare Tight H

Snare Tight 2

Snare Tight Snap

SD Accent 1

Timbale 3 High

Floor Tom L

Hybrid Tom 1

Tom Room 1

Tom Brush Shot 1

Wood Block High

Hi-Hat Closed

Hi-Hat Closed 2

Hi-Hat Closed

SD Reverb 2

Timbale 3 Low

Floor Tom H

Hybrid Tom 2

Tom Room 2

Snare Drum Rim 2

Wood Block Mid

Hi-Hat Pedal

Hi-Hat Pedal 2

Hi-Hat Pedal

SD Reverb 1

Timbale 4 High

Low Tom

Hybrid Tom 3

Tom Room 3

Snare Drum Rim 1

Wood Block Low

Hi-Hat Open

Hi-Hat Open 2

Hi-Hat Open

Synth Snare Drum

Timbale 4 Low

Mid Tom L

Hybrid Tom 4

Tom Room 4

Analog SD

Vibraslap

Mid Tom H

Hybrid Tom 5

Tom Room 5

Triangle Mute

Crash Cymbal 1

Tambourine

High Tom

Hybrid Tom 6

Tom Room 6

Triangle Open

Ride Cymbal 1

Castanet

Chinese Cymbal

Claves

Ride Cymbal Cup

Tambourine

Tambourine Light

Tambourine

Splash Cymbal

Cowbell

Crash Cymbal 2

Vibraslap

Cabasa
Finger Snap

Hand Claps

Ride Cymbal 2

Crash Cymbal 2

Wind Chime Down

Bongo H

Hi-Hat Closed

Agogo High

Bongo L

Crash Cymbal 1

Wind Chime Up

Conga H Mute

Hi-Hat Open

Agogo Low

Conga H Open

Crash Cym Mute

Bells

Conga L

Ride Cymbal 2

Cowbell 4

Timbale H

Hi-Hat Pedal 2

Shaker

Timbale L

Ride Cymbal 1

Cowbell 3

Agogo H

Hi-Hat Pedal 1

Guiro Short

Agogo L

Ride Cymbal Cup

Cowbell 2

Cabasa

Guiro Long

Maracas

Cym Brush Shot

Cowbell 1

Samba Whistle H *

Cymbal March

Taiko 2

Samba Whistle L *

Analog HH Closed

Ohdaiko 2

Guiro Short

Orch Cymbal Roll

Taiko 1

Guiro Long *

Analog HH Open

Ohdaiko 1

Claves

Orch Cymbal

Ohtsuzumi 2

Wood Block H

Orch Cymbal Mute

Ohtsuzumi 1

Wood Block L

Kakegoe 3

Cuica Mute

Kotsuzumi 4

Cuica Open

Kakegoe 2

Triangle Mute

Kotsuzumi 3

Triangle Open

Kakegoe 1

Shaker

Kotsuzumi 2

Jingle Bells

Kotsuzumi 1

Bell Tree

Tam-Tam

Hit Kit

Maracas High

)ᅊ

Standard Kit 2

Concert BD

$ᅊ

&ᅊ

Standard Kit 1

Scratch

Snare Drum Light

(

ELKit 2

&ᅊ

'
'ᅊ
(
)

)ᅊ

*
*: Indicates an instrument which requires the Gate Time setting.

164

ELS-02/ELS-02C Owner’s Manual

Rhythm Pattern Program

Drum
Rock Kit

&ᅊ

Electro Kit

Analog Kit

Dance Kit

Jazz Kit

Brush Kit

Surdo Mute

Kick Dance 1

Surdo Mute

Surdo Open

Kick Dance 2

Surdo Open

Hi Q

(

Whip Slap

)

Scratch H

Scratch Dance 1 *

Scratch H

Scratch L

Scratch Dance 2 *

Scratch L

Finger Snap

Click Noise

Metronome Click

Dance Perc 1

Metronome Click

Metronome Bell

Reverse Dance 1

Metronome Bell

Seq Click L

Dance Perc 2

Seq Click L

Seq Click H

Hi Q Dance 1

Seq Click H

Brush Tap

Snare Analog 3

Brush Tap

Brush Swirl *

Vinyl Noise *

Brush Swirl *

Brush Slap

Snare Analog 4

Brush Slap

Brush Slap *

(

Brush Tap Swirl *

Reverse Cymbal *

Brush Tap Swirl *

Brush Tap Swirl

)

Snare Roll *

Reverse Dance 2 *

Snare Roll *

Castanet

Hi Q 2

Castanet

Snare Noisy

Snare Snap Elec

Snare Noisy 4

Snare Techno

Snare Jazz H

Brush Slap 2

Sticks

Snare Dance 1

Sticks

Kick Soft

Kick 3

Kick Techno Q

Kick Soft

Open Rim Shot

Rim Gate

Open Rim Shot

Kick 2

Kick Gate

Kick Anlg Short

Kick Techno L

Kick Tight

Kick Gate

Kick Gate Heavy

Kick Analog

Kick Techno

Kick Jazz

Side Stick

Side Stick Anlg

Side Stick Light

Snare Rock

Snare Noisy 2

Snare Analog

Snare Clap

Snare Jazz L

Brush Slap 3

Hand Clap

Dance Clap

Hand Clap

(

Snare Rock Tight

Snare Noisy 3

Snare Analog 2

Snare Dry

Snare Jazz M

Brush Tap 2

)

Tom Rock 1

Tom Electro 1

Tom Analog 1

Tom Dance 1

Floor Tom L

Tom Brush 1

Hi-Hat Closed

Hat Close Analog

Hi-Hat Closed 3

Hi-Hat Closed

Tom Rock 2

Tom Electro 2

Tom Analog 2

Tom Dance 2

Floor Tom H

Tom Brush 2

Hi-Hat Pedal

Hat Close Anlg 2

Hat Close Anlg 3

Hi-Hat Pedal

Tom Rock 3

Tom Electro 3

Tom Analog 3

Tom Dance 3

Low Tom

Tom Brush 3

Hi-Hat Open

Hat Open Analog

Hi-Hat Open 3

Hi-Hat Open

Tom Rock 4

Tom Electro 4

Tom Analog 4

Tom Dance 4

Mid Tom L

Tom Brush 4

Tom Rock 5

Tom Electro 5

Tom Analog 5

Tom Dance 5

Mid Tom H

Tom Brush 5

Crash Cymbal 1

Crash Analog

Crash Cymbal 1

Tom Rock 6

Tom Electro 6

Tom Analog 6

Tom Dance 6

High Tom

Tom Brush 6

Ride Cymbal 1

(

Chinese Cymbal

)

Ride Cymbal Cup

Tambourine

Tambourine Anlg

Tambourine

Splash Cymbal

Cowbell

Cowbell Analog

Cowbell Dance

Cowbell

Crash Cymbal 2

Vibraslap

Vibraslap Analog

Vibraslap

Ride Cymbal 2

Ride Analog

Ride Cymbal 2

Bongo H

Bongo Analog H

Bongo H

Bongo L

Bongo Analog L

Bongo L

Conga H Mute

Conga Analog H

Conga H Mute

Conga H Open

Conga Analog M

Conga H Open

(

Conga L

Conga Analog L

Conga L

)

Timbale H

Timbale L

Agogo H

Agogo L

Cabasa

Maracas

Maracas 2

Maracas

Samba Whistle H *

Samba Whistle L *

Guiro Short

Guiro Long *

Claves

Claves 2

Claves

(

Wood Block H

Dance Perc 3

Wood Block H

)

Wood Block L

Dance Perc 4 *

Wood Block L

Cuica Mute

Scratch H 2

Dance Breath 1

Cuica Mute

Cuica Open

Scratch L 2

Dance Breath 2 *

Cuica Open

Triangle Mute

Triangle Open

Shaker

Jingle Bells

Bell Tree

'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

Lower Keyboard

*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%

Upper Keyboard

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

10
Rhythm Program

Surdo Mute

&ᅊ

'
'ᅊ
(
)

)ᅊ

*
*: Indicates an instrument which requires the Gate Time setting.

ELS-02/ELS-02C Owner’s Manual

165

Rhythm Pattern Program

Drum
Symphony Kit

&ᅊ

China Mix Kit

Live!Std Kit

Live!Std+P Kit

Live!Funk Kit

Live!Funk+P Kit

Surdo Mute

Surdo Open

Hi Q

(

Whip Slap

)

Scratch H

Scratch L

Finger Snap

Click Noise

Metronome Click

Metronome Bell

Seq Click L

Seq Click H

Brush Tap

Brush Swirl *

Brush Swirl*

Brush Swirl *

Brush Slap

(

Brush Tap Swirl *

)

Snare Roll *

Castanet

Snare Soft

Snare Soft 2

Sticks

Kick Soft 2

Kick Soft

Open Rim Shot

Open Rim Shot H

Gran Cassa

Kick Tight

Gran Cassa Mute

Kick

Kick Short

Side Stick

Side Stick Light

Band Snare

Snare

Snare Short

Hand Clap

(

Band Snare 2

Snare Tight

Snare Tight H

)

Floor Tom L

Hi-Hat Closed

Floor Tom H

Hi-Hat Pedal

Low Tom

Hi-Hat Open

Mid Tom L

Mid Tom H

Hand Cymbal

Crash Cymbal 1

High Tom

Hand Cymbal S

Ride Cymbal 1

(

Chinese Cymbal

China Cymbal

Chinese Cymbal

)

Ride Cymbal Cup

Tambourine

Splash Cymbal

Cowbell

Hand Cymbal 2

Crash Cymbal 2

Vibraslap

Hand Cymbal 2 S

Ride Cymbal 2

Bongo H

Bongo L

Conga H Mute

Conga H Open

(

Conga L

)

Timbale H

Timbale L

Agogo H

Dagu Mute

Agogo H

Agogo L

Zhongcha Mute

Agogo L

Cabasa

Dagu Heavy

Cabasa

Maracas

Zhongcha Open

Maracas

Samba Whistle H *

Paigu Middle

Samba Whistle H *

Samba Whistle L *

Paigu Low

Samba Whistle L *

Guiro Short

Xiaocha Mute

Guiro Short

Guiro Long *

Bangu

Guiro Long *

Claves

Xiaocha Open

Claves

(

Wood Block H

Bangzi

Wood Block H

)

Wood Block L

Muyu Low

Wood Block L

Cuica Mute

Zhongluo Mute

Cuica Mute

Cuica Open

Muyu Mid-Low

Cuica Open

Triangle Mute

Zhongluo Open

Triangle Mute

Triangle Open

Muyu Middle

Triangle Open

Shaker

Xiaoluo Open

Shaker

Jingle Bells

Muyu Mid-High

Jingle Bells

Bell Tree

Muyu High

Bell Tree

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

Lower Keyboard

*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%

Upper Keyboard

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ
(
)

)ᅊ

*
*: Indicates an instrument which requires the Gate Time setting.

166

ELS-02/ELS-02C Owner’s Manual

Rhythm Pattern Program

Drum
Live!Brush Kit

&ᅊ

Live!Brush+P Kit

Live!Studio Kit

Live!AcousticKit

Live!Power Kit 1

Live!Power Kit 2

Surdo Mute

Surdo Open

Hi Q

(

Whip Slap

)

Scratch H

Scratch L

Finger Snap

Click Noise

Metronome Click

Metronome Bell

Seq Click L

Seq Click H

Brush Tap

Brush Swirl *

Brush Slap

(

Brush Tap Swirl *

)

Snare Roll *

Snare Roll Aco *

Snare Roll *

Castanet

Brush Slap 2

Snare Studio 2

Snare Soft Aco

SnareSoftPower 1

SnareSoftPower 2

Sticks

Kick Soft

Kick Ambience H

Kick Soft Aco

Kick Ambient+

Open Rim Shot

Rim Acoustic

Open Rim Power 1

Open Rim Power 2

Kick Tight

Kick Ambience L

Kick Mute Aco

Kick Power Open

Kick Jazz

Kick Studio

Kick Open Aco

Kick Power Mute

Side Stick Light

Side Stick

Stick Acoustic

Side Stick Power

Brush Slap 3

Snare Studio M

Snare Acoustic

Snare Power 1

Snare Power 2

Hand Clap

Hand Clap Power

(

Brush Tap 2

Snare Studio L

Snare Rough Aco

Snare Rough 1

Snare Rough 2

)

Tom Brush 1

Floor Tom L

Tom Acoustic 1

Tom Power 1

Hi-Hat Closed

Hi-HatClosedAco

Hi-HatClosePower

HH Closed PW Eg

Tom Brush 2

Floor Tom H

Tom Acoustic 2

Tom Power 2

Hi-Hat Pedal

Hi-HatPedal Aco

Hi-HatPedalPower

Tom Brush 3

Low Tom

Tom Acoustic 3

Tom Power 3

Hi-Hat Open

Hi-Hat Open Aco

Hi-HatOpen Power

Tom Brush 4

Mid Tom L

Tom Acoustic 4

Tom Power 4

Tom Brush 5

Mid Tom H

Tom Acoustic 5

Tom Power 5

Crash Cymbal 1

CrashCymbalAco 1

Tom Brush 6

High Tom

Tom Acoustic 6

Tom Power 6

Ride Cymbal 1

RideCymbal Aco 1

(

Chinese Cymbal

China Cymbal Aco

)

Ride Cymbal Cup

RideCymbalCupAco

Tambourine

Splash Cymbal

SplashCymbal Aco

Cowbell

Crash Cymbal 2

CrashCymbalAco 2

Vibraslap

Ride Cymbal 2

RideCymbal Aco 2

Bongo H

Bongo L

Conga H Mute

Conga H Open

(

Conga L

)

Timbale H

Timbale L

Agogo H

Agogo L

Cabasa

Maracas

Samba Whistle H *

Samba Whistle L *

Guiro Short

Guiro Long *

Claves

(

Wood Block H

)

Wood Block L

Cuica Mute

Cuica Open

Triangle Mute

Triangle Open

Shaker

Jingle Bells

Bell Tree

Wind Chime

'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

Lower Keyboard

*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%

Upper Keyboard

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

10
Rhythm Program

Surdo Mute

&ᅊ

'
'ᅊ
(
)

)ᅊ

*
*: Indicates an instrument which requires the Gate Time setting.

ELS-02/ELS-02C Owner’s Manual

167

Rhythm Pattern Program

Drum
Live!Rock Kit

&ᅊ

Live!Real Drums

Live!RealBrushes

Analog T8 Kit

Analog T9 Kit

House Kit

Surdo Mute

W Kick *

Surdo Open

Disco Fx *

Hi Q

WhiteNoiseDown 1 *

(

Whip Slap

PinkNoise Down 1 *

)

Scratch H

WhiteNoiseDown 2 *

Scratch L

PinkNoise Down 2 *

Finger Snap

Snare Hammer

Snare Drum&Bass1

White Noise Up 2 *

Click Noise

Kick Zap Hard

Kick Break 2

White Noise Up 1 *

Metronome Click

Snare Garg L

Snare Distortion

Pink Noise Up *

Metronome Bell

Kick Tek Power

WhiteNoiseUp Rel *

Seq Click L

Vintage Tip

Kick Slimy

KickDistortionRM

PinkNoise Up Rel *

Seq Click H

Vintage Swirl 1 *

Kick T8 4

Kick T9 2

Kick T9 4

Brush Tap

Vintage Slap 1

Snare Analog CR

Snare T8 Rim

Brush Swirl *

Brush Tap Swirl *

Vintage Swirl 2 *

Snare T8 7

Snare T9 5

Snare T8 5

Brush Slap

Vintage Slap 2

SnareClap Analog

Clap Analog Sm

Hand Clap

(

Brush Tap Swirl *

Vintage TapSwirl *

Snare T8 6

Snare T9 Gate 1

Snare Garg L

)

Snare Roll Rock *

VintageSlapSwirl *

Tom T8 5

Snare Rock Roll *

Snare Roll *

Castanet

Vintage Swirl 3 *

Snare T8 5

Snare T9 3

Snare Soft Rock

Snare Tight

Vintage Slap 3

Kick T8 3

Snare T9 4

Snare T8 1

Sticks

Snare T8 4

Snare T9 Gate 2

Snare T9 5

Kick Soft Rock

Kick Genuine

Kick Soft L

Kick T8 2

Kick T9 4

Kick T9 1

Rim Rock

Rim Real

Open Rim Shot RB

Snare T8 3

Snare T9 6

Snare T9 Gate

Kick Rock Heavy

Kick Real 1

Kick Soft H

T8 Kick Bass

Kick T9 1

Kick T9 2

Kick Rock

Kick Real 2

KickJazzAmbience

Kick T8 1

Kick T9 3

Kick T9 5

Stick Rock

Stick Real

Stick Brush

Snare T8 Rim

Snare T9 Rim

Snare Rock

Snare Real 1

Vintage Slap 4

Snare T8 2

Snare T9 1

Hand Clap Power

Clap Power

Clap T9

(

Snare Dry Rock

Snare Real 2

Vintage Slap 5

Snare T8 1

Snare T9 2

)

Tom Rock 1

Tom Real 1

TomRealBrushes 1

Tom T8 1

Tom T9 1

Hi-HatClosedRock

Hi-HatClosedReal

Hi-Hat Closed RB

Hi-Hat Closed T8

Hi-Hat Closed T9

Hi-Hat Closed T8

Tom Rock 2

Tom Real 2

TomRealBrushes 2

Tom T8 2

Tom T9 2

Hi-HatPedal Rock

Hi-Hat PedalReal

Hi-Hat Pedal RB

Hi-Hat Pedal T8

Hi-Hat Pedal T9

Tom Rock 3

Tom Real 3

TomRealBrushes 3

Tom T8 3

Tom T9 3

Hi-Hat Open Rock

Hi-Hat Open Real

Hi-Hat Open RB

Hi-Hat Open T8

Hi-Hat Open T9

Tom Rock 4

Tom Real 4

TomRealBrushes 4

Tom T8 4

Tom T9 4

Tom Rock 5

Tom Real 5

TomRealBrushes 5

Tom T8 6

Tom T9 5

CrashCymbalAco 1

CrashCymbalReal1

CrashCymbal RB 1

Crash Cymbal T8

Crash Cymbal T9

Tom Rock 6

Tom Real 6

TomRealBrushes 6

Tom T8 7

Tom T9 6

RideCymbal Aco 1

RideCymbalReal 1

Ride Cymbal RB

Ride Cymbal T9

(

China Cymbal Aco

ChinaCymbal Real

ChinaCymbal RB

China Cymbal 2

Crash Cymbal 4

)

RideCymbalCupAco

RideCym Cup Real

Ride Cup RB 1

RideCymbal Cup 2

Tambourine

Tambourine RX5

Tambourine Hit

SplashCymbal Aco

SplashCymbalReal

Splash Cymbal RB

Splash Cymbal

Splash Cymbal 2

Cowbell

Cowbell T8

Cowbell 1

CrashCymbalAco 2

CrashCymbalReal2

CrashCymbal RB 2

Crash Cymbal 4

Crash Cymbal 1

Vibraslap

Cowbell T8

RideCymbal Aco 2

RideCymbalReal 2

Ride Cup RB 2

Ride Cymbal 3

Bongo H

Conga T8 5

Bongo H Open 1 F

Bongo L

Conga T8 4

Bongo L Open 3 F

Conga H Mute

Conga T8 3

Conga Tip

Conga H Tip

Conga H Open

Conga T8 2

Conga Open Slap

Conga H SlapOpen

(

Conga L

Conga T8 1

Conga Open

Conga H Open 2

)

Timbale H

Timbale L

Agogo H

Glass H

Analog Click

Agogo H

Agogo L

Glass L

Conga T8 1

Agogo L

Cabasa

Maracas

Maracas T8

Maracas Slur 2

Samba Whistle H *

Fx Gun 2 *

Vox Drum L

Samba Whistle L *

Fx Gun 1 *

Vox Drum H

Guiro Short

Analog Shaker H *

Scratch H 3 *

Guiro Short

Guiro Long *

Analog Shaker L *

Scratch Down *

Guiro Long *

Claves

Claves T8

Hi Q 3

Claves

(

Wood Block H

Hi Q 1

Wood Block H

)

Wood Block L

Hi Q 2

Wood Block L

Cuica Mute

Scratch H 2

Cuica H

Cuica Open

Scratch L 2

Cuica L

Triangle Mute

Triangle Open

Shaker

Analog Shaker

Jingle Bells

Sleigh Bells

Wind Chime

Snare Hip 1

Snare Piccolo

Snare Break Roll

Snare Hip 2

Snare T8 7

Noise Burst

Snare Hip Gate

SnareRckRollDist

Vox Bell

(

Snare Break 1

Snare Brush Mute

Snare R&B 1

)

Kick Blip

Kick Blip Hard

Vox Alk

Snare Fx 1

Snare Jungle 1

Udu High

Kick Fx Hammer

Kick Sustain

Filter Kick

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

Lower Keyboard

*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%

Upper Keyboard

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*: Indicates an instrument which requires the Gate Time setting.

168

ELS-02/ELS-02C Owner’s Manual

Rhythm Pattern Program

Drum
HipHop Kit

&ᅊ

SFX

Drum Machine

Break Kit

SFX Kit 1

SFX Kit 2

Live! SFX Kit 1

Surdo Mute

Surdo Open

Hi Q

(

Whip Slap

)

Scratch H

Scratch L

Hi-HatClosedT8 2

Snare Drum&Bass1

Finger Snap

Tom T8 3

Kick Break 2

Snare Break 8

Hi-Hat Open T8 2

Snare Distortion

Snare Break 9

Tom T8 6

Kick Tek Power

Hi-HatClosedBrk1 *

Crash T8

KickDistortionRM

Hi-HatClosedBrk2 *

Triangle Mute

BassDrumHardLong

Kick Break Deep

Triangle Open

BassDrumTekPower

Snare Hip

Wind Chime

Bass Drum Dist 5

Snare Lo-Fi

TambourineLight2

Bass Drum Dist 3

Snare Clappy

(

TambourineLight1

Bass Drum Dist 1 *

Snare LdwH Mono

)

Kick HipHop 9

BD Drum & Bass 1

Snare Rock Roll *

Hi-HatClosed Tek

Bass Drum Blip

Snare Gate 1

Kick Gate

BassDrumAnalogSm

Snare Mid

Hi-HatOpen Lo-Fi

Kick T8 2

Snare Break Rim

KickGranCasaOpen

Kick T8 3

Kick Break Heavy

Hi-HatReverseD&B

Kick T9 HD 3

Snare Hip Rim 4

Kick HipHop 1

Kick T9 2

Kick Break 2

Kick Analog CR

Kick T9 4

Kick Break 1

Cutting Noise 1 *

Phone Call *

Cutting Noise 1 *

SnareAnalogSmRim

Snare T9 Rim

Snare Hip Rim 1

Cutting Noise 2 *

Door Squeak *

Cutting Noise 2 *

Snare HipHop 1

Snare T9 1

Snare Break 3

Snare Clappy

Clap T9

Snare Break 1

Snare HipHop 2

Snare T9 4

Snare Break 2

Scratch Split *

Floor Tom L

Tom T9 1

Tom Break 1

Wind Chime *

Hi-HatClosed Hip

Hi-Hat Closed T9

HHClosedRockSoft

Telephone Ring *

Low Tom

Tom T9 2

Tom Break 2

Hi-Hat Pedal Hip

Hi-Hat Pedal T9

Hi-Hat PedalRock

Mid Tom L

Tom T9 3

Tom Break 3

Hi-Hat Open Hip

Hi-Hat Open T9

HH HalfOpen Rock

High Tom

Tom T9 4

Tom Break 4

Ride Cymbal 3

Tom T9 5

Tom Break 5

Crash Cymbal 3

Crash Cymbal T9

Crash Cymbal 1

Shaker 2

Conga T8 1

Tom Break 6

ScratchBDForward

Ride Cymbal T9

Ride Cymbal 3

(

ScratchBDReverse

Conga T8 2

China Cymbal 2

)

Kick HipHop 2

Analog Click

RideCymbal Cup 2

Car Tires Squeal *

SnareHipHopRim 2

Claves T8 1

Tambourine 1 Hit

Car Passing *

HipHop Clap 2

Maracas T8

Splash Cymbal 2

Car Crash *

HipHop Snap 1

TambourineAna CR

Cowbell 1

Siren *

Snare HipHop 3

Analog Shaker

Crash Cymbal 2

Train *

Electric Clap 2

Cowbell T8

Cowbell RX11

Jet Plane *

Kick Hip Deep

CowbellAnalog CR

Ride Cymbal 2

Starship *

Kick HipHop 3

Snare T8 1

Bongo H

Burst *

SnareHipHopRim 3

Snare T8 2

Bongo L

Roller Coaster *

Snare HipHop 5

Snare T8 3

Conga H Tip

Submarine *

Electric Clap 1

Snare Analog CR

Conga H OpenSlap

(

Handbell H

Snare Jungle 1

Conga H Open

)

Kick HipHop 4

Snare Drum&Bass2

Bongo 2 H

HipHop Clap 3

Snare Hip 1

Bongo 2 L

HipHop Snap 2

Snare R&B 1

Conga Open

SnareHipHopRim 5

Snare R&B 2

Agogo L

Shower *

Laugh *

Shower 2 *

HipHop flex 1

Snare Hip 1

Cabasa

Thunder *

Scream *

Thunder 2 *

HipHop flex 2

Snare Wood

Maracas Slur

Wind *

Punch *

Wind 2 *

Shaker 2

Snare Timbre

Timbale H

Stream *

Heart Beat *

Stream 2 *

Kick HipHop 5

Hi-HatClosedT8 1

Timbale L

Bubble *

Foot Steps *

Bubble 2 *

SnareHipHopRim 4

Hi-Hat Open T8 1

Scratch H 3 *

Feed *

Snare HipHop 6

Hi-HatClosedT8 2

Scratch Down *

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

Lower Keyboard

*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ
(
)

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ

%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%

Upper Keyboard

$ᅊ

&ᅊ

'
'ᅊ

String Slap *

Flute Key Click *

Scratch Cut *

CarEngn Ignition *

String Slap *

Flute Key Click *

Feed *

Snare HipHop 11

Hi-Hat Open T8 2

Claves

(

Kick HipHop 10

Hi-Hat Pedal Aco

Wood Block H

)

Snare HipHop 7

Hi-HatClosed Aco

Wood Block L

HipHop Clap 5

Hi-Hat Open Aco

Scratch H 2

Conga H Tip

Hi-HatClosedLoFi

Scratch L 2

Conga H Heel

Hi-HatOpen Lo-Fi

Triangle Mute

Conga H Open

Hi-HatClosed Syn

Triangle Open

Conga L Open 1

Hi-Hat Open Syn

Kick Break 3

Conga L Open 2

Analog Shaker 1

Kick Break 4

Kick HipHop 8

Tambourine RX5 2

Kick Break 5 *

Dog *

Machine Gun *

Dog *

HipHop Clap 6

Tambourine 1 Hit

Kick Break 6

Horse *

Laser Gun *

Horse *

Snare T8 1

Electric Cowbell

Kick Break 7

Bird Tweet *

Explosion *

Bird Tweet *

Snare T8 1 H

Conga T8 3

Hi-HatClosedBrk3

(

HipHop Clap 7

ElectricTriangle

Snare Break 4

)

Tom T8 1

Claves T8 2

Snare Break 5

Hi-HatClosedT8 2

Analog Shaker 2

Snare Break 6

Ghost *

Tom T8 2

Electric Clap 1

Snare Break 7

Maou *

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

10
Rhythm Program

Door Slam *

Firework *

Ghost *
Maou *

*: Indicates an instrument which requires the Gate Time setting.

ELS-02/ELS-02C Owner’s Manual

169

Rhythm Pattern Program

SFX
Live! SFX Kit 2

Noise Kit

VocalEffectsKit

GospelAdLibs

Wonderland Kit

&ᅊ

Cajon Low

Cajon Slap

'ᅊ

Cajon Tip

(
)

PopLatin Kit

Claves High
Claves Low

)ᅊ

Hand Clap

*ᅊ

Finger Snap

*
$
%

Castanet

$ᅊ

Conga H Tip
Conga H Heel
Laser Beam

Conga H Open

Laser Shot *

Conga H Mute

Water Phone *

Conga H SlapOpen

Bubble

Conga H Slap

(

Puddle

Conga H SlapMute

)

Thunder *

Conga L Tip

Shower *

Conga L Heel

Beach *

Conga L Open

Stream *

Conga L Mute

Footstep

Conga L SlapOpen

Door Squeak

Conga L Slap

Door Slam

Conga L Slide *

&ᅊ

'
'ᅊ

)ᅊ

Lower Keyboard

*ᅊ
$
%

$ᅊ
Phone Call *

White Noise *

Male Ha 1 *

Bass Drum

Bongo H Open 1 f

Door Squeak 2 *

Pink Noise *

Female Ha 1 *

Gran Cassa

Bongo H Open 3 f

Door Slam 2 *

WhiteNoiseDown 1 *

Male Ha 2 *

Tom 2

Bongo H Rim

Scratch Cut *

PinkNoise Down 1 *

Male Ha 3 *

Tom 1

Bongo H Tip

(

Scratch Split *

WhiteNoiseDown 2 *

Male Bh 1 *

Snare

Bongo H Heel

)

Wind Chime *

PinkNoise Down 2 *

Female Bh 1 *

Snare Roll *

Bongo H Slap

Telephone Ring 2 *

White Noise Up 2 *

Male Kh 1 *

Hi-Hat Closed

Bongo L Open 1 f

White Noise Up 1 *

Female Kh 1 *

Cymbal

Bongo L Open 3 f

Pink Noise Up *

Male Ph 1 *

Hi-Hat Open

Bongo L Rim

WhiteNoiseUp Rel *

Female Ph 1 *

Tambourine

Bongo L Tip

PinkNoise Up Rel *

Male Th 1 *

Finger Snap

Bongo L Heel

WhiteNoiseUp LFO *

Female Th 1 *

Castanet

Bongo L Slap

PinkNoise Up LFO *

Male Bh 2 *

C'mon *

Triangle Mute

Timbale L

Female Bh 2 *

Hoo! *

Wood Block L

Male Kh 2 *

Aha! *

Triangle Open

Female Kh 2 *

Oh Yeah *

Wood Block H

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ
(

CarEngn Ignition *

Male Ph 2 *

Yayayayayah *

Hand Clap

)

Car Tires Squeal *

Female Ph 2 *

Put Your Hands…*

Jingle Bells

Paila L

Car Passing *

Male Th 2 *

C'mon Now *

Bell Tree

Timbale H

Car Crash *

Female Th 2 *

Heeey *

Alarm Bell *

Siren 2 *

Male Ha 4 *

Everybody Now *

Train *

Train 2 *

Female Ha 2 *

ClapYourHands…*

Horn 1 *

Jet Plane 2 *

Male Ha 5 *

WithAllYourSoul *

Horn 2

Starship *

Male Ha 6 *

Stand Up On…*

Siren *

Paila H

Burst *

Male Bh 3 *

Uhh Yeah *

CarEngn Ignition *

Cowbell Top

Roller Coaster *

Female Bh 3 *

Aaoh *

Car Crash *

Cowbell 1

Submarine *

Male Kh 3 *

Come On! *

Helicopter *

Cowbell 2

Female Kh 3 *

Yeah! *

Starship *

Cowbell 3

(

Male Ph 3 *

Alright Now! *

Sheep *

Guiro Short

)

Female Ph 3 *

One *

Goat *

Guiro Long *

Male Th 3 *

Two *

Oxen *

Metal Guiro Short

Female Th 3 *

Three *

Whinny *

Metal Guiro Long *

Laugh *

Male Bh 4 *

Four *

Horse *

Tambourine

Scream 2 *

Female Bh 4 *

One! *

Lion *

Tambourim Open

Punch 2 *

Male Kh 4 *

Two! *

Dog

Tambourim Mute

Heart Beat *

Female Kh 4 *

Three! *

Cat *

Tambourim Tip

Foot Steps 2 *

Male Ph 4 *

Four! *

Hen *

Maracas

Female Ph 4 *

Five! *

Owl *

Shaker

Male Th 4 *

Six! *

Insects

Cabasa

Female Th 4 *

Seven! *

Frog

Cuica Mute

(

Eight! *

Tweet 1

Cuica Open

)

Clap! *

Tweet 2 *

Cowbell High 1

Gospel Clap 1 *

Cuckoo Clock *

Cowbell High 2

Gospel Clap 2 *

Big Clock

Shekere

Bell *

Shekere Tone

Telephone *

Triangle Mute

Camera

Triangle Open

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%

Upper Keyboard

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

Gnaw
Machine Gun 2 *

&ᅊ

Applause *

Wind Chime

Laser Gun *
Explosion 2 *

'ᅊ

Firework *

(
)

)ᅊ

*
*: Indicates an instrument which requires the Gate Time setting.

170

ELS-02/ELS-02C Owner’s Manual

Rhythm Pattern Program

SFX
Cuban Kit

Arabic Kit

&ᅊ

Turkish Kit

China Kit

OrchestraPerc

Asma Davul L

Symphonic Gong 1

Asma Davul R

Symphonic Gong L *

Asma Davul Side

Symphonic Gong 2

(

Asma Davul Both

Timpani E

)

KoltukDavul Flam

Timpani F

KoltukDavul Teke

Timpani F#

Koltuk Davul Tek

Timpani G

Koltuk Davul Dum

Timpani G#

Bendir Teke Flam

Timpani A

'
'ᅊ

)ᅊ

*
*ᅊ
$
%

$ᅊ

Conga H Tip

Bendir Teke Dead

Conga H Heel

Bendir Tek Dead

Da Cha 2

Timpani A#
Timpani B

Nakarazan Dom

Bendir Teke

Da Gu mp

Timpani C

Conga H Mute

Cabasa

Bendir Tek

Da Gu Rim

Timpani C#

Conga H SlapOpen

Nakarazan Edge

Bendir Slap

Da Gu f

Timpani D

Conga H Slap

Hager Dom

Bendir Dum

Da Gu Hand

Timpani D#

(

Conga H SlapMute

Hager Edge

Zil Right Close

Da Gu Roll *

Timpani High E

)

Conga L Tip

Bongo H

Zil Right Open

Pai Gu 4

Gran Cassa Hard

Conga L Heel

Bongo L

Zil Left Close

Pai Gu 4 High

Gran Cassa Soft

Conga L Open

Conga H Mute

Zil Left Open

Pai Gu 3

Gran Cassa Hit

Conga L Mute

Conga H Open

Tef Teke Flam

Pai Gu 3 High

Gran Cassa Cresc

Conga L SlapOpen

Conga L

Tef Tek Mute

Pai Gu 2

ConcertSnareDrum

Conga L Slap

Zagrouda H

Tef Teke Damped

Pai Gu 2 High

Snare Roll *

Conga L Slide *

Zagrouda L *

TefTekMuteMedium

Pai Gu 1

Snare Drum Light

Bongo H Open 1 f

Kick Soft

Tef Dum Mute

Luo High 1

Snare Ensemble

Bongo H Open 3 f

Side Stick

Tef Cymbal

Gong Batter

Sus Cym 1 Roll S *

Bongo H Rim

Snare Soft

Tef Cymbal Mute

Jin Luo

Sus Cymbal 1

Bongo H Tip

Arabic Hand Clap

Tef Tremolo *

Luo High 2

Sus Cym 2 Roll L *

(

Bongo H Heel

Snare Drum

Tef Shake 1

Luo Mid-Low

Sus Cymbal 2

)

Bongo H Slap

Floor Tom L

Tef Shake 2

Luo

Concert Tom 1

Bongo L Open 1 f

Hi-Hat Closed

Tef Tek Flam

Jin Luo Low

OrchCymbal 1 ckd

Bongo L Open 3 f

Floor Tom H

Tef Full Open

Da Cha 1

Concert Tom 2

Bongo L Rim

Hi-Hat Pedal

Tef Teke OpShort

Da Cha Effect

Orch Cymbal 1

Bongo L Tip

Low Tom

Tef Tek Op Short

Zhongcha

Concert Tom 3

Bongo L Heel

Hi-Hat Open

Tef Tek Open

Xiaocha Effect

Orch Cymbal 2

Bongo L Slap

Mid Tom L

Tef Dum Open

Xiaocha

Concert Tom 4

Timbale L

Mid Tom H

Hollo FingerDead

Mang Luo Low

Concert Tom 5

Crash Cymbal 1

Hollo Slap

Mang Luo Mid

Finger Cymbal

High Tom

Hollo Dum

Qing

Gong

Ride Cymbal 1

Kasik

Finger Bell

Ride Cymbal Tip

Crash Cymbal 2

Kasik Flam

Luo Big

China Cymbal

Paila L

Duhulla Dom

BDarbuka TekDead

Muyu Low

Ride Cymbal Cup

Timbale H

Tambourine

BDarbuka TekFlam

Muyu Mid-Low

Tambourine

Duhulla Tak

BassDarbuka Teke

Muyu Mid

Splash Cymbal

Cowbell

BDarbukaTekeFin1

Muyu High

Cowbell

Duhulla Sak

BDarbukaTekeFin2

Nanbangzi Roll *

Jingle Ring

Claves

Bass Darbuka Tek

Nanbangzi

Castanet Roll *

Paila H

Doff Dom

BassDarbukaSlap1

Bangu

Table Castanet

Cowbell Top

Katem Dom

BassDarbukaSlap2

Ban

Bongo H Stick

Katem Tak

Bass Darbuka Dum

Bangu Roll *

Bongo L Stick

Katem Sak

DarbukaRollClose *

ChineseOperaVo 1 *

Conga H Stick

Katem Tak

Darbuka RollOpen *

ChineseOperaVo 2 *

Conga L Stick

&ᅊ

'
'ᅊ

)ᅊ

Lower Keyboard

*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ
(
)

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

&ᅊ

'
'ᅊ
(

Guiro Short

Doff Tak

DarbukaTekeFlamD

ChineseOperaVo 3 *

Whip

)

Guiro Long *

Tabla Dom

Darbuka Tek Dead

Yunluo F

Rotating Tom 1

Tabla Tak 1

DarbukaTekDamped

Yunluo F#

Tubular Bell L

Tabla Tik

Darbuka TekeFlam

Yunluo G

Rotating Tom 2

Tabla Tak 2

Darbuka Teke

Yunluo G#

Tubular Bell M

Tabla Sak

DarbukaTekeFin 1

Yunluo A

Rotating Tom 3

Tabla Roll Edge *

DarbukaTekeFin 2

Yunluo A#

Tubular Bell H

Tabla Flam

Darbuka Tek 1

Yunluo B

Rotating Tom 4

Maracas

Sagat 1

DarbukaTekeFin 3

Yunluo C

Rotating Tom 5

Shaker

Tabel Dom

DarbukaTekeFin 4

Yunluo C#

Temple Block H

Cabasa

Sagat 3

Darbuka Tek 2

Yunluo D

Temple Block L

Tabel Tak

Darbuka Slap Med

Yunluo D#

Claves

(

Sagat 2

Darbuka Slap

Yunluo E

Wood Block H

)

Rik Dom

Darbuka Dum

Yunluo High F

Wood Block L

Rik Tak 2

Bongo Tek Roll *

Yunluo High F#

Anveil

Rik Finger 1

Bongo Flam

Yunluo High G

Triangle Roll *

Rik Tak 1

Bongo Tek Flam

Yunluo High G#

Triangle Mute

Rik Finger 2

Bongo Tek

Yunluo High A

Triangle Open

Rik BrassTremolo *

Bongo Slap

Yunluo High A#

Bell Tree

Rik Sak

Bongo Flam Hi

Yunluo High B

Sleigh Bells

Rik Tik

Bongo Dum

Yunluo High C

Wind Chime

)ᅊ

*
*ᅊ

Tambourine

$
%

Upper Keyboard

$ᅊ

&ᅊ

'
'ᅊ

)ᅊ

*
*ᅊ
$
%
&

$ᅊ

10
Rhythm Program

Conga H Open

&ᅊ

'
'ᅊ
(
)

)ᅊ

*
*: Indicates an instrument which requires the Gate Time setting.

ELS-02/ELS-02C Owner’s Manual

171

Rhythm Sequence Program

DISPLAY SELECT

Rhythm Sequence Program
With the Rhythm Sequence Program function, you can
string together any of the Electone’s existing rhythms and
the rhythms of your own creation together to make
complete rhythm compositions.
You can save four rhythm compositions (each containing
up to 140 bars) to the Sequence buttons on the panel for
future recall. Two or more rhythm compositions can be
played back in succession, letting you divide a Song into
parts and play back the rhythm data as desired. Here are a
couple of example applications:

VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

• When you want to play more than two Songs in a
medley, save the rhythm composition for each Song to
a separate sequence button. You can then recall each
desired Song by simply pressing the corresponding
sequence button to which the Song is saved.
• When you want to practice a Song in separate sections
(for example, separately practicing the verse, chorus
and bridge), divide the Song into the relevant parts. For
example, save the intro part to the [SEQ. 1] button, the
main chorus part to the [SEQ. 2] button, the ending to
the [SEQ. 3] button, and so on. Then, recall the desired
part simply by pressing the appropriate sequence
button. You can also play through a Song by recalling
all the parts in sequence.

Selecting a sequence

Any rhythm currently playing will automatically be
stopped when you call up the Rhythm Sequence
Program function.

Press one of the Sequence buttons
([SEQ. 1] – [SEQ. 4]) on the left half in
the display to select the Rhythm
Sequence number you want to edit.
The lamp of the selected numbered sequence button
in the Rhythm section lights.

There are two ways to program a Rhythm Sequence:
creating your own sequence from scratch, or copying and
editing an existing sequence that is similar to the
sequence you want to create.
Reference pages
• Programming a Sequence (page 173)
• Copying a Rhythm Sequence (page 177)

Press the [SEQUENCE] button in the
DISPLAY SELECT section.
The MENU Page of the Sequence display appears.
RHYTHM

VOLUME
MAX

SEQ.

MARCH

WALTZ

SWING&
JAZZ

POPS

R&B

LATIN

WORLD
MUSIC

BALLAD

ROCK

DANCE

2
MIN

172

ELS-02/ELS-02C Owner’s Manual

Rhythm Sequence Program
NOTE

Instead of pressing the Sequence button on the
display, you can press one of the sequence buttons in
the Rhythm section on the panel to select the
sequence number.
This selects the Sequence number, to which a
rhythm composition can be saved.
If you want to edit an existing rhythm composition,
refer to “Copying a Rhythm Sequence” on page 177.
If you want to program a Rhythm Sequence from
scratch, refer to “Programming a Sequence” below.

• When entering an Intro section, you can confirm the
number of measures at the top of the display.
• When you press the ENDING [1] button while the Main
section is playing back, a fill in pattern will be called up
before the Ending 1 pattern. In the Rhythm Sequence
program, however, a fill in pattern is not called up when
Ending 1 is entered to the Sequence.

One measure of the selected rhythm is entered and
its name is displayed as a box in the rhythm row on
the display. When the rhythm is entered, the cursor
(colored orange) will automatically move one step to
the right. A maximum of 140 measures can be
entered to a single sequence. When you select an
ending pattern and press the [SET] button, an entire
ending pattern (more than one measure) is entered.
You cannot enter a rhythm after an ending pattern.

Programming a sequence

1
2

Press the [RHYTHM] button at the top
right of the display to call up the
RHYTHM Page.
Press the rhythm button corresponding
to the rhythm you want to enter to the
sequence. If you press User button [1]
or [2], you can select a rhythm of your
own creation (User rhythm).
The rhythm menu of the selected rhythm button is
displayed.
RHYTHM

Press the [SET] button in the display.

Repeat steps 2 through 5 above to enter
the rhythm and create your own rhythm
composition.

Turning the power off before quitting or closing the
Rhythm Sequence Program erases any sequences you
have made. Before turning the power off, quit the
Rhythm Sequence Program (page 176).

VOLUME
MAX

SEQ.

MARCH

WALTZ

SWING&
JAZZ

POPS

R&B

LATIN

WORLD
MUSIC

BALLAD

ROCK

DANCE

Auditioning a sequence
MIN

Select the desired rhythm from the
displayed rhythm menu.

You can play a sequence you are editing at any time to
audition the changes.

Rhythm Program

SEQ.

Move the cursor to the desired position
for playback.
Move the cursor by using the Data Control dial, or
the POSITION buttons on the display.

Select a rhythm section (Main A – D, Fill
in A – D, Intro 1 – 3, Ending 1 – 3, or
Break) by pressing one of the rhythm
control buttons on the panel.
The selected rhythm and section appears at the top
of the display.
ELS-02/ELS-02C Owner’s Manual

173

Rhythm Sequence Program

INSERT

Press the rhythm [START] button on the
panel.
SYNCHRO
START

START

For inserting a rhythm before the current cursor
position. The new rhythm is entered just before the
cursor position and all other rhythms to the right of
the cursor are moved to accommodate the new
number. This operation is not available between
measures of an ending pattern.
Additional rhythms cannot be entered beyond the
Rhythm sequence function’s capacity of 140. If the
Insert operation results in the rhythm number going
over the capacity, a “Data Full” message appears and
the operation cannot be executed.

BREAK

The Sequence plays back. Pressing the [START]
button again stops playback.

Editing an existing Rhythm
Sequence

DELETE
For deleting a rhythm at the current cursor position.
When the ending pattern is selected, pressing the
[DELETE] button deletes the entire ending pattern
(more than one measure).

You can insert a new rhythm between the rhythms you
have already entered, or delete the entered rhythm from
the sequence.

CLEAR
For erasing all patterns entered to the selected
sequence.
After selecting [CLEAR], a message appears
prompting confirmation of the operation.
Select [CLEAR] to clear the currently selected
Rhythm Sequence, or select [CANCEL] to abort the
operation and return to the previous display.

1 POSITION
These are cursor controls for moving the cursor (colored
orange) along the rhythm row in the display.
Moves the cursor to the first position.
Moves the cursor one step to the left.
Moves the cursor one step to the right.
Moves the cursor five steps to the right.

2 DATA
These are data controls for entering rhythms and deleting
existing rhythms in the rhythm row.
NOTE
When you insert an ending pattern into the editing sequence,
any existing rhythm data that follows an Ending pattern is
automatically deleted.

SET
For initially entering a rhythm to an empty position
in the rhythm row, or for replacing a pattern at the
cursor position. Pressing the [SET] button enters the
rhythm selected from the rhythm menu to the
cursor position.
This operation is not available between measures of
an ending pattern.

174

ELS-02/ELS-02C Owner’s Manual

Programming a Registration
Sequence
The Registration Sequence feature allows you to have
desired Registrations automatically called up in sequence,
when playing a Rhythm Sequence. It lets you program the
timing (measure/beat/clock) at which the Registration is
changed. You can also program the Next Unit function in
Registration Sequence.
A Registration Sequence is saved as a part of the
corresponding Rhythm Sequence.
With this feature, you can have the sounds of the
instrument change as desired automatically to match the
Rhythm Sequence playback.

Press the [REGIST] button at the top
right in the display to call up the
Registration Sequence display.
NOTE
If you are loading a Registration while a rhythm is playing,
the sequence data and User rhythms in the Registration
data cannot be loaded.

Rhythm Sequence Program

Entering Next Unit:
When you program the Next Unit function in
Registration Sequence, the next registration data in
current Song can be loaded automatically just by playing
the Rhythm Sequence.

1
The Registration Sequence is programmed from this
display. The entered Registration number is shown
along the Registration row in the middle of the
display.

2
3

Using the
buttons in the
display or the Data Control dial, set the
Measure/Beat/Clock position at which
you want to enter the Next Unit (1 beat =
96 clocks).
Press the NEXT UNIT [INSERT] button in
the display.
The Next Unit mark
appears at the timing point
you set in step 1, indicating that the Next Unit is
entered.

Select a Bank, then press the desired
numbered button in the Registration
Memory section.

Next Unit Loading Time
Using the
buttons in the
display or the Data Control dial, set the
Measure/Beat/Clock position at which
you want to change the Registration (1
beat = 96 clocks).

• Loading a Next Unit may take a few seconds (the time
may differ depending on the size of the data to be
loaded).
• Next Unit data can be loaded by two ways: using the right
footswitch and programming Next Unit in the
Registration Sequence. Loading time is the same
regardless of which way you load the Next Unit data.

When using the Data Control dial, first press the
number you wish to change in the display, then turn
the dial.

Press the DATA [SET] button in the
display.
The Registration number appears in the display (in
the timing order), indicating that the Registration is
entered. Up to 140 Registrations can be entered.
If some Registration numbers are entered to the
same Measure/Beat/Clock, the last entered one takes
priority.

Repeat steps 2 through 4 above to set
the Registration Sequence.

You can move or delete the entered Registration
Sequence (Registration number or Next Unit data) from
the sequence.

Rhythm Program

Editing an existing Registration
Sequence

To move an entry:

1
2
3

Using the POSITION buttons, move the
cursor and select the data (Registration
number or Next Unit) you want to move.
Change the position by pressing the
Bar/Beat/Clock buttons in the display.
To move the Registration number
timing, press the DATA [SET] button. To
move the Next Unit timing, press the
NEXT UNIT [SET] button.
The position of the Registration number or Next
Unit is changed and displayed in the proper order.

ELS-02/ELS-02C Owner’s Manual

175

Rhythm Sequence Program

To erase an entry:

1
2

The Registration Memory also changes with
Rhythm Sequence playback, if the sequence includes
a Registration Sequence.

Using the POSITION buttons, move the
cursor and select the data (Registration
number or Next Unit) you want to delete.

Rhythm playback automatically stops when the
sequence reaches its end.
If you’ve stopped rhythm playback in the middle of
the sequence, press the [START] button again to
resume playback.

Press the [DELETE] button to delete the
data.

Quitting the Rhythm Sequence
Program

Playing all sequences in order

You can quit the Rhythm Sequence Program from any of
its display pages. When you quit, the sequence you have
made will be automatically saved.

To quit the Rhythm Sequence Program:
Press the [SEQUENCE] button on the panel.
The Voice Display appears, indicating that the Rhythm
Sequence Program is closed.

You can also have up to all four Rhythm Sequences
automatically play in order, one after another.

1
2

When quitting the Rhythm Sequence Program, the
square at the top left of the display turns light blue for a
few seconds, indicating that the sequence is currently
being saved. Do not turn the power off while the
sequence is being saved.

Pressing one of the SEQ. buttons while a Rhythm
Sequence is playing back automatically cancels the
pressed sequence, and its LED turns off. You cannot
cancel a sequence that is currently playing. The SEQ.
lamp goes out when the sequence assigned to it is
finished playing.

Playing Rhythm Sequences
To play any of the Rhythm Sequences
you have created:
Press the appropriate Sequence button
([SEQ. 1] – [SEQ. 4]) on the panel.
The SEQ button’s lamp lights.
RHYTHM

VOLUME
MAX

SEQ.

MARCH

WALTZ

SWING&
JAZZ

POPS

R&B

LATIN

WORLD
MUSIC

BALLAD

ROCK

DANCE

To start a sequence using the Left
Footswitch:
You can start or stop the Rhythm Sequence playback
using the left footswitch.

1
MIN

Press the rhythm [START] button.
The rhythm in the selected sequence starts playback.
When one of the four Rhythm Sequences is playing,
each programmed rhythm that plays is indicated by
the lit LED of the Rhythm buttons.

176

ELS-02/ELS-02C Owner’s Manual

Press the rhythm [START] button.
The Rhythm Sequences start from the lowest
number and play in order automatically to the
highest number. (For example, if you press Sequence
buttons 4, 2 and 1 in that order, the sequences will be
played back not in the order you pressed them, but
in their numeric order: 1, 2, then 4.) This function
effectively allows you to make a long Rhythm
Sequence that exceeds the 140-pattern memory limit
of a single sequence.

NOTICE

Press the desired Sequence buttons,
making sure that all their LEDs are lit.

Press the desired Sequence buttons,
making sure that all their LEDs are lit.
Press the [FOOT SWITCH] button on the
panel to call up the Footswitch display,
LEFT Page.

Saving Rhythm Pattern and Rhythm Sequence Data to a USB

Set the control mode of the Footswitch
to RHYTHM STOP.
(See page 178 for information about the Footswitch
settings.)

Press the Left Footswitch with your
right foot to turn the sequence on.
Pressing the Left Footswitch again in the middle of
the sequence playback cancels the Rhythm
Sequence.
When you are playing a Rhythm Sequence that is
made up of several sequences (SEQ. buttons),
pressing the Left footswitch turns off the currently
playing Rhythm Sequence, and pressing it again
starts the next sequence.

Saving Rhythm Pattern and
Rhythm Sequence Data to a
USB Flash Drive
You can save your own rhythm patterns (created in the
Rhythm Pattern Program) and Rhythm Sequences
(created in the Rhythm Sequence Program) to a USB
flash drive. Refer to the section “Saving Registrations and
Other Data to a Unit” on page 118 for instructions.
When loading your original Rhythm data from a USB
flash drive back to the Electone, be sure to stop the
rhythm if it is playing. Loading cannot be executed when
a rhythm is running.

Copying a Rhythm Sequence
You can copy a Rhythm Sequence stored on a sequence
button to another button. You can also add a Rhythm
Sequence to the end of another Rhythm Sequence.

Press the EDIT [COPY] or [ADD] button
in the Sequence Menu page.

The Copy From or Add From display appears.

Rhythm Program

NOTE
If you add a Rhythm Sequence to another Rhythm
Sequence that has an ending at the end, the section will
automatically change to MAIN A and the new sequence
will be added after the MAIN A part.

Select the number of the desired
Rhythm Sequence program to which
you want to copy or to which you want
to add.
A message appears prompting confirmation of
operation.

Press the [COPY] or [ADD] button to
copy or add the Rhythm Sequence.
Press [CANCEL] to abort the operation.

If necessary, edit the sequence.
Refer to the section “Editing an existing Rhythm
Sequence” on page 174 and/or “Editing an existing
Registration Sequence” on page 175.

ELS-02/ELS-02C Owner’s Manual

177

Footswitches, Knee Lever and
Expression Pedals

These leg- and foot-operated controls allow you to execute various performance functions and switch the
effect on/off, without taking your hands from the keyboard.

Footswitches
The Electone has two Footswitches on the main
expression pedal. The Right Footswitch is used for the
Registration Shift function. The Left Footswitch can be
set to control one of the following functions: Rhythm,
Glide, and Rotary speaker.
See page 99 for the details of the Registration Shift
function or Right Footswitch.
The explanation of the Left Footswitch is given here.
Left Footswitch

Press the [FOOT SWITCH] button.
Press the [LEFT] button at the top right
of the display to call up the LEFT Page.
DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

Right Footswitch

U.ORGAN
FLUTES

Expression
Pedal

L.ORGAN ROTARY SP
SPEED
FLUTES

In this display, you can assign the control function to
the Left Footswitch: Rhythm, Glide, and Rotary
Speaker.
If you choose OFF here, the Left Footswitch will not
control any function.
NOTE
When the Next Page function of the score display is
assigned to the left foot switch, and if rhythm, glide and/or
rotary speaker are assigned to the left foot switch as well,
pressing the foot switch performs both the assigned
function and the Next Page function.
For details on the Next Page function, refer to page 125.

178

ELS-02/ELS-02C Owner’s Manual

Footswitches

Controlling the Rhythm

Controlling Glide

You can control the rhythm start/stop or switch the
rhythm sections by using the Left Footswitch.

You can control the Glide effect by using the Left
Footswitch.

1 STOP
Switches the rhythm on/off whenever you press the
Footswitch.

2 BREAK
When you press the Footswitch, the Break section turns
on. This function corresponds to the [BREAK] button on
the panel.

Pressing the Footswitch immediately lowers the pitch of
the selected Voice or Voices by a half-step and releasing it
slowly returns the pitch to the original.

1 Voice Selections (UPPER1/UPPER2/
LEAD1/LEAD2/LOWER1/LOWER2)
Select the desired Voice section(s) to which the Glide
function is to be applied.

3 MAIN A – MAIN D

2 TIME

These functions correspond to the MAIN/FILL IN [A] –
[D] buttons on the panel.
For example, when the [MAIN A] button is selected in
this display and you press the Footswitch, the rhythm
section switches to Main A or Fill In A.

Determines the speed of the Glide function, or in other
words, how gradually the pitch returns when the
Footswitch is released. Higher values make the speed
slower.
Range: 1 – 5

Footswitches, Knee Lever and Expression Pedals

4 INTRO 1 – INTRO 3

These functions correspond to the INTRO [1] – [3]
buttons on the panel. For example, when the INTRO [1]
button is selected in this display and you press the
Footswitch, the rhythm section switches to Intro 1.

5 ENDING 1 – ENDING 3
These functions correspond to the ENDING [1] – [3]
buttons on the panel. For example, when the ENDING
[1] button is selected in this display and you press the
Footswitch, the rhythm section switches to Ending 1.
After the ending pattern is played, the rhythm stops.
Reference page
• Rhythm Structure (page 57)

ELS-02/ELS-02C Owner’s Manual

179

Knee Lever

Controlling Rotary Speaker
You can control the Rotary Speaker effect (on/off ) by
using the Left Footswitch.
Reference page
• Rotary Speaker (page 49)

Knee Lever
The Knee Lever, located on the underside of the keyboard
panel, can be used to turn one of the following on and off:
Sustain effect, Melody On Chord function, Lead Slide
effect, or Solo function.
NOTE
One or more functions can be assigned to the Knee Lever
simultaneously. This enables you to use the Knee Lever to
instantly turn on/off all assigned functions.

Controlling Sustain

When the [Rotary Speaker] button is selected in this
display and you press the Footswitch, the Rotary Speaker
effect is switched on or off. This function corresponds to
the [ROTARY SP SPEED] button on the panel. To use
this function, you’ll need to make the appropriate Rotary
Speaker settings for each Voice section or Organ Flute
Voice. For details, see page 49.

You can control the on/off status of sustain for the Upper
and Lower keyboards by using the Knee Lever. Sustain for
the Pedalboard cannot be controlled.

Make sure that the Upper and/or Lower
Sustain buttons have been turned on.
SUSTAIN
UPPER
(KNEE)

LOWER
(KNEE)

Calling up another page of the
music score

PEDAL

Reference page
• Sustain (page 48)

From the MDR display, you can call up another page of
the music score by using the Left Footswitch. For details,
see page 125.

Fold the Knee Lever down.
Sustain is off when the Knee Lever is folded down.

Controlling the Super
Articulation Voices
Folding down

By following the settings on page 45, you can control the
Super Articulation Voice (of which the name starts with
“S-”) by using the Left Footswitch.

180

ELS-02/ELS-02C Owner’s Manual

Knee Lever

To apply sustain, press the Knee Lever
to the right.
Sustain is constantly applied as long as the Knee
Lever is pressed. Releasing the Knee Lever turns
sustain off.

Controlling Melody On Chord

The Melody On Chord section appears in the right
half of the display.

1 When the Knee Lever is folded up:
Sustain is applied constantly, as long as the front
panel Sustain buttons are on.

2 When the Knee Lever is vertical:

Press the [A.B.C./M.O.C.] button on the
front panel.

Sustain is cancelled.

Set the KNEE control to “ON,” and
select one of the modes.
Reference page
• Melody On Chord (page 67)

3 When the Knee Lever is continuously
pressed to the right:

DISPLAY SELECT

Sustain is on.

VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

Off
On
Pressing to the right

11
Press the Knee Lever to the right with
your knee when you want to apply the
M.O.C. effect.
The M.O.C. effect is applied constantly, as long as
the Knee Lever is pressed.
When you release the Knee Lever, the M.O.C. effect
is cancelled.

ELS-02/ELS-02C Owner’s Manual

Footswitches, Knee Lever and Expression Pedals

181

Expression Pedals

Controlling Lead Slide

Call up the Voice Condition display
Page 2 of the Lead Voice section to
which you want to apply the Lead Slide
effect.
Reference page
• Voice Condition display (page 44)

Press the [KNEE] button of the Slide
section on the display.

Expression Pedals
The Expression pedal can be used to control the volume
with your foot as you play. Moreover, the ELS-02C has
another Expression Pedal, the 2nd Expression Pedal.
The 2nd Expression Pedal can be used to control the
Pitch Bend and the Tempo of the Rhythm. It also features
a center detent for easily returning to the middle (zero)
position. The explanation of the 2nd Expression Pedal is
given here.
Reference page
• Getting Started (page 13)
Expression Pedal

2nd Expression Pedal
(ELS-02C)

Press the Knee Lever to the right with
your knee when you want to apply the
Slide effect.
The Slide effect is applied as long as the Knee Lever
is pressed. Releasing the Knee Lever, cancels the
Lead Slide effect.

Press the [UTILITY] button on the front
panel.
The Utility display appears.

Press the [EXP.] button in the upper
right of the display to call up the EXP.
(Expression) Page.
DISPLAY SELECT

Controlling the Solo function
You can turn the Solo function on/off by using the Knee
Lever. See page 27 for more information.

VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

182

ELS-02/ELS-02C Owner’s Manual

L.ORGAN ROTARY SP
SPEED
FLUTES

Expression Pedals

In this display, you can assign the Pitch Bend control
or Tempo control to the 2nd Expression Pedal. If
both Pitch Bend and Rhythm Tempo controls are set
to ON, both functions are applied when you press
the 2nd Expression Pedal.
Generally one of them is assigned to the 2nd
Expression Pedal.

Controlling the Rhythm Tempo

Controlling Pitch Bend
1

1 MODE
Determines the range of tempo change.
Range: 1 – 12
The setting 2 (NARROW) results in a small amount of
tempo change (70% – 140%); the setting 12 (WIDE)
results in a large amount of tempo change (50% – 200%).

1 MODE
Determines the range of the Pitch Bend control. Each
step changes the pitch range by a semitone.
Range: 1 – 12
The setting 2 (NARROW) results in a small amount of
pitch variation (over +/- two semitones); the setting 12
(WIDE) results in a large amount of pitch variation (over
+/- one octave).

2 TEMPO
When you want to control the tempo with the 2nd
Expression Pedal, set this to “ON.”
When set to on, pressing the pedal down with your toe
speeds up the tempo and pressing it back with your heel
slows it down. Because of the spring-loaded center
detent, you can instantly return to the normal tempo by
releasing your foot from the pedal.

11
Footswitches, Knee Lever and Expression Pedals

2 Voice Sections (PITCH BEND)
Selects the Voice sections to which the Pitch Bend
function will be applied, and turns the function ON.
Pitch Bend can be selected independently or together for
Upper Voices 1 and 2, Lead Voice 1 and 2, Pedal Voices 1
and 2.

ELS-02/ELS-02C Owner’s Manual

183

12 Transpose and Pitch Controls
There are two pitch-related controls on the Electone: Transpose and Pitch. Transpose allows you to change the
key of the instrument and Pitch lets you finely adjust the tuning.
Transpose and Pitch can be adjusted in the Utility display. (The settings here cannot be recorded to the Music
Data Recorder.)

1
2

Press the [UTILITY] button.

2 PITCH

The Utility display appears.

Determines the fine pitch setting of all the Voices. Each
step changes the pitch by 0.2 Hz. The default Pitch is
440.0 Hz (corresponding to key A3).
Range: 427.2 Hz – 452.6 Hz

Press the [PITCH] button at the top right
of the display to call up the PITCH Page.
DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

You can also change the Transpose and Pitch for each
Voice section, in the Voice Condition display. For more
information, see page 46.
NOTE
The Transpose/Pitch setting here is not applied to an XG Song.

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

In this display, you can change the Transpose and
Pitch settings by using the
buttons on the
display or the Data Control dial.

1 TRANSPOSE
Determines the coarse pitch setting of all the Voices, and
is adjustable in half-steps (semitones).
Range: -6 – +6

184

ELS-02/ELS-02C Owner’s Manual

13 Connections
On the underside of the Electone keyboard is a separate panel equipped with various input/output terminals
and miscellaneous controls.

3 MIC./LINE switch

Accessory Jacks and
Controls
This section provides brief explanations for each jack/
control on the Electone. For details on connecting to
external devices, see page 187.

When connecting a microphone or other electric/
electronic instrument to the MIC./LINE IN jack, make
sure to set this level gain switch appropriately, depending
on the device you use.

4 PHONES jacks
For connection of a stereo headphone set. When
headphones are connected to this jack, sound to the
Electone’s built-in speaker system is automatically cut off,
allowing you to play without disturbing others.
Reference page
• Using headphones (page 187)

INPUT
VOLUME
MIN

MAX

MIC. /
LINE IN MIC.

LINE PHONES

1 INPUT VOLUME knob

Connections

For adjusting the level of input signal from the MIC./
LINE IN jack.

2 MIC./LINE IN jack
For connecting a mono input, such as microphone or
guitar. The Electone outputs the microphone or guitar
sounds, with reverb processing, through the built-in
speaker system.
Reference page
• Connecting a microphone or guitar (page 189)

ELS-02/ELS-02C Owner’s Manual

185

Accessory Jacks and Controls

8
5

7
USB

AUX IN
L / L+R
R

AUX OUT
L / L+R
R

AUX OUT
L

TO DEVICE
(LEVEL FIXED)

TO HOST

)

OUT
MIDI

5 AUX IN (Phone; L/L+R, R) jacks

* An ELS-01 series instrument with an installed STAGEA Vitalize
unit has two [USB TO DEVICE] terminals installed here.

This pair of stereo phone jacks is for connection to an
external device. The signal from the connected external
device sounds from the Electone’s built-in speakers.

8 USB Dock

Reference page
• Outputting the sound of an external device through the built-in
speakers of the Electone (page 189)

6 AUX OUT (Phone; L/L+R, R) jacks
This pair of stereo outputs is for connection to an
external amplifier/speaker system.
The output level can be controlled with the MASTER
VOLUME dial.
Reference pages
• Playing the sounds of the Electone through an external audio
system (page 187)
• Recording the sounds of the Electone to an external recorder
(page 188)

7 AUX OUT (RCA; L, R) jacks (LEVEL FIXED)
This set of stereo outputs is for connection to an external
amplifier/speaker. The output level is fixed and cannot be
controlled.

The ELS-02 series features a USB Dock built into the left
front of the keyboard unit, containing two [USB TO
DEVICE] terminals. Since the USB Dock opens slightly
(more than 10mm) when it is pushed gently, pull it open
all the way and connect the USB flash drive to one of the
[USB TO DEVICE] terminals.
CAUTION
While playing the keyboard, make sure to close the USB
Dock. Otherwise, your hand may hit the Dock, causing injury
and/or damage to the Dock or USB flash drive. Furthermore,
make sure to remove the cap or strap of the USB flash drive
in order to be able to close the USB Dock firmly.

NOTICE
• Never connect a USB device which is physically larger
than the inside of the USB Dock, to avoid damaging the
USB flash drive and/or the Dock.
• Never strap or hang anything onto the USB Dock or apply
any load or force to the Dock, to avoid damaging it.

NOTE
• Only a USB flash drive can be connected to each of the [USB TO
DEVICE] terminals in the USB Dock.
• An ELS-01 series instrument with an installed STAGEA Vitalize unit
does not have a USB Dock installed.

186

ELS-02/ELS-02C Owner’s Manual

Connection Examples – External Devices

9 [USB TO DEVICE] terminals
For details on [USB TO DEVICE] terminal, see page 110.

Connection Examples –
External Devices

USB Dock

CAUTION
Before connecting the Electone to other electronic
components, turn off the power to all the components.
Before turning the power of the components on or off, set all
volume levels to minimum (0). Otherwise, electrical shock or
damage to the components may occur.

) [USB TO HOST] terminal
This terminal can be connected to the USB terminal of
the computer using the USB cable. (The USB-MIDI
driver is necessary for the connection.)
Reference page
• Connection with Computer (page 191)

USB

Using headphones
To use headphones, connect them to one of the PHONES
jacks (standard 1/4" phone jacks). Two people can enjoy
listening to the Electone together by connecting two pairs
of headphones to the two jacks.

USB is an abbreviation for Universal Serial Bus. It is a
serial interface for connecting a computer with
peripheral devices.

! MIDI IN/OUT terminals

PHONES

For connecting external MIDI devices such a synthesizer
or sequencer. You can also use these to connect with a
computer that has a MIDI Interface.
Reference pages
• Controlling external MIDI devices from the Electone
(page 190)
• Controlling the Electone from an external device (page 190)
• Connection with Computer (page 191)

Playing the sounds of the Electone
through an external audio system

AUX OUT L/L+R

Speaker (Left)

13
Connections

By using the AUX OUT jacks, you can connect your
Electone to external speakers. If you’re connecting the
Electone to a mono device, use only the AUX OUT L/
L+R jack (standard phone).

Speaker (Right)

ELS-02/ELS-02C Owner’s Manual

187

Connection Examples – External Devices

Connection example: Using a mixer for
live performance
Generally, when you use the Electone on stage (in
concert, etc.), you should connect it to a mixer. By
using a mixer, you can easily adjust the volume and
tone quality of each component.
To connect to a mixer, use the AUX OUT jacks of the
Electone. The Electone features different types of
AUX OUT jacks, allowing you to choose the
appropriate one for your specific application.
Jacks

Output Type

Location

AUX OUT phone jacks
L/L+R, R

Balanced*
Level is controlled
with the MASTER
VOLUME dial.

Left underside of
the keyboard

AUX OUT RCA pin jacks
L, R

Unbalanced*
LEVEL FIXED

Left underside of
the keyboard

*The balanced connection is best for long cable runs, or for
low-level signals, since it picks up less noise than
unbalanced lines.
Main Speakers
(ex. Powered-amp Speakers)
Monitor
Speakers
Sound

Power-on procedure
Before turning the power on to all components, set all
volume levels to minimum (0) then turn on the
power in the following order:
(1) Electone and external keyboard(s)
(2) Mixer
(3) Powered Speaker
To turn the power off, first turn down the volume for
each device, then turn off the power in the reverse
order (3 → 2 → 1).

Recording the sounds of the
Electone to an external recorder
By using the AUX OUT jacks, you can record your
performance sound to an external audio recorder. When
connecting, use either the pin jack or phone jack
depending on the particular type of the cable’s jack.

Sound

Sound
Keyboards

Sound
AUX OUT
External recorder

Audio cable
MIC/LINE IN
MIC.

Sound

Recording

Mixer

NOTE
AUX OUT

STAGEA

188

ELS-02/ELS-02C Owner’s Manual

If you want to record the sound input from the AUX IN jack
together with the Electone sound, use the AUX OUT standard
phone jack on the underside of the keyboard.

Connection Examples – External Devices

Outputting the sound of an
external device through the
built-in speakers of the Electone

By connecting a cable from the external audio device to
the AUX IN jacks, you can play back the sound of the
external device via the speakers of the Electone.

Set the MIC./LINE switch to the MIC
position when connecting a
microphone, or the LINE position when
connecting a guitar or other high-level
output device.
MIC. LINE

MIC. LINE

When connecting
a microphone

When connecting
a guitar

NOTE
When you’re not sure which position is the best, first set it
to LINE. If the output level is too low, switch to the MIC
position.

AUX IN

External audio device

Use the INPUT VOLUME knob to set the
microphone volume.
INPUT
VOLUME

Playback sound

MIN

MAX

NOTICE
To avoid damage to the devices, first turn on the power to
the external device, then to the instrument. When turning off
the power, first turn off the power to the instrument, then to
the external device.

NOTE

To adjust the volume/reverb:

• Use audio cables and adaptor plugs having no (zero) resistance.
• The instrument’s [MASTER VOLUME] setting affects the input
signal from the [AUX IN] jack.

1
2

Connecting a microphone or
guitar

Using the MIC. REVERB and VOLUME
sliders in the GLOBAL Page, adjust the
amount of the reverb applied to the
microphone, and the volume.
Reference page
• Reverb (page 46)

13
Connections

By connecting a microphone to the Electone, you can
enjoy singing along with your own performance. The
Electone outputs your vocals or guitar sounds through
the built-in speakers.

Press the [UTILITY] button on the panel
to call up the Utility display.

Connect your microphone to the MIC./
LINE IN jack (standard 1/4"phone jack).
A dynamic microphone is recommended.

MIC./LINE IN

No sound from the microphone can be heard even
though you raise the volume here, unless you turn
the INPUT VOLUME knob to the right. Similarly,
no reverb can be heard even though you raise the
reverb level here, unless you raise the total reverb
level with the panel REVERB control.

ELS-02/ELS-02C Owner’s Manual

189

Connection Examples – External Devices

Controlling external MIDI devices
from the Electone

Controlling the Electone from an
external device

You can use the Electone to remotely play the Voices of a
MIDI keyboard (or tone generator), combining them
with the Electone and letting you create even richer, more
multi-layered sound textures. (The MIDI receive
channels of the MIDI keyboard must match the transmit
channels on your Electone.)
The Electone transmits as digital data a variety of
performance messages along with note information,
including values that indicate how far the expression
pedal is pressed down and how hard you play the
keyboard. How the connected external device responds
to these messages depends on the particular device.

You can use an external MIDI keyboard or sequencer to
remotely play the sounds of your Electone and change its
Registrations. (You will need to set the MIDI transmit
channels of the MIDI keyboard to match the fixed receive
channels on your Electone.)

MIDI IN
MIDI keyboard or synthesizer

MIDI OUT
MIDI cable
External MIDI device

MIDI OUT

MIDI IN
MIDI cable
MIDI messages

If you use both the [USB TO HOST] terminal and MIDI
terminals simultaneously, MIDI communication will be
available only via the [USB TO HOST] terminal, and the
MIDI terminal cannot be used.
NOTE
When you are using the MDR, MIDI data cannot be transmitted.

190

ELS-02/ELS-02C Owner’s Manual

MIDI messages

Connection with Computer

Connection with Computer
By using the [USB TO HOST] terminal or MIDI
terminals, you can connect the Electone and computer
enabling the MIDI communication between both. Install
the USB-MIDI driver to your computer, then make the
MIDI connection between the Electone and computer.
Regarding the USB-MIDI driver, you can download the
latest version from the Yamaha website:
http://download.yamaha.com/
Connecting your Electone to a computer opens up a
whole new world of musical possibilities. You can save
your original Songs to computer and create notation
(score writing application or sequencing software is
needed), and even upload your original Electone Song
data to your own website, to promote your talents or
share Songs with your friends. You can also control the
Electone from the computer, for example, by playing a
MIDI file on the computer to play back the sounds of
your Electone.
NOTE
When you are using the MDR, MIDI data cannot be transferred
from the computer.

Connecting to a Computer ([USB
TO HOST] terminal)
The [USB TO HOST] terminal of the Electone can be
connected to the USB terminal of the computer using a
USB cable.
Computer

Precautions when using the [USB TO
HOST] terminal
When connecting the computer to the [USB TO HOST]
terminal, make sure to observe the following points. Failing
to do so risks freezing the computer and corrupting or
losing the data. If the computer or the instrument freezes,
restart the application software or the computer OS, or turn
the power to the instrument off then on again.
NOTICE
• Use an AB type USB cable of less than 3 meters. USB
3.0 cables cannot be used.
• Before connecting the computer to the [USB TO
HOST] terminal, exit from any power-saving mode of
the computer (such as suspend, sleep, standby).
• Before turning on the power to the instrument,
connect the computer to the [USB TO HOST] terminal
• Execute the following before turning the power to the
instrument on/off or plugging/unplugging the USB
cable to/from the [USB TO HOST] terminal.
- Quit any open application software on the computer.
- Make sure that data is not being transmitted from
the instrument. (Data is transmitted only by playing
notes on the keyboard or playing back a Song.)
• While the computer is connected to the instrument,
you should wait for six seconds or more between
these operations: (1) when turning the power of the
instrument off then on again, or (2) when alternately
connecting/disconnecting the USB cable.

Connecting to a Computer (MIDI
terminal)

USB TO HOST
Computer

USB cable

If you use both the [USB TO HOST] terminal and MIDI
terminals simultaneously, MIDI communication will be
available only via the [USB TO HOST] terminal, and the
MIDI terminal cannot be used.

13
Connections

By using an optional MIDI interface such as the UX16,
you can connect the Electone to the computer, with the
MIDI IN/OUT terminals on the instrument. Connect the
Electone and the MIDI Interface with two standard MIDI
cables (one connecting the OUT terminal on the Electone
to the MIDI IN terminal on the interface, and the other
connecting the IN terminal on the Electone to the MIDI
OUT terminal on the interface). Connect the MIDI
interface to the computer with a USB cable.

IN OUT
MIDI

MIDI OUT

MIDI IN

MIDI Interface
(for example, UX16)

ELS-02/ELS-02C Owner’s Manual

191

MIDI Control
NOTE

MIDI Control

If you set Second Expression to on in the MIDI OUT FILTER
parameters, the setting in the OUTPUT (1) parameters will be
disabled.

When you connect your Electone with a second MIDI
device (such as a synthesizer or computer), you can
determine how the Electone controls that MIDI device,
or how the Electone is controlled.

1
2

3 INTERNAL/EXTERNAL
Switches control over the displayed items between the
Electone (INTERNAL) or the connected device
(EXTERNAL).

Press the [UTILITY] button in the panel
to call up the Utility display.

3 -1 LEAD 1

Press the [MIDI] button at the top right
of the display to call up the MIDI Page.

INT. (Internal): Lead Voice 1 is played from the
Upper keyboard of the Electone. (If the To Lower
function is on, it is played from the Lower
keyboard.)

Determines Internal or External control of the Lead
Voices.

EXT. (External): Lead Voice 1 is played from the
connected instrument via MIDI channel 4.

3 -2 SYNC.
2

3-1 3-2 3-3

1 OUTPUT
For setting the channels over which MIDI information
will be transmitted. Any channel from 1 through 16 can
be assigned to each keyboard (the Upper keyboard, the
Lower keyboard and the Pedalboard) as well as the
Expression pedal and 2nd Expression pedal. The MIDI
messages for each keyboard and Expression pedal will be
sent on the channels set here. You must set the transmit
channel here to match the receive channel of the
connected device. (The ELS-02 does not show the 2nd
Expression pedal.)
Pressing each OUTPUT button calls up the channel
selection pop-up menu. After you select the desired
channel, the pop-up menu automatically closes.
The Expression pedal and 2nd Expression pedal can be
set to “OFF” (MIDI information will not be transmitted).
On the 2nd Expression pedal, CC#4 by which MIDI
information is output as Second Expression can be also
set.

2 MIDI OUT FILTER
Deletes unnecessary MIDI data and keeps it from being
transmitted from the Electone. After Touch and Rhythm
start/stop are automatically filtered on the ELS-02.
In addition, Horizontal Touch and Second Expression are
automatically filtered on the ELS-02C. Set the parameter
for which you wish to disable transmission to ON.

192

ELS-02/ELS-02C Owner’s Manual

To synchronize playback with an external MIDI
device, you can use either the instrument's internal
clock (INT.) or MIDI clock signals from the external
device (EXT.).
INT. (Internal): The instrument uses its own
internal clock.
EXT. (External): The instrument uses MIDI clock
signals from the external device (MIDI).

3 -3 EXPRESSION
Determines the control of the expression pedal
functions. Ordinarily, this control is set to AUTO.
AUTO: Internal and External is automatically
switched.
INT. (Internal): You can manually control the
expression pedal even during MDR playback.
EXT. (External): While playing the MDR or
receiving MIDI messages, the expression pedal is
invalid. (The volume is controlled by the recorded
data in a USB flash drive or received MIDI data.)

Connecting to an iPhone/iPad

Connecting to an iPhone/
iPad
You can connect a smart device such as an iPhone or iPad
to the instrument. By using an application tool on your
smart device, you can take advantage of convenient
functions and get more enjoyment out of this instrument.
For details on connections, refer to the “iPhone/iPad
Connection Manual” on the website.
http://download.yamaha.com/
For information about compatible smart devices and
application tools, access the following page:
http://www.yamaha.com/kbdapps/

Connection with a USB wireless LAN
adaptor (sold separately)
The USB wireless LAN adaptor lets you connect the
Electone to an iPhone/iPad wirelessly. For details about
the USB wireless LAN adaptor, contact your nearest
Yamaha representative or the distributor listed at the end
(or beginning) of this manual. Or you can access the
following website and contact Yamaha support at your
location.

Wireless LAN settings
Start wireless connection according to the instructions in
the “iPhone/iPad Connection Manual” on the website,
then make sure to make appropriate setups from the
following instructions: “Automatic Setup by WPS,”
“Displaying available networks in the wireless LAN and
connecting to a network,” “Manual Setup” or
“Connecting by the Ad Hoc Mode.” Refer to pages 194 –
197 in this Manual, then set up as required.
If there is no access point, follow the instructions in
“Connecting by the Ad Hoc Mode” (page 197).
Reference Page
• Wireless LAN Detailed Settings (page 198)
• Initialize the wireless LAN settings (page 200)

NOTICE
• When you use the instrument along with an application on
your iPhone/iPad, we recommend that you first set
“Airplane Mode” to “ON” then set “Wi-Fi” to “ON” on your
iPhone/iPad in order to avoid noise caused by
communication.
• Do not place your iPhone/ iPad in an unstable position.
Doing so may cause the device to fall and result in
damage.

NOTE
Before using the [USB TO DEVICE] terminal, be sure to read
“Precautions when using the [USB TO DEVICE] terminal” on
page 110 in chapter 7.

http://www.yamaha.com/contact/
To enable a wireless connection between the Electone and
an iPhone/iPad, follow the instructions in the “iPhone/
iPad Connection Manual” on the website, and also refer
back to “Wireless LAN settings” in this manual for the
specific Wireless LAN settings you’ll need to make for
wireless connection.
NOTE
MIDI and [USB TO HOST] terminals are automatically disabled
when the USB wireless LAN adaptor is connected.

13
Connections

ELS-02/ELS-02C Owner’s Manual

193

Connecting to an iPhone/iPad

Automatic Setup by WPS
If your access point supports WPS, you can easily connect
the instrument to access point by WPS, without making
settings, such as key input, etc.

The “Connected” indication appears when
connection between the instrument and the access
point is successful.

NOTE
Check whether your access point supports WPS by referring to
the owner’s manual for the access point you are using.

1
2

Press the [OK] button to start WPS
setup, then press the WPS button on
your access point within two minutes.

“Connected” indication appears.

Connect the USB wireless LAN adaptor.
Press the [UTILITY] button, then press
the [WIRELESS LAN] button on the
display to call up the WIRELESS LAN
Page.
DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

Wireless LAN mode

Make sure that the wireless LAN mode
is set to Infrastructure Mode.
If the wireless LAN mode is set to Ad Hoc Mode,
press the [MODE CHANGE] button in the display
to switch to the Infrastructure Mode (page 197).

Press the [WPS] button in the
WIRELESS LAN Page.
A message appears prompting confirmation of
operation. You can cancel the operation at this point
by pressing the [CANCEL] button.

194

ELS-02/ELS-02C Owner’s Manual

After successfully enabling connection
between the instrument and the access
point, connect the iPhone/iPad to the
access point by referring to the
“iPhone/iPad Connection Manual.”

Connecting to an iPhone/iPad

Displaying available networks in the
wireless LAN and connecting to a
network

Select the desired network by pressing
the button shown the name of the
network in the display.

Select the desired Network for connection from the
Network list in the display by following the steps below.

For a network without a lock icon:

For a network with a lock icon:

Connecting starts.

Connect the USB wireless LAN adaptor.

You need to enter the proper password, which is
identical to that in the settings on the Access Point.
For details on how to enter characters, refer to the
“Changing the Song Name” on page 116. After
entering the password, press the [OK] button in the
display to finalize the setting. This operation starts
connecting automatically.

Press the [UTILITY] button, then press
the [WIRELESS LAN] button on the
display to call up the WIRELESS LAN
Page.
DISPLAY SELECT
VOICE
DISPLAY

A.B.C.
M.O.C.

MDR

FOOT
SWITCH

UTILITY

AUDIO

The “Connected” indication appears when the instrument
and the access point have been successfully connected.

RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE

U.ORGAN
FLUTES

L.ORGAN ROTARY SP
SPEED
FLUTES

Wireless LAN mode

After successfully enabling connection
between the instrument and the access
point, connect the iPhone/iPad to the
access point by referring to the
“iPhone/iPad Connection Manual.”

Make sure that the wireless LAN mode
setting is Infrastructure Mode.

Connections

When the wireless LAN mode is Ad Hoc mode,
press the [MODE CHANGE] button in the display
to switch to the Infrastructure Mode (page 197).

Press the [UPDATE] button in the
display to call up the network list.
For a network with a lock icon (
enter the proper password.

), you need to

ELS-02/ELS-02C Owner’s Manual

195

Connecting to an iPhone/iPad

Manual Setup

SECURITY

If you cannot find the desired network on the display, it
may be a network that is closed or hidden. In this case,
you will need to manually input SSID, Security and
Password settings for connection.

Press the [SECURITY] button in the display to call
up the display for security select, then press either
the [NONE], [WPA2-PSK (AES)] or [WEP] button.

NOTE

Press the [PASSWORD] button to call up the display
for Password input, then set the password in the
same way as SSID. Press the [OK] button to finalize
the setting.

PASSWORD

About the confirmation and changes in the access point
settings, refer to the manual of the access point.

Perform the same operation as in steps
1 – 3 in the “Displaying available
networks in the wireless LAN and
connecting to a network” instructions
on page 195.

NOTE
The password cannot be set when you select [NONE] for
the security setting.

Press to select [OTHER] at the bottom of
the network list.

The “Connected” indication appears when the
instrument and the access point have been
successfully connected.

The OTHER NETWORK display will be shown.

Set the SSID, Security and Password to
the same as the settings on the access
point.
Set the same contents with the setting contents by
the access point side.

SSID
Press the [SSID] button in the display to call up the
display for SSID input, then enter the SSID. For
details on how to enter the characters, refer to the
“Changing the Song Name” on page 116. Up to 32
characters (half size), alphanumeric characters,
marks can be entered. After entering the SSID, press
the [OK] button to finalize the setting.

196

ELS-02/ELS-02C Owner’s Manual

Press the [CONNECT] button to start
connection.

After successfully enabling connection
between the instrument and the access
point, connect the iPhone/iPad to the
access point by referring to the
“iPhone/iPad Connection Manual.”

Connecting to an iPhone/iPad

Connecting by the Ad Hoc Mode

Set the Wireless LAN mode to “Ad Hoc
Mode.”
Refer to “Wireless LAN Mode.”

The settings for the instrument are
complete if you do not need to change
the SSID and so on. Connect the
iPhone/iPad to the instrument by
referring to the “iPhone/iPad
Connection Manual.”
You can change the SSID, Security, etc. from the
DETAIL display.
Reference Page
• Wireless LAN Detailed Settings (page 198)

Wireless LAN Mode

Perform the same operation as in steps
1 – 3 in the “Displaying available
networks in the wireless LAN and
connecting to a network” instructions
on page 195.
Set the Wireless LAN mode.
You can set between two modes:
INFRASTRUCTURE and AD HOC. Press the
[MODE CHANGE] button on the display to call up
a message prompting confirmation of the operation,
then press the [OK] button to execute the operation.

13
Connections

ELS-02/ELS-02C Owner’s Manual

197

Connecting to an iPhone/iPad

Wireless LAN Detailed Settings
You can set the detailed settings for each mode: INFRASTRUCTURE and AD HOC. There is no need to change or make
any settings if you’ve enabled connection between the iPhone/iPad and instrument.
Reference Page
• Wireless LAN Mode (page 197)

Set the Wireless LAN mode, then call up the display for detailed settings by pressing the
[DETAIL] button in the WIRELESS LAN display.
INFRASTRUCTURE mode

AD HOC mode

DETAIL (IP ADDRESS)

DETAIL (WIRELESS)

DETAIL (OTHER)

DETAIL (IP ADDRESS)

DETAIL (OTHER)

198

ELS-02/ELS-02C Owner’s Manual

Connecting to an iPhone/iPad

As necessary, set the detailed settings.
Wireless LAN mode

INFRASTRUCTURE
mode

AD HOC mode

Display
DETAIL
(IP ADDRESS)
display

DETAIL
(WIRELESS)
display

DETAIL
(IP ADDRESS)
display

Item
DHCP

DETAIL (OTHER)
display

0.0.0.0

SUBNET MASK

0.0.0.0

GATEWAY

0.0.0.0

DNS SERVER 1

0.0.0.0

DNS SERVER 2

0.0.0.0

SSID

ap-(model name,
such as “ELS-02C”)(last 6 characters of
MAC address in
lowercase); or simply
“ap-(model name),” if
MAC address cannot
be used.

CHANNEL

SECURITY

–

PASSWORD

–

DHCP
IP ADDRESS

HOST NAME

ON
192.168.0.1

Setting/Input
Determines whether or not DHCP is
used. If your router is compatible with
DHCP, select [ON] (set DNS
automatically) here.
Select on or off by pressing [ON] or
[OFF] button on the display.
Set the wireless LAN detailed settings.
IP Address, Subnet Mask, Gateway,
DNS Server1, DNS Server2 can be set
when DHCP is set to Off but cannot be
set when DHCP set to On. For details on
confirmation and changes in the setting
of the access point on the router side,
refer to the owner’s manual for the
product you are using.
For details on how to enter characters,
refer to the instructions “Changing the
Song Name” on page 116. The setting
range is 0.0.0.0 – 255.255.255.255.
To find the specific MAC address, see
“MAC address” below.
• SSID, Security and Password can be set
in the same way as those described in
the section “Manual Setup” on
page 196. The last 6 characters of the
MAC address must be entered in
lowercase.
• Press the number button which appears
by pressing the [CHANNEL] button on
the display then, select the channel.
• DHCP and IP Address can be set in the
same way as those of
INFRASTRUCTURE mode in this table.
• Subnet Mask can be selected in the list.

255.255.255.0
Set the Host name. Up to 57 characters
(half size) including alphanumeric
characters, the “_” (underscore) and “-”
(hyphen) character. For details on how
to enter characters, refer to the
instructions “Changing the Song Name”
on page 116. After entering the
characters, press the [OK] button on the
display to finalize the setting.
The last 6 characters of the MAC
address must be entered in lowercase.

–

Shows the MAC address of the USB
wireless LAN adaptor. You cannot
change the MAC address here.

LAN DRIVER
VERSION

–

This only displays the version of the LAN
driver; the setting cannot be made.

00000000

13
Connections

(Model name, such
as “ELS-02C”)-(last 6
characters of MAC
address in
lowercase); or simply
“(model name),” if
MAC address cannot
be used.

MAC ADDRESS

STATUS

IP ADDRESS

SUBNET MASK
INFRASTRUCTURE
mode / AD HOC mode

Default setting

Shows the error code of network
function. “00000000” means no error.

Save the settings.
Set the detailed settings, then press the [SAVE] button on the display. When the saving operation is completed, the
detailed settings display returns to the previous display.

ELS-02/ELS-02C Owner’s Manual

199

Connecting to an iPhone/iPad

Initialize the wireless LAN settings
“Factory Set (Initializing the Electone)” on page 23 in chapter 1 does not affect the wireless LAN settings, which can be
initialized by the following procedure. Be careful when executing initialize, since it erases all the wireless LAN settings
and replaces them with the factory defaults.

Press the [UTILITY] button, then press the [WIRELESS LAN] button on the display to call
up the WIRELESS LAN Page.

Initialize the wireless LAN settings.
Press the [INITIALIZE] button on the display. A message appears prompting confirmation of operation.
Press the [OK] button to execute the operation, or the [CANCEL] button to cancel.

Glossary of Terms

200

Access point

A device which acts as a base station when transmitting data by wireless LAN.
Some access points are combined with modem functions.

Ad Hoc mode

Communication method for performing data communication with the terminal and other devices directly
without using a relay device, such as an access point of a wireless LAN.

DHCP

A standard or protocol by which IP addresses and other low-level network configuration information can
be dynamically and automatically assigned each time the computer and the instrument connect to the
Internet.

DNS server

A server that maps names to actual IP addresses of devices connected to a network.

Gateway

A Gateway is a link between two computer programs or systems.

Infrastructure mode

Communication method for performing data communication with each terminal via a relay device, such
as an access point of the wireless LAN.

IP address

A string of numbers assigned to each computer connected to a network that indicate the device’s
location on the network.

LAN

Short for Local Area Network, this is a data-transfer network that connects a group of computers at a
single location (such as an office or home) by means of a special cable.

Router

A device that allows multiple devices (e.g., computers, your Yamaha instrument) to share the same
Internet connection.

Site

Short for “website,” this refers to the group of web pages that are opened together. For example, the
collection of web pages whose addresses begin with “http://www.yamaha.com/” is referred to as the
Yamaha site.

SSID

A name used to identify a particular access point, or the wireless networks set as the access point.

Subnet mask

The structure for dividing a large-scale network.

Wireless LAN

A LAN connection that allows data transfer through a wireless, cable-free connection.

WPS

A structure to easily make a setting of wireless LAN by pushing only the WPS buttons of an access point
and the wireless LAN device.

ELS-02/ELS-02C Owner’s Manual

14 Appendix
Troubleshooting
Problem

Possible Cause and Solution

GENERAL OPERATION
A click or pop is heard when the power is
turned on or off.

Electrical current is being applied to the instrument. This is normal.

The sound is not heard for about 10 seconds
after turning the power on.

This is normal; the Electone takes a while to start up.

A cracking noise is sometimes heard.

Noise may be produced when either an electrical appliance is turned on or an
electric power tool (such as drill) is used in the proximity of the Electone. If this
occurs, plug the Electone into an electrical outlet located as far as possible from the
device that seems to be the source of the problem.

Interference from radio, TV, or other sources
occurs.

This is caused by the proximity of a high-power broadcasting station, an amateur
ham radio setup or a mobile phone.

The sound of the Electone causes
surrounding objects to resonate.

Because the Electone is capable of producing powerful bass sounds, resonance
may be caused in surrounding objects, such as cabinets or glass windows. To avoid
this, relocate the objects or lower the Electone’s volume.

In the LCD display, there are some black
points (unlit) or white points (always lit).

Unfortunately, this is a common characteristic of TFT-LCDs.

Some buttons on the panel do not respond.

The UPPER/LOWER ORGAN FLUTES and LEAD VOICE 2 buttons are invalid on the
ELS-02. If you upgrade the ELS-02 to the ELS-02C, these buttons can be used.

Some of the LEDs in the DISPLAY SELECT
section do not light.

The LEDs of on/off buttons (UPPER/LOWER ORGAN FLUTES, VOICE EDIT, RHYTHM
PROGRAM, and ROTARY SP SPEED) are lit when those functions are turned on. The
LEDs of other function’s buttons momentarily light when the functions are selected.

The sound is too small even when the
volume is set to its maximum.

• The Master Volume may be set around the minimum position. Turn it clockwise.
• The Expression Pedal may not be pressed down. Press it down with your toe.
• The POWER switch of the speaker may have been turned off. Turn it on.
• (For the ELS-02C) The REAR SPEAKER switch may have been set to OFF. Switch it
to ON.

The Electone panel does not function
normally or the content of the memorized
data has changed.

This happens very rarely. Occasionally, power surges and spikes due to electrical
storms or other reasons may cause the Electone to malfunction and/or alter the
contents of memorized data. If this happens, perform the Factory Set operation to
reset the Electone (page 23).

VOICES/RHYTHMS
This may occur when you compare the Electone’s sounds with that of a piano.
Because of the difference of the harmonics structure, the tuning system of the
Electone is different from the piano in the higher and lower ranges.

Some of the Voices may contain cracking
and/or noisy sounds.

You may find these mainly in the wind instrument Voices. These are purposely added
effects to the Voices to reproduce the characteristics of the wind instruments such as
the pipe vibrations, breath noises and squeaks.

When too many keys are pressed, not all of
the notes sound.

Total polyphonic capacity (notes sounding for both Upper and Lower Keyboards) is
14 notes. When you turn the Pedal Polyphonic mode to on, the total is 14 for all
keyboards, Upper, Lower and Pedalboard.

When sustain length is set to HOLD,
previously played notes are cut off.

Since the HOLD setting causes notes to keep sounding, the cumulative notes
(elements) may go over the maximum elements that the Electone can sound.
When this occurs, previously played notes are cut off.

ELS-02/ELS-02C Owner’s Manual

14
Appendix

The pitch may sound excessively high on
the Pedalboard and low in the higher
registers of the Lower and Upper keyboards.

201

Troubleshooting

Problem

Possible Cause and Solution

Only one sound is heard when two notes of
the Lead or Pedal Voices are simultaneously
played.

For practical performance reasons, the Electone has been designed so that only one
note of the Lead or Pedal Voices can be played at a time. If you want, the Pedal
Voice can be set to polyphonic mode (page 44).

The Pedal Voices do not sound, even though
the volume is properly set.

• The Single Finger or Fingered Chord mode of Auto Bass Chord is on. Turn off the
mode in the display (page 66).
• TO LOWER buttons in the Pedal Voice sections are turned on. Turn the function off
(page 27).

When selecting a User button Voice or
rhythm, the Voice or rhythm title at the top of
the LCD does not match the selected Voice
or rhythm.

The currently assigned Voice or rhythm is displayed at the top of the LCD, and
remains until another Voice or rhythm has been selected.

When keys are pressed, the sounds of
percussion instruments are also heard.

The Keyboard Percussion function has been turned on. When not using the function,
be sure to turn it off (page 68).

Even though a User button’s rhythm has
been selected and started, the pattern does
not sound.

Since the User buttons contain User rhythms, no rhythm will sound if a pattern has
not been saved to the selected User button.

EFFECTS
The Touch Tone function does not operate.

Adjust the Touch Tone settings in the Voice Condition display (page 43).

The Reverb effect is not applied to the
desired Voice sections, even when the
REVERB button setting on the panel is
increased.

Increase the Reverb depth for the desired Voice sections in Reverb display Pages 2
– 4.

The Rotary Speaker effect cannot be heard,
even when the [ROTARY SP SPEED] button
in the DISPLAY SELECT section is on.

Rotary Speaker must be selected first in Voice Condition display Pages 3 and/or 4
(for panel Voices), or in the Organ Flute Voices ATTACK/VOLUME Page (for Organ
Flute Voices).

ACCOMPANIMENT
The pitch in the Single Finger mode does not
change, even when pressing different keys
of the keyboard.

Single Finger mode will only produce notes when played within a fixed octave
interval on the Lower keyboard. If notes with the same letter name are pressed
outside of that range, the chords that are sounded will share the same pitch.

While an Intro/Ending pattern is
automatically playing, the Lower keyboard
does not produce any sound, even when the
keys are played.

Since the Accompaniment chords play automatically one after another, the Lower
keyboard is designed not to produce any sound during the playback of an Intro/
Ending pattern.

The Accompaniment cannot be heard even
when an appropriate Accompaniment type
is selected and the rhythm has been started.

• The Accompaniment volume may have been set to 0. Be sure to raise the
Accompaniment volume in the Rhythm Condition display (page 65).

The harmony notes of the Melody On Chord
function cannot be heard.

The Upper keyboard has been set to sound only Lead Voices. Increase the volume
of the Upper Keyboard Voices.

The bass phrase of the Auto Bass Chord
cannot be heard.

The pedal polyphonic mode may be set to on. Turn it off in the Voice Condition
display (page 44).

• All Accompaniment parts may be set to off (mute). Set the desired part on
(page 65).

REGISTRATION MEMORY
Certain functions have not been memorized
to Registration Memory.

Some functions cannot be memorized. Refer to page 95.

VOICE EDITING

202

The Voice Edit display cannot be called up
even when the [VOICE EDIT] button is
pressed.

The Voice Edit display cannot called up by pressing only the [VOICE EDIT] button.
While holding down the [VOICE EDIT] button, press the desired Voice button.

During Voice editing, the specified Voice
isn’t heard, even when the keyboard is
played.

• The Element is turned to mute or its level is set to minimum. Turn it to on or
increase the volume.

ELS-02/ELS-02C Owner’s Manual

• You may have played keys outside the range of Note Limit. Play only keys within
the Note Limit range.

Troubleshooting

Problem

Possible Cause and Solution

An error message appears while the Voice
name is entered.

Voice name capacity is 16 characters. Delete the unnecessary letters or spaces.

RHYTHM PROGRAM
During use of the Rhythm Pattern Program,
no sound is produced even when you play a
certain percussion sound.

If percussion sounds have been recorded while memory is full, no subsequently
selected instruments can be heard or recorded. If necessary, erase some of the less
necessary percussion sounds and play again.

MUSIC DATA RECORDER
The USB flash drive is not recognized.

Check whether the connected USB flash drive is supported or not from the website
below:
http://download.yamaha.com/

Recording or playback cannot be
performed.

• The part buttons in the Rec Standby display or Playing display may have been
turned off. Turn the desired part to REC or PLAY.
• The performance data is too large. The maximum limit for recording performance
data is 1 MB.

Recording is stopped before the
performance is finished.

• The amount of recorded data on the USB flash drive is close to the maximum limit.
Either use another USB flash drive or delete the data of unnecessary Songs.
• When you overwrite the Song, the length of a subsequently recorded part cannot
exceed the length of the previously recorded parts. Delete the previously recorded
Song, then record again (page 128)
• The performance data is too large. The maximum limit for recording performance
data is 1 MB.

An error message appears while entering a
folder name or Song name.

• The folder/Song name is too long. The capacity is 50 letters.
• The folder/Song name may be an invalid name. Refer to page 117.
• The path name is too long. The capacity of the path name is 234 letters. Reduce
the layer or shorten the folder/Song name to shorten the path.

The rhythm does not start at the beginning of
a recording, or stops in the middle of the
performance.

The MDR is designed so that the rhythm cannot be started at the very beginning of a
recording. If you wish to use the rhythm, start it after the time indicator appears in the
display.

The notes of the recording are “stuck” and
sound continuously.

During playback, you may have removed the USB flash drive. Whenever you wish to
stop playback, always press the [J] (Stop) button before removing the USB flash
drive.

14
Appendix

ELS-02/ELS-02C Owner’s Manual

203

Specifications

TONE GENERATION

ELS-02

ELS-02C

AWM

AWM/VA/ORGAN

KEYBOARD

Upper: 49 keys (C – C),
Lower: 49 keys (C – C),
Pedal: 20 keys (C – G)

Keyboard Type

Standard (FS)

Custom (FSV)

Initial Touch

Upper, Lower, Pedal

After Touch
Horizontal Touch
REGISTRATIONS

Registration Menu

Upper, Lower

Upper, Lower, Pedal

—

Upper, Lower

506

566

Registration Memory
Registration Shift
VOICE

Voice Sections

1 Unit 16 x 5
M. (Memory), 1 – 16, D. (Disable)
Shift, Jump, User (1 Unit: 400 steps), Next Unit
Upper 1, Upper 2, Lead 1, Lead 2, Lower 1, Lower 2, Pedal 1, Pedal 2

Voice Buttons Upper/Lower
Lead

Pedal
Preset Voices

STRINGS, BRASS, WOODWIND, TUTTI, PAD, SYNTH, PIANO, ORGAN, PERCUSSION,
GUITAR, CHOIR, WORLD, USER 1, USER 2
VIOLIN, SYNTH, FLUTE, TRUMPET,
USER 1, TO LOWER (Lead 1),
SOLO (Lead 2)

CONTRABASS, ELEC. BASS, TIMPANI, SYNTH BASS, USER 1, TO LOWER
AWM: 986

User Voices

Rotary Speaker Control
Sustain
Types

Voice Section Effects

Rhythm Buttons
Preset Rhythm Patterns
Parts
Sections

ACCOMPANIMENT

204

—

Types: Sine, Vintage, Euro
Footage: 16', 5 1/3', 8', 4', 2 2/3', 2',
1 3/5', 1 1/3', 1'
Attack: 4', 2 2/3', 2', Length, Response
Mode: First, Each
Vibrato: Depth, Speed
Effects: XG Rotary Sp, Rotary Sp 1 – 5,
2Way Rot Sp, Dual Rotsp 1 – 2,
Dual Rot Brt, Dual Rot Wrm,
Dist+Rot Sp, Odrv+Rot Sp,
Amp+Rot Sp, Dist+2Rot Sp,
Odrv+2Rop Sp, Amp+2Rot Sp, OFF
2.69 – 39.7 Hz, Slow, Stop
Upper (KNEE), Lower (KNEE), Pedal

Depth

RHYTHMS

AWM: 80, VA: 6 (each Unit)
Yes

Organ Flute Voices

Reverb
(Voice
Sections/
Rhythm)

AWM: 986, VA: 94

AWM:80 (each Unit)

Voice Link

EFFECT/CONDITION

VIOLIN, SYNTH, FLUTE, TRUMPET,
VA-ACOUSTIC, VA-VIRTUAL,
VA-ELECTRONIC, VA-CUSTOM,
USER 1, TO LOWER (Lead 1),
SOLO (Lead 2)

Accompaniment Parts

Hall 1 – 3, M, L, XG Hall 1 – 2,
Room 1 – 4 , S, M, L, XG Room 1 – 3,
Stage 1 – 2, XG Stage 1 – 2,
Plate 1 – 2, XG Plate, GM Plate,
White Room, Atmo Hall, Acostic Room, Drums Room, Perc Room, Tunnel, Canyon,
Basement
Upper 1 – 2, Lower 1 – 2, Lead 1 – 2, Pedal
1 – 2, Percussion, Accompaniment,
Keyboard Percussion

Upper 1 – 2, Lower 1 – 2, Lead 1 – 2, Pedal
1 – 2, Percussion, Accompaniment,
Keyboard Percussion,
Upper Organ Flute, Lower Organ Flute

Reverb, Delay, ER/Karaoke, Chorus, Flanger, Phaser, Tremolo/Auto Pan,
Rotary Speaker, Distortion, Distortion+, Amp Simulator, Wah, Dynamic,
EQ/Enhancer, Pitch Change, Miscellaneous, Thru
MARCH, WALTZ, SWING & JAZZ, POPS, R&B, LATIN, WORLD MUSIC, BALLAD, ROCK,
DANCE, USER 1, USER 2
634 (including the metronome)
Main Drum, Add Drum
Intro 1 – 3, Ending 1 – 3, Main/Fill In A – D, Break, Auto Fill
Chord 1, Chord 2, Pad, Phrase1, Phrase 2

Auto Bass Chord

OFF, Single Finger, Fingered Chord, Custom A.B.C.
Memory: Lower, Pedal

Melody On Chord

OFF, 1, 2, 3, Knee

ELS-02/ELS-02C Owner’s Manual

Specifications

ELS-02
PROGRAMS

ELS-02C

Voice Edit

Yes

Rhythm Pattern Program
Rhythm Sequence Program
Keyboard Percussion

CONTROLS

Footswitch

Left

Yes
1 Unit SEQ. 1 – 4 (Rhythm and Registration program)
1 Unit
Preset 1 – 2, User 1 – 40
(Pan, Pitch coarse, Pitch fine, Reverb, Volume)
Rhythm: Stop, Break, Main A – D, Intro 1 – 3, Ending 1 – 3
Glide: Upper 1, 2, Lower 1, 2, Lead 1, 2, Glide Time
Rotary Speaker

Right

Registration Shift

Expression Pedal
2nd Expression Pedal

Yes
Pitch Bend,
Tempo (set only, not controlled)

Pitch Bend, Tempo

Knee Lever

Sustain (Upper/Lower), M.O.C., Lead Slide, Solo (Lead 2)

Transpose

-6 – +6

Pitch

A = 427.2 – 452.6 Hz, Default value: A = 440 Hz

MIDI Control

Yes

Main Controls

POWER on/off, MASTER VOLUME

MDR

Search,
Song Select: Stop, Play, Pause, Rewind, Fast Forward, Record, Custom Play, Score,
Setting (Tempo/Part), Unit Edit
Tools: Create Folder, Change Song Name, Copy, Delete,
Conversion (XG/EL/ELS format), Format, Information

Audio Recording/Playback

Utility

Language (English/Japanese), Touch Panel Sound, LCD Brightness,
Mic. (Reverb/Volume), Disable Mode (Normal/Tempo), Initialize

Display Select

OTHERS

Display

Sound
System

Play: Stop, Play, Pause, Rewind, Fast Forward, Volume, Tempo, Pitch
Record: Stop, Record
Tools: Create Folder, Change Name, Copy, Delete, Format, Information
File Format: .wav (44.1kHz,16bit, stereo)

VOICE DISPLAY, A.B.C./M.O.C., MDR,
FOOTSWITCH, UTILITY, AUDIO,
VOICE EDIT,
RHYTHM PATTERN PROGRAM,
RHYTHM SEQUENCE PROGRAM,
ROTARY SP SPEED

VOICE DISPLAY, A.B.C./M.O.C., MDR,
FOOTSWITCH, UTILITY, AUDIO,
VOICE EDIT,
RHYTHM PATTERN PROGRAM,
RHYTHM SEQUENCE PROGRAM,
U. ORGAN FLUTES,
L. ORGAN FLUTES, ROTARY SP SPEED

Type

TFT Color Wide VGA LCD

Size

800 x 480 dots
7 inch

Power
Amplifiers

50W x 2

70W x 2

Cone: 13 cm x 2, 5 cm x 2
Monitor speaker: 6.6 cm x 2

Cone: 13 cm x 8
Dome: 2.5 cm x 4
Monitor speaker: 6.6 cm x 2

(According to
measurement
method
specified by
Yamaha)

Speakers

Storage

USB flash drive

Connectors

PHONES (2), AUX OUT: L/L+R, R (standard phone), L, R (Level Fixed: RCA),
AUX IN: L/L+R, R (standard phone), MIDI IN/OUT, USB TO HOST,
USB TO DEVICE (3; two terminals have been connected to the USB Dock),
MIC./LINE IN (jack, switch, and volume control)

Bench
Color
Supplied Accessories

1229 x 574 x 1017 (1276 with Music Rest)
mm, 102.5 kg

1229 x 574 x 1017 (1276 with Music Rest)
mm, 109.5 kg

781 x 305 x 618 mm, 8.8 kg
Silver Metallic

Appendix

Dimensions (W x D x H),
Weight

Bench, Owner’s Manual, Online Member Product Registration

*The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then
download the manual file. Since specifications, equipment or separately sold accessories may not be the same in every locale, please check with your
Yamaha dealer.

ELS-02/ELS-02C Owner’s Manual

205

Index

Index
Numerics

DISTORTION ........................................ 54

2nd Expression Pedal .........................182

DYNAMIC ............................................. 55

Jacks and Controls ............................ 185

A.B.C./M.O.C. .................................66, 67

EACH (Organ Flutes) ............................ 40

ACCENT ..............................................152

EFFECT ................................................. 45

Keyboard Percussion ........................... 68

Accompaniment ....................................65

Effect category (Voice) ......................... 45

Knee Lever ......................................... 180

Ad Hoc Mode ......................................197

Effect Parameters ................................. 46

Add Drum .............................................65

EFFECT TYPE (Organ Flutes) ............... 41

AEM ........................................................7

Effect type (Voice) ................................ 45

L. ORGAN FLUTE ................................ 40

AFTER touch (Pitch) ..............................44

Element ............................................... 138

LANGUAGE ......................................... 16

AFTER touch (Touch Tone) ...................43

ENDING .......................................... 57, 58

LAST (Lead Voice) ............................... 44

AMP SIMULATOR .................................55

Envelope Parameters ......................... 143

LAYER (Voice Edit) ............................ 140

ARTICULATION ....................................45

EQ (Equalizer) ............................ 140, 143

LCD BRIGHTNESS ............................... 17

ASSEMBLE .........................................149

EQ/ENHANCER (Effect) ....................... 55

LCD Display ......................................... 12

ATTACK (Organ Flutes) ........................40

ER/KARAOKE ....................................... 54

Lead Slide ............................................ 45

ATTACK RATE (Voice Edit) .........141, 143

Expression pedal .................................. 13

Lead Voice ........................................... 24

Audio ...................................................132

EXTERNAL .......................................... 192

LEAD VOICE (Panel) ............................ 11

JUMP .................................................... 99

LEVEL (Voice Edit) ..................... 141, 143

Audio Recording .................................132
Auto Bass Chord ...................................66

LFO (Low Frequency Oscillator) ........ 142

Auto Fill .................................................58

Factory Set ........................................... 23

Lower Keyboard Voice ......................... 24

AUX IN ................................................186

Fast forward ........................................ 122

LOWER KEYBOARD VOICE (Panel) .... 10

AUX OUT ............................................186

FEET ..................................................... 44

AUX OUT (LEVEL FIXED) ...................186

File ...................................................... 109

AWM (Voice Edit) ................................140

FILL IN .................................................. 57

[M.] (Memory) ...................................... 95

AWM Voice ...........................................39

Filter .................................................... 141

M.O.C. .................................................. 67

FINGERED CHORD .............................. 66

MAIN .................................................... 57

FIRST (Organ Flutes) ............................ 40

Main Drum ............................................ 65

Bank ......................................................98

FLANGER ............................................. 54

MASTER VOLUME ............................... 13

BAR/BEAT .............................................59

Folder ................................................. 109

MDR ................................................... 106

BREAK ..................................................57

FOOT SWITCH ............................. 99, 178

Melody On Chord ................................. 67

BRILLIANCE (Panel) .............................48

FOOTAGE ............................................. 40

MEMORY (A.B.C.) ................................ 67

Footswitch .......................................... 178

METRONOME .................................... 149

FORMAT (MDR) .................................. 111

MIC./LINE IN jack ............................... 185

C
CHANGE NAME (Song) ......................116

MIC./LINE switch ................................ 185

CHORD 1 ..............................................65

MIDI Control ....................................... 192

CHORD 2 ..............................................65

Gate Time ........................................... 157

MIDI IN/OUT ....................................... 187

CHORUS (Effect) ..................................54

Glide ................................................... 179

MIDI OUT FILTER ............................... 192

CHORUS (Rhythm Pattern Program) ..159

MISCELLANEOUS ............................... 55

Computer ............................................191

MODE (Organ Flutes) .......................... 40

CONVERT EL TO ELS .........................131

Headphones ....................................... 187

MODE (Rotary Speaker) ...................... 49

CONVERT ELS TO EL .........................130

HORIZONTAL touch ............................. 43

Music Data Recorder ......................... 106

CUSTOM A.B.C. ...................................67

CUTOFF FREQ. ...................................141

Infrastructure Mode ............................ 194

Next Page .......................................... 125

INITIAL touch ........................................ 43

Next Unit ............................................ 119

Initialize (Factory Set) ........................... 23

NEXT UNIT (Shift End) ....................... 100

[D.] (Disable) ........................................96

Initialize (Registration Memory) ............ 98

NOTE LIMIT ........................................ 141

DATA CONTROL dial ............................12

Initialize (Wireless LAN settings) ........ 200

NOTE SHIFT ....................................... 141

DECAY RATE ......................................143

INPUT VOLUME ................................. 185

DELAY (Effect) ......................................54

INTERNAL .......................................... 192

DELAY (Vibrato) ....................................44

INTRO ................................................... 58

Organ Flutes ........................................ 40

CONVERT TO XG ...............................129

DEPTH (Reverb) ...................................46
DEPTH (Vibrato) ....................................44
Display Select .......................................12

206

ELS-02/ELS-02C Owner’s Manual

OUTPUT (MIDI) .................................. 192

Index

Rhythmic Chord .................................. 156

User button (Rhythm) ........................... 60

PAD .......................................................65

ROTARY SP SPEED .............................. 49

User button (Voice) .............................. 28

PAN (Voice Edit) .................................141

Rotary Speaker ..................................... 49

User Keyboard Percussion .................. 81
User Rhythm ...................................... 161

PAN (Voice) ..........................................43
Part (Rhythm) ........................................65

User Voice .......................................... 144

PATTERN ............................................146

SCORE ............................................... 124

UTILITY ................................................ 16

Pause ..................................................122

Section .................................................. 57

Pedal polyphonic mode ........................44

SEQUENCE ........................................ 172

Pedal Voice ...........................................25

SETTINGS (MDR) ............................... 112

VA (Voice Edit) ................................... 143

PEDAL VOICE (Panel) ..........................11

SHIFT (Registration Shift) ..................... 99

VA Custom Voice ............................... 144

PHASER ................................................54

SHIFT END ......................................... 100

VA Voice ............................................... 39

PHONES .............................................185

SINGLE FINGER ................................... 66

PHRASE 1 .............................................65

SLIDE .................................................... 45

VARIATION (Rhythm Pattern Program)
............................................................ 160

PHRASE 2 .............................................65

SLOW (Rotary Speaker) ....................... 49

Version ................................................. 23

Pitch ....................................................184

SOLO .................................................... 27

VIBRATO .............................................. 44

PITCH (Voice section) ...........................43

Song ........................................... 109, 112

VIBRATO (Organ Flutes) ...................... 41

Pitch Bend ..........................................183

Song Copy .......................................... 126

Voice .................................................... 24

PITCH CHANGE ...................................55

Song Delete ........................................ 128

Voice button ......................................... 25

Playback .............................................121

Specifications ..................................... 204

Voice Condition .............................. 26, 43

POLY .....................................................44

SPEED (Rotary Speaker) ...................... 49

VOICE DISPLAY ................................... 17

Power switch .........................................13

SPEED (Vibrato) ................................... 45

Voice Edit ........................................... 138

PRESET (Vibrato) ..................................44

START ................................................... 57

VOICE EDIT (Panel) ........................... 139

Preset Keyboard Percussion ................68

Step Write ........................................... 150

Voice Link ....................................... 43, 50

PRESET TEMPO ....................................60

STOP (Rotary Speaker) ........................ 49

Voice Menu .......................................... 25

PRIORITY ..............................................44

STOP (Shift End) ................................. 100

Voice section ........................................ 24

Protected Song ...................................121

Style File Format ................................. 163

Volume (Accompaniment) ................... 65

Punch-in Recording ............................116

Super Articulation Voice ....................... 39

Volume (Keyboard Percussion) ........... 69

Sustain .................................................. 48

VOLUME (MIC.) ................................. 189

SUSTAIN (Panel) .................................. 48

VOLUME (Organ Flutes) ...................... 41

Quantize ..............................................155

SYNCHRO START ................................ 57

VOLUME (Rhythm Pattern Program) .. 159

Real Time Write ...........................150, 155

Tempo (MDR) ..................................... 123

Recording (Audio) ..............................132

TEMPO (Rhythm) .................................. 59

Recording (Lead Voice 1 Voice only) ..115

THRU (Effect) ....................................... 55

WAH ..................................................... 55

Recording (MDR) ................................114

TIME (Slide) .......................................... 45

Wireless LAN settings ........................ 193

Recording (Part) .................................115

TO LOWER ........................................... 27

WPS .................................................... 194

Registration Memory .............................95

TOP ....................................................... 44

REGISTRATION MENU .........................19

TOP (Lead Voice) ................................. 44

Registration Sequence .......................174

TOP (Shift End) ................................... 100

XG .......................................................... 7

Registration Shift ...................................99

TOUCH PANEL SOUND ....................... 16

RELEASE RATE (Voice Edit) .......141, 143

TOUCH TONE ...................................... 43

Remaining Memory Capacity .............162

TOUCH VIBRATO ................................. 45

Repeat ................................................123

Transpose ........................................... 184

Re-recording (Retry) ...........................114

TRANSPOSE (Voice section) ................ 46

RESONANCE ......................................141

TREMOLO/AUTO PAN ......................... 54

RESP. (Response) ................................40

TUNE (Voice section) ........................... 46

Reverb ..................................................46

TUNE FINE (Voice Edit) ...................... 141

VOLUME (Rhythm) ............................... 59
VOLUME (Voice) .................................. 26

14
Appendix

REVERB (MIC.) ...................................189
REVERB (Panel) ....................................46

REVERB (Rhythm Pattern Program) ...159

U. ORGAN FLUTES .............................. 40

Rewind ................................................122

Unit ....................................................... 98

Rhythm ..................................................56

UNIT EDIT (MDR) ............................... 118

Rhythm button .......................................56

Upper Keyboard Voice ......................... 24

Rhythm Clock ......................................152

UPPER KEYBOARD VOICE (Panel) ..... 10

Rhythm Condition .................................58

USB Dock ................................... 110, 186

Rhythm Menu ........................................56

USB flash drive ................................... 110

Rhythm Pattern Program .....................146

USB TO DEVICE ......................... 110, 187

Rhythm Program .................................146

USB TO HOST .................................... 187

Rhythm Sequence Program ................172

USER (Registration Shift) ...................... 99
USER (Vibrato) ..................................... 44

ELS-02/ELS-02C Owner’s Manual

207

About Using BSD-Licensed Software
The software used by this product includes components
that comply with the BSD license.
The restrictions placed on users of software released
under a typical BSD license are that if they redistribute
such software in any form, with or without modification,
they must include in the redistribution (1) a disclaimer of
liability, (2) the original copyright notice and (3) a list of
licensing provisions.
The following contents are displayed based on the
licensing conditions described above, and do not govern
your use of the product.

WPA Supplicant
Copyright © 2003-2009, Jouni Malinen and
contributors
All Rights Reserved.
This program is dual-licensed under both the GPL version
2 and BSD license. Either license may be used at your
option.
License
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other
materials provided with the distribution.
3. Neither the name(s) of the above-listed copyright
holder(s) nor the names of its contributors may be used
to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.

208

ELS-02/ELS-02C Owner’s Manual

XySSL
Copyright © 2006-2008, Christophe Devine.
All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the
following conditions are met:
* Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
* Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other
materials provided with the distribution.
* Neither the name of XySSL nor the names of its
contributors may be used to endorse or promote
products derived from this software without specific
prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.

MEMO

Yamaha Downloads
http://download.yamaha.com/
Manual Development Group
© 2016 Yamaha Corporation
Published 2016/07 MWTO-D0
Printed in Japan
ZV66270

ZV66270

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Author                          : Manual Development Group, Yamaha Corporation
Create Date                     : 2016:06:27 15:54:03+09:00
Modify Date                     : 2016:06:27 15:59:37+09:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:06:27 15:59:37+09:00
Format                          : application/pdf
Title                           : ELS-02/ELS-02C Owner's Manual
Creator                         : Manual Development Group, Yamaha Corporation
Document ID                     : uuid:18a44859-eec2-4f67-935f-06d84d9789f4
Instance ID                     : uuid:12b0c637-1a63-48da-b669-fd98bb92334b
Page Mode                       : UseOutlines
Page Count                      : 212

EXIF Metadata provided by EXIF.tools

Yamaha ELS 02/ELS 02C Owner's Manual New Functions (Ver.2.1) Els02 En Om D0

Navigation menu

Versions of this User Manual:

Views

Navigation