Yamaha GEO M6 User Manual V101

• PLEASE READ CAREFULLY BEFORE PROCEEDING
• CONTENTS
• 1 Introduction
• 2 GEO M6 General Set-up Instructions
  • 2.1 Speaker connection
    • 2.1.1 GEO M620 connectors
    • 2.1.2 GEO M6Bass connectors
    • 2.1.3 Cabling
• 3 Amplifier Selection for use with GEO M6 & LS18
  • 3.1 GEO M6 and NXAMP TDControllers
    • 3.1.1 NXAMP connectors
    • 3.1.2 GEO M6 and NXAMP4x1 recommended loading
• 4 GEO M6 Setups on NEXO TD Controllers
  • 4.1 NXAMP TDControllers
• 5 Connection diagrams
  • 5.1 6 x GEO M620 stereo – 2 x LS18 mono on NXAMP4x1
  • 5.2 12 x GEO M620 on NXAMP4x1
  • 5.3 3 x GEO M620 stereo – 3 x GEO M6B stereo - 2 x LS18 mono on NXAMP4x1
  • 5.4 6 x GEO M620 stereo – 6x GEO M6B stereo on NXAMP4x1
• 6 NS-1 Simulation software
• 7 Configurable Directivity Device
  • 7.1 Installing & removing GEO’s Configurable Directivity flanges
  • 7.2 When & where to use Configurable Directivity flanges
• 8 GEO M6 hardware setup procedure
  • 8.1 SAFETY FIRST
    • 8.1.1 Flown Systems Safety
    • 8.1.2 Ground Stacking Safety
    • 8.1.3 Contacts
  • 8.2 General Description
    • 8.2.1 GEO M6 modules rigging system
    • 8.2.2 GEO M6 “Left” and “Right” configuration
    • 8.2.3 GEO M6 Angle Setting Bar configuration
    • 8.2.4 Accessories and kits
    • 8.2.5 Described configurations
    • 8.2.6 WARNINGS ON GEO M6 ACCESSORIES
  • 8.3 Installing GEO M6
    • 8.3.1 1 to 3 (maximum) GEO M6 wall mounted
      • Required items
      • Procedure
    • 8.3.2 1 to 3 (maximum) Geo M6 ceiling mounted
      • Required items
      • Procedure
    • 8.3.3 4 to 12 (maximum) GEO M6 ceiling mounted
      • Required items
      • Procedure
    • 8.3.4 1 to 3 (maximum) GEO M6 pole mounted
      • Required items
      • Procedure
    • 8.3.5 1 to 3 GEO (maximum) M6 truss or cable mounted
      • Procedure
    • 8.3.6 1 to 6 (maximum) GEO M6 stacked on Sub
      • Procedure
    • 8.3.7 4 to 12 (maximum) GEO M6 flown
      • Required items
      • Procedure with flight case set vertically
      • Procedure with flight case set horizontally
  • 8.4 Testing and Maintenance of the system
• 9 System alignment guidelines
  • 9.1 GEO M6 Vertical Cluster design
  • 9.2 Stacked LS18s and Flown GEO M6
  • 9.3 Driving the LS18s from the AUX send
    • Why is it unlikely that AUX and MAIN outputs have the same phase?
    • Consequences of badly aligned systems
    • Precautions & Checks
  • 9.4 Recommended installation tools and equipment
• 10 GEO M6 – LS18s System Check List
  • 10.1 Are the speakers properly connected and angled ?
  • 10.2 Final Pre-Sound Check Check
• 11 Technical Specifications
  • 11.1 LS18 Subwoofer
    • 11.1.1 System specifications
    • 11.1.2 Dimensions
  • 11.2 GEO M620 Module
    • 11.2.1 System specifications
    • 11.2.2 Dimensions
  • 11.3 GEO M6Bass Module
    • 11.3.1 System specifications
    • 11.3.2 Dimensions
  • 11.4 GEO M6 Accessories
    • 11.4.1 GMT-BUMPER
      • Parts
      • Dimensions
      • Weight : 2,25 kg / 4.96 lb
    • 11.4.2 GMT-EXBAR
      • Parts
      • Dimensions
      • Weight : 2,25 kg / 4.96 lb
    • 11.4.3 GMT-BPDAPT
      • Parts
    • 11.4.4 GMT-LBUMPER
      • Parts
      • Dimensions
      • Weight : 1,8 kg / 3.96 lb
    • 11.4.5 GMT-LBPADPT
      • Parts
      • Dimensions
      • Weight : 0,7 kg / 1.54 lb
    • 11.4.1 VNT-POLE
      • Parts
      • Dimensions
      • Weight : 0,9 kg / 1.98 lb
    • 11.4.2 VNT-XHBRK
      • Parts
    • 11.4.3 VNT-TCBRK
      • Parts
    • 11.4.1 GMT-IPCOV
      • Parts
    • 11.4.2 VXT-BL515 PUSH PINS
    • 11.4.3 GMT-BNFIX
      • Parts
    • 11.4.4 VNI-WS15
      • Parts
    • 11.4.5 GMT-6CASE
• 12 GEO M6 Series Parts & Accessories List
  • 12.1 Modules & Control Electronics List
  • 12.2 Accessories List
• 13 USER NOTES