Yamaha HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner's Manual Hs8i En Om B0

User Manual: Yamaha HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner's Manual

Open the PDF directly: View PDF .
Page Count: 20

Download
Open PDF In Browser	View PDF

English
Deutsch
Español

Français

/
/

日本語

Русский

Italiano

Português

/
/

Owner’s Manual
Bedienungsanleitung

Mode d'emploi

Manual de instrucciones

Manual do Proprietário

Manuale di istruzioni

Руководство пользователя

取扱説明書

POWERED SPEAKER SYSTEM

The above warning is located on the rear of the unit.
L’avertissement ci-dessus est situé sur l’arrière de l’unité.

Explanation of Graphical Symbols
Explication des symboles
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
L’éclair avec une flèche à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’une « tension
dangereuse » non isolée à l’intérieur de l’appareil, pouvant être suffisamment élevée pour constituer un risque d’électrocution.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’instructions
importantes sur l’emploi ou la maintenance (réparation) de l’appareil dans la documentation fournie.

IMPORTANT SAFETY
INSTRUCTIONS

PRÉCAUTIONS CONCERNANT LA SÉCURITÉ

1
2
3
4
5
6
7

8
9

11
12

13
14

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms
or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.

WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
(UL60065_03)

11
12

13
14

Lire ces instructions.
Conserver ces instructions.
Tenir compte de tous les avertissements.
Suivre toutes les instructions.
Ne pas utiliser ce produit à proximité d’eau.
Nettoyer uniquement avec un chiffon propre et sec.
Ne pas bloquer les orifices de ventilation. Installer l’appareil conformément aux instructions du fabricant.
Ne pas installer l’appareil à proximité d’une source de chaleur comme
un radiateur, une bouche de chaleur, un poêle ou tout autre appareil
(y compris un amplificateur) produisant de la chaleur.
Ne pas modifier le système de sécurité de la fiche polarisée ou de la
fiche de terre. Une fiche polarisée dispose de deux broches dont une
est plus large que l’autre. Une fiche de terre dispose de deux broches
et d’une troisième pour le raccordement à la terre. Cette broche plus
large ou cette troisième broche est destinée à assurer la sécurité de
l’utilisateur. Si la fiche équipant l’appareil n’est pas compatible avec
les prises de courant disponibles, faire remplacer les prises par un
électricien.
Acheminer les cordons d’alimentation de sorte qu’ils ne soient pas
piétinés ni coincés, en faisant tout spécialement attention aux fiches,
prises de courant et au point de sortie de l’appareil.
Utiliser exclusivement les fixations et accessoires spécifiés par le
fabricant.
Utiliser exclusivement le chariot, le stand, le trépied, le support ou la table recommandés par le
fabricant ou vendus avec cet appareil. Si l’appareil est posé sur un chariot, déplacer le chariot
avec précaution pour éviter tout risque de chute
et de blessure.
Débrancher l’appareil en cas d’orage ou
lorsqu’il doit rester hors service pendant une période prolongée.
Confier toute réparation à un personnel qualifié. Faire réparer l’appareil s’il a subi tout dommage, par exemple si la fiche ou le cordon
d’alimentation est endommagé, si du liquide a coulé ou des objets
sont tombés à l’intérieur de l’appareil, si l’appareil a été exposé à la
pluie ou à de l’humidité, si l’appareil ne fonctionne pas normalement
ou est tombé.

AVERTISSEMENT
POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE
ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À
L’HUMIDITÉ.
(UL60065_03)

Features

Features .................................................. 3

 Accurate, detailed reproduction of the source.

Included Items (please check) .............. 3
PRECAUTIONS....................................... 4
NOTICE ................................................... 5
Rear Panel .............................................. 6
Setup....................................................... 8
Troubleshooting................................... 12
Specifications ...................................... 89
Dimensions .......................................... 89

English

Contents

 A choice of three full-range models plus one
high-performance subwoofer makes it easy to
create systems that are ideally matched to any
monitoring environment.
 Simple 2-way design in the full-range models,
with optimally matched high and low frequency
units.
 Response-tailoring controls match speaker
output to a wide range of acoustic spaces.
 In addition to studio standard XLR connectors,
phone jacks allow direct connection of electronic
musical instruments and other sources.

Performance Graph ............................. 90
Block Diagram...................................... 90
Tilt Angle (HS8I/HS7I/HS5I only)......... 91

Included Items
(please check)
• Power cord

Thank you for choosing a Yamaha powered
monitor speaker or powered subwoofer.
In order to take maximum advantage of the

• Screws for bracket installation
(2; HS8I/HS7I/HS5I only)
• Owner’s Manual (this book)

speaker’s features and ensure maximum
performance and longevity, please read this
manual carefully before using powered
monitor speaker or powered subwoofer.
Keep the manual in a safe place for future
reference.

Optional Items
For HS8I/HS7I
• Baton bracket BBS251

• The illustrations as shown in this manual are for
instructional purposes only.
• The company names and product names in this manual
are the trademarks or registered trademarks of their
respective companies.
• In this manual (unless indicated otherwise), “HS8” refers
to both the HS8 and HS8I, “HS7” refers to the HS7 and
HS7I and “HS5” refers to the HS5 and HS5I.

• Ceiling bracket BCS251
• Wall bracket BWS251
• Wall bracket / ceiling bracket BWS50

For HS5I
• Wall bracket / ceiling bracket BWS20
• Ceiling bracket BCS20

HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner’s Manual

PA_en_7

PRECAUTIONS
PLEASE READ CAREFULLY BEFORE
PROCEEDING
Please keep this manual in a safe place for
future reference.

WARNING
Always follow the basic precautions listed below to avoid the
possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These
precautions include, but are not limited to, the following:

Power supply/power cord

• If this device should be dropped or damaged, immediately turn off the
power switch, disconnect the electric plug from the outlet, and have the
device inspected by qualified Yamaha service personnel.

CAUTION
Always follow the basic precautions listed below to avoid the
possibility of physical injury to you or others, or damage to
the device or other property. These precautions include, but
are not limited to, the following:

Power supply/power cord
• When removing the electric plug from the device or an outlet, always hold
the plug itself and not the cord. Pulling by the cord can damage it.

Location

• This device contains no user-serviceable parts. Do not open the device or
attempt to disassemble the internal parts or modify them in any way. If it
should appear to be malfunctioning, discontinue use immediately and
have it inspected by qualified Yamaha service personnel.

• Do not place the device in an unstable position where it might
accidentally fall over and cause injuries.
• When installing the device:
- Do not cover it with any cloth.
- Do not install it on a carpet or rug.
- Make sure the top surface faces up; do not install on its sides or upside
down.
- Do not use the device in a confined, poorly-ventilated location.
Inadequate ventilation can result in overheating, possibly causing
damage to the device(s), or even fire. Make sure that there is adequate
space around the device: at least 20cm above, 20cm at the sides and
20cm behind.
• Do not press the rear panel of the device against the wall. Doing so may
cause the plug to come in contact with the wall and detach from the
power cord, resulting in short circuiting, malfunction, or even fire.
• Do not place the device in a location where it may come into contact with
corrosive gases or salt air. Doing so may result in malfunction.
• Before moving the device, remove all connected cables.
• (HS8I/HS7I/HS5I only)
Any necessary construction work should be performed in accordance
with construction-related regulations, and done always by a trained
professional. If the device installation requires construction work, make
sure to observe the following precautions.
- Choose mounting hardware and an installation location that can support
the weight of the device.
- Avoid locations that are exposed to constant vibration.
- Use the required tools to install the device.
- Inspect the device periodically.

Water warning

Connections

• Do not expose the device to rain, use it near water or in damp or wet
conditions, or place on it any containers (such as vases, bottles or
glasses) containing liquids which might spill into any openings. If any
liquid such as water seeps into the device, turn off the power immediately
and unplug the power cord from the AC outlet. Then have the device
inspected by qualified Yamaha service personnel.
• Never insert or remove an electric plug with wet hands.

• Before connecting the device to other devices, turn off the power for all
devices. Also, before turning the power of all devices on or off, make sure
that all volume levels are set to the minimum. Failing to do so may result in
electric shock, hearing loss, or equipment damage.

• Do not place the power cord near heat sources such as heaters or
radiators, and do not excessively bend or otherwise damage the cord,
place heavy objects on it, or place it in a position where anyone could
walk on, trip over, or roll anything over it.
• Only use the voltage specified as correct for the device. The required
voltage is printed on the name plate of the device.
• Use only the supplied power cord/plug.
• Check the electric plug periodically and remove any dirt or dust which
may have accumulated on it.
• When setting up the device, make sure that the AC outlet you are using is
easily accessible. If some trouble or malfunction occurs, immediately turn
off the power switch and disconnect the plug from the outlet. Even when
the power switch is turned off, as long as the power cord is not unplugged
from the wall AC outlet, the device will not be disconnected from the
power source.
• Remove the electric plug from the outlet when the device is not to be used
for extended periods of time, or during electrical storms.
• Be sure to connect to an appropriate outlet with a protective grounding
connection.

Do not open

Maintenance
• Remove the power plug from the AC outlet when cleaning the device.

Hearing loss
• Do not use the device for a long period of time at a high or uncomfortable
volume level, since this can cause permanent hearing loss. If you
experience any hearing loss or ringing in the ears, consult a physician.
• When turning on the AC power in your audio system, always turn on the
device LAST, to avoid hearing loss and speaker damage. When turning
the power off, the device should be turned off FIRST for the same reason.

Fire warning
• Do not place any burning items or open flames near the device, since
they may cause a fire.

If you notice any abnormality
• If any of the following problems occur, immediately turn off the power
switch and disconnect the electric plug from the outlet.
- The power cord or plug becomes frayed or damaged.
- Unusual smells or smoke are emitted.
- Some object has been dropped into the device.
- There is a sudden loss of sound during use of the device.
- Cracks or other visible damage appear on the device.
Then have the device inspected or repaired by qualified Yamaha service
personnel.

Handling caution
• Do not insert your fingers or hands in any gaps or openings on the device
(ports).
• Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.)
into any gaps or openings on the device (ports). If this happens,
immediately turn off the power, unplug the power cord from the AC outlet,
and have the device inspected by qualified Yamaha service personnel.
• Do not rest your weight on the device or place heavy objects on it, and
avoid use excessive force on the buttons, switches or connectors to
prevent injuries.
• Do not operate the device if the sound is distorting. Prolonged use in this
condition could cause overheating and result in fire.
• Avoid pulling the connected cables to prevent injuries.
Yamaha cannot be held responsible for damage caused by improper
use or modifications to the device.

In Finland: Laite on liitettävä suojamaadoituskoskettimilla varustettuun
pistorasiaan.
In Norway: Apparatet må tilkoples jordet stikkontakt.
In Sweden: Apparaten skall anslutas till jordat uttag.
(class I hokuo)

HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner’s Manual

 Phone type

To avoid the possibility of malfunction/ damage to the product,
damage to data, or damage to other property, follow the
notices below.

 Handling and maintenance
• Do not use the device in the vicinity of a TV, radio, AV
equipment, mobile phone, or other electric devices. Otherwise,
the device, TV, or radio may generate noise.
• Do not expose the device to excessive dust or vibration, or
extreme cold or heat (such as in direct sunlight, near a heater,
or in a car during the day), in order to prevent the possibility of
panel disfiguration, unstable operation, or damage to the
internal components.
• Do not place vinyl, plastic or rubber objects on the device,
since this might discolor the panel.
• When cleaning the device, use a dry and soft cloth. Do not use
paint thinners, solvents, cleaning fluids, or chemicalimpregnated wiping cloths.
• Condensation can occur in the device due to rapid, drastic
changes in ambient temperature—when the device is moved
from one location to another, or air conditioning is turned on or
off, for example. Using the device while condensation is
present can cause damage. If there is reason to believe that
condensation might have occurred, leave the device for
several hours without turning on the power until the
condensation has completely dried out.
• During extreme changes in temperature or humidity,
condensation may occur and water may collect on the surface
of the device. If water is left, the wooden parts may absorb the
water and be damaged. Make sure to wipe any water off
immediately with a soft cloth.
• Do not place the speaker face down.
• These speakers should be used vertically, not laid on their side.
• Avoid touching or allowing objects to come in contact with the
speaker diaphragms.
• Air blowing out of the bass reflex ports is normal, and often
occurs when the speaker is handling program material with
heavy bass content.
• Always turn the power off when the device is not in use.

Phone type connectors can be used for both unbalanced and
balanced connections.
Cables fitted with TRS (tip, ring, sleeve) phone plugs are
necessary for balanced connections to the HS series
speakers. The construction of TRS phone plugs is basically
the same as stereo phone plugs.

English

NOTICE

Tip: hot (+)
Ring: cold (-)
Sleeve: ground

For unbalanced connections, connect standard mono phone
plug cables to the HS speaker phone connectors.

Tip: hot (+)
Sleeve: ground

 RCA pin
Source devices that only have RCA pin type output
connectors can be connected via RCA pin plug to phone plug
conversion cables (cables with an RCA pin plug on one end
and a phone plug on the other). Connections using RCA pin
plug to phone plug conversion cables are unbalanced.

Balanced connections: These effectively cancel
noise picked up from external sources. Balanced
connections allow for longer cable runs that would
probably otherwise result in more noise being picked up.
Unbalanced connections: Commonly used to

 Connectors
• XLR-type connectors are wired as follows (IEC60268 standard):
pin 1: ground, pin 2: hot (+), and pin 3: cold (-).

Connectable cables
 XLR type
XLR type connectors are widely used in professional audio
equipment and installations. The XLR type connectors
provided on the HS series speakers are primarily intended for
use with balanced connections.
Pin 2: hot (+)
Pin 3: cold (-)
Pin 1: ground
Pin 1: ground
Pin 3: cold (-)
Pin 2: hot (+)

connect electronic musical instruments and guitars, etc.,
to amplification equipment. If your cable runs do not
extend past one or two meters, unbalanced cables can
probably be used without any problems.

IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
WARNING: THIS APPARATUS MUST BE EARTHED IMPORTANT.
The wires in this mains lead are coloured in accordance with
the following code:
GREEN-AND-YELLOW : EARTH
BLUE
: NEUTRAL
BROWN
: LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying the
terminals in your plug proceed as follows:
The wire which is coloured GREEN-and-YELLOW must be
connected to the terminal in the plug which is marked by the
letter E or by the safety earth symbol
or colored GREEN or
GREEN-and-YELLOW.
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
(3 wires)

HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner’s Manual

Rear Panel
The HS8/HS7/HS5/HS8S switches and connectors are located on the rear panel, as described below.

HS8/HS7/HS5

Speaker Input and Response Control
1 LEVEL control

Adjusts the output level of the speaker.
When set to the 12-o’clock position the speaker is
optimized for a nominal input level of +4 dB.

2 INPUT 1/2 connector
These connectors receive the input signal to the
speaker. Two input connectors are provided: one
balanced XLR connector, and one balanced (TRS)
phone jack.

NOTE The XLR and phone jack input connectors can not be
used simultaneously. Use only one input connector at a
time.
NOTE Refer to “Connectable cables” on page 5 for more
connector details.

3
4

3 ROOM CONTROL switch
Adjusts the speaker’s low-frequency response.
This switch can be used to compensate for
exaggerated low-frequency response that can be
caused by reflections in some listening environments.
Setting the switch to the [0] position produces a flat
frequency response. The [-2 dB] setting attenuates
the range below 500 Hz by 2 dB, and the [-4 dB]
setting attenuates the range below 500 Hz by -4 dB.

4 HIGH TRIM switch
Adjusts the speaker’s high-frequency response.
Setting the switch to the [0] position produces a flat
frequency response. The [+2 dB] setting boosts the
range above 2 kHz by 2 dB, while the [-2 dB] setting
attenuates the range above 2 kHz by -2 dB.

5 Power switch
Turns power to the speaker ON or OFF.
Rock the switch to the right [ ] to turn the power ON, or to
the left [ ] to turn the power OFF. The logo on the front
panel will light when the power is ON.
NOTICE
• Turning the power switch ON and OFF in rapid succession can cause
the device’s electronics to malfunction. Please wait for 3 seconds or
more after turning the power OFF before turning it ON again.
• Even when the power switch is turned off, electricity is still flowing to
the product at the minimum level. When you are not using the product
for a long time, make sure to unplug the power cord from the wall AC
outlet.

6 AC IN connector
Connect the supplied power cable here. First connect the
power cord to the speaker, then insert the power cord plug
into the AC outlet.

HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner’s Manual

English

HS8S (Subwoofer)
6
8

Subwoofer Connections

4 5

HS8S
signal flow

1 INPUT L/R connector
These connectors receive the input signal to the
subwoofer. Balanced XLR and balanced phone jack
connectors are provided for both the L and R inputs.
The L and R inputs can be used simultaneously.
Signals supplied to both the L and R inputs are mixed
internally.
NOTE The XLR and phone jack input connectors can not be
used simultaneously. Use only one input connector at a
time.
NOTE Refer to “Connectable cables” on page 5 for more
connector details.

6 7

Subwoofer Response Control
5 HIGH CUT control
Sets the cutoff frequency for subwoofer output highfrequency attenuation from 80 Hz to 120 Hz.

6 PHASE switch

Connecting the Subwoofer to the
HS8/HS7/HS5 Speakers
2 OUTPUT L/R connectors
These are the subwoofer’s output connectors.
The input signals received at the INPUT L and R
connectors are output via the OUTPUT L and R
connectors, respectively. Low frequency reproduction
characteristics can be adjusted via the LOW CUT
switch and LOW CUT control.

3 LOW CUT switch
When this switch is ON, the low frequencies are
attenuated prior to output via the OUTPUT L and R
connectors at the frequency set by the LOW CUT
control. The low-frequency attenuation cutoff
frequency can be adjusted via the LOW CUT control.

4 LOW CUT control
Adjusts the low-frequency attenuation cutoff
frequency between 80 Hz and 120 Hz when the LOW
CUT switch is ON.

Switches the phase of the subwoofer output.
This switch should be set to [NORM.] in most
situations, but in combination with some speakers
and in some speaker layouts switching to the [REV.]
setting may improve low-frequency response. Select
the setting that provides the best bass response in
your system.

7 LEVEL control
Adjusts the subwoofer output level.

8 Power switch
Turns power to the subwoofer ON or OFF.
Rock the switch to the right [ ] to turn the power ON, or to
the left [ ] to turn the power OFF. The logo on the front
panel will light when the power is ON.
NOTICE
• Turning the power switch ON and OFF in rapid succession can cause
the device’s electronics to malfunction. Please wait for 3 seconds or
more after turning the power OFF before turning it ON again.
• Even when the power switch is turned off, electricity is still flowing to
the product at the minimum level. When you are not using the product
for a long time, make sure to unplug the power cord from the wall AC
outlet.

9 AC IN connector
Connect the supplied power cable here. First connect the
power cord to the subwoofer, then insert the power cord
plug into the AC outlet.

HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner’s Manual

Setup
In this section we’ll look at the general procedure for connecting and setting up a monitor speaker system.
This is just an example though, so feel free to set up your own system in the way that best serves your
personal listening needs.

 Recommended cables

Cables

 For connection to a balanced phone jack input.

You’ll need to acquire appropriate cables to connect
the HS series monitor speakers to your audio interface
or other source equipment.

HS8/HS7/HS5

• Short, high-quality cables
Use high-quality cables of the shortest practical
length. The longer the cable, the more chance there
is that noise will creep in to degrade your sound.

 For connection to an unbalanced phone jack input.

• Balanced cables

HS8/HS7/HS5

Balanced cables are more resistant to noise than
unbalanced cables. If you have to use unbalanced
cables because the source equipment only has
unbalanced outputs, be sure to use the shortest
possible unbalanced cables.

NOTE Refer to “Connectable cables” on page 5 for more connector
details. The configurations of the balanced and unbalanced
phone jack connectors are different.

Connections
NOTICE
Plug the supplied AC power cord into the corresponding socket on the
speaker. Plug the power cord into the speaker first, and then insert the
AC plug end into an appropriate AC wall outlet.

Connecting to an Audio Interface
When connecting an audio interface (Steinberg UR or
MR series, etc.) to HS series speakers, connect the
audio interface output connectors directly to the
speakers’ input connectors. Normally you’ll connect to
the LINE OUT 1 and 2 (1L and 2R outputs), although
that might depend on the specific audio interface and
DAW (Digital Audio Workstation) settings used.
HS8/HS7/HS5

Connecting to a Mixer
When connecting a mixer (Yamaha MGP or MG series,
etc.) to HS series speakers, connect the mixer’s
MONITOR OUT or C-R OUT (Control Room) connectors
directly to the speakers’ input connectors. This makes it
possible to control the monitor level independently from
the mixer’s main bus level.
HS8/HS7/HS5
INPUT

HS8/HS7/HS5

MONITOR
OUT
or
C-R OUT

HS8/HS7/HS5

HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner’s Manual

INPUT

 Recommended cables
 For connection to a balanced XLR input.

NOTE Refer to “Connectable cables” on page 5 for more connector
details. The configurations of the balanced and unbalanced
phone jack connectors are different.

English

HS8/HS7/HS5

Setting Up for Superior
Sound
 For connection to an unbalanced phone jack input.

A number of points should be observed when laying out
a monitor speaker system.

HS8/HS7/HS5
1.5 meters or more

NOTE Refer to “Connectable cables” on page 5 for more connector
details. The configurations of the balanced and unbalanced
phone jack connectors are different.

1.5
meters
or more

60˚

Connecting to a Synthesizer or
Other Electronic Musical Instrument
When connecting an electronic musical instrument
such as a Yamaha MOTIF synthesizer to the HS series
speakers, connect the instrument’s L/MONO and R
outputs to the HS speaker inputs.
HS8/HS7/HS5

HS8/HS7/HS5

 Point 1
Position speakers at least 1.5 meters away from
walls or corners.
OUTPUT L/MONO

OUTPUT R

Ideally, the speakers should be located at least 1.5
meters away from walls or corners. In situations where it
is not possible to position the speakers a sufficient
distance from walls or corners, the ROOM CONTROL
switch can be used compensate for excessive bass. As
you move the speaker closer to walls or corners, a
higher compensation setting may be required to
achieve natural sounding response ([0] → [-2] → [-4]).

 Recommended cables
 For connection to an unbalanced phone jack input.
HS8/HS7/HS5

HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner’s Manual

 Point 2
Position the left and right speakers
symmetrically.
The left and right speakers should be positioned as
symmetrically as possible in relation to the room. In
other words, the left and right speakers should be the
same distance from the rear wall and the respective left
and right walls.

 Point 3
The optimum listening position is at the apex of
an equilateral triangle.
For the most accurate sound and balance, position
yourself at the apex of an equilateral triangle formed by
the left and right speakers and yourself, with the
speakers angled inward so that they’re facing you.

 Point 4
Position the tweeters at ear height.
High frequencies are quite directional, so for the most
accurate monitoring the speakers should be set up so
that the tweeters are at approximately the same height
as your ears when you’re seated at the listening
position.

NOTE If necessary, adjust the ROOM CONTROL and HIGH TRIM
switches for the most natural response (refer to page 6).

Adding a Subwoofer (HS8S)
Adding a subwoofer to your monitor system can
significantly improve its low-frequency fidelity, making it
possible to create better overall mixes.
The subwoofer is normally placed on the floor between
the left and right full-range speakers, but since the
subwoofer reproduces low frequencies below 200 Hz
that are relatively non-directional, subwoofer positioning
is not critical.
Four cables are required: two to connect the audio
interface or other source equipment to the HS8S
subwoofer, and two more to connect the subwoofer to
the left and right HS8/HS7/HS5 main speakers.
The connections are made as shown below.
HS8/HS7/HS5

HS8/HS7/HS5
HS8S

HS8/HS7/HS5 Settings
Once the physical layout of your monitor system is
finalized, you can begin making the following settings.

Turn the level/volume controls on all
source equipment (audio interface, etc.) all
the way down.

Set the HS8/HS7/HS5 LEVEL control to the
12-o’clock position, and set both ROOM
CONTROL and HIGH TRIM switches to 0
dB.

Turn the power to connected audio source
devices on first, and then turn on power to
the speakers.

HS8S

HS8/HS7/HS5

Audio interface or
other source

NOTICE
When turning power off, turn off the speakers first, and then turn
off connected audio source devices.

Play some source material and gradually
raise the level/volume controls on the
source equipment.
NOTICE
Be careful not to suddenly apply an excessively loud signal to the
system. Excessive level can damage the speakers.

Set the listening level to a level at which
you can listen comfortably without fatigue
for an extended period of time.

HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner’s Manual

NOTICE
Plug the supplied AC power cord into the corresponding socket on the
speaker. Plug the power cord into the speaker first, and then insert the
AC plug end into an appropriate AC wall outlet.

Set the HS8S LEVEL control to 0, the HIGH
CUT and LOW CUT controls to their 12o’clock positions, and set the LOW CUT
switch to OFF.

Turn power on in the following order: audio
source devices, then subwoofer, and finally
the full-range speakers.

Cables for connecting the audio source (audio
interface, etc.) to the HS8S
 For connection to a balanced phone jack input.
HS8S

English

 Recommended cables

NOTICE
Turn power off in the following order: full-range speakers, then
subwoofer, and finally audio source devices.

 For connection to a balanced XLR input.

5
HS8S

Set the HS8S LEVEL control to between 10
and 12 o’clock, and turn the LOW CUT
switch ON.

Set the listening level to a level at which
you can listen comfortably without fatigue
for an extended period of time.

 For connection to an unbalanced phone jack input.
HS8S

Cables for connection between the HS8S and
HS8/HS7/HS5
HS8S
HS8
HS7
HS5

HS8
HS7
HS5

NOTE Refer to “Connectable cables” on page 5 for more connector
details. The configurations of the balanced and unbalanced
phone jack connectors are different.

 Settings for Speakers Plus Subwoofer
Once the subwoofer connections have been made and
the layout is finalized, you can begin making the
following settings.

Turn the level/volume controls on all
source equipment (audio interface, etc.) all
the way down.

Set the HS8/HS7/HS5 LEVEL control to the
12-o’clock position, and set both ROOM
CONTROL and HIGH TRIM switches to 0
dB.

NOTE • If necessary, adjust the ROOM CONTROL and HIGH TRIM
switches for the most natural response (refer to page 6).
• If necessary, adjust the LOW CUT and HIGH CUT controls
and the PHASE switch for the most natural response (refer
to page 7).

Installing Brackets
(HS8I/HS7I/HS5I only)
HS8I/HS7I/HS5I can be installed with optional brackets.
Two screw holes for installing the brackets are located
on each of the four surfaces (top, bottom, left and right).
Refer also to the bracket installation manual.
Note that there are two sets of screws: those that are
originally installed in the speaker cabinet (to plug the
installation holes) and those (for bracket installation)
that are included in the product package. When
installing brackets to the speaker, remove the original
screws and make sure to use only the screws included
in the product package for bracket installation.

Screw holes for installing
brackets

HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner’s Manual

Screws included
with the product

Caution
• Construction work should be carried out by a professional
constructor.
• Do not install the speaker transversely.
• Make sure not to touch the cone when installing.
• For optimum safety, the installation should be checked thoroughly at
regular intervals. Some fittings may deteriorate over extended periods
of time due to wear and/or corrosion, or the mounted parts may
loosen.
• When choosing the installation location such as wall and ceiling and
mounting hardware (bolts, nuts), make sure all are strong enough to
support the weight of the speaker.
• Make sure to properly use the safety wire to prevent the speaker from
falling down in the event of an installation failure.
• When installing the safety wire to the ceiling or wall, install it higher
than the wire's attachment point on the speaker to reduce slack. Also,
ensure that the installation height and location would pose no danger
to people should the speaker fall.
• Yamaha does not assume any responsibilities for accidents such as
dropping due to insufficient strength at attachment points or
inadequacy of the mounting method.
• The recommended tightening torque for installing the included screws
for bracket installation is 6.2 Nm for the M8 screw (HS8I and HS7I)
and 2.4 Nm for the M5 screw (HS5I).
• Use safety wires with the following specifications.
Diameter

Ø3.0 mm or more

Length

Less than 600 mm

Material

Stainless steel

Breaking load

6,370 N (650 kg) or more

Included screws
for bracket
installation

Eyenut

Safety
wire

Eyebolt

* This example
shows how to
install to a wall.

Sectional
view

HS8I: 25–50 mm
HS7I: 25–30 mm
HS5I: 20–25 mm

Enclosure
Washer, etc.

Reinforcement
plate

Eyebolt

NOTE Do not use the speaker if the screws at locations where
brackets are not installed have been removed. This causes air
leaks to occur from the enclosure, resulting in undesirable
performance.

HS8I/HS7I: Ø18, HS5I: Ø12
HS8I/HS7I: M8, HS5I: M5

Troubleshooting
Symptom

Solution

Power won’t turn on /
front panel logo
doesn’t light.

The power cord might not be connected
properly.

Check and connect the power cord.

The power switch might not be turned on.

Turn the power switch ON. If the problem persists,
contact your Yamaha dealer.

No sound.

One or more cables might not be
connected properly.

Check that all cables are properly connected.

The source equipment might not be
supplying an audio signal.

Make sure that the source equipment is
functioning properly and delivering the required
signal.

The level setting might be too low.

Adjust the output level setting of the source
equipment, or use the LEVEL control to increase
the output level.

Are cables connected to both the XLR and
phone jack INPUT connectors?

The XLR and phone jack input connectors can not
be used simultaneously. Use only one input
connector at a time.

One or more cables might be corroded,
shorted, or otherwise broken.

Replace faulty cable(s).

The system might be picking up external
noise.

Try changing the positions or layout of the cables.

Noisy or distorted
sound.

Possible Cause

HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner’s Manual

Try changing the location of other electrical/
electronic devices that are near the speakers.

By disposing of these products correctly, you will help to save
valuable resources and prevent any potential negative effects on
human health and the environment which could otherwise arise from
inappropriate waste handling.

Si se deshace correctamente de estos productos, contribuirá a ahorrar valiosos
recursos y a impedir los posibles efectos adversos que sobre la salud humana y
el medio ambiente podría provocar la incorrecta manipulación de la basura.

For more information about collection and recycling of old products, please
contact your local municipality, your waste disposal service or the point of sale
where you purchased the items.

Póngase en contacto con su ayuntamiento, con el departamento de eliminación
de basuras o con el establecimiento donde adquirió los artículos y obtenga más
información acerca de la recogida y reciclaje de productos antiguos.

[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your
dealer or supplier for further information.

[Para usuarios profesionales de la Unión Europea]
Si desea desechar equipos eléctricos y electrónicos, póngase en contacto con
su distribuidor o proveedor para obtener más información.

[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these
items, please contact your local authorities or dealer and ask for the correct
method of disposal.

[Información acerca del desecho en países fuera del ámbito de la Unión
Europea]
Este símbolo solo es válido dentro de la Unión Europea. Si desea desechar
estos artículos, póngase en contacto con las autoridades municipales o con su
distribuidor, e infórmese acerca del método correcto de hacerlo.

English

Este símbolo en los productos, embalajes y/o documentos
adjuntos indica que los productos eléctricos y electrónicos
usados no deben mezclarse con la basura doméstica normal.
Lleve los productos antiguos a los puntos de recogida
pertinentes, de acuerdo con la legislación nacional y la Directiva
2002/96/CE, para conseguir así un tratamiento, recuperación y
reciclaje adecuados.

Deutsch

This symbol on the products, packaging, and/or accompanying
documents means that used electrical and electronic products
should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products,
please take them to applicable collection points, in accordance
with your national legislation and the Directives 2002/96/EC.

Información para los usuarios acerca de la recogida y
desecho de equipos antiguos

Français

Information for Users on Collection and Disposal of Old
Equipment

(weee_eu_en_01)
(weee_eu_es_01a)

Durch die fachgerechte Entsorgung der Elektrogeräte helfen Sie, wertvolle
Ressourcen zu schützen, und verhindern mögliche negative Auswirkungen auf
die menschliche Gesundheit und die Umwelt, die andernfalls durch
unsachgerechte Müllentsorgung auftreten könnten.
Für weitere Informationen zum Sammeln und Wiederaufbereiten alter
Elektrogeräte kontaktieren Sie bitte Ihre örtliche Stadt- oder Gemeindeverwaltung,
Ihren Abfallentsorgungsdienst oder die Verkaufsstelle der Artikel.
[Information für geschäftliche Anwender in der Europäischen Union]
Wenn Sie Elektrogeräte ausrangieren möchten, kontaktieren Sie bitte Ihren
Händler oder Zulieferer für weitere Informationen.
[Entsorgungsinformation für Länder außerhalb der Europäischen Union]
Dieses Symbol gilt nur innerhalb der Europäischen Union. Wenn Sie solche Artikel
ausrangieren möchten, kontaktieren Sie bitte Ihre örtlichen Behörden oder Ihren
Händler und fragen Sie nach der sachgerechten Entsorgungsmethode.

Español

Este símbolo nos produtos, embalagem e/ou documentos que os
acompanham significa que os produtos elétricos e eletrónicos
velhos não devem ser misturados com o lixo doméstico geral.
Para o tratamento, recuperação e reciclagem apropriados de
produtos velhos, leve-os para os pontos de recolha aplicáveis, de
acordo com a legislação nacional do seu país e com a Diretiva
2002/96/CE.
Através da eliminação correta destes produtos, ajudará a poupar recursos
valiosos e a prevenir quaisquer potenciais efeitos negativos sobre a saúde
humana e o meio ambiente, que poderiam ocorrer do manuseio inapropriado de
resíduos.

Português

Befindet sich dieses Symbol auf den Produkten, der Verpackung
und/oder beiliegenden Unterlagen, so sollten benutzte
elektrische Geräte nicht mit dem normalen Haushaltsabfall
entsorgt werden.
In Übereinstimmung mit Ihren nationalen Bestimmungen und den
Richtlinien 2002/96/EG bringen Sie alte Geräte bitte zur
fachgerechten Entsorgung, Wiederaufbereitung und
Wiederverwendung zu den entsprechenden Sammelstellen.

Informações para os utilizadores sobre a recolha e
eliminação de equipamentos velhos

Para mais informações sobre a recolha e reciclagem de produtos velhos,
contacte a autoridade local responsável, o serviço de recolha de resíduos ou o
local de venda onde comprou os produtos.
[Para utilizadores comerciais na União Europeia]
Se quiser eliminar equipamentos elétricos e eletrónicos, contacte o seu
revendedor ou fornecedor para mais informações.
[Informações sobre a eliminação nos países fora da União Europeia]
Este símbolo é válido apenas na União Europeia. Se pretender eliminar estes
itens, contacte a autoridade local responsável ou o seu revendedor e informe-se
sobre o método de eliminação correto.

Italiano

Verbraucherinformation zur Sammlung und Entsorgung
alter Elektrogeräte

(weee_eu_pt_01a)
(weee_eu_de_01a)

En vous débarrassant correctement des déchets d’équipements électriques et
électroniques, vous contribuerez à la sauvegarde de précieuses ressources et à
la prévention de potentiels effets négatifs sur la santé humaine qui pourraient
advenir lors d'un traitement inapproprié des déchets.

La presenza di questo simbolo sui prodotti, sull’imballaggio, e/o
sui documenti che li accompagnano avverte l’utente che i prodotti
elettrici ed elettronici usati non devono essere associati ai rifiuti
domestici generici.
Per il trattamento, recupero e riciclaggio appropriati di vecchi
prodotti, consegnarli ai punti di raccolta specifici in accordo con
la propria legislazione nazionale e la direttiva 2002/96/CE.
Smaltendo correttamente questi prodotti, si contribuisce al risparmio di risorse
preziose e a prevenire alcuni potenziali effetti negativi sulla salute umana e
l’ambiente, che altrimenti potrebbero sorgere dal trattamento improprio dei rifiuti.
Per ulteriori informazioni sulla raccolta e il riciclaggio di vecchi prodotti,
contattare la propria amministrazione comunale, il servizio di smaltimento dei
rifiuti o il punto vendita dove i prodotti sono stati acquistati.

Pour plus d'informations à propos de la collecte et du recyclage des déchets
d’équipements électriques et électroniques, veuillez contacter votre
municipalité, votre service de traitement des déchets ou le point de vente où
vous avez acheté les produits.

[Per le aziende dell’Unione europea]
Se si desidera disfarsi di prodotti elettrici ed elettronici, contattare il rivenditore o
il fornitore per ulteriori informazioni.

[Pour les professionnels dans l'Union Européenne]
Si vous souhaitez vous débarrasser des déchets d’équipements électriques et
électroniques veuillez contacter votre vendeur ou fournisseur pour plus
d'informations.

[Informazioni sullo smaltimento negli altri Paesi al di fuori dell’Unione
europea]
Il presente simbolo è valido solamente nell’Unione europea. Se si desidera
disfarsi di questi articoli, contattare le autorità locali o il rivenditore per informarsi
sulle corrette modalità di smaltimento.

[Information sur le traitement dans d'autres pays en dehors de l'Union
Européenne]
Ce symbole est seulement valable dans l'Union Européenne. Si vous souhaitez
vous débarrasser de déchets d’équipements électriques et électroniques,
veuillez contacter les autorités locales ou votre fournisseur et demander la
méthode de traitement appropriée.

Русский

Le symbole sur les produits, l'emballage et/ou les documents
joints signifie que les produits électriques ou électroniques
usagés ne doivent pas être mélangés avec les déchets
domestiques habituels.
Pour un traitement, une récupération et un recyclage appropriés
des déchets d’équipements électriques et électroniques, veuillez
les déposer aux points de collecte prévus à cet effet,
conformément à la réglementation nationale et aux Directives
2002/96/CE.

Informazioni per gli utenti sulla raccolta e lo smaltimento
di vecchia attrezzatura

日本語

Information concernant la Collecte et le Traitement des
déchets d’équipements électriques et électroniques.

(weee_eu_it_01a)

(weee_eu_fr_01a)

* The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the
Yamaha website then download the manual file. Since specifications, equipment or separately sold accessories may not be the
same in every locale, please check with your Yamaha dealer.

* Der Inhalt dieser Bedienungsanleitung gilt für die neuesten technischen Daten zum Zeitpunkt der Veröffentlichung. Um die neueste
Version der Anleitung zu erhalten, rufen Sie die Website von Yamaha auf und laden Sie dann die Datei mit der
Bedienungsanleitung herunter. Da die Technischen Daten, das Gerät selbst oder gesondert erhältliches Zubehör nicht in jedem
Land gleich sind, setzen Sie sich im Zweifel bitte mit Ihrem Yamaha-Händler in Verbindung.

* Le contenu de ce mode d’emploi s’applique aux dernières caractéristiques techniques connues à la date de publication du manuel.
Pour obtenir la version la plus récente du manuel, accédez au site Web de Yamaha puis téléchargez le fichier du manuel concerné.
Étant donné que les caractéristiques techniques, les équipements et les accessoires vendus séparément varient d’un pays à
l’autre, adressez-vous pour cela à votre distributeur Yamaha.

* El contenido de este manual se aplica a las últimas especificaciones según la fecha de publicación. Para obtener el último manual,
acceda al sitio web de Yamaha y descargue el archivo del manual. Puesto que las especificaciones, los equipos o los accesorios
que se vendan aparte podrían no ser iguales en todos los sitios, consulte al distribuidor de Yamaha.

* O conteúdo deste manual se aplica às especificações mais recentes a partir da data de publicação. Para obter o manual mais
recente, acesse o site da Yamaha e faça o download do arquivo do manual. Como as especificações, os equipamentos ou os
acessórios vendidos separadamente podem não ser iguais em todas as localidades; consulte o revendedor Yamaha.

* Il contenuto del presente manuale si applica alle ultime specifiche tecniche a partire dalla data di pubblicazione. Per ottenere la
versione più recente del manuale, accedere al sito Web Yamaha e scaricare il file corrispondente. Dal momento che le specifiche
tecniche, le apparecchiature e gli accessori venduti separatamente potrebbero variare a seconda del paese in cui viene distribuito il
prodotto, verificarli con il rivenditore Yamaha.

* В содержании данного руководства приведены последние на момент публикации технические характеристики. Для
получения последней версии руководства посетите веб-сайт корпорации Yamaha и загрузите файл с руководством. Так как
технические характеристики, оборудование и отдельно продаваемые принадлежности могут различаться в разных странах,
обратитесь за информацией к представителю корпорации Yamaha в своем регионе.

* この取扱説明書では、発行時点の最新仕様で説明をしております。最新版の取扱説明書につきましては、ヤマハウェブサイトか
らダウンロードしてお読みいただけますようお願いいたします。

이 기기는 가정용(B급) 전자파적합기기로서 주로
가정에서 사용하는 것을 목적으로 하며, 모든
지역에서 사용할 수 있습니다.
(class b korea)

Specifications
HS8

HS8I

HS7

HS7I

HS5

HS5I

HS8S

English

Model
Type
Crossover Frequency
Overall
-3dB
Frequency
-10dB
Response

Bi-amp 2-way powered speaker
2 kHz
47 Hz – 24 kHz
55 Hz – 24 kHz

74 Hz – 24 kHz

Powered subwoofer
–
33 Hz – 124 Hz

38 Hz – 30 kHz

43 Hz – 30 kHz

54 Hz – 30 kHz

22 Hz – 160 Hz

Mounting Points

–

Four surfaces x 2 x M8
(120 mm pitch)
250 x 390 x 334 mm
9-13/16 x 15-3/8 x 13-1/8"
10.2 kg
10.7 kg
(22.5 lb.) (23.6 lb.)

Four surfaces x 2 x M8
(120 mm pitch)
210 x 332 x 284 mm
8-1/4 x 13-1/16 x 11-3/16"
8.2 kg
8.7 kg
(18.1 lb.) (19.2 lb.)

Four surfaces x 2 x M5
(60 mm pitch)
170 x 285 x 222 mm
6-11/16 x 11-1/4 x 8-3/4"
5.3 kg
5.5 kg
(11.7 lb.) (12.1 lb.)

Dimensions (W x H x D)
Weight

–

Deutsch

General Specifications

–
300 x 350 x 389 mm
11-13/16 x 13-3/4 x 15-5/16"
12.5 kg (27.6 lb.)

Speaker Components
Enclosure

LF: 8" cone
LF: 6.5" cone
HF: 1" dome
HF: 1" dome
Bass-reflex type, Material: MDF

LF: 5" cone
HF: 1" dome

120 W (dynamic power)

95 W (dynamic power)

70 W (dynamic power)

75 W (4 ohms)
45 W (8 ohms)
-10 dBu/10k ohms
–
1: XLR-3-31 type (balanced)
2: PHONE (balanced)

60 W (4 ohms)
35 W (8 ohms)

45 W (4 ohms)
25 W (8 ohms)

Français

Speaker Components
8" cone

Amplifier Unit

Input Connectors (Parallel)

Español

LF
HF
Input Sensitivity / Impedance
Output Level/Impedance

150 W, 4 ohms (dynamic
power)
–
–
-10 dBu/600 ohms

Output Connectors

–

Controls

LEVEL control (+4 dB, center click)
EQ: HIGH TRIM switch (+/- 2 dB at HF),
ROOM CONTROL switch (0/-2/-4 dB under 500Hz)

Indicator
Power Consumption

Power ON (White LED)
60 W

45 W

70 W

Italiano

55 W

XLR-3-32 type (balanced) x2
(L&R)
LEVEL control
PHASE switch (NORM./REV.)
HIGH CUT control
(80 – 120 Hz, center click)
LOW CUT control
(80 – 120 Hz, center click)
LOW CUT switch (ON/OFF)

Português

Total
Output Power

HS8/HS8I

Русский

Dimensions
HS7/HS7I

120

Unit: mm (inch)

日本語

Unit: mm (inch)

2-M8

(HS8I Only)

(HS7I only)

120

332 (13-1/16")

2-M8
(HS8I Only)

120

284 (11-3/16")
75

210 (8-1/4")

150

390 (15-3/8")

120

334 (13-1/8")
75

250 (9-13/16")

2-M8
(HS7I only)

HS5/HS5I
Unit: mm (inch)

HS8S
Unit: mm (inch)

2-M5
(HS5I only)

222 (8-3/4")
97

170 (6-11/16")

17
389 (15-5/16")

350 (13-3/4")

285 (11-1/4")

110

300 (11-13/16")

2-M5
(HS5I only)

Performance Graph
HS8/HS8I

HS7/HS7I

HS5/HS5I

HS8S

Block Diagram
HS8/HS7/HS5
HS8I/HS7I/HS5I

HIGH TRIM STEP FILTER LOWCUT

P.AMP

INPUT 1
LEVEL

LOW CUT ROOM CONTROL

INPUT 2
LOW BOOST STEP FILTER HIGH CUT

LIMITER

P.AMP

LF
LOW CUT ON/OFF

HS8S
L ch

OUTPUT

INPUT
LOW CUT

HIGH CUT

PHASE

INPUT
SUM

R ch

INPUT
INPUT

NORMAL
REVERSE
P.AMP

OUTPUT
LOW CUT
SPEAKER

LIMITTER

LEVEL

English

Tilt Angle (HS8I/HS7I/HS5I only)
Wall mount
Model

Bracket

Maximum tilt angle

BWS251-300

30°

BWS251-400

45°

BWS50-260

0°

BWS50-190

Not compatible

BWS251-300

35°

BWS251-400

45°

BWS50-260

0°

BWS50-190

Not compatible

BWS20-190

0°

BWS20-120

Not compatible

Model

Bracket

Maximum tilt angle

BCS251

45°

HS8I

BWS50-260

Deutsch

HS8I

Français

HS7I

Español

HS5I

Português

Ceiling mount

30°
BWS50-190

HS7I

45°

Italiano

BCS251
BWS50-260

30°
BWS50-190
BCS20-210
BCS20-150

HS5I

Русский

20°
BWS20-190

日本語

BWS20-120

Yamaha Pro Audio global website
http://www.yamahaproaudio.com/
Yamaha Downloads
http://download.yamaha.com/

ZV05470

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Annotate, Fill forms, Extract, Print high-res
Author                          : Manual Development Group, Yamaha Corporation
Create Date                     : 2016:05:26 14:43:35+09:00
Modify Date                     : 2016:05:26 14:44:02+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Metadata Date                   : 2016:05:26 14:44:02+09:00
Format                          : application/pdf
Title                           : HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner's Manual
Creator                         : Manual Development Group, Yamaha Corporation
Document ID                     : uuid:e628a79a-5a33-409b-81b5-94b0f768b581
Instance ID                     : uuid:21dbba52-8bb4-4bf1-980f-45119f93cc58
Page Mode                       : UseOutlines
Page Count                      : 20

EXIF Metadata provided by EXIF.tools

Yamaha HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner's Manual Hs8i En Om B0

Navigation menu

Versions of this User Manual:

Views

Navigation