Yamaha PX10/PX8/PX5/PX3 Technical Specifications Px10 En Ts B0

User Manual: Yamaha PX10/PX8/PX5/PX3 Technical Specifications

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

ZR40870

EN
Dimensions

29

430

Specifications
PX10

PX8

1000 W × 2

800 W × 2

500 W × 2

300 W × 2

4Ω

1200 W × 2

1050 W × 2

800 W × 2

500 W × 2

2Ω

700 W × 2

600 W × 2

500 W × 2

300 W × 2

8Ω/Power Boost mode

—

—

800 W × 1

600 W × 1

4Ω/Power Boost mode

—

—

1400 W × 1

1000 W × 1

100 V 50 Hz/60 Hz

Output Power
1 kHz, non-clip,
20 msec burst,
both channels driven
1 kHz, non-clip,
20 msec burst

8Ω

1000 W × 2

800 W × 2

500 W × 2

300 W × 2

4Ω

1200 W × 2

1050 W × 2

800 W × 2

500 W × 2

2Ω

700 W × 2

600 W × 2

500 W × 2

300 W × 2

8Ω/Power Boost mode

—

—

800 W × 1

600 W × 1

4Ω/Power Boost mode

—

—

1200 W × 1

1000 W × 1

Amplifier Type (Output Circuitry)
THD+N

2.5

24.5

8Ω

88

1 kHz, non-clip,
20 msec burst

PX3

120 V 60 Hz, 220 V–240 V 50 Hz/60 Hz

Output Power
1 kHz, non-clip,
20 msec burst,
both channels driven

PX5

Class D, balanced output circuit (BTL)

1 kHz, 10 W

0.1 %

1 kHz, half power

0.3 %

Frequency Response

1 W, 8Ω, 20 Hz to 20 kHz

±1.0 dB

Crosstalk

Half power, 8Ω, 1 kHz, vol. max., input 150Ω shunt

< -60 dB
=

S/N Ratio

A-weighted, 8Ω, gain setting = +14 dBu

388

361 (Mounting Surface to Rear End)

Technical Specifications

Unit: mm

480

101 dB

101 dB

100 dB

100 dB

Gain setting: 32 dB

32.0 dB/+9.3 dBu

32.0 dB/+8.3 dBu

32.0 dB/+6.3 dBu

32.0 dB/+4.1 dBu

Gain setting: 26 dB

26.0 dB/+15.3 dBu

26.0 dB/+14.3 dBu

26.0 dB/+12.3 dBu

26.0 dB/+10.1 dBu

Gain setting: +4 dBu

37.3 dB/+4 dBu

36.3 dB/+4 dBu

34.3 dB/+4 dBu

32.1 dB/+4 dBu

Gain setting: +14 dBu

27.3 dB/+14 dBu

26.3 dB/+14 dBu

24.3 dB/+14 dBu

22.1 dB/+14 dBu

Gain setting: 32 dB

—

—

34.0 dB/+6.3 dBu

35.0 dB/+4.1 dBu

Gain setting: 26 dB

—

—

28.0 dB/+12.3 dBu

29.0 dB/+10.1 dBu

Voltage Gain/Sensitivity
8Ω, Volume max

8Ω, Volume max,
Power Boost mode

Block Diagram

DSP
LIMIT
CLIP
INPUT A

Gain setting: +4 dBu

—

—

36.3 dB/+4 dBu

35.1 dB/+4 dBu

Gain setting: +14 dBu

—

—

26.3 dB/+14 dBu

25.1 dB/+14 dBu

Maximum Input Voltage

20 kΩ (Balanced), 10 kΩ (Unbalanced)

Signal Processing

User Amplifier Preset

HPF

LPF

Polarity

Speaker
Delay *

6-band
PEQ *

Level

DAC

Limiter

Limiter

Mute

AMP

CLIP

DUAL
INPUT PARALLEL
METER SINGLE
SUM

1+
12+
2-

LIMIT

Mute

OUTPUT
METER,
SIGNAL

AMP

FOH/MAIN
MONITOR

A

A:NEGATIVE
CLIP

A

Balance

D-Contour
ADC

LIMIT

Router

A

A:POSITIVE

Input
Router

Delay

HPF

LPF

Polarity

Speaker
Delay *

6-band
PEQ *

Level

Limiter

DAC

Limiter

Mute

AMP

B:POSITIVE
B

* Can be set only from speaker
preset parameters.

Limit,
Mute

XLR-3-31 × 2, 1/4 PHONE(TRS) × 2

Speakers

Protection Logic

AC inlet × 1 with AC cord clamp

USB

USB 2.0 Standard-A Connector (Female) for data save/load (amp settings, speaker preset, log) and
firmware update with USB memory
Depending on area of purchase; 100 V, 50 Hz/60 Hz, 120 V 60 Hz, 220 V–240 V 50 Hz/60 Hz *1

1/8 MAX power, 4Ω, pink noise at all channels

310 W

280 W

230 W

160 W

Idle, 4Ω

60 W

60 W

55 W

55 W

Operating Temperature

0°C to +40°C

Storage Temperature

-20°C to +60°C

Dimensions (W × H × D)
Net Weight

480 × 88 × 388 mm (18.90 × 3.46 × 15.28 inch)
7.4 kg (16.31 lbs)

7.2 kg (15.87 lbs)

6.9 kg (15.21 lbs)

*1 Device operation has been confirmed within +/- 10% of the rated power supply voltage.
* The contents of this manual apply to the latest specifications as of the printing date. To obtain the latest manual, access the Yamaha website then download the manual file.

AMP
B:NEGATIVE

1+
12+
2-

B

FAN x 2

Neutrik speakON NL4 × 2, Binding post × 2 pairs, 1/4" PHONE(TS) × 2

AC IN

AC Power Requirement

1

Delay

Speaker presets for Yamaha passive speakers
Analog input

Power Consumption

HA

FOH/MAIN
MONITOR

8 user amplifier presets

Factory Speaker Preset

Connectors

+4dBu
+14dBu
26dB
Volume 32dB

INPUT B

SPEAKERS
CLIP

D-Contour
ADC

HA
Input
Sensitivity/
Gain

Input summing
D-CONTOUR: FOH/MAIN, MONITOR, OFF
Delay: 0–74msec
HPF/LPF: cutoff frequency 20Hz–20kHz with polarity control
Speaker processor: 6 band PEQ + limiter + delay

Speaker Processor

Volume

+24 dBu

Input Impedance

INPUT
METER

PROTECT OUTPUT
METER,
SIGNAL
Protection Block

LIMIT

6.9 kg (15.21 lbs)

B

Output Voltage

Amplifier Clip

Output Current

DC

Integral Output
Power

Temperature

AC IN
Power Supply

Shutdown

Explanation of Graphical Symbols
Explication des symboles

Current Draw
 PX10
Line
Current (A)
100V/50Hz
100V
Idle
1/8 out
1/3 out

Watt (W)
Powwer
Power
Consumption Consumption
(In)
(out)

kcal/h

195

49

8Ω/ch

2.6

213

125

88

300

76

4Ω/ch

3.1

261

150

111

379

95

8Ω/ch

5.6

472

333

139

474

120

4Ω/ch

7.2

608

400

208

710

179

Watt (W)
Powwer
Power
Consumption Consumption
(In)
(out)

Watts
Dissipated

Btu/h

kcal/h

0.7

60

0

60

205

52

213

125

88

300

76

4Ω/ch

2.7

263

150

113

386

97

8Ω/ch

4.6

466

333

133

454

114

4Ω/ch

5.9

597

400

197

672

169

230V
Idle

0.5

Watt (W)
Powwer
Power
Consumption Consumption
(In)
(out)
62

0

Idle
1/8 out
1/3 out

kcal/h

62

212

53

8Ω/ch

1.4

219

125

94

321

81

4Ω/ch

1.6

271

150

121

413

104

40

8Ω/ch

1.9

122

63

59

201

51

4Ω/ch

2.7

189

100

89

304

77

8Ω/ch

3.6

253

167

86

293

74

4Ω/ch

5.6

424

267

157

536

135

Idle

8Ω/ch

2.7

471

333

138

471

119

4Ω/ch

3.3

602

400

202

689

174

Watt (W)
Powwer
Power
Consumption Consumption
(In)
(out)

Watts
Dissipated

Btu/h

kcal/h

0.8

54

0

54

184

46

1.7

130

63

67

229

58

4Ω/ch

2.4

196

100

96

328

83

8Ω/ch

3.1

259

167

92

314

79

4Ω/ch

4.8

428

267

161

549

138

230V
Idle

1/3 out

Thermal Dissipation

8Ω/ch

Line
Current (A)

1/8 out

kcal/h

157

120V

1/3 out

Btu/h

46

Line
Current (A)

1/8 out

Watts
Dissipated

0

220V-240V/50Hz
Btu/h

Powwer
Power
Consumption Consumption
(In)
(out)

Thermal Dissipation

46

Thermal Dissipation
Watts
Dissipated

Watt (W)

0.8

110V-120V/60Hz

2.2

220V-240V/50Hz

100V

Thermal Dissipation

8Ω/ch

Line
Current (A)

1/3 out

Btu/h

57

Idle

1/8 out

Watts
Dissipated

0

120V

1/3 out

100V/50Hz

57

110V-120V/60Hz

Line
Current (A)

Thermal Dissipation

0.8

Line
Current (A)

1/8 out

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

 PX5

Watt (W)
Powwer
Power
Consumption Consumption
(In)
(out)

L’éclair avec une flèche à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la
présence d’une « tension dangereuse » non isolée à l’intérieur de l’appareil, pouvant être suffisamment élevée pour
constituer un risque d’électrocution.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

The above warning is located on the top of the unit.
L’avertissement ci-dessus est situé sur le dessus de l’unité.

IMPORTANT SAFETY INSTRUCTIONS

PRÉCAUTIONS CONCERNANT LA SÉCURITÉ

1
2
3
4
5
6
7
8

1
2
3
4
5
6
7
8

9

Thermal Dissipation
10

Watts
Dissipated

Btu/h

kcal/h

0

57

195

49

0.5

57

8Ω/ch

1.0

130

63

67

229

58

4Ω/ch

1.4

197

100

97

331

83

8Ω/ch

1.9

259

167

92

314

79

4Ω/ch

2.9

434

267

167

570

144

Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la
présence d’instructions importantes sur l’emploi ou la maintenance (réparation) de l’appareil dans la documentation
fournie.

11
12

13
14

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.

WARNING

 PX8
Line
Current (A)
100V/50Hz
100V
Idle
1/8 out
1/3 out

Watt (W)
Powwer
Power
Consumption Consumption
(In)
(out)

kcal/h

57

0

57

195

49

178

100

78

266

67

4Ω/ch

2.9

237

131

106

362

91

8Ω/ch

4.6

386

267

119

406

102

4Ω/ch

6.4

543

350

193

659

166

Idle

0.7

Watt (W)
Powwer
Power
Consumption Consumption
(In)
(out)
60

0

Btu/h

kcal/h

60

205

52

1.9

182

100

82

280

71

2.5

237

131

106

362

91

8Ω/ch

3.8

385

267

118

403

101

4Ω/ch

5.4

542

350

192

655

165

230V
Idle

Watt (W)
Powwer
Power
Consumption Consumption
(In)
(out)

Idle
1/8 out
1/3 out

0

46

157

40

38

56

191

48

4Ω/ch

2.0

137

63

74

253

64

8Ω/ch

2.6

174

100

74

253

64

4Ω/ch

3.9

285

167

118

403

101

Idle

0.8

0.5

62

0

62

212

53

1.2

184

100

84

287

72

4Ω/ch

1.5

242

131

111

379

95

8Ω/ch

2.2

385

267

118

403

101

4Ω/ch

3.0

544

350

194

662

167

Powwer
Power
Consumption Consumption
(In)
(out)

kcal/h

184

46
53

0

54

1.3

100

38

62

212

1.8

140

63

77

263

66

8Ω/ch

2.3

183

100

83

283

71

4Ω/ch

3.4

291

167

124

423

107

Idle

1/3 out

Btu/h

4Ω/ch

230V

1/8 out

Watts
Dissipated

54

Line
Current (A)

Watt (W)
Powwer
Power
Consumption Consumption
(In)
(out)

11
12

13
14

AVERTISSEMENT
POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À
LA PLUIE OU À L’HUMIDITÉ.
(UL60065_03)

Thermal Dissipation

8Ω/ch

kcal/h

8Ω/ch

Watt (W)

10

kcal/h

46

120V

1/3 out

Btu/h

94

Line
Current (A)

1/8 out

Watts
Dissipated

1.5

220V-240V/50Hz
Btu/h

Powwer
Power
Consumption Consumption
(In)
(out)

Thermal Dissipation

0.8

Thermal Dissipation
Watts
Dissipated

Watt (W)

8Ω/ch

110V-120V/60Hz

Watts
Dissipated

4Ω/ch

220V-240V/50Hz

100V

Thermal Dissipation

8Ω/ch

Line
Current (A)

1/3 out

Btu/h

0.8

120V

1/3 out

100V/50Hz

2.2

110V-120V/60Hz

1/8 out

Watts
Dissipated

(UL60065_03)

Line
Current (A)

Thermal Dissipation

8Ω/ch

Line
Current (A)

1/8 out

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

 PX3

9

Lire ces instructions.
Conserver ces instructions.
Tenir compte de tous les avertissements.
Suivre toutes les instructions.
Ne pas utiliser ce produit à proximité d’eau.
Nettoyer uniquement avec un chiffon propre et sec.
Ne pas bloquer les orifices de ventilation. Installer l’appareil conformément aux instructions du fabricant.
Ne pas installer l’appareil à proximité d’une source de chaleur comme un radiateur, une bouche de chaleur, un
poêle ou tout autre appareil (y compris un amplificateur) produisant de la chaleur.
Ne pas modifier le système de sécurité de la fiche polarisée ou de la fiche de terre. Une fiche polarisée dispose de
deux broches dont une est plus large que l’autre. Une fiche de terre dispose de deux broches et d’une troisième
pour le raccordement à la terre. Cette broche plus large ou cette troisième broche est destinée à assurer la sécurité de l’utilisateur. Si la fiche équipant l’appareil n’est pas compatible avec les prises de courant disponibles, faire
remplacer les prises par un électricien.
Acheminer les cordons d’alimentation de sorte qu’ils ne soient pas piétinés ni coincés, en faisant tout spécialement attention aux fiches, prises de courant et au point de sortie de l’appareil.
Utiliser exclusivement les fixations et accessoires spécifiés par le fabricant.
Utiliser exclusivement le chariot, le stand, le trépied, le support ou la table recommandés par
le fabricant ou vendus avec cet appareil. Si l’appareil est posé sur un chariot, déplacer le
chariot avec précaution pour éviter tout risque de chute et de blessure.
Débrancher l’appareil en cas d’orage ou lorsqu’il doit rester hors service pendant une période prolongée.
Confier toute réparation à un personnel qualifié. Faire réparer l’appareil s’il a subi tout dommage, par exemple si la fiche ou le cordon d’alimentation est endommagé, si du liquide a
coulé ou des objets sont tombés à l’intérieur de l’appareil, si l’appareil a été exposé à la pluie ou à de l’humidité, si
l’appareil ne fonctionne pas normalement ou est tombé.

Thermal Dissipation
Watts
Dissipated

Btu/h

kcal/h

0.5

57

0

57

195

49

8Ω/ch

0.8

101

38

63

215

54

4Ω/ch

1.1

142

63

79

270

68

8Ω/ch

1.4

181

100

81

276

70

4Ω/ch

2.1

293

167

126

430

108

Test signal: Pink noise, bandwidth limited from 22Hz to 22kHz
1 Btu = 1,055.06 J = 0.252 kcal
(W) × 0.86 = kcal

FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual,
meets FCC requirements. Modifications not expressly approved by Yamaha may void
your authority, granted by the FCC, to use the product.

antee that interference will not occur in all installations. If this product is found to be the
source of interference, which can be determined by turning the unit “OFF” and “ON”,
please try to eliminate the problem by using one of the following measures:

2. IMPORTANT: When connecting this product to accessories and/or another product use
only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or
install AC line filter/s.

3. NOTE: This product has been tested and found to comply with the requirements listed in
FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the
operation of other electronic devices. Compliance with FCC regulations does not guar* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

2

Relocate either this product or the device that is being affected by the interference.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna
lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results, please contact the
local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed by Yamaha Corporation
of America or its subsidiaries.
(class B)

Manual Development Group
© 2016 Yamaha Corporation
Published 04/2016 POHD-B0
Printed in China



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Annotate, Fill forms, Extract, Print high-res
Author                          : Manual Development Group, Yamaha Corporation
Create Date                     : 2016:05:06 11:59:35+09:00
Modify Date                     : 2016:05:06 12:01:12+09:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Metadata Date                   : 2016:05:06 12:01:12+09:00
Format                          : application/pdf
Title                           : PX10/PX8/PX5/PX3 Technical Specifications
Creator                         : Manual Development Group, Yamaha Corporation
Document ID                     : uuid:34d3bd47-dfc9-4c5a-86a4-9a8ef11e663b
Instance ID                     : uuid:f5d7a490-37bc-44e7-8044-213efa2dfb84
Page Mode                       : UseNone
Page Count                      : 2

EXIF Metadata provided by EXIF.tools