Yamaha ATS 1060 Quick Start Guide Web Qsg UA En

User Manual: Yamaha ATS-1060 Quick Start Guide

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadYamaha ATS-1060 Quick Start Guide Web Qsg UA En
Open PDF In BrowserView PDF
ATS-1060 Quick Start Guide

UA

EN

Supplied items
Before using the sound bar, make sure you have received all of the following items.

Sound bar (ATS-1060)

Power cable

Optical digital audio cable

Analog audio cable
(RCA plug (L/R)-3.5 mm
mini plug cable)

Preparing the remote control
Remove the battery’s insulating strip before
attempting to use the remote control.

Battery’s insulating strip

Remote control

Mounting template

Spacers × 2

A CR2025 Lithium battery
has already been inserted
into the remote control.

Use when mounting the sound bar on a wall

Use when mounting the
sound bar on a wall

Owner’s Manual

Quick Start Guide
(This sheet)

Installation
Install the sound bar on the TV stand, etc.
The sound bar can also be mounted on a wall, using the included
mounting template and commercially available screws. Refer to the
Owner’s Manual for additional installation instructions.
Caution
• Do not stack the sound bar and a BD player or other device directly on each other.
Doing so may cause a malfunction due to vibrations.

Keys

Manual Development Group
© 2016 Yamaha Corporation
Published 06/2016 KS-A0

ATS-1060/UA/qsg
—1—

Connection
TV
When only a TV will be connected to the sound bar, connect the two using one of the two methods shown below. An optical digital audio cable and an
analog audio cable (RCA plug (L/R)-3.5 mm mini plug cable) are supplied with the sound bar.

1st choice

2nd choice
OPTICAL
OUTPUT

HDMI INPUT
2

1

ANALOG
OUTPUT
L
R

3

TV

HDMI INPUT
2

1

3

TV
1. Remove
the cap

SUBWOOFER OUT

ANALOG

TV

OUT (ARC)

ANALOG

TV

OUT (ARC)

SUBWOOFER OUT

IN

ANALOG

OUT (ARC)

IN
AC IN

HDMI

SUBWOOFER OUT

IN
HDMI

TV

AC IN

HDMI

SUBWOOFER OUT

2. Check the
direction of
the plug

ANALOG

TV

OUT (ARC)

AC IN

IN
HDMI

AC IN

TV and a set-top box, or BD/DVD player

Power cable

When a TV and a playback device will be connected to the sound bar,
connect the three as shown below. HDMI cables are not supplied with the
sound bar. Use third-party HDMI cables.

After all connections are complete, connect the supplied power cable to
the AC IN jack on the sound bar and plug the power cable into an AC wall
outlet.
To an AC wall outlet

TV
Cable, satellite or
network set-top box, or
BD/DVD player

SUBWOOFER OUT

OPTICAL
OUTPUT

1

ANALOG

TV

OUT (ARC)

IN
HDMI

HDMI INPUT
2

AC IN

HDMI OUTPUT

3

SUBWOOFER OUT

ANALOG

TV

OUT (ARC)

IN
HDMI

AC IN

Watching TV

1
2

Press z (power) key to turn on the sound bar.
Press the TV key to select TV as the input source.
NOTE

SUBWOOFER OUT

ANALOG

TV

OUT (ARC)
HDMI

SUBWOOFER OUT

ANALOG

TV

OUT (ARC)

AC IN

IN
HDMI

• Press the ANALOG key if the sound bar and TV are connected as shown with “2nd
choice” above. Press the HDMI key to watch a TV program received via set-top
box.

IN

AC IN

When a TV that supports Audio Return Channel (ARC) will be
connected, the sound bar can only play audio from the TV when it is
connected as shown above.
What is Audio Return Channel (ARC)?
In order for the sound bar to play audio from a TV, the TV must usually
be connected to the sound bar via an audio cable as well as an HDMI
cable. If, however, the TV supports Audio Return Channel (ARC), TV
audio signals can be input to the sound bar via the HDMI cable that
outputs video signals from the sound bar to the TV.

3
4

Select the desired input source on the TV.
Press the VOLUME (+/–) keys to adjust the volume.

For details, refer to the Owner’s Manual.

... and more features!
– “HOME THEATER CONTROLLER” sound bar control app
– Bluetooth connection
– Clear voice
The sound bar is equipped with a number of other functions not
described in the Quick Start Guide. See the Owner’s Manual for details.

—2—
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2016:07:08 15:25:16+09:00
Modify Date                     : 2016:07:08 15:25:16+09:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:07:08 15:25:16+09:00
Format                          : application/pdf
Document ID                     : uuid:dc36e234-a71b-4fe0-ba21-ec9a2f452de0
Instance ID                     : uuid:c0ff862c-c6a1-4301-b452-0ae6c38d6bf6
Page Mode                       : UseOutlines
Page Count                      : 2
EXIF Metadata provided by EXIF.tools

Navigation menu