Yamaha YDP 103 Owner’s Manual Ydp103 En Om C0

User Manual: Yamaha YDP-103 Owner’s Manual

Open the PDF directly: View PDF PDF.
Page Count: 28

DownloadYamaha YDP-103 Owner’s Manual Ydp103 En Om C0
Open PDF In BrowserView PDF
YDP - 103

Owner’s Manual
Before using the instrument, be sure to read “PRECAUTIONS” on pages 5-7.
For information on assembling the instrument, refer to the instructions at the end of this
manual.

EN

2

YDP-103 Owner’s Manual

YDP-103 Owner’s Manual

3

4

YDP-103 Owner’s Manual

PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.

For AC adaptor
WARNING

CAUTION

• This AC adaptor is designed for use with only Yamaha electronic instruments. Do
not use for any other purpose.
• Indoor use only. Do not use in any wet environments.

• When setting up, make sure that the AC outlet is easily accessible. If some
trouble or malfunction occurs, immediately turn off the power switch of the
instrument and disconnect the AC adaptor from the outlet. When the AC adaptor
is connected to the AC outlet, keep in mind that electricity is flowing at the
minimum level, even if the power switch is turned off. When you are not using
the instrument for a long time, make sure to unplug the power cord from the wall
AC outlet.

For YDP-103
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the
following:

Power supply/AC adaptor

Water warning

• Do not place the power cord near heat sources such as heaters or radiators. Also,
do not excessively bend or otherwise damage the cord, or place heavy objects on
it.
• Only use the voltage specified as correct for the instrument. The required voltage
is printed on the name plate of the instrument.
• Use the specified adaptor (page 25) only. Using the wrong adaptor can result in
damage to the instrument or overheating.

• Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place on it any containers (such as vases, bottles or glasses)
containing liquids which might spill into any openings. If any liquid such as
water seeps into the instrument, turn off the power immediately and unplug the
power cord from the AC outlet. Then have the instrument inspected by qualified
Yamaha service personnel.
• Never insert or remove an electric plug with wet hands.

• Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.

Fire warning
• Do not put burning items, such as candles, on the unit. A burning item may fall
over and cause a fire.

Do not open
• This instrument contains no user-serviceable parts. Do not open the instrument
or attempt to disassemble or modify the internal components in any way. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.

If you notice any abnormality
• When one of the following problems occur, immediately turn off the power switch
and disconnect the electric plug from the outlet. Then have the device inspected
by Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.

DMI-5

1/2
YDP-103 Owner’s Manual

5

CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:

Power supply/AC adaptor

Connections

• Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.

• Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all components,
set all volume levels to minimum.

• When removing the electric plug from the instrument or an outlet, always hold
the plug itself and not the cord. Pulling by the cord can damage it.

• Be sure to set the volumes of all components at their minimum levels and
gradually raise the volume controls while playing the instrument to set the
desired listening level.

• Remove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.

Handling caution
Assembly

• Do not insert a finger or hand in any gaps on the key cover or instrument. Also
take care that the key cover does not pinch your finger.

• Read carefully the attached documentation explaining the assembly process.
Failure to assemble the instrument in the proper sequence might result in
damage to the instrument or even injury.

• Never insert or drop paper, metallic, or other objects into the gaps on the key
cover, panel or keyboard. This could cause physical injury to you or others,
damage to the instrument or other property, or operational failure.
• Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the buttons, switches or connectors.

Location
• Do not place the instrument in an unstable position where it might accidentally
fall over.
• When transporting or moving the instrument, always use two or more people.
Attempting to lift the instrument by yourself may damage your back, result in
other injury, or cause damage to the instrument itself.
• Before moving the instrument, remove all connected cables, to prevent damage
to the cables or injury to anyone who might trip over them.
• When setting up the product, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet. Even when the power switch is
turned off, electricity is still flowing to the product at the minimum level. When
you are not using the product for a long time, make sure to unplug the power
cord from the wall AC outlet.

• Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing
loss. If you experience any hearing loss or ringing in the ears, consult a
physician.

Using the bench (If included)
• Do not place the bench in an unstable position where it might accidentally fall
over.
• Do not play carelessly with or stand on the bench. Using it as a tool or stepladder
or for any other purpose might result in accident or injury.
• Only one person should sit on the bench at a time, in order to prevent the
possibility of accident or injury.
• If the bench screws become loose due to extensive long-term use, tighten them
periodically using the included tool.

• Use only the stand specified for the instrument. When attaching it, use the
provided screws only. Failure to do so could cause damage to the internal
components or result in the instrument falling over.

• Keep special watch over any small children so that they don’t fall off the rear of
the bench. Since the bench does not have a backrest, unsupervised use may
result in accident or injury.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.
Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level.
When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

The model number, serial number, power requirements, etc., may be found on
or near the name plate, which is at the bottom of the unit. You should note this
serial number in the space provided below and retain this manual as a permanent record of your purchase to aid identification in the event of theft.

Model No.
Serial No.
(bottom_en_01)

6

DMI-5
YDP-103 Owner’s Manual

2/2

The name plate is located on the bottom of the unit.

NOTICE

Information

To avoid the possibility of malfunction/ damage to the product,
damage to data, or damage to other property, follow the notices
below.

 About copyrights

 Handling

• Copying of the commercially available musical data
including but not limited to MIDI data and/or audio data is
strictly prohibited except for your personal use.

• Do not use the instrument in the vicinity of a TV, radio,
stereo equipment, mobile phone, or other electric devices.
Otherwise, the instrument, TV, or radio may generate noise.
When you use the instrument along with an application on
your iPad, iPhone or iPod touch, we recommend that you set
“Airplane Mode” to “ON” on that device in order to avoid
noise caused by communication.

• This product incorporates and bundles contents in which
Yamaha owns copyrights or with respect to which Yamaha
has license to use others' copyrights. Due to copyright laws
and other relevant laws, you are NOT allowed to distribute
media in which these contents are saved or recorded and
remain virtually the same or very similar to those in the
product.

• Do not expose the instrument to excessive dust or
vibrations, or extreme cold or heat (such as in direct
sunlight, near a heater, or in a car during the day) to prevent
the possibility of panel disfiguration, damage to the internal
components or unstable operation. (Verified operating
temperature range: 5° – 40°C, or 41° – 104°F.)

* The contents described above include a computer
program, Accompaniment Style data, MIDI data, WAVE
data, voice recording data, a score, score data, etc.

• Do not place vinyl, plastic or rubber objects on the
instrument, since this might discolor the panel or keyboard.

 Maintenance
• When cleaning the instrument, use a soft and dry/slightly
damp cloth. Do not use paint thinners, solvents, alcohol,
cleaning fluids, or chemical-impregnated wiping cloths.
• During extreme changes in temperature or humidity,
condensation may occur and water may collect on the
surface of the instrument. If water is left, the wooden parts
may absorb the water and be damaged. Make sure to wipe
any water off immediately with a soft cloth.

 Saving data
• Some types of data (page 21) will be stored in internal
memory, and maintained even if the power is turned off.
However, the data could be lost due to malfunction or
incorrect operation.

* You are allowed to distribute medium in which your
performance or music production using these contents is
recorded, and the permission of Yamaha Corporation is
not required in such cases.

 About functions/data bundled with the
instrument
• Some of the preset songs have been edited for length or
arrangement, and may not be exactly the same as the
original.

 About this manual
• The illustrations as shown in this manual are for
instructional purposes only, and may appear somewhat
different from those on your instrument.
• iPhone, iPad and iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
• The company names and product names in this manual are
the trademarks or registered trademarks of their respective
companies.

 Tuning
• Unlike an acoustic piano, this instrument does not need to
be tuned by an expert (although the pitch can be useradjusted to match other instruments). This is because the
pitch of digital instruments is always maintained perfectly.

YDP-103 Owner’s Manual

7

Table of Contents
PRECAUTIONS .................................... 5

Included Accessories ............................. 9

Connecting an iPad or iPhone ............................... 20
Connecting to a computer ...................................... 20
MIDI Settings ........................................................... 20

Panel Controls and Terminals .............10

Data Backup and Initializing .............. 21

Introduction

Appendix

Setting Up .............................................11

Troubleshooting .................................. 21

Key Cover ..................................................................11
Music Rest .................................................................11
Turning the Power On.............................................12
Setting the Volume...................................................12
Auto Power Off Function........................................13
Setting the Operation Confirmation Sounds........13
Using Headphones ...................................................13

Keyboard Stand Assembly ................... 22

About the Manuals ................................ 9

Reference
Selecting & Playing Voices ...................14
Selecting a Voice .......................................................14
Layering Two Voices (Dual) ...................................14
Playing Duo...............................................................15
Adding Variations to the Sound (Reverb) ............15
Setting the Touch Sensitivity ..................................16
Transposing the Pitch in Semitones ......................16
Fine-tuning the Pitch ...............................................16
Using the Pedals........................................................17

Playing Back Songs...............................18
Listening to the Voice Demo Songs.......................18
Listening to the Piano Songs (Preset Songs).........18

Using the Metronome ..........................19
Selecting a Beat .........................................................19
Adjusting the Tempo ...............................................19
Adjusting the Volume of the Metronome.............19

8

Connecting Other Equipment............. 20

YDP-103 Owner’s Manual

Specifications ....................................... 25
Index..................................................... 26

Thank you for choosing the Yamaha digital piano.
In order to make the most of the performance potential and features of the instrument,
please read the manuals thoroughly, and keep them in a handy place for later reference.

About the Manuals

Included Accessories

This instrument has the following manuals.

• Owner’s Manual (this book)

 Included Manuals

• Quick Operation Guide (separate sheet)

Owner’s Manual (this book)
Explains how to use the instrument.

Quick Operation Guide (separate
sheet)
Shows in chart form the functions assigned to the
buttons and the keyboard for quick
understanding.

 Online Manuals (PDF)
iPhone/iPad Connection Manual
Explains how to connect the instrument to a smart
device, such as iPhone, iPad.

Computer-related Operations
Includes instructions on connecting this
instrument to a computer, and operations related
to transferring song data.

MIDI Reference
Contains the MIDI Data Format and MIDI
Implementation chart, as well as descriptions on
MIDI functions such as MIDI channel and Local
Control settings.

MIDI Basics (only in English, French
and German)
Contains basic explanations about MIDI.

• Online Member Product Registration*1
• Warranty*2
• AC adaptor*2
• Bench*2
*1 You will need the PRODUCT ID on the sheet in order
to fill out the User Registration form.
*2 May not be included depending on your particular
area. Please check with your Yamaha dealer.

Smart device application
– Digital Piano Controller
With the specially developed Digital Piano
Controller app running on your iPhone, iPad,
or iPod touch, you can remotely control your
digital piano for even more convenience and
flexibility. By presenting various parameters
on-screen, this app allows you to make
settings in a visual, more intuitive manner. For
more details on Digital Piano Controller, refer
to the following Yamaha web site.
http://yamaha.com/kbdapps/
For instructions on connecting the
instrument to a smart-device, refer to the
“iPhone/iPad Connection Manual.”

To obtain these materials, access the Yamaha
Downloads website, then enter the model name for
searching the desired files.

Yamaha Downloads
http://download.yamaha.com/

YDP-103 Owner’s Manual

9

Panel Controls and Terminals
1

2
3

8

Bottom

Bottom

Bottom

5

7

6

4

(Keyboard side)

(Keyboard side)

(Keyboard side)

1

[P] (Standby/On) switch......................... page 12

6

For turning the power on or setting to standby.
2

[MASTER VOLUME] knob ..................... page 12

For connecting the pedal cord.
7

For adjusting the volume of the entire sound.
3

[GRAND PIANO/FUNCTION] button
....................................pages 14, 15, 16, 18, 19, 20
For instantly calling up the Grand Piano 1 Voice.

FUNCTION
You can set various parameters by pressing a note on
the keyboard while holding this button.
4

[PHONES] jacks....................................... page 13
For connecting a set of standard stereo headphones.

5

[USB TO HOST] terminal
For connecting to a computer or a smart device such
as iPhone or iPad. Refer to the online manual
“Computer-related Operations” for connection to a
computer. For instructions on using MIDI, refer to
the online manual “MIDI Reference” (page 9).
NOTICE
Use an AB type USB cable of less than 3 meters.
USB 3.0 cables cannot be used.

10

YDP-103 Owner’s Manual

[TO PEDAL] jack ..................................... page 23
DC IN jack................................................ page 12
For connecting the AC adaptor.

8

Pedals ....................................................... page 17
For controlling expression and sustain, just as on an
acoustic piano.

Introduction
Setting Up
Key Cover

Music Rest

To open the key cover:
Lift the cover slightly, then push and slide it to the
end.

To raise the music rest:

3

1

To close the key cover:
Slide the cover toward you and gently lower the
cover over the keys.

2

1. Pull the music rest up and toward
yourself as far as it will go.

2. Flip down the two metal supports at the
left and right on the rear of the music
rest.

CAUTION
Be careful to avoid catching
your fingers when opening or
closing the cover.

3. Lower the music rest so that it rests on
the metal supports.

To lower the music rest:
CAUTION
• Hold the cover with both hands when opening or closing it.
Do not release it until it is fully opened or closed. Be careful to avoid catching fingers (yours or others, especially
children’s) between the cover and main unit.
• Do not place objects, such as a piece of metal or paper, on
top of the key cover. Small objects placed on the key cover
may fall inside the unit when the cover is opened and may
be nearly impossible to remove. This could cause electric
shock, short circuit, fire or other serious damage to the
instrument.

1

3
2

1. Pull the music rest toward yourself as far
as it will go.

2. Raise the two metal supports (at the rear
of the music rest).

3. Gently lower the music rest backward
until it is all the way down.
CAUTION
Do not try to use the music rest in a half-raised position.
When lowering the music rest, do not release your hands
from the music rest until it is all the way down.

YDP-103 Owner’s Manual

11

Setting Up

2. Press the [P] (Standby/On) switch to

Turning the Power On

turn the power on.

1. Connect the plugs of the AC adaptor in

[P] (Standby/On) switch

the order shown in the illustration.

DC IN jack (page 10)

1
DC plug
AC outlet

2
AC adaptor

The shape of the plug and outlet differ depending on the
locale.

WARNING
Use the specified adaptor (page 25) only. The use of other
adaptors may result in irreparable damage to both the adaptor
and the instrument.

CAUTION
Remove the AC plug from the AC outlet when the instrument
is not to be used for extended periods of time, or during electrical storms.

NOTE
Follow this procedure in reverse order when disconnecting the
AC adaptor.

For the Power Adaptor with a Removable Plug
Do not remove the plug from the power adaptor. If
the plug is removed accidentally, slide the plug into
place without touching the metallic parts, and then
push the plug in completely until it clicks.
Plug
Slide the plug
as indicated

Power indicator

Power indicator
If you close the key cover without turning the
power to standby, the power indicator remains lit,
indicating that the power is still on.
When you’re ready to turn the power to standby,
press the [P] (Standby/On) switch again for a second. The power indicator turns off.
CAUTION
Even when the [P] (Standby/On) switch is in the standby status, electricity is still flowing to the instrument at a minimum
level. When not using the instrument for an extended period
of time, be sure to unplug the power cord from the wall AC
outlet.

Setting the Volume
When you start playing, use the [MASTER VOLUME] knob to adjust the volume of the entire keyboard sound.
Level decreases

Level increases

The shape of the plug and outlet differ depending on the locale.

WARNING
• Make sure to keep the plug attached to the AC adaptor.
Using the plug alone can cause electric shock or fire.
• Never touch the metallic section when attaching the plug.
To avoid electric shock, short circuit or damage, also be
careful that there is no dust between the AC adaptor and
plug.

12

YDP-103 Owner’s Manual

CAUTION
Do not use this instrument at a high volume level for a long
period of time, to avoid damaging your hearing.

Setting Up

Auto Power Off Function

Setting the Operation Confirmation
Sounds On or Off

To prevent unnecessary power consumption, this
function automatically turns the power off if no
buttons or keys are operated for approximately 30
minutes. If desired, you can disable or enable this
function.

When a setup is changed using a button and key
combination, an operation sound (“On,” “Off,”
click, tempo value input) is sounded. This confirmation sound can be enabled (ON) or disabled
(OFF) as desired.

To disable the Auto Power Off function:

Turning the Operation Confirmation Sounds on

When the instrument is turned off:
While holding down the lowest key (A-1), press the
[P] (Standby/On) switch to turn on the power so that
the power indicator flashes three times, after which the
Auto Power Off function is disabled.

Press the C7 key while holding down [GRAND PIANO/
FUNCTION].

Turning the Operation Confirmation Sounds off
Press the C7 key while holding down [GRAND PIANO/
FUNCTION].
Default setting: on

A-1
C7

When the instrument is turned on:
While holding down [GRAND PIANO/FUNCTION],
press the lowest key (A-1).

Using Headphones
A-1

To enable the Auto Power Off function:
While holding down [GRAND PIANO/FUNCTION], press the A♯-1 key.

Since this instrument is equipped with two
[PHONES] jacks, you can connect two sets of standard stereo headphones. If you are using only one
set of headphones, insert a plug into either jack.
Inserting headphones automatically turns off the
speakers.

A#-1

Bottom surface

Because of the simple, piano-like design of this
instrument, there are a minimum of panel controls,
and most settings are made using the keys of the
keyboard. When you turn a function on or off, or
change a setting, the instrument produces a sound
to confirm the change. For a list of the functions
assigned to the buttons and keys, see the included
“Quick Operation Guide.”

PHONES

Setting the Operation
Confirmation Sounds

Standard stereo phone plug

CAUTION
Do not use headphones at a high volume for an extended
period of time; doing so may cause hearing loss.

YDP-103 Owner’s Manual

13

Reference
Selecting & Playing Voices
Selecting a Voice

Layering Two Voices (Dual)

To select the Grand Piano Voice:
Simply press [GRAND PIANO/FUNCTION] to
instantly call up the Grand Piano 1 Voice — no matter
what other Voice is called up or other settings are
made.

You can play Voices simultaneously across the entire
range of the keyboard.

1

Engage Dual.
While holding down [GRAND PIANO/FUNCTION], simultaneously press any two desired keys
from C0 –A0.

To select another Voice:

С0

A0

While holding [GRAND PIANO/FUNCTION], press
one of the C0 – A0 keys.
The Voice assigned to the left side key is Voice 1,
while the Voice assigned to the right side key is Voice
2.
С0

A0

Voice List
Key

Voice
Name

Description

GRAND
PIANO 1

Recorded samples from a full concert grand
piano. Perfect for classical compositions as
well as any other style that requires acoustic
piano.

C#0

GRAND
PIANO 2

Bright piano sound. Clear tone helps the
sound to “cut through” when playing in an
ensemble.

D0

E. PIANO 1

Vintage electric piano sound of hammerstruck metallic “tines.” Soft tone when played
lightly, and an aggressive tone when played
hard.

D#0

E. PIANO 2

An electronic piano sound created by FM
synthesis. Good for standard popular music.

E0

PIPE
ORGAN 1

A typical pipe organ sound (8 feet + 4 feet +
2 feet). Good for sacred music from the
Baroque period.

F0

PIPE
ORGAN 2

This is the organ’s full coupler sound, often
associated with Bach’s “Toccata and Fugue.”

F#0

STRINGS

Spacious and large-scale string ensemble.
Try combining this Voice with piano in DUAL.

G0

HARPSICHORD 1

The definitive instrument for baroque music.
Authentic harpsichord sound, with plucked
strings, no touch response.

G#0

HARPSICHORD 2

Mixes the same Voice an octave higher for a
more brilliant, dynamic tone.

A0

VIBRAPHONE

Played with relatively soft mallets.

C0

After selecting the desired Voice, play the
keyboard.

2

To exit from Dual, simply press [GRAND
PIANO/FUNCTION].

To shift the Octave for each Voice:
While holding down [GRAND PIANO/FUNCTION],
press one of the F5 – A#5 keys.
Voice 1 Voice 2

F5

Voice 1

F5

-1

F#5

0

G5

+1

A#5

G#5
Voice 2

-1

A5

0

A#5

+1

To adjust the Balance between two
Voices:
This operation adjusts the level of Voice 1, relative to
Voice 2. While holding down [GRAND PIANO/
FUNCTION], press the B5 key to decrease by one,
C#6 to increase by one, or C6 to set to 0 (equal balance). The setting range is from -6 to +6. Settings
above “0” increase the volume of Voice 1, and vice
versa.
C#6 (+1)

NOTE
To familiarize yourself with the characteristics of the Voices, listen
to the Demo Songs for each Voice (page 18).
B5 (-1)

14

YDP-103 Owner’s Manual

C6 (0)

Selecting & Playing Voices

Playing Duo
This function allows two different players to play the
instrument, one on the left and the other on the right,
over the same octave range.

1

Adding Variations to the Sound
(Reverb)

While holding down [GRAND PIANO/
FUNCTION], press the B-1 key to engage
Duo.

This instrument features several Reverb Types that
add extra depth and expression to the sound to create
a realistic acoustic ambience. Although the appropriate Reverb Type is called up automatically when you
select each of the Voices, you can change the Reverb
Type as desired.

The keyboard is divided into the two sections with
the E3 key as the Split Point.

To select a Reverb Type:
While holding down [GRAND PIANO/FUNCTION],
press one of the C5 – E5 keys.

B-1
Equivalent to C3
(Center)

Split Point (E3)

Equivalent to C3
(Center)

C5

E5

Reverb Type List
Left Voice (Voice 2)

Right Voice (Voice 1)

NOTE
• The Split Point cannot be changed from E3.
• If the keyboard is in Dual mode, engaging Duo will exit from
Dual, and Voice 1 is used over the entire range of the
keyboard.
• Changing the Voice will exit from Duo.

2

One person can play the left section of the
keyboard while the other plays the right.
Sounds played with the left voice are played from the
left speaker, and sounds played with the right voice
are played from the right speaker.

3

To exit from Duo, press the B-1 key while
holding [GRAND PIANO/FUNCTION]
again.

To shift the Octave for each Voice:
Same as in Dual (page 14).

Pedal function in Duo
Damper Pedal: Applies Sustain to the right section.
Sostenuto Pedal: Applies Sustain to both sections.
Soft Pedal: Applies Sustain to the left section.

Key

Reverb
Type

Description

C5

Room

Adds a continuous reverb effect to the
sound, similar to the acoustic reverberation you would hear in a room.

C#5

Hall1

For a bigger reverb sound. This effect
simulates the natural reverberation of a
small-size concert hall.

D5

Hall2

For a truly spacious reverb sound. This
effect simulates the natural reverberation
of a large concert hall.

D#5

Stage

Simulates the reverb of a stage environment.

E5

Off

No effect is applied.

NOTE
In Dual, the Reverb Type for Voice 1 is called up by default. If
“OFF” is assigned to Voice 1, the Reverb Type for the Voice 2 is
called up.

To adjust Reverb Depth:
While holding down [GRAND PIANO/FUNCTION],
press the A4 key to decrease by one, B4 to increase by
one, or A#4 to reset to the default value (most suitable
value for the current Voice). The higher the value, the
deeper the effect.
Default setting: the setting best suited for the current
Voice
Setting range: 0 (no effect) – 10 (maximum depth)
A#4 (Default)

A4
(-1)

B4
(+1)

YDP-103 Owner’s Manual

15

Selecting & Playing Voices

Setting the Touch Sensitivity
You can specify the Touch Sensitivity (how the sound
responds to your playing strength).
While holding down [GRAND PIANO/FUNCTION],
each press of the G4 key switches the Touch Sensitivity setting in sequence: Fixed, Soft, Medium and
Hard. Also, when Operation Confirmation Sounds is
set to “On,” the number corresponding to the setting
of the Touch Sensitivity is spoken.

To transpose the pitch up:
While holding down [GRAND PIANO/FUNCTION],
press the G6 key to increase by 1 semitone.

To restore the original pitch:
While holding down [GRAND PIANO/FUNCTION],
press the F#6 key.
F#6 (Original pitch)

F6 (-1) G6 (+1)

G4

Fine-tuning the Pitch
G4

Touch Sensitivity
Voice
Confirmation

Touch
Sensitivity

Description

Setting range: 414.8 – 440.0 – 466.8 Hz
Fixed

The volume level does not change at all
regardless of whether you play the keyboard soft or hard.

1

Soft

The volume level does not change
much when you play the keyboard soft
or hard.

2

Medium

This is the standard piano touch
response (default setting).

Hard

The volume level changes very widely
from pianissimo to fortissimo to facilitate dynamic and dramatic expression.
You have to hit the keys hard to produce a loud sound.

0

3

You can fine tune the pitch of the entire instrument in
approximately 0.2 Hz increments. This lets you accurately match the keyboard pitch to that of other
instruments or CD music.

To lower the pitch:
While holding down [GRAND PIANO/FUNCTION],
press the G#6 key repeatedly to lower the pitch in
approximately 0.2 Hz increments.

To raise the pitch:

NOTE

While holding down [GRAND PIANO/FUNCTION],
press the A6 key repeatedly to raise the pitch in
approximately 0.2 Hz increments.

The Touch Sensitivity settings may have little or no effect with the
PIPE ORGAN and HARPSICHORD Voices, since these
instruments are not normally responsive to keyboard dynamics.

To set the pitch to A3 = 442 Hz:
While holding down [GRAND PIANO/FUNCTION],
press the A#6 key.

Transposing the Pitch in Semitones
You can shift the pitch of the entire keyboard up or
down in semitone in order to facilitate playing in difficult key signatures, or to easily match the pitch of
the keyboard to the range of a singer or other instruments. For example, if “+5” is selected, playing key C
produces pitch F, letting you play a song of F major as
though it were in C major.

To reset the pitch to the default (A3 =
440 Hz):
While holding down [GRAND PIANO/FUNCTION],
press the B6 key.
G#6 (-0.2 Hz) A#6 (442.0 Hz)

Setting range: -6 – 0 – +6
A6 (+0.2 Hz) B6 (440.0 Hz)

To transpose the pitch down:
While holding down [GRAND PIANO/FUNCTION],
press the F6 key to decrease by 1 semitone.

16

YDP-103 Owner’s Manual

Selecting & Playing Voices

Using the Pedals
Damper Pedal (Right)

Soft Pedal (Left)
Pressing this pedal will reduce the volume and
slightly change the timbre of the notes. The notes
played before this pedal is pressed are not affected.

Pressing this pedal will sustain notes longer.
Releasing this pedal immediately stops (damps)
any sustained notes. This pedal also features a
“half-pedal” function that creates partial sustain
effects, depending on how far down you press the
pedal.

When you press the damper pedal here,
this note and the notes you play before you
release the pedal sustain longer.

NOTE
If the damper pedal doesn’t work, make sure that the pedal cord
is properly plugged into the main unit (page 23).

Half-pedal function
This function allows you to vary the sustain length depending on
how far the pedal is pressed. The farther down you press the
pedal, the more the sound sustains. For example, if you press the
damper pedal and all notes you are playing sound a bit murky
and loud with too much sustain, you can release the pedal half
way or higher to decrease the sustain (murkiness).

Sostenuto Pedal (Center)
Pressing this pedal while holding the notes will
sustain the pressed notes (as if the Damper Pedal
had been pressed), but all subsequently played
notes will not be sustained. This makes it possible
to sustain a chord or single low note, for example,
while the other notes are played “staccato.”

When you press the sostenuto pedal here
while holding the note, the note will sustain as
long as you hold the pedal.

NOTE
While the sostenuto pedal is held, the organ and strings Voices
sound continuously without decay after the notes have been
released.

YDP-103 Owner’s Manual

17

Playing Back Songs
Listening to the Voice Demo Songs
Demo Songs are provided for each of the Voices such
as Piano and Organ.

1

While holding down [GRAND PIANO/
FUNCTION], press one of the C1 – A1
keys to start playback.

Listening to the Piano Songs
(Preset Songs)
In addition to the Demo Songs, a variety of Preset
Songs are provided for your listening pleasure.

1

This operation starts playback of the Demo Song of
the Voice assigned to the pressed key. Starting with
the selected Song, playback will continue in
sequence.

While holding down [GRAND PIANO/
FUNCTION], press one of the C2 – A2
keys to start playback.
Starting with the selected Song, playback will continue in sequence.

A2

C1

A1

NOTE
The keyboard Voice is automatically set to correspond to that
of the current Demo Song. If you select another Voice during
playback, the Demo Song will automatically change to that
corresponding to the selected new Voice.

C2

A2

Preset Song List
Demo Song List
Key
C1

Voice Name
GRAND PIANO 1

Key
Title
Blumenlied

Composer

Title

C2

1

Menuett G dur
BWV.Anh.114

G.Lange

Composer
J.S. Bach

C#1 GRAND PIANO 2

Original

Original

C#2

2

Turkish March

W.A. Mozart

D1

Original

Original

D2

3

Für Elise

L.v. Beethoven

E. PIANO 1

D#1 E. PIANO 2

Original

Original

D#2

4

Valse op.64-1 “Petit chien”

F.F. Chopin

E1

Original

Original

E2

5

Träumerei

R. Schumann

F2

6

Dolly’s Dreaming and
Awakening

T. Oesten
J.F. Burgmüller

PIPE ORGAN 1

F1

PIPE ORGAN 2

Original

Original

F#1

STRINGS

Original

Original

G1

HARPSICHORD 1

Gavotte

J.S. Bach

G#1 HARPSICHORD 2
A1

VIBRAPHONE

Invention No. 1
Original

J.S. Bach
Original

The demonstration pieces listed above are short rearranged
excerpts of the original compositions. All other songs are original
(© 2016 Yamaha Corporation).

2

No.

Press [GRAND PIANO/FUNCTION]
again to stop playback.

2

F#2

7

Arabesque

G2

8

Humoresque

A. Dvořák

G#2

9

The Entertainer

S. Joplin

A2

10

La Fille aux Cheveux de Lin C.A. Debussy

Press [GRAND PIANO/FUNCTION]
again to stop playback.

To adjust the playback tempo:
To adjust the playback tempo:
The operation is same as that of the Metronome
Tempo (page 19).

18

YDP-103 Owner’s Manual

The operation is same as that of Metronome Tempo
(page 19).

Using the Metronome
The metronome is convenient for practicing with an accurate tempo.

1

While holding down [GRAND PIANO/
FUNCTION], press the C3 key to start
the Metronome.

C3

2

Execute the same operation again to stop
the Metronome.

Adjusting the Tempo
While holding down [GRAND PIANO/FUNCTION],
press the D3 – B3 keys (to which numbers 0 – 9 are
assigned individually) to specify the three-digit value
as a Tempo of the Metronome and Song. To specify
“95,” for example, press the B3 (0), A#3 (9) and F#3
(5) keys in order while holding down [GRAND
PIANO/FUNCTION].
Default setting (Metronome): 120
Setting range: 32 – 280

NOTE
Pressing only [GRAND PIANO/FUNCTION] also stops the
Metronome, but it also resets to the Grand Piano Voice.
D3

B3

To restore the default value:

Selecting a Beat
While holding down [GRAND PIANO/FUNCTION],
press the C#4 key to decrease the value, or the D4 key
to increase the value. The default value is “no beat.”
When a value other than “no beat” is selected, the first
beat is accented with a bell sound.
C#4

While holding down [GRAND PIANO/FUNCTION],
press the C4 key.

Voice confirmation of current Tempo
value (in English)
While holding down [GRAND PIANO/FUNCTION],
press the C#3 key.
C#3

D4

Adjusting the Volume of the
Metronome
While holding down [GRAND PIANO/FUNCTION],
press the D#4 key to decrease the volume of the Metronome, the F4 key to increase the volume, or the E4
to restore the default volume (10).
Setting range: 1 – 20
D#4

F4

YDP-103 Owner’s Manual

19

Connecting Other Equipment
CAUTION
Before connecting the instrument to other electronic components, turn off the power to all the components. Before turning the
power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components
may result.

Connecting an iPad or iPhone
With an iPad or iPhone connected to your digital
piano, you can use a wide range of apps to expand the
functionality of your instrument in exciting new ways.
For details on how to connect the devices, refer to the
“iPhone/iPad Connection Manual” (page 9), which
you can download for free from the Yamaha web site.

Connecting to a computer
By connecting a computer to the [USB TO HOST]
terminal, you can take advantage of various music
software with your computer and the instrument.
For details on using a computer with this instrument,
refer to the “Computer-related Operations” on the
website.

MIDI Settings
Setting the MIDI Transmit Channels
In any MIDI control setup, the MIDI channels of the
transmitting and receiving devices must be matched
for proper data transfer. You can specify the channel
on which this instrument transmits MIDI data. To do
this, while holding down [GRAND PIANO/FUNCTION], press one of the D6 – E6 keys. The D6 key
decreases the value by 1, the E6 key increases the
value by 1, and the D#6 key restores the default value
(channel 1).
Setting range: 1 – 16
Default value: 1
D#6 (Default)

Instrument

D6 (-1) E6 (+1)

NOTE
• In Dual, the keyboard performance via Voice 1 is transmitted on
the specified MIDI Transmit Channel and the keyboard
performance via Voice 2 is transmitted on the next channel
number in sequence (specified channel + 1).
• No MIDI messages are output during playback of the Demo
Song or Preset Song.

[USB TO HOST]
terminal

Computer

USB cable

NOTE
Use an AB type USB cable. When connecting a USB cable, make
sure that the length is less than 3 meters.

Other MIDI Settings
The MIDI settings other than the Transmit Channel
are set as listed below, and cannot be changed.
• MIDI Receive Channels: ........... All channels (1 – 16)
• Local Control: ............................................................On
• Program Change Transmit/Receive:.......................Yes
• Control Change Transmit/Receive:.........................Yes

20

YDP-103 Owner’s Manual

Data Backup and Initializing
The following data will automatically be maintained as backup data even if you turn off the power.

Backup data
Metronome Volume, Metronome Beat, Touch Sensitivity, Tuning, Auto Power Off, Operation Confirmation
Sound on/off

To initialize the backup data:
While holding down the C7 key (right-most key), turn the power on to initialize the backup data to the factory initial settings.
C7

NOTICE
Never turn off the power while the initialization is being executed.

NOTE
If this instrument somehow malfunctions or fails to operate properly, try executing the initialization.

Appendix
Troubleshooting
Problem

Possible Cause and Solution

Power suddenly and
unexpectedly turns off.

This is normal and the Auto Power Off function may have been activated (page 13).
If desired, disable the Auto Power Off function.

The instrument does not
turn on.

The plugs are not properly connected. Make sure that the DC plug is securely inserted into
the DC IN jack on the instrument, and that the AC plug is securely inserted to the AC outlet
(page 12).

A click or pop is heard when
the power is turned on or off.

This is normal when electrical current is being applied to the instrument.

Noise is heard from the
speakers or headphones.

The noise may be due to interference caused by the use of a mobile phone in close
proximity to this instrument. Turn off the mobile phone, or move it further away from this
instrument.

Noise is heard from the
instrument’s speakers or
headphones when using the
instrument with the application
on iPhone/iPad.

When you use the instrument along with the application on your iPhone/iPad, we recommend
that you set “Airplane Mode” to “ON” on your iPhone/iPad in order to avoid noise caused by
communication. While Bluetooth is connected, setting “Airplane Mode” to “ON” disconnects
Bluetooth; however, the connection can be restored by reconnecting again.

The overall volume is low, or no
sound is heard.

The Master Volume is set too low. Set it to an appropriate level using the [MASTER VOLUME]
knob (page 12).
Make sure a pair of headphones or conversion adaptor is not connected to the [PHONES]
jack (page 13).

Pedals do not function.

The pedal cord may not be securely connected to the [TO PEDAL] jack. Be sure to insert the
pedal cord all the way until the metal part of the cord plug disappears from view (page 23).

The damper pedal does not
function as expected.

The damper pedal was pressed when the power was turned on. This is not a malfunction;
release the pedal and press it again to reset the function.

YDP-103 Owner’s Manual

21

Keyboard Stand Assembly
CAUTION
• Be careful not to confuse parts, and be sure to install all
parts in the correct orientation. Please assemble the unit in
accordance with the sequence given below.
• Assembly should be carried out by at least two persons.
• Assemble the unit on a hard and flat floor with ample space.
• Be sure to use the included screws only, and insert screws
of the correct size in the correct hole locations. Use of
incorrect screws can cause damage or malfunction of the
product.
• Be sure to tighten all screws upon completing assembly of
the unit.
• To disassemble, reverse the assembly sequence given
below.

1.

After untying the bundled pedal
cord on C, attach C to D and E and
fasten the screws (1-3).

E

1-2

Have a Phillips-head (+) screwdriver of the appropriate size
ready.

D
C

Remove all parts from the package and make sure you
have all of the items.

A

Cord holder

D

1-3

1-1

Untie and straighten out the bundled pedal
cord.
Untie the two vinyl strings.

E

B

1-1

C
C
Bundled pedal cord inside

AC adaptor

* The adaptor may not be included, or may look different from the
illustration above, depending on your particular area. Please
check with your Yamaha dealer.

2.

Screws set
1 6 x 20 mm
long screws x 4

2 6 x 16 mm
short screws x 4

1-2
1-3

thin screws x 2

4 4 x 20 mm

2-1
2-2
2-3
2-4

22

YDP-103 Owner’s Manual

Attach D and E to C by finger-tightening
the long screws 1 (6 x 20 mm).

Attach B.
Depending on the model of digital piano you
purchased, the surface color of one side of B may
be different from the other side. In this case,
position B so that the side of the surface color
similar to D and E faces the player.

3 4 x 12 mm

tapping screws x 4

Align D and E with each end of C.

Place the lower side of B on each foot of D
and E, then attach the upper side to D and E.
Attach the top of B to D and E by fingertightening the thin screws 3 (4 x 12 mm).
While pressing on the lower part of D and E
from the outside, secure the bottom ends of
B using two tapping screws 4 (4 x 20 mm).
Insert the other two tapping screws 4 (4 x
20 mm) into the other two screw holes to
secure B.

Keyboard Stand Assembly

2-5

Securely tighten the screws on the top of B
that were attached in Step 2-2.

2-2, 2-5

CAUTION
• Fingers can become pinched between the main unit and the
rear or side panels, be extra careful so as not to drop the
main unit.
• Do not hold the keyboard in any position other than the
position shown in the illustration.

E

5.
5-1

B

2-3

D

5-2

2-1
Place the
bottom ends
of the rear
panel on
each foot.

3.

2-4

Secure A.
Adjust the position of A so that the left and
right ends of A will project beyond D and E
equally when seen from the front.
Secure A by tightening the short screws 2
(6 x 16 mm) from the front.

5-1
2-3
Projection of A

Secure C.
Securely tighten the screws on C that were
attached in Step 1-3.

D
B

E

C

5-2

3

4.

6.

Mount A.
Be sure to place your hands at least 10 cm from
either end of A when positioning it.

6-1
6-2

Connect the pedal cord and the AC
adaptor.
Insert the pedal cord plug to the
[TO PEDAL] jack from the rear.
Securely wind the cord holder around the
pedal cord.
The cord holder is attached to D.

A

6-3

At least
10 cm

Insert the AC adaptor plug into the DC IN
jack from the rear.

E
At least
10 cm

B

D

YDP-103 Owner’s Manual

23

Keyboard Stand Assembly

6-2

6-1

After completing the assembly, please check the
following.
• Are there any parts left over?

 Review the assembly procedure and correct any errors.

• Is this instrument clear of doors and other
movable fixtures?

 Move the instrument to an appropriate location.

• Does this instrument make a rattling noise when
you shake it?
 Tighten all screws.

• Does the pedal box rattle or give way when you
step on the pedals?
 Turn the adjuster so that it is set firmly against the
floor.

6-3

D

• Are the pedal cord plug and the adaptor plug
inserted securely into the sockets?
 Check the connection.

When moving the instrument
CAUTION

B

When moving the instrument after assembly, always hold
the bottom of the main unit. Do not hold the key cover or
top portion. Improper handling can result in damage to
the instrument or personal injury.

NOTICE
Rotate the adjuster under the pedal until it separates from
the floor surface. Contact with the adjuster can result in
damage to the floor surface.
Do not hold here.
Top portion

Insert the pedal cord securely until the metal part of the
cord plug disappears from view. Otherwise, the pedal may
not function properly.
Key cover

Hold here.

7.

Set the adjuster.

Separate the adjuster
from the floor surface.

Transporting

Rotate the adjuster until it comes in firm contact
with the floor surface.

If you move to another location, you can transport the
instrument along with other belongings. You can move the
unit as it is (assembled), or you can disassemble the unit
down to the condition it was in when you first took it out of
the box. Transport the keyboard horizontally. Do not lean it
up against a wall or stand it up on its side. Do not subject
the instrument to excessive vibration or shock. When
transporting the assembled instrument, make sure all
screws are properly tightened and have not been loosened
by moving the instrument.
CAUTION
If the main unit creaks or is otherwise unsteady when you
play on the keyboard, refer to the assembly diagrams and
retighten all screws.

24

YDP-103 Owner’s Manual

Specifications
Width
Size/Weight

1,357 mm (53-7/16")

Height
(With music rest raised)

815 mm (32-1/16")
(969 mm (38-1/8"))

Depth

422 mm (16-5/8")

Weight

37.5 kg (82 lbs., 11 oz.)
Number of Keys

Keyboard

88

Type

GHS with Matte Black Keytops

Touch Response
Control Interface
Pedal

Cabinet

Voices

Effects
Playback

Hard/Medium/Soft/Fixed

Number of Pedals

3

Half Pedal

Yes (Damper)

Functions

Damper, Sostenuto, Soft

Panel Language

English

Key Cover Style

Sliding

Music Rest

Yes

Tone Generation

Piano Sound

Polyphony

Number of Polyphony (Max.)

64

Preset

Number of Voices

10

Types

Reverb

Functions
Preset

AWM Stereo Sampling

4 types

Dual

Yes

Duo

Yes

Number of Preset Songs

10 Voice Demo Songs +10 Piano Preset Songs

Metronome
Functions

Overall Controls

Yes

Tempo

32 – 280

Transpose

-6 – 0 – +6

Tuning

414.8 – 440.0 – 466.8 Hz

DC IN
Connectivity

Connections

Yes

Headphones

Standard stereo phone jack (x 2)

USB TO HOST
Sound System

Yes

Amplifiers

6Wx2

Speakers

Oval (12 cm x 6 cm) x 2

Adaptor
Power Supply

PA-150 or an equivalent recommended by Yamaha
6W
(When using PA-150 AC adaptor)

Power Consumption
Auto Power Off

Included Accessories

Separately Sold Accessories
(May not be available depending on your locale.)

Yes
•
•
•
•
•

Owner’s Manual
Quick Operation Guide
Bench (included or optional depending on locale)
Online Member Product Registration
AC adaptor: PA-150 or an equivalent (included or optional depending
on locale)

• HPH-150/100/50 headphones
• AC adaptor: PA-150 or an equivalent recommended by Yamaha
• UD-BT01 Wireless MIDI adaptor

* The contents of this manual apply to the latest specifications as of the publishing date. Since Yamaha makes continuous improvements to the product, this
manual may not apply to the specifications of your particular product. To obtain the latest manual, access the Yamaha website then download the manual file.
Since specifications, equipment or separately sold accessories may not be the same in every locale, please check with your Yamaha dealer.

YDP-103 Owner’s Manual

25

Index
A

P

AC adaptor .................................................................9
Accessories ..................................................................9
Adjusting the Tempo ....................................... 18, 19
Auto Power Off ........................................................13

Panel Controls and Terminals .............................. 10
Pedals ........................................................................ 17
Piano Songs .............................................................. 18
Power ........................................................................ 12
Power indicator ....................................................... 12
Preset Song List ....................................................... 18
Preset Songs ............................................................. 18

C
Computer-related Operations .................................9
Connecting an iPad or iPhone ...............................20
Connecting to a computer ......................................20

D
Damper Pedal ...........................................................17
Data Backup .............................................................21
Demo Song List ........................................................18
Digital Piano Controller ...........................................9
Dual ...........................................................................14
Duo ............................................................................15

Quick Operation Guide ............................................ 9

R
Reverb ....................................................................... 15
Reverb Type List ...................................................... 15

S

H

Selecting a Beat ........................................................ 19
Soft Pedal .................................................................. 17
Sostenuto Pedal ....................................................... 17

Half-pedal .................................................................17
Headphones ..............................................................13

T

I

Touch Sensitivity ..................................................... 16
Transposing ............................................................. 16
Tuning ...................................................................... 16

Initializing .................................................................21
iPhone/iPad Connection Manual ............................9

K
Key Cover .................................................................11

M
Manuals .......................................................................9
Metronome ...............................................................19
MIDI Basics ................................................................9
MIDI Reference .........................................................9
MIDI Settings ...........................................................20
Music Rest ................................................................11

O
Online Manuals (PDF) .............................................9
Operation Confirmation Sounds ..........................13

26

Q

YDP-103 Owner’s Manual

U
USB TO HOST ........................................................ 10

V
Voice ......................................................................... 14
Voice Demo Songs .................................................. 18
Voice List .................................................................. 14
Volume ..................................................................... 12

MEMO

YDP-103 Owner’s Manual

27

Yamaha Global Site
http://www.yamaha.com/
Yamaha Downloads
http://download.yamaha.com/
ZS66930

Manual Development Department
© 2016 Yamaha Corporation
Published 03/2016 MWZC*.*-**C0
Printed in Indonesia

ZS66930



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Author                          : Manual Development Group, Yamaha Corporation
Create Date                     : 2016:03:03 16:51:33Z
Keywords                        : Single, language, version
Modify Date                     : 2016:04:14 09:40:36+09:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Creator Tool                    : FrameMaker 9.0
Metadata Date                   : 2016:04:14 09:40:36+09:00
Format                          : application/pdf
Title                           : YDP-103 Owner’s Manual
Creator                         : Manual Development Group, Yamaha Corporation
Document ID                     : uuid:ac9a0b2f-0168-4d26-b647-3ba5d0f0092c
Instance ID                     : uuid:7a93df20-20f9-455d-9878-d2bf27a673a1
Page Mode                       : UseOutlines
Page Count                      : 28
EXIF Metadata provided by EXIF.tools

Navigation menu