Yi Technology YAS2217 YI Discovery Action Camera User Manual 1
Shanghai Xiaoyi Technology Co., Ltd. YI Discovery Action Camera 1
User manual
2017-12-11
V1.1
说明书(英文版)
J22 YI Discovery Action Camera
90×90mm
2. Getting to know the camera
YI Discovery Action Camera×1
1. Camera kit
MicroUSB Cable×1
Thank you for choosing YI Discovery Action Camera Battery×2
Manual×1
Battery Indicator
Lens
LCD Screen
Speaker
Camera Status Indicator
Power/Shutter Button
Microphone
Battery Cover
MicroUSB Port
MicroSD Card Solt
J22
609
3. Insert/remove MicroSD Card (Sold Separately)
Slide card into the card slot with the label facing the front of the battery. The card will click into place
when fully inserted.
1) To insert microSD card:
2) To remove microSD card:
Press finger against edge of card and lightly push into camera. The card will pop up to be removed.
正面：
背面：
Return Firmware
J22V21LXXXXXXX1234567
Current Version： 1.X.X
What is NEW:
Version： 1.X.X
Add a live feature
Optimize the UI interaction experience
Optimize SD card stability
Download
7. Key Accessories
Bicycle Stand
Tip: Find out more about the accessories at www.yitechnology.com.
Waterproof Case
Helmet Mount
6. How to Use the Camera
Long press the Power/Shutter Button. The screen will turn off, followed by a sound
Press the Power/Shutter Button. The screen will turn on, followed by a sound
1) Powering ON and OFF:
indication.
indication.
To power on:
To power off:
2) Connecting to the Yi Action Camera APP
Tip: After pairing you can use the app to control, download and playback your videos or
photos.
Scan the following QR code to download YI Action Camera App and install to your smartphone or tablet.
Or, you can find the App in the App Store or Google Play by searching for 'Yi Action'. After opening the
Yi Action Camera APP, you will see the connection interface as shown in the picture below. View the
tutorial to connect the app to the YI Discovery Action Camera.
3) Updating Firmware
After you connect your camera to the Yi Action Camera APP for the first time, the app will automatically
download the latest firmware and guide you to update the camera's firmware to the latest version.
To update from the app, make sure the camera is connected to a power source or has more than 50%
battery remaining.
US V1.0
Thank you for choosing YI Discovery Action Camera. Please read this manual carefully and save
it for future needs.
7. Customer support
"Xiaoyi" and "YI" logo are trademarks of Shanghai Xiaoyi Technology Co.,Ltd.
WARNING: No naked flame sources - such as candles - should be placed on the
product.
Manufacturer/Factory:Shanghai Xiaoyi Technology Co., Ltd.
Address of Manufacturer/Factory:6F,Building E,No.2889,Jinke Road,Shanghai,China
Importer: XXXXX
Address of Importer: XXXXX
Attention: It is illegal in many jurisdictions to record audio and/or video without the consent of all
individuals. You must comply with all laws when using your YI Discovery Action Camera.
3. DO NOT use near any heat sources such as radiators, heaters, stoves, or other apparatus
5. For the best results please check our site regularly for the latest version of the app
IMPORTANT SAFETY GUIDELINES
1. READ this user manual carefully.
2. CLEA N O NLY with a dry cloth.
(including amplifiers) that produce heat.
4. ONLY USE attachments/accessories specified by the manufacturer.
and firmware.
Please visit www.yitechnology.com/support or email support@yitechnology.com
Find us on social networks:
www.facebook.com/YITechnologyOfficial
www.youtube.com/YIcamera
www.google.com/+YIcamera
Instagram: yitechnology
YI 4K Action Camera
YI Lite Action Camera
Select Device
?
YI 4K+ Action Camera
YI Discovery Action
Camera
4. Battery Insertion and Removal
Use the tab to pull the battery from the slot.
2) To remove the battery:
1) To insert the battery:
1. Insert the battery into the battery slot, following the direction of the arrow.
2. To close the battery cover, press and slide the cover in the opposite direction of the printed arrow. Make
sure to press firmly to ensure proper closure.
5. Battery Charging
1. Connect the camera to a power source or computer via the MicroUSB cable.
If using a computer to charge, make sure the camera is powered off.
2. The red status light remains ON while the battery is charging.
3. The red status light will turn OFF when the battery is fully charged.
This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users,the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'é
metteur par Industrie Canada. Dans le but de réduire les
risques de brouillage radioélectriqueà
l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Le remplacement incorrect de la batterie est susceptible d'entraner un risque d'explosion.
Veuillez jeter les batteries usagées selon les instructions.
FCC ID: 2AFIB-YAS2217
Mount
Power/Shutter Button
Housing frame case
To open the battery cover, pull from the slot following the arrow direction.
Here by, We Shanghai Xiaoyi Technology Co., Ltd. declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive 2014/53/EU
This product can be used across EU member states
WIFI
Operation Frequency 802.11b/802.11g/802.11n(HT20): 2412MHz~2462MHz
802.11n(HT40):2422MHz~2452MHz
Battery (Rechargeable Li-ion Battery)
Model
Capacity
Nominal Voltage
Watt-hour
Manufacturer
Pg900
900mAh
3.7V
3.33Wh
Shenzhen Shunxiang Electronic Technology Co., Ltd
F/7,Building E, Huafeng Industrial Park, Hangcheng
Avenue, Gushu, Xixiang Town, Banan District,
Shenzhen City, Guangdong, China
Address of Manufacturer