Yinrun Industry 10031-32-T27M MINI-MONSTER SPINNING CAR User Manual Full page fax print

Download:
Mirror Download [FCC.gov]
Document ID	1762834
Application ID	SmJjU6Cp/oUT0/Lwtsym7g==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	170.76kB (2134484 bits)
Date Submitted	2012-08-09 00:00:00
Date Available	2012-08-09 00:00:00
Creation Date	2012-08-08 19:09:59
Producing Software	GPL Ghostscript 8.64
Document Lastmod	2012-08-08 19:10:00
Document Title	Full page fax print
Document Creator	PScript5.dll Version 5.2
Document Author:	Millie_LiWM

Flip and Rip
RC Stunt Vehicle
User Guide
SAVE THESE INSTRUCTIONS.
READ COMPLETE INSTRUCTIONS BEFORE USE.
#XC9946 © 2012 EB Brands
X09946I501 EXC.Indd 1 XC9946ISO1EXC 6/26/12 4:33 PM
5 x 7 6/20/I 2
Congratulations on your new EXRC purchase! EXRC dragsters dominate the road
with superior speed and control. Now that you’re an honorary EXRC dragster, we
recommend reading through this manual thoroughly before attempting your first
race. Inside this manual, you will find driving control tips, safety precau-
tions and care instructions
to keep your EXRC vehicle in
tip-top shape. Follow the
instructions, and use your EXRC
vehicle to feed your need for
speed and race toward the
checkered flags! Ladies and
gentlemen, start your
Antenna
Back Wheel
engines! Battery
Compartment
VEHICLE LAYOUT behind car
Chassrs
CONTROLLER LAYOUT Rear Wheel
Front Wheel
Transmitter
Antenna
Power
Indicator
Steering
Knob
X09946|SO1EXCJndd 2 6/26/12 4:33 PM
BATTERY INSTALLATION
Operation requires 4"AA: batteries for car and one
9V battery for remote control. Battery
Compartment
Cover
Remote
1.Carefu|ly remove remote control from package Bauer)!
- - - - - Com artment
2. Usmg a Phillips-head screwdriver, remove the p
screw from the battery
compartment cover and insert 9V battery. Be
sure to follow the battery polarity (+ and -)
drawing on the product.
3. Replace the battery compartment cover
and secure with the screw.
Vehicle On /0 ff
1 . Carefully remove vehicle from package.
2. Locate the battery compartment on
the back of each item.
3. Swivel latches on bottom of car to
release the battery pack and insert
4 AA batteries. Be sure to follow the
battery polarity (+ and -) drawing on
the product.
4. Slip battery compartment back into the
vehicle and secure latches.
5.Turn the ON/OFF switch located on the
bottom of the vehicle to ON position.
If batteries have been installed properly,
the LED lights within the vehicle will turn
on when you switch the vehicle to the
ON position.
XC9946|SO1EXCJndd 3 6/26/12 4:33 PM
J L
MOVE FORWARD MOVE BACKWARD REVERSE RIGHT REVERSE LEFT SPIN 4 WHEELS WHEELIE SPIN
- r
'0 ©
HOW TO DRIVE
1.To move forward: Press both joy sticks forward at the same time.
2.To move backward: Press both joy sticks backward at the same time.
3.To do reverse right turn: Press Rightjoystick forward
4.To do reverse left turn: Press Leftjoystick forward
5.To spin on all 4 wheels: Press the Left and the Rightjoystick in
opposite directions.
6.To wheelie spin: Press Right or Leftjoystick backward.
CARE AND HANDLING
-To avoid damage to the vehicle, never drive it on a wet surface, sand, mud,
or snow.
. Do not expose the vehicle to extreme temperatures, or operate during
thunderstorms or rain.
. Don not submerge car or controller in water.
- Never operate your car on the street, highway or in confined or crowded areas;
do not use people or animals as obstacles. Avoid operating near small children.
- Do not run the car into furniture, objects or hard surfaces, doing so will damage
the car.
. Keep fingers, hair and loose clothing away from the tires, gears and motor while
car is on.
- Do not leave car or transmitter outside near sources of heat or under direct
sunlight for long periods oftime; or outside overnight as dampness harms
interior components.
- Remove all batteries when not in use to avoid accidental operation.
. Adult supervision is recommended when using this car.
-To clean vehicle, use a damp cloth then wipe dry. Do not use chemical cleaners.
- Long periods of playtime can generate a high heat level, which causes wear and
tear. To extend product life, allow 10 minutes to cool down before installing new
batteries.
X0994GISO1EXCJndd 4 6/26/12 4:33 PM
“CAUTION — Battery Safety Information
- Non—rechargeable batteries are not to be recharged
- Rechargeable batteries must be removed before recharging
- Rechargeable batteries should only be recharged under adult supervision
- Do not mix alkaline, standard (carbon»zinc), or rechargeable batteries
- Exhausted batteries are to be removed
- Do not mix old and new batteries
- Do not dispose of product in h re; batteries may explode or leak
- If this product will not be used for an extended period, remove batteries
from the product
- The supply terminals are not to be short—circuited
- Batteries are to be inserted with correct polarity
- Clean the battery contacts and also those of the product prior to battery
installation
- As always, dispose of batteries in an eco—friendly manner
Caution: The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—lncrease the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
X09946|SOTEXCJndd 5 6/26/12 4:33 PM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 5
Create Date                     : 2012:08:08 19:09:59+08:00
Title                           : Full page fax print
Producer                        : GPL Ghostscript 8.64
Author                          : Millie_LiWM
Creator                         : PScript5.dll Version 5.2
Modify Date                     : 2012:08:08 19:10:00+08:00

EXIF Metadata provided by EXIF.tools