Yinrun Industry 100851610 RUNNER TUMBLING CAR User Manual 10085 IMx

Download:
Mirror Download [FCC.gov]
Document ID	3193617
Application ID	azloWII2DMmkhhEGb6Jv1w==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22kB (275015 bits)
Date Submitted	2016-11-11 00:00:00
Date Available	2016-11-11 00:00:00
Creation Date	2016-11-02 18:07:37
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2016-11-02 18:07:37
Document Title	Microsoft Word - 10085 IM.docx
Document Creator	PScript5.dll Version 5.2
Document Author:	vincent

2.4G Remote Control runner tumbler car
ATTENTION PARENTS:
It is recommended that this toy and all accessories be periodically examined for potential
hazards and that any potentially hazardous parts be repaired or replaced.
The use of the product may be disrupted by electromagnetic interference. If this is the case,
switch the device off and on again following the instructions in the user manual. If the
functions are not reset, move to another location.
During use, the internal power in the electric circuit can get quite high (for example during a
360 spin). In such a case safety circuit will shut down the vehicle for approximatively 1
minute. During this period the vehicle will not respond to signals from the transmitter. This
is not a defect but a safety measure to protect the electronic circuits. After this period, the
vehicle will resume normal operation.
INSTALLING BATTERY IN THE TRANSMITTER
The operation requires 1 × 9V/6LR61 battery for the transmitter.
Unscrew the battery compartment cover on the transmitter.
Insert the 9V battery following the correct polarities. (+ / ‐).
Screw the battery compartment cover.
BATTERY AND CHARGING INSTRUCTION
The operation requires 8 X AA 1.5V Alkaline battery
Fully remove the item from package
z
Unscrew the battery compartment cover on the vehicle and insert batteries noting the
correct polarity (+/‐).
Re‐screw the battery compartment cover
BATTERY WARNING
Insert batteries using the correct polarity
Do not short‐circuit the supply terminal
Remove batteries when not in use
Recycle or dispose of exhausted batteries according to federal
Do not dispose of batteries in a fire they make leak or explode
Only use manufacture specified batteries, charger and /or adapter
Always use, replace and recharge (if applicable) batteries under adult supervision
Non‐rechargeable batteries are not to be recharged
SAFETY PRECAUTIONS:
Do not operate during thunderstorms or rain
Avoid water, sand and snow when operating your vehicle
z
Do not submerge vehicle or controller in water
Never operate your vehicle on the street or highway
Adult supervision is recommended when operating this vehicle
Remove all batteries when not in use to avoid accident operation.
Never operate your vehicle in a confined or crowed area and do not use people or
animals as obstacles.
Do not run your vehicle into furniture, objects or hard surfaces, as this will cause
damage to both the objects and the vehicle.
Keep fingers, hair and loose clothing away from the tires, gears and motor while the
vehicle is switched to “ON”.
Do not leave vehicle or transmitter near sources of heat or under direct sunlight for
long periods of time.
Do not leave vehicle or transmitter outside overnight.
Dampness is harmful to interior components.
FCC RULES
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Warning: changes or modification to this until not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and radiates radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by returning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
KEEP THIS PACKAGE FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION.
PERFORMING STUNTS
Push both joystick forward: Forward
Pull both joystick backward: Reverse
Push both joysticks forward and simultaneously push the flip button: Forward 360 Flip
Pull both joystick backward and push the flip button : Backward 360 Flip
Direct both joysticks in opposite directions :Spin (clockwise/anticlockwise )

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2016:11:02 18:07:37+08:00
Create Date                     : 2016:11:02 18:07:37+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 10085 IM.docx
Creator                         : vincent
Document ID                     : uuid:ddee8569-e447-42de-ba4b-4619784eae6c
Instance ID                     : uuid:ce203f34-dbc9-440e-8daa-429dd57792b0
Page Count                      : 5
Author                          : vincent

EXIF Metadata provided by EXIF.tools