York Millennium 28971Ar Users Manual Form 201.18 EG1 (200), Air Cooled Screw Liquid Chillers (Style F), Engineering Guide
28971AR to the manual 02b2421d-3813-42db-aeef-ca011a822d37
2015-02-02
: York Millennium-28971Ar-Users-Manual york-millennium-28971ar-users-manual-455382 york pdf
Open the PDF directly: View PDF .
Page Count: 104
Download | |
Open PDF In Browser | View PDF |
FORM 201.18-EG1 (200) Millennium ® Air Cooled Screw Liquid Chillers (STYLE F) 28971AR CH ES PLY IL CK AG WAT E R ING WITH U S I NG R TI R E S SI O N CY CL E F ® MP NS O • 0 MA ER C A PA THE VAPOR APOR O C • LI IED TO ARI AS NG OM NUFACTUR ER T IF ER C C I S FICATION SECTIO /5 9 0 TA N DARD 55 50 - 200 TONS 80 - 420 TONS (310 - 1460 kW) 60 Hz 200, 230, 380, 460, & 575 Models TABLE OF CONTENTS Introduction .......................................................................................................... 3 Specifications ....................................................................................................... 4 Accessories and Options .................................................................................... 7 Temperatures and Flows ....................................................................................10 Water Pressure Drop ..........................................................................................12 Ratings ...............................................................................................................14 Physical Data ......................................................................................................36 Dimensions .........................................................................................................40 Operating Weights – Aluminum Fin Coils ...........................................................72 Isolator Selection – Aluminum Fin Coils ..............................................................73 Operating Weights – Copper Fin Coils ................................................................74 Isolator Selection – Copper Fin Coils ..................................................................75 Isolator Details ....................................................................................................76 Electrical Data .....................................................................................................78 Electrical Notes ...................................................................................................88 Power Connection Options .................................................................................90 Typical Control Wiring – 2-Compressor Units .....................................................94 Application Data ..................................................................................................96 Guide Specifications ...........................................................................................97 NOMENCLATURE The Model Number denotes the following characteristics of the unit: YC A S 0140 E C 17 Y F YORK Chiller YC = YORK Chiller Type Start Y = Star (WYE)-Delta X = Across-the-Line Air-Cooled Compressor Type S = Screw Nominal Capacity (tons) Unit Designator S = Standard Unit E = High Efficiency H = High Static Fans 2 Design Series Voltage Code 17 = 200-3-60 28 = 230-3-60 40 = 380-3-60 46 = 460-3-60 58 = 575-3-60 Refrigerant C = R-22 YORK INTERNATIONAL FORM 201.18-EG1 Introduction YORK Millennium® Air Cooled Screw Liquid Chillers 28971AR YORK Millennium Air Cooled Screw Compressor machines are the state-of-the-art in air-cooled chillers, providing chilled fluids for all air conditioning applications. Completely self-contained and designed for outdoor installation, these chillers employ new, low noise, energy efficient, serviceable, semi-hermetic screw compressors designed and manufactured specifically for this new product line. These compressors, with reliable twin-screw technology, are ideally matched to evaporators and condensers optimally configured for superior heat transfer and unit efficiency. Condenser coils are arranged to maximize airflow using full airfoil, high efficiency, low noise fans driven by low energy motors. The screw compressors, high efficiency evaporator, enhanced heat transfer condensers, and weather tight power and microprocessor control centers are mounted on a bolted, fully galvanized and powder painted, all steel base, for unsurpassed reliability and performance. YORK INTERNATIONAL 3 Specifications These YORK air cooled chillers are shipped as a complete factory package. Each unit is completely assembled with all interconnecting refrigerant piping and internal wiring, ready for field installation: COMPLETE FACTORY PACKAGE • Each compressor is installed on its own independent refrigerant circuit, which is factory pressure tested, evacuated, then fully charged with refrigerant and oil. • After assembly, an operational test is performed with water flowing through the cooler to ensure each circuit operates correctly. • Cabinet and base frame are constructed of formed heavy gauge, galvanized steel. • All external structural parts are covered with architecturally neutral “Desert Sand” (Munsell #10YR62) baked-on enamel powder paint. This provides a finish which, when subjected to ASTM B117, 500 hour, 5% salt spray conditions, shows breakdown of less than 1/8" either side of a scribed line (equivalent to ASTM D1654 rating of “6”). • Design is in accordance with applicable sections of ASME Pressure Vessel Code, NFPA 70 (National Electrical Code), U.L. and cU.L. Standards , and ASHRAE/ANSI-15 Safety Code for Mechanical Refrigeration. • Units are Rated and Certified in accordance with ARI Standard 550/590-98. • All exposed power wiring routed through liquid-tight, non-metallic conduit. SEMI-HERMETIC YORK SCREW COMPRESSORS • An ideal synergy of expertise, sister division YORK Refrigeration Compressor Engineers as integral members on YORK Engineered Systems’ Chiller Design Team, has resulted in a world class compressor with unequaled performance. • Continuous function, microprocessor controlled, 3way proportional Capacity Control Valve provides regulated output pressure independent of valve input pressure for a stable, smooth, and precise match of compressor capacity to cooling load to 10% of chiller capacity. • Automatic spring return of capacity control valve to minimum load position ensures compressor starting at minimum motor load. Internal discharge check to prevent rotor backspin upon shut-down. • Acoustically tuned, internal discharge gas muffler eliminates objectionable noise at the source, while optimizing flow for maximum performance. 4 • Reliable suction gas cooled, high efficiency, accessible hermetic motor with APT2000 type magnet wire and redundant overload protection using both thermistor and current overload protection. • Suction gas screen and serviceable, 0.5 micron full flow oil filter within the compressor housing. • Some models equipped with tuned port economizer as appropriate for enhanced capacity and superior efficiency. • Cast iron compressor housing precisely machined for optimal clearances and superb efficiency. Entire compressor, from suction to discharge has a Design Working Pressure of 450 PSIG (31 bar). • 350W compressor body cartridge heater. CONDENSER SECTION • Condenser Fans with low noise, full airfoil cross section for maximum efficiency, statically and dynamically balanced for low vibration operation, and positioned in extended, formed steel orifices for low sound and maximum efficiency. • Condenser fan motors are high efficiency, direct drive, 6-pole, 3-phase, Class-“F”, current overload protected, totally enclosed (TEAO) type with double sealed, permanently lubricated, ball bearings. • Fin and tube condenser coils of seamless, internally enhanced, high condensing coefficient, corrosion resistant copper tubes arranged in staggered rows and mechanically bonded to corrosion resistant aluminum alloy fins with full height fin collars. Design working pressure is 450 PSIG (31 bar). EVAPORATOR • High efficiency, direct-expansion type cooler with refrigerant in tubes and chilled liquid through the baffled shell. Independent circuits provided for each compressor. • Design working pressure of the shell waterside is 150 PSIG (10.3 bar), and 350 PSIG (24 bar) for the refrigerant side. Constructed and tested in accordance with applicable sections of ASME Pressure Vessel Code, Section VIII, Division (1). Water side exempt per paragraph U-1, (c), (6). Other codes, such as German TÜV, also available for global customers. • Water baffles fabricated from galvanized steel to resist corrosion. Removable heads allow access to internally-enhanced, seamless, copper tubes. Water vent and drain connections included. • Cooler equipped with thermostatically controlled heater for protection to -20°F (-29°C) ambient, and insulated with ¾" (19mm) flexible, closed-cell foam (k = 0.25). YORK INTERNATIONAL FORM 201.18-EG1 REFRIGERANT CIRCUIT • Independent refrigerant circuits per compressor, each using copper refrigerant pipe formed on computer controlled bending machines. This eliminates over 60% of system piping brazed joints as compared to designs that use fittings, resulting in a highly reliable and leak resistant system. • Liquid line components include: manual shut-off valve with charging port, high adsorption removable core filter-drier, solenoid valve, sight glass with moisture-indicator, and reliable thermostatic expansion valves. • Economizer is a refrigerant to refrigerant, compact plate-type heat exchanger to maximize chiller capacity and efficiency by subcooling liquid refrigerant delivered to the cooler expansion valve. Constructed of corrosion resistant stainless steel plates formed to induce turbulent flow and enhance heat transfer, then oven brazed and pressure tested for reliability. Designed and constructed in accordance with ASME and TÜV for 450 PSIG (31 bar). U.L./CSA listed. • Suction and discharge lines provided with manual compressor shutoff service valves. Suction line equipped with closed-cell insulation. • Oil separators with Design Working Pressure of 450 PSIG (31 bar) and U.L. listing are high efficiency, augmented aerosol impingement type to maximize oil extraction without fragile media to break down.An oil charging valve is included with each refrigerant circuit. • Oil cooling provided by dedicated air cooled finned tube type heat exchanger located in the condenser section of the machine. MICROPROCESSOR CONTROLS • Controls housed in a powder painted steel cabinet enclosure, equivalent to NEMA 3R/12 (IP55), with hinged, latched, and gasket sealed, door. • Liquid crystal 40 character display with text provided on two lines and light emitting diode backlighting for outdoor viewing. • Color coded, 32 button, sealed keypad with sections for Display, Entry, Setpoints, Clock, Print, Program and Unit On/Off. • Standard controls include: brine chilling or thermal storage, automatic pump down, run signal contacts, demand load limit from external building automation system input, remote liquid temperature reset input, unit alarm contacts, evaporator pump control, automatic reset after power failure, automatic system optimization to match operating conditions, software stored in non-volatile memory (EPROM) to eliminate chiller failure due to AC power failure. Programmed setpoints retained in lithium battery YORK INTERNATIONAL backed RTC memory for a minimum 5 years. • Display – In English (°F and PSIG) or Metric (°C and Bars) units, and for each circuit: ♦ Return and leaving chilled liquid, and ambient temperature. ♦ Day, date and time. Daily start/stop times. Holiday and Manual Override status. ♦ Compressor operating hours and starts. Automatic or manual lead/lag. Lead compressor identification. ♦ Run permissive status. No cooling load condition. Compressor run status. ♦ Anti-recycle timer and anti-coincident start timer status per compressor. ♦ Suction (and suction superheat), discharge, and oil pressures and temperatures per System. ♦ Percent full load compressor motor current per phase and average per phase. Compressor capacity control valve input steps. ♦ Cutout status and set-points for: supply fluid temperature, low suction pressure, high discharge pressure and temperature, high oil temperature, low and high ambient, phase rotation safety, and low leaving liquid temperature. ♦ Unloading limit set-points for high discharge pressure and compressor motor current. ♦ Liquid pull-down rate sensitivity (0.5°F to 5°F/ minute in 0.1°F increments). ♦ Status of: evaporator heater, condenser fans, load and unload timers, chilled water pump. ♦ “Out of range” message. ♦ Up to 6 fault shut down conditions. ♦ Standard Display Language is English, with Options for: French, German, Italian, and Spanish. • Entry – Enter set point changes, cancel inputs, advance day, change AM/PM. • Setpoints – Chilled liquid temperature, chilled liquid range, remote reset temperature range. • Clock – Time, daily or holiday start/stop schedule, manual override for servicing. • Print – Operating data or system fault shutdown history for last six faults, and software version. Printouts through an RS-232 port via a separate printer (by others). • Program – ♦ Low leaving liquid temperature cutout, 300 to 600 second anti-recycle timer, lag compressor start time delay, and average motor current unload point. Liquid temperature setpoint reset signal from YORK ISN or building automation system (by others) via: 5 Specifications (Continued) Pulse width modulated (PWM) input for up to 40°F (22°C) total reset as standard. Optional Building Automation System interface input card for up to 40°F (22°C) reset using a: 4 to 20 milliamp, 0 to 10 VDC input, or discrete reset input. [NOTE: The Standard MicroPanel can be directly connected to a YORK ISN Building Automation System via the standard onboard RS485 communication port. This Option also provides open system compatibility with other communications networks (BACNET™ & LONMARK™) via interface through standard onboard 485 or 232 port and an external YorkTalk Translator.] ♦ Additional functions (password protected) for programming by a qualified service technician: Cut-outs for low and high ambient, low suction pressure, high discharge pressure, high oil temperature. Refrigerant type. High discharge pressure unload setpoint. Fan control discharge pressure set point. Fan ON/OFF pressure differential. Compressor motor current percent limit. 6 ♦ The Standard unit controls permit operation down to 0°F (-18°C) outdoor ambient temperature. POWER PANEL • Power panel housed in NEMA 3R/12 (IP55) rain/ dust tight, powder painted steel cabinets with hinged, latched, and gasket sealed outer doors equipped with wind struts for safer servicing. Two motor control center cabinets are provided, with independent doors and separated by a steel barrier panel. • Current transformers sense each phase, as an input to the microprocessor, to protect compressor motors from damage due to: low input current, high input current, unbalanced current, single phasing, phase reversal, and compressor locked rotor. • Control circuit transformer provides 115V / 1Ø power to the unit control system. Includes factory primary wiring from lockable disconnect on panel door separate from the motor control centers, and secondary wiring supply to the 24V, fused Microprocessor panel transformer. • Individual fan motor contactors & external overloads per condenser fan motor. • Exposed compressor and fan motor power wiring routed through liquid tight conduit. YORK INTERNATIONAL FORM 201.18-EG1 Accessories and Options • CONTROL CIRCUIT TERMINAL STRIP – Provides power input terminals for field provided power input in lieu of factory mounted control circuit transformer. 115V, 1∅ Control Circuit Power Terminal Strip located in the Microprocessor Panel to accept a field provided control power circuit with appropriate branch circuit protection in accordance with applicable Local and National codes. Provides unit control circuit power, including supply to the 24V, fused Microprocessor panel transformer. • BUILDING AUTOMATION SYSTEM (BAS) INTERFACE – Provides means to reset the leaving chilled liquid temperature or percent full load amps (current limiting) from the BAS (Factory Mounted): ♦ Printed circuit board to accept 4 to 20 milliamp, 0 to 10 VDC, or dry contact closure input from the BAS. ♦ A YORK ISN Building Automation System can provide a Pulse Width Modulated (PWM) signal direct to the standard control panel via the standard on-board RS485 port. • PRIMARY CHILLER POWER CONNECTIONS – See Electrical Data on pages 78 through 89 for specific voltage and options availability. Separate external branch circuit protection and disconnecting means must be supplied by others in accordance with applicable Local and National codes. (Factory Mounted) â Multiple Point Supply – Standard field power wiring connection on all models is Multiple Point Power Connection to factory provided Terminal Blocks. Two field supplied electrical power circuits with appropriate branch circuit protection provide power to each of two motor control center cabinets, located adjacent to each other at one end of the chiller. Each cabinet contains starter elements for one or two compressors and their associated fan motor starters. Optional to the Terminal Blocks for field power connection are Non-Fused Disconnects with external lockable handles, or (on two compressor machines only) Circuit Breakers with external lockable handles. Also Optional (on 3 & 4 compressor machines equipped with multiple point power supply) are individual system circuit breakers per each compressor with external lockable handles. ã Single-Point Supply – Optional to the Multiple Point power connection configurations are SinglePoint Supply arrangements. A wide variety of these single-point Options are offered to satisfy most any customer connection requirement: ♦ Single-Point with Individual System Breakers –These options consist of field connection to either a unit mounted Terminal Block, or a NonYORK INTERNATIONAL Fused Disconnect Switch with external, lockable handle (in compliance with Article 440-14 of N.E.C., to isolate unit power supply for service). Factory wiring is provided from the Terminal Block or Disconnect Switch to factory supplied Individual System Circuit Breakers with external, lockable handles in each of the two compressor motor control centers. ♦ Single-Point Supply – Also optional (on two compressor machines only) are Single-Point Supply configurations for field connection of a single electrical circuit to: Terminal Block, Non-Fused Disconnect Switch with lockable external handle (in compliance with Article 440-14 of N.E.C., to isolate unit power supply for service), or Circuit Breaker with lockable external handle. Factory wiring is provided from the Terminal Block, Disconnect Switch, or Breaker directly to the starter components in each of the two compressor motor control centers. • STAR (WYE)-DELTA COMPRESSOR MOTOR STARTER – Provides smooth starting and approximately 65% reduced inrush current compared to across-the-line type start. Two compressor units equipped with any of the Single-Point Power connection options and Star-Delta starters must also be equipped with Individual System Circuit Breakers option. Three and four compressor units with Star-Delta starters must also include Individual System Circuit Breakers option. (Factory Mounted) See Electrical Data (pages 79 - 89) for availability and coordination with individual system short circuit protection. • CONDENSER COIL PROTECTION – Standard condenser coil construction materials include aluminum fins, copper tubes, and galvanized tube supports for generally good corrosion resistance. However, these materials are not adequate for all environments. The system designer can take steps to inhibit coil corrosion in harsh applications and enhance equipment life by choosing from these options based on project design parameters and related environmental factors. For additional application recommendations refer to Form 150.12-ES1. (Factory Mounted) ♦ Black Fin Condenser Coils – Condenser coils constructed using black epoxy coated aluminum fin stock for corrosion resistance comparable to copper fin coils in typical seashore locations. Either this or phenolic (below) recommended for units installed in coastal environments. ♦ Phenolic Coated Condenser Coils – Completed condenser coil assemblies are covered with a cured phenolic coating. Probably the best choice for seashore or where salt spray may hit the fins, 7 Accessories and Options (Continued) and other corrosive applications except: strong alkalies, oxidizers, and wet bromine, chlorine, and fluorine in concentrations greater than 100 ppm. nection for upright mounting in horizontal pipe. (This flow switch or equivalent must be furnished with each unit). (Field mounted) ♦ Copper Fin Condenser Coils – Coils constructed with corrosion resistant copper fins. Not recommended in areas where units may be exposed to acid rain. • VIBRATION ISOLATION ♦ Neoprene Isolation – Recommended for normal installations. Provides very good performance in most applications for the least cost. (Field mounted) ♦ 1" Spring Isolators – Level adjustable, spring and cage type isolators for mounting under the unit base rails. 1" nominal deflection may vary slightly by application. (Field mounted) ♦ 2" Seismic Spring Isolators – Restrained SpringFlex Mountings incorporate a rugged welded steel housing with vertical and horizontal limit stops. Housings designed to withstand a minimum 1.0g accelerated force in all directions to 2". Level adjustable, deflection may vary slightly by application. (Field mounted) • DX COOLER OPTIONS ♦ 300 PSIG (21 bar) Waterside Design Working Pressure – The DX Cooler Waterside is designed and constructed for 300 PSIG (21 bar) working pressure. (Factory Mounted) ♦ 1-½" Insulation – Double thickness insulation provided for enhanced efficiency. ♦ Optional Pressure Safety Code Construction – Chiller construction in accordance with Pressure Safety Codes of many countries are available. Cooler, oil separators, relief valves, safeties, or other operating devices designed or selected as required by the indicated Country. Common configurations include: USA (ASME, ASHRAE-15), Germany (TÜV), France (CODAP), Italy (ISPESL), and Poland (UDT). Some available only on 50 Hz units. Consult with your YORK representative to ensure compliance with job requirements (Factory Mounted). ♦ Flange Accessory – Consists of raised face flanges to convert grooved water nozzles to flanged cooler connections. Includes companion flanges. (Field mounted). • REMOTE DX COOLER – Includes: â Main condensing unit less cooler, refrigerant, and liquid line mechanical devices; ã Separate, insulated cooler; and ä Field Accessory Kit (per refrigerant circuit: filterdrier shell and cores, liquid line solenoid valve, sight glass with moisture indicator, and Thermostatic Expansion Valve; also entering and leaving water temperature transducers) for use in the interconnecting system piping and wiring as designed and installed by others. Field connections made at the condensing unit liquid stub (after the sub-cooler, or the economizer if the system is so equipped) and at the compressor suction stub. Condensing Unit ships with an R-22 holding charge. System erection, leak testing, refrigerant, and charging are by others. See Engineering Supplement 201.10-ES2 for additional information. Remote cooler configuration available with R-22 only. NOTE: Remote DX cooler applications are outside the scope of ARI Standard – 550/590. • FLOW SWITCH ACCESSORY – Vapor-proof SPDT, NEMA 4X switch, 150 PSIG (10.3 bar) DWP, -20°F to 250°F (-29°C to 121°C), with 1" NPT (IPS) con8 • ALTERNATIVE CHILLED FLUID APPLICATIONS Standard water chilling application range is 40°F to 55°F (4°C to 13°C) Leaving Chilled Water Temperature. To protect against nuisance safety trips below 40°F (4°C) and reduce the possibility of cooler damage due to freezing during chiller operation, the unit Micro-Processor will automatically unload the compressors at abnormally low suction temperature (pressure) conditions, prior to a safety shut down. ♦ Process Brine Option – Process or other applications requiring chilled fluid below 40°F (4°C) risk water freezing in the evaporator, which is typically overcome with antifreeze. For these applications, the chiller performance rating incorporates ‘brine’ (typically ethylene or propylene glycol solution), and the system design Leaving Chilled Fluid Temperature must be provided on the order form to ensure proper factory configuration. ♦ Thermal Storage Option – Thermal Storage requires special capabilities from a chiller, including the ability to ‘charge’ an ice storage tank, then possibly automatically reset for operation at elevated Leaving Chilled Fluid Temperatures as required by automatic building controls. The Thermal Storage Option provides Ice Storage duty Leaving Chilled Fluid setpoints to 15°F minimum (-10°C minimum) during charge cycle, with a Reset range to normal supply fluid temperature. • REMOTE CONTROL PANEL AND WALL ADAPTER – See Form 201.00-SG11 for more information. (Only one of the following options can be offered on a unit at one time: BAS, Remote Control Panel or Multi-Unit Sequence Control). (Factory mounted). YORK INTERNATIONAL FORM 201.18-EG1 • MULTI-UNIT SEQUENCING – A separate Sequencing Control Center is provided to handle sequencing control of up to eight chillers in parallel based on mixed liquid temperature (interconnecting wiring by others). See Form 150.00-SG2 for more information. (Only one of the following options can be offered on a unit at a time: BAS, Remote Control Panel or Multi-unit Sequence Control). (Factory mounted). • UNIT ENCLOSURES – ♦ Wire Panel Enclosure (Full Unit) – UV stabilized black polyvinylchloride coated, heavy gauge, welded wire mesh guards mounted on the exterior of the unit. Protects condenser coil faces and prevents unauthorized access to refrigerant components (compressors, pipes, cooler, etc.), yet provides free air flow. This can cut installation cost by eliminating the need for separate, expensive fencing. (Factory mounted) ♦ Louvered Panel Enclosure (Full Unit) – Heavy gauge louver panels, galvanized and painted just as the main unit cabinet, provide liberal free air flow area. Cover coils and around the bottom of the unit to protect condenser coils, visually screen mechanical elements, and prevent unauthorized access to refrigerant components. (Factory mounted) ♦ Louvered Panels (Condenser Coil Only) – Louvered panels are mounted over the exterior condenser coil faces on the sides of the unit to visually screen and protect coils. (Factory mounted.) YORK INTERNATIONAL ♦ Louvered (Condensers) / Wire (Mechanicals) – Louvered panels mounted over the exterior condenser coil faces, and heavy gauge welded wire mesh guards mounted around the bottom of the unit. Visually screens and protects coils, and prevents unauthorized access to refrigerant components. (Factory mounted.) • HIGH STATIC FANS – Fans and motors suitable for High External Static conditions to 0.4 inches of water (100Pa). Since these require higher power motors and therefore slightly reduce chiller efficiency, select only if the installation conditions will impose additional air flow resistance resulting from such things as field installed:ducts, filters, sound enclosures, or similar obstructions to airflow. Contact the factory for performance or electrical implications. • SOUND REDUCTION OPTIONS – One or both options may be employed by the system designer as normally generated machine noise is considered in the overall project design. See Form 201.18-ES1 for additional information. ♦ Low Speed Fans – With this option, the basic chiller is equipped with 8-pole condenser fan motors in lieu of the standard 6-pole motors, plus special fans matched to these optional slower motors to retain appropriate airflow. The net result is reduced fan generated noise with no adverse effect on the chiller capacity or efficiency performance. ♦ Compressor Sound Enclosures – Compressor acoustically treated to attenuate noise. 9 Temperatures and Flows TEMPERATURE AND FLOWS (English Units) MODEL NUMBER YCAS 0090EC 0100EC 0110EC 0120EC 0130EC 0140EC 0150EC 0160EC 0170EC 0180EC 0200EC 0210EC 0230EC 0250EC 0270EC 0300EC 0330EC 0360EC 0400EC 0440EC LEAVING WATER TEMPERATURE (°F) MIN.1 MAX.2 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 COOLER FLOW (GPM3) AIR ON CONDENSER (°F) MIN. MAX. MIN. MAX 113 122 127 134 147 170 182 188 203 218 228 248 272 225 225 255 255 300 330 330 600 600 600 600 600 600 700 747 747 747 747 747 747 800 800 800 800 1060 1060 1060 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 NOTES: 1. For leaving brine temperature below 40°F (4.4°C), contact your nearest YORK office for application requirements. 2. For leaving water temperature higher than 55°F (12.8°C), contact the nearest YORK office for application guidelines. 3. The evaporator is protected against freezing to -20°F (-28.8°C) with an electric heater as standard. 10 YORK INTERNATIONAL FORM 201.18-EG1 TEMPERATURE AND FLOWS (SI Units) MODEL NUMBER YCAS LEAVING WATER TEMPERATURE (°C) COOLER FLOW (L/S)3 AIR ON CONDENSER (°C) MIN.1 MAX.2 MIN. MAX. MIN. MAX 0090EC 0100EC 0110EC 0120EC 0130EC 0140EC 0150EC 0160EC 0170EC 0180EC 0200EC 0210EC 0230EC 0250EC 0270EC 0300EC 0330EC 0360EC 0400EC 0440EC 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 12.8 12.8 12.8 12.8 12.8 12.8 12.8 12.8 12.8 12.8 12.8 12.8 12.8 12.8 12.8 12.8 12.8 12.8 12.8 12.8 7.0 8.0 8.0 8.0 9.3 10.7 11.5 11.9 12.8 13.8 14.4 15.6 17.2 14.0 14.0 16.0 16.0 19.0 21.0 21.0 38.0 38.0 38.0 38.0 37.8 37.8 44.2 47.1 47.1 47.1 47.1 47.1 47.1 50.0 50.0 50.0 50.0 67.0 67.0 67.0 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 -17.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 51.7 NOTES: 1. For leaving brine temperature below 40°F (4.4°C), contact your nearest YORK office for application requirements. 2. For leaving water temperature higher than 55°F (12.8°C), contact the nearest YORK office for application guidelines. 3. The evaporator is protected against freezing to -20°F (-28.8°C) with an electric heater as standard. YORK INTERNATIONAL 11 Water Pressure Drop ENGLISH UNITS COOLER WATER PRESSURE DROP PRESSURE DROP (ft-H2 O) 100 10 A B C D 1 100.0 1000.0 WATER FLOW (GPM) LD04481 MODEL NUMBER YCAS 0090, 0100, 0110, 0120, 0130, 0140 0150, 0160, 0170, 0180, 0200, 0210, 0230 0250, 0270, 0300, 0330 0360, 0400, 0440 12 COOLER A B C D YORK INTERNATIONAL FORM 201.18-EG1 SI UNITS COOLER WATER PRESSURE DROP PRESSURE DROP (kPa) 1000 100 B C 10 D A 1 1 10 100 WATER FLOW (l/s) MODEL NUMBER YCAS 0090, 0100, 0110, 0120, 0130, 0140 0150, 0160, 0170, 0180, 0200, 0210, 0230 0250, 0270, 0300, 0330 0360, 0400, 0440 YORK INTERNATIONAL LD04482 COOLER A B C D 13 Ratings – English Units AIR TEMPERATURE ON CONDENSER (°F) LCWT (°F) 75 TONS kW 80 EER TONS MODEL YCAS0090EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 88.8 92.0 95.2 96.9 98.5 101.8 105.2 108.6 113.8 71.4 71.8 72.3 72.5 72.6 73.0 73.3 73.7 74.2 13.0 85.8 13.4 88.9 13.8 92.0 14.0 93.5 14.2 95.1 14.6 98.3 15.0 101.6 15.4 104.9 16.1 109.9 MODEL YCAS0100EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 91.0 94.2 97.4 99.1 100.7 104.1 107.6 111.2 116.7 73.3 73.3 73.3 73.3 73.3 73.3 73.2 73.2 73.3 13.0 13.4 13.9 14.1 14.4 14.9 15.4 15.9 16.6 88.8 91.8 94.9 96.4 98.1 101.4 104.8 108.2 113.5 MODEL YCAS0110EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 108.3 112.0 115.8 117.7 119.6 123.5 127.7 131.9 138.2 87.5 88.4 89.3 89.7 90.1 90.9 91.6 92.3 93.4 12.5 12.8 13.2 13.3 13.5 13.8 14.2 14.6 15.1 kW 85 EER TONS 90 kW EER TONS 80.6 81.2 81.7 81.9 82.2 82.7 83.2 83.7 84.5 10.9 11.2 11.5 11.7 11.9 12.2 12.5 12.9 13.4 86.7 89.7 92.7 94.2 95.8 99.0 102.2 105.6 110.7 85.0 84.9 84.9 84.9 84.8 84.7 84.7 84.7 84.7 101.8 105.3 108.9 110.7 112.5 116.2 120.1 123.9 129.9 100.3 101.3 102.3 102.8 103.2 104.1 105.0 105.9 107.2 95 kW EER TONS kW EER 80.0 82.9 85.8 87.3 88.8 91.8 94.8 97.9 102.7 85.9 86.4 87.0 87.3 87.6 88.2 88.7 89.3 90.2 9.9 10.2 10.5 10.7 10.8 11.1 11.4 11.7 12.2 77.3 80.1 83.0 84.4 85.9 88.8 91.7 94.7 99.3 91.5 92.1 92.6 92.9 93.3 94.0 94.7 95.3 96.5 9.1 9.3 9.6 9.8 9.9 10.2 10.4 10.7 11.1 10.9 11.2 11.6 11.8 12.0 12.4 12.8 13.3 13.9 85.0 87.8 90.7 92.2 93.7 96.8 100.0 103.2 108.1 91.6 91.6 91.5 91.5 91.5 91.4 91.4 91.4 91.5 10.0 10.3 10.6 10.8 11.0 11.4 11.7 12.1 12.7 83.5 86.2 89.0 90.5 91.9 94.9 97.9 101.0 105.8 98.9 98.8 98.8 98.8 98.7 98.7 98.6 98.7 98.8 9.1 9.4 9.7 9.9 10.1 10.4 10.7 11.1 11.6 10.5 10.8 11.0 11.2 11.3 11.6 11.9 12.2 12.6 99.0 102.3 105.8 107.5 109.3 112.9 116.6 120.4 126.2 107.6 108.6 109.7 110.2 110.7 111.7 112.6 113.6 115.1 9.6 9.8 10.1 10.2 10.3 10.6 10.9 11.1 11.5 96.3 99.6 102.9 104.6 106.3 109.8 113.4 117.1 122.7 (IPLV = 10.0) 75.9 76.3 76.8 77.0 77.2 77.7 78.1 78.5 79.1 11.9 12.2 12.6 12.8 13.0 13.3 13.7 14.1 14.7 82.9 85.8 88.8 90.3 91.9 95.0 98.1 101.3 106.2 (IPLV = 10.5) 78.8 78.8 78.8 78.8 78.7 78.7 78.7 78.6 78.7 11.9 12.3 12.7 12.9 13.2 13.6 14.1 14.5 15.2 (IPLV = 9.7) 104.9 93.6 11.5 108.5 94.6 11.8 112.2 95.5 12.1 114.0 95.9 12.2 115.9 96.4 12.4 119.8 97.2 12.7 123.8 98.0 13.0 127.8 98.8 13.3 133.9 100.0 13.8 115.5 8.8 116.6 9.0 117.7 9.2 118.3 9.3 118.8 9.5 119.9 9.7 120.9 9.9 122.0 10.2 123.6 10.5 NOTES: 1. 2. 3. 4. 5. 6. 14 kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panels 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590-98 Certified in accordance with the ARI Water-Chilling Packages Using the Vapor Compression Cycle Certification Program, which is based on ARI Standard 550/590. YORK INTERNATIONAL FORM 201.18-EG1 AIR TEMPERATURE ON CONDENSER (°F) LCWT (°F) 100 TONS kW 105 EER TONS kW 110 EER TONS kW 115 EER TONS kW 120 EER TONS kW 125 EER TONS kW EER MODEL YCAS0090EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 74.8 77.5 80.3 81.7 83.1 85.9 88.8 91.7 96.2 97.5 98.2 98.8 99.1 99.5 100.2 101.0 101.8 103.0 8.3 8.5 8.8 8.9 9.0 9.3 9.5 9.8 10.1 72.3 75.0 77.7 79.0 80.4 83.2 86.0 88.9 93.2 104.0 104.7 105.4 105.8 106.1 106.9 107.8 108.6 110.1 7.6 7.8 8.0 8.1 8.3 8.5 8.7 8.9 9.2 70.0 72.6 75.2 76.6 77.9 80.6 83.4 86.2 90.4 110.9 111.7 112.4 112.9 113.3 114.1 115.1 116.0 117.6 6.9 7.1 7.3 7.4 7.5 7.7 7.9 8.2 8.4 67.8 70.4 72.9 74.2 75.5 78.2 80.9 83.6 87.8 118.3 119.1 120.0 120.4 120.9 121.8 122.8 123.9 125.6 6.3 6.5 6.7 6.8 6.9 7.1 7.3 7.4 7.7 65.8 68.3 70.8 72.1 73.3 75.9 78.6 81.2 85.3 126.1 127.0 127.9 128.4 128.9 130.0 131.1 132.3 134.2 5.8 5.9 6.1 6.2 6.3 6.5 6.6 6.8 7.1 63.8 66.3 68.8 70.0 71.3 72.1 72.8 73.7 74.6 134.5 135.4 136.4 136.9 137.5 135.8 134.3 133.0 131.0 5.3 5.4 5.6 5.7 5.8 5.9 6.0 6.1 6.3 7.7 79.9 8.0 82.5 8.2 85.0 8.4 86.4 8.5 87.7 8.7 90.4 9.0 93.2 9.3 96.1 9.7 100.5 124.1 124.0 124.0 124.0 124.0 124.1 124.3 124.5 124.9 7.1 7.3 7.6 7.7 7.8 8.0 8.3 8.5 8.9 79.0 81.5 84.0 85.3 86.6 89.3 92.0 94.8 99.1 133.5 133.5 133.6 133.6 133.6 133.8 134.0 134.4 135.0 6.6 78.2 6.8 80.6 7.0 83.1 7.1 84.4 7.2 85.7 7.4 88.3 7.6 91.0 7.8 93.7 8.2 97.4 143.4 143.5 143.7 143.8 143.9 144.1 144.3 144.7 144.9 6.1 6.3 6.5 6.5 6.6 6.8 7.0 7.2 7.5 70.2 70.9 71.7 72.0 72.5 73.0 73.8 74.6 75.6 142.1 140.0 138.0 137.0 136.1 134.0 132.2 130.5 128.0 5.5 5.6 5.8 5.8 5.9 6.0 6.2 6.3 6.5 7.4 7.5 7.7 7.8 7.9 8.1 8.3 8.5 8.8 142.6 144.0 145.4 146.1 146.8 148.2 149.7 151.2 153.4 6.8 87.5 152.8 6.9 90.5 154.4 7.1 93.5 155.9 7.2 95.1 156.6 7.3 96.7 157.4 7.4 99.9 158.9 7.6 103.1 160.5 7.8 106.4 162.2 8.1 111.5 164.8 6.2 85.7 6.4 87.9 6.5 89.5 6.6 90.5 6.7 91.3 6.8 93.0 7.0 94.7 7.2 96.4 7.4 99.1 163.6 163.9 163.1 163.1 162.8 162.3 161.8 161.4 161.0 5.7 5.9 6.0 6.1 6.1 6.3 6.4 6.5 6.7 74.2 74.9 75.8 76.1 76.5 77.2 77.8 78.5 79.4 157.2 155.6 154.5 153.8 153.2 151.9 150.6 149.4 147.7 5.1 5.2 5.3 5.4 5.4 5.5 5.6 5.7 5.8 MODEL YCAS0100EC 40.0 82.1 42.0 84.8 44.0 87.5 45.0 88.9 46.0 90.3 48.0 93.2 50.0 96.1 52.0 99.2 55.0 103.8 106.7 106.6 106.5 106.5 106.6 106.6 106.6 106.6 106.8 8.4 81.0 8.7 83.5 9.0 86.2 9.1 87.6 9.2 88.9 9.5 91.7 9.8 94.6 10.1 97.5 10.6 102.0 115.1 115.1 115.0 115.0 114.9 115.1 115.2 115.3 115.6 MODEL YCAS0110EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 93.8 97.0 100.3 101.9 103.6 107.0 110.5 114.1 119.5 123.9 125.1 126.3 126.9 127.5 128.7 129.8 131.0 132.9 8.0 8.2 8.4 8.5 8.7 8.9 9.1 9.3 9.6 91.6 94.7 97.8 99.4 101.1 104.4 107.8 111.3 116.6 133.0 134.3 135.6 136.2 136.8 138.1 139.4 140.7 142.8 89.5 92.5 95.6 97.2 98.8 102.0 105.4 108.7 113.9 NOTES: 1. 2. 3. 4. 5. 6. kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panels 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590-98 Certified in accordance with the ARI Water-Chilling Packages Using the Vapor Compression Cycle Certification Program, which is based on ARI Standard 550/590. YORK INTERNATIONAL 15 Ratings – English Units AIR TEMPERATURE ON CONDENSER (°F) LCWT (°F) 75 TONS kW 80 EER TONS MODEL YCAS0120EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 110.8 114.5 118.4 120.3 122.3 126.4 130.4 134.6 141.2 89.9 90.5 91.1 91.3 91.6 92.0 92.5 92.9 93.5 12.5 12.9 13.2 13.4 13.6 14.0 14.4 14.8 15.4 129.4 134.0 138.6 141.0 143.3 148.1 152.9 157.8 165.2 97.1 98.6 100.0 100.6 101.3 102.6 103.8 104.9 106.6 13.9 14.2 14.5 14.7 14.9 15.2 15.5 15.9 16.4 125.0 129.4 133.9 136.2 138.4 143.0 147.7 152.5 159.8 MODEL YCAS0140EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 133.3 137.8 142.5 144.9 147.3 152.2 157.1 162.3 170.1 99.9 100.8 101.7 102.1 102.5 103.3 104.0 104.7 105.7 14.0 14.4 14.7 14.9 15.1 15.5 15.9 16.3 17.0 129.9 134.3 138.8 141.1 143.4 148.1 153.0 157.9 165.6 85 EER TONS 90 kW EER TONS 104.7 105.3 105.9 106.1 106.4 106.9 107.4 107.9 108.6 10.5 10.8 11.1 11.2 11.4 11.7 12.0 12.4 12.9 110.2 111.9 113.5 114.3 115.0 116.6 118.1 119.5 121.5 116.0 117.0 117.9 118.4 118.8 119.7 120.4 121.1 122.1 95 kW EER TONS kW EER 103.6 106.9 110.4 112.2 113.9 117.6 121.4 125.2 131.1 113.1 113.8 114.4 114.7 114.9 115.5 116.0 116.6 117.4 9.6 9.9 10.1 10.3 10.4 10.7 11.0 11.3 11.8 101.7 105.0 108.3 110.0 111.8 115.3 119.0 122.7 128.4 122.3 8.8 123.0 9.1 123.6 9.3 123.9 9.4 124.2 9.6 124.8 9.8 125.4 10.1 126.1 10.3 127.1 10.8 11.6 11.9 12.1 12.3 12.4 12.7 12.9 13.2 13.6 116.6 120.8 125.0 127.2 129.3 133.7 138.0 142.5 149.4 117.6 119.3 121.0 121.9 122.7 124.4 126.1 127.7 129.9 10.6 10.8 11.1 11.2 11.3 11.5 11.8 12.0 12.4 112.8 116.8 120.9 123.0 125.1 129.3 133.6 137.9 144.6 125.4 127.3 129.2 130.1 131.0 132.8 134.7 136.4 138.9 9.7 9.9 10.1 10.2 10.3 10.5 10.7 11.0 11.3 11.7 12.0 12.3 12.4 12.6 12.9 13.3 13.6 14.2 124.3 128.4 132.6 134.7 136.9 141.3 145.8 150.5 157.6 125.2 126.2 127.2 127.7 128.2 129.1 129.9 130.7 131.7 10.7 10.9 11.2 11.4 11.5 11.8 12.1 12.4 12.9 122.0 125.9 130.0 132.1 134.1 138.4 142.8 147.3 154.2 135.2 136.3 137.3 137.9 138.4 139.4 140.2 141.1 142.3 9.8 10.0 10.3 10.4 10.5 10.8 11.1 11.4 11.8 (IPLV = 10.0) 108.1 96.9 111.7 97.6 115.4 98.1 117.3 98.4 119.1 98.6 123.0 99.1 127.1 99.5 131.2 100.0 137.5 100.7 MODEL YCAS0130EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 kW 11.5 11.8 12.1 12.3 12.4 12.8 13.2 13.5 14.1 105.7 109.2 112.7 114.6 116.4 120.1 124.1 128.0 134.1 (IPLV = 10.7) 103.4 12.7 105.0 13.0 106.4 13.3 107.2 13.4 107.9 13.6 109.3 13.9 110.7 14.2 111.9 14.5 113.7 15.0 120.7 125.0 129.4 131.6 133.8 138.2 142.8 147.4 154.5 (IPLV = 11.3) 107.5 12.8 108.5 13.1 109.4 13.4 109.8 13.6 110.3 13.8 111.1 14.2 111.8 14.5 112.5 14.9 113.4 15.5 126.9 131.2 135.5 137.7 140.0 144.5 149.2 154.0 161.4 NOTES: 1. 2. 3. 4. 5. 6. 16 kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panels 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590-98 Certified in accordance with the ARI Water-Chilling Packages Using the Vapor Compression Cycle Certification Program, which is based on ARI Standard 550/590. YORK INTERNATIONAL FORM 201.18-EG1 AIR TEMPERATURE ON CONDENSER (°F) LCWT (°F) 100 TONS kW 105 EER TONS kW 110 EER TONS kW 115 EER TONS kW 120 EER TONS kW 125 EER TONS kW EER MODEL YCAS0120EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 100.1 103.3 106.5 108.2 109.9 113.3 116.8 120.5 126.0 132.2 132.9 133.6 133.9 134.2 134.9 135.6 136.4 137.6 8.1 8.3 8.5 8.6 8.8 9.0 9.2 9.5 9.8 98.7 101.8 105.0 106.6 108.2 111.5 114.9 118.5 123.9 142.7 143.5 144.2 144.6 145.0 145.8 146.7 147.6 149.0 7.5 7.7 7.9 8.0 8.1 8.3 8.5 8.7 9.0 97.4 100.5 103.6 105.1 106.7 110.0 113.3 116.8 122.1 153.8 154.7 155.6 156.1 156.6 157.6 158.6 159.6 161.2 6.9 7.1 7.2 7.3 7.4 7.6 7.8 8.0 8.3 96.3 99.3 102.3 103.8 105.3 107.1 108.9 110.9 113.8 165.6 166.7 167.7 168.3 168.6 167.4 166.3 165.6 164.2 6.4 6.5 6.7 6.8 6.8 7.0 7.2 7.3 7.6 87.1 88.8 90.4 91.2 92.1 93.8 95.5 97.2 99.9 164.6 164.0 163.3 162.9 162.6 161.9 161.3 160.7 159.8 5.8 5.9 6.0 6.1 6.2 6.3 6.5 6.6 6.8 74.5 75.1 76.0 76.4 76.7 77.4 78.1 78.8 79.8 158.5 156.9 155.7 154.9 154.2 152.7 151.2 149.7 147.6 5.1 5.2 5.3 5.4 5.4 5.5 5.6 5.7 5.8 8.1 8.2 8.4 8.5 8.6 8.8 8.9 9.1 9.4 102.2 106.1 109.9 111.8 113.7 117.6 121.6 125.6 131.8 152.3 154.7 157.1 158.2 159.4 161.8 164.2 166.4 169.8 7.4 7.5 7.7 7.8 7.8 8.0 8.2 8.3 8.6 99.2 102.9 106.6 108.5 110.3 114.1 118.0 122.0 128.1 162.5 165.0 167.6 168.9 170.1 172.7 175.2 177.7 181.4 6.7 6.9 7.0 7.1 7.2 7.3 7.5 7.6 7.8 96.3 99.9 103.5 105.3 107.2 110.9 114.7 118.6 124.6 173.2 175.9 178.7 180.1 181.5 184.2 186.9 189.6 193.7 6.2 6.3 6.4 6.5 6.6 6.7 6.8 7.0 7.2 93.6 97.1 100.6 102.3 102.6 103.3 104.4 105.1 106.3 184.5 187.5 190.4 191.7 190.7 189.0 188.2 187.0 185.2 5.6 5.8 5.9 6.0 6.0 6.1 6.2 6.3 6.4 8.2 8.4 8.6 8.7 8.8 9.1 9.3 9.5 9.9 116.5 120.1 123.9 125.8 127.7 131.6 135.7 139.8 146.2 169.7 171.2 172.6 173.3 174.0 175.2 176.5 177.7 179.6 7.6 7.8 7.9 8.0 8.1 8.3 8.5 8.7 9.0 115.1 118.6 122.3 124.2 126.0 129.9 133.8 137.9 144.1 182.7 184.3 185.9 186.6 187.4 188.8 190.3 191.7 193.9 7.0 7.2 7.3 7.4 7.5 7.7 7.8 8.0 8.3 113.7 117.3 120.8 122.7 124.5 128.3 132.2 136.1 140.8 196.3 198.1 199.8 200.7 201.5 203.2 204.9 206.6 207.1 6.5 6.6 6.8 6.8 6.9 7.1 7.2 7.4 7.6 102.4 103.2 104.0 104.4 104.8 105.5 106.3 107.1 108.3 195.2 193.5 191.8 191.0 190.2 188.4 186.7 185.0 182.4 5.9 6.0 6.0 6.1 6.1 6.2 6.3 6.4 6.6 MODEL YCAS0130EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 108.9 113.1 117.0 119.0 121.1 125.2 129.3 133.6 140.1 133.7 135.9 137.9 138.9 139.9 141.9 143.9 145.8 148.6 8.8 9.0 9.2 9.3 9.4 9.6 9.8 10.0 10.3 105.6 109.5 113.3 115.3 117.3 121.3 125.3 129.5 135.8 142.8 145.0 147.2 148.3 149.3 151.5 153.7 155.8 158.9 MODEL YCAS0140EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 119.9 123.8 127.7 129.7 131.7 135.9 140.1 144.5 151.2 145.9 147.1 148.3 148.9 149.5 150.5 151.4 152.4 153.8 9.0 9.2 9.4 9.5 9.6 9.9 10.1 10.4 10.8 118.1 121.8 125.7 127.6 129.6 133.6 137.8 142.0 148.6 157.4 158.8 160.1 160.7 161.3 162.4 163.5 164.6 166.2 NOTES: 1. 2. 3. 4. 5. 6. kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panels 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590-98 Certified in accordance with the ARI Water-Chilling Packages Using the Vapor Compression Cycle Certification Program, which is based on ARI Standard 550/590. YORK INTERNATIONAL 17 Ratings – English Units AIR TEMPERATURE ON CONDENSER (°F) LCWT (°F) 75 TONS kW 80 EER TONS MODEL YCAS0150EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 152.2 157.5 162.8 165.5 168.2 173.7 178.9 185.0 193.8 118.3 119.8 121.3 122.1 122.8 124.2 125.5 126.9 128.8 13.8 14.1 14.4 14.5 14.7 15.0 15.3 15.7 16.2 147.7 152.7 157.9 160.5 163.1 168.5 173.9 179.1 187.9 MODEL YCAS0160EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 167.4 173.2 179.0 182.0 185.0 191.0 197.0 203.1 212.4 136.0 138.2 140.3 141.4 142.4 144.5 146.5 148.5 151.5 13.4 13.6 13.9 14.0 14.1 14.4 14.7 15.0 15.4 161.9 167.5 173.1 176.0 178.9 184.7 190.6 196.5 205.6 MODEL YCAS0170EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 170.8 176.6 182.5 185.5 188.5 194.5 200.7 207.0 216.6 138.8 140.7 142.4 143.3 144.2 145.9 147.5 149.2 151.6 13.4 13.7 14.0 14.1 14.3 14.6 14.9 15.2 15.7 166.1 171.7 177.4 180.3 183.2 189.1 195.1 201.1 210.5 kW 85 EER TONS 90 95 kW EER TONS kW EER TONS kW EER 135.4 137.2 138.8 139.6 140.6 142.3 143.8 145.4 147.7 11.5 11.7 12.0 12.1 12.3 12.5 12.8 13.1 13.5 139.5 144.3 149.1 151.6 154.1 159.1 164.2 169.4 177.4 145.1 147.0 148.8 149.7 150.6 152.5 154.2 155.9 158.5 10.5 10.7 11.0 11.1 11.2 11.4 11.7 11.9 12.3 135.9 140.5 145.2 147.6 150.0 154.9 159.7 164.9 172.7 155.6 157.6 159.6 160.5 161.5 163.4 165.2 167.3 170.1 9.6 9.8 10.0 10.1 10.2 10.4 10.7 10.9 11.2 156.1 162.0 167.5 170.3 173.0 178.7 184.4 190.3 199.0 153.9 156.6 159.2 160.4 161.8 164.2 166.7 169.1 172.8 11.1 11.4 11.6 11.7 11.8 12.0 12.2 12.4 12.8 151.5 156.8 162.2 164.9 167.6 173.0 178.6 184.3 192.8 164.3 167.0 169.7 171.0 172.3 175.2 177.9 180.6 184.6 10.2 10.4 10.6 10.7 10.8 10.9 11.1 11.3 11.6 146.6 151.8 157.0 159.7 162.3 167.3 173.1 178.6 187.0 175.1 178.1 181.0 182.4 183.9 186.5 189.9 192.8 197.3 9.3 9.5 9.6 9.7 9.8 10.0 10.2 10.3 10.6 161.5 167.2 172.7 175.5 178.3 184.0 189.8 195.8 204.8 159.2 161.5 163.6 164.6 165.7 167.6 169.6 171.6 174.6 11.2 11.4 11.6 11.8 11.9 12.1 12.4 12.6 13.0 157.7 162.7 168.3 171.0 173.8 179.3 185.0 190.7 199.5 171.0 173.0 175.4 176.6 177.7 179.9 182.1 184.3 187.6 10.2 10.4 10.6 10.7 10.9 11.1 11.3 11.5 11.8 153.9 159.0 164.2 166.7 169.6 174.6 180.4 186.1 194.6 183.4 185.8 188.2 189.3 190.7 192.9 195.6 198.0 201.7 9.3 9.5 9.7 9.8 9.9 10.1 10.3 10.5 10.8 (IPLV = 10.9) 126.4 12.6 128.1 12.9 129.8 13.1 130.6 13.3 131.3 13.4 132.8 13.7 134.3 14.0 135.7 14.3 137.9 14.8 143.5 148.4 153.2 155.6 158.4 163.6 168.9 174.3 182.5 (IPLV = 10.7) 144.6 147.0 149.4 150.6 151.7 154.0 156.2 158.4 161.7 12.2 12.4 12.7 12.8 12.9 13.2 13.4 13.6 14.0 (IPLV = 11.1) 148.7 150.7 152.6 153.5 154.5 156.3 158.1 159.9 162.6 12.2 12.5 12.7 12.9 13.0 13.3 13.6 13.8 14.3 NOTES: 1. 2. 3. 4. 5. 6. 18 kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panels 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590-98 Certified in accordance with the ARI Water-Chilling Packages Using the Vapor Compression Cycle Certification Program, which is based on ARI Standard 550/590. YORK INTERNATIONAL FORM 201.18-EG1 AIR TEMPERATURE ON CONDENSER (°F) LCWT (°F) 100 TONS kW 105 EER TONS kW 110 EER TONS kW 115 EER TONS kW 120 EER TONS kW 125 EER TONS kW EER MODEL YCAS0150EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 132.5 137.0 141.6 143.9 146.2 151.0 155.8 160.8 168.4 166.8 169.0 171.1 172.2 173.2 175.3 177.3 179.4 182.7 8.8 9.0 9.2 9.3 9.3 9.5 9.7 10.0 10.2 129.4 133.7 138.2 140.5 142.8 147.4 152.1 157.0 164.1 178.8 181.1 183.4 184.6 185.7 188.0 190.3 192.6 196.0 8.0 8.2 8.4 8.5 8.6 8.7 8.9 9.1 9.4 126.5 130.8 135.1 137.3 139.5 144.1 148.7 153.5 160.6 191.6 194.1 196.6 197.8 199.0 201.5 204.0 206.6 210.4 7.4 7.5 7.7 7.8 7.8 8.0 8.2 8.3 8.6 123.8 128.0 132.3 134.5 136.6 141.1 145.6 150.2 157.2 205.0 207.7 210.4 211.8 213.2 215.9 218.7 221.5 225.8 6.8 6.9 7.1 7.1 7.2 7.3 7.5 7.6 7.9 121.2 124.9 127.3 128.5 129.7 132.1 134.6 137.0 138.6 219.1 221.3 221.1 221.2 221.2 221.2 221.2 221.3 218.6 6.2 6.4 6.5 6.5 6.6 6.7 6.9 7.0 7.1 100.5 101.2 102.0 102.3 102.6 103.3 104.0 104.7 105.6 204.2 202.9 201.6 201.0 200.3 199.0 197.8 196.6 194.9 5.5 5.6 5.7 5.7 5.7 5.8 5.9 5.9 6.1 7.7 7.9 8.0 8.1 8.2 8.3 8.5 8.6 8.8 133.6 138.4 143.3 145.7 148.2 153.3 158.3 163.5 171.3 212.2 215.8 219.4 221.3 223.1 226.8 230.6 234.4 240.3 7.1 7.2 7.4 7.4 7.5 7.6 7.8 7.9 8.1 129.7 134.5 139.2 141.6 144.1 149.0 154.0 159.1 166.8 226.0 229.9 233.8 235.8 237.8 241.8 245.9 250.1 256.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.4 126.0 129.7 130.7 131.3 131.8 132.7 133.6 134.4 135.6 240.6 243.1 240.9 240.4 239.5 237.8 236.1 234.6 232.5 5.9 6.0 6.1 6.2 6.2 6.3 6.4 6.5 6.6 97.9 98.7 99.3 99.6 99.9 100.5 101.1 101.6 102.4 214.5 213.5 212.6 212.2 211.8 211.0 210.3 209.6 208.7 5.1 5.2 5.2 5.3 5.3 5.4 5.4 5.4 5.5 7.8 8.0 8.1 8.2 8.3 8.5 8.6 8.8 9.0 144.1 148.9 153.8 156.3 158.5 163.8 169.0 174.2 182.2 226.2 229.3 232.5 234.0 235.5 238.8 242.0 245.4 250.4 7.2 7.3 7.5 7.5 7.6 7.8 7.9 8.0 8.3 141.3 146.0 150.8 153.2 155.2 158.2 161.3 164.2 169.0 242.0 245.5 248.9 250.7 251.7 252.0 252.7 253.2 254.2 6.6 6.7 6.9 6.9 7.0 7.1 7.2 7.4 7.5 128.5 130.8 131.7 132.2 132.7 133.6 134.6 135.4 136.5 242.6 242.8 240.6 239.9 238.9 237.0 235.1 233.3 230.5 6.0 6.1 6.2 6.2 6.3 6.4 6.5 6.6 6.7 98.3 99.0 99.7 100.0 100.3 100.9 101.6 102.1 103.0 216.2 215.1 214.0 213.5 212.9 211.9 210.9 209.8 208.4 5.1 5.2 5.2 5.3 5.3 5.4 5.4 5.5 5.5 MODEL YCAS0160EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 142.0 147.1 152.2 154.8 157.4 162.6 167.9 173.3 181.4 186.8 189.9 193.0 194.6 196.2 199.3 202.5 205.7 210.8 8.5 8.6 8.8 8.9 9.0 9.1 9.3 9.4 9.7 137.7 142.6 147.6 150.1 152.7 157.8 163.0 168.2 176.2 199.1 202.4 205.8 207.5 209.2 212.7 216.1 219.6 225.3 MODEL YCAS0170EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 150.4 155.2 160.5 163.1 165.7 170.9 176.3 181.8 190.2 196.8 199.3 202.0 203.3 204.6 207.4 210.0 212.7 216.9 8.5 8.7 8.9 9.0 9.1 9.2 9.4 9.6 9.9 147.1 152.1 156.8 159.5 162.1 167.3 172.5 177.8 186.0 211.0 213.9 216.6 218.2 219.6 222.5 225.5 228.5 233.2 NOTES: 1. 2. 3. 4. 5. 6. kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panels 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590-98 Certified in accordance with the ARI Water-Chilling Packages Using the Vapor Compression Cycle Certification Program, which is based on ARI Standard 550/590. YORK INTERNATIONAL 19 Ratings – English Units AIR TEMPERATURE ON CONDENSER (°F) LCWT (°F) 75 TONS kW 80 EER TONS MODEL YCAS0180EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 174.2 180.0 185.9 189.0 192.0 198.1 204.5 210.9 220.8 141.7 143.1 144.6 145.2 145.9 147.2 148.5 149.8 151.7 13.4 13.7 14.0 14.2 14.4 14.7 15.1 15.4 15.9 170.3 175.9 181.7 184.6 187.5 193.5 199.6 205.8 215.4 MODEL YCAS0200EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 198.9 205.7 212.7 216.2 219.7 226.9 234.1 241.4 252.5 159.4 161.9 164.4 165.6 166.8 169.2 171.5 173.8 177.1 13.4 13.7 14.0 14.1 14.3 14.5 14.8 15.1 15.5 192.3 198.9 205.7 209.1 212.6 219.5 226.5 233.6 244.4 MODEL YCAS0210EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 202.6 209.6 216.5 220.1 223.7 230.9 238.2 245.7 256.9 162.4 164.5 166.6 167.6 168.6 170.5 172.4 174.3 176.9 13.5 13.8 14.1 14.2 14.4 14.7 15.0 15.3 15.8 197.0 203.7 210.5 213.9 217.4 224.4 231.6 238.8 249.9 kW 85 EER 90 95 TONS kW EER TONS kW EER TONS kW EER 166.9 172.3 177.8 180.6 183.5 189.3 195.2 201.3 210.6 164.5 166.4 168.0 168.8 169.5 171.1 172.6 174.1 176.3 11.2 11.4 11.7 11.8 12.0 12.2 12.5 12.8 13.2 163.8 169.1 174.5 177.2 179.9 185.5 191.3 197.2 206.2 177.6 179.4 181.2 182.2 183.0 184.7 186.4 188.0 190.6 10.2 10.5 10.7 10.8 10.9 11.2 11.4 11.7 12.1 161.1 166.2 171.5 174.1 176.8 182.2 187.8 193.5 202.3 191.7 193.6 195.5 196.4 197.6 199.5 201.3 203.2 206.1 9.4 9.6 9.8 9.9 10.0 10.2 10.4 10.7 11.0 185.9 192.5 199.0 202.4 205.7 212.5 219.3 226.2 236.7 180.6 183.5 186.4 187.8 189.2 192.0 194.8 197.6 201.7 11.2 11.5 11.7 11.8 11.9 12.1 12.4 12.6 12.9 180.0 186.3 192.6 195.9 199.2 205.7 212.4 219.1 229.4 192.5 195.6 198.7 200.2 201.7 204.8 207.8 210.9 215.4 10.3 10.5 10.7 10.8 10.9 11.1 11.3 11.5 11.8 174.2 180.4 186.6 189.8 192.9 199.3 205.8 212.4 222.4 205.1 208.5 211.8 213.5 215.1 218.4 221.8 225.1 230.1 9.4 9.6 9.7 9.8 9.9 10.1 10.3 10.5 10.8 191.8 198.2 204.8 208.2 211.5 218.3 225.3 232.4 243.2 186.3 188.7 191.0 192.2 193.3 195.6 197.8 200.0 203.4 11.3 11.5 11.8 11.9 12.0 12.3 12.5 12.8 13.2 186.9 193.2 199.6 202.8 206.1 212.7 219.5 226.4 236.9 199.8 202.4 204.9 206.1 207.3 209.8 212.2 214.7 218.3 10.3 10.5 10.7 10.9 11.0 11.2 11.4 11.7 12.0 182.4 188.5 194.8 197.9 201.1 207.5 214.1 220.8 231.0 214.3 217.0 219.8 221.1 222.4 225.1 227.8 230.5 234.6 9.4 9.6 9.8 9.9 10.0 10.2 10.4 10.7 11.0 (IPLV = 11.4) 152.7 154.3 155.7 156.5 157.2 158.6 160.0 161.4 163.4 12.2 12.5 12.8 13.0 13.1 13.4 13.7 14.0 14.5 (IPLV = 10.7) 169.6 172.3 175.0 176.3 177.6 180.2 182.7 185.2 189.0 12.3 12.5 12.8 12.9 13.0 13.3 13.5 13.8 14.2 (IPLV = 11.0) 173.9 176.1 178.3 179.4 180.4 182.5 184.6 186.6 189.6 12.3 12.6 12.9 13.0 13.1 13.4 13.7 14.0 14.4 NOTES: 1. 2. 3. 4. 5. 6. 20 kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panels 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590-98 Certified in accordance with the ARI Water-Chilling Packages Using the Vapor Compression Cycle Certification Program, which is based on ARI Standard 550/590. YORK INTERNATIONAL FORM 201.18-EG1 AIR TEMPERATURE ON CONDENSER (°F) LCWT (°F) 100 TONS kW 105 EER TONS kW 110 EER TONS kW 115 EER TONS kW 120 EER TONS kW 125 EER TONS kW EER MODEL YCAS0180EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 158.7 163.6 168.8 171.4 174.0 179.3 184.7 190.3 198.9 206.9 208.9 211.0 212.1 213.1 215.4 217.5 219.7 222.9 8.6 8.8 9.0 9.1 9.2 9.4 9.6 9.8 10.1 156.3 161.5 166.4 169.0 171.5 176.7 182.0 187.4 195.8 222.8 225.3 227.6 228.8 230.0 232.3 234.9 237.3 241.1 7.9 8.1 8.2 8.3 8.4 8.6 8.8 8.9 9.2 154.7 159.4 164.3 166.8 169.3 174.4 179.6 184.9 193.1 240.2 242.9 245.5 246.8 248.1 250.7 253.3 256.4 260.5 7.3 7.4 7.6 7.7 7.7 7.9 8.0 8.2 8.4 152.9 157.1 162.4 164.8 166.2 167.2 168.6 169.4 171.2 258.1 260.8 264.1 265.6 265.8 262.4 259.5 256.3 251.9 6.7 6.8 7.0 7.1 7.1 7.2 7.4 7.5 7.7 130.9 131.8 132.7 133.2 133.6 134.5 135.5 136.3 137.4 244.5 242.4 240.4 239.3 238.3 236.1 234.1 231.9 228.6 6.1 6.2 6.2 6.3 6.3 6.4 6.5 6.6 6.8 98.7 99.4 100.0 100.4 100.7 101.3 102.0 102.7 103.7 217.9 216.7 215.4 214.8 214.1 212.8 211.4 210.1 208.0 5.1 5.2 5.2 5.3 5.3 5.4 5.4 5.5 5.6 7.8 8.0 8.1 8.2 8.3 8.4 8.6 8.7 9.0 158.8 164.5 170.3 173.2 176.2 182.1 188.2 194.3 203.7 248.3 252.4 256.6 258.7 260.8 265.0 269.3 273.7 280.3 7.2 7.3 7.4 7.5 7.6 7.7 7.9 8.0 8.2 154.2 159.8 165.1 168.3 171.2 177.1 183.0 189.0 198.2 264.1 268.8 273.1 275.6 277.9 282.5 287.1 291.9 299.1 6.6 6.7 6.8 6.9 6.9 7.1 7.2 7.3 7.5 149.9 155.4 160.3 163.8 166.0 171.7 172.7 173.9 175.3 281.2 285.9 290.5 293.5 295.4 299.8 296.8 294.9 291.5 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 129.3 129.9 130.9 131.3 131.7 132.6 133.4 134.2 135.2 271.1 269.0 267.5 266.8 266.1 264.7 263.4 262.3 260.7 5.4 5.4 5.5 5.5 5.6 5.6 5.7 5.7 5.8 7.9 8.1 8.2 8.3 8.4 8.6 8.7 8.9 9.2 170.8 176.5 182.3 185.2 188.2 194.2 200.3 206.5 215.6 263.8 267.4 270.9 272.7 274.5 278.1 281.7 285.3 290.2 7.3 7.4 7.6 7.6 7.7 7.9 8.0 8.2 8.4 167.4 171.9 176.5 178.8 181.2 186.0 190.7 195.6 203.1 282.1 284.5 286.7 287.9 289.0 291.3 293.6 296.0 299.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.5 7.7 157.4 161.6 165.9 168.1 169.9 172.8 173.9 175.1 176.7 290.6 293.0 295.5 296.7 297.4 297.7 294.7 292.3 288.4 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 130.0 130.7 131.6 132.0 132.4 133.3 134.1 134.9 135.7 271.9 270.0 268.3 267.5 266.6 264.9 263.3 261.8 259.3 5.4 5.4 5.5 5.5 5.6 5.6 5.7 5.8 5.9 MODEL YCAS0200EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 168.8 174.8 180.9 183.9 187.0 193.3 199.5 206.0 215.8 218.7 222.3 225.8 227.6 229.4 233.0 236.6 240.3 245.8 8.6 8.7 8.9 9.0 9.1 9.2 9.4 9.6 9.8 163.6 169.5 175.4 178.4 181.4 187.5 193.7 200.0 209.5 233.0 236.9 240.8 242.7 244.6 248.6 252.5 256.5 262.5 MODEL YCAS0210EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 178.3 184.2 190.3 193.3 196.4 202.7 209.1 215.6 225.6 229.8 232.8 235.7 237.2 238.7 241.6 244.6 247.5 252.0 8.6 8.8 9.0 9.1 9.2 9.4 9.6 9.7 10.0 174.4 180.2 186.1 189.1 192.2 198.3 204.5 210.9 220.7 246.3 249.6 252.8 254.4 256.0 259.3 262.5 265.8 270.8 NOTES: 1. 2. 3. 4. 5. 6. kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panels 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590-98 Certified in accordance with the ARI Water-Chilling Packages Using the Vapor Compression Cycle Certification Program, which is based on ARI Standard 550/590. YORK INTERNATIONAL 21 Ratings – English Units AIR TEMPERATURE ON CONDENSER (°F) LCWT (°F) 75 TONS kW 80 EER TONS MODEL YCAS0230EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 212.6 219.7 227.0 230.7 234.4 242.0 249.7 257.5 269.6 165.4 167.1 168.7 169.5 170.3 171.8 173.3 174.8 176.9 13.9 14.2 14.6 14.8 14.9 15.3 15.7 16.0 16.6 207.8 214.7 221.7 225.3 228.9 236.2 243.7 251.3 263.1 MODEL YCAS0250EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 259.1 268.1 277.0 281.7 286.2 295.4 304.8 314.3 328.7 203.2 206.6 209.8 211.4 212.9 216.0 219.1 222.1 226.5 13.8 14.1 14.4 14.5 14.6 14.9 15.2 15.5 15.9 250.6 259.3 267.9 272.3 276.8 285.8 294.9 303.6 318.1 MODEL YCAS0270EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 276.1 285.3 294.7 299.5 304.3 314.0 323.8 333.8 349.0 226.1 229.4 232.6 234.2 235.8 238.9 241.9 245.0 249.5 13.4 13.6 13.9 14.0 14.2 14.5 14.7 15.0 15.4 268.3 277.3 286.3 291.0 295.7 305.1 314.7 324.4 339.2 kW 85 EER TONS kW 90 95 EER TONS kW EER TONS kW EER 192.0 11.6 193.9 11.9 195.7 12.2 196.6 12.3 197.4 12.5 199.1 12.8 200.8 13.1 202.5 13.4 205.0 13.8 199.7 206.1 212.7 216.1 219.5 226.3 233.4 240.6 251.7 207.1 209.1 211.0 212.0 212.9 214.8 216.6 218.5 221.2 10.6 10.9 11.1 11.3 11.4 11.7 11.9 12.2 12.6 196.4 202.6 209.0 212.2 215.5 222.2 229.1 236.1 246.9 223.4 225.6 227.7 228.7 229.7 231.8 233.8 235.9 239.0 9.8 10.0 10.2 10.3 10.4 10.7 10.9 11.2 11.5 242.4 250.8 259.3 263.6 267.8 276.6 285.5 294.5 308.1 230.4 234.2 237.9 239.8 241.9 245.6 249.2 252.9 258.4 11.5 11.8 12.0 12.1 12.2 12.4 12.6 12.9 13.2 234.5 242.7 251.0 255.2 259.5 267.9 276.5 285.2 298.5 245.6 249.7 253.7 255.7 257.7 261.9 266.0 270.0 276.1 10.5 10.7 10.9 11.0 11.1 11.3 11.5 11.7 12.0 227.0 235.0 243.1 247.2 251.3 259.7 268.1 276.5 289.5 261.9 266.3 270.6 272.8 274.9 279.3 283.6 288.3 295.0 9.6 9.8 10.0 10.1 10.2 10.4 10.5 10.7 11.0 261.0 269.8 278.6 283.1 287.6 296.7 306.1 315.5 329.9 259.2 263.0 266.7 268.6 270.6 274.3 277.9 281.6 287.1 11.1 11.4 11.6 11.7 11.8 12.0 12.3 12.5 12.8 254.1 262.6 271.3 275.7 280.1 288.9 298.0 307.2 321.2 277.8 281.9 285.9 287.9 289.9 294.1 298.2 302.2 308.4 10.2 10.4 10.6 10.7 10.8 11.0 11.2 11.4 11.7 247.7 256.0 264.4 268.7 273.0 281.7 290.6 299.5 313.1 297.8 302.2 306.6 308.7 310.9 315.3 319.8 324.4 331.2 9.3 9.5 9.7 9.8 9.8 10.0 10.2 10.4 10.6 (IPLV = 11.9) 178.1 12.7 179.9 13.0 181.6 13.3 182.4 13.5 183.2 13.6 184.8 14.0 186.4 14.3 187.9 14.6 190.2 15.2 203.6 210.1 216.9 220.4 223.9 231.0 238.3 245.7 257.1 (IPLV = 14.2) 216.2 219.7 223.5 225.2 226.9 230.3 233.6 236.7 241.9 12.6 12.9 13.1 13.2 13.4 13.6 13.9 14.1 14.5 (IPLV = 14.2) 241.9 245.4 249.0 250.8 252.5 255.9 259.2 262.5 267.5 12.2 12.5 12.7 12.8 12.9 13.2 13.4 13.7 14.1 NOTES: 1. 2. 3. 4. 5. 22 kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panel’s 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590. YORK INTERNATIONAL FORM 201.18-EG1 AIR TEMPERATURE ON CONDENSER (°F) LCWT (°F) 100 TONS kW 105 EER TONS kW 110 EER TONS kW 115 EER TONS kW 120 EER TONS kW 125 EER TONS kW EER MODEL YCAS0230EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 193.4 199.5 205.7 208.8 212.0 218.6 225.2 232.0 242.6 240.9 243.3 245.6 246.8 247.9 250.2 252.5 254.7 258.3 9.0 9.2 9.4 9.5 9.6 9.8 10.0 10.2 10.5 190.7 196.7 202.8 205.8 209.0 215.3 221.8 228.5 238.7 259.6 262.2 264.8 266.1 267.4 270.0 272.5 275.1 279.1 8.2 8.4 8.6 8.7 8.8 9.0 9.2 9.4 9.6 188.4 194.1 200.1 203.1 206.2 212.4 218.8 225.3 234.3 279.4 282.3 285.2 286.7 288.1 291.0 294.0 296.9 300.0 7.6 7.8 7.9 8.0 8.1 8.2 8.4 8.6 8.8 185.9 189.4 193.1 195.0 196.9 200.7 204.3 208.3 214.3 300.0 300.0 300.0 300.0 300.0 300.0 300.0 300.0 300.0 7.0 7.1 7.3 7.4 7.4 7.6 7.7 7.9 8.1 169.8 172.8 175.9 177.5 178.3 179.1 180.4 181.5 183.4 300.0 300.0 300.0 300.0 298.8 295.6 292.6 289.7 285.3 6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.3 134.5 135.4 136.3 136.7 137.1 138.0 138.9 139.7 140.2 272.8 271.0 269.1 268.2 267.2 265.2 263.3 261.3 257.8 5.6 5.6 5.7 5.7 5.8 5.8 5.9 6.0 6.1 8.0 8.2 8.3 8.4 8.5 8.6 8.8 8.9 9.1 206.9 214.3 221.7 225.7 229.6 237.4 245.2 253.2 265.4 317.3 322.7 328.0 330.9 333.7 339.2 344.8 350.5 359.2 7.3 7.5 7.6 7.7 7.8 7.9 8.0 8.2 8.4 200.9 208.2 215.6 219.4 223.2 230.8 238.6 246.4 258.3 338.0 343.8 349.6 352.6 355.6 361.6 367.7 373.9 383.4 6.7 6.8 7.0 7.0 7.1 7.2 7.4 7.5 7.7 195.3 201.9 204.3 205.4 206.6 208.8 210.8 212.8 215.5 359.9 365.0 359.3 356.5 355.0 350.0 345.3 340.8 334.3 6.1 6.3 6.4 6.5 6.6 6.7 6.9 7.0 7.3 157.0 158.6 160.2 161.0 161.8 163.2 164.7 166.1 168.0 306.3 302.8 299.4 297.8 296.3 293.2 290.3 287.6 283.8 5.7 5.9 6.0 6.0 6.1 6.2 6.3 6.4 6.6 7.8 7.9 8.1 8.2 8.2 8.4 8.5 8.7 8.9 229.2 236.1 243.1 246.6 250.2 257.2 264.5 271.9 281.9 361.9 365.5 369.1 370.9 372.8 376.5 380.2 384.1 387.1 7.2 7.3 7.5 7.5 7.6 7.8 7.9 8.0 8.3 217.5 223.1 228.8 231.7 234.6 240.5 246.4 252.3 261.1 371.0 372.8 374.7 375.6 376.6 378.6 380.6 382.7 385.8 6.6 6.8 6.9 7.0 7.1 7.2 7.3 7.5 7.7 198.4 203.4 205.4 206.4 207.5 209.5 211.5 213.3 216.0 365.6 367.2 361.8 359.1 357.4 352.7 348.1 343.6 337.2 6.1 6.3 6.4 6.5 6.6 6.7 6.9 7.0 7.2 157.0 158.5 160.0 160.7 161.4 162.8 164.2 165.5 167.4 311.9 308.6 305.5 304.0 302.4 299.5 296.7 293.9 290.0 5.6 5.8 5.9 5.9 6.0 6.1 6.2 6.3 6.4 MODEL YCAS0250EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 219.9 227.7 235.6 239.6 243.7 251.8 260.0 268.4 280.9 279.3 284.0 288.6 291.0 293.3 298.0 302.8 307.6 315.2 8.8 8.9 9.1 9.2 9.3 9.4 9.6 9.8 10.0 213.0 220.8 228.6 232.5 236.4 244.3 252.4 260.6 272.9 297.6 302.8 307.8 310.4 312.9 318.0 323.2 328.4 336.6 MODEL YCAS0270EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 241.7 249.8 258.0 262.2 266.4 274.9 283.5 292.3 305.7 319.1 323.9 328.7 331.1 333.5 338.3 343.1 348.1 355.9 8.5 8.7 8.8 8.9 9.0 9.2 9.3 9.5 9.7 236.0 243.9 252.0 256.1 260.2 268.3 276.0 283.7 295.3 341.5 346.9 352.2 354.8 357.4 362.4 365.8 369.3 374.9 NOTES: 1. 2. 3. 4. 5. kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panel’s 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590. YORK INTERNATIONAL 23 Ratings – English Units AIR TEMPERATURE ON CONDENSER (°F) LCWT (°F) 75 TONS kW 80 EER TONS MODEL YCAS0300EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 309.2 319.5 330.2 335.7 340.8 352.4 363.6 374.8 391.9 246.0 249.9 254.0 256.0 257.8 261.9 265.8 269.6 275.2 13.7 13.9 14.2 14.3 14.4 14.7 15.0 15.3 15.6 299.0 309.3 319.7 324.8 330.2 340.5 351.8 362.8 379.4 MODEL YCAS0330EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 320.4 331.0 341.8 347.3 352.9 364.2 375.7 387.5 405.5 256.8 259.6 262.3 263.6 264.9 267.5 270.0 272.5 276.2 13.6 13.9 14.3 14.4 14.6 14.9 15.3 15.6 16.1 313.3 323.2 334.1 339.4 344.8 355.7 366.9 378.3 395.8 MODEL YCAS0360EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 374.8 387.4 400.5 407.0 413.5 426.8 440.1 453.7 474.2 307.2 312.4 317.8 320.3 322.9 328.0 333.0 338.0 345.5 13.4 13.6 13.9 14.0 14.1 14.3 14.6 14.8 15.2 362.5 374.9 387.5 393.8 400.2 413.0 426.0 439.2 459.2 kW 85 EER TONS 90 kW EER TONS 278.9 283.6 288.2 290.5 292.9 297.4 302.0 306.6 313.4 11.4 11.6 11.8 11.9 12.1 12.3 12.5 12.7 13.0 307.1 316.7 326.9 331.9 337.5 348.2 359.0 370.1 387.1 298.5 301.5 304.6 306.0 307.6 310.6 313.5 316.4 320.9 350.8 362.9 375.1 381.2 387.4 399.9 412.6 425.4 444.9 95 kW EER TONS kW EER 279.9 289.6 299.5 304.5 309.5 319.8 330.0 340.3 355.8 297.2 302.2 307.2 309.7 312.2 317.3 322.3 327.3 334.7 10.4 10.6 10.8 10.9 11.0 11.2 11.4 11.6 11.9 271.0 280.5 290.2 295.0 299.9 309.8 319.8 329.9 345.3 316.6 322.0 327.6 330.3 333.0 338.4 343.9 349.4 357.8 9.5 9.7 9.9 10.0 10.0 10.2 10.4 10.6 10.8 11.4 11.6 11.9 12.0 12.2 12.4 12.7 13.0 13.4 301.5 311.1 321.0 325.8 330.5 341.4 351.9 362.8 379.2 322.2 325.5 328.8 330.3 331.8 335.2 338.5 341.8 346.6 10.4 10.6 10.9 11.0 11.1 11.4 11.6 11.9 12.2 296.6 305.9 315.5 320.4 325.3 335.0 345.6 356.1 372.2 347.6 351.3 354.9 356.7 358.5 361.9 365.6 369.2 374.8 9.5 9.7 10.0 10.1 10.2 10.4 10.6 10.8 11.2 348.5 11.2 354.6 11.4 360.7 11.6 363.8 11.6 366.8 11.7 372.8 11.9 378.9 12.1 384.9 12.3 394.0 12.6 339.7 351.3 363.3 369.2 375.3 387.4 399.8 412.3 431.3 371.4 378.1 384.6 387.8 391.1 397.8 404.4 411.0 421.0 10.2 10.4 10.5 10.6 10.7 10.9 11.1 11.2 11.5 329.0 340.5 352.0 357.9 363.7 375.7 387.7 399.8 418.4 395.9 402.9 410.2 413.7 417.2 424.3 431.4 438.8 449.8 9.3 9.5 9.6 9.7 9.8 9.9 10.1 10.3 10.5 (IPLV = 14.2) 261.8 266.2 270.5 272.6 274.7 278.8 283.2 287.4 293.6 12.5 12.7 13.0 13.1 13.2 13.4 13.7 13.9 14.3 289.2 299.2 309.4 314.5 319.7 330.0 340.6 351.3 367.0 (IPLV = 14.6) 276.7 279.6 282.5 283.9 285.3 288.0 290.7 293.4 297.4 12.4 12.7 13.0 13.2 13.3 13.6 13.9 14.2 14.7 (IPLV = 14.6) 327.0 332.8 338.5 341.3 344.1 349.6 355.1 360.6 368.8 12.2 12.4 12.7 12.8 12.9 13.1 13.3 13.5 13.9 NOTES: 1. 2. 3. 4. 5. 24 kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panel’s 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590. YORK INTERNATIONAL FORM 201.18-EG1 AIR TEMPERATURE ON CONDENSER (°F) LCWT (°F) 100 TONS kW 105 EER TONS kW 110 EER TONS kW 115 EER TONS kW 120 EER TONS kW 125 EER TONS kW EER MODEL YCAS0300EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 262.6 271.9 281.3 286.0 290.8 300.4 310.2 320.1 335.2 337.5 343.3 349.3 352.2 355.1 361.0 367.0 373.0 382.2 8.7 8.8 9.0 9.1 9.2 9.3 9.5 9.6 9.9 254.6 263.7 272.9 277.5 282.2 291.6 301.1 310.8 325.6 359.7 366.0 372.2 375.4 378.5 385.1 391.6 398.1 408.2 7.9 8.1 8.2 8.3 8.4 8.5 8.7 8.8 9.0 247.1 255.9 264.9 269.5 274.1 283.3 292.6 302.0 314.7 383.2 389.9 396.7 400.1 403.5 410.5 417.7 424.6 431.3 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.1 8.3 240.1 248.7 256.8 260.2 263.7 270.7 277.7 284.8 295.2 407.9 415.3 420.8 421.8 422.9 425.7 428.3 431.1 435.3 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.5 7.7 224.1 230.6 237.1 240.4 243.7 249.1 251.2 253.6 256.6 410.8 413.8 417.3 419.0 420.7 421.3 414.7 410.0 401.9 6.2 6.3 6.4 6.5 6.6 6.7 6.8 7.0 7.2 188.9 190.8 192.7 193.7 194.5 196.3 197.9 199.6 201.8 371.3 367.0 362.8 360.8 358.8 355.1 351.5 348.1 343.3 5.7 5.8 6.0 6.0 6.1 6.2 6.3 6.4 6.6 8.1 8.2 8.4 8.5 8.6 8.7 8.9 9.1 9.4 282.9 290.7 298.6 302.7 306.7 315.0 323.6 332.1 342.4 430.1 433.0 435.9 437.4 438.9 441.8 444.7 447.5 445.9 7.5 7.6 7.8 7.9 7.9 8.1 8.3 8.4 8.7 271.7 276.7 281.8 284.4 287.0 292.3 297.6 302.7 310.6 444.5 442.4 440.4 439.3 438.3 436.3 434.3 432.3 429.0 6.9 7.1 7.3 7.3 7.4 7.6 7.8 7.9 8.2 244.0 247.9 250.1 251.3 252.3 254.2 256.4 258.6 261.8 424.8 422.4 416.4 413.4 410.4 404.1 398.3 392.6 383.9 6.5 6.6 6.8 6.9 6.9 7.1 7.3 7.4 7.7 193.1 194.7 196.4 197.2 198.0 199.6 201.2 202.5 204.6 362.6 358.6 354.6 352.6 350.6 346.6 342.7 338.4 332.4 6.0 6.1 6.2 6.3 6.3 6.4 6.6 6.7 6.9 7.7 7.9 8.0 8.1 8.2 8.3 8.4 8.6 8.7 300.1 310.8 321.7 327.2 332.8 344.1 355.2 366.7 381.0 479.5 488.1 496.9 501.3 505.8 514.9 524.3 533.7 540.5 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 8.0 291.5 302.1 312.4 315.7 319.1 326.1 332.8 339.6 349.6 510.7 520.0 528.3 527.7 527.2 527.6 527.5 527.7 528.1 6.5 6.6 6.7 6.8 6.9 7.0 7.2 7.3 7.5 265.9 271.3 274.1 275.6 277.0 279.6 282.1 284.6 288.0 498.9 497.5 490.3 487.0 484.4 478.3 472.4 466.8 458.7 6.0 6.2 6.3 6.4 6.5 6.6 6.8 6.9 7.1 209.6 211.7 213.6 214.6 215.5 217.3 219.1 220.7 223.1 421.2 416.9 412.8 410.9 409.0 405.4 401.9 398.7 394.2 5.6 5.7 5.8 5.9 5.9 6.0 6.1 6.2 6.3 MODEL YCAS0330EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 292.2 301.3 310.6 315.4 320.2 329.9 339.9 350.2 365.7 375.0 379.0 383.0 385.0 387.0 391.0 395.0 399.1 405.2 8.8 8.9 9.1 9.2 9.3 9.5 9.7 9.9 10.2 288.3 297.2 306.3 311.0 315.7 324.7 333.3 342.6 356.2 403.9 408.5 413.0 415.3 417.5 420.7 423.2 425.8 429.8 MODEL YCAS0360EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 318.8 330.0 341.4 347.0 352.8 364.4 376.3 388.0 406.3 422.1 429.6 437.1 441.2 445.0 452.7 460.5 468.2 480.7 8.5 8.6 8.8 8.9 8.9 9.1 9.2 9.4 9.6 309.2 320.1 331.3 336.9 342.5 353.8 365.4 377.1 394.8 450.1 458.1 466.2 470.3 474.4 483.0 491.4 500.0 513.4 NOTES: 1. 2. 3. 4. 5. kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panel’s 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590. YORK INTERNATIONAL 25 Ratings – English Units AIR TEMPERATURE ON CONDENSER (°F) LCWT (°F) 75 TONS kW 80 EER TONS MODEL YCAS0400EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 414.1 428.3 442.6 449.8 457.1 471.7 486.5 501.5 524.2 332.0 337.7 343.3 346.0 348.7 354.1 359.5 364.8 372.7 13.6 13.9 14.1 14.3 14.4 14.6 14.9 15.1 15.5 400.5 414.2 428.2 435.1 442.2 456.5 470.9 485.5 507.6 MODEL YCAS0440EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 426.4 440.4 454.7 462.0 469.3 484.2 499.5 515.0 538.8 347.8 351.7 355.5 357.4 359.2 362.8 366.4 369.9 375.2 13.5 13.8 14.1 14.2 14.4 14.7 15.0 15.4 15.9 417.2 430.7 444.6 451.7 458.8 473.2 488.0 503.1 526.2 kW 85 EER TONS 90 95 kW EER TONS kW EER TONS kW EER 376.3 383.0 389.5 392.7 395.9 402.3 408.6 415.1 424.7 11.4 11.6 11.8 11.9 12.0 12.2 12.4 12.6 12.9 374.9 388.0 401.2 407.8 414.5 428.1 441.8 455.6 476.7 401.2 408.2 415.2 418.6 422.1 429.1 436.0 443.1 453.7 10.4 10.6 10.8 10.8 10.9 11.1 11.3 11.5 11.8 363.3 375.5 388.7 395.2 401.7 414.9 428.3 441.8 462.4 427.5 435.0 442.6 446.4 450.2 457.7 465.3 473.0 484.7 9.5 9.6 9.8 9.9 10.0 10.2 10.3 10.5 10.7 404.6 409.0 413.3 415.4 417.5 421.7 425.9 430.1 436.4 11.2 11.5 11.7 11.9 12.0 12.2 12.5 12.8 13.2 401.7 414.5 427.5 434.2 440.9 454.5 468.5 482.7 504.6 436.8 441.5 446.2 448.5 450.8 455.4 460.0 464.6 471.7 10.3 10.5 10.7 10.8 10.9 11.2 11.4 11.7 12.0 395.4 407.7 420.4 426.9 433.4 446.7 460.3 474.1 495.5 471.4 476.6 481.7 484.2 486.8 491.9 497.0 502.2 510.1 9.4 9.6 9.8 9.9 10.0 10.2 10.4 10.6 11.0 (IPLV = 14.5) 353.4 359.5 365.5 368.5 371.4 377.3 383.2 389.0 397.7 12.4 12.7 12.9 13.0 13.1 13.4 13.6 13.8 14.2 387.0 400.8 414.3 421.2 428.1 441.9 455.9 470.2 491.8 (IPLV = 14.9) 375.0 379.1 383.1 385.1 387.0 390.9 394.7 398.5 404.3 12.3 12.6 12.8 13.0 13.1 13.4 13.7 14.0 14.5 409.0 422.1 435.6 442.4 449.3 463.3 477.7 492.3 514.8 NOTES: 1. 2. 3. 4. 5. 26 kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panel’s 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590. YORK INTERNATIONAL FORM 201.18-EG1 AIR TEMPERATURE ON CONDENSER (°F) LCWT (°F) 100 TONS kW 105 EER TONS kW 110 EER TONS kW 115 EER TONS kW 120 EER TONS kW 125 EER TONS kW EER MODEL YCAS0400EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 352.0 364.4 376.9 383.0 389.6 402.5 415.5 428.7 448.9 455.7 463.6 472.0 475.9 480.1 488.3 496.6 505.0 517.7 8.7 8.8 9.0 9.0 9.1 9.3 9.4 9.6 9.8 341.2 353.1 365.3 371.9 378.1 390.6 403.5 416.4 436.1 485.6 494.1 502.6 507.3 512.0 520.8 529.8 539.0 553.0 7.9 8.0 8.2 8.3 8.3 8.5 8.6 8.7 8.9 331.4 343.1 355.2 360.8 366.7 379.6 392.2 404.2 419.8 517.3 526.6 536.0 540.3 544.9 555.3 565.3 573.6 580.2 7.2 7.4 7.5 7.6 7.6 7.7 7.9 8.0 8.2 321.9 333.4 343.1 346.9 350.9 358.8 366.6 374.4 385.9 550.8 560.9 565.5 565.2 565.1 566.3 566.8 567.6 568.9 6.6 6.7 6.9 7.0 7.0 7.2 7.3 7.5 7.7 293.5 300.8 307.9 311.6 315.2 322.2 325.1 328.0 331.8 538.0 539.4 541.2 542.2 543.1 544.5 536.8 530.4 520.4 6.2 6.3 6.4 6.5 6.6 6.7 6.9 7.0 7.2 243.5 246.0 248.4 249.6 250.7 252.9 254.9 257.0 259.8 480.3 475.1 469.9 467.4 465.0 460.5 456.1 452.0 446.2 5.7 5.8 5.9 6.0 6.0 6.2 6.3 6.4 6.5 7.9 8.1 8.3 8.3 8.4 8.6 8.8 9.0 9.3 375.6 385.1 394.8 400.3 405.1 415.5 426.1 436.1 448.1 579.4 582.3 585.3 586.7 588.1 591.1 594.0 595.3 590.7 7.4 7.5 7.7 7.8 7.8 8.0 8.2 8.3 8.6 355.8 361.6 367.4 370.4 373.3 379.3 385.5 391.6 399.9 588.5 584.3 580.3 578.2 576.2 572.1 567.8 563.8 557.3 6.9 7.0 7.2 7.3 7.4 7.5 7.7 7.9 8.1 312.8 317.8 320.6 322.0 323.4 325.8 328.6 331.3 335.5 549.3 546.4 539.0 535.2 531.5 523.8 516.5 509.3 498.7 6.5 6.6 6.7 6.8 6.9 7.0 7.2 7.3 7.6 246.4 248.4 250.4 251.5 252.5 254.5 256.6 258.6 261.3 470.6 465.7 461.0 458.3 455.8 450.9 446.0 441.1 433.5 5.9 6.0 6.1 6.1 6.2 6.3 6.4 6.6 6.7 MODEL YCAS0440EC 40.0 42.0 44.0 45.0 46.0 48.0 50.0 52.0 55.0 389.6 401.7 414.1 420.4 427.0 439.7 453.0 466.5 487.3 508.6 514.3 520.1 522.9 525.7 531.4 537.1 542.9 551.9 8.6 8.8 9.0 9.1 9.2 9.4 9.5 9.7 10.0 383.6 396.4 408.6 414.6 420.9 431.9 443.0 454.4 471.8 547.0 554.4 560.8 564.0 567.2 570.0 572.5 575.1 579.1 NOTES: 1. 2. 3. 4. 5. kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panel’s 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590. YORK INTERNATIONAL 27 Ratings – SI Units AIR TEMPERATURE – CONDENSER (°C) LCWT 25 (°C) kWo 30 kWE COP kWo 35 kWE COP 40 45 50 kWo kWE COP kWo kWE COP kWo kWE COP kWo kWE COP 3.2 3.3 3.3 3.4 3.5 3.6 3.7 3.8 3.9 276.7 285.6 294.7 303.9 313.0 322.4 331.9 341.5 351.3 91.8 92.3 92.8 93.4 94.1 94.6 95.2 95.9 96.6 2.7 2.8 2.8 2.9 3.0 3.1 3.1 3.2 3.3 260.6 269.0 277.6 286.4 295.2 304.2 313.4 322.4 331.7 103.0 103.6 104.2 104.9 105.6 106.3 107.1 108.0 108.9 2.3 2.4 2.4 2.5 2.5 2.6 2.7 2.7 2.8 245.9 254.0 262.3 270.6 279.1 287.7 296.4 305.3 314.2 115.7 116.4 117.1 117.9 118.8 119.6 120.6 121.5 122.6 1.9 2.0 2.1 2.1 2.2 2.2 2.3 2.3 2.4 232.7 240.6 248.5 256.6 264.7 273.0 281.4 289.9 298.5 129.8 130.7 131.5 132.5 133.5 134.5 135.6 136.8 138.0 1.7 1.7 1.8 1.8 1.8 1.9 1.9 2.0 2.0 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 298.2 307.0 315.9 325.1 334.5 344.1 354.0 364.0 374.3 98.8 98.7 98.8 98.7 98.7 98.6 98.7 98.7 98.8 2.7 2.8 2.9 3.0 3.1 3.1 3.2 3.3 3.4 289.9 298.2 306.7 315.5 324.3 333.4 342.7 352.3 362.1 113.4 113.3 113.2 113.2 113.4 113.4 113.5 113.6 113.8 2.3 2.4 2.5 2.5 2.6 2.7 2.8 2.8 2.9 283.4 291.3 299.5 307.9 316.4 325.1 333.9 343.0 352.3 129.7 129.7 129.7 129.7 129.8 130.0 130.4 130.6 131.0 2.0 2.1 2.1 2.2 2.3 2.3 2.4 2.4 2.5 278.0 285.7 293.7 300.6 302.3 305.2 308.6 311.2 313.5 147.6 147.7 147.9 147.6 145.1 143.1 141.6 139.7 137.8 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.1 2.1 3.1 3.1 3.2 3.3 3.3 3.4 3.5 3.6 3.7 344.2 354.7 365.3 376.1 387.1 398.5 410.3 422.0 433.9 116.0 117.0 118.0 119.0 119.9 120.9 121.8 122.8 123.8 2.6 2.7 2.7 2.8 2.8 2.9 3.0 3.0 3.1 328.8 338.8 348.9 359.3 369.9 380.8 391.8 402.9 414.3 131.7 132.9 134.0 135.2 136.3 137.4 138.6 139.7 141.0 2.2 2.3 2.3 2.4 2.4 2.5 2.5 2.6 2.6 315.5 325.1 334.9 344.9 355.1 365.5 376.0 386.7 397.6 149.4 150.8 152.1 153.4 154.7 156.1 157.5 159.0 160.5 1.9 2.0 2.0 2.0 2.1 2.1 2.2 2.2 2.3 290.6 295.5 300.5 305.6 310.7 315.8 320.9 325.0 327.0 161.9 161.4 160.9 160.5 160.2 159.9 159.7 159.0 157.6 1.6 1.7 1.7 1.7 1.8 1.8 1.8 1.9 1.9 MODEL YCAS0090EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 313.3 323.1 333.4 343.6 354.0 364.5 375.1 385.9 396.8 73.4 73.8 74.1 74.5 74.8 75.2 75.5 75.8 76.2 3.7 3.8 3.9 4.0 4.1 4.2 4.4 4.5 4.6 294.4 303.6 313.2 322.8 332.6 342.5 352.7 362.8 373.1 81.9 82.4 82.9 83.3 83.8 84.2 84.7 85.2 85.7 MODEL YCAS0100EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 322.1 332.0 342.0 352.6 363.3 374.2 385.2 396.6 408.1 75.4 75.4 75.4 75.4 75.4 75.3 75.3 75.3 75.4 3.7 3.9 4.0 4.1 4.2 4.3 4.5 4.6 4.7 308.6 318.0 327.6 337.4 347.5 357.6 368.1 378.7 389.6 86.3 86.2 86.2 86.1 86.0 86.0 86.0 86.0 86.0 MODEL YCAS0110EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 382.2 393.9 406.0 417.8 430.6 443.3 456.2 469.2 482.5 90.3 91.1 91.9 92.7 93.4 94.1 94.8 95.4 96.1 3.6 3.7 3.8 3.8 3.9 4.0 4.1 4.2 4.3 361.9 373.0 384.2 395.6 407.2 419.5 431.7 444.1 456.7 102.2 103.1 104.0 104.8 105.7 106.5 107.3 108.1 108.9 NOTES: 1. 2. 3. 4. 5. 28 kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panel’s 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590. YORK INTERNATIONAL FORM 201.18-EG1 AIR TEMPERATURE – CONDENSER (°C) LCWT (°C) 25 kWo 30 kWE COP kWo 35 kWE COP kWo 40 kWE COP kWo 45 kWE COP kWo 50 kWE COP kWo kWE COP MODEL YCAS0120EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 391.8 403.5 415.7 428.1 440.3 453.1 466.9 480.3 493.9 92.9 93.5 93.9 94.4 94.8 95.2 95.6 96.0 96.4 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 375.9 387.0 398.3 409.8 421.6 433.7 446.5 459.2 472.1 106.6 107.2 107.7 108.1 108.6 109.0 109.5 109.9 110.4 3.1 3.1 3.2 3.3 3.4 3.5 3.6 3.6 3.7 363.2 373.7 384.4 395.3 406.5 417.9 429.9 441.9 454.1 122.6 123.2 123.8 124.3 124.9 125.4 126.0 126.6 127.2 2.6 2.7 2.8 2.8 2.9 3.0 3.0 3.1 3.2 353.3 363.3 373.4 383.8 394.4 405.2 416.3 427.7 439.6 140.9 141.6 142.3 143.0 143.7 144.4 145.1 145.9 146.8 2.3 2.3 2.4 2.4 2.5 2.5 2.6 2.6 2.7 345.3 354.8 364.6 374.5 384.7 395.2 405.8 414.6 420.7 161.3 162.2 163.1 164.1 165.0 166.0 167.0 167.0 165.9 2.0 2.0 2.0 2.1 2.1 2.2 2.2 2.3 2.3 292.6 297.4 302.4 307.4 312.4 317.6 322.8 327.1 329.2 162.4 161.8 161.3 160.8 160.3 159.8 159.4 158.5 156.8 1.6 1.7 1.7 1.7 1.8 1.8 1.8 1.9 1.9 3.4 3.4 3.5 3.6 3.7 3.7 3.8 3.9 3.9 403.5 416.3 429.4 442.5 455.9 469.4 483.2 497.3 511.5 126.3 128.0 129.7 131.3 133.0 134.6 136.2 137.8 139.2 2.9 2.9 3.0 3.0 3.1 3.2 3.2 3.3 3.3 380.4 392.7 405.0 417.5 430.3 443.2 456.3 469.8 483.4 142.0 143.9 145.9 147.8 149.7 151.7 153.5 155.3 157.1 2.4 2.5 2.5 2.6 2.6 2.7 2.7 2.8 2.8 359.0 371.3 383.1 395.1 407.3 419.7 432.3 445.2 458.2 159.5 161.8 164.0 166.2 168.5 170.7 172.8 175.0 177.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 2.4 2.4 340.7 352.0 363.5 375.0 386.9 398.9 411.1 423.5 436.0 179.0 181.6 184.1 186.7 189.2 191.7 194.2 196.7 199.3 1.8 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.0 3.4 3.5 3.6 3.6 3.7 3.8 3.9 4.0 4.1 435.6 448.2 461.2 474.4 487.9 501.9 516.1 530.6 545.7 135.7 136.7 137.6 138.6 139.4 140.2 141.0 141.7 142.4 2.9 3.0 3.0 3.1 3.2 3.2 3.3 3.4 3.5 422.9 434.9 447.1 459.7 472.6 485.8 499.2 513.1 527.1 155.7 156.9 158.0 159.1 160.1 161.0 162.0 162.9 163.8 2.5 2.5 2.6 2.7 2.7 2.8 2.8 2.9 3.0 412.6 178.2 424.2 179.6 436.0 180.9 448.0 182.2 460.3 183.4 472.9 184.6 485.8 185.9 498.9 187.1 512.3 188.3 2.1 2.2 2.2 2.3 2.3 2.4 2.4 2.5 2.5 404.1 415.3 426.7 434.6 437.2 441.2 444.2 447.3 450.3 202.7 204.4 206.1 206.2 204.0 202.1 200.5 198.5 196.6 1.9 1.9 1.9 2.0 2.0 2.0 2.1 2.1 2.1 MODEL YCAS0130EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 456.4 470.7 485.3 500.0 514.9 530.0 545.3 560.9 576.4 100.3 101.7 102.9 104.1 105.3 106.5 107.5 108.5 109.6 4.0 4.1 4.1 4.2 4.3 4.4 4.5 4.6 4.6 428.7 442.3 456.1 470.1 484.1 498.4 512.9 527.6 542.6 112.5 113.9 115.4 116.8 118.2 119.6 120.9 122.2 123.4 MODEL YCAS0140EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 471.4 485.8 500.4 515.6 530.6 546.4 562.3 578.5 595.0 103.3 104.1 104.9 105.7 106.4 107.0 107.6 108.2 108.8 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 451.6 465.0 478.8 492.8 507.1 521.9 536.9 552.7 568.1 118.2 119.1 120.0 120.8 121.6 122.2 122.9 123.5 124.1 NOTES: 1. 2. 3. 4. 5. kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panel’s 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590. YORK INTERNATIONAL 29 Ratings – SI Units AIR TEMPERATURE – CONDENSER (°C) LCWT 25 (°C) kWo 30 kWE COP kWo 35 kWE COP kWo 40 kWE COP 45 kWo kWE COP kWo 50 kWE COP kWo kWE COP MODEL YCAS0150EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 537.4 554.0 570.7 587.7 605.0 622.6 640.4 658.4 676.8 122.3 123.7 125.0 126.4 127.7 128.9 130.2 131.4 132.6 3.9 4.0 4.1 4.2 4.3 4.3 4.4 4.5 4.6 509.9 525.4 541.3 557.1 573.6 590.3 607.2 624.4 641.7 138.2 139.7 141.3 142.9 144.4 145.8 147.2 148.7 150.1 3.3 3.4 3.5 3.5 3.6 3.7 3.8 3.8 3.9 485.6 500.3 515.3 530.7 546.2 561.1 577.9 594.2 610.8 156.6 158.3 160.1 161.9 163.6 165.1 167.1 168.8 170.5 2.8 2.9 3.0 3.0 3.1 3.1 3.2 3.2 3.3 464.4 478.5 492.8 507.5 522.3 537.3 552.4 568.3 583.9 177.4 179.5 181.5 183.6 185.6 187.6 189.6 191.6 193.8 2.4 2.5 2.5 2.6 2.6 2.7 2.7 2.8 2.8 446.1 459.7 473.4 487.3 501.7 516.1 530.8 545.3 560.6 200.8 203.1 205.5 207.9 210.3 212.7 215.1 217.4 220.0 2.1 2.1 2.2 2.2 2.2 2.3 2.3 2.4 2.4 412.3 419.5 425.5 428.1 430.9 434.1 436.8 439.5 442.0 217.9 218.1 217.7 215.9 214.3 213.0 211.5 210.0 208.6 1.8 1.8 1.8 1.9 1.9 1.9 1.9 2.0 2.0 3.2 3.3 3.4 3.4 3.5 3.5 3.6 3.6 3.7 524.3 540.8 557.5 574.4 589.5 608.7 625.7 643.3 661.1 176.5 179.2 181.8 184.4 186.7 189.6 192.5 195.2 197.9 2.7 2.8 2.8 2.9 2.9 3.0 3.0 3.1 3.1 495.5 511.3 527.3 543.4 559.7 576.2 593.0 608.0 626.6 198.1 201.1 204.2 207.2 210.2 213.3 216.4 219.2 222.9 2.3 2.4 2.4 2.5 2.5 2.5 2.6 2.6 2.6 469.6 484.7 500.1 515.6 531.4 547.3 563.4 579.7 596.2 222.1 225.5 229.0 232.5 236.0 239.6 243.2 246.9 250.6 2.0 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.3 410.9 413.8 416.6 419.2 421.8 424.2 426.6 428.8 430.9 231.7 230.3 229.0 227.7 226.5 225.4 224.3 223.3 222.4 1.7 1.7 1.7 1.7 1.8 1.8 1.8 1.8 1.8 3.2 3.3 3.4 3.4 3.5 3.6 3.6 3.7 3.8 549.8 566.2 582.9 599.7 616.9 634.1 652.1 670.0 688.2 184.6 186.8 188.9 191.2 193.3 195.6 197.8 199.9 202.2 2.8 2.8 2.9 2.9 3.0 3.0 3.1 3.1 3.2 527.6 543.7 559.6 575.8 592.2 608.9 625.9 643.1 660.5 209.4 212.0 214.5 217.0 219.6 222.3 224.9 227.6 230.4 2.4 2.4 2.4 2.5 2.5 2.6 2.6 2.7 2.7 508.8 524.0 539.3 554.2 570.8 586.8 602.7 611.8 621.9 237.2 240.1 243.1 246.0 249.2 252.4 255.2 255.3 255.6 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 413.7 416.4 419.1 421.8 424.3 426.8 429.3 431.6 433.5 232.1 230.7 229.2 227.8 226.4 225.0 223.7 222.4 221.0 1.7 1.7 1.7 1.7 1.8 1.8 1.8 1.8 1.8 MODEL YCAS0160EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 590.5 608.6 627.0 645.5 664.3 683.3 702.4 721.8 741.3 140.5 142.5 144.5 146.4 148.4 150.3 152.1 154.0 155.9 3.8 3.9 3.9 4.0 4.1 4.2 4.2 4.3 4.4 554.6 573.5 590.7 608.2 626.0 644.1 662.3 680.8 699.3 157.1 159.6 161.9 164.3 166.6 168.8 171.1 173.3 175.5 MODEL YCAS0170EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 603.6 621.7 640.3 659.0 678.1 697.3 717.1 736.8 757.1 143.6 145.3 146.9 148.5 150.1 151.6 153.1 154.6 156.2 3.8 3.9 4.0 4.0 4.1 4.2 4.3 4.4 4.4 574.2 592.1 609.5 627.2 645.3 663.7 682.3 701.2 720.3 162.5 164.6 166.5 168.4 170.2 172.0 173.8 175.6 177.5 NOTES: 1. 2. 3. 4. 5. 30 kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panel’s 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590. YORK INTERNATIONAL FORM 201.18-EG1 AIR TEMPERATURE – CONDENSER (°C) LCWT (°C) 25 kWo 30 kWE COP kWo 35 kWE COP kWo 40 kWE COP 45 kWo kWE COP kWo 50 kWE COP kWo kWE COP MODEL YCAS0180EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 616.7 634.9 653.6 672.5 691.9 711.6 731.7 752.1 772.9 146.7 148.0 149.3 150.5 151.8 153.0 154.1 155.3 156.5 3.8 3.9 4.0 4.1 4.2 4.3 4.3 4.4 4.5 593.8 610.8 628.4 646.3 664.6 683.3 702.3 721.6 741.3 167.9 169.6 171.0 172.4 173.8 175.2 176.6 178.0 179.4 3.3 3.3 3.4 3.5 3.5 3.6 3.7 3.8 3.8 575.3 591.6 608.3 625.1 642.4 660.1 678.2 696.6 715.4 192.6 194.3 196.0 197.9 199.6 201.3 203.0 204.7 206.4 2.8 2.8 2.9 2.9 3.0 3.1 3.1 3.2 3.2 560.4 574.6 591.9 608.2 624.7 641.5 658.8 676.4 694.3 220.8 222.6 224.9 226.9 229.0 231.3 233.4 235.6 237.8 2.4 2.4 2.5 2.5 2.6 2.6 2.7 2.7 2.8 548.1 563.1 578.5 594.2 610.2 626.5 641.7 643.7 647.5 252.2 254.6 257.2 259.8 262.4 265.2 267.1 263.5 260.4 2.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 2.4 416.5 419.1 421.6 424.2 426.8 429.3 432.1 434.5 436.0 232.6 231.0 229.5 227.9 226.3 224.6 223.1 221.4 219.6 1.7 1.7 1.7 1.8 1.8 1.8 1.8 1.8 1.9 3.3 3.3 3.4 3.4 3.5 3.6 3.6 3.7 3.7 623.1 642.7 662.5 682.3 702.9 723.4 744.2 765.2 786.4 206.8 209.8 212.7 215.7 218.7 221.7 224.7 227.7 230.7 2.8 2.8 2.9 2.9 3.0 3.0 3.1 3.1 3.2 588.9 607.6 626.6 645.8 665.3 685.0 704.8 725.0 745.3 231.9 235.4 238.8 242.2 245.7 249.2 252.7 256.2 259.8 2.4 2.4 2.4 2.5 2.5 2.6 2.6 2.6 2.7 558.3 576.1 594.3 612.8 631.5 650.4 669.7 688.9 708.5 259.7 263.8 267.8 271.8 275.8 279.8 284.0 288.1 292.3 2.0 2.0 2.1 2.1 2.2 2.2 2.2 2.3 2.3 530.4 540.2 543.9 546.0 549.2 552.0 554.9 557.6 560.2 290.7 291.3 289.0 287.0 285.1 283.2 281.5 279.9 278.3 1.7 1.8 1.8 1.8 1.8 1.8 1.9 1.9 1.9 3.3 3.3 3.4 3.5 3.5 3.6 3.7 3.7 3.8 651.9 671.3 691.0 711.3 731.8 752.6 773.6 795.1 816.9 215.6 218.1 220.5 222.9 225.3 227.8 230.2 232.6 235.1 2.8 2.8 2.9 3.0 3.0 3.1 3.1 3.2 3.2 625.8 644.4 663.3 682.6 702.2 722.1 742.3 762.8 783.5 244.5 247.3 250.2 253.0 255.9 258.8 261.7 264.6 267.6 2.4 2.4 2.5 2.5 2.6 2.6 2.7 2.7 2.7 603.1 276.5 620.9 280.0 639.1 283.4 655.6 285.9 671.1 287.9 686.9 289.9 702.9 292.0 719.2 294.1 735.1 296.2 2.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 2.3 538.0 543.5 546.9 549.4 552.5 555.0 558.1 561.1 564.1 291.6 290.5 288.2 286.0 283.9 281.7 279.7 277.8 275.9 1.7 1.8 1.8 1.8 1.8 1.9 1.9 1.9 1.9 MODEL YCAS0200EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 701.4 723.0 744.9 767.1 789.4 812.1 834.9 857.9 881.2 164.6 167.0 169.2 171.5 173.7 175.9 178.0 180.1 182.2 3.8 3.9 4.0 4.1 4.1 4.2 4.3 4.3 4.4 660.6 681.2 702.0 723.0 744.3 765.8 787.6 809.5 831.8 184.4 187.0 189.6 192.2 194.8 197.3 199.8 202.4 204.9 MODEL YCAS0210EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 716.0 737.8 759.7 782.1 804.8 827.8 851.1 874.8 898.8 167.9 169.8 171.7 173.6 175.3 177.1 178.8 180.6 182.2 3.9 3.9 4.0 4.1 4.2 4.2 4.3 4.4 4.5 681.8 702.2 723.1 744.3 765.8 787.7 809.9 832.4 855.2 190.1 192.3 194.4 196.5 198.5 200.6 202.6 204.6 206.7 NOTES: 1. 2. 3. 4. 5. kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panel’s 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590. YORK INTERNATIONAL 31 Ratings – SI Units AIR TEMPERATURE – CONDENSER (°C) LCWT (°C) 25 kWo 30 kWE COP kWo 35 kWE COP 40 kWo kWE COP 701.0 721.1 741.4 762.2 783.5 805.2 827.3 849.9 872.9 224.5 226.4 228.3 230.1 232.0 233.8 235.6 237.5 239.4 2.9 3.0 3.0 3.1 3.1 3.2 3.3 3.3 3.4 3.9 860.8 235.2 3.4 811.9 4.0 887.6 238.6 3.4 837.4 4.1 914.6 242.0 3.5 863.1 4.2 941.4 245.7 3.5 889.3 4.2 969.0 249.1 3.6 915.7 4.3 997.0 252.4 3.6 942.4 4.4 1025.2 255.8 3.7 968.8 4.4 1053.7 259.1 3.8 996.1 4.5 1082.5 262.5 3.8 1023.6 264.0 267.9 271.8 275.7 279.6 283.5 287.8 291.8 295.9 2.8 2.9 2.9 3.0 3.0 3.1 3.1 3.2 3.2 299.9 303.8 307.8 311.7 315.7 319.7 323.9 327.9 332.1 kWo 45 kWo 50 kWE COP kWE COP kWo kWE COP 682.6 701.7 721.1 741.0 761.3 782.0 803.2 824.7 846.6 257.0 259.3 261.6 263.8 266.1 268.4 270.6 272.9 275.3 2.5 2.5 2.6 2.6 2.7 2.7 2.8 2.8 2.9 667.4 293.4 685.7 296.2 704.5 299.0 719.4 300.0 732.1 300.0 745.1 300.0 758.3 300.0 771.7 300.0 784.5 300.0 2.1 2.2 2.2 2.3 2.3 2.3 2.4 2.4 2.5 561.9 563.1 566.4 569.4 572.6 574.7 578.2 581.6 585.1 292.5 289.7 287.4 285.1 282.8 280.2 278.0 275.7 273.4 1.8 1.8 1.9 1.9 1.9 1.9 2.0 2.0 2.0 767.4 791.8 816.4 841.4 866.8 892.4 918.2 944.4 970.4 296.3 300.8 305.3 309.8 314.3 318.9 323.5 328.2 333.3 2.4 2.5 2.5 2.5 2.6 2.6 2.7 2.7 2.7 727.3 332.2 750.8 337.3 774.6 342.5 798.6 347.7 823.0 352.9 847.7 358.3 872.7 363.6 897.9 369.1 923.4 374.7 2.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 2.3 646.0 652.7 659.1 665.2 671.2 676.9 682.4 687.7 692.7 341.8 337.6 333.6 329.8 326.1 322.5 319.1 315.8 312.6 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.0 2.1 2.8 847.4 339.5 2.8 872.8 344.2 2.9 898.4 348.8 2.9 924.6 353.4 2.9 951.1 358.1 3.0 977.9 362.8 3.0 1002.7 366.0 3.1 1027.5 369.2 3.1 1052.3 372.6 2.4 2.4 2.4 2.5 2.5 2.5 2.6 2.6 2.7 796.8 818.2 837.9 856.6 875.5 893.5 912.6 931.9 951.3 2.0 2.1 2.1 2.1 2.2 2.2 2.3 2.3 2.3 648.9 655.0 660.9 666.6 672.2 677.6 682.9 687.9 692.8 345.2 341.3 337.5 333.8 330.2 326.7 323.4 320.1 316.9 1.8 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.1 MODEL YCAS0230EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 752.6 775.0 797.8 821.0 844.8 868.9 893.4 918.5 943.9 171.2 172.7 174.2 175.6 177.0 178.4 179.7 181.0 182.3 4.0 4.1 4.2 4.2 4.3 4.4 4.5 4.6 4.7 724.0 745.1 766.6 788.5 811.0 833.9 857.2 881.0 905.1 195.9 197.5 199.1 200.7 202.3 203.8 205.4 206.9 208.4 3.4 3.5 3.5 3.6 3.7 3.8 3.8 3.9 4.0 MODEL YCAS0250EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 913.8 941.7 970.1 998.9 1027.9 1057.4 1086.9 1116.8 1147.0 210.0 213.1 216.0 219.0 221.9 224.7 227.5 230.3 233.1 MODEL YCAS0270EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 975.1 1004.1 1033.8 1063.9 1094.3 1125.1 1156.3 1187.9 1219.8 234.0 237.0 240.0 242.9 245.8 248.6 251.4 254.3 257.1 3.8 3.9 4.0 4.0 4.1 4.2 4.2 4.3 4.4 927.6 955.4 983.5 1011.6 1040.5 1069.9 1099.6 1129.7 1160.1 264.7 268.1 271.5 275.1 278.4 281.8 285.2 288.5 291.9 3.2 3.3 3.4 3.4 3.5 3.5 3.6 3.6 3.7 885.2 911.6 938.4 965.6 993.2 1021.3 1049.3 1078.1 1107.4 371.8 375.2 377.4 378.8 380.2 381.4 382.9 384.6 386.3 NOTES: 1. 2. 3. 4. 5. 32 kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panel’s 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590. YORK INTERNATIONAL FORM 201.18-EG1 AIR TEMPERATURE – CONDENSER (°C) LCWT 25 (°C) kWo 30 kWE COP kWo 35 kWE COP kWo 40 kWE COP 45 kWo kWE COP kWo 50 kWE COP kWo kWE COP MODEL YCAS0300EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 1090.8 1122.7 1157.7 1190.3 1224.7 1261.1 1296.3 1331.8 1367.6 254.2 257.8 261.7 265.1 268.7 272.5 276.1 279.6 283.1 3.9 4.0 4.0 4.1 4.2 4.2 4.3 4.4 4.4 1027.3 1059.0 1091.0 1123.4 1156.4 1189.4 1223.1 1256.9 1291.1 284.7 289.0 293.3 297.5 301.7 305.9 310.1 314.3 318.5 3.3 3.4 3.4 3.5 3.5 3.6 3.7 3.7 3.8 969.3 999.3 1030.0 1060.9 1092.3 1124.0 1156.0 1188.5 1221.1 319.2 324.2 329.1 334.0 338.9 343.8 348.7 353.7 358.8 2.8 2.9 2.9 3.0 3.0 3.1 3.1 3.1 3.2 916.3 945.2 974.6 1004.2 1034.2 1064.8 1095.4 1126.7 1157.9 358.1 363.6 369.2 375.0 380.7 386.4 392.2 398.1 404.0 2.4 2.4 2.5 2.5 2.6 2.6 2.6 2.7 2.7 868.5 896.4 924.7 953.3 981.8 1005.1 1026.8 1049.8 1072.5 401.3 407.6 414.1 420.5 426.7 429.0 430.9 433.2 435.5 2.0 2.1 2.1 2.1 2.2 2.2 2.3 2.3 2.3 771.8 783.3 790.5 796.0 802.7 808.9 814.9 820.8 826.1 411.1 408.2 402.8 398.1 393.4 388.9 384.6 380.6 376.5 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.0 2.1 3.3 3.4 3.4 3.5 3.6 3.7 3.7 3.8 3.9 1058.7 1088.6 1119.2 1150.3 1180.9 1214.7 1247.8 1281.6 1315.9 349.4 352.6 355.9 359.1 362.1 365.5 368.8 372.1 375.4 2.8 2.9 2.9 3.0 3.1 3.1 3.2 3.2 3.3 1031.7 1060.2 1089.4 1119.3 1149.7 1179.3 1206.8 1236.1 1265.5 400.2 404.2 408.1 412.0 416.0 419.0 421.3 423.6 426.0 2.4 2.5 2.5 2.6 2.6 2.7 2.7 2.8 2.8 990.2 444.1 2.1 1014.3 446.6 2.2 1035.9 447.4 2.2 1053.6 445.6 2.2 1070.0 443.2 2.3 1087.6 441.2 2.3 1105.3 439.1 2.4 1123.5 437.1 2.4 1141.7 435.2 2.5 795.7 800.0 806.3 812.1 817.1 823.4 829.6 835.7 841.9 399.2 393.8 389.2 384.4 379.4 374.9 370.5 366.1 361.5 1.9 1.9 2.0 2.0 2.0 2.1 2.1 2.1 2.2 3.2 3.3 3.3 3.4 3.4 3.5 3.5 3.6 3.6 1176.4 1212.5 1249.4 1286.7 1324.5 1362.7 1401.0 1439.9 1479.3 399.3 405.8 412.1 418.5 424.8 431.3 438.0 444.6 451.2 2.8 2.8 2.8 2.9 2.9 3.0 3.0 3.0 3.1 1112.6 1147.6 1183.1 1218.6 1255.0 1291.7 1328.8 1366.3 1403.8 448.2 455.3 462.5 470.1 477.5 484.9 492.5 500.2 508.3 2.3 2.4 2.4 2.4 2.5 2.5 2.6 2.6 2.6 1055.2 502.3 2.0 866.0 467.0 1.8 1087.5 510.1 2.0 874.1 461.9 1.8 1123.2 518.7 2.1 882.0 456.9 1.8 1157.9 527.2 2.1 889.6 452.1 1.9 1193.0 535.7 2.1 897.1 447.4 1.9 1219.1 537.5 2.2 904.1 443.1 1.9 1239.9 536.1 2.2 910.9 438.9 2.0 1261.6 536.5 2.2 917.6 435.0 2.0 1283.1 536.2 2.3 923.6 431.1 2.0 MODEL YCAS0330EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 1133.2 1167.6 1201.7 1236.4 1271.9 1307.8 1344.6 1379.0 1419.8 265.9 268.5 270.9 273.3 275.7 278.0 280.3 282.4 284.9 3.9 4.0 4.1 4.1 4.2 4.3 4.4 4.5 4.6 1092.3 1123.2 1154.3 1189.0 1222.4 1256.6 1291.4 1326.8 1362.9 304.6 307.4 310.0 312.9 315.6 318.3 321.0 323.7 326.4 MODEL YCAS0360EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 1321.9 1362.1 1402.3 1443.6 1485.1 1526.9 1569.2 1611.7 1654.8 317.7 322.6 327.3 332.1 336.9 341.6 346.2 350.9 355.6 3.8 3.9 3.9 4.0 4.1 4.1 4.2 4.2 4.3 1245.9 1284.4 1322.7 1361.5 1401.0 1440.9 1481.3 1522.0 1563.0 356.0 361.6 367.1 372.7 378.2 383.7 389.2 394.8 400.4 NOTES: 1. 2. 3. 4. 5. kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panel’s 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590. YORK INTERNATIONAL 33 Ratings – SI Units AIR TEMPERATURE – CONDENSER (°C) LCWT (°C) 25 kWo 30 kWE COP kWo 35 kWE COP kWo 40 45 kWE COP kWo kWE COP kWo 431.1 438.0 444.8 451.2 458.4 465.2 472.1 479.1 486.1 1227.2 1264.8 1306.3 1345.6 1385.7 1426.4 1467.5 1509.0 1550.9 483.4 490.7 498.9 507.0 514.9 522.9 530.9 539.1 547.4 2.4 2.4 2.5 2.5 2.5 2.6 2.6 2.6 2.7 1164.9 1201.9 1239.8 1278.1 1314.2 1339.7 1363.5 1388.8 1413.6 50 kWE COP kWo kWE COP 541.7 550.7 559.5 568.5 575.7 575.2 575.2 575.5 575.8 529.3 527.2 520.8 514.8 509.1 503.5 498.4 493.3 488.4 MODEL YCAS0400EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 1460.5 1505.0 1550.0 1595.5 1641.4 1687.8 1734.6 1781.9 1829.6 343.2 348.4 353.5 358.6 363.7 368.6 373.6 378.5 383.5 3.9 4.0 4.0 4.1 4.1 4.2 4.3 4.3 4.4 1372.3 1418.3 1461.2 1504.5 1548.3 1592.5 1637.2 1682.3 1727.9 383.9 390.4 396.3 402.2 408.0 413.9 419.7 425.6 431.6 3.3 3.4 3.4 3.5 3.5 3.6 3.6 3.7 3.7 1299.0 1338.6 1379.8 1419.3 1463.0 1505.3 1548.1 1591.3 1634.8 2.8 2.8 2.9 2.9 3.0 3.0 3.1 3.1 3.2 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.3 2.3 995.4 1011.7 1021.2 1028.5 1037.0 1044.9 1052.9 1060.2 1067.0 1.8 1.8 1.9 1.9 1.9 2.0 2.0 2.0 2.1 NOTES: 1. 2. 3. 4. 5. 34 kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panel’s 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590. YORK INTERNATIONAL FORM 201.18-EG1 AIR TEMPERATURE – CONDENSER (°C) LCWT 25 (°C) kWo 30 kWE COP kWo 35 kWE COP kWo 40 kWE COP 45 kWo kWE COP kWo 1375.9 1413.8 1452.6 1492.2 1532.3 1569.0 1605.3 1642.0 1679.7 543.0 548.6 554.2 559.8 565.4 568.4 570.7 573.0 575.3 2.4 2.4 2.5 2.5 2.6 2.6 2.7 2.7 2.8 1306.7 1334.7 1358.8 1380.3 1398.2 1418.2 1438.3 1458.7 1479.3 50 kWE COP kWo kWE COP MODEL YCAS0440EC 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 1509.5 1553.6 1598.6 1644.5 1691.3 1738.9 1787.3 1836.6 1886.7 360.3 363.9 367.3 370.7 374.0 377.3 380.6 383.9 387.1 3.8 3.9 4.0 4.1 4.2 4.2 4.3 4.4 4.5 1454.9 1496.7 1539.3 1582.7 1627.3 1672.2 1718.2 1765.1 1812.8 413.0 417.0 420.9 424.7 428.6 432.4 436.2 440.1 444.0 3.3 3.3 3.4 3.5 3.5 3.6 3.7 3.7 3.8 1411.4 1450.9 1491.7 1532.6 1574.8 1617.8 1661.7 1706.3 1751.7 473.9 478.5 483.2 487.7 492.3 496.9 501.6 506.3 511.1 2.8 2.8 2.9 3.0 3.0 3.1 3.1 3.2 3.2 593.4 594.7 593.4 590.3 585.5 581.5 577.4 573.4 569.5 2.1 2.1 2.2 2.2 2.3 2.3 2.4 2.4 2.5 1017.9 1023.9 1031.7 1039.2 1045.9 1053.8 1061.6 1069.4 1077.1 516.8 510.3 504.5 498.7 492.6 486.9 481.3 475.8 470.3 1.9 1.9 1.9 2.0 2.0 2.0 2.1 2.1 2.1 NOTES: 1. 2. 3. 4. 5. kW = Compressor Input Power EER = Chiller EER (includes power from compressors, fans, and control panel’s 0.8 KW) LCWT = Leaving Chilled Water Temperature Ratings based on 2.4 GPM cooler water per ton Rated in accordance with ARI Standard 550/590. YORK INTERNATIONAL 35 Physical Data ENGLISH UNITS General Unit Data Unit Capacity at ARI Conditions, Tons Number of Independent Refrigerant Circuits Refrigerant Charge, R-22, Ckt.-1 / Ckt.-2, lbs. Oil Charge, Ckt.-1 / Ckt.-2, gallons Shipping Weight: Aluminum Fin Coils, lbs. Copper Fin Coils, lbs. Operating Weight: Aluminum Fin Coils, lbs. Copper Fin Coils, lbs. Compressors, DXS Semihermetic Twin Screw Quantity per Chiller Nominal Ton Size, Ckt.-1 / Ckt.-2 Refrigerant Economizer, Ckt.-1 / Ckt.-2 Condensers, High Efficiency Fin / Tube with Integral Total Chiller Coil Face Area, ft2 Number of Rows Fins per Inch CONDENSER FANS Number, Ckt.-1 / Ckt.-2 Standard Fans Fan Motor, HP / kW Fan & Motor RPM Fan Diameter, inches Fan Tip Speed, feet/min. Total Chiller Airflow, CFM Low Noise Fans Fan Motor, HP / kW Fan & Motor Speed, RPM Fan Diameter, inches Fan Tip Speed, feet/min. Total Chiller Airflow, cfm High Static Fans Fan Motor, HP / kW Fan & Motor RPM Fan Diameter, inches Fan Tip Speed, feet/min. Total Chiller Airflow, CFM (@0.4" additional static) Evaporator, Direct Expansion Water Volume, gallons Maximum1 Water Side Pressure, PSIG Maximum Refrigerant Side Pressure, PSIG Minimum Chilled Water Flow Rate, GPM Maximum Chilled Water Flow Rate, GPM Water Connections, inches 0090EC 0100EC 0110EC MODEL NUMBER YCAS 0120EC 0130EC 0140EC 0150EC 0160EC 0170EC 82.9 2 93 / 93 2.7 / 2.7 88.9 2 101 / 101 2.7 / 2.7 102.8 2 122 / 101 2.7 / 2.7 108.5 2 133 / 101 2.7 / 2.7 121.1 2 180 / 180 5/5 130.1 2 180 / 180 5/5 145.3 2 180 / 190 5/5 157.1 2 190 / 190 5/5 164.3 2 190 / 190 5/5 7,125 7,955 7,233 8,064 8,127 9,075 8,181 9,130 9,888 11,154 10,110 11,376 10,599 11,865 10,583 11,849 10,694 11,960 7,552 8,382 7,660 8,491 8,554 9,502 8,608 9,557 10,315 11,581 10,537 11,803 11,263 12,529 11,247 12,513 11,358 12,624 2 46 / 46 Yes / Yes 2 62 / 45 No / Yes 2 68 / 45 Yes / Yes 2 62 / 62 No / No 2 68 / 68 Yes / Yes 2 78 / 68 No / Yes 2 78 / 78 No / No 2 85 / 78 Yes / No 84 3 13 96 3 13 96 3 13 256 3 13 256 3 13 256 3 13 256 3 13 256 3 13 3/3 3/3 3/3 3/3 4/4 4/4 4/4 4/4 4/4 2 / 1.8 1140 35.4 10,575 79,800 2 / 1.8 1140 35.4 10,575 79,800 3 / 2.7 1140 35.4 10,575 93,000 3 / 2.7 1140 35.4 10,575 93,000 2 / 1.8 1140 35.4 10,575 114,400 2 / 1.8 1140 35.4 10,575 114,400 2 / 1.8 1140 35.4 10,575 114,400 2 / 1.8 1140 35.4 10,575 114,400 2 / 1.8 1140 35.4 10,575 114,400 2 / 1.5 838 35.4 7,774 79,800 2 / 1.5 838 35.4 7,774 79,800 3 / 2.7 838 35.4 7,774 93,000 3 / 2.7 838 35.4 7,774 93,000 2 / 1.53 840 35.4 7,792 112,400 2 / 1.53 840 35.4 7,792 112,400 2 / 1.53 840 35.4 7,792 112,400 2 / 1.53 840 35.4 7,792 112,400 2 / 1.53 840 35.4 7,792 112,400 5 / 3.8 1140 35.4 10,575 79,800 5 / 3.8 1140 35.4 10,575 79,800 5 / 5.4 1140 35.4 10,575 93,000 5 / 5.4 1140 35.4 10,575 93,000 5 / 3.79 1140 35.4 10,575 114,400 5 / 3.79 1140 35.4 10,575 114,400 5 / 3.79 1140 35.4 10,575 114,400 5 / 3.79 1140 35.4 10,575 114,400 5 / 3.79 1140 35.4 10,575 114,400 51 150 350 113 600 8 51 150 350 122 600 8 51 150 350 127 600 8 51 150 350 170 600 8 79 150 350 182 747 8 79 150 350 188 747 8 79 150 350 203 747 8 2 42 / 42 No / No Subcooler 84 3 13 51 150 350 133.8 600 8 51 150 350 147 600 8 1 Optional 300 PSIG Waterside available 36 YORK INTERNATIONAL FORM 201.18-EG1 ENGLISH UNITS MODEL NUMBER YCAS 0180EC 0200EC 0210EC 0230EC 0250EC 0270EC 0300EC 0330EC General Unit Data Unit Capacity at ARI Conditions, Tons 171.6 186.7 Number of Independent Refrig. Circuits 2 2 Refrig. Charge, R-22, Ckt.-1 / Ckt.-2, lbs. 190/190 220/220 Ckt-3 / Ckt-4, lbs. –/– –/– Oil Charge, Ckt.-1 / Ckt.-2, gallons 5/5 5/5 Ckt.-3, Ckt.-4, gallons –/– –/– Shipping Weight: Aluminum Fin Coils, lbs. 10,805 11,849 Copper Fin Coils, lbs. 12,071 13,441 Operating Weight: Aluminum Fin Coils, lbs. 11,469 12,513 Copper Fin Coils, lbs. 12,735 14,105 Compressors, DXS Semihermetic Twin Screw Quantity per Chiller 2 2 Nominal Ton Size, Ckt.-1 / Ckt.-2 85/85 95/95 Ckt.-3 / Ckt.-4 –/– –/– Refrigerant Economizer, Ckt.-1 / Ckt.-2 Yes / Yes No / No Ckt.-3 / Ckt.-4 –/– –/– Condensers, High Efficiency Fin / Tube with Integral Subcooler 256 320 Total Chiller Coil Face Area, ft2 Number of Rows 3 3 Fins per Inch 13 13 Condenser Fans Number, Ckt.-1 / Ckt.-2 4/4 5/5 Number, Ckt.-3 / Ckt.-4 –/– –/– Standard Fans Fan Motor, HP / kW 2 / 1.8 2 / 1.8 Fan & Motor RPM 1140 1140 Fan Diameter, inches 35.4 35.4 Fan Tip Speed, feet/min. 10,575 10,575 Total Chiller Airflow, CFM 114,400 143,000 Low Noise Fans Fan Motor, HP / kW 2 / 1.53 2 / 1.53 Fan & Motor RPM 840 840 Fan Diameter, inches 35.4 35.4 Fan Tip Speed, feet/min. 7,792 7,792 Total Chiller Airflow, CFM 112,400 140,500 High Static Fans Fan Motor, HP / kW 5 / 3.79 5 / 3.79 Fan & Motor RPM 1,140 1,140 Fan Diameter, inches 35.4 35.4 Fan Tip Speed, feet/min. 10,575 10,575 Total Chiller Airflow, CFM (@0.4" additional static) 114,400 143,000 Evaporator, Direct Expansion Water Volume, gallons 79 79 Maximum1 Water Side Pressure, PSIG 150 150 Maximum Refrigerant Side Pressure, PSIG 350 350 Minimum Chilled Water Flow Rate, GPM 218 228 Maximum Chilled Water Flow Rate, GPM 747 747 Water Connections, inches 8 8 0360EC 0400EC 0440EC 194.8 209.1 243.3 2 2 3 220/220 220/220 154/154 –/– –/– 154 / – 5/5 5/5 5/5 –/– –/– 5/– 264.5 3 154/154 172/ – 5/5 5/– 287.7 314.1 3 3 187/187 203/203 176/ – 190/ – 5/5 5/5 5/ – 5/– 352.2 386.3 4 4 187/187 212/212 187/187 198/198 5/5 5/5 5/5 5/5 419.1 4 229/229 216/216 5/5 5/5 11,970 13,552 12,081 13,663 15,022 16,922 15,190 17,090 16,570 18,785 16,748 18,964 21,164 23,695 22,476 25,322 22,926 25,772 12,634 14,216 12,745 14,327 17,334 19,235 17,531 19,431 18,896 21,111 19,251 21,466 24,191 26,722 25,564 28,411 26,049 28,896 2 2 3 105/95 105/105 78/78 –/– –/– 78/ – Yes / No Yes / Yes No / No –/– –/– No / – 3 78/78 105/ – No / No Yes/ – 3 3 95/95 105/105 95/ – 105/ – No / No Yes / Yes No / – Yes/ – 4 95/95 78/78 No / No No / No 4 95/95 95/95 No / No No / No 4 105/105 105/105 Yes / Yes Yes / Yes 320 3 13 320 3 13 384 3 13 384 3 13 448 3 13 448 3 13 512 3 13 576 3 13 576 3 13 5/5 –/– 5/5 –/– 4/4 4/ – 4/4 4/ – 5/5 4/ – 5/5 4/ – 4/4 4/4 5/5 4/4 5/5 4/4 2 / 1.8 2 / 1.8 2 / 1.8 1140 1140 1140 35.4 35.4 35.4 10,575 10,575 10,575 143,000 143,000 171,600 2 / 1.8 1140 35.4 10,575 171,600 2 / 1.8 2 / 1.8 1140 1140 35.4 35.4 10,575 10,575 200,200 200,200 2 / 1.8 2 / 1.8 1140 1140 35.4 35.4 10,575 10,575 228,800 257,400 2 / 1.8 1140 35.4 10,575 257,400 2 / 1.53 2 / 1.53 2 / 1.53 840 840 840 35.4 35.4 35.4 7,792 7,792 7,792 140,500 140,500 168,600 2 / 1.53 840 35.4 7,792 168,600 2 / 1.53 2 / 1.53 840 840 35.4 35.4 7,792 7,792 196,700 196,700 2 / 1.53 2 / 1.53 840 840 35.4 35.4 7,792 7,792 224,800 252,900 2 / 1.53 840 35.4 7,792 252,900 5 / 3.79 5 / 3.79 5 / 3.79 1,140 1,140 1,140 35.4 35.4 35.4 10,575 10,575 10,575 143,000 143,000 171,600 5 / 3.79 1,140 35.4 10,575 171,600 5 / 3.79 5 / 3.79 1,140 1,140 35.4 35.4 10,575 10,575 200,200 200,200 5 / 3.79 5 / 3.79 1,140 1,140 35.4 35.4 10,575 10,575 228,800 257,400 5 / 3.79 1,140 35.4 10,575 257,400 79 150 350 246 747 8 79 150 350 272 747 8 116 150 300 225 800 10 116 150 300 225 800 10 94 150 300 255 800 10 94 150 300 255 800 10 150 150 300 300 1060 10 135 150 300 330 1060 10 135 150 300 330 1060 10 1 Optional 300 PSIG Waterside available YORK INTERNATIONAL 37 Physical Data SI UNITS 0090EC 0100EC General Unit Data Unit Capacity at 6.7°C water & 35°C ambient, kW 291.5 312.5 Number of Independent Refrigerant Circuits 2 2 Refrigerant Charge, R-22, Ckt.-1 / Ckt.-2, kg. 42 / 42 46 / 46 Oil Charge, Ckt.-1 / Ckt.-2, liters 10.2 / 10.2 10.2 / 10.2 Shipping Weight: Aluminum Fin Coils, kg. 3,231 3,280 Copper Fin Coils, kg. 3,608 3,657 Operating Weight: Aluminum Fin Coils, kg. 3,426 3,474 Copper Fin Coils, kg. 3,802 3,851 Compressors, DXS Semihermetic Twin Screw Quantity per Chiller 2 2 Nominal kW Size, Ckt.-1 / Ckt.-2 120 / 120 135 / 135 Refrigerant Economizer, Ckt.-1 / Ckt.-2 No / No Yes / Yes Condensers, High Efficiency Fin / Tube with Integral Subcooler 2 Total Chiller Coil Face Area, m 7.80 7.80 Number of Rows 3 3 Fins per Meter 512 512 CONDENSER FANS Number, Ckt.-1 / Ckt.-2 3/3 3/3 Standard Fans Fan Motor, HP / kW 2 / 1.8 2 / 1.8 Fan & Motor Speed, rev./sec. 19.0 19.0 Fan Diameter, mm 900 900 Fan Tip Speed, m/sec. 54 54 Total Chiller Airflow, l/sec. 37,660 37,660 Low Noise Fans Fan Motor, HP / kW 2 / 1.5 2 / 1.5 Fan & Motor Speed, rev./sec. 14 14 Fan Diameter, mm 900 900 Fan Tip Speed, m/sec. 40 40 Total Chiller Airflow, l/sec. 37,660 37,660 High Static Fans Fan Motor, HP / kW 5 / 3.8 5 / 3.8 Fan & Motor Speed, rev./sec. 19.0 19.0 Fan Diameter, mm 900 900 Fan Tip Speed, m/sec. 54 54 Total Chiller Airflow, l/sec. (@0.4" additional static) 37,660 37,660 Evaporator, Direct Expansion Water Volume, liters 193 193 Maximum1 Water Side Pressure, Bar 10 10 Maximum Refrigerant Side Pressure, Bar 24 24 Minimum Chilled Water Flow Rate, l/sec. 7.1 7.7 Maximum Chilled Water Flow Rate, l/sec. 37.9 37.9 Water Connections, inches 8 8 0110EC MODEL NUMBER YCAS 0120EC 0130EC 0140EC 361.6 381.5 2 2 55 / 46 60 / 46 10.2 / 10.2 10.2 / 10.2 0150EC 0160EC 0170EC 425.7 2 82 / 82 19 / 19 457.6 2 82 / 82 19 / 19 510.9 2 82 / 86 19 / 19 552.6 2 86 / 86 19 / 19 578.0 2 86 / 86 19 / 19 3,686 4,116 3,710 4,141 4,484 5,059 4,585 5,159 4,807 5,381 4,800 5,374 4,850 5,424 3,880 4,310 3,904 4,335 4,679 5,253 4,780 5,354 5,109 5,683 5,102 5,676 5,152 5,726 2 220 / 135 No / Yes 2 240 / 135 Yes / Yes 2 220 / 220 No / No 2 240 / 240 Yes / Yes 2 275 / 240 No / Yes 2 275 / 275 No / No 2 300 / 275 Yes / No 8.92 3 512 8.92 3 512 23.78 3 512 23.78 3 512 23.78 3 512 23.78 3 512 23.78 3 512 3/3 3/3 4/4 4/4 4/4 4/4 4/4 3 / 2.7 19.0 900 54 43,889 3 / 2.7 19.0 900 54 43,889 2 / 1.8 19.0 900 40 53,989 2 / 1.8 19.0 900 40 53,989 2 / 1.8 19.0 900 40 53,989 2 / 1.8 19.0 900 40 53,989 2 / 1.8 19.0 900 40 53,989 3 / 2.7 14 900 40 43,889 3 / 2.7 14 900 40 43,889 2 / 1.53 14 900 40 53,045 2 / 1.53 14 900 40 53,045 2 / 1.53 14 900 40 53,045 2 / 1.53 14 900 40 53,045 2 / 1.53 14 900 40 53,045 5 / 5.4 19.0 900 54 43,889 5 / 5.4 19.0 900 54 43,889 5 / 3.79 19.0 900 54 53,989 5 / 3.79 19.0 900 54 53,989 5 / 3.79 19.0 900 54 53,989 5 / 3.79 19.0 900 54 53,989 5 / 3.79 19.0 900 54 53,989 193 10 24 8.0 37.9 8 193 10 24 8.4 37.9 8 193 10 24 9.3 37.9 8 193 10 24 10.7 37.9 8 301 10 24 11.5 47.1 8 301 10 24 11.9 47.1 8 301 10 24 12.8 47.1 8 1 Optional 21 Bar Waterside available 38 YORK INTERNATIONAL FORM 201.18-EG1 SI UNITS MODEL NUMBER YCAS 0180EC 0200EC 0210EC 0230EC 0250EC 0270EC 0300EC 0330EC General Unit Data Unit Capacity at 6.7°C water & 35°C ambient, kW 603.4 656.6 Number of Independent Refrigerant Circuits 2 2 Refrig. Charge, R-22,Ckt.-1 / Ckt.-2, kg. 86 / 86 100 / 100 Ckt.-3 / Ckt.-4, kg. –/– –/– Oil Charge, Ckt.-1 / Ckt.-2, liters 19 / 19 19 / 19 Ckt.-3, Ckt.-4, liters –/– –/– Shipping Weight: Aluminum Fin Coils, kg. 4,900 5,374 Copper Fin Coils, kg. 5,474 6,096 Operating Weight: Aluminum Fin Coils, kg. 5,202 5,676 Copper Fin Coils, kg. 5,777 6,398 Compressors, DXS Semihermetic Twin Screw Quantity per Chiller 2 2 Nominal kW Size, Ckt.-1 / Ckt.-2 300/300 335/335 Ckt.-3 / Ckt.-4 –/– –/– Refrigerant Economizer, Ckt.-1 / Ckt.-2 Yes / Yes No / No Ckt.-3 / Ckt.-4 –/– –/– Condensers, High Efficiency Fin / Tube with Integral Subcooler Total Chiller Coil Face Area, m2 23.78 29.73 Number of Rows 3 3 Fins per Meter 512 512 Condenser Fans Number, Ckt.-1 / Ckt.-2 4/4 5/5 Number, Ckt.-3 / Ckt.-4 –/– –/– Standard Fans Fan Motor, HP / kW 2 / 1.8 2 / 1.8 Fan & Motor speed, rev./sec. 19.0 19.0 Fan Diameter, mm 900 900 Fan Tip Speed, m/sec. 54 54 Total Chiller Airflow, l/sec. 53,989 67,486 Low Noise Fans Fan Motor, HP / kW 2 / 1.53 2 / 1.53 Fan & Motor Speed, rev./sec. 14 14 Fan Diameter, mm 900 900 Fan Tip Speed, m/sec. 40 40 Total Chiller Airflow, l/sec. 53,045 66,307 High Static Fans Fan Motor, HP / kW 5 / 3.79 5 / 3.79 Fan & Motor Speed, rev./sec. 19.0 19.0 Fan Diameter, mm 900 900 Fan Tip Speed, m/sec. 54 54 Total Chiller Airflow, l/sec. (@0.4" additional static) 53,989 67,486 Evaporator, Direct Expansion Water Volume, liters 301 301 Maximum1 Water Side Pressure, Bar 10 10 Maximum Refrigerant Side Pressure, Bar 24 24 Minimum Chilled Water Flow Rate, l/sec. 13.8 14.4 Maximum Chilled Water Flow Rate, l/sec. 47.1 47.1 Water Connections, inches 8 8 685.2 735.2 855.6 2 2 3 100 / 100 100 / 100 70 / 70 –/– –/– 70 / – 19 / 19 19 / 19 19 / 19 –/– –/– 19 / – 0360EC 0400EC 0440EC 930.3 3 70 / 70 78 / – 19 / 19 19 / – 1011.3 3 85 / 85 80 / – 19 / 19 19 / – 1104.7 3 92 / 92 86 / – 19 / 19 19 / – 1238.5 4 85 / 85 85 / 85 19 / 19 19 / 19 1358.7 4 96 / 96 90 / 90 19 / 19 19 / 19 1474.1 4 104 / 104 98 / 98 19 / 19 19 / 19 5,429 6,146 5,479 6,196 6,814 7,676 6,890 7,752 7,516 8,521 7,597 8,602 9,600 10,748 10,195 11,486 10,399 11,690 5,731 6,448 5,781 6,499 7,863 8,725 7,952 8,814 8,571 9,576 8,732 9,737 10,973 12,121 11,596 12,887 11,816 13,107 2 2 3 370/335 370/370 275/275 –/– –/– 275 / – Yes / No Yes / Yes No / No –/– –/– No / – 3 275/275 370 / – No / No Yes/ – 3 3 335/335 370/370 335 / – 370 / – No / No Yes / Yes No / – Yes/ – 4 4 335/335 335/335 275/275 335/335 No / No No / No No / No No / No 4 370/370 370/370 Yes / Yes Yes / Yes 29.73 3 512 29.73 3 512 35.67 3 512 35.67 3 512 41.62 3 512 41.62 3 512 47.57 3 512 53.51 3 512 53.51 3 512 5/5 –/– 5/5 –/– 4/4 4/– 4/4 4/– 5/5 4/– 5/5 4/– 4/4 4/4 5/5 4/4 5/5 4/4 2 / 1.8 19.0 900 54 67,486 2 / 1.8 19.0 900 54 67,486 2 / 1.8 19.0 900 54 80,983 2 / 1.8 19.0 900 54 80,983 2 / 1.8 19.0 900 54 94,481 2 / 1.8 19.0 900 54 94,481 2 / 1.8 2 / 1.8 19.0 19.0 900 900 54 54 107,978 121,475 2 / 1.8 19.0 900 54 121,475 2 / 1.53 14 900 40 66,307 2 / 1.53 14 900 40 66,307 2 / 1.53 14 900 40 79,568 2 / 1.53 14 900 40 79,568 2 / 1.53 14 900 40 92,829 2 / 1.53 14 900 40 92,829 2 / 1.53 2 / 1.53 14 14 900 900 40 40 106,091 119,352 2 / 1.53 14 900 40 119,352 5 / 3.79 19.0 900 54 67,486 5 / 3.79 19.0 900 54 67,486 5 / 3.79 19.0 900 54 80,983 5 / 3.79 19.0 900 54 80,983 5 / 3.79 19.0 900 54 94,481 5 / 3.79 19.0 900 54 94,481 5 / 3.79 5 / 3.79 19.0 19.0 900 900 54 54 107,978 121,475 5 / 3.79 19.0 900 54 121,475 301 10 24 15.5 47.1 8 301 10 24 17.2 47.1 8 524 10 20.7 14 50 10 524 10 20.7 14 50 10 425 10 20.7 16 50 10 425 10 20.7 16 50 10 611 10 20.7 19 67 10 679 10 20.7 21 67 10 679 10 20.7 21 67 10 1 Optional 21 Bar Waterside available YORK INTERNATIONAL 39 Dimensions – YCAS0090 – 0100EC (English) 3 1/4" 9" 3 SPA. @ 5" 3 1/2" 5" 7" 5" 1" TYP. 2 1/4" 2" 9" 1 3/4" 17" 17" 2" 1" 1" TYP. POWER ENTRY (8) 1 1/2",2",2 1/2" CONDUIT K.O.'S CONTROL ENTRY (7) 1/2" CONDUIT K.O.'S CONTROL ENTRY (8) 7/8" DIA. HOLES VIEW B-B VIEW C-C LD04469 MICRO-COMPUTER CONTROL CENTER C OPTIONS PANEL C B B 17 1/4" CONTROL TRANSFORMER SERVICE SWITCH 1 11/16" 1 15/16" (EDGE OF UNIT TO COOLER CONNECTION) 88" 91 3/8" LD04470 VIEW A-A POWER: MULTIPLE POINT WITH TERMINAL BLOCKS NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 6'; rear to wall - 6'; control panel end to wall - 4'; top - no obstructions allowed; distance between adjacent units - 10'. No more than one adjacent wall may be higher than the unit. 40 YORK INTERNATIONAL FORM 201.18-EG1 5/8" DIA. MOUNTING HOLES (TYP.) 1 1/4" 3" A POWER 25 1/2" C B POWER ELEMENTS FOR SYS. 1 88" CONTROL/OPTIONS PANEL POWER 31" 25 1/2" POWER ELEMENTS FOR SYS. 2 D F E 1 1/4" 45 1/2" 23 7/8" ORIGIN 45 1/2" Y LD04625 VIEW D-D X C G CENTER OF GRAVITY (Alum.) YCAS X Y Z 0090 72.9" 41.6" 35.5" 0100 73.0" 41.5" 35.2" CENTER OF GRAVITY (Copper) YCAS 0090 0100 X 73.7" 73.8" Y 41.9" 41.7" Z 38.4" 30.01" A D D 23" 96" 25" SYS.#1 SYS.#2 69 3/4" 8" WATER OUTLET A 27 7/8" 83" 106 1/2" 15 3/4" 8" WATER INLET (2) 2 1/4" DIA. RIGGING HOLES (EACH SIDE) 138 3/4" 147 7/8" Z CG YORK INTERNATIONAL X LD05211 41 Dimensions – YCAS0090 – 0100EC (SI) 83 229 3 SPA. @ 127 89 127 178 127 25 TYP. 57 51 229 44 432 432 25 TYP. POWER ENTRY (8) 38,51,64 CONDUIT K.O.'S 51 25 CONTROL ENTRY (7) 13 CONDUIT K.O.'S CONTROL ENTRY (8) 22 DIA. HOLES VIEW B-B VIEW C-C MICRO-COMPUTER CONTROL CENTER C C OPTIONS PANEL B B 438 43 2235 49 (EDGE OF UNIT TO COOLER CONNECTION) 2321 VIEW A-A POWER: MULTIPLE POINT WITH TERMINAL BLOCKS LD05210 NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 2m; rear to wall - 2m; control panel end to wall - 1.2m; top - no obstructions allowed; distance between adjacent units - 3m. No more than one adjacent wall may be higher than the unit. 42 YORK INTERNATIONAL FORM 201.18-EG1 16 DIA. MOUNTING HOLES (TYP.) 32 POWER 76 648 B A C POWER ELEMENTS FOR SYS. 1 2235 CONTROL/OPTIONS PANEL 787 APPROX. OPERATING WEIGHT DISTRIBUTION (KG) POWER POWER ELEMENTS FOR SYS. 2 648 D E F 32 606 1156 1156 Y ORIGIN LD05212 CG X VIEW D-D CENTER OF GRAVITY (Alum.) YCAS X Y Z 0090 1852.3 1057.4 902.0 0100 1855.4 1053.5 895.0 CENTER OF GRAVITY (Copper) YCAS X Y Z 0090 1872.9 1063.3 974.7 0100 1875.4 1059.8 967.4 A D D 584 2438 635 SYS.#1 SYS.#2 1772 8" WATER OUTLET A 708 8" WATER INLET 2108 400 2705 (2) 57 DIA. RIGGING HOLES (EACH SIDE) 3524 3755 LD05213 Z CG YORK INTERNATIONAL X 43 Dimensions – YCAS0110 – 0120EC (English) 3 1/4" 9" 3 SPA. @ 5" 3 1/2" 5" 7" 5" 1" TYP. 2 1/4" 2" 9" 1 3/4" 17" 17" 2" 1" 1" TYP. POWER ENTRY (8) 1 1/2",2",2 1/2" CONDUIT K.O.'S CONTROL ENTRY (8) 7/8" DIA. HOLES CONTROL ENTRY (7) 1/2" CONDUIT K.O.'S VIEW B-B VIEW C-C LD04473 MICRO-COMPUTER CONTROL CENTER C OPTIONS PANEL C B B 17 1/4" CONTROL TRANSFORMER SERVICE SWITCH 1 11/16" 1 15/16" (EDGE OF UNIT TO COOLER CONNECTION) 88" 91 3/8" LD04474 VIEW A-A POWER: MULTIPLE POINT WITH TERMINAL BLOCKS NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 6'; rear to wall - 6'; control panel end to wall - 4'; top - no obstructions allowed; distance between adjacent units - 10'. No more than one adjacent wall may be higher than the unit. 44 YORK INTERNATIONAL FORM 201.18-EG1 5/8" DIA. MOUNTING HOLES (TYP.) 1 1/4" POWER 3" 25 1/2" A C B POWER ELEMENTS FOR SYS. 1 88" CONTROL/OPTIONS PANEL 31" POWER ELEMENTS FOR SYS. 2 POWER 25 1/2" D F E 1 1/4" 55 13/16" 19 9/16" 54 3/8" LD04475 Y ORIGIN VIEW D-D X CG CENTER OF GRAVITY (Alum.) YCAS X Y Z 0110 81.0" 43.2" 36.2" 0120 81.1" 43.1" 36.1" CENTER OF GRAVITY (Copper) YCAS 0110 0120 X 82.7" 82.8" Y 43.3" 43.2" Z 39.1" 38.9" A D D 23" 96" 25" SYS.#1 SYS.#2 69 3/4" 8" WATER OUTLET A 42 3/16" 83" 8" WATER INLET (2) 2 1/4" DIA. RIGGING HOLES (EACH SIDE) 98 11/16" 24 15/16" 164 15/16" 174 1/16" LD05209 Z CG YORK INTERNATIONAL X 45 Dimensions – YCAS0110 – 0120EC (SI) 83 229 3 SPA. @ 127 89 127 178 127 25 TYP. 57 51 229 44 432 432 25 TYP. POWER ENTRY (8) 38,51,64 CONDUIT K.O.'S 51 25 CONTROL ENTRY (8) 22 DIA. HOLES CONTROL ENTRY (7) 13 CONDUIT K.O.'S VIEW B-B VIEW C-C MICRO-COMPUTER CONTROL CENTER C C OPTIONS PANEL B B 438 43 2235 49 (EDGE OF UNIT TO COOLER CONNECTION) 2321 VIEW A-A LD05208 POWER: MULTIPLE POINT WITH TERMINAL BLOCKS NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 2m; rear to wall - 2m; control panel end to wall - 1.2m; top - no obstructions allowed; distance between adjacent units - 3m. No more than one adjacent wall may be higher than the unit. 46 YORK INTERNATIONAL FORM 201.18-EG1 16 DIA. MOUNTING HOLES (TYP.) 32 POWER 76 648 B A C POWER ELEMENTS FOR SYS. 1 2235 CONTROL/OPTIONS PANEL 787 APPROX. OPERATING WEIGHT DISTRIBUTION (KG) POWER ELEMENTS FOR SYS. 2 POWER 648 D E F 32 497 1418 1380 LD05214 Y ORIGIN X CG VIEW D-D CENTER OF GRAVITY (Alum.) YCAS X Y Z 0110 1811.4 1093.5 877.2 0120 1814.1 1091.4 874.0 CENTER OF GRAVITY (Copper) YCAS X Y Z 0110 1834.7 1095.7 948.5 0120 1837.0 1093.8 945.1 A D D 584 2438 635 SYS.#1 SYS.#2 1772 A 8" WATER OUTLET 8" WATER INLET 2108 (2) 57 DIA. RIGGING HOLES (EACH SIDE) 1072 633 2506 4189 4421 Z LD05215 CG YORK INTERNATIONAL X 47 Dimensions – YCAS0130 - 0180 (English) 7" 28" CONTROL OPENING (9" HIGH) 2" CONTROL ENTRY (12) 1/2" CONDUIT K.O.'S 42" 2" 12" 31 1/2" 4 3/4" 2" TYP. RECOMMENDED POWER OPENING (21" HIGH) 9" VIEW B-B 7 1/2" LD03742a VIEW C-C SYS. #1 COILS MICRO-COMPUTER CONTROL CENTER SYS. #2 COILS OPTIONS PANEL B B C P CONTROL TRANSFORMER SERVICE SWITCH ALTERNATIVE POWER OPENING (7" WIDE X 21" HIGH) C 1 13/16" (EDGE OF UNIT TO COOLER CONNECTION) DO NOT USE unless 2-compressor unit with multiple point power 91 3/8" LD03742 VIEW A-A DIMENSION P Q MODELS 130 - 140 17-1/4" 83" MODELS 150 - 180 18" 107" NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 6'; rear to wall - 6'; control panel end to wall - 4'; top - no obstructions allowed; distance between adjacent units - 10'. No more than one adjacent wall may be higher than the unit. 48 YORK INTERNATIONAL FORM 201.18-EG1 5/8" DIA. MOUNTING HOLES (TYP.) 1-1/4" POWER PANEL A 30" 88" 30" B C D F G H POWER ELEMENTS FOR SYS. # 1 POWER ELEMENTS FOR SYS. # 2 CONTROL PANEL E 1-1/4" 31-3/4" 53-7/8" 53-7/8" 53-7/8" Y ORIGIN LD03743 TOP VIEW CG X CENTER OF GRAVITY (Alum.) YCAS X Y Z 0130 101.3" 44.4" 37.8" 0140 101.3" 44.4" 37.8" 0150 106.7" 42.8" 36.2" 0160 107.0" 43.0" 36.2" 0170 107.0" 43.0" 36.2" 0180 107.0" 43.0" 36.2" CENTER OF GRAVITY (Copper) YCAS 0130 0140 0150 0160 0170 0180 X 103.5" 103.5" 108.2" 108.4" 108.4" 108.4" Y 44.4" 44.4" 43.0" 43.1" 43.1" 43.1" Z 40.7" 40.7" 39.2" 39.1" 39.1" 39.1" A 36" 96" 78" 2" SYS. #1 7-1/2" POWER OPENING (BOTH SIDES) SYS. #2 8" WATER OUTLET A 54-1/2" 37-1/2" (2) 2-1/4" DIA. RIGGING HOLES (EACH SIDE) Q 117-11/16" 8" WATER INLET 225-1/8" SIDE VIEW Z LD03744 X YORK INTERNATIONAL 49 Dimensions – YCAS0130 - 0180 (SI) All dimensions are in mm unless otherwise noted. 178 CONTROL OPENING (229 HIGH) 711 51 CONTROL ENTRY (12) 13 CONDUIT K.O.'S 1067 51 305 800 120 51 TYP. RECOMMENDED POWER OPENING (533 HIGH) 229 VIEW B-B 191 VIEW C-C SYS. #1 COILS SYS. #2 COILS LD03745a MICRO-COMPUTER CONTROL CENTER OPTIONS PANEL B B C P CONTROL TRANSFORMER SERVICE SWITCH ALTERNATIVE POWER OPENING (178 WIDE x 533 HIGH) C 46 (EDGE OF UNIT TO COOLER CONNECTION) DO NOT USE unless 2-compressor unit with multiple point power 2321 LD03745 VIEW A-A DIMENSION P Q MODELS 130 - 140 438 2110 MODELS 150 - 180 457 2718 NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 2m; rear to wall - 2m; control panel end to wall - 1.2m; top - no obstructions allowed; distance between adjacent units - 3m. No more than one adjacent wall may be higher than the unit. 50 YORK INTERNATIONAL FORM 201.18-EG1 16 DIA. MOUNTING HOLES (TYP.) 32 POWER PANEL A 762 2235 762 B C D F G H POWER ELEMENTS FOR SYS. #1 POWER ELEMENTS FOR SYS. #2 CONTROL PANEL E 32 806 ORIGIN 1368 1368 1368 LD03746 Y X TOP VIEW CENTER OF GRAVITY (Alum.) YCAS X Y Z 0130 2573.0 1127.8 960.1 0140 2573.0 1127.8 960.1 0150 2710.2 1087.1 919.5 0160 2717.8 1092.2 919.5 0170 2717.8 1092.2 919.5 0180 2717.8 1092.2 919.5 CENTER OF GRAVITY (Copper) YCAS 0130 0140 0150 0160 0170 0180 X 2628.9 2628.9 2748.3 2573.4 2573.4 2573.4 Y Z 1127.8 1033.8 1127.8 1033.8 1092.2 995.7 1094.7 993.1 1094.7 993.1 1094.7 993.1 A 914 2438 1981 50 SYS. #1 POWER OPENING (BOTH SIDES) 191 A SYS. #2 8" WATER OUTLET 1385 Q 953 2989 (2) 57 DIA. RIGGING HOLES (EACH SIDE) 8" WATER INLET 5718 SIDE VIEW Z LD03747 X YORK INTERNATIONAL 51 Dimensions – YCAS0200 - 0230 (English) 7" 28" CONTROL OPENING (9" HIGH) 2" CONTROL ENTRY (12) 1/2" CONDUIT K.O.'S 42" 2" 12" 31 1/2" 4 3/4" 2" TYP. RECOMMENDED POWER OPENING (21" HIGH) 9" VIEW B-B VIEW C-C 7 1/2" LD03748a SYS. #1 COILS SYS. #2 COILS MICRO-COMPUTER CONTROL CENTER OPTIONS PANEL B B C 18" ALTERNATIVE POWER OPENING (7" WIDE x 21" HIGH) DO NOT USE unless 2-compressor unit with multiple point power CONTROL TRANSFORMER SERVICE SWITCH C 15/16" (EDGE OF UNIT TO COOLER CONNECTION) 91-3/8" VIEW A-A LD03748 NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 6'; rear to wall - 6'; control panel end to wall - 4'; top - no obstructions allowed; distance between adjacent units - 10'. No more than one adjacent wall may be higher than the unit. 52 YORK INTERNATIONAL FORM 201.18-EG1 5/8" DIA. MOUNTING HOLES (TYP.) 1-1/4" POWER PANEL A 30" 88" 30" B C D F G H POWER ELEMENTS FOR SYS. #1 POWER ELEMENTS FOR SYS. #2 CONTROL PANEL E 1-1/4" 65-5/16" 31-3/4" 65-5/16" 74-13/16" LD03749 Y ORIGIN TOP VIEW X CENTER OF GRAVITY (Alum.) YCAS X Y Z 0200 119.4" 43.2" 38.0" 0210 119.4" 43.2" 38.0" 0230 119.4" 43.2" 38.0" CENTER OF GRAVITY (Copper) YCAS 0200 0210 0230 X 122.3" 122.3" 122.3" Y 43.3" 43.3" 43.3" Z 41.0" 41.0" 41.0" A 36" 96" 78" 2" SYS. #2 SYS. #1 7-1/2" POWER OPENING (BOTH SIDES) 8" WATER OUTLET A (3) 2-1/4" DIA. RIGGING HOLES (EACH SIDE) 107" 54-7/16" 37-1/2" 8" WATER INLET 86" 74-13/16" 273-1/8" SIDE VIEW Z LD03750 X YORK INTERNATIONAL 53 Dimensions – YCAS0200 - 0230 (SI) All dimensions are in mm unless otherwise noted. 178 CONTROL OPENING (229 HIGH) 711 51 CONTROL ENTRY (12) 13 CONDUIT K.O.'S 1067 51 305 800 120 51 TYP. RECOMMENDED POWER OPENING (533 HIGH) 229 VIEW B-B 191 VIEW C-C LD03751a SYS. #1 COILS SYS. #2 COILS MICRO-COMPUTER CONTROL CENTER OPTIONS PANEL B B C 457 ALTERNATIVE POWER OPENING (178 WIDE x 533 WIDE) DO NOT USE unless 2-compressor unit with multiple point power CONTROL TRANSFORMER SERVICE SWITCH C 24 (EDGE OF UNIT TO COOLER CONNECTION) 2321 VIEW A-A LD03751 NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 2m; rear to wall - 2m; control panel end to wall - 1.2m; top - no obstructions allowed; distance between adjacent units - 3m. No more than one adjacent wall may be higher than the unit. 54 YORK INTERNATIONAL FORM 201.18-EG1 16 DIA. MOUNTING HOLES (TYP.) 32 A POWER PANEL 762 2235 762 B C D F G H POWER ELEMENTS FOR SYS. #1 POWER ELEMENTS FOR SYS. #2 CONTROL PANEL E 32 1658 806 ORIGIN 1658 1900 Y LD03752 TOP VIEW X CENTER OF GRAVITY (Alum.) YCAS X Y Z 0200 3032.8 1097.3 965.2 0210 3032.8 1097.3 965.2 0230 3032.8 1097.3 965.2 CENTER OF GRAVITY (Copper) YCAS X Y Z 0200 3106.4 1099.8 1041.4 0210 3106.4 1099.8 1041.4 0230 3106.4 1099.8 1041.4 A 914 2438 1981 50 POWER OPENING (BOTH SIDES) 191 A SYS. #2 SYS. #1 8" WATER INLET 8" WATER OUTLET 2718 2184 (3) 57 DIA. RIGGING HOLES (EACH SIDE) 1900 6937 SIDE VIEW Z X YORK INTERNATIONAL LD03753 55 Dimensions – YCAS0250 - 0270 (English) 7" 28" CONTROL OPENING (9" HIGH) 2" CONTROL ENTRY (12) 1/2" CONDUIT K.O.'S 42" 2" 12" 31 1/2" 4 3/4" 2" TYP. POWER OPENING (21" HIGH) 9" VIEW B-B VIEW C-C 7 1/2" LD03964 MICRO-COMPUTER CONTROL CENTER B B OPTIONS PANEL C 20-1/8" CONTROL TRANSFORMER SERVICE SWITCH C 4-7/16" (EGDE OF UNIT TO COOLER CONNECTION) 91-13/16" VIEW A-A LD03964a NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 6'; rear to wall - 6'; control panel end to wall - 4'; top - no obstructions allowed; distance between adjacent units - 10'. No more than one adjacent wall may be higher than the unit. 56 YORK INTERNATIONAL FORM 201.18-EG1 5/8" DIA. MOUNTING HOLES (TYP.) 1-1/4" A POWER PANEL 30" 88" 30" B C D E F H I J K L POWER ELEMENTS FOR SYS. #1 & #3 POWER ELEMENTS FOR SYS. #2 CONTROL PANEL G 1-1/4" 57-3/16" 31-3/4" ORIGIN 57-3/16" 48-3/8" 57-3/16" 55-1/8" Y TOP VIEW X LD03965 CENTER OF GRAVITY (Alum.) YCAS X Y Z 0250 141.6" 41.6" 33.8" 0270 140.6" 41.7" 33.7" CENTER OF GRAVITY (Copper) YCAS 0250 0270 X 145.4" 144.5" Y Z 41.9" 40.5" 42.0" 40.3" A 36" 96" 78" 2" SYS. #3 SYS. #1 & #2 POWER OPENING (BOTH SIDES) 7-1/2" A 2-1/4" DIA. RIGGING HOLES (EACH SIDE) 10" WATER INLET 10" WATER OUTLET 104" 68" 89-11/16" 67-7/16" 63-9/16" 342-1/4" Z SIDE VIEW X YORK INTERNATIONAL LD03966 57 Dimensions – YCAS0250 - 0270 (SI) All dimensions are in mm unless otherwise noted. 178 711 CONTROL OPENING (229 HIGH) 51 CONTROL ENTRY (12) 22 CONDUIT K.O.'S 1067 51 305 800 120 51 TYP. POWER OPENING (533 HIGH) 229 VIEW B-B VIEW C-C 191 LD03968 MICRO-COMPUTER CONTROL CENTER B B OPTIONS PANEL C 511 CONTROL TRANSFORMER SERVICE SWITCH C 112 (EDGE OF UNIT TO COOLER CONNECTION) 2331 VIEW A-A LD03967 NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 2m; rear to wall - 2m; control panel end to wall - 1.2m; top - no obstructions allowed; distance between adjacent units - 3m. No more than one adjacent wall may be higher than the unit. 58 YORK INTERNATIONAL FORM 201.18-EG1 16 DIA. MOUNTING HOLES (TYP.) 32 B A POWER ELEMENTS FOR SYS. #1 & #3 POWER PANEL 762 2235 762 C D E F I J K L POWER ELEMENTS FOR SYS. #2 CONTROL PANEL G H 32 1453 806 1453 1453 ORIGIN 1229 1400 TOP VIEW CENTER OF GRAVITY (Alum.) YCAS X Y Z 0250 3597 1057 860 0270 3572 1060 855 LD03969 CENTER OF GRAVITY (Copper) YCAS 0250 0270 X 3693 3670 Y 1063 1066 Z 1030 1023 A 914 2438 1981 50 SYS. #3 SYS. #1 & #2 POWER OPENING (BOTH SIDES) 191 A 1727 (4) 57 DIA. RIGGING HOLES (EACH SIDE) 3708 10" WATER INLET 10" WATER OUTLET 2642 2277 1713 1614 8694 Z SIDE VIEW LD03970 X YORK INTERNATIONAL 59 Dimensions – YCAS0300 - 0330 (English) 7" 28" CONTROL OPENING (9" HIGH) 2" CONTROL ENTRY (12) 1/2" CONDUIT K.O.'S 42" 2" 12" 31 1/2" 4 3/4" 2" TYP. POWER OPENING (21" HIGH) 9" VIEW B-B VIEW C-C 7 1/2" LD03980 MICRO-COMPUTER CONTROL CENTER B B OPTIONS PANEL C 20-1/8" CONTROL TRANSFORMER SERVICE SWITCH C 4-7/16" (EDGE OF UNIT TO COOLER CONNECTION) 91-13/16" VIEW A-A LD03979 NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 6'; rear to wall - 6'; control panel end to wall - 4'; top - no obstructions allowed; distance between adjacent units - 10'. No more than one adjacent wall may be higher than the unit. 60 YORK INTERNATIONAL FORM 201.18-EG1 5/8" DIA. MOUNTING HOLES (TYP.) POWER PANEL 1-1/4" 30" 88" 30" A B C D E F I J K L POWER ELEMENTS FOR SYS. #1 & #3 POWER ELEMENTS FOR SYS. #2 CONTROL PANEL G 1-1/4" 31-3/4" ORIGIN H 57-3/16" 57-3/16" Y 56-5/16" 57-3/16" 95-3/16" TOP VIEW LD03981 X CENTER OF GRAVITY (Alum.) YCAS X Y Z 0300 154.0" 41.6" 34.8" 0330 151.3" 41.7" 34.5" CENTER OF GRAVITY (Copper) YCAS 0300 0330 X 159.2" 156.8" Y Z 41.9" 41.8" 41.9" 41.4" A 36" 96" 78" 2" SYS. #3 SYS. #1 & #2 POWER OPENING (BOTH SIDES) 7-1/2" A (4) 2-1/4" DIA. RIGGING HOLES (EACH SIDE) 146" 68" 89-11/16" 10" WATER INLET 104" 115-7/16" 10" WATER OUTLET 63-9/16" 390-1/4" Z SIDE VIEW X YORK INTERNATIONAL LD03982 61 Dimensions – YCAS0300 - 0330 (SI) All dimensions are in mm unless otherwise noted. 178 CONTROL OPENING (229 HIGH) 711 51 CONTROL ENTRY (12) 22 CONDUIT K.O.'S 1067 51 305 800 120 51 TYP. POWER OPENING (533 HIGH) 229 VIEW B-B VIEW C-C 191 LD03984 MICRO-COMPUTER CONTROL CENTER OPTIONS PANEL B B C 511 CONTROL TRANSFORMER SERVICE SWITCH C 112 (EDGE OF UNIT TO COOLER CONNECTION) 2331 VIEW A-A LD03983 NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 2m; rear to wall - 2m; control panel end to wall - 1.2m; top - no obstructions allowed; distance between adjacent units - 3m. No more than one adjacent wall may be higher than the unit. 62 YORK INTERNATIONAL FORM 201.18-EG1 16 DIA. MOUNTING HOLES (TYP.) 32 2235 A POWER PANEL 762 762 B C D E F I J K L POWER ELEMENTS FOR SYS. #1 & #3 POWER ELEMENTS FOR SYS. #2 CONTROL PANEL G H 32 806 ORIGIN 1453 1453 1453 2417 1431 Y POWER PANEL X TOP VIEW CENTER OF GRAVITY (Alum.) YCAS X Y Z 0300 3911 1057 883 0330 3842 1058 876 LD03985 CENTER OF GRAVITY (Copper) YCAS 0300 0330 X 4045 3982 Y 1064 1065 Z 1061 1051 A 914 2438 1981 50 SYS. #3 SYS. #1 & #2 POWER OPENING (BOTH SIDES) 191 A (4) 57 DIA. RIGGING HOLES (EACH SIDE) 10" WATER INLET 2642 3708 1727 2277 2932 10" WATER OUTLET 1614 9913 SIDE VIEW Z X YORK INTERNATIONAL LD03986 63 Dimensions – YCAS0360 (English) 7" CONTROL OPENING (9" HIGH) 28" 42" 2" CONTROL ENTRY (12) 1/2" CONDUIT K.O.'S 2" 12" 31 1/2" 4 3/4" POWER OPENING (21" HIGH) 2" TYP. 9" VIEW B-B VIEW C-C 7 1/2" LD03996 MICRO-COMPUTER CONTROL CENTER B B OPTIONS PANEL C 21-3/8" CONTROL TRANSFORMER SERVICE SWITCH C 25-5/8" (EDGE OF UNIT TO COOLER CONNECTION) 91-13/16" VIEW A-A LD03995 NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 6'; rear to wall - 6'; control panel end to wall - 4'; top - no obstructions allowed; distance between adjacent units - 10'. No more than one adjacent wall may be higher than the unit. 64 YORK INTERNATIONAL FORM 201.18-EG1 5/8" DIA. MOUNTING HOLES (TYP.) POWER PANEL 1-1/4" 30" 88" 30" A B POWER ELEMENTS FOR SYS. #1 & #3 D E F G H K L M N O P POWER ELEMENTS FOR SYS. #2 & #4 CONTROL PANEL I J 31-3/4" ORIGIN C 57-3/16" 57-3/16" 57-3/16" 36-5/16" 1-1/4" 56" 56" 56" Y TOP VIEW LD03997 X CENTER OF GRAVITY (Alum.) YCAS X Y Z 0360 197.3" 44.0" 33.2" CENTER OF GRAVITY (Copper) YCAS 0360 X 200.7" Y Z 44.0" 39.6" A 36" 96" 78" 2" 7-1/2" A SYS. #1 & #2 POWER OPENING (BOTH SIDES) 68" SYS. #3 & #4 10" WATER INLET (4) 2-1/4" DIA. RIGGING HOLES (EACH SIDE) 262-3/4" 89-11/16" 104" 10" WATER OUTLET 111-9/16" 67-7/16" 438-1/4" Z SIDE VIEW X YORK INTERNATIONAL LD03998 65 Dimensions – YCAS0360 (SI) All dimensions are in mm unless otherwise noted. 178 CONTROL OPENING (229 HIGH) 711 51 CONTROL ENTRY (12) 22 CONDUIT K.O.'S 1067 51 305 800 120 51 TYP. POWER OPENING (533 HIGH) 229 VIEW B-B VIEW C-C 191 LD04000 MICRO-COMPUTER CONTROL CENTER B B OPTIONS PANEL C 543 CONTROL TRANSFORMER SERVICE SWITCH C 651 (EDGE OF UNIT TO COOLER CONNECTION) 2331 VIEW A-A LD03999 NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 2m; rear to wall - 2m; control panel end to wall - 1.2m; top - no obstructions allowed; distance between adjacent units - 3m. No more than one adjacent wall may be higher than the unit. 66 YORK INTERNATIONAL FORM 201.18-EG1 16 DIA. MOUNTING HOLES (TYP.) 32 A POWER PANEL 762 2235 762 B C D E F G H K L M N O P POWER ELEMENTS FOR SYS. #1 & #3 POWER ELEMENTS FOR SYS. #2 & #4 CONTROL PANEL I J 32 806 1453 1453 1453 923 1422 1422 1422 Y ORIGIN TOP VIEW X LD04001 CENTER OF GRAVITY (Alum.) YCAS X Y Z 0360 5011 1117 844 CENTER OF GRAVITY (Copper) YCAS 0360 X 5097 Y 1117 Z 1005 A 914 2438 1981 50 191 A POWER OPENING (BOTH SIDES) 10" WATER INLET (4) 57 DIA. RIGGING HOLES (EACH SIDE) 2642 6673 1727 2277 10" WATER OUTLET 1713 2833 11132 Z SIDE VIEW X YORK INTERNATIONAL LD04002 67 Dimensions – YCAS0400 - 0440 (English) 7" 28" CONTROL OPENING (9" HIGH) 2" CONTROL ENTRY (12) 1/2" CONDUIT K.O.'S 42" 2" 12" 31 1/2" 4 3/4" 2" TYP. POWER OPENING (21" HIGH) 9" VIEW B-B VIEW C-C 7 1/2" LD04004 MICRO-COMPUTER CONTROL CENTER B B OPTIONS PANEL C 21-3/8" POWER OPENING (7" WIDE x 21" HIGH) CONTROL TRANSFORMER SERVICE SWITCH C 25-5/8" (EDGE OF UNIT TO COOLER CONNECTION) DO NOT USE unless 2-compressor unit with multiple point power 91-13/16" VIEW A-A LD04003 NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 6'; rear to wall - 6'; control panel end to wall - 4'; top - no obstructions allowed; distance between adjacent units - 10'. No more than one adjacent wall may be higher than the unit. 68 YORK INTERNATIONAL FORM 201.18-EG1 POWER PANEL 5/8" DIA. MOUNTING HOLES (TYP.) 30" 88" 30" A B 1-1/4" C D E F G H K L M N O P POWER ELEMENTS FOR SYS. #1 & #3 POWER ELEMENTS FOR SYS. #2 & #4 CONTROL PANEL I 31-3/4" ORIGIN J 1-1/4" 57-3/16" 57-3/16" 84-5/16" 57-3/16" 56" 56" 56" Y LD04005 TOP VIEW X CENTER OF GRAVITY (Alum.) YCAS X Y Z 0400 218.7" 44.0" 34.1" 0440 214.9" CENTER OF GRAVITY (Copper) YCAS 0400 0440 44.0" 33.9" X 222.5" 219.0" Y Z 44.0" 40.8" 44.0" 40.5" A 36" 78" 96" 2" 7-1/2" A SYS. #1 & #2 POWER OPENING (BOTH SIDES) 68" SYS. #3 & #4 10" WATER INLET (4) 2-1/4" DIA. RIGGING HOLES (EACH SIDE) 310-3/4" 89-11/16" 104" 115-7/16" 10" WATER OUTLET 111-9/16" 486-1/4" Z X YORK INTERNATIONAL SIDE VIEW LD04006 69 Dimensions – YCAS0400 - 0440 (SI) All dimensions are in mm unless otherwise noted. 178 711 CONTROL OPENING (229 HIGH) 51 CONTROL ENTRY (12) 13 CONDUIT K.O.'S 1067 51 305 800 120 51 TYP. POWER OPENING (533 HIGH) 229 VIEW B-B VIEW C-C 191 LD04008 MICRO-COMPUTER CONTROL CENTER B B OPTIONS PANEL C 543 CONTROL TRANSFORMER SERVICE SWITCH C 651 (EDGE OF UNIT TO COOLER CONNECTION) 2331 VIEW A-A LD04007 NOTES: 1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 2m; rear to wall - 2m; control panel end to wall - 1.2m; top - no obstructions allowed; distance between adjacent units - 3m. No more than one adjacent wall may be higher than the unit. 70 YORK INTERNATIONAL FORM 201.18-EG1 POWER PANEL 16 DIA. MOUNTING HOLES (TYP.) 762 2235 762 A B POWER ELEMENTS FOR SYS. #1 & #3 32 C D E F G H K L M N O P POWER ELEMENTS FOR SYS. #2 & #4 CONTROL PANEL I J 32 806 ORIGIN 1453 1453 Y 2142 1453 1422 1422 TOP VIEW 1422 LD04009 X CENTER OF GRAVITY (Alum.) YCAS X Y Z 0400 5556 1117 867 0440 5459 1117 861 CENTER OF GRAVITY (Copper) YCAS 0400 0440 X 5650 5563 Y 1117 1117 Z 1037 1028 A 914 2438 1981 191 A 50 SYS. #3 & #4 SYS. #1 & #2 POWER OPENING (BOTH SIDES) 10" WATER INLET (4) 57 DIA. RIGGING HOLES (EACH SIDE) 2642 7892 1727 2277 2932 10" WATER OUTLET 2833 12351 SIDE VIEW YORK INTERNATIONAL LD04010 71 Operating Weights – Aluminum Fin Coils ALUMINUM FIN COIL WEIGHT DISTRIBUTION BY MODEL ( LBS ) YCAS A B C D E F G H I J K L M N 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0200 0210 0230 0250 0270 0300 0330 0360 0400 0440 1,405 1,415 1,508 1,510 1,550 1,576 1,634 1,637 1,639 1,662 1,856 1,859 1,862 1,209 1,225 1,254 1,295 1,323 1,380 1,435 1,191 1,203 1,399 1,405 1,339 1,356 1,227 1,210 1,231 1,227 1,358 1,387 1,415 1,821 1,837 1,924 1,966 1,866 1,882 1,938 977 992 1,290 1,301 1,657 1,692 1,517 1,538 1,554 1,561 2,077 2,089 2,098 1,964 2,015 2,094 2,137 1,792 1,851 1,907 1,565 1,587 1,566 1,573 678 688 1,095 1,109 1,114 1,132 869 874 878 1,051 1,082 1,227 1,269 1,064 1,285 1,341 1,326 1,350 1,452 1,464 1,573 1,614 1,794 1,796 1,798 1,836 1,983 1,986 1,989 1,038 1,039 1,183 1,186 1,001 1,048 1,051 1,088 1,113 1,339 1,355 1,111 1,136 1,194 1,163 1,198 1,188 1,207 1,254 1,303 830 832 1,017 1,022 2,098 2,185 2,190 –– –– –– –– 1,707 1,764 1,472 1,460 1,485 1,494 2,261 2,278 2,289 1,209 1,225 1,254 1,295 1,727 1,813 1,888 –– –– –– –– 700 711 1,330 1,334 1,339 1,369 902 907 911 2,010 2,027 2,069 2,112 1,224 1,338 1,274 –– –– –– –– –– –– –– –– –– –– –– –– –– 2,351 2,374 2,511 2,554 1,323 1,380 1,435 –– –– –– –– –– –– –– –– –– –– –– –– –– 797 817 1,030 1,072 1,866 1,882 1,938 –– –– –– –– –– –– –– –– –– –– –– –– –– 2,112 2,113 2,316 2,320 1,792 1,851 1,907 –– –– –– –– –– –– –– –– –– –– –– –– –– 943 945 1,017 1,022 1,064 1,285 1,341 –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 1,001 1,048 1,051 –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 2,098 2,185 2,190 O P –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 1,727 1,224 1,813 1,338 1,888 1,274 TOTAL 7,552 7,660 8,554 8,608 10,315 10,537 11,263 11,247 11,358 11,358 12,513 12,634 12,745 17,334 17,531 18,896 19,251 24,191 25,564 26,049 ALUMINUM FIN COIL WEIGHT DISTRIBUTION BY MODEL ( KGS ) YCAS A B C D E F G H I J K L M N O P TOTAL 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0200 0210 0230 0250 0270 0300 0330 0360 0400 0440 637 642 684 685 703 715 741 743 743 754 842 843 845 548 556 569 587 600 626 651 540 546 635 637 607 615 557 549 558 557 616 629 642 826 833 873 892 846 854 879 443 450 585 590 752 767 688 698 705 708 942 948 952 891 914 950 969 813 840 865 710 720 710 714 308 312 497 503 505 513 394 396 398 477 491 556 576 483 583 608 601 612 659 664 714 732 814 815 816 833 899 901 902 471 471 537 538 454 476 477 494 505 607 615 504 515 542 528 543 539 547 569 591 376 377 461 464 952 991 993 –– –– –– –– 774 800 668 662 674 678 1026 1033 1038 548 556 569 587 783 822 856 –– –– –– –– 318 323 603 605 607 621 409 411 413 912 919 939 958 555 607 578 –– –– –– –– –– –– –– –– –– –– –– –– –– 1066 1077 1139 1158 600 626 651 –– –– –– –– –– –– –– –– –– –– –– –– –– 362 370 467 486 846 854 879 –– –– –– –– –– –– –– –– –– –– –– –– –– 958 958 1051 1052 813 840 865 –– –– –– –– –– –– –– –– –– –– –– –– –– 428 429 461 464 483 583 608 –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 454 476 477 –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 952 991 993 –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 783 822 856 –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 555 607 578 3,426 3,475 3,880 3,905 4,679 4,780 5,109 5,102 5,152 5,202 5,676 5,731 5,781 7,863 7,952 8,571 8,732 10,973 11,596 11,816 ISOLATOR TYPE & SIZE AWMR-1-53 AWMR-1-530 AWMR-1-531 AWMR-1-532 AWMR-1-551 AWMR-1-552 AWMR-1-553 AWMR-2-520 AWMR-2-521 AWMR-2-53 AWMR-1-530 AWMR-2-531 AWMR-2-532 72 MAX LOAD lbs. kg 1000 1150 1276 1500 1676 1900 2200 1300 1552 2000 2300 2552 3000 453.6 521.6 578.8 680.4 760.2 861.8 997.9 589.7 704.0 907.2 1043.3 1157.6 1360.8 DEFL. in. mm 2 2 2 2 2 2 2 2 2 2 2 2 2 51 51 51 51 51 51 51 51 51 51 51 51 51 ISOLATOR TYPE & SIZE CP-2-25 CP-2-26 CP-2-27 CP-2-28 CP-2-31 CP-2-32 CP-2-35 MAX LOAD lbs. kg 900 1200 1500 1800 2200 2600 3000 408.2 544.3 680.4 816.4 997.9 1179.3 1360.8 DEFL. in. mm 1.22 1.17 1.06 1.02 0.83 0.74 0.70 30.9 29.7 26.9 25.9 21.0 18.7 17.7 SPRING COLOR Red Purple Orange Green Gray White Gold YORK INTERNATIONAL FORM 201.18-EG1 Isolator Selection – Aluminum Fin Coils 60 HERTZ, ALUMINUM FINS, 1" ISOLATOR SELECTIONS – VMC TYPE CP-2-XX YCAS 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0200 0210 0230 0250 0270 0300 0330 0360 0400 0440 A 27 27 28 28 31 31 31 31 31 31 31 31 31 27 27 27 27 28 28 28 B 26 27 27 27 28 28 28 28 28 28 28 28 28 31 31 31 31 31 31 31 C 26 26 27 27 31 31 31 31 31 31 32 32 32 32 32 31 31 31 31 31 D 28 28 28 28 26 26 27 27 27 27 26 26 26 26 26 27 27 27 27 27 E 27 27 27 27 31 31 31 31 31 31 32 32 32 26 26 27 27 26 26 26 F 26 26 27 27 27 27 27 27 27 27 28 28 28 26 26 26 26 31 31 31 G –– –– –– –– 31 31 31 31 31 31 35 35 35 27 27 27 27 31 31 31 H –– –– –– –– 26 26 28 28 28 28 26 26 26 31 31 31 31 27 27 27 I –– –– –– –– –– –– –– –– –– –– –– –– –– 32 32 32 32 28 28 28 J –– –– –– –– –– –– –– –– –– –– –– –– –– 26 26 26 26 31 31 31 K –– –– –– –– –– –– –– –– –– –– –– –– –– 31 31 32 32 31 31 31 L –– –– –– –– –– –– –– –– –– –– –– –– –– 26 26 26 26 27 27 27 M –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 26 26 26 N –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 31 31 31 O –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 31 31 31 P –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 27 27 27 60 HERTZ, ALUMINUM FINS, NEOPRENE MOUNT SELECTIONS – VMC TYPE RD-4 YCAS 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0200 0210 0230 0250 0270 0300 0330 0360 0400 0440 A B C D E F BLACK BLACK RED RED RED RED RED RED RED RED RED RED RED BLACK BLACK BLACK BLACK RED RED RED BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK RED RED RED RED RED RED RED GRAY* GRAY* BLACK BLACK RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED GREEN* GREEN* BLACK BLACK BLACK BLACK GRAY* GRAY* GRAY* BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK RED RED RED RED RED RED RED RED RED BLACK BLACK BLACK BLACK BLACK BLACK BLACK GRAY* BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK RED RED RED G –– –– –– –– H –– –– –– –– I –– –– –– –– –– –– –– –– –– –– –– –– –– J –– –– –– –– –– –– –– –– –– –– –– –– –– RED GREEN* RED GREEN* BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK GREEN GRAY* GREEN GRAY* GREEN GRAY* BLACK RED GREEN BLACK BLACK RED GREEN BLACK BLACK RED GREEN BLACK BLACK RED GREEN BLACK RED BLACK BLACK RED RED BLACK BLACK RED RED BLACK BLACK RED K –– –– –– –– –– –– –– –– –– –– –– –– –– L –– –– –– –– –– –– –– –– –– –– –– –– –– RED RED GREEN GREEN RED RED RED BLACK BLACK BLACK BLACK BLACK BLACK BLACK M –– –– –– –– –– –– –– –– –– –– –– –– –– N –– –– –– –– –– –– –– –– –– –– –– –– –– O –– –– –– –– –– –– –– –– –– –– –– –– –– P –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– BLACK BLACK BLACK –– –– RED RED RED –– –– RED RED RED –– –– BLACK BLACK BLACK * VMC TYPE RD-3 60 HERTZ, ALUMINUM FINS, SEISMIC ISOLATOR SELECTIONS - VMC MODEL # AWMR-X-XXX YCAS 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0200 0210 0230 0250 0270 0300 0330 0360 0400 0440 A -1-532 -1-532 -1-551 -1-551 -1-552 -1-552 -1-552 -1-552 -1-552 -1-552 -1-553 -1-553 -1-553 -1-532 -1-532 -1-532 -1-532 -1-551 -1-551 -1-551 B -1-531 -1-531 -1-532 -1-532 -1-551 -1-551 -1-551 -1-551 -1-551 -1-551 -1-551 -1-551 -1-551 -1-553 -1-553 -2-530 -2-530 -1-553 -1-553 -1-553 YORK INTERNATIONAL C -1-53 -1-53 -1-532 -1-532 -1-552 -1-552 -1-552 -1-552 -1-552 -1-552 -2-531 -2-531 -2-531 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 D -1-551 -1-551 -1-551 -1-551 -1-53 -1-53 -1-532 -1-532 -1-532 -1-532 -1-530 -1-530 -1-530 -1-531 -1-531 -2-521 -2-521 -1-532 -2-521 -2-521 E -1-532 -1-532 -1-532 -1-532 -1-552 -1-552 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 -1-531 -1-531 -1-532 -1-532 -2-520 -2-520 -2-520 F -1-530 -1-530 -1-532 -1-532 -1-532 -1-532 -1-532 -1-532 -1-532 -1-532 -1-532 -1-532 -1-532 -1-53 -1-53 -1-531 -1-531 -1-553 -1-553 -1-553 G –– –– –– –– -1-553 -1-553 -1-552 -1-552 -1-552 -1-552 -2-531 -2-531 -2-531 -1-532 -1-532 -1-532 -1-532 -1-553 -1-553 -1-553 H –– –– –– –– -1-53 -1-53 -1-532 -1-532 -1-532 -1-532 -1-530 -1-530 -1-530 -1-553 -1-553 -1-553 -1-553 -2-521 -2-521 -2-521 I –– –– –– –– –– –– –– –– –– –– –– –– –– -2-531 -2-531 -2-531 -2-531 -1-551 -1-551 -1-551 J –– –– –– –– –– –– –– –– –– –– –– –– –– -1-53 -1-53 -2-520 -2-520 -1-553 -1-553 -1-553 K –– –– –– –– –– –– –– –– –– –– –– –– –– -1-553 -1-553 -2-531 -2-531 -1-553 -1-553 -1-553 L –– –– –– –– –– –– –– –– –– –– –– –– –– -1-530 -1-530 -1-531 -1-531 -1-531 -2-521 -2-521 M –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– -2-520 -2-520 -2-520 N O P –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– -1-553 -1-553 -2-521 -1-553 -1-553 -2-521 -1-553 -1-553 -2-521 73 Operating Weights – Copper Fin Coils COPPER FIN COIL WEIGHT DISTRIBUTION BY MODEL ( LBS ) YCAS 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0200 0210 0230 0250 0270 0300 0330 0360 0400 0440 A 1,532 1,543 1,606 1,608 1,656 1,682 1,740 1,743 1,745 1,768 1,988 1,990 1,993 1,315 1,331 1,364 1,405 1,434 1,504 1,559 B 1,329 1,342 1,557 1,564 1,515 1,532 1,403 1,386 1,407 1,403 1,558 1,586 1,614 1,989 2,005 2,108 2,151 2,040 2,060 2,116 C 1,126 1,141 1,509 1,519 1,833 1,868 1,693 1,714 1,730 1,737 2,318 2,328 2,337 2,132 2,183 2,279 2,322 1,966 2,029 2,085 D 1,689 1,711 1,660 1,668 853 863 1,270 1,284 1,289 1,307 1,092 1,096 1,100 1,204 1,235 1,411 1,454 1,191 1,463 1,519 E 1,465 1,488 1,610 1,622 1,679 1,720 1,900 1,902 1,904 1,942 2,115 2,117 2,120 1,191 1,193 1,367 1,371 1,096 1,155 1,158 F 1,241 1,266 1,560 1,576 1,287 1,312 1,370 1,339 1,374 1,364 1,407 1,453 1,502 1,031 1,033 1,276 1,281 2,272 2,381 2,386 G –– –– –– –– 1,883 1,940 1,648 1,636 1,661 1,670 2,502 2,517 2,528 1,315 1,331 1,364 1,405 1,901 2,009 2,014 H –– –– –– –– 875 886 1,505 1,509 1,514 1,544 1,125 1,129 1,133 2,178 2,195 2,254 2,296 1,462 1,605 1,611 I –– –– –– –– –– –– –– –– –– –– –– –– –– 2,519 2,542 2,696 2,739 1,434 1,504 1,559 J –– –– –– –– –– –– –– –– –– –– –– –– –– 951 970 1,214 1,257 2,040 2,060 2,116 K –– –– –– –– –– –– –– –– –– –– –– –– –– 2,265 2,267 2,501 2,505 1,966 2,029 2,085 L –– –– –– –– –– –– –– –– –– –– –– –– –– 1,145 1,146 1,276 1,281 1,191 1,463 1,519 M –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 1,096 1,155 1,158 N –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 2,272 2,381 2,386 O P –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 1,901 1,462 2,009 1,605 2,014 1,611 TOTAL 8,382 8,491 9,502 9,557 11,581 11,803 12,529 12,513 12,624 12,735 14,105 14,216 14,327 19,235 19,431 21,111 21,466 26,722 28,411 28,896 YCAS A B C D E F G H I J K L M N O P TOTAL 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0200 0210 0230 0250 0270 0300 0330 0360 0400 0440 695 700 728 729 751 763 789 791 792 802 902 903 904 596 604 619 637 650 682 707 603 609 706 709 687 695 636 629 638 636 707 719 732 902 909 956 976 925 934 960 511 518 684 689 831 847 768 777 785 788 1051 1056 1060 967 990 1,034 1,053 892 920 946 766 776 753 757 387 391 576 582 585 593 495 497 499 546 560 640 660 540 663 689 665 675 730 736 762 780 862 863 864 881 959 960 962 540 541 620 622 497 524 525 563 574 708 715 584 595 621 607 623 619 638 659 681 468 468 579 581 1,030 1,080 1,082 –– –– –– –– 854 880 748 742 753 757 1135 1142 1147 596 604 619 637 862 911 913 –– –– –– –– 397 402 683 684 687 700 510 512 514 988 995 1,022 1,042 663 728 731 –– –– –– –– –– –– –– –– –– –– –– –– –– 1,142 1,153 1,223 1,242 650 682 707 –– –– –– –– –– –– –– –– –– –– –– –– –– 431 440 551 570 925 934 960 –– –– –– –– –– –– –– –– –– –– –– –– –– 1,027 1,028 1,134 1,136 892 920 946 –– –– –– –– –– –– –– –– –– –– –– –– –– 519 520 579 581 540 663 689 –– –– –– –– –– –– –– –– –– –– –– –– –– 0 0 0 0 497 524 525 –– –– –– –– –– –– –– –– –– –– –– –– –– 0 0 0 0 1,030 1,080 1,082 –– –– –– –– –– –– –– –– –– –– –– –– –– 0 0 0 0 862 911 913 –– –– –– –– –– –– –– –– –– –– –– –– –– 0 0 0 0 663 728 731 3,802 3,851 4,310 4,335 5,253 5,354 5,683 5,676 5,726 5,776 6,398 6,448 6,499 8,725 8,814 9,576 9,737 12,121 12,887 13,107 COPPER FIN COIL WEIGHT DISTRIBUTION BY MODEL ( KGS ) 74 YORK INTERNATIONAL FORM 201.18-EG1 Isolator Selection – Copper Fin Coils 60 HERTZ, COPPER FINS, 1" ISOLATOR SELECTIONS – VMC TYPE CP-2-XX YCAS 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0200 0210 0230 0250 0270 0300 0330 0360 0400 0440 A 28 28 28 28 31 31 31 31 31 31 32 32 32 28 28 28 28 28 28 28 B 27 27 28 28 31 31 28 28 28 28 31 31 31 31 31 31 31 31 31 31 C 26 26 28 28 31 31 31 31 31 31 35 35 35 31 31 32 32 31 31 31 D 28 28 28 28 26 26 28 28 28 28 27 27 27 27 27 28 28 27 28 28 E 27 27 28 28 31 31 31 31 31 31 32 32 32 27 27 28 28 27 27 27 F 27 27 28 28 28 28 28 28 28 28 28 28 28 26 26 27 27 32 32 32 G H I J K L M N O P — — — — — — — — 32 32 32 32 32 32 35 35 35 27 27 28 28 31 31 31 26 26 31 31 31 31 27 27 27 31 31 32 32 28 31 31 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 32 32 32 32 28 28 28 26 26 27 27 31 31 31 32 32 32 32 31 31 31 27 27 27 27 27 28 28 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 27 27 27 32 32 32 31 31 31 28 31 31 YCAS 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0200 0210 0230 0250 0270 0300 0330 0360 0400 0440 A B C D E F G H I J K L M N O P RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED BLACK BLACK RED RED RED RED BLACK BLACK BLACK BLACK RED RED RED RED RED RED RED RED RED RED BLACK BLACK RED RED RED RED RED RED RED RED GREEN RED GREEN RED RED GREEN GREEN RED RED RED RED RED RED RED GRAY* GRAY* BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK RED RED BLACK RED RED BLACK BLACK RED RED RED RED RED RED RED RED RED RED RED BLACK BLACK RED RED BLACK BLACK BLACK BLACK BLACK RED RED BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK RED BLACK BLACK BLACK BLACK GREEN GREEN GREEN — — — — RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED RED — — — — GRAY* GRAY* RED RED RED RED BLACK BLACK BLACK RED RED GREEN GREEN RED RED RED — — — — — — — — — — — — — GREEN GREEN GREEN GREEN RED RED RED — — — — — — — — — — — — — BLACK BLACK BLACK BLACK RED RED RED — — — — — — — — — — — — — GREEN GREEN GREEN GREEN RED RED RED — — — — — — — — — — — — — BLACK BLACK BLACK BLACK BLACK RED RED — — — — — — — — — — — — — — — — — BLACK BLACK BLACK — — — — — — — — — — — — — — — — — GREEN GREEN GREEN — — — — — — — — — — — — — — — — — RED RED RED — — — — — — — — — — — — — — — — — RED RED RED 60 HERTZ, COPPER FINS, NEOPRENE MOUNT SELECTIONS – VMC TYPE RD-4 * VMC TYPE RD-3 60 HERTZ, COPPER FINS, SEISMIC ISOLATOR SELECTIONS - VMC MODEL # AWMR-X-XXX YCAS 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0200 0210 0230 0250 0270 0300 0330 0360 0400 0440 A -1-551 -1-551 -1-551 -1-551 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 -1-551 -1-551 -1-551 -1-551 -1-551 -1-552 -1-552 B -1-532 -1-532 -1-551 -1-551 -1-552 -1-552 -1-552 -1-552 -1-552 -1-552 -1-552 -1-552 -1-552 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 YORK INTERNATIONAL C -1-530 -1-530 -1-551 -1-551 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 -2-532 -2-532 -2-532 -1-553 -1-553 -2-531 -2-531 -1-553 -1-553 -1-553 D -1-552 -1-552 -1-551 -1-551 -1-530 -1-530 -1-532 -1-532 -1-532 -1-532 -1-532 -1-532 -1-532 -1-532 -1-532 -2-53 -2-53 -1-532 -2-53 -2-53 E -1-532 -1-532 -1-551 -1-551 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 -1-532 -1-532 -1-532 -1-532 -2-520 -2-521 -2-521 F -1-531 -1-531 -1-551 -1-551 -1-532 -1-532 -1-532 -1-532 -1-532 -1-532 -1-552 -1-552 -1-552 -1-531 -1-531 -1-532 -1-532 -2-530 -2-531 -2-531 G H I J K L M N O P — — — — — — — — -1-553 -1-553 -1-553 -1-553 -1-553 -1-553 -2-532 -2-532 -2-532 -1-551 -1-551 -1-551 -1-551 -1-553 -1-553 -1-553 -1-530 -1-530 -1-552 -1-552 -1-552 -1-552 -1-532 -1-532 -1-532 -1-553 -1-553 -2-530 -2-530 -2-53 -2-53 -2-53 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — -2-531 -2-531 -2-532 -2-532 -1-551 -1-552 -1-552 -1-530 -1-530 -2-521 -2-521 -1-553 -1-553 -1-553 -2-530 -2-530 -2-531 -2-531 -1-553 -1-553 -1-553 -1-532 -1-532 -1-532 -1-532 -1-532 -2-53 -2-53 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — -2-520 -2-521 -2-521 -2-530 -1-553 -2-53 -2-531 -1-553 -2-53 -2-531 -1-553 -2-53 75 Isolator Details R3 / RD3 SERIES R4 / RD4 SERIES LD04033 LD04805 LD04737 LD04804 DIMENSIONS: Inches (mm) TYPE R-3 or RD-3 R-4 or RD-4 76 L 5.5" (139.7) 6.25" (158.7) W 3.375" (85.8) 4.625" (117.6) HD 2.875" (73.2) 2.75" (69.8) A 2.5" (63.5) 3.0" (76.2) B 0.5" (12.7) 0.5" (12.7) C 4.125" (104.8) 5.0" (127.0) D 0.563" (14.4) 0.563" (14.4) E 0.25" (6.3) 0.375" (9.6) YORK INTERNATIONAL FORM 201.18-EG1 LD01089 CP-2-XX LD02974 LD02973 AWMR-1-XXX AWMR-2-XXX DIMENSIONS – (In.) A AWMR-1 50-553 AWMR-2 50-553 B C 10-1/2 6 3 15 6 3 YORK INTERNATIONAL D 5/8 11NC 3/4 10NC E F G H I J K L M 3/4 3-1/2 1-3/4 1/2 9 5/8 8-1/2 4-1/4 10-1/2 1 7-1/2 3-3/4 1/2 9-1/2 5/8 14-1/2 7-1/4 17 N/X 3/4 5/8 3/4 5/8 77 Electrical Data MULTIPLE POINT POWER SUPPLY CONNECTION - 2 COMPRESSOR UNITS (SEE FIG. 1) (Each of Two Field Provided Power Supply Circuits individually protected with Branch Circuit Protection. Field Connections to Factory provided Terminal Block (Std), Disconnects (Opt), or Individual System Breakers (Opt) in each of the two Motor Control Centers.) SYSTEM #1 FIELD-SUPPLIED WIRING FIELD PROVIDED POWER SUPPLY FACTORY PROVIDED (LUGS) WIRE RANGE7 OVER-CURRENT MODEL VOLTS MIN NF PROTECTION YCAS MCA1 STD. TERMINAL OPT. NF. OPT. C.B. DISC SW2, 9 MIN.3, 5 MAX.4, 6 BLOCK DISC SW. 200 224 250 300 350 # 2 - 300 # 6 - 350 250 - 500 230 196 200 250 300 # 2 - 300 # 14 - 250 # 14 - 250 0090EC 380 120 150 150 200 # 2 - 4/0 # 14 - 250 # 14 - 250 460 100 100 125 150 # 6 - 1/0 # 14 - 250 # 14 - 250 575 79 100 100 125 # 18 - # 2 # 14 - 250 # 14 - 250 200 235 250 300 400 1/0 - 500 # 14 - 250 250 - 500 230 206 200 250 350 # 2 - 300 # 6 - 350 250 - 500 0100EC 380 125 150 150 200 # 2 - 4/0 # 14 - 250 # 14 - 250 460 104 100 125 175 # 6 - 1/0 # 14 - 250 # 14 - 250 575 82 100 100 125 # 18 - # 2 # 14 - 250 # 14 - 250 200 321 400 400 500 1/0 - 500 250 - 500 250 - 500 230 279 400 350 450 1/0 - 500 250 - 500 250 - 500 0110EC 380 167 200 200 250 # 2 - 4/0 # 14 - 250 # 14 - 250 460 139 150 175 225 # 2 - 4/0 # 14 - 250 # 14 - 250 575 113 150 150 175 # 2 - 4/0 # 14 - 250 # 14 - 250 200 345 400 450 500 1/0 - 500 (2) 3/0 - 250 (3) 2/0 - 400 230 299 400 400 500 1/0 - 500 250 - 500 250 - 500 0120EC 380 179 200 225 300 # 2 - 4/0 # 14 - 250 # 14 - 250 460 149 150 200 250 # 2 - 4/0 # 14 - 250 # 14 - 250 575 121 150 150 200 # 2 - 4/0 # 14 - 250 # 14 - 250 200 340 400 450 500 (2)1/0 - 300 (2) 3/0-250 (3) 2/0-400 230 299 400 400 500 2/0 - (2) 4/0 (2) 3/0-250 (2) 3/0-250 0130EC 380 181 200 225 300 1/0 - 300 # 6 - 350 # 6 - 350 460 150 150 200 250 # 2 - 4/0 # 4 - 300 # 6 - 350 575 119 150 150 200 # 2 - 4/0 # 4 - 300 # 4 - 300 200 366 400 450 600 (2) 1/0 - 300 (2) 3/0-250 (3) 2/0-400 230 321 400 400 500 2/0 - (2) 4/0 (2) 3/0-250 (2) 3/0-250 0140EC 380 195 200 250 300 1/0 - 300 # 6 - 350 # 6 - 350 460 161 200 200 250 # 2 - 4/0 # 4 - 300 # 4 - 300 575 128 150 175 200 # 2 - 4/0 # 4 - 300 # 6 - 350 200 402 400 500 600 (2) 2/0 - 500 (2) 3/0-250 (3) 2/0-400 230 351 400 450 600 (2) 1/0 - 300 (2) 3/0-250 (3) 2/0-400 0150EC 380 213 250 300 350 2/0 - 500 # 6 - 350 (2) 3/0-250 460 176 200 225 300 1/0 - 300 # 4 - 300 # 6 - 350 575 141 150 175 225 # 2 - 4/0 # 4 - 300 # 6 - 350 200 402 400 500 600 (2) 2/0 - 500 (2) 3/0-250 (3) 2/0-400 230 351 400 450 600 (2) 1/0 - 300 (2) 3/0-250 (3) 2/0-400 0160EC 380 213 250 300 350 # 1 - 300 # 6 - 350 (2) 3/0-250 460 176 200 225 300 1/0 - 300 # 6 - 350 # 6 - 350 575 141 150 175 225 # 2 - 4/0 # 4 - 300 # 6 - 350 200 434 600 600 700 (2) 2/0 - 500 (3) 2/0-400 (3) 2/0-400 230 380 400 450 600 (2) # 1 - 300 (2) 3/0-250 (3) 2/0-400 0170EC 380 230 250 300 350 2/0 - 500 # 6 - 350 (2) 3/0-250 460 191 200 250 300 1/0 - 300 # 6 - 350 # 6 - 350 575 152 150 200 250 # 2 - 4/0 # 4 - 300 # 6 - 350 200 434 600 600 700 (2) 2/0 - 500 (3) 2/0-400 (3) 2/0-400 230 380 400 450 600 (2) 2/0 - 500 (2) 3/0-250 (3) 2/0-400 0180EC 380 230 250 300 350 2/0 - 500 # 6 - 350 (2) 3/0-250 460 191 200 250 300 1/0 - 300 # 6 - 350 # 6 - 350 575 152 150 200 250 # 2 - 4/0 # 4 - 300 # 6 - 350 200 469 600 600 800 (2) 2/0 - 500 (3) 2/0-400 (3) 2/0-400 230 412 400 500 700 (2) 2/0 - 500 (2) 3/0-250 (3) 2/0-400 0200EC 380 250 250 300 400 2/0 - 500 # 6 - 350 (2) 3/0-250 460 206 200 250 350 # 1 - 300 # 6 - 350 # 6 - 350 575 164 200 200 250 1/0 - 300 # 6 - 350 # 6 - 350 200 509 600 700 800 (2) 2/0 - 500 (3) 2/0-400 (3) 2/0-400 230 445 600 600 700 (2) 2/0 - 500 (3) 2/0-400 (3) 2/0-400 0210EC 380 270 400 350 450 2/0 - 500 (2) 3/0-250 (2) 3/0-250 460 224 250 300 350 2/0 - 500 # 6 - 350 (2) 3/0-250 575 178 200 225 300 1/0 - 300 # 6 - 350 # 6 - 350 200 509 600 700 800 (2) 2/0 - 500 (3) 2/0-400 (3) 2/0-400 230 445 600 600 700 (2) 2/0 - 500 (3) 2/0-400 (3) 2/0-400 0230EC 380 270 400 350 450 2/0 - 500 (2) 3/0-250 (2) 3/0-250 460 224 250 300 350 2/0 - 500 # 6 - 350 (2) 3/0-250 575 178 200 225 300 1/0 - 300 # 6 - 350 # 6 - 350 FANS11, 12 COMPRESSOR RLA Y-LRA FLA LRA X-LRA QTY (EA.) (EA.) 159 138 84 70 55 168 146 88 73 58 228 199 121 99 81 247 215 130 107 87 246 214 130 107 86 267 232 140 116 93 295 256 155 128 103 295 256 155 128 103 321 279 169 140 112 321 279 169 140 112 342 298 181 149 119 374 325 197 163 130 374 325 197 163 130 1257 1103 681 542 431 1257 1103 681 542 431 1866 1518 900 719 574 1866 1518 900 719 574 1866 1518 900 719 574 1866 1518 900 719 574 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 404 354 219 174 138 404 354 219 174 138 591 481 285 228 182 591 481 285 228 182 591 481 285 228 182 591 481 285 228 182 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 12.0 10.0 5.2 5.0 3.9 12.0 10.0 5.2 5.0 3.9 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 52.0 62.0 21.0 27.0 26.0 52.0 62.0 21.0 27.0 26.0 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 See page 89 for Electrical Data footnotes. 78 YORK INTERNATIONAL FORM 201.18-EG1 SYSTEM #2 FIELD-SUPPLIED WIRING FIELD PROVIDED POWER SUPPLY FACTORY PROVIDED (LUGS) WIRE RANGE7 MODEL OVER-CURRENT VOLTS MIN NF YCAS MCA1 STD. TERMINAL OPT. NF. PROTECTION OPT. C.B. DISC SW2, 9 MIN.3, 5 MAX.4, 6 BLOCK DISC SW. 200 224 250 300 350 # 2 - 300 # 6 - 350 250 - 500 230 196 200 250 300 # 2 - 300 # 14 - 250 # 14 - 250 0090EC 380 120 150 150 200 # 2 - 4/0 # 14 - 250 # 14 - 250 460 100 100 125 150 # 6 - 1/0 # 14 - 250 # 14 - 250 575 79 100 100 125 # 18 - 2 # 14 - 250 # 14 - 250 200 235 250 300 400 1/0 - 500 # 14 - 250 250 - 500 230 206 200 250 350 # 2 - 300 # 6 - 350 250 - 500 0100EC 380 125 150 200 200 # 2 - 4/0 # 14 - 250 # 14 - 250 460 104 100 125 175 # 6 - 1/0 # 14 - 250 # 14 - 250 575 82 100 100 125 # 18 - 2 # 14 - 250 # 14 - 250 200 241 250 300 400 1/0 - 500 # 6 - 350 250 - 500 230 209 200 250 350 # 2 - 300 # 14 - 250 250 - 500 0110EC 380 124 150 150 200 # 2 - 4/0 # 14 - 250 # 14 - 250 460 104 100 125 150 # 6 - 1/0 # 14 - 250 # 14 - 250 575 82 100 100 125 # 18 - 2 # 14 - 250 # 14 - 250 200 241 250 300 400 1/0 - 500 # 6 - 350 250 - 500 230 209 200 250 350 # 2 - 300 # 14 - 250 250 - 500 0120EC 380 124 150 150 200 # 6- 1/0 # 14 - 250 # 14 - 250 460 104 125 125 150 # 2 - 4/0 # 14 - 250 # 14 - 250 575 82 100 100 125 18 - 2 # 14 - 250 # 14 - 250 200 343 400 450 500 (2) 1/0 - 300 (2) 3/0-250 (3) 2/0-400 230 298 400 400 500 2/0 - (2) 4/0 (2) 3/0-250 (2) 3/0-250 0130EC 380 180 200 225 300 1/0 - 300 # 6 - 350 # 6 - 350 460 149 150 200 250 # 2 - 4/0 # 4 - 300 # 6 - 350 575 119 150 150 200 # 2 - 4/0 # 4 - 300 # 4 - 300 200 368 400 450 600 (2) 1/0 - 300 (2) 3/0-250 (3) 2/0-400 230 320 400 400 500 2/0 - (2) 4/0 (2) 3/0-250 (2) 3/0-250 0140EC 380 194 200 250 300 1/0 - 300 # 6 - 350 # 6 - 350 460 160 200 200 250 # 2 - 4/0 # 4 - 300 # 6 - 350 575 128 150 175 200 # 2 - 4/0 # 4 - 300 # 4 - 300 200 366 400 450 600 (2) 1/0 - 300 (2) 3/0-250 (3) 2/0-400 230 318 400 400 500 (2) 1/0 - 300 (2) 3/0-250 (2) 3/0-250 0150EC 380 192 200 250 300 1/0 - 300 # 6 - 350 # 6 - 350 460 159 150 200 250 1/0 - 300 # 6 - 350 # 6 - 350 575 127 150 175 200 # 2 - 4/0 # 4 - 300 # 4 - 300 200 404 400 500 600 (2) 2/0 - 500 (2) 3/0-250 (3) 2/0-400 230 350 400 450 600 (2) 1/0 - 300 (2) 3/0-250 (3) 2/0-400 0160EC 380 212 200 300 350 2/0 - 500 # 6 - 350 (2) 3/0-250 460 175 200 225 300 1/0 - 300 # 6 - 350 # 6 - 350 575 141 150 175 225 # 2 - 4/0 # 4 - 300 # 6 - 350 200 404 400 500 600 (2) 2/0 - 500 (2) 3/0-250 (3) 2/0-400 230 350 400 450 600 (2) 1/0 - 300 (2) 3/0-250 (3) 2/0-400 0170EC 380 212 200 300 350 # 1 - 300 # 6 - 350 (2) 3/0-250 460 175 200 225 300 1/0 - 300 # 6 - 350 # 6 - 350 575 141 150 175 225 # 2 - 4/0 # 4 - 300 # 6 - 350 200 436 600 600 700 (2) 2/0 - 500 (3) 2/0-400 (3) 2/0-400 230 379 400 450 600 (2) 2/0 - 500 (2) 3/0-250 (3) 2/0-400 0180EC 380 230 250 300 350 2/0 - 500 # 6 - 350 (2) 3/0-250 460 190 200 250 300 1/0 - 300 # 6 - 350 # 6 - 350 575 152 150 200 250 # 2 - 4/0 # 4 - 300 # 6 - 350 200 471 600 600 800 (2) 2/0 - 500 (3) 2/0-400 (3) 2/0-400 230 411 400 500 700 (2) 2/0 - 500 (2) 3/0-250 (3) 2/0-400 0200EC 380 249 250 300 400 2/0 - 500 # 6 - 350 (2) 3/0-250 460 205 200 250 350 2/0 - 500 # 6 - 350 # 6 - 350 575 164 200 200 250 1/0 - 300 # 6 - 350 # 6 - 350 200 471 600 600 800 (2) 2/0 - 500 (3) 2/0-400 (3) 2/0-400 230 411 400 500 700 (2) 2/0 - 500 (2) 3/0-250 (3) 2/0-400 0210EC 380 249 250 300 400 2/0 - 500 # 6 - 350 (2) 3/0-250 460 205 200 250 350 # 1 -300 # 6 - 350 # 6 - 350 575 164 200 200 250 1/0 - 300 # 4 - 300 # 6 - 350 200 511 600 700 800 (2) 2/0 - 500 (3) 2/0-400 (3) 2/0-400 230 444 600 600 700 (2) 2/0 - 500 (3) 2/0-400 (3) 2/0-400 0230EC 380 269 400 350 450 2/0 - 500 (2) 3/0-250 (2) 3/0-250 460 223 250 300 350 2/0 - 500 # 6 - 350 (2) 3/0-250 575 178 200 225 300 1/0 - 300 # 6 - 350 # 6 - 350 YORK INTERNATIONAL FANS11, 12 COMPRESSOR RLA Y-LRA FLA X-LRA QTY (EA.) LRA (EA.) 159 138 84 70 55 168 146 88 73 58 164 143 86 71 56 164 143 86 71 56 246 214 130 107 86 267 232 140 116 93 265 230 139 115 92 295 256 155 128 103 295 256 155 128 103 321 279 169 140 112 342 298 181 149 119 342 298 181 149 119 374 325 197 163 130 1257 1103 681 542 431 1257 1103 681 542 431 1257 1103 681 542 431 1257 1103 681 542 431 1866 1518 900 719 574 1866 1518 900 719 574 1866 1518 900 719 574 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 52.0 62.0 21.0 27.0 26.0 52.0 62.0 21.0 27.0 26.0 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 404 354 219 174 138 404 354 219 174 138 404 354 219 174 138 404 354 219 174 138 591 481 285 228 182 591 481 285 228 182 591 481 285 228 182 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 12.0 10.0 5.2 5.0 3.9 12.0 10.0 5.2 5.0 3.9 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 79 Electrical Data (Continued) MULTIPLE POINT POWER SUPPLY CONNECTION - 3 & 4 COMPRESSOR UNITS (SEE FIG. 5 or FIG. 6) (Two Field Provided Power Supply Circuits to the Chiller. Field Connections to Factory provided Terminal Block (Std) or Disconnects (Opt) in the Options Panel, or Individual System Circuit Breakers (Opt10) in each of the two Motor Control Centers.) CHILLER MODEL YCAS VOLTS 0250EC 0270EC 0300EC 0330EC 0360EC 0400EC 0440EC FIELD PROVIDED POWER SUPPLY OVER-CURRENT PROTECTION MIN.3, 5 MAX.4, 6 ELECTRICAL SYSTEM #1 FIELD SUPPLIED WIRING FACTORY PROVIDED (LUGS) COMPRESSOR #1 COMPRESSOR #3 WIRE RANGE7 FAN11, 12 DATA MCA1 MIN NF DISC SW2, 9 STANDARD OPTIONAL NF ∆ LRA X-LRA RLA Y-∆ ∆ LRA X-LRA QTY FLA(EA) LRA(EA) RLA Y-∆ TERMINAL BLOCK DISC. SWITCH 380 387 400 450 500 (2) # 2-300 (2) 3/0-250 155 343 1,093 155 343 1,093 8 4.8 23.0 460 320 400 400 400 (1)2/0-(2)4/0 (2) 3/0-250 128 280 893 128 280 893 8 4.0 19.0 575 257 400 300 350 (1)2/0-(2)4/0 (2) 3/0-250 103 224 714 103 224 714 8 3.1 15.2 380 477 600 600 700 (2) # 2-300 (2) 250-500 155 343 1,093 227 343 1,093 8 4.8 23.0 460 390 400 450 500 (2) # 2-300 (2) 3/0-250 128 280 893 184 280 893 8 4.0 19.0 575 312 400 350 450 (1)2/0-(2)4/0 (2) 3/0-250 103 224 714 147 224 714 8 3.1 15.2 380 473 600 600 600 (2) # 2-300 (2) 250-500 181 343 1,093 199 343 1,093 9 4.8 23.0 460 390 400 450 500 (2) # 2-300 (2) 3/0-250 149 280 893 164 280 893 9 4.0 19.0 575 311 400 350 400 (1)2/0-(2)4/0 (2) 3/0-250 119 224 714 131 224 714 9 3.1 15.2 380 524 600 600 700 (2)2/0-500 (2) 250-500 197 343 1,093 227 343 1,093 9 4.8 23.0 460 429 600 500 600 (2) # 2-300 (2) 250-500 163 280 893 184 280 893 9 4.0 19.0 575 342 400 400 500 (1)2/0-(2)4/0 (2) 3/0-250 130 224 714 147 224 714 9 3.1 15.2 380 442 600 500 600 (2) # 2-300 (2) 250-500 199 343 1,093 155 343 1,093 8 4.8 23.0 460 365 400 450 500 (1)2/0-(2)4/0 (2) 3/0-250 164 280 893 128 280 893 8 4.0 19.0 575 292 400 350 400 2/0 -500 (2) 3/0-250 131 224 714 103 224 714 8 3.1 15.2 380 473 600 600 600 (2) # 2-300 (2) 250-500 181 343 1,093 199 343 1,093 9 4.8 23.0 460 390 400 450 500 (2) # 2-300 (2) 3/0-250 149 280 893 164 280 893 9 4.0 19.0 575 311 400 350 400 2/0-500 (2) 3/0-250 119 224 714 131 224 714 9 3.1 15.2 380 524 600 600 700 (2)2/0-500 (2) 250-500 197 343 1,093 227 343 1,093 9 4.8 23.0 460 429 600 500 600 (2) # 2-300 (2) 250-500 163 280 893 184 280 893 9 4.0 19.0 575 342 400 400 450 (1)2/0-(2)4/0 (2) 3/0-250 130 224 714 147 224 714 9 3.1 15.2 See page 89 for Electrical Data footnotes. 80 YORK INTERNATIONAL FORM 201.18-EG1 FIELD PROVIDED POWER SUPPLY CHILLER MODEL OVER-CURRENT MIN NF YCAS VOLTS MCA1 PROTECTION13 DISC SW2,9 MIN.3, 5 MAX.4, 6 0250EC 0270EC 0300EC 0330EC 0360EC 0400EC 0440EC ELECTRICAL SYSTEM #2 FIELD SUPPLIED WIRING FACTORY PROVIDED (LUGS) COMPRESSOR #2 COMPRESSOR #4 WIRE RANGE FAN11, 12 DATA STANDARD OPTIONAL NF ∆ LRA X-LRA RLA Y-∆ ∆ LRA X-LRA QTY FLA(EA) LRA(EA) RLA Y-∆ TERMINAL BLOCK DISC. SWITCH 380 213 200 300 350 # 2-300 # 4-300 155 343 1,093 — — — 4 4.8 23.0 460 176 175 225 300 # 2-4/0 # 4-300 128 280 893 — — — 4 4.0 19.0 575 141 150 175 225 # 2-4/0 # 4-300 103 224 714 — — — 4 3.1 15.2 380 213 200 300 350 # 2-300 # 4-300 155 343 1,093 — — — 4 4.8 23.0 460 176 175 225 300 # 2-4/0 # 4-300 128 280 893 — — — 4 4.0 19.0 575 141 150 175 225 # 2-4/0 # 4-300 103 224 714 — — — 4 3.1 15.2 380 250 250 300 400 # 2-300 # 6-350 181 343 1,093 — — — 5 4.8 23.0 460 206 200 250 350 # 2-300 # 4-300 149 280 893 — — — 5 4.0 19.0 575 164 175 200 250 # 2-4/0 # 6-350 119 224 714 — — — 5 3.1 15.2 380 270 400 350 450 2/0-500 (2) 3/0-250 197 343 1,093 — — — 5 4.8 23.0 460 224 225 300 350 # 2-300 # 4-300 163 280 893 — — — 5 4.0 19.0 575 178 175 225 300 # 2-4/0 # 6-350 130 224 714 — — — 5 3.1 15.2 380 442 600 500 600 (2) 2-300 (2) 250-500 199 343 1,093 155 343 1,093 8 4.8 23.0 460 365 400 450 500 (1)2/0-(2)4/0 (2) 3/0-250 164 280 893 128 280 893 8 4.0 19.0 575 292 400 350 400 2/0-500 (2) 3/0-250 131 224 714 103 224 714 8 3.1 15.2 380 473 600 600 600 (2) # 2-300 (2) 250-500 181 343 1,093 199 343 1,093 9 4.8 23.0 460 390 400 450 500 (1)2/0-(2)4/0 (2) 3/0-250 149 280 893 164 280 893 9 4.0 19.0 575 311 400 350 400 2/0-500 (2) 3/0-250 119 224 714 131 224 714 9 3.1 15.2 380 524 600 600 700 (2)2/0-500 (2) 250-500 197 343 1,093 227 343 1,093 9 4.8 23.0 460 429 600 500 600 (2) # 2-300 (2) 250-500 163 280 893 184 280 893 9 4.0 19.0 575 342 400 400 450 (1)2/0-(2)4/0 (2) 3/0-250 130 224 714 147 224 714 9 3.1 15.2 YORK INTERNATIONAL 81 Electrical Data (Continued) OPTIONAL SINGLE-POINT POWER SUPPLY WITH INDIVIDUAL SYSTEM CIRCUIT BREAKERS – 2 COMPRESSOR UNITS (SEE FIG. 2) (One Field Provided Power Supply Circuit to the chiller. Field connections to Power Terminal Block or Non-Fused Disconnect in ‘Option Panel’. Individual Branch Circuit Protection (Breakers) per Motor Control Center10) CHILLER MODEL YCAS 0090EC 0100EC 0110EC 0120EC 0130EC 0140EC 0150EC 0160EC 0170EC 0180EC 0200EC 0210EC 0230EC VOLTS MCA1 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 407.0 358.0 218.0 182.0 143.0 428.0 376.0 227.0 189.0 150.0 521.0 452.0 269.0 225.0 181.0 545.0 472.0 280.0 235.0 189.0 619.3 543.9 329.8 272.8 217.4 665.9 584.4 354.3 293.0 233.6 698.9 612.4 371.4 307.0 245.6 729.4 638.4 387.2 320.0 256.6 761.9 667.2 404.7 335.0 267.8 787.9 690.2 418.7 347.0 276.8 851.5 748.5 455.3 375.3 298.8 891.5 782.3 475.3 392.8 312.5 923.5 809.3 491.3 406.8 323.5 FIELD PROVIDED POWER SUPPLY MIN NF OVER-CURRENT PROTECTION13 2, 9 DISC SW MIN.3, 5 MAX.4, 6 600 450 500 400 400 500 250 250 300 200 200 250 150 175 175 600 500 500 400 450 500 250 250 300 200 225 250 200 175 200 600 600 700 600 600 600 400 300 350 250 250 300 200 225 250 600 700 700 600 600 600 400 350 400 250 300 300 200 225 250 800 700 700 600 600 700 400 400 450 400 300 350 250 250 300 800 800 800 800 700 800 400 400 450 400 350 400 250 300 300 800 800 800 800 700 800 400 450 500 400 350 400 400 300 300 800 1000 800 800 800 800 600 450 500 400 400 400 400 300 300 800 1000 1000 800 800 800 600 450 500 400 400 400 400 300 350 1000 1000 1000 800 800 800 600 500 500 400 400 450 400 350 350 1000 1000 1000 800 1000 800 600 600 500 400 450 450 400 350 350 1000 1000 1000 1000 1000 1000 600 600 600 600 450 500 400 350 400 1000 1200 1200 1000 1000 1000 600 600 600 600 450 500 400 400 450 FIELD-SUPPLIED WIRING FACTORY PROVIDED (LUGS) WIRE RANGE 7 STANDARD OPTIONAL NF TERMINAL BLOCK DISC. SWITCH # 2 - 300 (3) 2/0 - 400 1/0 - 500 2/0 - 500 # 2 - 300 #2 - 300 # 2 - 4/0 # 14 - 250 # 2 - 4/0 # 14 - 250 # 2 - 300 (3) 2/0 - 400 1/0 - 500 (3) 2/0 - 400 # 2 - 300 250 - 500 # 2 - 4/0 # 14 - 250 # 2 - 4/0 # 14 - 250 1/0 - 500 (3) 2/0 - 400 # 2 - 300 (3) 2/0 - 400 1/0 - 500 250 - 500 # 2 - 300 # 14 - 250 # 2 - 4/0 # 14 - 250 1/0 - 500 (2) 250 - 500 # 2 - 300 (3) 2/0 - 400 1/0 - 500 250 - 500 # 2 - 300 250 - 500 # 2 - 4/0 # 14 - 250 (3) 2/0 - 500 (3) 2/0-400 (2) 2/0 - 500 (2) 250-500 (2) 1/0 - 300 (2) 3/0-250 2/0 - 500 (2) 3/0-250 2/0 - 500 # 6 - 350 (3) 2/0 - 500 (3) 2/0-400 (3) 2/0 - 500 (2) 250-500 (2) 1/0 - 300 (2) 3/0-250 (2) 1/0 - 300 (2) 3/0-250 2/0 - 500 # 6 - 350 (3) 2/0 - 500 (3) 2/0-400 (3) 2/0 - 500 (3) 2/0-400 (2) 2/0 - 500 (2) 3/0-250 (2) 1/0 - 300 (2) 3/0-250 2/0 - 500 (2) 3/0-250 (3) 2/0 - 500 (3) 2/0-400 (3) 2/0 - 500 (3) 2/0-400 (2) 2/0 - 500 (2) 250-500 (2) 1/0 - 300 (2) 3/0-250 2/0 - 500 (2) 3/0-250 (3) 2/0 - 500 (3) 2/0-400 (3) 2/0 - 500 (3) 2/0-400 (2) 2/0 - 500 (2) 250-500 (2) 1/0 - 300 (2) 3/0-250 2/0 - 500 (2) 3/0-250 (3) 2/0 - 500 (4) 4/0-500 (3) 2/0 - 500 (3) 2/0-400 (2) 2/0 - 500 (2) 250-500 (2) 1/0 - 300 (2) 3/0-250 (2) 1/0 - 300 (2) 3/0-250 (3) 2/0 - 500 (4) 4/0-500 (3) 2/0 - 500 (3) 2/0-400 (2) 2/0 - 500 (2) 250-500 (2) 2/0 - 500 (2) 3/0-250 (2) 1/0 - 300 (2) 3/0-250 (3) 2/0 - 500 (4) 4/0-500 (3) 2/0 - 500 (4) 4/0-500 (2) 2/0 - 500 (2) 250-500 (2) 2/0 - 500 (2) 250-500 (2) 1/0 - 300 (2) 3/0-250 (3) 2/0 - 500 (4) 4/0-500 (3) 2/0 - 500 (4) 4/0-500 (2) 2/0 - 500 (2) 250-500 (2) 2/0 - 500 (2) 250-500 (2) 1/0 - 300 (2) 3/0-250 See page 89 for Electrical Data footnotes. 82 YORK INTERNATIONAL FORM 201.18-EG1 SYSTEM #1 MODEL YCAS 0090EC 0100EC 0110EC 0120EC 0130EC 0140EC 0150EC 0160EC 0170EC 0180EC 0200EC 0210EC 0230EC VOLTS RLA 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 200 230 380 460 575 YORK INTERNATIONAL SYSTEM #2 FAN DATA11, 12 COMPRESSOR DATA 159.0 138.0 84.0 70.0 55.0 168.0 146.0 88.0 73.0 58.0 228.0 199.0 121.0 99.0 81.0 247.0 215.0 130.0 107.0 87.0 246.1 214.0 129.5 107.0 85.6 266.8 232.0 140.4 116.0 92.8 295.0 256.0 155.0 128.0 103.0 295.0 256.0 155.0 128.0 103.0 321.0 279.0 169.0 140.0 112.0 321.0 279.0 169.0 140.0 112.0 342.0 298.0 181.0 149.0 119.0 374.0 325.0 197.0 163.0 130.0 374.0 325.0 197.0 163.0 130.0 Y-LRA 404 354 219 174 138 404 354 219 174 138 591 481 285 228 182 591 481 285 228 182 591 481 285 228 182 591 481 285 228 182 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 708 342 343 280 224 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 COMPRESSOR DATA X-LRA QTY FLA (EA.) LRA (EA) RLA 1257 1103 681 542 431 1257 1103 681 542 431 1866 1518 900 719 574 1866 1518 900 719 574 1866 1518 900 719 574 1866 1518 900 719 574 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 12.0 10.0 5.2 5.0 3.9 12.0 10.0 5.2 5.0 3.9 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 52.0 62.0 21.0 27.0 26.0 52.0 62.0 21.0 27.0 26.0 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 159.0 138.0 84.0 70.0 55.0 168.0 146.0 88.0 73.0 58.0 164.0 143.0 86.0 71.0 56.0 164.0 143.0 86.0 71.0 56.0 246.1 214.0 129.5 107.0 85.6 266.8 232.0 140.4 116.0 92.8 264.5 230.0 139.2 115.0 92.0 295.0 256.0 155.0 128.0 103.0 295.0 256.0 155.0 128.0 103.0 321.0 279.0 169.0 140.0 112.0 342.0 298.0 181.0 149.0 119.0 342.0 298.0 181.0 149.0 119.0 374.0 325.0 197.0 163.0 130.0 Y-LRA X-LRA 404 354 219 174 138 404 354 219 174 138 404 354 219 174 138 404 354 219 174 138 591 481 285 228 182 591 481 285 228 182 591 481 285 228 182 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 708 642 343 280 224 1257 1103 681 542 431 1257 1103 681 542 431 1257 1103 681 542 431 1257 1103 681 542 431 1866 1518 900 719 574 1866 1518 900 719 574 1866 1518 900 719 574 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 2256 2045 1093 893 714 FAN DATA11, 12 FLA QTY (EA) 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 12.0 10.0 5.2 5.0 3.9 12.0 10.0 5.2 5.0 3.9 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 8.2 7.8 4.8 4.0 3.1 LRA (EA) 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 52.0 62.0 21.0 27.0 26.0 52.0 62.0 21.0 27.0 26.0 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 38.0 33.0 23.0 19.0 15.2 83 Electrical Data (Continued) OPTIONAL SINGLE-POINT POWER SUPPLY CONNECTION WITH INDIVIDUAL SYSTEM CIRCUIT BREAKERS – 3 & 4 COMPRESSOR UNITS (SEE FIG. 7) (One Field Provided Power Supply Circuit to the chiller. Field connections to Power Terminal Block (standard) or Non-Fused Disconnect (option) in ‘Option Panel’. Individual System Circuit Breakers in each Motor Control Center.) FIELD SUPPLIED WIRING CHILLER MODEL YCAS VOLTS 0250EC 0270EC 0300EC 0330EC 0360EC 0400EC 0440EC 380 460 575 380 460 575 380 460 575 380 460 575 380 460 575 380 460 575 380 460 575 FIELD PROVIDED POWER SUPPLY MCA1 561 464 372 651 534 427 678 559 445 745 612 487 835 689 550 896 739 589 991 812 647 MIN NF DISC SW2, 9 600 600 400 800 600 600 800 600 600 800 800 600 1000 800 600 1000 1000 800 1200 1000 800 OVER-CURRENT PROTECTION13 MIN.3, 5 MAX.4, 6 600 700 500 500 400 450 800 800 600 700 500 500 800 800 600 700 500 500 800 800 700 700 600 600 1000 1000 800 800 600 600 1000 1000 800 800 700 700 1200 1200 1000 1000 800 800 FACTORY PROVIDED (LUGS) WIRE RANGE7 TERMINAL BLOCK (LUGS) WIRE RANGE (2) 2/0-500 (2) 1/0-300 (2) # 2-4/0 (2) 2/0-500 (2) 2/0-500 (2) 1/0-300 (3) 1/0-300 (2) 2/0-500 (2) 1/0-500 (3) 1/0-300 (2) 2/0-500 (2) 1/0-300 (3) 2/0-500 (3) 1/0-300 (2) 2/0-500 (3) 2/0-500 (3) 2/0-500 (2) 2/0-500 (3) 2/0-500 (3) 2/0-500 (2) 2/0-500 NF DISC. SWITCH (LUGS) WIRE RANGE (2) 250-500 (2) 250-500 (3) 2/0-250 (3) 2/0-400 (2) 250-500 (2) 250-500 (3) 2/0-400 (2) 250-500 (2) 250-500 (3) 2/0-400 (3) 2/0-400 (2) 250-500 (4) 4/0-500 (3) 2/0-400 (2) 250-500 (4) 4/0-500 (4) 4/0-500 (3) 2/0-400 (4) 4/0-500 (4) 4/0-500 (3 )2/0-400 See page 89 for Electrical Data footnotes. 84 YORK INTERNATIONAL FORM 201.18-EG1 ELECTRICAL SYSTEM #1 FIELD SUPPLIED WIRING FAN DATA11, 12 COMPRESSOR #1 DATA COMPRESSOR #3 DATA RLA 155 128 103 155 128 103 181 149 119 197 163 130 199 164 131 181 149 119 197 163 130 Y-∆ ∆ LRA X-LRA 343 280 224 343 280 224 343 280 224 343 280 224 343 280 224 343 280 224 343 280 224 1,093 893 714 1,093 893 714 1,093 893 714 1,093 893 714 1,093 893 714 1,093 893 714 1,093 893 714 RLA 155 128 103 227 184 147 199 164 131 227 184 147 155 128 103 199 164 131 227 184 147 YORK INTERNATIONAL ELECTRICAL SYSTEM #2 FIELD SUPPLIED WIRING Y-∆ ∆ LRA X-LRA QTY FLA (EA) LRA (EA) 343 280 224 343 280 224 343 280 224 343 280 224 343 280 224 343 280 224 343 280 224 1,093 893 714 1,093 893 714 1,093 893 714 1,093 893 714 1,093 893 714 1,093 893 714 1,093 893 714 8 8 8 8 8 8 9 9 9 9 9 9 8 8 8 9 9 9 9 9 9 4.8 4.0 3.1 4.8 4.0 3.1 4.8 4.0 3.1 4.8 4.0 3.1 4.8 4.0 3.1 4.8 4.0 3.1 4.8 4.0 3.1 23.0 19.0 15.2 23.0 19.0 15.2 23.0 19.0 15.2 23.0 19.0 15.2 23.0 19.0 15.2 23.0 19.0 15.2 23.0 19.0 15.2 COMPRESSOR #2 DATA RLA 155 128 103 155 128 103 181 149 119 197 163 130 199 164 131 181 149 119 197 163 130 Y-∆ ∆ LRA X-LRA 343 280 224 343 280 224 343 280 224 343 280 224 343 280 224 343 280 224 343 280 224 1,093 893 714 1,093 893 714 1,093 893 714 1,093 893 714 1,093 893 714 1,093 893 714 1,093 893 714 FAN DATA11, 12 COMPRESSOR #4 DATA RLA — — — — — — — — — — — — 155 128 103 199 164 131 227 184 147 Y-∆ ∆ LRA X-LRA — — — — — — — — — — — — 343 280 224 343 280 224 343 280 224 — — — — — — — — — — — — 1,093 893 714 1,093 893 714 1,093 893 714 QTY 4 4 4 4 4 4 5 5 5 5 5 5 8 8 8 9 9 9 9 9 9 FLA (EA) LRA (EA) 4.8 4.0 3.1 4.8 4.0 3.1 4.8 4.0 3.1 4.8 4.0 3.1 4.8 4.0 3.1 4.8 4.0 3.1 4.8 4.0 3.1 23.0 19.0 15.2 23.0 19.0 15.2 23.0 19.0 15.2 23.0 19.0 15.2 23.0 19.0 15.2 23.0 19.0 15.2 23.0 19.0 15.2 85 Electrical Data (Continued) OPTIONAL SINGLE-POINT POWER SUPPLY CONNECTION – 2 COMPRESSOR UNITS (SEE FIG. 3) (One Field Provided Power Supply Circuit to the chiller. Field connections to Power Terminal Block or Non-Fused Disconnect in ‘Option Panel’. No Internal Branch Circuit Protection (Breakers) per Motor Control Center10) CHILLER MODEL YCAS 0090EC 0100EC 0110EC 0120EC 0130EC 0140EC 0150EC 0160EC 0170EC 0180EC 0200EC 0210EC 0230EC VOLTS MCA1 380 460 575 380 460 575 380 460 575 380 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 218 182 143 227 189 150 269 225 181 280 235 189 273 217 293 234 307 246 320 257 335 268 347 277 375 299 393 313 407 324 FIELD PROVIDED POWER SUPPLY MIN NF OVER-CURRENT PROTECTION13 DISC SW2, 9 MIN.3, 5 MAX.4, 6 250 250 300 200 200 250 150 175 175 250 250 300 200 225 250 200 175 200 400 300 350 250 250 300 200 225 250 400 350 400 250 300 300 200 225 250 400 300 350 250 250 300 400 350 400 250 300 300 400 350 400 400 300 300 400 400 400 400 300 350 400 400 450 400 300 350 400 400 450 400 350 350 400 450 500 400 350 400 600 450 500 400 350 400 600 450 500 400 400 450 FIELD-SUPPLIED WIRING FACTORY PROVIDED (LUGS) WIRE RANGE 7 STANDARD OPTIONAL NF TERMINAL BLOCK DISC. SWITCH # 2 - 300 #N/A # 2 - 4/0 # 14 - 250 # 2 - 4/0 # 14 - 250 # 2 - 300 250 - 500 # 2 - 4/0 # 14 - 250 # 2 - 4/0 # 14 - 250 1/0 - 500 250 - 500 # 2 - 300 # 14 - 250 # 2 - 4/0 # 14 - 250 1/0 - 500 250 - 500 # 2 - 300 250 - 500 # 2 - 4/0 # 14 - 250 # 1 - 500 (2) 3/0-250 # 1 - 500 # 6 - 350 (2) # 2 - 300 (2) 3/0-250 # 1 - 500 # 6 - 350 (2) # 2 - 300 (2) 3/0-250 # 1 - 500 (2) 3/0-250 (2) # 2 - 300 (2) 3/0-250 # 1 - 500 (2) 3/0-250 (2) # 2 - 300 (2) 3/0-250 # 1 - 500 (2) 3/0-250 (2) # 2 - 300 (2) 3/0-250 (2) # 2 - 300 (2) 3/0-250 (2) # 1 - 500 (2) 3/0-250 (2) # 2 - 300 (2) 3/0-250 (2) # 1 - 500 (2) 250-500 (2) # 2 - 300 (2) 3/0-250 (2) # 1 - 500 (2) 250-500 (2) # 2 - 300 (2) 3/0-250 See page 89 for Electrical Data footnotes. 86 YORK INTERNATIONAL FORM 201.18-EG1 SYSTEM #1 MODEL YCAS 0090EC 0100EC 0110EC 0120EC 0130EC 0140EC 0150EC 0160EC 0170EC 0180EC 0200EC 0210EC 0230EC VOLTS 380 460 575 380 460 575 380 460 575 380 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 YORK INTERNATIONAL SYSTEM #2 FAN DATA11, 12 COMPRESSOR DATA COMPRESSOR DATA RLA X-LRA QTY FLA (EA.) LRA (EA) RLA X-LRA 84 70 55 88 73 58 121 99 81 130 107 87 107 86 116 93 128 103 128 103 140 112 140 112 149 119 163 130 163 130 681 542 431 681 542 431 900 719 574 900 719 574 719 574 719 574 893 714 893 714 893 714 893 714 893 714 893 714 893 714 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 4.8 4.0 3.1 4.8 4.0 3.1 5.2 5.0 3.9 5.2 5.0 3.9 4.0 3.1 4.0 3.1 4.0 3.1 4.0 3.1 4.0 3.1 4.0 3.1 4.0 3.1 4.0 3.1 4.0 3.1 23.0 19.0 15.2 23.0 19.0 15.2 21.0 27.0 26.0 21.0 27.0 26.0 19.0 15.2 19.0 15.2 19.0 15.2 19.0 15.2 19.0 15.2 19.0 15.2 19.0 15.2 19.0 15.2 19.0 15.2 84 70 55 88 73 58 86 71 56 86 71 56 107 86 116 93 115 92 128 103 128 103 140 112 149 119 149 119 163 130 681 542 431 681 542 431 681 542 431 681 542 431 719 574 719 574 719 574 893 714 893 714 893 714 893 714 893 714 893 714 FAN DATA11,12 FLA QTY (EA) 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 4.8 4.0 3.1 4.8 4.0 3.1 5.2 5.0 3.9 5.2 5.0 3.9 4.0 3.1 4.0 3.1 4.0 3.1 4.0 3.1 4.0 3.1 4.0 3.1 4.0 3.1 4.0 3.1 4.0 3.1 LRA (EA) 23.0 19.0 15.2 23.0 19.0 15.2 21.0 27.0 26.0 21.0 27.0 26.0 19.0 15.2 19.0 15.2 19.0 15.2 19.0 15.2 19.0 15.2 19.0 15.2 19.0 15.2 19.0 15.2 19.0 15.2 87 Electrical Data (Continued) OPTIONAL SINGLE-POINT POWER SUPPLY CONNECTION TO FACTORY CIRCUIT BREAKER – 2 COMPRESSOR UNITS (SEE FIG.4) (One Field Provided Power Supply Circuit to the chiller. Field Connection to Circuit Breaker in ‘Option Panel’. No internal Individual System Circuit Protection per Motor Control Center10.) MODEL YCAS VOLTS 380 460 575 380 460 575 380 460 575 380 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 460 575 0090EC 0100EC 0110EC 0120EC 0130EC 0140EC 0150EC 0160EC 0170EC 0180EC 0200EC 0210EC 0230EC NOTE: MCA1 218 182 143 227 189 150 269 225 181 280 235 189 273 217 293 234 307 246 320 257 335 268 347 277 375 299 393 313 407 324 FIELD SUPPLIED WIRING FACTORY SUPPLIED BREAKER WIRE RANGE7 (LUGS) RATING2 300 #N/A 250 # 14 - 250 200 # 14 - 250 300 250 - 500 250 # 14 - 250 200 # 14 - 250 350 250 - 500 300 # 14 - 250 250 # 14 - 250 400 250 - 500 300 250 - 500 250 # 14 - 250 400 (2) 3/0-250 250 # 6 - 350 400 (2) 3/0-250 400 (2) 3/0-250 400 (2) 3/0-250 400 (2) 3/0-250 400 (2) 3/0-250 400 (2) 3/0-250 400 (2) 3/0-250 400 (2) 3/0-250 400 (2) 3/0-250 400 (2) 3/0-250 600 (3) 2/0-400 400 (2) 3/0-250 600 (3) 2/0-400 400 (2) 3/0-250 600 (3) 2/0-400 400 (2) 3/0-250 SYSTEM #1 COMPRESSOR FANS11, 12 RLA X-LRA QTY FLA(ea) LRA(ea) 84 681 3 4.8 23.0 70 542 3 4.0 19.0 55 431 3 3.1 15.2 88 681 3 4.8 23.0 73 542 3 4.0 19.0 58 431 3 3.1 15.2 121 900 3 5.2 21.0 99 719 3 5.0 27.0 81 574 3 3.9 26.0 130 900 3 5.2 21.0 107 719 3 5.0 27.0 87 574 3 3.9 26.0 107 719 4 4.0 19.0 86 574 4 3.1 15.2 116 719 4 4.0 19.0 93 574 4 3.1 15.2 128 893 4 4.0 19.0 103 714 4 3.1 15.2 128 893 4 4.0 19.0 103 714 4 3.1 15.2 140 893 4 4.0 19.0 112 714 4 3.1 15.2 140 893 4 4.0 19.0 112 714 4 3.1 15.2 149 893 5 4.0 19.0 119 714 5 3.1 15.2 163 893 5 4.0 19.0 130 714 5 3.1 15.2 163 893 5 4.0 19.0 130 714 5 3.1 15.2 SYSTEM #2 COMPRESSOR FANS11, 12 RLA X-LRA QTY FLA(ea) LRA(ea) 84 681 3 4.8 23.0 70 542 3 4.0 19.0 55 431 3 3.1 15.2 88 681 3 4.8 23.0 73 542 3 4.0 19.0 58 431 3 3.1 15.2 86 681 3 5.2 21.0 71 542 3 5.0 27.0 56 431 3 3.9 26.0 86 681 3 5.2 21.0 71 542 3 5.0 27.0 56 431 3 3.9 26.0 107 719 4 4.0 19.0 86 574 4 3.1 15.2 116 719 4 4.0 19.0 93 574 4 3.1 15.2 115 719 4 4.0 19.0 92 574 4 3.1 15.2 128 893 4 4.0 19.0 103 714 4 3.1 15.2 128 893 4 4.0 19.0 103 714 4 3.1 15.2 140 893 4 4.0 19.0 112 714 4 3.1 15.2 149 893 5 4.0 19.0 119 714 5 3.1 15.2 149 893 5 4.0 19.0 119 714 5 3.1 15.2 163 893 5 4.0 19.0 130 714 5 3.1 15.2 Wye-Delta Compressor Start not available with this option. See page 89 for Electrical Data footnotes. Electrical Notes LEGEND ACR-LINE C.B. D.E. DISC SW FACT CB FLA HZ MAX MCA MIN MIN NF RLA S.P. WIRE Y-∆ X-LRA Y-LRA 88 ACROSS THE LINE START CIRCUIT BREAKER DUAL ELEMENT FUSE DISCONNECT SWITCH FACTORY-MOUNTED CIRCUIT BREAKER FULL LOAD AMPS HERTZ MAXIMUM MINIMUM CIRCUIT AMPACITY MINIMUM MINIMUM NON-FUSED RUNNING LOAD AMPS SINGLE-POINT WIRING WYE-DELTA START ACROSS-THE-LINE INRUSH LOCKED ROTOR AMPS WYE-DELTA INRUSH LOCKED ROTOR AMPS VOLTAGE CODE -17 = 200-3-60 -28 = 230-3-60 -40 = 380-3-60 -46 = 460-3-60 -58 = 575-3-60 YORK INTERNATIONAL FORM 201.18-EG1 Electrical Notes (Continued) CONTROL POWER SUPPLY (UNITS WITHOUT STANDARD CONTROL CIRCUIT TRANSFORMER) NO. OF COMPRESSORS CONTROL POWER SUPPLY MCA (MAX LOAD CURRENT) MAX DUAL ELEMENT FUSE SIZE NON-FUSED DISCONNECT SWITCH SIZE 2 115V-1Ø 20A 20A 30A 3 or 4 (Non-CE 50/60Hz) 115V-1Ø 30A 30A 30A 3 or 4 (CE 50Hz) 115V-1Ø 25A 30A 30A CONTROL POWER SUPPLY (UNITS WITH STANDARD CONTROL CIRCUIT TRANSFORMER) NO. OF COMPRESSORS 2 3 or 4 CONTROL POWER SUPPLY MCA (MAX LOAD CURRENT) RECOMMENDED DUAL ELEMENT FUSE SIZE NON-FUSED DISCONNECT SWITCH SIZE 200V - 60 HZ 230V - 60 HZ 380V - 60 HZ 460V - 60 HZ 575V - 60HZ 380V - 60 HZ 460V - 60 HZ 575V - 60 HZ 12.5A 10.9A 6.6A 5.4A 4.3A 9.9A 8.2A 6.5A 30A 30A 15A 15A 15A 30A 15A 15A — — — — — — — — NOTES (for pages 78 - 89) 1. Minimum circuit ampacity (MCA) is based on 125% of the rated load amps for the largest motor plus 100% of the rated load amps for all other loads included in the circuit, per N.E.C. Article 430-24. If a Factory Mounted Control Transformer is provided, add the following to the system #1 MCA values in the YCAS Tables: -17, add 15 amps; -28, add 12 amps; -40, add 7 amps; -46, add 6 amps; -58, add 5 amps. 2. The recommended disconnect switch is based on a minimum of 115% of the summation rated load amps of all the loads included in the circuit, per N.E.C. 440 - 12A1. 3. Minimum recommended fuse size is based on 150% of the largest motor RLA plus 100% of the remaining RLAs. Minimum fuse rating = (1.5 x largest compressor RLA) + other compressor RLAs + (# fans x each fan motor FLA). 4. Maximum dual element fuse size is based on 225% maximum plus 100% of the rated load amps for all other loads included in the circuit, per N.E.C. 440-22. Maximum fuse rating = (2.25 x largest compressor RLA) + other compressor RLAs + (# fans x each fan motor FLA). 5. Minimum recommended circuit breaker is 150% maximum plus 100% of rated load amps included in the circuit. Minimum circuit breaker rating = (1.5 x largest compressor RLA) + other compressor RLAs + (# fans x each fan motor FLA). 6. Maximum circuit breaker is based on 225% maximum plus 100% of the rated load amps for all loads included in the circuit, per circuit, per U.L. 1995 Fig. 36.2. Maximum circuit breaker rating = (2.25 x largest compressor RLA) + other compressor RLAs + ( # fans x each fan motor FLA). 7. The Incoming Wire Range is the minimum and maximum wire size that can be accommodated by unit wiring lugs. The (1), (2), or (3) indicate the number of termination points or lugs which are available per phase. Actual wire size and number of wires per phase must be determined based on ampacity and job requirements using N.E.C. wire sizing information. The above recommendations are based on the National Electric Code and using copper conductors only. Field wiring must also comply with local codes. 8. A ground lug is provided for each compressor system to accommodate field grounding conductor per N.E.C. Article 250-54. A control circuit grounding lug is also supplied. Incoming ground wire range is #6 - 350 MCM. 9. The field supplied disconnect is a “Disconnecting Means” as defined in N.E.C. 100.B, and is intended for isolating the unit from the available power supply to perform maintenance and troubleshooting. This disconnect is not intended to be a Load Break Device. 10. Two-Compressor machines with single-point power connection, and equipped with Star (Wye)-Delta Compressor motor start must also include factory-provided individual system circuit breakers in each motor control center. All 3 & 4 Compressor machines equipped with Star-Delta compressor motor start must also include factory-provided individual system circuit breakers in each motor control center. 11. Consult factory for Electrical Data on units equipped with “High Static Fan” option. High Static Fans are 3.8 kW each. 12. FLA for “Low Noise Fan” motors: 200V = 8.0A, 230V = 7.8A, 380V = 4.4A, 460V = 3.6A, 575V = 2.9A. 13. Group Rated breaker must be HACR type for cUL Machines. YORK INTERNATIONAL 89 Power Connection Options STYLE “F” 2 COMPRESSOR POWER WIRING CONNECTIONS Optional Field Provided 115-1-60 Micropanel Supply ∆ Start and Suitable for Y-∆ Across-The-Line Start See Note 3 See page 93 for notes. LD05548 FIG. 1 – MULTIPLE POINT POWER SUPPLY CONNECTION Optional Field Provided 115-1-60 Micropanel Supply ∆ Start and Suitable for Y-∆ Across-The-Line Start See Note 3 See page 93 for notes. LD05549 FIG. 2 – OPTIONAL SINGLE-POINT POWER SUPPLY WITH INDIVIDUAL SYSTEM CIRCUIT BREAKERS 90 YORK INTERNATIONAL FORM 201.18-EG1 STYLE “F” 2 COMPRESSOR POWER WIRING CONNECTIONS Optional Field Provided 115-1-60 Micropanel Supply Suitable for: Across-The-Line Start See Note 3 See page 93 for notes. LD05550 FIG. 3 – OPTIONAL SINGLE-POINT POWER SUPPLY CONNECTION WITH FIELD SUPPLIED CIRCUIT PROTECTION Optional Field Provided 115-1-60 Micropanel Supply Suitable for: Across-The-Line Start See Note 3 See page 93 for notes. LD05551 FIG. 4 – OPTIONAL SINGLE-POINT POWER SUPPLY WIRING TO FACTORY CIRCUIT BREAKER YORK INTERNATIONAL 91 Power Connection Options (Continued) 3 & 4 COMPRESSOR POWER CONNECTION OPTIONS Suitable for: Across the Line Start TB1 TB2 Control Power Wiring As Shown On The Two Compressor Diagrams TB TB3 TB4 Field Supply #2 or DS See Note 3 TB Field Supply #1 or DS LD05552 See page 93 for notes. FIG. 5 – MULTIPLE POINT POWER SUPPLY CONNECTION Suitable for: Y - ∆ Start and Across the Line Start CB1 CB2 Control Panel Wiring as shown on The Two-Compressor Diagrams TB CB3 CB4 Field Supply #2 or DS See Note 3 TB Field Supply #1 or DS See page 93 for notes. LD05553 FIG. 6 – MULTIPLE POINT POWER SUPPLY CONNECTION WITH INDIVIDUAL SYSTEM CIRCUIT BREAKERS 92 YORK INTERNATIONAL FORM 201.18-EG1 CB1 Suitable for: Y - ∆ Start and Across the Line Start CB2 Control Panel Wiring As Shown on The Two Compressor Diagram CB3 CB4 TB or Field Supply DS See Note 3 See notes below. LD05554 FIG. 7 – OPTIONAL SINGLE-POINT POWER SUPPLY CONNECTION WITH INDIVIDUAL SYSTEM CIRCUIT BREAKERS NOTES: 1. U.L. Label is provided on 60 Hz units for these electrical wiring configurations. 2. –– –– –– –– –– –– Dashed Line = Field Provided Wiring. 3. The above recommendations are based on the National Electric Code and using copper conductors only. Field wiring must also comply with local codes. Group Rated breaker must be HACR type for cUL machines. LEGEND REFERS TO TYPICAL CONTROL WIRING DIAGRAM ON PAGES 96 & 97. LEGEND TS Transient Voltage Suppression Terminal Block for Customer Connections Terminal Block for Customer Low Voltage (Class 2) Connections. See Note 2 Terminal Block for YORK Connections Only Wiring and Components by YORK Optional Equipment Wiring and/or Components by Others YORK INTERNATIONAL 93 Typical Control Wiring – 2-Compressor Units 94 YORK INTERNATIONAL REFER TO BOTTOM OF PAGE 93 FOR LEGEND. YORK INTERNATIONAL LD04756 6. See Installation, Operation and Maintenance manual when optional equipment is used. 5. Alarm contacts are for annunciating alarm/unit malfunction. Contacts are rated at 115V, 100va, resistive load only, and must be suppressed at load by user. 4. To stop unit (emergency stop) with contacts other than those shown, install the stop contact between terminals 5 and 1. If a stop device is not installed, a jumper must be connected between terminals 5 and 1. Device must have a minimum contact rating of 100va at 115 volts a.c. 3. To cycle unit on and off automatically with contact shown, install a cycling device in series with the flow switch (flsw). See note 2 for contact rating and wiring specifications. 2. Contacts must be suitable for switching 24VDC, (gold contacts recommended). Wiring shall not be run in the same conduit with any line voltage wiring. 1. Field wiring to be in accordance with the current edition of the National Electrical Code as well as all other applicable codes and specifications. NOTES: FORM 201.18-EG1 95 Application Data UNIT LOCATION The YCAS chillers are designed for outdoor installation. When selecting a site for installation, be guided by the following requirements: 1. Installation sites may be either on a roof or on ground level. (See FOUNDATION) 2. Select a place having an adequate supply of fresh air for the condensers. Recommended clearances for all units are shown on the DIMENSIONS pages. 3. Avoid locations near windows or structures where normal operating sounds may be objectionable. 4. The standard condenser fans are propeller-type and are not recommended for use with ductwork, filters or other nuisance in the condenser air stream. 5. When it is desirable to surround the unit(s), it is recommended that the screening be able to pass the required chiller CFM without exceeding 0.1" external static pressure. 6. Protection against corrosive environments is available by supplying the units with either copper fins, or cured phenolic or epoxy-coating on the condenser coils. Either the cured phenolic or epoxy-coated coils should be utilized with any units being installed at the seashore, or where salt spray may hit the units, or where acid rain is prevalent (copper condenser coils are not recommended where they may be exposed to acid rain). 7. On installations where winter operation is intended and snow accumulations are expected, additional elevation must be provided to insure normal condenser air flow. FOUNDATION The unit should be mounted on a flat and level foundation, ground or roof, capable of supporting the entire operating weight of the equipment. Operating weights are given in the PHYSICAL DATA tables. Roof Locations – Adequate structural strength to safely support the entire weight of the unit and service personnel must be provided. Care must be taken not to damage the roof during installation. If the roof is “bonded”, consult building contractor or architect for special installation requirements. Roof installations should incorporate the use of spring-type isolators to 96 minimize the transmission of vibration into building structure. Additional support should be provided to the roof at the spring-isolator locations. Ground Locations – Units must be installed on a substantial base that will not settle and cause strain on the refrigerant lines, resulting in possible leaks. A onepiece concrete slab, with footers extending below the frost line, is recommended. The slab should not be tied to the main building foundation as noises will telegraph. Mounting holes (5/8") are provided in the base rails for bolting the unit to its foundation. See DIMENSIONS for location of the mounting holes. For ground installations, precautions should be taken to protect the unit from tampering by, or injury to, unauthorized persons. Fasteners on access panels will prevent casual tampering; however, further safety precautions, such as unit enclosure options, a fencedin enclosure, or locking devices on the panels may be advisable. Check local authorities for safety regulations. CHILLED LIQUID PIPING The chilled liquid piping system should be laid out so that the circulating pump discharges into the cooler. The inlet and outlet cooler-liquid connections are given in DIMENSIONS. Hand stop valves are recommended for use in all lines to facilitate servicing. Drain connections should be provided at all low points to permit complete drainage of the cooler and system piping. A strainer (40 mesh) is recommended for use on the INLET line to the cooler, and must be in place at initial operation of the water pumps. Pressure-gauge connections are recommended for installation in the inlet and outlet water lines. Gauges are not provided with the unit and are to be furnished by others. Chilled liquid lines exposed to the weather should be wrapped with a supplemental heater cable and insulated, or glycol should be added to the chilled liquid to protect against freezing if low-ambient periods are expected. A flow switch is available as an accessory on all units. A flow switch must be installed in the leaving water piping of the cooler and must not be used to start and stop the unit. YORK INTERNATIONAL FORM 201.18-EG1 Guide Specifications PART 1 — GENERAL PART 2 — PRODUCTS 1.01 2.01 CHILLER MATERIALS AND COMPONENTS A. General: Install and commission, as shown on the schedules and plans, factory assembled, charged, and tested air cooled screw compressor chiller(s) as specified herein. Chiller shall be designed, selected, and constructed using a refrigerant with Flammability rating of “1”, as defined by ANSI/ASHRAE STANDARD-34 Number Designation and Safety Classification of Refrigerants. Chiller shall include, but is not limited to: a complete system with not less than two independent refrigerant circuits, semihermetic twin screw compressors, direct expansion type evaporator, air-cooled condenser, refrigerant, lubrication system, interconnecting wiring, safety and operating controls including capacity controller, control center, motor starting components, and special features as specified herein or required for safe, automatic operation. B. Cabinet: External structural members shall be constructed of heavy gauge, galvanized steel coated with baked on powder paint which, when subject to ASTM B117, 500 hour, 5% salt spray test, yields minimum ASTM 1654 rating of “6”. SCOPE A. The requirements of the General Conditions, Supplementary Conditions, Division 1, and Drawings apply to all Work herein. B. Provide Microprocessor controlled, twin-screw compressor, air-cooled, liquid chillers of the scheduled capacities as shown and indicated on the Drawings, including but not limited to: 1. Chiller package 2. Charge of refrigerant and oil 3. Electrical power and control connections 4. Chilled water connections 1.02 QUALITY ASSURANCE A. Products shall be Designed, Tested, Rated and Certified in accordance with, and installed in compliance with applicable sections of the following Standards and Codes: 1. ANSI/ASHRAE Standard 15 – Safety Code for Mechanical Refrigeration 2. ANSI/NFPA Standard 70 – National Electrical Code (N.E.C). 3. ASME Boiler and Pressure Vessel Code, Section VIII, Division 1. 4. ARI Standard 550/590 – Centrifugal and Rotary Screw Water Chilling Packages. 5. Conform to Underwriters Laboratories (U.L.) for construction of chillers and provide U.L./cU.L. Listing label. 6. Manufactured in facility registered to ISO 9002. B. Factory Test: Chiller shall be pressure-tested, evacuated and fully charged with refrigerant and oil, and shall be factory operational run tested with water flowing through the vessel. C. Warranty: Manufacturer shall Warrant all equipment and material of its manufacture against defects in workmanship and material for a period of one year from date of initial start-up or eighteen (18) months from date of shipment, whichever occurs first. 1.03 DELIVERY AND HANDLING A. Unit shall be delivered to job site fully assembled, and charged with refrigerant and oil by the Manufacturer. B. Unit shall be stored and handled per Manufacturer’s instructions. YORK INTERNATIONAL 2.02 COMPRESSORS AND MOTORS A. Compressors: Shall be direct drive, semihermetic, rotary twin-screw type, including: internal muffler, temperature actuated ‘off-cycle’ heater, rain-tight terminal box, internal discharge check, discharge and suction shut-off service valves, and precision machined cast iron housing. Design working pressure of entire compressor, suction to discharge, shall be 450 PSIG (31 bar). Compressor shall be U.L. listed. B. Motors: Refrigerant suction gas cooled two-pole accessible hermetic compressor motor, full suction gas flow through 0.006" maximum mesh screen, with inherent internal thermal overload protection and external current overload on all three phases. Motor stator shall employ APT2000 type magnet wire. C. Lubrication: External oil separators with no moving or fragile parts, 450 PSIG design working pressure, and UL listing. Refrigerant system differential pressure shall provide oil flow through service replaceable, 0.5 micron, full flow, cartridge type oil filter internal to compressor. Filter bypass, less restrictive media, or oil pump not acceptable. D. Capacity Control: Compressors shall start at minimum load position. Capacity control range from 100% to 10% of chiller full load using continuous function slide valves, and without hot gas bypass. Step unloading unacceptable. Provide Microprocessor controlled, output pressure regulating capacity control 97 Guide Specifications (Continued) valve to command compressor capacity independent of control valve input pressure and balance compressor capacity with cooling load. 2.03 REFRIGERANT CIRCUIT COMPONENTS Each independent refrigerant circuit shall include: liquid line shutoff valve with charging port, low side pressure relief device, removable core filter-drier, solenoid valve, sight glass with moisture indicator, thermostatic expansion valves, and flexible, closed-cell foam insulated suction line. 2.04 HEAT EXCHANGERS A. Evaporator: 1. Direct expansion type with refrigerant inside high efficiency copper tubes, chilled liquid forced over the tubes by galvanized steel baffles. Independent refrigerant circuits per compressor. 2. Constructed, tested, and stamped in accordance with applicable sections of ASME pressure vessel code for minimum 350 PSIG (24 bar) refrigerant side design working pressure and 150 PSIG (10 bar) water side design working pressure. 3. Shell covered with ¾" (19mm), flexible, closedcell insulation, thermal conductivity of 0.26k ([BTU/HR-Ft2-°F]/in.) maximum. Water nozzles with grooves for mechanical couplings, and insulated by Contractor after pipe installation. 4. Provide vent and drain fittings, and thermostatically controlled heaters to protect to -20°F (-29°C) ambient in off-cycle. B. Air Cooled Condenser: 1. Coils: Internally enhanced, seamless copper tubes, mechanically expanded into aluminum alloy fins with full height collars. Subcooling coil an integral part of condenser. Design working pressure shall be 450 PSIG (31 bar). 2. Fans: Shall be dynamically and statically balanced, direct drive, corrosion resistant glass fiber reinforced composite blades molded into low noise, full airfoil cross section, providing vertical air discharge from extended orifices for efficiency and low sound. Each fan in its own compartment to prevent cross flow during fan cycling. Guards of heavy gauge, PVC (polyvinyl chloride) coated or galvanized steel. 3. Fan Motors: High efficiency, direct drive, 6-pole, 3-phase, insulation class “F”, current protected, Totally Enclosed Air-Over (TEAO), rigid mounted, with double sealed, permanently lubricated, ball bearings. 98 C. Refrigerant Economizer (when provided): Stainless steel plate type, oven brazed with copper, U.L./cU.L. Listed, 450 PSIG (31 bar) design working pressure. 2.05 CONTROLS A. General: Automatic start, stop, operating, and protection sequences across the range of scheduled conditions and transients. B. Control Circuit Transformer: Factory mounted with primary breaker having lockable, external handle, and 115V/1Ø secondary. C. Microprocessor Enclosure: Rain and dust tight NEMA 3R/12 (IP55) powder painted steel cabinet with hinged, latched, and gasket sealed door. D. Microprocessor Control Center: 1. Automatic control of compressor start/stop and load/unload, anti-coincidence and anti-recycle timers, automatic pump-down at start-up and shutdown, condenser fans, evaporator pump, evaporator heater, unit alarm contacts, run signal contacts, and chiller operation from 0°F to 125°F (-18°C to 52°) ambient. Automatic reset to normal chiller operation after power failure. 2. Setpoint Reset: a. Pulse Width Modulated (PWM) input to reset current unload setpoint downward via signal from external Energy Management System (EMS), maximum allowable reset programmable from microprocessor keypad. b. PWM input to reset the chilled liquid setpoint upward via signal from remote EMS, maximum allowable reset programmable from microprocessor keypad. 3. Software stored in non-volatile memory, with programmed setpoints retained in lithium battery backed real time clock (RTC) memory for minimum 5 years. 4. Forty character liquid crystal display, descriptions in English (or Spanish, French, Italian, or German), numeric data in English (or Metric) units. Sealed keypad with sections for Setpoints, Display, Entry, Print, Program, Clock, and Unit On/ Off Switch. 5. Programmable Setpoints (within Manufacturer limits): display language; discharge pressure unload and cutout; low suction pressure cutout; low and high ambient cutouts; leaving chilled liquid temperature: setpoint, control range, and cutout; high motor current unload; anti-recycle time; lag compressor start; local or remote control; units of measure; compressor lead/lag; power failure restart (auto or manual), and maximum EMSPWM reset temperature range. YORK INTERNATIONAL FORM 201.18-EG1 6. Display Data: Chiller liquid return and leaving temperatures, ambient, lead compressor identification and lead/lag delay, clock and schedule, (variable) out of range, remote input indication, chilled liquid reset setpoint, leaving liquid pull-down rate setpoint, leaving liquid error (deviation from setpoint), and history data for last six shutdown faults. Compressor suction, discharge, and oil pressures and temperatures, suction and discharge superheats, percent of full-load motor current, operating hours, starts, and anti-recycle timer status. Status Messages for manual override, unit switch off, compressor run, run permissive, remote controlled shut down, no cooling load, daily/holiday shut down, anti-recycle/anti-coincident timer, high pressure low suction temperature limit. 7. System Safeties: Shall cause individual compressor systems to perform auto-reset shut down; manual reset required after the third trip in 90 minutes. Includes: high discharge pressure or temperature, low suction pressure, high / low motor current, high pressure switch, high / low differential oil pressure, high oil temperature, and motor protector. Compressor motor protector shall protect against damage due to: low or high input current, phase reversal (reverse rotation), current unbalance, phase loss, thermal overload of windings, and low voltage. 8. Unit Safeties: Shall be automatic reset and cause compressors to shut down if: high or low ambient, low leaving chilled liquid temperature, under voltage, and flow switch operation. Contractor shall provide flow switch and wiring per chiller manufacturer requirements. 9. Alarm Contacts: High or low ambient, low leaving chilled liquid temperature, low voltage, low battery, and (per compressor circuit): high discharge pressure or temperature, low suction pressure, low or high motor current, low or high differential oil pressure, and high oil temperature. E. Manufacturer shall provide any controls not listed above, necessary for automatic chiller operation. Mechanical Contractor shall provide field control wiring necessary to interface sensors to the chiller control system. 2.06 POWER CONNECTION and DISTRIBUTION A. Power Panels: 1. NEMA 3R/12 (IP55) rain/dust tight, powder painted steel cabinets with hinged, latched, and gasket sealed outer doors equipped with wind struts for safer servicing. Provide main power connection(s), compressor and fan motor start contactors, current overloads, and factory wiring. YORK INTERNATIONAL 2. Field power supply wiring connections shall be to a single power center on the chiller, shall be 3 phase of scheduled voltage, and shall connect to terminal blocks per each of the two motor control panels. Separate disconnecting means and/or external branch circuit protection (by Contractor) required per applicable local or national codes. 3. Provide two electrically separate, adjacent motor control center cabinets, with independent doors and separated by a steel panel, for compressor and fan motor power distribution components. B. Exposed compressor and fan motor power wiring shall be routed through liquid tight conduit. 2.07 ACCESSORIES and OPTIONS Some accessories and options supercede standard product features. Your YORK representative will be pleased to provide assistance. A. Microprocessor controlled, Factory installed WyeDelta compressor motor starters for reduced compressor inrush start current. Two-compressor machines with Single-Point Power connection and equipped with Star-Delta compressor motor start must also include factory provided circuit breakers in each motor control center. All 3 & 4 compressor machines equipped with Star-Delta compressor motor start must also include factory provided circuit breakers in each motor control center. B. Power Supply Connections: 1. Two Compressor Machines – a. Multiple Point with Individual System Circuit Breakers or Non-Fused Disconnect Switches: Two Field provided branch circuits shall connect to Individual System Circuit Breakers or Non-Fused Disconnects per compressor on each of the two motor control centers, with lockable external handles on doors in compliance with Article 440-14 of the N.E.C. b. Single-Point Terminal Block or Non-fused Disconnect Switch: Field provided branch circuit shall connect to single-point Terminal Block or Non-Fused Disconnect with lockable external handle in compliance with N.E.C. Article 440-14, with Factory provided interconnecting wiring to (optional Individual System Circuit Breakers, and) compressor motor start components in each of two motor control center cabinets. c. Single-Point Circuit Breaker: Field provided branch circuit shall connect to Single-Point Circuit Breaker with Lockable External Handle (in compliance with Article 440-14 of N.E.C.) 99 Guide Specifications (Continued) factory provided interconnecting wiring to compressor motor start components in each of two motor control center cabinets. 2. Three and Four Compressor Machines – a. Multiple Point power connection to Terminal Blocks or Non-Fused Disconnect Switches: Two Field provided branch circuits shall connect to factory provided Terminal Blocks or Non-Fused Disconnect Switches, with Lockable External Handle in compliance with Article 440-14 of N.E.C., with factory furnished interconnecting wiring to (optional Individual System Circuit Breakers with lockable external handles, and) compressor motor start components in each of the two motor control center cabinets. b. Single-Point Terminal Block or Non-fused Disconnect Switch: Field provided branch circuit shall connect to Single-Point Terminal Block or Non-Fused Disconnect with lockable external handle in compliance with N.E.C. Article 440-14, with factory provided interconnecting wiring to Individual System Circuit Breakers and compressor motor start components in each of two motor control center cabinets. C. Control Power Terminal Strip: Provided in Microprocessor panel for field supplied 115V-1Ø control circuit power. D. Condenser Coil Environmental Protection: 1. Black Fin: Epoxy coated aluminum fin stock to guard from corrosive agents and insulate against galvanic potential. For mild seashore or industrial locations. 2. Copper Fin: Provide copper fins in lieu of aluminum. 3. Phenolic Coating: Cured phenolic coating on condenser coils for seashore and other corrosive applications (with the exception of strong alkalis, oxidizers, and wet bromine, chlorine and fluorine in concentrations greater than 100ppm). E. Protective Chiller Panels (Factory Mounted): 1. Louvered Panels (condenser coils only): Painted steel as per remainder of unit cabinet, over external condenser coil faces. 2. Wire Panels (full unit): Heavy gauge, welded wiremesh, coated to resist corrosion, to protect condenser coils from incidental damage and restrict unauthorized access to internal components. 3. Louvered Panels (full unit): Painted steel as per remainder of unit cabinet, to protect condenser coils from incidental damage, visually screen internal components, and prevent unauthorized access to internal components. 100 4. Louvered/Wire Panels: Louvered steel panels on external condenser coil faces, painted as per remainder of unit cabinet. Heavy gauge, welded wire-mesh, coated to resist corrosion, around base of machine to restrict unauthorized access. F. Evaporator options: 1. Provide 1-½" cooler insulation in lieu of standard ¾". 2. Provide DX Cooler with 300 PSIG (20.7 bar) waterside design working pressure in lieu of standard 150 PSIG (10.3 bar). 3. Provide Raised Face Flanges for cooler nozzles: a. 150 PSIG (10.3 bar), welded flanges (field kit, mate supplied). b. 300 PSIG (20.7 bar), welded flanges (factory installed, no mate supplied). c. 150 PSIG (10.3 bar), Victaulic™ Flanges (field kit, no mate supplied). 4. Provide Chiller in accordance with Pressure Safety codes in lieu of Standard ASME: a. German TÜV construction. b. French CODAP construction. c. Italian ISPESL construction. d. Polish UDT construction. G. Remote Cooler: Manufacturer shall provide separately: chiller less evaporator, evaporator, leaving and return water sensors, and liquid line components (solenoid valves, filter driers, sight glasses, and TXVs), as discrete elements of a complete factory system. Contractor shall field erect system and provide interconnecting refrigerant piping and wiring in accordance with Manufacturer recommendations, and project plans and schedules. Where not otherwise specified, Contractor provided system piping shall be in accordance with applicable sections of ASHRAE Handbook. H. Flow Switch (Field Mounted): Vapor proof SPDT, NEMA 4X switch ( ___150 PSIG (10.3 bar) or ___300 PSIG (20.7 bar)), -20°F to 250°F (-28.9°C to 121.1°C). I. High External Static Pressure Fans and Motors: Factory installed fans and motors for up to 0.4 inches of water (100Pa) external static pressure at nominal condenser air flow. J. Microprocessor Membrane Keypad Graphics on in lieu of Standard English: 1. French language. 2. German language. 3. Spanish language. 4. Italian Language. YORK INTERNATIONAL FORM 201.18-EG1 K. Thermal Storage: Leaving chilled liquid setpoint range for charge cycle from 25°F to 15°F (13.9°C to 8.3°C) minimum, automatic reset setpoint range of 40°F to 50°F (22.2°C to 27.8°C). L. Low Temperature Process Brine: Leaving chilled liquid setpoint range 20°F to 50°F (11.1°C to 27.8°C) [optional range of 15°F to 20°F (8.3°C to 11.1°C)]. M.Building Automation System (EMS) Reset Interface: Chiller to accept 4 to 20mA, 0 to 10 VDC, or discrete contact closure input to reset the leaving chilled liquid temperature, or percent full load amps (current limit). N. Remote Control Panel (Field Mounted): Auxiliary panel for remote user interface for functions normally made at the unit control center O. Multi-Unit Sequence Control (Field Mounted): Separate Sequencing control center provided to permit control of up to eight chillers in parallel based on mixed liquid temperature. P. Sound Reduction (Factory Mounted): 1. Low speed, reduced noise fans 2. Acoustical compressor enclosures Q. Vibration Isolation (Field Mounted): 1. Neoprene Isolators. 2. 1 Inch Deflection Spring Isolators: Level adjustable, spring and cage type isolators for mounting under the unit base rails. YORK INTERNATIONAL 3. 2 Inch Deflection Seismic Isolators: Level adjustable, restrained mounts in rugged welded steel housing with vertical and horizontal limit stops. Housings shall be designed to withstand a minimum 1.0g accelerated force in all directions to 2" (50.8 mm). PART 3 — EXECUTION 3.01 INSTALLATION A. General: Rig and Install in full accordance with Manufacturer’s requirements, Project drawings, and Contract documents. B. Location: Locate chiller as indicated on drawings, including cleaning and service maintenance clearance per Manufacturer instructions. Adjust and level chiller on support structure. C. Components: Installing Contractor shall provide and install all auxiliary devices and accessories for fully operational chiller. D. Electrical: Coordinate electrical requirements and connections for all power feeds with Electrical Contractor (Division 16). E. Controls: Coordinate all control requirements and connections with Controls Contractor. F. Finish: Installing Contractor shall paint damaged and abraded factory finish with touch-up paint matching factory finish. 101 This page intentionally left blank. 102 YORK INTERNATIONAL FORM 201.18-EG1 This page intentionally left blank. YORK INTERNATIONAL 103 Proud Sponsor of the 2000 U.S. Olympic Team 36USC380 P.O. Box 1592, York, Pennsylvania USA 17405-1592 Copyright © by York International Corporation 2000 Form 201.18-EG1 (200) Supersedes: 201.18-EG1 (999) 201.18-EG1 (399) (717) 771-7890 www.york.com Subject to change without notice. Printed in USA ALL RIGHTS RESERVED
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2000:03:14 11:34:17 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2000:04:18 14:46:40-04:00 Title : Form 201.18-EG1 (200), Millennium Air Cooled Screw Liquid Chillers (Style F), Engineering Guide Subject : Form 201.18-EG1 (200), Millennium Air Cooled Screw Liquid Chillers (Style F), Engineering Guide Author : Visual Impact productions, Inc. Keywords : Form 201.18-EG1 (200), Millennium Air Cooled Screw Liquid Chillers (Style F), Engineering Guide Page Count : 104 Page Mode : UseOutlines Page Layout : SinglePageEXIF Metadata provided by EXIF.tools