York Ycjf24 Thru 60 Users Manual 413432 YTG E 0909
YCJF24 THRU 60 to the manual d296f392-34a4-446e-a954-7e73282c7168
2015-02-02
: York Ycjf24-Thru-60-Users-Manual york-ycjf24-thru-60-users-manual-455211 york pdf
Open the PDF directly: View PDF 
.
Page Count: 28
TECHNICAL GUIDE
SPLIT-SYSTEM
AIR CONDITIONERS
14.5 SEER – R-410A
MODELS:
YCJF24 THRU 60
(2 THRU 5 NOMINAL TONS, 1 PHASE)
Due to continuous product improvement, specifications are
subject to change without notice.
Visit us on the web at www.york.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY
Standard 5-year limited parts warranty.
10-year limited compressor warranty.
Extended 10-year limited parts warranty when product is
registered online within 90 days of purchase for replace-
ment or closing for new home construction.
LISTED
413437-YTG-E-0909
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The 14.5 SEER Series unit is the outdoor part of a versatile cli-
mate system. It is designed with a matching indoor coil compo-
nent from Johnson Controls Unitary Products. Available for
typical applications this climate system is supported with acces-
sories and documents to serve specific functions.
FEATURES
•Quality Condenser Coils - The coil is constructed of alumi-
num microchannel tubing and enhanced aluminum fins for
increased efficiency and corrosion protection.
•Protected Compressor - The compressor is internally pro-
tected against high pressure and temperature and externally
by a factory installed high pressure switch. This protects the
compressor if undesirable operating conditions occur. A liq-
uid line filter-drier further protects the compressor.
•Durable Finish - The cabinet is made of pre-painted steel.
The pre-treated galvanized steel provides a better paint to
steel bond, which resists corrosion and rust creep. Special
primer formulas and matted-textured finish insure less fading
when exposed to sunlight.
•Lower Installed Cost - Installation time and costs are
reduced by easy power and control wiring connections.
Available in sweat connect models only. The unit contains
enough refrigerant for matching indoor coils and 15 feet of
interconnecting piping. The small base dimension means
less space is required on the ground or roof.
•Top Discharge - The warm air from the top mounted fan is
blown up away from the structure and any landscaping. This
allows compact location on multi-unit applications.
•Low Operating Sound Level - The upward air flow carries
the normal operating noise away from the living area. The
rigid top panel effectively isolates any motor sound. Isolated
compressor mounts minimize compressor operating sounds.
Additional sound attenuation is provided by a swept-wing fan
blade and compressor blanket.
•Low Maintenance - Long life permanently lubricated motor-
bearings need no annual servicing.
•Easy Service Access - Fully exposed refrigerant connec-
tions, and a single panel covering the electrical controls
make for easy servicing of the unit.
•Secured Service Valves - Secured re-usable service valves
are provided on both the liquid and vapor sweat connections
for ease of evacuating and charging.
•U.L. and C.U.L. listed - approved for outdoor application.
•Agency Listed - U.L. and C.U.L. listed - approved for out-
door application. The unit is certified in accordance with the
Unitary Small Equipment certification program, which is
based on ARI Standard 210/240.
413437-YTG-E-0909
2Johnson Controls Unitary Products
All dimensions are in inches. They are subject to change with-
out notice. Certified dimensions will be provided upon request.
Physical and Electrical Data
MODEL YCJF24S41S1 YCJF30S41S1 YCJF36S41S1 YCJF42S41S1 YCJF48S41S1 YCJF60S41S1
Unit Supply Voltage 208-230V, 1 60Hz
Normal Voltage Range 1187 to 252
Minimum Circuit Ampacity 16.8 18.4 19.1 23.9 27.9 35.9
Max. Overcurrent Device Amps 225 30 30 40 45 60
Min. Overcurrent Device Amps 320 20 20 25 30 40
Compressor Type Scroll Scroll Scroll Scroll Scroll Scroll
Compressor
Amps
Rated Load 12.8 14.1 14.1 17.9 21.1 27.5
Locked Rotor 58 73 77 112 115 135
Crankcase Heater No No No No No No
Fan Motor Amps Rated Load .8 .8 1.5 1.5 1.5 1.5
Fan Diameter Inches 22 22 22 24 24 24
Fan Motor
Rated HP 1/8 1/8 1/4 1/4 1/4 1/4
Nominal RPM 1075 1075 850 850 850 850
Nominal CFM 2750 2800 3200 3600 3600 3700
Coil
Face Area Sq. Ft. 13.1 17.4 17.4 20.0 21.4 24.0
Rows Deep 1 1 1 1 1 1
Fin / Inches 23 23 23 23 23 23
Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8
Vapor Line Set OD (Field Installed) 3/4 3/4 3/4 7/8 7/8 1 1/8
Unit Charge (Lbs. - Oz.) 43 - 2 3 - 7 3 - 10 4 - 4 4 - 9 5 - 9
Charge Per Foot, Oz. 0.62 0.62 0.62 0.67 0.67 0.75
Operating Weight Lbs. 128 130 145 172 180 199
1. Rated in accordance with ARI Standard 110, utilization range “A”.
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
4. The Unit Charge is correct for the outdoor unit, smallest matched evaporator coil and 15 feet of refrigerant tubing. For tubing lengths other
than 15 feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.
B
C
A
Unit
Model
Dimensions
(Inches) Refrigerant Connection
Service Valve Size
A1
1. Including Fan Guard.
B C Liquid Vapor
24 28 29 29
3/8”
3/4”30 36 29 29
36 36 29 29
42 34 33.6 33.6 7/8”
48 36 33.6 33.6
60 40 33.6 33.6 7/8”2
2. Adapter fitting required for 1-1/8” line set.
413437-YTG-E-0909
Johnson Controls Unitary Products 3
PROCEDURES:
1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaporator and 15 feet of interconnecting
line tubing.
2. Verify the TXV or orifice and additional charge required for specific evaporator coil in the system using the above table.
3. Add additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data
Table.
4. For TXV match charge weight needs to be weighed in for specific coil match and lineset length.
5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for evaporator
+ adder for line set.
System Charge for Various Matched Systems
Outdoor Unit YCJF24S41S1 YCJF30S41S1 YCJF36S41S1 YCJF42S41S1 YCJF48S41S1 YCJF60S41S1
Required Orifice or TXV 11TVM4F1 1TVM4G1 1TVM4G1 1TVM4G1 1TVM4J1 1TVM4J1
Factory Charge, lbs-oz 3 - 2 3 - 7 3 - 10 4 - 4 4 - 9 5 - 9
Indoor Coil2,3,4 Additional Charge, oz
FC/MC/PC24 10–––––
FC/MC/PC30 102––––
FC/MC/PC35 16 10 – – – –
FC/MC/PC36 1045–––
FC/MC/PC37 24 19 15 – – –
FC/MC/PC43 24 19 15 5 – –
FC/MC/PC48 40 32 27 17 16 –
FC/MC/PC60 – – – 17 16 0
FC/MC62 – – – 25 26 18
FC64 – – – 303325
UC24 8–––––
UC60 – – 12 – – –
HC30 10–––––
HC36 16 11 8 – – –
HC42 25 19 15 6 – –
HC60 –––000
HD24 16–––––
HD36 18–––––
HD48 51 42 36 24 25 –
HD60 ––––2424
AHP30 16 – – – –
AHP36 – 19 15 – – –
AHX30 16 11 – – – –
AHX36 – 11 15 – – –
AHX42 – 31 27 17 – –
AHX48 – 31 27 17 16 –
AHX60 – – 33222318
AHP/SHP60 ––––1–
AV*24 3–––––
AV*36 251915 – – –
AV/SV*48 ––901–
AV/SV*60 –––010
F4FP030 3–––––
F4FP036 ––5–––
F4FP040 ––8–––
F4FP042 ––8–––
F4FP045 ––9–––
F5FP048 – – 20 10 11 –
F5FP060 – – 20 10 11 –
F4FV060 – – 9 10 1 –
F6FP030 17 11 – – – –
F6FP036 –118 – – –
F6FP042 – 231917 – –
F6FP048 – 23191716 –
F6FP060 – – 33 23 23 18
FOOTNOTES:
1. Systems matched with furnace or air handlers not equipped with blower-off delays may require blower Time Delay Kit 2FD06700224.
2. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.
3. A TXV kit must be used with these coils to obtain system performance. Note: If a TXV is factory installed on the coil, it must be replaced with
the listed TXV.
4. Refer to Technical Guide for actual system performance for specified matches.
413437-YTG-E-0909
4Johnson Controls Unitary Products
COOLING CAPACITY - With Air Handler Coils
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL W RATED
CFM
NET MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH MA
YCJF24S41S1
MA08B 17 FC/MC24B 800 24.8 17.3 14.35 12.15
MA08B 17 FC/MC30B 800 24.8 17.3 14.35 12.15
MA08B 17 FC/MC35B 800 25.0 17.6 14.50 12.25
MA08B 17 FC/MC36B 800 25.0 17.6 14.40 12.25
MA08B 17 FC/MC43B 800 25.2 18.0 14.60 12.35
YCJF30S41S1
MA12B 17 FC/MC30B 1000 28.8 20.6 14.00 12.00
MA12B 17 FC/MC35B 1000 29.0 21.0 14.05 12.00
MA12B 17 FC/MC36B 1000 29.0 21.0 14.00 12.00
MA12B 17 FC/MC43B 1000 29.6 21.6 14.45 12.00
YCJF36S41S1
MA12B 17 FC/MC35B 1200 34.4 25.4 14.20 12.10
MA12B 17 FC/MC36B 1200 34.2 25.0 14.00 12.00
MA12B 17 FC/MC43B 1200 35.2 26.0 14.50 12.30
MA14D 24 FC/MC48D 1200 35.6 26.4 14.65 12.35
YCJF42S41S1
MA16C 21 FC/MC43C 1400 40.5 30.4 14.10 12.10
MA14D 24 FC/MC48D 1400 41.0 30.8 14.40 12.30
MA16C 21 FC/MC48C 1400 41.0 30.8 14.40 12.30
MA14D 24 FC/MC60D 1400 41.0 30.8 14.35 12.10
MA16C 21 FC/MC60C 1400 41.0 30.8 14.35 12.10
MA14D 24 FC/MC62D 1400 41.0 31.0 14.45 12.05
YCJF48S41S1
MA16C 21 FC/MC48C 1600 46.5 32.8 14.50 12.00
MA20D 24 FC/MC48D 1600 46.5 32.8 14.50 12.00
MA16C 21 FC/MC60C 1600 46.5 32.6 14.50 12.00
MA20D 24 FC/MC60D 1600 46.5 32.6 14.50 12.00
MA20D 24 FC/MC62D 1600 47.0 32.8 14.50 12.00
YCJF60S41S1 MA20D 24 FC/MC62D 1800 57.0 39.0 14.00 12.10
14.5 SEER AC WITH MV - VARIABLE SPEED
YCJF24S41S1
MV12B 17 FC/MC24B 800 25.4 17.7 16.00 13.20
MV12B 17 FC/MC30B 800 25.4 17.7 16.00 13.20
MV12B 17 FC/MC35B 800 25.6 18.0 16.00 13.50
MV16C 21 FC/MC35C 800 25.6 18.0 16.00 13.50
MV12B 17 FC/MC36B 800 25.6 18.0 16.00 13.50
MV16C 21 FC/MC36C 800 25.6 18.0 16.00 13.50
MV12B 17 FC/MC43B 800 25.8 18.4 16.10 13.75
MV16C 21 FC/MC43C 800 25.8 18.4 16.10 13.75
MV16C 21 FC/MC48C 800 26.2 18.7 16.50 14.00
YCJF30S41S1
MV12B 17 FC/MC30B 1000 29.4 21.0 15.00 12.85
MV12B 17 FC/MC35B 1000 29.6 21.4 15.25 13.00
MV16C 21 FC/MC35C 1000 29.6 21.4 15.50 13.25
MV12B 17 FC/MC36B 1000 29.6 21.4 15.30 13.15
MV16C 21 FC/MC36C 1000 29.6 21.4 15.50 13.15
MV12B 17 FC/MC43B 1000 30.2 22.0 15.75 13.25
MV16C 21 FC/MC43C 1000 30.2 22.0 16.00 13.50
MV16C 21 FC/MC48C 1000 30.6 22.2 16.00 13.50
MV20D 24 FC/MC48D 1000 30.6 22.2 16.00 13.50
For notes see Page 6.
413437-YTG-E-0909
Johnson Controls Unitary Products 5
14.5 SEER AC WITH MV - VARIABLE SPEED (Continued)
YCJF36S41S1
MV12B 17 FC/MC35B 1200 35.0 25.8 15.00 12.50
MV16C 21 FC/MC35C 1200 35.2 26.0 15.75 13.00
MV12B 17 FC/MC36B 1200 34.8 25.4 15.00 12.75
MV16C 21 FC/MC36C 1200 35.0 25.6 15.50 13.00
MV12B 17 FC/MC43B 1200 35.8 26.4 15.50 13.00
MV16C 21 FC/MC43C 1200 36.0 26.6 16.00 13.25
MV12D 24 FC/MC48D 1150 36.0 26.4 16.00 13.50
MV16C 21 FC/MC48C 1200 36.2 27.0 16.25 14.00
MV20D 24 FC/MC48D 1200 36.2 27.0 16.25 14.00
YCJF42S41S1
MV16C 21 FC/MC43C 1400 41.0 30.8 15.00 12.75
MV16C 21 FC/MC48C 1400 41.5 31.2 15.50 13.00
MV20D 24 FC/MC48D 1400 42.0 31.4 15.50 13.00
MV20D 24 FC/MC60D 1400 41.5 31.4 15.50 13.00
MV20D 24 FC/MC62D 1400 42.0 31.4 15.75 13.00
MV12D 24 FC64D 1155 42.0 30.4 16.00 13.00
MV20D 24 FC64D 1300 42.0 31.4 16.00 13.00
YCJF48S41S1
MV16C 21 FC/MC48C 1600 47.0 33.0 15.25 12.75
MV20D 24 FC/MC48D 1600 47.0 33.0 15.25 12.75
MV20D 24 FC/MC60D 1600 47.0 33.0 15.25 12.75
MV20D 24 FC/MC62D 1600 47.5 33.2 15.25 12.75
MV20D 24 FC64D 1400 48.0 33.6 16.00 13.00
YCJF60S41S1
MV20D 24 FC/MC60D 1800 55.0 39.0 14.00 11.95
MV20D 24 FC/MC62D 1855 56.5 39.5 14.50 1250
MV20D 24 FC64D 1630 57.0 39.0 15.10 12.90
14.5 SEER AC WITH AV / SV / F*FV - VARIABLE SPEED
YCJF24S41S1 AV*24 17 – 800 25.0 18.7 15.75 13.25
AV*36 21 – 725 25.8 18.6 16.25 13.50
YCJF30S41S1 AV*36 21 – 960 30.0 22.4 16.25 13.50
YCJF36S41S1
AV*36 21 – 1190 35.0 25.6 15.75 13.25
AV/SV*48 24 – 1220 35.4 26.2 16.00 13.50
F4FV060 24 – 1200 34.6 25.6 15.50 13.25
YCJF42S41S1
AV/SV*48 24 – 1385 41.5 31.0 15.50 13.00
AV/SV*60 24 – 1360 41.5 31.0 15.65 13.20
F4FV060 24 – 1350 40.0 29.6 15.00 12.50
YCJF48S41S1
AV/SV*48 24 – 1625 47.0 33.4 15.00 12.65
AV/SV*60 24 – 1560 47.0 33.6 15.40 13.00
F4FV060 24 – 1600 44.5 30.6 14.25 12.00
YCJF60S41S1 AV/SV*60 24 – 1730 56.5 38.0 14.25 12.25
14.5 SEER AC WITH AHP / SHP / AHX / F*FP
YCJF24S41S1
AHP24 17 – 850 24.8 17.4 14.30 12.20
AHX30 17 – 820 25.8 19.3 15.75 13.25
F4FP030 17 – 800 24.8 17.2 14.30 12.20
F6FP030 17 – 850 25.6 19.1 15.60 13.10
For notes see Page 6.
14.5 SEER AC WITH AHP / SHP / AHX / F*FP (Continued)
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL W RATED
CFM
NET MBH SEER EER
TOTAL SENS.
413437-YTG-E-0909
6Johnson Controls Unitary Products
— = Not applicable.
YCJF30S41S1
AHP36 21 – 1000 29.6 21.4 14.30 12.20
AHX30 17 – 1025 29.6 22.0 15.25 13.00
AHX36 21 – 1005 30.2 22.6 16.25 13.00
AHX42 21 – 990 30.6 22.8 16.50 13.25
AHX48 24 – 1090 31.0 23.6 16.50 13.25
F6FP030 17 – 1035 29.2 21.8 15.00 12.75
F6FP036 21 – 980 29.2 21.6 15.25 13.00
F6FP042 21 – 1065 30.8 23.4 16.50 13.25
F6FP048 24 – 1055 28.2 21.6 16.25 13.00
YCJF36S41S1
AHP36 21 – 1200 35.4 26.2 15.00 12.50
AHX36 21 – 1225 35.2 26.0 15.50 12.75
AHX42 21 – 1190 35.6 26.2 15.75 13.00
AHX48 24 – 1255 35.8 26.8 15.75 13.00
AHX60 24 – 1300 36.0 27.2 15.75 13.00
F4FP036 21 – 1200 34.2 25.2 14.00 12.00
F4FP040 21 – 1200 34.4 25.0 14.00 12.00
F4FP042 21 – 1200 34.4 25.0 14.00 12.00
F5FP048 24 – 1250 36.4 27.4 16.25 13.50
F5FP060 24 – 1250 34.8 26.0 15.25 13.00
F6FP036 21 – 1210 34.0 24.8 15.50 12.75
F6FP042 21 – 1290 35.6 27.0 15.75 13.00
F6FP048 24 – 1125 33.4 24.0 15.75 13.00
F6FP060 24 – 1240 35.8 26.6 15.75 13.00
YCJF42S41S1
AHX42 21 – 1395 42.0 31.6 15.00 12.50
AHX48 24 – 1445 42.0 32.2 15.25 12.75
AHX60 24 – 1440 42.0 32.2 15.25 12.75
F5FP048 24 – 1450 42.0 32.0 15.50 13.00
F5FP060 24 – 1500 40.0 29.8 14.75 12.50
F6FP042 21 – 1455 42.0 32.0 15.00 12.50
F6FP048 24 – 1380 39.5 29.6 15.25 12.75
F6FP060 24 – 1475 42.5 32.4 15.25 12.75
YCJF48S41S1
AHP/SHP60 24 – 1600 44.0 30.6 14.20 12.00
AHX48 24 – 1660 47.5 34.4 14.75 12.50
AHX60 24 – 1680 48.0 34.4 15.00 12.50
F5FP048 24 – 1700 47.5 34.0 15.00 12.75
F5FP060 24 – 1700 44.5 31.2 14.00 12.00
F6FP048 24 – 1625 44.5 31.2 14.75 12.50
F6FP060 24 – 1710 48.0 34.8 15.00 12.50
YCJF60S41S1 AHX60 24 – 1570 55.5 37.2 14.50 12.50
F6FP060 24 – 1710 56.5 39.0 14.25 12.25
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210.
Cooling MBH based on 8°F entering air temperature, 50% RH, and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTU’s at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total electric power
input in watt-hours during the same period.
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL W RATED
CFM
NET MBH SEER EER
TOTAL SENS.
413437-YTG-E-0909
Johnson Controls Unitary Products 7
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils
UNIT MODEL
FURNACE** COIL
MODEL
COOLING
CFM RANGE
(Min.-max.) WRATED
CFM
NET MBH SEER1EER
TOTAL SENS.
YCJF24S41S1
600 - 1000 14,17 FC/MC/PC24 800 24.8 17.3 14.00 12.00
600 - 1000 14,17 FC/MC/PC30 800 24.8 17.3 14.00 12.00
600 - 1000 14 FC/MC/PC32 800 25 17.6 14.50 12.35
600 - 1000 17,21 FC/MC/PC35 800 25 17.6 14.50 12.35
600 - 1000 14,17,21 FC/MC/PC36 800 25 17.6 14.00 12.00
600 - 1000 14 FC/MC/PC37 800 25.4 17.9 14.50 12.35
600 - 1000 17,21 FC/MC/PC43 800 25.2 18 14.70 12.50
600 - 1000 21 FC/MC/PC48 800 25.6 18.3 14.80 12.65
600 - 1000 14 HC18 800 24.2 16.7 14.00 12.00
600 - 1000 14 HC30 800 24.8 17.4 14.00 12.00
600 - 1000 17 HC36 800 25 17.6 14.00 12.00
600 - 1000 21 HC42 800 25.4 18 14.50 12.35
600 - 1000 14,17 HD24 800 25.4 17.7 14.50 12.35
600 - 1000 14,17,21 HD36 800 24.8 17 14.00 12.00
600 - 1000 21 HD48 800 25.6 17.9 14.50 12.35
600 - 1000 14,17 UC24 800 25 17.5 14.00 12.00
600 - 1000 14,17 UC30 800 25 17.5 14.00 12.00
YCJF30S41S1
800 - 1200 14,17 FC/MC/PC30 1000 28.8 20.6 14.00 12.00
800 - 1200 14,17 FC/MC/PC32 1000 29 21 14.00 12.00
800 - 1200 17,21 FC/MC/PC35 1000 29 21 14.00 12.00
800 - 1200 14,17,21 FC/MC/PC36 1000 29 21 14.00 12.00
800 - 1200 14 FC/MC/PC37 1000 29.6 21.6 14.50 12.35
800 - 1200 17,21 FC/MC/PC43 1000 29.6 21.6 14.50 12.35
800 - 1200 21,24 FC/MC/PC48 1000 30 21.8 14.50 12.35
800 - 1200 17 HC36 1000 29 21 14.00 12.00
800 - 1200 21 HC42 1000 29.6 21.6 14.25 12.10
800 - 1200 14,17,21 HD36 1000 28.8 20.2 14.00 12.00
800 - 1200 21,24 HD48 1000 29.8 21.4 14.50 12.35
800 - 1200 14,17 UC30 1000 29 20.8 14.00 12.00
YCJF36S41S1
1000 - 1400 17,21 FC/MC/PC35 1200 33.6 24.6 14.00 11.90
1000 - 1400 14,17,21 FC/MC/PC36 1200 33.4 24.2 14.00 11.85
1000 - 1400 14 FC/MC/PC37 1200 34.4 25.2 14.50 12.20
1000 - 1400 17,21 FC/MC/PC43 1200 34.4 25.2 14.50 12.20
1000 - 1400 21,24 FC/MC/PC48 1200 34.6 25.4 14.50 12.25
1000 - 1400 17 HC36 1200 33.6 24.6 14.00 11.90
1000 - 1400 21 HC42 1200 34.4 25.2 14.50 12.20
1000 - 1400 14,17,21,24 HD48 1200 34.6 25 14.50 12.20
1000 - 1400 21,24 UC60 1200 33.2 23.8 14.00 11.75
YCJF42S41S1
1200 - 1600 17,21 FC/MC/PC43 1400 40.5 30.4 14.00 12.00
1200 - 1600 21,24 FC/MC/PC48 1400 41.0 30.8 14.50 12.30
1200 - 1600 21,24 FC/MC/PC60 1400 41.0 30.8 14.50 12.30
1200 - 1600 21 HC42 1400 40.5 30.4 14.00 12.00
1200 - 1600 14,17,21,24 HD48 1400 41.0 30.4 14.25 12.10
1200 - 1600 21,24 HD60 1400 41.5 31.2 14.50 12.30
1200 - 1600 21,24 FC/MC62 1400 41.0 31.0 14.50 12.30
YCJF48S41S1
1400 - 1800 21,24 FC/MC/PC48 1600 46.5 32.8 14.25 12.10
1400 - 1800 21,24 FC/MC/PC60 1600 46.5 32.6 14.50 12.35
1400 - 1800 14,17,21,24 HD48 1600 46.5 32.6 14.50 12.35
1400 - 1800 14,17,21,24 HD60 1600 47.5 33.2 14.50 12.35
1400 - 1800 21,24 FC/MC62 1600 47.0 32.8 14.50 12.35
YCJF60S41S1
1600 - 2000 21,24 FC/MC/PC60 1800 54.5 38.5 13.80 11.90
1600 - 2000 24 HC60 1800 54.5 38.5 13.50 11.65
1600 - 2000 24 FC/MC62 1800 55.5 38.5 14.00 12.05
1. Requires a 2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
** Refer to Quick Selection Chart for specific furnace match-up.
413437-YTG-E-0909
8Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces
UNIT
MODEL FURNACE
MODEL COIL
MODEL1W
COOLING
RATED
CFM
Net MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH VARIABLE SPEED FURNACES2
YCJF24S41S1
T*(8,L)X*A12 FC/MC/PC24A 14 775 25.4 18.6 15.50 13.20
T*(8,L)X*B12 FC/MC/PC24B 17 835 25.6 19.1 15.75 13.25
T*9X*B12 FC/MC/PC24B 17 775 25.4 18.6 15.70 13.20
T*(8,L)X*A12 FC/MC/PC30A 14 775 25.4 18.6 15.75 13.25
T*(8,L)X*B12 FC/MC/PC30B 17 835 25.6 19.1 15.75 13.25
T*9X*B12 FC/MC/PC30B 17 775 25.4 18.6 15.75 13.25
T*(8,L)X*A12 FC/MC/PC32A 14 800 25.8 19.1 15.75 13.25
T*(8,L)X*B12 FC/MC/PC35B 17 850 26.0 19.3 15.75 13.25
T*(8,L)X*C16 FC/MC/PC35C 21 625 24.6 17.2 15.75 13.25
T*(8,L)X*C20 FC/MC/PC35C 21 885 26.2 20.0 15.75 13.50
T*9X*B12 FC/MC/PC35B 17 785 25.8 19.3 15.75 13.25
T*9X*C16 FC/MC/PC35C 21 715 25.2 18.3 15.75 13.25
T*9X*C20 FC/MC/PC35C 21 825 25.8 19.2 15.75 13.50
T*(8,L)X*A12 FC/MC/PC36A 14 815 25.8 19.2 16.00 13.50
T*(8,L)X*B12 FC/MC/PC36B 17 835 26.0 19.4 15.75 13.50
T*(8,L)X*C16 FC/MC/PC36C 21 675 25.0 17.8 15.75 13.50
T*9X*B12 FC/MC/PC36B 17 775 25.4 18.5 15.75 13.25
T*9X*C16 FC/MC/PC36C 21 770 25.6 18.6 15.75 13.50
T*9X*C20 FC/MC/PC36C 21 810 25.8 19.1 15.75 13.50
T*(8,L)X*A12 FC/MC/PC37A 14 840 26.4 20.0 16.00 13.50
T*(8,L)X*B12 FC/MC/PC43B 17 865 26.6 20.2 16.00 13.50
T*(8,L)X*C16 FC/MC/PC43C 21 655 25.2 17.9 16.00 13.50
T*9X*B12 FC/MC/PC43B 17 800 26.2 19.5 16.00 13.50
T*9X*C16 FC/MC/PC43C 21 735 25.8 18.8 16.00 13.50
T*9X*C20 FC/MC/PC43C 21 790 26.2 19.4 15.75 13.25
T*(8,L)X*C16 FC/MC/PC48C 21 685 25.6 18.4 15.75 13.25
T*9X*C16 FC/MC/PC48C 21 770 26.2 19.5 15.75 13.25
T*9X*C20 FC/MC/PC48C 21 815 26.8 20.2 15.75 13.25
T*(8,L)X*A12 UC24A 14 785 25.4 18.4 16.00 13.50
T*(8,L)X*B12 UC24B 17 805 25.8 19.0 16.00 13.50
T*9X*B12 UC24B 17 775 25.4 18.4 15.75 13.25
T*(8,L)X*A12 UC30A 14 785 25.8 18.9 15.75 13.25
T*(8,L)X*B12 UC30B 17 820 25.8 18.9 15.75 13.25
T*9X*B12 UC30B 17 775 25.8 18.9 15.75 13.25
T*(8,L)X*A12 UC36A 14 780 23.8 17.5 15.25 13.00
T*(8,L)X*B12 UC36B 17 760 24.0 17.6 15.25 13.00
T*(8,L)X*C16 UC36C 21 675 23.2 16.6 15.25 13.00
T*9X*B12 UC36B 17 775 23.8 17.5 15.25 13.00
T*9X*C16 UC36C 21 770 23.8 17.6 15.25 13.00
T*9X*C20 UC36C 21 810 24.2 17.8 15.25 13.00
T*(8,L)X*A12 HD36 14 775 20.8 17.4 15.25 13.00
T*(8,L)X*B12 HD36 17 855 25.8 19.1 15.50 13.25
T*(8,L)X*C16 HD36 21 695 19.7 15.9 15.50 13.25
T*9X*B12 HD36 17 790 25.4 18.3 15.25 13.00
Y*(8,L)C*A12 FC/MC/PC24A 14 805 24.0 16.8 15.75 13.25
Y*(8,L)C*B12 FC/MC/PC24B 17 815 24.0 16.8 15.75 13.25
(Y*9C/T*9V)*B12 FC/MC/PC24B 17 790 24.0 16.8 15.75 13.25
Y*(8,L)C*A12 FC/MC/PC30A 14 805 24.0 16.8 15.75 13.25
Y*(8,L)C*B12 FC/MC/PC30B 17 815 24.0 16.8 15.75 13.25
(Y*9C/T*9V)*B12 FC/MC/PC30B 17 790 24.0 16.8 15.75 13.25
Y*(8,L)C*A12 FC/MC/PC32A 14 775 24.0 16.8 15.50 13.25
Y*(8,L)C*B12 FC/MC/PC35B 17 760 24.0 16.8 15.75 13.25
For notes see Page 15.
413437-YTG-E-0909
Johnson Controls Unitary Products 9
YCJF24S41S1
(Y*9C/T*9V)*B12 FC/MC/PC35B 17 815 24.0 17.0 15.75 13.25
Y*(8,L)C*A12 FC/MC/PC36A 14 805 24.0 17.0 16.00 13.50
Y*(8,L)C*B12 FC/MC/PC36B 17 765 24.0 16.7 15.75 13.50
(Y*9C/T*9V)*B12 FC/MC/PC36B 17 815 24.0 17.1 15.75 13.50
Y*(8,L)C*A12 FC/MC/PC37A 14 805 24.0 16.9 16.00 13.50
Y*(8,L)C*B12 FC/MC/PC43B 17 760 24.0 16.7 16.00 13.50
(Y*9C/T*9V)*B12 FC/MC/PC43B 17 800 24.0 16.8 16.00 13.50
Y*(8,L)C*A12 HC30 14 775 24.0 16.8 15.75 13.25
Y*(8,L)C*B12 HC36 17 760 24.0 16.7 15.75 13.50
(Y*9C/T*9V)*B12 HC36 17 815 24.0 17.0 15.75 13.50
Y*(8,L)C*A12 HD36 14 805 24.0 16.4 16.00 13.50
Y*(8,L)C*B12 HD36 17 760 24.0 16.2 15.75 13.25
Y*(8,L)C*C16 HD36 21 855 24.0 16.7 16.00 13.50
Y*(8,L)C*C20 HD36 21 750 24.0 16.1 15.75 13.25
(Y*9C/T*9V)*B12 HD36 17 815 24.0 16.4 15.75 13.25
(Y*9C/T*9V)*C16 HD36 21 785 24.0 16.4 16.00 13.50
(Y*9C/T*9V)*C20 HD36 21 760 24.0 16.1 15.75 13.25
Y*(8,L)C*A12 UC24A 14 805 24.0 16.9 16.00 13.50
Y*(8,L)C*B12 UC24B 17 815 24.0 16.9 16.00 13.25
(Y*9C/T*9V)*B12 UC24B 17 790 24.0 16.9 16.00 13.25
Y*(8,L)C*A12 UC30A 14 805 24.0 16.8 15.75 13.25
Y*(8,L)C*B12 UC30B 17 815 24.0 16.8 15.75 13.25
(Y*9C/T*9V)*B12 UC30B 17 790 24.0 16.8 15.75 13.25
Y*(8,L)C*A12 UC36A 14 805 24.0 16.8 15.25 13.00
Y*(8,L)C*B12 UC36B 17 765 24.0 16.8 15.00 13.00
(Y*9C/T*9V)*B12 UC36B 17 815 24.0 16.9 15.25 13.00
YCJF30S41S1
T*(8,L)X*A12 FC/MC/PC30A 14 1075 29.4 22.2 15.00 12.75
T*(8,L)X*B12 FC/MC/PC30B 17 945 29.2 21.4 15.25 13.00
T*9X*B12 FC/MC/PC30B 17 1080 29.6 22.2 15.00 12.75
T*(8,L)X*A12 FC/MC/PC32A 14 970 29.2 21.4 15.25 13.00
T*(8,L)X*B12 FC/MC/PC35B 17 1120 30.0 22.8 15.75 13.25
T*(8,L)X*C16 FC/MC/PC35C 21 1105 30.0 23.0 15.75 13.25
T*(8,L)X*C20 FC/MC/PC35C 21 850 29.0 20.8 15.75 13.25
T*9X*B12 FC/MC/PC35B 17 1085 30.0 22.6 15.00 13.00
T*9X*C16 FC/MC/PC35C 21 1075 30.0 22.6 15.00 13.00
T*9X*C20 FC/MC/PC35C 21 685 27.4 19.0 14.50 12.30
T*(8,L)X*A12 FC/MC/PC36A 14 995 29.2 21.4 15.00 12.75
T*(8,L)X*B12 FC/MC/PC36B 17 1090 29.8 22.6 15.50 13.00
T*(8,L)X*C16 FC/MC/PC36C 21 1100 30.0 22.8 15.75 13.25
T*(8,L)X*C20 FC/MC/PC36C 21 890 29.2 21.2 15.75 13.25
T*9X*B12 FC/MC/PC36B 17 1070 29.8 22.4 15.50 13.00
T*9X*C16 FC/MC/PC36C 21 1070 29.8 22.4 15.50 13.00
T*9X*C20 FC/MC/PC36C 21 735 28.0 19.6 15.25 12.75
T*(8,L)X*A12 FC/MC/PC37A 14 1105 30.6 23.4 15.25 13.00
T*(8,L)X*B12 FC/MC/PC43B 17 1125 30.8 23.6 16.00 13.50
T*(8,L)X*C16 FC/MC/PC43C 21 710 28.4 19.7 16.00 13.50
T*(8,L)X*C20 FC/MC/PC43C 21 870 29.8 21.4 16.00 13.50
T*9X*B12 FC/MC/PC43B 17 1095 30.6 23.4 16.00 13.25
T*9X*C16 FC/MC/PC43C 21 1055 30.6 23.0 16.00 13.25
T*9X*C20 FC/MC/PC43C 21 720 28.4 19.6 16.00 13.25
T*(8,L)X*C16 FC/MC/PC48C 21 730 29.0 20.2 16.25 13.25
T*(8,L)X*C20 FC/MC/PC48C 21 890 30.0 22.0 16.25 13.25
For notes see Page 15.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE
MODEL COIL
MODEL1W
COOLING
RATED
CFM
Net MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH VARIABLE SPEED FURNACES2
413437-YTG-E-0909
10 Johnson Controls Unitary Products
YCJF30S41S1
T*9X*C16 FC/MC/PC48C 21 1075 30.8 23.4 16.00 13.25
T*9X*C20 FC/MC/PC48C 21 745 29.0 20.2 16.00 13.25
T*9X*D20 FC/MC/PC48D 24 780 29.2 20.6 16.00 13.25
T*(8,L)X*A12 UC30A 14 1035 29.4 21.8 15.25 13.00
T*(8,L)X*B12 UC30B 17 1110 29.8 22.6 15.50 13.25
T*9X*B12 UC30B 17 1080 29.8 22.2 15.25 13.00
T*(8,L)X*A12 HD36 14 1115 29.8 22.8 15.00 12.75
T*(8,L)X*B12 HD36 17 1120 30.0 23.0 15.50 13.00
T*(8,L)X*C16 HD36 21 1120 30.0 22.6 15.50 13.00
Y*(8,L)C*A12 FC/MC/PC30A 14 1090 29.4 21.6 14.50 12.25
Y*(8,L)C*B12 FC/MC/PC30B 17 955 29.0 20.8 15.25 13.00
(Y*9C/T*9V)*B12 FC/MC/PC30B 17 1050 29.6 21.8 15.00 13.00
Y*(8,L)C*A12 FC/MC/PC32A 14 1045 29.2 21.6 14.50 12.25
Y*(8,L)C*B12 FC/MC/PC35B 17 995 29.4 21.6 15.50 13.00
(Y*9C/T*9V)*B12 FC/MC/PC35B 17 1045 29.4 21.8 15.00 12.50
Y*(8,L)C*C16 FC/MC/PC35C 21 1025 29.6 22.0 15.75 13.25
Y*(8,L)C*C20 FC/MC/PC35C 21 1080 29.6 22.4 15.75 13.25
(Y*9C/T*9V)*C16 FC/MC/PC35C 21 1005 29.6 22.0 15.75 13.25
(Y*9C/T*9V)*C20 FC/MC/PC35C 21 985 29.6 22.0 15.75 13.25
Y*(8,L)C*A12 FC/MC/PC36A 14 1000 29.4 21.4 15.25 12.75
Y*(8,L)C*B12 FC/MC/PC36B 17 985 29.4 21.4 15.50 13.00
(Y*9C/T*9V)*B12 FC/MC/PC36B 17 985 29.4 21.4 15.50 13.00
Y*(8,L)C*C16 FC/MC/PC36C 21 1020 29.6 21.6 15.75 13.25
Y*(8,L)C*C20 FC/MC/PC36C 21 1055 29.6 21.8 15.75 13.25
(Y*9C/T*9V)*C16 FC/MC/PC36C 21 1005 29.6 21.6 15.75 13.25
(Y*9C/T*9V)*C20 FC/MC/PC36C 21 1045 29.6 21.6 15.75 13.25
Y*(8,L)C*A12 FC/MC/PC37A 14 980 29.8 21.6 15.00 12.75
Y*(8,L)C*B12 FC/MC/PC43B 17 990 30.0 22.0 15.50 13.00
(Y*9C/T*9V)*B12 FC/MC/PC43B 17 1035 29.8 21.8 15.25 12.75
Y*(8,L)C*C16 FC/MC/PC43C 21 990 30.0 22.0 16.25 13.50
Y*(8,L)C*C20 FC/MC/PC43C 21 1000 30.0 22.0 16.25 13.75
(Y*9C/T*9V)*C16 FC/MC/PC43C 21 1030 30.0 22.0 15.50 13.25
(Y*9C/T*9V)*C20 FC/MC/PC43C 21 995 30.0 22.0 16.00 13.50
Y*(8,L)C*C16 FC/MC/PC48C 21 1010 30.0 22.2 16.50 13.75
Y*(8,L)C*C20 FC/MC/PC48C 21 1040 30.0 22.2 16.50 13.75
(Y*9C/T*9V)*C16 FC/MC/PC48C 21 990 30.0 22.2 16.25 13.50
(Y*9C/T*9V)*C20 FC/MC/PC48C 21 965 30.0 22.2 16.25 13.50
(Y*9C/T*9V)*D20 FC/MC/PC48D 24 1085 30.0 22.6 16.25 13.50
Y*(8,L)C*B12 HC36 17 995 29.4 21.4 15.25 13.00
(Y*9C/T*9V)*B12 HC36 17 1045 29.4 21.8 15.00 12.50
Y*(8,L)C*C16 HC42 21 990 30.0 22.0 16.25 13.50
Y*(8,L)C*C20 HC42 21 1000 30.0 22.0 16.25 13.75
(Y*9C/T*9V)*C16 HC42 21 1030 30.0 22.0 15.50 13.25
(Y*9C/T*9V)*C20 HC42 21 995 30.0 22.0 15.75 12.75
Y*(8,L)C*A12 HD36 14 1000 29.0 20.6 15.00 12.75
Y*(8,L)C*B12 HD36 17 985 29.2 20.6 15.50 13.00
Y*(8,L)C*C16 HD36 21 1020 29.2 20.8 15.75 13.00
Y*(8,L)C*C20 HD36 21 1055 29.6 21.4 15.75 13.25
(Y*9C/T*9V)*B12 HD36 17 985 29.2 20.6 15.25 12.75
(Y*9C/T*9V)*C16 HD36 21 1005 29.2 20.8 15.75 13.25
(Y*9C/T*9V)*C20 HD36 21 1045 29.2 20.6 15.50 13.00
Y*(8,L)C*A12 UC30A 14 1090 29.4 21.8 14.75 12.50
Y*(8,L)C*B12 UC30B 17 955 29.0 21.0 15.50 13.00
For notes see Page 15.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE
MODEL COIL
MODEL1W
COOLING
RATED
CFM
Net MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH VARIABLE SPEED FURNACES2
413437-YTG-E-0909
Johnson Controls Unitary Products 11
YCJF36S41S1
T*(8,L)X*B12 FC/MC/PC35B 17 1290 34.6 25.8 15.25 12.75
T*(8,L)X*C16 FC/MC/PC35C 21 1105 34.0 24.4 15.50 12.75
T*(8,L)X*C20 FC/MC/PC35C 21 1225 34.4 25.4 15.50 12.75
T*9X*B12 FC/MC/PC35B 17 1265 34.2 25.2 14.75 12.25
T*9X*C16 FC/MC/PC35C 21 1270 34.4 25.2 15.25 12.75
T*9X*C20 FC/MC/PC35C 21 1195 34.4 25.2 15.25 12.75
T*(8,L)X*A12 FC/MC/PC36A 14 1185 34.0 24.4 14.50 12.25
T*(8,L)X*B12 FC/MC/PC36B 17 1255 34.2 25.2 15.00 12.50
T*(8,L)X*C16 FC/MC/PC36C 21 1100 33.8 24.2 15.25 12.75
T*(8,L)X*C20 FC/MC/PC36C 21 1265 34.4 25.6 15.25 12.75
T*9X*B12 FC/MC/PC36B 17 1245 34.0 24.4 14.75 12.25
T*9X*C16 FC/MC/PC36C 21 1275 34.4 25.4 15.25 12.75
T*9X*C20 FC/MC/PC36C 21 1195 34.2 24.6 15.25 12.75
T*(8,L)X*A12 FC/MC/PC37A 14 1290 35.4 26.4 15.25 12.75
T*(8,L)X*B12 FC/MC/PC43B 17 1300 35.2 26.6 15.50 13.00
T*(8,L)X*C16 FC/MC/PC43C 21 1175 35.2 25.8 15.50 13.00
T*(8,L)X*C20 FC/MC/PC43C 21 1250 35.4 26.4 15.50 13.00
T*9X*B12 FC/MC/PC43B 17 1270 35.2 26.4 15.25 12.75
T*9X*C16 FC/MC/PC43C 21 1260 35.2 26.4 15.50 13.00
T*9X*C20 FC/MC/PC43C 21 1185 35.0 25.8 15.50 13.00
T*(8,L)X*C16 FC/MC/PC48C 21 1185 35.8 26.4 16.25 13.25
T*(8,L)X*C20 FC/MC/PC48C 21 1270 35.6 26.2 16.25 13.25
T*9X*C16 FC/MC/PC48C 21 1280 35.6 26.8 16.00 13.00
T*9X*C20 FC/MC/PC48C 21 1205 35.6 26.2 16.00 13.00
T*9X*D20 FC/MC/PC48D 24 1240 35.6 26.2 16.00 13.00
T*(8,L)X*C16 HD48 21 1120 34.6 25.4 16.00 13.00
T*(8,L)X*C20 HD48 21 1245 35.2 26.2 16.00 13.00
T*9X*C16 HD48 21 1255 33.6 26.6 15.75 12.75
T*9X*C20 HD48 21 1245 35.2 26.2 15.75 12.75
T*9X*D20 HD48 24 1260 35.2 26.2 15.75 12.75
T*(8,L)X*C16 UC60C 21 1185 34.0 24.6 15.50 12.75
T*(8,L)X*C20 UC60D 21 1295 34.6 25.8 15.50 12.75
T*9X*C16 FC/PC60C 21 1275 34.2 25.6 15.50 12.75
T*9X*C20 FC/PC60C 21 1240 33.8 24.4 15.50 12.75
T*9X*D20 UC60D 24 1285 34.4 25.6 15.50 12.75
Y*(8,L)C*B12 FC/MC/PC35B 17 1220 34.0 24.6 14.50 12.00
(Y*9C/T*9V)*B12 FC/MC/PC35B 17 1190 33.8 24.6 14.50 12.00
Y*(8,L)C*C16 FC/MC/PC35C 21 1235 34.4 25.2 15.25 12.50
Y*(8,L)C*C20 FC/MC/PC35C 21 1170 34.4 25.0 15.50 12.75
(Y*9C/T*9V)*C16 FC/MC/PC35C 21 1215 34.2 25.2 15.25 12.50
(Y*9C/T*9V)*C20 FC/MC/PC35C 21 1285 34.4 25.8 14.75 12.25
Y*(8,L)C*A12 FC/MC/PC36A 14 1190 33.4 24.4 14.50 12.00
Y*(8,L)C*B12 FC/MC/PC36B 17 1220 33.6 24.4 14.75 12.25
(Y*9C/T*9V)*B12 FC/MC/PC36B 17 1165 33.6 24.4 15.00 12.50
Y*(8,L)C*C16 FC/MC/PC36C 21 1235 34.0 25.0 15.50 12.75
Y*(8,L)C*C20 FC/MC/PC36C 21 1240 34.2 25.2 15.50 12.75
(Y*9C/T*9V)*C16 FC/MC/PC36C 21 1185 34.0 25.0 15.50 12.75
(Y*9C/T*9V)*C20 FC/MC/PC36C 21 1285 34.4 25.4 15.00 12.50
Y*(8,L)C*A12 FC/MC/PC37A 14 980 33.6 23.4 15.00 12.50
Y*(8,L)C*B12 FC/MC/PC43B 17 1210 34.6 25.4 14.75 12.25
(Y*9C/T*9V)*B12 FC/MC/PC43B 17 1200 34.6 25.4 14.75 12.25
Y*(8,L)C*C16 FC/MC/PC43C 21 1205 35.0 25.8 15.75 13.00
For notes see Page 15.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE
MODEL COIL
MODEL1W
COOLING
RATED
CFM
Net MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH VARIABLE SPEED FURNACES2
413437-YTG-E-0909
12 Johnson Controls Unitary Products
YCJF36S41S1
Y*(8,L)C*C20 FC/MC/PC43C 21 1190 35.0 25.6 15.75 13.00
(Y*9C/T*9V)*C16 FC/MC/PC43C 21 1240 34.8 25.6 15.25 12.75
(Y*9C/T*9V)*C20 FC/MC/PC43C 21 1200 35.0 25.6 15.50 13.00
Y*(8,L)C*C16 FC/MC/PC48C 21 1210 35.6 26.2 16.00 13.25
Y*(8,L)C*C20 FC/MC/PC48C 21 1155 35.6 26.4 16.25 13.50
(Y*9C/T*9V)*C16 FC/MC/PC48C 21 1195 35.4 26.2 15.75 13.00
(Y*9C/T*9V)*C20 FC/MC/PC48C 21 1330 35.8 27.2 15.50 12.75
(Y*9C/T*9V)*D20 FC/MC/PC60D 24 1225 35.2 26.0 15.95 13.35
(Y*9C/T*9V)*D20 FC/MC62D 24 1235 35.6 26.4 16.00 13.50
Y*(8,L)C*C16 FC/PC60C 21 1195 35.4 26.0 16.25 13.55
Y*(8,L)C*C20 FC/PC60C 21 1215 35.4 26.0 16.20 13.50
(Y*9C/T*9V)*C16 FC/PC60C 21 1235 35.0 25.8 15.50 13.00
(Y*9C/T*9V)*C20 FC/PC60C 21 1330 35.6 27.2 15.65 13.15
Y*(8,L)C*C16 HC42 21 1205 35.0 25.8 15.75 13.00
Y*(8,L)C*C20 HC42 21 1190 35.0 25.8 16.00 13.25
(Y*9C/T*9V)*C16 HC42 21 1240 34.8 25.6 15.00 12.50
(Y*9C/T*9V)*C20 HC42 21 1200 35.0 25.6 15.50 12.75
Y*(8,L)C*B12 HD48 17 1210 34.8 25.6 15.25 12.50
Y*(8,L)C*C16 HD48 21 1210 35.2 25.8 16.00 13.25
Y*(8,L)C*C20 HD48 21 1155 35.2 26.0 16.00 13.25
(Y*9C/T*9V)*B12 HD48 17 1150 34.8 25.6 15.25 12.50
(Y*9C/T*9V)*C16 HD48 21 1195 35.0 25.8 15.75 13.00
(Y*9C/T*9V)*C20 HD48 21 1325 35.4 26.4 15.25 12.75
Y*(8,L)C*C16 UC60C 21 1195 34.2 24.6 15.75 13.15
Y*(8,L)C*C20 UC60C 21 1215 34.2 24.6 15.70 13.10
(Y*9C/T*9V)*C16 UC60C 21 1235 33.8 24.4 15.00 12.55
(Y*9C/T*9V)*C20 UC60C 21 1285 34.4 25.6 15.15 12.70
(Y*9C/T*9V)*D20 UC60D 24 1225 34.0 24.6 15.45 12.90
YCJF42S41S1
T*(8,L)X*B12 FC/MC/PC43B 17 1300 40.5 30.0 14.75 12.50
T*(8,L)X*C16 FC/MC/PC43C 21 1475 41.5 31.8 14.75 12.50
T*(8,L)X*C20 FC/MC/PC43C 21 1415 41.5 31.4 14.75 12.50
T*9X*B12 FC/MC/PC43B 17 1270 40.0 29.0 14.50 12.25
T*9X*C16 FC/MC/PC43C 21 1410 41.5 31.0 14.75 12.50
T*9X*C20 FC/MC/PC43C 21 1400 41.5 31.2 14.75 12.50
T*(8,L)X*C16 FC/MC/PC48C 21 1360 42.0 31.2 15.25 12.75
T*(8,L)X*C20 FC/MC/PC48C 21 1475 42.0 31.8 15.25 12.75
T*9X*C16 FC/MC/PC48C 21 1425 42.0 31.8 15.00 12.50
T*9X*C20 FC/MC/PC48C 21 1420 42.0 31.8 15.00 12.50
T*9X*D20 FC/MC/PC48D 24 1435 42.0 31.8 15.00 12.50
T*(8,L)X*C16 FC/PC60C 21 1360 41.5 31.4 15.00 12.50
T*(8,L)X*C20 FC/MC/PC60D 21 1485 41.5 31.4 15.00 12.50
T*9X*C16 FC/PC60C 21 1460 41.5 31.2 14.75 12.50
T*9X*C20 FC/PC60C 21 1460 41.5 31.4 15.00 12.75
T*9X*D20 FC/MC/PC60D 24 1515 42.0 32.2 15.00 12.75
T*(8,L)X*C16 FC64D 21 1360 42.0 31.8 16.00 13.00
T*(8,L)X*C20 FC64D 21 1485 42.0 32.6 16.00 13.00
T*9X*C16 FC64D 21 1460 42.0 31.8 16.00 13.00
T*9X*C20 FC64D 21 1460 42.0 31.8 16.00 13.00
T*9X*D20 FC64D 24 1225 42.0 30.4 16.00 13.00
T*(8,L)X*C16 HD48 21 1340 41.5 31.0 15.00 12.75
T*9X*C16 HD48 21 1465 42.0 31.6 14.75 12.50
T*9X*C20 HD48 21 1465 42.0 31.8 14.75 12.50
For notes see Page 15.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE
MODEL COIL
MODEL1W
COOLING
RATED
CFM
Net MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH VARIABLE SPEED FURNACES2
413437-YTG-E-0909
Johnson Controls Unitary Products 13
YCJF42S41S1
T*9X*D20 HD48 24 1460 47.5 27.4 14.75 12.50
T*(8,L)X*C16 UC48C 21 1400 40.0 29.8 14.90 12.65
T*(8,L)X*C20 UC48C 21 1515 40.5 30.8 14.90 12.65
T*9X*C16 UC48C 21 1425 39.5 29.6 14.50 12.25
T*9X*C20 UC48C 21 1420 40.0 29.6 14.50 12.25
T*9X*D20 UC48D 24 1435 40.0 29.8 14.50 12.25
Y*(8,L)C*C16 FC/MC/PC43C 21 1425 41.5 30.8 14.50 12.50
Y*(8,L)C*C20 FC/MC/PC43C 21 1450 41.5 30.8 14.50 12.50
(Y*9C/T*9V)*C16 FC/MC/PC43C 21 1360 41.0 30.8 14.50 12.50
(Y*9C/T*9V)*C20 FC/MC/PC43C 21 1395 41.5 30.8 14.50 12.50
Y*(8,L)C*C16 FC/MC/PC48C 21 1435 42.0 31.4 15.25 13.00
Y*(8,L)C*C20 FC/MC/PC48C 21 1410 42.0 31.4 15.50 13.25
(Y*9C/T*9V)*C16 FC/MC/PC48C 21 1395 42.0 31.4 15.25 13.00
(Y*9C/T*9V)*C20 FC/MC/PC48C 21 1430 42.0 31.4 15.00 12.75
(Y*9C/T*9V)*D20 FC/MC/PC48D 24 1450 42.0 31.4 15.25 13.00
(Y*9C/T*9V)*D20 FC/MC/PC60D 24 1445 42.0 31.2 15.30 13.05
(Y*9C/T*9V)*D20 FC/MC62D 24 1455 42.0 31.6 15.50 13.20
Y*(8,L)C*C16 FC/PC60C 21 1420 42.0 31.4 15.45 13.15
Y*(8,L)C*C20 FC/PC60C 21 1410 42.0 31.4 15.70 13.40
(Y*9C/T*9V)*C16 FC/PC60C 21 1445 41.5 31.0 14.75 12.60
(Y*9C/T*9V)*C20 FC/PC60C 21 1445 41.5 31.2 15.10 12.90
Y*(8,L)C*C16 FC64D 21 1420 42.0 31.8 16.00 13.00
Y*(8,L)C*C20 FC64D 21 1410 42.0 31.8 16.00 13.00
(Y*9C/T*9V)*C16 FC64D 21 1445 42.0 31.8 15.25 12.65
(Y*9C/T*9V)*C20 FC64D 21 1445 42.0 31.8 16.00 13.00
(Y*9C/T*9V)*D20 FC64D 24 1235 42.0 30.4 16.00 13.00
(Y*9C/T*9V)*D20 FC64D 24 1235 42.0 30.4 16.00 13.00
Y*(8,L)C*C16 HC42 21 1425 41.5 30.8 15.00 12.50
Y*(8,L)C*C20 HC42 21 1450 41.5 30.8 15.00 12.50
(Y*9C/T*9V)*C16 HC42 21 1360 41.0 30.8 14.75 12.50
(Y*9C/T*9V)*C20 HC42 21 1395 41.5 30.8 14.75 12.50
Y*(8,L)C*B12 HD48 17 1350 41.0 29.8 14.75 12.50
Y*(8,L)C*C16 HD48 21 1435 41.5 30.8 15.25 13.00
Y*(8,L)C*C20 HD48 21 1410 42.0 31.0 15.25 13.00
(Y*9C/T*9V)*B12 HD48 17 1150 40.0 28.2 14.75 12.50
(Y*9C/T*9V)*C16 HD48 21 1395 41.5 30.8 15.00 12.75
(Y*9C/T*9V)*C20 HD48 21 1430 41.5 30.8 14.75 12.50
(Y*9C/T*9V)*D20 HD48 24 1450 41.5 30.8 15.00 12.75
Y*(8,L)C*C16 HD60 21 1420 42.0 31.4 15.55 13.30
Y*(8,L)C*C20 HD60 21 1410 42.0 31.4 15.85 13.50
(Y*9C/T*9V)*C16 HD60 21 1445 42.0 31.2 14.85 12.75
(Y*9C/T*9V)*C20 HD60 21 1445 42.0 31.4 15.20 13.00
(Y*9C/T*9V)*D20 HD60 24 1445 42.0 31.4 15.40 13.15
Y*(8,L)C*C16 UC48C 21 1435 40.5 30.8 14.90 12.65
Y*(8,L)C*C20 UC48C 21 1410 40.5 31.0 15.10 12.80
(Y*9C/T*9V)*C16 UC48C 21 1395 40.0 30.8 14.70 12.45
(Y*9C/T*9V)*C20 UC48C 21 1430 40.0 30.8 14.60 12.40
(Y*9C/T*9V)*D20 UC48D 24 1450 40.0 30.8 14.80 12.60
Y*(8,L)C*C16 UC60C 21 1420 40.5 29.8 15.00 12.75
Y*(8,L)C*C20 UC60C 21 1410 40.5 30.0 15.30 13.00
(Y*9C/T*9V)*C16 UC60C 21 1445 40.0 29.6 14.35 12.25
(Y*9C/T*9V)*C20 UC60C 21 1445 40.5 29.6 14.65 12.50
(Y*9C/T*9V)*D20 UC60D 24 1445 40.5 29.8 14.90 12.65
For notes see Page 15.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE
MODEL COIL
MODEL1W
COOLING
RATED
CFM
Net MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH VARIABLE SPEED FURNACES2
413437-YTG-E-0909
14 Johnson Controls Unitary Products
YCJF48S41S1
T*(8,L)X*C16 FC/MC/PC48C 21 1600 47.0 33.8 14.50 12.25
T*(8,L)X*C20 FC/MC/PC48C 21 1660 47.5 33.8 14.75 12.50
T*9X*C16 FC/MC/PC48C 21 1565 47.0 33.8 14.50 12.25
T*9X*C20 FC/MC/PC48C 21 1615 47.5 33.8 14.75 12.50
T*9X*D20 FC/MC/PC48D 24 1635 47.0 33.8 14.50 12.25
T*(8,L)X*C16 FC/PC60C 21 1605 47.0 33.2 14.50 12.25
T*(8,L)X*C20 FC/MC/PC60D 21 1595 47.0 33.4 14.75 12.50
T*9X*C16 FC/PC60C 21 1575 44.5 33.2 14.50 12.25
T*9X*C20 FC/PC60C 21 1625 44.5 33.4 14.75 12.50
T*9X*D20 FC/MC/PC60D 24 1490 46.5 32.8 15.00 12.75
T*(8,L)X*C16 FC/MC62D 21 1610 47.5 34.2 15.00 12.75
T*(8,L)X*C20 FC/MC62D 21 1665 48.0 34.4 15.00 12.75
T*(8,L)X*C16 FC64D 21 1360 48.0 33.6 16.00 13.00
T*(8,L)X*C20 FC64D 21 1485 48.0 34.4 15.70 12.80
T*9X*C16 FC64D 21 1460 47.5 33.4 15.25 12.50
T*9X*C20 FC64D 21 1460 48.0 33.6 15.50 12.75
T*9X*D20 FC64D 24 1425 48.0 33.6 16.00 13.00
T*(8,L)X*C16 HD48 21 1610 48.0 33.6 14.75 12.25
T*(8,L)X*C20 HD48 21 1665 48.5 33.8 14.75 12.25
T*9X*C16 HD48 21 1575 48.0 33.6 14.50 12.00
T*9X*C20 HD48 21 1625 48.0 33.8 14.50 12.00
T*9X*D20 HD48 24 1645 48.0 33.6 14.50 12.00
T*(8,L)X*C16 HD60 21 1610 45.5 34.0 14.25 12.00
T*(8,L)X*C20 HD60 21 1665 45.5 34.2 14.25 12.00
T*9X*C16 HD60 21 1575 45.5 34.0 14.25 12.00
T*9X*C20 HD60 21 1625 45.5 34.2 14.25 12.00
T*9X*D20 HD60 24 1645 45.5 34.0 14.25 12.00
Y*(8,L)C*C16 FC/MC/PC48C 21 1615 47.0 33.0 14.75 12.50
Y*(8,L)C*C20 FC/MC/PC48C 21 1640 47.0 33.0 14.75 12.50
(Y*9C/T*9V)*C16 FC/MC/PC48C 21 1590 46.5 32.8 14.75 12.50
(Y*9C/T*9V)*C20 FC/MC/PC48C 21 1655 46.5 32.8 14.75 12.50
(Y*9C/T*9V)*D20 FC/MC/PC48D 24 1645 46.5 33.0 14.75 12.50
Y*(8,L)C*C16 FC/PC60C 21 1625 47.0 33.0 15.00 12.75
Y*(8,L)C*C20 FC/PC60C 21 1605 47.0 33.2 15.25 13.00
(Y*9C/T*9V)*C16 FC/PC60C 21 1590 47.0 33.0 14.75 12.50
(Y*9C/T*9V)*C20 FC/PC60C 21 1655 47.0 33.0 14.75 12.50
(Y*9C/T*9V)*D20 FC/MC/PC60D 24 1615 47.0 33.0 14.75 12.50
Y*(8,L)C*C20 FC/MC62D 21 1615 47.5 33.6 15.40 13.00
(Y*9C/T*9V)*C20 FC/MC62D 21 1655 47.0 33.2 14.75 12.50
(Y*9C/T*9V)*D20 FC/MC62D 24 1630 47.0 33.4 15.00 12.75
Y*(8,L)C*C16 FC64D 21 1420 47.5 33.4 15.25 12.50
Y*(8,L)C*C20 FC64D 21 1410 47.5 33.4 16.00 13.00
(Y*9C/T*9V)*C16 FC64D 21 1445 47.0 33.2 15.00 12.50
(Y*9C/T*9V)*C20 FC64D 21 1445 47.5 33.2 15.25 12.75
(Y*9C/T*9V)*D20 FC64D 24 1455 47.5 33.4 15.85 12.85
(Y*9C/T*9V)*D20 HC60 24 1615 45.0 32.4 14.50 12.00
Y*(8,L)C*C16 HD48 21 1615 46.5 32.6 14.75 12.25
Y*(8,L)C*C20 HD48 21 1640 46.5 32.6 14.75 12.25
(Y*9C/T*9V)*C16 HD48 21 1590 46.5 32.4 14.50 12.25
(Y*9C/T*9V)*C20 HD48 21 1655 46.5 32.4 14.50 12.25
(Y*9C/T*9V)*D20 HD48 24 1645 46.5 32.6 14.50 12.25
Y*(8,L)C*C16 HD60 21 1625 47.0 33.6 15.00 12.50
Y*(8,L)C*C20 HD60 21 1605 47.0 33.6 15.50 13.00
For notes see Page 15.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE
MODEL COIL
MODEL1W
COOLING
RATED
CFM
Net MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH VARIABLE SPEED FURNACES2
413437-YTG-E-0909
Johnson Controls Unitary Products 15
YCJF48S41S1
(Y*9C/T*9V)*C16 HD60 21 1590 47.0 33.4 14.75 12.50
(Y*9C/T*9V)*C20 HD60 21 1655 47.0 33.4 14.75 12.50
(Y*9C/T*9V)*D20 HD60 24 1615 47.0 33.4 14.75 12.50
YCJF60S41S1
T*(8,L)X*C20 FC/PC60C 21 1605 55.0 37.2 13.75 11.80
T*(8,L)X*C20 FC/MC62D 21 1665 56.0 37.8 14.50 12.50
T*9X*C20 FC/MC62D 21 1595 55.0 37.0 14.50 12.50
T*9X*D20 FC/MC62D 24 1645 55.5 37.6 14.50 12.50
T*(8,L)X*C16 FC64D 21 1610 56.5 38.5 14.90 12.25
T*(8,L)X*C20 FC64D 21 1665 57.0 39.5 15.15 12.50
T*9X*C16 FC64D 21 1550 56.0 38.0 14.75 12.25
T*9X*C20 FC64D 21 1595 56.5 38.5 15.05 12.50
T*9X*D20 FC64D 24 1610 56.5 38.5 14.75 12.25
Y*(8,L)C*C20 FC/MC/PC60D 21 1595 55.0 37.2 13.90 11.90
(Y*9C/T*9V)*C20 FC/PC60C 21 1575 55.0 37.2 13.75 11.80
(Y*9C/T*9V)*D20 FC/PC60C 21 1560 55.0 37.2 13.75 11.80
(Y*9C/T*9V)*D20 FC/MC/PC60D 24 1630 55.0 37.2 13.75 11.80
Y*(8,L)C*C20 FC/MC62D 21 1615 55.5 37.2 14.50 12.50
(Y*9C/T*9V)*C20 FC/MC62D 21 1655 55.5 37.2 14.00 12.20
(Y*9C/T*9V)*D20 FC/MC62D 24 1630 55.5 37.2 14.50 12.50
Y*(8,L)C*C16 FC64D 21 1635 56.5 39.0 14.75 12.25
Y*(8,L)C*C20 FC64D 21 1615 56.5 38.5 15.05 12.50
(Y*9C/T*9V)*C16 FC64D 21 1590 56.0 38.0 14.50 12.30
(Y*9C/T*9V)*C20 FC64D 21 1655 56.5 38.5 14.50 12.00
(Y*9C/T*9V)*D20 FC64D 24 1630 56.5 38.5 14.50 12.00
(Y*9C/T*9V)*D20 HC60 24 1615 53.5 36.8 14.00 12.00
Y*(8,L)C*C20 HD60 21 1605 56.5 37.8 14.50 12.50
(Y*9C/T*9V)*C20 HD60 21 1655 56.5 38.5 14.25 12.25
(Y*9C/T*9V)*D20 HD60 24 1615 55 37.4 14.25 12.25
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. Variable speed furnaces have B.O.D (Blower on Delay) standard.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL FURNACE
MODEL COIL
MODEL1W
COOLING
RATED
CFM
Net MBH SEER EER
TOTAL SENS.
14.5 SEER AC WITH VARIABLE SPEED FURNACES2
413437-YTG-E-0909
16 Johnson Controls Unitary Products
ACCESSORIES
Refer to Price Manual for specific model numbers.
Off Cycle Timer Delay - Provides a 5-minute off cycle to pre-
vent rapid recycling of the compressor.
Hard Start Kit - Required when using TXV indoor coil. Also,
provides increased starting torque for areas with low voltage.
Thermostats - Compatible thermostat controls are available
through accessory sourcing. For optimum performance and
installation, refer to the UPGNET “Low Voltage Wiring Diagram”
document to select and apply controls.
SOUND POWER RATINGS*
* Rated in accordance with ARI 270-95 Standards.
TYPICAL INSTALLATION
TYPICAL FIELD WIRING
Model Source 1 Kit numbers
24 S1-2SA06704006
30 S1-2SA06704006
36 S1-2SA06704006
42 S1-2SA06704006
48 S1-2SA06708006
60 S1-2SA06707906
UNIT MODEL (dBA)
24 72
30 71
36 71
42 75
48 74
60 74
THERMOSTAT
SEAL OPENING(S) WITH
PERMAGUM OR EQUIVALENT
TO INDOOR COIL
TO FURNACE OR
AIR HANDLER
TERMINAL BLOCK
NEC CLASS 2 WIRING
NEC CLASS 1 WIRING
ALL OUTDOOR WIRING
MUST BE WEATHERPROOF. CONTROL
ACCESS
PANEL
WEATHERPROOF
DISCONNECT
SWITCH
MINIMUM 24” SERVICE
ACCESS CLEARANCE
ON ONE SIDE
48” OVERHEAD
CLEARANCE
10” CLEARANCE
AROUND PERIMETER
NOTE:
ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES
POWER WIRING
208/230-1-60
CONTACTOR
TERMINALS
COIL
GND.
LUG
CYRGW
YRGW
POWER WIRING
CONTROL WIRING
FACTORY WIRING
24 VOLT CONTROL WIRING
MINIMUM 18 GA. WIRE
(NEC CLASS 2)
FURNACE OR AIR HANDLER TERMINAL BLOCK
ROOM THERMOSTAT
CONDENSING UNIT
ALL OUTDOOR WIRING MUST BE WEATHERPROOF. USE COPPER CONDUCTORS ONLY.
TERMINAL W IS ONLY
REQUIRED ON SYSTEMS
WITH HEAT.
*
*
413437-YTG-E-0909
Johnson Controls Unitary Products 17
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Continued on next page.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. YCJF24S41S1
INDOOR COIL MODEL NO. FC/MC/PC32
CONDENSING
ENTERING AIR
TEMPERATURE
IDCFM 600 800 1000
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65
T.C. 21.8 23.8 23.8 25.7 27.7 23.9 25.4 25.3 27.6 29.5 26.1 27.1 26.9 29.4 31.4
S.C. 16.3 16.3 16.3 16.1 14.4 16.3 16.3 16.3 16.2 15.3 16.3 16.3 16.3 16.3 16.2
KW 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2
75
T.C. 21.0 23.0 22.9 24.9 26.8 23.1 24.6 24.4 26.6 28.6 25.3 26.1 25.9 28.4 30.4
S.C. 16.3 16.3 15.8 15.7 13.9 16.3 16.3 16.0 16.0 14.9 16.3 16.3 16.3 16.3 15.9
KW 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4
85
T.C. 20.2 22.2 22.0 24.1 25.9 22.4 23.7 23.5 25.7 27.7 24.5 25.2 24.9 27.3 29.5
S.C. 16.3 16.3 15.2 15.3 13.4 16.3 16.3 15.8 15.8 14.4 16.3 16.3 16.3 16.3 15.5
KW 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
95
T.C. 19.5 21.4 21.2 23.3 25.0 21.6 22.8 22.6 24.8 26.8 23.7 24.2 23.9 26.3 28.5
S.C. 16.3 16.3 14.7 15.0 12.9 16.3 16.3 15.5 15.6 14.0 16.3 16.3 16.3 16.3 15.1
KW 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
105
T.C. 18.4 20.1 19.9 22.0 23.7 20.4 21.4 21.1 23.4 25.2 22.4 22.6 22.4 24.7 26.8
S.C. 16.3 15.9 14.0 14.2 12.2 16.3 16.1 15.2 15.3 13.3 16.3 16.3 16.3 16.3 14.4
KW 2.2 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.2
115
T.C. 17.4 18.8 18.6 20.7 22.3 19.3 19.9 19.7 21.9 23.7 21.2 21.0 20.9 23.1 25.1
S.C. 16.3 15.4 13.4 13.5 11.6 16.3 15.9 14.8 14.9 12.6 16.3 16.3 16.3 16.3 13.6
KW 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
125
T.C. 16.3 17.5 17.3 19.3 20.9 18.1 18.4 18.3 20.4 22.2 19.9 19.4 19.3 21.6 23.4
S.C. 16.3 15.0 12.7 12.8 10.9 16.3 15.7 14.5 14.6 11.9 16.3 16.3 16.3 16.3 12.9
KW 2.9 2.9 2.9 2.9 2.8 2.9 2.9 2.9 2.8 2.8 2.8 2.8 2.9 2.8 2.8
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Air Handlers Coils T.C. S.C. KW
– FC/MC/PC24 1.02 1.04 1.02
– FC/MC/PC30 1.02 1.04 1.02
– FC/MC/PC35 1.02 1.06 1.02
– FC/MC/PC36 1.02 1.06 1.02
– FC/MC/PC37 1.04 1.08 1.02
– FC/MC/PC43 1.03 1.08 1.02
– FC/MC/PC48 1.05 1.10 1.02
– HC24 0.99 1.00 1.02
– HC30 1.01 1.04 1.02
– HC36 1.02 1.06 1.02
– HC42 1.04 1.08 1.02
– HD24 1.04 1.07 1.02
– HD36 1.01 1.02 1.02
– HD48 1.05 1.07 1.02
– UC24 1.02 1.05 1.02
– UC30 1.02 1.05 1.02
AHP24 – 1.01 1.04 1.01
AV24 – 1.02 1.05 0.93
AV36 – 1.05 1.09 0.93
AHX30 – 1.05 1.11 0.94
F6FP030 – 1.05 1.10 0.96
F4FP030 – 1.02 1.04 1.02
MA08B FC/MC24B 1.02 1.04 1.02
MV12B FC/MC24B 1.04 1.07 0.94
MA08B FC/MC30B 1.02 1.04 1.02
MV12B FC/MC30B 1.04 1.07 0.94
MA08B FC/MC35B 1.02 1.06 1.02
MV12B FC/MC35B 1.05 1.08 0.93
MV16C FC/MC35C 1.05 1.08 0.93
MA08B FC/MC36B 1.02 1.06 1.02
MV12B FC/MC36B 1.05 1.08 0.93
MV16C FC/MC36C 1.05 1.08 0.93
MA08B FC/MC43B 1.03 1.08 1.02
MV12B FC/MC43B 1.06 1.10 0.94
MV16C FC/MC43C 1.06 1.10 0.93
MV16C FC/MC48C 1.07 1.12 0.93
Air Handlers Coils T.C. S.C. KW
413437-YTG-E-0909
18 Johnson Controls Unitary Products
Furnaces Coils T.C. S.C. KW
T*(8,L)X*A12 FC/MC/PC24A 1.04 1.07 0.92
T*(8,L)X*B12 FC/MC/PC24B 1.05 1.10 0.92
T*9X*B12 FC/MC/PC24B 1.04 1.07 0.92
T*(8,L)X*A12 FC/MC/PC30A 1.04 1.07 0.92
T*(8,L)X*B12 FC/MC/PC30B 1.05 1.10 0.92
T*9X*B12 FC/MC/PC30B 1.04 1.07 0.92
T*(8,L)X*A12 FC/MC/PC32A 1.05 1.10 0.92
T*(8,L)X*A12 UC24A 1.04 1.06 0.92
T*(8,L)X*B12 UC24B 1.05 1.09 0.92
T*9X*B12 UC24B 1.04 1.06 0.92
T*(8,L)X*A12 UC30A 1.05 1.09 0.92
T*(8,L)X*B12 UC30B 1.05 1.09 0.92
T*9X*B12 UC30B 1.05 1.09 0.92
T*(8,L)X*A12 FC/MC/PC36A 1.06 1.11 0.92
T*(8,L)X*B12 FC/MC/PC36B 1.06 1.12 0.92
T*(8,L)X*C16 FC/MC/PC36C 1.02 1.03 0.90
T*9X*B12 FC/MC/PC36B 1.04 1.06 0.92
T*9X*C16 FC/MC/PC36C 1.04 1.07 0.90
T*9X*C20 FC/MC/PC36C 1.06 1.10 0.92
T*(8,L)X*A12 UC36A 0.97 1.01 0.92
T*(8,L)X*B12 UC36B 0.98 1.02 0.89
T*(8,L)X*C16 UC36C 0.95 0.96 0.91
T*9X*B12 UC36B 0.97 1.01 0.92
T*9X*C16 UC36C 0.98 1.01 0.90
T*9X*C20 UC36C 0.99 1.02 0.92
T*(8,L)X*B12 FC/MC/PC35B 1.06 1.11 0.92
T*(8,L)X*C16 FC/MC/PC35C 1.00 0.99 0.91
T*(8,L)X*C20 FC/MC/PC35C 1.07 1.15 0.92
T*9X*B12 FC/MC/PC35B 1.06 1.11 0.92
T*9X*C16 FC/MC/PC35C 1.03 1.05 0.91
T*9X*C20 FC/MC/PC35C 1.06 1.11 0.92
T*(8,L)X*A12 FC/MC/PC37A 1.08 1.15 0.92
T*(8,L)X*B12 FC/MC/PC43B 1.09 1.16 0.92
T*(8,L)X*C16 FC/MC/PC43C 1.03 1.03 0.91
T*9X*B12 FC/MC/PC43B 1.07 1.12 0.92
T*9X*C16 FC/MC/PC43C 1.06 1.08 0.91
T*9X*C20 FC/MC/PC43C 1.07 1.12 0.93
T*(8,L)X*C16 FC/MC/PC48C 1.05 1.06 0.91
T*9X*C16 FC/MC/PC48C 1.07 1.12 0.91
T*9X*C20 FC/MC/PC48C 1.09 1.16 0.93
T*(8,L)X*A12 HD36 0.85 1.00 0.92
T*(8,L)X*B12 HD36 1.05 1.10 0.92
T*(8,L)X*C16 HD36 0.80 0.92 0.91
T*9X*B12 HD36 1.04 1.05 0.92
Y*(8,L)C*A12 FC/MC/PC24A 0.96 0.96 0.93
Y*(8,L)C*B12 FC/MC/PC24B 0.96 0.96 0.92
(Y*9C/T*9V)*B12 FC/MC/PC24B 0.96 0.96 0.93
Y*(8,L)C*A12 FC/MC/PC30A 0.96 0.96 0.93
Y*(8,L)C*B12 FC/MC/PC30B 0.96 0.96 0.92
(Y*9C/T*9V)*B12 FC/MC/PC30B 0.96 0.96 0.93
Y*(8,L)C*A12 FC/MC/PC32A 0.96 0.96 0.93
Y*(8,L)C*B12 FC/MC/PC35B 0.96 0.96 0.92
(Y*9C/T*9V)*B12 FC/MC/PC35B 0.96 0.97 0.94
Y*(8,L)C*A12 FC/MC/PC36A 0.96 0.97 0.93
Y*(8,L)C*B12 FC/MC/PC36B 0.96 0.95 0.91
(Y*9C/T*9V)*B12 FC/MC/PC36B 0.96 0.98 0.93
Y*(8,L)C*A12 FC/MC/PC37A 0.96 0.96 0.94
Y*(8,L)C*B12 FC/MC/PC43B 0.96 0.95 0.92
(Y*9C/T*9V)*B12 FC/MC/PC43B 0.96 0.96 0.93
Y*(8,L)C*A12 HC30 0.96 0.96 0.93
Y*(8,L)C*B12 HC36 0.96 0.95 0.92
(Y*9C/T*9V)*B12 HC36 0.96 0.97 0.94
Y*(8,L)C*A12 HD36 0.96 0.94 0.93
Y*(8,L)C*B12 HD36 0.96 0.93 0.92
Y*(8,L)C*C16 HD36 0.96 0.95 0.92
Y*(8,L)C*C20 HD36 0.96 0.92 0.90
(Y*9C/T*9V)*B12 HD36 0.96 0.94 0.92
(Y*9C/T*9V)*C16 HD36 0.96 0.94 0.91
(Y*9C/T*9V)*C20 HD36 0.96 0.92 0.90
Y*(8,L)C*A12 UC24A 0.96 0.97 0.93
Y*(8,L)C*B12 UC24B 0.96 0.97 0.92
(Y*9C/T*9V)*B12 UC24B 0.96 0.97 0.93
Y*(8,L)C*A12 UC30A 0.96 0.96 0.93
Y*(8,L)C*B12 UC30B 0.96 0.96 0.92
(Y*9C/T*9V)*B12 UC30B 0.96 0.96 0.93
Y*(8,L)C*A12 UC36A 0.96 0.96 0.92
Y*(8,L)C*B12 UC36B 0.96 0.96 0.90
(Y*9C/T*9V)*B12 UC36B 0.96 0.97 0.92
Furnaces Coils T.C. S.C. KW
413437-YTG-E-0909
Johnson Controls Unitary Products 19
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Continued on next page.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. YCJF30S41S1
INDOOR COIL MODEL NO. FC/MC/PC43
CONDENSING
ENTERING AIR
TEMPERATURE
IDCFM 800 1000 1200
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65
T.C. 28.2 30.1 29.9 32.9 35.2 29.8 31.3 31.2 34.1 36.4 31.5 32.5 32.6 35.3 37.5
S.C. 27.1 24.4 21.3 20.9 17.2 29.1 27.4 23.5 23.3 18.9 31.1 30.4 25.8 25.7 20.6
KW 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4
75
T.C. 27.3 28.8 28.7 31.4 33.9 28.8 30.0 29.9 32.6 35.0 30.3 31.2 31.0 33.8 36.1
S.C. 26.2 24.0 20.7 20.4 16.6 28.0 26.7 23.0 22.8 18.3 29.9 29.5 25.2 25.1 19.9
KW 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
85
T.C. 26.4 27.5 27.6 29.9 32.5 27.8 28.7 28.6 31.1 33.6 29.2 29.8 29.5 32.3 34.8
S.C. 25.2 23.5 20.2 19.9 16.0 26.9 26.1 22.4 22.2 17.6 28.7 28.7 24.6 24.5 19.2
KW 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
95
T.C. 25.5 26.2 26.5 28.4 31.1 26.8 27.4 27.2 29.6 32.3 28.1 28.5 28.0 30.8 33.4
S.C. 24.3 23.0 19.6 19.3 15.4 25.9 25.4 21.8 21.6 17.0 27.5 27.9 24.0 23.9 18.5
KW 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0
105
T.C. 23.9 24.5 24.6 26.9 29.5 25.3 25.9 25.4 28.0 30.6 26.6 27.3 26.2 29.1 31.7
S.C. 22.8 21.7 18.5 18.7 15.0 24.5 24.1 20.7 21.1 16.6 26.2 26.6 22.9 23.4 18.2
KW 2.5 2.5 2.5 2.4 2.3 2.4 2.4 2.4 2.4 2.3 2.4 2.4 2.4 2.4 2.3
115
T.C. 22.3 22.7 22.9 25.4 28.0 23.8 24.4 23.6 26.5 29.0 25.2 26.0 24.4 27.5 30.0
S.C. 21.4 20.5 17.4 18.1 14.6 23.2 22.9 19.6 20.5 16.2 24.9 25.3 21.8 23.0 17.8
KW 2.9 2.9 2.9 2.7 2.7 2.8 2.8 2.8 2.7 2.7 2.7 2.7 2.8 2.7 2.7
125
T.C. 20.8 21.0 21.1 24.0 26.4 22.3 22.9 21.9 24.9 27.4 23.8 24.8 22.7 25.9 28.3
S.C. 20.0 19.3 16.3 17.4 14.1 21.9 21.6 18.5 20.0 15.8 23.7 24.0 20.7 22.5 17.5
KW 3.3 3.3 3.3 3.1 3.0 3.2 3.2 3.2 3.1 3.0 3.0 3.0 3.2 3.0 3.0
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Air Handlers Coils T.C. S.C. KW
– FC/MC/PC30 0.97 0.95 1.00
– FC/MC/PC32 0.98 0.98 1.00
– FC/MC/PC35 0.98 0.98 1.00
– FC/MC/PC36 0.98 0.97 1.00
– FC/MC/PC37 1.00 1.00 1.00
– FC/MC/PC42 0.94 0.95 1.00
– FC/MC/PC48 1.01 1.01 1.00
– FC/MC/PC60 1.00 1.01 1.00
– HC36 0.98 0.98 1.00
– HC42 1.00 1.00 1.00
– HD36 0.97 0.94 1.00
– HD48 1.01 0.99 1.00
– UC30 0.98 0.96 1.00
AHP36 – 1.00 1.00 1.00
AV36 – 1.03 1.04 0.92
AHX30 – 1.00 1.00 0.94
AHX36 – 1.02 1.04 0.91
AHX42 – 1.04 1.04 0.90
AHX48 – 1.05 1.08 0.90
AV*36 – 1.02 1.02 0.90
F6FP030 – 0.99 1.00 0.97
F6FP036 – 0.99 0.99 0.92
F6FP042 – 1.04 1.07 0.92
F6FP048 – 0.96 0.98 0.93
MA12B FC/MC30B 0.97 0.95 1.00
MV12B FC/MC30B 0.99 0.97 0.93
MA12B FC/MC35B 0.98 0.98 1.00
MV12B FC/MC35B 1.00 0.99 0.93
MV16C FC/MC35C 1.00 1.00 0.93
MA12B FC/MC36B 0.98 0.97 1.00
MV12B FC/MC36B 1.00 0.99 0.93
MV16C FC/MC36C 1.00 0.99 0.93
MA12B FC/MC43B 1.00 1.00 1.00
MV12B FC/MC43B 1.02 1.02 0.93
MV16C FC/MC43C 1.02 1.02 0.92
MV16C FC/MC48C 1.03 1.03 0.92
MV20D FC/MC48D 1.03 1.03 0.93
Air Handlers Coils T.C. S.C. KW
413437-YTG-E-0909
20 Johnson Controls Unitary Products
Furnaces Coils T.C. S.C. KW
T*(8,L)X*A12 FC/MC/PC30A 1.00 1.01 0.94
T*(8,L)X*B12 FC/MC/PC30B 0.99 0.98 0.91
T*9X*B12 FC/MC/PC30B 1.00 1.02 0.94
T*(8,L)X*A12 FC/MC/PC32A 0.99 0.98 0.95
T*(8,L)X*B12 FC/MC/PC35B 1.02 1.04 0.94
T*(8,L)X*C16 FC/MC/PC35C 1.02 1.05 0.92
T*(8,L)X*C20 FC/MC/PC35C 0.98 0.95 0.89
T*9X*B12 FC/MC/PC35B 1.01 1.03 0.94
T*9X*C16 FC/MC/PC35C 1.01 1.03 0.93
T*9X*C20 FC/MC/PC35C 0.93 0.87 0.89
T*(8,L)X*A12 FC/MC/PC36A 0.99 0.98 0.94
T*(8,L)X*B12 FC/MC/PC36B 1.01 1.03 0.94
T*(8,L)X*C16 FC/MC/PC36C 1.02 1.04 0.92
T*(8,L)X*C20 FC/MC/PC36C 0.99 0.97 0.89
T*9X*B12 FC/MC/PC36B 1.01 1.02 0.94
T*9X*C16 FC/MC/PC36C 1.01 1.03 0.93
T*9X*C20 FC/MC/PC36C 0.94 0.90 0.89
T*(8,L)X*A12 FC/MC/PC37A 1.04 1.07 0.94
T*(8,L)X*B12 FC/MC/PC43B 1.04 1.08 0.94
T*(8,L)X*C16 FC/MC/PC43C 0.96 0.90 0.87
T*(8,L)X*C20 FC/MC/PC43C 1.01 0.98 0.89
T*9X*B12 FC/MC/PC43B 1.04 1.07 0.94
T*9X*C16 FC/MC/PC43C 1.03 1.05 0.93
T*9X*C20 FC/MC/PC43C 0.96 0.90 0.89
T*(8,L)X*C16 FC/MC/PC48C 0.98 0.92 0.87
T*(8,L)X*C20 FC/MC/PC48C 1.02 1.00 0.89
T*9X*C16 FC/MC/PC48C 1.05 1.07 0.93
T*9X*C20 FC/MC/PC48C 0.98 0.92 0.89
T*9X*D20 FC/MC/PC48D 0.99 0.94 0.89
T*(8,L)X*A12 UC30A 1.00 1.00 0.94
T*(8,L)X*B12 UC30B 1.01 1.03 0.94
T*9X*B12 UC30B 1.01 1.02 0.94
T*(8,L)X*A12 UC36A 0.92 0.91 0.94
T*(8,L)X*B12 UC36B 0.94 0.94 0.94
T*(8,L)X*C16 UC36C 0.89 0.84 0.87
T*(8,L)X*C20 UC36C 1.00 0.99 0.89
T*(8,L)X*B12 UC42B 0.92 0.90 0.94
T*(8,L)X*C16 UC42C 0.88 0.84 0.87
T*(8,L)X*C20 UC42C 0.91 0.87 0.88
T*9X*B12 UC42B 0.92 0.90 0.93
T*9X*C16 UC42C 0.92 0.90 0.93
T*9X*C20 UC42C 0.86 0.83 0.89
T*(8,L)X*C16 UC48C 0.90 0.89 0.87
T*(8,L)X*C20 UC48C 0.94 0.96 0.88
T*9X*C16 UC48C 0.94 0.97 0.93
T*9X*C20 UC48C 0.88 0.85 0.89
T*9X*D20 UC48D 0.89 0.86 0.89
T*(8,L)X*A12 HD36 1.01 1.04 0.94
T*(8,L)X*B12 HD36 1.02 1.05 0.93
T*(8,L)X*C16 HD36 1.02 1.04 0.92
T*9X*B12 HD36 1.01 1.01 0.93
Y*(8,L)C*A12 FC/MC/PC30A 0.99 1.00 0.97
Y*(8,L)C*B12 FC/MC/PC30B 0.98 0.97 0.92
(Y*9C/T*9V)*B12 FC/MC/PC30B 1.00 1.01 0.95
Y*(8,L)C*A12 FC/MC/PC32A 0.99 1.00 0.99
Y*(8,L)C*B12 FC/MC/PC35B 0.99 1.00 0.94
(Y*9C/T*9V)*B12 FC/MC/PC35B 1.00 1.01 0.97
Y*(8,L)C*C16 FC/MC/PC35C 1.00 1.01 0.93
Y*(8,L)C*C20 FC/MC/PC35C 1.00 1.04 0.93
(Y*9C/T*9V)*C16 FC/MC/PC35C 1.00 1.01 0.93
(Y*9C/T*9V)*C20 FC/MC/PC35C 1.00 1.01 0.93
Y*(8,L)C*A12 FC/MC/PC36A 0.99 0.99 0.95
Y*(8,L)C*B12 FC/MC/PC36B 1.00 0.99 0.93
(Y*9C/T*9V)*B12 FC/MC/PC36B 0.99 0.99 0.94
Y*(8,L)C*C16 FC/MC/PC36C 1.00 1.00 0.92
Y*(8,L)C*C20 FC/MC/PC36C 1.00 1.00 0.92
(Y*9C/T*9V)*C16 FC/MC/PC36C 1.00 1.00 0.92
(Y*9C/T*9V)*C20 FC/MC/PC36C 1.00 1.00 0.93
Y*(8,L)C*A12 FC/MC/PC37A 1.01 1.00 0.96
Y*(8,L)C*B12 FC/MC/PC43B 1.01 1.02 0.94
(Y*9C/T*9V)*B12 FC/MC/PC43B 1.01 1.01 0.96
Y*(8,L)C*C16 FC/MC/PC43C 1.01 1.02 0.92
Y*(8,L)C*C20 FC/MC/PC43C 1.01 1.02 0.92
(Y*9C/T*9V)*C16 FC/MC/PC43C 1.01 1.02 0.94
(Y*9C/T*9V)*C20 FC/MC/PC43C 1.01 1.02 0.93
Y*(8,L)C*C16 FC/MC/PC48C 1.01 1.03 0.92
Y*(8,L)C*C20 FC/MC/PC48C 1.01 1.03 0.92
(Y*9C/T*9V)*C16 FC/MC/PC48C 1.01 1.03 0.93
(Y*9C/T*9V)*C20 FC/MC/PC48C 1.01 1.03 0.92
(Y*9C/T*9V)*D20 FC/MC/PC48D 1.01 1.05 0.93
Y*(8,L)C*B12 HC36 0.99 0.99 0.94
(Y*9C/T*9V)*B12 HC36 1.00 1.01 0.97
Y*(8,L)C*C16 HC42 1.01 1.02 0.92
Y*(8,L)C*C20 HC42 1.01 1.02 0.92
(Y*9C/T*9V)*C16 HC42 1.01 1.02 0.94
(Y*9C/T*9V)*C20 HC42 1.01 1.02 0.93
Y*(8,L)C*A12 HD36 0.98 0.95 0.95
Y*(8,L)C*B12 HD36 0.99 0.96 0.93
Y*(8,L)C*C16 HD36 0.99 0.96 0.92
Y*(8,L)C*C20 HD36 1.00 0.99 0.92
(Y*9C/T*9V)*B12 HD36 0.99 0.96 0.94
(Y*9C/T*9V)*C16 HD36 0.99 0.96 0.92
(Y*9C/T*9V)*C20 HD36 0.99 0.96 0.93
Y*(8,L)C*A12 UC30A 0.99 1.01 0.97
Y*(8,L)C*B12 UC30B 0.98 0.97 0.92
Furnaces Coils T.C. S.C. KW
413437-YTG-E-0909
Johnson Controls Unitary Products 21
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Continued on next page.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. YCJF36S41S1
INDOOR COIL MODEL NO. FC/MC/PC43
CONDENSING
ENTERING AIR
TEMPERATURE
IDCFM 1000 1200 1400
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65
T.C. 32.5 34.9 34.7 37.5 40.6 34.2 35.8 35.7 38.4 41.8 35.8 36.8 36.7 39.3 43.0
S.C. 25.5 25.5 24.9 24.8 20.9 25.5 25.5 25.2 25.2 21.7 25.5 25.5 25.5 25.5 22.4
KW 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
75
T.C. 31.6 33.6 33.4 36.3 39.1 33.2 34.5 34.3 37.1 40.2 34.8 35.3 35.3 38.0 41.3
S.C. 25.5 25.5 24.2 24.2 20.2 25.5 25.5 24.9 24.9 21.0 25.5 25.5 25.5 25.5 21.8
KW 1.8 1.9 1.9 1.9 1.9 1.8 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
85
T.C. 30.7 32.3 32.1 35.0 37.7 32.2 33.1 33.0 35.9 38.7 33.7 33.9 33.8 36.7 39.6
S.C. 25.5 25.5 23.6 23.6 19.4 25.5 25.5 24.6 24.6 20.3 25.5 25.5 25.5 25.5 21.3
KW 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1
95
T.C. 29.7 31.0 30.8 33.7 36.2 31.2 31.7 31.6 34.6 37.1 32.6 32.5 32.4 35.4 37.9
S.C. 25.5 25.5 22.9 23.0 18.7 25.5 25.5 24.2 24.3 19.7 25.5 25.5 25.5 25.5 20.7
KW 2.3 2.3 2.3 2.4 2.4 2.3 2.3 2.4 2.4 2.4 2.3 2.3 2.4 2.4 2.4
105
T.C. 28.3 29.3 29.0 31.9 34.2 29.7 30.0 29.7 32.7 35.0 31.0 30.7 30.4 33.4 35.8
S.C. 25.5 25.2 22.0 22.1 17.9 25.5 25.4 23.3 23.4 18.7 25.5 25.5 24.7 24.7 19.6
KW 2.7 2.7 2.8 2.8 2.8 2.7 2.7 2.8 2.8 2.8 2.7 2.7 2.8 2.8 2.8
115
T.C. 26.9 27.7 27.3 30.1 32.1 28.2 28.3 27.9 30.8 32.9 29.4 29.0 28.5 31.4 33.6
S.C. 25.5 24.9 21.1 21.3 17.1 25.5 25.2 22.4 22.6 17.8 25.5 25.5 23.8 23.9 18.5
KW 3.1 3.1 3.2 3.1 3.3 3.1 3.1 3.2 3.1 3.3 3.1 3.1 3.3 3.1 3.3
125
T.C. 25.5 26.0 25.5 28.3 30.1 26.7 26.6 26.0 28.9 30.8 27.8 27.2 26.5 29.5 31.4
S.C. 25.5 24.5 20.1 20.4 16.2 25.5 25.0 21.5 21.7 16.8 25.5 25.5 22.9 23.1 17.4
KW 3.5 3.5 3.6 3.5 3.8 3.5 3.5 3.7 3.5 3.8 3.5 3.4 3.8 3.5 3.7
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Air Handlers Coils T.C. S.C. KW
– FC/MC/PC35 0.98 0.98 1.00
– FC/MC/PC36 0.97 0.96 1.00
– FC/MC/PC37 1.00 1.00 1.00
– FC/MC/PC48 1.01 1.01 1.00
– FC/MC/PC60 1.01 1.02 1.00
– FC/MC62 1.01 1.02 1.00
– HC36 0.98 0.98 1.00
– HC42 1.00 1.00 1.00
– HD48 1.00 1.00 1.00
– UC60 0.96 0.95 1.00
AHP36 – 1.00 1.01 0.97
AV36 – 1.03 1.05 0.94
AV/SV48 – 0.98 0.98 0.93
AHX36 – 1.02 1.03 0.92
AHX42 – 1.03 1.04 0.91
AHX48 – 1.04 1.07 0.92
AHX60 – 1.05 1.08 0.93
F6FP036 – 0.99 0.98 0.95
F6FP042 – 1.04 1.07 0.94
F6FP048 – 0.97 0.96 0.91
F6FP060 – 1.04 1.06 0.93
F4FP036 – 0.97 0.97 1.00
F4FP040 – 0.97 0.96 1.00
F4FP042 – 0.97 0.96 1.00
F4FV060 – 0.98 0.98 0.92
F5FP048 – 1.03 1.05 0.93
F5FP060 – 0.99 1.00 0.93
MA12B FC/MC35B 0.98 0.98 1.00
MV12B FC/MC35B 0.99 0.99 0.95
MV16C FC/MC35C 1.00 1.00 0.93
MA12B FC/MC36B 0.97 0.96 1.00
MV12B FC/MC36B 0.99 0.98 0.95
MV16C FC/MC36C 0.99 0.98 0.93
MA12B FC/MC43B 1.00 1.00 1.00
MV12B FC/MC43B 1.01 1.01 0.95
MV16C FC/MC43C 1.02 1.02 0.93
MA14D FC/MC48D 1.01 1.01 1.00
MV12D FC/MC48D 1.02 1.01 0.93
MV16C FC/MC48C 1.03 1.03 0.92
MV20D FC/MC48D 1.03 1.03 0.92
MA14D FC/MC60D 1.01 1.02 1.00
MV12D FC/MC60D 1.02 1.02 0.92
MV20D FC/MC60D 1.03 1.04 0.92
MA14D FC/MC62D 1.01 1.02 1.00
MV12D FC/MC62D 1.02 1.02 0.92
MV20D FC/MC62D 1.04 1.04 0.92
Air Handlers Coils T.C. S.C. KW
413437-YTG-E-0909
22 Johnson Controls Unitary Products
Furnaces Coils T.C. S.C. KW
T*(8,L)X*B12 FC/MC/PC35B 1.01 1.03 0.95
T*(8,L)X*C16 FC/MC/PC35C 0.99 0.97 0.91
T*(8,L)X*C20 FC/MC/PC35C 1.00 1.01 0.92
T*9X*B12 FC/MC/PC35B 0.99 1.00 0.95
T*9X*C16 FC/MC/PC35C 1.00 1.00 0.94
T*9X*C20 FC/MC/PC35C 1.00 1.01 0.93
T*(8,L)X*A12 FC/MC/PC36A 0.99 0.97 0.96
T*(8,L)X*B12 FC/MC/PC36B 0.99 1.00 0.95
T*(8,L)X*C16 FC/MC/PC36C 0.98 0.96 0.91
T*(8,L)X*C20 FC/MC/PC36C 1.00 1.02 0.92
T*9X*B12 FC/MC/PC36B 0.99 0.97 0.96
T*9X*C16 FC/MC/PC36C 1.00 1.01 0.94
T*9X*C20 FC/MC/PC36C 0.99 0.98 0.93
T*(8,L)X*A12 FC/MC/PC37A 1.03 1.06 0.95
T*(8,L)X*B12 FC/MC/PC43B 1.03 1.06 0.95
T*(8,L)X*C16 FC/MC/PC43C 1.02 1.03 0.91
T*(8,L)X*C20 FC/MC/PC43C 1.03 1.05 0.92
T*9X*B12 FC/MC/PC43B 1.02 1.05 0.95
T*9X*C16 FC/MC/PC43C 1.03 1.05 0.94
T*9X*C20 FC/MC/PC43C 1.02 1.02 0.93
T*(8,L)X*C16 FC/MC/PC48C 1.04 1.05 0.90
T*(8,L)X*C20 FC/MC/PC48C 1.03 1.05 0.92
T*9X*C16 FC/MC/PC48C 1.04 1.07 0.94
T*9X*C20 FC/MC/PC48C 1.03 1.04 0.93
T*9X*D20 FC/MC/PC48D 1.03 1.05 0.92
T*(8,L)X*C16 FC/PC60C 1.03 1.03 0.90
T*(8,L)X*C20 FC/MC/PC60D 1.03 1.06 0.92
T*9X*C16 FC/PC60C 1.04 1.06 0.94
T*9X*C20 FC/PC60C 1.02 1.03 0.92
T*9X*D20 FC/MC/PC60D 1.04 1.07 0.92
T*9X*D20 FC/MC62D 1.04 1.06 0.92
T*(8,L)X*C16 HD48 1.00 1.01 0.91
T*(8,L)X*C20 HD48 1.02 1.04 0.92
T*9X*C16 HD48 0.98 1.06 0.94
T*9X*C20 HD48 1.02 1.04 0.92
T*9X*D20 HD48 1.02 1.04 0.92
T*(8,L)X*C16 UC48C 0.99 0.99 0.90
T*(8,L)X*C20 UC48C 1.00 1.02 0.92
T*9X*C16 UC48C 0.99 1.01 0.94
T*9X*C20 UC48C 0.98 0.98 0.93
T*9X*D20 UC48D 0.98 0.99 0.92
T*(8,L)X*C16 UC60C 0.99 0.98 0.90
T*9X*D20 UC60D 1.00 1.02 0.92
Y*(8,L)C*B12 FC/MC/PC35B 0.99 0.98 0.98
(Y*9C/T*9V)*B12 FC/MC/PC35B 0.98 0.98 0.97
Y*(8,L)C*C16 FC/MC/PC35C 1.00 1.01 0.95
Y*(8,L)C*C20 FC/MC/PC35C 1.00 1.00 0.93
(Y*9C/T*9V)*C16 FC/MC/PC35C 1.00 1.00 0.95
(Y*9C/T*9V)*C20 FC/MC/PC35C 1.00 1.03 0.98
Y*(8,L)C*A12 FC/MC/PC36A 0.97 0.97 0.98
Y*(8,L)C*B12 FC/MC/PC36B 0.98 0.97 0.96
(Y*9C/T*9V)*B12 FC/MC/PC36B 0.98 0.97 0.96
Y*(8,L)C*C16 FC/MC/PC36C 0.99 1.00 0.94
Y*(8,L)C*C20 FC/MC/PC36C 0.99 1.00 0.94
(Y*9C/T*9V)*C16 FC/MC/PC36C 0.99 1.00 0.94
(Y*9C/T*9V)*C20 FC/MC/PC36C 1.00 1.02 0.97
Y*(8,L)C*A12 FC/MC/PC37A 0.98 0.93 0.94
Y*(8,L)C*B12 FC/MC/PC43B 1.01 1.01 0.98
(Y*9C/T*9V)*B12 FC/MC/PC43B 1.01 1.01 0.98
Y*(8,L)C*C16 FC/MC/PC43C 1.02 1.02 0.94
Y*(8,L)C*C20 FC/MC/PC43C 1.02 1.02 0.93
(Y*9C/T*9V)*C16 FC/MC/PC43C 1.01 1.02 0.96
(Y*9C/T*9V)*C20 FC/MC/PC43C 1.02 1.02 0.94
Y*(8,L)C*C16 FC/MC/PC48C 1.03 1.05 0.93
Y*(8,L)C*C20 FC/MC/PC48C 1.04 1.05 0.92
(Y*9C/T*9V)*C16 FC/MC/PC48C 1.03 1.04 0.94
(Y*9C/T*9V)*C20 FC/MC/PC48C 1.04 1.08 0.97
(Y*9C/T*9V)*D20 FC/MC/PC60D 1.02 1.04 0.94
(Y*9C/T*9V)*D20 FC/MC62D 1.04 1.06 0.94
Y*(8,L)C*C16 FC/PC60C 1.03 1.04 0.92
Y*(8,L)C*C20 FC/PC60C 1.03 1.04 0.93
(Y*9C/T*9V)*C16 FC/PC60C 1.02 1.03 0.96
(Y*9C/T*9V)*C20 FC/PC60C 1.04 1.08 0.96
Y*(8,L)C*C16 HC42 1.02 1.02 0.94
Y*(8,L)C*C20 HC42 1.02 1.03 0.93
(Y*9C/T*9V)*C16 HC42 1.01 1.02 0.96
(Y*9C/T*9V)*C20 HC42 1.02 1.02 0.94
Y*(8,L)C*B12 HD48 1.01 1.02 0.96
Y*(8,L)C*C16 HD48 1.02 1.03 0.93
Y*(8,L)C*C20 HD48 1.02 1.03 0.92
(Y*9C/T*9V)*B12 HD48 1.01 1.02 0.97
(Y*9C/T*9V)*C16 HD48 1.02 1.03 0.94
(Y*9C/T*9V)*C20 HD48 1.03 1.05 0.97
Y*(8,L)C*C16 UC60C 0.99 0.98 0.92
Y*(8,L)C*C20 UC60C 0.99 0.98 0.93
(Y*9C/T*9V)*C16 UC60C 0.98 0.97 0.96
(Y*9C/T*9V)*C20 UC60C 1.00 1.02 0.96
(Y*9C/T*9V)*D20 UC60D 0.99 0.98 0.94
Furnaces Coils T.C. S.C. KW
413437-YTG-E-0909
Johnson Controls Unitary Products 23
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Continued on next page.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. YCJF42S41S1
INDOOR COIL MODEL NO. FC/MC/PC48
CONDENSING
ENTERING AIR
TEMPERATURE
IDCFM 1200 1400 1600
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65
T.C. 40.7 42.7 42.3 45.8 48.7 42.2 43.5 43.1 46.7 49.6 43.8 44.3 43.9 47.5 50.5
S.C. 39.9 36.7 30.9 30.4 23.9 41.5 39.4 33.0 32.5 25.0 43.2 42.0 35.1 34.7 26.1
KW 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
75
T.C. 39.3 40.8 40.7 43.9 47.3 40.8 41.7 41.4 44.8 48.0 42.3 42.5 42.2 45.7 48.8
S.C. 38.4 35.6 30.1 29.6 23.2 40.0 38.3 32.2 31.8 24.4 41.7 40.9 34.4 34.1 25.6
KW 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
85
T.C. 37.9 38.9 39.1 42.1 45.9 39.3 39.9 39.8 42.9 46.5 40.8 40.8 40.5 43.8 47.0
S.C. 36.8 34.6 29.2 28.9 22.6 38.5 37.2 31.4 31.2 23.9 40.2 39.8 33.7 33.4 25.2
KW 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
95
T.C. 36.5 37.0 37.5 40.3 44.5 37.9 38.0 38.2 41.1 44.9 39.3 39.1 38.8 41.9 45.3
S.C. 35.3 33.5 28.3 28.1 21.9 37.0 36.1 30.6 30.5 23.3 38.7 38.7 33.0 32.8 24.7
KW 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8
105
T.C. 34.7 34.9 35.1 37.8 41.8 36.0 36.0 35.8 38.6 42.2 37.2 37.1 36.4 39.4 42.7
S.C. 33.4 32.4 27.3 27.2 21.1 35.0 34.7 29.6 29.5 22.5 36.6 36.9 31.8 31.8 23.8
KW 3.3 3.3 3.3 3.3 3.2 3.3 3.3 3.3 3.3 3.2 3.3 3.3 3.3 3.3 3.2
115
T.C. 32.9 32.9 32.9 35.4 39.2 34.1 34.0 33.5 36.1 39.7 35.3 35.1 34.1 36.9 40.1
S.C. 31.7 31.3 26.4 26.3 20.3 33.1 33.2 28.5 28.6 21.7 34.6 35.2 30.6 30.8 23.0
KW 3.8 3.8 3.8 3.7 3.7 3.8 3.8 3.8 3.7 3.7 3.7 3.7 3.8 3.7 3.7
125
T.C. 31.1 30.8 30.6 33.0 36.6 32.2 32.0 31.2 33.7 37.1 33.3 33.1 31.8 34.4 37.6
S.C. 29.9 30.2 25.5 25.4 19.5 31.3 31.8 27.5 27.7 20.8 32.6 33.4 29.5 29.9 22.1
KW 4.3 4.3 4.3 4.2 4.1 4.3 4.2 4.3 4.1 4.1 4.2 4.2 4.3 4.1 4.1
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Air Handlers Coils T.C. S.C. KW
– FC/MC/PC42 0.94 0.93 1.00
– FC/MC/PC43 0.99 0.99 1.00
– FC/MC/PC60 1.00 1.00 1.00
– FC/MC62 1.00 1.00 1.00
– FC64D 1.02 0.99 0.97
– HC42 0.99 0.99 1.00
– HD48 1.00 0.98 1.00
– HD60 1.01 1.01 1.00
AV/SV48 – 0.97 0.95 0.94
AV/SV60 – 0.97 0.95 0.94
AHX42 – 1.02 1.03 0.92
AHX48 – 1.02 1.04 0.93
AHX60 – 1.03 1.04 0.93
F6FP042 – 1.02 1.04 0.95
F6FP048 – 0.96 0.96 0.93
F6FP060 – 1.03 1.05 0.95
F4FV060 – 0.97 0.96 0.93
F5FP048 – 1.02 1.04 0.95
F5FP060 – 0.97 0.97 0.95
MA16C FC/MC43C 0.99 0.99 1.00
MV16C FC/MC43C 1.00 1.00 0.95
MA14D FC/MC48D 1.00 1.00 1.00
MA16C FC/MC48C 1.00 1.00 1.00
MV16C FC/MC48C 1.02 1.02 0.95
MV20D FC/MC48D 1.02 1.02 0.94
MA14D FC/MC60D 1.00 1.00 1.00
MA16C FC/MC60C 1.00 1.00 1.00
MV20D FC/MC60D 1.01 1.02 0.93
MA14D FC/MC62D 1.00 1.00 1.00
MV20D FC/MC62D 1.02 1.02 0.93
MV12D FC64D 1.02 0.99 0.97
MV20D FC64D 1.02 1.02 0.90
Air Handlers Coils T.C. S.C. KW
413437-YTG-E-0909
24 Johnson Controls Unitary Products
Furnaces Coils T.C. S.C. KW
T*(8,L)X*B12 FC/MC/PC43B 0.99 0.98 0.94
T*(8,L)X*C16 FC/MC/PC43C 1.02 1.03 0.95
T*(8,L)X*C20 FC/MC/PC43C 1.01 1.02 0.94
T*9X*B12 FC/MC/PC43B 0.97 0.94 0.94
T*9X*C16 FC/MC/PC43C 1.01 1.01 0.95
T*9X*C20 FC/MC/PC43C 1.01 1.01 0.94
T*(8,L)X*C16 FC/MC/PC48C 1.02 1.02 0.92
T*(8,L)X*C20 FC/MC/PC48C 1.02 1.03 0.93
T*9X*C16 FC/MC/PC48C 1.02 1.03 0.95
T*9X*C20 FC/MC/PC48C 1.02 1.03 0.94
T*9X*D20 FC/MC/PC48D 1.02 1.03 0.93
T*(8,L)X*C16 FC/PC60C 1.01 1.02 0.92
T*(8,L)X*C20 FC/MC/PC60D 1.01 1.02 0.93
T*9X*C16 FC/PC60C 1.00 1.01 0.95
T*9X*C20 FC/PC60C 1.01 1.02 0.94
T*9X*D20 FC/MC/PC60D 1.02 1.05 0.93
T*9X*D20 FC/MC62D 1.03 1.05 0.93
T*(8,L)X*C16 FC64D 1.02 1.03 0.97
T*(8,L)X*C20 FC64D 1.02 1.06 0.97
T*9X*C16 FC64D 1.02 1.03 0.97
T*9X*C20 FC64D 1.02 1.03 0.97
T*9X*D20 FC64D 1.02 0.99 0.97
T*(8,L)X*C16 HD48 1.01 1.01 0.92
T*(8,L)X*C20 HD48 1.03 1.05 0.93
T*9X*C16 HD48 1.02 1.03 0.95
T*9X*C20 HD48 1.02 1.03 0.93
T*9X*D20 HD48 1.16 0.89 0.93
T*(8,L)X*C16 UC48C 0.97 0.97 0.92
T*(8,L)X*C20 UC48C 0.98 1.00 0.93
T*9X*C16 UC48C 0.96 0.96 0.95
T*9X*C20 UC48C 0.97 0.96 0.94
T*9X*D20 UC48D 0.97 0.96 0.93
Y*(8,L)C*C16 FC/MC/PC43C 1.01 1.00 0.96
Y*(8,L)C*C20 FC/MC/PC43C 1.01 1.00 0.96
(Y*9C/T*9V)*C16 FC/MC/PC43C 1.01 1.00 0.97
(Y*9C/T*9V)*C20 FC/MC/PC43C 1.01 1.00 0.97
Y*(8,L)C*C16 FC/MC/PC48C 1.02 1.02 0.96
Y*(8,L)C*C20 FC/MC/PC48C 1.02 1.02 0.95
(Y*9C/T*9V)*C16 FC/MC/PC48C 1.02 1.02 0.97
(Y*9C/T*9V)*C20 FC/MC/PC48C 1.02 1.02 0.97
(Y*9C/T*9V)*D20 FC/MC/PC48D 1.02 1.02 0.96
(Y*9C/T*9V)*D20 FC/MC/PC60D 1.02 1.02 0.96
(Y*9C/T*9V)*D20 FC/MC62D 1.02 1.03 0.96
Y*(8,L)C*C16 FC/PC60C 1.02 1.02 0.95
Y*(8,L)C*C20 FC/PC60C 1.02 1.02 0.94
(Y*9C/T*9V)*C16 FC/PC60C 1.01 1.01 0.99
(Y*9C/T*9V)*C20 FC/PC60C 1.02 1.01 0.97
Y*(8,L)C*C16 FC64D 1.02 1.03 0.97
Y*(8,L)C*C20 FC64D 1.02 1.03 0.97
(Y*9C/T*9V)*C16 FC64D 1.02 1.03 1.00
(Y*9C/T*9V)*C20 FC64D 1.02 1.03 0.97
(Y*9C/T*9V)*D20 FC64D 1.02 0.99 0.97
(Y*9C/T*9V)*D20 FC64D 1.02 0.99 0.91
Y*(8,L)C*C16 HC42 1.01 1.00 0.96
Y*(8,L)C*C20 HC42 1.01 1.00 0.96
(Y*9C/T*9V)*C16 HC42 1.01 1.00 0.97
(Y*9C/T*9V)*C20 HC42 1.01 1.00 0.97
Y*(8,L)C*B12 HD48 1.00 0.97 0.98
Y*(8,L)C*C16 HD48 1.02 1.00 0.96
Y*(8,L)C*C20 HD48 1.02 1.01 0.95
(Y*9C/T*9V)*B12 HD48 0.97 0.91 0.94
(Y*9C/T*9V)*C16 HD48 1.01 1.00 0.97
(Y*9C/T*9V)*C20 HD48 1.01 1.00 0.97
(Y*9C/T*9V)*D20 HD48 1.02 1.00 0.96
Y*(8,L)C*C16 HD60 1.02 1.02 0.95
Y*(8,L)C*C20 HD60 1.02 1.02 0.94
(Y*9C/T*9V)*C16 HD60 1.02 1.02 0.99
(Y*9C/T*9V)*C20 HD60 1.02 1.02 0.97
(Y*9C/T*9V)*D20 HD60 1.02 1.02 0.96
Y*(8,L)C*C16 UC48C 0.98 1.00 0.96
Y*(8,L)C*C20 UC48C 0.98 1.01 0.95
(Y*9C/T*9V)*C16 UC48C 0.98 1.00 0.97
(Y*9C/T*9V)*C20 UC48C 0.98 1.00 0.97
(Y*9C/T*9V)*D20 UC48D 0.98 1.00 0.96
Y*(8,L)C*C16 UC60C 0.99 0.97 0.95
Y*(8,L)C*C20 UC60C 0.99 0.97 0.94
(Y*9C/T*9V)*C16 UC60C 0.98 0.96 0.98
(Y*9C/T*9V)*C20 UC60C 0.98 0.97 0.97
(Y*9C/T*9V)*D20 UC60D 0.99 0.97 0.96
Furnaces Coils T.C. S.C. KW
413437-YTG-E-0909
Johnson Controls Unitary Products 25
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Continued on next page.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. YCJF48S41S1
INDOOR COIL MODEL NO. FC/MC/PC60
CONDENSING
ENTERING AIR
TEMPERATURE
IDCFM 1400 1600 1800
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65
T.C. 44.1 45.2 43.0 47.2 47.3 44.2 45.3 43.9 47.4 47.9 44.2 45.3 44.8 47.6 48.5
S.C. 43.7 39.0 33.0 31.2 24.2 44.3 40.6 34.5 32.2 24.8 44.9 42.3 36.0 33.2 25.5
KW 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.3 2.2 2.2 2.2 2.2 2.3
75
T.C. 42.6 43.5 41.7 45.7 46.9 43.0 43.8 42.5 46.1 47.5 43.5 44.1 43.2 46.5 48.2
S.C. 42.4 39.0 33.0 31.3 24.3 43.3 40.8 34.6 32.6 25.0 44.1 42.6 36.3 33.9 25.7
KW 2.5 2.5 2.5 2.5 2.6 2.5 2.5 2.5 2.5 2.6 2.5 2.5 2.5 2.5 2.6
85
T.C. 41.0 41.9 40.4 44.1 46.5 41.9 42.4 41.0 44.8 47.2 42.7 42.9 41.6 45.4 47.9
S.C. 41.1 38.9 32.9 31.4 24.3 42.2 40.9 34.7 33.0 25.2 43.4 42.9 36.6 34.6 26.0
KW 2.8 2.8 2.8 2.9 2.9 2.8 2.8 2.8 2.9 2.9 2.8 2.8 2.8 2.9 2.9
95
T.C. 39.5 40.2 39.1 42.6 46.0 40.7 41.0 39.5 43.5 46.8 42.0 41.8 40.0 44.3 47.6
S.C. 39.8 38.9 32.8 31.5 24.4 41.2 41.1 34.8 33.4 25.3 42.6 43.2 36.9 35.2 26.3
KW 3.1 3.2 3.1 3.2 3.2 3.1 3.2 3.1 3.2 3.2 3.1 3.2 3.1 3.2 3.2
105
T.C. 37.1 37.6 36.0 39.8 43.4 38.3 38.6 36.6 40.6 44.1 39.5 39.6 37.2 41.4 44.8
S.C. 37.3 36.8 31.4 30.5 23.5 38.6 38.7 33.5 32.5 24.6 40.0 40.5 35.5 34.4 25.7
KW 3.6 3.6 3.6 3.6 3.7 3.6 3.6 3.6 3.6 3.7 3.6 3.6 3.6 3.6 3.7
115
T.C. 34.9 35.0 33.0 37.1 40.8 36.0 36.3 33.7 37.8 41.5 37.1 37.5 34.4 38.5 42.1
S.C. 34.8 34.8 30.0 29.5 22.7 36.2 36.4 32.1 31.6 24.0 37.5 37.9 34.2 33.6 25.2
KW 4.0 4.0 4.0 4.0 4.1 4.0 4.0 4.0 4.0 4.1 4.0 4.0 4.0 4.1 4.1
125
T.C. 32.6 32.5 30.1 34.4 38.2 33.6 33.9 30.8 35.0 38.8 34.6 35.4 31.6 35.7 39.5
S.C. 32.4 32.9 28.7 28.4 21.9 33.7 34.1 30.8 30.6 23.3 34.9 35.3 32.9 32.9 24.6
KW 4.4 4.4 4.4 4.5 4.6 4.4 4.4 4.4 4.5 4.6 4.5 4.5 4.4 4.5 4.6
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Air Handlers Coils T.C. S.C. KW
– FC/MC/PC48 1.00 1.00 1.00
– FC/MC62 1.01 1.00 1.00
– HD48 1.00 1.00 1.00
– HD60 1.02 1.02 1.00
AHP/SHP60 – 0.95 0.94 0.97
AHX48 – 1.02 1.04 0.95
AHX60 – 1.03 1.04 0.97
F6FP048 – 0.95 0.94 0.96
F6FP060 – 1.03 1.05 0.97
AV/SV48 – 0.95 0.94 0.96
AV/SV60 – 0.95 0.94 0.96
F4FV060 – 0.95 0.94 0.96
F5FP048 – 1.01 1.04 0.97
F5FP060 – 0.95 0.95 0.98
MA16C FC/MC48C 1.00 1.00 1.00
MA20D FC/MC48D 1.00 1.00 1.00
MV16C FC/MC48C 1.01 1.01 0.96
MV20D FC/MC48D 1.01 1.01 0.96
MA16C FC/MC60C 1.00 1.00 1.00
MA20D FC/MC60D 1.00 1.00 1.00
MV20D FC/MC60D 1.01 1.01 0.96
MA20D FC/MC62D 1.01 1.00 1.00
MV20D FC/MC62D 1.02 1.01 0.96
MV20D FC64D 1.03 1.01 0.98
Air Handlers Coils T.C. S.C. KW
413437-YTG-E-0909
26 Johnson Controls Unitary Products
Furnaces Coils T.C. S.C. KW
T*(8,L)X*C16 FC/MC/PC48C 1.01 1.02 0.96
T*(8,L)X*C20 FC/MC/PC48C 1.01 1.02 0.95
T*9X*C16 FC/MC/PC48C 1.01 1.02 0.96
T*9X*C20 FC/MC/PC48C 1.01 1.02 0.95
T*9X*D20 FC/MC/PC48D 1.01 1.02 0.96
T*(8,L)X*C16 FC/PC60C 1.00 1.00 0.96
T*(8,L)X*C20 FC/MC/PC60D 1.01 1.01 0.96
T*9X*C16 FC/PC60C 1.00 1.00 0.96
T*9X*C20 FC/PC60C 1.01 1.01 0.95
T*9X*D20 FC/MC/PC60D 1.00 0.99 0.92
T*(8,L)X*C16 FC/MC62D 1.02 1.03 0.96
T*(8,L)X*C20 FC/MC62D 1.02 1.03 0.95
T*(8,L)X*C16 FC64D 1.03 1.01 0.98
T*(8,L)X*C20 FC64D 1.03 1.04 1.00
T*9X*C16 FC64D 1.02 1.01 1.01
T*9X*C20 FC64D 1.03 1.01 1.00
T*9X*D20 FC64D 1.03 1.01 0.98
T*(8,L)X*C16 HD48 1.03 1.01 0.96
T*(8,L)X*C20 HD48 1.03 1.02 0.95
T*9X*C16 HD48 1.03 1.01 0.96
T*9X*C20 HD48 1.03 1.02 0.95
T*9X*D20 HD48 1.03 1.01 0.96
T*(8,L)X*C16 HD60 0.97 1.03 0.96
T*(8,L)X*C20 HD60 0.97 1.03 0.95
T*9X*C16 HD60 0.97 1.03 0.96
T*9X*C20 HD60 0.97 1.03 0.96
T*9X*D20 HD60 0.97 1.03 0.96
T*(8,L)X*C16 UC48C 0.95 0.94 0.96
T*(8,L)X*C20 UC48C 0.95 0.94 0.92
T*9X*C16 UC48C 0.95 0.94 0.96
T*9X*C20 UC48C 0.95 0.94 0.95
T*9X*D20 UC48D 0.95 0.94 0.96
T*(8,L)X*C16 UC60C 0.95 0.95 0.96
T*(8,L)X*C20 UC60D 0.96 0.95 0.92
T*9X*C16 FC/PC60C 0.95 0.94 0.96
T*9X*D20 UC60D 0.95 0.93 0.92
Y*(8,L)C*C16 FC/MC/PC48C 1.01 1.02 0.98
Y*(8,L)C*C20 FC/MC/PC48C 1.01 1.02 0.99
(Y*9C/T*9V)*C16 FC/MC/PC48C 1.01 1.01 0.99
(Y*9C/T*9V)*C20 FC/MC/PC48C 1.01 1.01 0.99
(Y*9C/T*9V)*D20 FC/MC/PC48D 1.00 1.01 0.99
Y*(8,L)C*C16 FC/PC60C 1.01 1.02 0.98
Y*(8,L)C*C20 FC/PC60C 1.01 1.02 0.96
(Y*9C/T*9V)*C16 FC/PC60C 1.01 1.01 0.99
(Y*9C/T*9V)*C20 FC/PC60C 1.01 1.01 0.99
(Y*9C/T*9V)*D20 FC/MC/PC60D 1.01 1.01 0.98
Y*(8,L)C*C20 FC/MC62D 1.02 1.03 0.96
(Y*9C/T*9V)*C20 FC/MC62D 1.01 1.02 0.99
(Y*9C/T*9V)*D20 FC/MC62D 1.01 1.03 0.98
Y*(8,L)C*C16 FC64D 1.02 1.01 1.01
Y*(8,L)C*C20 FC64D 1.02 1.01 0.97
(Y*9C/T*9V)*C16 FC64D 1.01 1.00 1.00
(Y*9C/T*9V)*C20 FC64D 1.02 1.00 0.99
(Y*9C/T*9V)*D20 FC64D 1.02 1.01 0.98
(Y*9C/T*9V)*D20 HC60 0.97 1.00 0.98
Y*(8,L)C*C16 HD48 1.00 1.00 0.98
Y*(8,L)C*C20 HD48 1.00 1.00 0.99
(Y*9C/T*9V)*C16 HD48 1.00 0.99 0.99
(Y*9C/T*9V)*C20 HD48 1.00 0.99 0.99
(Y*9C/T*9V)*D20 HD48 1.00 1.00 0.99
Y*(8,L)C*C16 HD60 1.01 1.03 0.98
Y*(8,L)C*C20 HD60 1.01 1.03 0.96
(Y*9C/T*9V)*C16 HD60 1.01 1.03 0.99
(Y*9C/T*9V)*C20 HD60 1.01 1.03 0.99
(Y*9C/T*9V)*D20 HD60 1.01 1.03 0.98
Furnaces Coils T.C. S.C. KW
413437-YTG-E-0909
Johnson Controls Unitary Products 27
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO. YCJF60S41S1
INDOOR COIL MODEL NO. FC/MC/PC62
CONDENSING
ENTERING AIR
TEMPERATURE
IDCFM 1600 1800 2000
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65
T.C. 54.5 57.8 56.7 62.8 68.7 55.3 59.1 58.5 64.7 69.7 56.1 60.4 60.2 66.6 70.7
S.C. 54.0 49.2 40.9 40.7 32.5 56.2 52.4 43.1 42.9 34.1 58.5 55.7 45.3 45.1 35.8
KW 2.7 2.7 2.6 2.7 2.6 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7
75
T.C. 52.7 55.6 54.4 60.5 66.0 54.8 56.8 56.1 62.1 66.9 56.9 58.0 57.7 63.7 67.9
S.C. 52.3 48.1 39.9 39.8 31.5 54.3 51.1 42.2 41.9 33.1 56.4 54.2 44.4 44.1 34.7
KW 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1
85
T.C. 50.8 53.5 52.2 58.1 63.3 54.3 54.5 53.7 59.5 64.2 57.7 55.6 55.2 60.8 65.1
S.C. 50.6 47.1 38.9 38.9 30.5 52.4 49.9 41.2 41.0 32.1 54.3 52.7 43.6 43.0 33.6
KW 3.5 3.6 3.5 3.5 3.5 3.5 3.6 3.5 3.5 3.5 3.5 3.6 3.5 3.5 3.5
95
T.C. 49.0 51.4 50.0 55.8 60.5 53.7 52.3 51.3 56.8 61.4 58.4 53.2 52.6 57.9 62.3
S.C. 48.9 46.0 37.9 38.1 29.5 50.5 48.6 40.3 40.0 31.0 52.2 51.2 42.7 41.9 32.6
KW 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
105
T.C. 46.4 48.2 46.9 52.5 57.0 50.0 49.3 48.1 53.3 58.0 53.7 50.4 49.3 54.2 59.0
S.C. 46.5 44.6 36.7 36.5 28.1 48.0 47.0 39.0 38.5 29.6 49.5 49.3 41.2 40.5 31.1
KW 4.8 4.8 4.8 4.7 4.7 4.8 4.8 4.8 4.7 4.7 4.7 4.8 4.8 4.7 4.7
115
T.C. 43.8 45.2 43.9 49.3 53.6 46.5 46.4 45.0 50.0 54.7 49.1 47.6 46.1 50.7 55.9
S.C. 44.1 43.3 35.5 35.0 26.8 45.5 45.4 37.6 37.1 28.3 46.9 47.5 39.8 39.2 29.7
KW 5.6 5.6 5.7 5.4 5.4 5.5 5.5 5.6 5.4 5.3 5.5 5.5 5.5 5.4 5.3
125
T.C. 41.3 42.2 40.8 46.0 50.2 42.9 43.5 41.9 46.6 51.5 44.5 44.9 42.9 47.2 52.7
S.C. 41.8 41.9 34.3 33.5 25.5 43.1 43.8 36.3 35.7 26.9 44.4 45.6 38.3 37.8 28.3
KW 6.4 6.4 6.5 6.1 6.0 6.3 6.3 6.4 6.1 6.0 6.2 6.2 6.3 6.1 6.0
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT AT 1250 BTUH/1000 CFM.
Air Handlers Coils T.C. S.C. KW
– FC/MC/PC60 0.96 0.98 1.00
– FC/MC62 1.00 1.00 1.00
– HC60 0.96 0.98 1.00
AV/SV60 – 0.97 0.99 0.97
AHX60 – 1.00 0.97 0.96
F6FP060 – 1.00 0.97 0.92
MV20D FC/MC60D 0.97 0.99 0.98
MA20D FC/MC62D 1.00 1.00 1.00
MV20D FC/MC62D 1.02 1.03 0.98
MV20D FC64D 1.03 1.01 0.96
Furnaces Coils T.C. S.C. KW
T*(8,L)X*C16 FC/PC60C 0.97 0.95 0.95
T*(8,L)X*C20 FC/MC/PC60D 0.97 0.95 0.95
T*9X*C16 FC/PC60C 0.97 0.95 0.95
T*9X*C20 FC/PC60C 0.97 0.95 0.95
T*9X*D20 FC/MC/PC60D 0.97 0.95 0.96
T*(8,L)X*C20 FC/MC62D 0.99 0.97 0.95
T*(8,L)X*C16 FC64D 1.02 1.00 1.00
T*(8,L)X*C20 FC64D 1.03 1.03 0.99
T*9X*C16 FC64D 1.01 0.99 0.99
T*9X*C20 FC64D 1.02 1.00 0.98
T*9X*D20 FC64D 1.02 1.00 1.00
Y*(8,L)C*C20 FC/MC62D 0.99 0.97 0.95
(Y*9C/T*9V)*C20 FC/MC62D 0.98 0.96 0.98
(Y*9C/T*9V)*D20 FC/MC62D 0.99 0.97 0.97
Y*(8,L)C*C16 FC64D 1.02 1.01 1.00
Y*(8,L)C*C20 FC64D 1.02 1.00 0.98
(Y*9C/T*9V)*C16 FC64D 1.01 0.99 0.99
(Y*9C/T*9V)*C20 FC64D 1.02 1.00 1.02
(Y*9C/T*9V)*D20 FC64D 1.02 1.00 1.02
(Y*9C/T*9V)*D20 HC60 0.94 0.94 0.97
Y*(8,L)C*C20 HD60 0.99 0.98 0.96
(Y*9C/T*9V)*C20 HD60 1.00 0.98 0.98
(Y*9C/T*9V)*D20 HD60 0.97 0.96 0.98
Subject to change without notice. Published in U.S.A. 413437-YTG-E-0909
Copyright © 2009 by Johnson Controls, Inc. All rights reserved. Supersedes: 413437-YTG-D-0509
Johnson Controls Unitary Products
5005 York Drive
Norman, OK 73069
NOTES
