York Yp9C C Users Manual 538510 UTG A 0809
YP9C*C to the manual ca8acd13-3478-4308-bec3-e71e03e5bd7a
2015-02-02
: York Yp9C-C-Users-Manual york-yp9c-c-users-manual-455244 york pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
538513- YTG-A-0809 DESCRIPTION These compact units employ induced combustion, reliable hot surface ignition and high heat transfer aluminized tubular heat exchangers. The units are factory shipped for installation in upflow or horizontal applications and may be converted for downflow applications. TECHNICAL GUIDE UP TO 98% MODULATING (ECM MOTOR) GAS-FIRED RESIDENTIAL MULTI-POSITION GAS FURNACES MODELS: YP9C*C NATURAL GAS 60 - 120 MBH INPUT These furnaces are designed for residential installation in a basement, closet, alcove, attic, recreation room or garage and are also ideal for commercial applications. All units are factory assembled, wired and tested to assure safe dependable and economical installation and operation. These units are Category IV listed and may be vented either through side wall or roof applications using approved plastic combustion air and vent piping. FEATURES • • • • • • • • • • • • EFFICIENCY RATING CERTIFIED • • When paired with a York heat pump Due to continuous product improvement, specifications are subject to change without notice. Visit us on the web at www.york.com for the most up-to-date technical information. Additional rating information can be found at • • • • • • www.ahridirectory.org • WARRANTY Lifetime limited warranty on both heat exchangers to the original purchaser; a 20-year limited warranty from original installation date to subsequent purchaser. 10-year warranty on the heat exchanger in commercial applications. Standard 5-year limited Parts warranty. Extended 10-year limited parts warranty when product is registered online within 90 days of purchase for replacement or closing for new home construction. • • • • Modulating heating operation includes: - Modulating gas valve, inducer and circulating blower - Modulating operation from 100% to 35% input in 100 increments with nearly constant temperature rise. Easily applied in upflow, horizontal left or right, or downflow installation with minimal conversion necessary. Compact, easy to install, ideal height 33" tall cabinet. ECM variable speed drive for cooling SEER enhancement, improved comfort with optional airflow delay profiles, and continuous fan options for IAQ performance. Easy access to controls to connect power/control wiring. Built-in, high level self diagnostics with fault code display. Low unit amp requirement for easy replacement application. All models are convertable to use propane (LP) gas. Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability. 100% shut off main gas valve for extra safety. 24V, 40 VA control transformer and blower relay supplied for add-on cooling. Airflow leakage less than 1% of nominal airflow for ductblaster conditions. Solid removable bottom panel allows easy conversion. Hi-tech tubular aluminized steel primary heat exchanger with stainless steel tube/aluminum fin secondary heat exchanger for outstanding efficiency. No knockouts to deal with, making installation easier. Movable duct connector flanges for application flexibility. Quiet inducer operation, burner, and blower operation. Inducer rotates for easy conversion of venting options. Fully supported blower assembly for easy access and removal of blower. External air filters used for maximum flexibility in meeting customers IAQ needs. Insulated blower compartment for thermal and acoustic performance. 1/4 turn knobs provided for easy independent door removal. Internal condensate trap design (patent pending) provides condensate management options, easy visual operation check, and is self priming to prevent nuisance problems. These models may be connected as part of a communicating control system using a 4-wire connection bus. The York YP9C modulating ECM furnace is part of a “Hybrid Comfort System” when paired with a York Heat Pump. FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE 538513- YTG-A-0809 LEFT SIDE RIGHT SIDE FRONT Combustion Air Inlet Condensate Drain (Downflow) Combustion Air Inlet Gas Pipe Entry 2” Vent Connection Outlet Gas Pipe Entry Electrical Entry Condensate Drain (Downflow) Electrical Entry Condensate Drain 33” Thermostat Wiring 2” Vent Connection Outlet 23” Condensate Drain Thermostat Wiring Optional Return Air Cutout (Either side) 14” 1” 28.5” 30.25” A 1.5” .56” 23.8” 2” Vent Connection Outlet Combustion Air Inlet B .56” 3” .56” B C 24.25” 20” RETURN END SUPPLY END Cabinet and Duct Dimensions Models Nominal CFM Cabinet Size YP9C060B12MP12C YP9C080B12MP12C YP9C080C16MP12C YP9C100C16MP12C YP9C100C20MP12C YP9C120D20MP12C 1200 1200 1600 1600 2000 2000 B B C C C D Cabinet Dimensions (Inches) A 17 1/2 17 1/2 21 21 21 24 1/2 B 16 3/8 16 3/8 19 7/8 19 7/8 19 7/8 23 3/8 C 13 1/4 14 3/4 16 1/2 18 1/4 18 1/4 21 3/4 Air Temp. Rise Max Input Air Temp. Rise Min Input 7.0 7.5 10.0 10.0 12.0 12.0 °F 40-70 40-70 40-70 40-70 45-75 45-75 °F 20-50 20-50 20-50 20-50 25-55 25-55 Blower Wheel Size Max Over-Current Protect Min. wire Size (awg) @ 75 ft one way Approximate Operating Weights 11 x 8 11 x 8 11 x 10 11 x 10 11 x 11 11 x 11 15 15 15 15 20 20 14 14 14 14 12 12 Ratings & Physical / Electrical Data Models Input Max/Min Output Max/Min AFUE Nominal Airflow YP9C060B12MP12C YP9C080B12MP12C YP9C080C16MP12C YP9C100C16MP12C YP9C100C20MP12C YP9C120D20MP12C MBH 60/21 80/28 80/28 100/35 100/35 120/42 MBH 58/20 77/27 78/27 97/34 97/34 116/40 % 97.5 97.5 97.7 97.7 97.7 98.0 CFM 1200 1200 1600 1600 2000 2000 Models Max. Outlet Air Temp YP9C060B12MP12C YP9C080B12MP12C YP9C080C16MP12C YP9C100C16MP112C YP9C100C20MP12C YP9C120D20MP12C °F 170 175 175 175 180 180 Blower HP 1/2 1/2 3/4 3/4 1 1 Amps 4.8 4.8 7.5 7.5 14.5 14.5 Total Unit Amps Lbs 113 119 134 140 143 152 Annual Fuel Utilization Efficiency (AFUE) numbers are determined in accordance with DOE Test procedures. Wire size and over current protection must comply with the National Electrical Code (NFPA-70-latest edition) and all local codes. The furnace shall be installed so that the electrical components are protected from water. 2 Johnson Controls Unitary Products 538513- YTG-A-0809 FILTER PERFORMANCE Sidewall Vent Termination Kit - The airflow capacity data published in the “Blower Performance” table represents blower performance WITHOUT filters. S1-1HT0901 (3") S1-1HT0902 (2") All applications of these furnaces require the use of field installed air filters. All filter media and mounting hardware or provisions must be field installed external to the furnace cabinet. DO NOT attempt to install any filters inside the furnace. For use on sidewall, two-pipe installations only. Provide a more attractive termination for locations where the terminal is visable on the side of the home. NOTE: Single side return above 1800 CFM is approved as long as the filter velocity does not exceed filter manufacturer’s recommendation and a transition is used to allow use of a 20 x 25 filter. Recommended Filter Sizes CFM Cabinet Size Side (in) Bottom (in) 1200 B 16 x 25 16 x 25 Condensate Neutralizer Kit 1NK0301 Neutralizer cartridge has a 1/2" plastic tube fittings for installation in the drain line. Calcium carbonate refill media is also available from the Source 1 Parts (p/n 026-30228-000). Side Return Filter Racks - 1600 C 16 x 25 20 x 25 1SR0200 - All Models 1SR0402 - All Models 1SF0101 - All Models 2000 C (2) 16 x 25 20 x 25 Bottom Return Filter Racks - 2000 D (2) 16 x 25 22 x 25 1BR0517 or 1BR0617 - For 17-1/2” cabinets 1BR0521 or 1BR0621 - For 21” cabinets 1BR0524 or 1BR0624 - For 24-1/2” cabinets NOTES: 1. Air velocity through throwaway type filters may not exceed 300 feet per minute (91.4 m/min). All velocities over this require the use of high velocity filters. 2. Do not exceed 1800 CFM using a single side return and a 16x25 filter. For CFM greater than 1800, you may use two side returns or one side and the bottom or one return with a transition to allow use of a 20x25 filter. Combustible Floor Base Kit - Unit Clearances to Combustibles Upflow Application Downflow Horizontal 0" Top 1" 0" Vent 0" 0" 0" Rear 0" 0" 0" Side 0" 0" 1" 0" 0" Front 1 1BR05xx series are galvanized steel filter racks. 1BR06xx are pre-painted steel filter racks to match the appearance of the furnace cabinet. 0" 2 Floor Combustible Combustible Closet Yes Yes Yes Line Contact No No Yes Combustible 1. Line contact only permitted between lines formed by the intersection of the rear panel and side panel (top in horizontal position) of the furnace jacket and building joists, studs or framing. 2. For combustible floors only when used with special sub-base. All furnaces approved for alcove and attic installation. ACCESSORIES Propane (LP) Conversion Kit 1NP0681 - All Models This accessory conversion kit may be used to convert natural gas (N) units for propane (LP) operation. Do not use Conversion Kit S1-1NP0680 with these models, as the control/gas valve combination have been updated, and that kit S1-1NP0680 will not function correctly with these models. For installation of these furnaces in downflow applications directly onto combustible flooring material, These kits are required to prevent potential overheating situations. These kits are also required in any applications where the furnace in installed in a downflow configuration without an evaporator coil, where the combustible floor base kit provides access for combustible airflow. 1CB0517 - For 17-1/2” cabinets 1CB0521 - For 21” cabinets 1CB0524 - For 24-1/2” cabinets EAC Transition Kits For installation of EAC accessories with these furnaces to provide easy transition of return airflow through the EAC to get the proper sealing and reduced airflow leakage. 1TK1001 - For all models using side return 1TK1017 - For 17-1/2” cabinets using bottom return 1TK1021 - For 21” cabinets using bottom return 1TK1024 - For 24-1/2” cabinets using bottom return High Altitude - No high altitude kits are required. Thermostats - Compatible thermostat controls are available through accessory sourcing. For optimum performance and installation, refer to the UPGNET “Low Voltage Wiring Diagram” document to select and apply controls. Concentric Vent Termination S1-1CT0302 (2") S1-1CT0303 (3") For use through rooftop, sidewall. Allows combustion air to enter and exhaust to exit through single common hole. Eliminates unslightly elbows for a cleaner installation. Johnson Controls Unitary Products 3 Blower Performance CFM - Any Position High / Low Speed Cooling CFM 060B12*C 080B12*C Jumper Settings Hi Cool Lo Cool Hi Cool Lo Cool COOL Jumper ADJ Jumper 1305 850 1290 840 H B 1100 715 1090 710 MH B 1065 690 1015 660 H A 1000 650 1000 650 MH A 960 625 960 625 H C 760 495 760 495 ML B 900 585 900 585 MH C 660 430 660 430 L B 690 450 680 445 ML A 600 400 600 400 L A 620 400 620 400 ML C 550 400 540 400 L C High / Low Speed Cooling CFM 080C16*C 100C16*C Jumper Settings Hi Cool Lo Cool Hi Cool Lo Cool COOL Jumper ADJ Jumper 1670 1085 1655 1075 H B 1295 840 1275 820 MH B 1385 900 1345 875 H A 1175 765 1160 755 MH A 1245 810 1210 785 H C 995 645 1000 650 ML B 1055 685 1045 680 MH C 935 605 955 620 L B 905 590 910 590 ML A 850 550 870 565 L A 815 530 815 530 ML C 765 500 785 510 L C High / Low Speed Cooling CFM 100C20*C 120D20*C Jumper Settings Hi Cool Lo Cool Hi Cool Lo Cool COOL Jumper ADJ Jumper 2215 1440 2180 1415 H B 1765 1145 1760 1140 MH B 1820 1180 1800 1170 H A 1605 1040 1595 1035 MH A 1635 1060 1620 1050 H C 1270 825 1255 815 ML B 1445 940 1435 935 MH C 1055 685 1050 680 L B 1155 750 1160 755 ML A 960 620 960 615 L A 1040 675 1035 670 ML C 860 560 840 545 L C All CFM’s are shown at 0.5” w.c. external static pressure.These units have variable speed motors that automatically adjust to provide constant CFM from 0.0” to 0.6” w.c. static pressure. From 0.6” to 1.0” static pressure, CFM is reduced by 2% per 0.1” increase in static. Operation on duct systems with greater than 1.0” w.c. external static pressure is not recommended. NOTE: At some settings, LOW COOL airflow may be lower that what is required to operate an airflow switch on certain models of electronic air cleaners. Consult the instructions for the electronic air cleaner for further details. Subject to change without notice. Published in U.S.A. Copyright © 2009 by Johnson Controls, Inc. All rights reserved. Johnson Controls Unitary Products 5005 York Drive Norman, OK 73069 538513- YTG-A-0809 Supersedes: 410821-YTG-C-0409
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : csardom Create Date : 2009:11:02 07:37:57-06:00 Modify Date : 2009:11:02 09:29:45-06:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Title : 538510- UTG-A-0809.fm Creator : csardom Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2009:11:02 09:29:45-06:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:013bb852-ceb2-4d17-9652-595591c8a820 Instance ID : uuid:6b148015-b41e-461c-ba72-3f1ff3fd180c Page Layout : OneColumn Page Mode : UseThumbs Page Count : 4EXIF Metadata provided by EXIF.tools