Yorkville Car Speaker Psa1 Users Manual
PSA1 to the manual 328fac94-326e-441e-beda-3ff813a347be
2015-02-03
: Yorkville Car-Speaker-Psa1-Users-Manual yorkville-car-speaker-psa1-users-manual-474237 yorkville pdf
Open the PDF directly: View PDF 
.
Page Count: 2
Yorkville Sound’s Paraline Series active full range loudspeaker system delivers
the clarity and precision of a complex line array system in a compact, user
friendly format. Innovative cabinet design uses Yorkville Sound’s proven
Paraline high frequency lens technology pioneered in our flagship VTC Elevation
Series line array cabinets.
Two BMS 1.75-inch compression drivers mounted to the patented Paraline
lens delivers a focused 15-degree vertical dispersion and wide 110 degree
horizontal coverage. Four high quality 18 Sound 6-inch woofers provide a
tight and ultra responsive low frequency program.
Rugged injection molded ABS cabinet and Neodymium magnet woofers
minimize overall cabinet weight making a full system transport and set-up
can easily be handled with a single operator. Designed to deliver maximum
performance with minimum complication, the PSA1’s integrated power
amplifiers and internal DSP mean no external processing is required. Direct
connect to mixer source and set system levels, and the system is ready for
the show.
Ideal for mobile PA applications in venues where access to complex trussing
or roof hangs isn’t practical, the Yorkville PSA1 cabinet mounts quickly and
securely on a typical speaker stand. Innovative dual position stand mount
offers two potential cabinet angles for expanded setup options. Up to two
PSA1 cabinets can be stacked safely and securely on a single traditional stand.
Highly efficient amplifier design means each PSA1 draws less than 3 amps in
typical operation meaning up to four cabinets can operate safely on a standard
15 amp service. This allows efficient set up using AC loop thru connections on
the PSA1 while avoiding nuisance tripping of mains breakers. This also
minimizes the need for multiple extension cables or access to multiple house
circuits often needed for an active PA setup.
FEATURES:
• Ultra High Performance Compact Active PA System
• Uses Patented Paraline Horn Lens Technology
(from Yorkville Sound’s Flagship VTC Elevation Series Vertical Array Touring Systems)
• High quality Speaker Components
(including 18 Sound 6-inch Woofers and BMS Compression Drivers)
• Focused 15° Vertical Dispersion for Minimum Interference Between
Arrayed Cabinets
• Wide 110°Horizontal Dispersion Pattern
• Manufactured Using Light-weight/Strong ABS Cabinet Material
• Stacks using Standard Speaker Stand on Integrated Dual Angle
Stand Mount Adaptor (Maximum Two Cabinets per stand)
• Installation Hardware Available
• Up to Four PSA1 Cabinets Can Be Easily Powered
on one 15 Amp Circuit
• Made in Canada
Yorkville
yorkville.com
Compact Expandable Active Vertical Array Loudspeaker System
Series
PSA1
yorkville.com
Yorkville
Compact Expandable Active Vertical Array Loudspeaker System
Series
Specifications:
Type: Active Full Range Cabinet
Program Power: 1200 Watts
Driver Configuration: 4 x 6-Inch Woofers / 2 x 1-inch Paraline Lens
Frequency Response: 75 – 20,000Hz (+/- 3db):
Max SPL: TBD
Crossover Frequency: 1.2kHz
HF Driver(s): 2 x 1-inch exit Compression Drivers w/ 1.5-inch Voice Coil
HF Dispersion: 110 °H x 15°V
HF Power Amplifier: 75 Watts
HF Protection: Peak and Average Limiting
HF Amplifier Type: 2-Tier Class-H
LF Driver(s): 4 x 6-inch Neodymium Woofers w/ 1.75-inch Voice Coil
LF Power Amplifier: 625 Watts
LF Protection: Excursion, RMS
LF Amplifier Type: Class-D
Cooling Scheme: Convection
Power Cable: Removable Locking IEC Input and Loop Thru Output
Power Switch: Yes
Power Consumption (typ/max): 135 VA / 225 VA
Input: 1 x Combi-jack XLR / 1/4-inch Jack
Outputs: 1 x XLR Loop Thru
Input Sensitivity: 1.4 Vrms (sine) at center
0.35 Vrms (sine) at Maximum
Level Controls: Volume
EQ Controls: HF Boost Switch, Mode Switch (Full Range or with Sub)
Limiter: Peak and Average limiting on Horn and Woofer
LED Indicators: Power, Limit, Clip
Enclosure Materials: Injection Molded ABS
Baffle Material: Injection Molded ABS
Covering /Finish: Urethane Paint (Black)
Dimensions (DWH xbackW, inches): 14.5 x 20.5 x 16
Dimensions (DWH xbackW, cm): 6.8 x 52.1 x 40.6
Weight (lbs/kg): 47 / 21.4
PSA1
