Youngshin Electronics JMR5100 Two Way Car Alarm System User Manual

Youngshin Electronics Co., LTD. Two Way Car Alarm System Users Manual

Users Manual

USER’S GUIDE2WAMRYoung Shin Electronics, Inc.www.magicar.comUSER’S GUIDE2WSHR LCDFCC ID : O44JMR5100This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may causeundesired operation. Caution :Changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate this device. IC : 3767B-MR5100Statemen t : The term "IC:" before the radio certification number only signifies that Industry Canadatechnical specifications were met. Caution : he User that modifications to the unit may void the user's authority to operate the unit.
Page 2 Page 31. Safety Information Page 42. Remote-Pager : 2WAMR W/LCD Page 43. Description of Remote Appearance Page 54. GLO Color LCD Page 55. LCD Icons Page 66. Remote-Pager Button Functions Page 77. More Button Functions Page 88. Remote-Pager Learn Routine Page 99. Alarm Mode Page 910. Dual Stage Shock Sensor Page 1011. Auto-Start Function Page 1012. Reservation Mode Page 1113. Canceling Reservation Mode Page 1314. Trunk Release Page 1315. Query Function Page 1316. Panic Mode Page 1317. Valet Mode Page 1418. Timer Start Mode Page 1419. Safety Shut Down Features Page 1420. R.P.S (Remote Paging System) Page 1521. Optional Programmable Features Page 15Ignition Lock Page 15Passive Arming Page 15Turbo Mode Page 1622. Optional installaton Features Page 17Cold Start Mode Page 17Optional Auxiliary 1 & Auxiliary 2 Page 1723. Limited Lifetime Consumer Warranty Page 18Your Warranty Page 19TABLE OF CONTENTS
Page 5Safety InformationRemote-Pager : 2WAMR w/LCDThe model name, 2WAMR stands for Two Way Amplitude Modulated Remote withLiquid Crystal Display.This transmitter allows you to activate multiple functions by pressing different combinations of the 4 buttons on the unit.Please take these safety precautions into consideration under the following conditions: 1. Servicing the vehicleWhen servicing your automobile (i.e. changing the oil, washing your car), the Young Shin Electronics, Inc system should be in Valet Mode. There is a safety shutdown switch underthe hood that deactivates the remote starter function if the hood is open.However, if the switch has been damaged or the switch has been installed improperly,the vehiclemay start when Button IIis pressed for 2 seconds, even if the hood is open. 2. Loaning your vehicle to othersWhenever you loan your vehicle to an individual who is not familiar with Young Shin Electronics,Inc, you may want to put the vehicle in Valet mode. This will prevent the borrower from accidentallyactivating the Young Shin Electronics, Inc auto-security system.3. For manual transmission vehiclesIf the Young Shin Electronics, Inc 2WAMR is installed in a manual transmission vehicle, extra pre-cautions are required because the Young Shin Electronics, Incdoes not monitor the gear shift :Important!Under normal circumstances, Reservation Mode is cancelled when a door or hatchback opens. Please verify that the opening of any door or hatchback cancels Reservation Mode. If any of the doors or hatchback are not monitored by Young Shin Electronics, Inc because of improper installation or a faulty domelight switch, do not use the Young Shin Electronics, Inc and take your vehicle immediately tothe dealer for repair. Do not set Reservation Mode if the window(s) are open or if there is anyone inside the vehicle, this includes animals. Remote start installation in a manual transmission vehicle with a convertible top is not recommended. Page 4GLO color LCDThe remote-pager comes with GLO which is a unique color LCD displaythat visually tells the vehicle owner the security status of your car at all times. There are differing icons that will appear on your GLO LCD indicating what your vehicle is currently doing. Description of Remote AppearanceFront Side RearThe model name, 2WAMR, stands for 2 Way 4 Button Remote.
Page 7Remote-Pager Button Functions12345678910111/2 sec1/2 sec1/2 secIIIIIIVII- I, I-III- IV-(I+II)1/2 sec1/2 sec1/2 sec1/2 sec2 sec2 sec2 secAlarm Mode - on/off, RPS - on/off, Siren Off, Starter Kill (Anti-Grind) -on/offAUX 1 AUX 2 Query FunctionTrunk ReleaseAuto-start Function – on/offPanic, Press Ito shut off Siren. Siren Chirps – on/offValet Mode – on/offPassive Arming – on/offTimer Start Mode – on/offTurbo Mode - on/off Shock Sensor – on/off ButtonPressedFor Function12131415(I+III)(II+III)(II+IV)(III+IV)(I+III)-(I+II)-(I+IV )-1/2 sec1/2 sec2 sec2 sec2 secProgramming Menu 1 - Installer OnlyProgramming Menu 2 - Installer OnlyNote : ""Represents pressing the button for 2 seconds."()"Represents simultaneously pressing the buttons."()"Represents simultaneously pressing the buttons for 2 seconds.Page 6Indicates if Vibrator is on or off.Indicates that Shock sensor is turned on or off.Indicates that your car siren is turned on or off when you lockor unlock the vehicle.Displays if your Hood is open.Displays if your door is open.1. Time Clock. 2. Remainder of the engine running time. Indicates if Timer Mode is on or off.Indicates if Turbo Start Mode is on or off. Indicates if Passive Arming Mode is on or off.Displays remaining battery life.Indicates that your remote-pager is transmitting signals to thecontroller unit.Indicates if you are in Valet Mode.Display if your car is lock or unlcok Indicates that the Shock Sensor has been triggered.Displays if your Trunk is open.Indicates if RPS is on or off.Indicates that someone is paging you from your vehicle.Displays if your vehicle has auto-started properly or ignition on.Icon ExplanationLCD IconsIndicates if your carparking lights are flashing.
Page 8More Button Functions(1) Time SettingTones will sound for confirmationSTEP 1(II+III) - 2 secButtonPressedFor FunctionTime setting is on. The numbers willflash, and tones will sound.STEP 2(I)(II+III)- 1/2 secChange hour.Change minutes.Time setting is off. Tones willsound.STEP 3STEP 4(I)(II)1/2 sec1/2 sec2 sec(2) RPS & Vibration mode on or off Note : Step 2 must be completed within 15 seconds. If not, start over at step 1.Tones will sound for confirmationSTEP 1(II+III) -2 secButtonPressedFor FunctionSTEP 2RPS on or off, tones will sound for confirmation.Vibration mode on or off, tones willsound for confirmation. (III)(IV)1/2 sec1/2 secPage 9Remote-Pager Learn RoutineThe Young Shin Electronics, Inc. system will allow up to three remotes to be programmed to one vehicle. Please perform the following procedure to add orreprogram additional remotes.Alarm ModeYou can arm or disarm alarm mode by pressing Button Ifor a 1/2 second.Press Buttons (I+II)for a 1/2second to make your car siren mute when arming ordisarming your vehicle. Keep in mind that your car siren will still activate for allother modes (i.e. panic or alarm trigger) regardless of whether or not your carsiren is in mute mode. The car siren will be mute only when arming or disarmingyour vehicle. When the alarm is armed, the starter kill function (an optional feature provided byyour installer) is activated. This feature disengages the starter mechanism on your vehicle and prevents it from starting, even with a key.Note :If you lose your remote after you have armed the vehicle, use your keyto open the door. The siren will go off. Turn the ignition on then off, 5 times with your key to shut down the alarm and put the system into valet mode. You can cancel the valet mode with a remote later on. See : Valet mode, on page 10.Note : (Siren duration is 30 to 60 sec depending on the options set at the time of initial installation.)Step1 :Activate Valet/Programming mode by manually turning the ignition on and off five times(between Acc and On)with the key within a 7 second period.The parking light will flash once with successful completion of this step.Step2 :Within a 7 second period after cycling the ignition for the 5th time, press button I. The car parking lights will flash once to confirm that the transmitter has been programmed. You can continue programming additional remotes. The parking lights will flash two timeswhen the programming mode has expired.
Page 10Shows the amount of run-time left in the remote start mode.- Light impact to your vehicle will activate the first stage of the shock sensorand the car siren will chirp 4 times in addition to the parking lights flashing 4 times. The remote-pager unit will be notified audibly and the hammer icon will flash on the LCD- Heavy impact to your vehicle will activate the second stage of the shock sensor and the car siren will sound for 30 to 60 seconds and the parking lights will flash for 30 to 60 seconds. The remote-pager will be notified audibly and a hammer icon will flash ion the LCD. Press Button Ifor a 1/2 second to turn off the the alarm if it has been triggered by the second stage of the shock sensor. Press Buttons(I+III) for 2 seconds to activate or deactivate the dual stage shocksensor. The dual stage shock sensor will activate in 30 seconds after the CompuStaralarm mode is armed. When the dual shock sensor is engaged, the remote-pagerwill be alerted by the following triggers:Press button II for 2 seconds to auto-start an automatic transmission engine.Remember, that a manual key in the ignition is required to drive the car.For manual transmission vehicles, please use reservation mode. Press button IIfor 2 seconds in order to turn off an auto-started car.The engine will run 15 or 25 minutes (25 or 45 min for diesel) depending on presetoptions at the time of installation and then shut off.Auto-Start FunctionDual Stage Shock Sensor Anti-GrindThe anti-grind circuit (an optional feature provided by your installer) prevents you from engaging the starter on a remote-started vehicle.Page 11Diagnosing problems with Auto-Start If there is a problem in auto-starting your vehicle,the Young Shin Electronics,Inc.system will do one of two things; if it fails for any of the reasons listed in the tablebelow, it will flash the parkinglights three times then flash the error number.Otherwise, it will attempt to start the vehicle three times. If, after three times, thevehicle will not start or stay running, the Young Shin Electronics,Inc. system will shutdown. In either case, please see your installer to resolve the situation.1234567Error Number(# of times parking lights flash) Error ReasonEngine OnKey OnDoor OpenTrunk OpenBrake On Hood OpenReservation Off (Manual Transmission Only)Reservation Mode (manual transmission only)In order to auto-start your manual transmission vehicle, you must first set theYoung Shin Electronics, Inc system to Reservation Mode before leaving your vehicle.The purpose of Reservation Mode is to leave the transmission gear in the neutralposition when you leave your vehicle. Reservation mode is intended for use on MANUAL TRANSMISSIONS ONLY and NOT FOR AUTOMATIC TRANSMISSIONS.Reservation Mode must be engaged each and every time you leave your manualtransmission vehicle in order to auto-start it.Note : The system is not recommended for vehicles with removable tops.Continuation Mode:(Automatic transmission only)While your vehicle is running with your key, press button II for 2 seconds,you are now in the continuation mode. Your engine will continue running for thepreset time even if you take your key out the ignition. Example:For a quick stop when you don’t want to restart the vehicle.
Page 12Important!When the vehicle shuts off after reservation mode, theYoung Shin Electronics, Inc system will lock/arm the vehicle. Take care to notlock your keys inside.Activating Reservation Mode(Manual Transmission only)Step1 : After arriving at your destination, and BEFORE TURNING YOUR ENGINE OFF, place the transmission in the Neutral position.Step2 : Activate the parking brake.Step3 : Remove your foot from the foot brake.Step4 : Remove the key from the ignition, and the engine will remain running.Step5 : Exit the vehicle and close the door within two minutes after activating the parking brake. The engine will shut off and reservation mode for the remote starter is now complete.Your vehicle is now ready for auto-starting. However, the reservation mode will be cancelled if the door is opened or the Young Shin Electronics, Inc. system is putin Valet mode after the reservation has been set. Once cancelled, you will have tostart the vehicle with the manual key and repeat the above 5 steps if you want torestore reservation mode. Important requirements to activate Reservation ModeThe transmission must be in the NEUTRAL position. The vehicle windows must be rolled up. Do not set the reservation mode with people in the vehicle. Do not auto-start the vehicle with people in the it. Important!If you try to auto-start the vehicle when reservation modehas not been set, the auto-start feature will not work. When you press the auto-start button, the remote will beep three times. The carparking lights will flash three times, pause, then flash seven times. Page 13If you do not want to set reservation mode, shut off the engine before you exit the vehicle. The engine will shut off for the following reasons: - You did not activate the parking brake or pressed the foot brake when you turned the manual key to the off position. - You released the parking brake while the engine was running. - You entered Valet Mode after the Reservation Mode has been completed. Canceling Reservation ModeTrunk ReleasePress Button III for 2 seconds in order to unlock and release your trunk. Note that, the trunk release function will not only release the trunk, but will unlock all the doors as well. Query Function allows the you to visually monitor the status of your car bylooking at the remote-pager GLO LCD icons. Press button IVfor a 1/2second to activate the Query Function.Query FunctionPanic ModePress buttonIVfor 2 seconds to enter Panic Mode. In this mode, the car will arm, if not armed already, and the siren/horn will activate and the parking lights will flash. In order to disengage Panic Mode, press button Ifor a 1/2 second. Then, press button Ifor a 1/2 second to unlock/disarm your vehicle.If Anti-Jacking option has been programmed (ask your dealer if youwould like to have this option) and the Ignition-Kill has been installed , the Panic Mode works as Anti-Jacking if the key is in the ignition. If Anti-Jacking mode is activated while key is in the ignition,a)The siren will go off for 1.5 minutes, and b) Ignition-Kill will be activatedafter the first 30 seconds. This is to give a 30 second warning to the hijacker,then to disconnect the ignition to stop the vehicle.
Page 14While the vehicle is in valet mode, only the keyless entry function will be available.Valet Mode is very useful when loaning your vehicle or having it serviced.In order to enter Valet mode, press Buttons (I+III)simultaneously for a 1/2 second. In order to manually enter Valet Mode, insert your key into the ignition and turn the ignition on, then off,(between ACC and ON)five times within 10 seconds.Valet ModeYou can exit Valet Mode only by pressing Buttons(I+III)simultaneously for a 1/2 second. Timer Start ModeIn Timer Start Mode, your car automatically starts every 1.5 or 3.0 hours, depending on preset options during the time of installation, for a 24-hour period. This mode is cancelled automatically after 24 hours or once you start your car with either the key or remote-pager. In order to enter Timer Start Mode, press Buttons (II+IV)simultaneously for a 1/2 second.Also, note that Timer Start Mode becomes Cold Start Modeonce an optional temperature sensor is installed. Important!Timer Start Mode should be used only in open areas. Never start and run the vehicle in an enclosed space such as a garage or carport.Safety Shut Down FeaturesThe Young Shin Electronics, Inc. 2WAMR system has several shut down safety features. The following actions will shut down the engine or prevent the car from auto-starting : Opening the hood, pressing the brake, or if Valet Mode is turned on.Page 15The optional RPS is a feature that allows an individual to page you by simply tappingon the front windshield of the vehicle. RPS is automatically turned on upon activatingalarm mode (pressing button I for a 1/2 second) on the Young Shin Electronics, Inc.2WAMR .The RPS module can be activated by tapping a key on the glass, opposite of the sensor, producing a high-frequency vibration. This high-frequency vibration is detected and your remote-pager will beep and a telephone icon will appear on theGLO LCD indicating that someone is paging you from your vehicle. Press Button I, II, III or IVfor a 1/2 second to deactivate the RPS visual and audiblepaging alerts.RPS (Remote Paging System)OPTIONAL PROGRAMMABLE FEATURESThese additional programmable features can be programmed to the Young ShinElectronics, Inc. system by your authorized Young Shin Electronics, Inc. dealer. Ignition LockAutomatic Transmission Vehicles:This progammable option will automatically lock the vehicle doors once the key is in the ignitionand the brake pedal is pressed. The doors will unlock as soon as the key is removed from theignition.Manual Transmission vehicle:This progammable option will automatically lock the vehicle doors once the key is in the ignitionand the brake pedal is pressed. The doors will automatically unlock when the emergencybrake is set while the vehicle is running with the key.You can turn this function on or off by pressing buttons (II+III)for a 1/2 second. When set to passive arming, your security system will arm automatically 30 seconds after all the car doors are closed. There are two types of passive arming that can be programmed by your Young Shin Electronics, Inc dealership: (1) passive arming with passive lock and (2) passive arming with active lock.Passive Arming
Passive locking means the door will lock when the system passively arms. In the default factory setting, the system is armed and locked actively, which meansthe system will only arm/lock when the remote-pager is utilized.Page 16Turbo ModeIf this optional Turbo Mode has been programmed at the time of installation,you can turn this feature on and off by pressing Buttons (III+IV)for a 1/2 second.In this mode, if the emergency brake has been set, the engine will continue to runafter the key has been taken out of the ignition. It will run until two minutes after theemergency brake has been set.To utilize this mode, the emergency brake sensing wire has to be connected to theemergency brake wire of the vehicle. Consult the authorized dealer for this mode. This option is ideal for turbo-charged vehicles because it allows the turbo too slowlycool after operation.Optional Auxiliary 1 & Auxiliary 2The auxiliary output system is an optional feature that can be tailored for your vehicle by your local authorized Young Shin Electronics, Inc dealership. For example,you can customize your car to have remote power control of your windows, radio,and sunroof in addition to the rooftop on your convertible car.Page 17OPTIONAL INSTALLATION FEATURES The Young Shin Electronics, Inc 2WAMR remote-pager has additional features andexpansion possibilities that may require additional parts and labor.Cold Start ModeIf the optional temperature sensor has been installed,Timer Start Mode becomes Cold Start Mode. In this mode, your car will automatically start if the temperature of the inside of the vehicle goes below the preset temperature. The minimum interval between the starts will be 1.5 or 3.0 hours depending on preset options during the time of installation. Cold Start Mode is activated or deactivated by pressing Buttons (II+IV)for a 1/2 second.
Page 19Young Shin Electronics, Inc. is not RESPONSIBLE OR LIABLE FOR ANY DAMAGESWHATSOEVER,INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAM-AGES, INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE that may or may not resulted from the operation ofYoung Shin Electronics, Inc. NOT WITH STANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITEDWARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE. Your WarrantyThe product’s warranty is automatically void if its date code or serial number is defaced, missing or altered. This warranty will not be valid unless you have completed the registration card and mailed it to Young Shin Electronics, Inc, within 10 days after the purchase to the address listed on the registration card.Young Shin Electronics, Inc. Warrants to the original purchaser that this product shall befree of defects in material and workmanship under normal use and circumstances for theperiod of time that the original owner of this product owns the vehicle in which it isinstalled ; except that the remote controller unit for the period of one year from the date of installation to the original owner of this product. When the original purchaser returns the product to the retail store where it was purchased or prepaid postal to Young Shin Electronics, Inc., 3415 S. 116th St Seattle,WA 98168, USA within the warranty period, and if the product is defective,Young ShinElectronics, Inc., will at its option repair or replace such.TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUDED BY THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE STREAM OF COMMERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO, THE EXCLUSION OF ANY AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF NON-INFRINGEMENT OR PATENTS, IN THE UNITED STATES OF AMERICAAND/OR ABROAD. NEITHER THE MANUFACTURER OF ANY ENTITIES CONNECTED THEREWITHSHALL BE RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTALDAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIALLOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights, and you may also have other rights, which vary State to State.Limited Lifetime Consumer WarrantyPage 18

Navigation menu