Yousheng Smart S80 Health Wristband User Manual user manual

Download:
Mirror Download [FCC.gov]
Document ID	4042775
Application ID	1PqkSulsH+lveQHQ44iXEA==
Document Description	user_manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.45kB (330675 bits)
Date Submitted	2018-10-21 00:00:00
Date Available	2018-10-21 00:00:00
Creation Date	2018-10-18 11:17:27
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2018-10-18 11:38:19
Document Title	user_manual
Document Creator	Microsoft® Office Word 2007
Document Author:	test

User Instructions
1.Introduction
and
how to wear
1)Packaging List
1.Wristband *1
2.Gift box *1
3. User manual *1
4.Charger *1
2.How to wear
It is best to wear the wristband right under unlar styloid and tighten the
band by adjustment hole.The heart-rate senor should be close to skin and
avoid moving.
3.How to charge
Please make sure wristband is not out of battery when use it for the first
time .It will not be able to start if battery is too low,please charge it by
insert the wristband USB connector to USB port from computer or USB
charger. Then it will start automatically.(Tips: Please remove the strap with
the bending direction itself,otherwise you may break off the charging plug)
Charge Votage:5V Charge Current:100MA
Charge Time: 80Minutes.
4.Main Functions Interface
a.Time&Date
After the device has been connectedvia Bluetooth successful with your
phone,the time will auto synchronize correctly with your phone
–Bluetooth icon appear means connected.
b.Pedometer
Record steps,real-time pedometer.
c.Distance
Calculate working distance according to pedometer and personal BMI set
from APP.
d.Clories
Calculate calorie which burned everyday.
e.Running Mode
On the running interface, long press to enter into running mode. while in
running mode, to change between real time running data ,and pause and
exit screens, click the button. Data screens display running time, heart rate,
running distance, calories, and steps in real time. While in the pause and
exit screen, long press to pause or exit running mode.
f.Blood Pressure Monitor
Press the touch button and scroll to the blood pressure monitor
screen.stay still and the device will start measuring your blood
pressure .Please note you cannot save the reading by manually starting
the function,to save the reading you must go through the app on your
smart phone device.
g.Heart Rate Monitor
Press the touch button and scroll to the heart rate monitor screen,to get
accurate resuit,the heart rate icon will flicker,and the back LED will light
when test.You can manually view your heart rate by scrolling to this
screen.
The app will automatically record your HR every 30Mins and this data is
stored in the app on your smart phone if you turn on HR automatic
monitoring on app settings.
h.Sleeping Monitor
Device will monitor sleeping data automatically, please check the sleeping
detail data on App Dashboard.
6.Find smart phone
Press and hold to find smart phone when bulebooth connected
7.Turn Off
Press and hold to turn off the device
8.Bluetooth paring
a.turn on the smart bracelet.
b.Turn on the Bluetooth of your smart phone.
c.Download H Band APP on your smart phone by scan the below QR
code.
d.Taping the Device on the setting of the APP, then the devices Bluetooth
name will appear, select to get pair.
After Bluetooth paired there will be a Bluetooth icon---appear on the
Date and time screen.
9.Bluetooth Remove
a.delete the Bluetooth on the APP
b.Turn off the APP on the smart phone
c.Remove the Bluetooth on the setting of the smart phone.
10.How to use APP
After install H Band APP, you may required to fill your personal
information such as gender、weight etc . Then please connect smart
bracelet via Bluetooth(please reference to the Bluetooth Paring steps)
Dashboard:
Your can check all data here, today, yesterday and data summary.
a.Step: tap to check steps、Distance Calorie data.
b.Sleep:tap to check sleeping data here(such as sleep duration, deep
sleep, light sleep etc).(picture1)
c.Heart Rate:
(1)Check your all day heart rate data. which record your heart rate
data every 30minutes by device automatically, after you turn on HR
automatic monitoring on APP settings(picture2)
(2)Tap heart rate icon to get start heart rate function on
device.(picture3)
11.Blood pressure:
(1)check blood pressure data
(2)Tap blood pressure icon get start blood pressure function.(please
stay still when test the blood pressure) after finished, you can select
save to store data for reference.
There is two BP test mode : Normal and Personal.
Generally please select Normal mode, if special person(hypertension
or hypertension) please select Personal mode, and select on my Device
of BP private mode and set your data as well on settings at the same
time.
12.Running:
Tap to get start the movement, and allow get your position, pull down
the page, you can tap stop to finish record. Each start and stop is a
complete record of the movement, record including the activity time,
speed , calorie, moving routes etc.
13.Settings:
(1)My device: tap to find device name to get paire.
a. Message notification: select the notification of phone calls and
messages to get reminder.(paring request appears on APP when
Bluetooth connect with IOS system smart phone, please select“pair”to
get messages push from the smart bracelet, select“no”for no need
messages push.)
b. Alarm setting: set alarm clock.
c. Sedentary setting: set sedentary remind
d. Heart rate alarm: set heart rate test resuit reminder when out of your
setting range. (under condition of auto heart rate test)
e. Turn the wrist: set the auto screen light time when turn the wrist.
f. Pair devices: after turn on this function the data on the app can be
upload to the cloud.
g. BP private mode: for the hypertension or hyotension one, ste your
personal-tailored BP mode range to obtain more accurate test data.
h. Switch setting: 1.wear test: turn on this function device will detect
whether device wear on the wrist or not, when green light sensor start
test, if device not wear on the wrist device will stop test.
2.HR automatic monitoring: turn on app will automatically read your HR
evey 30 mins and this data is stored in the app on your smart phone.
I. Take photo: shake smart bracelet to take photos.
j.Reset password: you can reset password to set the device be your
personal use.( meaus other mobile phone can not connect with your
device.) if your forget the password, please turn to the device sleep
screen press and hold till device Vibration then the password will be
reset to original 0000.
New function
Main interface style settings : click this function to select different main
interface styles according to your preferences.
Physiological Period Reminder: this feature can be used as a timely
reminder of the use’s different physiological states. ( note: only when
gender is female can this function be turned on )
FCC Statement
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that
may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : test
Create Date                     : 2018:10:18 11:17:27Z
Modify Date                     : 2018:10:18 11:38:19+08:00
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : test
Creator Tool                    : Microsoft® Office Word 2007
Metadata Date                   : 2018:10:18 11:38:19+08:00
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:f4f6494f-1449-42a8-a61e-44bb7c2a5100
Instance ID                     : uuid:d24149c4-d14b-43da-90f3-0e0631a682ba
Page Count                      : 7

EXIF Metadata provided by EXIF.tools