Yun Tong Electronic UWT-201X UWSB-System 2.1x-W User Manual WASP UMLF2 1 2012 Rev1

Yun Tong Electronic (ShenZhen) Co.,Ltd UWSB-System 2.1x-W WASP UMLF2 1 2012 Rev1

UserManual.wiki >

Yun Tong Electronic >

UWT 201X User Manual

UWT-201X_User Manual_REV1

Wireless Audio Solution ProductsCopyright WASP® 2012, All rights reserved UMLF2.1-2012 Rev1LINK-Family™2.1 SystemUWT-201xAUXPAIRINGSTATUS34567812PAIRINGSTATUS34567812Universal DC Platewith Sub Out - UDC-101xDesigned in USA Manufactured in ChinaDC INPUT+-24 V 2.5 ASUB OUTPrinting is Pantone Mettalic 877CTHe word WASP is in tool, others are printedUDC-101xUNIVERSAL DC PLATE WITH SUBWOOFERRevision: 3 Date: 5/27/12DC Input Label is 45 mm W x 26 mm H with 2 mm radius Printing on Label is in Pantone Metallic 877C Label color is Pantone 419CUniversal DC Platewith Sub Out - UDC-101xDesigned in USA Manufactured in ChinaPAIRINGSTATUS34567812Universal DC Platewith Sub Out - UDC-101xDesigned in USA Manufactured in ChinaDC INPUT+-24 V 2.5 ASUB OUTPrinting is Pantone Mettalic 877CTHe word WASP is in tool, others are printedUDC-101xUNIVERSAL DC PLATE WITH SUBWOOFERRevision: 3 Date: 5/27/12DC Input Label is 45 mm W x 26 mm H with 2 mm radius Printing on Label is in Pantone Metallic 877C Label color is Pantone 419CUniversal DC Platewith Sub Out - UDC-101xDesigned in USA Manufactured in China+PAIRI+PAIRILINK-Mount™ LINK-Plate™ LINK-InWall™

Thank You for choosing WASP® - Wireless Audio Solution Products™ Your professional integrator has been chosen for their knowledge in providing custom audio and video solutions and providing only the best in class product’s from leading manufacturers. WASP® select’s only the best professional custom integrators to offer our products. Our authorized custom integrators have been trained and have complete knowledge of all WASP® products usage and installation.In order to provide you with the proper service before, during, and after the installation WASP® has employed a strict “NO INTERNET SALES POLICY”. WASP® does not endorse the sale or promotion of its products via the internet nor does it tolerate these actions from third parties. Any WASP® product that is sold via any type of e-commerce transaction automatically voids the manufacturer's warranty. WASP® products are engineered to be the Best-In-Class and provide the custom integrator with patent pending high performance wireless audio solutions not available anywhere else. All WASP® products are proudly engineered in the U.S.A and manufactured to give unparalleled performance and reliability by choosing only the best in materials and workmanship.We are so conﬁdent with our product’s we are proud to provide you with an outstanding warranty as stated on the attached certiﬁcate should you ever need service. In order to provide you with any updates regarding your product or new products as they become available please register it at www.waspaudio.com/product/warranty.registrationRather than spend money on public advertising campaigns, WASP® re-invests into research and development to continue to provide the custom integrator and you with the most innovative wireless audio solution products. Therefore we ask that if you are happy with the performance of your purchase please tell a friend, if not please tell us.Sincerely,The WASP® Te amWireless Audio Solution ProductsCopyright WASP® 2012, All rights reserved UMLF2.1-2012 Rev1

READ FIRST!CAUTION: Risk of Electrical Shock - Use in Dry Locations OnlyCAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts – refer servicing to qualiﬁed service personnel only. WARNING: To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or moisture.IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions. Keep these instructions. Heed all Warnings. Follow all instructions.2. Do not use this apparatus near water. The apparatus shall not be exposed to dripping or splashing and that no objects ﬁlled with liquids, such as vases, shall be placed on apparatus.3. Clean only with a dry cloth.4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.6. Only use attachments/accessories speciﬁed by the manufacturer.7. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.8. Do not exceed manufacturers weight capacity of speaker bracket9. NOT FOR USE WHERE EXPOSED TO THE WEATHERWireless Audio Solution ProductsCopyright WASP® 2012, All rights reserved UMLF2.1-2012 Rev1

INSTALLING LINK-Family™ 2.1 SystemRefer to LINK-Family™ Authorized Dealer Installation ManualWASP® Products are SOLD and Installed Only by Authorized Dealers!For list of Authorized Dealers please go to www.waspaudio.com/authorized.dealers Or contact us at:WASP Audio Technologies CorporationP.O. Box 746Webster, MA 01570508-986-9277 (WASP)Wireless Audio Solution ProductsCopyright WASP® 2012, All rights reserved UMLF2.1-2012 Rev1

Possible causes of interference with your LINK-Mount™ SystemA) Metal studs, in fact any metal wall material, can cause the signal to be diminished or lost. This may also be a problem if your wall paper happens to be a foil type or have metal ﬁbers in it.B) Microwave ovens, when operating, may degrade or interrupt the signal from your transmitter. Usually this will only be a problem for those speakers in close proximity to the microwave. For best results, do not locate the transmitter near your microwave.C) Certain portable phones operating in the 2.4 or 5.8 GHz range, wireless computer routers, and other consumer electronics and toys using 2.4 or 5.8 GHz may cause interference when operated too close to either the transmitter or the LINK-Mount™ .THIS DEVICE COMPLIES WITH FCC RULES PART 15.Operation is subject to the following four conditions:(1) !This device may not cause harmful interference and(2) !This device must accept any interference received including that may cause undesired operation and(3)!This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Conﬁgurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”(4) This device within 5.15-5.25GHz band is restricted to indoor operations.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.CAUTION: Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Wireless Audio Solution ProductsCopyright WASP® 2012, All rights reserved UMLF2.1-2012 Rev1

General guidelines for your LINK-Family™ System:IssuePossible FaultFixNo Sound from SpeakerIf LED is ﬂashing, LINK is interrupted. RE-Link by pressing and releasing “Link” button on back of transmitter and then press and release “Link” button on LINK-Mount™ bracket LED is OFF on LINK-Mount™ or WASP® transmitter.Check WASP® power supply to ensure it is plugged into outlet or surge suppressor. Check outlet for power by plugging in a lamp. If no power contact electrician. If power supply has been plugged into “switched” outlet move to non-switched outlet. If power is present but still no sound source may not be on: Contact WASP® Authorized Dealer. If used as surround sound speakers there may not be any sound during certain scenes of movie. You may be be listening to movie or show in with limited surround soundConﬁrm home theater receiver is in desired listening mode for surround sound.LED is OFF on any WASP® deviceNo signal from source receiver.Turn source on and turn volume up slowly until blue light comes on transmitter. Check WASP® power supply to ensure it is plugged into outlet or surge suppressor. Check outlet for power by plugging in a lamp. If no power contact electrician. If power supply has been plugged into “switched” outlet move to non-switched outlet. If power is present but still no sound contact WASP® Authorized Dealer.LED lights are ﬂashingInterference with wireless linkContact WASP® Authorized Dealer.Wireless Audio Solution ProductsCopyright WASP® 2012, All rights reserved UMLF2.1-2012 Rev1

Speciﬁcations*:Transmitter:Wireless Frequency2.4GHz, 5.2 GHz, 5.8 GHzPower Supply7V-DC (refer to power supply label)FCC ID#P44UWT-201XLINK-Receiver™: UWSB, UWIW, UWSP Wireless Frequency2.4GHz, 5.2 GHz, 5.8 GHzPower Supply24V-DC (refer to power supply label)FCC ID#P44UWSB-P-50X-1Power50W, 20Hz-35kHz, +0-3dB, THD .02% 1WWireless Audio Solution ProductsCopyright WASP® 2012, All rights reserved UMLF2.1-2012 Rev1*Speciﬁcations subject to change without notice.

For any other questions regarding your WASP®- Wireless Audio Solution Productplease contact your Authorized Dealer:Dealer Name:____________________________________ Dealer Contact:__________________________________Phone:__________________________________________Email:__________________________________________Date Professionally Installed: ____/____/_____________ Model Number:__________________________________Serial Number:___________________________________or contact WASP® atWASP Audio Technologies CorporationP.O. Box 746Webster, MA 01570508-986-9277 (WASP)www.waspaudio.comWireless Audio Solution ProductsCopyright WASP® 2012, All rights reserved UMLF2.1-2012 Rev1