Yuneec Technology ST24 Smart Radio Transmitter User Manual ST24 Quickstart

Download:
Mirror Download [FCC.gov]
Document ID	2600864
Application ID	sTeI4NCITzD7YIATi65DSQ==
Document Description	Users Manual_Quickstart
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	65.71kB (821358 bits)
Date Submitted	2015-04-30 00:00:00
Date Available	2015-05-04 00:00:00
Creation Date	2015-04-16 15:12:35
Producing Software	Adobe PDF library 11.00
Document Lastmod	2015-04-16 15:12:35
Document Title	ST24 Quickstart 认证
Document Creator	Adobe Illustrator CC 2014 (Windows)

Yuneec™
SMARTRADIO™
ST24™ QUICK START GUIDE
FEATURES
Transmitter and Ground Station – All in One
The ST24 is not only an advanced 24-channel RC transmitter – it’s also a powerful Personal
Ground Station (PGS) that includes built-in hardware and functionality for First-Person View
(FPV), a flight simulator and an Android™ tablet/pad. With the convenient and portable ST24 it’s
no longer necessary to use separate components to view and even record real-time video during
flight.
Improved Radio Diversity and Range
Dual 2.4GHz antennas are installed in the ST24 to improve radio transmission diversity and
range. The result is a more reliable radio link with range that exceeds typical line of sight operations.
Two-Way Communication With Telemetry
The ST24 not only transmits control information, it also downloads vital aircraft status information. During flight the pilot can see telemetry data including real-time battery voltage, signal
strength, aircraft altitude, airspeed, distance from home and more right on the screen.
Extended-Range Video Downlink
The built-in 5.8GHz video downlink makes it possible to view real-time video on the ST24’s 7”
LCD screen. And when used in conjunction with the Yuneec C-GO1 camera or other Flying Eyes
downlink transmitters, range can be up to 2,600 feet (800 meters) or more.
Universal Channel Control System
The Universal Channel Control System offers an innovative and revolutionary way to view, set
and adjust every channel. From input devices and hardware to output channels and functions,
every setting and adjustment including reversing, dual rates, mixing and more is found in a single
menu. No longer do you need to struggle with cumbersome sub-menus or difficult to understand
abbreviations – the ST24 makes it easier to see and customize more channel settings than any
transmitter before.
Built-In Flight Simulator
You can use the built-in Android™ app based flight simulator to enjoy the convenience and benefit of learning or practicing to fly using the same transmitter and controls you’ll actually be flying
with.
Built-in Android™ Tablet/Pad
The built-in Android tablet/pad makes it possible to listen to music, watch videos, run apps and
more. And when you’re connected to WiFi you can even check email, surf the web and upload
your latest photos and videos without the need for a separate device. This means you have more
functionality, flexibility and convenience packed into your very own Personal Ground Station
(PGS).
IMPORTANT NOTE: This Quick Start Guide is NOT intended to replace the complete content
included in the ST24 instruction manual. Although the following information covers some of the
basic details you need to know we strongly recommend reading through the instruction manual
completely before charging/using the ST24.
CHARGING YOUR ST24
Use a suitable power source/supply (1.5A and 5V MAX output) and a cable with a Micro USB
connector to charge the 3.7V Li-Ion battery installed in the ST24. The time it takes to fully charge
the battery will depend on the current voltage/charge state of the battery and the charge rate of
your chosen power source/supply. For reference it will typically take approximately 6 hours to
charge a near fully discharged battery at the maximum recommended charge rate of 1.5 amps.
1. Connect the cable with the Micro USB connector to the suitable power source/supply
2. Connect the Micro USB connector to the corresponding port on the bottom of the ST24
3. When the transmitter is turned on the battery icon located in the upper right-hand corner of
the
screen (in select menus) will show a ‘plug’ inside while the battery is charging
You can also remove the battery from the back of the ST24 and charge it separately using a
suitable Li-Ion battery charger and a lead with a compatible 2-pin JST connector (at a maximum
recommended charge rate of 1.5 amps).
IMPORTANT NOTE: Charging the Li-Ion battery using an incompatible charger (such as a NiCd or
NiMH battery charger), or even a compatible battery charger with the incorrect settings, may
result in damage to the battery or even fire resulting in property damage and/or personal injury.
USING YOUR ST24
In the Radio Control (RC) Mode
For RC-only (non-FPV/camera-equipped) models
1. Power on the ST24 and enter RC mode
・ Slide the Power Switch to the left to power on the ST24
NOTE: The switch does not extend beyond the surface of the transmitter tominimize the risk
of accidentally powering the transmitter off during use
Power Switch
・Tap the RC button/icon
・Tap the Model Select button/icon
・ Select the type of model (Multi-copter, Airplane, etc.) you’d like to create or load
・Select an existing model or create a New Model
・To create a new model tap the New Model button/icon
・ Give the new model a name, take or select an image (optional), select a type (if applicable)
then Save the new model
2. Bind the ST24 to your receiver/model
・ Follow the instructions included with your receiver/model to enter the bind mode
・ Tap the System Settings button/icon
・ Tap the Refresh button/icon
・ Select the corresponding ID of the receiver/model
・ Tap the Bind button/icon
・ The receiver/model should now be bound to the ST24. Or, if the receiver/model was not bound
successfully repeat the steps outlined above to complete the binding process.
3. Define the channels
・Return to the main RC Mode screen (tap the ’Back’ or ‘Home’ icons located near the bottom of the
screen as needed)
・ Tap the Channel Settings button/icon
NOTE: If the ST24 did not recognize the receiver/model and automatically identify the number
and type of channels a corresponding menu will pop-up and you will be prompted to set the
number of analog and switch channels accordingly
・Select the output channel/function (Thr, A01, etc) you’d like to view
・If you prefer to change the default input device/hardware (J1, K2, S3, etc.) set to control the selected
output channel/function, tap the corresponding input device/hardware button then tap Deactivate and
proceed to the following steps
・ Select the new input device/hardware to control the selected output channel/function by tapping
the desired input device/hardware button, then tap Edit to adjust the corresponding details (reverse,
travel adjustment/rate, speed,etc.)
NOTE: You can set Priority, Edit, Deactivate or view the Properties of each channel.
You can also define which switch controls the Flight Mode.
・ There are multiple levels of mixing priorities. The highest level input device/hardware will be processed first.
・There are multiple types of basic expo and control curves that can be selected for each output channel/function. If you want to adjust any curve you can use the buttons above and below the graph or
you can touch the curve on the graph directly.
・ Reverse, Dual Rate (D/R) and even output Speed can be changed as needed/preferred.
・ After making any changes you MUST tap the Save button to save them.
・ Return to the main RC Mode screen (tap the ’Back’ or ‘Home’ icons located near the bottom of the
screen as needed)
Using Your ST24
In the First-Person View (FPV) Mode
For FPV/camera-equipped models
1. Power on the ST24 and enter RC mode
・ Slide the Power Switch to the left to power on the ST24
NOTE: The switch does not extend beyond the surface of the transmitter to minimize the risk of accidentally powering the transmitter off during use
Power Switch
・ Tap the FPV button/icon
・ Tap the Model Select button/icon
・ Select the type of model (Multi-copter, Airplane, etc.) you’d like to create or load
・ Select an existing model or create a New Model
・ To create a new model tap the New Model button/icon
・ Give the new model a name, take or select an image (optional), select a type (if applicable) then Save
the new model
2. Bind the ST24 to your receiver/model
・ Follow the instructions included with your receiver/model to enter the bind mode
・ Tap the System Settings button/icon
・ Tap the FPV button/icon then press the Refresh button/icon
・ Select the corresponding ID of the receiver/model
・ Select the corresponding ID of the camera and/or downlink transmitter associated with your aircraft
NOTE: Follow the instructions included with your camera and/or downlink transmitter if needed to
ensure they’re already bound to or that they can be bound to the ST24
・Tap the Bind button/icon
・The receiver/model should now be bound to the ST24. Or, if the receiver/model was not bound
successfully repeat the steps outlined above to complete the binding process.
3. Define the channels
・ Return to the main FPV Mode screen (tap the ’Back’ or ‘Home’ icons located near the bottom of the
screen as needed)
・Tap the Channel Settings button/icon
NOTE: If the ST24 did not recognize the receiver/model and automatically identify the number and
type of channels a corresponding menu will pop-up and you will be prompted to set the number of
analog and switch channels accordingly
・ Select the output channel/function (Thr, A01, etc) you’d like to view
・ If you prefer to change the default input device/hardware (J1, K2, S3, etc.) set to
control the selected output channel/function, tap the corresponding input
device/hardware button then tap Deactivate and proceed to the following steps
・ Select the new input device/hardware to control the selected output
channel/function by tapping the desired input device/hardware button, then tap
Edit to adjust the corresponding details (reverse, travel adjustment/rate, speed,etc.)
NOTE: You can set Priority, Edit, Deactivate or view the Properties of each channel.
You can also define which switch controls the Flight Mode.
・ There are multiple levels of mixing priorities. The highest level input device/hardware will be processed first.
・There are multiple types of basic expo and control curves that can be selected for each output channel/function. If you want to adjust any curve you can use the buttons above and below the graph or
you can touch the curve on the graph directly.
・Reverse, Dual Rate (D/R) and even output Speed can be changed as needed/preferred.
・ After making any changes you MUST tap the Save button to save them.
・ Return to the main FPV Mode screen (tap the ’Back’ or ‘Home’ icons located near the bottom of the
screen as needed)
・ Tap the Take Off button/icon when you are ready to fly
USING YOUR ST24
In the Simulator (SIM) Mode
Power on the ST24 and enter SIM mode
・ Slide the Power Switch to the left to power on the ST24
Power Switch
・ Tap the SIM button/icon
・ Follow the on-screen instructions
USING YOUR ST24
In the Tablet/Pad (PAD) Mode
Power on the ST24 and enter PAD mode
・ Slide the Power Switch to the left to power on the ST24
Power Switch
・ Tap the PAD button/icon
・ Use the LCD screen as a typical Android™ tablet/pad
©2014
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can
be used
in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c011 79.156289, 2014/03/31-23:39:12
Format                          : application/pdf
Title                           : ST24 Quickstart 认证
Metadata Date                   : 2015:04:16 15:12:35+08:00
Modify Date                     : 2015:04:16 15:12:35+08:00
Create Date                     : 2015:04:16 15:12:35+09:00
Creator Tool                    : Adobe Illustrator CC 2014 (Windows)
Thumbnail Width                 : 236
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 22334 bytes, use -b option to extract)
Instance ID                     : uuid:983732f2-3808-4ddb-946d-75633ec670fd
Document ID                     : xmp.did:b533f7e5-02ef-7446-93a5-fd196e5554aa
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:d63b4f3b-fe9b-e54f-a6e4-2e14352b5a14
Derived From Document ID        : xmp.did:d63b4f3b-fe9b-e54f-a6e4-2e14352b5a14
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, converted, saved, saved
History Instance ID             : xmp.iid:08eb3f6b-1cb1-fb45-b0aa-d320e47f33a2, xmp.iid:50b3a11d-cdda-164f-b754-ce24bbc7d92a, xmp.iid:c6c0c478-b447-7e4d-b868-d85073f7f46a, xmp.iid:b533f7e5-02ef-7446-93a5-fd196e5554aa
History When                    : 2015:04:15 16:54:54+08:00, 2015:04:16 15:05:23+08:00, 2015:04:16 15:07:59+08:00, 2015:04:16 15:11:12+08:00
History Software Agent          : Adobe Illustrator CC 2014 (Windows), Adobe Illustrator CC 2014 (Windows), Adobe Illustrator CC 2014 (Windows), Adobe Illustrator CC 2014 (Windows)
History Changed                 : /, /, /, /
History Parameters              : from application/postscript to application/vnd.adobe.illustrator
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : 201410111-ST24.png, 201410111-ST24.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041016053118.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041016063325.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041016053118.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041016053118.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041016042481.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041016042481.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015562507.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015562507.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015562507.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015562507.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015525109.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015525109.png, C:\Users\Administrator\Desktop\ST24截图\豌豆荚截图20150416142858.png, C:\Users\Administrator\Desktop\ST24截图\豌豆荚截图20150416142858.png, C:\Users\Administrator\Desktop\ST24截图\豌豆荚截图20150416142329.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015525109.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015525109.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041016063325.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015433305.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015433305.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015433305.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015433305.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015424999.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015424999.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015424999.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015410671.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015410671.png, 201410111-ST24.png, 201410111-ST24.png
Manifest Reference Document ID  : 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
Manifest Reference Instance ID  : 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
Ingredients File Path           : 201410111-ST24.png, 201410111-ST24.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041016053118.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041016063325.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041016053118.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041016053118.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041016042481.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041016042481.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015562507.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015562507.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015562507.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015562507.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015525109.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015525109.png, C:\Users\Administrator\Desktop\ST24截图\豌豆荚截图20150416142858.png, C:\Users\Administrator\Desktop\ST24截图\豌豆荚截图20150416142858.png, C:\Users\Administrator\Desktop\ST24截图\豌豆荚截图20150416142329.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015525109.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015525109.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041016063325.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015433305.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015433305.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015433305.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015433305.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015424999.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015424999.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015424999.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015410671.png, F:\0制作文件\E AI制作文件及版本升级\TONOTAL H920\说明书\st24截屏\2015041015410671.png, 201410111-ST24.png, 201410111-ST24.png
Ingredients Document ID         : 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
Ingredients Instance ID         : 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 20.999997
Max Page Size H                 : 95.108910
Max Page Size Unit              : Centimeters
Font Name                       : Lato-Medium, Lato-Bold, AdobeSongStd-Light
Font Family                     : Lato, Lato, Adobe 宋体 Std
Font Face                       : Medium, Bold, L
Font Type                       : TrueType, TrueType, Open Type
Font Version                    : Version 2.010; 2014-09-01; http://www.latofonts.com/, Version 2.010; 2014-09-01; http://www.latofonts.com/, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False
Font File Name                  : Lato-Medium.ttf, Lato-Bold.ttf, AdobeSongStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 172 C 2
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants L       : 59.215698
Swatch Groups Colorants A       : 69
Swatch Groups Colorants B       : 67
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000000
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003100
Swatch Groups Colorants Black   : 0.003100
Producer                        : Adobe PDF library 11.00
Page Count                      : 4
Creator                         : Adobe Illustrator CC 2014 (Windows)

EXIF Metadata provided by EXIF.tools