Yunmai Technology M1601 Yunmai 2 Smart Scale User Manual SE YUNMAI2

Download:
Mirror Download [FCC.gov]
Document ID	3240762
Application ID	AN19U+/TukoHcyNzo+m5TA==
Document Description	M1601 Manual Rev. 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	122.81kB (1535167 bits)
Date Submitted	2016-12-27 00:00:00
Date Available	2016-12-27 00:00:00
Creation Date	2016-12-05 23:45:52
Producing Software	Adobe PDF library 15.00
Document Lastmod	2016-12-22 18:00:10
Document Title	SE&YUNMAI2
Document Creator	Adobe Illustrator CC 2015 (Windows)

Product Introduction
1 Activation
3 Get Connected
3-2 Connect via WiFi
4 Start Using
Thank you for choosing YUNMAI 2 Smart Scale
Place YUNMAI 2 on a flat floor and press the surface until the
screen shows “YUNMAI” to activate it.
Please lay the scale at a place with strong WiFi signal or near
the router when it first get connected. WiFi signal will influence
connecting time and stability.
Under WiFi mode, as long as the scale and the phone are
placed in the scope of the WiFi, then the data will be
synchronized automatically to the App even without opening it.
Open WiFi option on the phone and YUNMAI App and get
connected as the following instructions:
Set each foot on each side of the central point naturally
as shown below:
Place in the scope of WiFi in first connection
3-1 Connect to the scale via Bluetooth
Me
Open YUNMAI App and Bluetooth and it will get connected automatically,
and your real-time data will sync to the App.
2 App Installation
1 Click on【Me】
Device
Correct
Each foot on each side
of the central point
naturally
Wrong
Feet go out of the verge
may affect the accuracy
Wrong
Stand in wrong direction
will shield the screen
Wrong
Feet not in a line may
affect the accuracy
2 Click on【Device】
Search“YUNMAI” in the iOS App Store or Android Application
Market or scan the following QR Code to download, install it
and it will get connected to the scale once turned on.
PM
PM
Device Management
Cancel
connect to
“YUNMAI 2”
An application wants to open Bluetooth
An application wants to open Bluetooth
Scan QR Code
A ITO conductive coating x 4
B Concealed Display Screen
Reject Ignore
Searching...keep close to the device
smart scale
Allow
Allow
Download 
C Reset Key
YUNMAI 2
YUNMAI mini
smart scale
D USB Type-C charge port
E Speaker
iOS： Slide from the bottom
of the screen to open the
Control Center and click on
the【Bluetooth】 Logo
Display and Status
Body Statistics Table
Age
WiFi Connection
WiFi Signal Error
0-9.9%
18-39
Bluetooth
Body Fat
Alarm Clock
Muscle Ratio
Low
10-20.9% Normal
21-25.9% Slightly obese
26-60%
＜ 18.5 Underweight
40-59
Full Battery Power
11-21.9% Normal
＜51% Low
22-26.9% Slightly obese
≥ 51% Normal
27-60%
Low Battery Power
Obese
18.5-24.9 Normal
25-29.9 Overweight
30-34.9 Obese
≥ 35 Grossly Overweight
0-12.9% Low
Weight gained
60-120
Weight lost
13-23.9% Normal
24-28.9% Slightly obese
29-60%
Kg（Unit）
Body Fat
Age
Body Fat
0-9.9%
lb (Unit)
Upgrading
18-39
Obese
Low
10-33.9% Normal
Obese
＜ 18.5 Underweight
0-20.9% Low
Sunny
Cloudy
40-59
21-34.9% Normal
＜46% Low
35-39.9% Slightly obese
≥ 46% Normal
40-60%
Rainy
25-29.9 Overweight
30-34.9 Obese
≥ 35 Grossly Overweight
0-21.9% Low
Snowy
60-120
Temperature
Obese
18.5-24.9 Normal
22-35.9% Normal
36-40.9% Slightly obese
41-60%
Obese
Note: Juveniles have rapid physical developments and their body
statistics, such as body fat, BMI and muscle rate may fluctuate
largely, so it is difficult to get an accurate result except the
weight.
4 Finish the process as
indicated
FCC Statement
FCC ID: 2ADEB-M1601
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Measurement results of YUNMAI 2 is only for reference,
but professional medical advice.
Measurement Range: 3-150 Kg.
Safe Power Charging
Do not use low-quality plugs and cables.
Refrain from long-time charging in case of short circuit.
Do not charge in damp environment in case of electric
leakage.
Use a wet cloth to clean the scale.
Do not use any detergent and don’t use water to wash it
directly.
Warranty
34-38.9% Slightly obese
39-60%
Female
BMI
smart scale
iOS 8.0 and above
iPhone 4S/5/5S/6/6 Plus/SE/6S/6S Plus/7/7 Plus
iPod touch /iPad
Android 4.3 and above with Bluetooth 4.0
Maintenance
Muscle Ratio
YUNMAI Color
3 Click on
【Device Connection】
Mobile Device Support
Important Note
Obese
0-10.9% Low
Male
BMI
Android: Click on【Allow】
to turn on Bluetooth when
the system reminds you
when open YUNMAI App
YUNMAI 2 Smart Scale guarantees a year of technical
support and hardware warranty.
Note: To ensure the accuracy please stand on the scale barefoot
with the right posture.
Smart Scale Instructions
Product Specification
Product Name: YUNMAI 2 Smart Scale
Model : M1601
Measurement Unit: Kg /Lb
Connection : Bluetooth 4.0, WiFi
Size: 300 × 300 × 23 mm
Executive Standard: Q / HC 1 - 2015
Net Weight: 1.9 Kg
Weighing Range: 3 - 180 Kg
Accuracy: ±50g
Working Temperature: -5 ℃ - 40 ℃
Exterior Material: Eco-friendly ABS + PC
Battery Type : Li-Polymer Battery
For more information please visit www.iyunmai.com
Hotline: +86-755-8671-6230
Facebook : www.facebook.com/iyunmai
twitter: twitter.com/YunmaiGlobal
Manufacturer: Shenzhen YUNMAI Technology Co., Ltd
Address: Room 10D, 10F, 4C Building, Software Industry Base,
Nanshan District, Shenzhen, China
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Modify Date                     : 2016:12:22 18:00:10+08:00
Create Date                     : 2016:12:05 23:45:52+08:00
Metadata Date                   : 2016:12:22 18:00:10+08:00
Creator Tool                    : Adobe Illustrator CC 2015 (Windows)
Format                          : application/pdf
Title                           : SE&YUNMAI2
Document ID                     : uuid:a4d6f5cc-92c9-41fe-b471-f7050ec3894f
Instance ID                     : uuid:11adab17-e4c9-435f-8b14-b8287c663dbe
Producer                        : Adobe PDF library 15.00
Page Count                      : 1
Creator                         : Adobe Illustrator CC 2015 (Windows)

EXIF Metadata provided by EXIF.tools